1
|
Zhang YS, Wang T, Bao ZL, Qian PF, Liu XC, Geng WH, Zhang D, Wang SW, Zhu Q, Geng HZ. MXene and AgNW based flexible transparent conductive films with sandwich structure for high-performance EMI shielding and electrical heaters. J Colloid Interface Sci 2024; 665:376-388. [PMID: 38537586 DOI: 10.1016/j.jcis.2024.03.120] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/26/2024] [Revised: 03/06/2024] [Accepted: 03/18/2024] [Indexed: 04/17/2024]
Abstract
With the popularization of 5G technology and the development of science and technology, flexible and transparent conductive films (TCF) are increasingly used in the preparation of optoelectronic devices such as electromagnetic shielding devices, transparent flexible heaters, and solar cells. Silver nanowires (AgNW) are considered the best material for replacing indium tin oxide to prepare TCFs due to their excellent comprehensive properties. However, the loose overlap between AgNWs is a significant reason for the high resistance. This article investigates a sandwich structured conductive network composed of AgNW and Ti3C2Tx MXene for high-performance EMI shielding and transparent electrical heaters. Polyethylene pyrrolidone (PVP) solution was used to hydrophilic modify PET substrate, and then MXene, AgNW, and MXene were assembled layer by layer using spin coating method to form a TCF with a sandwich structure. One-dimensional AgNW is used to provide electron transfer channels and improve light penetration, while two-dimensional MXene nanosheets are used for welding AgNWs and adding additional conductive channels. The flexible TCF has excellent transmittance (85.1 % at 550 nm) and EMI shielding efficiency (27.1 dB). At the voltage of 5 V, the TCF used as a heater can reach 85.6 °C. This work offers an innovative approach to creating TCFs for the future generation.
Collapse
Affiliation(s)
- Yi-Song Zhang
- Tianjin Key Laboratory of Advanced Fibers and Energy Storage, School of Material Science and Engineering, Tiangong University, Tianjin 300387, China
| | - Tao Wang
- Faculty of Engineering, China University of Petroleum-Beijing at Karamay, Karamay 834000, China
| | - Ze-Long Bao
- Tianjin Key Laboratory of Advanced Fibers and Energy Storage, School of Material Science and Engineering, Tiangong University, Tianjin 300387, China
| | - Peng-Fei Qian
- Tianjin Key Laboratory of Advanced Fibers and Energy Storage, School of Material Science and Engineering, Tiangong University, Tianjin 300387, China
| | - Xuan-Chen Liu
- Tianjin Key Laboratory of Advanced Fibers and Energy Storage, School of Material Science and Engineering, Tiangong University, Tianjin 300387, China
| | - Wen-Hao Geng
- Tianji Zhencai Technology (Hebei) Co., Ltd., Cangzhou 061000, China
| | - Di Zhang
- Tianji Zhencai Technology (Hebei) Co., Ltd., Cangzhou 061000, China; Cangzhou Institute of Tiangong University, Cangzhou 061000, China
| | - Shi-Wei Wang
- Tianjin Key Laboratory of Advanced Fibers and Energy Storage, School of Material Science and Engineering, Tiangong University, Tianjin 300387, China
| | - Qingxia Zhu
- Tianjin Key Laboratory of Advanced Fibers and Energy Storage, School of Material Science and Engineering, Tiangong University, Tianjin 300387, China; Tianji Zhencai Technology (Hebei) Co., Ltd., Cangzhou 061000, China.
| | - Hong-Zhang Geng
- Tianjin Key Laboratory of Advanced Fibers and Energy Storage, School of Material Science and Engineering, Tiangong University, Tianjin 300387, China; Tianji Zhencai Technology (Hebei) Co., Ltd., Cangzhou 061000, China; Cangzhou Institute of Tiangong University, Cangzhou 061000, China.
| |
Collapse
|
2
|
Xu Y, Ye Z, Zhao G, Fei Q, Chen Z, Li J, Yang M, Ren Y, Berigan B, Ling Y, Qian X, Shi L, Ozden I, Xie J, Gao W, Chen PY, Yan Z. Phase-separated porous nanocomposite with ultralow percolation threshold for wireless bioelectronics. NATURE NANOTECHNOLOGY 2024:10.1038/s41565-024-01658-6. [PMID: 38684805 DOI: 10.1038/s41565-024-01658-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/09/2023] [Accepted: 03/25/2024] [Indexed: 05/02/2024]
Abstract
Realizing the full potential of stretchable bioelectronics in wearables, biomedical implants and soft robotics necessitates conductive elastic composites that are intrinsically soft, highly conductive and strain resilient. However, existing composites usually compromise electrical durability and performance due to disrupted conductive paths under strain and rely heavily on a high content of conductive filler. Here we present an in situ phase-separation method that facilitates microscale silver nanowire assembly and creates self-organized percolation networks on pore surfaces. The resultant nanocomposites are highly conductive, strain insensitive and fatigue tolerant, while minimizing filler usage. Their resilience is rooted in multiscale porous polymer matrices that dissipate stress and rigid conductive fillers adapting to strain-induced geometry changes. Notably, the presence of porous microstructures reduces the percolation threshold (Vc = 0.00062) by 48-fold and suppresses electrical degradation even under strains exceeding 600%. Theoretical calculations yield results that are quantitatively consistent with experimental findings. By pairing these nanocomposites with near-field communication technologies, we have demonstrated stretchable wireless power and data transmission solutions that are ideal for both skin-interfaced and implanted bioelectronics. The systems enable battery-free wireless powering and sensing of a range of sweat biomarkers-with less than 10% performance variation even at 50% strain. Ultimately, our strategy offers expansive material options for diverse applications.
Collapse
Affiliation(s)
- Yadong Xu
- Department of Chemical and Biomedical Engineering, University of Missouri, Columbia, MO, USA
- Andrew and Peggy Cherng Department of Medical Engineering, Division of Engineering and Applied Science, California Institute of Technology, Pasadena, CA, USA
| | - Zhilu Ye
- Department of Electrical and Computer Engineering, University of Illinois at Chicago, Chicago, IL, USA
| | - Ganggang Zhao
- Department of Mechanical and Aerospace Engineering, University of Missouri, Columbia, MO, USA
| | - Qihui Fei
- Department of Chemical and Biomedical Engineering, University of Missouri, Columbia, MO, USA
| | - Zehua Chen
- Department of Chemical and Biomedical Engineering, University of Missouri, Columbia, MO, USA
| | - Jiahong Li
- Andrew and Peggy Cherng Department of Medical Engineering, Division of Engineering and Applied Science, California Institute of Technology, Pasadena, CA, USA
| | - Minye Yang
- Department of Electrical and Computer Engineering, University of Illinois at Chicago, Chicago, IL, USA
| | - Yichong Ren
- Department of Electrical and Computer Engineering, University of Illinois at Chicago, Chicago, IL, USA
| | - Benton Berigan
- Department of Chemical and Biomedical Engineering, University of Missouri, Columbia, MO, USA
| | - Yun Ling
- Department of Mechanical and Aerospace Engineering, University of Missouri, Columbia, MO, USA
| | - Xiaoyan Qian
- Department of Chemical and Biomedical Engineering, University of Missouri, Columbia, MO, USA
| | - Lin Shi
- Department of Chemical and Biomedical Engineering, University of Missouri, Columbia, MO, USA
| | - Ilker Ozden
- Department of Chemical and Biomedical Engineering, University of Missouri, Columbia, MO, USA
| | - Jingwei Xie
- Department of Surgery-Transplant and Mary and Dick Holland Regenerative Medicine Program, University of Nebraska Medical Center, Omaha, NE, USA
| | - Wei Gao
- Andrew and Peggy Cherng Department of Medical Engineering, Division of Engineering and Applied Science, California Institute of Technology, Pasadena, CA, USA.
| | - Pai-Yen Chen
- Department of Electrical and Computer Engineering, University of Illinois at Chicago, Chicago, IL, USA.
| | - Zheng Yan
- Department of Chemical and Biomedical Engineering, University of Missouri, Columbia, MO, USA.
- Department of Mechanical and Aerospace Engineering, University of Missouri, Columbia, MO, USA.
- Materials Science and Engineering Institute, University of Missouri, Columbia, MO, USA.
- NextGen Precision Health, University of Missouri, Columbia, MO, USA.
| |
Collapse
|
3
|
Ye Y, Hong Y, Liang Q, Wang Y, Wang P, Luo J, Yin A, Ren Z, Liu H, Qi X, He S, Yu S, Wei J. Bioinspired electrically stable, optically tunable thermal management electronic skin via interfacial self-assembly. J Colloid Interface Sci 2024; 660:608-616. [PMID: 38266342 DOI: 10.1016/j.jcis.2024.01.041] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/27/2023] [Revised: 12/27/2023] [Accepted: 01/06/2024] [Indexed: 01/26/2024]
Abstract
The skin is the largest organ in the human body and serves vital functions such as sensation, thermal management, and protection. While electronic skin (E-skin) has made significant progress in sensory functions, achieving adaptive thermal management akin to human skin has remained a challenge. Drawing inspiration from squid skin, we have developed a hybrid electronic-photonic skin (hEP-skin) using an elastomer semi-embedded with aligned silver nanowires through interfacial self-assembly. With mechanically adjustable optical properties, the hEP-skin demonstrates adaptive thermal management abilities, warming in the range of +3.5°C for heat preservation and cooling in the range of -4.2°C for passive cooling. Furthermore, it exhibits an ultra-stable high electrical conductivity of ∼4.5×104 S/cm, even under stretching, bending or torsional deformations over 10,000 cycles. As a proof of demonstration, the hEP-skin successfully integrates stretchable light-emitting electronic skin with adaptive thermal management photonic skin.
Collapse
Affiliation(s)
- Yang Ye
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Yang Hong
- School of Science, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Qimin Liang
- School of Science, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Yuxin Wang
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Peike Wang
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Jingjing Luo
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Ao Yin
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Zhongqi Ren
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Haipeng Liu
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Xue Qi
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Sisi He
- School of Science, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China.
| | - Suzhu Yu
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China.
| | - Jun Wei
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China.
| |
Collapse
|
4
|
Lee DH, Lim T, Pyeon J, Park H, Lee SW, Lee S, Kim W, Kim M, Lee JC, Kim DW, Han S, Kim H, Park S, Choi YK. Self-Mixed Biphasic Liquid Metal Composite with Ultra-High Stretchability and Strain-Insensitivity for Neuromorphic Circuits. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2310956. [PMID: 38196140 DOI: 10.1002/adma.202310956] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/20/2023] [Revised: 11/29/2023] [Indexed: 01/11/2024]
Abstract
Neuromorphic circuits that can function under extreme deformations are important for various data-driven wearable and robotic applications. Herein, biphasic liquid metal particle (BMP) with unprecedented stretchability and strain-insensitivity (ΔR/R0 = 1.4@ 1200% strain) is developed to realize a stretchable neuromorphic circuit that mimics a spike-based biologic sensory system. The BMP consists of liquid metal particles (LMPs) and rigid liquid metal particles (RLMPs), which are homogeneously mixed via spontaneous solutal-Marangoni mixing flow during coating. This permits facile single step patterning directly on various substrates at room temperature. BMP is highly conductive (2.3 × 106 S/m) without any post activation steps. BMP interconnects are utilized for a sensory system, which is capable of distinguishing variations of biaxial strains with a spiking neural network, thus demonstrating their potential for various sensing and signal processing applications.
Collapse
Affiliation(s)
- Do Hoon Lee
- School of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Taesu Lim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Jeongsu Pyeon
- Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Hyunmin Park
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Sang-Won Lee
- School of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Seungkyu Lee
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Wonsik Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Min Kim
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Jeong-Chan Lee
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Do-Wan Kim
- School of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Seungmin Han
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Hyoungsoo Kim
- Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Steve Park
- Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
- KAIST Institute for Health Science and Technology 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| | - Yang-Kyu Choi
- School of Electrical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon, 34141, Republic of Korea
| |
Collapse
|
5
|
Xiang Z, Wang H, Zhao P, Fa X, Wan J, Wang Y, Xu C, Yao S, Zhao W, Zhang H, Han M. Hard Magnetic Graphene Nanocomposite for Multimodal, Reconfigurable Soft Electronics. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2308575. [PMID: 38153331 DOI: 10.1002/adma.202308575] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/23/2023] [Revised: 11/20/2023] [Indexed: 12/29/2023]
Abstract
Soft electronics provide effective means for continuous monitoring of a diverse set of biophysical and biochemical signals from the human body. However, the sensitivities, functions, spatial distributions, and many other features of such sensors remain fixed after deployment and cannot be adjusted on demand. Here, laser-induced porous graphene is exploited as the sensing material, and dope it with permanent magnetic particles to create hard magnetic graphene nanocomposite (HMGN) that can self-assemble onto a flexible carrying substrate through magnetic force, in a reversible and reconfigurable manner. A set of soft electronics in HMGN exhibits enhanced performances in the measurements of electrophysiological signals, temperature, and concentrations of metabolites. All these flexible HMGN sensors can adhere to a carrying substrate at any position and in any spatial arrangement, to allow for wearable sensing with customizable sensitivity, modality, and spatial coverage. The HMGN represents a promising material for constructing soft electronics that can be reconfigured for various applications.
Collapse
Affiliation(s)
- Zehua Xiang
- National Key Laboratory of Science and Technology on Micro/Nano Fabrication, Department of Biomedical Engineering, College of Future Technology, Peking University, Beijing, 100871, China
- Beijing Advanced Innovation Center for Integrated Circuits, School of Integrated Circuits, Peking University, Beijing, 100871, China
| | - Haobin Wang
- Beijing Advanced Innovation Center for Integrated Circuits, School of Integrated Circuits, Peking University, Beijing, 100871, China
| | - Pengcheng Zhao
- Beijing Advanced Innovation Center for Integrated Circuits, School of Integrated Circuits, Peking University, Beijing, 100871, China
| | - Xinying Fa
- School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing, 100083, China
| | - Ji Wan
- National Key Laboratory of Science and Technology on Micro/Nano Fabrication, Department of Biomedical Engineering, College of Future Technology, Peking University, Beijing, 100871, China
- Beijing Advanced Innovation Center for Integrated Circuits, School of Integrated Circuits, Peking University, Beijing, 100871, China
| | - Yaozheng Wang
- Beijing Advanced Innovation Center for Integrated Circuits, School of Integrated Circuits, Peking University, Beijing, 100871, China
| | - Chen Xu
- National Key Laboratory of Science and Technology on Micro/Nano Fabrication, Department of Biomedical Engineering, College of Future Technology, Peking University, Beijing, 100871, China
- Academy for Advanced Interdisciplinary Studies, Peking University, Beijing, 100871, China
| | - Shenglian Yao
- School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing, 100083, China
| | - Wei Zhao
- Department of Cardiology and Institute of Vascular Medicine, Peking University Third Hospital, NHC Key Laboratory of Cardiovascular Molecular Biology and Regulatory Peptides, Key Laboratory of Molecular Cardiovascular Science, Ministry of Education, Beijing Key Laboratory of Cardiovascular Receptors Research, Beijing, 100191, China
| | - Haixia Zhang
- Beijing Advanced Innovation Center for Integrated Circuits, School of Integrated Circuits, Peking University, Beijing, 100871, China
- Academy for Advanced Interdisciplinary Studies, Peking University, Beijing, 100871, China
| | - Mengdi Han
- National Key Laboratory of Science and Technology on Micro/Nano Fabrication, Department of Biomedical Engineering, College of Future Technology, Peking University, Beijing, 100871, China
| |
Collapse
|
6
|
Wang S, Tian H, Wang Y, Zuo H, Tao C, Liu J, Li P, Yang Y, Kou X, Wang J, Kang W. Ruptured liquid metal microcapsules enabling hybridized silver nanowire networks towards high-performance deformable transparent conductors. NANOSCALE 2024. [PMID: 38477150 DOI: 10.1039/d3nr06508a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 03/14/2024]
Abstract
Extensive studies have been carried out on silver nanowires (AgNWs) in view of their impressive conductivity and highly flexible one-dimensional structure. They are seen as a promising choice for producing deformable transparent conductors. Nonetheless, the widespread adoption of AgNW-based transparent conductors is hindered by critical challenges represented by the significant contact resistance at the nanowire junctions and inadequate interfacial adhesion between the nanowires and the substrate. This study presents a novel solution to tackle the aforementioned challenges by capitalizing on liquid metal microcapsules (LMMs). Upon exposure to acid vapor, the encapsulated LMMs rupture, releasing the fluid LM which then forms a metallic overlay and hybridizes with the underlying Ag network. As a result, a transparent conductive film with greatly enhanced electrical and mechanical properties was obtained. The transparent conductor displays negligible resistance variation even after undergoing chemical stability, adhesion, and bending tests, and ultrasonic treatment. This indicates its outstanding adhesion strength to the substrate and mechanical flexibility. The exceptional electrical properties and robust mechanical stability of the transparent conductor position it as an ideal choice for direct integration into flexible touch panels and wearable strain sensors, as evidenced in this study. By resolving the critical challenges in this field, the proposed strategy establishes a compelling roadmap to navigate the development of high-performance AgNW-based transparent conductors, setting a solid foundation for further advancement in the field of deformable electronics.
Collapse
Affiliation(s)
- Shipeng Wang
- School of Mechanical Engineering, Sichuan University, Chengdu 610065, China.
| | - Huaisen Tian
- School of Mechanical Engineering, Sichuan University, Chengdu 610065, China.
| | - Yawen Wang
- State Key Laboratory of Environment-Friendly Energy Materials, Southwest University of Science and Technology, Mianyang, 621010, China.
| | - Haojie Zuo
- State Key Laboratory of Environment-Friendly Energy Materials, Southwest University of Science and Technology, Mianyang, 621010, China.
| | - Chengliang Tao
- School of Mechanical Engineering, Sichuan University, Chengdu 610065, China.
| | - Jiawei Liu
- School of Mechanical Engineering, Sichuan University, Chengdu 610065, China.
| | - Pengyuan Li
- School of Mechanical Engineering, Sichuan University, Chengdu 610065, China.
| | - Yan Yang
- School of Mechanical Engineering, Sichuan University, Chengdu 610065, China.
| | - Xu Kou
- School of Mechanical Engineering, Sichuan University, Chengdu 610065, China.
| | - Jiangxin Wang
- School of Mechanical Engineering, Sichuan University, Chengdu 610065, China.
| | - Wenbin Kang
- State Key Laboratory of Environment-Friendly Energy Materials, Southwest University of Science and Technology, Mianyang, 621010, China.
| |
Collapse
|
7
|
Ding Y, Jiang J, Wu Y, Zhang Y, Zhou J, Zhang Y, Huang Q, Zheng Z. Porous Conductive Textiles for Wearable Electronics. Chem Rev 2024; 124:1535-1648. [PMID: 38373392 DOI: 10.1021/acs.chemrev.3c00507] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/21/2024]
Abstract
Over the years, researchers have made significant strides in the development of novel flexible/stretchable and conductive materials, enabling the creation of cutting-edge electronic devices for wearable applications. Among these, porous conductive textiles (PCTs) have emerged as an ideal material platform for wearable electronics, owing to their light weight, flexibility, permeability, and wearing comfort. This Review aims to present a comprehensive overview of the progress and state of the art of utilizing PCTs for the design and fabrication of a wide variety of wearable electronic devices and their integrated wearable systems. To begin with, we elucidate how PCTs revolutionize the form factors of wearable electronics. We then discuss the preparation strategies of PCTs, in terms of the raw materials, fabrication processes, and key properties. Afterward, we provide detailed illustrations of how PCTs are used as basic building blocks to design and fabricate a wide variety of intrinsically flexible or stretchable devices, including sensors, actuators, therapeutic devices, energy-harvesting and storage devices, and displays. We further describe the techniques and strategies for wearable electronic systems either by hybridizing conventional off-the-shelf rigid electronic components with PCTs or by integrating multiple fibrous devices made of PCTs. Subsequently, we highlight some important wearable application scenarios in healthcare, sports and training, converging technologies, and professional specialists. At the end of the Review, we discuss the challenges and perspectives on future research directions and give overall conclusions. As the demand for more personalized and interconnected devices continues to grow, PCT-based wearables hold immense potential to redefine the landscape of wearable technology and reshape the way we live, work, and play.
Collapse
Affiliation(s)
- Yichun Ding
- School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
- Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350108, P. R. China
- Fujian Science & Technology Innovation Laboratory for Optoelectronic Information of China, Fuzhou, Fujian 350108, P. R. China
| | - Jinxing Jiang
- School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
| | - Yingsi Wu
- School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
| | - Yaokang Zhang
- School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
| | - Junhua Zhou
- School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
| | - Yufei Zhang
- School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
| | - Qiyao Huang
- School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
- Research Institute for Intelligent Wearable Systems, The Hong Kong Polytechnic University, Hong Kong SAR 999077, P. R. China
| | - Zijian Zheng
- School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
- Department of Applied Biology and Chemical Technology, Faculty of Science, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR 999077, P. R. China
- Research Institute for Intelligent Wearable Systems, The Hong Kong Polytechnic University, Hong Kong SAR 999077, P. R. China
- Research Institute for Smart Energy, The Hong Kong Polytechnic University, Hong Kong SAR 999077, P. R. China
| |
Collapse
|
8
|
Park H, Kim DC. Structural and Material-Based Approaches for the Fabrication of Stretchable Light-Emitting Diodes. MICROMACHINES 2023; 15:66. [PMID: 38258185 PMCID: PMC10821428 DOI: 10.3390/mi15010066] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/03/2023] [Revised: 12/22/2023] [Accepted: 12/27/2023] [Indexed: 01/24/2024]
Abstract
Stretchable displays, capable of freely transforming their shapes, have received significant attention as alternatives to conventional rigid displays, and they are anticipated to provide new opportunities in various human-friendly electronics applications. As a core component of stretchable displays, high-performance stretchable light-emitting diodes (LEDs) have recently emerged. The approaches to fabricate stretchable LEDs are broadly categorized into two groups, namely "structural" and "material-based" approaches, based on the mechanisms to tolerate strain. While structural approaches rely on specially designed geometries to dissipate applied strain, material-based approaches mainly focus on replacing conventional rigid components of LEDs to soft and stretchable materials. Here, we review the latest studies on the fabrication of stretchable LEDs, which is accomplished through these distinctive strategies. First, we introduce representative device designs for efficient strain distribution, encompassing island-bridge structures, wavy buckling, and kirigami-/origami-based structures. For the material-based approaches, we discuss the latest studies for intrinsically stretchable (is-) electronic/optoelectronic materials, including the formation of conductive nanocomposite and polymeric blending with various additives. The review also provides examples of is-LEDs, focusing on their luminous performance and stretchability. We conclude this review with a brief outlook on future technologies.
Collapse
Affiliation(s)
- Hamin Park
- Department of Electronic Engineering, Kwangwoon University, 20, Gwangun-ro, Nowon-gu, Seoul 01897, Republic of Korea
| | - Dong Chan Kim
- Department of Chemical and Biological Engineering, Gachon University, 1342 Seongnam-daero, Sujeong-gu, Seongnam-si 13120, Republic of Korea
| |
Collapse
|
9
|
Jung D, Kim Y, Lee H, Jung S, Park C, Hyeon T, Kim DH. Metal-Like Stretchable Nanocomposite Using Locally-Bundled Nanowires for Skin-Mountable Devices. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2303458. [PMID: 37591512 DOI: 10.1002/adma.202303458] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/13/2023] [Revised: 08/06/2023] [Indexed: 08/19/2023]
Abstract
Stretchable conductive nanocomposites have been intensively studied for wearable bioelectronics. However, development of nanocomposites that simultaneously feature metal-like conductivity(> 100 000 S cm-1 ) and high stretchability (> 100%) for high-performance skin-mountable devices is still extremely challenging. Here a material strategy for such a nanocomposite is presented by using local bundling of silver nanowires stabilized with dual ligands (i.e., 1-propanethiols and 1-decanethiols). When the nanocomposite is solidified via solvent evaporation under a highly humid condition, the nanowires in the organic solution are bundled and stabilized. The resulting locally-bundled nanowires lower contact resistance while maintain their percolation network, leading to high conductivity. Dual ligands of 1-propanethiol and 1-decanethiol further boost up the conductivity. As a result, a nanocomposite with both high conductivity of ≈122,120 S cm-1 and high stretchability of ≈200% is obtained. Such superb electrical and mechanical properties are critical for various applications in skin-like electronics, and herein, a wearable thermo-stimulation device is demonstrated.
Collapse
Affiliation(s)
- Dongjun Jung
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul, 08826, Republic of Korea
- School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul, 08826, Republic of Korea
| | - Yeongjun Kim
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul, 08826, Republic of Korea
- School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul, 08826, Republic of Korea
| | - Hyunjin Lee
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul, 08826, Republic of Korea
- School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul, 08826, Republic of Korea
| | - Sonwoo Jung
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul, 08826, Republic of Korea
- School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul, 08826, Republic of Korea
| | - Chansul Park
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul, 08826, Republic of Korea
- School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul, 08826, Republic of Korea
| | - Taeghwan Hyeon
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul, 08826, Republic of Korea
- School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul, 08826, Republic of Korea
| | - Dae-Hyeong Kim
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul, 08826, Republic of Korea
- School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul, 08826, Republic of Korea
- Department of Materials Science and Engineering, Seoul National University, Seoul, 08826, Republic of Korea
| |
Collapse
|
10
|
Zhu Z, Wang X, Li D, Yu H, Li X, Guo F. Solvent Welding-Based Methods Gently and Effectively Enhance the Conductivity of a Silver Nanowire Network. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:2865. [PMID: 37947710 PMCID: PMC10650926 DOI: 10.3390/nano13212865] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/08/2023] [Revised: 10/25/2023] [Accepted: 10/26/2023] [Indexed: 11/12/2023]
Abstract
To enhance the conductivity of a silver nanowire (Ag NW) network, a facile solvent welding method was developed. Soaking a Ag NW network in ethylene glycol (EG) or alcohol for less than 15 min decreased the resistance about 70%. Further combined solvent processing via a plasmonic welding approach decreased the resistance about 85%. This was achieved by simply exposing the EG-soaked Ag NW network to a low-power blue light (60 mW/cm2). Research results suggest that poly(vinylpyrrolidone) (PVP) dissolution by solvent brings nanowires into closer contact, and this reduced gap distance between nanowires enhances the plasmonic welding effect, hence further decreasing resistance. Aside from this dual combination of methods, a triple combination with Joule heating welding induced by applying a current to the Ag NW network decreased the resistance about 96%. Although conductivity was significantly enhanced, our results showed that the melting at Ag NW junctions was relatively negligible, which indicates that the enhancement in conductivity could be attributed to the removal of PVP layers. Moreover, the approaches were quite gentle so any potential damage to Ag NWs or polymer substrates by overheating (e.g., excessive Joule heating) was avoided entirely, making the approaches suitable for application in devices using heat-sensitive materials.
Collapse
Affiliation(s)
- Zhaoxi Zhu
- Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China; (Z.Z.); (D.L.); (H.Y.); (X.L.)
| | - Xiaolu Wang
- Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China; (Z.Z.); (D.L.); (H.Y.); (X.L.)
- Key Laboratory of Advanced Functional Materials, Ministry of Education, Beijing 100124, China
| | - Dan Li
- Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China; (Z.Z.); (D.L.); (H.Y.); (X.L.)
| | - Haiyang Yu
- Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China; (Z.Z.); (D.L.); (H.Y.); (X.L.)
| | - Xuefei Li
- Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China; (Z.Z.); (D.L.); (H.Y.); (X.L.)
| | - Fu Guo
- Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100124, China; (Z.Z.); (D.L.); (H.Y.); (X.L.)
- Key Laboratory of Advanced Functional Materials, Ministry of Education, Beijing 100124, China
- School of Mechanical Electrical Engineering, Beijing Information Science and Technology University, Beijing 100192, China
| |
Collapse
|
11
|
Bian X, Yang Z, Zhang T, Yu J, Xu G, Chen A, He Q, Pan J. Multifunctional Flexible AgNW/MXene/PDMS Composite Films for Efficient Electromagnetic Interference Shielding and Strain Sensing. ACS APPLIED MATERIALS & INTERFACES 2023; 15:41906-41915. [PMID: 37610108 DOI: 10.1021/acsami.3c08093] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 08/24/2023]
Abstract
With the rapid development of electronic information technology, composite materials with outstanding performance in terms of electromagnetic interference (EMI) shielding and strain sensing are crucial for next-generation smart wearable electronic devices. However, the fabrication of flexible composite films with dual functionality remains a significant challenge. Herein, multifunctional flexible composite films with exciting EMI shielding and strain sensing properties were constructed using a facile vacuum-assisted filtration process and transfer method. The films consisted of ultrathin AgNW/MXene (Ti3C2Tx)/AgNW conductive networks (1 μm) attached to a flexible polydimethylsiloxane (PDMS) substrate. The obtained AgNW/MXene/PDMS composite film exhibited an exceptional EMI shielding effectiveness of 50.82 dB and good flexibility (retaining 93.67 and 90.18% of its original value after 1000 bending and stretching cycles, respectively), which are attributed to the enhanced multilayer internal reflection network created by the AgNWs and MXene as well as the synergistic effect of PDMS. Besides EMI shielding, the composite films also displayed remarkable strain sensing properties. They exhibited a wide linear range of tensile strain up to 68% with a gauge factor of 468. They also showed fast response, ultralow detection limit, and high mechanical stability. Interestingly, the composite films could also detect motion and voice recognition, demonstrating their potential as wearable sensors. This study highlights the effectiveness of multifunctional flexible AgNW/MXene/PDMS composite films in resisting electromagnetic radiation and monitoring human motion, thereby providing a promising solution for the development of flexible wearable electronic devices in complex electromagnetic environments.
Collapse
Affiliation(s)
- Xiaolong Bian
- College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310014, People's Republic of China
| | - Zhonglin Yang
- College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310014, People's Republic of China
| | - Tao Zhang
- College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310014, People's Republic of China
| | - Jiewen Yu
- College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310014, People's Republic of China
| | - Gaopeng Xu
- College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310014, People's Republic of China
| | - An Chen
- College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310014, People's Republic of China
| | - Qingquan He
- College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310014, People's Republic of China
| | - Jun Pan
- College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310014, People's Republic of China
| |
Collapse
|
12
|
Won D, Bang J, Choi SH, Pyun KR, Jeong S, Lee Y, Ko SH. Transparent Electronics for Wearable Electronics Application. Chem Rev 2023; 123:9982-10078. [PMID: 37542724 PMCID: PMC10452793 DOI: 10.1021/acs.chemrev.3c00139] [Citation(s) in RCA: 9] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/07/2023] [Indexed: 08/07/2023]
Abstract
Recent advancements in wearable electronics offer seamless integration with the human body for extracting various biophysical and biochemical information for real-time health monitoring, clinical diagnostics, and augmented reality. Enormous efforts have been dedicated to imparting stretchability/flexibility and softness to electronic devices through materials science and structural modifications that enable stable and comfortable integration of these devices with the curvilinear and soft human body. However, the optical properties of these devices are still in the early stages of consideration. By incorporating transparency, visual information from interfacing biological systems can be preserved and utilized for comprehensive clinical diagnosis with image analysis techniques. Additionally, transparency provides optical imperceptibility, alleviating reluctance to wear the device on exposed skin. This review discusses the recent advancement of transparent wearable electronics in a comprehensive way that includes materials, processing, devices, and applications. Materials for transparent wearable electronics are discussed regarding their characteristics, synthesis, and engineering strategies for property enhancements. We also examine bridging techniques for stable integration with the soft human body. Building blocks for wearable electronic systems, including sensors, energy devices, actuators, and displays, are discussed with their mechanisms and performances. Lastly, we summarize the potential applications and conclude with the remaining challenges and prospects.
Collapse
Affiliation(s)
- Daeyeon Won
- Applied
Nano and Thermal Science Lab, Department of Mechanical Engineering, Seoul National University, Seoul 08826, Korea
| | - Junhyuk Bang
- Applied
Nano and Thermal Science Lab, Department of Mechanical Engineering, Seoul National University, Seoul 08826, Korea
| | - Seok Hwan Choi
- Applied
Nano and Thermal Science Lab, Department of Mechanical Engineering, Seoul National University, Seoul 08826, Korea
| | - Kyung Rok Pyun
- Applied
Nano and Thermal Science Lab, Department of Mechanical Engineering, Seoul National University, Seoul 08826, Korea
| | - Seongmin Jeong
- Applied
Nano and Thermal Science Lab, Department of Mechanical Engineering, Seoul National University, Seoul 08826, Korea
| | - Youngseok Lee
- Applied
Nano and Thermal Science Lab, Department of Mechanical Engineering, Seoul National University, Seoul 08826, Korea
| | - Seung Hwan Ko
- Applied
Nano and Thermal Science Lab, Department of Mechanical Engineering, Seoul National University, Seoul 08826, Korea
- Institute
of Engineering Research/Institute of Advanced Machinery and Design
(SNU-IAMD), Seoul National University, Seoul 08826, South Korea
| |
Collapse
|
13
|
Nan Z, Wei W, Lin Z, Chang J, Hao Y. Flexible Nanocomposite Conductors for Electromagnetic Interference Shielding. NANO-MICRO LETTERS 2023; 15:172. [PMID: 37420119 PMCID: PMC10328908 DOI: 10.1007/s40820-023-01122-5] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/27/2023] [Accepted: 05/02/2023] [Indexed: 07/09/2023]
Abstract
HIGHLIGHTS Convincing candidates of flexible (stretchable/compressible) electromagnetic interference shielding nanocomposites are discussed in detail from the views of fabrication, mechanical elasticity and shielding performance. Detailed summary of the relationship between deformation of materials and electromagnetic shielding performance. The future directions and challenges in developing flexible (particularly elastic) shielding nanocomposites are highlighted. With the extensive use of electronic communication technology in integrated circuit systems and wearable devices, electromagnetic interference (EMI) has increased dramatically. The shortcomings of conventional rigid EMI shielding materials include high brittleness, poor comfort, and unsuitability for conforming and deformable applications. Hitherto, flexible (particularly elastic) nanocomposites have attracted enormous interest due to their excellent deformability. However, the current flexible shielding nanocomposites present low mechanical stability and resilience, relatively poor EMI shielding performance, and limited multifunctionality. Herein, the advances in low-dimensional EMI shielding nanomaterials-based elastomers are outlined and a selection of the most remarkable examples is discussed. And the corresponding modification strategies and deformability performance are summarized. Finally, expectations for this quickly increasing sector are discussed, as well as future challenges.
Collapse
Affiliation(s)
- Ze Nan
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology, School of Microelectronics, Xidian University, 2 South Taibai Road, Xi'an, 710071, People's Republic of China
| | - Wei Wei
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology, School of Microelectronics, Xidian University, 2 South Taibai Road, Xi'an, 710071, People's Republic of China.
- Advanced Interdisciplinary Research Center for Flexible Electronics, Xidian University, 2 South Taibai Road, Xi'an, 710071, People's Republic of China.
| | - Zhenhua Lin
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology, School of Microelectronics, Xidian University, 2 South Taibai Road, Xi'an, 710071, People's Republic of China
| | - Jingjing Chang
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology, School of Microelectronics, Xidian University, 2 South Taibai Road, Xi'an, 710071, People's Republic of China.
- Advanced Interdisciplinary Research Center for Flexible Electronics, Xidian University, 2 South Taibai Road, Xi'an, 710071, People's Republic of China.
| | - Yue Hao
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology, School of Microelectronics, Xidian University, 2 South Taibai Road, Xi'an, 710071, People's Republic of China
| |
Collapse
|
14
|
Fan Q, Fan H, Li K, Hou C, Zhang Q, Li Y, Wang H. Stretchable, Electrochemically-Stable Electrochromic Devices Based on Semi-Embedded Ag@Au Nanowire Network. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2208234. [PMID: 36866459 DOI: 10.1002/smll.202208234] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/29/2022] [Revised: 02/08/2023] [Indexed: 06/02/2023]
Abstract
Stretchable electrochromic (EC) devices that can adapt the irregular and dynamic human surfaces show promising applications in wearable display, adaptive camouflage, and visual sensation. However, challenges exist in lacking transparent conductive electrodes with both tensile and electrochemical stability to assemble the complex device structure and endure harsh electrochemical redox reactions. Herein, a wrinkled, semi-embedded Ag@Au nanowire (NW) networks are constructed on elastomer substrates to fabricate stretchable, electrochemically-stable conductive electrodes. The stretchable EC devices are then fabricated by sandwiching a viologen-based gel electrolyte between two conductive electrodes with the semi-embedded Ag@Au NW network. Because the inert Au layer inhibits the oxidation of Ag NWs, the EC device exhibits much more stable color changes between yellow and green than those with pure Ag NW networks. In addition, since the wrinkled semi-embedded structure is deformable and reversibly stretched without serious fractures, the EC devices still maintain excellent color-changing stability under 40% stretching/releasing cycles.
Collapse
Affiliation(s)
- Qingchao Fan
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai, 201620, P. R. China
| | - Hongwei Fan
- Instrumental Analysis & Research Center, Shanghai University, Shanghai, 200444, P. R. China
| | - Kerui Li
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai, 201620, P. R. China
| | - Chengyi Hou
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai, 201620, P. R. China
| | - Qinghong Zhang
- Engineering Research Center of Advanced Glasses Manufacturing Technology, Ministry of Education, Donghua University, Shanghai, 201620, P. R. China
| | - Yaogang Li
- Engineering Research Center of Advanced Glasses Manufacturing Technology, Ministry of Education, Donghua University, Shanghai, 201620, P. R. China
| | - Hongzhi Wang
- State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai, 201620, P. R. China
| |
Collapse
|
15
|
Zhang HW, Bi YG, Shan DM, Chen ZY, Wang YF, Sun HB, Feng J. Highly flexible organo-metal halide perovskite solar cells based on silver nanowire-polymer hybrid electrodes. NANOSCALE 2023; 15:5429-5436. [PMID: 36843427 DOI: 10.1039/d2nr07026j] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Flexible perovskite solar cells (FPSCs) have attracted considerable attention due to their broad application possibilities in next generation electronics. However, the commonly used transparent conductive electrodes (TCEs), such as indium tin oxide (ITO), suffer from poor flexible performance, impeding the development of FPSCs. Here, we propose a hybrid electrode (PUA/AgNWs/PH1000) comprising a thin percolation network of silver nanowires (AgNWs) inlaid on the surface of a flexible substrate (PUA) modified with a conductive layer (PH1000), which exhibits high optical transmittance and electrical conductivity, as well as robust mechanical flexibility. By applying the proposed PUA/AgNWs/PH1000 hybrid electrode in FPSCs, the resulting ITO-free devices exhibit the desired flexibility and mechanical stability; it can survive repeated continuous bending cycles and retain 77.4% of its initial power conversion efficiency after 10 000 bending cycles with the bending radius of 5 mm.
Collapse
Affiliation(s)
- Han-Wen Zhang
- State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, Changchun 130012, China.
| | - Yan-Gang Bi
- State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, Changchun 130012, China.
| | - Dong-Ming Shan
- State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, Changchun 130012, China.
| | - Zhi-Yu Chen
- State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, Changchun 130012, China.
| | - Yi-Fan Wang
- State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, Changchun 130012, China.
| | - Hong-Bo Sun
- State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, Changchun 130012, China.
- State Key Laboratory of Precision Measurement Technology and Instruments, Department of Precision Instrument, Tsinghua University, Haidian, Beijing 100084, China.
| | - Jing Feng
- State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, Changchun 130012, China.
| |
Collapse
|
16
|
Fang R, Li Z, Guo L, Li H. Structural evolution and mechanical stabilities of head-to-side nanowelding of Cu-Ag bimetallic nanowires via atomistic simulations. Phys Chem Chem Phys 2023; 25:6424-6435. [PMID: 36779832 DOI: 10.1039/d2cp04965a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/27/2023]
Abstract
Nanowelding, self-healing and mechanical stabilities of conductive networks of Cu-Ag core-shell nanowires are of vital importance for their extensive applications. In this study, atomistic simulations are used to reveal the head-to-side cold welding behavior, ranging from the welding mechanism, mechanical stabilities of the obtained junction and effects of various conditions. The results show that head-to-side cold welding of Cu-Ag bimetallic nanowires can be excellently completed via atomic interaction and diffusion of atoms. Initial deformation in the junction induced in the welding process and welding temperature are proven to exert a significant influence on the mechanical stabilities of the obtained junction. Three different deformation mechanisms are proposed due to various motivations of dislocations. During the uniaxial tensile test of the junction, the plastic deformation map of initial deformation and welding temperature are expounded in detail. It is revealed that for all the involved welding temperatures explored in our study, the highest tensile strength always belongs to the T-junction with no initial deformation. Otherwise, the intersection will become a serious obstacle to a further process of plastic deformation and lead to abnormally larger elongation and lower strength. These findings are expected to provide an in-depth understanding of the deformation mechanism of bimetallic nanowires and provide valuable theoretical guidance for engineering applications.
Collapse
Affiliation(s)
- Ranran Fang
- School of Intelligent Manufacturing and Control Engineering, Shandong Institute of Petroleum and Chemical Technology, Dongying 257061, P. R. China.
| | - Zhentao Li
- School of Intelligent Manufacturing and Control Engineering, Shandong Institute of Petroleum and Chemical Technology, Dongying 257061, P. R. China.
| | - Lijuan Guo
- School of Intelligent Manufacturing and Control Engineering, Shandong Institute of Petroleum and Chemical Technology, Dongying 257061, P. R. China.
| | - Hui Li
- Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Shandong University, Jinan 250061, P. R. China.
| |
Collapse
|
17
|
Kong X, Li H, Wang J, Wang Y, Zhang L, Gong M, Lin X, Wang D. Direct Writing of Silver Nanowire Patterns with Line Width down to 50 μm and Ultrahigh Conductivity. ACS APPLIED MATERIALS & INTERFACES 2023; 15:9906-9915. [PMID: 36762969 DOI: 10.1021/acsami.2c22885] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
Direct writing of one-dimensional nanomaterials with large aspect ratios into customized, highly conductive, and high-resolution patterns is a challenging task. In this work, thin silver nanowires (AgNWs) with a length-to-diameter ratio of 730 are employed as a representative example to demonstrate a potent direct ink writing (DIW) strategy, in which aqueous inks using a natural polymer, sodium alginate, as the thickening agent can be easily patterned with arbitrary geometries and controllable structural features on a variety of planar substrates. With the aid of a quick spray-and-dry postprinting treatment at room temperature, the electrical conductivity and substrate adhesion of the written AgNWs-patterns improve simultaneously. This simple, environment benign, and low-temperature DIW strategy is effective for depositing AgNWs into patterns that are high-resolution (with line width down to 50 μm), highly conductive (up to 1.26 × 105 S/cm), and mechanically robust and have a large alignment order of NWs, regardless of the substrate's hardness, smoothness, and hydrophilicity. Soft electroadhesion grippers utilizing as-manufactured interdigitated AgNWs-electrodes exhibit an increased shear adhesion force of up to 15.5 kPa at a driving voltage of 3 kV, indicating the strategy is very promising for the decentralized and customized manufacturing of soft electrodes for future soft electronics and robotics.
Collapse
Affiliation(s)
- Xiangyi Kong
- School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing 100083, China
| | - Hejian Li
- School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing 100083, China
| | - Jianping Wang
- School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing 100083, China
| | - Yangyang Wang
- School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing 100083, China
| | - Liang Zhang
- School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing 100083, China
| | - Min Gong
- School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing 100083, China
| | - Xiang Lin
- School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing 100083, China
| | - Dongrui Wang
- School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing 100083, China
| |
Collapse
|
18
|
Zhao C, Li FM, Zhai YF, Li S, Yu HY, Wang M. High-Wettability Poly(dimethylsiloxane) Substrate for Ultrastable Conductive Three-Dimensional Woven Ag Nanowire Grids. ACS APPLIED MATERIALS & INTERFACES 2023; 15:4835-4844. [PMID: 36642925 DOI: 10.1021/acsami.2c21898] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Three-dimensional (3D) woven Ag nanowire (AgNW) grids have great potential for enhancing the mechanical stabilities, conductivity, and transmittance of flexible transparent electrodes (FTEs). However, it is a great challenge to control the formation of 3D woven AgNW grids on various substrates, especially the poly(dimethylsiloxane) (PDMS) substrate. This work presents a microtransfer-printing method for preparing a high-wettability poly(dimethylsiloxane) (PDMS) substrate to control the formation of 3D woven AgNW grids. The as-prepared PDMS substrate shows a high wettability performance. The surface structures of the PDMS substrate can control the sharp shrinkage of the ink membrane to give rise to a uniform liquid membrane evaporation behavior, which is the key factor for preparing a uniform 3D woven nanowire network. A thin uniform 3D woven AgNW network with a low sheet resistance of 24.3 Ω/□ and high transmittance of 92% was coated on the PDMS substrate. The networks directly coated the surface of the replicated PDMS, which simplified the peeling process and protected the networks from peeling strain and mechanical deformations. Moreover, the increment of resistance retained a small value (∼5%) when bending cycles reached 9,000. An alternating current electroluminescent (ACEL) device was prepared, and the uniform electroluminescence implies that a defect-free electrode has been fabricated. These results indicate that the as-prepared FTEs have excellent mechanical performance and great potential for flexible optoelectronic applications.
Collapse
Affiliation(s)
- Cong Zhao
- School of Microelectronics, Southern University of Science and Technology, Shenzhen518055, China
- Engineering Research Center of Integrated Circuits for Next-Generation Communications, Ministry of Education, Southern University of Science and Technology, Shenzhen518055, China
| | - Fang-Mei Li
- School of Microelectronics, Southern University of Science and Technology, Shenzhen518055, China
| | - Yu-Fei Zhai
- School of Microelectronics, Southern University of Science and Technology, Shenzhen518055, China
| | - Song Li
- School of Microelectronics, Southern University of Science and Technology, Shenzhen518055, China
| | - Hong-Yu Yu
- School of Microelectronics, Southern University of Science and Technology, Shenzhen518055, China
- Engineering Research Center of Integrated Circuits for Next-Generation Communications, Ministry of Education, Southern University of Science and Technology, Shenzhen518055, China
| | - Min Wang
- School of Microelectronics, Southern University of Science and Technology, Shenzhen518055, China
- Engineering Research Center of Integrated Circuits for Next-Generation Communications, Ministry of Education, Southern University of Science and Technology, Shenzhen518055, China
| |
Collapse
|
19
|
Wang L, Yi Z, Zhao Y, Liu Y, Wang S. Stretchable conductors for stretchable field-effect transistors and functional circuits. Chem Soc Rev 2023; 52:795-835. [PMID: 36562312 DOI: 10.1039/d2cs00837h] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
Abstract
Stretchable electronics have received intense attention due to their broad application prospects in many areas, and can withstand large deformations and form close contact with curved surfaces. Stretchable conductors are vital components of stretchable electronic devices used in wearables, soft robots, and human-machine interactions. Recent advances in stretchable conductors have motivated basic scientific and technological research efforts. Here, we outline and analyse the development of stretchable conductors in transistors and circuits, and examine advances in materials, device engineering, and preparation technologies. We divide the existing approaches to constructing stretchable transistors with stretchable conductors into the following two types: geometric engineering and intrinsic stretchability engineering. Finally, we consider the challenges and outlook in this field for delivering stretchable electronics.
Collapse
Affiliation(s)
- Liangjie Wang
- Department of Materials Science, Fudan University, Shanghai 200433, P. R. China.
| | - Zhengran Yi
- Department of Materials Science, Fudan University, Shanghai 200433, P. R. China.
| | - Yan Zhao
- Department of Materials Science, Fudan University, Shanghai 200433, P. R. China.
| | - Yunqi Liu
- Department of Materials Science, Fudan University, Shanghai 200433, P. R. China.
| | - Shuai Wang
- Department of Materials Science, Fudan University, Shanghai 200433, P. R. China. .,School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074, P. R. China.
| |
Collapse
|
20
|
Ding S, Zhang S, Yin T, Zhang H, Wang C, Wang Y, Li Q, Zhou N, Su F, Jiang Z, Tan D, Yang R. Room-temperature nanojoining of silver nanowires by graphene oxide for highly conductive flexible transparent electrodes. NANOTECHNOLOGY 2022; 34:045201. [PMID: 36265462 DOI: 10.1088/1361-6528/ac9c09] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/02/2022] [Accepted: 10/20/2022] [Indexed: 06/16/2023]
Abstract
Flexible transparent electrodes for touch panels, solar cells, and wearable electronics are in great demand in recent years, and the silver nanowire (AgNW) flexible transparent electrode (FTE) is among the top candidates due to its excellent light transmittance and flexibility and the highest conductivity of silver among all metals. However, the conductivity of an AgNWs network has long been limited by the large contact resistance. Here we show a room-temperature solution process to tackle the challenge by nanojoining AgNWs with two-dimensional graphene oxide (GO). The conductivity of the AgNWs network is improved 18 times due to the enhanced junctions between AgNWs by the coated GOs, and the AgNW-GO FTE exhibits a low sheet resistance of 23 Ohm sq-1and 88% light transmittance. It is stable under high temperature and current and their flexibility is intact after 1000 cycles of bending. Measurements of a bifunctional electrochromic device shows the high performance of the AgNW-GO FTE as a FTE.
Collapse
Affiliation(s)
- Su Ding
- School of Advanced Materials and Nanotechnology, Xidian University, Xi'an 710126, People's Republic of China
| | - Shucheng Zhang
- School of Advanced Materials and Nanotechnology, Xidian University, Xi'an 710126, People's Republic of China
| | - Tong Yin
- School of Advanced Materials and Nanotechnology, Xidian University, Xi'an 710126, People's Republic of China
| | - He Zhang
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, People's Republic of China
| | - Chenxi Wang
- State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, People's Republic of China
| | - Yong Wang
- School of Advanced Materials and Nanotechnology, Xidian University, Xi'an 710126, People's Republic of China
| | - Qikun Li
- School of Advanced Materials and Nanotechnology, Xidian University, Xi'an 710126, People's Republic of China
| | - Nan Zhou
- School of Advanced Materials and Nanotechnology, Xidian University, Xi'an 710126, People's Republic of China
| | - Fengyu Su
- Academy for Advanced Interdisciplinary Studies, Southern University of Science and Technology, Shenzhen 518055, People's Republic of China
| | - Zhi Jiang
- Innovative Center for Flexible Devices (iFLEX), School of Materials Science and Engineering Nanyang Technological University, 639798, Singapore
| | - Dan Tan
- School of Advanced Materials and Nanotechnology, Xidian University, Xi'an 710126, People's Republic of China
| | - Rusen Yang
- School of Advanced Materials and Nanotechnology, Xidian University, Xi'an 710126, People's Republic of China
| |
Collapse
|
21
|
Wang Y, Wang J, Kong X, Gong M, Zhang L, Lin X, Wang D. Origin of Capillary-Force-Induced Welding in Ag Nanowires and Ag Nanowire/Carbon Nanotube Conductive Networks. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:12682-12688. [PMID: 36191128 DOI: 10.1021/acs.langmuir.2c02176] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Capillary-force-induced welding can effectively reduce the contact resistance between two silver nanowires (AgNWs) by merging the NW-NW junctions. Herein, we report a model for quantifying the capillary force between two nano-objects. The model can be used to calculate the capillary force generated between AgNWs and carbon nanotubes (CNTs) during water evaporation. The results indicate that the radius of one-dimensional nano-objects is crucial for capillary-force-induced welding. AgNWs with larger radii can generate a greater capillary force (FAgNW-AgNW) at NW-NW junctions. In addition, for AgNW/CNT hybrid films, the use of CNTs with a radius close to that of AgNWs can result in a larger capillary force (FAgNW-CNT) at NW-CNT junctions. The reliability of the model is verified by measuring the change in sheet resistance before and after capillary-force-induced welding of a series of AgNW and AgNW/CNT conductive films with varying radii.
Collapse
Affiliation(s)
- Yangyang Wang
- Department of Chemistry and Chemical Engineering, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing100083, China
| | - Jianping Wang
- Department of Chemistry and Chemical Engineering, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing100083, China
| | - Xiangyi Kong
- Department of Chemistry and Chemical Engineering, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing100083, China
| | - Min Gong
- Department of Chemistry and Chemical Engineering, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing100083, China
- Beijing Key Laboratory for Bioengineering and Sensing Technology, University of Science and Technology Beijing, Beijing100083, China
| | - Liang Zhang
- Department of Chemistry and Chemical Engineering, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing100083, China
- Beijing Key Laboratory for Bioengineering and Sensing Technology, University of Science and Technology Beijing, Beijing100083, China
| | - Xiang Lin
- Department of Chemistry and Chemical Engineering, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing100083, China
- Beijing Key Laboratory for Bioengineering and Sensing Technology, University of Science and Technology Beijing, Beijing100083, China
| | - Dongrui Wang
- Department of Chemistry and Chemical Engineering, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing100083, China
- Beijing Key Laboratory for Bioengineering and Sensing Technology, University of Science and Technology Beijing, Beijing100083, China
| |
Collapse
|
22
|
Zhu M, Yan X, Li X, Dai L, Guo J, Lei Y, Xu Y, Xu H. Flexible, Transparent, and Hazy Composite Cellulosic Film with Interconnected Silver Nanowire Networks for EMI Shielding and Joule Heating. ACS APPLIED MATERIALS & INTERFACES 2022; 14:45697-45706. [PMID: 36178711 DOI: 10.1021/acsami.2c13035] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
An optical transparent and hazy film with admirable flexibility, electromagnetic interference (EMI) shielding, and Joule heating performance meeting the requirements of optoelectronic devices is significantly desirable. Herein, a cellulose paper was infiltrated by epoxy resin to fabricate a transparent cellulose paper (TCP) with high transparency, optical haze, and favorable flexibility, owing to effective light scattering and mechanical enhancement of the cellulose network. Moreover, a highly connected silver nanowire (AgNW) network was constructed on the TCP substrate by the spray-coating method and appropriate thermal annealing technique to realize high electrical conductivity and favorable optical transmittance of the composite film at the same time, followed by coating of a polydimethylsiloxane (PDMS) layer for protection of the AgNW network. The obtained PDMS/AgNWs/TCP composite film features considerable optical transmittance (up to 86.8%) and haze (up to 97.7%), while satisfactory EMI shielding effectiveness (SE) (up to 39.1 dB, 8.2-12.4 GHz) as well as strong mechanical strength (higher than 41 MPa) were achieved. The coated PDMS layer prevented the AgNW network from falling off and ensured the long-term stability of the PDMS/AgNWs/TCP composite film under deformations. In addition, the multifunctional PDMS/AgNWs/TCP composite film also exhibited excellent Joule heating performance with low supplied voltages, rapid response, and sufficient stability. This work demonstrates a novel pathway to improve the performance of multifunctional transparent composite films for future advanced optoelectronic devices.
Collapse
Affiliation(s)
- Meng Zhu
- College of Bioresources Chemical & Materials Engineering, Shaanxi University of Science & Technology, Xi'an 710021, China
| | - Xuanxuan Yan
- College of Bioresources Chemical & Materials Engineering, Shaanxi University of Science & Technology, Xi'an 710021, China
| | - Xin Li
- Science and Technology on Thermostructural Composite Materials Laboratory, Northwestern Polytechnical University, Xi'an 710072, China
| | - Lei Dai
- College of Bioresources Chemical & Materials Engineering, Shaanxi University of Science & Technology, Xi'an 710021, China
| | - Junhao Guo
- College of Bioresources Chemical & Materials Engineering, Shaanxi University of Science & Technology, Xi'an 710021, China
| | - Yuting Lei
- College of Bioresources Chemical & Materials Engineering, Shaanxi University of Science & Technology, Xi'an 710021, China
| | - Yongjian Xu
- College of Bioresources Chemical & Materials Engineering, Shaanxi University of Science & Technology, Xi'an 710021, China
| | - Hailong Xu
- Frontier Institute of Science and Technology, Xi'an Jiaotong University, Xi'an 710049, China
| |
Collapse
|
23
|
Wang S, Liu H, Pan Y, Xie F, Zhang Y, Zhao J, Wen S, Gao F. Performance Enhancement of Silver Nanowire-Based Transparent Electrodes by Ultraviolet Irradiation. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:2956. [PMID: 36079993 PMCID: PMC9457980 DOI: 10.3390/nano12172956] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 07/18/2022] [Revised: 08/21/2022] [Accepted: 08/25/2022] [Indexed: 06/15/2023]
Abstract
Silver nanowires (AgNWs) are used as transparent electrodes (TE) in many devices. However, the contact mode between the nanowires is the biggest reason why the sheet resistance of silver nanowires is limited. Here, simple and effective ultraviolet (UV) irradiation welding is chosen to solve this problem. The influence of the power density of the UV irradiation on welding of the silver nanowires is studied and the fixed irradiation time is chosen as one minute. The range of the UV (380 nm) irradiation power is chosen from 30 mW/cm2 to 150 mW/cm2. First of all, the transmittance of the silver nanowire film is not found to be affected by the UV welding (400-11,000 nm). The sheet resistance of the silver nanowires decreases to 73.9% at 60 mW/cm2 and increases to 127.6% at 120 mW/cm2. The investigations on the UV irradiation time reveal that the sheet resistance of the AgNWs decreases continuously when the UV irradiation time is varied from 0 to 3 min, and drops to 57.3% of the initial value at 3 min. From 3-6 min of the continuous irradiation time, the change of the sheet resistance is not obvious, which reflects the self-limiting and self-termination of AgNWs welding. By changing the wavelength of the UV irradiation from 350-400 nm, it is found that the welding effect is best when the UV wavelength is 380 nm. The average transmittance, square resistance, and the figure of merit of the welded AgNWs at 400-780 nm are 95.98%, 56.5 Ω/sq, and 117.42 × 10-4 Ω-1, respectively. The UV-welded AgNWs are also used in silicon-based photodetectors, and the quantum efficiency of the device is improved obviously.
Collapse
|
24
|
Zhou H, Han SJ, Harit AK, Kim DH, Kim DY, Choi YS, Kwon H, Kim KN, Go GT, Yun HJ, Hong BH, Suh MC, Ryu SY, Woo HY, Lee TW. Graphene-Based Intrinsically Stretchable 2D-Contact Electrodes for Highly Efficient Organic Light-Emitting Diodes. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2022; 34:e2203040. [PMID: 35697021 DOI: 10.1002/adma.202203040] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/04/2022] [Revised: 05/30/2022] [Indexed: 06/15/2023]
Abstract
Intrinsically stretchable organic light-emitting diodes (ISOLEDs) are becoming essential components of wearable electronics. However, the efficiencies of ISOLEDs have been highly inferior compared with their rigid counterparts, which is due to the lack of ideal stretchable electrode materials that can overcome the poor charge injection at 1D metallic nanowire/organic interfaces. Herein, highly efficient ISOLEDs that use graphene-based 2D-contact stretchable electrodes (TCSEs) that incorporate a graphene layer on top of embedded metallic nanowires are demonstrated. The graphene layer modifies the work function, promotes charge spreading, and impedes inward diffusion of oxygen and moisture. The work function (WF) of 3.57 eV is achieved by forming a strong interfacial dipole after deposition of a newly designed conjugated polyelectrolyte with crown ether and anionic sulfonate groups on TCSE; this is the lowest value ever reported among ISOLEDs, which overcomes the existing problem of very poor electron injection in ISOLEDs. Subsequent pressure-controlled lamination yields a highly efficient fluorescent ISOLED with an unprecedently high current efficiency of 20.3 cd A-1 , which even exceeds that of an otherwise-identical rigid counterpart. Lastly, a 3 inch five-by-five passive matrix ISOLED is demonstrated using convex stretching. This work can provide a rational protocol for designing intrinsically stretchable high-efficiency optoelectronic devices with favorable interfacial electronic structures.
Collapse
Affiliation(s)
- Huanyu Zhou
- Department of Materials Science and Engineering, Seoul National University, Seoul, 08826, Republic of Korea
| | - Shin Jung Han
- Department of Materials Science and Engineering, Seoul National University, Seoul, 08826, Republic of Korea
| | - Amit Kumar Harit
- Department of Chemistry, KU-KIST Graduate School of Converging Science and Technology, Korea University, Seoul, 02841, Republic of Korea
| | - Dong Hyun Kim
- Division of Display and Semiconductor Physics, Display Convergence, College of Science and Technology, E-ICT-Culture-Sports Convergence Track, Korea University, Sejong Campus, Sejong City, 30019, Republic of Korea
| | - Dae Yoon Kim
- Graphene Square Inc., Suwon, 16229, Republic of Korea
| | | | - Hyeokjun Kwon
- Department of Materials Science and Engineering, Seoul National University, Seoul, 08826, Republic of Korea
| | - Kwan-Nyeong Kim
- Department of Materials Science and Engineering, Seoul National University, Seoul, 08826, Republic of Korea
| | - Gyeong-Tak Go
- Department of Materials Science and Engineering, Seoul National University, Seoul, 08826, Republic of Korea
| | - Hyung Joong Yun
- Advanced Nano Research Group, Korea Basic Science Institute (KBSI), Daejeon, 34126, Republic of Korea
| | - Byung Hee Hong
- Graphene Square Inc., Suwon, 16229, Republic of Korea
- Department of Chemistry, Seoul National University, Seoul, 08826, Republic of Korea
| | - Min Chul Suh
- Department of Information Display, Kyung Hee University, Seoul, 02447, Republic of Korea
| | - Seung Yoon Ryu
- Division of Display and Semiconductor Physics, Display Convergence, College of Science and Technology, E-ICT-Culture-Sports Convergence Track, Korea University, Sejong Campus, Sejong City, 30019, Republic of Korea
| | - Han Young Woo
- Department of Chemistry, KU-KIST Graduate School of Converging Science and Technology, Korea University, Seoul, 02841, Republic of Korea
| | - Tae-Woo Lee
- Department of Materials Science and Engineering, Seoul National University, Seoul, 08826, Republic of Korea
- School of Chemical and Biological Engineering, Institute of Engineering Research, Research Institute of Advanced Materials, Soft Foundry, Seoul National University, Seoul, 08826, Republic of Korea
| |
Collapse
|
25
|
Turino M, Carbó-Argibay E, Correa-Duarte M, Guerrini L, Pazos-Perez N, Alvarez-Puebla RA. Design and fabrication of bimetallic plasmonic colloids through cold nanowelding. NANOSCALE 2022; 14:9439-9447. [PMID: 35735102 DOI: 10.1039/d2nr02092k] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
The integration of Au and Ag into nanoalloys has emerged as an intriguing strategy to further tailor and boost the plasmonic properties of optical substrates. Conventional approaches for fabricating these materials via chemical reductions of metal salts in solution suffer from some limitations, such as the possibility of retaining the original morphology of the monometallic substrate. Spontaneous nanowelding at room temperature has emerged as an alternative route to tailor Au/Ag nanomaterials. Herein, we perform a thorough study on the cold-welding process of silver nanoparticles onto gold substrates to gain a better understanding of the role of different variables in enabling the formation of well-defined bimetallic structures that retain the original gold substrate morphology. To this end, we systematically varied the size of silver nanoparticles, dimensions and geometries of gold substrates, solvent polarity and structural nature of the polymeric coating. A wide range of optical and microscopy techniques have been used to provide a complementary and detailed description of the nanowelding process. We believe this extensive study will provide valuable insights into the optimal design and engineering of bimetallic plasmonic Ag/Au structures for application in nanodevices.
Collapse
Affiliation(s)
- Mariacristina Turino
- Department of Physical and Inorganic Chemistry, Universitat Rovira i Virgili, Carrer de Marcel lí Domingo s/n, 43007 Tarragona, Spain.
| | - Enrique Carbó-Argibay
- International Iberian Nanotechnology Laboratory (INL), Avenida Mestre José Veiga s/n, 4715-330, Braga, Portugal
| | | | - Luca Guerrini
- Department of Physical and Inorganic Chemistry, Universitat Rovira i Virgili, Carrer de Marcel lí Domingo s/n, 43007 Tarragona, Spain.
| | - Nicolas Pazos-Perez
- Department of Physical and Inorganic Chemistry, Universitat Rovira i Virgili, Carrer de Marcel lí Domingo s/n, 43007 Tarragona, Spain.
| | - Ramon A Alvarez-Puebla
- Department of Physical and Inorganic Chemistry, Universitat Rovira i Virgili, Carrer de Marcel lí Domingo s/n, 43007 Tarragona, Spain.
- ICREA, Passeig Lluís Companys 23, 08010 Barcelona, Spain
| |
Collapse
|
26
|
Electrochemical Redox In-Situ Welding of Silver Nanowire Films with High Transparency and Conductivity. INORGANICS 2022. [DOI: 10.3390/inorganics10070092] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/27/2023] Open
Abstract
Silver nanowire (AgNW) networks with high transparency and conductivity are crucial to developing transparent conductive films (TCFs) for flexible optoelectronic devices. However, AgNW-based TCFs still suffer from the high contact resistance of AgNW junctions with both the in-plane and out-of-plane charge transport barrier. Herein, we report a rapid and green electrochemical redox strategy to in-situ weld AgNW networks for the enhanced conductivity and mechanical durability of TCFs with constant transparency. The welded TCFs show a marked decrease of the sheet resistance (reduced to 45.5% of initial values on average) with high transmittance of 97.02% at 550 nm (deducting the background of substrates). The electrochemical welding treatment enables the removal of the residual polyvinylpyrrolidone layer and the in-situ formation of Ag solder in the oxidation and reduction processes, respectively. Furthermore, local conductivity studies confirm the improvement of both the in-plane and the out-of-plane charge transport by conductive atomic force microscopy. This proposed electrochemical redox method provides new insights on the welding of AgNW-based TCFs with high transparency and low resistance for the development of next-generation flexible optoelectronic devices. Furthermore, such conductive films based on the interconnected AgNW networks can be acted as an ideal supporter to construct heterogeneous structures with other functional materials for wide applications in photocatalysis and electrocatalysis.
Collapse
|
27
|
Wang L, Feng Y, Li Z, Liu G. Nanoscale thermoplasmonic welding. iScience 2022; 25:104422. [PMID: 35663015 PMCID: PMC9156941 DOI: 10.1016/j.isci.2022.104422] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/27/2022] Open
Abstract
Establishing direct, close contact between individual nano-objects is crucial to fabricating hierarchical and multifunctional nanostructures. Nanowelding is a technical prerequisite for successfully manufacturing such structures. In this paper, we review the nanoscale thermoplasmonic welding with a focus on its physical mechanisms, key influencing factor, and emerging applications. The basic mechanisms are firstly described from the photothermal conversion to self-limited heating physics. Key aspects related to the welding process including material scrutinization, nanoparticle geometric and spatial configuration, heating scheme and performance characterization are then discussed in terms of the distinctive properties of plasmonic welding. Based on the characteristics of high precision and flexible platform of thermoplasmonic welding, the potential applications are further highlighted from electronics and optics to additive manufacturing. Finally, the future challenges and prospects are outlined for future prospects of this dynamic field. This work summarizes these innovative concepts and works on thermoplasmonic welding, which is significant to establish a common link between nanoscale welding and additive manufacturing communities.
Collapse
Affiliation(s)
- Lin Wang
- Beijing Key Laboratory of Multiphase Flow and Heat Transfer for Low Grade Energy Utilization, North China Electric Power University, Beijing 102206, China
| | - Yijun Feng
- Beijing Key Laboratory of Multiphase Flow and Heat Transfer for Low Grade Energy Utilization, North China Electric Power University, Beijing 102206, China
| | - Ze Li
- Beijing Key Laboratory of Multiphase Flow and Heat Transfer for Low Grade Energy Utilization, North China Electric Power University, Beijing 102206, China
| | - Guohua Liu
- Beijing Key Laboratory of Multiphase Flow and Heat Transfer for Low Grade Energy Utilization, North China Electric Power University, Beijing 102206, China
| |
Collapse
|
28
|
Liu Y, Xu X, Wei Y, Chen Y, Gao M, Zhang Z, Si C, Li H, Ji X, Liang J. Tailoring Silver Nanowire Nanocomposite Interfaces to Achieve Superior Stretchability, Durability, and Stability in Transparent Conductors. NANO LETTERS 2022; 22:3784-3792. [PMID: 35486490 DOI: 10.1021/acs.nanolett.2c00876] [Citation(s) in RCA: 19] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Silver nanowires (AgNWs) have been considered as a promising candidate for transparent stretchable conductors (TSCs). However, the strong interface mismatch of stiff AgNWs and elastic substrates leads to the stress concentration at their interface and ultimately the low stretchability and poor durability of TSCs. Here, to address the interfacial mismatch of AgNWs-based TSCs we put forward a universal interface tailoring strategy that introduces the mercapto compound as the intermediate cross-linked layer. The mercapto compound strongly interacts with the AgNWs, forming a dense protective layer on their surface to improve their corrosion resistance, and reacts with the polymer substrate, forming a buffer layer to release the concentrated stress. As a result, the optimized TSCs showed superior stretchability (160%), exceptional durability (230 000 cycles), competent optoelectrical performance (18.0 ohm·sq-1 with a transmittance of 86.5%), and prominent stability. This work provides clear guidance and a strong impetus for the development of transparent stretchable electronics.
Collapse
Affiliation(s)
- Yang Liu
- College of Light Industry Science and Engineering, Tianjin University of Science and Technology, Tianjin 300457, P.R. China
| | - Xin Xu
- College of Light Industry Science and Engineering, Tianjin University of Science and Technology, Tianjin 300457, P.R. China
| | - Yu Wei
- College of Light Industry Science and Engineering, Tianjin University of Science and Technology, Tianjin 300457, P.R. China
| | - Yongsong Chen
- College of Light Industry Science and Engineering, Tianjin University of Science and Technology, Tianjin 300457, P.R. China
| | - Meng Gao
- College of Light Industry Science and Engineering, Tianjin University of Science and Technology, Tianjin 300457, P.R. China
| | - Zhengjian Zhang
- College of Light Industry Science and Engineering, Tianjin University of Science and Technology, Tianjin 300457, P.R. China
| | - Chuanling Si
- College of Light Industry Science and Engineering, Tianjin University of Science and Technology, Tianjin 300457, P.R. China
| | - Hongpeng Li
- College of Mechanical Engineering, Yangzhou University, Yangzhou 225127, P.R. China
| | - Xinyi Ji
- School of Materials Science and Engineering National Institute for Advanced Materials, Nankai University, Tianjin 300350, P.R. China
| | - Jiajie Liang
- School of Materials Science and Engineering National Institute for Advanced Materials, Nankai University, Tianjin 300350, P.R. China
- Key Laboratory of Functional Polymer Materials of Ministry of Education College of Chemistry, Nankai University, Tianjin 300350, P.R. China
| |
Collapse
|
29
|
Nguyen VH, Papanastasiou DT, Resende J, Bardet L, Sannicolo T, Jiménez C, Muñoz-Rojas D, Nguyen ND, Bellet D. Advances in Flexible Metallic Transparent Electrodes. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2022; 18:e2106006. [PMID: 35195360 DOI: 10.1002/smll.202106006] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/01/2021] [Revised: 12/24/2021] [Indexed: 06/14/2023]
Abstract
Transparent electrodes (TEs) are pivotal components in many modern devices such as solar cells, light-emitting diodes, touch screens, wearable electronic devices, smart windows, and transparent heaters. Recently, the high demand for flexibility and low cost in TEs requires a new class of transparent conductive materials (TCMs), serving as substitutes for the conventional indium tin oxide (ITO). So far, ITO has been the most used TCM despite its brittleness and high cost. Among the different emerging alternative materials to ITO, metallic nanomaterials have received much interest due to their remarkable optical-electrical properties, low cost, ease of manufacturing, flexibility, and widespread applicability. These involve metal grids, thin oxide/metal/oxide multilayers, metal nanowire percolating networks, or nanocomposites based on metallic nanostructures. In this review, a comparison between TCMs based on metallic nanomaterials and other TCM technologies is discussed. Next, the different types of metal-based TCMs developed so far and the fabrication technologies used are presented. Then, the challenges that these TCMs face toward integration in functional devices are discussed. Finally, the various fields in which metal-based TCMs have been successfully applied, as well as emerging and potential applications, are summarized.
Collapse
Affiliation(s)
- Viet Huong Nguyen
- Faculty of Materials Science and Engineering, Phenikaa University, Hanoi, 12116, Viet Nam
| | | | - Joao Resende
- AlmaScience Colab, Madan Parque, Caparica, 2829-516, Portugal
| | - Laetitia Bardet
- Université Grenoble Alpes, CNRS, Grenoble INP, LMGP, Grenoble, F-38016, France
| | - Thomas Sannicolo
- Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| | - Carmen Jiménez
- Université Grenoble Alpes, CNRS, Grenoble INP, LMGP, Grenoble, F-38016, France
| | - David Muñoz-Rojas
- Université Grenoble Alpes, CNRS, Grenoble INP, LMGP, Grenoble, F-38016, France
| | - Ngoc Duy Nguyen
- Département de Physique, CESAM/Q-MAT, SPIN, Université de Liège, Liège, B-4000, Belgium
| | - Daniel Bellet
- Université Grenoble Alpes, CNRS, Grenoble INP, LMGP, Grenoble, F-38016, France
| |
Collapse
|
30
|
Xu Y, Lin Z, Wei W, Hao Y, Liu S, Ouyang J, Chang J. Recent Progress of Electrode Materials for Flexible Perovskite Solar Cells. NANO-MICRO LETTERS 2022; 14:117. [PMID: 35488940 PMCID: PMC9056588 DOI: 10.1007/s40820-022-00859-9] [Citation(s) in RCA: 23] [Impact Index Per Article: 11.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/15/2022] [Accepted: 03/30/2022] [Indexed: 05/21/2023]
Abstract
Flexible perovskite solar cells (FPSCs) have attracted enormous interest in wearable and portable electronics due to their high power-per-weight and low cost. Flexible and efficient perovskite solar cells require the development of flexible electrodes compatible with the optoelectronic properties of perovskite. In this review, the recent progress of flexible electrodes used in FPSCs is comprehensively reviewed. The major features of flexible transparent electrodes, including transparent conductive oxides, conductive polymer, carbon nanomaterials and nanostructured metallic materials are systematically compared. And the corresponding modification strategies and device performance are summarized. Moreover, flexible opaque electrodes including metal films, opaque carbon materials and metal foils are critically assessed. Finally, the development directions and difficulties of flexible electrodes are given.
Collapse
Affiliation(s)
- Yumeng Xu
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology, School of Microelectronics, Xidian University, 2 South Taibai Road, Xi'an, 710071, People's Republic of China
| | - Zhenhua Lin
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology, School of Microelectronics, Xidian University, 2 South Taibai Road, Xi'an, 710071, People's Republic of China.
| | - Wei Wei
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology, School of Microelectronics, Xidian University, 2 South Taibai Road, Xi'an, 710071, People's Republic of China
| | - Yue Hao
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology, School of Microelectronics, Xidian University, 2 South Taibai Road, Xi'an, 710071, People's Republic of China
| | - Shengzhong Liu
- Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, Institute for Advanced Energy Materials, School of Materials Science and Engineering, Shaanxi Normal University, Xi'an, 710119, People's Republic of China
| | - Jianyong Ouyang
- Department of Materials Science and Engineering, National University of Singapore, 7 Engineering Drive 1, Singapore, 117574, Singapore
| | - Jingjing Chang
- State Key Discipline Laboratory of Wide Band Gap Semiconductor Technology, School of Microelectronics, Xidian University, 2 South Taibai Road, Xi'an, 710071, People's Republic of China.
- Advanced Interdisciplinary Research Center for Flexible Electronics, Xidian University, 2 South Taibai Road, Xi'an, 710071, People's Republic of China.
| |
Collapse
|
31
|
Xue R, Liu Y, Ning L, Yu Z, Jia X, Wang R, Qiu H, Xu Y, Li Z, Liu G, Wang C. Fabrication of Flexible Electrochromic Devices with Degradable and Fully Recyclable Features. ACS Biomater Sci Eng 2022; 8:1320-1328. [DOI: 10.1021/acsbiomaterials.2c00106] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Affiliation(s)
- Rong Xue
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Wude Road, Weiyang District, Xi’an 710021, Shaanxi, P. R. China
| | - Yu Liu
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Wude Road, Weiyang District, Xi’an 710021, Shaanxi, P. R. China
| | - Lulu Ning
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Wude Road, Weiyang District, Xi’an 710021, Shaanxi, P. R. China
| | - Zhihan Yu
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Wude Road, Weiyang District, Xi’an 710021, Shaanxi, P. R. China
| | - Xinyu Jia
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Wude Road, Weiyang District, Xi’an 710021, Shaanxi, P. R. China
| | - Ruihua Wang
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Wude Road, Weiyang District, Xi’an 710021, Shaanxi, P. R. China
| | - Hongjin Qiu
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Wude Road, Weiyang District, Xi’an 710021, Shaanxi, P. R. China
| | - Ying Xu
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Wude Road, Weiyang District, Xi’an 710021, Shaanxi, P. R. China
| | - Zhijian Li
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Wude Road, Weiyang District, Xi’an 710021, Shaanxi, P. R. China
| | - Guodong Liu
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Wude Road, Weiyang District, Xi’an 710021, Shaanxi, P. R. China
| | - Chaoli Wang
- Department of Pharmacy, Air Force Medical University, No.169 Changle West Road, Xi’an 710032, Shaanxi, P. R. China
| |
Collapse
|
32
|
Lee S, Guo LJ. Bioinspired Toughening Mechanisms in a Multilayer Transparent Conductor Structure. ACS APPLIED MATERIALS & INTERFACES 2022; 14:7440-7449. [PMID: 35080866 DOI: 10.1021/acsami.1c21923] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
With increasing demands and interest in flexible and foldable devices, much effort has been devoted to the development of flexible transparent electrodes. An in-depth understanding of failure mechanisms in nanoscale structure is crucial in developing stable, flexible electronics with long-term durability. The present work investigated the mechanoelectric characteristics of transparent conductive electrodes in the form of dielectric/metal/dielectric (DMD) sandwich structures under bending, including one time and repeated cyclic bending test, and provides an explanation of their failure mechanism. We demonstrate how a thin metallic layer helps to enhance the mechanical robustness of the DMD as compared with that without, tune the mechanical properties of the cohesive layer, and improve the electrode fracture resistance. Abnormal crack propagation and toughening of multilayer DMD structures are analyzed, and its underlying mechanisms are explained. We consider the knowledge of the failure mechanisms of transparent conductive electrodes gained from the present study as a foundation for future design improvements.
Collapse
|
33
|
Kumar A, Shaikh MO, Kumar RKR, Dutt K, Pan CT, Chuang CH. Highly sensitive, flexible and biocompatible temperature sensor utilizing ultra-long Au@AgNW-based polymeric nanocomposites. NANOSCALE 2022; 14:1742-1754. [PMID: 35014657 DOI: 10.1039/d1nr05068k] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Owing to their excellent sensitivity, stretchability, flexibility and conductivity, polymeric nanocomposites with conductive fillers have shown promise for a wide range of applications in bioelectronics and wearable devices. Herein, we report on the development of a flexible and biocompatible polymeric nanocomposite comprising ultra-long Ag-Au core-sheath nanowires (Au@AgNWs) dispersed in elastomeric media to fabricate a high-resolution wearable temperature sensor. Ultra-long AgNWs with an aspect ratio of about 1500 were synthesized using a Ca2+ ion-mediated facile one-pot polyol process. To enhance the biocompatibility and anti-oxidative property of the AgNWs, a 10-20 nm gold (Au) layer was conformably deposited without affecting the original nanowire morphology. The core-sheath structure of Au@AgNWs was characterized using HRTEM and EDS elemental mapping while the biocompatibility and anti-oxidative properties were tested using hydrogen peroxide (H2O2) etching in solution phase. Finally, the fabricated nanowires were used to prepare the Au@AgNW-poly-ethylene glycol (PEG)-polyurethane (PU)-based nanocomposite ink which can be printed on interdigitated electrodes to fabricate a thermoresistive temperature sensor with negative temperature coefficient (NTC) of resistance and quick response time (<100 s). The Au@AgNW-PEG-PU nanocomposite was characterized in detail and a novel temperature sensing mechanism based on controlling the internanowire distance of the PEG coated Au@AgNWs percolation by means of capillarity force among the nanowires as a result of the glass transition temperature of thermosensitive PEG was demonstrated. The proposed printable temperature sensor is flexible and biocompatible and shows promise for a range of wearable applications.
Collapse
Affiliation(s)
- Amit Kumar
- Institute of Medical Science and Technology, National Sun Yat-sen University, Kaohsiung 80424, Taiwan.
| | - Muhammad Omar Shaikh
- Sustainability Science and Engineering Program, Tunghai University, Taichung 407224, Taiwan
| | - R K Rakesh Kumar
- Institute of Medical Science and Technology, National Sun Yat-sen University, Kaohsiung 80424, Taiwan.
| | - Karishma Dutt
- Department of Mechanical and Electro-Mechanical Engineering, National Sun Yat-sen University, Kaohsiung 80424, Taiwan
| | - Cheng-Tang Pan
- Department of Mechanical and Electro-Mechanical Engineering, National Sun Yat-sen University, Kaohsiung 80424, Taiwan
| | - Cheng-Hsin Chuang
- Institute of Medical Science and Technology, National Sun Yat-sen University, Kaohsiung 80424, Taiwan.
| |
Collapse
|
34
|
Mu H, Huang X, Wang W, Tian X, An Z, Wang G. High-Performance-Integrated Stretchable Supercapacitors Based on a Polyurethane Organo/Hydrogel Electrolyte. ACS APPLIED MATERIALS & INTERFACES 2022; 14:622-632. [PMID: 34928149 DOI: 10.1021/acsami.1c17186] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Stretchable supercapacitors (SSCs) are promising energy storage devices for emerging wearable electronics. However, the low-energy density and poor deformation performance are still a challenge. Herein, an amphiphilic polyurethane-based organo/hydrogel electrolyte (APUGE) with a H2O/AN-in-salt (H2O/AN-NaClO4) is prepared for the first time. The as-prepared APUGE shows a wide voltage window (∼2.3 V), good adhesion, and excellent resilience. In addition, the intrinsically stretchable electrodes are prepared by coating the activated carbon slurry onto the PU/carbon black/MWCNT conductive elastic substrate. Based on the strong interface adhesion of the PU matrix, the as-assembled SSC delivers high-energy density (5.65 mW h cm-3 when the power density is 0.0256 W cm-3) and excellent deformation stability with 94.5% capacitance retention after 500 stretching cycles at 100% strain. This fully integrated construction concept is expected to be extended to multisystem stretchable metal ion batteries, stretchable lithium-sulfur batteries, and other stretchable energy storage devices.
Collapse
Affiliation(s)
- Hongchun Mu
- Shanghai Engineering Research Center of Hierarchical Nanomaterials, Shanghai Key Laboratory of Advanced Polymeric Materials, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, P. R. China
| | - Xinming Huang
- Shanghai Engineering Research Center of Hierarchical Nanomaterials, Shanghai Key Laboratory of Advanced Polymeric Materials, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, P. R. China
| | - Wenqiang Wang
- Shanghai Engineering Research Center of Hierarchical Nanomaterials, Shanghai Key Laboratory of Advanced Polymeric Materials, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, P. R. China
| | - Xiaohui Tian
- Shanghai Engineering Research Center of Hierarchical Nanomaterials, Shanghai Key Laboratory of Advanced Polymeric Materials, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, P. R. China
| | - Zhongxun An
- Shanghai Aowei Technology Development Co., Limited, Shanghai 201203, P. R. China
| | - Gengchao Wang
- Shanghai Engineering Research Center of Hierarchical Nanomaterials, Shanghai Key Laboratory of Advanced Polymeric Materials, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200237, P. R. China
| |
Collapse
|
35
|
Chen JW, Yang S, Li CH, Huang YY, Chen CH, Yang CC. Mesh size control in forming an Ag/AgO nano-network structure for transparent conducting application. NANOTECHNOLOGY 2022; 33:135201. [PMID: 34905734 DOI: 10.1088/1361-6528/ac4305] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/02/2021] [Accepted: 12/14/2021] [Indexed: 06/14/2023]
Abstract
The variation behaviors of the morphology, transmission, and sheet resistance of the surface Ag/AgO nano-network (NNW) structures fabricated under different illumination conditions and with different Ag deposition thicknesses and thermal annealing temperatures in forming initial Ag nanoparticles (NPs) are studied. Generally, an NNW structure with a smaller mesh size or a denser branch distribution has a lower transmission and a lower sheet resistance level. Under the fabrication condition of a broader illumination spectrum, a lower thermal annealing temperature, or a thicker Ag deposition, we can obtain an NNW structure of a smaller mesh size. The mesh size of an NNW structure is basically controlled by the seed density of Brownian tree (BT) at the beginning of light illumination. A BT seed can be formed through a stronger local localized surface plasmon resonance for accelerating Ag oxidation in a certain region. Once an Ag/AgO BT seed is formed, the surrounding Ag NPs are reorganized to form the branches of a BT. Multiple BTs are connected to form a large-area NNW structure, which can serve as a transparent conductor. Under the fabrication conditions of a broader illumination spectrum, 3 nm Ag deposition, and 100 °C thermal annealing, we can implement an NNW structure to achieve ∼1.15μm in mesh size, ∼90 Ω sq-1in sheet resistance, and 93%-77% in transmittance within the wavelength range between 370 and 700 nm.
Collapse
Affiliation(s)
- Jia-Wei Chen
- Institute of Photonics and Optoelectronics, and Department of Electrical Engineering, National Taiwan University, No. 1, Section 4, Roosevelt Road, Taipei 10617, Taiwan
| | - Shaobo Yang
- Institute of Photonics and Optoelectronics, and Department of Electrical Engineering, National Taiwan University, No. 1, Section 4, Roosevelt Road, Taipei 10617, Taiwan
| | - Chia-Hao Li
- Institute of Photonics and Optoelectronics, and Department of Electrical Engineering, National Taiwan University, No. 1, Section 4, Roosevelt Road, Taipei 10617, Taiwan
| | - Yang-Yi Huang
- Institute of Photonics and Optoelectronics, and Department of Electrical Engineering, National Taiwan University, No. 1, Section 4, Roosevelt Road, Taipei 10617, Taiwan
| | - Chen-Hua Chen
- Institute of Photonics and Optoelectronics, and Department of Electrical Engineering, National Taiwan University, No. 1, Section 4, Roosevelt Road, Taipei 10617, Taiwan
| | - C C Yang
- Institute of Photonics and Optoelectronics, and Department of Electrical Engineering, National Taiwan University, No. 1, Section 4, Roosevelt Road, Taipei 10617, Taiwan
| |
Collapse
|
36
|
Cho KW, Sunwoo SH, Hong YJ, Koo JH, Kim JH, Baik S, Hyeon T, Kim DH. Soft Bioelectronics Based on Nanomaterials. Chem Rev 2021; 122:5068-5143. [PMID: 34962131 DOI: 10.1021/acs.chemrev.1c00531] [Citation(s) in RCA: 35] [Impact Index Per Article: 11.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
Recent advances in nanostructured materials and unconventional device designs have transformed the bioelectronics from a rigid and bulky form into a soft and ultrathin form and brought enormous advantages to the bioelectronics. For example, mechanical deformability of the soft bioelectronics and thus its conformal contact onto soft curved organs such as brain, heart, and skin have allowed researchers to measure high-quality biosignals, deliver real-time feedback treatments, and lower long-term side-effects in vivo. Here, we review various materials, fabrication methods, and device strategies for flexible and stretchable electronics, especially focusing on soft biointegrated electronics using nanomaterials and their composites. First, we summarize top-down material processing and bottom-up synthesis methods of various nanomaterials. Next, we discuss state-of-the-art technologies for intrinsically stretchable nanocomposites composed of nanostructured materials incorporated in elastomers or hydrogels. We also briefly discuss unconventional device design strategies for soft bioelectronics. Then individual device components for soft bioelectronics, such as biosensing, data storage, display, therapeutic stimulation, and power supply devices, are introduced. Afterward, representative application examples of the soft bioelectronics are described. A brief summary with a discussion on remaining challenges concludes the review.
Collapse
Affiliation(s)
- Kyoung Won Cho
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,Interdisciplinary Program for Bioengineering, Seoul National University, Seoul 08826, Republic of Korea
| | - Sung-Hyuk Sunwoo
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,School of Chemical and Biological Engineering, Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea
| | - Yongseok Joseph Hong
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,School of Chemical and Biological Engineering, Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea
| | - Ja Hoon Koo
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea
| | - Jeong Hyun Kim
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea
| | - Seungmin Baik
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,School of Chemical and Biological Engineering, Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea
| | - Taeghwan Hyeon
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,Interdisciplinary Program for Bioengineering, Seoul National University, Seoul 08826, Republic of Korea.,School of Chemical and Biological Engineering, Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea
| | - Dae-Hyeong Kim
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,Interdisciplinary Program for Bioengineering, Seoul National University, Seoul 08826, Republic of Korea.,School of Chemical and Biological Engineering, Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea.,Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea
| |
Collapse
|
37
|
High-Stability Silver Nanowire-Al 2O 3 Composite Flexible Transparent Electrodes Prepared by Electrodeposition. NANOMATERIALS 2021; 11:nano11113047. [PMID: 34835811 PMCID: PMC8621956 DOI: 10.3390/nano11113047] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/30/2021] [Revised: 11/08/2021] [Accepted: 11/09/2021] [Indexed: 11/17/2022]
Abstract
Silver nanowire (AgNW) conductive film fabricated by solution processing was investigated as an alternative to indium tin oxide (ITO) in flexible transparent electrodes. In this paper, we studied a facile and effective method by electrodepositing Al2O3 on the surface of AgNWs. As a result, flexible transparent electrodes with improved stability could be obtained by electrodepositing Al2O3. It was found that, as the annealing temperature rises, the Al2O3 coating layer can be transformed from Al2O3·H2O into a denser amorphous state at 150 °C. By studying the increase of electrodeposition temperature, it was observed that the transmittance of the AgNW-Al2O3 composite films first rose to the maximum at 70 °C and then decreased. With the increase of the electrodeposition time, the figure of merit (FoM) of the composite films increased and reached the maximum when the time was 40 s. Through optimizing the experimental parameters, a high-stability AgNW flexible transparent electrode using polyimide (PI) as a substrate was prepared without sacrificing optical and electrical performance by electrodepositing at -1.1 V and 70 °C for 40 s with 0.1 mol/L Al(NO3)3 as the electrolyte, which can withstand a high temperature of 250 °C or 250,000 bending cycles with a bending radius of 4 mm.
Collapse
|
38
|
Bardet L, Papanastasiou DT, Crivello C, Akbari M, Resende J, Sekkat A, Sanchez-Velasquez C, Rapenne L, Jiménez C, Muñoz-Rojas D, Denneulin A, Bellet D. Silver Nanowire Networks: Ways to Enhance Their Physical Properties and Stability. NANOMATERIALS (BASEL, SWITZERLAND) 2021; 11:2785. [PMID: 34835550 PMCID: PMC8625099 DOI: 10.3390/nano11112785] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/17/2021] [Revised: 10/17/2021] [Accepted: 10/18/2021] [Indexed: 01/02/2023]
Abstract
Silver nanowire (AgNW) networks have been intensively investigated in recent years. Thanks to their attractive physical properties in terms of optical transparency and electrical conductivity, as well as their mechanical performance, AgNW networks are promising transparent electrodes (TE) for several devices, such as solar cells, transparent heaters, touch screens or light-emitting devices. However, morphological instabilities, low adhesion to the substrate, surface roughness and ageing issues may limit their broader use and need to be tackled for a successful performance and long working lifetime. The aim of the present work is to highlight efficient strategies to optimize the physical properties of AgNW networks. In order to situate our work in relation to existing literature, we briefly reported recent studies which investigated physical properties of AgNW networks. First, we investigated the optimization of optical transparency and electrical conductivity by comparing two types of AgNWs with different morphologies, including PVP layer and AgNW dimensions. In addition, their response to thermal treatment was deeply investigated. Then, zinc oxide (ZnO) and tin oxide (SnO2) protective films deposited by Atmospheric Pressure Spatial Atomic Layer Deposition (AP-SALD) were compared for one type of AgNW. We clearly demonstrated that coating AgNW networks with these thin oxide layers is an efficient approach to enhance the morphological stability of AgNWs when subjected to thermal stress. Finally, we discussed the main future challenges linked with AgNW networks optimization processes.
Collapse
Affiliation(s)
- Laetitia Bardet
- Univ. Grenoble Alpes, CNRS, Grenoble INP, LGP2, F-38000 Grenoble, France;
- Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, F-38000 Grenoble, France; (D.T.P.); (C.C.); (M.A.); (A.S.); (C.S.-V.); (L.R.); (C.J.); (D.M.-R.)
| | - Dorina T. Papanastasiou
- Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, F-38000 Grenoble, France; (D.T.P.); (C.C.); (M.A.); (A.S.); (C.S.-V.); (L.R.); (C.J.); (D.M.-R.)
| | - Chiara Crivello
- Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, F-38000 Grenoble, France; (D.T.P.); (C.C.); (M.A.); (A.S.); (C.S.-V.); (L.R.); (C.J.); (D.M.-R.)
| | - Masoud Akbari
- Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, F-38000 Grenoble, France; (D.T.P.); (C.C.); (M.A.); (A.S.); (C.S.-V.); (L.R.); (C.J.); (D.M.-R.)
| | - João Resende
- AlmaScience Colab, Madan Parque, 2829-516 Caparica, Portugal;
| | - Abderrahime Sekkat
- Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, F-38000 Grenoble, France; (D.T.P.); (C.C.); (M.A.); (A.S.); (C.S.-V.); (L.R.); (C.J.); (D.M.-R.)
| | - Camilo Sanchez-Velasquez
- Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, F-38000 Grenoble, France; (D.T.P.); (C.C.); (M.A.); (A.S.); (C.S.-V.); (L.R.); (C.J.); (D.M.-R.)
| | - Laetitia Rapenne
- Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, F-38000 Grenoble, France; (D.T.P.); (C.C.); (M.A.); (A.S.); (C.S.-V.); (L.R.); (C.J.); (D.M.-R.)
| | - Carmen Jiménez
- Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, F-38000 Grenoble, France; (D.T.P.); (C.C.); (M.A.); (A.S.); (C.S.-V.); (L.R.); (C.J.); (D.M.-R.)
| | - David Muñoz-Rojas
- Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, F-38000 Grenoble, France; (D.T.P.); (C.C.); (M.A.); (A.S.); (C.S.-V.); (L.R.); (C.J.); (D.M.-R.)
| | - Aurore Denneulin
- Univ. Grenoble Alpes, CNRS, Grenoble INP, LGP2, F-38000 Grenoble, France;
| | - Daniel Bellet
- Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, F-38000 Grenoble, France; (D.T.P.); (C.C.); (M.A.); (A.S.); (C.S.-V.); (L.R.); (C.J.); (D.M.-R.)
| |
Collapse
|
39
|
Li P, Kang Z, Rao F, Lu Y, Zhang Y. Nanowelding in Whole-Lifetime Bottom-Up Manufacturing: From Assembly to Service. SMALL METHODS 2021; 5:e2100654. [PMID: 34927947 DOI: 10.1002/smtd.202100654] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/16/2021] [Revised: 07/23/2021] [Indexed: 06/14/2023]
Abstract
The continuous miniaturization of microelectronics is pushing the transformation of nanomanufacturing modes from top-down to bottom-up. Bottom-up manufacturing is essentially the way of assembling nanostructures from atoms, clusters, quantum dots, etc. The assembly process relies on nanowelding which also existed in the synthesis process of nanostructures, construction and repair of nanonetworks, interconnects, integrated circuits, and nanodevices. First, many kinds of novel nanomaterials and nanostructures from 0D to 1D, and even 2D are synthesized by nanowelding. Second, the connection of nanostructures and interfaces between metal/semiconductor-metal/semiconductor is realized through low-temperature heat-assisted nanowelding, mechanical-assisted nanowelding, or cold welding. Finally, 2D and 3D interconnects, flexible transparent electrodes, integrated circuits, and nanodevices are constructed, functioned, or self-healed by nanowelding. All of the three nanomanufacturing stages follow the rule of "oriented attachment" mechanisms. Thus, the whole-lifetime bottom-up manufacturing process from the synthesis and connection of nanostructures to the construction and service of nanodevices can be organically integrated by nanowelding. The authors hope this review can bring some new perspective in future semiconductor industrialization development in the expansion of multi-material systems, technology pathway for the refined design, controlled synthesis and in situ characterization of complex nanostructures, and the strategies to develop and repair novel nanodevices in service.
Collapse
Affiliation(s)
- Peifeng Li
- College of Materials Science and Engineering, Shenzhen University, Shenzhen, 518060, P. R. China
| | - Zhuo Kang
- Beijing Advanced Innovation Center for Materials Genome Engineering, Beijing Key Laboratory for Advanced Energy Materials and Technologies, University of Science and Technology Beijing, Beijing, 100083, P. R. China
- State Key Laboratory for Advanced Metals and Materials, School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing, 100083, P. R. China
| | - Feng Rao
- College of Materials Science and Engineering, Shenzhen University, Shenzhen, 518060, P. R. China
| | - Yang Lu
- Department of Mechanical Engineering, City University of Hong Kong, Kowloon, Hong Kong, 999077, P. R. China
- Nanomanufacturing Laboratory (NML), Shenzhen Research Institute, City University of Hong Kong, Shenzhen, 518057, P. R. China
| | - Yue Zhang
- Beijing Advanced Innovation Center for Materials Genome Engineering, Beijing Key Laboratory for Advanced Energy Materials and Technologies, University of Science and Technology Beijing, Beijing, 100083, P. R. China
- State Key Laboratory for Advanced Metals and Materials, School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing, 100083, P. R. China
| |
Collapse
|
40
|
Wang G, Hao L, Zhang X, Tan S, Zhou M, Gu W, Ji G. Flexible and transparent silver nanowires/biopolymer film for high-efficient electromagnetic interference shielding. J Colloid Interface Sci 2021; 607:89-99. [PMID: 34492357 DOI: 10.1016/j.jcis.2021.08.190] [Citation(s) in RCA: 23] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/17/2021] [Revised: 08/27/2021] [Accepted: 08/28/2021] [Indexed: 11/29/2022]
Abstract
Flexible and transparent conductive films are highly desirable in some optoelectronic devices, such as smart windows, touch panels, as well as displays and electromagnetic protection field. Silver nanowire (Ag NW) has been considered as the best material to replace indium tin oxide (ITO) to fabricate flexible transparent electromagnetic interference (EMI) shielding films due to its superior comprehensive performance. However, the common substrates supporting Ag NWs require surface modification to enhance the adhesion with Ag NWs. In this work, a flexible and transparent Ag NWs EMI shielding film with sandwich structure through a facile rod-coating method, wherein Ag NWs network were embedded between biodegradable gelatin-based substrate and cover layer. The interfacial adhesion between Ag NWs and gelatin-based layers was enhanced by hydrogen-bonding interaction and swelling effect without any pretreatment. The shielding effectiveness (SE) of the G/Ag NW/G (G represents gelatin-based layer) film reaches 37.74 dB at X band with an optical transmittance of 72.0 %. What's more, the flexible gelatin-based layer and encapsulated structure endow the resultant G/Ag NW/G film integrating excellent mechanical properties, reliable durability, antioxidation, as well as anti-freezing performance. This work paves a new way for fabricating flexible transparent EMI shielding films.
Collapse
Affiliation(s)
- Gehuan Wang
- College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, PR China
| | - Lele Hao
- College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, PR China
| | - Xindan Zhang
- College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, PR China
| | - Shujuan Tan
- College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, PR China.
| | - Ming Zhou
- College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, PR China
| | - Weihua Gu
- College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, PR China
| | - Guangbin Ji
- College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, PR China.
| |
Collapse
|
41
|
Ge S, Cai Z, Zhang H, He L, Wang P, Zhang L, Fang Y. The smart growth of self-assembled silver nanoloops. NANOTECHNOLOGY 2021; 32:465604. [PMID: 34320483 DOI: 10.1088/1361-6528/ac18a3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/05/2021] [Accepted: 07/26/2021] [Indexed: 06/13/2023]
Abstract
Enclosed silver nanoloops have unique features in manipulating and controlling light. However, even the conception of their growth mechanism has not been established. The intermediate structure at the growth stage were revealed as the crucial issue for studying their smart growth mechanism of silver nanoloops and nanowires. Early growth stage showed that silver nanorods and nanoparticles were grown in their respective polyvinylpyrrolidone micelles. Then, the silver nanorods and nanoparticles were assembled in a rod-particle-rod pattern via micelle-micelle coupling, forming linear silver nanowires. These silver nanowires were attracted by Van der Waals forces forming the initial nanoloop. Notably, there was a silver nanoparticle between the ends of two adjacent nanowires. This silver nanoparticle acted like solder and played a crucial role in connecting the two adjacent nanowires; consequently, a silver nanoloop was formed. This finding also suggested that similar smart growth patterns might exist for other one-dimensional and looped nanomaterials.
Collapse
Affiliation(s)
- Shuaipeng Ge
- The Beijing Key Laboratory for Nano-photonics and Nano-structure, Department of Physics, Capital Normal University, Beijing 100048, People's Republic of China
| | - Zhixue Cai
- The Beijing Key Laboratory for Nano-photonics and Nano-structure, Department of Physics, Capital Normal University, Beijing 100048, People's Republic of China
| | - Huanhuan Zhang
- The Beijing Key Laboratory for Nano-photonics and Nano-structure, Department of Physics, Capital Normal University, Beijing 100048, People's Republic of China
| | - Lingling He
- The Beijing Key Laboratory for Nano-photonics and Nano-structure, Department of Physics, Capital Normal University, Beijing 100048, People's Republic of China
| | - Peijie Wang
- The Beijing Key Laboratory for Nano-photonics and Nano-structure, Department of Physics, Capital Normal University, Beijing 100048, People's Republic of China
| | - Lisheng Zhang
- The Beijing Key Laboratory for Nano-photonics and Nano-structure, Department of Physics, Capital Normal University, Beijing 100048, People's Republic of China
| | - Yan Fang
- The Beijing Key Laboratory for Nano-photonics and Nano-structure, Department of Physics, Capital Normal University, Beijing 100048, People's Republic of China
| |
Collapse
|
42
|
Jung D, Lim C, Shim HJ, Kim Y, Park C, Jung J, Han SI, Sunwoo SH, Cho KW, Cha GD, Kim DC, Koo JH, Kim JH, Hyeon T, Kim DH. Highly conductive and elastic nanomembrane for skin electronics. Science 2021; 373:1022-1026. [PMID: 34446604 DOI: 10.1126/science.abh4357] [Citation(s) in RCA: 100] [Impact Index Per Article: 33.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/11/2021] [Accepted: 07/23/2021] [Indexed: 12/25/2022]
Abstract
Skin electronics require stretchable conductors that satisfy metallike conductivity, high stretchability, ultrathin thickness, and facile patternability, but achieving these characteristics simultaneously is challenging. We present a float assembly method to fabricate a nanomembrane that meets all these requirements. The method enables a compact assembly of nanomaterials at the water-oil interface and their partial embedment in an ultrathin elastomer membrane, which can distribute the applied strain in the elastomer membrane and thus lead to a high elasticity even with the high loading of the nanomaterials. Furthermore, the structure allows cold welding and bilayer stacking, resulting in high conductivity. These properties are preserved even after high-resolution patterning by using photolithography. A multifunctional epidermal sensor array can be fabricated with the patterned nanomembranes.
Collapse
Affiliation(s)
- Dongjun Jung
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea
| | - Chaehong Lim
- School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea.,Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea
| | - Hyung Joon Shim
- School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea.,Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea
| | - Yeongjun Kim
- School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea.,Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea
| | - Chansul Park
- School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea.,Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea
| | - Jaebong Jung
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea
| | - Sang Ihn Han
- School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea.,Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea
| | - Sung-Hyuk Sunwoo
- School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea.,Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea
| | - Kyoung Won Cho
- School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea.,Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea
| | - Gi Doo Cha
- School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea.,Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea
| | - Dong Chan Kim
- School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea.,Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea
| | - Ja Hoon Koo
- School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea.,Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea
| | - Ji Hoon Kim
- Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea
| | - Taeghwan Hyeon
- School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea. .,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea.,Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea
| | - Dae-Hyeong Kim
- School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea. .,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea.,Center for Nanoparticle Research, Institute for Basic Science (IBS), Seoul 08826, Republic of Korea.,School of Chemical and Biological Engineering, and Institute of Chemical Processes, Seoul National University, Seoul 08826, Republic of Korea.,Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea
| |
Collapse
|
43
|
High-Performance Flexible Transparent Electrodes Fabricated via Laser Nano-Welding of Silver Nanowires. CRYSTALS 2021. [DOI: 10.3390/cryst11080996] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Silver nanowires (Ag-NWs), which possess a high aspect ratio with superior electrical conductivity and transmittance, show great promise as flexible transparent electrodes (FTEs) for future electronics. Unfortunately, the fabrication of Ag-NW conductive networks with low conductivity and high transmittance is a major challenge due to the ohmic contact resistance between Ag-NWs. Here we report a facile method of fabricating high-performance Ag-NW electrodes on flexible substrates. A 532 nm nanosecond pulsed laser is employed to nano-weld the Ag-NW junctions through the energy confinement caused by localized surface plasmon resonance, reducing the sheet resistance and connecting the junctions with the substrate. Additionally, the thermal effect of the pulsed laser on organic substrates can be ignored due to the low energy input and high transparency of the substrate. The fabricated FTEs demonstrate a high transmittance (up to 85.9%) in the visible band, a low sheet resistance of 11.3 Ω/sq, high flexibility and strong durability. The applications of FTEs to 2D materials and LEDs are also explored. The present work points toward a promising new method for fabricating high-performance FTEs for future wearable electronic and optoelectronic devices.
Collapse
|
44
|
Ma C, Liu YF, Bi YG, Zhang XL, Yin D, Feng J, Sun HB. Recent progress in post treatment of silver nanowire electrodes for optoelectronic device applications. NANOSCALE 2021; 13:12423-12437. [PMID: 34259675 DOI: 10.1039/d1nr02917g] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Owing to the economical and practical solution synthesis and coating strategies, silver nanowires (AgNWs) have been considered as one of the most suitable alternative materials to replace commercial indium tin oxide (ITO) transparent electrodes. The primitive AgNW electrode cannot meet the requirements for preparing high performance optoelectronic devices due to its high contact resistance, large surface roughness and poor stability. Thus, various post-treatments for AgNW film optimization are needed before its actual applications, such as welding treatment to decrease contact resistance and passivation to increase film stability. This review investigates recent progress on the preparation and optimization of AgNWs. Moreover, some unique fabrication strategies to produce highly oriented AgNW films with unique anisotropic properties have also been carried out with detailed analysis. The representative devices based on the AgNW electrode have been summarized and discussed at the end of this review.
Collapse
Affiliation(s)
- Chi Ma
- State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, Changchun 130012, China.
| | | | | | | | | | | | | |
Collapse
|
45
|
Chang B, Zhao D. Direct assembly of nanowires by electron beam-induced dielectrophoresis. NANOTECHNOLOGY 2021; 32:415602. [PMID: 33721856 DOI: 10.1088/1361-6528/abeeb5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/11/2021] [Accepted: 03/15/2021] [Indexed: 06/12/2023]
Abstract
Controllable self-assembly is an important tool to investigate interactions between nanoscale objects. Here we present an assembly strategy based on 3D aligned silicon nanowires. By illuminating the tips of nanowires locally by a focused electron beam, an attractive dielectrophoretic force can be induced, leading to elastic deformations and sticking between adjacent nanowires. The whole process is performed feasibly inside a vacuum environment free from capillary or hydrodynamic forces. Assembly mechanisms are discussed for nanowires in both one and two layers, and various ordered organizations are presented. With the help of moisture treatment, a hierarchical assembly can also be achieved. Notably, an unsynchronized assembly is observed in two layers of nanowires. This study helps with a better understanding of nanoscale sticking phenomena and electrostatic actuations in nanoelectromechanical systems, besides, it also provides possibilities to probe quantum effects like Casimir forces and phonon heat transport in a vacuum gap.
Collapse
Affiliation(s)
- Bingdong Chang
- DTU Nanolab, Technical University of Denmark, Ørsteds Plads, Building 347, DK-2800 Kgs. Lyngby, Denmark
| | - Ding Zhao
- Key Laboratory of 3D Micro/Nano Fabrication and Characterization of Zhejiang Province, School of Engineering, Westlake University, Hangzhou 310024, People's Republic of China
- Institute of Advanced Technology, Westlake Institute for Advanced Study, Hangzhou 310024, People's Republic of China
| |
Collapse
|
46
|
Moisture-Assisted Formation of High-Quality Silver Nanowire Transparent Conductive Films with Low Junction Resistance. COATINGS 2021. [DOI: 10.3390/coatings11060671] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
Silver nanowire (AgNWs) transparent conductive film (TCF) is considered to be the most favorable material to replace indium tin oxide (ITO) as the next-generation transparent conductive film. However, the disadvantages of AgNWs, such as easy oxidation and high wire-wire junction resistance, dramatically limit its commercial application. In this paper, moisture treatment was adopted, and water was dripped on the surface of AgNWs film or breathed on the surface so that the surface was covered with a layer of water vapor. The morphology of silver nanowire mesh nodes is complex, and the curvature is large. According to the capillary condensation theory, water molecules preferentially condense near the geometric surface with significant curvature. The capillary force is generated, making the wire-wire junction of AgNWs mesh bond tightly, resulting in good ohmic contact. The experimental results show that AgNWs-TCF treated by moisture has better conductivity, with an average sheet resistance of 20 Ω/sq and more uniform electrical properties. The bending test and adhesion test showed that AgNWs-TCF treated by moisture still exhibited good mechanical bending resistance and environmental stability.
Collapse
|
47
|
Wang P, Zhang C, Wu M, Zhang J, Ling X, Yang L. Scalable Solution-Processed Fabrication Approach for High-Performance Silver Nanowire/MXene Hybrid Transparent Conductive Films. NANOMATERIALS (BASEL, SWITZERLAND) 2021; 11:1360. [PMID: 34063882 PMCID: PMC8224074 DOI: 10.3390/nano11061360] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/23/2021] [Revised: 05/13/2021] [Accepted: 05/19/2021] [Indexed: 12/27/2022]
Abstract
The transparent conductive films (TCFs) based on silver nanowires are expected to be a next-generation electrode for flexible electronics. However, their defects such as easy oxidation and high junction resistance limit its wide application in practical situations. Herein, a method of coating Ti3C2Tx with different sizes was proposed to prepare silver nanowire/MXene composite films. The solution-processed silver nanowire (AgNW) networks were patched and welded by capillary force effect through the double-coatings of small and large MXene nanosheets. The sheet resistance of the optimized AgNW/MXene TCFs was 15.1 Ω/sq, the optical transmittance at 550 nm was 89.3%, and the figure of merit value was 214.4. Moreover, the AgNW/MXene TCF showed higher stability at 1600 mechanical bending, annealing at 100 °C for 50 h, and exposure to ambient air for 40 days. These results indicate that the novel AgNW/MXene TCFs have a great potential for high-performance flexible optoelectronic devices.
Collapse
Affiliation(s)
| | | | | | | | | | - Lianqiao Yang
- Key Laboratory of Advanced Display and System Applications, Ministry of Education, Shanghai University, Yanchang Road 149, Shanghai 200072, China; (P.W.); (C.Z.); (M.W.); (J.Z.); (X.L.)
| |
Collapse
|
48
|
Kumar A, Shaikh MO, Chuang CH. Silver Nanowire Synthesis and Strategies for Fabricating Transparent Conducting Electrodes. NANOMATERIALS (BASEL, SWITZERLAND) 2021; 11:693. [PMID: 33802059 PMCID: PMC8000035 DOI: 10.3390/nano11030693] [Citation(s) in RCA: 24] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/03/2021] [Revised: 02/27/2021] [Accepted: 03/04/2021] [Indexed: 11/16/2022]
Abstract
One-dimensional metal nanowires, with novel functionalities like electrical conductivity, optical transparency and high mechanical stiffness, have attracted widespread interest for use in applications such as transparent electrodes in optoelectronic devices and active components in nanoelectronics and nanophotonics. In particular, silver nanowires (AgNWs) have been widely researched owing to the superlative thermal and electrical conductivity of bulk silver. Herein, we present a detailed review of the synthesis of AgNWs and their utilization in fabricating improved transparent conducting electrodes (TCE). We discuss a range of AgNW synthesis protocols, including template assisted and wet chemical techniques, and their ability to control the morphology of the synthesized nanowires. Furthermore, the use of scalable and cost-effective solution deposition methods to fabricate AgNW based TCE, along with the numerous treatments used for enhancing their optoelectronic properties, are also discussed.
Collapse
Affiliation(s)
- Amit Kumar
- Institute of Medical Science and Technology, National Sun Yat-sen University, Kaohsiung 80424, Taiwan;
| | - Muhammad Omar Shaikh
- Sustainability Science and Engineering Program, Tunghai University, Taichung 407, Taiwan
| | - Cheng-Hsin Chuang
- Institute of Medical Science and Technology, National Sun Yat-sen University, Kaohsiung 80424, Taiwan;
| |
Collapse
|
49
|
Kang HS, Kim DH, Kim TW. Organic light-emitting devices based on conducting polymer treated with benzoic acid. Sci Rep 2021; 11:3885. [PMID: 33594127 PMCID: PMC7886878 DOI: 10.1038/s41598-021-82980-0] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/14/2020] [Accepted: 01/27/2021] [Indexed: 01/31/2023] Open
Abstract
We report on the enhanced conductivity of the benzoic-acid-treated poly(3,4-ethlenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) electrode for use in highly flexible, organic light-emitting devices (OLEDs). The conductivity of the benzoic-acid-treated PEDOT:PSS electrode increased from 1 to 1583.2 S/cm, in comparison with that of the pristine PEDOT:PSS electrode, due to a complex factor of the H+ mole % and the dielectric constant of the benzoic solution. Among the post-treatment methods of the PEDOT:PSS electrodes, the operating voltage at 1000 cd/m2 of OLEDs fabricated utilizing the PEDOT:PSS electrode with the benzoic acid treatment has the lowest value, and its maximum luminance is 24,400 cd/m2, which are 1.54 and 2.15 times higher than those of OLEDs using PEDOT:PSS electrodes treated with dimethyl sulfoxide and methanol, respectively. The luminance of a flexible OLED with a benzoic-acid-treated PEDOT:PSS electrode after 1400 bending cycles decreased to 83% of the initial luminance, resulting in excellent mechanical stability.
Collapse
Affiliation(s)
- Hwa Seung Kang
- Department of Information Display Engineering, Hanyang University, Seoul, 04763, Korea
| | - Dae Hun Kim
- Department of Electronics and Computer Engineering, Hanyang University, Seoul, 04763, Korea
| | - Tae Whan Kim
- Department of Information Display Engineering, Hanyang University, Seoul, 04763, Korea.
- Department of Electronics and Computer Engineering, Hanyang University, Seoul, 04763, Korea.
| |
Collapse
|
50
|
Patil JJ, Chae WH, Trebach A, Carter KJ, Lee E, Sannicolo T, Grossman JC. Failing Forward: Stability of Transparent Electrodes Based on Metal Nanowire Networks. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2004356. [PMID: 33346400 DOI: 10.1002/adma.202004356] [Citation(s) in RCA: 37] [Impact Index Per Article: 12.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/26/2020] [Revised: 08/05/2020] [Indexed: 06/12/2023]
Abstract
Metal nanowire (MNW)-based transparent electrode technologies have significantly matured over the last decade to become a prominent low-cost alternative to indium tin oxide (ITO). Beyond reaching the same level of performance as ITO, MNW networks offer additional advantages including flexibility and low materials cost. To facilitate adoption of MNW networks as a replacement to ITO, they must overcome their inherent stability issues while maintaining their properties and cost-effectiveness. Herein, the fundamental failure mechanisms of MNW networks are discussed in detail. Recent strategies to computationally model MNWs from the nano- to macroscale and suggest future work to capture dynamic failure to unravel mechanisms that account for convolution of the failure modes are highlighted. Strategies to characterize MNW network failure in situ and postmortem are also discussed. In addition, recent work about improving the stability of MNW networks via encapsulation is discussed. Lastly, a perspective is given on how to frame the requirements of MNW-encapsulant hybrids with reference to their target applications, namely: solar cells, transparent film heaters, sensors, and displays. A cost analysis to comment on the feasibility of implementing MNW hybrids is provided, and critical areas to focus on for future work on MNW networks are suggested.
Collapse
Affiliation(s)
- Jatin J Patil
- Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| | - Woo Hyun Chae
- Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| | - Adam Trebach
- Department of Physics, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| | - Ki-Jana Carter
- Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| | - Eric Lee
- Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| | - Thomas Sannicolo
- Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| | - Jeffrey C Grossman
- Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA
| |
Collapse
|