Threat of plastic ageing in marine environment. Adsorption/desorption of micropollutants

New insights into the impact of leachates from in-field collected plastics on aquatic invertebrates and vertebrates

The impact of leachates from micronized beached plastics of the Mediterranean Sea and Atlantic Ocean on coastal marine ecosystems was investigated by using a multidisciplinary approach. Chemical analysis and ecotoxicological tests on phylogenetically distant species were performed on leachates from the following plastic categories: bottles, pellets, hard plastic (HP) containers, fishing nets (FN) and rapido trawling rubber (RTR). The bacteria Alivibrio fischeri, the nauplii of the crustaceans Amphibalanus amphitrite and Acartia tonsa, the rotifer Brachionus plicatilis, the embryos of the sea urchin Paracentrotus lividus, the ephyrae of the jellyfish Aurelia sp. and the larvae of the medaka Oryzias latipes were exposed to different concentrations of leachates to evaluate lethal and sub-lethal effects. Thirty-one additives were identified in the plastic leachates; benzophenone, benzyl butyl phthalate and ethylparaben were present in all leachates. Ecotoxicity of leachates varied among plastic categories and areas, being RTR, HP and FN more toxic than plastic bottles and pellets to several marine invertebrates. The ecotoxicological results based on 13 endpoints were elaborated within a quantitative weight of evidence (WOE) model, providing a synthetic hazard index for each data typology, before their integrations in an environmental risk index. The WOE assigned a moderate and slight hazard to organisms exposed to leachates of FN and HP collected in the Mediterranean Sea respectively, and a moderate hazard to leachates of HP from the Atlantic Ocean. No hazard was found for pellet, bottles and RTR. These findings suggest that an integrated approach based on WOE on a large set of bioassays is recommended to get a more reliable assessment of the ecotoxicity of beached-plastic leachates. In addition, the additives leached from FN and HP should be further investigated to reduce high concentrations and additive types that could impact marine ecosystem health.

Immunotoxicity of microplastics in fish

Plastic waste degrades slowly in aquatic environments, transforming into microplastics (MPs) and nanoplastics (NPs), which are subsequently ingested by fish and other aquatic organisms, causing both physical blockages and chemical toxicity. The fish immune system serves as a crucial defense against viruses and pollutants present in water. It is imperative to comprehend the detrimental effects of MPs on the fish immune system and conduct further research on immunological assessments. In this paper, the immune response and immunotoxicity of MPs and its combination with environmental pollutants on fish were reviewed. MPs not only inflict physical harm on the natural defense barriers like fish gills and vital immune organs such as the liver and intestinal tract but also penetrate cells, disrupting intracellular signaling pathways, altering the levels of immune cytokines and gene expression, perturbing immune homeostasis, and ultimately compromising specific immunity. Initially, fish exposed to MPs recruit a significant number of macrophages and T cells while activating lysosomes. Over time, this exposure leads to apoptosis of immune cells, a decline in lysosomal degradation capacity, lysosomal activity, and complement levels. MPs possess a small specific surface area and can efficiently bind with heavy metals, organic pollutants, and viruses, enhancing immune responses. Hence, there is a need for comprehensive studies on the shape, size, additives released from MPs, along with their immunotoxic effects and mechanisms in conjunction with other pollutants and viruses. These studies aim to solidify existing knowledge and delineate future research directions concerning the immunotoxicity of MPs on fish, which has implications for human health.

Microplastics and PAHs mixed contamination: An in-depth review on the sources, co-occurrence, and fate in marine ecosystems

Microplastics (MPs) and polycyclic aromatic hydrocarbons (PAHs) are toxic contaminants that have been found in marine ecosystems. This review aims to explore the sources and mechanisms of PAHs and MPs mixed contamination in marine environments. Understanding the released sources of PAHs and MPs is crucial for proposing appropriate regulations on the release of these contaminants. Additionally, the mechanisms of co-occurrence and the role of MPs in distributing PAHs in marine ecosystems were investigated in detail. Moreover, the chemical affinity between PAHs and MPs was proposed, highlighting the potential mechanisms that lead to their persistence in marine ecosystems. Moreover, we delve into the various factors influencing the co-occurrence, chemical affinity, and distribution of mixed contaminants in marine ecosystems. These factors, including environmental characteristics, MPs properties, PAHs molecular weight and hydrophobicity, and microbial interactions, were critically examined. The co-contamination raises concerns about the potential synergistic effects on their degradation and toxicity. Interesting, few studies have reported the enhanced photodegradation and biodegradation of contaminants under mixed contamination compared to their individual remediation. However, currently, the remediation strategies reported for PAHs and MPs mixed contamination are scarce and limited. While there have been some initiatives to remove PAHs and MPs individually, there is a lack of research specifically targeting the removal of mixed contaminants. This deficiency highlights the need for further investigation and the development of effective remediation approaches for the efficient remediation of PAHs and MPs from marine ecosystems.

Titanium Dioxide and Calcium Sulfate Whiskers Are Used for the Preparation of High Performance Polypropylene and Reduce White Pollution

The anti-aging agent TiO2-polyacrylonitrile (PAN) and the mechanical strengthening agent CSW-PAN were prepared by radical polymerization using rutile nano-titanium dioxide (TiO2) and anhydrous calcium sulfate whisker (CSW) as raw materials. The structures of TiO2-PAN and CSW-PAN were characterized using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Simultaneously, the mechanical properties, aging properties, and thermal stability of TiO2-PAN/CSW-PAN/polypropylene (PP) composites were studied, and the results showed that the surfaces of nano-titanium dioxide and calcium sulfate whiskers were successfully grafted with acrylonitrile. Owing to the introduction of new elements, such as acrylonitrile, nano-titanium dioxide and calcium sulfate whiskers have anti-aging properties. In comparison of the impact strength and tensile strength of TiO2-PAN/PP and TiO2-PAN/CSW-PAN/PP before aging, it can be proven that adding CSW-PAN can significantly enhance the mechanical properties of TiO2-PAN/CSW-PAN/PP. After 1000 h of aging, the tensile strength of the ternary composite TiO2-PAN/CSW-PAN/PP was 19.88 MPa when the addition amount of TiO2-PAN and CSW-PAN was 3%. Moreover, the impact strength of the ternary composite material TiO2-PAN/CSW-PAN/PP after 1000 h of aging is even better than that of non-aging pure PP materials, proving that the service life of improved PP products is extended, unnecessary waste and environmental pollution can be relieved, and the needs of specific engineering fields can be met.

Screening of organic chemicals associated to virgin low-density polyethylene microplastic pellets exposed to the Mediterranean Sea environment by combining gas chromatography and liquid chromatography coupled to quadrupole-time-of-flight mass spectrometry

In this work, organic chemicals associated with microplastics (MPs) exposed to a coastal anthropogenized environment for up to eight weeks have been screened for, in order to discern the (de)sorption dynamics of chemicals in the marine ecosystem. Low-density polyethylene (LDPE) pellets were studied since they represent primary MPs used by the plastic industry and a relevant input of MPs into the oceans. To maximize the coverage of chemicals that could be detected, both liquid and gas chromatography coupled to quadrupole-time-of-flight (GC-QTOF and LC-QTOF, respectively) were used. In the case of LC-QTOF, an electrospray ionization source was employed, and the compounds were investigated by combining suspect and non-target screening workflows. The GC-QTOF was equipped with an electron ionization source and compounds were screened in raw and derivatized (silylated) extracts by deconvolution and contrast to high- and low-resolution libraries. A total of 50 compounds of multifarious classes were tentatively identified. Among them, melamine and 2-ethylhexyl salicylate (EHS) were detected in the original MPs but were rapidly desorbed. Melamine was completely released into the marine environment, while EHS was partly released but a portion remained bound to the MPs. On the other hand, many other chemicals of both anthropogenic (e.g. phenanthrene or benzophenone) and natural origin (e.g. betaine and several fatty acids) accumulated onto MPs over time. Quantification of 12 unequivocally identified chemicals resulted into a total concentration of 810 μg/kg after MPs exposure for 8 weeks.

Effects of primary leachates of conventional and alternative plastics in Cyprinodon variegatus fish larvae: Endocrine disruption and toxicological responses

The inclusion of hazardous substances in the formulation of plastics raises significant concerns, particularly, if those substances are released as primary leachates during plastic degradation and/or fragmentation. In this sense, the production of degradable plastics holding deleterious additives can increase the release of harmful substances into the environment. Additionally, the effects of primary leachates of "eco-friendly" materials remain unexplored. To address this, we performed exposures to primary leachates of alternative polymers, and commercial bags to verify possible responses associated with endocrine disruption and/or activation of the detoxification pathway in larvae of the marine fish model Cyprinodon variegatus. The chemical characterization evidenced a great number of additives in the formulation of the materials analyzed in this study. Those include, except for the PLA sample, relevant levels of the hazardous phthalates DEHP and DiBP. Regarding the effects on marine fish larvae, exposure to leachates from alternative polymers (10 g/L) PHB and PHBV produced remarkable mortality (100%). While the exposure to bag leachates of all tested materials (1 and 10 g/L) produced alterations in biomarkers for steroidogenic and detoxification pathways. To a lesser extent (10 g/L), three materials produced significant alterations in estrogenic biomarkers (Home-compostable bag 1, LDPE and Recycled PE bags). Although the alterations in gene expression were not directly correlated to the amount of DEHP or DiBP, we can conclude that primary leachates of "eco-friendly" bags are harmful to marine vertebrates.

The aging behavior of degradable plastic polylactic acid under the interaction of environmental factors

Microplastics leaching from aging biodegradable plastics pose potential environmental threats. This study used response surface methodology (RSM) to investigate the impact of temperature, light, and humidity on the aging characteristics of polylactic acid (PLA). Key evaluation metrics included the C/O ratio, functional groups, crystallinity, surface topography, and mechanical properties. Humidity was discovered to have the greatest effect on the ageing of PLA, followed by light and temperature. The interactions between temperature and light, as well as humidity and sunlight, significantly impact the aging of PLA. XPS analysis revealed PLA underwent aging due to the cleavage of the ester bond (O-C=O), resulting in the addition of C=O and C-O. The aging process of PLA was characterized by alterations in surface morphology and augmentation in crystallinity, resulting in a decline in both tensile strength and elongation. These findings might offer insights into the aging behavior of degradable plastics under diverse environmental conditions.

Adsorption interactions between typical microplastics and enrofloxacin: Relevant contributions to the mechanism

Microplastics (MPs) are increasingly contaminating the environment and they can combine with antibiotics as carriers to form complex contaminants. In this study, we systematically investigated the interactions between the antibiotic enrofloxacin (ENR) and MPs comprising polyethylene (PE), polyvinyl chloride (PVC), and polystyrene (PS). Characterization was performed by using conventional techniques and the mechanisms involved in interactions were initially explored based on adsorption kinetics, isotherms, and resolution experiments, and the adsorption capacities of the MPs were determined. In addition, the extended Derjaguin-Landau-Verwey-Overbeek theory was used to investigate the interaction mechanisms. The results showed that the interactions were weaker in strong acidic and alkaline environments, and the interactions were also inhibited at higher salt ion concentrations. The saturation adsorption amounts of ENR on PVC, PE, and PS were 74.63 μg/g, 103.09 μg/g, and 142.86 μg/g, respectively. The interactions between MPs and ENR were dominated by hydrophobic interactions, followed by van der Waals forces and acid-base forces. This study provides new insights into the adsorption behavior of ENR by MPs.

Aging and characterization of disposable polypropylene plastic cups based microplastics and its adsorption for methylene blue

Microplastics (MPs) as emerging pollutants are of increasing concern, due to their ubiquitous, uncertain, and complex environmental impacts. Different from the standard spherical MPs without additives, here polypropylene microplastics (PP-MPs) in flake derived from the disposable plastic cup in food-grade in daily life were studied. The characterization of PP-MPs demonstrated that the carbonyl index represented the aging degree was enhanced from 0.26 significantly to 0.82 after 10 days, and the aging process fitted well with pseudo-first-order kinetic. Moreover, the crystallinity degree, polarity and surface negative charges were enhanced, while the hydrophobicity was decreased. The adsorption behavior of PP-MPs toward methylene blue (MB), and the impacts of various pHs, salinities, and humic acid in aquatic environments were also explored. The pseudo-second-order kinetic, Henry and Sips isotherm models provided a good correlation with the experimental data, indicating that the rate-limiting step was closely related with the complex surface adsorption, and the hydrophobic partitioning, polar interaction, electrostatic attraction, and hydrogen bonding were possibly involved in the adsorption. These exhaustive experiments aim to provide a theoretical basis for assessing and better understanding the environmental behavior of disposable PP plastic cups in nature.

Microbial community structure and co-occurrence network stability in seawater and microplastic biofilms under prometryn pollution in marine ecosystems

Prometryn has been extensively detected in marine environment because of its widespread usage in agriculture and aquaculture and has been concerns since its serious effects on aquatic organisms. However, its impact on the microbial community in the marine ecosystem including seawater and biofilm is still unclear. Therefore, a short-term indoor microcosm experiment of prometryn exposure was conducted. This study found that prometryn had a more significant impact on the structure and stability of the microbial community in seawater compared to microplastic biofilms. Additionally, we observed that the assembly of the microbial community in biofilms was more affected by stochastic processes than in seawater under the exposure of prometryn. Our study provided evidence for the increasing impact of the microbial communities under the stress of prometryn and microplastics.

Using Spirulina platensis as a natural biocoagulant for polystyrene removal from aqueous medium: performance, optimization, and modeling

Microplastics (MPs) are newly recognized contaminants that result from the breakdown of plastics released into aquatic environments. This study focuses on the elimination of polystyrene (PS) using S. platensis, a natural biocoagulant, from aqueous solutions. The research investigated several crucial variables, including the initial level of PS ranging from 100 to 900 mg L-1, pH levels from 4 to 10, the contact time of 20-40 min, and doses of S. platensis ranging from 50 to 250 mg L-1. The analysis of the data revealed that the quadratic model offered the best fit for the experimental results. In the present study, we utilized S. platensis as a novel natural biocoagulant to effectively eliminate PS from aqueous solutions. Process optimization was performed using a Box-Behnken design (BBD). The best-fitting model for the data was the quadratic model. The results displayed that the highest elimination of PS (81%) was occurred at a pH of 4, with a contact time of 30 min, a dose of S. platensis at 250 mg L-1, and a PS concentration of 500 mg L-1. These findings show that S. platensis has a significant effect on removing PS from the aquatic environment. Algae can serve as a convenient and eco-friendly method, replacing chemical coagulants, to effectively remove MPs from the aquatic environment.

Microplastic pollution and ecological risk assessment of Yueqing Bay affected by intensive human activities

Microplastics (MPs) are a widespread environmental problem posing ecological risks in the ocean. We investigated the abundance, spatial distribution, characteristics and ecological risks of MPs in surface seawater, sediments and organisms in Yueqing Bay, China. MPs were detected in both environmental media and organisms. The overall abundance (0.24 items/m3 seawater, 6.13 items/kg dry sediment, 0.77 items/individual in organisms) was low to medium compared with other coastal areas. The MPs were mainly derived from the high-intensity mariculture and shipping in the bay, as well as industrial and human activities along the surrounding coast. The abundance of MPs in water of the left (western) bay (0.39 items/m3) was considerably higher than that of the right (north-eastern) bay (0.07 items/m3) due to the different levels of population and economic development on the left and right coasts. The ecological risk assessment showed generally low to medium risk from MPs pollution in Yueqing Bay, with higher ecological risk index (H) and potential ecological hazards (RI) of MPs polymers in water samples. These data emphasize the need for timely and effective action to reduce the contribution of intensive human activities to MPs pollution and provide information for further ecotoxicological studies, pollution control, and policy development of MPs.

Physiological impact of personal care product constituents on non-target aquatic organisms

Personal care products (PCPs) are products used in cleaning, beautification, grooming, and personal hygiene. The rise in diversity, usage, and availability of PCPs has resulted in their higher accumulation in the environment. Thus, these constitute an emerging category of environmental contaminants due to the potential of its constituents (chemical and non-chemical) to induce various physiological effects even at lower concentrations (ng/L). For analyzing the impact of the PCPs constituents on the non-target organism about 300 article including research articles, review articles and guidelines were studied from 2000 to 2023. This review aims to firstly discuss the fate and accumulation of PCPs in the aquatic environment and organisms; secondly provides overview of environmental risks that are linked to PCPs; thirdly review the trends, current status of regulations and risks associated with PCPs and finally discuss the knowledge gaps and future perspectives for future research. The article discusses important constituents of PCPs such as antimicrobials, cleansing agents and disinfectants, fragrances, insect repellent, moisturizers, plasticizers, preservatives, surfactants, UV filters, and UV stabilizers. Each of them has been found to display certain toxic impact on the aquatic organisms especially the plasticizers and UV filters. These continuously and persistently release biologically active and inactive components which interferes with the physiological system of the non-target organism such as fish, corals, shrimps, bivalves, algae, etc. With a rise in the number of toxicity reports, concerns are being raised over the potential impacts of these contaminant on aquatic organism and humans. The rate of adoption of nanotechnology in PCPs is greater than the evaluation of the safety risk associated with the nano-additives. Hence, this review article presents the current state of knowledge on PCPs in aquatic ecosystems.

Influence of UV exposure time and simulated marine environment on different microplastic degradation

This study investigated the influence of environmental factors (UV radiation and salinity) in the degradative process of microplastics (MPs). MPs derived from polypropylene (PP), polystyrene (PS), and ethylene-vinyl acetate (EVA) were subjected to accelerated photodegradation while being submerged in distilled water or artificial seawater. Depending on the polymer, changes in surface properties, new functional chemical group formation and oxidative index, and thermal characteristics of samples were observed. After photodegradation experiments, EVA-MPs samples showed an increase in their thermal resistance, besides the changes in their surface. PP-MPs crystallinity index increased upon exposure to UV radiation. PS samples showed a higher carbonyl and hydroxyl index after 30 h of UV exposure. The methodology exploited applies to any location in the world and can be comparable once considering the total ultraviolet index (UVI). The saline medium increases the crystallinity index of PP and EVA-MPs samples and intensifies the formation of new carbonyl and hydroxyl bonds in EVA-MPs samples. The results showed that several environmental factors should be considered in interpreting MPs photodegradation.

Human health risk model for microplastic exposure in the Arctic region

Microplastics enriched with carcinogens like heavy metals, polycyclic aromatic hydrocarbons (PAHs), and their derivatives are ubiquitous in Arctic waters. They contaminate the local land and sea-based food sources, which is a significant health hazard. It is thus imperative to assess the risk posed by them to the nearby communities, which primarily rely on locally available food sources to meet their energy requirements. This paper proposes a novel ecotoxicity model to assess the human health risk posed by microplastics. The region's geophysical and environmental conditions affecting human microplastic intake, along with the human physiological parameters influencing biotransformation, are incorporated into the developed causation model. It investigates the carcinogenic risk associated with microplastic intake in humans via ingestion in terms of incremental excess lifetime cancer risk (IELCR). The model first evaluates microplastic intake and then uses reactive metabolites produced due to the interaction of microplastics with xenobiotic metabolizing enzymes to assess cellular mutations that result in cancer. All these conditions are mapped in an Object-Oriented Bayesian Network (OOBN) framework to evaluate IELCR. The study will provide a vital tool for formulating better risk management strategies and policies in the Arctic region, especially concerning Arctic Indigenous peoples.

Hazardous state lifetimes of biodegradable plastics in natural environments

Plastic pollution is a critical problem that has the potential for long-lasting impact. While all plastics eventually break down to at least some degree, they can remain in different transition states, such as microplastics and nanoplastics, for extended periods of time before reaching complete mineralisation to non-hazardous end products. Each of the transition states represents different types of hazards, so it is critical to understand the factors driving the lifetimes of plastics within these states. To do this, we propose a framework for assessing plastic lifetimes in natural environments based on the flow of material through potentially hazardous states: macroplastic and mesoplastic, microplastic, nanoplastic and soluble products. State changes within this framework are underpinned by three key processes: fragmentation, depolymerisation, and bioassimilation, with the pathways for generation of the different plastic states, and the lifetimes within these states, varying widely for individual materials in different environments due to their dependence on polymer material type, form and properties, and environmental factors. The critical factors driving these processes can therefore appear complex, but molecular weight, crystallinity, oxygen and water diffusivity, and inherent polymer chain reactivity (including to enzymes) are key to our understanding. By analysing currently available data that take factors such as these into consideration, we have generated information on the most likely states in which a range of plastics with different environmental degradation behaviour may exist over time in natural environments. Polyethylene (PE), for example, should be expected to fragment and accumulate in the environment as microplastic and nanoplastic. Interestingly, the state-profile for the biodegradable plastic polylactic acid (PLA) is similar, albeit over shorter timeframes. PLA also likely fragments, but then the relatively slow process of abiotic depolymerisation results in accumulation of microplastic and nanoplastic. By contrast, the state-profile for the biodegradable plastic polyhydroxyalkanoate (PHA) would be expected to be very different. The bulk material is less susceptible to embrittlement and fragmentation as a primary path to biodegradation, since the rapid enzyme catalysed depolymerisation of exposed surfaces proceeds in conjunction with bioassimilation.

Insights into interactions of biodegradable and non-biodegradable microplastics with heavy metals

Biodegradable microplastics (BMPs) are considered to be environmentally friendly compared to non-biodegradable plastics (NMPs). However, BMPs are likely to become toxic during their transport because of the adsorption of pollutants (e.g., heavy metals) onto them. This study investigated the uptake of six heavy metals (Cd2+, Cu2+, Cr3+, Ni2+, Pb2+, and Zn2+) by a common BMPs (polylactic acid (PLA)) and compared their adsorption characteristics to those of three types of NMPs (polyethylene (PE), polypropylene (PP), and polyvinyl chloride (PVC)) for the first time. The order of heavy metal adsorption capacity among the four MPs was PE > PLA > PVC > PP. The findings suggest that BMPs contained more toxic heavy metals than some NMPs. Among the six heavy metals, Cr3+ showed considerably stronger adsorption than other heavy metals in both BMPS and NMPs. The adsorption of heavy metals on MPs can be well explained using the Langmuir isotherm model, while the adsorption kinetic curves showed the best fit to the pseudo-second-order kinetic equation. Desorption experiments revealed that BMPs released a higher percentage of heavy metals (54.6-62.6%) in the acidic environment in a shorter time (~ 6 h) compared to NMPs. Overall, this study provides insights into interactions of BMPs and NMPs with heavy metals and their removal mechanisms in aquatic environment.

Aging rate, environmental risk and production efficiency of the low-density polyethylene (LDPE) films with contrasting thickness in irrigated region

Physical thickness of low-density polyethylene (LDPE) films might determine the release rate of phthalic acid esters (PAEs) & structural integrity and affect production efficiency. However, this critical issue is still unclear and little reported. Aging effects were evaluated in LDPE films with the thickness of 0.006, 0.008, 0.010 and 0.015 mm in a maize field of irrigation region. The Scanning electron microscope (SEM) results showed that the proportion of damaged area (Dam) to total area of LDPE films was massively lowered with increasing thickness after aging. The highest and lowest Dam was 32.2% and 3.5% in 0.006 and 0.015 mm films respectively. Also, the variations in peak intensity of asymmetric & symmetrical stretching vibrations (ASVI & SSVI) were detected using Fourier transform infrared spectrum (FTIR), indicating that the declines in peak intensity tended to be slower with thickness. Interestingly, the declines in physical integrity were tightly associated with increasing exhalation rate of PAEs. Average releasing rate of PAEs was 38.2%, 31.4%, 31.5% and 19.7% in LDPE films from 0.006 to 0.015 mm respectively. Critically, thicker film mulching can lead to greater soil water storage at plough layer (SWS-PL) and better thermal status, accordingly harvesting higher economic benefit. Therefore, LDPE film thickening may be a solution to reduce environmental risk but improve production efficiency in arid region.

Impact and mitigation of lead, cadmium and micro/nano plastics in fragrant rice

Heavy metals (HMs) and micro(nano)plastics (MNPs), represent a significant risk to global food supply as well as a potential risk to humankind. Over 50% of the worldwide population eat rice every day, and rice aroma is a significant qualitative trait that is highly valued by consumers and fetches premium prices in the global market. Despite the huge commercial importance of fragrant rice, limited studies were directed to investigate the influence of HMs and MNPs on yield related traits and 2-Acetyl-1-pyrroline (2-AP) compound, mainly responsible for aroma production in fragrant rice. In this review, we found that the interaction of HMs and MNPs in fragrant rice is complex and accumulation of HMs and MNPs was higher in root as compared to the grains. Nutrients and phytohormones mediated mitigation of HMs and MNPs were most effective sustainable strategies. In addition, monitoring the checkpoints of 2-AP biosynthesis and its interaction with HMs and MNPs is challenging. Finally, we explained the potential challenges that fragrant rice faces considering the continuous rise in environmental pollutants and discussed the future avenues of research to improve fragrant rice's yield and qualitative traits.

The toxicity of microplastics and their leachates to embryonic development of the sea cucumber Apostichopus japonicus

Microplastic pollution has been widely detected across the global ocean, posing a major threat to a wide variety of marine biota. To date, the deleterious impacts of microplastics have predominantly been linked to their direct exposure, while the potential risks posed by the leachates emanating from microplastics have received comparatively less attention. Here, the toxicity of virgin plasticized polyvinyl chloride (PVC) microspheres and their leachates were evaluated on the embryo-larval development of sea cucumber Apostichopus japonicus using an in-vitro assay. Results showed that a significant toxic effect of both PVC microspheres and their leachates on the embryo development and larval growth of sea cucumbers follows a dose-dependent and time-dependent pattern. Nonetheless, the toxicity of PVC leachates surpasses that of the microspheres themselves. Abnormal developmental phenotypes, such as aberrant gastrulation, misaligned mesenchymal cells, and delayed arm development, were also observed in embryos and larvae treated with PVC. Further chemical analyses of PVC microspheres and leachates revealed the existence of five distinct phthalate esters (PAEs), with DIBP (diisobutyl phthalate) and DBP (dibutyl phthalate) exhibiting higher concentrations in the PVC leachates. This finding suggests that the elevated toxicity of plastic leachate may be attributed to the leaching of phthalate additives from the plastic particles.

Mitigating plastic pollution at sea: Natural seawater degradation of a sustainable PBS/PBAT marine rope

This paper evaluates the use of a PBS/PBAT biodegradable rope to reduce the environmental impact of fishing gear lost at sea. The study aims to better understand the degradation mechanisms that the rope and its monofilaments may encounter due to the long term exposure to seawater. The monofilaments were immersed in natural seawater for up to 18 months, and rope samples were also immersed to study aging at a larger scale and evaluate the ability of a modelling tool to predict initial and aged states of the rope. At low temperatures, no loss of properties was observed for the monofilament and rope. However, at higher temperatures, biodegradation and hydrolysis processes were observed, leading to a faster loss of properties in the monofilament compared to the rope. The modelling tool provided conservative predictions due to severe mechanical test conditions of aged monofilament and a degradation gradient within the rope structure.

Understanding microplastic pollution of marine ecosystem: a review

Microplastics are emerging as prominent pollutants across the globe. Oceans are becoming major sinks for these pollutants, and their presence is widespread in coastal regions, oceanic surface waters, water column, and sediments. Studies have revealed that microplastics cause serious threats to the marine ecosystem as well as human beings. In the past few years, many research efforts have focused on studying different aspects relating to microplastic pollution of the oceans. This review summarizes sources, migration routes, and ill effects of marine microplastic pollution along with various conventional as well as advanced methods for microplastics analysis and control. However, various knowledge gaps in detection and analysis require attention in order to understand the sources and transport of microplastics, which is critical to deploying mitigation strategies at appropriate locations. Advanced removal methods and an integrated approach are necessary, including government policies and stringent regulations to control the release of plastics.

Sunlight and marine weathering of poly(oxymethylene): Evolution of the physico-chemical properties

Plastic pollution is now an environmental problem that affects all environmental compartments. The study of plastic degradation in terrestrial, marine and other freshwater environments is emerging. Research is mainly focused on plastic fragmentation into microplastics. In this contribution, an engineering polymer, poly(oxymethylene) (POM), was studied under different weathering conditions using physico-chemical characterization techniques. A POM homopolymer and a POM copolymer were characterized by electron microscopy, tensile tests, DSC, infrared spectroscopy and rheometry tests after climatic and marine weathering or artificial UV/water spray cycles. Natural climatic conditions were the most favorable for POM degradation, especially under solar UV, as evidenced by the strong fragmentation into microplastics when subjected to artificial UV cycles. The evolution of properties with exposure time was found to be non-linear under natural conditions, in contrast to artificial conditions. Two main stages of degradation were evidenced by the correlation between strain at break and carbonyl indices.

Microplastic sources, formation, toxicity and remediation: a review

Microplastic pollution is becoming a major issue for human health due to the recent discovery of microplastics in most ecosystems. Here, we review the sources, formation, occurrence, toxicity and remediation methods of microplastics. We distinguish ocean-based and land-based sources of microplastics. Microplastics have been found in biological samples such as faeces, sputum, saliva, blood and placenta. Cancer, intestinal, pulmonary, cardiovascular, infectious and inflammatory diseases are induced or mediated by microplastics. Microplastic exposure during pregnancy and maternal period is also discussed. Remediation methods include coagulation, membrane bioreactors, sand filtration, adsorption, photocatalytic degradation, electrocoagulation and magnetic separation. Control strategies comprise reducing plastic usage, behavioural change, and using biodegradable plastics. Global plastic production has risen dramatically over the past 70 years to reach 359 million tonnes. China is the world's top producer, contributing 17.5% to global production, while Turkey generates the most plastic waste in the Mediterranean region, at 144 tonnes per day. Microplastics comprise 75% of marine waste, with land-based sources responsible for 80-90% of pollution, while ocean-based sources account for only 10-20%. Microplastics induce toxic effects on humans and animals, such as cytotoxicity, immune response, oxidative stress, barrier attributes, and genotoxicity, even at minimal dosages of 10 μg/mL. Ingestion of microplastics by marine animals results in alterations in gastrointestinal tract physiology, immune system depression, oxidative stress, cytotoxicity, differential gene expression, and growth inhibition. Furthermore, bioaccumulation of microplastics in the tissues of aquatic organisms can have adverse effects on the aquatic ecosystem, with potential transmission of microplastics to humans and birds. Changing individual behaviours and governmental actions, such as implementing bans, taxes, or pricing on plastic carrier bags, has significantly reduced plastic consumption to 8-85% in various countries worldwide. The microplastic minimisation approach follows an upside-down pyramid, starting with prevention, followed by reducing, reusing, recycling, recovering, and ending with disposal as the least preferable option.

Long-term immersion of compostable plastics in marine aquarium: Microbial biofilm evolution and polymer degradation

The best-selling compostable plastics, polylactic acid (PLA) and polybutylene adipate-co-terephthalate (PBAT), can accidentally end up in the marine environment due to plastic waste mismanagement. Their degradation and colonization by microbial communities are poorly documented in marine conditions. To better understand their degradation, as well as the dynamics of bacterial colonization after a long immersion time (99, 160, and 260 days), PBAT, semicrystalline, and amorphous PLA films were immersed in a marine aquarium. Sequencing and chemical analyses were used in parallel to characterize these samples. Despite the variation in the chemical intrinsic parameters of these plastics, their degradation remains very slow. Microbial community structure varied according to the immersion time with a high proportion of Archaea. Moreover, the plastisphere structure of PBAT was specific. A better understanding of compostable plastic degradability is crucial to evaluate their impact on ecosystems and to eco-design new recyclable plastics with optimal degradation properties.

Overview of microplastic pollution and its influence on the health of organisms

Microplastic pollution has gradually become a major global concern, due to the widespread use of plastics. Microplastics enter the environment and are degradated, while also being ingested by organisms, affecting various physiological functions and adversely affecting the health of organisms. Microplastic pollution is currently a wide concern, but data on the impact on organisms is still not sufficient. Therefore, this review summarizes the research on microplastic pollution in marine, soil and fresh water, and its impact on organisms, focusing on the effects of microplastics on organisms' feeding behavior and oxidative stress responses, intestinal microbes and reproductive function, and the combined effects of microplastic pollutants on organisms. We also summarized the various possible ways of microplastics entering into the human body, and posing a potential threat to human health, which still needs further research.

PET plastics as a Trojan horse for radionuclides

Mismanaged plastic waste interacts with secondary environmental pollutants, potentially aggravating their impact on ecosystems and human health. Here we characterized the natural and artificial radionuclides in polyethylene terephthalate (PET) bottles collected from the industrial littoral discharge of a phosphate fertilizer plant. The activity concentrations in littered bottles ranged from 0.47 (²⁰⁸Tl) to 12.70 Bq·kg^-1 (²²⁶Ra), with a mean value of 5.30 Bq·kg^-1. All the human health risk assessment indices (annual intake, annual effective dose, and excess lifetime cancer risk) estimated for radionuclides associated with ingestion and inhalation of microplastics were below international safety limits. Our results demonstrated that PET can be loaded with natural and artificial radionuclides, and potentially act as a carrier to transfer radionuclides to humans, posing a new potential health risk. Increased use, mismanagement and fragmentation of plastic waste, and continued interaction of plastic waste with radioelements may lead to enhanced radiation exposure in the future.

Bacterial colonization dynamics of different microplastic types in an anoxic salt marsh sediment and impact of adsorbed polychlorinated biphenyls on the plastisphere

Plastic debris dispersed into the environment provide a substrate for microbial colonization, constituting a new human-made ecosystem called "plastisphere", and altering the microbial species distribution in aquatic, coastal and benthic ecosystems. The study aims at exploring the interaction among microplastics (MPs) made of different polymers, a persistent organic contaminant (polychlorinated biphenyls, PCBs), and the environmental microbial communities, in an anoxic marine sediment. Plastic pellets were incubated in the field in a salt marsh anoxic sediment, to observe the stages of plastisphere formation, by quantitative PCR and 16S rRNA gene sequencing, and PCB dechlorination activity on the MPs surface. Microbes from the sediment rapidly colonized the different microplastics types, with PVC recruiting a peculiar community enriched in sulfate-reducing bacteria. The composition of the plastisphere varied along the 1-year incubation possibly in response either to warmer temperatures in spring-summer or to microhabitat's changes due to the progressive plastic surface weathering. Even if PCB contaminated MPs were able to recruit potentially dehalogenating taxa, actual dechlorination was not detectable after 1 year. This suggests that the concentration of potentially dehalorespiring bacteria in the natural environment could be too low for the onset of the dechlorination process on MP-sorbed contaminants. Our study, which is among very few available longitudinally exploring the plastisphere composition in an anoxic sediment context, is the first exploring the fate and possible biodegradation of persistent organic pollutants sorbed on MPs reaching the seafloor.

Microplastics in sewage sludge: Distribution, toxicity, identification methods, and engineered technologies

Microplastic pollution is becoming a global challenge due to its long-term accumulation in the environment, causing adverse effects on human health and the ecosystem. Sludge discharged from wastewater treatment plants (WWTPs) plays a critical role as a carrier and primary source of environmental microplastic contamination. A significantly average microplastic variation between 1000 and 301,400 particles kg^-1 has been reported in the sludge samples. In recent years, advanced technologies have been successfully applied to address this issue, including adsorption, advanced oxidation processes (AOPs), and membrane bioreactors (MBRs). Adsorption technologies are essential to utilizing novel adsorbents (e.g., biochar, graphene, zeolites) for effectively removing MPs. Especially, the removal efficiency of polymer microspheres from an aqueous solution by Mg/Zn modified magnetic biochars (Mg/Zn-MBC) was obtained at more than 95%. Also, advanced oxidation processes (AOPs) are widely applied to degrade microplastic contaminants, in which photocatalytic by semiconductors (e.g., TiO₂ and ZnO) is a highly suitable approach to promote the degradation reactions owing to strongly hydroxyl radicals (OH*). Biological degradation-aided microorganisms (e.g., bacterial and fungal strains) have been reported to be suitable for removing microplastics. Yet, it was affected by biotic and abiotic factors of the environmental conditions (e.g., pH, light, temperature, moisture, bio-surfactants, microorganisms, enzymes) as well as their polymer characteristics, i.e., molecular weight, functional groups, and crystallinity. Notably, membrane bioreactors (MBRs) showed the highest efficiency in removing up to 99% microplastic particles and minimizing their contamination in sewage sludge. Further, MBRs illustrate the suitability for treating high-strength compounds, e.g., polymer debris and microplastic fibers from complex industrial wastewater. Finally, this study provided a comprehensive understanding of potential adverse risks, transportation pathways, and removal mechanisms of microplastic, which full-filled the knowledge gaps in this field.

Nano/microplastics: Fragmentation, interaction with co-existing pollutants and their removal from wastewater using membrane processes

NANO: and microplastic (NP/MP) is one of the most challenging types of micropollutants, coming from either direct release or degradation of plastic items into ecosystems. NP/MP can adsorb hazardous pollutants (such as heavy metals and pharmaceutical compounds) and pathogens onto their surface that are consumed by humans, animals, and aquatic living organisms. This paper presents the interaction of NP/MP with other pollutants in the water environment and mechanisms involved to enable the ultimate fate of NP/MP as well as the effectiveness of metal-organic frame (MOF)-based membrane over conventional membrane processes for NP/MP removal. It is found that conventional membranes could remove MPs when their size is usually more than 1000 nm, but they are ineffective in removing NPs. These NPs have potentially greater health impacts due to their greater surface area. MOF-based membrane could effectively remove both NP and MP due to its large porous structure, high adsorption capacity, and low density. This paper also discusses some challenges associated with MOF-based membranes for NP/MP removal. Finally, we conclude a specific MOF-based ultrafiltration membrane (ED-MIL-101 (Cr)) that can potentially remove both negative and positive charged NP/MP from wastewater by electrostatic attraction and repulsion force with efficient water permeability.

Bioplastics: known effects and potential consequences to marine and estuarine ecosystem services

Bioplastics have been suggested as more sustainable alternatives to conventional, petroleum-based plastics. In this work, the available studies comparing effects of biopolymers and petroleum-based plastics were reviewed to improve the knowledge on the sustainability of biobased polymers, providing a benchmark regarding their ecotoxicological effects, as well as to highlight research priorities in this field. The literature review shows that, only a small number of the available biopolymers have been tested highlighting the need for more research diversifying the tested polymers. Overall, the available studies support the idea that bioplastics are likely to cause physiological impairments (feeding, reproduction, or locomotion) as well as cellular (proteome and enzyme activity) effects on biota. Furthermore, the studies on bioplastic degradation under realistic conditions report changes in water and sediment quality, which may also have consequences to biota. It is evident that some reservations must be kept regarding conventional plastics substitutions by bioplastics.

Multi-endpoint effects of derelict tubular mussel plastic nets on Tigriopus fulvus

Microplastic debris from direct and indirect human activities is considered a major threat to the marine biodiversity mainly due to its abundance, durability, persistence, and ability to accumulate contaminants from the environment. Derelict tubular plastic nets of various colours (blue (BN), yellow (YN), green (GN), pink (PN), and white (WN) net), used to distinguish mussel farming owners, were collected by scuba-dive from the Mar Piccolo of Taranto (Ionian Sea). All nets were made of polypropylene. Investigations looked for potential acute (mortality) and sub-chronic (mortality, larval development and moult release number, and adult percentage after 5-9 days) effects on Tigriopus fulvus nauplii considering both whole plastics (microplastic (MP), 50 mg/L) and leachates (12.5-100%). Acute test determined a median lethal concentration (LC50) only for BN for both MPs (107 mg/L) and leachates (50.1%). The prolonged exposure (5 days) to microplastics did not affect the T. fulvus survival. After 9 days, YN and BN decreased of approximately 100% larval development.

Assessment of metals associated with virgin pre-production and freshwater microplastics collected by an Italian river

Recently, microplastics (MPs) have been detected in almost all environmental matrices (water, soil, air, biota). Their presence is of concern due to high environmental persistence and their ability to release or bind pollutants. In light of this, the present work aimed to quantify a poorly studied pollutant category associated with MPs: metals. This analysis was conducted on virgin MPs, used as raw materials in the plastics' production process and on environmental MPs taken from the Ofanto river in Southern Italy. The MP samples were initially grouped for colour, shape and ageing and following mineralised by a microwave digestor. The metals and metalloids Pb, Ba, Sb, Sn, Cd, Mo, Se, Zn, Cu, Ni, Co, Cr, Fe, Mn, Ti, Al, V, Ca, K, Mg, Na were subsequently quantified with ICP-MS. All the analysed elements were found on both types of samples (virgin and environmental MPs), with higher concentrations detected on environmental samples (above 14,400 μg/g^-1) rather than on pristine ones (above 5000 μg/g^-1). Many of these inorganic compounds are probably adsorbed by the surrounding environment, and others are intentionally added during the plastic production process to improve their properties (e.g. additives). Noticeable differences were detected concerning the metal's distribution and amount observed in the two types of MP particles analysed. Moreover, trace element concentrations were also linked to the colour and shape of the environmental particles analysed. Most abundant levels of metals were quantified on aged black fragments, followed by coloured and transparent fragments and black pellets. Our concluding remarks underline the role of MPs as a vehicle for the transport of metals, with significant differences between the high abundance of these pollutants examined in our particles collected in a freshwater environment and the significantly lower concentrations revealed previously in marine MPs.

Recovery of value-added products from biowaste: A review

This review provides an update on the state-of-the art technologies for the valorization of solid waste and its mechanism to generate various bio-products. The organic content of these wastes can be easily utilized by the microbes and produce value-added compounds. Microbial fermentation techniques can be utilized for developing waste biorefinery processes. The utilization of lignocellulosic and plastics wastes for the generation of carbon sources for microbial utilization after pre-processing steps will make the process a multi-product biorefinery. The C1 and C2 gases generated from different industries could also be utilized by various microbes, and this will help to control global warming. The review seeks to expand expertise about the potential application through several perspectives, factors influencing remediation, issues, and prospects.

Ecotoxicity of Polyvinylidene Difluoride (PVDF) and Polylactic Acid (PLA) Microplastics in Marine Zooplankton

The aim of this study was to investigate the ecotoxicity of polyvinylidene difluoride (PVDF) and polylactic acid (PLA) microplastics (MPs) in two marine zooplankton: the crustacean Artemia franciscana and the cnidarian Aurelia sp. (common jellyfish). To achieve this goal, (i) MP uptake, (ii) immobility, and (iii) behavior (swimming speed, pulsation mode) of crustacean larval stages and jellyfish ephyrae exposed to MPs concentrations (1, 10, 100 mg/L) were assessed for 24 h. Using traditional and novel techniques, i.e., epifluorescence microscopy and 3D holotomography (HT), PVDF and PLA MPs were found in the digestive systems of the crustaceans and in the gelatinous tissue of jellyfish. Immobility was not affected in either organism, while a significant behavioral alteration in terms of pulsation mode was found in jellyfish after exposure to both PVDF and PLA MPs. Moreover, PLA MPs exposure in jellyfish induced a toxic effect (EC50: 77.43 mg/L) on the behavioral response. This study provides new insights into PLA and PVDF toxicity with the potential for a large impact on the marine ecosystem, since jellyfish play a key role in the marine food chain. However, further investigations incorporating additional species belonging to other trophic levels are paramount to better understand and clarify the impact of such polymers at micro scale in the marine environment. These findings suggest that although PVDF and PLA have been recently proposed as innovative and, in the case of PLA, biodegradable polymers, their effects on marine biota should not be underestimated.

Micro- and nanoplastics released from biodegradable and conventional plastics during degradation: Formation, aging factors, and toxicity

The use of biodegradable plastics may solve the pollution caused by conventional plastics in the future. However, microplastics and nanoplastics are produced during the aging process of biodegradable plastics. This work evaluated the formation of secondary microplastics and nanoplastics and the effects of aging factors (UV radiation and mechanical forces) during the degradation processes of various biodegradable plastics (poly(butylene adipate co-terephtalate) (PBAT), poly(butylene succinate) (PBS), and polylactic acid (PLA)) and conventional plastics (polyethylene (PE), polystyrene (PS), and polyvinyl chloride (PVC)). This study also assessed the combined toxicity of secondary microplastics and Triclosan (TCS) on Tigriopus japonicas. The results showed that PLA and PBS could produce many microplastics. Most secondary microplastics were smaller than 50 μm. Primary pellets were more likely to generate microplastics through mechanical degradation than via photooxidation. In contrast, PBAT/PLA and PE bags were more likely to form microplastics through photooxidation than mechanical degradation. The secondary microplastics did not affect the survival of T. japonicas and the toxicity of TCS. This study highlights that risk assessment of biodegradable plastics, especially secondary microplastics, and nanoplastics, should be assessed in future studies.

Plastic leachates: Bridging the gap between a conspicuous pollution and its pernicious effects on marine life

With 4 to 12 million tons of plastic entering the marine environment each year, plastic pollution has become one of the most ubiquitous sources of pollution of the Anthropocene threatening the marine environment. Beyond the conspicuous physical damages, plastics may release a cocktail of harmful chemicals, i.e. monomers, additives and persistent organic pollutants. Although known to be highly toxic, plastic leachates seemingly appear, however, as the "somewhat sickly child" of the plastic pollution literature. We reviewed the only 26 studies investigating the impact of plastic leachates on marine microbes and invertebrates, and concluded that the observed effects essentially depend on the species, polymer type, plastic composition, accumulated contaminants and weathering processes. We identified several gaps that we believe may hamper progress in this emerging area of research and discussed how they could be bridged to further our understanding of the effects of the compounds released by plastic items on marine organisms. We first stress the lack of a consensus on the use of the term 'leachate', and subsequently introduce the concepts of primary and secondary leachates, based on the intrinisic or extrinsic origin of the products released in bulk seawater. We discuss how methodological inconsistencies and the discrepancy between the polymers used in experiments and their abundance in the environment respectively limit comparison between studies and a comprehensive assessment of the effects leachate may actually have in the ocean. We also discuss how the imbalanced in the variety of both organisms and polymers considered, the mostly unrealistic concentrations used in laboratory experiments, and the lack of investigation on key ecosystem engineers may considerably narrow the spectrum of our understanding of the plastic leachates' effects. We finally discuss how increasing multi-disciplinarity through collaborations between different research fields may benefit to an area of research which is still in its early infancy.

Molecular interactions of polyvinyl chloride microplastics and beta-blockers (Diltiazem and Bisoprolol) and their effects on marine meiofauna: Combined in vivo and modeling study

The ecotoxicological effects of beta-blockers (i.e. Diltiazem and Bisoprolol) and their interactions with the microplastic polyvinyl chloride on marine meiofauna were tested in laboratory microcosms. An experimental factorial design was applied, using meiobenthic fauna collected from the Old Harbor of Bizerte (NE Tunisia), but with a main focus on the nematode communities. The meiobenthic invertebrates were exposed to two concentrations of Diltiazem and Bisoprolol, of 1.8 µg.L^-1 and 1.8 mg.L^-1, respectively, and one concentration of polyvinyl chloride (i.e. 20 mg.kg^-1), separately and mixed. The overall meiofauna abundance was significantly reduced in all treatments, mainly that of polychaetes and amphipods. Moreover, the juveniles-gravid female ratios of the nematode communities were the lowest in the 1.8 µg.L^-1 Bisoprolol treatment and for the 1.8 mg.L^-1 mixture of Diltiazem and microplastics, suggesting that different dosages influence the maturity status of the examined species. The demographic results were also supported by in silico approach. The simulation of molecular interactions revealed acceptable binding affinities (up to -8.1 kcal/mol) and interactions with key residues in the germ line development protein 3 and sex-determining protein from Coenorhabditis elegans. Overall, the experimental outcome strongly indicates synergistic interactions among the beta-blockers Diltiazem and Bisoprolol and the microplastic polyvinyl chloride on marine nematode communities.

Environmental contamination by microplastics originating from textiles: Emission, transport, fate and toxicity

Microplastic (MP) pollution has become a global concern in terms of its environmental abundance and potential detrimental effects. Fibrous microplastics (FMPs) released from synthetic textiles are believed to contribute significantly to environmental MP pollution. This review provides an overview of current knowledge relating to the environmental impact of FMPs through a summary and discussion of (1) the concentrations in different environmental compartments including water, soil and air, (2) emission from wastewater treatment plants: via effluent discharges to waters and via sludge to land, (3) environmental transport and fate, and (4) toxicity and associated effects. How the properties of FMPs influence these aspects is discussed and their behaviour is compared to MPs of other shapes. We have summarised the Environmental Concentrations and derived Predicted No-Effect Concentrations for a preliminary risk assessment of FMPs by extrapolating the risk quotient for each respective environmental compartment. The uncertainties surrounding current assessment methods are discussed. In particular we address the need to improve determination of exposure levels and to better characterise the effects of FMPs. We conclude by presenting topics for future studies to address, which will improve our still limited understanding of the interactions between FMPs and the environment.

Challenges and opportunities in sustainable management of microplastics and nanoplastics in the environment

The accumulation of microplastics (MPs) and nanoplastics (NPs) in terrestrial and aquatic ecosystems has raised concerns because of their adverse effects on ecosystem functions and human health. Plastic waste management has become a universal problem in recent years. Hence, sustainable plastic waste management techniques are vital for achieving the United Nations Sustainable Development Goals. Although many reviews have focused on the occurrence and impact of micro- and nanoplastics (MNPs), there has been limited focus on the management of MNPs. This review first summarizes the ecotoxicological impacts of plastic waste sources and issues related to the sustainable management of MNPs in the environment. This paper then critically evaluates possible approaches for incorporating plastics into the circular economy in order to cope with the problem of plastics. Pollution associated with MNPs can be tackled through source reduction, incorporation of plastics into the circular economy, and suitable waste management. Appropriate infrastructure development, waste valorization, and economically sound plastic waste management techniques and viable alternatives are essential for reducing MNPs in the environment. Policymakers must pay more attention to this critical issue and implement appropriate environmental regulations to achieve environmental sustainability.

Adsorption of environmental contaminants on micro- and nano-scale plastic polymers and the influence of weathering processes on their adsorptive attributes

Increases in plastic-related pollution and their weathering can be a serious threat to environmental sustainability and human health, especially during the present COVID-19 (SARS-CoV-2 coronavirus) pandemic. Planetary risks of plastic waste disposed from diverse sources are exacerbated by the weathering-driven alterations in their physical-chemical attributes and presence of hazardous pollutants mediated through adsorption. Besides, plastic polymers act as vectors of toxic chemical contaminants and pathogenic microbes through sorption onto the 'plastisphere' (i.e., plastic-microbe/biofilm-environment interface). In this review, the effects of weathering-driven alterations on the plastisphere are addressed in relation to the fate/cycling of environmental contaminants along with the sorption/desorption dynamics of micro-/nano-scale plastic (MPs/NPs) polymers for emerging contaminants (e.g., endocrine-disrupting chemicals (EDCs), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), pharmaceuticals and personal care products (PPCPs), and certain heavy metals). The weathering processes, pathways, and mechanisms governing the adsorption of specific environmental pollutants on MPs/NPs surface are thus evaluated in relation to the physicochemical alterations based on several kinetic and isotherm studies. Consequently, the detailed evaluation on the role of the complex associations between weathering and physicochemical properties of plastics should help us gain a better knowledge with respect to the transport, behavior, fate, and toxicological chemistry of plastics along with the proper tactics for their sustainable remediation.

Rogue one: A plastic story

Plastic comprises of variety of polymers and has many applications, but the waste generated by plastic pose threat to environment and marine life. Plastic can be classified into two types: thermoplastics and thermosetting and are divided into 7 different categories: (Polyethylene Terephthalate [PETE], High-Density Polyethylene [HDPE], Polyvinyl Chloride [PVC], Low-Density Polyethylene [LDPE], Polypropylene [PP], Polystyrene or Styrofoam [PS] & Polycarbonate or ABS [others]). To curb the deleterious effects of plastic waste various methods have been devised and utilized that include chemical, physical and biological treatments. One of the aspects primarily focused by the researchers is the phenomenon of biodegradation and there are many microorganisms (bacteria) that have the ability to carry out this particular process. These bacteria assist biodegradation by production of several enzymes like PETases and MHETases. There are few microorganisms that have been listed which cannot be applied for industrial use due to its low biodegradation capacity. To overcome this problem, PHA is one of the alternatives to replace the synthetic plastic due to its high degrading capacity.

Adsorption properties and influencing factors of Cu(II) on polystyrene and polyethylene terephthalate microplastics in seawater

As an emerging contamination in the ocean, microplastics can act as effective vectors of pollutants, the ecological risks caused by the combined pollution of microplastics and other pollutants have attracted growing attention. In this work, Copper (Cu(II)) was chosen as the classic pollutant, polystyrene (PS) and polyethylene terephthalate (PET) pellets were used as the typical marine microplastics, the adsorption performance of Cu(II) on PS and PET beads was investigated by adsorption kinetics and isotherm experiments, and other influencing conditions, such as pH, salinity, coexisting heavy metals ions and aging treatment, were evaluated. The results indicated that the adsorption behavior of Cu(II) on PS and PET was spontaneous and endothermic in the simulated seawater environment, and the batch experimental data can be effectively described by pseudo-second-order model and Freundlich isothermal model. Besides, the adsorption capacity of microplastics for Cu(II) was the best at pH 7, the change of salinity had no obvious effect on the adsorption in the natural marine environment. Moreover, co-existence of lead (Pb(II)) exhibited evident impacts on Cu(II) sorption onto PS and PET, which confirmed the adsorption competition effect between them. Additionally, high temperature aging treatment of microplastics in different environments for different duration time could obviously affect the properties of microplastics. It was found that the microplastics after being exposed to high temperature environment in the air for 168 h showed relatively stronger adsorption amount for Cu(II). In summary, these findings suggested that electrostatic interaction and distributed diffusion mechanisms may be the main mechanisms of adsorption, while no new functional groups were generated after the adsorption, indicating that physisorption may dominate the adsorption performance of PS and PET pellets for Cu(II). This study provides supplementary insights into the role of microplastics as carriers of heavy metals in the marine environment.

Biodegradable and conventional microplastics posed similar toxicity to marine algae Chlorella vulgaris

It has been demonstrated that some conventional microplastics (CMPs) have toxicities to organisms, however, whether biodegradable microplastics (BMPs) have similar potential risks to marine ecosystems remains to be elucidated. Therefore, this study aimed to investigate i) the effects of CMPs (i. e., micro-sized polyethylene (mPE) and polyamide (mPA)) on marine algae Chlorella vulgaris; and ii) the potential effects of BMPs (i.e., micro-sized polylactic acid (mPLA) and polybutylene succinate (mPBS)) on C. vulgaris. The results showed that either CMPs or BMPs inhibited the growth of microalgae compared with the control. The maximum inhibition ratio of the four types of MPs on C. vulgaris were 47.24% (mPE, 1 000 mg/L), 40.36% (mPA, 100 mg/L), 47.95% (mPLA, 100 mg/L) and 34.25% (mPBS, 100 mg/L), respectively. Among them, mPLA showed the strongest inhibitory effect on the growth of C. vulgaris. Interestingly, the MPs can stimulate the contents of pigments (e.g., chlorophyll a, chlorophyll b, and carotenoid), which may be acted as cellular defense to the stress induced by MPs. The results also showed that MPs stimulated the production of EPS. Under the investigated condition, the strongest inhibition on C. vulgaris was induced by mPLA, and followed by mPE, mPA, and mPBS. It was found that the factors such as the physicochemical properties of MPs (e.g., shading effect, the roughness of surface, the increase in potential), the chemical changes (i.e., the release of additives, the increase of oxidative stress) contributed to the inhibitory effects of MPs on microalgae, but the deciding factor remains to be further systematically explored.

Emerging investigator series: microplastic sources, fate, toxicity, detection, and interactions with micropollutants in aquatic ecosystems - a review of reviews

Hundreds of review studies have been published focusing on microplastics (MPs) and their environmental impacts. With the microbiota colonization of MPs being firmly established, MPs became an important carrier for contaminants to step inside the food web all the way up to humans. Thus, the continuous feed of MPs into the ecosystem has sparked a multitude of scientific concerns about their toxicity, characterization, and interactions with microorganisms and other contaminants. The reports of common subthemes have agreed about many findings and research gaps but also showed contradictions about others. To unravel these equivocal conflicts, we herein compile all the major findings and analyze the paramount discrepancies among these review papers. Furthermore, we systematically reviewed all the highlights, research gaps, concerns, and future needs. The covered focus areas of MPs' literature include the sources, occurrence, fate, existence, and removal in wastewater treatment plants (WWTPs), toxicity, interaction with microbiota, sampling, characterization, data quality, and interaction with other co-contaminants. This study reveals that many mechanisms of MPs' behavior in aquatic environments like degradation and interaction with microbiota are yet to be comprehended. Furthermore, we emphasize the critical need to standardize methods and parameters for MP characterization to improve the comparability and reproducibility of the incoming research.

Characterizing photochemical ageing processes of microplastic materials using multivariate analysis of infrared spectra

Microplastics in the environment are an emerging concern due to impacts on human and environmental health. In addition to direct effects on biota, microplastics influence the fate and distribution of trace organic contaminants through sorption and transport. Environmental weathering may influence the rate and extent of chemical sorption. Changes in the surface characteristics of four common plastics including low-density polyethylene (LDPE), high-density polyethylene (HDPE), polypropylene (PP), and polystyrene (PS) were followed under the influence of both artificial light (UV-B) and natural sunlight for up to six months. Attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectra were collected at regular intervals. Principal component analysis (PCA) of the full dataset of UV-B weathered samples (n >500 spectra) simultaneously discriminated plastic type and extent of photochemical weathering. The magnitude of PCA scores correlated with exposure time and the loadings were consistent with surface chemistry changes including photooxidation. Projecting sunlight and UV-C exposed samples onto this PCA model demonstrated that similar chemical changes occurred, albeit at different rates. The results were compared to the carbonyl index (CI) with similar weathering trends indicating PP weathered at a faster initial rate than LDPE and HDPE. We propose that a multivariate approach is more widely applicable than CI as illustrated by PS, which lacked a stable reference peak. Kinetic analysis of the time series indicated that outdoor weathering occurred 5-12 times slower than the artificial exposure used here, depending on the plastic and the light source employed. The results provide unique insights into weathering processes and the photochemical age of naturally weathered plastics.

Microplastics as a vehicle of heavy metals in aquatic environments: A review of adsorption factors, mechanisms, and biological effects

Microplastics (MPs) have recently attracted much attention due to their widespread distribution in the aquatic environment. Microplastics can act as a vector of heavy metals in the aquatic environment, causing a potential threat to aquatic organisms and human health. This review mainly summarized the occurrence of microplastics in the aquatic environment and their interaction with heavy metals. Then, we considered the adsorption mechanisms of MPs and heavy metals, and further critically discussed the effects of microplastics properties and environmental factors (e.g., pH, DOM, and salinity) on the adsorption of heavy metals. Finally, the potential risks of combined exposure of MPs and heavy metals to aquatic biota were briefly evaluated. This work aims to provide a theoretical summary of the interaction between MPs and heavy metals, and is expected to serve as a reference for the accurate assessment of their potential risks in future studies.

Determination of the pharmaceuticals-nano/microplastics in aquatic systems by analytical and instrumental methods

Pharmaceutical residues and nanoplastic and microplastic particles as emerging pollutants in the aquatic environment are a subject of increasing concern in terms of the effect on water sources and marine organisms. There is lack of information about pharmaceutical-nanoplastic and pharmaceutical-microplastic mixtures. The present study aimed to investigate the fate and effect of pharmaceutical residues and nanoplastic and microplastic particles, the results of combinations of pharmaceutical residues with nanoplastic and microplastic particles, and toxic effects of pharmaceutical residues and nanoplastic and microplastic particles. Moreover, the objective was also to introduce analytical methods for pharmaceuticals, along with instrumental techniques for nanoplastic and microplastic particles in aquatic environments and organisms. PhAC alone can affect marine environments and aquatic organisms. When pharmaceutical residues combine with nanoplastic and microplastic particles, the rate of toxicity increases, and the result of this phenomenon constitutes this kind of pollutant in wastewater. Hence, the rate of mortality in organisms enhances. This study aimed to investigate the effect of pharmaceuticals residues and nanoplastic and microplastic particles, and a mixture of pharmaceutical residues and nanoplastic and microplastic particles in aquatic biota. Another object was survey methods for recognizing pharmaceutical residues and nanoplastic and microplastic particles. The findings show that pharmaceutical residues in organisms caused cell structure damage, inflammatory response, and nerve cell apoptosis. This study aimed to investigate the effect of microplastic particles in the human food chain and their impact on human health. Moreover, this review aims to present an innovative methodology based on comprehensive analytical techniques used to determine and identify pharmaceuticals adsorbed on nano- and microplastics in aquatic ecosystems. Finally, this review addresses the knowledge gaps and provides insights into future research strategies to better understand their interactions.