The Formation Mechanism of Fluorescent Metal Complexes at the LixNi0.5Mn1.5O4−δ/Carbonate Ester Electrolyte Interface

Advancing Mn-Based Li-Ion Battery Cathodes via a Partially Cation-Disordered Zigzag-Type Li-Nb-Mn-O Framework

Mn-based Li-ion battery cathodes encompass a great variety of materials structures. Decades of research effort have proven that developing a Mn-based structure featuring a high redox activity, stable cycling, and cost-effectiveness is a longstanding challenge. Motivated by such a need and inspired by the structural diversity of Mn-based cathodes, we develop a partially cation-disordered lithium niobium manganese oxide with a zigzag structure, filling the knowledge gap between zigzag-ordered and fully disordered Li-Mn-based oxides. Electrochemically, the partially disordered cathode greatly unlocks the redox activity of the zigzag lattice and maintains the cycling stability. Mechanism-wise, the partial disordering suppresses the disproportionation reaction of Mn(III) and facilitates a disordered λ-MnO2-tetragonal cation-disordered rock salt structural transformation. The work suggests the substantial opportunity of using partial disordering as the key strategy to revive locked-up redox activities and realize new energy storage mechanisms, for the pursuit of high-performance cost-effective battery materials.

Data-driven design of electrolyte additives supporting high-performance 5 V LiNi0.5Mn1.5O4 positive electrodes

LiNi0.5Mn1.5O4 (LNMO) is a high-capacity spinel-structured material with an average lithiation/de-lithiation potential at ca. 4.6-4.7 V vs Li+/Li, far exceeding the stability limits of electrolytes. An efficient way to enable LNMO in lithium-ion batteries is to reformulate an electrolyte composition that stabilizes both graphitic (Gr) negative electrode with solid-electrolyte-interphase and LNMO with cathode-electrolyte-interphase. In this study, we select and test a diverse collection of 28 single and dual additives for the Gr||LNMO battery system. Subsequently, we train machine learning models on this dataset and employ the trained models to suggest 6 binary compositions out of 125, based on predicted final area-specific-impedance, impedance rise, and final specific-capacity. Such machine learning-generated new additives outperform the initial dataset. This finding not only underscores the efficacy of machine learning in identifying materials in a highly complicated application space but also showcases an accelerated material discovery workflow that directly integrates data-driven methods with battery testing experiments.

Construction of uniform MgO nanoshells for improved high-voltage performance of Li-ion batteries

A conformal Mg(OH)2 nanoshell was constructed through a wet-chemical process, where a gradual release of OH- as the precipitating agent was designed to ensure the heterogeneous growth of the coating species. Such a coating treatment was found to be efficient in improving the structural stability and electrochemical stability of a 5 V LiNi0.5Mn1.5O4 cathode.

Electrochemical lithium extraction from hectorite ore

Electrochemical technologies add a unique dimension for ore refinement, representing tunable methods that can integrate with renewable energy sources and existing downstream process flows. However, the development of electrochemical extraction technologies has been impeded by the technological maturity of hydro- and pyro-metallurgy, as well as the electrical insulating properties of many metal oxide ores. The fabrication and use of carbon/insulating material composite electrodes has been a longstanding method to enable electrochemical activation. Here, using real hectorite ore, we employ this technical approach to fabricate hectorite-carbon black composite electrodes (HCCEs) and achieve electrochemical activation of hectorite. Anodic polarization results in lithium-ion release through a multi-step chemical and electrochemical mechanism that results in 50.7 ± 4.4% removal of lithium from HCCE, alongside other alkaline ions. This technical proof-of-concept study underscores that electrochemical activation of ores can facilitate lattice deterioration and ion removal from ores.

Designing 2D carbon dot nanoreactors for alcohol oxidation coupled with hydrogen evolution

The coupled green energy and chemical production by photocatalysis represents a promising sustainable pathway, which poses great challenges for the multifunction integration of catalytic systems. Here we show a promising green photocatalyst design using Cu-ZnIn2S4 nanosheets and carbon dots as building units, which enables the integration of reaction, mass transfer, and separation functions in the nano-space, mimicking a nanoreactor. This function integration results in great activity promotion for benzyl alcohol oxidation coupled H2 production, with H2/benzaldehyde production rates of 45.95/46.47 mmol g-1 h-1, 36.87 and 36.73 times to pure ZnIn2S4, respectively, owning to the enhanced charge accumulation and mass transfer according to in-situ spectroscopies and computational simulations of the built-in electrical field. Near-unity selectivity of benzaldehyde is achieved via the effective separation enabled by the Cu(II)-mediated conformation flipping of the intermediates and subsequent π-π conjugation. This work demonstrates an inspiring proof-of-concept nanoreactor design of photocatalysts for coupled sustainable systems.

The Influence of Cathode Degradation Products on the Anode Interface in Lithium-Ion Batteries

Degradation of cathode materials in lithium-ion batteries results in the presence of transition metal ions in the electrolyte, and these ions are known to play a major role in capacity fade and cell failure. Yet, while it is known that transition metal ions migrate from the metal oxide cathode and deposit on the graphite anode, their specific influence on anode reactions and structures, such as the solid electrolyte interphase (SEI), is still quite poorly understood due to the complexity in studying this interface in operational cells. In this work we combine operando electrochemical atomic force microscopy (EC-AFM), electrochemical quartz crystal microbalance (EQCM), and electrochemical impedance spectroscopy (EIS) measurements to probe the influence of a range of transition metal ions on the morphological, mechanical, chemical, and electrical properties of the SEI. By adding representative concentrations of Ni2+, Mn2+, and Co2+ ions into a commercially relevant battery electrolyte, the impacts of each on the formation and stability of the anode interface layer is revealed; all are shown to pose a threat to battery performance and stability. Mn2+, in particular, is shown to induce a thick, soft, and unstable SEI layer, which is known to cause severe degradation of batteries, while Co2+ and Ni2+ significantly impact interfacial conductivity. When transition metal ions are mixed, SEI degradation is amplified, suggesting a synergistic effect on the cell stability. Hence, by uncovering the roles these cathode degradation products play in operational batteries, we have provided a foundation upon which strategies to mitigate or eliminate these degradation products can be developed.

Fluorine Chemistry in Rechargeable Batteries: Challenges, Progress, and Perspectives

The renewable energy industry demands rechargeable batteries that can be manufactured at low cost using abundant resources while offering high energy density, good safety, wide operating temperature windows, and long lifespans. Utilizing fluorine chemistry to redesign battery configurations/components is considered a critical strategy to fulfill these requirements due to the natural abundance, robust bond strength, and extraordinary electronegativity of fluorine and the high free energy of fluoride formation, which enables the fluorinated components with cost effectiveness, nonflammability, and intrinsic stability. In particular, fluorinated materials and electrode|electrolyte interphases have been demonstrated to significantly affect reaction reversibility/kinetics, safety, and temperature tolerance of rechargeable batteries. However, the underlining principles governing material design and the mechanistic insights of interphases at the atomic level have been largely overlooked. This review covers a wide range of topics from the exploration of fluorine-containing electrodes, fluorinated electrolyte constituents, and other fluorinated battery components for metal-ion shuttle batteries to constructing fluoride-ion batteries, dual-ion batteries, and other new chemistries. In doing so, this review aims to provide a comprehensive understanding of the structure-property interactions, the features of fluorinated interphases, and cutting-edge techniques for elucidating the role of fluorine chemistry in rechargeable batteries. Further, we present current challenges and promising strategies for employing fluorine chemistry, aiming to advance the electrochemical performance, wide temperature operation, and safety attributes of rechargeable batteries.

Microstructural Insights into Performance Loss of High-Voltage Spinel Cathodes for Lithium-ion Batteries

Spinel-structured LiNix Mn2-x O4 (LNMO), with low-cost earth-abundant constituents, is a promising high-voltage cathode material for lithium-ion batteries. Even though extensive electrochemical investigations have been conducted on these materials, few studies have explored correlations between their loss in performance and associated changes in microstructure. Here, down to the atomic scale, the structural evolution of these materials is investigated upon the progressive cycling of lithium-ion cells. Transgranular cracking is revealed to be a key feature during cycling; this cracking is initiated at the particle surface and leads to the penetration of electrolytes along the crack path, thereby increasing particle exposure to the electrolyte. The lattice structure on the crack surface shows spatial variances, featuring a top layer of rock-salt, a sublayer of a Mn3 O4 -like arrangement, and then a mixed-cation region adjacent to the bulk lattice. The transgranular cracking, along with the emergence of local lattice distortion, becomes more evident with extended cycling. Further, phase transformation at primary particle surfaces and void formation through vacancy condensation is found in the cycled samples. All these features collectively contribute to the performance degradation of the battery cells during electrochemical cycling.

Three-dimensional operando optical imaging of particle and electrolyte heterogeneities inside Li-ion batteries

Understanding (de)lithiation heterogeneities in battery materials is key to ensure optimal electrochemical performance. However, this remains challenging due to the three-dimensional morphology of electrode particles, the involvement of both solid- and liquid-phase reactants and a range of relevant timescales (seconds to hours). Here we overcome this problem and demonstrate the use of confocal microscopy for the simultaneous three-dimensional operando measurement of lithium-ion dynamics in individual agglomerate particles, and the electrolyte in batteries. We examine two technologically important cathode materials: LixCoO2 and LixNi0.8Mn0.1Co0.1O2. The surface-to-core transport velocity of Li-phase fronts and volume changes are captured as a function of cycling rate. Additionally, we visualize heterogeneities in the bulk and at agglomerate surfaces during cycling, and image microscopic liquid electrolyte concentration gradients. We discover that surface-limited reactions and intra-agglomerate competing rates control (de)lithiation and structural heterogeneities in agglomerate-based electrodes. Importantly, the conditions under which optical imaging can be performed inside the complex environments of battery electrodes are outlined.

The role of ethylene carbonate (EC) and tetramethylene sulfone (SL) in the dissolution of transition metals from lithium-ion cathodes

Transition metal (TM) dissolution is a direct consequence of cathode-electrolyte interaction, having implications not only for the loss of redox-active material from the cathode but also for the alteration of solid electrolyte interphase (SEI) composition and stability at the counter electrode. It has widely been reported that the limited anodic stability of typical carbonate-based electrolytes, specifically ethylene carbonate (EC)-based electrolytes, makes high-voltage cathode performance problematic. Hence, the more anodically stable tetramethylene sulfone (SL) has herein been utilized as a co-solvent and a substitute for EC in combination with diethyl carbonate (DEC) to investigate the TM dissolution behavior of LiN_0.8C_0.17Al_0.03 (NCA) and LiMn₂O₄ (LMO). EC|DEC and SL|DEC solvents in combination with either LiPF₆ or LiBOB salts have been evaluated, with LFP as a counter electrode to eliminate the influence of low potential anodes. Oxidative degradation of EC is shown to propagate HF generation, which is conversely reflected by an increased TM dissolution. Therefore, TM dissolution is accelerated by the acidification of the electrolyte. Although replacing EC with the anodically stable SL reduces HF generation and effectively mitigates TM dissolution, SL containing electrolytes are demonstrated to be less capable of supporting Li-ion transport and thus show lower cycling stability.

Solution NMR of Battery Electrolytes: Assessing and Mitigating Spectral Broadening Caused by Transition Metal Dissolution

NMR spectroscopy is a powerful tool that is commonly used to assess the degradation of lithium-ion battery electrolyte solutions. However, dissolution of paramagnetic Ni²⁺ and Mn²⁺ ions from cathode materials may affect the NMR spectra of the electrolyte solution, with the unpaired electron spins in these paramagnetic solutes inducing rapid nuclear relaxation and spectral broadening (and often peak shifts). This work establishes how dissolved Ni²⁺ and Mn²⁺ in LiPF₆ electrolyte solutions affect ¹H, ¹⁹F, and ³¹P NMR spectra of pristine and degraded electrolyte solutions, including whether the peaks from degradation species are at risk of being lost and whether the spectral broadening can be mitigated. Mn²⁺ is shown to cause far greater peak broadening than Ni²⁺, with the effect of Mn²⁺ observable at just 10 μM. Generally, ¹⁹F peaks from PF₆ ^- degradation species are most affected by the presence of the paramagnetic metals, followed by ³¹P and ¹H peaks. Surprisingly, when NMR solvents are added to acquire the spectra, the degree of broadening is heavily solvent-dependent, following the trend of solvent donor number (increased broadening with lower solvent donicity). Severe spectral broadening is shown to occur whether Mn is introduced via the salt Mn(TFSI)₂ or is dissolved from LiMn₂O₄. We show that the weak ¹⁹F and ³¹P peaks in spectra of electrolyte samples containing micromolar levels of dissolved Mn²⁺ are broadened to an extent that they are no longer visible, but this broadening can be minimized by diluting electrolyte samples with a suitably coordinating NMR solvent. Li₃PO₄ addition to the sample is also shown to return ¹⁹F and ³¹P spectral resolution by precipitating Mn²⁺ out of electrolyte samples, although this method consumes any HF in the electrolyte solution.

Method development for the investigation of Mn2+/3+ , Cu2+ , Co2+ , and Ni2+ with capillary electrophoresis hyphenated to inductively coupled plasma-mass spectrometry

The lifetime of lithium ion batteries (LIBs) decreases under continuous cycling due to various degradation processes, such as dissolution of transition metals (TMs) from the electrodes. Therefore, suitable methods to analyze the oxidation states of TMs are mandatory to better understand the dissolution mechanisms of TMs from positive and negative electrodes (LIBs). To investigate the dissolution of Mn²⁺ and Mn³⁺ in electrolytes of LIBs, a previously implemented capillary electrophoresis (CE) method with UV/Vis spectroscopy detection was further developed with the aim of higher sensitivities and additional detection of other dissolved divalent TMs such as Co²⁺ , Ni²⁺ , and Cu²⁺ . Therefore, inductively coupled plasma-mass spectrometry was applied instead of UV/Vis for detection. This also allows the use of Ga³⁺ instead of the previously used Cu²⁺ as an internal standard, which solves the limitation of this method for cycled LIBs due to copper dissolution from the copper-based current collector. The CE buffer based on sodium diphosphate as complexing agent for the stabilization of Mn³⁺ and cetyltrimethylammonium bromide as dynamic capillary wall modifier was optimized in terms of concentrations and pH. Finally, both manganese species and Co²⁺ , Ni²⁺ , and Cu²⁺ could be analyzed within 15 min. With this improved method, the dissolution of TMs in LIBs for positive electrode materials such as LiNi_0.5 Mn_1.5 O₄ (LNMO) or LiNi_x Co_y Mn_z O₂ (NCM, x + y + z = 1) can be studied in future in more detail.

Microcracking of Ni-rich layered oxide does not occur at single crystal primary particles even abused at 4.7 V

There is a controversial issue based on the particle cracking of the Ni-rich layered oxide cathode materials whether it occurs at the primary particles or the grain boundary. Herein, we found that the microcracking of NMC811 does not occur at single crystalline primary particles even abused at a severe upper cell voltage of 4.7 V having a lot of gas evolution since the single-crystal NMC811 has superior mechanical stability. The capacity retentions determined at 1C rate and a 100% state of charge (SOC) are 80% and 50% after 1000 cycles for single crystal and polycrystal NMC811, respectively.

On the Durability of Protective Titania Coatings on High-Voltage Spinel Cathodes

TiO2 -coating of LiNi0.5-x Mn1.5+x O4 (LNMO) by atomic layer deposition (ALD) has been studied as a strategy to stabilize the cathode/electrolyte interface and mitigate transition metal (TM) ion dissolution. The TiO2 coatings were found to be uniform, with thicknesses estimated to 0.2, 0.3, and 0.6 nm for the LNMO powders exposed to 5, 10, and 20 ALD cycles, respectively. While electrochemical characterization in half-cells revealed little to no improvement in the capacity retention neither at 20 nor at 50 °C, improved capacity retention and coulombic efficiencies were demonstrated for the TiO2 -coated LNMO in LNMO||graphite full-cells at 20 °C. This improvement in cycling stability could partly be attributed to thinner cathode electrolyte interphase on the TiO2 -coated samples. Additionally, energy-dispersive X-ray spectroscopy revealed a thinner solid electrolyte interphase on the graphite electrode cycled against TiO2 -coated LNMO, indicating retardation of TM dissolution by the TiO2 -coating.

The Effects of Ru4+ Doping on LiNi0.5Mn1.5O4 with Two Crystal Structures

Doping of Ru has been used to enhance the performance of LiNi_0.5Mn_1.5O₄ cathode materials. However, the effects of Ru doping on the two types of LiNi_0.5Mn_1.5O₄ are rarely studied. In this study, Ru⁴⁺ with a stoichiometric ratio of 0.05 is introduced into LiNi_0.5Mn_1.5O₄ with different space groups (Fd3¯m, P4₃32). The influence of Ru doping on the properties of LiNi_0.5Mn_1.5O₄ (Fd3¯m, P4₃32) is comprehensively studied using multiple techniques such as XRD, Raman, and SEM methods. Electrochemical tests show that Ru⁴⁺-doped LiNi_0.5Mn_1.5O₄ (P4₃32) delivers the optimal electrochemical performance. Its initial specific capacity reaches 132.8 mAh g^-1, and 97.7% of this is retained after 300 cycles at a 1 C rate at room temperature. Even at a rate of 10 C, the capacity of Ru⁴⁺-LiNi_0.5Mn_1.5O₄ (P4₃32) is still 100.7 mAh g^-1. Raman spectroscopy shows that the Ni/Mn arrangement of Ru⁴⁺-LiNi_0.5Mn_1.5O₄ (Fd3¯m) is not significantly affected by Ru⁴⁺ doping. However, LiNi_0.5Mn_1.5O₄ (P4₃32) is transformed to semi-ordered LiNi_0.5Mn_1.5O₄ after the incorporation of Ru⁴⁺. Ru⁴⁺ doping hinders the ordering process of Ni/Mn during the heat treatment process, to an extent.

Application of Advanced Vibrational Spectroscopy in Revealing Critical Chemical Processes and Phenomena of Electrochemical Energy Storage and Conversion

The future of the energy industry and green transportation critically relies on exploration of high-performance, reliable, low-cost, and environmentally friendly energy storage and conversion materials. Understanding the chemical processes and phenomena involved in electrochemical energy storage and conversion is the premise of a revolutionary materials discovery. In this article, we review the recent advancements of application of state-of-the-art vibrational spectroscopic techniques in unraveling the nature of electrochemical energy, including bulk energy storage, dynamics of liquid electrolytes, interfacial processes, etc. Technique-wise, the review covers a wide range of spectroscopic methods, including classic vibrational spectroscopy (direct infrared absorption and Raman scattering), external field enhanced spectroscopy (surface enhanced Raman and IR, tip enhanced Raman, and near-field IR), and two-photon techniques (2D infrared absorption, stimulated Raman, and vibrational sum frequency generation). Finally, we provide perspectives on future directions in refining vibrational spectroscopy to contribute to the research frontier of electrochemical energy storage and conversion.

Precise surface control of cathode materials for stable lithium-ion batteries

The increasing demand for high-energy Li-ion batteries (LIBs) continues to push the development of electrode materials, particularly cathode materials, towards their capacity limits. Despite the enormous success, the stability and reliability of LIBs are becoming a serious concern due to the much-aggravated side reactions between electrode materials and organic electrolytes. How to stabilize the cathode/electrolyte interface is therefore an imperative and urgent task drawing considerable attention from both academia and industry. An active treatment on the surface of cathode materials, usually by introducing an inert protection layer, to diminish their side reaction with electrolytes turns out to be a reasonable and effective strategy. This Feature Article firstly outlines our synthesis efforts for the construction of a uniform surface nanocoating on various cathode materials. Different wet chemical routes have been designed to facilitate the control of growth kinetics of targeted coating species so that a precise surface coating could be achieved with nanometer accuracy. Furthermore, we showed the possibility to transform the outer coating layer into a surface doping effect through surface solid reaction at high temperature. A detailed discussion on the structure-performance relationship of these surface-controlled cathode materials is introduced to probe the stabilization mechanism. Finally, perspectives on the development tendency of high-energy cathodes for stable LIBs are provided.

Operando monitoring of ion activities in aqueous batteries with plasmonic fiber-optic sensors

Understanding ion transport kinetics and electrolyte-electrode interactions at electrode surfaces of batteries in operation is essential to determine their performance and state of health. However, it remains a challenging task to capture in real time the details of surface-localized and rapid ion transport at the microscale. To address this, a promising approach based on an optical fiber plasmonic sensor capable of being inserted near the electrode surface of a working battery to monitor its electrochemical kinetics without disturbing its operation is demonstrated using aqueous Zn-ion batteries as an example. The miniature and chemically inert sensor detects perturbations of surface plasmon waves propagating on its surface to rapidly screen localized electrochemical events on a sub-μm-scale thickness adjacent to the electrode interface. A stable and reproducible correlation between the real-time ion insertions over charge-discharge cycles and the optical plasmon response has been observed and quantified. This new operando measurement tool will provide crucial additional capabilities to battery monitoring methods and help guide the design of better batteries with improved electro-chemistries.

Operando tracking the ion dynamics/states of battery is critical to understanding of electrolyte-electrode interactions. Here the authors propose to use the surface plasmon waves to rapidly screen localized electrochemical events on a sub-μm-scale thickness adjacent to the electrode interface, without perturbing battery operation.

Mechanical studies of the solid electrolyte interphase on anodes in lithium and lithium ion batteries

A stable solid electrolyte interphase (SEI) layer is key to high performing lithium ion and lithium metal batteries for metrics such as calendar and cycle life. The SEI must be mechanically robust to withstand large volumetric changes in anode materials such as lithium and silicon, so understanding the mechanical properties and behavior of the SEI is essential for the rational design of artificial SEI and anode form factors. The mechanical properties and mechanical failure of the SEI are challenging to study, because the SEI is thin at only ~10-200 nm thick and is air sensitive. Furthermore, the SEI changes as a function of electrode material, electrolyte and additives, temperature, potential, and formation protocols. A variety ofin situandex situtechniques have been used to study the mechanics of the SEI on a variety of lithium ion battery anode candidates; however, there has not been a succinct review of the findings thus far. Because of the difficulty of isolating the true SEI and its mechanical properties, there have been a limited number of studies that can fully de-convolute the SEI from the anode it forms on. A review of past research will be helpful for culminating current knowledge and helping to inspire new innovations to better quantify and understand the mechanical behavior of the SEI. This review will summarize the different experimental and theoretical techniques used to study the mechanics of SEI on common lithium battery anodes and their strengths and weaknesses.

High Voltage-Stabilized Graphdiyne Cathode Interface

Suppressing the irreversible interfacial reactions is an important scientific bottleneck in the development of stable high-energy-density lithium-ion battery. The interfacial chemistry of graphdiyne (GDY) on the high-voltage cathode of LiNi_0.5 Mn_1.5 O₄ (LNMO) shows a very interesting process, in which the sp-hybridization carbon atoms chemically scavenge the hydrofluoric acid (HF) and in situ form the fluorinated GDY interface. It first turns the harmful HF into profit, and greatly enhances the interfacial stability and restrains the side reaction on the cathode under high working voltage. The GDY-coated LNMO cathode obviously alleviates the electrolyte degradation, achieves high Coulombic efficiency and reliability. Due to atomic-level selectivity and chemical trapping of HF by GDY, it effectively suppresses the dissolution of Mn, Ni elements. These results highlight the unparalleled advantages of GDY in the formation of high stable interfaces and protection of high-energy-density electrodes.

Self-Assembled Monolayers for Batteries

Current studies in the Li-battery field are focusing on building systems with higher energy density than ever before. The path toward this goal, however, should not ignore aspects such as safety, stability, and cycling life. These issues frequently originate from interfacial instability, and therefore, precise surface chemistry that allows for accurate control of material surface and interfaces is much in demand for advanced battery research. Molecular self-assembly as a surface chemistry tool is considered to surpass many conventional coating techniques due to its intrinsic merits such as spontaneous organization, molecular-scale uniformity, and structural diversity. Recent publications have demonstrated the power of self-assembled monolayers (SAMs) in addressing pressing issues in the battery field such as the chemical stability of Li, but many more investigations are needed to fully explore the potential and impact of this technique on energy storage. This perspective is the first of its kind devoted to SAMs in batteries and related materials. Recent research progress on SAMs in batteries is reviewed and mainly falls in two categories, including the improvement of chemical stability and the regulation of nucleation in conversion electrode reactions. Future applications and consideration of SAMs in energy storage are discussed. We believe these summaries and outlooks are highly stimulative and may benefit future advancements in battery chemistry.

Reversible Deposition and Stripping of the Cathode Electrolyte Interphase on Li2RuO3

Performance decline in Li-excess cathodes is generally attributed to structural degradation at the electrode-electrolyte interphase, including transition metal migration into the lithium layer and oxygen evolution into the electrolyte. Reactions between these new surface structures and/or reactive oxygen species in the electrolyte can lead to the formation of a cathode electrolyte interphase (CEI) on the surface of the electrode, though the link between CEI composition and the performance of Li-excess materials is not well understood. To bridge this gap in understanding, we use solid-state nuclear magnetic resonance (SSNMR) spectroscopy, dynamic nuclear polarization (DNP) NMR, and electrochemical impedance spectroscopy (EIS) to assess the chemical composition and impedance of the CEI on Li₂RuO₃ as a function of state of charge and cycle number. We show that the CEI that forms on Li₂RuO₃ when cycled in carbonate-containing electrolytes is similar to the solid electrolyte interphase (SEI) that has been observed on anode materials, containing components such as PEO, Li acetate, carbonates, and LiF. The CEI composition deposited on the cathode surface on charge is chemically distinct from that observed upon discharge, supporting the notion of crosstalk between the SEI and the CEI, with Li⁺-coordinating species leaving the CEI during delithiation. Migration of the outer CEI combined with the accumulation of poor ionic conducting components on the static inner CEI may contribute to the loss of performance over time in Li-excess cathode materials.

Mn Ion Dissolution Mechanism for Lithium-Ion Battery with LiMn2O4 Cathode: In Situ Ultraviolet-Visible Spectroscopy and Ab Initio Molecular Dynamics Simulations

The dissolution of transition-metal (TM) cations into a liquid electrolyte from cathode material, such as Mn ion dissolution from LiMn₂O₄ (LMO), is detrimental to the cycling performance of Li-ion batteries (LIBs). Though much attention has been paid to this issue, the behavior of Mn dissolution has not been clearly revealed. In this work, by using a refined in situ ultraviolet-visible (UV-vis) spectroscopy technique, we monitored the concentration changes of dissolved Mn ions in liquid electrolyte from LMO at different state of charge (SOC), confirming the maximum dissolution concentration and rate at 4.3 V charged state and Mn²⁺ as the main species in the electrolyte. Through ab initio molecular dynamics (AIMD) simulations, we revealed that the Mn dissolution process is highly related to surface structure evolution, solvent decomposition, and lithium salt. These results will contribute to understanding TM dissolution mechanisms at working conditions as well as the design of stable cathodes.

Mn2+ or Mn3+ ? Investigating transition metal dissolution of manganese species in lithium ion battery electrolytes by capillary electrophoresis

A new CE method with ultraviolet-visible detection was developed in this study to investigate manganese dissolution in lithium ion battery electrolytes. The aqueous running buffer based on diphosphate showed excellent stabilization of labile Mn³⁺ , even under electrophoretic conditions. The method was optimized regarding the concentration of diphosphate and modifier to obtain suitable signals for quantification. Additionally, the finally obtained method was applied on carbonate-based electrolytes samples. Dissolution experiments of the cathode material LiNi_0.5 Mn_1.5 O₄ (lithium nickel manganese oxide [LNMO]) in aqueous diphosphate buffer at defined pH were performed to investigate the effect of a transition metal-ion-scavenger on the oxidation state of dissolved manganese. Quantification of both Mn species revealed the formation of mainly Mn³⁺ , which can be attributed to a comproportionation reaction of dissolved and complexed Mn²⁺ with Mn⁴⁺ at the surface of the LNMO structure. It was also shown that the formation of Mn³⁺ increased with lower pH. In contrast, dissolution experiments of LNMO in carbonate-based electrolytes containing LIPF₆ showed only dissolution of Mn²⁺ .

Probing the Evolution of Surface Chemistry at the Silicon-Electrolyte Interphase via In Situ Surface-Enhanced Raman Spectroscopy

We present a novel spectroscopic technique for in situ Raman microscopy studies of battery electrodes. By creating nanostructures on a copper mesh current collector, we were able to utilize surface-enhanced Raman spectroscopy (SERS) to monitor the evolution of the silicon anode-electrolyte interphase. The spectra show reversible Si peak intensity changes upon lithiation and delithiation. Moreover, an alkyl carboxylate species, lithium propionate, was detected as a significant SiEI component. Our experimental setup showed reproducible and stable performance over multiple cycles in terms of both electrochemistry and spectroscopy.

Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries

This review article summarizes the current trends and provides guidelines towards next-generation rechargeable lithium and lithium-ion battery chemistries.

Kerr gated Raman spectroscopy of LiPF6 salt and LiPF6-based organic carbonate electrolyte for Li-ion batteries

Fluorescent species are formed during cycling of lithium ion batteries as a result of electrolyte decomposition due to the instability of the non-aqueous electrolytes and side reactions that occur at the electrode surface. The increase in the background fluorescence due to the presence of these components makes it harder to analyse data due to the spectroscopic overlap of Raman scattering and fluorescence. Herein, Kerr gated Raman spectroscopy was shown to be an effective technique for the isolation of the scattering effect from the fluorescence enabling the collection of the Raman spectra of LiPF6 salt and LiPF6-based organic carbonate electrolyte, without the interference of the fluorescence component. Kerr gated Raman was able to identify POF3 on the LiPF6 particle surface, after the addition of trace water.

Tailoring Low-Temperature Performance of a Lithium-Ion Battery via Rational Designing Interphase on an Anode

Performances of lithium-ion batteries at subambient temperatures are extremely restricted by the resistive interphases originated from electrolyte decomposition, especially on the anode surface. This work reports a novel strategy that an anode interphase of low impedance is constructed by applying an electrolyte additive dimethyl sulfite (DMS). Electrochemical measurements indicate that the as-constructed interphase provides graphite/LiNi_0.5Co_0.2Mn_0.3O₂ pouch cells with excellent low-temperature performance, outperforming the interphase constructed by 1,3,2-dioxathiolane 2,2-dioxide (DTD), a common commercially used electrolyte additive. Spectral characterizations in combination with theoretical calculations demonstrate that the improved performance is attributed to the unique molecular structure of DMS, which presents appropriate reduction activity and constructs the more stable and ionically conductive anode interphase due to the weaker combination of its reduction product with lithium ions than DTD. This rational design of interphases via an additive structure has been proven to be a low cost but rather an effective approach to tailor the performances of lithium-ion batteries.

Precise Surface Engineering of Cathode Materials for Improved Stability of Lithium-Ion Batteries

As lithium-ion batteries continue to climb to even higher energy density, they meanwhile cause serious concerns on their stability and reliability during operation. To make sure the electrode materials, particularly cathode materials, are stable upon extended cycles, surface modification becomes indispensable to minimize the undesirable side reaction at the electrolyte-cathode interface, which is known as a critical factor to jeopardizing the electrode performance. This Review is targeted at a precise surface control of cathode materials with focus on the synthetic strategies suitable for a maximized surface protection ensured by a uniform and conformal surface coating. Detailed discussions are taken on the formation mechanism of the designated surface species achieved by either wet-chemistry routes or instrumental ones, with attention to the optimized electrochemical performance as a result of the surface control, accordingly drawing a clear image to describe the synthesis-structure-performance relationship to facilitate further understanding of functional electrode materials. Finally, perspectives regarding the most promising and/or most urgent developments for the surface control of high-energy cathode materials are provided.

Overlooked electrolyte destabilization by manganese (II) in lithium-ion batteries

Transition-metal dissolution from cathode materials, manganese in particular, has been held responsible for severe capacity fading in lithium-ion batteries, with the deposition of the transition-metal cations on anode surface, in elemental form or as chelated-complexes, as the main contributor for such degradations. In this work we demonstrate with diverse experiments and calculations that, besides interfacial manganese species on anode, manganese(II) in bulk electrolyte also significantly destabilizes electrolyte components with its unique solvation-sheath structure, where the decompositions of carbonate molecules and hexafluorophosphate anion are catalyzed via their interactions with manganese(II). The manganese(II)-species eventually deposited on anode surface resists reduction to its elemental form because of its lower electrophilicity than carbonate molecule or anion, whose destabilization leads to sustained consumption. The reveal understanding of the once-overlooked role of manganese-dissolution in electrolytes provides fresh insight into the failure mechanism of manganese-based cathode chemistries, which serves as better guideline to electrolyte design for future batteries.

Mn dissolution is dominantly responsible for capacity fading of most Mn-rich cathodes. Here the authors reveal that soluble Mn²⁺ species significantly destabilizes solvent and anion via its unique solvation sheath structure, providing insight into the failure mechanism of related cathode chemistries.

Ab Initio Modeling of Transition Metal Dissolution from the LiNi0.5Mn1.5O4 Cathode

Irreversible dissolution of transition metals (TMs) from cathode materials in lithium-ion batteries (LIBs) represents a serious challenge for the application of high-energy-density LIBs. Despite substantial improvements achieved by Ni doping of the LiMn₂O₄ spinel, the promising high-voltage LiNi_0.5Mn_1.5O₄ (LNMO) cathode material still suffers from the loss of electro-active materials (Mn and Ni). This process contributes to the formation of solid-electrolyte interfaces and capacity loss severely limiting the battery life cycle. Here, we combine static and ab initio molecular dynamics free energy calculations based on the density functional theory to investigate the mechanism and kinetics of TM dissolution from LNMO into the liquid organic electrolyte. Our calculations help deconvolute the impact of various factors on TM dissolution rates such as the presence of surface protons and oxygen vacancies and the nature of TMs and electrolyte species. The present study also reveals a linear relationship between adsorption strength of the electrolyte species and TM dissolution barriers that should help design electrode/electrolyte interfaces less vulnerable to TM dissolution.

Formation and Effect of Residual Lithium Compounds on Li-Rich Cathode Material Li1.35[Ni0.35Mn0.65]O2

Li-rich cathode materials are regarded as ideal cathode materials, owing to their excellent electrochemical capacity. However, residual lithium compounds, which are formed on the surface of the materials by reacting with moisture and carbon dioxide in ambient atmosphere, can impair the surface structure, injure the capacity, and impede the electrode fabrication using Li-rich materials. Exposure to air atmosphere causes the formation of residual lithium compounds; the formation of such compounds is believed to be related to humidity, temperature, and time during handling and storage. In this study, we demonstrated for the first time an artificial strategy for controlling time, temperature, and humidity to accelerate exposure. The formation and effect of residual lithium compounds on Li-rich cathode material Li_1.35[Ni_0.35Mn_0.65]O₂ were systematically investigated. The residual lithium compounds formed possessed primarily an amorphous structure and were partially coated on the surface. These compounds include LiOH, Li₂O, and Li₂CO₃. Li₂CO₃ is the major component in residual lithium compounds. The presence of residual lithium compounds on the material surface led to a high discharge capacity loss and large discharge voltage fading. Understanding the formation and suppressing the effect of residual lithium compounds will help prevent their unfavorable effects and improve the electrochemical performance.

Operando Investigation into Dynamic Evolution of Cathode-Electrolyte Interfaces in a Li-Ion Battery

While Li-ion battery cathode-electrolyte interfaces (CEIs) have been extensively investigated in recent decades, accurately identifying the chemical nature and tracking the dynamics of the CEIs during electrochemical cycling still remain a grand challenge. Here we report our findings in the investigation into the dynamic evolution of the interface between a LiNi_0.33Co_0.33Mn_0.33O₂ (LNMC) cathode and an ethylene carbonate/dimethyl carbonate (EC/DMC)-based electrolyte using surface-enhanced Raman spectroscopy (SERS) performed on a model cell under typical battery operating conditions. In particular, the strong SERS activity provided by a monolayer of Au nanocubes deposited on a model LNMC electrode (additive-free) enables quasi-quantitative assessment of the CEI evolution during cycling, proving information vital to revealing the dynamics of the species adsorbed on the LNMC surface as a function of cell potential. Furthermore, our theoretical calculation, which is based on the interaction between a model interface-bound molecule and a model LNMC surface, agrees with our experimental observation. The carefully designed operando SERS platform has demonstrated high sensitivity, good surface specificity, and excellent compatibility with extensive electrochemical measurements; it is also applicable to fundamental studies of dynamic interfaces in other electrochemical energy storage and conversion systems.

Lithium anode stable in air for low-cost fabrication of a dendrite-free lithium battery

Lithium metal, the ideal anode material for rechargeable batteries, suffers from the inherent limitations of sensitivity to the humid atmosphere and dendrite growth. Herein, low-cost fabrication of a metallic-lithium anode that is stable in air and plated dendrite-free from an organic-liquid electrolyte solves four key problems that have plagued the development of large-scale Li-ion batteries for storage of electric power. Replacing the low-capacity carbon anode with a safe, dendrite-free lithium anode provides a fast charge while reducing the cost of fabrication of a lithium battery, and increasing the cycle life of a rechargeable cell by eliminating the liquid-electrolyte ethylene-carbonate additive used to form a solid-electrolyte interphase passivation layer on the anode that is unstable during cycling. This solution is accomplished by formation of a hydrophobic solid-electrolyte interphase on a metallic-lithium anode that allows for handling of the treated lithium anode membrane in a standard dry room during cell fabrication.

The lithium metal is a promising anode material for batteries; however, the growth of dendrite and its instability against moisture are two technical challenges. Here the authors address both issues by introducing a bifunctional layer consisting of hydrophobic graphite fluoride and lithium fluoride.

Revealing the Dual Surface Reactions on a HE-NCM Li-Ion Battery Cathode and Their Impact on the Surface Chemistry of the Counter Electrode

The understanding of surface reactions at the electrode-electrolyte interfaces has been a longstanding challenge in Li-ion batteries. X-ray photoemission electron microscopy is used to throw light on the disputed aspects of the surface reactivity of high-energy Li-rich Li_{1+ x}(Ni _aCo _bMn_{1- a-b})_{1- x}O₂ (HE-NCM) cycled in an aprotic electrolyte against Li₄Ti₅O₁₂ (LTO). Despite the highly oxidative potential of 5.1 V vs Li⁺/Li, there is no formation of a layer of oxidized electrolyte byproducts on any of the cathode particles; instead, a homogeneous organic-inorganic layer builds up across the particles of the LTO anode due to the electrolyte and poly(vinylidene fluoride) binder decomposition on HE-NCM. In addition, such a layer incorporates, already from the first charge, micrometer-sized agglomerates of transition metals (TMs). The presence of TMs on the anode is explained by the instability of the reduced Mn, Co, and Ni formed at the surface of HE-NCM mainly during delithiation. The reduced TMs are unstable and prone to be transported to the LTO, where they get further reduced to metallic-like clusters. These results demonstrate that a dual reaction takes place at the HE-NCM-electrolyte interface if subject to high potential, namely, degradation of the surface structure and decomposition of the electrolyte, affecting directly the anode surface through the migration-diffusion processes.

New Insight for Surface Chemistries in Ultra-thin Self-assembled Monolayers Modified High-voltage Spinel Cathodes

The electrochemical properties of the interface between the spinel LiNi_0.5Mn_1.5O_4-δ (LNMO_4-δ) cathodes and ethylene carbonate-dimethyl carbonate (EC-DMC) electrolyte containing 1 M of LiPF₆ have been investigated to achieve high-voltage durability of LNMO_4-δ/graphite full cells. Coating the LNMO_4-δ crystal surface by a fluoroalkylsilane self-assembled monolayer with a thickness below 2 nm resulted in a capacity retention of 94% after 100 cycles at a rate of 1 C and suppression of capacity fading for both the cathode and anode of the full cell. The observed effect is likely caused by the inhibited oxidative decomposition of EC-DMC electrolyte and vinylene carbonate (VC) species at the LNMO_4-δ crystal surface and formation of a stable VC solid electrolyte interface near the anode. Moreover, the results obtained via photoelectron spectroscopy and density-functional calculations revealed that the increase in the work function of the LNMO_4-δ crystal surface due to the formation of Si-O-Mn species primary contributed to the inhibition of the oxidative decomposition of the electrolyte and VC molecules at the cathode/electrolyte interface.

Operando and three-dimensional visualization of anion depletion and lithium growth by stimulated Raman scattering microscopy

Visualization of ion transport in electrolytes provides fundamental understandings of electrolyte dynamics and electrolyte-electrode interactions. However, this is challenging because existing techniques are hard to capture low ionic concentrations and fast electrolyte dynamics. Here we show that stimulated Raman scattering microscopy offers required resolutions to address a long-lasting question: how does the lithium-ion concentration correlate to uneven lithium deposition? In this study, anions are used to represent lithium ions since their concentrations should not deviate for more than 0.1 mM, even near nanoelectrodes. A three-stage lithium deposition process is uncovered, corresponding to no depletion, partial depletion, and full depletion of lithium ions. Further analysis reveals a feedback mechanism between the lithium dendrite growth and heterogeneity of local ionic concentration, which can be suppressed by artificial solid electrolyte interphase. This study shows that stimulated Raman scattering microscopy is a powerful tool for the materials and energy field.

The relationship between Li-ion concentration and Li deposition remains an issue to be addressed. Here the authors show that stimulated Raman scattering microscopy offers insight into the concentration evolution and its impact on the dendrite growth, which is not possible by existing techniques.

Construction of Uniform Cobalt-Based Nanoshells and Its Potential for Improving Li-Ion Battery Performance

Surface cobalt doping is an effective and economic way to improve the electrochemical performance of cathode materials. Herein, by tuning the precipitation kinetics of Co²⁺, we demonstrate an aqueous-based protocol to grow uniform basic cobaltous carbonate coating layer onto different substrates, and the thickness of the coating layer can be adjusted precisely in nanometer accuracy. Accordingly, by sintering the cobalt-coated LiNi_0.5Mn_1.5O₄ cathode materials, an epitaxial cobalt-doped surface layer will be formed, which will act as a protective layer without hindering charge transfer. Consequently, improved battery performance is obtained because of the suppression of interfacial degradation.

Electrochemical and Electronic Charge Transport Properties of Ni-Doped LiMn₂O₄ Spinel Obtained from Polyol-Mediated Synthesis

LiNi_0.5Mn_1.5O₄ (LNMO) spinel has been extensively investigated as one of the most promising high-voltage cathode candidates for lithium-ion batteries. The electrochemical performance of LNMO, especially its rate performance, seems to be governed by its crystallographic structure, which is strongly influenced by the preparation methods. Conventionally, LNMO materials are prepared via solid-state reactions, which typically lead to microscaled particles with only limited control over the particle size and morphology. In this work, we prepared Ni-doped LiMn₂O₄ (LMO) spinel via the polyol method. The cycling stability and rate capability of the synthesized material are found to be comparable to the ones reported in literature. Furthermore, its electronic charge transport properties were investigated by local electrical transport measurements on individual particles by means of a nanorobotics setup in a scanning electron microscope, as well as by performing DFT calculations. We found that the scarcity of Mn³⁺ in the LNMO leads to a significant decrease in electronic conductivity as compared to undoped LMO, which had no obvious effect on the rate capability of the two materials. Our results suggest that the rate capability of LNMO and LMO materials is not limited by the electronic conductivity of the fully lithiated materials.