Poly(ethylene glycol)-modified phospholipids prevent aggregation during covalent conjugation of proteins to liposomes

Development and characterization of novel surface engineered Depofoam: a QbD coupled failure modes and effects analysis risk assessment-based optimization studies

This study aimed to design and develop novel surface-engineered Depofoam formulations to extend the drug delivery to the prescribed time. The objectives are to prevent the formulation from burst release, rapid clearance by tissue macrophages, and instability and to analyze the impact of process and material variables in the characteristics of formulations. This work employed a quality-by-design coupled failure modes and effects analysis (FMEA)-risk assessment strategy. The factors for the experimental designs were chosen based on the FMEA results. The formulations were prepared by the double emulsification method followed by surface modification and characterized in terms of critical quality attributes (CQAs). The experimental data for all these CQAs were validated and optimized using the Box-Behnken design. A comparative drug release experiment was studied by the modified dissolution method. Furthermore, the stability of the formulation was also assessed. In addition, the impact of critical material attributes and critical process parameters on CQAs was evaluated using FMEA risk assessment. The optimized formulation method yielded high encapsulation efficiency (86.24 ± 0.69%) and loading capacity (24.13 ± 0.54%) with an excellent zeta potential value (-35.6 ± 4.55mV). The comparative in vitro drug release studies showed that more than 90% of the drug's release time from the surface-engineered Depofoam was sustained for up to 168 h without burst release and ensured colloidal stability. These research findings revealed that Depofoam prepared with optimized formulation and operating conditions yielded stable formulation, protected the drug from burst release, provided a prolonged release, and sufficiently controlled the drug release rate.

Development of Spleen Targeting H2S Donor Loaded Liposome for the Effective Systemic Immunomodulation and Treatment of Inflammatory Bowel Disease

Nanoparticles are primarily taken up by immune cells after systemic administration. Thus, they are considered an ideal drug delivery vehicle for immunomodulation. Because the spleen is the largest lymphatic organ and regulates the systemic immune system, there have been studies to develop spleen targeting nanoparticles for immunomodulation of cancer and immunological disorders. Inflammatory bowel disease (IBD) includes disorders involving chronic inflammation in the gastrointestinal tract and is considered incurable despite a variety of treatment options. Hydrogen sulfide (H₂S) is one of the gasotransmitters that carries out anti-inflammatory functions and has shown promising immunomodulatory effects in various inflammatory diseases including IBD. Herein, we developed a delicately tuned H₂S donor delivering liposome for spleen targeting (ST-H₂S lipo) and studied its therapeutic effects in a dextran sulfate sodium (DSS) induced colitis model. We identified the ideal PEG type and ratio of liposome for a high stability, loading efficiency, and spleen targeting effect. In the treatment of the DSS-induced colitis model, we found that ST-H₂S lipo and conventional long-circulating liposomes loaded with H₂S donors (LC-H₂S lipo) reduced the severity of colitis, whereas unloaded H₂S donors did not. Furthermore, the therapeutic effect of ST-H₂S lipo was superior to that of LC-H₂S lipo due to its better systemic immunomodulatory effect than that of LC-H₂S lipo. Our findings demonstrate that spleen targeting H₂S lipo may have therapeutic potential for IBD.

PEGylated versus Non-PEGylated pH-Sensitive Liposomes: New Insights from a Comparative Antitumor Activity Study

PEGylated liposomes are largely studied as long-circulating drug delivery systems. Nevertheless, the addition of PEG can result in reduced interactions between liposomes and cells, hindering liposomal internalization into target cells. The presence of PEG on the surface of pH-sensitive liposomes is not advantageous in terms of biodistribution and tumor uptake, raising the question of whether the indiscriminate use of PEG benefits the formulation. In this study, two doxorubicin-loaded pH-sensitive liposomal formulations, PEGylated (Lip2000-DOX) or non-PEGylated (Lip-DOX), were prepared and characterized. Overall, the PEGylated and non-PEGylated liposomes showed no differences in size or morphology in Cryo-TEM image analysis. Specifically, DLS analysis showed a mean diameter of 140 nm, PDI lower than 0.2, and zeta potential close to neutrality. Both formulations showed an EP higher than 90%. With respect to drug delivery, Lip-DOX had better cellular uptake than Lip₂₀₀₀-DOX, suggesting that the presence of PEG reduced the amount of intracellular DOX accumulation. The antitumor activities of free-DOX and both liposomal formulations were evaluated in 4T1 breast tumor-bearing BALB/c mice. The results showed that Lip-DOX was more effective in controlling tumor growth than other groups, inhibiting tumor growth by 60.4%. Histological lung analysis confirmed that none of the animals in the Lip-DOX group had metastatic foci. These results support that pH-sensitive liposomes have interesting antitumor properties and may produce important outcomes without PEG.

Synthetic Liposomal Mimics of Biological Viruses for the Study of Immune Responses to Infection and Vaccination

Human viruses possess very complex supramolecular structures. Both icosahedral and enveloped viruses typically display an array of viral-encoded protein antigens at varied spatial densities on the viral particle surface. The viral nucleic acid genome, on the other hand, is encapsulated inside the viral particle. Although both the surface antigen and the interior nucleic acids could independently produce immunological responses, how B cells integrate these two types of signals and respond to a typical virus particle to initiate activation is not well understood at a molecular level. The study of these fundamental biological processes would benefit from the development of viral structural mimics that are well constructed to incorporate both quantitative and qualitative viral features for presentation to B cells. These novel tools would enable researchers to systematically dissect the underlying processes. Here we report the development of such particulate antigens based on liposomes engineered to display a model protein antigen, hen egg lysozyme (HEL). We developed methods to overexpress and purify various affinity mutants of HEL from E. coli. We conjugated the purified recombinant HEL proteins onto the surface of a virion-sized liposome in an orientation-specific manner at defined spatial densities and also encapsulated nucleic acid molecules into the interior of the liposome. Both the chemical conjugation of the HEL antigen on liposome surfaces and the encapsulation of nucleic acids were stable under physiologically relevant conditions. These liposomes elicited antigen-specific B-cell responses in vitro, which validate these supramolecular structures as a novel and effective approach to mimic and systematically isolate the role of essential viral features in directing the B-cell response to particulate antigens.

Advances of Nano-Structured Extended-Release Local Anesthetics

Extended-release local anesthetics (LAs) have drawn increasing attention with their promising role in improving analgesia and reducing adverse events of LAs. Nano-structured carriers such as liposomes and polymersomes optimally meet the demands of/for extended-release, and have been utilized in drug delivery over decades and showed satisfactory results with extended-release. Based on mature technology of liposomes, EXPAREL, the first approved liposomal LA loaded with bupivacaine, has seen its success in an extended-release form. At the same time, polymersomes has advances over liposomes with complementary profiles, which inspires the emergence of hybrid carriers. This article summarized the recent research successes on nano-structured extended-release LAs, of which liposomal and polymeric are mainstream systems. Furthermore, with continual optimization, drug delivery systems carry properties beyond simple transportation, such as specificity and responsiveness. In the near future, we may achieve targeted delivery and controlled-release properties to satisfy various analgesic requirements.

Influence of PEG coating on the biodistribution and tumor accumulation of pH-sensitive liposomes

Liposomes are lipid vesicles widely used as nanocarriers in targeted drug delivery systems for therapeutic and/or diagnostic purposes. A strategy to prolong the blood circulation time of the liposomes includes the addition of a hydrophilic polymer polyethylene glycol (PEG) moiety onto the surface of the vesicle. Several studies claim that liposome PEGylation by a single chain length or a combination of PEG with different chain lengths may alter the liposomes' pharmacokinetic properties. Therefore, the purpose of this study was to evaluate the influence of PEG on the biodistribution of pH-sensitive liposomes in a tumor-bearing animal model. Three liposomal formulations (PEGylated or not) were prepared and validated to have a similar mean diameter, monodisperse distribution, and neutral zeta potential. The pharmacokinetic properties of each liposome were evaluated in healthy animals, while the biodistribution and scintigraphic images were evaluated in tumor-bearing mice. High tumor-to-muscle ratios were not statistically different between the PEGylated and non-PEGylated liposomes. While PEGylation is a well-established strategy for increasing the blood circulation of nanostructures, in our study, the use of polymer coating did not result in a better in vivo profile. Further studies must be carried out to confirm the feasibility of the non-PEGylated pH-sensitive liposomes for tumor treatment.

Developing a novel cholesterol-based nanocarrier with high transfection efficiency and serum compatibility for gene therapy

BACKGROUND/PURPOSE

Primary cells are sensitive to culture conditions, which can be more difficult to get efficient transfection. The purpose of this study is to develop a serum-compatible cholesterol-based nanocarrier for delivering therapeutic nucleic acids into cells efficiently for future clinical gene therapy.

METHODS

A novel cationic 3-β-[N-(2-guanidinoethyl)carbamoyl]-cholesterol (GEC-Chol) was mixed with cholesterol and superparamagnetic iron oxide (SPIO) nanoparticles to form GCC-Fe₃O₄ nanocarrier. Transfection efficiency and cytotoxicity in serum and non-serum conditions were evaluated. Florescent-labeled oligonucleotides (ODNs) were transfected as indicators. Fluorescent microscopy, confocal microscopy, and flow cytometry analysis were used for evaluations. Besides, we also delivered functional antisense c-myc ODNs as surrogates for specific gene manipulation in vitro.

RESULTS

Results indicated that GCC-Fe₃O₄ nanocarrier could have size down to less than 135 nm, which structure was highly stable and consistent over time. It also showed great transfection efficiency and low cytotoxicity in both serum and non-serum conditions. Our results demonstrated that GCC-Fe₃O₄ nanocarrier had exceeded 90% transfection efficiency, which was much better than common commercialized transfection reagents under same conditions. Such nanocarrier not only worked well in cell lines, but also ideal for gene delivery in primary cells.

CONCLUSION

With high transfection efficiency and serum compatibility, this novel biocompatible cholesterol-based nanocarrier provides an ideal platform especially for RNAi-based gene manipulation. It also opens a wide range of biomedical applications for in vivo cell tracking and gene therapeutics for clinical usage.

Non-viral Gene Delivery

Although viral vectors comprise the majority of gene delivery vectors, their various safety, production, and other practical concerns have left a research gap to be addressed. The non-viral vector space encompasses a growing variety of physical and chemical methods capable of gene delivery into the nuclei of target cells. Major physical methods described in this chapter are microinjection, electroporation, and ballistic injection, magnetofection, sonoporation, optical transfection, and localized hyperthermia. Major chemical methods described in this chapter are lipofection, polyfection, gold complexation, and carbon-based methods. Combination approaches to improve transfection efficiency or reduce immunological response have shown great promise in expanding the scope of non-viral gene delivery.

Tuning the Density of Poly(ethylene glycol) Chains to Control Mammalian Cell and Bacterial Attachment

Surface modification of biomaterials with polymer chains has attracted great attention because of their ability to control biointerfacial interactions such as protein adsorption, cell attachment and bacterial biofilm formation. The aim of this study was to control the immobilisation of biomolecules on silicon wafers using poly(ethylene glycol)(PEG) chains by a "grafting to" technique. In particular, to control the polymer chain graft density in order to capture proteins and preserve their activity in cell culture as well as find the optimal density that would totally prevent bacterial attachment. The PEG graft density was varied by changing the polymer solubility using an increasing salt concentration. The silicon substrates were initially modified with aminopropyl-triethoxysilane (APTES), where the surface density of amine groups was optimised using different concentrations. The results showed under specific conditions, the PEG density was highest with grafting under "cloud point" conditions. The modified surfaces were characterised with X-ray photoelectron spectroscopy (XPS), ellipsometry, atomic force microscopy (AFM) and water contact angle measurements. In addition, all modified surfaces were tested with protein solutions and in cell (mesenchymal stem cells and MG63 osteoblast-like cells) and bacterial (Pseudomonas aeruginosa) attachment assays. Overall, the lowest protein adsorption was observed on the highest polymer graft density, bacterial adhesion was very low on all modified surfaces, and it can be seen that the attachment of mammalian cells gradually increased as the PEG grafting density decreased, reaching the maximum attachment at medium PEG densities. The results demonstrate that, at certain PEG surface coverages, mammalian cell attachment can be tuned with the potential to optimise their behaviour with controlled serum protein adsorption.

Recombinant and chemo-/bio-orthogonal synthesis of liposomal thrombomodulin and its antithrombotic activity

Thrombomodulin (TM) is an endothelial cell membrane protein that acts as a major cofactor in the protein C anticoagulant pathway. The EGF-like domains 4-6 of TM (TM₄₅₆) are essential for PC activation. In this study, we proposed a liposomal recombinant TM conjugate to mimic the membrane TM structure and its anticoagulant activity. First, a DSPE-PEG₂₀₀₀-TM₄₅₆ was successfully synthesized by site-specific conjugation of azido-TM₄₅₆ with DSPE-PEG₂₀₀₀-DBCO via copper-free click chemistry quantitatively. Then, liposome-TM₄₅₆ was fabricated via direct liposome formation with the DSPE-PEG₂₀₀₀-TM₄₅₆ and other lipids. This liposomal formulation of TM₄₅₆ retained protein C activation activity as that of TM₄₅₆. Also, liposome-TM₄₅₆ was much more stable and had a longer plasma half-life than TM₄₅₆ and DSPE-PEG₂₀₀₀-TM₄₅₆, respectively. Moreover, liposome-TM₄₅₆ showed in vivo anticoagulant effect by decreasing the mortality from 80% to 20% in a thrombin-induced thromboembolism mouse model. The reported liposome-TM₄₅₆ conjugate mimics the endothelial TM anticoagulation activity and may serve as an effective anticoagulant agent candidate for future development.

Lanthanide chelate-encapsulated polystyrene nanoparticles for rapid and quantitative immunochromatographic assay of procalcitonin

Procalcitonin (PCT) is a potentially specific early marker of bloodstream infection and sepsis.

Effective tumor targeting and enhanced anti-tumor effect of liposomes engrafted with peptides specific for tumor lymphatics and vasculature

The use of liposomes to target drugs to tumors represents an attractive therapeutic strategy, especially when used with convenient targeting moieties such as peptides. Here we explored several peptides for their ability to target liposomes to tumors. The metal chelator lipid 3(nitrilotriacetic acid)-ditetradecylamine (NTA(3)-DTDA) was incorporated into liposomes to enable the engraftment of His-tagged peptides containing targeting motifs specific for tumor vasculature markers VEGFR-1 (p39-Flt-1) and neuropilin-1 (p24-NRP-1), or a motif known to accumulate in hypoxic areas of tumors (p47-LyP-1). Peptide-engrafted liposomes were examined for their biodistribution and anti-tumor effects after i.v. administration. Our results show that radiolabelled liposomes engrafted with either p24-NRP-1 or p47-LyP-1 and then injected into mice bearing subcutaneous B16-F1 tumors, show increased accumulation in the tumor. For p24-NRP-1-liposomes, tumor targeting was significantly increased when the stabilizing lipid phosphatidylethanolamine polyethylene glycol-750 (PE-PEG(750)) was used instead of PE-PEG(2000) in the liposome lipid mixture. Importantly, compared to the controls, p24-NRP-1 liposomes containing 10 mol% PE-PEG(750) and loaded with doxorubicin significantly inhibited the rate of tumor growth in the tumor-bearing mice. Our findings demonstrate that the use of drug-containing liposomes incorporating NTA(3)-DTDA and engrafted with NRP-1 targeting peptide is a convenient strategy to enhance the therapeutic effect of non-targeted doxorubicin.

Rational identification of a novel peptide for targeting nanocarriers to 9L glioma

Traditional therapies for high grade gliomas are limited in part by collateral damage to normal tissues. Selective delivery of therapies to tumors is, therefore, needed. Here, we report that liposomal nanocarriers coated with a novel oligopeptide enhance uptake by 9L gliosarcoma. A targeting nine amino acid peptide sequence (RSI) was identified by differential panning of random peptide phage display libraries on 9L cells and rat blood cells and plasma. Peptides were coupled to the surface of liposomal nanocarriers which were subsequently loaded with doxorubicin. The ability of RSI coated liposomes to facilitate drug uptake and cytotoxicity was compared with conventional liposomal nanocarriers and controls. In addition, plasma clearance profiles of the RSI peptide coupled liposomal nanocarriers were evaluated in adult immuno-competent rats. RSI peptide-coupled liposomal nanocarriers enhanced drug uptake by 9L cells by 500% compared with conventional liposomal nanocarriers, and significantly increased cytotoxicity. The plasma half-lives confirmed that the presence of the RSI peptide on the liposomal nanocarriers did not compromise circulation time in the blood in comparison with Stealth liposomal nanocarriers. These data suggest that phage-identified oligopeptides could lead to the development of new tumor selective nanocarriers.

Amphiphilic polyether branched molecules to increase the circulation time of cationic particles

The preparation, physicochemical and biological properties of amphiphilic polyether branched molecules is described. These 'bunch shaped' molecules when inserted into cationic liposomes/DNA complexes have shown efficient surface charge shielding. As a consequence they efficiently inhibited the non specific interactions with blood components and significantly enhanced circulation time of the particles in the blood track. Formulations containing these molecules compared positively with those containing PEG lipids, providing a 5-fold increase in circulation time.

Oral vaccination with modified vaccinia virus Ankara attached covalently to TMPEG-modified cationic liposomes overcomes pre-existing poxvirus immunity from recombinant vaccinia immunization

Development of a safe and effective vaccine for induction of mucosal immunity to the human immunodeficiency virus (HIV) envelope glycoprotein (Env, gp160) represents the best hope for containing the spread of an HIV epidemic worldwide. The highly attenuated modified vaccinia virus Ankara (MVA) is a laboratory virus well suited as a safe vaccine vector. However, the presence of pre-existing immunity to Vaccinia virus in the adult population represents a hindrance that limits the application of the MVA vector for inducing immunity to HIV antigens. Here, cationic liposomes were covalently attached to the surface of recombinant MVA expressing the HIV-1 strain IIIB Env glycoprotein and beta-galactosidase (MVA(IIIB/beta-gal)) using tresylmonomethoxypolyethylene glycol (TMPEG) grafted into a lipid membrane without compromising viral infectivity in vitro and in vivo. The orally administered MVA(IIIB/beta-gal)-TMPEG/liposome complexes were capable of delivering the transgenes to mucosal tissues in mice with pre-existing poxvirus immunity based on beta-galactosidase gene expression in intestinal tissues measured 18 h after infection. Importantly, the MVA(IIIB/beta-gal)-TMPEG/liposome complexes enhanced Env-specific cellular and humoral immune responses in the mucosal and systemic tissues after repeated oral immunization of BALB/c mice. This approach may prove useful for induction of protective immunity against infectious diseases and cancer in populations with pre-existing immunity to vaccinia from smallpox vaccination.

Association of hydrophobically-modified poly(ethylene glycol) with fusogenic liposomes

We present results on using cooperative interactions to shield liposomes by incorporating multiple hydrophobic anchoring sites on polyethylene glycol (PEG) polymers. The hydrophobically-modified PEGs (HMPEGs) are comb-graft polymers with strictly alternating monodisperse PEG blocks (M(w)=6, 12, or 35 kDa) bonded to C18 stearylamide hydrophobes. Cooperativity is varied by changing the degree of oligomerization at a constant ratio of PEG to stearylamide. Fusogenic liposomes prepared from N-C12-DOPE:DOPC 7:3 (mol:mol) were equilibrated with HMPEGs. Affinity for polymer association to liposomes increases with the degree of oligomerization; equilibrium constants (given as surface coverage per equilibrium concentration of free polymer) for 6 kDa PEG increased from 6.1+/-0.8 (mg/m(2))/(mg/ml) for 2.5 loops to 78.1+/-12.2 (mg/m(2))/(mg/ml) for 13 loops. In contrast, the equilibrium constant for distearoylphosphatidylethanolamine-poly(ethylene glycol) (DSPE-PEG5k) was 0.4+/-0.1 (mg/m(2))/(mg/ml). The multi-loop HMPEGs demonstrate higher levels of protection from complement binding than DSPE-PEG5k. Greater protection does not correlate with binding strength alone. The best shielding was by HMPEG6k-DP3 (with three 6 kDa PEG loops), suggesting that PEG chains with adequate surface mobility provide optimal protection from complement opsonization. Complement binding at 30 min and 12 h demonstrates that protection by multi-looped PEGs is constant whereas DSPE-PEG5k initially protects but presumably partitions off of the surface at longer times.

Targeting of antibody conjugated, phosphatidylserine-containing liposomes to vascular cell adhesion molecule 1 for controlled thrombogenesis

Phosphatidylserine (PS) membrane exposure plays an important role in blood coagulation, and the development of a liposome formulation containing PS may be of potential therapeutic utility if they can be designed to achieve tumor selective thrombosis. The objective of this study was to develop proof-of-principle data for a thrombogenic PS liposome targeted to vascular cell adhesion molecule 1 (VCAM-1) via the attachment of an anti-VCAM-1 monoclonal antibody (Ab). We have evaluated binding of the anti-VCAM-1 Ab-conjugated PS liposomes to VCAM-1 using two in vitro models, as well as assessing the ability of these liposomes to catalyze blood coagulation reactions. Binding of the Ab-conjugated PS liposomes containing 2 or 14 mol% 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[poly(ethylene glycol) 2000] (DSPE-PEG(2000)) to interleukin 1alpha stimulated human umbilical vein endothelial cells was 8- and 16-fold higher than those without conjugated Ab, respectively, based on the percentage relative increase in cell associated lipid for these liposomes. Binding to VCAM-1-coated ELISA plates produced similar results. The VCAM-1-bound Ab-conjugated PS liposomes were capable of catalyzing blood coagulation reactions upon the exposure of the thrombogenic PS membrane surface. This control of PS surface exposure was achieved using exchangeable PEG-derivatized phosphatidylethanolamines (PE-PEG), with 97% of clotting activity recovered after PE-PEG exchanged out. Our results demonstrate the potential for considering further development of procoagulant liposomes that selectively target thrombogenesis in tumor vasculature.

Attaching histidine-tagged peptides and proteins to lipid-based carriers through use of metal-ion-chelating lipids

The therapeutic potential of selected peptides and proteins is enormous, with applications ranging from use as therapeutic vaccines, as modulators of intracellular signaling pathways and as highly selective agents capable of recognizing unique extracellular targets. We have been pursuing development of hybrid lipid-based carrier formulations designed to take advantage of the therapeutic benefits of peptides selected for their ability to act in a complementary fashion with the carrier system. In this regard, it is critical to have simple and versatile methods to promote and control the binding of diverse peptides to a broad range of carrier formulations. As demonstrated here, recombinant proteins and synthetic peptides containing poly-histidine residues (4 to 10) can be specifically bound to liposomes containing a metal-ion-chelating lipid, DOGS-NTA-Ni. The potential of this approach is demonstrated using two functional peptides, AntpHD-Cw3 (applications for vaccine production) and AHNP (specificity for Her-2 expressing cells).

Stabilized plasmid-lipid particles: a systemic gene therapy vector

The ability of a systemically administered gene therapy vector to exhibit extended circulation lifetimes, accumulate at a distal tumor site, and enable transgene expression is unique to SPLP. The flexibility and low toxicity of SPLP as a platform technology for systemic gene therapy allows for further optimization of tumor transfection properties following systemic administration. For example, the PEG coating of SPLP is necessary to engender the long circulation lifetimes required to achieve tumor delivery. However, PEG coatings have also been shown to inhibit cell association and uptake required for transfection. The dissociation rate of the PEG coating from SPLP can be modulated by varying the acyl chain length of the ceramide anchor, suggesting the possibility of developing PEG-Cer molecules that remain associated with SPLP long enough to promote tumor delivery, but which dissociate quickly enough to allow transfection. Alternatively, improvements may be expected from inclusion of cell-specific targeting ligands in SPLP to promote cell association and uptake. Finally, the nontoxic properties of SPLP allow the possibility of higher doses. A dose of 100 micrograms plasmid DNA per mouse corresponds to a dose of approximately 5 mg plasmid DNA per kg body weight. This compares well to small molecules used for cancer therapy, which typically are used at dose levels of 10 to 50 mg per kg body weight. In summary, SPLP consist of plasmid encapsulated in a lipid vesicle that, in contrast to naked plasmid or complexes, exhibit extended circulation lifetimes following intravenous injection, resulting in accumulation and transgene expression at a distal tumor site in a murine model. The pharmacokinetics, biodistribution, and tumor transfection properties of SPLP are highly sensitive to the nature of the ceramide anchor employed to attach the PEG to the SPLP surface. The SPLP-CerC20 system in which the PEG-Cer does not readily dissociate exhibits good serum stability, long circulation lifetimes, and high levels of tumor accumulation and mediates marker gene expression at the tumor site. The flexibility of the SPLP system offers the potential of further optimization to achieve therapeutically effective levels of gene transfer and clearly has considerable potential as a nontoxic systemic gene therapy vehicle with general applicability. These features of SPLP contrast favorably with previous plasmid encapsulation procedures. Plasmid DNA has been encapsulated by a variety of methods, including reverse phase evaporation, ether injection, detergent dialysis in the absence of PEG stabilization, lipid hydration and dehydration-rehydration techniques, and sonication, among others. The characteristics of these protocols are summarized in Table I. None of these procedures yields small, serum-stable particles at high plasmid concentrations and plasmid-to-lipid ratios in combination with high plasmid-encapsulation efficiencies. Trapping efficiencies comparable with the SPLP procedure can be achieved employing methods relying on sonication. However, sonication is a harsh technique that can shear nucleic acids. Size ranges of 100 mm diameter or less can be achieved by reverse-phase techniques; however, this requires an extrusion step through filters with 100 nm or smaller pore size which can often lead to significant loss of plasmid. Finally, it may be noted that the plasmid DNA-to-lipid ratios that can be achieved for SPLP are significantly higher than those achievable by any other encapsulation procedure.

Conjugation of anti-My9 antibody to stealth monensin liposomes and the effect of conjugated liposomes on the cytotoxicity of immunotoxin

The carboxylic ionophore, monensin, was successfully entrapped in stealth liposomes by employing the pH-gradient method (interior pH of liposomes 9.5; exterior pH 5.0-5.9). A maximum of 14% of monensin could be entrapped in stealth liposomes by this method. The stealth liposomes could be successfully freeze-dried having mean particle size varying between 197 and 223 nm. The stealth liposomes were conjugated to anti-My9 monoclonal antibody (targeted against CD 33 antigen) by a disulfide linkage with almost full retention of immunoreactivity. The method of conjugation of liposomes with the antibody did not alter the particle size of liposomes and resulted in only 10% leakage of monensin. In-vitro cytotoxicity studies showed that antibody-conjugated monensin liposomes (3.5x10(-8) M monensin) potentiated the cytotoxicity of anti-My9 immunotoxin by a factor of 2070, in comparison to 360-fold potentiation observed with unconjugated monensin liposomes against human HL-60 promyelocytic leukemia cells. These results indicate that it is possible to enhance the in-vitro cytotoxicity of immunotoxin by several folds using antibody-conjugated monensin liposomes.

Intermembrane transfer of polyethylene glycol-modified phosphatidylethanolamine as a means to reveal surface-associated binding ligands on liposomes

In order to explore the use of exchangeable poly(ethylene glycol) (PEG)-modified diacylphosphatidylethanolamines (PE) to temporarily shield binding ligands attached to the surface of liposomes, a model reaction based on inhibition and subsequent recovery of biotinylated liposome binding to streptavidin immobilized on superparamagnetic iron oxide particles (SA magnetic particles) was developed. PEG-lipid incorporation into biotinylated liposomes decreased liposome binding to SA magnetic particles in a non-linear fashion, where as little as 0.1 mol% PEG-PE resulted in a 20% decrease in binding. Using an assay based on inhibition of binding, PEG(2000)-PE transfer from donor liposomes to biotinylated acceptor liposomes could be measured. The influence of temperature and acyl chain composition on the transfer of PEG-diacyl PEs from donor liposomes to acceptor liposomes, consisting of 1,2-dioleoyl-sn-glycero-3-phosphocholine, cholesterol and N-((6-biotinoyl)amino)hexanoyl)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine (54.9:45:0.1 mole ratio), was measured. Donor liposomes were prepared using 1,2-distearoyl-sn-glycero-3-phosphocholine (50 mol%), cholesterol (45 mol%) and 5 mol% of either PEG-derivatized 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine (DMPE-PEG(2000)), 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE-PEG(2000)), or 1,2-distearoyl-sn-glycero-3-phosphoethanolamine (DSPE-PEG(2000)). Transfer of DSPE-PEG(2000) to the donor liposomes was not detected under the conditions employed. In contrast, DMPE-PEG(2000) was transferred efficiently even at 4 degrees C. Using an acceptor to donor liposome ratio of 1:4, the time required for DMPE-PEG(2000) to become evenly distributed between the two liposome populations (T(EQ)) at 4 degrees C and 37 degrees C was approx. 2 and <0.5 h, respectively. An increase in acyl chain length from C14:0 to C16:0 of the PEG-lipid resulted in a significant reduction in the rate of transfer as measured by this assay. The transfer of PEG-lipid out of biotinylated liposomes was also studied in mice following intravenous administration. The relative rates of transfer for the various PEG-lipids were found to be comparable under in vivo and in vitro conditions. These results suggest that it is possible to design targeted liposomes with the targeting ligand protected while in the circulation through the use of PEG-lipids that are selected on the basis of exchange characteristics which result in exposure of the shielded ligand following localization within a target tissue.

Liposome targeting to tumors using vitamin and growth factor receptors

Liposome-encapsulated anticancer drugs reveal their potential for increased therapeutic efficacy and decreased nonspecific toxicities due to their ability to enhance the delivery of chemotherapeutic agents to solid tumors. Advances in liposome technology have resulted in the development of ligand-targeted liposomes capable of selectively increasing the efficacy of carried agents against receptor-bearing tumor cells. Receptors for vitamins and growth factors have become attractive targets for ligand-directed liposomal therapies due to their high expression levels on various forms of cancer and their ability to internalize after binding to the liposomes conjugated to receptors' natural ligands (vitamins) or synthetic agonists (receptor-specific antibodies and synthetic peptides). This chapter summarizes various strategies and advances in targeting liposomes to vitamin and growth factor receptors in vitro and in vivo with special emphasis on two extensively studied liposome-targeting systems utilizing folate receptor and HER2/neu growth factor receptor.

Synthesis of polyamide oligomers based on 14-amino-3,6,9, 12-tetraoxatetradecanoic acid

A series of oligomers of polyamides based on 14-amino-3,6,9, 12-tetraoxatetradecanoic acid monomers (ATTAn) was synthesized. These materials were designed as monodisperse analogues of poly(ethylene glycol) for use in biomedical applications where reproducible behavior is important. Synthesis of the monomer was evaluated using two routes. For small-scale preparations, tetraethylene glycol (TEG) was monoprotected with dihydropyran, converted to an alkoxide, and alkylated with ethyl bromoacetate. On larger scales, TEG was alkylated directly by treatment with sodium, followed by ethyl bromoacetate. The amine function was introduced by mesylation followed by treatment with sodium azide. Reduction of the azide to amino groups was performed over Pd/C using either hydrogen or formic acid as proton sources. Assembly of the oligomers was accomplished using standard DCC/NHS chemistry and an iterative dimerization sequence after appropriate deprotection of a pair of monomers. The amino group was protected by retaining the azido group as a latent amine. A series of ATTAn oligomers was prepared (n = 1-8). A lipid conjugate of the octamer, ATTA8-DSPE, was synthesized.

Modification of liposomes with N-substituted polyacrylamides: identification of proteins adsorbed from plasma

Liposomes prepared from DMPC (80%) and cholesterol (20%) were modified with a series of hydrophobically modified N-substituted polyacrylamides, namely, poly[N-isopropylacrylamide] (PNIPAM), poly[N,N-bis(2-methoxyethyl) acrylamide] (PMEAM), and poly[(3-methoxypropyl)acrylamide] (PMPAM). The hydrophobic group, N-[4-(1-pyrenylbutyl)-N-n-octadecylamine was attached to one end of the polymer chains to serve as an anchor for incorporation into the liposome bilayer. Liposome-polymer interactions were confirmed using fluorescence spectroscopy and chemical analysis. Microscopy revealed differences in aggregation tendency between unmodified and polymer-modified liposomes. Proteins adsorbed to liposome surfaces during exposure to human plasma were identified by immunoblot analysis. It was found that both unmodified and polymer-modified liposomes adsorb a wide variety of plasma proteins. Contact phase coagulation proteins, complement proteins, cell-adhesive proteins, serine protease inhibitors, plasminogen, antithrombin III, prothrombin, transferrin, alpha(2)-microglobulin, hemoglobin, haptoglobin and beta-lipoprotein as well as the major plasma proteins were all detected. Some differences were found between the unmodified and polymer-modified liposomes. The unmodified liposomes adsorbed plasminogen mainly as the intact protein, whereas on the modified liposomes plasminogen was present in degraded form. Also, the liposomes modified with PNIPAM in its extended conformation (below the lower critical solution temperature) appeared to adsorb less protein than those containing the 'collapsed' form of PNIPAM (above the LCST).

Biological barriers to cellular delivery of lipid-based DNA carriers

Although lipid-based DNA delivery systems are being assessed in gene therapy clinical trials, many investigators in this field are concerned about the inefficiency of lipid-based gene transfer technology, a criticism directed at all formulations used to enhance transfer of plasmid expression vectors. It is important to recognize that many approaches have been taken to improve transfection efficiency, however because of the complex nature of the formulation technology being developed, it has been extremely difficult to define specific carrier attributes that enhance transfection. We believe that these optimization processes are flawed for two reasons. First, a very defined change in formulation components affects the physical and chemical characteristics of the carrier in many ways. As a consequence, it has not been possible to define structure/activity relationships. Second, the primary endpoint used to assess plasmid delivery has been transgene expression, an activity that is under the control of cellular processes that have nothing to do with delivery. Gene expression following administration of a plasmid expression vector involves a number of critical steps: (i) DNA protection, (ii) binding to a specific cell population, (iii) DNA transfer across the cell membrane, (iv) release of DNA into the cytoplasm, (v) transport through the cell and across the nuclear membrane as well as (vi) transcription and translation of the gene. The objective of this review is to describe lipid-based DNA carrier systems and the attributes believed to be important in regulating the transfection activity of these formulations. Although membrane destabilization activity of the lipid-based carriers plays an important role, we suggest here that a critical element required for efficient transfection is dissociation of lipids bound to the plasmid expression vector following internalization.

Targetability of novel immunoliposomes prepared by a new antibody conjugation technique

In order to develop long-circulating immunoliposomes (IL), which combine sterical stabilization with a superior targetability, we have introduced a new methodology for attaching monoclonal antibodies directly onto the distal ends of liposome-grafted polyethylene glycol (PEG) chains. Therefore, we have synthesized a new PEG-PE derivative, which had been endgroup-functionalized with cyanuric chloride. Antibodies can simply be coupled to this membrane anchor in mild basic conditions (pH 8.8) without the need for previous antibody derivatizations. The coupling results have been determined with consideration to various liposome parameters and have been compared to several established antibody coupling procedures, where antibodies had been linked directly to the liposome surface in the presence of PEG (conventional IL). To investigate the targetability of the resulting new IL, anti E-selectin mAb have been coupled and the degree of binding selectin-containing cells has been analyzed. The terminal coupled antibodies show a 1.8-fold higher degree of in vitro cell binding compared to conventional IL, which has been attributed to the antibody position being more easy accessible at the PEG termini. Furthermore, we have illustrated the liposome surface topology and the coupled antibodies by atomic force microscopy, which for such fluid IL has been used first. These images have finely corresponded to the cell binding results, and have been discussed in terms of antibody position and flexibility at the liposome surface.

Stabilized plasmid-lipid particles: construction and characterization

A detergent dialysis procedure is described which allows encapsulation of plasmid DNA within a lipid envelope, where the resulting particle is stabilized in aqueous media by the presence of a poly(ethyleneglycol) (PEG) coating. These 'stabilized plasmid-lipid particles' (SPLP) exhibit an average size of 70 nm in diameter, contain one plasmid per particle and fully protect the encapsulated plasmid from digestion by serum nucleases and E. coli DNase I. Encapsulation is a sensitive function of cationic lipid content, with maximum entrapment observed at dioleoyldimethylammonium chloride (DODAC) contents of 5 to 10 mol%. The formulation process results in plasmid-trapping efficiencies of up to 70% and permits inclusion of 'fusigenic' lipids such as dioleoylphosphatidylethanolamine (DOPE). The in vitro transfection capabilities of SPLP are demonstrated to be strongly dependent on the length of the acyl chain contained in the ceramide group used to anchor the PEG polymer to the surface of the SPLP. Shorter acyl chain lengths result in a PEG coating which can dissociate from the SPLP surface, transforming the SPLP from a stable particle to a transfection-competent entity. It is suggested that SPLP may have utility as systemic gene delivery systems for gene therapy protocols.

Experimental and Monte Carlo simulation studies of the thermodynamics of polyethyleneglycol chains grafted to lipid bilayers

Experimental measurements of the affinity of binding of fluorescent acylated polyethyleneglycol (PEG) conjugates to bilayers containing varying levels of phosphatidylethanolamine-PEGs (PE-PEGs) have been combined with Monte Carlo simulations to investigate the properties of the polymer chains at a PEG-grafted lipid interface. The affinity of binding of such conjugates to large unilamellar phosphatidylcholine/phosphatidylethanolamine (9:1) vesicles decreases 27-fold as the size of the coupled PEG chain increases from 1 to 114 monomer units. Incorporation of increasing amounts of PE-PEG2000 or PE-PEG5000 into the vesicles progressively reduces the affinity of binding of acylpeptide-PEG2000 or -PEG5000 conjugates. Monte Carlo simulations of surfaces with grafted PEG chains revealed no significant dependence of several characteristic properties of the polymer chains, including the average internal energy per polymer and the radii of gyration, on the grafting density in the range examined experimentally. The average conformation of a surface-grafted PEG2000 or PEG5000 chain was calculated to be fairly extended even at low grafting densities, and the projected cross-sectional areas of the grafted PEG chains are considerably smaller than those predicted on the basis of the estimated Flory radius. The experimental variation of the binding affinity of acylated conjugates for bilayers containing varying mole fractions of PE-PEG2000 or -PEG5000 is well explained by expressions treating the surface-grafted PEG polymers either as a van der Waals gas or as a system of rigid discs described by scaled particle theory. From the combined results of our experimental and simulation studies we conclude that the grafted PEG chains exist in a "mushroom" regime throughout the range of polymer densities examined experimentally and that the diminished affinity of binding of acylated-PEG conjugates to bilayers containing PE-PEGs results from occlusion of the surface area accessible for conjugate binding by the mobile PE-PEG polymer chains.

Clearance properties of liposomes involving conjugated proteins for targeting

This review examines methods of protein conjugation onto liposomes and the effects of surface bound protein on the liposomes' biological behavior. It is evident that the presence of a conjugated protein significantly alters the attributes of targeted liposomes. Specifically, protein conjugation can result in dramatic increases in liposome size, enhanced immunogenicity, and increased plasma elimination. Techniques are discussed for preventing some of the physical (size) and biological (immunogenic) alterations involving the use of PEG-lipids and drug loaded liposomes. In addition, the advantages of conjugating antibodies via carbohydrate moieties, to minimize changes in antibody binding and tertiary structure as well as effectively decreasing plasma elimination, are also discussed. It is, however, apparent that the accessibility of targeted liposomes to extravascular sites is a key step that will require further study and it is, therefore, anticipated that with the development of novel ligands and novel ligand-liposome interactions, the therapeutic utility of targeting strategies will likely be realized.

Controlling liposome blood clearance by surface-grafted polymers

The incorporation of polymer-lipid conjugates, initially using PEG and subsequently other selected flexible, hydrophilic polymers, into lipid bilayers gives rise to sterically stabilized liposomes that exhibit reduced blood clearance and concomitant changes in tissue distribution largely because of reduced, but not eliminated, phagocytic uptake. Changes in tissue distribution includes 'passive' targeting localization into sites of tumors, infection, inflammation characterized by presence of a 'leaky' vasculature which represent useful applications for drug delivery. The polymer forms a surface coating which has been characterized by physical measurements and it appears to function through steric inhibition of the protein binding and cellular interactions leading to phagocytic uptake. The current understanding of the physical and biological properties are reviewed. Ongoing work in the field involves interests to increase complexity such as addition of (1) selective targeting ligands by chemical conjugation to the exterior surface of the polymer coating, (2) capabilities for intracellular release of encapsulated agents into the cytoplasm, and (3) both simultaneously.

Subcutaneous microvascular responses to hemodilution with a red cell substitute consisting of polyethyleneglycol-modified vesicles encapsulating hemoglobin

Phospholipid vesicles encapsulating purified hemoglobin [Hb vesicles (HbV); diameter 259 +/- 82 mm; oxygen affinity 31 mm Hg; [Hb] 5 and 10 g/dL] were developed to provide oxygen-carrying capacity to plasma expanders. Their function as a blood replacement was tested in the subcutaneous microvasculature of awake hamsters during severe hemodilution in which 80% of the red blood cell mass was substituted with suspensions of the vesicles in 5% human serum albumin (HSA) solution. Vesicles were tested with membranes that were unmodified (HbV/HSA) or conjugated with polyethyleneglycol (PEG) on the vesicular surface (PEG-HbV/HSA). The viscosity of 10 g/dL HbV/HSA was 8 cP at 358 s-1 owing to the intervesicular aggregation, while that of 10 g/dL PEG-HbV/HSA was 3.5 cP, since PEG chains inhibit aggregation. Both materials yielded normal mean arterial pressure, heart rate, and blood gas parameters at all levels of exchange, which could not be achieved with HSA alone. Subcutaneous microvascular studies showed that PEG-HbV/HSA significantly improved microhemodynamic conditions (flow rate, functional capillary density, vessel diameter, and oxygen tension) relative to unmodified HbV/HSA. Even though the enhancement of PEG modification did not achieve the functional characteristics of the blood-perfused microcirculation, PEG reduced vesicular aggregation and viscosity, improving microvascular perfusion relative to the unmodified type. These results highlight the significance of microvascular analysis in the design of red cell substitutes and the necessity of surface modification of HbV to prevent aggregation.

An immune response to ovalbumin covalently coupled to liposomes is prevented when the liposomes used contain doxorubicin

It is now well established that liposomes with surface associated proteins are immunogenic. Repeated administration of protein coated liposomes elicits the generation of antibodies and the elimination of proteoliposome increases markedly in animals 'immunized' with such liposomes. This immune response compromises the therapeutic potential of liposomal formulations that rely on the use of protein- or peptide-based targeting ligands to enhance cell specificity. Strategies to suppress or inhibit such immune responses must be developed if this technology is going to prove therapeutically viable. This study evaluates whether an immune response to a protein, covalently attached to liposomes by a thioether bond between N-succinimidyl-3-(2-pyridyldithio)propionate (SPDP)-modified-protein and N-(4-(P-maleimidophenyl)butyryl) (MPB)-activated lipids, can be suppressed when the liposomes used contain the anti-cancer drug doxorubicin. To assess this, the highly immunogenic protein ovalbumin was conjugated onto liposomes composed of distearoylphosphatidylcholine/cholesterol (DSPC/Chol) with sufficient poly(ethylene glycol)-modified distearoyl phosphatidylethanolamine (PEG-DSPE) (2 mol%) to prevent liposome aggregation during protein coupling and to engender increased circulation lifetimes. The immune response to these liposomes with and without encapsulated doxorubicin was measured by: (1) monitoring liposome elimination after 3 weekly i.v. injections in C3H/HeJ mice and (2) measuring the anti-ovalbumin antibody levels by an ELISA assay. One week after a single dose of ovalbumin-coated PEG liposomes (50 microg protein/mouse) the immune response resulted in rapid elimination of a second dose of ovalbumin-coated PEG liposomes. Rapid liposome elimination was correlated to generation of high levels (> 9 microg/ml plasma) of circulating anti-ovalbumin IgG. In contrast, anti-ovalbumin antibodies were not detected when the liposomes used contained doxorubicin. Plasma elimination of these drug loaded protein coated liposomes decreased following repeated weekly i.v. doses, an effect that is consistent with liposomal doxorubicin mediated suppression of phagocytic cells in the liver.

A liposome-based model system for the simulation of lectin-induced cell adhesion

A parallel plate flow chamber with defined wall shear rates was developed in order to study and simulate cellular adhesion to biological membranes as mediated by lectin/carbohydrate interactions. Planar bilayers containing clustered areas of various long-chain alkyl mannosides as carbohydrate ligands and supported on transparent materials were used as model membranes. Their interaction with liposomes bearing Concanavalin A as model cells was observed fluorimetrically by confocal laser scanning microscopy. The use of supported membranes made it possible to study the dependence of adhesion upon different physicochemical parameters of membranes. The liposomes of this model were able to simulate the lectin-mediated adhesion of cells in a shear flow. Once specific receptor-mediated adhesion had taken place, liposomes tended to attach irreversibly to the membrane. This could be avoided by employing lipid compositions which represent a special balance between charged and polyethylene glycol-coupled lipids. This is discussed in term of the interplay between the various attractive and repulsive forces at membrane surfaces. The dependence of liposome adhesion upon the shear rate could be detected. These results were used to evaluate binding forces between lectin-bearing liposomes and ligand-containing planar bilayers.

Plasmid DNA is protected against ultrasonic cavitation-induced damage when complexed to cationic liposomes

Cationic liposomes bound to plasmid DNA are currently used for in vitro and in vivo gene therapy applications, but such complexes readily form large, heterogeneous aggregates that are not appropriate for pharmaceutical development. More importantly, size heterogeneity makes studies focused on optimizing gene transfer to cells difficult to conduct or understand. For this reason we have evaluated the effect of microprobe sonication on these complexes in an effort to achieve process-controlled size homogeneity. Complexes were prepared using a 7.2 kb reporter plasmid and the following liposomal lipid combinations: DDAB/DOPE (50:50 mol %), DDAB/DOPE/PEG-PE (50:45:5 mol %), DDAB/EPC (50:50 mol %), DDAB/EPC/PEG-PE (50:45:5, 50:40:10, 50:35:15 mol %), DODAC/DOPE (50:50 mol %), and DODAC/EPC (50:50 mol %) (DDAB, dimethyldioctadecylammonium bromide; DOPE, dioleoylphosphatidylethanolamine; PEG-PE, monomethoxypolyethylene glycol2000 succinate- distearoylphosphatidylethanolamine; EPC, egg phosphatidylcholine; DODAC, dioleoyldimethylammonium chloride). The influence of complex composition and lipid:DNA ratio was evaluated. Particle size was determined before and after complexation and again after sonication using the quasi-elastic light scattering technique. DNA integrity was assessed via agarose gel electrophoresis. Finally, gene transfection was evaluated using CHO cells that were transfected in vitro with sonicated and unsonicated complexes. It is established in this study that size reduction can occur, but this is dependent on cationic and neutral lipid composition and, in some cases, lipid:DNA ratio. Surprisingly, the process of sonication leaves a significant percentage of the plasmid DNA intact and capable of in vitro transfection. This study shows that plasmid DNA can be protected from damage due to sonication by liposome complex formation. This may indicate that more common pharmaceutical methods for size reduction which subject particles to mechanical stress may be applicable in preparation of liposome/DNA formulations for in vivo application.