One step green synthesis of larvicidal, and azo dye degrading antibacterial nanoparticles by response surface methodology

Carbon-Dots-Mediated Improvement of Antimicrobial Activity of Natural Products

The development of new microbicidal compounds has become a top priority due to the emergence and spread of drug-resistant pathogenic microbes. In this study, blue-emitting and positively charged carbon dots (CDs), called Du-CDs, were fabricated for the first time utilizing the natural product extract of endophyte Diaporthe unshiuensis YSP3 as raw material through a one-step solvothermal method, which possessed varied functional groups including amino, carboxyl, hydroxyl, and sulfite groups. Interestingly, Du-CDs exhibited notably enhanced antimicrobial activities toward both bacteria and fungi as compared to the natural product extract of YSP3, with low minimum inhibitory concentrations. Moreover, Du-CDs significantly inhibited the formation of biofilms. Du-CDs bound with the microbial cell surface via electronic interaction or hydrophobic interaction entered the microbial cells and were distributed fully inside the cells. Du-CDs caused cell membrane damage and/or cell division cycle interruption, resulting in microbial cell death. Moreover, Du-CDs exhibited an improved antimicrobial effect and accelerated wound healing ability with good biocompatibility in the mouse model. Overall, we demonstrate that the formation of CDs from fungal natural products presents a promising and potential means to develop novel antimicrobial agents with great fluorescence, improved microbiocidal effect and wound healing capacity, and good biosafety for combating microbial infections.

Synthesis, characterisation and in vitro anticancer activity of conjugated protease inhibitor-silver nanoparticles (AgNPs-PI) against human breast MCF-7 and prostate PC-3 cancer cell lines

The conjugated silver nanoparticles using biomolecules have attracted great attention of researchers because physical dimensions and surface chemistry play important roles in toxicity and biocompatibility of AgNPs. Hence, in the current study, synthesis of bio-conjugated AgNPs with protein protease inhibitor (PI) isolated from Streptomyces spp. is reported. UV-visible spectra of PI and AgNPs showed stronger peaks at 280 and 405 nm, confirming the synthesis of conjugated AgNPs-PI. TEM and SEM images of AgNPs-PI showed spherical-shaped nanoparticles with a slight increase in particle size and thin amorphous layer around the surface of silver nanomaterial. Circular dichroism, FT-IR and fluorescence spectral studies confirmed AgNPs-PI conjugation. Conjugated AgNPs-PI showed excellent anticancer potential than AgNPs and protease inhibitor separately on human breast MCF-7 and prostate PC-3 cell lines. The findings revealed that surface modification of AgNPs with protein protease inhibitor stabilised the nanomaterial and increased its anticancer activity.

Sustainable use of plastic-derived nanocarbons as a promising larvicidal and growth inhibitor agent towards control of mosquitoes

Nanoscale carbon was obtained from six widely used plastics (PET, HDPE, PVC, LDPE, PP and PP) via thermal degradation (600 °C) under inert atmosphere. The thermally degraded products were processed through bath sonication followed by lyophilisation and the same was characterized through proximate analysis, UV-Vis spectroscopy, Scanning electron micrograph (SEM) with energy dispersive X-ray (EDX) analysis, Transmission electron micrograph (TEM), Dynamic light scattering (DLS) and Fourier transform infrared spectroscopy (FTIR). A series of aqueous solution of nanoscale carbon (5-30 mg/L) were prepared and same were used as both mosquito growth inhibitor and larvicidal agent against 3rd and 4th instar larvae of Culex pipiens. The significant percent mortality results were recorded for LDPE (p < 0.007) with average particle size of 3.01 nm and 62.95 W% of carbon and PS (p < 0.002) with average particle size of 12.80 nm and 58.73 W% of carbon against 3rd instar larvae, respectively. Similarly, for 4th instar larvae, both significant pupicidal and adulticidal activity were also recorded for PET (F = 24.0, p < 0.0001 and F = 5.73, p < 0.006), and HDPE (F = 26.0, p < 0.0001) and F = 5.30, p < 0.008). However, significant pupicidal activity were observed for PVC (F = 6.90, p < 0.003), and PS (F = 21.30, p < 0.0001). Histological, bio-chemical and microscopic studies were revealed that nanoscale carbon causes mild to severe damage of external and internal cellular integrity of larvae. However, nanoscale carbon does not exhibit any chromosomal abnormality and anatomical irregularities in Allium cepa and Cicer arietinum, respectively. Similarly, non-significant results with respect to blood cell deformation were also recorded from blood smear of Poecilia reticulata. Therefore, it can be concluded that plastic origin nanoscale carbon could be a viable sustainable nano-weapon towards control of insects.

Manganese Nanoparticles: Synthesis, Mechanisms of Influence on Plant Resistance to Stress, and Prospects for Application in Agricultural Chemistry

Manganese (Mn) is an important microelement for the mineral nutrition of plants, but it is not effectively absorbed from the soil and mineral salts added thereto and can also be toxic in high concentrations. Mn nanoparticles (NPs) are less toxic, more effective, and economical than Mn salts due to their nanosize. This article critically reviews the current publications on Mn NPs, focusing on their effects on plant health, growth, and stress tolerance, and explaining possible mechanisms of their effects. This review also provides basic information and examples of chemical, physical, and ecological ("green") methods for the synthesis of Mn NPs. It has been shown that the protective effect of Mn NPs is associated with their antioxidant activity, activation of systemic acquired resistance (SAR), and pronounced antimicrobial activity against phytopathogens. In conclusion, Mn NPs are promising agents for agriculture, but their effects on gene expression and plant microbiome require further research.

Iron Oxide Nanoparticles: Green Synthesis and Their Antimicrobial Activity

The rise of antimicrobial resistance caused by inappropriate use of these agents in various settings has become a global health threat. Nanotechnology offers the potential for the synthesis of nanoparticles (NPs) with antimicrobial activity, such as iron oxide nanoparticles (IONPs). The use of IONPs is a promising way to overcome antimicrobial resistance or pathogenicity because of their ability to interact with several biological molecules and to inhibit microbial growth. In this review, we outline the pivotal findings over the past decade concerning methods for the green synthesis of IONPs using bacteria, fungi, plants, and organic waste. Subsequently, we delve into the primary challenges encountered in green synthesis utilizing diverse organisms and organic materials. Furthermore, we compile the most common methods employed for the characterization of these IONPs. To conclude, we highlight the applications of these IONPs as promising antibacterial, antifungal, antiparasitic, and antiviral agents.

A Novel Finding: 2,4-Di-tert-butylphenol from Streptomyces bacillaris ANS2 Effective Against Mycobacterium tuberculosis and Cancer Cell Lines

The aim of the present study is to identify actinobacteria Streptomyces bacillaris ANS2 as the source of the potentially beneficial compound 2,4-di-tert-butylphenol, describe its chemical components, and assess its anti-tubercular (TB) and anti-cancer properties. Ethyl acetate was used in the agar surface fermentation of S. bacillaris ANS2 to produce the bioactive metabolites. Using various chromatographic and spectroscopy analyses, the potential bioactive metabolite separated and identified as 2,4-di-tert-butylphenol (2,4-DTBP). The lead compound 2,4-DTBP inhibited 78% and 74% of relative light unit (RLU) decrease against MDR Mycobacterium tuberculosis at 100ug/ml and 50ug/ml concentrations, respectively. The Wayne model was used to assess the latent/dormant potential in M. tuberculosis H37RV at various doses, and the MIC for the isolated molecule was found to be 100ug/ml. Furthermore, the molecular docking of 2,4-DTBP was docked using Autodock Vinasuite onto the substrate binding site of the target Mycobacterium lysine aminotransferase (LAT) and the grid box was configured for the docking run to cover the whole LAT dimer interface. At a dosage of 1 mg/ml, the anti-cancer activity of the compound 2,4-DTBP was 88% and 89% inhibited against the HT 29 (colon cancer) and HeLa (cervical cancer) cell lines. According to our literature survey, this present finding may be the first report on anti-TB activity of 2,4-DTBP and has the potential to become an effective natural source and the promising pharmaceutical drug in the future.

Flavonoid-Loaded Biomaterials in Bone Defect Repair

Skeletons play an important role in the human body, and can form gaps of varying sizes once damaged. Bone defect healing involves a series of complex physiological processes and requires ideal bone defect implants to accelerate bone defect healing. Traditional grafts are often accompanied by issues such as insufficient donors and disease transmission, while some bone defect implants are made of natural and synthetic polymers, which have characteristics such as good porosity, mechanical properties, high drug loading efficiency, biocompatibility and biodegradability. However, their antibacterial, antioxidant, anti-inflammatory and bone repair promoting abilities are limited. Flavonoids are natural compounds with various biological activities, such as antitumor, anti-inflammatory and analgesic. Their good anti-inflammatory, antibacterial and antioxidant activities make them beneficial for the treatment of bone defects. Several researchers have designed different types of flavonoid-loaded polymer implants for bone defects. These implants have good biocompatibility, and they can effectively promote the expression of angiogenesis factors such as VEGF and CD31, promote angiogenesis, regulate signaling pathways such as Wnt, p38, AKT, Erk and increase the levels of osteogenesis-related factors such as Runx-2, OCN, OPN significantly to accelerate the process of bone defect healing. This article reviews the effectiveness and mechanism of biomaterials loaded with flavonoids in the treatment of bone defects. Flavonoid-loaded biomaterials can effectively promote bone defect repair, but we still need to improve the overall performance of flavonoid-loaded bone repair biomaterials to improve the bioavailability of flavonoids and provide more possibilities for bone defect repair.

Advances in Phytonanotechnology: A Plant-Mediated Green Synthesis of Metal Nanoparticles Using Phyllanthus Plant Extracts and Their Antimicrobial and Anticancer Applications

Nanoparticles and nanotechnology developments continue to advance the livelihood of humankind. However, health challenges due to microorganisms and cancerous cells continue to threaten many people's lives globally. Therefore, new technological interventions are of great importance. The phytochemicals present in medicinal plants are suggested as biocompatible, cost-effective, and regenerative sources that can be utilized for the green synthesis of nanoparticles. Different plant extracts with various phytochemical constituents can form nanoparticles with specific shapes, sizes, and optical properties. This review focuses on advances in green nanotechnology and provides details on reliable synthetic routes toward medically and biocompatible relevant metallic nanoparticles. We cover a wide range of applications that use phytonanoparticles with an in-depth look at what makes these materials interesting. The study also provides details of the literature on the interventions made in phytonanotechnology for the production of plant-mediated synthesis and capped metallic nanoparticles and their applications in various industries. It was observed that a variety of plants have been well studied, and detailed findings have been reported; however, the study of Phyllanthus is still in its early stages, and more needs to be uncovered.

Research progress in green synthesis of manganese and manganese oxide nanoparticles in biomedical and environmental applications - A review

Nanomaterials and nanotechnology have this unassailable position for environmental remediation and medicine. Currently, global environmental pollution and public health problems are increasing and need to be urgently addressed. Manganese (Mn) is one of the essential metal elements for plants and animals, it is necessary to integrate with nanotechnology. Mn and Mn oxide (MnO) nanoparticles (NPs) have applications in dye degradation, biomedicine, electrochemical sensors, plant and animal growth, and catalysis. However, the current research is limited, especially in terms of optimal synthesis of Mn and MnO NPs, separation, purification conditions, and the development of potential application areas is too basic and do not support by in-depth studies. Hence, this review comprehensively discusses the classification, green synthesis methods, and applications of Mn and MnO NPs in biomedical, environmental, and other fields and gives a perspective for the future.

Bacteriophage-mediated biosynthesis of MnO2NPs and MgONPs and their role in the protection of plants from bacterial pathogens

Introduction

Xanthomonas oryzae pv. oryzae (Xoo) is the plant pathogen of Bacterial Leaf Blight (BLB), which causes yield loss in rice.

Methods

In this study, the lysate of Xoo bacteriophage X3 was used to mediate the bio-synthesis of MgO and MnO₂. The physiochemical features of MgONPs and MnO₂NPs were observed via Ultraviolet - Visible spectroscopy (UV-Vis), X-ray diffraction (XRD), Transmission/Scanning electron microscopy (TEM/SEM), Energy dispersive spectrum (EDS), and Fourier-transform infrared spectrum (FTIR). The impact of nanoparticles on plant growth and bacterial leaf blight disease were evaluated. Chlorophyll fluorescence was used to determine whether the nanoparticles application were toxic to the plants.

Results

An absorption peak of 215 and 230 nm for MgO and MnO₂, respectively, confirmed nanoparticle formation via UV-Vis. The crystalline nature of the nanoparticles was detected by the analysis of XRD. Bacteriological tests indicated that MgONPs and MnO₂NPs sized 12.5 and 9.8 nm, respectively, had strong in vitro antibacterial effects on rice bacterial blight pathogen, Xoo. MnO₂NPs were found to have the most significant antagonist effect on nutrient agar plates, while MgONPs had the most significant impact on bacterial growth in nutrient broth and on cellular efflux. Furthermore, no toxicity to plants was observed for MgONPs and MnO₂NPs, indeed, MgONPs at 200 μg/mL significantly increased the quantum efficiency of PSII photochemistry on the model plant, Arabidopsis, in light (ΦPSII) compared to other interactions. Additionally, significant suppression of BLB was noted in rice seedlings amended with the synthesized MgONPs and MnO₂NPs. MnO₂NPs showed promotion of plant growth in the presence of Xoo compared to MgONPs.

Conclusion

An effective alternative for the biological production of MgONPs and MnO₂NPs was reported, which serves as an effective substitute to control plant bacterial disease with no phytotoxic effect.

Mosquito-Borne Diseases and Their Control Strategies: An Overview Focused on Green Synthesized Plant-Based Metallic Nanoparticles

Mosquitoes act as vectors of pathogens that cause most life-threatening diseases, such as malaria, Dengue, Chikungunya, Yellow fever, Zika, West Nile, Lymphatic filariasis, etc. To reduce the transmission of these mosquito-borne diseases in humans, several chemical, biological, mechanical, and pharmaceutical methods of control are used. However, these different strategies are facing important and timely challenges that include the rapid spread of highly invasive mosquitoes worldwide, the development of resistance in several mosquito species, and the recent outbreaks of novel arthropod-borne viruses (e.g., Dengue, Rift Valley fever, tick-borne encephalitis, West Nile, yellow fever, etc.). Therefore, the development of novel and effective methods of control is urgently needed to manage mosquito vectors. Adapting the principles of nanobiotechnology to mosquito vector control is one of the current approaches. As a single-step, eco-friendly, and biodegradable method that does not require the use of toxic chemicals, the green synthesis of nanoparticles using active toxic agents from plant extracts available since ancient times exhibits antagonistic responses and broad-spectrum target-specific activities against different species of vector mosquitoes. In this article, the current state of knowledge on the different mosquito control strategies in general, and on repellent and mosquitocidal plant-mediated synthesis of nanoparticles in particular, has been reviewed. By doing so, this review may open new doors for research on mosquito-borne diseases.

Process analysis of asymmetric interaction between copper and atrazine in a system of macrophytes

To clarify the mutual influence and inner processes between heavy-metal and pesticide pollutants, single copper and atrazine as well as binary mixtures were spiked in a system of aquatic Acorus tatarinowi Schott. The results show that: the total copper amount in roots was 23.31 and 41.46 times as much as those in leaves in single and co-contaminated copper pollution. In the solution, the copper removal reached equilibrium in 3 days. Atrazine raised plant-mediated copper removal by 20.69 % by calculating mass balance, and the increase in pH value and organic matter and the decrease of nitrate in solutions were key factors driving it. Correlation analysis demonstrated that the pH increase was mainly caused by the decline of nitrate and increases in organic matter in the solution. Hydroxyl units on the surface of organic matter in solutions provided binding sites for Cu²⁺, which was demonstrated by CO and OH peak position alterations in Fourier Transform Infrared Spectrometer. In turn, the root contained 2.56 and 2.04 times as much as atrazine in leaves in single and co-contaminated atrazine treatments. In the solution, atrazine removal became stable after 7 days. Cu²⁺ inhibited the total accumulation of atrazine in plants by 12.5 %. Copper-induced biological phenol-like components in solution decreased the total atrazine accumulation in A. tatatinowii.

Eco-friendly Green Synthesis of Silver Nanoparticles from Leaf Extract of Solanum khasianum: Optical Properties and Biological Applications

The green synthesis of silver nanoparticles (AgNPs) was considered to be efficacious over other approaches due to their eco-friendliness, cost-effectiveness, and high stability. The biosynthesis of AgNPs was achieved by the reduction of silver nitrate using the aqueous leaf extract of Solanum khasianum. The biosynthesized AgNPs were examined by a color change and UV-Vis spectroscopy with an absorption spectrum at 440 nm. The biomolecules existing in S. khasianum leaf extract accountable for bioreduction and capping of AgNPs were analyzed by FTIR analysis and confirmed the presence of alcohols, phenols, alkanes, carboxylic acid, nitro compounds, and amines. The crystalline nature of Sk-AgNPs with face-centered cubic lattice was confirmed by X-ray diffraction (XRD) spectrum. The average crystallite size of Sk-AgNPs was computed as 15.96 nm. The lattice constant, unit cell volume, and spacing values of Sk-AgNPs were parallel to the values indexed in the Joint Committee on Powder Diffraction Standard of silver (JCPDS-04-0783). Scanning electron microscope (SEM) imaging witnessed the spherical structure of synthesized AgNPs. Energy dispersive X-ray (EDX) spectrum acknowledged the AgNPs fabrication with strong signals of silver atoms at 3 keV energy. The biofabricated Sk-AgNPs showed a photoluminescence (PL) emission spectrum of 445 nm with an excitation at 330 nm. Sk-AgNPs showed considerable DPPH radical scavenging activity (87.98%) than BHT (86.14%) and also exhibited significant antidiabetic activity compared to acarbose. Sk-AgNPs revealed antibacterial potentiality against B. sphaericus, E. coli, S. aureus, and P. fluorescens. Moreover, Sk-AgNPs showed dose-dependent cytotoxicity against MCF-7 cell line. This method of green synthesis would support the eco-friendly fabrication of AgNPs from S. khasianum leaf extract with considerable therapeutic activities.

Fungal- and Algal-Derived Synthesis of Various Nanoparticles and Their Applications

Nanoparticles synthesis through biological mediated methods with a particular focus on the processes mediated by fungi and algae is discussed, which systematically reviews nanoparticle characterization, composition, synthesis methods, and, lastly but not least, the applications of NPs across five different categories to provide a reference for future research. Most traditional methods to generate nanoparticles have certain limitations, like the toxicity of precursor materials, the need for high-temperature management, and the high cost of synthesis, which ultimately hinders their utility in sectors. Greener synthesis through fungus and algae done through bioreduction by biomolecules or enzymes present in them is low-energy, low-cost, and needs a low-temperature environment, providing a unique technique for the manufacture of various metallic nanoparticles utilized in an array of industries and healthcare.

Bio-fabricated silver nanoparticles for controlling dengue and filaria vectors and their characterization, as well as toxicological risk assessment in aquatic mesocosms

The present study is focused on synthesis of silver nanoparticles from weeds and an assessment of their mosquito larvicidal efficacy. This study also presented the toxicological effects as well as the stability of these nanoparticles in aquatic mesocosms. The weed Digiteria sanguinallis was first time used for the synthesis of silver nanoparticles. The synthesized nanoparticles were characterized by various analytical techniques, such as UV-VIS, TEM, FESEM, EDX, XRD, FTIR, and zeta potential study. The result revealed that the nanoparticles are crystalline, spherical shape with band gap 2.44 eV, and average size 18 nm. The LC₅₀ value of synthesized AgNPs were recorded as 7.47 and 6.31 mg/L at 24 h against Cx. quinquefasciatus and A. albopictus respectively. In contrast, larvicidal activity of weed extract was insignificant against two target species. In aquatic mesocosm study, AgNPs (LC₅₀ dose) does not alter the nature of water parameters within experimental period. However only EC % and ORP were changes because of silver ion oxidation. In biochemical parameters, only stress enzymes for animal and plant species were moderately altered under long term exposure. But glycogen, protein, and AchE of two mosquito species were significantly changed under same mesocosm setup within short exposure. Comparatively, in control mesocosm, synthesized AgNPs are naturally change their nano form within 20 days with the presence of all non-target species and pond sediment. Therefore, it can be concluded that biosynthesized AgNPs could be used as a larvicidal agent in near future with negligible effects on aquatic organisms.

Bandgap and visible-light-induced photocatalytic performance and dye degradation of silver doped HAp/TiO2 nanocomposite by sol-gel method and its antimicrobial activity

Silver doped hydroxyapatite and titanium oxide nanocomposites have been obtained by sol-gel techniques with novel antimicrobial activities for biomedical applications. The synthesis of Ca_10-X Ag_X (PO₄)₆(OH)₂ along with titanium oxide nanoparticles with X_Ag = 0 (HAp/TiO₂), 0.1, 0.25 and 0.5 (Ag:HAp/TiO₂-NCS) was performed. The developed crystalline phase was characterized via X-ray diffraction (XRD), and the morphological features were executed via scanning and transmission electron microscopy (SEM/TEM). The HAp/TiO₂ and silver doped HAp/TiO₂ nanocomposites were spherical grains, with needle and flower-like structures. XRD examination revealed the crystalline phases of HAp/TiO₂ and Ag-doped HAp/TiO₂ nanocomposites. The crystallite size of HAp/TiO₂ and Ag-doped HAp/TiO₂ nanocomposites determined from the XRD pattern was ranged between 16 nm and 20 nm. The FTIR analysis confirms the presence of stretching and vibrational peaks for the presence of silver doped HAp/TiO₂. The EDAX analysis showed the existence of major elements of HAp/TiO₂ and Ag-HAp/TiO₂ nanostructured composites. HAp/TiO₂ and silver doped HAp/TiO₂ were active against both Gram-positive and Gram-negative bacteria such as, E. coli (MTCC 443), S. typhi (MTCC 733), and S. aureus (MTCC 3160). The photocatalytic absorption spectrum implied an increased absorption rate of methylene blue by HAp/TiO₂ and silver doped HAp/TiO₂ nanocomposites. The photocatalytic activity revealed that 50% Ag doped HAp/TiO₂ optimally improved photocatalytic activity.

A Critical Review of the Antimicrobial and Antibiofilm Activities of Green-Synthesized Plant-Based Metallic Nanoparticles

Metallic nanoparticles (MNPs) produced by green synthesis using plant extracts have attracted huge interest in the scientific community due to their excellent antibacterial, antifungal and antibiofilm activities. To evaluate these pharmacological properties, several methods or protocols have been successfully developed and implemented. Although these protocols were mostly inspired by the guidelines from national and international regulatory bodies, they suffer from a glaring absence of standardization of the experimental conditions. This situation leads to a lack of reproducibility and comparability of data from different study settings. To minimize these problems, guidelines for the antimicrobial and antibiofilm evaluation of MNPs should be developed by specialists in the field. Being aware of the immensity of the workload and the efforts required to achieve this, we set out to undertake a meticulous literature review of different experimental protocols and laboratory conditions used for the antimicrobial and antibiofilm evaluation of MNPs that could be used as a basis for future guidelines. This review also brings together all the discrepancies resulting from the different experimental designs and emphasizes their impact on the biological activities as well as their interpretation. Finally, the paper proposes a general overview that requires extensive experimental investigations to set the stage for the future development of effective antimicrobial MNPs using green synthesis.

Microwave assisted hydrothermally synthesized cobalt doped zinc ferrites nanoparticles for the degradation of organic dyes and antimicrobial applications

A novel photocatalyst based cobalt doped zinc ferrites nanoparticles (Co-ZnFe₂O₄ NPs) was prepared to actively concentrate degradation of organic dyes in water. The aim this study is to investigate the effect of substitution of Co²⁺ for Zn²⁺ in zinc ferrites nanoparticles and is characterized with UV-visible spectroscopy, XRD, TEM, SEM, Photoluminescence and Vibrating sample magnetometer technique. When the calcinations temperature increases from 150 °C to 450 °C the amorphous ferrites begins to vanish and the characteristic reflections of cubic spinal Co-ZnFe₂O₄ phase are only observed at 450 °C. The band gap energy (E_g) of sample calcined at 250 °C is calculated at 5.2 eV and that of 450 °C is 4.5 eV. The observed value of band gap energy decreased with increasing calcinations temperature in the samples. The increase in PL peak intensity is due to collective emissions and light-scattering. The doping material, cobalt substitution at spinel zinc ferrites surface, and hence gradually decrease the amorphous effect, increase the saturation magnetization and decrease the coercivity while increasing the temperature. The compounds calcined at 250 °C and 450 °C were investigated for their in vitro antimicrobial activity against Staphylococcus aureus. A sample with 450 °C calcination temperature leads to higher efficiencies in the inhibition of growth of bacteria and degradation of organic dyes. Hence, this study provides a novel photocatalyst of Co-ZnFe₂O₄ NPs in the tile to degrade and analyze the environmentally ignored organic compounds.

Iron Oxide Nanoparticles-Plant Insignia Synthesis with Favorable Biomedical Activities and Less Toxicity, in the “Era of the-Green”: A Systematic Review

In the era of favoring environment-friendly approaches for pharmaceutical synthesis, “green synthesis” is expanding. Green-based nanomedicine (NM), being less toxic and if having biomedical acceptable activities, thence, the chemical methods of synthesis are to be replaced by plants for reductive synthesis. Iron oxide nanoparticles (IONPs) exhibited remarkable anti-microbial and anti-cancer properties, besides being a drug delivery tool. However, owing to limitations related to the chemical synthetic method, plant-mediated green synthesis has been recognized as a promising alternative synthetic method. This systematic review (SR) is addressing plant-based IONPs green synthesis, characteristics, and toxicity studies as well as their potential biomedical applications. Furthermore, the plant-based green-synthesized IONPs in comparison to nanoparticles (NPs) synthesized via other conventional methods, characteristics, and efficacy or toxicity profiles would be mentioned (if available). Search strategy design utilized electronic databases including Science Direct, PubMed, and Google Scholar search. Selection criteria included recent clinical studies, available in the English language, published till PROSPERO registration. After screening articles obtained by first electronic database search, by title, abstract and applying the PICO criteria, the search results yielded a total of 453 articles. After further full text filtrations only 48 articles were included. In conclusion, the current SR emphasizes the perspective of the IONPs plant-mediated green synthesis advantage(s) when utilized in the biomedical pharmaceutical field, with less toxicity.

The Chemical Composition and Health-Promoting Effects of the Grewia Species-A Systematic Review and Meta-Analysis

Globally grown and organoleptically appreciated Grewia species are known as sources of bioactive compounds that avert the risk of communicable and non-communicable diseases. Therefore, in recent years, the genus Grewia has attracted increasing scientific attention. This is the first systematic review which focusses primarily on the nutritional composition, phytochemical profile, pharmacological properties, and disease preventative role of Grewia species. The literature published from 1975 to 2021 was searched to retrieve relevant articles from databases such as Google Scholar, Scopus, PubMed, and Web of Science. Two independent reviewers carried out the screening, selection of articles, and data extraction. Of 815 references, 56 met our inclusion criteria. G. asiatica and G. optiva were the most frequently studied species. We found 167 chemical compounds from 12 Grewia species, allocated to 21 categories. Flavonoids represented 41.31% of the reported bioactive compounds, followed by protein and amino acids (10.7%), fats and fatty acids (9.58%), ash and minerals (6.58%), and non-flavonoid polyphenols (5.96%). Crude extracts, enriched with bioactive compounds, and isolated compounds from the Grewia species show antioxidant, anticancer, anti-inflammatory, antidiabetic, hepatoprotective/radioprotective, immunomodulatory, and sedative hypnotic potential. Moreover, antimicrobial properties, improvement in learning and memory deficits, and effectiveness against neurodegenerative ailments are also described within the reviewed article. Nowadays, the side effects of some synthetic drugs and therapies, and bottlenecks in the drug development pathway have directed the attention of researchers and pharmaceutical industries towards the development of new products that are safe, cost-effective, and readily available. However, the application of the Grewia species in pharmaceutical industries is still limited.

Production and Partial Characterization of α-Amylase Enzyme from Marine Actinomycetes

Amylase producing actinobacteria were isolated and characterized from terrestrial environment. There are a limited number of reports investigating the marine environment; hence, in the present study, four marine enzymes were tested for their amylase production ability. On starch agar plates, the Streptomyces rochei strain showed a higher hydrolytic zone (24 mm) than the other isolates. Growth under optimized culture conditions using Plackett-Burman's experimental design led to a 1.7, 9.8, 7.7, and 3.12-fold increase for the isolates S. griseorubens, S. rochei, S. parvus, and Streptomyces sp., respectively, in the specific activity measurement. When applying the Box-Behnken design on S. rochei using the most significant parameters (starch, K₂HPO₄, pH, and temperature), there was a 12.22-fold increase in the specific activity measurement 7.37 U/mg. The α-amylase was partially purified, and its molecular weight was determined using sodium dodecyl sulfate-polyacrylamide gel electrophoresis. α-Amylase was particularly active at pH 6 and 65°C. The purified enzyme was most active at 65°C and pH 6, thermal stability of 70°C for 40 min, and salt concentration of 1 M with Km and Vmax of 6.58 mg/ml and 21.93 μmol/ml/min, respectively. The α-amylase was improved by adding Cu⁺², Zn⁺², and Fe⁺² (152.21%, 207.24%, and 111.89%). Increased production of α-amylase enzyme by S. rochei KR108310 leads to production of significant industrial products.

Green Synthesis of Metal and Metal Oxide Nanoparticles: Principles of Green Chemistry and Raw Materials

Increased request for metal and metal oxide nanoparticles nanoparticles has led to their large-scale production using high-energy methods with various toxic solvents. This cause environmental contamination, thus eco-friendly “green” synthesis methods has become necessary. An alternative way to synthesize metal nanoparticles includes using bioresources, such as plants and plant products, bacteria, fungi, yeast, algae, etc. “Green” synthesis has low toxicity, is safe for human health and environment compared to other methods, meaning it is the best approach for obtaining metal and metal oxide nanoparticles. This review reveals 12 principles of “green” chemistry and examples of biological components suitable for “green” synthesis, as well as modern scientific research of eco-friendly synthesis methods of magnetic and metal nanoparticles. Particularly, using extracts of green tea, fruits, roots, leaves, etc., to obtain Fe3O4 NPs. The various precursors as egg white (albumen), leaf and fruit extracts, etc., can be used for the „green” synthesis of spinel magnetic NPs. “Green” nanoparticles are being widely used as antimicrobials, photocatalysts and adsorbents. “Green” magnetic nanoparticles demonstrate low toxicity and high biocompatibility, which allows for their biomedical application, especially for targeted drug delivery, contrast imaging and magnetic hyperthermia applications. The synthesis of silver, gold, platinum and palladium nanoparticles using extracts from fungi, red algae, fruits, etc., has been described.

Effect on Human Vascular Endothelial Cells of Au Nanoparticles Synthesized from Vitex mollis

A green method for synthesizing gold nanoparticles is proposed using hydroethanolic extract of Vitex mollis fruit (Vm extract) as a reducer and stabilizer. The formation of gold nanoparticles synthesized with Vm extract (AuVmNPs) was monitored by measuring the ultraviolet-visible spectra. The morphology and crystalline phase were determined using scanning electron microscopy, X-ray diffraction, and high-resolution transmission electron microscopy. Synthesized nanoparticles were generally spherical, and the size distribution obtained by transmission electron microscopy shows two populations with mean sizes of 12.5 and 22.5 nm. Cell viability assay using MTT and cellular apoptosis studies using annexin V on human umbilical vein endothelial cells (HUVECs) and the human mammary epithelial cell line (MCF10A) indicate that AuVmNPs have low toxicity. Cell migration tests indicate that AuVmNPs significantly inhibit HUVEC cell migration in a dose-dependent manner. The evaluation of the localization of AuVmNPs in HUVECs using confocal laser scanning microscopy indicates that nanoparticles penetrate cells and are found in the cytosol without preferential distribution and without entering the nucleus. The inhibitory effect on cellular migration and low toxicity suggest AuVmNPs as appropriate candidates in future studies of antiangiogenic activity.

A superfine glass fibre air filter with rapid response to photocatalytic antibacterial properties under visible light by loading rGO/ZnO

The development of high-performance air filter has become more and more important to public health. However, it has always been very challenging for developing a multifunctional air filter to simultaneously achieve excellent filtration and antibacterial properties. Herein, a versatile air filter was prepared with loading the reduced graphene (rGO) and zinc oxide on the superfine glass fibre (s-GF) with the three-dimensional network structure by in situ sol-gel process followed by calcination, which aims to achieve synergistic high-efficiency air filtration and rapid response to photocatalytic antibacterial properties under visible light. The air filter showed a three-dimensional network structure based on a rGO/ZnO/s-GF multilayer and exhibited the highest catalytic performance by achieving a 95% degradation effect on rhodamine B within 2 h and achieving 100% antibacterial inactivation of the Escherichia coli and Staphylococcus aureus within 4 h under visible light when the weight ratio of rGO in rGO/ZnO is 1.6%. The air filtration efficiency can also be maintained at 99% after loading ZnO and rGO photocatalytic particles. The spectrum of the photoluminescence (PL), UV-Vis diffuse reflectance spectra (DRS) and electron spin resonance (ESR) indicate that the combination of rGO and ZnO on the s-GF can increase the separation of photogenerated carriers and the specific surface area of the air filter, thereby increasing the photocatalytic response and antibacterial properties of the s-GF air filter under visible light in a short time.

Ultrasonic coupling with electrical current to effective activation of Persulfate for 2, 4 Dichlorophenoxyacetic acid herbicide degradation: modeling, synergistic effect, and a by-product study

In this research work, we investigated the ability of the oxidative degradation of 2, 4-Dichlorophenoxy acetic acid herbicide via ultrasonic-assisted in electro-activation of the persulfate system in the presence of nano-zero valent iron. The effect of experimental parameters such as pH value [4-8], electrical current (0.5-1 A), persulfate concentration (0.25-0.5 mg.l-1), nano zero-valent iron dose (0.05-0.1 mg.l-1), and initial organic pollutant concentration (50-100 mg.l-1) on the ultrasonic-electropersulfate process performance was assessed via central composite design. The combination of ultrasonic waves with the electrochemical process to activation of persulfate showed better efficiency into 2, 4-Dichlorophenoxy acetic acid herbicide degradation compared to their implementation in individual and binary systems. Following optimal conditions (pH = 5.62, 0.80 A applied electrical current, 0.39 mg/L persulfate concentration, 0.07 mg/L nano-zero valent iron, and 50 mg/L 2,4-Dichlorophenoxy acetic acid concentration in 40 min reaction), nearly 91% removal was done. Moreover, the complete removal of 2, 4-Dichlorophenoxy acetic acid, 92% COD, and 88% TOC removal was achieved by this process near 140 min reaction. The scavenging experiment confirmed the role of free oxidizing species in the degradation of 2, 4-Dichlorophenoxy acetic acid during the process. Approximately 50% improved 2, 4-Dichlorophenoxy acetic acid removal in the process against the inclusive efficiency of single mechanisms. The obtained results were fitted to the pseudo-first-order kinetic model with a high correlation coefficient (R2 = 0.96). Five important intermediate products of 2, 4-D oxidation were 2, 4-dichlorophenol (2, 4-DCP), 2, 6-dichlorophenol (2, 6-DCP), 4, 6 dichlororesorcinol (4, 6-DCR), 2-chlorohydroquinone (2-CHQ), and 2-chloro-1, 4-benzoquinone (2-CBQ). In the end, can be employed as a satisfactory advanced oxidation process in high mineralization of 2, 4-D and refractory organic pollutants.

Statistical optimization of experimental parameters for extracellular synthesis of zinc oxide nanoparticles by a novel haloalaliphilic Alkalibacillus sp.W7

Green synthesis of zinc oxide nanoparticles (ZnO NPs) through simple, rapid, eco-friendly and an economical method with a new haloalkaliphilic bacterial strain (Alkalibacillus sp. W7) was investigated. Response surface methodology (RSM) based on Box-Behnken design (BP) was used to optimize the process parameters (ZnSO4.7H2O concentration, temperature, and pH) affecting the size of Alkalibacillus-ZnO NPs (Alk-ZnO NPs). The synthesized nanoparticles were characterized using UV-visible spectrum, X-ray diffraction (XRD), Scanning electron microscope-energy dispersive X-ray spectroscopy (SEM-EDX), Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR) and Zeta potential. The UV-Vis spectrum of ZnO NPs revealed a characteristic surface plasmon resonance (SPR) peak at 310 nm. XRD pattern confirmed the hexagonal wurtzite structure of highly pure with a crystallite size 19.5 nm. TEM proved the quasi-spherical shape nanoparticles of size ranging from 1 to 30 nm. SEM-EDX showed spherical shaped and displayed a maximum elemental distribution of zinc and oxygen. FTIR provided an evidence that the biofunctional groups of metabolites in Alkalibacillus sp.W7 supernatant acted as viable reducing, capping and stabilizing agents.

Green synthesis of iron-based nanoparticles using Chlorophytum comosum leaf extract: methyl orange dye degradation and antimicrobial properties

Nowadays, green synthesis methods have gained growing attention in nanotechnology owning to their versatile features including high efficiency, cost-effectiveness, and eco-friendliness. Here, the aqueous extract of Chlorophytum comosum leaf was applied for the preparation of iron nanoparticles (INPs) to obtain spherical and amorphous INPs with a particle size below 100 nm as confirmed by TEM. The synthesized INPs managed to eliminate methyl orange (MO) from the aqueous solution. The concentration of MO can be easily checked via ultraviolet-visible (UV-Vis) spectroscopy throughout the usage of INPs at the presence of H2O2. The synthesized INPs exhibited MO degradation efficiency of 77% after 6 h. Furthermore, the synthesized INPs exhibited antibacterial activity against both Gram-negative and Gram-positive bacteria. The prepared INPs have an impressive effect on Staphylococcus aureus at concentrations below 6 μg/ml. Overall, the synthesized INPs could considerably contribute to our combat against organic dyes and bacteria.

Bioavailability and hepatoprotection enhancement of berberine and its nanoparticles prepared by liquid antisolvent method

The study was devised to prepare berberine nanoparticles by anti-solvent precipitation method and were assessed for their hepatoprotective effect in Male Sprague-Dawley rats against carbon tetrachloride. The pharmacokinetic parameters of the prepared nanoparticles and berberine were evaluated in rabbits. Histopathological studies and blood biochemical analyses were carried out to evaluate the role of both forms of berberine in the experimental animals. Substantial improvement in the liver function test enzymes levels and liver histopathology were achieved in the animals treated with berberine nanoparticles in comparison to the unprocessed berberine whereas, pharmacokinetic parameters for nanoform of berberine were about 3.97 and 3.88 folds higher than that of the unprocessed berberine. The study revealed that the reduction of berberine particle size to nano range improved pharmacokinetic parameters in rabbits. The nano berberine provided better liver protection in experimental rats and high berberine blood concentration. Thus, better hepatoprotective and pharmacokinetics effects were observed for the nano form in comparison to unprocessed form.

In vitro biological properties of Streptomyces cangkringensis isolated from the floral rhizosphere regions

This context was investigated to determine in vitro antimicrobial, antioxidative, and anticancer traits of crude ethyl acetate extract of Streptomyces cangkringensis strain TSAS 04 isolated from soil sample of rhizosphere regions. The antimicrobial activity of ethyl acetate extract of strain TSAS 04 was determined against indicator pathogens using disc diffusion assay which exhibited maximum zones of inhibition of 20.6 ± 0.3 and 16.3 ± 0.6 mm against Bacillus subtilis and Trichoderma viride, respectively. In vitro antioxidant properties of the crude ethyl acetate extract were performed using standard methodologies. The extract revealed maximum DPPḢ and ABTS^•+ radical scavenging activities of 51.1 ± 0.39 and 81.25 ± 0.33%, respectively. Likewise, maximum phosphomolybdenum reduction and Fe³⁺ reduction of the crude ethyl acetate extract of strain TSAS 04 were estimated 76.18 ± 0.10 and 89.01 ± 0.44%, respectively. In vitro anticancer trait of the extract was determined against HeLa cell line using 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay which showed anticancer activities in a dose dependent manner with an IC₅₀ value of 410.5 µg/mL. Fourier transform infrared spectroscopy (FT-IR) and Gas chromatography–mass spectrometry (GC-MS) analyses indicated the presence of distinct functional groups and bioactive components in the extract, respectively. In conclusion, S. cangkringensis strain TSAS 04 showed its effectiveness as ideal bioactive agent by exhibiting substantial antimicrobial, antioxidant, and anticancer properties.

Molecular diversity and hydrolytic enzymes production abilities of soil bacteria

Soil is an integral part of ecosystem which is niche for varieties of microflora. The present study was investigated to isolate varied strains of bacteria from soil samples of three different geographical regions of Tamil Nadu (India) and evaluate their hydrolytic enzymes (amylase, cellulase, and inulinase) producing potentialities. Among 72 bacterial cultures isolated from Ambattur Industrial Estate, Neyveli Lignite Corporation, and Arignar Anna Zoological Park regions, 41.66, 38.88, and 36.11% of isolates were observed amylase, cellulase, and inulinase producers, respectively. On the other hand, 20.83% of total bacteria isolated from all three regions exhibited concurrent production of amylase, cellulase, and inulinase. Potent isolates depicting maximum enzyme activities were identified as Bacillus anthracis strain ALA1, Bacillus cereus strain ALA3, Glutamicibacter arilaitensis strain ALA4, and Bacillus thuringiensis strain ALA5 based on molecular characterization tools. Further, the thermodynamics parameters, open reading frames (ORFs) regions, and guanine-cytosine (GC) content were determined by distinct bioinformatics tools using 16S rRNA sequences of strains. Minimum free energy values for strain ALA1, strain ALA3, strain ALA4, and strain ALA5 were calculated as −480.73, −478.76, −496.63, and −479.03 kcal/mol, respectively. Mountain plot and entropy predicted the hierarchical representation of RNA secondary structure. The GC content of sequence for strain ALA1, strain ALA3, strain ALA4, and strain ALA5 was calculated as 53.06, 52.94, 56.78, and 53.06%, respectively. Nine ORFs were obtained for strain ALA1, strain ALA3, and strain ALA5 while 10 ORFs were observed for strain ALA4. Additionally, bootstrap tree demonstrated close resemblance of strains with existing bacteria of similar genus. Findings showed higher variability of bacterial diversity as hydrolytic enzymes producers in the investigated geographical regions.

Green biomimetic silver nanoparticles utilizing the red algae Amphiroa rigida and its potent antibacterial, cytotoxicity and larvicidal efficiency

The present investigation reports a simple, rapid, inexpensive, and eco-friendly approach for synthesizing Amphiroa rigida-mediated silver nanoparticles (AR-AgNPs) for the first time. The biomimetic synthesized AR-AgNPs were characterized by both spectral and microscopic analysis. The UV-visible spectrum showed the surface plasmon peak at 420 nm, which indicated the formation of AR-AgNPs. X-ray diffraction characterization of AR-AgNPs showed a face-centered cubic crystal (25 nm) and the transmission electron microscope micrograph showed spherical shape. The functional group of polysaccharide that plays a major role as a stabilizing and reducing agent is confirmed by Fourier-transform infrared spectroscopy. The biomimetic synthesized AR-AgNPs showed antibacterial activity against Staphylococcus aureus (21 ± 0.2 mm) and Pseudomonas aeruginosa (15 ± 0.2 mm). Further, the cytotoxic effects of AR-AgNPs against MCF-7 human breast cancer cells were observed through acridine orange-ethidium bromide and Hoechst staining. Besides, AR-AgNPs are found to be inhibit the growth of 3rd and 4th instar larvae of Aedes aegypti in a dose-dependent manner.

Green Synthesis of MnO Nanoparticles Using Abutilon indicum Leaf Extract for Biological, Photocatalytic, and Adsorption Activities

We report the synthesis of MnO nanoparticles (AI-MnO NAPs) using biological molecules of Abutilon indicum leaf extract. Further, they were evaluated for antibacterial and cytotoxicity activity against different pathogenic microbes (Escherichia coli, Bordetella bronchiseptica, Staphylococcus aureus, and Bacillus subtilis) and HeLa cancerous cells. Synthesized NAPs were also investigated for photocatalytic dye degradation potential against methylene blue (MB), and adsorption activity against Cr(VI) was also determined. Results from Scanning electron microscope (SEM), X-ray powder diffraction (XRD), Energy-dispersive X-ray (EDX), and Fourier-transform infrared spectroscopy (FTIR) confirmed the successful synthesis of NAPs with spherical morphology and crystalline nature. Biological activity results demonstrated that synthesized AI-MnO NAPs exhibited significant antibacterial and cytotoxicity propensities against pathogenic microbes and cancerous cells, respectively, compared with plant extract. Moreover, synthesized AI-MnO NAPs demonstrated the comparable biological activities results to standard drugs. These excellent biological activities results are attributed to the existence of the plant’s biological molecules on their surfaces and small particle size (synergetic effect). Synthesized NAPs displayed better MB-photocatalyzing properties under sunlight than an ultraviolet lamp. The Cr(VI) adsorption result showed that synthesized NAPs efficiently adsorbed more Cr(VI) at higher acidic pH than at basic pH. Hence, the current findings suggest that Abutilon indicum is a valuable source for tailoring the potential of NAPs toward various enhanced biological, photocatalytic, and adsorption activities. Consequently, the plant’s biological molecule-mediated synthesized AI-MnO NAPs could be excellent contenders for future therapeutic applications.

Green synthesis and characterization of gold nanoparticles using endophytic fungi Fusarium solani and its in-vitro anticancer and biomedical applications

The present study aimed to explore the anticancer potentials of the gold nanoparticles (NPs) obtained by green synthesis method using an endophytic strain Fusarium solani ATLOY - 8 has been isolated from the plant Chonemorpha fragrans. The formation of the NPs was analyzed by UV, FTIR, SEM and XRD. The synthesized NPs showed pink-ruby red colors and high peak plasmon band was observed between 510 and 560 nm. It is observed that intensity of absorption steadily increases the wavelength and band stabilizes at 551 nm. The XRD pattern revealed the angles at 19, 38.32, 46.16, 57.50, and 76.81° respectively. Interestingly, the FTIR band absorption noted at 1413 cm-1, 1041 cm-1 and 690 cm-1 ascribed the presence of amine II bands of protein, C-N and C-H stretching vibrations of the nanoparticles. SEM analysis indicated that the average diameter of the synthesized nanoparticles was between 40 and 45 nm. These NPs showed cytotoxicity on cervical cancer cells (He La) and against human breast cancer cells (MCF-7) and the NPs exhibited dose dependent cytotoxic effect. IC50 value was 0.8 ± 0.5 μg/mL on MCF-7 cell line and was found to be 1.3 ± 0.5 μg/mL on MCF-7 cell lines. The synthesized NPs induced apoptosis on these cancer cell lines. The accumulation of apoptotic cells decreased in sub G0 and G1 phase of cell cycle in the MCF-7 cancer cells were found to be 55.13%, 52.11% and 51.10% after 12 h exposure to different concentrations. The results altogether provide an apparent and versatile biomedical application for safer chemotherapeutic agent with little systemic toxicity.