Controllable synthesis of ZnO nanoparticles and their morphology-dependent antibacterial and optical properties

Microscopic morphology modulation and microwave absorption properties of nano-ZnO

Electromagnetic waves can cause varying degrees of damage to the human body and equipment, making the development of unique nanostructured materials with excellent reflection loss (RL), minimal thickness, wide frequency band, and light weight highly valued. To enhance the efficiency of microwave absorption, this study employs the hydrothermal method, using copper sheets as substrates, and varying the concentration of precursors, reaction time, and reaction temperature, successfully preparing three different morphologies of nano-ZnO (flake-like, flower-like, and rod-like). The electromagnetic properties and wave absorption performance of the obtained three morphologies were analyzed. The microwave loss effect of ZnO mainly comes from the sample's dielectric polarization, interfacial polarization, and multiple reflections. By comparing the different morphologies of ZnO, rod-like ZnO has better impedance matching and attenuation capabilities. When mixed with paraffin at a mass ratio of 20 wt% and a thickness of d = 3.5 mm, the sample exhibits good wave absorption performance (-11.02 dB) and an effective absorption bandwidth of 2.42 GHz. When rod-like ZnO is mixed with paraffin wax at 50 wt%, the maximum scattering loss is -19.2 dB and the effective absorption bandwidth is 1.5 GHz at a thickness of 4.5 mm and 16.82 GHz. There are significant differences in the absorption of electromagnetic waves by nano-ZnO with different microstructures, making it particularly important to study the absorption characteristics and microwave loss mechanisms of ZnO with specific morphologies.

Study of shape of zinc oxide nanoparticles on the in-vitro and in-vivo performance of polymeric hydrogels for wound dressing

Extensive fluid loss, tissue damage, and bacterial infection are some important aspects that need to be addressed for designing ideal burn wound dressings. Hydrogel-based dressings cater to most of these functions; additionally, the incorporation of metal oxide nanoparticles (NPs) provides antibacterial properties that enhance the performance of wound dressings. We report here for the first time, how by employing different shapes of ZnO NPs, viz quasi-spherical, floral, and rods; in hydrogels made of PVA - P(AMPS) (Poly (vinyl alcohol) (PVA) - Poly (2-Acrylamido-2-Methyl Propane Sulfonic Acid)) along with g-C3N4, one could correlate structure-property relationships to wound healing efficiency. The incorporation of g-C3N4 was to enhance the thermo-mechanical stability of hydrogel, Maximum tensile strength of the hydrogel was obtained for 150 mg of g-C3N4 incorporated hydrogels, same amount being used for other systems studied. The impact of the incorporation of different shapes and amounts of ZnO NPs on the hydrogels has been studied and our results show maximum swelling ability (∼110 %), high moisture retention capacity (>90 %), and moderate water vapor transmission rate (82 g/m2h) for selected systems. Among these different shapes incorporated hydrogels, remarkable enhancement in tensile strength (76 %) was observed for quasi-spherical ZnO NPs incorporated hydrogels compared to bare. These hydrogels showed high cell viability (>70 %), high antibacterial activities against E. coli and S. aureus, and high wound healing efficiency (>80 %) in an in-vivo rat model, proving their potential to be used in wound dressing applications.

ZnO Nanoparticle-Infused Vaterite Coatings: A Novel Approach for Antimicrobial Titanium Implant Surfaces

Loss of implant function is a common complication in orthopaedic and dental surgery. Among the primary causes of implant failure are peri-implant infections which often result in implant removal. This study demonstrates the development of a new antimicrobial titanium coating with ZnO nanoparticles of various sizes and morphologies immobilised in poly(allylamine hydrochloride) and alginate multilayers, combined with epitaxially grown vaterite crystals. The coated samples were characterised with various methods (FTIR, XRD, SEM) and surface properties were evaluated via water contact angle and surface charge measurements. Zinc ion release was quantified using ICP-MS. The antimicrobial efficacy of the coatings was tested against Staphylococcus aureus, Staphylococcus epidermidis, and Candida albicans while the biocompatibility was tested with preosteoblast cells (MC3T3-E1). Results demonstrated the successful preparation of a calcium carbonate/ZnO composite coating with epitaxially grown vaterite on titanium surfaces. The Zn ions released from ZnO nanoparticles dramatically influenced the morphology of vaterite where a new flower-like morphology was observed. The coated titanium surfaces exhibited robust antimicrobial activity, achieving over 90% microbial viability reduction for Staphylococcus aureus, Staphylococcus epidermidis, and Candida albicans. Importantly, the released Zn2+ concentrations remained below the cytotoxicity limit for MC3T3-E1 cells, showing potential for safe and effective implant applications.

Durable Antimicrobial Microstructure Surface (DAMS) Enabled by 3D-Printing and ZnO Nanoflowers

Numerous studies have been trying to create nanomaterial-based antimicrobial surfaces to prevent infections due to bacterial growth. One major challenge in real-world applications of these surfaces is their mechanical durability. In this study, we introduce durable antimicrobial microstructure surface (DAMS), which integrates DLP 3D-printed microstructures with zinc oxide (ZnO) nanoflowers. The microstructures function as protection armor for the nanoflowers during abrasion. The antimicrobial ability was evaluated by immersing in 2E8 CFU/mL Escherichia coli (E. coli) suspension and then evaluated using electron microscopy. Our results indicated that DAMS reduced bacterial coverage by more than 90% after 12 h of incubation and approximately 50% after 48 h of incubation before abrasion. More importantly, bacterial coverage was reduced by approximately 50% after 2 min of abrasion with a tribometer, and DAMS remains effective even after 6 min of abrasion. These findings highlight the potential of DAMS as an affordable, scalable, and durable antimicrobial surface for various biomedical applications.

An Assay on the Antibactericidal Functionality of Synthesized Mg-Doped ZnO Nanoparticles on the Dental Microbes

We succeeded in producing pure and magnesium-doped zinc oxide nanoparticles (Mg-Zn NPs) by making use of a Prosopis farcta leaf extract and subsequently distinguished the quality of our NPs with the use of field energy scanning electron microscopy (FESEM), energy-dispersive X-ray (EDX), powder X-ray diffraction (PXRD), and UV-vis. In correlation to our observations, the particulates were spherically produced at a size of 20 nm with the ability to cause antimicrobial impacts on Streptococcus mutans bacteria and Candida albicans fungi. Inhibition zones of 18 ± 0.3 and 24 ± 0.3 mm were obtained for 5% Mg-Zn NPs against bacteria and fungi, respectively. Based on these results, our work suggests a practicable proposition for our synthesized product to be considered as a worthy alternative for dental and oral utilizations.

Eco-friendly zinc oxide nanoparticle biosynthesis powered by probiotic bacteria

The rapid advancement of nanotechnology, particularly in the realm of pharmaceutical sciences, has significantly transformed the potential for treating life-threatening diseases. A pivotal aspect of this evolution is the emergence of "green nanotechnology," which emphasizes the environmentally sustainable synthesis of raw materials through biological processes. This review focuses on the biological synthesis and application of zinc oxide (ZnO) nanoparticles (NPs) from probiotic bacteria, particularly those sourced from wastewater. Microorganisms from wastewater tolerate harmful elements and enzymatically convert toxic heavy metals into eco-friendly materials. These probiotic bacteria are instrumental in the synthesis of ZnO NPs and exhibit remarkable antimicrobial properties with diverse industrial applications. As the challenge of drug-resistant pathogens escalates, innovative strategies for combating microbial infections are essential. This review explores the intersection of nanotechnology, microbiology, and antibacterial resistance, highlighting the importance of selecting suitable probiotic bacteria for synthesizing ZnO NPs with potent antibacterial activity. Additionally, the review addresses the biofunctionalization of NPs and their applications in environmental remediation and therapeutic innovations, including wound healing, antibacterial, and anticancer treatments. Eco-friendly NP synthesis relies on the identification of these suitable microbial "nano-factories." Targeting probiotic bacteria from wastewater can uncover new microbial NP synthesis capabilities, advancing environmentally friendly NP production methods. KEY POINTS: • Innovative strategies are needed to combat drug-resistant pathogens like MRSA. • Wastewater-derived probiotic bacteria are an eco-friendly method for ZnO synthesis. • ZnO NPs show significant antimicrobial activity against various pathogens.

Nanocarrier-Mediated Dermal Drug Delivery System of Antimicrobial Agents for Targeting Skin and Soft Tissue Infections

Antimicrobial resistance in disease-causing microbes is seen as a severe problem that affects the entire world, makes therapy less effective, and raises mortality rates. Dermal antimicrobial therapy becomes a desirable choice in the management of infectious disorders since the rising resistance to systemic antimicrobial treatment frequently necessitates the use of more toxic drugs. Nanoparticulate systems such as nanobactericides, which have built-in antibacterial activity, and nanocarriers, which function as drug delivery systems for conventional antimicrobials, are just two examples of the treatment methods made feasible by nanotechnology. Silver nanoparticles, zinc oxide nanoparticles, and titanium dioxide nanoparticles are examples of inorganic nanoparticles that are efficient on sensitive and multidrug-resistant bacterial strains both as nanobactericides and nanocarriers. To stop the growth of microorganisms that are resistant to standard antimicrobials, various antimicrobials for dermal application are widely used. This review covers the most prevalent microbes responsible for skin and soft tissue infections, techniques to deliver dermal antimicrobials, topical antimicrobial safety concerns, current issues, challenges, and potential future developments. A thorough and methodical search of databases, such as Google Scholar, PubMed, Science Direct, and others, using specified keyword combinations, such as "antimicrobials," "dermal," "nanocarriers," and numerous others, was used to gather relevant literature for this work.

Influence of surface texture: A comparative study on antibacterial activities of morphologically tailored zinc oxide

The morphology-dependent antibacterial activity of zinc oxide (ZnO) nanoparticles with three different morphologies, nanowall (NW), nanosphere (NS), and, nanorod (NR) was rigorously investigated to elucidate the influence of shape and size on their performance. Their morphological, surface, and structural characteristics were meticulously analyzed using SEM, BET, and XRD techniques. The antibacterial activity of synthesized ZnO samples was initially investigated and validated through in silico docking studies against nine bacterial strains, specifically targeting 1GCI, 2DCJ, 6KMM and 3T07, 6KVQ, 1MWT from gram-positive Bacillus sp. and Staphylococcus sp. respectively, 6N38, 6CRT, 6GRH from gram-negative E. coli. The docking simulations were performed using Autodock 4.2 software, yielding promising results characterized by negative binding energies, indicative of favorable interactions. The invitro studies were assessed against three same bacteria mentioned above using the disk diffusion method. The results demonstrated a pronounced dependency of antibacterial activity on the surface area, average crystallite size, and surface roughness of ZnO samples. ZnO (NW) exhibited markedly superior antibacterial properties. This enhanced efficacy is attributed to their higher surface area to volume ratio, smaller average crystallite size and increased surface roughness facilitating more efficient interactions with bacterial cell membranes. ZnO (NR) nanoparticles exhibited enhanced antibacterial activity despite minimal surface area.

Zinc oxide nanomaterials: Safeguarding food quality and sustainability

In this era, where food safety and sustainability are paramount concerns, the utilization of zinc oxide (ZnO) nanoparticles (NPs) is a promising solution to enhance the safety, quality, and sustainability of food products. ZnO NPs in the food industry have evolved significantly over time, reflecting advancements in synthesizing methods, antimicrobial activities, and risk assessment considerations for human health and the environment. This comprehensive review delves into the historical trajectory, current applications, and prospects of ZnO NPs in food-related contexts. Synthesizing methods, ranging from solvothermal and solgel techniques to laser ablation and microfluidic reactors, have facilitated the production of ZnO NPs with tailored properties suited for diverse food applications. The remarkable antimicrobial activity of ZnO NPs against a wide spectrum of pathogens has garnered attention for their potential to enhance food safety and extend shelf-life. Furthermore, comprehensive risk assessment methodologies have been employed to evaluate the potential impacts of ZnO NPs on human health and the environment, regarding toxicity, migration, and ecological implications. By navigating the intricate interplay between synthesis methods, antimicrobial efficacy, inhibitory mechanisms, and risk assessment protocols, by elucidating the multifaceted role of ZnO NPs in shaping the past, present, and future of the food industry, this review offers valuable insights and promising avenues for researchers, policymakers, and industry stakeholders to enhance food safety, quality, and sustainability.

The Green Synthesis of Carbon Quantum Dots through One-step Hydrothermal Approach by Orange Juice for Rapid, and Accurate Detection of Dopamine

In the current study, the fluorescent Carbon quantum dots (CDs) were synthesized through one-step hydrothermal approach by orange juice without any additional agents. The as-prepared green-CDs (GCDs) were quasi-spherical shape ranged from 2 to 8 nm with an average diameter of 5 nm, and emitted bright blue fluorescent (FL) under ultraviolet light irradiation (Uv). Different detailed analyses proved that the as-prepared GCDs had good morphologies, various functional groups, high water solubility, great optical features, and excellent stability towards diverse environmental conditions. The results indicated that the as-prepared GCDs can detect different concentrations of dopamine from 1 to 100 µM based on the quenching of their native fluorescent. Furthermore, the good linear relationship was obtained for dopamine in the broad range of concentrations from 1 to 100 µM with the limit of detection (LOD) of 0.81 µM. In addition, the as-prepared GCDs can be applied as a fluorescent probe for detection of dopamine in the different real samples.

Green synthesis of silver and gold-doped zinc oxide nanocomposite with propolis extract for enhanced anticancer activity

Metal and metal oxide nanocomposites have unique properties and are promising for antibacterial and anticancer applications. In this work, we aimed to highlight the relationship between the biosynthesis ways of silver and gold-doped zinc oxide nanocomposites and their functions as anticancer on cell lines (MCF-7 and HepG2). The propolis was used to biosynthesize four different nanoparticles with the same components, including zinc, gold and silver. The nanocomposites were characterized using various techniques, including ultraviolet-visible spectroscopy (UV-Vis), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Energy Dispersive X-ray analysis (EDX) and cytotoxicity assays. The result of this study showed that formed nanocomposites have a similar level of Zn, Au, and Ag, ranging from 23-34%, 2-6%, and 2-3%, respectively. In addition, adding the components simultaneously produces the fastest color change, and the fabricated nanoparticles have spherical shapes with different layers. In addition, the prepared nanoparticles influenced the cell viability of the cancer cell lines, with the most effective one when Zn, Au, and Ag were added spontaneously to form a nanocomposite called (All) with IC50 of 24.5 µg/mL for MCF7 cells and 29.1 µg/mL for HepG2 cells. Thus, the study illustrates that the preparation of nanocomposite generated through green synthesis with different methods significantly affects the structure and function and may improve the synthesis of nanocomposite to be developed into an efficacious therapeutic agent for cancers. In addition, this study opens the door toward a novel track in the field of nanocomposites as it links the synthesis with structure and function. Further anti-cancer properties, as well as animal testing are needed for those nanocomposites.

Application of nano-ZnO in the food preservation industry: antibacterial mechanisms, influencing factors, intelligent packaging, preservation film and safety

In recent years, how to improve the functional performance of food packaging materials has received increasing attention. One common inorganic material, nanometer zinc oxide (ZnO-NPs), has garnered significant attention due to its excellent antibacterial properties and sensitivity. Consequently, ZnO-NP-based functional packaging materials are rapidly developing in the food industry. However, there is currently a lack of comprehensive and systematic reviews on the use of ZnO-NPs as functional fillers in food packaging. In this review, we introduced the characteristics and antibacterial mechanism of ZnO-NPs, and paid attention to the factors affecting the antibacterial activity of ZnO-NPs. Furthermore, we systematically analyzed the application of intelligent packaging and antibacterial packaging containing ZnO-NPs in the food industry. At the same time, this paper also thoroughly investigated the impact of ZnO-NPs on various properties including thickness, moisture resistance, water vapor barrier, mechanical properties, optical properties, thermal properties and microstructure of food packaging materials. Finally, we discussed the migration and safety of ZnO-NPs in packaging materials. ZnO-NPs are safe and have negligible migration rates, simultaneously their sensitivity and antibacterial properties can be used to detect the quality changes of food during storage and extend its shelf life.

Evaluation of the teratogenic potency of bulk zinc oxide and its nanoparticles on embryos of the freshwater snail, Helisoma duryi

Bulk zinc oxide (ZnO-BPs) and its nanoparticles (ZnO-NPs) are frequently used in various products for humans. Helisoma duryi embryos can serve as effective model organisms for studying the toxicity of NPs. This study aimed to compare the teratogenic potency of ZnO-BPs and ZnO NPs in the embryonic stages of H. duryi to evaluate the utility of this snail as a bioindicator for ZnO-NPs in the aquatic environment. The mechanisms of teratogenesis were evaluated by determination of the LC50, studying the effect of sub-lethal concentrations of both ZnO forms on the embryos, and studying their enzyme activity, oxidative stress, and biochemical analysis. The SDS-PAGE electrophoresis was undertaken to assess the effect of ZnO-BPs and ZnO NPs on protein synthesis. The results revealed that the veliger stage of H. duryi is the specific stage for bulk and nano ZnO. ZnO-NPs proved to be more toxic to snails' embryos than ZnO-BPs. Exposure to ZnO influences specific types of defects in development, which in the case of BPs are far less drastic than those caused by NPs. Thus, the toxicity of ZnO-NPs in embryonic development is due to their unique physicochemical properties. The observed malformations include mainly hydropic malformation, exogastrulation, monophthalmia, shell misshapen, and cell lyses. Almost all tested oxidative biomarkers significantly changed, revealing that ZnONPs display more oxidative stress than ZnO-BPs. Also, the low concentration of ZnO induces many disturbances in the organic substances of veliger larvae, such as a decrease in the total protein and total lipid levels and an increase in the glycogen level. The results indicated that ZnO-BPs increase the number of protein bands. Conversely, ZnO-NPs concealed one band from treated egg masses, which was found in the control group. Embryos of snail are an appropriate model to control freshwater snails. This study demonstrates that H. duryi embryos can serve as effective model organisms to study the toxicity of ZnO-NPs.

Reproductive performance of freshwater snail, Helisoma duryi under the effect of bulk and nano zinc oxide

Nanotechnology has been used to apply nanoparticle essential elements to enhance the ability of animals to absorb these elements and consequently improve their reproductive performance. High concentrations of nanoparticles (NPs) can directly harm a range of aquatic life forms, ultimately contributing to a decline in biodiversity. Helisoma duryi snails are a good model for studying the toxicological effects of bulk zinc oxide (ZnO-BPs) and nano zinc oxide (ZnO-NPs) on freshwater gastropods. This study aimed to compare the toxic effects of ZnO-BPs and ZnO-NPs on H. duryi snails and explore how waterborne and dietary exposure influenced the reproductive performance of this snail. ZnO-BPs and ZnO-NPs were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray powder (XRD). This study revealed that the size of ZnO-BPs and ZnO-NPs were 154 nm and 11-31 nm, respectively. The results showed that exposure of adult snails to sub-lethal concentrations of both ZnO forms (bulk and nano) for 24 h/week for 4 weeks markedly changed their reproductive performance in a concentration-dependent manner, where fecundity was negatively affected by high concentrations. It was concluded that dietary exposure to the lowest tested concentration of ZnO-NPs (1 ppm) has a positive effect as the number of eggs and egg masses/snails increased and the incubation period decreased. Also, poly-vitelline eggs (The formation of twins) were observed. ZnO-NPs at low concentrations positively affect the reproductive performance of snails, especially after dietary exposure. The results revealed that 1 ppm ZnO-NPs could be supplementary provided to snails to improve their fertility, reduce the developmental time course, increase hatchability percentage, and produce poly-vitelline eggs.

Study of MIC of silver and zinc oxide nanoparticles, strong and cost-effective antibacterial against biofilm-producing Acinetobacter baumannii in Shiraz, Southwest of Iran

BACKGROUND

Acinetobacter baumannii resistant strains lead to increased mortality, treatment costs, and an increase in the length of hospitalization. Nowadays, nanoparticles are considered a substitute for antibiotics. This study aimed to determine the MIC of Silver (Ag) and Zinc Oxide (ZnO) Nanoparticles (NPs) on Biofilm-Producing Acinetobacter baumannii and determine the relationship between MIC and frequency of efflux pump genes in cutaneous specimens in Shiraz, Southwest Iran in 2021-2022.

METHODS

In this study, specimens were collected from April 2021 to June 2022 at Namazi and Faqihi Hospitals in Shiraz. Investigation of biofilm production in multidrug resistance (MDR) isolates was done by the microtiter plate method. Synthesized nanoparticles were characterized by UV-vis spectrum, X-ray diffraction (XRD), and electron microscopy. The MIC of AgNPs and ZnONPs for isolates was done using the method described in the CLSI guideline (2018). The antibacterial effect of MIC of NPs on inanimate objects was done by colony counts. The prevalence of efflux pump genes (adeR, adeC, adeA, abeM, adeK, adeI) was also investigated by PCR technique.

RESULTS

The highest ceftriaxone resistance (68%) and lowest colistin resistance (7%) were identified. 57% of isolates were MDR. In addition, 71.9% could produce biofilm and 28.1% of isolates could not produce biofilm. The average size of AgNPs and ZnONPs in the present study is 48 and < 70 nm, respectively. The nanoparticles were spherical. The MIC and the MBC of the ZnONPs were in the range of 125 to 250 µg/mL respectively. Also, for AgNPs, the MIC and the MBC were in the range of 62.5 to 250 µg/ml, respectively. AbeM gene had the highest frequency and the AdeK gene had the lowest frequency. Statistical analysis showed that there is a relationship between the frequency of adeA, adeC, and adeM genes with the MIC of AgNPs and ZnONPs.

CONCLUSION

According to the results of the present study, inanimate objects such as scalpels in contact with AgNPs (6000 µg/ml for 240 min) or ZnONPs (5000 µg/ml for 120 min) can be free of biofilm producing Acinetobacter baumannii  with efflux pump genes.

Green synthesis of ZnO nanocubes from Ceropegia omissa H. Huber extract for photocatalytic degradation of bisphenol An under visible light to mitigate water pollution

Plastic pollution has become a major environmental problem because it does not break down and poses risks to ecosystems and human health. This study focuses on the environmentally friendly synthesis of ZnO nanocubes using an extract from Ceropegia omissa H. Huber plant leaves. The primary goal is to investigate the viability of these nanocubes as visible-light photocatalysts for the degradation of bisphenol A (BPA). The synthesized ZnO nanocubes have a highly crystalline structure and a bandgap of 3.1 eV, making them suitable for effective visible-light photocatalysis. FTIR analysis, which demonstrates that the pertinent functional groups are present, demonstrates the chemical bonding and reducing processes that take place in the plant extract. The XPS method also studies zinc metals, oxygen valencies, and binding energies. Under visible light irradiation, ZnO nanocubes degrade BPA by 86% in 30 min. This plant-extract-based green synthesis method provides a long-term replacement for traditional procedures, and visible light photocatalysis has advantages over ultraviolet light. The study's results show that ZnO nanocubes may be good for the environment and can work well as visible light photocatalysts to break down organic pollutants. This adds to what is known about using nanoparticles to clean up the environment. As a result, this study highlights the potential of using environmentally friendly ZnO nanocubes as a long-lasting and efficient method of reducing organic pollutant contamination in aquatic environments.

Te4+ and Er3+ doped ZrO2 nanoparticles with enhanced photocatalytic, antibacterial activity and dielectric properties: A next generation of multifunctional material

Amid rising water contamination from industrial sources, tackling toxic dyes and pathogens is critical. Photocatalysis offers a cost-effective and eco-friendly solution to this pressing challenges. Herein, we synthesized Te4+ and Er3+ doped ZrO2 photocatalysts through hydrothermal method and investigated their efficacy in degrading Congo red (CR) and pathogens under visible light. XRD and Raman Spectroscopy confirm monoclinic and tetragonal mixed-phases without any impurities. Doping-induced defects, reduced crystalline diameter, high surface area, modified bandgap (2.95 eV), photoluminescence quenching, coupled with interfacial polarization, contribute to EZO's excellent dielectric response (1.149 × 106), for achieving remarkable photocatalytic activity, verified by photoelectrochemical measurements, LC-MS and phytotoxicity analysis. Under optimal conditions, EZO achieves 99% CR degradation within 100 min (TOC 79.9%), surpassing ZO (77%) and TZO (84%). Catalyst dosages, dye concentrations, and solution pH effect on EZO's photocatalytic performance are systematically assessed. Scavenging experiment emphasized the pivotal role of · OH in CR degradation with 96.4% efficiency after 4 cycles, affirming its remarkable stability. Moreover, EZO demonstrates ROS-mediated antibacterial activity against E. faecalis and E. coli bacteria under visible light, achieving >97% and >94% inhibition rate with an inhibition zone > 3 mm. Hence, the nanoparticle's dual action offers a practical solution for treating contaminated wastewater, ensuring safe irrigation.

Sonochemically synthesized black phosphorus nanoparticles: a promising candidate for piezocatalytic antibacterial activity with enhanced dielectric properties

The drawbacks inherent to traditional antibacterial therapies, coupled with the escalating prevalence of multi-drug resistant (MDR) microorganisms, have prompted the imperative need for novel antibacterial strategies. Accordingly, the emerging field of piezocatalysis in semiconductors harnesses mechanical stress to drive chemical reactions by utilizing piezo-generated free charge carriers, presenting a promising technology. To the best of our knowledge, this study is the first to provide a comprehensive overview of the eradication of pathogenic S. aureus bacteria using few-layer black phosphorus (SCBP) piezo catalyst under mechanical stimuli, along with the exploration of temperature dependent dielectric properties. The synthesis of the piezo catalysts involved a one-step cost-effective sonochemical method, and its structural, morphological, elemental, optical, and overall polarization properties were thoroughly characterized and compared with the traditional method-derived product (TABP). The synthesis-introduced defects, reduced crystalline diameters, modified bandgap (1.76 eV), nanoparticle aggregation, photoluminescence quenching, along with interfacial polarization, synergistically contribute to SCBP's exceptional dielectric response (4.596 × 107 @40 Hz), which in turn enhanced the piezocatalytic activity. When subjected to soft ultrasound stimulation at 15 kHz, the piezo catalyst SCBP demonstrated significant ROS-mediated antibacterial activity, resulting in a ∼94.7% mortality rate within 40 minutes. The impact of this study extends to cost-effective energy storage devices and advances in antibacterial therapy, opening new dimensions in both fields.

Optimizing Antimicrobial Efficacy: Investigating the Impact of Zinc Oxide Nanoparticle Shape and Size

Zinc oxide nanoparticles (ZnO NPs) have been investigated due to their distinct properties, variety of structures and sizes, and mainly for their antimicrobial activity. They have received a positive safety evaluation from the European Food Safety Authority (EFSA) for packaging applications as transparent ultraviolet (UV) light absorbers based on the absence of significant migration of zinc oxide in particulate form. ZnO NPs with different morphologies (spherical, flower, and sheet) have been synthesized via different sol-gel methods and extensively characterized by several solid-state techniques, namely vibrational spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS), Fourier Transform Infrared Spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-VIS), electron paramagnetic resonance (EPR), and nitrogen adsorption-desorption isotherms. The ZnO NPs were assessed for their antibacterial activity against Escherichia coli (gram-negative bacteria) and Staphylococcus aureus (gram-positive bacteria) to study the influence of morphology and size on efficacy. ZnO NPs with different morphologies and sizes demonstrated antimicrobial activity against both bacteria. The highest microbial cell reduction rate (7-8 log CFU mL-1 for E. coli and 6-7 log CFU mL-1 for S. aureus) was obtained for the sheet- and spherical-shaped NPs as a result of the high specific surface area. In fact, the higher surface areas of the sheet- and spherical-shaped nanoparticles (18.5 and 13.4 m2 g-1, respectively), compared to the flower-shaped NPs (5.3 m2g-1), seem to promote more efficient bacterial cell reduction. The spherical-shaped particles were also smaller (31 nm) compared with the flower-shaped (233 × 249 nm) ones. The flower ZnO NP resulted in a 4-5 log CFU mL-1 reduction for E. coli and 3-4 log CFU mL-1 reduction for S. aureus. The lower apparent antibacterial activity of the flower-shaped could be associated with either the lack of defects on the particle core or the shape shielding effect. Compared to S. aureus, E. coli seems to be less resistant to ZnO NPs, which may be explained by the characteristics of its cell membrane. With simple synthesis techniques, which do not allow the size and shape of the nanoparticles to be controlled simultaneously, it is a challenge to elucidate the effect of each of these two parameters on antibacterial performance.

Addressing Antimicrobial Properties in Guided Tissue/Bone Regeneration Membrane: Enhancing Effectiveness in Periodontitis Treatment

Guided tissue regeneration (GTR) and guided bone regeneration (GBR) are the two surgical techniques generally used for periodontitis disease treatment. These techniques are based on a barrier membrane to direct the growth of new bone and gingival tissue at sites with insufficient volumes or dimensions of bone or gingiva for proper function, esthetics, or prosthetic restoration. Numerous studies have highlighted biocompatibility, space-creation, cell-blocking, bioactivity, and proper handling as essential characteristics of a membrane's performance. Given that bacterial infection is the primary cause of periodontitis, we strongly believe that addressing the antimicrobial properties of these membranes is of utmost importance. Indeed, the absence of effective inhibition of periodontal pathogens has been recognized as a primary factor contributing to the failure of GTR/GBR membranes. Therefore, we suggest considering antimicrobial properties as one of the key factors in the design of GTR/GBR membranes. Antibiotics are potent medications frequently administered systemically to combat microbes and mitigate bacterial infections. Nevertheless, the excessive use of antibiotics has resulted in a surge in bacterial resistance. To overcome this challenge, alternative antibacterial substances have been developed. In this review, we explore the utilization of alternative substances with antimicrobial properties for topical application in membranes. The use of antibacterial nanoparticles, phytochemical compounds, and antimicrobial peptides in this context was investigated. By carefully selecting and integrating antimicrobial agents into GTR/GBR membranes, we can significantly enhance their effectiveness in combating periodontitis. These antibacterial substances not only act as barriers against pathogenic bacteria but also promote the process of periodontal healing.

Aloe vera assisted green synthesis of Ag and Cu co-doped ZnO nanoparticles and a comprehensive analysis of their structural, morphological, optical, electrical and antibacterial properties

This study investigates the potential of utilizing Aloe vera-assisted green synthesis with transition metal dopants of Ag and Cu for greater efficiency and sustainability in advanced scientific applications utilizing ZnO nanoparticles. Samples were prepared using the co-precipitation method, maintaining a basic pH media of 10. Aloe vera gel extract was chosen for its acclaimed role as a stabilizing and reducing agent and its proven antioxidant, antibacterial, and anticancer properties. The XRD report revealed the hexagonal Wurtzite crystal structure of nanoparticles, exhibiting a crystallite size range of 17-23 nm with substantial alterations in lattice parameters, dislocation density, and bond lengths when dopants were added. Additionally, EDX analysis confirmed the perfect doping of Ag and Cu in ZnO without any impurities. SEM analysis indicated a reduction in agglomeration, accompanied by a transition in particle morphology from columnar to globular. Additionally, the optical study showed a band gap range of 3.18-3.27 eV, confirming it to be a wide band gap semiconductor. The effect of dopants resulted in an increase in transparency and band gap, while a decrease in absorption coefficient in the visible wavelength region. With increasing temperature, a decline in electrical resistivity was noted, with co-doped nanoparticles consistently exhibiting the lowest resistivity, affirming semiconductor characteristics. Most importantly, A remarkable antibacterial efficacy was noticed at low concentrations against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria. The zone of inhibition produced by nanoparticles exhibited values akin to the antibiotic control, even at substantially lower doses. This research offers a comprehensive analysis of the effects of Ag and Cu in Aloe vera-assisted green-synthesized ZnO nanoparticles, concurrently addressing their potential applications in biomedical, energy storage, and optoelectronic devices.

Effects of Synthesis Parameters on Structure and Antimicrobial Properties of Bacterial Cellulose/Hydroxyapatite/TiO2 Polymer-Ceramic Composite Material

Bacterial cellulose (BC) is a highly pure polysaccharide biopolymer that can be produced by various bacterial genera. Even though BC lacks functional properties, its porosity, three-dimensional network, and high specific surface area make it a suitable carrier for functional composite materials. In the present study, BC-producing bacteria were isolated from kombucha beverage and identified using a molecular method. Two sets of the BC hydrogels were produced in static conditions after four and seven days. Afterwards, two different synthesis pathways were applied for BC functionalization. The first method implied the incorporation of previously synthesized HAp/TiO2 nanocomposite using an immersion technique, while the second method included the functionalization of BC during the synthesis of HAp/TiO2 nanocomposite in the reaction mixture. The primary goal was to find the best method to obtain the functionalized material. Physicochemical and microstructural properties were analyzed by SEM, EDS, FTIR, and XRD methods. Further properties were examined by tensile test and thermogravimetric analysis, and antimicrobial activity was assessed by a total plate count assay. The results showed that HAp/TiO2 was successfully incorporated into the produced BC hydrogels using both methods. The applied methods of incorporation influenced the differences in morphology, phase distribution, mechanical and thermal properties, and antimicrobial activity against Staphylococcus aureus (ATCC 25923), Escherichia coli (ATCC 25922), Proteus mirabilis (ATCC 12453), and Candida albicans (ATCC 10231). Composite material can be recommended for further development and application in environments that are suitable for diseases spreading.

Development of environmentally friendly catalyst Ag-ZnO@cellulose acetate derived from discarded cigarette butts for reduction of organic dyes and its antibacterial applications

The release of harmful organic dyes from different industries besides its degradation products is a major contributor to environmental contamination. The catalytic reduction of these organic pollutants using nanocomposites based on polymeric material presents potential advantages for the environment. In this study, novel nanocomposite based on cellulose acetate (CA)-derived from discharged cigarette butts and zinc oxide nanoparticles (ZnO NPs) was prepared utilizing a very simple and low-cost solution blending method and used as support for silver nanoparticles (Ag NPs). A simple reduction method was used to anchor different percentages of Ag NPs on the ZnO@CA nanocomposite surface via utilizing sodium borohydride as a reducing agent. The Ag-ZnO@CA nanocomposite was characterized using X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy. The TEM analysis showed spherical Ag NPs, with an average diameter of ∼17.6 nm, were uniformly anchored on the ZnO@CA nanocomposite surface. The prepared nanocomposites were evaluated as catalysts for the reduction of organic dyes in water. It was found that 10 % Ag-ZnO@CA nanocomposite showed a remarkable reduction of Rhodamine B (RhB), Rhodamine 6G (Rh6G), Methylene Blue (MB), and Sunset Yellow (SY) dyes in short time. In the presence of this nanocomposite, the rate constant, kapp values for RhB, Rh6G, MB, and SY were 0.3498 min-1, 1.51 min-1, 0.2292 min-1, and 0.733 min-1, respectively. This nanocomposite was recovered and reused in five successive cycles, with a negligible loss of its activity. Furthermore, the nanocomposites demonstrated moderate antibacterial activity toward Staphylococcus aureus and Escherichia coli. Thus, this study directed attention on recycling of waste material to a valuable nanocomposite and its applications in environmental protection.

Determining the cytotoxicity of the Minimum Inhibitory Concentration (MIC) of silver and zinc oxide nanoparticles in ESBL and carbapenemase producing Proteus mirabilis isolated from clinical samples in Shiraz, Southwest Iran

OBJECTIVE

Proteus mirabilis is related to serious infections. The present study was designed to investigate the minimum inhibitory concentration (MIC) of silver nanoparticles (AgNPs) and zinc oxide nanoparticles (ZnONPs) and cytotoxicity among P. mirabilis isolates recovered from clinical samples in Shiraz.

RESULTS

A total of 100 P. mirabilis isolates were screened by biochemical tests and polymerase chain reaction (PCR). Also, 25 (25%) and 7 (7%) isolates were positive for extended-spectrum beta-lactamase (ESBLs) and carbapenemase, respectively. Synthesized nanoparticles were characterized by UV-vis spectrum, X-ray diffraction (XRD), and electron microscopy. The average size of AgNPs and ZnONPs in the present study is 48 and < 70 nm, respectively. The MIC and the MBC of the ZnONPs were in the range of 31.25 µg/ml and 62.5 µg/mL, respectively. Also, for AgNPs, the MIC and the MBC were in the range of 7.8 µg/mL and 15.6 µg/mL, respectively. MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay in a primary culture of fibroblast L929 cells for this MIC indicated biocompatibility and low cytotoxicity of Ag NPs and for ZnONPs indicated significant cytotoxicity. Also, a MIC of AgNPs can be used as a therapeutic concentration without the effect of cytotoxicity in human cells.

Fabrication of double layer nanoparticle infused starch-based thermoplastic food packaging system for meat preservation

The current work aims to produce nanoparticle-infused starch-based bioactive thermoplastic packaging films. The FeO and ZnO nanoparticles were examined to be potential active ingredients for the production of nanoparticle-infused bioactive thermoplastic packaging films. The bio-thermoplastic films infused with FeO and ZnO nanoparticles showed high oxygen scavenging and antimicrobial activity, respectively. Consecutively, both films were combined to form a double-layer Nano-Biothermoplastic packaging system for food preservation. The distribution and diffusion of nanoparticles in starch-based films were examined to be influenced by the amorphous character of starch and the swelling index of the film, respectively. The amorphous property of starch molecules showed a masking effect on the crystalline characteristics of nanoparticles in Nano-Biothermoplastic films. The diffusion of nanoparticles from the Nano-Biothermoplastic packaging system was found to influence the microbial, chemical, and color characteristics of mutton and chicken meat stored at 4 °C.

The Interplay of Growth Mechanism and Properties of ZnO Nanostructures for Different Applications

This review provides a background on the structure and properties of ZnO nanostructures. ZnO nanostructures are advantageous for many applications in sensing, photocatalysis, functional textiles, and cosmetic industries, which are described in this review. Previous work using UV Visible (UV-vis) spectroscopy and scanning electron microscopy (SEM) for ZnO nanorod growth analysis in-solution and on a substrate for determination of optical properties and morphology is discussed, as well as their results in determining the kinetics and growth mechanisms. From this literature review, it is understood that the synthesis process greatly affects nanostructures and properties; and hence, their applications. In addition, in this review, the mechanism of ZnO nanostructure growth is unveiled, and it is shown that by having greater control over their morphology and size through such mechanistic understanding, the above-mentioned applications can be affected. The contradictions and gaps in knowledge are summarized in order to highlight the variations in results, followed by suggestions for how to answer these gaps and future outlooks for ZnO nanostructure research.

Metallic Nanoparticles: A Promising Arsenal against Antimicrobial Resistance-Unraveling Mechanisms and Enhancing Medication Efficacy

The misuse of antibiotics and antimycotics accelerates the emergence of antimicrobial resistance, prompting the need for novel strategies to combat this global issue. Metallic nanoparticles have emerged as effective tools for combating various resistant microbes. Numerous studies have highlighted their potential in addressing antibiotic-resistant fungi and bacterial strains. Understanding the mechanisms of action of these nanoparticles, including iron-oxide, gold, zinc oxide, and silver is a central focus of research within the life science community. Various hypotheses have been proposed regarding how nanoparticles exert their effects. Some suggest direct targeting of microbial cell membranes, while others emphasize the release of ions from nanoparticles. The most compelling proposed antimicrobial mechanism of nanoparticles involves oxidative damage caused by nanoparticles-generated reactive oxygen species. This review aims to consolidate knowledge, discuss the properties and mechanisms of action of metallic nanoparticles, and underscore their potential as alternatives to enhance the efficacy of existing medications against infections caused by antimicrobial-resistant pathogens.

Influence of Synthesis Conditions on the Properties of Zinc Oxide Obtained in the Presence of Nonionic Structure-Forming Compounds

This work investigated the influence of synthesis conditions, including the use of nonionic structure-forming compounds (surfactants) with different molecular weights (400-12,600 g/mol) and various hydrophilic/hydrophobic characteristics, as well as the use of a glass substrate and hydrothermal exposure on the texture and structural properties of ZnO samples. By X-ray analysis, it was determined that the synthesis intermediate in all cases is the compound Zn5(OH)8(NO3)2∙2H2O. It was shown that thermolysis of this compound at 600 °C, regardless of the physicochemical properties of the surfactants, leads to the formation of ZnO with a wurtzite structure and spherical or oval particles. The particle size increased slightly as the molecular weight and viscosity of the surfactants grew, from 30 nm using Pluronic F-127 (MM = 12,600) to 80 nm using Pluronic L-31 (MM = 1100), PE-block-PEG (MM = 500) and PEG (MM = 400). Holding the pre-washed synthetic intermediates (Zn5(OH)8(NO3)2∙2H2O) under hydrothermal conditions resulted in the formation of hexagonal ZnO rod crystal structures of various sizes. It was shown that the largest ZnO particles (10-15 μm) were observed in a sample obtained during hydrothermal exposure using Pluronic P-123 (MM = 5800). Atomic adsorption spectroscopy performed comparative quantitative analysis of residual Zn2+ ions in the supernatant of ZnO samples with different particle sizes and shapes. It was shown that the residual amount of Zn2+ ions was higher in the case of examining ZnO samples which have spherical particles of 30-80 nm. For example, in the supernatant of a ZnO sample that had a particle size of 30 nm, the quantitative content of Zn2+ ions was 10.22 mg/L.

Sustainable bioactivity enhancement of ZnO-Ag nanoparticles in antimicrobial, antibiofilm, lung cancer, and photocatalytic applications

Cancer, microbial infections, and water pollution are significant challenges the modern human population faces. Traditional treatments for cancer and infections often have adverse effects and ecological consequences, while chemical methods for water decontamination can produce harmful byproducts. Metal nanoparticles, particularly zinc oxide (ZnO) and silver (Ag) nanoparticles, show promise in addressing these issues. However, doping Ag on ZnO NPs may synergistically enhance biomedical and therapeutic effects with fewer adverse consequences and improved photocatalytic properties for wastewater treatment. This study aimed to create ZnO and ZnO-Ag nanoparticles through green synthesis and compare their anticancer, antimicrobial, and photocatalytic activity mechanisms. XRD studies determined the crystal diameters of ZnO NPs and ZnO-Ag NPs to be 12.8 nm and 15.7 nm, respectively, with a hexagonal wurtzite structure. The XPS and EDS analyses confirmed the presence of Ag on the ZnO NPs. ZnO NPs and ZnO-Ag NPs exhibited low aggregation in aqueous suspensions, with zeta potentials of -20.5 mV and -22.7 mV, respectively. Evaluating antimicrobial and antibiofilm activity demonstrates that ZnO-Ag NPs have superior potential to ZnO NPs and standard antibiotic drugs against E. coli, S. typhi, B. subtilis, S. aureus, C. albicans, and A. niger. The results of the in vitro cytotoxicity test indicated that on the NCI-H460 lung cancer cell line, ZnO NPs and ZnO-Ag NPs demonstrated IC50 values of 40 μg mL-1 and 30 μg mL-1, respectively. The photocatalytic degradation of methylene blue under direct sunlight revealed that ZnO and ZnO-Ag NPs degraded MB by 98% and 70% in 105 min, respectively. These results show that these nanomaterials may have great potential for treating the aforementioned issues.

Nanoparticles-based therapeutics for the management of bacterial infections: A special emphasis on FDA approved products and clinical trials

Microbial resistance has increased in recent decades as a result of the extensive and indiscriminate use of antibiotics. The World Health Organization listed antimicrobial resistance as one of ten major global public health threats in 2021. In particular, six major bacterial pathogens, including third-generation cephalosporin-resistant Escherichia coli, methicillin-resistant Staphylococcus aureus, carbapenem-resistant Acinetobacter baumannii, Klebsiella pneumoniae, Streptococcus pneumoniae, and Pseudomonas aeruginosa, were found to have the highest resistance-related death rates in 2019. To respond to this urgent call, the creation of new pharmaceutical technologies based on nanoscience and drug delivery systems appears to be the promising strategy against microbial resistance in light of recent advancements, particularly the new knowledge of medicinal biology. Nanomaterials are often defined as substances having sizes between 1 and 100 nm. If the material is used on a small scale; its properties significantly change. They come in a variety of sizes and forms to help provide distinguishing characteristics for a wide range of functions. The field of health sciences has demonstrated a strong interest in numerous nanotechnology applications. Therefore, in this review, prospective nanotechnology-based therapeutics for the management of bacterial infections with multiple medication resistance are critically examined. Recent developments in these innovative treatment techniques are described, with an emphasis on preclinical, clinical, and combinatorial approaches.

Electrodeposited Zinc Coatings for Biomedical Application: Morphology, Corrosion and Biological Behaviour

The improvement of biodegradable metals is currently an active and promising research area for their capabilities in implant manufacturing. However, controlling their degradation rate once their surface is in contact with the physiological media is a challenge. Surface treatments are in the way of addressing the improvement of this control. Zinc is a biocompatible metal present in the human body as well as a metal widely used in coatings to prevent corrosion, due to its well-known metal protective action. These two outstanding characteristics make zinc coating worthy of consideration to improve the degradation behaviour of implants. Electrodeposition is one of the most practical and common technologies to create protective zinc coatings on metals. This article aims to review the effect of the different parameters involved in the electrochemical process on the topography and corrosion characteristics of the zinc coating. However, certainly, it also provides an actual and comprehensive description of the state-of-the-art of the use of electrodeposited zinc for biomedical applications, focusing on their capacity to protect against bacterial colonization and to allow cell adhesion and proliferation.

Biocompatible Gallium Nanodots against Drug-Resistant Bacterial Pneumonia and Liver Abscess

Resistant bacterial infection remains a severe public health threat, and conventional antibiotic drugs work poorly in effectively treating infectious diseases. Here, we developed gallium-based nanodots (Ga NDs), consisting of specific disruption of bacterial iron ability, to treat multidrug-resistant (MDR) Gram-negative bacteria-infected diseases. The Ga NDs significantly suppress the proliferation of two typical MDR bacteria strains (P. aeruginosa and ESBL E. coli) compared with clinically used antibacterial drugs, including penicillin and levofloxacin. Ga NDs could also disrupt the biofilms of these two bacterial strains. In P. aeruginosa infected pneumonia and ESBL E. coli infected acute liver abscess models, the Ga NDs enable substantial inhibition of bacterial growth and reduce the organs' inflammation that resulted in significant improvement of survival. Further, the Ga NDs demonstrated excellent biocompatibility and biosafety characteristics. Together, we believe that our gallium containing nanotherapeutics are expected to be developed into promising alternative therapies to combat drug-resistant bacterial infection.

Antibacterial Effect of Low-Concentration ZnO Nanoparticles on Sulfate-Reducing Bacteria under Visible Light

The effect of ZnO nanoparticles (ZnO NPs), with different concentrations in simulated water, on the activity of sulfate-reducing bacteria (SRB) and their adhesion behaviour on stainless-steel surfaces, with and without visible light treatment, were investigated. The results showed that the concentration of ZnO NPs and light treatment greatly influenced the antibacterial performance of the NPs. In the water solution without light treatment, the low concentration (no more than 1 mg/L) of ZnO NPs in the aqueous solution promoted the growth of SRB, and the amount of biofilm attached to the stainless-steel surface increased. As the concentration increased, ZnO NPs exhibited antibacterial effects. In water under visible light irradiation, ZnO NPs showed antibacterial performance at all the concentrations studied (0.5~50 mg/L), and the antibacterial efficiency increased with the increase in the concentration of NPs. The determination results of the reactive oxygen species showed that light treatment can stimulate ZnO NPs in water to generate ·OH and O₂^·-, which exhibited good antibacterial properties. The adhesion amount of SRB on the stainless-steel surface was inversely proportional to the antibacterial efficiency of ZnO NPs.

Photodynamic chitosan sponges with dual instant and enduring bactericidal potency for treating skin abscesses

The emergence of multidrug-resistant (MDR) bacteria has made wound infection treatment difficult, calling for novel strategies for effective elimination of bacteria in wounds and promoting their recovery. Herein, we report a novel chitosan antibacterial sponge combining zinc oxide particles (ZnO) and the photosensitizer chlorin e6 (Ce6), named CS-ZnO/Ce6 sponge for combating multidrug-resistant bacteria and treating skin abscesses. The fabricated CS-ZnO/Ce6 sponge had porous structure with high porosity, conducive to absorbing the wound exudate. Meanwhile, the hemostatic property of this sponge enabled it to stop the continuous bleeding of the wound. Upon 660 nm light irradiation, the CS-ZnO/Ce6 sponge exhibited an instant photodynamic bactericidal effect against several typical MDR strains, and the presence of ZnO could continuously inhibit bacterial growth. In addition, local remedy of methicillin-resistant Staphylococcus aureus (MRSA)-infected mice with CS-ZnO/Ce6 sponge with light irradiation caused a potent immediate bacterial killing effect and prolonged bacteriostasis in mice with skin abscesses, leading to the rapid recovery of the wound. The biocompatibility of the CS-ZnO/Ce6 sponge in mice was also verified by histological examination of the main organs. Collectively, the CS-ZnO/Ce6 sponge with broad-spectrum antibacterial activity and long-term bacterial inhibition potential could be useful for treating microbial infections and accelerating wound healing.

The Antibacterial Effect of Ciprofloxacin Loaded Calcium Carbonate (CaCO3) Nanoparticles Against the Common Bacterial Agents of Osteomyelitis

The present study aimed to investigate the biocompatibility, antibacterial/anti-biofilm effects of ciprofloxacin-loaded calcium carbonate (Cip- loaded CaCO₃) nanoparticles against the common organisms responsible for osteomyelitis. The antibacterial and biofilm inhibitory activities were studied by determination of minimum inhibitory concentrations (MICs) and minimum biofilm inhibitory concentrations (MBICs), respectively. Hemolytic effects were determined for studying hemocompatibility. The SDS-PAGE method was used to study the interaction of Cip- loaded CaCO₃ with plasma proteins. The effects of Cip- loaded CaCO₃ on the cell viability of human bone marrow mesenchymal stem cells (hBM-MSCs) was detected. The Cip- loaded CaCO₃ nanoparticles were shown a significant antimicrobial effect at lower concentrations than free ciprofloxacin. No significant hemolytic effect was observed. The Cip- loaded CaCO₃ nanoparticles have shown interaction with apolipoprotein A1 (28 kDa) and albumin (66.5 kDa). The viability of hBM-MSCs treated with Cip- loaded CaCO₃ was more than 96%. Our results indicated that Cip-loaded CaCO₃ nanoparticles had favorable in vitro compatibility with human red blood cells, antimicrobial effects, and low cytotoxicity.

High performance biopolymeric packaging films containing zinc oxide nanoparticles for fresh food preservation: A review

Biodegradable food packaging films (FPFs) assembled from sustainable biopolymeric materials are of increasing interest to the food industry due to pollution and health risks resulting from the use of conventional plastic packaging. However, the functional performance of these FPFs is often poorer than that of plastic films, which limits their commercial application. This problem may be partly overcome by incorporating nano-additives like zinc oxide nanoparticles (ZNPs) into the films. The incorporation of ZNPs into FPFs can improve their functional performance. The properties of these films depends on the concentration, dispersion state, and interactions of ZNPs with the biopolymeric matrix in the films. ZNPs-loaded films and coatings are highly effective at preserving a variety of fresh foods. Studies of ZNPs migration through FPFs have shown that the zinc is mainly transported in an ionic form and the amount entering foods is below safety standards. This article reviews recent developments in the design, fabrication, and application of ZNPs-loaded FPFs based on biopolymers, focusing on the impacts of ZNPs on the optical, barrier, mechanical, water sensitivity, and antimicrobial properties of the films. The potential applications of ZNPs-loaded FPFs for fresh food preservation is also discussed.

Phytofabrication and Characterisation of Zinc Oxide Nanoparticles Using Pure Curcumin

Zinc oxide and curcumin, on their own and in combination, have the potential as alternatives to conventional anticancer drugs. In this work, zinc oxide nanoparticles (ZnO NPs) were prepared by an eco-friendly method using pure curcumin, and their physicochemical properties were characterised. ATR-FTIR spectra confirmed the role of curcumin in synthesising zinc oxide curcumin nanoparticles (Green-ZnO-NPs). These nanoparticles exhibited a hexagonal wurtzite structure with a size and zeta potential of 27.61 ± 5.18 nm and -16.90 ± 0.26 mV, respectively. Green-ZnO-NPs showed good activity towards studied bacterial strains, including Escherichia coli, Staphylococcus aureus and methicillin-resistant Staphylococcus aureus. The minimum inhibitory concentration of Green-ZnO-NPs was consistently larger than that of chemically synthesised ZnO NPs (Std-ZnO-NPs) or mere curcumin, advocating an additive effect between the zinc oxide and curcumin. Green-ZnO-NPs demonstrated an efficient inhibitory effect towards MCF-7 cells with IC50 (20.53 ± 5.12 μg/mL) that was significantly lower compared to that of Std-ZnO-NPs (27.08 ± 0.91 μg/mL) after 48 h of treatment. When Green-ZnO-NPs were tested against Artemia larvae, a minimised cytotoxic effect was observed, with LC50 being almost three times lower compared to that of Std-ZnO-NPs (11.96 ± 1.89 μg/mL and 34.60 ± 9.45 μg/mL, respectively). This demonstrates that Green-ZnO-NPs can be a potent, additively enhanced combination delivery/therapeutic agent with the potential for anticancer therapy.

Mechanochemical Synthesis of Nanoparticles for Potential Antimicrobial Applications

There is an increased interest in porous materials due to their unique properties such as high surface area, enhanced catalytic properties, and biological applications. Various solvent-based approaches have been already used to synthesize porous materials. However, the use of large volume of solvents, their toxicity, and time-consuming synthesis make this process less effective, at least in terms of principles of green chemistry. Mechanochemical synthesis is one of the effective eco-friendly alternatives to the conventional synthesis. It adopts the efficient mixing of reactants using ball milling without or with a very small volume of solvents, gives smaller size nanoparticles (NPs) and larger surface area, and facilitates their functionalization, which is highly beneficial for antimicrobial applications. A large variety of nanomaterials for different applications have already been synthesized by this method. This review emphasizes the comparison between the solvent-based and mechanochemical methods for the synthesis of mainly inorganic NPs for potential antimicrobial applications, although some metal-organic framework NPs are briefly presented too.

Phyto-Mediated Controllable Synthesis of ZnO Clusters with Bactericidal Activity

The rapid development of antibiotic resistance has been considered a major threat to public health. Nanomaterials have risen to be an effective weapon to tackle this problem through multiple antibacterial mechanisms. The improved and tailored physiochemical properties of fine-tuned secondary nanoarchitectures contribute to the superior bactericidal actions of metal oxide structures. However, it is still challenging to construct secondary structures through mild green manufacturing methods. Here, we report the preferred antibacterial ZnO nanocrystal clusters formed by a green structure-tuning synthesis process, in which the primary ZnO nanoparticles with sizes <10 nm were assembled into different forms of clusters depending on the zinc salt concentration and temperature. ZnO clusters with a stable loose-assembly structure and a rougher surface exhibited better bactericidal ability with minimal inhibitory concentrations of 0.5 and 0.1 mg/mL against Escherichia coli and Staphylococcus aureus, respectively. The underlying mechanism is related to enhancing contact with bacteria, releasing small ZnO nanoparticles, and generating additional reactive oxygen species, which could aggravate the damage to bacterial cell membrane and eventually lead to bacterial death. Furthermore, attachment of phenolic compounds from olive leaf extract would promote membrane penetration by ZnO nanoparticles, resulting in the improvement of antibacterial activities, which profit from the green route mediated by Olea europaea leaf extract that could structure-tune ZnO nanocrystal clusters in one simple step that retains the active ingredients on the nanoparticles. This work proposes a feasible and clean strategy to improve the structure-bioactivity relationship of ZnO by controlling its growth into a preferable structure, and the developed ZnO clusters have a good prospect in antibacterial applications because of their excellent performance and green fabrication method.

Nanomaterials to address the genesis of antibiotic resistance in Escherichia coli

Escherichia is a genus of prokaryotic gram-negative bacteria which forms a vital component of the gut microbiota of homeotherms including humans. Many members of this genus are commensals and pathogenic strains, which are responsible for some of the most common bacterial infections and can be fatal, particularly in the case of newborns and children. The fecal matter in wastewater treatment plants serves as major environmental sinks for the accumulation of Escherichia. The rise in antibiotic pollution and the lateral gene exchange of antibiotic-resistant genes have created antibiotic-resistant Escherichia strains that are often called superbugs. Antibiotic resistance has reached a crisis level that nowadays existing antibiotics are no longer effective. One way of tackling this emerging concern is by using nanomaterials. Punitively, nanomaterials can be used by conjugating with antibodies, biomolecules, and peptides to reduce antibiotic usage, whereas, preventatively, they can be used as either nano-antimicrobial additives or nano-photocatalytic sheets to reduce the microbial population and target the superbugs of environmental Escherichia. In this review, we have explored the threat posed by pathogenic Escherichia strains in the environment, especially in the context of antibiotic-resistant strains. Along with this, we have discussed some nanomaterial-mediated strategies in which the problem can be addressed by using nanomaterials as nanophotocatalytics, antimicrobial additives, drugs, and drug conjugates. This review also presents a brief overview of the ecological threats posed by the overuse of nanomaterials which warrants a balanced and judicious approach to the problem.

Stimuli-Activable Metal-Bearing Nanomaterials and Precise On-Demand Antibacterial Strategies

Bacterial infections remain the leading cause of death worldwide today. The emergence of antibiotic resistance has urged the development of alternative antibacterial technologies to complement or replace traditional antibiotic treatments. In this regard, metal nanomaterials have attracted great attention for their controllable antibacterial functions that are less prone to resistance. This review discusses a particular family of stimuli-activable metal-bearing nanomaterials (denoted as SAMNs) and the associated on-demand antibacterial strategies. The various SAMN-enabled antibacterial strategies stem from basic light and magnet activation, with the addition of bacterial microenvironment responsiveness and/or bacteria-targeting selectivity and therefore offer higher spatiotemporal controllability. The discussion focuses on nanomaterial design principles, antibacterial mechanisms, and antibacterial performance, as well as emerging applications that desire on-demand and selective activation (i.e., medical antibacterial treatments, surface anti-biofilm, water disinfection, and wearable antibacterial materials). The review concludes with the authors' perspectives on the challenges and future directions for developing industrial translatable next-generation antibacterial strategies.

Morphologic design of nanostructures for enhanced antimicrobial activity

Despite significant progress in synthetic polymer chemistry and in control over tuning the structures and morphologies of nanoparticles, studies on morphologic design of nanomaterials for the purpose of optimizing antimicrobial activity have yielded mixed results. When designing antimicrobial materials, it is important to consider two distinctly different modes and mechanisms of activity-those that involve direct interactions with bacterial cells, and those that promote the entry of nanomaterials into infected host cells to gain access to intracellular pathogens. Antibacterial activity of nanoparticles may involve direct interactions with organisms and/or release of antibacterial cargo, and these activities depend on attractive interactions and contact areas between particles and bacterial or host cell surfaces, local curvature and dynamics of the particles, all of which are functions of nanoparticle shape. Bacteria may exist as spheres, rods, helices, or even in uncommon shapes (e.g., box- and star-shaped) and, furthermore, may transform into other morphologies along their lifespan. For bacteria that invade host cells, multivalent interactions are involved and are dependent upon bacterial size and shape. Therefore, mimicking bacterial shapes has been hypothesized to impact intracellular delivery of antimicrobial nanostructures. Indeed, designing complementarities between the shapes of microorganisms with nanoparticle platforms that are designed for antimicrobial delivery offers interesting new perspectives toward future nanomedicines. Some studies have reported improved antimicrobial activities with spherical shapes compared to non-spherical constructs, whereas other studies have reported higher activity for non-spherical structures (e.g., rod, discoid, cylinder, etc.). The shapes of nano- and microparticles have also been shown to impact their rates and extents of uptake by mammalian cells (macrophages, epithelial cells, and others). However, in most of these studies, nanoparticle morphology was not intentionally designed to mimic specific bacterial shape. Herein, the morphologic designs of nanoparticles that possess antimicrobial activities per se and those designed to deliver antimicrobial agent cargoes are reviewed. Furthermore, hypotheses beyond shape dependence and additional factors that help to explain apparent discrepancies among studies are highlighted.

Green synthesis of zinc oxide nanoparticles toward highly efficient photocatalysis and antibacterial application

Zinc oxide nanoparticles (ZnO NPs) were successfully synthesized by a green method using rosin and zinc chloride as salt precursors. The phase structure, morphology, and particle size of ZnO were determined by X-ray powder diffraction, field emission scanning electron microscopy, and high-resolution transmission electron microscopy. The fabricated ZnO NP samples are crystalline with a grain size of 30-100 nm. The ZnO NPs were used as catalysts for the photodegradation of methylene blue (MB) and methyl orange (MO) under visible and UV light. The results indicate that the prepared ZnO material excellently removed MB and MO (c _initial = 10 mg/L) with efficiencies of 100% and 82.78%, respectively, after 210 min under UV radiation with a ZnO NP dose of 2 g/L. The photocatalyst activity of the synthesized material was also tested under visible light radiation with the same conditions; however, it achieved lower efficiencies. In addition, ZnO NPs were also tested regarding their antibacterial activity, and the results showed that the prepared ZnO samples had the highest (i.e., 100%) antibacterial efficiency against E. coli.