Transport of Nano- and Microplastic through Unsaturated Porous Media from Sewage Sludge Application

Impact of plastic nanoparticle (PNP) characteristics on the mobility of oxaliplatin in saturated soil

Plastics are used extensively across multiple industries, leading to widespread environmental contamination, including the formation of microplastics and plastic nanoparticles (PNPs). Secondary PNPs, generated through environmental weathering, differ significantly from primary PNPs in their size, shape, and surface chemistry but transport experiments using secondary PNPs are scarcely reported in the literature due to analytical challenges. In this study, we examine the impact of different PNPs - focusing on five secondary PNPs representing the most abundant plastic products, landfill-derived PNPs (>20 years old) that were extracted from landfill soil, and classically-studied polystyrene nanobeads - on the transport of a representative contaminant (oxaliplatin, an essential and common anticancer drug). Using fully water-saturated soil and environmentally-relevant oxaliplatin and PNP concentrations, we evaluated how variations in PNP properties, such as size, morphology, surface charge, and density influence oxaliplatin mobility. Our results indicate that secondary PNPs affect oxaliplatin transport vastly differently compared to the polystyrene nanobeads, linking the differences to the PNP morphology, (bulk) density, size and zeta potential distributions. This work emphasizes the need to incorporate more realistic PNPs to better understand their impact on transport dynamics of contaminants in soil systems.

Combining size distribution and shape of plastic and oxide particles to evaluate physicochemical interactions: Aggregation and attachment

Particles naturally have size distributions and shapes, but these are overlooked in the physicochemical theory used to estimate interaction energies for particle aggregation or attachment. Consequently, the objectives of this research were to implement size distribution and shape in physicochemical interactions, and to use machine learning (ML) to investigate physicochemical parameters to interpret aggregation or attachment. A deep neural network was trained on databases generated for the interactions of spheres, ellipsoids, and cylinders. The primary sizes of particles were measured and then used in a machine learning model to predict interaction profiles considering size distributions. Spherical polystyrene and polymethyl-methacrylate were used in stability and aggregation experiments. Bullet- and fragment-like silica particles were used in attachment experiments. Subsequently, ML predictions were used to interpret the results of the experiments. The size distribution provides an active zone for physicochemical interactions that is absent using the traditional mean particle diameter (one equivalent sphere or ellipsoid). This is relevant because the size distribution increases the estimates of favorable and unfavorable aggregation and attachment. For example, these zones increase as the particle size distribution increases (high polydispersity index). Finally, although the approach is appropriate for spherical, ellipsoidal, and bullet-like particles, it is inappropriate for fragment-like particles, such as microplastics.

Interaction of non-biodegradable particles and granular sludge in Nereda®-- from nanoparticles to microparticles

>50 % of the organic matter in sewage consist of particulate chemical oxygen demand (pCOD). This study used 250 μm fluorescent microbeads, 130±58 μm microparticles and 100 nm nanobeads to simulate sewage particles, and investigated the fate of these particles under both plug flow feeding and aeration phases in an aerobic granular sludge (AGS) system. Filtration performance was dominantly influenced by the particle size rather than the upflow velocity (Vupflow). The microbeads exhibited 95±3 % filtration efficiency with obvious accumulation around the AGS bed bottom, even as slight fluidization started at the Vupflow of 5.0 m·h-1. In contrast, the nanobeads filtration efficiency was significantly lower (43±6 %). During the aeration phase, the attachment efficiency increased with the decrease of particle size. The microbeads attachment efficiency variated between 39-49 %, whereas the microparticles and nanobeads achieved better attachment of 89.4-95.2 % and 98.8-99.3 %, respectively. Furthermore, aeration batch tests showed both nanobeads and the irregular microparticles attachment by AGS was strong, and the detach-attach of nanobeads/microparticles between different sized AGS was very limited duration aeration. This work provides insight into the fate of particles in AGS system. The optimal sludge treatment was also evaluated in the scope of this removal of non-biodegradable, and potentially harmful particles.

Minimal vertical transport of microplastics in soil over two years with little impact of plastics on soil macropore networks

Plastics used in agriculture improve productivity and resource efficiency. As they fragment over time, microplastics are unintentionally released into soil, raising concerns regarding long-term implications for soil structure and fertility. Here we investigated microplastics transport and their impact on soil structure through a two-year field experiment. 45 re-packed soil columns were installed with three treatments: indium-doped polyethylene terephthalate fragments or fibers in the top 2 cm and a control with no microplastics. Soil pore structure was monitored with X-ray tomography, and microplastics vertical transport was assessed via the indium tracer. With time macropore volume, biopore fraction and critical pore diameter increased independent of microplastic addition. Microplastic transport was minimal, with only ~1% reaching below 8 cm soil depth in two years. This experimental design, simulating natural soil conditions, suggests that microplastics have a negligible influence on soil macropore architecture and its transport rate is limited in the short term.

Microplastic pollution of thermal waters in Kütahya, Turkey

Microplastics (MPs) are emerging pollutants in aquatic systems, but their presence in groundwater, particularly thermal waters, is understudied. This study investigates the prevalence and characteristics of MPs in the thermal waters of Kütahya, Turkey, marking the first such exploration in the country and globally in thermal groundwater systems. Twenty-one samples (3 L each) were collected across nine regions and filtered using GF/C filters (0.45-µm pore size). Microscopic examination and μ-Raman spectroscopy revealed an average MP concentration of 0.85 ± 0.71 MPs/L (850 MPs/m3), with the highest at ST-8 (4.88 ± 2.98 MPs/L). Fibers (50%), fragments (39.8%), and films (10.2%) were identified, with polyethylene (22.2%) being the most common polymer type. Variability in MP abundance across stations suggests multiple contamination sources, including agricultural runoff, anthropogenic activities, and material used in water transport infrastructure. The findings indicate low-level MP contamination in thermal groundwater systems, which could influence both ecological health and human activities relying on these waters, such as thermal tourism and greenhouse irrigation. This pioneering study highlights the necessity for integrated waste management policies to mitigate MP pollution and underscores the role of thermal waters in understanding the transport dynamics of MPs in groundwater systems.

Ice nucleation onto model nanoplastics in the cirrus cloud regime

The proportion of ice crystals in clouds can affect cloud albedo and lifetime, impacting the Earth's radiative budget. Ice nucleating particles (INPs) lower the energy barrier of ice nucleation and thus facilitate primary ice formation in the atmosphere. Atmospheric nanoplastics (NPs) have been detected in remote regions far from emission sources, suggesting that they can become airborne and undergo long-range transport in the atmosphere. During the atmospheric residence of NPs, they could catalyse primary ice crystal formation by acting as INPs. In this study, we present results from laboratory experiments in which model NPs composed of polystyrene and polyacrylonitrile were tested for their ice-nucleating ability using the horizontal ice nucleation chamber (HINC) as a function of ice-nucleation temperature and water saturation ratio. The results showed that NPs can be effective INPs under both cirrus and cold mixed-phase cloud conditions. The surface characteristics and wettability of the NPs were analysed via scanning electron images and dynamic vapour sorption measurements, which revealed the freezing mechanism as a combination of deposition nucleation and pore condensation and freezing. The results highlight the need to enumerate and characterise NPs in the atmosphere, given their potential to get scavenged by clouds via primary ice formation in clouds.

Spatial and temporal variations of microplastics in the lower Chao Phraya River, Thailand: an investigation during the COVID-19 pandemic period

This study systematically investigated the abundance, characteristics, and spatial and temporal variations of microplastics (MPs) in the lower Chao Phraya River, Thailand, during the COVID-19 pandemic. The study revealed an average MP abundance of 8.3 ± 5.8 particles/m3, mainly composed of polyethylene (PE) and polypropylene (PP) with fibers and fragments being the predominant shapes. Spatially, MP concentrations exhibited a notable increase downstream, particularly in highly urbanized areas. Temporally, MP concentrations showed slight elevation during the wet season, with clear seasonal variations in MP size and shape distributions attributed to the influence of urban storm runoff. Despite expectations of heightened MP pollution due to the COVID-19 pandemic, the study suggests a potential reduction in MP abundance, likely attributed to decreased socio-economic activities. Nonetheless, the long-term effects remain uncertain, underscoring the imperative for continuous monitoring and effective environmental management strategies.

Nanoplastics: Immune Impact, Detection, and Internalization after Human Blood Exposure by Single-Cell Mass Cytometry

The increasing exposure to nanoplastics (NPs) raises significant concerns for human health, primarily due to their potential bioaccumulative properties. While NPs have recently been detected in human blood, their interactions with specific immune cell subtypes and their impact on immune regulation remain unclear. In this proof-of-concept study, model palladium-doped polystyrene NPs (PS-Pd NPs) are utilized to enable single-cell mass cytometry (CyTOF) detection. The size-dependent impact of carboxylate polystyrene NPs (50-200 nm) is investigated across 15 primary immune cell subpopulations using CyTOF. By taking advantage of Pd-doping for detecting PS-Pd NPs, this work evaluates their impact on human immune-cells at the single-cell level following blood exposure. This work traces PS-Pd NPs in 37 primary immune-cell subpopulations from human blood, quantifying the palladium atom count per cell by CyTOF while simultaneously assessing the impact of PS-Pd NPs on cell viability, functionality, and uptake. These results demonstrate that NPs can interact with, interfere with, and translocate into several immune cell subpopulations after exposure. In vivo distribution experiments in mice further confirmed their accumulation in immune cells within the liver, blood, and spleen, particularly in monocytes, macrophages, and dendritic cells. These findings provide valuable insights into the impact of NPs on human health.

Uncovering layer by layer the risk of nanoplastics to the environment and human health

Nanoplastics (NPs), defined as plastic particles with dimensions less than 100 nm, have emerged as a persistent environmental contaminant with potential risk to both environment and human health. Nanoplastics might translocate across biological barriers and accumulate in vital organs, leading to inflammatory responses, oxidative stress, and genotoxicity, already reported in several organisms. Disruptions to cellular functions, hormonal balance, and immune responses were also linked to NPs exposure in in vitro assays. Further, NPs have been found to adsorb other pollutants, such as persistent organic pollutants (POPs), and leach additives potentially amplifying their advere impacts, increasing the threat to organisms greater than NPs alone. However, NPs toxic effects remain largely unexplored, requiring further research to elucidate potential risks to human health, especially their accumulation, degradation, migration, interactions with the biological systems and long-term consequences of chronic exposure to these compounds. This review provides an overview of the current state-of-art regarding NPs interactions with environmental pollutants and with biological mechanisms and toxicity within cells.

Semi-supervised learning-based identification of the attachment between sludge and microparticles in wastewater treatment

Monitoring the microparticle transfer process in wastewater treatment systems is crucial for improving treatment performance. Supervised deep learning methods show high performance to automatically detect particles, but they rely on vast amounts of labeled data for training. To overcome this issue, we proposed a semi-supervised learning (SSL) method based on the Simple framework for Contrastive Learning of visual Representations (SimCLR), to detect microparticles free from sludge and attached to sludge. First, we pre-trained a ResNet50 backbone by SimCLR, to extract features from much unlabeled data (1,000 images). Then, we constructed a Mask R-CNN architecture based on the pre-trained ResNet50, and fine-tuned it on a small quantity of labeled data (≈200 images with ≈600 annotated particles) in supervised learning fashion. We showcased its performance and practical applicability for microscopy images obtained from the water lab of TU Delft. The results demonstrate that the SSL methods obtain a significant improvement in mean average precision of up to 5% compared to the conventional supervised learning method, when a limited amount of labeled data is available (e.g., 91 labeled images). Furthermore, these methods improve the average precision for detecting attached particles by over 12%. With the detection results from the SSL methods, we measured the attachment efficiency of microparticles to sludge under varying mixed liquor suspended solids concentration and aeration intensity. The precise measurements demonstrate the effectiveness and practical applicability of the SSL method in facilitating long-term monitoring of particle transfer processes in biological wastewater treatment systems.

Cotransport of fullerene nanoparticles and clay colloids in porous media: The relation between aggregation and transport

In the study, cotransport of fullerene nanoparticles (nC60) and mobile clay colloids (illite (ILL), kaolinite (KL), montmorillonite (ML)) in aquifer porous media and its relation to the aggregative interaction between these two types of particles was investigated. Minimal interaction occurred between nC60 and ILL, resulting in unaffected transport. Strong heteroaggregation between ML and nC60 resulted in not only significant retention of both particles during their cotransport but also the retention of nC60 in the media pre-injected with ML. Strong homoaggregation of KL caused strong straining effect and consequently retention of both KL and nC60 during their cotransport, however, the pre-emplacement of KL did not cause retention of nC60 during the sequential injection of KL and nC60. Such aggregation behaviors were well demonstrated by the adsorption-sedimentation experiment, microscopic observation, the size and zeta-potential test, and model simulation. Based on the surface chemistry analysis, divalent-cation bridging between ML and nC60 and hydrogen bonding between KL particles were responsible for the heteroaggregation and the homoaggregation, respectively. The study demonstrated the specificity of the aggregation between the mobile clays and nC60 to the chemistry of the clays and its consequent effect on the cotransport of the particles, which is critical for assessment of the environmental risk of nC60.

Factors Influencing the Vertical Migration of Microplastics up and down the Soil Profile

Soil ecosystems are under serious threat from microplastics (MPs), and this is causing worldwide concern. The relationship between soil and MPs has become a popular research topic, and the vertical migration of soil MPs is of increasing interest. This Review summarizes the current status of research into the factors affecting the vertical migration of soil MPs. Published research shows that the characteristics of MPs and the physicochemical properties of the soil affect the infiltration process. Soil organisms play a key role in the vertical migration by acting as vectors or as a result of adsorption. Dissolved organic matter and metal oxides transfer MPs by adsorption-desorption. In addition, rainfall and dry-wet cycles alter the mobility of soil MPs, leading to changes in migration processes. Agricultural activities such as tillage and irrigation may distribute MPs throughout the topsoil. Vertical migration of soil MPs is a process influenced by a combination of factors, and the role of these factors in MP deposition needs to be explored further.

Impact of freeze-thaw cycles on the remobilization behaviors of microplastics in natural soils

Freeze-thaw (FT) cycle would greatly influence the fate of plastic particles (one of emerging contaminants with great concerns) in soils, yet its impacts and mechanisms remain unclear. The vertical migration/release behaviors of plastic particles (with diameters of 0.2 μm and 1 μm) in two natural soils and one model soil (i.e. quartz sand) without/with FT treatments (1 and 3 cycles) were examined. Owing to the presence of Fe/Al oxide minerals, finer pore structure, and uneven surfaces of natural soils, the breakthrough ratio of plastics in two natural soils was over 25% lower than in quartz sand. However, regardless of porous media type, FT processes (increasing cycles) significantly promoted the remobilization of plastics initially retained in three media during the subsequent water flushing processes. Via theoretical calculation, tracer experiments, and visible chamber experiments, the mechanisms driving plastics release from natural soils subjected to FT treatments during the water elution processes were determined to be different from those from pure quartz sand. The change of sand local configuration (the rearrangement of local sand pore spaces) during FT process mainly drove to plastics released from quartz sand columns. While the alteration in local soil configuration, the formation of preferential pathways, and increased release of soil particles contributed to plastics remobilization from soil columns subjected to FT. Clearly, FT processes significantly increased the vertical migration of plastics in soils potentially to groundwater, enhancing environmental risks of plastics.

Effect of particle size on the transport of polystyrene micro- and nanoplastic particles through quartz sand under unsaturated conditions

Micro- and nanoplastics (MNPs) are contaminants of emerging concern recently found in soil ecosystems. Their presence in terrestrial environments and their migration to aquatic environments may become a risk for the health of ecosystems and, through them, of humans. Understanding the interaction between particle properties and physicochemical and hydrodynamic factors is crucial to evaluate their fate and their potential infiltration towards groundwater. This study investigates the impact of particle size on MNPs transport through sand under unsaturated conditions. Infiltration column experiments with polystyrene MNPs ranging from 120 to 10,000 nm were conducted and supported by numerical modelling to derive reactive transport parameters. Results show a significant effect of particle size on the transport of MNPs, with higher recovery values observed for smaller particles (120 nm; 95.11%) compared to larger particles (1000 nm; 71.44%). No breakthrough was observed for 10,000 nm particles, indicating a complete retention within the quartz sand matrix. DLVO theory confirmed the dominance of electrostatic repulsive forces between MNPs and sand grains, suggesting an unfavourable environment for MNPs to adhere to quartz sand. Consequently, particle retention in the sand matrix occurs predominantly by physical processes. Equilibrium sorption modelling reveals that larger particles (1000 nm) tend to be immobilized in small pores throats due to straining, resulting in lower recoveries. When they are not trapped, particles tend to travel faster through preferential flows due to a size exclusion effect, evidenced by shorter arrival times at the column outlet compared to tracers. These findings highlight the influence of particle size on the transport and retention of MNPs in quartz sand under unsaturated conditions and contribute to a better understanding of their transport dynamics and environmental fate.

A comparative study on the stability and coagulation removal of aged vs. nonaged nanoplastics in surface water

Nanoplastics (NPs) are released into surface water due to the widespread use of plastics, undergoing aging from environmental and human factors that alter their physical and chemical characteristics. However, detecting NPs remains challenging, resulting in limited research on their behavior in surface water and their removal efficiency by drinking water treatment. This study utilizes palladium-doped polystyrene nanoplastics (PSNPs) as tracers to enable precise detection and quantification through ICP-MS, thereby overcoming the limitations of conventional detection methods. PSNPs are aged using solar irradiation and ozone to simulate both natural and artificial aging processes, affecting the physical and chemical properties of NPs, which in turn influence their behavior in water treatment systems. Moreover, the study investigates the impact of various coagulation conditions, including different coagulants (AlCl3 and PACl), pH levels (4-9), and humic acid (HA) concentrations (0-10 mg/L), on the of both aged and nonaged NPs. The results demonstrate solar aging triggers significant morphological changes in PSNPs, while ozone aging induces more oxygen functional groups on PSNPs (CIozone=20.99; CIsolar=0.70), increasing sensitivity to HA concentrations and resulting in reduced removal efficiencies for ozone aged PSNPs by AlCl3 (68.68 %) and PACl (74.74 %). In addition, PACl achieves higher PSNPs removal efficiencies (REmin=88.59 %) than that of AlCl3 (REmin=85.57 %) under varied pH levels. This research fills a gap in understanding aged NPs behavior in surface water and offers practical solutions for optimizing coagulation for NPs removal, enhancing our ability to predict NPs environmental fate and manage NPs pollution to ensure drinking water safety.

Colloid mobilization and transport in response to freeze-thaw cycles: Insights into the heavy metal(loid)s migration at a smelting site

Smelting sites often exhibit significant heavy metal(loid)s (HMs) contamination in the soil and groundwater, which are inevitably subjected to environmental disturbances. However, there is limited information available regarding the migration behaviors of HMs in a disturbed scenario. Thus, this work explored the migration of HMs-bearing colloids in response to freeze-thaw treatments by laboratory simulation and pore-scale study. Ultrafiltration results of soil effluents revealed that 61.5 %, 47.6 %, 68.0 %, and 59.2 % of Zn, Cd, Pb, and As were present in colloidal phase, and co-transported during treatments. Nanoparticle tracking analysis (NTA) further confirmed that freeze-thaw cycles were conducive to the generation of colloidal particles and showed the heteroagglomeration among different particles. Pore-network model (PNM) was used to quantify the soil macropore characteristics (macropore diameter, macropore number, coordination number, and Euler value) after treatments. It is evident that freeze-thaw cycles induced the formation of larger macropores while simultaneously enhancing macropore connectivity, thereby establishing an optimal pathway for colloid migration. These findings underscored the importance of environmental disturbances as a trigger for the release and migration of HMs in the smelting site, offering valuable insights for controlling HMs pollution. ENVIRONMENTAL IMPLICATION: The contaminated site has been subjected to prolonged environmental disturbances, causing the exacerbation of pollutants leaching and frequent occurrences of unstable pollution situations. This work explored the migration of HMs-bearing colloids in response to freeze-thaw treatments by laboratory simulation and pore-scale study. The distinct effects of freeze-thaw treatment on colloidal particle number concentration and macropore characteristics may explain the generation and migration of colloid-associated HMs driven by environmental disturbances. This work revealed the underlying mechanisms driving the redistribution of HMs under freeze-thaw cycles, offering valuable insights for risk assessment of soil and groundwater associated with HMs migration.

A review of the influence mechanisms of climate-induced events on groundwater microplastic contamination: A focus on aquifer vulnerabilities and mitigation strategies

Climate change and plastic pollution are two main issues that our world is currently facing, and they are mainly linked through various processes, mechanisms, and chemical blueprint. Emerging issues related to microplastic (MP) contamination in freshwater are expanding and diverse research is being carried out globally. Factors causing climate change are increasing the frequency of extreme weather phenomena such as floods, drought, sea level rise, and heat waves, which can directly or indirectly influence the plastic/MP contamination in various ecosystems including groundwater environments. Here, we review the impacts of extreme weather events on MP contamination in freshwater with a specific focus on groundwater environments. This narrative review shows that flooding can have the most adverse effect on the MP pollution in groundwater environments through recharge events. Drought can also have major effects on MP pollution. Karst, alluvial, and coastal aquifers exhibit the highest levels of MP contamination among various aquifer types. Climate change's impact on different types of aquifers can vary depending on hydrogeological conditions and other factors in the groundwater environment. Prevention and comprehensive solutions are crucial for addressing MPs in the environment, with downstream measures being supplementary to upstream ones.

Topic modeling discovers trending topics in global research on the ecosystem impacts of microplastics

The ecological threats of microplastics (MPs) have sparked research worldwide. However, changes in the topics of MP research over time and space have not been evaluated quantitatively, making it difficult to identify the next frontiers. Here, we apply topic modeling to assess global spatiotemporal dynamics of MP research. We identified nine leading topics in current MP research. Over time, MP research topics have switched from aquatic to terrestrial ecosystems, from distribution to fate, from ingestion to toxicology, and from physiological toxicity to cytotoxicity and genotoxicity. In most of the nine leading topics, a disproportionate amount of independent and collaborative research activity was conducted in and between a few developed countries which is detrimental to understanding the environmental fates of MPs in a global context. This review recognizes the urgent need for more attention to emerging topics in MP research, particularly in regions that are heavily impacted but currently overlooked.

Agricultural film-derived microplastics elevate the potential risk of pesticides in soil ecosystem: The inhibited leaching by altering soil pore

The residue of mulch film is a crucial source of microplastics (MPs) in agricultural fields. The effects of mulch film-derived MPs on the environmental behavior of pesticides in agriculture remain unclear. In the present study, the effects of MPs of different sizes (5 mm, 1 mm, 30 µm, and 0.3 µm) at environmentally relevant concentrations on pesticide transport were evaluated, and the mechanism was explored with respect to adsorption and pore structure using fluorescence visualization, the extended Derjaguin-Landau-Verwey-Overbeek model, and microcomputed tomography. MPs were found to be retained in the soil due to size limitation, pore capture, and surface adhesion. The presence of mm-sized MPs (5 and 1 mm) at a concentration of 0.25 % inhibited the leaching behavior of atrazine, metolachlor, and tebuconazole. MPs did not significantly alter the pesticide adsorption ability of the soil. The reduced leaching originated from the impact of MPs on soil pore structure. Specifically, the porosity increased by 16.2-25.0 %, and the connectivity decreased by 34.5 %. These results demonstrate that mm-sized MPs inhibit pesticide leaching by obstructing the pores and altering the transport pathways, thereby potentially elevating environmental risks, particularly to the soil ecosystem.

Enhanced sinks of polystyrene nanoplastics (PSNPs) in marine sediment compared to freshwater sediment: Influencing factors and mechanisms

The difference in the transport behaviors of nanoplastics consistently assistant with their toxicities to benthic and other aquatic organisms is still unclear between freshwater and marine sediments. Here, the mobilities of polystyrene nanoplastics (PSNPs) and key environmental factors including salinity and humic acid (HA) were systematically studied. In the sand column experiments, both tested PSNPs in the freshwater system (100 nm NPs (100NPs): 90.15 %; 500 nm NPs (500NPs): 54.22 %) presented much higher penetration ratio than in the marine system (100NPs: 8.09 %; 500NPs: 19.04 %). The addition of marine sediment with a smaller median grain diameter caused a much more apparent decline in NPs mobility (100NPs: from 8.09 % to 1.85 %; 500NPs: from 19.04 % to 3.51 %) than that containing freshwater sediment (100NPs: from 90.15 % to 83.56 %; 500NPs: from 54.22 % to 41.63 %). Interestingly, adding HA obviously led to decreased and slightly increased mobilities for NPs in freshwater systems, but dramatically improved performance for NPs in marine systems. Electrostatic and steric repulsions, corresponding to alteration of zeta potential and hydrodynamic diameter of NPs and sands, as well as minerals owing to adsorption of dissolved organic matter (DOM) and aggregations from varied salinity, are responsible for the mobility difference.

Microplastics in vineyard soils: First insights from plastic-intensive viticulture systems

In the terrestrial environment, microplastics in specialty cropping systems have not been studied so far. Viticulture as a potential plastic-intensive management form and a land use with high erosion risks, plays an important role in transport and distribution of material to other terrestrial and aquatic systems. This paper is a first investigation of microplastics in vineyard soils, assessing the spatial distribution and composition of microplastics in organically and conventionally managed viticulture, and relates it to the macroplastic collected at the vineyards. Topsoils (0-10, 10-30 cm) and plastic particles on soil surfaces from eight vineyard lots were sampled. Four of the vineyards were under organic and four underconventional management and they were all located in the Moselle and Saar Wine Region (Rhineland-Palatinate, Germany). Microplastic analysis was performed via μFTIR chemical imaging after wet-chemical microplastic extraction from soil samples. The mean microplastic concentration was 4200 ± 2800 p kg-1 (mean ± SD), with detected mean sizes of 230 μm ± 300 μm. Most abundant polymers were PP (35.2 %), PA (25.3 %) and PE (15.5 %). The distribution pattern showed higher microplastic concentration in topsoil, at middle and bottom slope position. The smallest particle sizes were found in subsoil samples and bottom position. Thus, erosion is assumed to be a potential downhill transport pathway. According to our dataset, management seems to have no significant influence on microplastic abundance, but affects polymer composition. Polymer composition of micro- and macroplastics partly coincide, thus in-situ fragmentation, is considered the major input source. Based on our findings, we recommend further investigation of plastic pathways in speciality crop systems like viticulture.

Nano- and Microplastics Increase the Occurrence of Bacterial Wilt in Tomato (Solanum lycopersicum L.)

Concern over nano- and microplastic contamination of terrestrial ecosystems has been increasing. However, little is known about the effect of nano- and microplastics on the response of terrestrial ecosystems already under biotic stress. Here, nano- and microplastics at 150-500 mg·kg-1 were exposed to tomatoes (Solanum lycopersicum L.), and the results demonstrate that the presence of nano- and microplastics increased the occurrence of bacterial wilt caused by Ralstonia solanacearum in tomatoes as a function of contaminant concentration, surface modification, and size. Our work shows that nanoplastics (30 nm, 250 mg·kg-1) increased the disease incidence by 2.19-fold. The disease severities in amino- and carboxyl-modified nanoplastic treatments were 30.4 and 21.7% higher than that in unmodified nanoplastic treatment, respectively. The severity of disease under the influence of different-sized nano- and microplastic treatments followed the order 30 > 100 nm > 1 > 50 μm. Mechanistically, nanoplastics disrupted the structure of the tomato rhizosphere soil bacterial community and suppressed the induced systemic resistance in tomato; nanoplastics in planta decreased the salicylic acid and jasmonic acid content in tomatoes, thus inhibiting systemic acquired resistance; and microplastics increased the soil water retention, leading to increased pathogen abundance in the rhizosphere. Additionally, the leachates from nano- and microplastics had no effect on disease occurrence or the growth of tomatoes. Our findings highlight a potential risk of nano- and microplastic contamination to agriculture sustainability and food security.

Attachment of various-shaped polystyrene microplastics to silica surfaces: Experimental validation of the equivalent Cassini oval extended DLVO model

Microplastics (MPs) vary in shape and surface characteristics in the environment. The attachment of MPs to surfaces can be studied using the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. However, this theory does not account for the shape MPs. Therefore, we investigated the attachment of spherical, pear-shaped, and peanut-shaped polystyrene MPs to quartz sand in NaCl and CaCl2 solutions using batch tests. The attachment of MPs to quartz sand was quantified using the attachment efficiency (alpha). Subsequently, alpha behaviors were interpreted using energy barriers (EBs) and interaction minima obtained from extended DLVO calculations, which were performed using an equivalent sphere model (ESM) and a newly developed equivalent Cassini model (ECM) to account for the shape of the MPs. The ESM failed to interpret the alpha behavior of the three MP shapes because it predicted high EBs and shallow minima. The alpha values for spherical MPs (0.62-1.00 in NaCl and 0.48-0.96 in CaCl2) were higher than those for pear- and peanut-shaped MPs (0.01-0.63 in NaCl and 0.02-0.46 in CaCl2, and 0.01-0.59 in NaCl and 0.02-0.40 in CaCl2, respectively). Conversely, the ECM could interpret the alpha behavior of pear- and peanut-shaped MPs either by changes in EBs or interaction minima as a function of orientation angles and electrolyte ionic strength. Therefore, the particle shape must be considered to improve the attachment analyses.

Microplastic generation from field-collected plastic gauze: Unveiling the aging processes

Accumulation of plastic debris in the environment is a matter of global concern. As plastic ages, it generates microplastic (MP) particles with high mobility. Understanding how MPs are generated is crucial to controlling this emerging contaminant. In this study, we utilized high-density polyethylene (HDPE) plastic gauze, collected from urban settings, as a representative example of plastic waste. The plastic gauze was subjected to various aging conditions, including freeze-thaw cycling, mechanical abrasion, and UV irradiation. Following aging, the plastic gauze was rinsed with water, and the number of generated MPs were quantified. It was found that aged plastic gauze generated up to 334 million MP particles per m2 (> 10 µm) during rinsing, a number two orders of magnitude higher than unaged plastic. Fragmentation occurred in two dimensions for bulk MPs of all morphotypes. However, specific aging approaches (i.e., mechanical abrasion and UV irradiation) generated spheres and fibers via pseudo-3D fragmentation. Additionally, changes in molecular weight, size distribution, and surface oxidation characteristics unveiled a complex pattern (i.e., irregular changes with exposure time). This complexity underscores the intricate nature of plastic debris aging processes in the environment.

Statuses, shortcomings, and outlooks in studying the fate of nanoplastics and engineered nanoparticles in porous media respectively and borrowable sections from engineered nanoparticles for nanoplastics

This review discussed the research statuses, shortcomings, and outlooks for the fate of nanoplastics (NPs) and engineered nanoparticles (ENPs) in porous media and borrowable sections from ENPs for NPs. Firstly, the most important section was that we reviewed the research statuses on the fate of NPs in porous media and the main influencing factors, and explained the influencing mechanisms. Secondly, in order to give NPs a reference of research ideas and influence mechanisms, we also reviewed the research statuses on the fate of ENPs in porous media and the factors and mechanisms influencing the fate. The main mechanisms affecting the transport of ENPs were summarized (Retention or transport modes: advection, diffusion, dispersion, deposition, adsorption, blocking, ripening, and straining; Main forces and actions: Brownian motion, gravity, electrostatic forces, van der Waals forces, hydration, filtration, bridging; Affecting elements of the forces and actions: the ENP and media grain surface functional groups, size, shape, zeta potential, density, hydrophobicity, and roughness). Instead of using the findings of ENPs, thorough study on NPs was required because NPs and ENPs differed greatly. Based on the limited existing studies on the NP transport in porous media, we found that although the conclusions of ENPs could not be applied to NPs, most of the influencing mechanisms summarized from ENPs were applicable to NPs. Combining the research thoughts of ENPs, the research statuses of NPs, and some of our experiences and reflections, we reviewed the shortcomings of the current studies on the NP fate in porous media as well as the outlooks of future research. This review is very meaningful for clarifying the research statuses and influence mechanisms for the NP fate in porous media, as well as providing a great deal of inspiration for future research directions about the NP fate in porous media.

Mechanisms of increased small nanoplastic particle retention in water-saturated sand media with montmorillonite and diatomite: Particle sizes, water components, and modelling

The processes by which small nanoplastics (NPs) accumulate in soil are unclear. To clarify the different deposition processes that affect small NPs (< 30 nm) compared to larger NPs in the soil environment, due to their interaction with clays as major soil components, the transport behavior of two-sized NPs (20 and 80 nm) with two clays (diatomite (Diat) and montmorillonite (Mont)) in NaCl and CaCl2 solutions were investigated in water-saturated quartz sand columns. The experimental results showed that more 20 nm NPs could enter the lattice structure of Diat than Mont in NaCl solution. This contributed to the stronger deposition of 20 nm NPs by Diat on sand, which was associated with a lower k1d/k1 value (obtained from two-site kinetic attachment model). In contrast, 80 nm NPs had a stronger reversible retention than 20 nm NPs with Mont, even though both sizes of NPs-Mont displayed a similar transportability. In CaCl2 solution, the larger NPs-Mont hetero-aggregates formed with a stronger suppressed depth of φmax based on Derjaguin-Landau-Verwey-Overbeek theory. Thus, Mont had a stronger transport inhibition than Diat for both NPs sizes, with a lower k1d/k1. These findings could benefit in predicting the size-based deposition of NPs in a heterogenous soil environment.

Optimization of microplastic removal based on the complementarity of constructed wetland and microalgal-based system

As one of the emblematic emerging contaminants, microplastics (MPs) have aroused great public concern. Nevertheless, the global community still insufficiently acknowledges the ecological health risks and resolution strategies of MP pollution. As the nature-based biotechnologies, the constructed wetland (CW) and microalgal-based system (MBS) have been applied in exploring the removal of MPs recently. This review separately presents the removal research (mechanism, interactions, implications, and technical defects) of MPs by a single method of CWs or MBS. But one thing with certitude is that the exclusive usage of these techniques to combat MPs has non-negligible and formidable challenges. The negative impacts of MP accumulation on CWs involve toxicity to macrophytes, substrates blocking, and nitrogen-removing performance inhibition. While MPs restrict MBS practical application by making troubles for separation difficulties of microalgal-based aggregations from effluent. Hence the combined strategy of microalgal-assisted CWs is proposed based on the complementarity of biotechnologies, in an attempt to expand the removing size range of MPs, create more biodegradable conditions and improve the effluent quality. Our work evaluates and forecasts the potential of integrating combination for strengthening micro-polluted wastewater treatment, completing the synergistic removal of MP-based co-pollutants and achieving long-term stability and sustainability, which is expected to provide new insights into MP pollution regulation and control.

Underappreciated microplastic galaxy biases the filter-based quantification

Long-term environmental loading of microplastics (MPs) causes alarming exposure risks for a variety of species worldwide, considered a planetary threat to the well-being of ecosystems. Robust quantitative estimates of MP extents and featured diversity are the basis for comprehending their environmental implications precisely, and of these methods, membrane-based characterizations predominate with respect to MP inspections. However, though crucial to filter-based MP quantification, aggregation statuses of retained MPs on these substrates remain poorly understood, leaving us a "blind box" that exaggerates uncertainty in quantitive strategies of preselected areas without knowing overview loading structure. To clarify this uncertainty and estimate their impacts on MP counting, using MP imaging data assembled from peer-reviewed studies through a systematic review, here we analyze the particle-specific profiles of MPs retained on various substrates according to their centre of mass with a fast-random forests algorithm. We visualize the formation of distinct galaxy-like MP aggregation-similar to the solar system and Milky Way System comprised of countless stars-across the pristine and environmental samples by leveraging two spatial parameters developed in this study. This unique pattern greatly challenges the homogeneously or randomly distributed MP presumption adopted extensively for simplified membrane-based quantification purposes and selective ROI (region of interest) estimates for smaller-sized plastics down to the nano-range, as well as the compatibility theory using pristine MPs as the standard to quantify the presence of environmental MPs. Furthermore, our evaluation with exemplified numeration cases confirms these location-specific and area-dependent biases in many imaging analyses of a selective filter area, ascribed to the minimum possibility of reaching an ideal turnover point for the selective quantitive strategies. Consequently, disproportionate MP schemes on loading substrates yield great uncertainty in their quantification processing, highlighting the prompt need to include pattern-resolved calibration prior to quantification. Our findings substantially advance our understanding of the structure, behavior, and formation of these MP aggregating statuses on filtering substrates, addressing a fundamental question puzzling scientists as to why reproducible MP quantification is barely achievable even for subsamples. This study inspires the following studies to reconsider the impacts of aggregating patterns on the effective counting protocols and target-specific removal of retained MP aggregates through membrane separation techniques.

Labelling of micro- and nanoplastics for environmental studies: state-of-the-art and future challenges

Studying microplastics and nanoplastics (MNP) in environmental matrices is extremely challenging, and recent developments in labelling techniques may hold much promise to further our knowledge in this field. Here, we reviewed MNP labelling techniques and applications to provide the first systematic and in-depth insight into MNP labelling. We classified all labelling techniques for MNP into four main types (fluorescent, metal, stable isotope and radioisotope) and discussed per type the synthesis methods, detection methods, influencing factors, and the current and future applications and challenges. Direct labelling of environmental MNP with fluorescent dyes and metals enables simple visualisation and selective detection of MNP to improve detection efficiency. However, it is still an open question how to avoid co-labelling of non-plastic (i.e. non-target, matrix) materials. Labelling of MNP that are intentionally added in the environment may allow semi-automatic detection of MNP particles with high accuracy and sensitivity during studies on e.g. transport and degradation. The detection limit of labelled MNP largely depends on particle size and the type of matrix. Fluorescent labelling allows efficient detection of microplastics, whereas metal labelling is preferred for nanoplastics research due to a potentially higher sensitivity. A major challenge for fluorescent and metal labelling is to develop techniques that do not alter the inherent MNP properties or only do so minimally, in particular the surface properties. Stable and radioactive isotope labelling (13C and 14C, but also 15N, 2H) of the polymer itself allows to preserve inherent MNP properties, but have been largely ignored. Overall, labelling of MNP holds great promise for advancing our fundamental understanding of the behaviour of plastics, notably the smallest fractions, in the environment.

Vertical distribution and weathering characteristic of microplastics in soil profile of different land use types

After deposition on the topsoil, microplastics (MPs) may be vertically migrated to deeper soil layers over time or eventually enter the groundwater system, leading to more widespread environmental and ecological issues. However, the vertical distribution of MPs in natural soils are not yet fully understood. In this study, we collected soil profiles (0-100 cm) from four different land use types on the west bank of Taihu Lake in China to investigate the vertical distribution and weathering characteristics of MPs. The average abundance of soil MPs followed the pattern of paddy field (490 ± 82 items/kg) > dryland (356 ± 55 items/kg) > tea garden (306 ± 32 items/kg) > woodland (171 ± 27 items/kg) in the 0-10 cm layer, and the abundance of MPs decreased linearly with soil depth (r = -0.89, p < 0.01). Compared to tea garden and woodland, MPs in dryland and paddy field have migrated to deeper soil layers (80-100 cm). The carbonyl index of polyethylene and polypropylene MPs increased significantly with soil depth (r = 0.96, p < 0.01), with values of 0.58 ± 0.30 and 0.54 ± 0.33, respectively. The significant negative correlation between MPs size and carbonyl index confirmed that small-sized MPs in deeper soil layers originated from the weathering and fragmentation of MPs in topsoil. The results of structural equation model showed that roots and soil aggregates may act as filters during the vertical migration of MPs. These findings contribute to a better understanding of the environmental fate of MPs in soil and the assessment of associated ecological risks.

Distinct microplastics abundance variation in root-associated sediments revealed the underestimation of mangrove microplastics pollution

Mangrove sediment is acknowledged as the critical sink of microplastics (MPs). However, the potential effect of mangrove root systems on the MPs migration in sediment remains largely unknown. Here, our study characterized the spatial distribution of MPs trapped in root hair, rhizosphere, and non-rhizosphere zones, and analyzed their correlations with physicochemical properties of sediments. The significantly increased MPs abundances toward root systems shed light on the distinct effect on the migration of MPs exerted by mangrove root systems. Partial least squares path modeling (PLS-PM) analysis revealed that pore water content and pH influenced the abundances of different MP characteristics (shape, color, size, and type) and further promoted the accumulation of MPs toward the root systems. In different mangrove areas from landward to seaward, other sediment properties (median grain size, clay content, and salinity) also controlled MP distribution. Additionally, smaller-sized MPs (<1000 μm) were more easily transported to the root systems. Our study emphasizes the importance of considering root systems effect when investigating the mechanisms of MPs distribution and migration in mangrove sediments.

Accumulation and migration of microplastics and its influencing factors in coastal saline-alkali soils amended with sewage sludge

Coastal saline-alkali soil can be transformed to agricultural soil with sewage sludge amendment. However, sewage sludge contains a large number of microplastics (MPs), and the fate of MPs in sludge-treated saline-alkali soil needs to be studied. Therefore, we investigated the accumulation and migration of MPs, and their influencing factors in saline-alkali soil after one-time sewage sludge application (0, 25, 50, 100 and 200 t ha-1 SSA). The results indicated that sewage sludge input contributed to MP accumulation in soil, and the MP abundance in 20-40 cm soil was significantly lower than that in 0-20 cm soil. Fragments and fibers were the most abundant MPs in soil, and the proportions of fragments and 50-200 µm MPs in 20-40 cm soil were lower than those in 0-20 cm soil, while the < 50 µm MP proportion was higher than that in 0-20 cm soil. Correlation analysis showed that MP accumulation rate (0-40 cm) and migration rate (20-40 cm) were negatively correlated with soil organic matter (SOM) content and SSA, but positively correlated with soil pH. Stepwise regression analysis further showed that SOM and SSA were the main factors affecting MP accumulation rate, which explained 47.7% and 46% of its variation, respectively, while pH was the crucial factor affecting the migration rate of MPs, followed by EC and SSA. In conclusion, SSA caused MP accumulation in saline-alkali soil, and SSA primarily affected the MP abundance, while soil OM, pH and EC directly affected MP migration in soil.

Identification of the driving factors of microplastic load and morphology in estuaries for improving monitoring and management strategies: A global meta-analysis

Estuaries are one of the primary pathways for transferring microplastics (MPs) from the land to the ocean. A comprehensive understanding of the load, morphological characteristics, driving factors, and potential risks of MPs in estuaries is imperative to inform reliable management in this critical transboundary area. Extracted from 135 publications, a global meta-analysis comprising 1477 observations and 124 estuaries was conducted. MP abundance in estuaries was tremendously variable, reaching a mean of 21,342.43 ± 122,557.53 items/m3 in water and 1312.79 ± 6295.73 items/kg in sediment. Fibers and fragments take up a majority proportion in estuaries. Polyester, polypropylene, and polyethylene are the most detected MP types. Around 68.73% and 85.51% of MPs detected in water and sediment are smaller than 1 μm. The redundancy analysis revealed that the explanatory factors influencing the morphological characteristics of MPs differed between water and sediment. Regression analysis shows that MP abundance in water is significantly inversely correlated with mesh/filter size, per capita plastic waste, and the Human Development Index, whereas it is significantly positively correlated with population density and share of global mismanaged plastic waste. MP abundance in sediment significantly positively correlated with aridity index and probability of plastic entering the ocean, while significantly negatively correlated with mesh/filter size. Analysis based on Geodector identified that the extraction method, density of flotation fluid, and sampling depth are the top three explanatory factors for MP abundance in water, while the share of global mismanaged plastic waste, the probability of plastic being emitted into the ocean, and population density are the top three explanatory factors for MP abundance in sediment. In the studied estuaries, 46.75% of the water and 2.74% of the sediment are categorized into extremely high levels of pollution, while 73.08% of the water and 43.48% of the sediment belong to class V of the potential ecological index.

Patterns and variability in the microplastic contamination along the southwest coast of India with emphasis on submarine groundwater discharge sites

Beach sediments of the southwest coast of India were analysed to estimate the microplastic contamination with emphasis on the submarine groundwater discharge (SGD) zones. Both SGD and non-SGD sites were assessed for abundance, morphotype and polymer type of microplastics. Microplastic load was 230.429 ± 62.87 particles per 100 g. Fibre, mainly blue, was the abundant morphotype, followed by fragment, foam and film. The polymer types were POLYETHYLENE (PE) (30.77 %), POLYPROPYLENE (PP) (26.92 %), POLYAMIDE (PA) (19.23 %), POLYSTYRENE (PS) (11.54 %), ETHYLENE VINYL ACETATE (EVA) (7.692 %) and POLYVINYL CHLORIDE (PVC) (3.846 %). The SGD zones exhibited higher microplastic contamination with statistically significant variations from non SGD sites. The study accounts the levels of microplastic contamination along the southwest coast of India, a major fishery zone. The higher abundance of microplastic in the SGD zones indicates the significance of subterranean groundwater through flow as a pathway of anthropogenic contaminants towards marine ecosystems.

Path toward Sustainability in Wastewater Management in Brazil

Developing countries have not carried out the adequate management of wastewater and are a long way off meeting the sustainability goal of universal access to safely managed sanitation services by 2030. This article discusses sustainability in wastewater management and conducts a narrative literature review to analyze four stages on the path toward sustainability: (1) the prevention of or reduction in pollution at the source; (2) wastewater collection and treatment; (3) using wastewater as an alternative source of water; and (4) the recovery of useful by-products. It also provides an overview of wastewater management in Brazil and shows the advantages of using wastewater to produce biofuel in a country in which 48.3% of energy production comes from renewable sources.

Transport of micron-sized polyethylene particles in confined aquifer: Effects of size, aging, and confining pressure

Contamination of groundwater by microplastics (MPs) is increasingly reported and attracts a growing attention due to their potential risks. To understand how MPs migrate into groundwater, many previous works have investigated their transport using man-made microspheres of few microns or smaller as models. However, MPs observed in the environment are more diverse in size, shape, and type, which may have different migration behaviors. In this work, the transports of irregularly shaped polyethylene (PE) particles in the sand packed column were studied. Small MPs (22-37 μm) generally have high mobility than large MPs (44-74 μm) but can also be affected by aging. Aging decreased the hydrophobicity of the MPs and increased their surface negative charge, which can facilitate the transport of MPs. However, the physical barrier of space in the porous media might have a greater influence on their transport. The retention of the MPs was enhanced with the increase of pressure due to compression that decreased pore size. Results from this study showed that MPs of environmental features can also be transported in the groundwater but the processes could be governed by different factors, such as physical interception and steric hindrance.

Exploring the vertical transport of microplastics in subsurface environments: Lab-scale experiments and field evidence

Microplastics (MPs) defined as smaller 5 mm plastic particles have received increasing attention due to their global occurrence and potential toxicity. This study investigated the effects of environmental factors (rainfall intensity, 13 and 29 mm/h) and MP characteristics (morphology (fiber, flake, and film), polymer type (polypropylene (PP), polyethylene terephthalate (PET), and polystyrene (PS)) and size (100-300, 300-500, and 500-1000 μm)) on the vertical transport of MP in unsaturated soil conditions using lab-scale column experiments. Additionally, the occurrence and characteristics of MP detected in soil/sediment (total 13 samples) and groundwater samples (total 6 samples) were explored in the field study. Laboratory-scale column experiments revealed that heavy rainfall intensity (29 mm/h) increased the degree of MP vertical transport in unsaturated soil conditions and MP fibers showed the greatest vertical mobility among the various morphologies of MPs assessed. For the polymer type and size, the lighter PP polymer or the larger size of MP (500-1000 μm) showed higher mobility. In the field study, a statistical difference in MP abundance was observed depending on the population density and degree of urban development in both soil and groundwater samples. Comparing to the two different types of environmental media samples obtained from the same site, there was a significant difference in the composition of polymer types present while statistically no difference in MP abundance was observed between the two media samples (i.e., soil or sediment and groundwater). In addition, MP fibers and polyethylene (PE) were predominantly detected in our two study areas. These results suggest that various types of MP can pass through the unsaturated zone by water infiltration, even if it takes a long time to reach groundwater. Overall, we found that the degree of vertical transport of the MPs was highly sensitive to environmental conditions and MP characteristics.

Influence of microplastics on the transport of antibiotics in sand filtration investigated by AFM force spectroscopy

Microplastics and antibiotics were frequently detected in the effluent of sand filtration, while the presence of microplastics may change the interactions between the antibiotics and the quartz sands. However, the influence of microplastics on the transport of antibiotics in sand filtration has not been revealed. In this study, ciprofloxacin (CIP) and sulfamethoxazole (SMX) were respectively grafted on AFM probes to determine the adhesion forces to the representative microplastics (PS and PE) and the quartz sand. CIP and SMX exhibited low and high mobilities in the quartz sands, respectively. Compositional analysis of the adhesion forces indicated that the lower mobility of CIP in sand filtration columns could be attributed to the electrostatic attraction between the quartz sand and CIP compared with repulsion for SMX. Moreover, the significant hydrophobic interaction between the microplastics and the antibiotics could be responsible for the competitive adsorption of the antibiotics to the microplastics from the quartz sands; meanwhile, the π-π interaction further enhanced the adsorption of PS to the antibiotics. As a result of the high mobility of microplastics in the quartz sands, the carrying effect of microplastics enhanced the transport of antibiotics in the sand filtration columns regardless of their original mobilities. This study provided insights into the mechanism of the microplastics on enhancing the transport of antibiotics in sand filtration systems from the perspective of the molecular interaction.

Plastic-Rock Complexes as Hotspots for Microplastic Generation

Discarded plastics and microplastics (MPs) in the environment are considered emerging contaminants and indicators of the Anthropocene epoch. This study reports the discovery of a new type of plastic material in the environment─plastic-rock complexes─formed when plastic debris irreversibly sorbs onto the parent rock after historical flooding events. These complexes consist of low-density polyethylene (LDPE) or polypropylene (PP) films stuck onto quartz-dominated mineral matrices. These plastic-rock complexes serve as hotspots for MP generation, as evidenced by laboratory wet-dry cycling tests. Over 1.03 × 10⁸ and 1.28 × 10⁸ items·m^-2 MPs were generated in a zero-order mode from the LDPE- and PP-rock complexes, respectively, following 10 wet-dry cycles. The speed of MP generation was 4-5 orders of magnitude higher than that in landfills, 2-3 orders of magnitude higher than that in seawater, and >1 order of magnitude higher than that in marine sediment as compared with previously reported data. Results from this investigation provide strong direct evidence of anthropogenic waste entering geological cycles and inducing potential ecological risks that may be exacerbated by climate change conditions such as flooding events. Future research should evaluate this phenomenon regarding ecosystem fluxes, fate, and transport and impacts of plastic pollution.

Exploring the presence and distribution of microplastics in subterranean estuaries from southwest India

Rivers, surface runoff, and the wind all transport microplastics (MPs) to the ocean. There is a knowledge gap concerning the distribution of microplastics in transitional subterranean estuaries. Here, we report the presence of microplastics in the pore water, groundwater, and sea water from four locations in southwest India. Pore water, groundwater, and seawater had mean MP abundances (± standard deviations) of 0.75 (±0.66), 0.15 (±0.1), and 0.11 (±0.07) MPs/l, respectively. Fibres were the dominant category of MPs found. Fourier-transformed infrared spectroscopy revealed the presence of polymers like polyester, low-density polyethylene, and polystyrene. Possible sources of microplastic are fishing activities, tourism, and coastal residents. The microplastics-derived risk assessment scores indicate severe risk to the ecosystems. Fibrous microplastics in pore water indicate that these linear particles can migrate vertically through sandy sediments, reaching subterranean estuaries. We believe submarine groundwater discharge can act as a possible pathway for microplastics to enter the oceans.

Land use-based characterization and source apportionment of microplastics in urban storm runoffs in a tropical region

Urban stormwater runoff has been suggested as one important land-based pathway of microplastics (MPs) entering the oceans, in which the abundance and characteristics of MPs may be influenced by urban land use types. However, little information has been reported regarding this, especially in the tropical monsoon region. This study first reports the MPs in urban stormwater runoffs in a tropical monsoon region that were collected from four typical urban land use types, including industrial, highways, commercial, and residential areas. The average MP particle count and mass concentration were measured as 4.7 ± 3.5 particles/L and 3.8 ± 2.9 mg/L, respectively. MP abundances showed clear urban land use gradients following the order of industrial > transportation > commercial > residential area. In terms of the seasonal variation in MP abundances, a slightly increasing particle count in the dry season was noted for the residential site. Source apportionment of MPs in stormwater runoffs was demonstrated based on the land use type, particle morphology, and chemical compositions. With the simple apportionment approach, approximately 85% of the MP sources were able to be identified in the industrial, transportation, and residential sites. However, the commercial site showed high variability in terms of the morphology and polymer type of MPs. Furthermore, significantly positive correlations between MP abundance and runoff turbidity, TSS, COD, and rainfall intensity were identified, while, no significant correlation was found between MP characteristics and selected water quality/meteorological parameters.

Preliminary investigation on effects of size, polymer type, and surface behaviour on the vertical mobility of microplastics in a porous media

Due to the ubiquitous nature of microplastic (MP), knowledge of its fate and migration in subsurface environments like soil becomes extremely important to understand underlying ecological risk. The fate and migration of MP in subterranean settings like sand are governed by the retention/transport properties influenced by the interaction of sand and MPs. In this study, sand column experiments under simulated rainfall conditions were conducted for 180 days to assess the vertical migration of mixed MPs consisting of polypropylene (PP), polyethylene (PE), and polyethylene terephthalate (PET). Sand column experiments were subjected to 60 wet-dry cycles over 180 days. The effects of polymer type, microplastic size, sand particle size, and surface roughness on the migration of MPs were evaluated. Results showed that the smallest-sized fragmented PE particles had the highest migration potential compared to PET and PE. The ratios of the diameters of MP particles and sand particles (d_MP/d_sand) played a significant role in determining the penetration depth of the various sizes of MPs. The MP particles with d_MP/d_sand 0.11 showed greater penetration depth in sand media and were detected in the column effluent water after 60 days of a column run. In addition, surface roughness, low ionic strength water, irregularly shaped particles, and wet and dry cycles contributed to the migration of MPs in the sand column. Three new absorbance peaks corresponding to the hydroxyl, CO stretch, and carbonyl groups evolved in the extracted PE MPs sample from different depths, as shown by FTIR analysis, suggesting that PE MPs had been oxidised. XPS analysis revealed changes in the surface properties of the MPs, indicating that oxidation occurred at the top layer, causing structural deterioration of the PE MPs. However, oxidation of the surface bonds was restricted in the layers underneath due to a lack of oxygen. The finding of the study suggests that in a natural environment, such accumulation and migration of MPs in sandy soil can increase the possibilities to the underlying groundwater contamination.

Tracking nanoplastics in freshwater microcosms and their impacts to aquatic organisms

In this work, we used palladium-doped polystyrene NPLs (PS-NPLs with a primary size of 286 ± 4 nm) with an irregular surface morphology which allowed for particle tracking and evaluation of their toxicity on two primary producers (cyanobacterium, Anabaena sp. PCC7120 and green algae, Chlamydomonas reinhardtii) and one primary consumer (crustacean, Daphnia magna). the concentration range for Anabaena and C. reinhardtii was from 0.01 to 1000 mg/L and for D. magna, the range was from 7.5 to 120 mg/L.EC_50 s ranged from 49 mg NPLs/L for D. magna (48hEC_50 s) to 248 mg NPLs/L (72hEC_50 s for C. reinhardtii). PS-NPLs induced dose-dependent reactive oxygen species overproduction, membrane damage and metabolic alterations. To shed light on the environmental fate of PS-NPLs, the short-term distribution of PS-NPLs under static (using lake water and sediments) and stirring (using river water and sediments) conditions was studied at laboratory scale. The results showed that most NPLs remained in the water column over the course of 48 h. The maximum percentage of settled particles (∼ 30 %) was found under stirring conditions in comparison with the ∼ 10 % observed under static ones. Natural organic matter increased the stability of the NPLs under colloidal state while organisms favored their settlement. This study expands the current knowledge of the biological effects and fate of NPLs in freshwater environments.

Prediction of attachment efficiency using machine learning on a comprehensive database and its validation

Colloidal particles can attach to surfaces during transport, but the attachment depends on particle size, hydrodynamics, solid and water chemistry, and particulate matter. The attachment is quantified in filtration theory by measuring attachment or sticking efficiency (Alpha). A comprehensive Alpha database (2538 records) was built from experiments in the literature and used to develop a machine learning (ML) model to predict Alpha. The training (r-squared: 0.86) was performed using two random forests capable of handling missing data. A holdout dataset was used to validate the training (r-squared: 0.98), and the variable importance was explored for training and validation. Finally, an additional validation dataset was built from quartz crystal microbalance experiments using surface-modified polystyrene, poly (methyl methacrylate), and polyethylene. The experiments were performed in the absence or presence of humic acid. Full database regression (r-squared: 0.90) predicted Alpha for the additional validation with an r-squared of 0.23. Nevertheless, when the original database and the additional validation dataset were combined into a new database, both the training (r-squared: 0.95) and validation (r-squared: 0.70) increased. The developed ML model provides a data-driven prediction of Alpha over a big database and evaluates the significance of 22 input variables.

Microplastic Textile Fibers Accumulate in Sand and Are Potential Sources of Micro(nano)plastic Pollution

Agricultural soils have been identified as sinks for microplastic fibers; however, little information is available on their long-term fate in these soils. In this study, polyester and nylon fibers were precisely cut to relevant environmental lengths, using novel methodology, and their behavior in sand columns was studied at environmental concentration. The longer fibers (>50 μm) accumulated in the upper layers of the sand, smaller fibers were slightly more mobile, and nylon showed marginally higher mobility than polyester. Previous studies have overlooked changes in microplastic morphology due to transport in soil. Our study is the first to show that fibers exhibited breakage, peeling, and thinning under flow conditions in soil, releasing smaller, more mobile fragments. Furthermore, the peelings exhibited different adsorption properties compared to the core fiber. This suggests that microplastic fibers can become a source of smaller micro(nano)plastics and potential vectors for certain molecules, risking continuous contamination of nearby soils, surfaces, and groundwater.

Short Depuration of Oysters Intended for Human Consumption Is Effective at Reducing Exposure to Nanoplastics

Nanoplastics (NPs; <1 μm) have greater availability to marine organisms than microplastics (1-5000 μm). Understanding NP uptake and depuration in marine organisms intended for human consumption is imperative for food safety, but until now it has been limited due to analytical constraints. Oysters (Crassostrea gigas) were exposed to polystyrene NPs doped with palladium (Pd), allowing the measurements of their uptake into tissues by inductively coupled plasma mass spectrometry (ICP-MS) combined with electron microscopy. Oysters were exposed for 6 days (d) to "Smooth" or "Raspberry" NPs, followed by 30 d of depuration with the aim of assessing the NP concentration in C. gigas following exposure, inferring the accumulation and elimination rates, and understanding the clearance of Pd NPs during the depuration period. After 6 d, the most significant accumulation was found in the digestive gland (106.6 and 135.3 μg g^-1 dw, for Smooth and Raspberry NPs, respectively) and showed the most evident depuration (elimination rate constant K_Smooth = 2 d^-1 and K_Raspberry = 0.2 d^-1). Almost complete depuration of the Raspberry NPs occurred after 30 d. While a post-harvesting depuration period of 24-48 h for oysters could potentially reduce the NP content by 75%, more research to validate these findings, including depuration studies of oysters from the field, is required to inform practices to reduce human exposure through consumption.

Polystyrene microplastics and nanoplastics distinctively affect anaerobic sludge treatment for hydrogen and methane production

Microplastics and nanoplastics generally accumulated in waste activated sludge (WAS) after biological wastewater treatment. Currently, researches mainly focused on how plastics affected a particular sludge treatment method, without the comparison of different sludge systems. Herein, distinct responses of hydrogen-producing and methane-producing sludge systems were comprehensively evaluated with polystyrene microplastics (PS-MPs) and nanoplastics (PS-NPs) existence. Experimental results showed that PS particles would stimulate inhibition on anaerobic gas production except that PS-MPs were conducive to hydrogen accumulation, which was caused by the enhanced solubilization. Mechanistic investigation demonstrated that severe inhibition of PS-NPs to hydrogen production was derived from the excessively inhibitory hydrolysis despite of improving solubilization. Varying degrees of inhibition to acidification and methanation collectively contributed to reduced methane accumulation with exposure to PS-MPs and PS-NPs. Excessive oxidative stress would be generated in the presence of PS-MPs or PS-NPs, deteriorating microbial activities and richness of species responsible for hydrogen or methane production.

Role of metal-nanoparticles in farming practices: an insight

Nanotechnology introduces revolutionary approaches for agriculture in the form of nano-based pesticides, fertilizers, sensors, weed-controlling agents, enhanced seed germination materials, etc. Even though metal-nanoparticles (NPs) have shown their potential to improve crop yield, the mode of action at the cellular level and fate in the human body and the environment are not well understood yet. Several metal-nanoparticles have been studied extensively by researchers for their active role in enhancing the rate of seed germination and crop quality augmentation which may happen due to several mechanisms such as increased porosity in nano-primed seeds inducing up-regulation of the expression of aquaporin and Reactive Oxygen Species (ROS) genes involved in water uptake, improving the root dehydrogenase activity to enhance the water absorption capability, etc. However, researchers have also demonstrated and reported the possible toxicity of NPs in the environment due to their agricultural practices. But the fate of NPs and their environmental impact are still unclear and largely vary based on several factors such as the size of NPs, coating material, mode of discharge and locations, etc. This review thoroughly focuses on the mode of action of various NPs in seed germination and accumulation, translocation through cells, and potential environmental and health risks.

Effects of Different Concentrations of Oil Mist Particulate Matter on Pulmonary Fibrosis In Vivo and In Vitro

Oil-mist particulate matter (OMPM) refers to oily particles with a small aerodynamic equivalent diameter in ambient air. Since the pathogenesis of pulmonary fibrosis (PF) has not been fully elucidated, this study aims to explore the potential molecular mechanisms of the adverse effects of exposure to OMPM at different concentrations in vivo and in vitro on PF. In this study, rats and cell lines were treated with different concentrations of OMPM in vivo and in vitro. Sirius Red staining analysis shows that OMPM exposure could cause pulmonary lesions and fibrosis symptoms. The expression of TGF-β1, α-SMA, and collagen I was increased in the lung tissue of rats. The activities of MMP2 and TIMP1 were unbalanced, and increased N-Cadherin and decreased E-Cadherin upon OMPM exposure in a dose-dependent manner. In addition, OMPM exposure could activate the TGF-β1/Smad3 and TGF-β1/MAPK p38 signaling pathways, and the differentiation of human lung fibroblast HFL-1 cells. Therefore, OMPM exposure could induce PF by targeting the lung epithelium and fibroblasts, and activating the TGF-β1/Smad3 and TGF-β1/MAPK p38 signaling pathways.

The impacts of nanoplastic toxicity on the accumulation, hormonal regulation and tolerance mechanisms in a potential hyperaccumulator - Lemna minor L

Plastic pollution, which is currently one of the most striking problems of our time, raises concerns about the dispersal of micro and nano-sized plastic particles in ecosystems and their toxic effects on living organisms. This study was designed to reveal the toxic effects of polystyrene nanoplastic (PS NP) exposure on the freshwater macrophyte Lemna minor. In addition, elucidating the interaction of this aquatic plant, which is used extensively in the phytoremediation of water contaminants and wastewater treatment facilities, with nanoplastics will guide the development of remediation techniques. For this purpose, we examined nanoplastic accumulation, oxidative stress markers, photosynthetic efficiency, antioxidant system activity and phytohormonal changes in L. minor leaves subjected to PS NP stress (P-1, 100 mg L^-1; P-2, 200 mg L^-1 PS NP). Our results showed no evidence of PS NP-induced oxidative damage in P-1 group plants, although PS NP accumulation reached 56 µg g^-1 in the leaves. Also, no significant changes in chlorophyll a fluorescence parameters were observed in this group, indicating unaffected photosynthetic efficiency. PS NP exposure triggered the antioxidant system in L. minor plants and resulted in a 3- and 4.6-fold increase in superoxide dismutase (SOD) activity in the P-1 and P-2 groups. On the other hand, high-dose PS NP treatment resulted in insufficient antioxidant activity in the P-2 group and increased hydrogen peroxide (H₂O₂) and lipid peroxidation (TBARS contents) by 25 % and 17 % compared to the control plants. Furthermore, PS NP exposure triggered abscisic acid biosynthesis (two-fold in the P-1 and three-fold in the P-2 group), which is also involved in regulating the stress response. In conclusion, L. minor plants tolerated NP accumulation without growth suppression, oxidative stress damage and limitations in photosynthetic capacity and have the potential to be used in remediation studies of NP-contaminated waters.