Chromium pollution and its bioremediation mechanisms in bacteria: A review

Construction of hierarchical nanostructured surface on an organic hybrid selenidostannate with light trapping effect to achieve sunlight-driven environmental remediation

Due to the low intensity of sunlight, it is a great challenge to realize highly efficient sunlight-driven photocatalysis. To maximize the utilization of sunlight, increasing the light capturing ability of photocatalysts is a prerequisite to attain high catalytic performances. Due to the multiple reflections of light in the hierarchical nanostructures, constructing hierarchical nanostructured surface should boost the sunlight capturing ability of a photocatalyst. Herein we used a surface oxidation etching method to construct a hierarchical nanostructure on the surface of an organic hybrid selenidostannate [Bmim]4[Sn9Se20], namely BTSe. After 24 hours of etching by ammonium persulfate, the surface of BTSe-O24 turned into a hierarchical nanostructure. FDTD simulation proved that the hierarchical nanostructure can effectively decline the loss of incident light and enhance light capturing ability of BTSe-O24. As a result, BTSe-O24 can completely reduce Cr(VI) (100 mg/L) in 8 min with a conversion rate of 750 mg/(g h) under sunlight. The catalytic performance of BTSe-O24 under sunlight is even better than those of most reported photocatalysts under high-power xenon lamps. More importantly, BTSe-O24 can maintain high photocatalytic efficiency in the whole daytime (from 8:00 to 16:00 in autumn and winter). Our research opens a new perspective on the design of sunlight-driven photocatalysts.

Harnessing phytoremediation capabilities of nonedible energy plants for Cr6+ remediation and green energy perspectives: a review

Hexavalent chromium (Cr6+) pollution is a significant environmental and health risk. Phytoremediation, using green plants as solar-powered bioreactors, offers a sustainable reclamation method. However, managing the biomass generated post-remediation remains a challenge. To address this, bioenergy crops, known for their high biomass and biofuel potential, are increasingly used in phytoremediation. This research evaluates 13 non-edible bioenergy crops for their Cr6+ remediation efficacy, mechanisms, and post-remediation biomass management. These crops, including Jatropha curcas, Pongamia pinnata, and Ricinus communis, produce biodiesel from seeds, while others like Salix viminalis and Arundo donax yield bioethanol from biomass. Biodiesel yields from J. curcas, P. pinnata, M. ferrea, R. communis, E. camaldulensis, C. flexuosus, and J. gossypiifolia range from 23.9% to 75%. Bioethanol yields from S. viminalis, A. donax, T. domingensis, T. angustifolia, and T. latifolia vary from 3.19 to 51 g/L. These plants demonstrate significant Cr6+ uptake and detoxification through phytoremediation mechanisms such as phytoextraction, rhizofiltration, and phytostabilization, offering an eco-friendly alternative to conventional methods. Simultaneously, their biomass serves as feedstock for biodiesel, bioethanol, and bio-oil production, contributing to renewable energy systems. This synergy reduces risks of secondary pollution and aligns with global sustainability goals. The study emphasizes optimizing biomass conversion techniques, managing post-remediation residues, and leveraging genetic engineering to enhance plant efficacy. Future directions include scaling integrated phytoremediation-bioenergy systems and evaluating environmental, economic, and social impacts through life cycle assessments.

Augmenting Cr(VI) phytoremediation potential of Ricinus communis through rhizospheric crosstalk with multi stress tolerant plant growth promoting Bacillus altitudinis M1

Plant growth promoting rhizobacteria are cost-effective and eco-friendly alternative for bioremediation of Cr(VI). This study investigated the effects of rhizobacterial strain Bacillus altitudinis M1 on Cr(VI) reduction, plant growth promotion and Cr(VI) stress mitigation in Ricinus communis. Biosorption and bioreduction of Cr(VI) up to 300 mg/l by the strain M1 was confirmed by FTIR, Raman Spectrum and TEM-EDX analysis. Moreover, the strain M1 exhibited high tolerance to temperature (up to 40 °C), pH (up to 8.0), NaCl (up to 6%) and various heavy metals (Pb, Cd, Ni, Cu, Mn and Zn). The strain M1 produced significant IAA, ammonia and EPS under higher concentration of Cr(VI). The strain improved the growth and development of test crop R. communis under higher Cr(VI) concentration. Inoculation of the strain M1 alleviated Cr(VI)-induced oxidative stress in roots and leaves of R. communis by decreasing proline (up to 24 and 33%), H2O2 (up to 56 and 43%), and MDA (up to 42 and 40%) by regulating the activity of antioxidant enzymes. These findings suggest that the strain M1 promotes plant growth under Cr(VI) stress through multiple mechanisms, including phytohormone production, nutrient mobilization, stress metabolite modulation, and antioxidant defense system regulation. Thus the application of the strain M1 potentially reduces Cr(VI) bioavailability, making it a promising candidate for Cr(VI) bioremediation.

Investigation of cadmium removal using tin oxide nanoflowers through process optimization, isotherms and kinetics

The present study demonstrates a treatment approach that utilizes flower-shaped tin oxide nanoparticles for the removal of cadmium from synthetic wastewater by adsorption. Tin oxide nanoparticles were synthesized using a simple and eco-friendly method and employed for the removal of cadmium ions from wastewater. The nanoflowers were successfully characterized using Fourier Transform Infrared Spectroscopy, X-Ray Diffraction Analysis, Scanning Electron Microscope and Brunauer-Emmett-Teller (BET) surface area analysis. The batch adsorption process was optimized by response surface methods to investigate the influential parameters of the adsorption process. Optimal removal efficacy was achieved at a pH value of 9.0, a mixing time of 20 min, and an adsorbent amount of 15 mg. The results indicated that the adsorbent achieved a maximum removal efficiency of 99.14 ± 0.10% for Cd(II)ions in domestic wastewater. The adsorption equilibrium process was elucidated by Langmuir, Freundlich, Sips and Toth isotherm models using nonlinear regression. In addition, error functions such as Chi-square (X2, Average Relative Error (ARE), Root Mean Squared Error (RMSE) and HYBRID were used to test the validity of the nonlinear models. The results indicated that the Sips model, with an R2 value of 0.9894, accurately matched the experimental data and adsorption capacity of 57.12 mg g- 1 for Cd(II) was calculated respectively. The sorption kinetics were well characterized by a pseudo-second-order kinetic model. The results demonstrated that adsorption of cadmium onto the surface of SnO2 nanoparticles is influenced by both monolayer adsorption and multi-site interactions. These findings indicate that SnO2 nanoparticles are suitable for removing cadmium from aqueous solutions in batch processes.

Biofilm Formation and Detoxification of Hexavalent Chromium by Bacillus subtilis: A Sustainable Approach to Bioremediation

Hexavalent chromium [Cr(VI)] is a toxic environmental pollutant, primarily generated by industrial processes, posing a significant risk to biota. Effective detoxification of Cr(VI) is necessary before environmental discharge. This study focused on the Cr(VI) tolerance and detoxification potential of an isolated Bacillus subtilis strain KCBA07C10, along with the effects of Cr(VI) stress on its biofilm formation, and its potential application in bioremediation. The bacterial strain isolated from treated textile effluent, was subjected to growth studies in Cr(VI)-supplemented media with a low carbon source. Detoxification potential was assessed through Cr(VI) and total Cr removal analyses, while biofilm formation was evaluated using spectrophotometric assays and scanning electron microscopy. Results revealed that B. subtilis KCBA07C10 tolerates high Cr(VI) concentrations (> 16.0 mg/L) and achieves significant detoxification via bioreduction, removing nearly 88% of Cr(VI) even under nutrient-limited conditions. These findings highlight the strain's potential for bioremediation. Furthermore, quantitative assays demonstrated a positive correlation between Cr(VI) exposure and biofilm formation (p = 0.009, α = 0.05), suggesting an adaptive defense mechanism. This study highlights the potential of B. subtilis KCBA07C10 as an eco-friendly agent for Cr(VI) detoxification and bioremediation applications.

Eco-Friendly Synthesis of Zirconia Nanoparticles Using Sonchus asper Extract: A Sustainable Approach to Enhancing Chinese Cabbage Growth and Remediating Chromium-Contaminated Soil

Chromium (Cr) contamination poses severe risks to plant health and soil quality, requiring sustainable remediation methods. This study explored the synthesis of zirconia nanoparticles (PF-ZrO2 NPs) from Sonchus asper extract and assessed their potential to alleviate Cr toxicity in Chinese cabbage (Brassica rapa var. pekinensis). The characterization of nanoparticles was performed through XRD, SEM, and FTIR analyses, confirming their crystalline nature, structure, and surface chemistry. The results indicated significant declines in plant growth, chlorophyll content, biomass, and nutrient uptake under Cr stress (treatments T2 and T4), accompanied by elevated oxidative stress indicators (H2O2, MDA) and Cr accumulation. The application of PF-ZrO2 NPs (T3 and T5) notably reduced shoot Cr concentrations (by 58.94% and 35.90%) and improved the chlorophyll level (by 5.41% and 14.41%). Additionally, nanoparticles increased antioxidant enzyme activity (SOD, POD, CAT) and improved soil properties (pH, cation exchange capacity, nutrient retention). These findings suggest green-synthesized PF-ZrO2 NPs are effective, environmentally friendly candidates for Cr remediation in contaminated soils.

Emerging trends and future outlook on chromium removal in the lab, pilot scale, and industrial wastewater system: an updated review exploring 10 years of research

Chromium (Cr) is widely recognized as a carcinogenic metal, and numerous technologies have been studied on a lab scale to manage the pollution caused by Cr contamination in wastewater. However, the removal of Cr presents several challenges and limitations in industrial wastewater management. These issues highlight the ongoing need for research to discover more efficient methods for remediating Cr from wastewater. The proposed review summarizes the current limitations, gaps, and state-of-the-art technologies on Cr removal in industrial wastewater systems over the past 10 years. It aims to lay the groundwork for future research and innovation in Cr remediation for industrial applications. The review emphasizes that conventional physicochemical techniques are often insufficient and highlights the necessity of implementing advanced integrated systems. The limitations related to industrial scaling up are also deeply investigated. Special attention is given to differentiating research conducted at laboratory, pilot, and industrial levels. The findings reveal that limited research has been conducted on an industrial scale, with most investigations focusing on treating tannery and electroplating wastewater. A few studies have also been reported on wastewater from textile, mining, steel mills, pigments, and wood processing. Despite the existence of high-performance systems demonstrated in lab-scale studies, only a handful of treatment techniques have effectively removed Cr at an industrial scale. Nevertheless, innovative breakthroughs in advanced integrated systems show promise for improved performance in the future.

Sodium citrate-modification enhanced Fe3S4 for Cr(Ⅵ) removal from aqueous solution and soil

Fe3S4 has been widely employed to remove Cr(Ⅵ) from wastewater, however, its practical effectiveness is often limited by agglomeration and passivation. This study introduces sodium citrate (SC) as a ligand to synthesize an Fe3S4-SC magnetic micro-crystal for Cr(Ⅵ) removal from aqueous solutions and contaminated soils. Experimental results show that Fe3S4-SC exhibits superior Cr(Ⅵ) removal efficiency, especially in acidic environments, with a maximum adsorption capacity of 449.12 mg/g. When Fe3S4-SC was used to remediate Cr(Ⅵ)-contaminated soil with a Cr(Ⅵ) content of 664.98 mg/kg and a TCLP-Cr(Ⅵ) concentration of 26.57 mg/L, the removal efficiencies of Cr(Ⅵ) and TCLP-Cr(Ⅵ) were 99.29% and 98.52% after 60 days. Cr speciation shifted from exchangeable fraction and weak acid-soluble fraction to more stable species bound to Fe-Mn oxides and residual fraction. Cr(Ⅵ) removal was primarily facilitated by surface Fe(Ⅱ), dissolved Fe(Ⅱ), and surface S(-Ⅱ). Surface S(-Ⅱ) provided electrons to Fe(Ⅲ), facilitating Fe(Ⅱ) regeneration for the continuous reduction of Cr(Ⅵ). The SC ligand enhanced material dispersion and stability, promoted Fe(Ⅱ) dissolution, reduced passivation layer formation, and improved electron transfer efficiency, thus increasing the efficacy of Fe3S4-SC in Cr(Ⅵ) removal. These findings provide a valuable reference for effectively remediating Cr(Ⅵ) contamination in wastewater and soil.

Mixing of Two Microbial Consortia in the Search for Stimulating Chromium Depletion

Two bacterial consortia (C55 and C33), obtained from an industrial residue contaminated with hexavalent chromium (Cr(VI)), were used to study the behavior of their mixture for depleting this ion in liquid media. In the absence of Cr(VI), C55 showed a greater growth rate than C33, while the latter exhibited biofilm formation. In the presence of this ion, C55 showed resistance up to 800 mg·L-1 and an ability to diminish up to 400 mg·L-1 of the Cr(VI) from the medium, while for C33, these concentrations were 400 and 200 mg·L-1, respectively. Bacterial synergism between these consortia was evaluated using different compound ratios (C55:C33 ratios of 1:1, 1:2, and 2:1), growing at 50, 100, and 200 mg·L-1 Cr(VI). The best half-lives of Cr(VI) decrease were 16, 31, and 98 h, respectively, for the 1:1 mixture. The ability of C33 and the mixed consortia to form biofilms was verified. MiSeq sequencing revealed 4 major populations for C55 (in a total of 14) and 3 for C33 (8), most of which were common. After an isolation process, 2 bacterial strains were obtained from C55 and 4 from C33. Three of these strains (QRePLB33E, similar to Oceanobacillus profundus; QRePLB33G, to Shouchella clausii; and QRePLB55C, to Cellulosimicrobium funkei) showed resistance to Cr(VI) and the ability to remove 100% of it at least up to 300 mg·L-1. Thus, synergism between different bacterial consortia obtained from the same site is possible and can improve, by complementing their capacities, both the growth rate and the ability to diminish the xenobiotic from the medium.

Study on the effect of active substances in molasses on the chemical reduction of Cr(VI)

Industrial molasses has garnered significant attention in the fields of food, fermentation and environmental remediation due to its abundant nutrients and antioxidant substances. Cr (VI) can be rapidly reduced by molasses in an acidic environment. In this study, the reducing activity of molasses was systematically analyzed. At pH = 2, the reduction of Cr(VI) by molasses followed a second-order kinetic model. As the molasses concentration increased from 5 g/L to 10 g/L, the reaction rate constant rose from 0.43 to 5.21 mM-1 h-1, and 56 mg/L Cr(VI) was completely eliminated in both systems. The change in polyphenol content in molasses exhibited a consistent trend with the Cr(VI) concentration. Then multiple Cr(VI) spiking experiments demonstrated that molasses contains a variety of substances with different reactivity. The rate constant for the third spike with 10 g/L molasses was 0.18 mM-1 h-1, significantly lower than that of the initial molasses concentration of 5 g/L (0.43 mM-1 h-1) under similar polyphenol levels. Moreover, the amount of polyphenols consumed to reduce the same amount of Cr(VI) varied at different spiking stages. UV-Vis, FTIR and 2DCOS revealed that the phenolic hydroxyl groups were the primary active substances involved in the reduction reaction with Cr(VI), and the molar ratio of total polyphenols to Cr(VI) ranged between 0.1 and 0.2. This study provides valuable insights into the dosage of molasses and other parameters for the effective removal of Cr(VI) pollution.

Enhancing hexavalent chromium stable reduction via sodium alginate encapsulation of newly isolated fungal and bacterial consortia

Chromium [Cr(VI)]-induced soil pollution is a serious environmental threat. Bioremediation utilizes specific microbes capable of transforming Cr(VI) into the less toxic Cr(III), however, microbial efficacy can be inhibited by elevated pollutant concentrations and competition from indigenous microbial communities. Thus, this study explored the potential of single and multi-domain microbial consortia encapsulated in alginate to overcome these shortcomings. The results revealed that (i) fungal treatments demonstrated an elevated tolerance and reduction ability for Cr(VI) compared to bacterial treatments; (ii) combined application of fungi and bacteria was more effective in degrading Cr(VI) in soil compared to the individual treatments; (iii) microbial encapsulation improved microbial response to Cr(VI) toxicity thereby increasing their lifespan and Cr(VI) degrading ability; (iv) microbial consortia significantly decreased soil pH, electrical conductivity, and redox potential while simultaneously increasing soil enzyme activities (urease, sucrase, phosphatase, catalase, and laccase); and (v) The improved tolerance in the inoculated treatment resulted in increased microbial diversity and a substantial variation in microbial community structures, with 10,753 bacterial and 2697 fungal amplicon sequence variants identified across the treatment groups. This study underscores the critical importance of microbial diversity in bioremediation, emphasizing that encapsulation with the right material could improve the effectiveness of environmental remediation strategies.

Development of a bioreactor with an integrated non-dispersive infrared CO2 sensor for rapid and sensitive detection of Cr(VI) toxicity in water

Whole-cell bioreactors equipped with external physico-chemical sensors have gained attention for real-time toxicity monitoring. However, deploying these systems in practice is challenging due to potential interference from unknown wastewater constituents with liquid-contacted sensors. In this study, a novel approach using a bioreactor integrated with a non-dispersive infrared CO₂ sensor for both toxicity detection and real-time monitoring of microbial growth phases was successfully demonstrated. Online detection of microbial-generated CO2 in gas-phase which is considered as a non-invasive method could significantly improve real-time monitoring of microbial growth phases while addressing some of the aforementioned limitations of conventional whole-cell toxicity biosensors. Pseudomonas koreensis ICTTOX1, which was isolated from wastewater and identified using MALDI-TOF mass spectrometry and 16S rRNA sequencing, was employed as the microbial source for Cr(VI) toxicity testing. Using the cells selected in the early-log phase, where its protective mechanisms have not yet fully activated, and conducting parallel toxic and blank runs contribute to the promising limit of detection, sensitivity, and reproducibility of the method. By achieving an IC₅₀ of 0.16 mg/L for Cr(VI), this method demonstrates significantly higher sensitivity compared to other reported toxicity assays. Moreover, the sensitivity of the early-log cells was maintained for 24 h of storage at 10°C. A statistically significant difference between the blank sample and 0.01 mg/L Cr(VI) solution confirms the ability of the method to detect Cr(VI) toxicity at the limited value of surface water quality in Vietnam. The largest coefficient of variation of inhibition was found to be 12 %, aligning with the recommended value for the validation of bioanalytical methods according to USFDA. These findings support the development of an eco-friendly and sensitive method for rapid detection of Cr(VI) toxicity, enabling early warning of pollution events to enhance environmental safety. However, the study is limited by the absence of chromium speciation analysis during microbial metabolism, which should be explored in future research.

Back to chromite as a mineralogical strategy for long-term chromium pollution control

Re-oxidation of Cr(III) in treated Cr-contaminated sites poses a considerable source of Cr(VI) pollution, necessitating stable treatment solutions for long-term control. This study explores the immobilization of Cr(VI) into chromite, the most stable and weathering-resistant Cr-bearing mineral, under ambient conditions. Batch experiments demonstrate chromite formation at pH above 7 and Fe(III)/Cr(III) ratios exceeding 1, with Fe(III) occupying all tetrahedral sites, essential for stability. A theoretical model is developed to evaluate the effects of pH and Fe(III)/Cr(III) ratios on chromite crystallinity, resulting in AI4Min-Cr, a publicly accessible platform offering real-time intelligent remediation strategies. To tackle the complexities of non-point source Cr pollution, we employ microbial methods to regulate on-site Eh and pH, optimizing chromite precipitation. Long-term stability tests confirm that chromite remained stable for over 180 days, with potential for magnetic separation recovery. This study presents a mineralogical strategy to address re-oxidation and Cr resource recovery in Cr-contaminated water and soil.

Iron(II/III) Alters the Relative Roles of the Microbial Byproduct and Humic Acid during Chromium(VI) Reduction and Fixation by Soil-Dissolved Organic Matter

Though reduction of hexavalent chromium (Cr(VI)) to Cr(III) by dissolved organic matter (DOM) is critical for the remediation of polluted soils, the effects of DOM chemodiversity and underlying mechanisms are not fully elucidated yet. Here, Cr(VI) reduction and immobilization mediated by microbial byproduct (MBP)- and humic acid (HA)-like components in (hot) water-soluble organic matter (WSOM), (H)WSOM, from four soil samples in tropical and subtropical regions of China were investigated. It demonstrates that Cr(VI) reduction capacity decreases in the order WSOM > HWSOM and MBP-enriched DOM > HA-enriched DOM due to the higher contents of low molecular weight saturated compounds and CHO molecules in the former. The presence of Fe(II/III) selectively coprecipitates with high molecular weight components (e.g., tannins, lignin, and CHON-rich compounds) to form ferrihydrite and greatly inhibits Cr(VI) transformation and fixation in MBP-enriched DOM but enhances that in HA-enriched DOM. This is probably owing to the combined effects of (1) the increase of DOM electron-donating capacity and Fe(II) generation during the reactions of HA with Fe(II) and Fe(III), respectively; (2) the enrichment of phenolic and carboxyl groups, aromatic compounds, and carbon defects on ferrihydrite surfaces; and (3) the acceleration of HA decomposition and MBP mineralization by hydroxyl radicals. These findings enhance our understanding of the chemodiversity of soil DOM, the complex interactions between Cr(VI), DOM, and Fe(II/III), and can help design remediation strategies for contaminated environments.

Effect of straw decomposition on hexavalent chromium removal by straw: Significant roles of surface potential and dissolved organic matter

Mobility and bioavailability of hexavalent chromium (Cr(VI)) in agricultural soils are affected by interactions between Cr(VI) and returned crop straws. However, the effect of straw decomposition on Cr(VI) removal and underlying mechanisms remain unclear. In this study, Cr(VI) removal by pristine and decomposed rice/rape straws was investigated by batch experiments and a series of spectroscopies. The results showed that straw decomposition inhibited Cr(VI) removal, regardless of straw types. However, the potential mechanisms of the inhibition were distinct for the two straws. For the rice straw, a lower zeta potential after decomposition suppressed Cr(VI) sorption and subsequent reduction. In addition, less Cr(VI) was reduced by the decomposed rice straw-derived dissolved organic matter (DOM) than the pristine one. In contrast, for the rape straw, due to the increased zeta potential after decomposition, the decreased Cr(VI) removal was mainly ascribed to less Cr(VI) reduction by the rape straw-derived DOM. These results emphasized the significant roles of straw surface potential and DOM in Cr(VI) removal, depending on straw types and decomposition, which facilitate the fundamental understanding of Cr(VI) removal by straws and are helpful for predicting the environmental risk of Cr and rational straw return in Cr(VI)-contaminated fields.

Synergistic transformation of Cr(VI) in lubricant degradation by bacterial consortium

In recent years, it has become widely acknowledged that heavy metals are often present in oil-contaminated sites. This study utilized three specific types of microorganisms with different functions to construct a composite bacterial consortium for treating lubricant-Cr(VI) composite pollutants. The selected strains were Lysinbacillus fusiformis and Bacillus tropicus. The Back Propagation Neural Network-genetic algorithm was employed to optimize the secondary bacterial addition time to 67 h and the strain ratio to 2:1. The optimized process involved the use of 4.6 g/L glucose and ammonium oxalate as electron donors. After 6 days of treatment with the composite consortium, the removal rates of 1500 mg/L lubricating oil and 50 mg/L chromium reached 90.3% and 84.2%, respectively. Initial analysis using three-dimensional fluorescence to examine the changes in extracellular polymers in the bacteria when exposed to chromium-lubricating oil, showed that 30 mg/L Cr(VI) could induce the secretion of extracellular protein-like substances. These substances may be directly or indirectly involved in the biological detoxification mechanism of chromium. The synergistic removal of complex pollutants has the potential to transform previous "unilateral" removal studies and enhance bioremediation efficiency.

Isolation of Aerobic Heterotrophic Bacteria from a Microbial Mat with the Ability to Grow on and Remove Hexavalent Chromium through Biosorption and Bioreduction

Water pollution with toxic hexavalent chromium, Cr(VI), is an environmental threat that has a direct impact on living organisms. The use of microorganisms from microbial mats to remove Cr(VI) has scarcely been investigated. Here, we isolated aerobic heterotrophic bacteria from a Cr-polluted microbial mat found in a mining site in Oman, and investigated their ability to remove Cr(VI), and the underlying mechanism(s) of removal. All isolates fell phylogenetically into the genera Enterobacter, Bacillus, and Cupriavidus, and could completely remove 1 mg L-1 Cr(VI) in 6 days. The strains could tolerate up to 2000 mg L-1 Cr(VI), and exhibited the highest Cr(VI) removal rate at 100 ± 9 mg L-1 d-1. Using scanning electron microscopy (SEM) coupled with elemental analysis, the strains were shown to adsorb Cr(VI) at their cell surfaces. The functional groups OH, NH2, Alkyl, Metal-O, and Cr(VI)-O were involved in the biosorption process. In addition, the strains were shown to reduce Cr(VI) to Cr(III) with the involvement of chromate reductase enzyme. We conclude that the aerobic heterotrophic bacteria isolated from Cr-polluted microbial mats use biosorption and bioreduction processes to remove Cr(VI) from wastewater.

3D-Printed Fluorescent Hydrogel Consisting of Conjugated Polymer and Biomacromolecule for Fast and Sensitive Detection of Cr(VI) in Vegetables

Portable fluorescent film sensors offer a solution to the contamination issue in homogeneous sensor detection systems. However, their special structure leads to low sensitivity and a long response time, resulting in a significant scientific challenge limiting their development and application. In this work, we propose a dual design strategy to prepare highly sensitive film sensors for rapidly detecting Cr2O72-. Specifically, P(Fmoc-Osu)-SA hydrogel films were developed by integrating the biological macromolecule sodium alginate (SA) with the conjugated polymer poly(N-(9-Fluorenylmethoxycarbonyloxy)succinimide) (P(Fmoc-Osu)), using both mold and inkjet 3D printing methods. The "molecular wire effect" of the sensing unit P(Fmoc-Osu) and the water channel within the film substrate are responsible for the improved sensitivity and the reduced response time of this thin film sensor. P(Fmoc-Osu)-SA hydrogel films prepared by these two methods can rapidly detect Cr2O72- with limits of detection of 1.18 and 0.078 nM, respectively. Considering that 3D-printed hydrogel films can be tailored to different shapes according to detection needs, the P(Fmoc-Osu)-SA hydrogel films produced from this method were effectively applied in vegetable samples. This study provides an innovative and effective strategy for the development of biocompatible hydrogel sensors that offer the potential for determining trace amounts of Cr2O72- in agriculture.

Myco-remediation of chromium heavy metal from industrial wastewater: A review

Chromium a heavy metal present in the effluent of the industries causes accumulation of toxicity in water. Chromium commonly has Cr (III) and Cr (VI), two oxidation states, in which hexavalent form causes more health issues to human, other species and environment. The increased anthropogenic effects, especially tannery industrial effluent contributes the higher percentage of chromium accumulation. Removal of heavy metal can be attributed to many aspects, conventionally the physio-chemical methods which superseded by biological means of remediation. Chromium resistant microbes can be used to remove metal ions of chromium from the effluent, as this can be considered an eco-friendly approach. The microbial accession of nanoparticles synthesis is being focused, due to its accuracy and specificity in results. Mycoremediation grabbed attention as fungal absorbance efficiency and the surface-mechanism of heavy metal ions correlates each other. Current study in-depth indulges the base to core mechanism of mycoremediation of chromium ions from different effluents. Fungal-assisted mechanism of chromium ions have insists to be fewer, which may gain attention by enhancing the methodology of removal of chromium ions. This study focuses on improvement of fungal strain and pave-way, to improvise the study with immobilization technique which renders usage of the adsorbents redundant usage and applications, substantially with the low-cost polymeric material alginate is given more importance for immobilization technique. Alginate apart from low-cost adsorbent, is an excellent support for fungal producing nanoparticles which would provide wide-cast and an extraordinary adsorbent material.

Unveiling the chromate stress response in the marine bacterium Bacillus enclensis AGM_Cr8: a multifaceted investigation

In this study, we introduce Bacillus enclensis AGM_Cr8, a gram-positive marine bacterium isolated from the chronically polluted Versova Creek in Mumbai, India. AGM_Cr8 exhibits robust tolerance to chromate stress, thriving in marine agar media containing up to 3200 mg/l of hexavalent chromium [Cr(VI)], with the Minimum Inhibitory Concentration (MIC) established at 5000 mg/l. Notably, AGM_Cr8 also displays tolerance to other heavy metals, including Lead [Pb (II)] (1200 mg/l), Arsenic [As (III)] (400 mg/l), Cadmium [Cd(II)] (100 mg/l), and Nickel [Ni(II)] (100 mg/l). Scanning Electron Microscopy (SEM) reveals the presence of Cr(VI) on the bacterial surface, accompanied by the secretion of extracellular polymeric substances (EPSs) facilitating Cr(VI) sequestration. This observation is validated through Energy Dispersive Spectroscopy (EDS). Transmission Electron Microscopy (TEM) and Scanning Transmission Electron Microscopy-Energy Dispersive Spectroscopy (STEM-EDS) confirm internal bioaccumulation of Cr(VI). X-ray photoelectron spectroscopy (XPS) identifies distinct peaks around 579 and 576 eV, indicating the coexistence of Cr(VI) and Cr(III), implying a bioreduction mechanism. De novo genome sequencing identifies twenty-two chromate-responsive genes, including putative chromate transporters (srpC1 and srpC2), suggesting an efflux mechanism. Other identified genes encode NAD(P)H-dependent FMN-containing oxidoreductase, NADH quinone reductase, ornithine aminotransferase, transporter genes (natA, natB, ytrB), and genes related to DNA replication and repair (recF), DNA mismatch repair (mutH), and superoxide dismutase. We therefore, propose a chromate detoxification pathway that involves an interplay of chromate transporters, enzymatic reduction of Cr(VI) to Cr(III), DNA repair and role of antioxidants in response to chromate stress. We have highlighted the potential of AGM_Cr8 for bioremediation in chromium-contaminated environments, given its robust tolerance and elucidated molecular mechanisms for detoxification.

Mechanisms of Chromium Removal from Water and Soil Using Bioleached Nano Zero-Valent Iron-Mediated Biochar via Co-Pyrolysis

Biological charcoal loaded with nano zero-valent iron (nZVI@BC) was synthesized using the bioleaching co-pyrolysis method. This study analyzed the formulation sequence of nZVI@BC and its influence on chromium elimination from water and soil, along with the involved mechanisms. The bioleaching method facilitated ionic iron incorporation onto biochar in the form of yellow potassium ferroalum compounds, which were reduced to Fe0 by H2, CO, and CH4 generated during biomass co-pyrolysis. In aqueous conditions, the removal capacity of Cr(VI) by nZVI@BC increased by 72.01% and 66.92% compared to biochar (BC) and biochar-bioleachate composite (BBC), respectively. Under optimal conditions, nZVI@BC eliminated 90.11% of 20 mg/L Cr(VI), with experimental data fitting the Freundlich and pseudo-second-order kinetic models. The nZVI@BC also showed a passivation effect on chromium in soil; after 45 days, the exchangeable state of chromium was reduced by 12.89%, while the residual state increased by 10.45%. This enhancement in chromium elimination from soil was evident, as the residual state increased more for nZVI@BC (10.45%) than for BC alone (9.67% and 8.48%). Soil physicochemical properties and microbial community abundance improved as well. Cr(VI) removal mechanisms involved adsorption, reduction, and co-precipitation in water, while soil mechanisms included surface adsorption, electrostatic attraction, ion exchange, and complexation. The synthesis of nZVI@BC offers a novel method for creating iron-modified materials to effectively remove Cr(VI).

Nucleic acid-functionalized upconversion luminescence biosensor based on strand displacement-mediated signal amplification for the detection of trivalent chromium ions

BACKGROUND

Rapid industrial development has generated serious pollution, including the presence of toxic and harmful heavy metal ions. Among them, trivalent chromium ion (Cr3+) is a very important element that poses a threat to life and health in our industrial wastewater pollution. Thus, it is important to develop efficient fluorescence methods for Cr3+ detection. In this study, an upconversion luminescence biosensor for detecting Cr3+ was constructed based on a DNAzyme, strand displacement reaction (SDR), and DNA-functionalized upconversion nanoparticles (UCNPs).

RESULTS

The sulfonate-rich poly (sodium 4-styrene sulfonate) (PSS) was modified onto the surface of UCNPs, forming UCNPs@PSS. Then, NH2-Capture probe DNA (NH2-Cp) was further modified onto the UCNPs@PSS surface through sulfonylation, resulting in UCNPs@PSS@NH2-Cp. The DNAzyme activated by Cr3+ triggered the release of the primer probe (Pp), which initiated the SDR system cycle, thereby releasing a tetramethylrhodamine (TAMRA)-modified signal probe (TAMRA-Sp). Finally, UCNPs@PSS@NH2-Cp bound to TAMRA-Sp through complementary base pairing, causing UCNPs and TAMRA to approach each other. Because of the luminescence resonance energy transfer (LRET) mechanism, the upconversion luminescence (UCL) signal of the UCNPs was quenched by TAMRA, enabling the detection of Cr3+ by the change of I585/I545 ratio. This biosensor has good stability, selectivity, and sensitivity, with a linear range of 0.5-75 nM and a detection limit of 0.135 nM for Cr3+.

SIGNIFICANCE AND NOVELTY

Firstly, based on LRET between UCNPs and TAMRA, the quantitative analysis of Cr3+ is achieved through the changes of ratio fluorescence. Secondly, the specificity of the biosensor is improved by utilizing the specific recognition of DNA enzymes. Thirdly, the signal amplification technology of the SDR cycle greatly improves the sensitivity of biosensor. This biosensor will be useful for future environmental safety monitoring and biopsy of biological fluids.

Advances in mechanism for the microbial transformation of heavy metals: implications for bioremediation strategies

Heavy metals are extensively discharged through various anthropogenic activities, resulting in an environmental risk on a global scale. In this case, microorganisms can survive in an extreme heavy metal-contaminated environment via detoxification or resistance, playing a pivotal role in the speciation, bioavailability, and mobility of heavy metals. Therefore, studies on the mechanism for the microbial transformation of heavy metals are of great importance and can provide guidance for heavy metal bioremediation. Current research studies on the microbial transformation of heavy metals mainly focus on the single oxidation, reduction and methylation pathways. However, complex microbial transformation processes and corresponding bioremediation strategies have never been clarified, which may involve the inherent physicochemical properties of heavy metals. To uncover the underlying mechanism, we reclassified heavy metals into three categories based on their biological transformation pathways, namely, metals that can be chelated, reduced or oxidized, and methylated. Firstly, we comprehensively characterized the difference in transmembrane pathways between heavy metal cations and anions. Further, biotransformation based on chelation by low-molecular-weight organic complexes is thoroughly discussed. Moreover, the progress and knowledge gaps in the microbial redox and (de)methylation mechanisms are discussed to establish a connection linking theoretical advancements with solutions to the heavy metal contamination problem. Finally, several efficient bioremediation strategies for heavy metals and the limitations of bioremediation are proposed. This review presents a solid contribution to the design of efficient microbial remediation strategies applied in the real environment.

Novel mechanistic insights into Cr(VI) and Cr(III) induced discrepancies of cellular toxicity and oxidative injury events in Eisenia fetida

Chromium (Cr) poses a high ecological risk, however the toxic mechanisms of Cr in different valence states to soil organisms at cellular and molecular levels are not exactly. In this study, the Eisenia fetida coelomocytes and Cu/Zn-superoxide dismutase (Cu/Zn-SOD) were chosen as the target subjects to investigate the effects and mechanisms of cellular toxicity induced by Cr(VI) and Cr(III). Results indicated that Cr(VI) and Cr(III) significantly reduced the coelomocytes viability. The level of reactive oxygen species (ROS) was markedly increased after Cr(VI) exposure, which finally reduced antioxidant defense abilities, and induced lipid peroxidation and cellular membrane damage in earthworm coelomocytes. However, Cr(III) induced lower levels of oxidative stress and cellular damage with respect to Cr(VI). From a molecular perspective, the binding of both Cr(VI) and Cr(III) with Cu/Zn-SOD resulted in protein backbone loosening and reduced β-Sheet content. The Cu/Zn-SOD showed fluorescence enhancement with Cr(III), whereas Cr(VI) had no obvious effect. The activity of Cu/Zn-SOD continued to decrease with the exposure of Cr. Molecular docking indicated that Cr(III) interacted more readily with the active center of Cu/Zn-SOD. Our results illustrate that oxidative stress induced by Cr(VI) and Cr(III) plays an important role in the cytotoxic differences of Eisenia fetida coelomocytes and the binding of Cr with Cu/Zn-SOD can also affect the normal structures and functions of antioxidant defense-associated protein.

Genomic and proteomic analyses reveal the reduction mechanism of hexavalent chromium by the culturing supernatant of strain Pediococcus acidilactici 13-7

This study used lactic acid bacteria with high antioxidative properties to screen for strains capable of reducing hexavalent chromium [Cr (VI)] in their culturing supernatants. The strain Pediococcus acidilactici 13-7 exhibited potent Cr (VI)-reducing capability and remarkable resistance to Cr (VI) even at concentration as high as 24 mM. Comparative genomics analysis revealed a unique gene, ChrR, associated with Cr (VI) reduction in this strain, distinguishing it from four reference strains of P. acidilactici. The proteomic investigation identified proteins linked to the ChrR gene, such as nqo1, frdA, and gshR, indicating significant enrichment in redox-related functions and oxidative phosphorylation pathways. These findings suggest that P. acidilactici 13-7 possesses superior electron transfer capacity compared to other strains, making it more adaptable under highly oxidative conditions by modulating the external environment to mitigate oxidative stress. Collectively, the results demonstrated the potential application of this lactic acid bacterial strain for bioremediation of heavy metals by its ability to reduce Cr (VI), and shed light on the molecular mechanisms underlying Cr (VI) reduction of the strain P. acidilactici 13-7.

Remediation of Cr(VI)-contaminated soil by CS/PPy coupling with Microbacterium sp. YL3

In this research, a new material, chitosan/polypyrrole (CS/PPy), was synthesized and linked with the Cr(VI)-reducing bacterial strain YL3 to treat Cr(VI)-polluted soil. The findings demonstrated that the synergistic application of strain YL3 and CS/PPy achieved the greatest reduction (99.6 %). During the remediation process, CS/PPy served as a mass-storage and sustained release agent in the soil, which initially decreased the toxic effects of high concentrations of Cr(VI) on strain YL3, thereby enhancing the Cr(VI) reduction efficiency of strain YL3. These combined effects significantly mitigated Cr(VI) stress in the soil and restored enzyme activities. Furthermore, wheat growth in the treated soil also significantly improved. High-throughput sequencing of the microorganisms in the treated soil revealed that CS/PPy was not only effective at removing Cr(VI) but also at preserving the original microbial diversity of the soil. This suggests that the combined treatment using strain YL3 and CS/PPy could rehabilitate Cr(VI)-contaminated soil, positioning CS/PPy as a promising composite material for future bioremediation efforts in Cr(VI)-contaminated soils.

Ferric citrate enhanced bioreduction of Cr(VI) by Bacillus cereus RCr in aqueous solutions: reduction performance and mechanisms

The bioreduction characteristics and mechanisms of Cr(VI) onto Bacillus cereus RCr enhanced by ferric citrate were investigated. The optimum conditions were initial pH 9, temperature 40 °C, inoculation amount 4%, and glucose 3 g/L, respectively. The addition of 1.5 g/L ferric citrate increased the average reduction rate from 120.43 to 220.61 mg/(L∙h) compared with the control (without ferric citrate). The binding capacity of Cr(III) on the cell surface increased to 21%, in which the precipitates were mainly CrO(OH), Cr2O3, and FeCr2O4. Cell membrane was the main site of reduction, related important functional groups: - COOH, C-H, - NH2, C = C, and P-O. Fe(III) increased the yield of NADH and cytochrome c by approximately 48.51% and 68.63%, which significantly facilitated the electron generation and electron transfer, thus increasing the amount of electrons in the bioreduction of heavy metals by an average of 110%. Among the electrons obtained by Cr(VI), the proportion of indirect reduction mediated by Fe(III)/Fe(II) shuttle was 62% on average, whereas direct reduction mediated by reductase was 38%. These results may provide insights into the bioreduction process by bacteria enhanced by Fe(III) for detoxification of heavy metals with multiple valences, as an important step towards improving microbial remediation.

Inhibitory mechanism of Cr(VI) on sulfur-based denitrification: Bio-toxicity, bio-electron characteristics, and microbial evolution

Sulfur-based denitrification is a promising technology for efficient nitrogen removal in low-carbon wastewater, while it is easily affected by toxic substances. This study revealed the inhibitory mechanism of Cr(VI) on thiosulfate-based denitrification, including bio-toxicity and bio-electron characteristics response. The activity of nitrite reductase (NIR) was more sensitive to Cr(VI) than that of nitrate reductase (NAR), and NIR was inhibited by 21.32 % and 19.86 % under 5 and 10 mg/L Cr(VI), resulting in 10.12 and 15.62 mg/L of NO2--N accumulation. The biofilm intercepted 36.57 % of chromium extracellularly by increasing 25.78 % of extracellular polymeric substances, thereby protecting microbes from bio-toxicity under 5 mg/L Cr(VI). However, it was unable to resist 20-30 mg/L of Cr(VI) bio-toxicity as 19.95 and 14.29 mg Cr/(g volatile suspended solids) invaded intracellularly, inducing the accumulation of reactive oxygen species by 165.98 % and 169.12 %, which triggered microbial oxidative-stress and damaged the cells. In terms of electron transfer, S2O32- oxidation was inhibited, and parts of electrons were redirected intracellularly to maintain microbial activity, resulting in insufficient electron donors. Meanwhile, the contents of flavin adenine dinucleotide and cytochrome c decreased under 5-30 mg/L Cr(VI), reducing the electron acquisition rate of denitrification. Thermomonas (the dominant genus) possessed denitrification and Cr(VI) resistance abilities, playing an important role in antioxidant stress and biofilm formation. ENVIRONMENTAL IMPLICATION: Sulfur-based denitrification (SBD) is a promising method for nitrate removal in low-carbon wastewater, while toxic heavy metals such as Cr(VI) negatively impair denitrification. This study elucidated Cr(VI) inhibitory mechanisms on SBD, including bio-toxicity response, bio-electron characteristics, and microbial community structure. Higher concentrations Cr(VI) led to intracellular invasion and oxidative stress, evidenced by ROS accumulation. Moreover, Cr(VI) disrupted electron flow by inhibiting thiosulfate oxidation and affecting electron acquisition by denitrifying enzymes. This study provided valuable insights into Cr(VI) toxicity, which is of great significance for improving wastewater treatment technologies and maintaining efficient and stable operation of SBD in the face of complex environmental challenges.

The dominant role of extracellular polymeric substances produced by Achromobacter xylosoxidans BP1 in Cr(VI) microbial reduction

Extracellular polymeric substances (EPS) have demonstrated significant benefits for reducing multivalent metal contamination. Using Achromobacter xylosoxidans BP1 isolated from a coal chemical site in China, this study elucidated the contribution of EPS production to Cr (VI) reduction and revealed its biological removal mechanism. BP1 grew at an optimum pH of 8 and the lowest inhibitory concentration of Cr(VI) was 300 mg/L. The spent medium completely removed Cr(VI), whereas resting cells were only able to remove 10.47 % and inactivated cells were nearly incapable of Cr(VI) removal. S-EPS and B-EPS reduced Cr(VI) by 98.59 % and 11.64 %, respectively. SEM-EDS analysis showed that the BP1 cells were stimulated to produce EPS under Cr stress. The XPS results showed that 29.63 % of Cr(VI) was enriched by intracellular bioaccumulation or biosorption and 70.37 % of Cr(VI) was reduced by extracellular enzymes to produce Cr(OH)3 and organic Cr(III) complexes. According to FTIR, EPS with -OH, COO-, and amide groups supplied binding sites and electrons for the reductive adsorption of Cr(VI). Genomic studies showed that BP1 primarily produces extracellular polysaccharides, metabolises sulphur and nitrogen, and reduces reactive oxygen species damage as a result of DNA repair proteases.

Biosorption of chromium by live and dead cells of Bacillus nitratireducens isolated from textile effluent

Bacillus nitratireducens was isolated from textile effluent and showed high tolerance to chromium (Cr), reaching up to a 1000 mg/L MIC value. This research was aimed at utilizing biosorbents from live and dead cells of B. nitratireducens to remove Cr from an aqueous solution. A batch biosorption test was performed, and mechanisms analysis was approached by an adsorption-desorption test, SEM-EDS, and FTIR analysis. Cr removal by dead cells in 25, 50, and 100 mg/L of Cr were 58.99 ± 0.7%, 69.8 ± 0.2%, and 82.87 ± 0.11%, respectively, while that by live cells was 73.08 ± 1.9%, 80.27 ± 6.33%, and 86.17 ± 1.93%, respectively. Live cells showed significantly higher Cr removal and adsorption capacities as compared to dead cells. In all concentrations, absorption contributed more than adsorption to the Cr removal by both live and dead cells. Absorption of Cr was subjected to occur due to passive mechanisms in dead cells while involving some active mechanisms in live cells. SEM-EDS confirmed the detection of Cr on the cell surface, while FTIR revealed the shifting of some peaks after the biosorption test, suggesting interactions between Cr and functional groups. Further TEM analysis is suggested to be conducted as a future approach to reveal the inner structure of cells and confirm the involvement of absorption mechanisms.

Sustainable Lignin-Reinforced Chitosan Membranes for Efficient Cr(VI) Water Remediation

The pollution of aquatic environments is a growing problem linked to population growth and intense anthropogenic activities. Because of their potential impact on human health and the environment, special attention is paid to contaminants of emerging concern, namely heavy metals. Thus, this work proposes the use of naturally derived materials capable of adsorbing chromium (VI) (Cr(VI)), a contaminant known for its potential toxicity and carcinogenic effects, providing a sustainable alternative for water remediation. For this purpose, membranes based on chitosan (CS) and chitosan/Kraft lignin (CS/KL) with different percentages of lignin (0.01 and 0.05 g) were developed using the solvent casting technique. The introduction of lignin imparts mechanical strength and reduces swelling in pristine chitosan. The CS and CS/0.01 KL membranes performed excellently, removing Cr(VI) at an initial 5 mg/L concentration. After 5 h of contact time, they showed about 100% removal. The adsorption process was analyzed using the pseudo-first-order model, and the interaction between the polymer matrix and the contaminant was attributed to electrostatic interactions. Therefore, CS and CS/KL membranes could be low-cost and efficient adsorbents for heavy metals in wastewater treatment applications.

Chromiomics: Chromium detoxification and approaches for engineering tolerance in plants

Chromium (Cr) is a heavy metal that poses a grave threat to the ecosystem including plants. Chromium is very harmful to plants due to its effects on many physiological and metabolic pathways culminating in a negative impact on plant's growth, development, and ability to take up nutrients. Plants have developed physiological, biochemical, and molecular ways of defense against Cr, such as by augmenting antioxidant potential to reduce reactive oxygen species (ROS). A number of genes have been discovered to play a significant role in the defense mechanisms of plants against Cr, for example, genes associated with the activation of phytochelatins, metallothioneins, and those of enzymes like glutathione-S-transferases. Along with this, a few miRNAs have been found to be associated in alleviating Cr stress and, to augment plant tolerance by controlling transcription factors, HSPs, and the expression of a few proteins and hormones. Defense pathway genes and miRNAs have been used for the generation of transgenic phytoremediator plants. Not only do the transgenic plants have a higher tolerance to Cr, but they also act as hyperaccumulators for Cr and have the potential to remediate other heavy metals. This article describes about environmental Cr contamination, Cr effects on plants, different genes and miRNAs involved in Cr stress mitigation and use of candidate genes, microRNAs for creating transgenic plant systems for phytoremediation, and the applications of CRISPR technology. It is expected that the integration of omics approach and advanced genomics will offer scope for more effective phytoremediation of Chromium in the coming years.

The association between the urinary chromium and blood pressure: a population-based study

BACKGROUND AND AIM

The impact of trace elements and heavy metals on human health has attracted widespread attention. However, the correlation between urinary chromium concentrations and blood pressure remains unclear and inadequately reported, and the aim of this study was to investigate the relationship between urinary chromium concentrations and blood pressure in adults in the United States (US).

METHODS

We utilized data from the National Health and Nutrition Examination Survey (NHANES) 2017-2018 for this study. Multivariate logistic regression and multivariate linear regression were used to explore the association of urinary chromium concentrations with hypertension and blood pressure. Additionally, we also performed subgroup analysis and restricted cubic splines (RCS).

RESULTS

A total of 2958 participants were enrolled in this study. The overall mean systolic blood pressure and diastolic blood pressure were 123.98 ± 0.60, 72.66 ± 0.57 mmHg, respectively. The prevalence of hypertension was found in 41.31% of the whole participants. In the fully adjusted model, we did not observe a correlation between urinary chromium concentrations and the risk of hypertension and systolic blood pressure. However, we found a negative association between urinary chromium concentrations and diastolic blood pressure. In subgroup analysis, we observed a positive association between urinary chromium and the risk of hypertension among participants older than 60 years of age and those who were Non-Hispanic Black. The interaction term highlighted the influence of age and race on this positive association. We also found a negative association of urinary chromium with diastolic blood pressure in male, participants who were current smokers, overweight, and other races, as well as those without alcohol use and anti-hypertensive drug use. However, the interaction term only revealed the influence of alcohol consumption on the negative association.

CONCLUSION

Our study suggested that urinary chromium concentrations may show a negative association with diastolic blood pressure and this association was significantly dependent on alcohol consumption. Besides, a positive association between urinary chromium and the risk of hypertension was also found among participants older than 60 years of age and those who were Non-Hispanic Black.

Costus speciosus (Koen ex. Retz.) Sm.: a suitable plant species for remediation of crude oil and mercury-contaminated soil

The aim of this study was to evaluate the efficiency of Costus speciosus (Koen ex. Retz.) Sm. in the degradation of crude oil and reduction of mercury (Hg) from the contaminated soil in pot experiments in the net house for 180 days. C. speciosus was transplanted in soil containing 19150 mg kg-1 crude oil and 3.2 mg kg-1 Hg. The study includes the evaluation of plant biomass, height, root length, total petroleum hydrocarbon (TPH) degradation, and Hg reduction in soil, TPH, and Hg accumulation in plants grown in fertilized and unfertilized pots, chlorophyll production, and rhizospheric most probable number (MPN) at 60-day interval. The average biomass production and heights of C. speciosus in contaminated treatments were significantly (p < 0.05) lower compared to the unvegetated control. Plants grown in contaminated soil showed relatively reduced root surface area compared to the uncontaminated treatments. TPH degradation in planted fertilized, unplanted, and planted unfertilized pot was 63%, 0.8%, and 38%, respectively. However, compared to unvegetated treatments, TPH degradation was significantly higher (p < 0.05) in vegetated treatments. A comparison of fertilized and unfertilized soils showed that TPH accumulation in plant roots and shoots was relatively higher in fertilized soils. Hg degradation in soil was significantly (p < 0.05) more in planted treatment compared to unplanted treatments. The fertilized soil showed relatively more Hg degradation in soil and its accumulation in roots and shoots of plants in comparison to unfertilized soil. MPN in treatments with plants was significantly greater (p < 0.05) than without plants. The plant's ability to produce biomass, chlorophyll, break down crude oil, reduce Hg levels in soil, and accumulate TPH and Hg in roots and shoots of the plant all point to the possibility of using this plant to remove TPH and Hg from soil.

Do chromium-resistant bacterial symbionts of hyperaccumulator Callitriche cophocarpa support their host in phytobial remediation of water?

Callitriche cophocarpa Sendtn. is a macrophyte widely distributed in aquatic systems of the temperate climate zone and a known hyperaccumulator of chromium. Ten pure symbiotic bacterial isolates of C. cophocarpa were obtained and identified. Three of the isolates showed the highest resistance to Cr(VI): Microbacterium sp. (Ct1), Aeromonas sp. (Ct3) and Acinetobacter sp. (Ct6). Acinetobacter sp. (Ct6) was able to survive up to a concentration of 104 mg/L (2 mM). The isolates were also able to effectively detoxify Cr(VI) by reducing it to Cr(III). We tested whether inoculation of plants with a consortium consisting of Ct1, Ct3 and Ct6 affects: (1) the phytoextraction of chromium from leachates, (2) the physiological state of plants after Cr(VI) treatment. The solutions were landfill leachates and contained 10.7 mg/L of Cr(VI) - an amount 530 times exceeding the legal limits. We influenced the plants with Cr in two steps, each lasting for 10 days, first using mature shoots and then apical ones. The highest Cr content concomitant with the highest bioconcentration factor (BCF) were found in the inoculated plants: 1274 and 119 mg/kg dry mass (d.m.), respectively. The physiological status of the plants was assessed by biometric tests and advanced chlorophyll fluorescence analyses. The photosynthetic activity of mature shoots was influenced by Cr(VI) more negatively than that of young apical shoots. The inoculation with the bacterial consortium significantly reduced the negative effect of Cr(VI) on mature organs. In some cases the inoculated mature plants exhibited photosynthetic activity that was even higher than in the control plants. The results unequivocally show a beneficial effect of C. cophocarpa inoculation with the tested isolates resulting in a significant improvement of the phytoremediation properties of this aquatic chromium hyperaccumulator.

Current strategies on bioremediation of personal care products and detergents: Sustainability and life cycle assessment

The increased use of personal care products and detergents in modern society has raised concerns about their potential adverse effects on the environment. These products contain various chemical compounds that can persist in water bodies, leading to water pollution and ecological disturbances. Bioremediation has emerged as a promising approach to address these challenges, utilizing the natural capabilities of microorganisms to degrade or remove these contaminants. This review examines the current strategies employed in the bioremediation of personal care products and detergents, with a specific focus on their sustainability and environmental impact. This bioremediation is essential for environmental rejuvenation, as it uses living organisms to detergents and other daily used products. Its distinctiveness stems from sustainable, nature-centric ways that provide eco-friendly solutions for pollution eradication and nurturing a healthy planet, all while avoiding copying. Explores the use of microbial consortia, enzyme-based treatments, and novel biotechnological approaches in the context of environmental remediation. Additionally, the ecological implications and long-term sustainability of these strategies are assessed. Understanding the strengths and limitations of these bioremediation techniques is essential for developing effective and environmentally friendly solutions to mitigate the impact of personal care products and detergents on ecosystems.

Microbial innovations in chromium remediation: mechanistic insights and diverse applications

The ubiquity of hexavalent chromium (Cr(VI)) from industrial activities poses a critical environmental threat due to its persistence, toxicity and mutagenic potential. Traditional physico-chemical methods for its removal often entail significant environmental drawbacks. Recent advancements in remediation strategies have emphasized nano and bioremediation techniques as promising avenues for cost-effective and efficient Cr(VI) mitigation. Bioremediation harnesses the capabilities of biological agents like microorganisms, and algae to mitigate heavy metal contamination, while nano-remediation employs nanoparticles for adsorption purposes. Various microorganisms, including E. coli, Byssochlamys sp., Pannonibacter phragmitetus, Bacillus, Aspergillus, Trichoderma, Fusarium, and Chlorella utilize bioreduction, biotransformation, biosorption and bioaccumulation mechanisms to convert Cr(VI) to Cr(III). Their adaptability to different environments and integration with nanomaterials enhance microbial activity, offering eco-friendly solutions. The study provides a brief overview of metabolic pathways involved in Cr(VI) bioreduction facilitated by diverse microbial species. Nitroreductase and chromate reductase enzymes play key roles in nitrogen and chromium removal, with nitroreductase requiring nitrate and NADPH/NADH, while the chromium reductase pathway relies solely on NADPH/NADH. This review investigates the various anthropogenic activities contributing to Cr(VI) emissions and evaluates the efficacy of conventional, nano-remediation, and bioremediation approaches in curbing Cr(VI) concentrations. Additionally, it scrutinizes the mechanisms underlying nano-remediation techniques for a deeper understanding of the remediation process. It identifies research gaps and offers insights into future directions aimed at enhancing the real-time applicability of bioremediation methods for mitigating with Cr(VI) pollution and pave the way for sustainable remediation solutions.

Recovery mechanism of bio-promoters on Cr(VI) suppressed denitrification: Toxicity remediation and enhanced electron transmission

Although the biotoxicity of heavy metals has been widely studied, there are few reports on the recovery strategy of the inhibited bio-system. This study proposed a combined promoter-I (Primary promoter: l-cysteine, biotin, and cytokinin + Electron-shuttle: PMo12) to recover the denitrification suppressed by Cr(VI). Compared with self-recovery, combined promoter-I shortened the recovery time of 28 cycles, and the recovered reactor possessed more stable long-term operation performance with >95 % nitrogen removal. The biomass increased by 7.07 mg VSS/(cm3 carrier) than self-recovery due to the promoted bacterial reproduction, thereby reducing the toxicity load of chromium per unit biomass. The combined promoter-I strengthened the toxicity remediation by promoting 92.84 % of the intracellular chromium release and rapidly activating anti-oxidative stress response. During toxicity remediation, ROS content quickly decreased, and the PN/PS value was 2.27 times that of self-recovery. PMo12 relieved Cr(VI) inhibition on NO3--N reduction by increasing NAR activity. The enhanced intracellular and intercellular electron transmission benefited from the stimulated NADH, FMN, and Cyt.c secretion by the primary promoter and the improved transmembrane electron transmission by Mo. PMo12 and the primary promoter synergized in regulating community structure and improving microbial richness. This study provided practical approaches for microbial toxicity remediation and maintaining high-efficiency denitrification.

Recent advances in enhanced technology of Cr(VI) bioreduction in aqueous condition: A review

Due to the extensive application of chromate in industry, chromium-contaminated water has emerged as a significant hidden danger that threatens human health and the safety of the ecological environment. The reduction of Cr(VI) to Cr(III) through microbial processes has become one of the most notable methods for remediating water polluted by chromium due to its economic efficiency and environmentally friendly nature. However, several issues persist in its practical application, such as low reduction rates, the need for additional nutrients, and challenges in solid-liquid separation. Therefore, there is a growing focus on seeking enhanced methods for Cr(VI) microbial reduction, which has become a key area of research. This review represents the initial effort to systematically classify and summarize the means of enhancing Cr(VI) microbial reduction. It categorizes the enhancement methods into two main approaches: microbial-based and multi-method combined enhancement, offering detailed explanations for their mechanisms. This research provides both inspiration and theoretical support for the practical implementation of the Cr(VI) microbial reduction method.

Efficient removal of Cr (VI) from coal gangue by indigenous bacteria-YZ1 bacteria: Adsorption mechanism and reduction characteristics of extracellular polymer

The existence of heavy metals (especially Cr (VI)) in coal gangue has brought great safety risks to the environment. The indigenous bacteria (YZ1 bacteria) were separated and applied for removing Cr (VI) from the coal gangue, in which its tolerance to Cr (VI) was explored. The removal mechanism of Cr (VI) was investigated with pyrite in coal gangue, metabolite organic acids and extracellular polymer of YZ1 bacteria. The concentration of Cr (VI) could be stabilized around 0.012 mg/L by the treatment with YZ1 bacteria. The Cr (VI) tolerance of YZ1 bacteria reached 60 mg/L, and the removal efficiency of Cr (VI) was more than 95% by using YZ1 bacteria combined with pyrite. The organic acids had a certain reducing ability to Cr (VI) (removal efficiency of less than 10%). The extracellular polymers (EPS) were protective for the YZ1 bacteria resisting to Cr (VI). The polysaccharides and Humic-like substances in the soluble extracellular polymers (S-EPS) had strong adsorption and reduction effect on Cr (VI), in which the tryptophan and tyrosine proteins in the bound extracellular polymers (LB-EPS and TB-EPS) could effectively promote the reduction of Cr (VI). YZ1 bacteria could obviously reduce the damage of Cr (VI) from coal gangue to the environment.

Chromate-induced methylglyoxal detoxification system drives cadmium and chromate immobilization by Cupriavidus sp. MP-37

The detoxification of cadmium (Cd) or chromium (Cr) by microorganisms plays a vital role in bacterial survival and restoration of the polluted environment, but how microorganisms detoxify Cd and Cr simultaneously is largely unknown. Here, we isolated a bacterium, Cupriavidus sp. MP-37, which immobilized Cd(II) and reduced Cr(VI) simultaneously. Notably, strain MP-37 exhibited variable Cd(II) immobilization phenotypes, namely, cell adsorption and extracellular immobilization in the co-presence of Cd(II) and Cr(VI), while cell adsorption in the presence of Cd(II) alone. To unravel Cr(VI)-induced extracellular Cd(II) immobilization, proteomic analysis was performed, and methylglyoxal-scavenging protein (glyoxalase I, GlyI) and a regulator (YafY) showed the highest upregulation in the co-presence of Cd(II) and Cr(VI). GlyI overexpression reduced the intracellular methylglyoxal content and increased the immobilized Cd(II) content in extracellular secreta. The addition of lactate produced by GlyI protein with methylglyoxal as substrate increased the Cd(II) content in extracellular secreta. Reporter gene assay, electrophoretic mobility shift assay, and fluorescence quenching assay demonstrated that glyI expression was induced by Cr(VI) but not by Cd(II), and that YafY positively regulated glyI expression by binding Cr(VI). In the pot experiment, inoculation with the MP-37 strain reduced the Cd content of Oryza sativa L., and their secreted lactate reduced the Cr accumulation in Oryza sativa L. This study reveals that Cr(VI)-induced detoxification system drives methylglyoxal scavenging and Cd(II) extracellular detoxification in Cd(II) and Cr(VI) co-existence environment.

Genome analysis of Shewanella putrefaciens 4H revealing the potential mechanisms for the chromium remediation

Microbial remediation of heavy metal polluted environment is ecofriendly and cost effective. Therefore, in the present study, Shewanella putrefaciens stain 4H was previously isolated by our group from the activated sludge of secondary sedimentation tank in a dyeing wastewater treatment plant. The bacterium was able to reduce chromate effectively. The strains showed significant ability to reduce Cr(VI) in the pH range of 8.0 to 10.0 (optimum pH 9.0) and 25-42 ℃ (optimum 30 ℃) and were able to reduce 300 mg/L of Cr(VI) in 72 h under parthenogenetic anaerobic conditions. In this paper, the complete genome sequence was obtained by Nanopore sequencing technology and analyzed chromium metabolism-related genes by comparative genomics The genomic sequence of S. putrefaciens 4H has a length of 4,631,110 bp with a G + C content of 44.66% and contains 4015 protein-coding genes and 3223,  2414, 2343 genes were correspondingly annotated into the COG, KEGG, and GO databases. The qRT-PCR analysis showed that the expression of chrA, mtrC, and undA genes was up-regulated under Cr(VI) stress. This study explores the Chromium Metabolism-Related Genes of S. putrefaciens 4H and will help to deepen our understanding of the mechanisms of Cr(VI) tolerance and reduction in this strain, thus contributing to the better application of S. putrefaciens 4H in the field of remediation of chromium-contaminated environments.

Ultrafast removal of toxic Cr(VI) by the marine bacterium Vibrio natriegens

The fastest-growing microbe Vibrio natriegens is an excellent platform for bioproduction processes. Until now, this marine bacterium has not been examined for bioremediation applications, where the production of substantial amounts of biomass would be beneficial. V. natriegens can perform extracellular electron transfer (EET) to Fe(III) via a single porin-cytochrome circuit conserved in Vibrionaceae. Electroactive microbes capable of EET to Fe(III) usually also reduce toxic metals such as carcinogenic Cr(VI), which is converted to Cr(III), thus decreasing its toxicity and mobility. Here, the performance of V. natriegens was explored for the bioremediation of Cr(VI). At a density of 100 mg/mL, V. natriegens removed 5-20 mg/L Cr(VI) within 30 s and 100 mg/L Cr(VI) within 10 min. In comparison, the model bacterium Escherichia coli grown to a comparable cell density removed Cr(VI) 36 times slower. To eliminate Cr(VI), V. natriegens had to be metabolically active, and functional outer-membrane c-type cytochromes were required. At the end of the Cr(VI) removal process, V. natriegens had reduced all of it into Cr(III) while adsorbing more than half of the metallic ions. These results demonstrate that V. natriegens, with its fast metabolism, is a viable option for the rapid treatment of aqueous pollution with Cr.

Systems biology of chromium-plant interaction: insights from omics approaches

Plants are frequently subjected to heavy metal (HM) stress that impedes their growth and productivity. One of the most common harmful trace metals and HM discovered is chromium (Cr). Its contamination continues to increase in the environment due to industrial or anthropogenic activities. Chromium is severely toxic to plant growth and development and acts as a human carcinogen that enters the body by inhaling or taking Cr-contaminated food items. Plants uptake Cr via various transporters, such as sulfate and phosphate transporters. In nature, Cr is found in various valence states, commonly Cr (III) and Cr (VI). Cr (VI) is soil's most hazardous and pervasive form. Cr elevates reactive oxygen species (ROS) activity, impeding various physiological and metabolic pathways. Plants have evolved various complex defense mechanisms to prevent or tolerate the toxic effects of Cr. These defense mechanisms include absorbing and accumulating Cr in cell organelles such as vacuoles, immobilizing them by forming complexes with organic chelates, and extracting them by using a variety of transporters and ion channels regulated by various signaling cascades and transcription factors. Several defense-related proteins including, metallothioneins, phytochelatins, and glutathione-S-transferases aid in the sequestration of Cr. Moreover, several genes and transcriptional factors, such as WRKY and AP2/ERF TF genes, play a crucial role in defense against Cr stress. To counter HM-mediated stress stimuli, OMICS approaches, including genomics, proteomics, transcriptomics, and metallomics, have facilitated our understanding to improve Cr stress tolerance in plants. This review discusses the Cr uptake, translocation, and accumulation in plants. Furthermore, it provides a model to unravel the complexities of the Cr-plant interaction utilizing system biology and integrated OMICS approach.

A novel approach to modify Stenotrophomonas sp. D6 by regulating the salt composition in the growth medium: Enhanced removal performance of Cr(VI)

In this study, a novel and effective modified microbial reducing agent was developed to detoxify Cr(VI) from aqueous solutions. This was achieved by carefully controlling specific salt components in the growth medium. Based on the single-salt modification, several effective modified salts were selected and added to the medium for synergistic modification. The results showed that the synergistic modification with NH4Cl and KH2PO4 had the best detoxification effect on Cr(VI), reaching 98.5% at 100 mg/L Cr(VI), which was much higher than the 43.7% of the control (original Luria-Bertani medium). This enhancement was ascribed to the ability of NH4Cl and KH2PO4 to stimulate the growth of Stenotrophomonas sp. D6 promoted chromate reductase secretion. The protein content of the modified medium supernatant was significantly increased by 10.76% compared to that before modification. Based on the micro-characterization, the main process for the elimination of Cr(VI) is microbial reduction rather than biosorption. Most of the reduced Cr was found in the extracellular suspension, thereby suggesting that the primary reduction occurred outside the cells, whereas only a small fraction was detected intracellularly. Overall, this study provides a simple and effective method for microbial treatment of heavy metals in aqueous solutions.

Bacteria-driven copper redox reaction coupled electron transfer from Cr(VI) to Cr(III): A new and alternate mechanism of Cr(VI) bioreduction

Cr(VI) released into the environment inevitably co-exists with other contaminants, such as heavy metal ions, thus altering the performance of bacteria for Cr(VI) reduction; however, the mechanism underlying Cr(VI)-reducing bacterial response to heavy metal ions remains elusive. Herein, we investigate the toxic effects of Cu(II) and Cr(VI) on Cr(VI)-reducing bacterium Pannonibacter phragmitetus D-6 (hereafter D-6), which changes the primary metabolic pattern of Cr(VI). At Cu(II) concentrations of 10-100 mg/L, the efficiency of Cr(VI) reduction increases significantly. The co-exposure of Cr(VI) and Cu(II) induces D-6 to preferentially respond to Cu(II) through electrostatic forces, which is then reduced to Cu(I) outside and inside the bacterial cells. The original pathways for Cr(VI) reduction are weakened via downregulating genes related to Cr(VI) transport and reduction. A new mechanism involving Cu(II)-mediated electron transfer from D-6 to Cr(VI) is elucidated. Specially, Cu(II) accumulates around the cells as an electron shuttle and promotes Cr(VI) reduction. Genes encoding cytochromes involved in electron transfer are significantly up-regulated, thus promoting Cu(II) reduction. The Cu(II)/Cu(I) redox cycle ensures the continuous bioremoval of Cr(VI) in a cycle test. This study reveals an overlooked mechanism for Cr(VI) reduction, which provides theoretical guidance for designing practical microbial process to remediate Cr(VI) contamination.

Remediation materials for the immobilization of hexavalent chromium in contaminated soil: Preparation, applications, and mechanisms

Hexavalent chromium is a toxic metal that can induce severe chromium contamination of soil, posing a potential risk to human health and ecosystems. In recent years, the immobilization of Cr(VI) using remediation materials including inorganic materials, organic materials, microbial agents, and composites has exhibited great potential in remediating Cr(VI)-contaminated soil owing to the environmental-friendliness, short period, simple operation, low cost, applicability on an industrial scale, and high efficiency of these materials. Therefore, a systematical summary of the current progress on various remediation materials is essential. This work introduces the production (sources) of remediation materials and examines their characteristics in detail. Additionally, a critical summary of recent research on the utilization of remediation materials for the stabilization of Cr(VI) in the soil is provided, together with an evaluation of their remediation efficiencies toward Cr(VI). The influences of remediation material applications on soil physicochemical properties, microbial community structure, and plant growth are summarized. The immobilization mechanisms of remediation materials toward Cr(VI) in the soil are illuminated. Importantly, this study evaluates the feasibility of each remediation material application for Cr(VI) remediation. The latest knowledge on the development of remediation materials for the immobilization of Cr(VI) in the soil is also presented. Overall, this review will provide a reference for the development of remediation materials and their application in remediating Cr(VI)-contaminated soil.

Cr(VI) removal from wastewater using nano zero-valent iron and chromium-reducing bacteria

Significant global efforts are currently underway to alleviate the presence of toxic metals in water bodies, aiming to encourage a sustainable environment. Nevertheless, the scientific community has yet to methodically inspect the performance and mechanisms underlying the interaction between nanomaterials and microorganisms in this context. Therefore, this study seeks to address this knowledge gap by developing a novel system that integrates nano zero-valent iron (nZVI) with chromium-reducing bacteria (CrRB) to efficiently remove Cr(VI) from water sources. The combined use of RBC600 and CrRB resulted in a Cr(VI) removal rate of 77.73%, displaying a substantial improvement of 17.61% compared to the use of CrRB alone. The efficacy of Cr(VI) elimination was observed to be affected by several factors within the system, such as the pH value, the quantity of nZVI added, the degree of CrRB inoculation, and the initial concentration of Cr(VI) at the onset of the experiment. When the pH was adjusted to 5, the complete removal of 200 mg/L Cr(VI) was achieved within 36 h. Increasing the dosage of nZVI to above 2 g/L resulted in the complete elimination of Cr(VI) from the solution within 72 h. This can be attributed to the availability of more reaction sites for the reduction of Cr(VI), facilitated by the higher nZVI dose. Additionally, the increased dose of nZVI allowed for the dissolution of more reactive Fe(II) ions. The characterization analysis, high-throughput sequencing, and fluorescence quantitative PCR results have established that CrRB and its extracellular polymer effectively reduce and complex Cr(VI). This process facilitated the dissolution of the passivated layer on the surface of nZVI, thus significantly enhancing the efficiency of nZVI in responding to Cr(VI). Additionally, the presence of nZVI created a favorable living environment for CrRB, resulting in increased richness and diversity within the CrRB community. These findings provide valuable preliminary insights into the mechanism underlying Cr(VI) elimination by the synergistic interaction between nZVI and CrRB. Therefore, this study establishes a solid theoretical foundations for the application of nano-bio synergy in the remediation of Cr(VI).

Removal of Cr6+ ions and mordant violet 40 dye from liquid media using Pterocladia capillacea red algae derived activated carbon-iron oxides

In recent years, water pollution has become one of the most dangerous problems facing the world. Pollution of water with heavy metals and different dyes has caused many harmful effects on human health, living organisms and our environment. In this study, iron oxide nanomagnetic composite from Pterocladia Capillacea red algae-derived activated carbon (PCAC-IO) was synthesized by co-precipitation method using different iron salts and different base solutions. The synthesized nanocomposite was investigated with various characterization techniques such as FTIR, BET, SEM-EDX, TEM, XRD, and VSM. The obtained PCAC-IO adsorbent was used for Cr6+ ions and Mordant Violet 40 (MV40) dye removal. The adsorption mechanism of Cr6+ ions and MV40 dye on PCAC-IO was examined using several adsorption and kinetic isotherm models. Langmuir and Freundlich models were investigated using experimental data. Pseudo-first-order (PFO), Pseudo-second-order (PSO) and intraparticle diffusion models (IPDM) were applied to identify the adsorption mechanism. It has shown that the PSO kinetic model fits better with the experimental data obtained from PCAC-IO. This result can be interpreted as the adsorption of the adsorbate on the nanocomposite as chemical adsorption. The optimum conditions for maximum Cr6+ ions removal (96.88%) with PCAC-IO adsorbent occur at room temperature, 5 g L-1 adsorbent concentration, 100 mg L-1 initial pollutant concentration, pH 1 and at the end of 180 min, while maximum MV40 dye removal (99.76%), other conditions being the same, unlikely it occurred at pH 2.06 and after 45 min. The most suitable model for Cr6+ ions removal under the conditions of 1 L-1 g adsorbent concentration and 400 mg L-1 adsorbate concentration was Langmuir (Qmax = 151.52 mg g-1), while for MV40 removal it was Freundlich (Qmax = 303.03 mg g-1). We propose the use of activated carbon-supported iron oxide prepared from bio-waste material, especially from Pterocladia Capillacea red algae, as a promising adsorbent with high efficiency in the removal of Cr6+ ions and MV40 dye from aqueous media.

Symbiotic hemolymph bacteria reduce hexavalent chromium to protect the host from chromium toxicity in Procambarus clarkii

Hexavalent chromium (Cr(VI)) is a cytotoxic heavy metal pollutant that adversely affects all life forms. Interestingly, the crustacean Procambarus clarkii exhibits a relatively high tolerance to heavy metals. The underlying mechanisms remain unclear. In this study, we investigated the role of symbiotic bacteria in P. clarkii in alleviating Cr(VI)-induced damage and explored their potential mechanisms of action. Through transcriptomic analysis, we observed that Cr(VI) activated P. clarkii's antimicrobial immune responses and altered the bacterial composition in the hemolymph. After antibiotic treatment to reduce bacterial populations, Cr(VI)-induced intestinal and liver damage worsened, and crayfish exhibited lower levels of GSH/CAT/SOD activity. The Exiguobacterium, the symbiotic bacteria in the hemolymph of P. clarkii, were proved to be primary contributor to Cr(VI) tolerance. Further investigation suggested that it resists Cr(VI) through the activation of the ABC transporter system and the reduction of Cr(VI) via the reductase gene nfsA. To validate the role of Exiguobacterium in Cr(VI) tolerance, crayfish treated with antibiotics then supplemented with Exiguobacterium H6 and recombinant E. coli (with the nfsA gene), reduced Cr(VI)-induced ovarian damage. Overall, this study revealed that the symbiotic bacteria Exiguobacterium can absorb and reduce hexavalent chromium, mitigating Cr(VI)-induced damage in P. clarkii. These findings provide new insights into hexavalent chromium tolerance mechanisms in crustaceans.