Nanobubble Technologies Offer Opportunities To Improve Water Treatment

Nanobubbles improve peroxymonosulfate-based advanced oxidation: High efficiency, low toxicity/cost, and novel collaborative mechanism

Cl- activated peroxymonosulfate (PMS) oxidation technology can effectively degrade pollutants, but the generation of chlorinated disinfection byproducts (DBPs) limits the application of this technology in water treatment. In this study, a method of nanobubbles (NBs) synergistic Cl-/PMS system was designed to try to improve this technology. The results showed the synergistic effects of NBs/Cl-/PMS were significant and universal while its upgrade rate was from 12.89% to 34.97%. Moreover, the synergistic effects can be further improved by increasing the concentration and Zeta potential of NBs. The main synergistic effects of NBs/Cl-/PMS system were due to the electrostatic attraction of negatively charged NBs to Na+ from NaCl, K+ from PMS, and H+ from phenol, which acted as a "bridge" between Cl- and HSO5- as well as phenol and Cl-/HSO5-, increasing active substance concentration. In addition, the addition of NBs completely changed the oxidation system of Cl-/PMS from one that increases environmental toxicity to one that reduces it. The reason was that the electrostatic attraction of NBs changed the active sites and degradation pathway of phenol, greatly reducing the production of highly toxic DBPs. This study developed a novel environmentally friendly oxidation technology, which provides an effective strategy to reduce the generation of DBPs in the Cl-/PMS system.

Nanobubble applications in aquaculture industry for improving harvest yield, wastewater treatment, and disease control

The ever-growing demand for aquaculture has led the industry to seek novel approaches for more sustainable practices. These attempts aim to increase aquaculture yield by increasing energy efficiency and decreasing footprint and chemical demand without compromising animal health. For this, emerging nanobubbles (NBs) aeration technology gained attention. NBs are gas-filled pockets suspended as sphere-like cavities (bulk NBs) or attached to surfaces (surface NBs) with diameters of <1 μm. Compared to macro and microbubbles, NBs have demonstrated unique characteristics such as long residence times in water, higher gas mass transfer efficiency, and hydroxyl radical production. This paper focuses on reviewing NB technology in aquaculture systems by summarizing and discussing uses and implications. Three focus areas were targeted to review the applicability and effects of NBs in aquaculture: (i) NBs aeration to improve the aquaculture harvest yield and subsequent wastewater treatment; (ii) NB application for inactivation of harmful microorganisms; and (iii) NBs for reducing oxidative stress and improving animal health. Thus, this study reviews the research studies published in the last 10 years in which air, oxygen, ozone, and hydrogen NBs were tested to improve gas mass transfer, wastewater treatment, and control of pathogenic microorganisms. The experimental results indicated that air and oxygen NBs yield significantly higher productivity, growth rate, total harvest, survival rate, and less oxygen consumption in fish and shrimp farming. Secondly, the application of air and ozone NBs demonstrated the ability of efficient pollutant degradation. Third, NB application demonstrated effective control of infectious bacteria and viruses, and thus increased fish survival, as well as different gene expression patterns that induce immune responses to infections. Reviewed studies lack robust comparative analyses of the efficacy of macro- and microbubble treatments. Also, potential health and safety implications, as well as economic feasibility through factors such as changes in capital infrastructure, routine maintenance and energy consumption need to be considered and evaluated in parallel to applicability. Therefore, even with a promising future, further studies are needed to confirm the benefits of NB treatment versus conventional aquaculture practices.

Nanobubble technology to enhance energy recovery from anaerobic digestion of organic solid wastes: Potential mechanisms and recent advancements

Nanobubble (NB) technology has gained popularity in the environmental field owing to its distinctive characteristics and ecological safety. More recently, the application of NB technology in anaerobic digestion (AD) systems has been proven to promote substrate degradation and boost the production of biogas (H2 and/or CH4). This review presents the recent advancements in the application of NB technology in AD systems. Meanwhile, it also sheds light on the underlying mechanisms of NB technology that contribute to the enhanced biogas production from AD of organic solid wastes. Specifically, the working principles of the NB generator are first summarized, and then the structure of the NB generator is optimized to accommodate the demand for NB characteristics in the AD system. Subsequently, it delves into a detailed discussion of how the addition of nanobubble water (NBW) affects AD performance and the different factors that NB can potentially contribute. As a simple and environmentally friendly additive, NBW was commonly used in the AD process to enhance the fluidity and mass transfer characteristics of digestate. Additionally, NB has the potential to enhance the functionality of different types of microbial enzymes that play crucial roles in the AD process. This includes boosting extracellular hydrolase activities, optimizing coenzyme F420, and improving cellulase function. Finally, it is proposed that NBW has development potential for the pretreatment of substrate and inoculum, with future development being directed towards this aim.

Nanobubble water promotes anaerobic digestion of high-solids cattle manure under mesophilic and thermophilic conditions

The gradual increase in cattle farming has led to a huge production of cattle manure (CM), but the conventional treatment methods are less efficient. In this study, the treatment method of anaerobic digestion (AD) of high-solids CM by combining nanobubble water (NBW) with different gases was proposed to present a new idea for the reduction, harmlessness, and resourcefulness of CM. It was found that the performance of the digester with added NBW was better than the control. Among them, the cumulative methane yield T-Air: 227.09 mL g-1 VSadded and T-CO2: 226.12 mL g-1 VSadded increased by 17.72 % and 17.22 %, respectively, compared with the control T: 192.90 mL g-1 VSadded under thermophilic conditions. Under mesophilic conditions, M-Air: 162.39 mL g-1 VSadded increased by 9.68 % compared with control M: 148.05 mL g-1 VSadded. Microbial communities analyzed at the genus level revealed that the relative abundance of bacteria favorable to hydrolysis and acid-producing processes, such as Defluviitalea, Haloplasma, and Bacillus, increased to varying degrees. Moreover, the relative abundance of archaea favorable for methanogenesis, such as Methanoculleus, Methanobrevibacter, and Methanosarcina, also increased to varying degrees. Therefore, the addition of NBW promoted the hydrolysis of high-solids CM, enhanced the stability of the reaction, improved the methanogenic performance, and increased the RA of favorable genera, which ultimately led to a better performance of the AD of high-solids CM.

Electric field-based air nanobubbles (EF-ANBs) irrigation on efficient crop cultivation with reduced fertilizer dependency

The advent of air nanobubbles (ANBs) has opened up a wide range of commercial applications spanning industries including wastewater treatment, food processing, biomedical engineering, and agriculture. The implementation of electric field-based air nanobubbles (EF-ANBs) irrigation presents a promising approach to enhance agricultural crop efficiency, concurrently promoting environmentally sustainable practices through reducing fertilizer usage. This study investigated the impact of EF-ANBs on the germination and overall growth of agricultural crops in soil. Results indicate a substantial enhancement in both germination rates and plant growth upon the application of EF-ANBs. Notably, the introduction of ANBs led to a significant enhancement in the germination rate of lettuce and basil, increasing from approximately 20% to 96% and from 16% to 53%, respectively over two days. Moreover, the presence of EF-ANBs facilitates superior hypocotyl elongation, exhibiting a 2.8- and a 1.6-fold increase in the elongation of lettuce and basil, respectively, over a six-day observation period. The enriched oxygen levels within the air nanobubbles expedite aerobic respiration, amplifying electron leakage from the electron transport chain (ETC) and resulting in heightened reactive oxygen species (ROS) production, playing a pivotal role in stimulating growth signaling. Furthermore, the application of EF-ANBs in irrigation surpasses the impact of traditional fertilizers, demonstrating a robust catalytic effect on the shoot, stem, and root length, as well as the leaf count of lettuce plants. Considering these parameters, a single fertilizer treatment (at various concentrations) during EF-ANBs administration, demonstrates superior plant growth compared to regular water combined with fertilizer. The findings underscore the synergistic interaction between aerobic respiration and the generation of ROS in promoting plant growth, particularly in the context of reduced fertilizer levels facilitated by the presence of EF-ANBs. This promising correlation holds significant potential in establishing more sustainability for ever-increasing environmentally conscious agriculture.

Nanobubble transport in porous media: Towards agro- and environmental applications

Nanobubbles have been increasingly used in various applications involving porous media, such as groundwater remediation and irrigation. However, the fundamental scientific knowledge regarding the interactions between nanobubbles and the media is still limited. The interactions can be repulsive, attractive, or inert, and can involve reversible or irreversible attachment as well as destructive mechanisms. Specifically, the stability and mobility of nanobubbles in porous media is expected to be dependent on the dynamic conditions and the physicochemical properties of the porous media, solutions, and nanobubbles themselves. In this study, we investigated how changes in solution chemistry (pH, ionic strength, and valence) and media characteristics (size and wettability) affect the size and concentration of nanobubbles under dynamic conditions using column experiments. Quartz crystal microbalance with dissipation monitoring provided a deeper understanding of irreversible and elastic nanobubbles' interactions with silica-coated surfaces. Our findings suggest that nanobubbles are less mobile in solutions of higher ionic strength and valence, acidic pH and smaller porous media sizes, while the wettability of porous media has a negligible influence on the retention of nanobubbles. Overall, our findings provide insights into the underlying mechanisms of nanobubble interactions and suggest potential strategies to optimize their delivery in various applications.

Cobalt-based hybrid nanoparticles loaded with curcumin for ligand-enhanced synergistic nanocatalytic therapy/chemotherapy combined with calcium overload

The therapeutic efficacy of Fenton or Fenton-like nanocatalysts is usually restricted by the inappropriate pH value and limited concentration of hydrogen peroxide (H2O2) at the tumor site. Herein, calcium carbonate (CaCO3)-mineralized cobalt silicate hydroxide hollow nanocatalysts (CSO@CaCO3, CC) were synthesized and loaded with curcumin (CCC). This hybrid system can simultaneously realize nanocatalytic therapy, chemotherapy and calcium overload. With the stabilization of liposomes, CCC is able to reach the tumor site smoothly. The CaCO3 shell first degrades in an acidic tumor environment, releasing Cur and Ca2+, and the pH value of the tumor is increased simultaneously. Then the exposed CSO catalyzes the Fenton-like reaction to convert H2O2 into ˙OH and enhances the cytotoxicity of curcumin (Cur) by catalytically oxidizing it to a ˙Cur radical. Curcumin not only induces the chemotherapy effect but also serves as a nucleophilic ligand and an electron donor in the catalytic system, enhancing the Fenton-like activity of CCC by electron transfer. In addition, calcium overload also amplifies the efficacy of ROS-based therapy. In vitro and in vivo results show that CCC exhibited an excellent synergistic tumor inhibition effect without any clear side effect. This work proposes a novel concept of nanocatalytic therapy/chemotherapy synergistic mechanism by the ligand-induced enhancement of Fenton-like catalytic activity, and inspires the construction of combined therapeutic nanoplatforms and multifunctional nanocarriers for drug and ion delivery in the future.

Cable bacteria: Living electrical conduits for biogeochemical cycling and water environment restoration

Since the discovery of multicellular cable bacteria in marine sediments in 2012, they have attracted widespread attention and interest due to their unprecedented ability to generate and transport electrical currents over centimeter-scale long-range distances. The cosmopolitan distribution of cable bacteria in both marine and freshwater systems, along with their substantial impact on local biogeochemistry, has uncovered their important role in element cycling and ecosystem functioning of aquatic environments. Considerable research efforts have been devoted to the potential utilization of cable bacteria for various water management purposes during the past few years. However, there lacks a critical summary on the advances and contributions of cable bacteria to biogeochemical cycles and water environment restoration. This review aims to provide an up-to-date and comprehensive overview of the current research on cable bacteria, with a particular view on their participation in aquatic biogeochemical cycles and promising applications in water environment restoration. It systematically analyzes (i) the global distribution of cable bacteria in aquatic ecosystems and the major environmental factors affecting their survival, diversity, and composition, (ii) the interactive associations between cable bacteria and other microorganisms as well as aquatic plants and infauna, (iii) the underlying role of cable bacteria in sedimentary biogeochemical cycling of essential elements including but not limited to sulfur, iron, phosphorus, and nitrogen, (iv) the practical explorations of cable bacteria for water pollution control, greenhouse gas emission reduction, aquatic ecological environment restoration, as well as possible combinations with other water remediation technologies. It is believed to give a step-by-step introduction to progress on cable bacteria, highlight key findings, opportunities and challenges of using cable bacteria for water environment restoration, and propose directions for further exploration.

Microwave pretreatment of wastewater sludge technology-a scientometric-based review

This manuscript presents a scientometric review of recent advances in microwave pretreatment processes for sewage sludge, systematically identifying existing gaps and prospects. For this purpose, 1763 papers on the application of microwave technology to sludge pretreatment were retrieved from the Web of Science (WoS) using relevant keywords. These publications were then analyzed using diverse scientometric indices. The results show that research in this field encompasses applications based on the non-thermal effects of microwaves, enhanced effectiveness of anaerobic digestion (AD), and the energy balance of this pretreatment system. Overcoming existing technical challenges, such as the cleavage of extracellular polymers, reducing microwave energy consumption, understanding the non-thermal effects of microwaves, promoting AD of sludge in combination with other chemical and physical methods, and expanding the application of the technology, are the main scientific focuses. Additionally, this paper thoroughly examines both the constraints and potential of microwave pretreatment technology for wastewater treatment.

Hydrogen Nanobubbles Generated In Situ from Nanoscale Zerovalent Iron with Water to Further Enhance Selenite Sequestration

Gas nanobubbles used for water treatment and recovery give rise to great concern for their unique advantages of less byproducts, higher efficiency, and environmental friendliness. Nanoscale zerovalent iron (nZVI), which has also been widely explored in the field of environmental remediation, can generate gas hydrogen by direct reaction with water. Whether nanoscale hydrogen bubbles can be produced to enhance the pollution removal of the nZVI system is one significant concern involved. Herein, we report direct observations of in situ generation of hydrogen nanobubbles (HNBs) from nZVI in water. More importantly, the formed HNBs can enhance indeed the reduction of Se(IV) beyond the chemical reduction ascribed to Fe(0), especially in the anaerobic environment. The possible mechanism is that HNBs enhance the reducibility of the system and promote electron transport in the solution. This study demonstrates a unique function of HNBs combined with nZVI for the pollutant removal and a new approach for in situ HNB generation for potential applications in the fields of in situ remediation agriculture, biotechnology, medical treatment, health, etc.

Effect of nanobubble concentrations on fouling control capacity in biogas slurry wastewater distribution systems

Nanobubble (NB) represents a promising practice for mitigating fouling in biogas slurry distribution systems. However, its anti-fouling effectiveness and optimal use dosage are unknown. This study investigated the NB anti-fouling capacity at six concentrations (0 %-100 %, denoting the ratio of maximum NB-infused water; particle concentrations in 0 % and 100 % ratios were 1.08 × 107 and 1.19 × 109 particles mL-1, respectively). Results showed that NB effectively mitigated multiple fouling at 50 %-100 % ratios, whereas low NB concentration exacerbated fouling. NB functioned both as an activator and a bactericide for microorganisms, significantly promoting biofouling at 5 %-25 %, and inhibiting biofouling at 50 %-100 %. Owing to an enhanced biofilm biomineralization ability, low NB concentration aggravated precipitate fouling, whereas high NB doses effectively mitigated precipitates. Additionally, higher NB concentrations demonstrated superior control efficiency against particulate fouling. This study contributes insights into NB effectiveness in controlling various fouling types within wastewater distribution systems.

Recent advances in activated water systems for the postharvest management of quality and safety of fresh fruits and vegetables

Over the last three decades, decontamination management of fresh fruits and vegetables (FFVs) in the packhouses and along the supply chains has been heavily dependent on chemical-based wash. This has resulted in the emergence of resistant foodborne pathogens and often the deposition of disinfectant byproducts on FFVs, rendering them unacceptable to consumers. The management of foodborne pathogens, microbial contaminants, and quality of FFVs are a major concern for the horticultural industries and public health. Activated water systems (AWS), such as electrolyzed water, plasma-activated water, and micro-nano bubbles, have gained significant attention from researchers over the last decade due to their nonthermal and nontoxic mode of action for microbial inactivation and preservation of FFVs quality. The aim of this review is to provide a comprehensive summary of recent progress on the application of AWS and their effects on quality attributes and microbial safety of FFVs. An overview of the different types of AWS and their properties is provided. Furthermore, the review highlights the chemistry behind generation of reactive species and the impact of AWS on the quality attributes of FFVs and on the inactivation/reduction of spoilage and pathogenic microbes (in vivo or in vitro). The mechanisms of action of microorganism inactivation are discussed. Finally, this work highlights challenges and limitations for commercialization and safety and regulation issues of AWS. The synergistic prospect on combining AWS for maximum microorganism inactivation effectiveness is also considered. AWS offers a potential alternative as nonchemical interventions to maintain quality attributes, inactivate spoilage and pathogenic microorganisms, and extend the shelf-life for FFVs.

Effects of microbubble pretreatment on physiochemical and microbial properties of excess activated sludge

Fast increased amount of excess activated sludge (EAS) from wastewater treatment plants has aroused universal concerns on its environmental risks and demands for appropriate treatments, while effective treatment is dependent upon proper pretreatment. In this study, air-supplied microbubbles (air-MBs) with generated size of 25.18 to 28.25 μm were used for EAS pretreatment. Different durations (30, 60, 90, and 120 s) yielded sludge with varied physiochemical conditions, and 60 s decreased sludge oxidation status and significantly increased adenosine triphosphate (ATP) content. Soluble, loosely-bound, and tightly-bound extracellular polymeric substances (SEPS, LB-EPS, and TB-EPS) were extracted from the sludge through a stepwise approach and examined through three-dimensional excitation-emission matrix (3D-EEM) and quantitative analysis. The results showed that 60- and 120-s treatments generated stronger fluorescence intensities on dissolved organic matters (DOMs) of protein-like and fulvic acid in LB-EPS and TB-EPS, which indicated the decrease of counterparts in EAS, and therefore facilitated sludge dewaterability and reduction. The dominant microbial communities in EAS, including Proteobacteria, Bacteroidota, Chloroflexi, and Actinobacteriota, were not significantly affected by MB pretreatment. The results collectively revealed the effects of MB pretreatment on EAS and indicated that MBs could be an effective pretreatment technique for EAS treatment process.

Unlocking the Potential of Nanobubbles: Achieving Exceptional Gas Efficiency in Electrogeneration of Hydrogen Peroxide

The electrogeneration of hydrogen peroxide (H2 O2 ) via the oxygen reduction reaction is a crucial process for advanced water treatment technologies. While significant effort is being devoted to developing highly reactive materials, gas provision systems used in these processes are receiving less attention. Here, using oxygen nanobubbles to improve the gas efficiency of the electrogeneration of H2 O2 is proposed. Aeration with nanobubbles is compared to aeration with macrobubbles under an identical experimental set-up, with nanobubbles showing a much higher gas-liquid volumetric mass transfer coefficient (KL a) of 2.6 × 10-2 min-1 compared to 2.7 × 10-4 min-1 for macrobubbles. Consequently, nanobubbles exhibit a much higher gas efficiency using 60% of O2 delivered to the system compared to 0.19% for macrobubbles. Further, it is observed that the electrogeneration of H2 O2 using carbon felt electrodes is enhanced using nanobubbles. Under the same dissolved oxygen levels, nanobubbles boost the reaction yield to 84%, while macrobubbles yield only 53.8%. To the authors' knowledge, this is the first study to investigate the use of nanobubbles in electrochemical reactions and demonstrate their ability to enhance gas efficiency and electrocatalytic response. These findings have important implications for developing more efficient chemical and electrochemical processes operating under gas-starving systems.

Characteristics and Stability of Ozone Nanobubbles in Freshwater Conditions

The characteristics and stability of ozone nanobubbles (NBs) were investigated for the first time under different preparation conditions and freshwater conditions (i.e., pH, natural organic matter [NOM], carbonate, calcium, and temperature) for an extended period. Two oxygen gas flow rates (4 and 1 L/min) used in ozone NB generation affected the characteristics and stability of ozone NBs. The ozone NBs generated at a high initial dissolved ozone (12.5 mg/L) concentration showed a much higher brightness during measurements than the ozone NBs generated at a low initial dissolved ozone concentration (1 mg/L). The former also exhibited a higher negative surface charge and higher stability in comparison to the latter. The stability and half-lives of ozone NBs followed the order of 3 mM Ca2+ < pH 3 < NOM with high specific ultraviolet absorbance at 254 nm (SUVA254 = 4.1 L/mg·m) < pH 7 < pH 9, while the effects of carbonate and temperature were insignificant. Ozone NBs were relatively stable in waters for a long period (e.g., ≥ 60 days) except for high hardness or low pH conditions. Higher levels of hydroxyl radicals were produced from ozone NB solutions as compared to conventional ozonation.

Two-dimensional water-molecule-cluster layers at nanobubble interfaces

HYPOTHESIS

Bulk nanobubbles (NBs) have high surface charge densities and long lifetimes. Despite several attempts to understand the lifetime of NBs, their interfacial layer structure remains unknown. It is hypothesized that a specific interfacial layer exists with a hydrogen bond network that stabilizes NBs.

EXPERIMENTS

In situ infrared reflectance-absorption spectroscopy and density functional theory were used to determine the interfacial layer structure of NBs. Furthermore, nuclear magnetic resonance spectroscopy was used to examine the interfacial layer hardness of bubbles filled with N2, O2, and CO2, which was expected to depend on the encapsulated gas species.

FINDINGS

The interfacial layer was composed of three-, four-, and five-membered ring clusters of water molecules. An interface model was proposed in which a two-dimensional layer of clusters with large electric dipole moments is oriented toward the endohedral gas, and the hydrophobic surface is adjacent to the free water. The interfacial layer hardness was dependent on the interaction with the gas (N2 > O2 > CO2), which supports the proposed interface model. These findings can be generalized to the structure of water at gas-water interfaces.

Thermal Oscillations of Nanobubbles

Nanobubble cavitation is advancing technologies in enhanced wastewater treatment, cancer therapy and diagnosis, and microfluidic cleaning. Current macroscale models predict that nanobubble oscillations should be isothermal, yet recent studies suggest that they are adiabatic with an associated increase in natural frequency, which becomes challenging when characterizing nanobubble sizes using ultrasound in experiments. We derive a new theoretical model that considers the nonideal nature of the nanobubble's internal gas phase and nonequilibrium effects, by employing the van der Waals (vdW) equation of state and implementing a temperature jump term at the liquid-gas interface, respectively, finding excellent agreement with molecular dynamics (MD) simulations. Our results reveal how adiabatic behavior could be erroneously interpreted when analyzing the thermal response of the gas using the commonly employed polytropic process and explain instead how nanobubble oscillations are physically closer to their isothermal limit.

Effect of a modulated acoustic field on the dynamics of a vibrating charged bubble

We investigate the effect of amplitude-modulated acoustic irradiation on the dynamics of a charged bubble vibrating in a liquid. We show that the potential V(x) of the bubble, and the number and stability of its equilibria, depend on the magnitude of the charge it carries. Under high-frequency amplitude-modulation, a modulation threshold, Gth, was found for the onset of increased bubble amplitude oscillations. For some pressure field values, charge can facilitate the control of chaotic dynamics via reversed period-doubling bifurcation sequences. There is evidence for peak-shouldering and shock waves. The Mach number increases rapidly with the drive amplitude G. In the supersonic regime, for G>1.90Pa, the high-frequency modulation raises both Blake's and the transient cavitation thresholds. We found a decrease in the bubble's maximum charge threshold, and threshold modulation amplitude for the occurrence Vibrational resonance (VR). VR occurs due to the modulated oscillatory pressure field, and the influence on VR of the electrostatic charge, and other parameters of the system are investigated. In contrast to the cases of VR reported earlier, where the amplitude G of the high-frequency driving is typically much higher than the amplitude of the low-frequency driving (Ps), the VR resonance peaks occur here at relatively low G values (0 Collapse

Key Words

• Acoustic waves
• Amplitude modulation
• Bubble oscillator
• Electrostatic charges
• Vibrational resonance

Collapse

MESH Headings Collapse

Grants Collapse

Affiliation(s)

O T Kolebaje Department of Physics, Adeyemi Federal University of Education, Ondo, Ondo State, Nigeria; Department of Physical Sciences, Redeemer's University, P.M.B. 230, Ede, Nigeria
U E Vincent Department of Physical Sciences, Redeemer's University, P.M.B. 230, Ede, Nigeria; Department of Physics, Lancaster University, Lancaster LA1 4YB, United Kingdom.
B E Benyeogor Department of Physical Sciences, Redeemer's University, P.M.B. 230, Ede, Nigeria
P V E McClintock Department of Physics, Lancaster University, Lancaster LA1 4YB, United Kingdom

Collapse

Evolution of Bulk Nanobubbles under Different Freezing Conditions

The freezing process of aqueous solutions plays a crucial role in various applications including cryopreservation, glaciers, and frozen materials. However, less research has focused on the influence of nanoscale gas bubble formation or collapse in water during freezing, which may significantly impact the formation of ice crystals. Herein, we report for the first time that the freezing process can produce nanobubbles in aqueous solutions, and their size and number concentration could be changed by different cooling rates, i.e., the size would decrease as the cooling rate increased, and the maximum number concentration was found at the -80 °C system. Furthermore, increasing the dissolved gas content in the solution enhanced the production of nanobubbles, whereas for preexisting nanobubbles, the freezing resulted in a decrease in their number concentration, which was negatively correlated with the cooling rate. Our results indicated that a moderate cooling rate of -80 °C favored nanobubble generation, whereas a higher cooling rate was preferable for maintaining preexisting nanobubbles. Conversely, a lower cooling rate could be employed to eliminate preexisting nanobubbles. This study explored the evolution and stability of nanobubbles during the freezing process, providing valuable insights into the application or elimination of nanobubbles.

Tunable Gas-Gas Reactions through Nanobubble Pathway

Combustible gas-gas reactions usually do not occur spontaneously upon mixing without ignition or other triggers to lower the activation energy barrier. Nanobubbles, however, could provide such a possibility in solution under ambient conditions due to high inner pressure and catalytic radicals within their boundary layers. Herein, a tunable gas-gas reaction strategy via bulk nanobubble pathway is developed by tuning the interface charge of one type of bulk nanobubble and promoting its fusion and reaction with another, where the reaction-accompanied size and number concentration change of the bulk nanobubbles and the corresponding thermal effect clearly confirm the occurrence of the nanobubble-based H2 /O2 combustion. In addition, abundant radicals can be detected during the reaction, which is considered to be critical to ignite the gas reaction during the fusion of nanobubbles in water at room temperature. Therefore, the nanobubble-based gas-gas reactions provide a safe and efficient pathway to produce energy and synthesize new matter inaccessible under mild or ambient conditions.

Nanobubbles in water and wastewater treatment systems: Small bubbles making big difference

Since the discovery of nanobubbles (NBs) in 1994, NBs have been attracting growing attention for their fascinating properties and have been studied for application in various environmental fields, including water and wastewater treatment. However, despite the intensive research efforts on NBs' fundamental properties, especially in the past five years, controversies and disagreements in the published literature have hindered their practical implementation. So far, reviews of NB research have mainly focused on NBs' role in specific treatment processes or general applications, highlighting proof-of-concept and success stories primarily at the laboratory scale. As such, there lacks a rigorous review that authenticates NBs' potential beyond the bench scale. This review aims to provide a comprehensive and up-to-date analysis of the recent progress in NB research in the field of water and wastewater treatment at different scales, along with identifying and discussing the challenges and prospects of the technology. Herein, we systematically analyze (1) the fundamental properties of NBs and their relevancy to water treatment processes, (2) recent advances in NB applications for various treatment processes beyond the lab scale, including over 20 pilot and full-scale case studies, (3) a preliminary economic consideration of NB-integrated treatment processes (the case of NB-flotation), and (4) existing controversies in NBs research and the outlook for future research. This review is organized with the aim to provide readers with a step-by-step understanding of the subject matter while highlighting key insights as well as knowledge gaps requiring research to advance the use of NBs in the wastewater treatment industry.

Simultaneous hydrodynamic cavitation and nanosecond pulse discharge plasma enhanced by oxygen injection

A novel Hydrodynamic Cavitation-Assisted Oxygen Plasma (HCAOP) process, which employs a venturi tube and oxygen injection, has been developed for enhancing the production and utilization of hydroxyl radicals (·OH) in the degradation of organic pollutants. This study has systematically investigated the fluid characteristics and discharge properties of the gas-liquid two-phase body in the venturi tube. The hydraulic cavitation two-phase body discharge is initiated by the bridging of the cavitation cloud between the electrodes. The discharge mode transitions from diffuse to spark to corona as the oxygen flow rate increases. The spark discharge has the highest current and discharge energy. Excessive oxygen results in the change of the flow from bubbly to annular and a subsequent decrease in discharge energy. The effects of cavitation intensity, oxygen flow rate, and power polarity on discharge characteristics and ·OH production were evaluated using terephthalic acid as a fluorescent probe. It was found that injecting 3 standard liter per minute (SLPM) of oxygen increased the ·OH yield by 6 times with only 1.2 times increase in power, whereas<0.5 SLPM of oxygen did not improve the ·OH yield due to lower breakdown voltage. Negative polarity voltage increased the breakdown voltage and ·OH yield due to asymmetric density and pressure distribution in the throat tube. This polarity effect was explained by numerical simulation. Using indigo carmine (E132) as a model pollutant, the HCAOP process degraded 20 mg/L of dye in 5 L water within 2 min following a first-order reaction. The lowest electric energy per order (EEO) was 0.26 (kWh/m3/order). The HCAOP process is a highly efficient flow-type advanced oxidation process with potential industrial applications.

Superparamagnetic Iron Oxide Nanoparticles as Additives for Microwave-Based Sludge Prehydrolysis: A Perspective

Wastewater treatment plants are critical for environmental pollution control. The role that they play in protecting the environment and public health is unquestionable; however, they produce massive quantities of excess sludge as a byproduct. One pragmatic approach to utilizing excess sludge is generating methane via anaerobic digestion. For this, a prehydrolysis step can significantly improve digestion by increasing biogas quality and quantity while decreasing final sludge volumes. One of the many prehydrolysis approaches is to deliver heat into sludge via microwave irradiation. Microwave-absorbing additives can be used to further enhance thermal degradation processes. However, the implications of such an approach include potential release of said additive materials into the environment via digested sludge. In this perspective, we present and discuss the potential of superparamagnetic iron oxide nanoparticles (SPIONs) as recoverable, hyperreactive microwave absorbers for sludge prehydrolysis. Due to their size and characteristics, SPIONs pack spin electrons within a single domain that can respond to the magnetic field without remanence magnetism. SPIONs have properties of both paramagnetic and ferromagnetic materials with little to no magnetic hysteresis, which can enable their rapid recovery from slurries, even in complicated reactor installations. Further, SPIONs are excellent microwave absorbers, which result in high local heat gradients. This perspective introduces the vision that SPION properties can be tuned for desirable dielectric heating and magnetic responses while maintaining material integrity to accomplish repeated use for microwave-enhanced pretreatment.

Oxidative Capacity of Oxygen Nanobubbles and Their Mechanism for the Catalytic Oxidation of Ferrous Ions with Copper as a Catalyst in Sulfuric Acid Medium

Nanobubble (NB) technology has demonstrated the potential to enhance or substitute for current treatment processes in various areas. However, research employing it as a novel advanced oxidation process has thus far been relatively limited. Herein, we focused on the oxidative capacity of oxygen NBs and investigated the feasibility of utilizing their enhanced oxidation of ferrous ions (Fe²⁺) in a sulfuric acid medium when using copper as a catalyst and their effect mechanism. It was demonstrated that oxygen NBs could collapse to produce hydroxyl radicals (·OH) in the absence of dynamic stimuli using electron spin resonance spectroscopy, and methylene blue was used as a molecular probe for ·OH to illustrate that NB stability, determined by their properties, is the critical factor affecting ·OH release. In subsequent Fe²⁺ oxidation experiments, it was discovered that both strong acidity and copper ions (Cu²⁺) contribute to accelerating the collapse of NBs to produce ·OH. While ·OH derived from the collapse of NBs acts on Fe²⁺, the molecular oxygen generated homologously with ·OH will further activate the catalytic oxidation of Fe²⁺ by interacting with Cu²⁺. With the synergistic effect of the above two oxidation-driven mechanisms, the oxidation rate of Fe²⁺ can be significantly increased up to 88% due to the exceptional properties of oxygen NBs, which facilitate the formation of an atmosphere with persistent oxygen supersaturation and the generation of oxidation radicals. This study provides significant insight into applying NBs as a prospective technology for enhanced oxidation processes.

Oxidation of Congo red by Fenton coupled with micro and nanobubbles

Dye wastewater is a kind of refractory organic wastewater. Fenton coupled with micro-nano bubbles (MNBs+FT) was used for the degradation of Congo red (CR), aiming at simplifying the organic pollutants degradation process and reducing the cost of the process. The optimum condition of Fenton alone, the outlet pressure of the cavitation process and different combinations on the degradation of CR dye wastewater were discussed in this study. The results showed that the degradation of CR (100 mg/L) could reach 94.4% by using the MNBs+FT at the pH of 7, which was 72% higher than that using Fenton oxidation alone and 79% higher than that using MNBs alone. Based on the same degradation efficiency, the traditional Fenton process alone required 8 times the dose of oxidants of these combination systems, and the synergy coefficient of MNBs+FT was up to 2.44. ESR analysis indicated that ·OH was the predominant active species during the degradation of CR and MNBs+FT improved the utilization efficiency of H2O2 and produced more ·OH. Besides, the MNBs+FT could extend the pH range of the high-efficiency oxidation reaction, and it could also keep a high degradation rate under neutral conditions, which eliminated the process of adjusting the pH and reduced the anti-corrosion requirements of the equipment. According to the economic analysis results, the total cost of treatment for the MNBs/FT was about 13% of the cost of only the Fenton process. This study provides a reference for the application of MNBs+FT systems in full-scale dye wastewater treatment.

Treatment of high-salinity brine containing dissolved organic matters by vacuum membrane distillation: A fouling mitigation approach via microbubble aeration

In this study, a laboratory-scale vacuum membrane distillation (VMD) system coupled with microbubble aeration (MBA) was developed for the treatment of high-salinity brine containing organic matters. Herein, at the beginning, feedwater only containing model organics such as humic acid (HA), bovine serum albumin (BSA) and sodium alginate (SA) was utilized to investigate the organic-fouling behavior, results indicated that the permeate flux was not affected by a thin and loose contaminated layer deposited on the membrane surface. Furthermore, dissolved organics in the feed brine inhibited the occurrence of membrane wetting due to the existence of a compact and protective crystals/organic-fouling layer, which can prevent the intrusion of scaling ions into membrane substrates. Besides, organics in the feedwater have a high tendency to adsorb on the membrane surface based on molecular dynamics simulations, thus, forming an organic-fouling layer prior to inorganic scaling. Finally, the effect of MBA on fouling alleviation was evaluated in VMD system, nearly 50% of salt precipitation from fouled membrane was effectively removed with the introduction of MBA, which can be ascribed to a combination of mechanisms, including surface shear forces and electrostatic attractions induced by microbubbles, meanwhile, about 2.2% of the total energy was only consumed, when using MBA. Together, these results demonstrated that MBA was a promising approach to alleviate membrane fouling in VMD.

Water quality improvement and consequent N2O emission reduction in hypoxic freshwater utilizing green oxygen-carrying biochar

Declines in dissolved oxygen (DO) levels in aquatic systems worldwide negatively influence biodiversity, nutrient biogeochemistry, drinking water quality, and greenhouse gas emission. As a response, oxygen-carrying dual-modified sediment-based biochar (O-DM-SBC) as a green and sustainable emerging material was utilized for simultaneous hypoxia restoration, water quality improvement, and greenhouse gas reduction. Column incubation experiments were carried out using the water and sediment samples from a tributary of the Yangtze River. The application of O-DM-SBC effectively increased the DO concentration from ~1.99 mg/L to ~6.44 mg/L and decreased the concentrations of TN and NH₄⁺-N by 61.1 % and 78.3 %, respectively, during the 30-day incubation period. Moreover, the N₂O emission was apparently inhibited by O-DM-SBC with a 50.2 % decrease in daily flux under the functional coupling of biochar (SBC) and oxygen nanobubbles (ONBs). Path analysis supported that the treatments (SBC, modification, and ONBs) had joint effects on N₂O emission by changing the concentration and composition of dissolved inorganic nitrogen (e.g., NH₄⁺-N, NO₂^--N and NO₃^--N). The nitrogen-transforming bacteria were found to be significantly promoted by O-DM-SBC at the end of the incubation, while the archaeal community seemed to be more active in the SBC groups without ONB, confirming their different mechanisms. The PICRUSt2 prediction results revealed that most nitrogen metabolism genes including nitrification (i.e., amoABC), denitrification (i.e., nirK and nosZ), and assimilatory nitrate reduction (i.e., nirB and gdhA) were largely enriched in O-DM-SBC, indicating the active nitrogen-cycling network was established, thus achieving simultaneous nitrogen pollution control and N₂O emission reduction. Our findings not only confirm the beneficial effect of O-DM-SBC amendment on nitrogen pollution control and N₂O emission mitigation in hypoxic freshwater, but also contribute to a more comprehensive understanding of the effect of oxygen-carrying biochar on nitrogen cycling microbial communities.

On Nanobubble Dynamics under an Oscillating Pressure Field during Salting-out Effects and Its DLVO Potential

We have investigated the origin, stability, and nanobubble dynamics under an oscillating pressure field followed by the salting-out effects. The higher solubility ratio (salting-out parameter) of the dissolved gases and pure solvent nucleates nanobubbles during the salting-out effect, and the oscillating pressure field enhances the nanobubble density further as solubility varies linearly with gas pressure by Henry's law. A novel method for refractive index estimation is developed to differentiate nanobubbles and nanoparticles based on the scattering intensity of light. The electromagnetic wave equations have been numerically solved and compared with the Mie scattering theory. The scattering cross-section of the nanobubbles was estimated to be smaller than the nanoparticles. The DLVO potentials of the nanobubbles predict the stable colloidal system. The zeta potential of nanobubbles varied by generating nanobubbles in different salt solutions, and it is characterized by particle tracking, dynamic light scattering, and cryo-TEM. The size of nanobubbles in salt solutions was reported to be higher than that in pure water. The novel mechanical stability model is proposed by considering both ionic cloud and electrostatic pressure at the charged interface. The ionic cloud pressure is derived by electric flux balance, and it is found to be twice the electrostatic pressure. The mechanical stability model for a single nanobubble predicts the existence of stable nanobubbles in the stability map.

Oxygen micro-nanobubbles for mitigating eutrophication induced sediment pollution in freshwater bodies

Sediment hypoxia is a growing problem and has negative ecological impacts on the aquatic ecosystem. Hypoxia can disturb the biodiversity and biogeochemical cycles of both phosphorus (P) and nitrogen (N) in water columns and sediments. Anthropogenic eutrophication and internal nutrient release from lakebed sediment accelerate hypoxia to form a dead zone. Thus, sediment hypoxia mitigation is necessary for ecological restoration and sustainable development. Conventional aeration practices to control sediment hypoxia, are not effective due to high cost, sediment disturbance and less sustainability. Owing to high solubility and stability, micro-nanobubbles (MNBs) offer several advantages over conventional water and wastewater treatment practices. Clay loaded oxygen micro-nanobubbles (OMNBs) can be delivered into deep water sediment by gravity and settling. Nanobubble technology provides a promising route for cost-effective oxygen delivery in large natural water systems. OMNBs also have the immense potential to manipulate biochemical pathways and microbial processes for remediating sediment pollution in natural waters. This review article aims to analyze recent trends employing OMNBs loaded materials to mitigate sediment hypoxia and subsequent pollution. The first part of the review highlights various minerals/materials used for the delivery of OMNBs into benthic sediments of freshwater bodies. Release of OMNBs at hypoxic sediment water interphase (SWI) can provide significant dissolved oxygen (DO) to remediate hypoxia induced sediment pollution Second part of the manuscript unveils the impacts of OMNBs on sediment pollutants (e.g., methylmercury, arsenic, and greenhouse gases) remediation and microbial processes for improved biogeochemical cycles. The review article will facilitate environmental engineers and ecologists to control sediment pollution along with ecological restoration.

Supplementation of CO2-nanobubble water to enhance the methane production from anaerobic digestion of corn straw

Nanobubble water (NBW) could improve methane production from anaerobic digestion (AD) of corn straw without secondary contamination. In this study, the effect of carbon dioxide nanobubble water (CO₂-NBW) volumes (0%, 25%, 50%, 75%, 100%) on methane production from corn straw was investigated. The results showed that addition of CO₂-NBW could improve methane production and promote substrate degradation in AD process. The highest cumulative methane production of 132.16 mL g^-1VS_added was obtained in the 100% CO₂-NBW added reactor, which was 17% higher than that in the control group. Additionally, the addition of CO₂-NBW could mitigate the sharp decrease in pH by acting as a buffer. CO₂-NBW could also enhance microorganism activity throughout the AD process. The electron transport system (ETS) activity was increased by 23%, while the β-glucosidase, dehydrogenase (DHA), and coenzyme F₄₂₀ activities were increased by 15%, 23%, and 11%, respectively, at optimum addition of CO₂-NBW. Meanwhile, addition of CO₂-NBW accelerated the production and consumption of reducing sugar and volatile fatty acids (VFAs), promoting the reduction rates of TS (Total solid) and VS (Volatile solid).

Hyaluronic acid hydrolysis using vacuum ultraviolet TiO2 photocatalysis combined with an oxygen nanobubble system

Advanced technologies for producing high-quality low molecular weight hyaluronic acid (LMW-HA) are required from the perspective of cost-efficiency and biosafety. Here, we report a new LMW-HA production system from high molecular weight HA (HMW-HA) using vacuum ultraviolet TiO₂ photocatalysis with an oxygen nanobubble system (VUV-TP-NB). The VUV-TP-NB treatment for 3 h resulted in a satisfactory LMW-HA (approximately 50 kDa measured by GPC) yield with a low endotoxin level. Further, there were no inherent structural changes in the LMW-HA during the oxidative degradation process. Compared with conventional acid and enzyme hydrolysis methods, VUV-TP-NB showed similar degradation degree with viscosity though reduced process time by at least 8-fold. In terms of endotoxin and antioxidant effects, degradation using VUV-TP-NB demonstrated the lowest endotoxin level (0.21 EU/mL) and highest radical scavenging activity. This nanobubble-based photocatalysis system can thus be used to produce biosafe LMW-HA cost-effectively for food, medical, and cosmetics applications.

Adsorption of perfluoroalkyl acids on granular activated carbon supported chitosan: Role of nanobubbles

The safety threat posed by Perfluoroalkyl acids (PFAAs) in drinking water is a growing concern. In this study, we loaded chitosan (CS) on granular activated carbon (GAC) to adsorb PFAAs, and we explored the role of nanobubbles in the adsorption process through experiments and density functional theory (DFT) calculations. Compared with GAC, we found that the use of the composite adsorbent (CS/GAC) enhanced the removal rate of perfluorooctanoic acid by 136% with the assistance of nanobubbles. PFAAs with different chain lengths have different adsorption mechanisms owing to surface activity differences. PFAAs with longer C-F chains can be directly enriched with amino groups on the CS or air-water interface on composite adsorbents. Additionally, PFAAs can be enriched with nanobubbles in solution to form nanobubble-PFAA colloids, which are adsorbed by protonated amino groups on CS through electrostatic interactions. We found that PFAAs with shorter C-F chains are less affected by nanobubbles, and DFT calculations indicated that the adsorption of short-chain PFAAs is mainly affected by electrostatic interactions. We also proved that the electrostatic interactions between CS and PFAAs are mainly derived from the abundant protonated amino groups.

Analysis of Gas Nanoclusters in Water Using All-Atom Molecular Dynamics

The Young-Laplace equation suggests that nanosized gas clusters would dissolve under the effects of perturbation. The fact that nanobubbles are observed raises questions as to the mechanism underlying their stability. In the current study, we used all-atom molecular dynamics simulations to investigate the gas-water interfacial properties of gas clusters. We employed the instantaneous coarse-graining method to define the fluctuating boundaries and analyze the deformation of gas clusters. Fourier transform analysis of the cluster morphology revealed that the radius and morphology deformation variations exhibit power law relationships with the vibrational frequency, indicating that the surface energy dissipated through morphology variations. Increasing pressure in the liquid region was found to alter the network of water molecules at the interface, whereas increasing pressure in the gas region did not exhibit this effect. The overall gas concentration was oversaturated and proportional to the gas density inside the clusters. However, the result of comparison with Henry's law reveals that the gas pressure at the interface reduced by the interfacial effects is much lower than that inside the gas region, thus reducing the demanding degree of oversaturation. Originating from the interfacial charge allocation, the magnitude of the electrostatic stress is greater than that of the gas pressure inside the cluster. However, the magnitude of the reversed tension induced by electrostatic stress is far below the value of interfacial tension. The potential of mean force (PMF) profiles revealed that a barrier potential at the interface hindered gas particles from escaping the cluster. Several effects contribute to stabilizing the gas clusters in water, including high-frequency morphological deformation, electrostatic stress, reduced interfacial tension, and gas oversaturation conditions. Our results suggest that gas clusters can exist in water under gas oversaturation conditions in the absence of hydrophobic contaminants or pinning charges at interfaces.

A new pattern of the partial nitrification and Anammox immobilized gel beads: core-shell embedded carrier

Single-stage partial nitrification and Anammox (PN/A) is an efficient and energy-saving denitrification process for wastewater. However, its application is limited by the growth conditions of microorganisms. Therefore, we improved the PN/A by developing a novel core-shell embedded carrier. With Anammox gel as the core and Ammonia-oxidizing bacteria gel as the shell, these beads can achieve dissolved oxygen partitioning and provide a suitable environment for the growth of different bacteria. On this basis, the influence of the shape of core-shell embedded gel on nitrogen removal performance was systematically studied, and the internal morphology and pore size of gel beads were characterized. The results showed that the nitrogen removal efficiency of spherical and square gels was increased by 33.70% and 13.47%, respectively, in the batch test. Fluorescence in situ hybridization confirmed the stratified growth of ammonia-oxidizing bacteria and Anammox in carriers, and the relative abundance value of the two bacteria were 1.25:1 and 1.43:1, respectively. Although the mechanical strength of square gel beads is slightly higher than that of spherical, spherical gel is considered the most suitable gel shape due to its small pore size and poor pore connectivity, which ensures the matching of internal Anammox and external PN reaction. In the long-term experiment, the core-shell embedded beads still had the design characteristics, and the TN removal efficiency was increased by 36.25% despite occasional oxygen excess.

Co-coagulation of micro-nano bubbles (MNBs) for enhanced drinking water treatment: A study on the efficiency and mechanism of a novel cleaning process

MNBs (Micro-nano bubbles) are widely used in cleaning processes for environmental treatments, but few studies have examined the interaction of MNBs with coagulation. In this study, a novel process, i.e., MNBs-coagulation, was developed for enhanced drinking water treatment. The humic acid (HA) removal efficiency was used to evaluate the effectiveness of MNBs-coagulation for drinking water treatment. The hydrolysis component ratio of polymeric aluminum chloride (PACl) with and without MNBs, the complexation strength of HA and PACl, and flocculent functional group characterization were used to analyze the mechanism of the MNBs-coagulation process to enhance drinking water treatment. The results of a Jar test showed that the MNBs-coagulation process could improve the removal efficiency of HA (up to a 27.9% increase in DOC removal). In continuous-flow experiments to remove HA, MNBs-coagulation can increase the removal efficiency of UV₂₅₄ by about 26.5% and with no significant change in turbidity. These results are attributed to the inherent hydroxyl radical generating properties of MNBs, the forced hydrolysis of PACl by MNBs to increase the Al_c percentage, and the ability of MNBs to increase the complexation strength of HA with PACl. At the same time, the MNBs-coagulation process has a strong anti-interference ability, almost no interference from anions and cations such as Cl^-, SO₄^2- and Ca²⁺, and has a good performance in natural surface water. In summary, MNBs-coagulation has strong potential for practical applications to enhance the efficiency of drinking water treatment.

Microbubble- and nanobubble-aeration for upgrading conventional activated sludge process: A review

The activated sludge process (ASP) is widely used for wastewater treatment, and the aeration efficiency is crucial to the operation of wastewater treatment plants. Recently, microbubble (MB)- and nanobubble (NB)-aeration has attracted much attention as there is growing evidence that it holds a great promise for upgrading the process efficiency of current ASP under conventional macro-bubble-aeration. However, a comprehensive review to elucidate the potential application of MB- and NB-aeration in ASP is still lacking. Therefore, this review will provide a systematic introduction to MB- and NB-aeration (including the unique properties and generation methods of MBs and NBs), and gain mechanistic insights on how MB- and NB-aeration improve gas-liquid mass transfer. The recent advances in MB- and NB-aeration applications to ASP and the resultant effects are also highlighted and discussed in-depth. The review concludes with a brief consideration of future research interests.

Degradation Mechanism of Micro-Nanobubble Technology for Organic Pollutants in Aqueous Solutions

Micro-nanobubbles (MNBs) technology has emerged as an effective means of sewage treatment, while the molecular mechanism for its pollutant degradation is still unknown. In this paper, the reactive molecular dynamics simulation technique is used to study the degradation mechanism of pollutants caused by shock-induced nanobubble collapse. We first demonstrate that the propagating shock wave can induce nanobubble collapse, and the collapsing nanobubble has the ability to focus mechanical energy via the converging motion of liquid in the interior of the bubble, leading to the formation of a high-speed jet with a much higher energy density. We also unveil the mechanical nature of long-chain pollutant degradation and the mechanism of free radical generation. Due to the impacting jet, the high-gradient flow has the ability to stretch the long-chain molecule and cause mechanical scission of the molecule in a homolytic manner. Finally, our simulation results reveal that adding ozone molecules to the collapsing bubble would introduce an additional dehydrogenation mechanism.

Formation of Bulk Nanobubbles Induced by Accelerated Electrons Irradiation: Dependences on Dose Rates and Doses of Irradiation

Radiation on aqueous solutions can induce water radiolysis with products of radicals, H₂, H₂O₂, and so on, and their consequent biological effects have long been interested in radiation chemistry. Unlike the decomposition of water by electric current that produces a significant number of bubbles, the gas products from the radiolysis of water are normally invisible by bare eyes, little is known on whether nanosized bubbles can be produced and what their dynamics are upon irradiation. Here, we first presented the formation of nanoscale bulk bubbles by irradiating pure water with accelerated electrons and their concentration and size distribution changes with the dose and rate of irradiation. The nanoparticle tracking analysis showed that irradiation can actually produce a certain amount of bulk nanobubbles in pure water. They exhibited a dependence on the irradiation dose rates and irradiation doses. The results indicated that the concentration of formed bulk nanobubbles increased as the irradiation dose rates increased, but it will increase and then decrease with the increased irradiation doses. The formed bulk nanobubbles could maintain stability for several hours. Our findings will provide a new angle of view for the radiation chemistry of water, and the formed nanobubbles may help elucidate the biological effects of irradiated solutions.

Interaction Mechanisms and Application of Ozone Micro/Nanobubbles and Nanoparticles: A Review and Perspective

Ozone micro/nanobubbles with catalytic processes are widely used in the treatment of refractory organic wastewater. Micro/nanobubble technology overcomes the limitations of ozone mass transfer and ozone utilization in the application of ozone oxidation, and effectively improves the oxidation efficiency of ozone. The presence of micro/nanobubbles keeps the catalyst particles in a dynamic discrete state, which effectively increases the contact frequency between the catalyst and refractory organic matter and greatly improves the mineralization efficiency of refractory organic matter. This paper expounds on the characteristics and advantages of micro/nanobubble technology and summarizes the synergistic mechanism of microbubble nanoparticles and the mechanism of catalyst ozone micro/nanobubble systems in the treatment of refractory organics. An interaction mechanism of nanoparticles and ozone microbubbles is suggested, and the proposed theories on ozone microbubble systems are discussed with suggestions for future studies on systems of nanoparticles and ozone microbubbles.

Effect of air nanobubbles on oxygen transfer, oxygen uptake, and diversity of aerobic microbial consortium in activated sludge reactors

Nanobubbles have the potential to curtail the loss of oxygen during activated sludge aeration due to their extensive surface areas and lack of buoyance in solution. In this study, nanobubble aeration was explored as a novel approach to enhance aerobic activated sludge treatment and benchmarked against coarse bubble aeration at the lab scale. Nanobubble aerated activated sludge reactors achieved greater dissolved oxygen levels at faster rates. Higher soluble chemical oxygen demand removal by 10% was observed when compared to coarse bubble aeration with the same amount of air. The activated sludge produced compact sludge yielding easier waste sludge for subsequent sludge handling. The samples showed fewer filamentous bacteria with a lower relative abundance of floc forming Corynebacterium, Pseudomonas, and Zoogloea in the sludge. The microbiome of the nanobubble-treated activated sludge showed significant shifts in the abundance of community members at the genus level and significantly lower alpha and beta diversities.

Alternative methods for cleaning membranes in water and wastewater treatment

Membrane fouling is caused by foulant deposition or adsorption through physical or chemical interactions on the membrane surface, causing the reduction of flux through the membrane. The main drawbacks of chemical agents used for cleaning are cost, damage caused on the membrane, and waste stream making the process unattractive. Alternative, methods such as ultrasound, enzymatic process, and osmotic backwashing were explored for membrane cleaning. Among all mentioned methods, micronanobubbles have been reported as a promising and emergent method for membrane surface cleaning; unfortunately, the information is limited, but preliminary studies have shown it as an efficient, cheap, and environmentally friendly technique. Other methods like electrically and vibratory-enhanced membrane cleaning also could be interesting but currently are unexplored and information is limited. PRACTITIONER POINTS: Chemical cleaning is an efficient option; however, from an environmental point of view, it is not attractive, and high concentrations could cause damage to the membrane. Micronanobubbles are an emergent and suitable technology for membrane and surface cleaning. Membrane modification and functionalization avoid membrane fast fouling, and the cleaning process is easier, but the manufacture cost could be expensive.