Quantifying the contribution of dyes to the mutagenicity of waters under the influence of textile activities

The importance of the YG1041 Salmonella strain in the mutagenicity characterization of azo dyes

Azo dyes, classified by the functional group (-NN-) are widely used in various industries. Among them, disperse dyes are particularly important because of their low cost, colour versatility, and compatibility with polyester, the most popular synthetic fiber. Because several azo dyes are known to be mutagenic and therefore potentially carcinogenic, new dyes from this class need to have their genotoxic hazard characterized. This study aimed to assess the mutagenicity of five high-purity disperse azo dyes (≥97 %) using a miniaturized, Microplate agar (MPA) version of the Salmonella/microsome assay (Ames test). The MPA with Salmonella strains YG1041, TA98, and TA100 was used to reduce the amount of dyes needed. All five dyes were mutagenic in YG1041, but only one was mutagenic with TA98, and none were positive in TA100. Based on our data and the literature reviewed, we recommend the inclusion of YG1041 in the battery of strains used to evaluate azo dyes. This work also demonstrates the efficacy of the MPA for characterizing mutagenicity of substances with small amounts of test sample.

Microcontaminants and microplastics in water from the textile sector: a review and a database of physicochemical properties, use in the textile process, and ecotoxicity data for detected chemicals

Microcontaminants (MCs) and microplastics (MPs) originating from the textile sector are today receiving a great deal of attention due to potential environmental concerns. Environmental pressures and impacts related to the textile system include not only the use of resources (e.g., water) but also the release of a wide variety of pollutants. This review's main objective is to highlight the presence of textile MCs and MPs in water, in their full path from textile factories (from raw materials to the final product) to wastewater treatment plants (WWTPs), and finally to the receiving surface waters. Their environmental fate and ecotoxicity were also addressed. Overall, more than 500 compounds were found, many of which are so called "contaminants of environmental concern" such as per- and polyfluoroalkyl substances (PFAS) and alkylphenol compounds. A database of physicochemical properties, ecotoxicity, and place of detection (specific textile process, WWTP, surface water or sediment) (classification by several international agencies) was compiled for the chemical detected. Preliminary risk assessment was conducted for those MCs for which the reported environmental concentrations exceeded the Predicted No Effect Concentration (PNEC). These chemicals were some nonylphenols, nonylphenol ethoxylates and organophosphate esters. Among MPs, polyester and nylon fibres were the most abundant. The highest concentration of MPs was reported in sludge (about 1.4 × 106 MPs per kg) compared to wastewater and surface water which showed MP concentrations at least two orders of magnitude lower. The role of transboundary contamination due to the release of chemicals from imported textile products was also assessed.

Single and combined treatment processes for rhodamine B removal by coagulation-flocculation and adsorption

In this paper, two physico-chemical methods were adopted for the removal of rhodamine B from aqueous solutions. The first one is the adsorption process using biochar derived from olive stones (OSB). Results demonstrated that the removal efficiency reached 97.79% within an equilibrium time of one hour. It was observed that the pH had no significant effect on the degradation of rhodamine B by OSB. The adsorption process was characterized by the endothermic nature, spontaneity, favorability, and disorder at the solid-liquid interface. Langmuir isotherm analysis revealed a maximum adsorption capacity of 11.82 mg g-1, and the prepared biochar could be reused for up to four cycles. For the second method, coagulation-flocculation using FeCl3 as a coagulant was investigated. The findings displayed that an increase in the dosage of FeCl3 enhanced the degradation process, with the best performance registered at a dose of 2000 mg L-1 of FeCl3. The optimum pH for this process was found to be 2. A combination approach by these two methods, starting with coagulation-flocculation and followed by adsorption, was also investigated. The results showed that the combined approach improved the removal performance compared to each process alone, with minimal doses of both coagulant and adsorbent. Thus, the combination of these two physico-chemical processes allows benefits from the advantages and reduces the disadvantages of each individual method.

Designing and applying a methodology to assess sperm cell viability and DNA damage in a model amphipod

Sperm quality is defined as the sperm cell ability to successfully fertilize eggs and allow normal embryo development⁠. Few studies explore sperm quality using aquatic invertebrates. Parhyale hawaiensis is a marine amphipod with a circumtropical distribution and considered a model for evolution, development, and ecotoxicological studies. We aimed to develop a methodology to collect sperm cells of P. hawaiensis and evaluate their viability and DNA damage (comet assay). We directly exposed the sperm cells to different mutagenic agents to optimize/develop the protocols. Then, as a proof of concept, we exposed the males to mutagenic compounds (EMS, benzo[a]pyrene (BaP), azo and anthraquinone dyes) at non-lethal concentrations verified by the proposed viability test and analyzed their sperm cells for DNA damage (comet assay). Organisms exposed to EMS presented a clear concentration response in the DNA damage response. We also showed that BaP was able to induce a statistically significant increase in DNA damage of the sperm cells. For the two dyes, although DNA damage increased, statistically differences were not observed. We believe we successfully developed a test to detect genotoxicity of chemicals in sperm cells using an invertebrate model. The protocol for sperm cell viability needs to be further explored with different chemicals to verify its utility as a toxicity endpoint. The developed genotoxicity test has the advantages to employ organisms that are easily cultivated in reduced space, use simple laboratory resources and reduced amount of material and reagents. Positive responses with this model could be used to disclose new germ cell mutagen candidates which could be further confirmed in vertebrates' systems.

Multigenerational effects of disperse blue 79 at environmentally relevant concentrations on zebrafish (Danio rerio) fecundity: An integrated approach

The brominated azo dye (BAD) Disperse Blue (DB79) is a widespread environmental pollutant. The long-term toxicological effects of DB79 and the mechanisms thereof must be understood to allow assessment of the risks of DB79 pollution. A dual-omics approach employing in silico analysis, bioinformatics, and in vitro bioassays was used to investigate the transgenerational (F0-F2) toxicity of DB79 in zebrafish at environmentally relevant concentrations and identify molecular initiating events and key events associated with DB79-induced fertility disorders. Exposure to 500 µg/L DB79 decreased fecundity in the F0 and F1 generations by > 30 % and increased the condition factor of the F1 generation 1.24-fold. PPARα/RXR and PXR ligand binding activation were found to be critical molecular initiating events associated with the decrease in fecundity. Several key events (changes in fatty acid oxidation and uptake, lipoprotein metabolism, and xenobiotic metabolism and transport) involved in lipid dysregulation and xenobiotic disposition were found to be induced by DB79 through bioinformatic annotation using dual-omics data. The biomolecular underpinnings of decreased transgenerational fertility in zebrafish attributable to BAD exposure were elucidated and novel biomolecular targets in the adverse outcome pathway framework were identified. These results will inform future studies and facilitate the development of mitigation strategies.

Deciphering the ecological impact of azo dye pollution through microbial community analysis in water-sediment microcosms

The uncontrolled release of untreated dyeing wastewater into aquatic ecosystems poses global environmental risks. It alters native microbial communities and associated ecological processes, often going unnoticed. Therefore, the influence of acid orange 7 dye (AO7) contamination on the natural microbial community was investigated using a water-sediment microcosm. Compared to sterile microcosms, complete dye decolourization in natural microcosms showed microbial communities' significance in combating xenobiotic contamination. Proteobacteria dominated the water community, whereas Firmicutes dominated the sediment. AO7 exposure induced notable shifts in the structural composition of the bacterial community in both water and sediment. Niveispirillum exhibited a marked decrease, and Pseudomonas demonstrated a notable increase. The - 9.0 log2FC in Niveispirillum, a nitrogen-fixing bacterium, from 24.4% in the control to 0.1% post-treatment, may disrupt nutrient balance, plant growth, and ecosystem productivity. Conversely, elevated levels of Pseudomonas sp. resulting from azo dye exposure demonstrate its ability to tolerate and bioremediate organic pollutants, highlighting its resilience. Functional profiling via KEGG pathway analysis revealed differential expression patterns under AO7 stress. Specifically, valine, leucine, and isoleucine degradation pathways in water decreased by 52.2%, and cysteine and methionine metabolism ceased expression entirely, indicating reduced protein metabolism and nutrient bioavailability under dye exposure. Furthermore, in sediment, glutathione metabolism ceased, indicating increased oxidative stress following AO7 infusion. However, C5-branched dibasic acid metabolism and limonene and pinene degradation were uniquely expressed in sediment. Decreased methane metabolism exacerbates the effects of global warming on aquatic ecosystems. Further, ceased-butanoate metabolic pathways reflect the textile dye wastewater-induced adverse impact on ecological processes, such as organic matter decomposition, energy flow, nutrient cycling, and community dynamics that help maintain self-purification and ecological balance in river ecosystems. These findings underscore the critical need for more comprehensive environmental monitoring and management strategies to mitigate ecological risks posed by textile dyes in aquatic ecosystems, which remain unnoticed.

The Biosorption Capacity of the Marine Microalga Phaeodactylum tricornutum for the Removal of Toluidine Blue from Seawater

A wide variety of dyes, such as toluidine blue (TB), are used daily for a multitude of purposes. After use, many of these compounds end up in aqueous effluents, reaching natural environments, including marine environments. The removal of these pollutants from marine environments must be considered a priority problem. The search for natural techniques, such as biosorption, is a preferred option to eliminate pollution from natural environments. However, biosorption studies in seawater are scarce. For this reason, the living biomass of the marine microalga Phaeodactylum tricornutum was studied to determine its ability to remove TB from seawater. The kinetics of the biosorption process, the isotherms, and the effect of light and pH were determined. This biomass showed a maximum TB removal capacity of 45 ± 2 mg g-1 in the presence of light. Light had a positive effect on the TB removal capacity of this living biomass. The best fitting kinetics was the pseudo-second order kinetics. The efficiency of the removal process increased with increasing pH. This removal was more effective at alkaline pH values. The results demonstrated the efficacy of P. tricornutum living biomass for the efficient removal of toluidine blue dye from seawater both in the presence and absence of light.

Emerging pollutants in textile wastewater: an ecotoxicological assessment focusing on surfactants

Water and several chemicals, including dyestuffs, surfactants, acids, and salts, are required during textile dyeing processes. Surfactants are harmful to the aquatic environment and induce several negative biological effects in exposed biota. In this context, the present study aimed to assess acute effects of five surfactants, comprising anionic and nonionic classes, and other auxiliary products used in fiber dyeing processes to aquatic organisms Vibrio fischeri (bacteria) and Daphnia similis (cladocerans). The toxicities of binary surfactant mixtures containing the anionic surfactant dodecylbenzene sulfonate + nonionic fatty alcohol ethoxylate and dodecylbenzene sulfonate + nonionic alkylene oxide were also evaluated. Nonionic surfactants were more toxic than anionic compounds for both organisms. Acute nonionic toxicity ranged from 1.3 mg/L (fatty alcohol ethoxylate surfactant) to 2.6 mg/L (ethoxylate surfactant) for V. fischeri and from 1.9 mg/L (alkylene oxide surfactant) to 12.5 mg/L (alkyl aryl ethoxylated and aromatic sulfonate surfactant) for D. similis, while the anionic dodecylbenzene sulfonate EC50s were determined as 66.2 mg/L and 19.7 mg/L, respectively. Both mixtures were very toxic for the exposed organisms: the EC50 average in the anionic + fatty alcohol ethoxylate mixture was of 1.0 mg/L ± 0.11 for V. fischeri and 4.09 mg/L ± 0.69 for D. similis. While the anionic + alkylene oxide mixture, EC50 of 3.34 mg/L for D. similis and 3.60 mg/L for V. fischeri. These toxicity data suggested that the concentration addition was the best model to explain the action that is more likely to occur for mixture for the dodecylbenzene sulfonate and alkylene oxide mixtures in both organisms. Our findings also suggest that textile wastewater surfactants may interact and produce different responses in aquatic organisms, such as synergism and antagonism. Ecotoxicological assays provide relevant information concerning hazardous pollutants, which may then be adequately treated and suitably managed to reduce toxic loads, associated to suitable management plans.

Research progress in the degradation of printing and dyeing wastewater using chitosan based composite photocatalytic materials

The surge in economic growth has spurred the expansion of the textile industry, resulting in a continuous rise in the discharge of printing and dyeing wastewater. In contrast, the photocatalytic method harnesses light energy to degrade pollutants, boasting low energy consumption and high efficiency. Nevertheless, traditional photocatalysts suffer from limited light responsiveness, inadequate adsorption capabilities, susceptibility to agglomeration, and hydrophilicity, thereby curtailing their practical utility. Consequently, integrating appropriate carriers with traditional photocatalysts becomes imperative. The combination of chitosan and semiconductor materials stands out by reducing band gap energy, augmenting reactive sites, mitigating carrier recombination, bolstering structural stability, and notably advancing the photocatalytic degradation of printing and dyeing wastewater. This study embarks on an exploration by initially elucidating the technical principles, merits, and demerits of prevailing printing and dyeing wastewater treatment methodologies, with a focal emphasis on the photocatalytic approach. It delineates the constraints encountered by traditional photocatalysts in practical scenarios. Subsequently, it comprehensively encapsulates the research advancements and elucidates the reaction mechanisms underlying chitosan based composite materials employed in treating printing and dyeing wastewater. Finally, this work casts a forward-looking perspective on the future research trajectory of chitosan based photocatalysts, particularly in the realm of industrial applications.

Microbial communities drive flux of acid orange 7 and crystal violet dyes in water-sediment system

Unchecked dye effluent discharge poses escalating environmental and economic concerns, especially in developing nations. While dyes are well-recognized water pollutants, the mechanisms of their environmental spread are least understood. Therefore, the present study examines the partitioning of Acid Orange 7 (AO7) and Crystal Violet (CV) dyes using water-sediment microcosms and reports that native microbes significantly affect AO7 decolorization and transfer. Both dyes transition from infused to pristine matrices, reaching equilibrium in a fortnight. While microbes influence CV partitioning, their role in decolorization is minimal, emphasizing their varied impact on the environmental fate of dyes. Metagenomic analyses reveal contrasting microbial composition between control and AO7-infused samples. Control water samples displayed a dominance of Proteobacteria (62%), Firmicutes (24%), and Bacteroidetes (9%). However, AO7 exposure led to Proteobacteria reducing to 57% and Bacteroidetes to 3%, with Firmicutes increasing to 34%. Sediment samples, primarily comprising Firmicutes (47%) and Proteobacteria (39%), shifted post-AO7 exposure: Proteobacteria increased to 53%, and Firmicutes dropped to 38%. At the genus level, water samples dominated by Niveispirillum (34%) declined after AO7 exposure, while Bacillus and Pseudomonas increased. Notably, Serratia and Sphingomonas, known for azo dye degradation, rose post-exposure, hinting at their role in AO7 decolorization. Conversely, sediment samples showed a decrease in the growth of Bacillus and an increase in that of Pseudomonas and Serratia. These findings emphasize the significant role of microbial communities in determining the environmental fate of dyes, providing insights on its environmental implications and management.

Investigating sensitization activity of azobenzene disperse dyes via the Direct Peptide Reactivity Assay (DPRA)

Azobenzene disperse dyes are the fastest-growing category of commercial dyestuffs and have been found in indoor house dust and in children's polyester apparel. Azobenzene disperse dyes are implicated as potentially allergenic; however, little experimental data is available on allergenicity of these dyes. Here, we examine the binding of azobenzene disperse dyes to nucleophilic peptide residues as a proxy for their potential reactivity as electrophilic allergenic sensitizers. The Direct Peptide Reactivity Assay (DPRA) was utilized via both a spectrophotometric method and a high-performance liquid chromatography (HPLC) method. We tested dyes purified from commercial dyestuffs as well as several known transformation products. All dyes were found to react with nucleophilic peptides in a dose-dependent manner with pseudo-first order kinetics (rate constants as high as 0.04 h-1). Rates of binding reactivity were also found to correlate to electrophilic properties of dyes as measured by Hammett constants and electrophilicity indices. Reactivities of polyester shirt extracts were also tested for DPRA activity and the shirt extracts with high measured abundances of azobenzene disperse dyes were observed to induce greater peptide reactivity. Results suggest that azobenzene disperse dyes may function as immune sensitizers, and that clothing containing these dyes may pose risks for skin sensitization.

Preparation, analysis and toxicity characterisation of the redox metabolites of the azo food dye tartrazine

Tartrazine (E102, FD&C Yellow 5) is a vibrant yellow azo dye added to many processed foods. The safety of this ubiquitous chemical has not been fully elucidated, and it has been linked to allergic reactions and ADHD in some individuals. In our study, bacterial species isolated from human stool decolourised tartrazine and, upon exposure to air, a purple compound formed. Tartrazine is known to undergo reduction in the gut to sulfanilic acid and 4-amino-3-carboxy-5-hydroxy-1-(4-sulfophenyl)pyrazole (SCAP). These metabolites and their derivatives are relevant to the toxicology of tartrazine. The toxicity of sulfanilic acid has been studied before, but the oxidative instability of SCAP has previously prevented full characterisation. We have verified the chemical identity of SCAP and confirmed that the purple-coloured oxidation derivative is 4-(3-carboxy-5-hydroxy-1-(4-sulfophenyl)-1H-pyrazol-4-yl)imino-5-oxo-1-(4-sulfophenyl)-4,5-dihydro-1H-pyrazole-3-carboxylic acid (purpurazoic acid, PPA), as proposed by Westöö in 1965. A yellow derivative of SCAP is proposed to be the hydrolysed oxidation product, 4,5-dioxo-1-(4-sulfophenyl)-4,5-dihydro-1H-pyrazole-3-carboxylic acid. SCAP and PPA are moderately toxic to human cells (IC50 89 and 78 μM against HEK-293, respectively), but had no apparent effect on Escherichia coli and Bacillus subtilis bacteria. These results prompt further analyses of the toxicology of tartrazine and its derivatives.

Characterizing azobenzene disperse dyes and related compounds in house dust and their correlations with other organic contaminant classes

Azobenzene disperse dyes are the fastest-growing category of commercial dyestuffs and are implicated in the literature as potentially allergenic. In the indoor environment, these dyes may be shed from various textiles, including clothing and upholstery and accumulate in dust particles potentially leading to exposure in young children who have higher exposure to chemicals associated with dust due to their crawling and mouthing behaviors. Children may be more vulnerable to dye exposure due to their developing immune systems, and therefore, it is critical to characterize azobenzene disperse dyes in children's home environments. Here, we investigate azobenzene disperse dyes and related compounds in house dust samples (n = 124) that were previously analyzed for flame retardants, phthalates, pesticides and per- and polyfluoroalkyl substances (PFAS). High-resolution mass spectrometry was used to support both targeted and suspect screening of dyes in dust. Statistical analyses were conducted to determine if dye concentrations were related to demographic information. Detection frequencies for 12 target dyes ranged from 11% to 89%; of the dyes that were detected in at least 50% of the samples, geometric mean levels ranged from 32.4 to 360 ng/g. Suspect screening analysis identified eight additional high-abundance azobenzene compounds in dust. Some dyes were correlated to numerous flame retardants and several antimicrobials, and statistically higher levels of some dyes were observed in homes of non-Hispanic Black mothers than in homes of non-Hispanic white mothers. To our knowledge, this is the most comprehensive study of azobenzene disperse dyes in house dust to date. Future studies are needed to quantify additional dyes in dust and to examine exposure pathways of dyes in indoor environments where children are concerned.

Reductive metabolism of azo dyes and drugs: Toxicological implications

Azo compounds are widely distributed synthetic chemicals in the modern world. Their most important applications are as dyes, but, in addition, several azo compounds are used as pharmaceuticals. Ingested azo compounds can be reduced by the action of bacteria in the gut, where the oxygen tension is low, and the development of microbiome science has allowed more precise delineation of the roles of specific bacteria in these processes. Reduction of the azo bond of an azo compound generates two distinct classes of aromatic amine metabolites: the starting material that was used in the synthesis of the azo compound and a product which is formed de novo by metabolism. Reductive metabolism of azo compounds can have toxic consequences, because many aromatic amines are toxic/genotoxic. In this review, we discuss aspects of the development and application of azo compounds in industry and medicine. Current understanding of the toxicology of azo compounds and their metabolites is illustrated with four specific examples - Disperse Dyes used for dyeing textiles; the drugs phenazopyridine and eltrombopag; and the ubiquitous food dye, tartrazine - and knowledge gaps are identified. SUBMISSION TO: FCT VSI: Toxicology of Dyes.

Degradation of methylene blue using a novel gas-liquid hybrid DDBD reactor: Performance and pathways

A novel gas-liquid hybrid double dielectric barrier discharge (DDBD) reactor with coaxial cylinder configuration was developed for the degradation of methylene blue (MB) in this study. In this DDBD reactor, the reactive species generation occurred in the gas-phase discharge, directly in the liquid, and in the mixture of the working gas bubbles and the liquid, which could effectively increase the contact area between the active substance and MB molecules/intermediates, resulting in an excellent MB degradation efficiency and mineralization (COD and TOC). The electrostatic field simulation analysis by Comsol was carried out to determine the appropriate structural parameters of the DDBD reactor. The effect of discharge voltage, air flow rate, pH, and initial concentration on MB degradation was evaluated. Besides, major oxide species, ·OH, the dissolved O₃ and H₂O₂ generated in this DDBD reactor were determined. Moreover, major MB degradation intermediates were identified by LC-MS, based on which, possible degradation pathways of MB were proposed.

Genotoxicity of surface waters in Brazil

Brazil has abundant surface water resources, huge aquatic biodiversity and is home to 213 million people. Genotoxicity assays are sensitive tools to detect the effects of contaminants in surface waters and wastewaters, as well as to determine potential risks of contaminated waters to aquatic organisms and human health. This work aimed to survey the articles published in 2000-2021 that evaluated the genotoxicity of surface waters within Brazilian territory to unveil the profile and trends of this topic over time. In our searches, we considered articles focused on assessing aquatic biota, articles that conducted experiments with caged organisms or standardized tests in the aquatic sites, as well as articles that transported water or sediment samples from aquatic sites to the laboratory, where exposures were performed with organisms or standardized tests. We retrieved geographical information on the aquatic sites evaluated, the genotoxicity assays used, the percentage of genotoxicity detected, and, when possible, the causative agent of aquatic pollution. A total of 248 articles were identified. There was a trend of increase in the number of publications and annual diversity of hydrographic regions evaluated over time. Most articles focused on rivers from large metropolises. A very low number of articles were conducted on coastal and marine ecosystems. Water genotoxicity was detected in most articles, regardless of methodological approach, even in little-studied hydrographic regions. The micronucleus test and the alkaline comet assay were widely applied with blood samples, mainly derived from fish. Allium and Salmonella tests were the most frequently used standard protocols. Despite most articles did not confirm polluting sources and genotoxic agents, the detection of genotoxicity provides useful information for the management of water pollution. We discuss key points to be assessed to reach a more complete picture of the genotoxicity of surface waters in Brazil.

Using 3D printed magnetic platform as support for screen printed electrode applied for p-toluenediamine detection in biological fluid and water samples

The present work reports the development and application of a new electrochemical sensor for the determination of low concentration levels of p-toluenediamine (PTD) in biological fluids and surface water samples. The proposed sensor was developed using a 3D-printed magnetic device as platform for carbon screen printed electrode (CSPE) modified by magnetic nanoparticles functionalized with carboxylic groups and l-cysteine (MNP-CA-CYS). The results obtained from the morphological and electrochemical characterizations of the sensing platform enabled us to confirm the success of the sensor functionalization with l-cysteine and to have a better understanding of the electrochemical behavior and preconcentration of PTD on the electrode surface. PTD oxidation occurred at 0.24V on MNP-CA-CYS and the mechanism recorded an increase of 51.0% in anodic peak current. Under optimized conditions, the square wave voltammograms obtained for the electrode modified by 40.0 μL MNP-CA-CYS suspension at 1.0 mg mL^-1, with accumulation time of 3 min, presented an analytical curve with linear range of 8.00 × 10^-7 to 8.00 × 10^-5 mol L^-1, represented by the equation Iap = (0.383 ± 0.011)[PTD] - (8.112 ± 0.07) × 10^-8 (R² = 0.9994), and detection and quantification limits of 8.53 × 10^-8 and 2.56 × 10^-7 mol L^-1, respectively. Finally, the proposed method was validated through comparison with high performance liquid chromatography coupled to diode array detector (HPLC-DAD) technique and was successfully applied for PTD determination in samples of surface water, tap water, fetal bovine serum and artificial urine.

Catalytic degradation of azo dyes by bimetallic nanoparticles loaded in smart polymer microgels

The contamination of water by azo dyes is increasing rapidly due to their waste use in textile industries. These dyes are very toxic for living things. Therefore, it is very important to remove these dyes from water. Various materials are reported for this purpose. Here, the most effective system of bimetallic nanoparticles in smart polymer microgels was prepared. The microgel system of N-isopropylmethacrylamide (NMA) (monomer) and methacrylic acid (MAa) (comonomer) was synthesized by a free radical precipitation polymerization method and then bimetallic (Ag/Ni) nanoparticles were encapsulated into the P(NMA-MAa) microgels by in situ reduction of both silver and nickel salts by NaBH₄ (reductant) after insertion of both (Ag⁺/Ni²⁺) ions. The P(NMA-MAa) microgels and Ag/Ni-P(NMA-MAa) hybrid microgels were characterized with FTIR, UV-vis, TGA, XRD, DLS, EDX, and STEM. The pH and temperature responsive behavior of Ag/Ni-P(NMA-MAa) was also evaluated. The catalytic efficiency of Ag/Ni-P(NMA-MAa) was assessed for degradation of methyl orange (MOr), congo red (CRe), eriochrome black T (EBlT) and methyl red (MRe) dyes under various conditions in aqueous medium. The apparent rate constant (k ₀) value for MOr, CRe, EBlT and MRe was found to be 0.925 min^-1, 0.486 min^-1, 0.540 min^-1 and 0.525 min^-1 respectively. The Ag/Ni-P(NMA-MAa) was found to be an excellent recyclable catalyst.

Molecular Alterations and Severe Abnormalities in Spermatozoa of Young Men Living in the "Valley of Sacco River" (Latium, Italy): A Preliminary Study

The Valley of Sacco River (VSR) (Latium, Italy) is an area with large-scale industrial chemical production that has led over time to significant contamination of soil and groundwater with various industrial pollutants, such as organic pesticides, dioxins, organic solvents, heavy metals, and particularly, volatile organic compounds (VOCs). In the present study, we investigated the potential impact of VOCs on the spermatozoa of healthy young males living in the VSR, given the prevalent presence of several VOCs in the semen of these individuals. To accomplish this, spermiograms were conducted followed by molecular analyses to assess the content of sperm nuclear basic proteins (SNBPs) in addition to the protamine-histone ratio and DNA binding of these proteins. We found drastic alterations in the spermatozoa of these young males living in the VSR. Alterations were seen in sperm morphology, sperm motility, sperm count, and protamine/histone ratios, and included significant reductions in SNBP-DNA binding capacity. Our results provide preliminary indications of a possible correlation between the observed alterations and the presence of specific VOCs.

Tuning of Sm3+ and Er3+-doped TiO2 nanofibers for enhancement of the photocatalytic performance: Optimization of the photodegradation conditions

Titanium dioxide (TiO₂)-based nanofibers doped with samarium (Sm³⁺) and erbium (Er³⁺) at doping levels tuned in the range of 0.05-1.0% were prepared by the electrospinning-calcination method. The produced materials were well characterized by X-ray diffraction, SEM, EDX, and UV-vis diffuse reflectance spectroscopy. These one-dimensional nanostructures showed a crystalline structure with values of fiber diameters values between 60 and 100 nm. The best catalyst sample of this study was formulated as TiO₂:Sm (0.1%) and sintered at 600 °C. And, it was employed to intensify the photocatalytic process under visible-light irradiation. Likewise, the chemometric approach was applied to optimize the process. The results revealed that the rate constant for the photo-degradation of a cationic organic pollutant was significantly improved (k = 3.496 × 10^-1 min^-1). In terms of the reaction half-life, the intensification and optimization of the process led to a decrease in the half-life of the reaction from 68 to 2 min. And, these are outstanding findings for the photo-degradation process under visible-light irradiation. In addition, the total organic carbon (TOC) removal efficiencies were found to be 69.95% and 72.30% for the mineralization of MB and CIP, respectively, after a 360 min reaction time, which are significant results. Moreover, this material demonstrated remarkable photocatalytic activity for the degradation of ciprofloxacin (CIP) with a 99.6% removal efficiency and a rate constant of 4.292 × 10^-1 min^-1. Finally, the stability and reusability of this catalyst were demonstrated during five repetitive cycles of the CIP photodegradation.

A Synergistic Effect of Moringa oleifera-Based Coagulant and Ultrafiltration for the Wastewater Treatment Collected from Final ETP

Provision of safe drinking water, devoid of aetiologies, is an all-time challenge due to the usage of unsafe chemicals in most of the water treatment processes. The main objective of the present paper is to evaluate the use of Moringa oleifera (MO) as a natural coagulant in coagulation/flocculation (C/F) followed by the ultrafiltration (UF) of Final Effluent Treatment Plant wastewater treatment which can also be employed as an alternative to the present conventional methods of treatment. Process efficiency was evaluated in terms of chemical oxygen demand (COD), biochemical oxygen demand (BOD), turbidity, total hardness, alkalinity, ammoniacal nitrogen, and zeta potential along with permeability and fouling behaviour of the membrane. A significant improvement in both the physical and chemical characteristics of the effluent quality is showing a clearer colour and a greater reduction in BOD (89.74%) and COD (63.80%) values, while pH was in the acceptable range for effluent disposal. The results indicate a lower membrane fouling rate (49%), an increase in permeate flow, and better quality of the permeate, proving that the C/F-UF treatment is an effective and efficient technique for wastewater treatment. Eventually, the treated wastewater obtained with this process generates better quality water and preserves the aquatic ecosystem.

Role of bioelectrochemical systems for the remediation of emerging contaminants from wastewater: A review

Bioelectrochemical systems (BESs) are a unique group of wastewater remediating technology that possesses the added advantage of valuable recovery with concomitant wastewater treatment. Moreover, due to the application of robust microbial biocatalysts in BESs, effective removal of emerging contaminants (ECs) can be accomplished in these BESs. Thus, this review emphasizes the recent demonstrations pertaining to the removal of complex organic pollutants of emerging concern present in wastewater through BES. Owing to the recalcitrant nature of these pollutants, they are not effectively removed through conventional wastewater treatment systems and thereby are discharged into the environment without proper treatment. Application of BES in terms of ECs removal and degradation mechanism along with valuables that can be recovered are discussed. Moreover, the factors affecting the performance of BES, like biocatalyst, substrate, salinity, and applied potential are also summarized. In addition, the present review also elucidates the occurrence and toxic nature of ECs as well as future recommendations pertaining to the commercialization of this BES technology for the removal of ECs from wastewater. Therefore, the present review intends to aid the researchers in developing more efficient BESs for the removal of ECs from wastewater.

Measuring concentrations of a dye in the hemolymph of a marine amphipod: Development of a protocol for exposure assessment

The increasing pollution of aquatic environments due to old and emerging contaminants requires the development of integrative methods for exposure assessment. Internal concentrations are a reliable way to estimate total exposure of contaminants originated from different routes (water, sediment, and food). We developed a protocol to evaluate the concentration of a dye, C.I. Disperse Red 1, in the hemolymph of Parhyale hawaiensis, a marine amphipod. LOD and LOQ were satisfactory to detect the dye in all hemolymph samples. The concentration detected in the hemolymph varied related to exposure time and dye concentration (0.003 to 0.086 μg mL^-1). Polynomial regression model was the best fit. The protocol was reliable to detect and quantify dye exposure in marine amphipods and can be considered for future assessments of estuarine and marine regions under the influence of dye processing plants. The method possibly can be easily adapted to other amphipods and other azo dyes.

Photocatalytic degradation of Rhodamine-B by visible light assisted peroxymonosulfate activation using Z-scheme MIL-100(Fe)/Bi2S3 composite: a combined experimental and theoretical approach

The photocatalytic efficiency of binary MIL-100(Fe)/Bi2S3 (MIL-BS) composite was utilized towards visible light assisted peroxymonosulfate (PMS) activation and degradation of Rhodamine-B (RhB) dye. The binary catalyst, with 10wt% Bi2S3 (MIL-BS(10)),...

Improving the decolorization activity of Bacillus pumilus W3 CotA-laccase to Congo Red by rational modification

Congo Red (CR) is a typical azo dye with highly toxic and carcinogenic properties. This study aimed to improve the decolorization activity of Bacillus pumilus W3 CotA-laccase for azo dye CR. This work analyzed the interaction between CotA-laccase and CR based on homology modeling and molecular docking. The three amino acids (Gly323, Thr377, Thr418) in the substrate-binding pocket were rationally modified through saturation mutation. Finally, the obtained multi-site mutants T377I/T418G and G323S/T377I/T418G decolorized 76.59% and 59.37% of CR within 24 h at pH 8.0 without a mediator, which were 3.15- and 2.44-fold higher than the wild-type CotA. The catalytic efficiency of the multi-site mutants T377I/T418G and G323S/T377I/T418G to CR were increased by 2.21- and 2.01-fold compared with the wild-type CotA, respectively. The mechanism of activity enhancement of mutants was proposed by structural analysis. This evidence suggests that the mutants T377I/T418G and G323S/T377I/T418G could be used as novel bioremediation tools.

Recent advances in structural modifications of photo-catalysts for organic pollutants degradation - A comprehensive review

Over the last few years, industrial and anthropogenic activities have increased the presence of organic pollutants such as dyes, herbicides, pesticides, analgesics, and antibiotics in the water that adversely affect human health and the environment worldwide. Photocatalytic treatment is considered a promising, economical, effective, and sustainable process that utilizes light energy to degrade the pollutants in water. However, certain drawbacks like rapid recombination and low migration capability of photogenerated electrons and holes have restricted the use of photo-catalysts in industries. Hence, despite the abundance of lab-scale research, the technology is still not much commercialized in the mainstream. Several structural modifications in the photo-catalysts have been adopted to enhance the pollutant degradation performance to overcome the same. In this context, the present review article outlines the different advanced heterostructures synthesized to date for improved degradation of three major organic pollutants: antibiotics, dyes, and pesticides. Moreover, the article also emphasizes the degradation kinetics of photo-catalysts and the publication trend in the past decade along with the roadblocks preventing the transfer of technology from the laboratory to industry and new age photo-catalysts for the profitable implications in industrial sectors.

Occurrence of Textile Dyes and Metals in Tunisian Textile Dyeing Effluent: Effects on Oxidative Stress Status and Histological Changes in Balb/c Mice

Although it is known that textile wastewater contains highly toxic contaminants whose effects in humans represent public health problems in several countries, studies involving mammal species are scarce. This study was aimed to evaluate the toxicity profile of 90-days oral administration of textile dyeing effluent (TDE) on oxidative stress status and histological changes of male mice. The TDE was collected from the textile plant of Monastir, Tunisia and evaluated for the metals, aromatic amines, and textile dyes using analytical approaches. Metal analysis by ICP-MS showed that the tested TDE exhibited very high levels of Cr, As, and Sr, which exceeded the wastewater emission limits prescribed by WHO and Tunisian authority. The screening of TDE through UPLC-MS/MS confirmed the presence of two textile dyes: a triphenylmethane dye (Crystal violet) and a disperse azo dye (Disperse yellow 3). Exposure to TDE significantly altered the malondialdehyde (MDA), Conjugated dienes (CDs), Sulfhydryl proteins (SHP) and catalase levels in the hepatic and renal tissues. Furthermore, histopathology observation showed that hepatocellular and renal lesions were induced by TDE exposure. The present study concluded that TDE may involve induction of oxidative stress which ensues in pathological lesions in several vital organs suggesting its high toxicity. Metals and textile dyes may be associated with the observed toxicological effects of the TDE. These pollutants, which may have seeped into surrounding rivers in Monastir city, can cause severe health malaise in wildlife and humans.

Assessment of the compounds formed by oxidative reaction between p-toluenediamine and p-aminophenol in hair dyeing processes: Detection, mutagenic and toxicological properties

Previous studies have demonstrated the presence of precursors and coupling agents in wastewater from hair dyeing processes. The complex reaction involved in the oxidation of these compounds can generate extremely hazardous sub-products, leading to an increase in the mutagenicity and toxicity of wastewater. Without proper treatment, this highly toxic wastewater may find its way into the drinking water treatment plant. The present work aimed to investigate the main products generated after the oxidation reaction involving p-toluenediamine (PTD) and p-aminophenol (PAP) - precursors that widely used in the composition of commercial permanent hair dyes, under experimental conditions close to the routine hair dyeing process (in the presence and absence of hydrogen peroxide in ammoniacal medium), using spectroscopic techniques. The study also investigated the mutagenicity and toxicity of the products formed in the hairdressing wash water and conducted detection analysis to determine the presence of the precursors and Bandrowski's Base Derivative (BBD) in samples of wastewater, surface and drinking water using HPLC-DAD and linear voltammetry techniques. Based on this investigation, we identified several PTD and PAP self-oxidation products and eleven sub-products derived from the reaction between PTD and PAP. Assays conducted using Salmonella typhimurium YG1041, with and without activation-induced rat liver metabolism (S9), indicated mutagenicity of the reaction products in concentrations above 10.0 μg μL^-1. The concentrations of PTD, PAP, and several reactions and oxidation products of these precursors were detected in wastewater and water samples.

Multiple adverse effects of textile effluents and reactive Red 239 dye to aquatic organisms

Textile dyeing consumes high volumes of water, generating proportional number of colored effluents which contain several hazardous chemical. These contaminants can implicate in significant changes in aquatic environmental, including several adverse effects to organisms in different trophic levels. The present study was developed to assess the ecotoxicological effects of textile effluent samples and reactive Red 239 dye (used in cotton dyeing) to aquatic organisms Vibrio fischeri bacteria, Daphnia similis crustacean, and Biomphalaria glabrata snail (adults and embryos). Chronic assays with lethal and sublethal effects for Daphnia similis were included and performed only for textile effluents samples. The mutagenicity was also evaluated with Salmonella/microsome assay (TA98, TA100, and YG1041 strains). V. fischeri bacteria was the most sensitive to reactive Red 239 dye (EC50 = 10.14 mg L^-1) followed by mollusk embryos at all stages (EC50 = 116.41 to 124.14 mg L^-1), D. similis (EC50= 389.42 mg L^-1), and less sensitive to adult snails (LC50= 517.19 mg L^-1). The textile effluent was toxic for all exposed organisms [E(L)C50 < 15%] and B. glabrata embryos showed different responses in the early stages of blastulae and gastrulae (EC50 = 7.60 and 7.08%) compared to advanced development stages trochophore and veliger (EC50 = 21.56 and 29.32%). Developmental and sublethal effects in B. glabrata embryos and D. similis were evidenced. In the chronic assay with effluent, the EC10/NOEC = 3% was obtained. Mutagenic effects were not detected for dye aqueous solutions neither for effluents samples. These data confirmed the importance of evaluating the effects in aquatic organisms from different trophic levels and reinforce the need for environmental aquatic protection.

Characterizing azobenzene disperse dyes in commercial mixtures and children's polyester clothing

Azobenzene disperse dyes are the fastest-growing class of dyestuffs, yet little is known about dye occurrences, sources, and transformations; azo dyes are also underrepresented in chemical standard catalogs, molecular databases, and mass spectral libraries. Many azo dyes are known to have sensitization, mutagenic, and carcinogenic properties. To fill these knowledge gaps, azo dyes were purified from dyestuffs by Soxhlet extraction and flash chromatography and characterized using ultra-high-performance liquid chromatography (UHPLC) coupled to a high resolution Orbitrap Fusion Lumos mass spectrometer operated in positive electrospray ionization mode, as well as by ¹H and ¹³C NMR. Data were analyzed to identify likely chemical formulas and structures using a weight-of-evidence approach with multiple open-source, in silico computational mass spectrometry tools. Nineteen total azobenzene dyes were detected in dyestuffs via a non-targeted analysis approach; the azobenzene dyes Disperse Blue 79:1, Disperse Blue 183:1, Disperse Orange 44, Disperse Orange 73, Disperse Red 50, Disperse Red 73, and Disperse Red 354 were purified from raw dyestuffs. Samples of children's polyester clothing were then analyzed likewise. In clothing, 21 azobenzene disperse dyes were detected, 12 of which were confirmed and quantified via reference standards. Individual dyes in apparel were quantified at concentrations up to 9230 μg dye/g shirt, with geometric means ranging 7.91-300 μg dye/g shirt. Total dye load in apparel was quantified at up to 11,430 μg dye/g shirt. This research supported the development of reference standards and library mass spectra for azobenzene disperse dyes previously absent from standard and spectral libraries. By analyzing the scope and quantities of azo dyes in children's polyester apparel, this study will facilitate a more robust understanding of sources of these potentially allergenic and mutagenic compounds.

Removal of organic pollutants in water using water hyacinth (Eichhornia crassipes)

Globally, water hyacinth is recognized as an invasive species that threatens the survival of aquatic organisms. Its removal from water is performed manually or physically to avoid the secondary water pollution that results through the usage of chemically synthesised herbicides for its control, thus generating solid waste. Among other things, scientists have proposed the conversion of this waste into adsorbents that can be utilized for the remediation of water resources. This is essentially significant as the quality of water remains a necessity in all spheres of life. In this paper, the remediation strategies that have been proposed for the remediation of water resources through the removal of organic pollutants using water hyacinth are reviewed. Phytoremediation and removal of organics through adsorption using water hyacinth have been extensively investigated. From this review, it can be observed that the majority of the reviewed work focussed more on the removal of organic dyes from water. In this context, the mechanisms involved during the adsorption processes are discussed. In the end, future research that is likely to assist in the environmental management of water resources through their remediation with water hyacinth is suggested.

Mutagenicity of a novel 2-phenylbenzotriazole (non-chlorinated 2-phenylbenzotriazole-9) in mice

Dinitrophenylazo dyes can form 2-phenylbenzotriazoles (PBTAs) in the textile dyeing process upon the addition of chemical reducing agents. Some dinitrophenylazo dyes, as well as their respective reduced (non-chlorinated) and chlorinated PBTAs, are now found in rivers owing to wastewater from textile plants. This study aimed to investigate the genotoxicity of a new PBTA derived from C.I. Disperse Violet 93 azo dye, namely non-Cl PBTA-9. Primary DNA damage in the blood, liver, and colon cells, micronucleated cells in the bone marrow, and gene expression (NAT2, CYP1A1, TRP53, and CDKN1A) in liver cells were observed in mice, at acute oral exposure (gavage) doses of 5, 50, and 500 μg/kg body weight (b.w.). The non-chlorinated PBTA-9 caused DNA damage in the blood and liver (at 500 μg/kg b.w.) and in colon cells (at 5, 50, and 500 μg/kg), and increased the frequency of micronucleated cells in the bone marrow (at 5 and 50 μg/kg). No histological alterations or gene expression changes were observed. In conclusion, in vivo exposure to non-chlorinated PBTA-9 induced genetic damage in various rodent tissues, corroborating results previously obtained from the Ames test. Because this compound has been detected in rivers, exposure to humans and biota is a major concern.

Blood, urine and semen Volatile Organic Compound (VOC) pattern analysis for assessing health environmental impact in highly polluted areas in Italy

Volatile Organic Compound (VOC) analysis is usually applied in pollution assessment by checking for toxic or harmful volatile compounds in air, water and soil samples. In this study, exogenous VOCs and their derivatives, metabolized by cells, were valued into specific body fluids. In particular, the VOC profiles of blood, urine and human semen samples collected from young men living in two high pollution areas in Italy, i.e. Land of Fires and Valley of Sacco River, were fingerprinted. The analysis is based on Headspace Solid Phase MicroExtraction (HS-SPME) followed by Gas Chromatography-Mass Spectrometric detection (GC-MS). The volatile composition of the three body fluids showed that some VOCs are in common between blood, urine and human semen samples, whereas others are present only in a body fluid. Some compounds, as well as also some chemical classes show a higher affinity for a specific body fluid. Statistical analysis allowed to discriminate the two contaminated areas and identify those compounds which significantly contribute to the two areas classification. Some of these compounds are toxic and found prevalently in Valley of Sacco River samples, correspondingly to sperm analysis results for young men living in this zona worse than those living in Land of Fires.

Ferroin in dyes degradation by Fenton-like process: a chemical waste recycling perspective

Published literature describes the formation of the Fe (II)-phenanthroline complex (ferroin) as a stop way for Fenton processes, reducing radical yield. By contrast, this study presents evidence that ferroin can be activated by UVA in mildly acidic media in a photo-Fenton-like process. Because ferroin is the main waste from total iron determination in environmental samples, a recycling approach is suggested. Based on the best practices of waste management planning, an application of the proposed method for treating another chemical waste is presented. Titrimetric ammonia determination waste containing 2.67 mg L^-1 methyl red azo dye and 1.33 mg L^-1 methylene blue was degraded using the optimized experimental conditions: pH = 5.2-5.4; [H₂O₂] = 310 mg L^-1; [ferroin] = 1.4 mg L^-1; temperature = 36 ± 1 °C; reaction time = 165 min under UVA irradiation. Attenuation of most intense spectroscopic bands for the dyes achieved 94% (510 nm) and 96% (665 nm) reduction for methyl red and methylene blue, respectively, with degradation of ferroin itself. The present work brings empirical evidence that is possible to recycle ferroin as photo-Fenton-like process catalyst, as well as determine the best conditions for providing less acidic treated effluents with negligible suspended solid concentration, better than that obtained from classical photo-Fenton processes.

A comprehensive review on magnetic carbon nanotubes and carbon nanotube-based buckypaper for removal of heavy metals and dyes

Industrial effluents contain several organic and inorganic contaminants. Among others, dyes and heavy metals introduce a serious threat to drinking waterbodies. These pollutants can be noxious or carcinogenic in nature, and harmful to humans and different aquatic species. Therefore, it is of high importance to remove heavy metals and dyes to reduce their environmental toxicity. This has led to an extensive research for the development of novel materials and techniques for the removal of heavy metals and dyes. One route to the removal of these pollutants is the utilization of magnetic carbon nanotubes (CNT) as adsorbents. Magnetic carbon nanotubes hold remarkable properties such as surface-volume ratio, higher surface area, convenient separation methods, etc. The suitable characteristics of magnetic carbon nanotubes have led them to an extensive search for their utilization in water purification. Along with magnetic carbon nanotubes, the buckypaper (BP) membranes are also favorable due to their unique strength, high porosity, and adsorption capability. However, BP membranes are mostly used for salt removal from the aqueous phase and limited literature shows their applications for removal of heavy metals and dyes. This study focuses on the existence of heavy metal ions and dyes in the aquatic environment, and methods for their removal. Various fabrication approaches for the development of magnetic-CNTs and CNT-based BP membranes are also discussed. With the remarkable separation performance and ultra-high-water flux, magnetic-CNTs, and CNT-based BP membranes have a great potential to be the leading technologies for water treatment in future.

Persistent organic and inorganic pollutants in the effluents from the textile dyeing industries: Ecotoxicology appraisal via a battery of biotests

Today, the textile industry is considered as a leading economic sector in Tunisia. However, this sector demands a huge volume of water and a wide spectrum of chemicals, which is converted into potentially toxic wastewater leading to environmental perturbation and human health toxicity. Assessment of the environmental risks associated with textile wastewater becomes a necessity. In this study, textile dyeing wastewater samples were collected before and after the physico-chemical treatment carried out by textile companies located in Monastir-city-Tunisia and subjected to chemical analyzes in order to determine their physicochemical characteristics and the content of metals and textile dyes. The ecotoxicological assessment was performed using four organisms, namely Selenastrum capricornutum, Vibrio fischeri, Daphnia magna and Lepidium sativum, to represent different trophic levels. Based on chemical data, some physicochemical parameters (e.g. TSS, COD and TSS levels) and metals (e.g. Cr, Hg and Sb) in the textile dyeing effluents were revealed not in compliance with the Tunisian standard. Moreover, high quantities of three disperse dyes have been detected even in the textile dyeing wastewater samples before and after treatments. The ecotoxicological data confirmed that the textile dyeing influents displayed toxic effects to all the test organisms, with Selenastrum capricornutum being the most sensitive organism. While, the above toxic effects were decreased slightly when evaluating the treated effluents. Metals and textile disperse dyes could be associated with the observed toxic effects of the textile influents and effluents. In fact, the treatment process applied by the evaluated companies was only partially efficient at removing metals, disperse dyes and effluent ecotoxicity, suggesting potential risks to aquatic biota. These findings emphasize the importance of applying integrated chemical and biological approaches for continuous evaluation of the toxicity of the treated effluents to predict hazards on the environment.

New benzotriazoles generated during textile dyeing process: Synthesis, hazard, water occurrence and aquatic risk assessment

Phenylbenzotriazoles (PBTA) can be generated unintentionally during textile dyeing factories by reduction of dinitrophenylazo dyes and their subsequent chlorination in disinfection process. Eight non-chlorinated PBTAs (non-Cl PBTA) and their related chlorinated PBTAs have been found in rivers and presented mutagenic activity. No data on their aquatic toxicity are available. In this work, two new phenylbenzotriazoles, non-Cl PBTA-9 and PBTA-9, derived from the dye C.I. Disperse Violet 93 (DV93) were synthesized and chemically/toxicologically characterized. Both compounds were more mutagenic than the parental dye in the Salmonella/microsome assay in the presence of metabolic activation (S9). Mutagenicity studies in vivo with mammals would confirm their potential hazard to humans. The two compounds were acutely toxic to Daphnia similis. We developed an analytical method to simultaneously quantify non-Cl PBTA-9, PBTA-9 and DV93 in river waters. Non-Cl PBTA-9 was found in sites under influence of textile effluents but at concentrations that do not pose risk to the aquatic life according to the P-PNEC calculated based on the acute toxicity tests. PBTA-9 was not detected in any samples analyzed. More studies on the aquatic toxicity and water occurrence of PBTAs should be conducted to verify the relevance of this class of compounds as aquatic contaminants.

Ecotoxicity profile of heavily contaminated surface water of two rivers in Tunisia

Persistent organic and inorganic contaminants generated by industrial effluent wastes poses a threat to the maintenance of aquatic ecosystems and public health. The Khniss and Hamdoun rivers, located in the central-east of Tunisia, receive regularly domestic and textile wastewater load. The present study aimed to survey the water quality of these rivers using physicochemical, analytical and toxicological approaches. In the physicochemical analysis, the recorded levels of COD and TSS in both samples exceed the Tunisian standards. Using the analytical approach, several metals and some textile dyes were detected. Indeed, 17 metals were detected in both samples in varying concentrations, which do not exceed the Tunisian standards. The sources of metals pollution can be of natural and anthropogenic origin. Three textile disperse dyes were detected with high levels compared to other studies: the disperse orange 37 was detected in the Khniss river with a concentration of 6.438 μg/L and the disperse red 1 and the disperse yellow 3 were detected in the Hamdoun river with concentrations of 3.873 μg/L and 1895 μg/L, respectively. Textile activities were the major sources of disperse dyes. For both samples, acute and chronic ecotoxicity was observed in all the studied organisms, however, no genotoxic activity was detected. The presence of metals and textile disperse dyes could be associated with the ecotoxicological effects observed in the river waters, in particular due to the industrial activity, a fact that could deteriorate the ecosystem and therefore threaten the human health of the population living in the study areas. Combining chemical and biological approaches, allowed the detection of water ecotoxicity in testing organisms and the identification of possible contributors to the toxicity observed in these multi-stressed water reservoirs.

A promising Ames battery for mutagenicity characterization of new dyes

When testing new products, potential new products, or their impurities for genotoxicity in the Ames test, the quantity available for testing can be a limiting factor. This is the case for a dye repository of around 98,000 substances the Max Weaver Dye Library (MWDL). Mutagenicity data on dyes in the literature, although vast, in several cases is not reliable, compromising the performance of the in silico models. In this report, we propose a strategy for the generation of high-quality mutagenicity data for dyes using a minimum amount of sample. We evaluated 15 dyes from different chemical classes selected from 150 representative dyes of the MWDL. The purity and molecular confirmation of each dye were determined, and the microplate agar protocol (MPA) was used. Dyes were tested at the limit of solubility in single and concentration-response experiments using seven strains without and with metabolic activation except for anthraquinone dyes which were tested with eight strains. Six dyes were mutagenic. The most sensitive was YG1041, followed by TA97a > TA98 > TA100 = TA1538 > TA102. YG7108 as well as TA1537 did not detect any mutagenic response. We concluded that the MPA was successful in identifying the mutagenicity of dyes using less than 12.5 mg of sample. We propose that dyes should be tested in a tiered approach using YG1041 followed by TA97a, TA98, and TA100 in concentration-response experiments. This work provides additional information on the dye mutagenicity database available in the literature.

Auramine dyes induce toxic effects to aquatic organisms from different trophic levels: an application of predicted non-effect concentration (PNEC)

The dyes Auramine and Auramine O are used in several industrial products, despite the scarce information regarding their ecotoxicity. The aim of the present study was to assess the acute and chronic toxicity of both dyes to aquatic organisms from different trophic levels (Raphidocelis subcapitata, Daphnia similis, Hydra attenuata, and Danio rerio) and calculate their predicted non-effect concentrations (PNEC). Auramine and Auramine O induced toxicity to all selected test organisms with L(E)C50 values ranging from 300 to 4800 ug/L. Both dyes induced inhibition in the growth rate of exposed algae, negatively affecting the reproduction of D. similis and induced deformities in H. attenuata (clubbed tentacles and shortened tentacles) and D. rerio (edemas, tail malformation and delay in yolk sac absorption). PNEC values of 0.92 μg/L and 4.0 μg/L were obtained for Auramine and Auramine O, respectively, based on results of the most sensitive test system (algae). Test results were analyzed using the Criteria of Reporting and Evaluating Ecotoxicity Data (CRED), confirming their reliability and relevance. Thus, PNEC values can be used in future risk assessments of those substances in freshwater systems.

Unravelling the Environmental Application of Biochar as Low-Cost Biosorbent: A Review

In this age, a key target for enhancing the competitiveness of the chemical, environmental and biotechnology industries is to manufacture high-value products more efficiently and especially with significantly reduced environmental impact. Under this premise, the conversion of biomass waste to a high-value added product, biochar, is an interesting approach under the circular economy principles. Thus, the improvements in the biochar production and its new and innovative uses are hot points of interest, which are the focus of vast efforts of the scientific community. Biochar has been recognized as a material of great potential, and its use as an adsorbent is becoming a reliable strategy for the removal of pollutants of different streams, according to its high adsorption capacity and potential to eliminate recalcitrant compounds. In this review, a succinct overview of current actions developed to improve the adsorption capability of biochar, mainly of heavy metal and organic pollutants (dyes, pharmaceuticals and personal care products), is summarized and discussed, and the principal adsorption mechanisms are described. The feedstock and the production procedure are revealed as key factors that provide the appropriate physicochemical characteristics for the good performance of biochar as an adsorbent. In addition, the modification of the biochar by the different described approaches proved their feasibility and became a good strategy for the design of selective adsorbents. In the last part of this review, the novel prospects in the regeneration of the biochar are presented in order to achieve a clean technology for alleviating the water pollution challenge.

Characterization of synthetic dyes for environmental and forensic assessments: A chromatography and mass spectrometry approach

Dyes have become common substances since they are employed in mostly all objects surrounding our daily activities such as clothing and upholstery. Based on the usage and disposal of these objects, the transfer of the dyes to other media such as soil and water increases their prevalence in our environment. However, this prevalence could help to solve crimes and pollution problems if detection techniques are proper. For that reason, the detection and characterization of dyes in complex matrices is important to determine the possible events leading to their deposition (natural degradation, attempts of removal, possible match with evidence, among others). Currently, there are several chromatographic and mass spectrometric approaches used for the identification of these organic molecules and their derivatives with high specificity and accuracy. This review presents current chromatographic and mass spectrometric methods that are used for the detection and characterization of disperse, acid, basic, and reactive dyes, and their derivatives.

Adverse effects of textile dyes on antioxidant enzymes and cholinesterase activities in Drosophila melanogaster (Oregon R+)

The effluents from textile dyeing industry are causing water pollution and may transform into more toxic and carcinogenic chemical species by environmental conditions. Therefore systemic toxicity of textile dyes is major health concern. Hence, this study sought to examine the toxic effect of disperse textile dyes on important systemic enzymes in the larvae of wild type Drosophila melanogaster (Oregon R⁺). Drosophila larvae were fed with corn-sugar-yeast diets containing two disperse dyes, Disperse blue-124 and Disperse black-9 (1, 10 and 100 mg/mL) for 2 days (48 h) and subsequent the enzymatic estimations were carried out using larval homogenate. In silico molecular docking studies were also performed to analyze the binding interaction of these dyes with acetyl choline esterase enzyme. Disperse black 9 shows more strong binding by occupying a groove and forming one hydrogen bond with Tyr465 of acetyl choline esterase enzyme while Disperse blue-124 shows surface binding without forming any hydrogen bond. Drosophila larvae fed on these dyes exhibited a dose-dependent increase in acetyl choline esterase enzymatic activity (1.8 fold increase with Disperse black-9, 100 mg/mL) while 4.4-folds Disperse blue-124, 100 mg/mL). Both Disperse Blue and Disperse Black dyes altered the activities of antioxidant enzymes Catalase (CAT, increased more than 2.5 fold), Superoxide dismutase (SOD, increased more than two folds) and showed a dose-dependent increase in Xanthine oxidase and lipid peroxidation (LPO) levels (more than 3 folds). Therefore both the disperse dyes were found to dysregulate the activities of antioxidant enzymes which may be the underlying mechanism for their toxic effects.

Synthetic organic dyes as contaminants of the aquatic environment and their implications for ecosystems: A review

In recent years interest in the fate of chemical compounds in the aquatic environment has increased. There are many reports of the presence of chemical compounds such as pesticides, steroid hormones or antibiotics in the aquatic environment. At present, little is known about synthetic organic dyes as contaminants of water bodies. These dyes are omnipresent in many application areas from the textile, tannery, cosmetic and food industries to human and veterinary medicine. Their large-scale production and widespread applications have caused synthetic organic dyes to permeate into different compartments of water and soil environment. So far, dyes have been determined in environmental samples such as water, suspended particulate matters, sediment and wild fish. For this reason, they are considered micropollutants of aquatic ecosystems. Due to the toxicological properties and pharmacological activity of some synthetic organic dyes their occurrence in water bodies should be monitored. The hazard potential of synthetic organic dyes should be assessed, especially their influence on aquatic biota, not least because dyes in water ecosystems may pose a threat to animal or human health as higher-order consumers. This review collects scientific data considering application areas, toxicity, sources, environmental occurrence and the fate of synthetic organic dyes and the ecological implications of synthetic organic dyes presence in the total environment. Moreover, analytical methods for dye determination and methods for dye removal from wastewater are described.