Techno-economics and life-cycle assessment of biological and thermochemical treatment of bio-waste

Role of advanced cleaning and sanitation techniques in biofilm prevention on dairy equipment

Biofilm formation on dairy equipment is a persistent challenge in the dairy industry, contributing to product contamination, equipment inefficiency, and economic losses. Traditional methods such as manual cleaning and basic chemical sanitation are discussed as foundational approaches, followed by an in-depth investigation of cutting-edge technologies, including clean-in-place systems, high-pressure cleaning, foam cleaning, ultrasonic and electrochemical cleaning, dry ice blasting, robotics, nanotechnology-based agents, enzymatic cleaners, and oxidizing agents. Enhanced sanitation techniques, such as dry steam, pulsed light, acidic and alkaline electrolyzed water, hydrogen peroxide vapor, microbubble technology, and biodegradable biocides, are highlighted for their potential to achieve superior sanitation while promoting sustainability. The effectiveness, feasibility, and limitations of these methods are evaluated, emphasizing their role in maintaining dairy equipment hygiene and reducing biofilm-associated risks. Additionally, challenges, such as equipment compatibility, cost, and regulatory compliance, are addressed, along with insights into future directions and innovations, including automation, smart cleaning systems, and green cleaning solutions. This review provides a comprehensive resource for researchers, industry professionals, and policymakers aiming to tackle biofilm formation in dairy production systems and enhance food safety, operational efficiency, and sustainability.

Exploring the nexus between coastal tourism growth and eutrophication: Challenges for environmental management

Coastal tourism has witnessed rapid growth over the past two decades, often accompanied by increasing environmental concerns, particularly eutrophication in sensitive marine zones. This study explores the relationship between coastal tourism expansion and eutrophication across the Mediterranean region from 2000 to 2023 using Support Vector Machines (SVMs) as a predictive analytical model. By integrating long-term environmental monitoring data with tourism statistics, the study identifies key drivers of water quality deterioration. Results reveal that areas with intense tourism activity exhibit significantly elevated nutrient levels, with a 40 % rise in nitrogen and phosphorus concentrations and a shift in TRIX index values from mesotrophic to eutrophic conditions. SVM analysis accurately predicted eutrophication zones with over 90 % classification accuracy, highlighting seasonal peaks in degraded water quality corresponding to high tourist influx. Regions with integrated environmental management demonstrated greater ecological resilience. The findings emphasize the need for strategic planning and predictive modeling in balancing tourism development and environmental protection. Incorporating machine learning tools into coastal management can enhance early detection and targeted intervention in eutrophication-prone areas.

Eco-reliable operation based on clean environmental condition for the grid-connected renewable energy hubs with heat pump and hydrogen, thermal and compressed air storage systems

Energy hubs, with their diverse regeneration and storage sources, can engage concurrently in energy transfer and storage. It is anticipated that managing the energy of these hubs within energy networks could enhance economic, environmental, and technical metrics. This article explains how electrical and thermal network hubs manage their energy consumption in the context of the multi-criteria objectives of efficiency, sustainability, reliability of the network operator, and operation. The hubs have solar power, a bio-waste unit, and wind turbines among other sustainable energy sources. They have compressed air, heat, and hydrogen storage units installed. Thermal energy is produced by means of a heat pump from electrical energy. Combining heat and power technology is used by both the bio-waste unit and the hydrogen storage unit. Subject to the operating model and reliability restrictions of these networks, the suggested strategy seeks to reduce the overall estimated costs of energy procurement, dependability, and emissions within the designated networks. Additional constraints of the problem encompass the operational model of sources and storages, conceptualized as an energy hub. This plan takes into account uncertainties about demand, energy costs, renewable energy sources, and the availability of network equipment. Reliability is accurately predicted by scenario-based techniques to stochastic optimization. The simultaneous modeling of economic, operational, reliability, and environmental indicators as well as the evaluation of the capabilities of heat pumps, biowaste units, compressed air and hydrogen storage units, and heat pumps in the hub performance are seen to be the new aspects of this approach. In summary, numerical results validate the usefulness of the proposed approach in enhancing the technical and financial aspects of thermal and electrical networks via efficient hub energy management. The incorporation of renewable hubs, equipped with storage units and heat pumps, has led to improvements in the economic, operational, reliability, and environmental conditions by approximately 44.1%, 28-90%, 85.6%, and 72.1% respectively, in comparison to load distribution studies.

The adsorption mechanism and optimal dosage of walnut shell biochar for chloramphenicol

Biochar derived from biomass pyrolysis has proven to be an excellent material for pesticide adsorption and can be used as soil amendment for pesticide non-point pollution. However, the adsorption and desorption mechanisms for certain biochar and pesticide are still unclear. In this study, we investigated the properties of biochar derived from walnut (Juglans regia L.) shell (WSB), and used batch equilibrium method to investigate the adsorption and desorption behavior for chlorantraniliprole (CAP). The physical-chemical analysis showed that there were mainly lignin charcoal of alkyl carbon, methoxyl carbon, aromatic carbon, and carboayl carbon as the primary carbon compounds of WSB. The π - π electron donor acceptor interaction, electrostatic interaction, and hydrogen bond were the primary adsorption mechanisms of the WSB adsorption. Batch equilibrium study under 298 K showed that WSB application in the soil significantly improved the adsorption ability for CAP, and the adsorption behavior was a mono-layer adsorption process as Langmuir model fitted the adsorption isotherm data better than the Freundlich model. While Freundlich model analysis showed that WSB addition to the soil changed the isothermal adsorption line from the S style to the L style. The spontaneous degree reaction of sorbents from strong to weak was in the following order: 5%-WSB >7%-WSB >10%-WSB >1%-WSB >3%-WSB > soil > WSB, and the maximum application effect was achieved at 5 % (m/m) WSB dosage mixed with the soil. Therefore, we considered that WSB addition in soil increased its CAP adsorption capacity, and 5 % (m/m) WSB application was the best choice for CAP pollution control. These data will contribute to the adsorption mechanism and the optimal use dosage of WSB for CAP pollution control.

Study on the enhancement of low carbon-to-nitrogen ratio urban wastewater pollutant removal efficiency by adding sulfur electron acceptors

The effective elimination of nitrogen and phosphorus in urban sewage treatment was always hindered by the deficiency of organic carbon in the low C/N ratio wastewater. To overcome this organic-dependent barrier and investigate community changes after sulfur electron addition. In this study, we conducted a simulated urban wastewater treatment plant (WWTP) bioreactor by using sodium sulfate as an electron acceptor to explore the removal efficiency of characteristic pollutants before and after the addition of sulfur electron acceptor. In the actual operation of 90 days, the removal rate of sulfur electrons' chemical oxygen demand (COD), ammonia nitrogen, and total phosphorus (TP) with sulfur electrons increased to 94.0%, 92.1% and 74%, respectively, compared with before the addition of sulfur electron acceptor. Compared with no added sulfur(phase I), the reactor after adding sulfur electron acceptor(phase II) was demonstrated more robust in nitrogen removal in the case of low C/N influent. the effluent ammonia nitrogen concentration of the aerobic reactor in Pahse II was kept lower than 1.844 mg N / L after day 40 and the overall concentration of total phosphorus in phase II (0.35 mg P/L) was lower than that of phase I(0.76 mg P/L). The microbial community analysis indicates that Rhodanobacter, Bacteroidetes, and Thiobacillus, which were the predominant bacteria in the reactor, may play a crucial role in inorganic nitrogen removal, complex organic degradation, and autotrophic denitrification under the stress of low carbon and nitrogen ratios. This leads to the formation of a distinctive microbial community structure influenced by the sulfur electron receptor and its composition. This study contributes to further development of urban low-carbon-nitrogen ratio wastewater efficient and low-cost wastewater treatment technology.

Valorization of Agriculture Residues into Value-Added Products: A Comprehensive Review of Recent Studies

Global agricultural by-products usually go to waste, especially in developing countries where agricultural products are usually exported as raw products. Such waste streams, once converted to "value-added" products could be an additional source of revenue while simultaneously having positive impacts on the socio-economic well-being of local people. We highlight the utilization of thermochemical techniques to activate and convert agricultural waste streams such as rice and straw husk, coconut fiber, coffee wastes, and okara power wastes commonly found in the world into porous activated carbons and biofuels. Such activated carbons are suitable for various applications in environmental remediation, climate mitigation, energy storage, and conversions such as batteries and supercapacitors, in improving crop productivity and producing useful biofuels.

Recent advancements in wastewater treatment via anaerobic fermentation process: A systematic review

This manuscript delves into the realm of wastewater treatment, with a particular emphasis on anaerobic fermentation processes, especially dark, photo, and dark-photo fermentation processes, which have not been covered and overviewed previously in the literature regarding the treatment of wastewater. Moreover, the study conducts a bibliometric analysis for the first time to elucidate the research landscape of anaerobic fermentation utilization in wastewater purification. Furthermore, microorganisms, ranging from microalgae to bacteria and fungi, emphasizing the integration of these agents for enhanced efficiency, are all discussed and compared. Various bioreactors, such as dark and photo fermentation bioreactors, including tubular photo bioreactors, are scrutinized for their design and operational intricacies. The results illustrated that using clostridium pasteurianum CH4 and Rhodopseudomonas palustris WP3-5 in a combined dark-photo fermentation process can treat wastewater to a pH of nearly 7 with over 90% COD removal. Also, integrating Chlorella sp and Activated sludge can potentially treat synthetic wastewater to COD, P, and N percentage removal rates of 99%,86%, and 79%, respectively. Finally, the paper extends to discuss the limitations and future prospects of dark-photo fermentation processes, offering insights into the road ahead for researchers and scientists.

Coupling hydrothermal liquefaction and anaerobic digestion for waste biomass valorization: A review in context of circular economy

In light of the substantial global production of biomass waste, effective waste management and energy recovery solutions are of paramount importance. Hydrothermal liquefaction (HTL) and anaerobic digestion (AD) have emerged as innovative techniques for converting biomass waste into valuable resources. Their integration creates a synergistic framework that mitigates inherent limitations, leading to improved efficiency, enhanced product quality, and the comprehensive utilization of biomass. This review paper investigates the integration of HTL and AD, highlighting its significance and potential benefits as well as the optimal sequencing (HTL followed by AD and AD followed by HTL). The review encompasses experimental procedures, factors influencing both sequencing options, energy recovery characterizations, final product outcomes, as well as toxicological assessments and discussions on reduction. Additionally, it delves into the transition towards a circular bioeconomy and discusses the challenges and opportunities intrinsic to these processes. The findings presented in this review offer valuable insights to shape future research in this evolving field.

Geochemical fractionation of iron in paper industry and municipal landfill soils: Ecological and health risks insights

Industrial processes and municipal wastes largely contribute to the fluctuations in iron (Fe) content in soils. Fe, when present in unfavorable amount, causes harmful effects on human, flora, and fauna. The present study is an attempt to evaluate the composition of Fe in surface soils from paper mill and municipal landfill sites and assess their potential ecological and human health risks. Geochemical fractionation was conducted to explore the chemical bonding of Fe across different fractions, i.e., water-soluble (F1) to residual (F6). Different contamination factors and pollution indices were evaluated to comprehend Fe contamination extent across the study area. Results indicated the preference for less mobile forms in the paper mill and landfill, with 26.66% and 43.46% of Fe associated with the Fe-Mn oxide bound fraction (F4), and 57.22% and 24.78% in the residual fraction (F6). Maximum mobility factor (MF) of 30.65% was observed in the paper mill, and 80.37% in the landfill. The enrichment factor (EF) varied within the range of 20 < EF < 40, signifying a high level of enrichment in the soil. The individual contamination factor (ICF) ranged from 0 to >6, highlighting low to high contamination. Adults were found to be more vulnerable towards Fe associated health risks compared to children. The Hazard Quotient (HQ) index showed the highest risk potential pathways as dermal contact > ingestion > inhalation. The study offers insights into potential Fe contamination risks in comparable environments, underscoring the crucial role of thorough soil assessments in shaping land use and waste management policies.

Enhancing biomethanation performance through co-digestion of diverse organic wastes: a comprehensive study on substrate optimization, inoculum selection, and microbial community analysis

A blend of organic municipal solid waste, slaughterhouse waste, fecal sludge, and landfill leachate was selected in different mixing ratios to formulate the best substrate mixture for biomethanation. Individual substrates were characterized, and the mixing ratio was optimized with the help of a response surface methodology tool to a value of 1:1:1:1 (with a C/N ratio of 28±0.769 and total volatile fatty acid (VFA) concentration of 2500±10.53 mg/L) to improve the overall biomethanation. The optimized blend (C/N ratio: 28.6, VFA: 2538 mg/L) was characterized for physicochemical, biological, and microbial properties and subjected to anaerobic digestion in lab-scale reactors of 1000 mL capacity with and without the addition of inoculum. The biogas yield of individual substrates and blends was ascertained separately. The observed cumulative biogas yield over 21 days from the non-inoculated substrates varied between 142±1.95 mL (24.6±0.3 ml/gVS) and 1974.5±21.72 mL (270.4±3.1 ml/gVS). In comparison, the addition of external inoculation at a 5% rate (w/w) of the substrate uplifted the minimum and maximum cumulative gas yield values to 203±9.9 mL (35.0±1.6 mL/gVS) and 3394±13.4 mL (315.3±1.2 mL/gVS), respectively. The inoculum procured from the Defence Research and Development Organisation (DRDO) was screened in advance, considering factors such as maximizing VFA production and consumption rate, biogas yield, and digestate quality. A similar outcome regarding biogas yield and digestate quality was observed for the equivalent blend. The cumulative gas yield increased from 2673±14.5 mL (373.7±2.2 mL/gVS) to 4284±111.02 mL (391.47±20.02 mL/gVS) over 21 days post-application of a similar dosage of DRDO inoculum. The 16S rRNA genomic analysis revealed that the predominant bacterial population belonged to the phylum Firmicutes, with the majority falling within the orders Clostridiales and Lactobacillales. Ultimately, the study advocates the potential of the blend mentioned above for biomethanation and concomitant enrichment of both biogas yield and digestate quality.

Life cycle assessment for evaluation of novel solvents and technologies: A case study of flavonoids extraction from Ginkgo biloba leaves

Innovative solvents such as deep eutectic solvents (DESs) and process intensification technologies assisted by ultrasound have been demonstrated to be promising pathways for enhancing solid-liquid extraction. Nevertheless, quantitative and systematic knowledge of their environmental impact is still limited. In this work, a case study of flavonoids extraction from Ginkgo biloba leaves was evaluated by using life cycle assessment (LCA) for comparison of three extraction scenarios. The first used DES as extractant (DESE), and the other two adopted ethanol, including heat reflux extraction (HRE), and ultrasound-assisted extraction (UAE). Among eight key midpoints investigated, all these from UAE were 10.0 %-80.0 % lower than from DESE and HRE except water consumption. The UAE was the eco-friendliest option due to its higher extraction yield, shorter duration and lower solvent consumption. The DESE exhibited the lowest water consumption, the highest freshwater ecotoxicity and human carcinogenic toxicity, while HRE had the highest impacts for the other 6 midpoints. Moreover, solvent production was the key contributor for all the categories. The standardized sensitivity analysis showed that the overall environmental footprint can be further decreased by 15.4 % for DESE pathways via substituting choline chloride/glycerine with choline chloride/ethylene glycol. Furthermore, all pathways using DESs had higher standardized impacts than those employing ethanol from sugarcane or wood. Replacing ethanol from maize with other feedstocks can significantly lessen the overall impacts, among which the UAE using ethanol from sugarcane demonstrated the least environmental impacts. The promotion of DESs as "green and sustainable" alternative to traditional solvents requires careful consideration.

Optimization of newly isolated Bacillus cereus α-amylase production using orange peels and crab shells and application in wastewater treatment

A newly isolated amylolytic strain was identified as Bacillus cereus spH1 based on 16S and 16-23S gene sequencing (Accession numbers OP811441.1 and OP819558, respectively), optimization strategies, using one variable at time (OVAT) and Plackett-Burman design, were employed to improve the alpha-amylase (α-amylase) production. Condition inferred revealed that the optimal physical parameters for maximum enzyme production were 30 °C, pH 7.5, and 12 h of incubation, using tryptone, malt extract, orange (Citrus sinensis) peels, crab (Portunus segnis) shells, calcium, and sodium chloride (NaCl) as culture medium. The full factorial design (FFD) model was observed to possess a predicted R2 and adjusted R2 values of 0.9788 and 0.9862, respectively, and it can effectively predict the response variables (p = 0). Following such efforts, α-amylase activity was increased 141.6-folds, ranging from 0.06 to 8.5 U/mL. The ideal temperature and pH for the crude enzyme activity were 65 °C and 7.5, respectively. The enzyme exhibited significant stability, with residual activity over 90% at 55 °C. The maltose was the only product generated during the starch hydrolysis. Moreover, the Bacillus cereus spH1 strain and its α-amylase were used in the treatment of effluents from the pasta industry. Germination index percentages of 143% and 139% were achieved when using the treated effluent with α-amylase and the strain, respectively. This work proposes the valorization of agro-industrial residues to improve enzyme production and to develop a green and sustainable approach that holds great promise for environmental and economic challenges.

Gasification of biomass for syngas production: Research update and stoichiometry diagram presentation

Gasification is a thermal process that converts organic materials into syngas, bio-oil, and solid residues. This mini-review provides an update on current research on producing high-quality syngas from biomass via gasification. Specifically, the review highlights the effective valorization of feedstocks, the development of novel catalysts for reforming reactions, the configuration of novel integrated gasification processes with an assisted field, and the proposal of advanced modeling tools, including the use of machine learning strategies for process design and optimization. The review also includes examples of using a stoichiometry diagram to describe biomass gasification. The research efforts in this area are constantly evolving, and this review provides an up-to-date overview of the most recent advances and prospects for future research. The proposed advancements in gasification technology have the potential to significantly contribute to sustainable energy production and reduce greenhouse gas emissions.

Conversion of agricultural biomass into valuable biochar and their competence on soil fertility enrichment

Globally several nations generates a large amount of biomass waste. Thus, this review focuses on the potential for converting plant biomass into nutritionally enriched useful biochar with promising properties. The use of biochar on farmland acts as both a soil fertility enhancer, improving both the physical as well as chemical characteristics of soil. The biochar availability in soil can retain minerals and water as well as considerably enhanced the soil fertility by their optimistic characteristics. Thus, this review also discuss about how biochar enhances the quality of agriculture soil and polluted soil. Since, the biochar derived from the plant residues might contain most valuable nutritional properties, which can enhance the physicochemical properties of soil and that can support the growth of plant along with the increased biomolecule content. Since, the healthy plantation can support the production of nutritionally enriched crop yield. Agriculture biochar amalgamated soil significantly improved soil beneficial microbial diversity. Beneficial microbial activity increased soil fertility and balanced the soil's physicochemical properties significantly. Such balanced soil physicochemical properties significantly enhanced plantation growth, as well as disease resistance and higher yield potential than any other fertiliser supplements for soil fertility and plant growth.

Hybrid Prediction-Driven High-Throughput Sustainability Screening for Advancing Waste-to-Dimethyl Ether Valorization

Assessing the prospective climate preservation potential of novel, innovative, but immature chemical production techniques is limited by the high number of process synthesis options and the lack of reliable, high-throughput quantitative sustainability pre-screening methods. This study presents the sequential use of data-driven hybrid prediction (ANN-RSM-DOM) to streamline waste-to-dimethyl ether (DME) upcycling using a set of sustainability criteria. Artificial neural networks (ANNs) are developed to generate in silico waste valorization experimental results and ex-ante model the operating space of biorefineries applying the organic fraction of municipal solid waste (OFMSW) and sewage sludge (SS). Aspen Plus process flowsheeting and ANN simulations are postprocessed using the response surface methodology (RSM) and desirability optimization method (DOM) to improve the in-depth mechanistic understanding of environmental systems and identify the most benign configurations. The hybrid prediction highlights the importance of targeted waste selection based on elemental composition and the need to design waste-specific DME synthesis to improve techno-economic and environmental performances. The developed framework reveals plant configurations with concurrent climate benefits (-1.241 and -2.128 kg CO2-eq (kg DME)-1) and low DME production costs (0.382 and 0.492 € (kg DME)-1) using OFMSW and SS feedstocks. Overall, the multi-scale explorative hybrid prediction facilitates early stage process synthesis, assists in the design of block units with nonlinear characteristics, resolves the simultaneous analysis of qualitative and quantitative variables, and enables the high-throughput sustainability screening of low technological readiness level processes.

Bioengineering of biowaste to recover bioproducts and bioenergy: A circular economy approach towards sustainable zero-waste environment

The inevitable need for waste valorisation and management has revolutionized the way in which the waste is visualised as a potential biorefinery for various product development rather than offensive trash. Biowaste has emerged as a potential feedstock to produce several value-added products. Bioenergy generation is one of the potential applications originating from the valorisation of biowaste. Bioenergy production requires analysis and optimization of various parameters such as biowaste composition and conversion potential to develop innovative and sustainable technologies for most effective utilization of biowaste with enhanced bioenergy production. In this context, feedstocks, such as food, agriculture, beverage, and municipal solid waste act as promising resources to produce renewable energy. Similarly, the concept of microbial fuel cells employing biowaste has clearly gained research focus in the past few decades. Despite of these potential benefits, the area of bioenergy generation still is in infancy and requires more interdisciplinary research to be sustainable alternatives. This review is aimed at analysing the bioconversion potential of biowaste to renewable energy. The possibility of valorising underutilized biowaste substrates is elaborately presented. In addition, the application and efficiency of microbial fuel cells in utilizing biowaste are described in detail taking into consideration of its great scope. Furthermore, the review addresses the significance bioreactor development for energy production along with major challenges and future prospects in bioenergy production. Based on this review it can be concluded that bioenergy production utilizing biowaste can clearly open new avenues in the field of waste valorisation and energy research. Systematic and strategic developments considering the techno economic feasibilities of this excellent energy generation process will make them a true sustainable alternative for conventional energy sources.

Critical review of biochemical pathways to transformation of waste and biomass into bioenergy

In recent years, biofuel or biogas have become the primary source of bio-energy, providing an alternative to conventionally used energy that can meet the growing energy demand for people all over the world while reducing greenhouse gas emissions. Enzyme hydrolysis in bioethanol production is a critical step in obtaining sugars fermented during the final fermentation process. More efficient enzymes are being researched to provide a more cost-effective technique during enzymatic hydrolysis. The exploitation of microbial catabolic biochemical reactions to produce electric energy can be used for complex renewable biomasses and organic wastes in microbial fuel cells. In hydrolysis methods, a variety of diverse enzyme strategies are used to promote efficient bioethanol production from various lignocellulosic biomasses like agricultural wastes, wood feedstocks, and sea algae. This paper investigates the most recent enzyme hydrolysis pathways, microbial fermentation, microbial fuel cells, and anaerobic digestion in the manufacture of bioethanol/bioenergy from lignocellulose biomass.

Swine manure treatment technologies as drivers for circular economy in agribusiness: A techno-economic and life cycle assessment approach

Anaerobic digestion has been employed as a technology capable of adding value to waste coupled with environmental impact mitigation. However, many issues need to be elucidated to ensure the systems viability based on this technology. In this sense, the present study evaluated technically, environmentally, and economically, four configurations of swine waste treatment systems focused on the promotion of decarbonization and circularity of the swine chain. For this, a reference plant, based on a compact treatment process named SISTRATES® (Portuguese acronym for swine effluent treatment system) was adopted to serve as a model for comparison and validation. The results showed the importance of prioritization of the energy recuperation routes through anaerobic digestion, providing increased economic benefits and minimizing environmental damage. Thus, the SISTRATES® configuration was the one that presented the best designs in a circular context, maximizing the recovery of energy and nutrients, along with the reduction of greenhouse gas emissions, ensuring the sustainability of the pig production chain.

Life Cycle Assessment and Its Application in Wastewater Treatment: A Brief Overview

This paper provides a brief review on wastewater treatment system and the application of life cycle assessment (LCA) for assessing its environmental performance. An extensive review regarding the geographical relevance of LCA for WWTPs, and the evaluation of sustainable wastewater treatment by LCA in both developed and developing countries are also discussed. The objective of the review is to identify knowledge gap, for the improvement of the LCA application and methodology to WWTPs. A total of 35 published articles related to wastewater treatment (WWT) and LCA from international scientific journals were studied thoroughly and summarised from 2006 to 2022. This review found that there is lack of studies concerning LCA of WWTPs that consider specific local criteria especially in the developing countries. Thus, it is important to: (1) assess the influence of seasonality (i.e., dry and wet seasons) on the environmental impact of WWT, (2) investigate environmental impacts from WWTPs in developing countries focusing on the site-specific inventory data, and (3) evaluate environmental sustainability of different processes for upgrading the wastewater treatment system. The environmental impact and cost assessment aspects are crucial for the sustainable development of WWTP. Therefore, environmental impacts must be thoroughly assessed to provide recommendation for future policy and for the water industry in determining environmental trade-offs toward sustainable development.

Recent advances in lignocellulosic and algal biomass pretreatment and its biorefinery approaches for biochemicals and bioenergy conversion

As the global demand for sustainable energy increases, lignocellulosic (such as agricultural residues, forest biomass, municipal waste, and dedicated energy crops) and algal (including macroalgae and microalgae) biomass have attracted considerable attention, because of their high availability of carbohydrates. This is a potential feedstock to produce biochemical and bioenergy. Pretreatment of biomass can disrupt their complex structure, increasing conversion efficiency and product yield. Therefore, this review comprehensively discusses recent advances in different pretreatments (physical, chemical, physicochemical, and biological pretreatments) for lignocellulosic and algal biomass and their biorefining methods. Life cycle assessment (LCA) which enables the quantification of the environmental impact assessment of a biorefinery also be introduced. Biorefinery processes such as raw material acquisition, extraction, production, waste accumulation, and waste conversion are all monitored under this concept. Nevertheless, there still exist some techno-economic barriers during biorefinery and extensive research is still needed to develop cost-effective processes.

Recent advances in biogas production using Agro-Industrial Waste: A comprehensive review outlook of Techno-Economic analysis

Agrowaste sources can be utilized to produce biogas by anaerobic digestion reaction. Fossil fuels have damaged the environment, while the biogas rectifies the issues related to the environment and climate change problems. Techno-economic analysis of biogas production is followed by nutrient recycling, reducing the greenhouse gas level, biorefinery purpose, and global warming effect. In addition, biogas production is mediated by different metabolic reactions, the usage of different microorganisms, purification process, upgrading process and removal of CO₂ from the gas mixture techniques. This review focuses on pre-treatment, usage of waste, production methods and application besides summarizing recent advancements in biogas production. Economical, technical, environmental properties and factors affecting biogas production as well as the future perspective of bioenergy are highlighted in the review. Among all agro-industrial wastes, sugarcane straw produced 94% of the biogas. In the future, to overcome all the problems related to biogas production and modify the production process.

Recent trends and advances in composting and vermicomposting technologies: A review

Composting technologies have come a long way, developing from static heaps and windrow composting to smart, artificial intelligence-assisted reactor composting. While in previous years, much attention has been paid to identifying ideal organic waste streams and suitable co-composting candidates, more recent efforts tried to determine novel process-enhancing supplements. These include various single and mixed microbial cultures, additives, bulking agents, or combinations thereof. However, there is still ample need to fine-tune the composting process in order to reduce its impact on the environment and streamline it with circular economy goals. In this review, we highlight recent advances in integrating mathematical modelling, novel supplements, and reactor designs with (vermi-) composting practices and provide an outlook for future developments. These results should serve as reference point to target adjusting screws for process improvement and provide a guideline for waste management officials and stakeholders.

Bioremediation by oil degrading marine bacteria: An overview of supplements and pathways in key processes

Oil spillage is one of the most common pollutants which brings greater economic loss and damage to the environment. The intensity and amount of the damage may vary depending on factors such as the type of oil, the location of the spill, and the climatic parameters in the area. As for any pollution management, the guidelines are Reduce, Re-use, Recover and Disposal. Amongst the other remediation processes, Bioremediation is amongst the most significant environmentally friendly and cost-effective approaches for marine biological restoration because it allows complex petroleum hydrocarbons in spilt oil to decompose completely into harmless compounds. Mainly, the necessity and essence of bioremediation were talked about. This review discussed the bacteria identified which are capable of degrading various oil related pollutants and their components. Also, it covered the various media components used for screening and growing the oil degrading bacteria and the pathways that are associated with oil degradation. This article also reviewed the recent research carried out related to the oil degrading bacteria.

Exploring drying kinetics and fate of nutrients in thermal digestion of solid organic waste

Thermal digestion has emerged as a novel technique for the rapid treatment of solid organic waste (SOW). Dehydration mechanism and fate of nutrients during the thermal digestion of the SOW were explored. A series of experiments were carried out in a specially designed laboratory-scale dehydrator to determine its drying kinetics. The statistical analysis revealed that the diffusion model predicted the dehydration profile most accurately than other models. The effective moisture diffusivity coefficient depended on the temperature and varied from 2.81 × 10^-08 m²/s to 8.68 × 10^-08 m²/s at the tested temperature range. The activation energy required for complete dehydration was found to be 26.56 kJ/mol. The artificial neural network (ANN) model was found highly efficient (R² - 0.983) in predicting the total drying time required for attaining equilibrium moisture content. The total N decreased from 2.2% to 1.81% due to evaporation of ammonical nitrogen, while the availability of P and K was increased from 0.38% to 0.43% and 1.47% to 1.75%, respectively when the temperature was increased from 110 °C to 170 °C. The thermal dehydration technique was found effective in digesting the organics and improving the bioavailability of the nutrients, which favours for its re-utilization in agriculture.

Organic waste recycling for carbon smart circular bioeconomy and sustainable development: A review

The development of sustainable and low carbon impact processes for a suitable management of waste and by-products coming from different factors of the industrial value chain like agricultural, forestry and food processing industries. Implementing this will helps to avoid the negative environmental impact and global warming. The application of the circular bioeconomy (CB) and the circular economic models have been shown to be a great opportunity for facing the waste and by-products issues by bringing sustainable processing systems which allow to the value chains be more responsible and resilient. In addition, biorefinery approach coupled to CB context could offer different solution and insights to conquer the current challenges related to decrease the fossil fuel dependency as well as increase efficiency of resource recovery and processing cost of the industrial residues. It is worth to remark the important role that the biotechnological processes such as fermentative, digestive and enzymatic conversions play for an effective waste management and carbon neutrality.

Effects of different additives and aerobic composting factors on heavy metal bioavailability reduction and compost parameters: A meta-analysis

Additives are considered a promising approach to accelerate the composting process and alleviate the dissemination of pollutants to the environment. However, nearly all previous articles have focused on the impact of additive amounts on the reduction of HMs, which may not fully represent the main factor shaping HMs bioavailability status during composting. Simultaneously, previous reviews only explored the impacts, speciation, and toxicity mechanism of HMs during composting. Hence, a global-scale meta-analysis was conducted to investigate the response patterns of HMs bioavailability and compost parameters to different additives, composting duration, and composting factors (additive types, feedstock, bulking agents, and composting methods) by measuring the weighted mean values of the response ratio "[ln (RR)]" and size effect (%). The results revealed that additives significantly lessened HMs bioavailability by ≥ 40% in the final compost products than controls. The bioavailability decline rates were -40%, -60%, -57%, -55%, -42%, and -44% for Zn, Pb, Ni, Cu, Cr, and Cd. Simultaneously, additives significantly improved the total nitrogen (TN) (+16%), pH (+5%), and temperature (+5%), and decreased total organic carbon (TOC) (-17%), moisture content (MC) (-18%), and C/N ratio (-19%). Furthermore, we found that the prolongation of composting time significantly promoted the effect of additives on declining HMs bioavailability (p < 0.05). Nevertheless, increasing additive amounts revealed an insignificant impact on decreasing the HMs bioavailability (p > 0.05). Eventually, using zeolite as an additive, chicken manure as feedstock, sawdust as a bulking agent, and a reactor as composting method had the most significant reduction effect on HMs bioavailability (p < 0.05). The findings of this meta-analysis may contribute to the selection, modification, and application of additives and composting factors to manage the level of bioavailable HMs in the compost products.

Black soldier fly larvae for organic manure recycling and its potential for a circular bioeconomy: A review

Livestock farming and its products provide a diverse range of benefits for our day-to-day life. However, the ever-increasing demand for farmed animals has raised concerns about waste management and its impact on the environment. Worldwide, cattle produce enormous amounts of manure, which is detrimental to soil properties if poorly managed. Waste management with insect larvae is considered one of the most efficient techniques for resource recovery from manure. In recent years, the use of black soldier fly larvae (BSFL) for resource recovery has emerged as an effective method. Using BSFL has several advantages over traditional methods, as the larvae produce a safe compost and extract trace elements like Cu and Zn. This paper is a comprehensive review of the potential of BSFL for recycling organic wastes from livestock farming, manure bioconversion, parameters affecting the BSFL application on organic farming, and process performance of biomolecule degradation. The last part discusses the economic feasibility, lifecycle assessment, and circular bioeconomy of the BSFL in manure recycling. Moreover, it discusses the future perspectives associated with the application of BSFL. Specifically, this review discusses BSFL cultivation and its impact on the larvae's physiology, gut biochemical physiology, gut microbes and metabolic pathways, nutrient conservation and global warming potential, microbial decomposition of organic nutrients, total and pathogenic microbial dynamics, and recycling of rearing residues as fertilizer.

Microbial biotechnology approaches for conversion of pineapple waste in to emerging source of healthy food for sustainable environment

One of the most significant and difficult jobs in food sustainability, is to make use of waste in the vegetable and fruit processing sectors. The discarded fruits along with their waste materials, is anticipated to have potential use for further industrial purposes via extraction of functional ingredients, extraction of bioactive components, fermentation. As a result of its abundant availability, simplicity and safe handling, and biodegradability, pineapple waste is now the subject of extensive research. It is regarded as a resource for economic development. This vast agro-industrial waste is being investigated as a low-cost raw material to produce a variety of high-value-added goods. Researchers have concentrated on the exploitation of pineapple waste, particularly for the extraction of prebiotic oligosaccharides as well as bromelain enzyme, and as a low-cost source of fibre, biogas, organic acids, phenolic antioxidants, and ethanol. Thus, this review emphasizes on pineapple waste valorisation approaches, extraction of bioactive and functional ingredients together with the advantages of pineapple waste to be used in many areas. From the socioeconomic perspective, pineapple waste can be a new raw material source to the industries and may potentially replace the current expensive and non-renewable sources. This review summarizes various approaches used for pineapple waste processing along with several important value-added products gained which could contribute towards healthy food and a sustainable environment.

Enhanced biogas production from food waste and activated sludge using advanced techniques - A review

Biogas generation using food waste anaerobic co-digestion with activated sludge provides a cleaner addressable system, an excellent solution to global challenges, the increasing energy demands, fuel charges, pollution and wastewater treatment. Regardless of the anaerobic digestate end product values, the technology lacks efficiency and process instability due to substrate irregularities. Process parameters and substrate composition, play a vital role in the efficiency and outcome of the system. Intrinsic biochar properties such as pore size, specific surface properties and cation exchange capacity make it an ideal additive that enriches microbial functions and enhances anaerobic digestion. The pretreatment and co-digestion of food waste and activated sludge are found to be significant for efficient biogas generation. The advantages, drawbacks, limitations, and technical improvements are covered extensively in the present review besides the recent advancement in the anaerobic digestion system.

Influences of Biochar on Bioremediation/Phytoremediation Potential of Metal-Contaminated Soils

A number of anthropogenic and weathering activities accumulate heavy metals in soils, causing adverse effects on soil characteristics, microbial activity (diversity), agricultural practices, and underground aquifers. Controlling soil heavy metal pollution is difficult due to its persistence in soils, resulting in the deposition and transmission into the food web via agricultural food products, ultimately affecting human health. This review critically explores the potential for remediation of metal-contaminated soils using a biochar-based responsible approach. Plant-based biochar is an auspicious bio-based residue substance that can be used for metal-polluted soil remediation and soil improvement as a sustainable approach. Plants with rapid growth and increased biomass can meet the requirements for phytoremediation in large quantities. Recent research indicates significant progress in understanding the mechanisms of metal accumulation and contaminant movement in plants used for phytoremediation of metal-contaminated soil. Excessive contamination reduces plant biomass and growth, which has substantial hyperaccumulating possibilities and is detrimental to the phytoremediation process. Biochar derived from various plant sources can promote the growth and phytoremediation competence of native or wild plants grown in metal-polluted soil. Carbon-enriched biochar encourages native microbial growth by neutralizing pH and providing nutritional support. Thus, this review critically discusses the influence of plant and agricultural waste-based biochar on plant phytoremediation potential in metal-contaminated soils.

Carbon-based catalyst for environmental bioremediation and sustainability: Updates and perspectives on techno-economics and life cycle assessment

Global rise in the generation of waste has caused an enormous environmental concern and waste management problem. The untreated carbon rich waste serves as a breeding ground for pathogens and thus strategies for production of carbon rich biochar from waste by employing different thermochemical routes namely hydrothermal carbonization, hydrothermal liquefaction and pyrolysis has been of interest by researchers globally. Biochar has been globally produced due to its diverse applications from environmental bioremediation to energy storage. Also, several factors affect the production of biochar including feedstock/biomass type, moisture content, heating rate, and temperature. Recently the application of biochar has increased tremendously owing to the cost effectiveness and eco-friendly nature. Thus this communication summarized and highlights the preferred feedstock for optimized biochar yield along with the factor influencing the production. This review provides a close view on biochar activation approaches and synthesis techniques. The application of biochar in environmental remediation, composting, as a catalyst, and in energy storage has been reviewed. These informative findings were supported with an overview of lifecycle and techno-economical assessments in the production of these carbon based catalysts. Integrated closed loop approaches towards biochar generation with lesser/zero landfill waste for safeguarding the environment has also been discussed. Lastly the research gaps were identified and the future perspectives have been elucidated.

Catalytic pyrolysis of lignocellulosic biomass for bio-oil production: A review

Catalytic pyrolysis has been widely explored for bio-oil production from lignocellulosic biomass owing to its high feasibility and large-scale production potential. The aim of this review was to summarize recent findings on bio-oil production through catalytic pyrolysis using lignocellulosic biomass as feedstock. Lignocellulosic biomass, structural components and fundamentals of biomass catalytic pyrolysis were explored and summarized. The current status of bio-oil yield and quality from catalytic fast pyrolysis was reviewed and presented in the current review. The potential effects of pyrolysis process parameters, including catalysts, pyrolysis conditions, reactor types and reaction modes on bio-oil production are also presented. Techno-economic analysis of full-scale commercialization of bio-oil production through the catalytic pyrolysis pathway was reviewed. Further, limitations associated with current practices and future prospects of catalytic pyrolysis for production of high-quality bio-oils were summarized. This review summarizes the process of bio-oil production from catalytic pyrolysis and provides a general scientific reference for further studies.

Emerging trends of microbial technology for the production of oligosaccharides from biowaste and their potential application as prebiotic

Oligosaccharides are the sugars made up of 3-10 saccharides units and one of the classes of prebiotics obtained from various biowastes. These biowastes could include rice straw, husk, spent coffee grounds, sugarcane bagasse, spent tea leaves, fruits and vegetables peel, corn stalk, corn stover, deoiled meals and brewer's spent grains etc., which can be used as a resource for oligosaccharides production. This review aims to provide a comprehensive overview of the suitability of different biowaste resources for oligosaccharide production followed by critical analysis of the recent updates and production methods. The review also discusses the tremendous prebiotic potential of oligosaccharides in food applications with prospects for further advancements in the field.

A critical review on exploitation of agro-industrial biomass as substrates for the therapeutic microbial enzymes production and implemented protein purification techniques

Annually, a huge amount of waste is generated by the industries that use agricultural biomass. Researchers have looked into employing this cheap and renewable agro-biomass as a substrate for enzyme production via fermentation processes to meet the ever-increasing worldwide need. Although there are a number of sources for enzyme extraction, microbial sources have dominated industrial sectors due to their easy availability and rapid growth. Microbial enzymes are currently used in a variety of industries, including pharmaceuticals, food, biofuels, textiles, paper, detergents, and so on, and using these nutritious feedstocks not only reduces production costs but also helps to reduce environmental concerns. The present review focuses on the therapeutic microbial enzymes produced using different agro-industrial biomass as raw materials, with down-streaming techniques for obtaining a final pure product. Additionally, the article also discussed biomass pretreatment processes, including physical, chemical and biological. The type of pretreatment method to be used is mostly governed by the intended use of the major molecular components of biomass (cellulose, hemicelluloses and lignin). Finally, purification challenges are included. All of this information will be useful in the industrial synthesis of high-purity targeted enzymes if the crucial aspects that have been discussed are taken into account.

Genetic manipulation strategies for ethanol production from bioconversion of lignocellulose waste

Lignocellulose waste was served as promising raw material for bioethanol production. Bioethanol was considered to be a potential alternative energy to take the place of fossil fuels. Lignocellulosic biomass synthesized by plants is regenerative, sufficient and cheap source for bioethanol production. The biotransformation of lignocellulose could exhibit dual significance-reduction of pollution and obtaining of energy. Some strategies are being developing and increasing the utilization of lignocellulose waste to produce ethanol. New technology of bioethanol production from natural lignocellulosic biomass is required. In this paper, the progress in genetic manipulation strategies including gene editing and synthetic genomics for the transformation from lignocellulose to ethanol was reviewed. At last, the application prospect of bioethanol was introduced.

Engineered biochar: A multifunctional material for energy and environment

Biochar is a stable carbon-rich product loaded with upgraded properties obtained by thermal cracking of biomasses in an oxygen-free atmosphere. The pristine biochar is further modified to produce engineered biochar via various physical, mechanical, and chemical methods. The hasty advancement in engineered biochar synthesis via different technologies and their application in the field of energy and environment is a topical issue that required an up-to-date review. Therefore, this review deals with comprehensive and recent mechanistic approaches of engineered biochar synthesis and its further application in the field of energy and the environment. Synthesis and activation of engineered biochar via various methods has been deliberated in brief. Furthermore, this review systematically covered the impacts of engineered biochar amendment in the composting process, anaerobic digestion (AD), soil microbial community encouragement, and their enzymatic activities. Finally, this review provided a glimpse of the knowledge gaps and challenges associated with application of engineered biochar in various fields, which needs urgent attention in future research.

Recent advances, current issues and future prospects of bioenergy production: A review

With the immense potential of bioenergy to drive carbon neutrality and achieve the climate targets of the Paris Agreement, this paper aims to present the recent advances in bioenergy production as well as their limitations. The novelty of this review is that it covers a comprehensive range of strategies in bioenergy production and it provides the future prospects for improvement. This paper reviewed more than 200 peer-reviewed scholarly papers mainly published between 2010 and 2021. Bioenergy is derived from biomass, which, through thermochemical and biochemical processes, is converted into various forms of biofuels. This paper reveals that bioenergy production is temperature-dependent and thermochemical processes currently have the advantage of higher efficiency over biochemical processes in terms of lower response time and higher conversion. However, biochemical processes produce more volatile organic compounds and have lower energy and temperature requirements. The combination of the two processes could fill the shortcomings of a single process. The choices of feedstock are diverse as well. In the future, it can be anticipated that continuous technological development to enhance the commercial viability of different processes, as well as approaches of ensuring their sustainability, will be among the main aspects to be studied in greater detail.

Current state of the art biotechnological strategies for conversion of watermelon wastes residues to biopolymers production: A review

Poly-3-hydroxyalkanoates (PHA) are biodegradable and compostable polyesters. This review is aimed to provide a unique approach that can help think tanks to frame strategies aiming for clean technology by utilizing cutting edge biotechnological advances to convert fruit and vegetable waste to biopolymer. A PHA manufacturing method based on watermelon waste residue that does not require extensive pretreatment provides a more environmentally friendly and sustainable approach that utilizes an agricultural waste stream. Incorporating fruit processing industry by-products and water, and other resource conservation methods would not only make the manufacturing of microbial bio-plastics like PHA more eco-friendly, but will also help our sector transition to a bioeconomy with circular product streams. The final and most critical element of this review is an in-depth examination of the several hazards inherent in PHA manufacturing.

COVID-19 and industrial waste mitigation via thermochemical technologies towards a circular economy: A state-of-the-art review

The increasing awareness of waste circular economy has motivated valorization strategies for minimizing resource consumption and waste production in the private sector. With the rise of various industrial wastes and with the emergence of COVID-19 wastes, a sustainable approach is needed to mitigate the growing concern about wastes. Thermochemical treatment technologies in the form of direct combustion, torrefaction, pyrolysis, and gasification have been identified to have vital roles in the value-creation of various waste streams. Moreover, the alignment of thermochemical processes for waste mitigation concerning the circular economy framework needs to be established. Accordingly, a comprehensive review of the different thermochemical treatment options for industrial and the novel COVID-19 medical wastes streams is conducted in this study. This review focuses on highlighting the instrumental role of thermochemical conversion platforms in achieving a circular economy in the industrial sector. Various strategies in waste mitigation through various thermochemical processes such as management, recovery, reduction, and treatment are discussed. The results show that thermochemical technologies are beneficial in addressing the sustainability concerns on mitigating wastes from the industrial sector and wastes brought by the COVID-19 pandemic. This also includes the current issues faced as well as future perspectives of the thermochemical conversion technologies.

Biochar regulates bacterial-fungal diversity and associated enzymatic activity during sheep manure composting

Aimed to evaluate the coexistence of bacterial and fungal diversity and their correlation with enzymatic activity in response to biochar. This study performed aerobic composting based on typical agricultural wastes of sheep manure with additive apple tree branch biochar at distinct concentration (0, 2.5, 5, 7.5, 10 and 12.5% corresponding from T1 to T6). The result demonstrated that appropriate amendment of biochar enriched bacterial diversity (1646-1686 OTUs) but interestingly decreased fungal diversity (542-630 OTUs) compared to control (1444 and 682 OTUs). Biochar addition enhanced all enzymatic activities and its correlation with bacterial was more complex than fungal community (786 and 359 connect edges). The dominant microbes comprised of Firmicutes (45.2-35.2%), Proteobacteria (14.0-17.5%), Basidiomycota (32.4-49.5%) and Ascomycota (11.3-37.5%) among all the treatments. Overall, biochar regulates the composting microenvironment by influencing the microbial diversity and associated enzymatic activities.

Gasification of municipal solid waste (MSW) as a cleaner final disposal route: A mini-review

The production of hydrogen-rich syngas from municipal solid waste (MSW) by pyrolysis/gasification is one of the most promising waste-to-energy pathways for realizing a circular bioeconomy. This mini-review provides an overview of current research and development efforts in the field, focusing on the development of syngas upgrades and novel gasification processes, with the ultimate goal of making MSW gasification a sustainable and affordable route for the final disposal of MSW. A graphical assessment protocol is proposed to support comprehension of the main reactions that are involved in the MSW gasification. MSW gasification studies are reviewed with the prospects considered to provide a reference for future work.