Fluorescent Photoswitchable Diarylethenes for Biolabeling and Single-Molecule Localization Microscopies with Optical Superresolution

Photoswitchable Fluorescent Hydrazone for Super-Resolution Cell Membrane Imaging

Advancing the field of super-resolution microscopy will require the design and optimization of new molecular probes whose emission can be toggled "ON" and "OFF" using light. Recently, we reported on a hydrazone photochrome (1) whose emission can be photoswitched on demand, although its low brightness and UV light-dependent back isomerization limited its use in such applications. Here, we report on the optimization of this parent fluorophore by replacing its dimethylamine electron-donating group with conformationally more rigid groups, namely, azetidine (2), 3,3-difluoroazetidine (3), and julolidine (4). This structural change resulted in enhanced brightness (i.e., extinction coefficient multiplied by fluorescence quantum yield), specifically in 4 because of its rigidity and ED capability. Next, three electron push-pull hydrazones (5-7) were designed based on the scaffold of 4, using cyano, nitro, or dicyanovinyl, respectively, as the electron-withdrawing groups, resulting in the progressive red-shifting of the photoswitching wavelengths into the visible region and further enhancement in brightness. Finally, fluorogenic probe 8 was developed based on parent compound 7, which could be activated solely with visible light and used in the super-resolution imaging of fixed-cell and live-cell plasma membranes with average localization precisions of 17 and 25 nm, respectively.

Dual AIE and Visible-Light-Driven Photoswitchable Polymer for Super-resolution Imaging

Photochromic polymers and aggregation-induced emission (AIE) materials show great potential for many applications. To explore the synergy of both characteristics in polymer material areas, we reported the first synthesis of tetraphenylethylene (TPE)-diarylethene (DAE) polymer and its application as a super-resolution probe for imaging self-assembled cylindrical micelles of PSt38k-b-PEO11k. The polymer exhibits high fluorescence ON/OFF ratios, visible-light-driven photocycloreversion, and AIE properties. Compared with other DAE materials studied in super-resolution imaging, our polymer shows advantages of visible-light-driven photocycloreversion, higher resolution, higher fluorescence quantum yield, or higher thermal stability.

Synthesis and photochromism of a turn-on fluorescent diarylethene having benzo[b]selenophene groups as the aryl units

Herein, we report the synthesis of a novel diarylethene derivative, which has benzo[b]selenophene groups as the aryl units, and its photochromic properties. The derivative exhibited a unique turn-on mode fluorescence photoswitching along with photochromic reactions in solution as well as in solid powder states.

Tale of Three Dithienylethenes: Following the Photocycloreversion with Ultrafast Spectroscopy and Quantum Dynamics Simulations

Photocycloreversion reactions of three diarylethene derivatives whose structures differ only in the placement of two sulfur atoms in the cyclopentene rings are investigated. Despite the minuscule differences between the molecules, both the yields and times of the photoreactions vary considerably. Using UV-vis and infrared femtosecond spectroscopy and quantum chemical dynamics simulations, we elucidate the relationships among the quantum yield, electronic and vibrational relaxation time, and structural properties of the dithienylethene photoswitches. We show that the local aromaticity of the molecule's central ring could be one of the predictors of the quantum yield and the rate of cycloreversion. While from the perspective of electronic dynamics, the cycloreversion is completed within a few picoseconds at most, all three derivatives exhibit much longer (10-25 ps) nuclear rearrangement times that determine the actual times of stable photoproduct formation.

Recent Progress of Photoswitchable Fluorescent Diarylethenes for Bioimaging

Photochromic diarylethene has attracted broad research interest in optical applications owing to its excellent fatigue resistance and unique bistability. Photoswitchable fluorescent diarylethene become a powerful molecular tool for fluorescence imaging recently. Herein, the recent progress on photoswitchable fluorescent diarylethenes in bioimaging is reviewed. We summarize the structures and properties of diarylethene fluorescence probes and emphatically introduce their applications in bioimaging as well as super-resolution imaging. Additionally, we highlight the current challenges in practical applications and provide the prospects of the future development directions of photoswitchable fluorescent diarylethene in the field of bioimaging. This comprehensive review aims to stimulate further research into higher-performance photoswitchable fluorescent molecules and advance their progress in biological application.

A Hexaarylbiimidazole-Terarylene Hybrid: Visible-to-NIR-II Absorption via Sequential Photochromic Reactions

A synergetic interaction between two or more photochromic chromophores has a potential to achieve advanced photochemical properties beyond conventional photochromic molecules and to realize photochemical control of complex systems using only a single molecule. Herein, we report a hybrid photochromic molecule consisting of hexaarylbiimidazole (HABI) and terarylene that exhibits multi-state photochromism. The biphotochrome hybrid shows four-state photochromic reaction involving sequentially proceeding photoreactions. The UV or visible light irradiation to the biphotochrome leads to the C-N bond breaking reaction of the HABI in preference to the ring-closing reaction of the 6π-electron system in the terarylene unit, leading to two terarylene radical molecules. The photogenerated terarylene radical further exhibits the 6π-electrocyclization reaction by UV irradiation. The delocalized π-radical on the closed-ring form of the terarylene is efficient to enhance the photosensitivity to the NIR-I and -II region. Furthermore, a recombination reaction of radicals between the open- and closed-ring isomers of terarylene affords an unprecedented photochromic dimer as a structural isomer of the initial molecule. This is a consequence of the sequential hybrid photochromic system involving the HABI and terarylene units.

Molecular probes for super-resolution imaging of drug dynamics

Super-resolution molecular probes (SRMPs) are essential tools for visualizing drug dynamics within cells, transcending the resolution limits of conventional microscopy. In this review, we provide an overview of the principles and design strategies of SRMPs, emphasizing their role in accurately tracking drug molecules. By illuminating the intricate processes of drug distribution, diffusion, uptake, and metabolism at a subcellular and molecular level, SRMPs offer crucial insights into therapeutic interventions. Additionally, we explore the practical applications of super-resolution imaging in disease treatment, highlighting the significance of SRMPs in advancing our understanding of drug action. Finally, we discuss future perspectives, envisioning potential advancements and innovations in this field. Overall, this review serves to inform and practitioners about the utility of SRMPs in driving innovation and progress in pharmacology, providing valuable insights for drug development and optimization.

Recent Development of Photochromic Polymer Systems: Mechanism, Materials, and Applications

Photochromic polymer is defined as a series of materials based on photochromic units in polymer chains, which produces reversible color changes under irradiation with a particular wavelength. Currently, as the research progresses, it shows increasing potential applications in various fields, such as anti-counterfeiting, information storage, super-resolution imaging, and logic gates. However, there is a paucity of published reviews on the topic of photochromic polymers. Herein, this review discusses and summarizes the research progress and prospects of such materials, mainly summarizing the basic mechanisms, classification, and applications of azobenzene, spiropyran, and diarylethene photochromic polymers. Moreover, 3-dimensional (3D) printable photochromic polymers are worthy to be summarized specifically because of its innovative approach for practical application; meanwhile, the developing 3D printing technology has shown increasing potential opportunities for better applications. Finally, the current challenges and future directions of photochromic polymer materials are summarized.

Near-infrared two-photon absorption and excited state dynamics of a fluorescent diarylethene derivative

Near-infrared two-photon absorption and excited state dynamics of a fluorescent diarylethene (fDAE) derivative were investigated by time-resolved absorption and fluorescence spectroscopies. Prescreening with quantum chemical calculation predicted that a derivative with methylthienyl groups (mt-fDAE) in the closed-ring isomer has a two-photon absorption cross-section larger than 1000 GM, which was experimentally verified by Z-scan measurements and excitation power dependence in transient absorption. Comparison of transient absorption spectra under one-photon and simultaneous two-photon excitation conditions revealed that the closed-ring isomer of mt-fDAE populated into higher excited states deactivates following three pathways on a timescale of ca. 200 fs: (i) the cycloreversion reaction more efficient than that by the one-photon process, (ii) internal conversion into the S1 state, and (iii) relaxation into a lower state (S1' state) different from the S1 state. Time-resolved fluorescence measurements demonstrated that this S1' state is relaxed to the S1 state with the large emission probability. These findings obtained in the present work contribute to extension of the ON-OFF switching capability of fDAE to the biological window and application to super-resolution fluorescence imaging in a two-photon manner.

Enhanced fluorescence blinking of AF647 fluorophores in Mowiol via violet and UV light induced recovery for superior localization microscopy

Blinking of fluorophores is essential in the context of single molecule localization-based optical super-resolution microscopy methods. To make the fluorescence molecule undergo blinking specific complex chemical mounting buffer systems, combined with suitable oxygen scavengers, and reducing agents are required. For instance to realise blinking in widely used fluorescence tags, like Alexa Fluor 647 (AF647), they are to be mounted on anti-fading buffer such as Mowiol and reducing agent such as Beta (β) - ME. However, the quality of the super-resolved images is decided by the total number of blinking events or in other words net duration for which the fluorescence blinking persists. In this paper we investigate how a violet and UV light induced fluorescence recovery mechanism can enhance the duration of fluorescence blinking. Our study uses AF647 dye conjugated with Phalloidin antibody in U87MG cell line mounted on Mowiol andβ- ME. On the basis of the investigation we optimize the intensity, at the sample plane, of fluorescence excitation laser at 638 nm and fluorescence recovery beam at 405 nm or in the UV giving the maximum possible fluorescence blinking duration. We observe that the longer blinking duration, using the optimized illumination scheme, has brought down the resolution in the super-resolved image, as given by Fourier Ring Correlation method, from 168 nm to 112 nm, while the separation between two nearby resolvable filaments has been brought down to ≤ 60 nm.

Amplifying dual-visible-light photoswitching in aqueous media via confinement promoted triplet-triplet energy transfer

Achieving visible-light photochromism is a long-term goal of chemists keen to exploit the opportunities of molecular photoswitches in multi-disciplinary research studies. Triplet-sensitization offers a flexible approach to building diverse visible-light photoswitches using existing photochromic scaffolds, circumventing the need for sophisticated molecular design and synthesis. Unfortunately, distance-dependence and environment-sensitivity of triplet-excited species remain as key challenges that severely impair sensitization efficiency and limit their practical availability. We present herein a nature-inspired nanoconfinement strategy in which a triplet-sensitized visible-light photoswitch/sensitizer system is assembled into nanoconfined micelles (d ∼ 40 nm). A ca. 10-fold efficiency increase of triplet-triplet energy transfer for photochromism as well as an amplified fluorescence on/off contrast upon bi-directional visible-light excitation (470/560 nm) was achieved in full aqueous media. By virtue of this, the hybrid photoswitchable system is successfully applied for both flash information encryption and multiple dynamic cell imaging assays, further proving its versatility in materials and life science.

Photoswitchable polyynes for multiplexed stimulated Raman scattering microscopy with reversible light control

Optical imaging with photo-controllable probes has greatly advanced biological research. With superb chemical specificity of vibrational spectroscopy, stimulated Raman scattering (SRS) microscopy is particularly promising for super-multiplexed optical imaging with rich chemical information. Functional SRS imaging in response to light has been recently demonstrated, but multiplexed SRS imaging with reversible photocontrol remains unaccomplished. Here, we create a multiplexing palette of photoswitchable polyynes with 16 Raman frequencies by coupling asymmetric diarylethene with super-multiplexed Carbow (Carbow-switch). Through optimization of both electronic and vibrational spectroscopy, Carbow-switch displays excellent photoswitching properties under visible light control and SRS response with large frequency change and signal enhancement. Reversible and spatial-selective multiplexed SRS imaging of different organelles are demonstrated in living cells. We further achieve photo-selective time-lapse imaging of organelle dynamics during oxidative stress and protein phase separation. The development of Carbow-switch for photoswitchable SRS microscopy will open up new avenues to study complex interactions and dynamics in living cells with high spatiotemporal precision and multiplexing capability.

Theranostic Fluorescent Probes

The ability to gain spatiotemporal information, and in some cases achieve spatiotemporal control, in the context of drug delivery makes theranostic fluorescent probes an attractive and intensely investigated research topic. This interest is reflected in the steep rise in publications on the topic that have appeared over the past decade. Theranostic fluorescent probes, in their various incarnations, generally comprise a fluorophore linked to a masked drug, in which the drug is released as the result of certain stimuli, with both intrinsic and extrinsic stimuli being reported. This release is then signaled by the emergence of a fluorescent signal. Importantly, the use of appropriate fluorophores has enabled not only this emerging fluorescence as a spatiotemporal marker for drug delivery but also has provided modalities useful in photodynamic, photothermal, and sonodynamic therapeutic applications. In this review we highlight recent work on theranostic fluorescent probes with a particular focus on probes that are activated in tumor microenvironments. We also summarize efforts to develop probes for other applications, such as neurodegenerative diseases and antibacterials. This review celebrates the diversity of designs reported to date, from discrete small-molecule systems to nanomaterials. Our aim is to provide insights into the potential clinical impact of this still-emerging research direction.

High-contrast multicolour photoswitching based on dithienylethene Schiff base with a hydrazinylquinoline moiety

A new asymmetrical photochromic diarylethene DTE-HQo composed of a 2-hydrazinoquinoline moiety as the binding unit for ions and dithenylethene as a photoswitching trigger was reported. DTE-HQo displayed favourable photochromism upon irradiation with UV/vis light. Its fluorescent behaviour could be efficiently modulated by light, Zn2+, Cd2+ and HSO4-. The binding of Zn2+ induced a strong fluorescence peak at 510 nm in DTE-HQo due to the formation of a 1:2 complex [Zn2+ + 2DTE-HQo], resulting in a notable colour change from dark to intense white emission. Triggered by Cd2+, DTE-HQo formed a 1:1 complex [Cd2+ + DTE-HQo], leading to an enhanced emission intensity by 21-fold with an emission peak red-shifted from 461 nm to 514 nm. Unexpectedly, [Zn2+ + 2DTE-HQo] underwent hydrolysis when stimulated with water, generating a yellow-emitting complex [Zn2+ + DTE-HQo]. This color change easily distinguishes it from Cd2+ complex. Additionally, DTE-HQo showed high selectivity towards HSO4- and exhibited distinct "turn-on" fluorescence with a colour change from dark to bright blue upon stimulation. Moreover, the strong emission complexes of DTE-HQo with Zn2+, Cd2+ and HSO4- could be effectively quenched during the photocyclization process. Therefore, DTE-HQo can serve as an unimolecular multicolour photoswitching chemosensor, offering potential applications as a multifunctional probe for detecting Zn2+, Cd2+ and HSO4-.

Photochromic Nucleosides and Oligonucleotides

Photochromism is a reversible phenomenon wherein a material undergoes a change in color upon exposure to light. In organic photochromes, this effect often results from light-induced isomerization reactions, leading to alterations in either the spatial orientation or electronic properties of the photochrome. The incorporation of photochromic moieties into biomolecules, such as proteins or nucleic acids, has become a prevalent approach to render these biomolecules responsive to light stimuli. Utilizing light as a trigger for the manipulation of biomolecular structure and function offers numerous advantages compared to other stimuli, such as chemical or electrical treatments, due to its non-invasive nature. Consequently, light proves particularly advantageous in cellular and tissue applications. In this review, we emphasize recent advancements in the field of photochromic nucleosides and oligonucleotides. We provide an overview of the design principles of different classes of photochromes, synthetic strategies, critical analytical challenges, as well as structure-property relationships. The applications of photochromic nucleic acid derivatives encompass diverse domains, ranging from the precise photoregulation of gene expression to the controlled modulation of the three-dimensional structures of oligonucleotides and the development of DNA-based fluorescence modulators. Moreover, we present a future perspective on potential modifications and applications.

Towards Optical Information Recording: A Robust Visible-Light-Driven Molecular Photoswitch with the Ring-Closure Reaction Yield Exceeding 96.3

Diarylethene molecular photoswitches hold great fascination as optical information materials due to their unique bistability and exceptional reversible photoswitching properties. Conventional diarylethenes, however, rely on UV light for ring-closure reactions, typically with modest yields. For practical application, diarylethenes driven by visible lights are preferred but achieving high ring-closure reaction yield remains a significant challenge. Herein, we synthesized a novel all-visible-light-driven photoswitch, TPAP-DTE, by facilely endcapping the dithienylethene (DTE) core with triphenylamine phenyl (TPAP) groups. Owing to the electron-donating conjugation effect of TPAP, the open-form TPAP-DTE responds strongly to short-wavelength visible lights with considerable photocyclization quantum yields and molar absorption coefficient. Upon 405 nm visible-light irradiation, TPAP-DTE achieves a ring-closure reaction yield exceeding 96.3 % (confirmed by both nuclear magnetic resonance spectroscopy and high-performance liquid chromatography). Its ring-opening reaction yield is 100 % upon irradiation with long-wavelength visible light. TPAP-DTE could be regarded as a bidirectional "quasi"-quantitative conversion molecular switch. Furthermore, TPAP-DTE exhibits robust fatigue resistance over 100 full photoswitching cycles and great anti-aging property under 85 °C and 85 % humidity for at least 1000 h. Consequently, its rewritable QR-code, multilevel data storage, and anti-counterfeiting/encryption applications are successfully demonstrated exclusively using visible lights, positioning TPAP-DTE as a highly promising medium for information recording.

Degradation of reactive red 198 dye from aqueous solutions by combined technology advanced sonofenton with zero valent iron: Characteristics/ effect of parameters/kinetic studies

Dyes are one of the most common contaminants in industrial effluents, whose continuous release into the environment has become an increasing global concern. In this work, nanoparticles of zero-valent iron (NZVI) were synthesized using the chemical regeneration method ،and were utilized for the first time as a catalyst in the advanced Sono-Nano-Fenton hybrid method for the decomposition of Reactive Red 198 (RR198). The properties of zero-valent iron nanoparticles were analyzed using SEM and XRD. The effect of pH, initial dye concentration, nanoparticle dosage, zero-valent iron and H2O2 concentration on the decomposition efficiency of Red Reactive 198 was investigated. Comparing the efficiency of Reactivate 198 dye degradation in Sonolysis, Sono-NZVI, Sono-H2O2 and Sono-Nano Fenton processes showed that 97 % efficiency was achieved by the Sono-Nano Fenton process in 60 min. The kinetics of the removal process showed that this process follows pseudo-first-order kinetics and the Langmuir-Hinshelwood model. The results indicate that the effectiveness of the ultrasonic process in removing resistant organic pollutants such as dyes increases tremendously with the synergy of the Fenton process.

Synchronous Photoactivation-Imaging Fluorophores Break Limitations of Photobleaching and Phototoxicity in Live-cell Microscopy

Fluorescence microscopy is one of the most important tools in the studies of cell biology and many other fields, but two fundamental issues, photobleaching and phototoxicity, associated with the fluorophores have still limited its use for long-term and strong-illumination imaging of live cells. Here, we report a new concept of fluorophore engineering chemistry, synchronous photoactivation-imaging (SPI) fluorophores, activating and exciting fluorophores by a single light source to thus avoid the repeated switches between activation and excitation lights. The chemically reconstructed, nonemissive fluorophores can be photolyzed to allow continuous replenishing of "bright-state" probes detectable by standard fluorescent microscopes in the imaging process so as to bypass the photobleaching barrier to greatly extend the imaging period. Equally importantly, SPI fluorophores substantially reduce photocytotoxicity due to the scavenging of reactive oxygen species (ROS) by a photoactivable group and the slow release of "bright-state" probes to minimize ROS generation. Using SPI fluorophores, the time-lapsed confocal (>16 h) and super-resolution (>3 h) imaging of subcellular organelles under intensive illumination (50 MW/cm2) were achieved in live cells.

2,3-Diarylmaleate salts as a versatile class of diarylethenes with a full spectrum of photoactivity in water

There is incessant interest in the transfer of common chemical processes from organic solvents to water, which is vital for the development of bioinspired and green chemical technologies. Diarylethenes feature a rich photochemistry, including both irreversible and reversible reactions that are in demand in organic synthesis, materials chemistry, and photopharmacology. Herein, we introduce the first versatile class of diarylethenes, namely, potassium 2,3-diarylmaleates (DAMs), that show excellent solubility in water. DAMs obtained from highly available precursors feature a full spectrum of photoactivity in water and undergo irreversible reactions (oxidative cyclization or rearrangement) or reversible photocyclization (switching), depending on their structure. This finding paves a way towards wider application of diarylethenes in photopharmacology and bioinspired technologies that require aqueous media for photochemical reactions.

How do donor and acceptor substituents change the photophysical and photochemical behavior of dithienylethenes? The search for a water-soluble visible-light photoswitch

Dithienylethenes are a type of diarylethene and they constitute one of the most widely studied classes of photoswitch, yet there have been no systematic studies of how electron-donor or -acceptor substituents affect their properties. Here we report eight dithienylethenes bearing push-push, pull-pull and push-pull substitution patterns with different lengths of conjugation in the backbone and investigate their photophysical and photochemical properties. Donor-acceptor interactions in the closed forms of push-pull dithienylethenes shift their absorption spectra into the near-infrared region (λmax ≈ 800 nm). The push-pull systems also exhibit low quantum yields for photochemical electrocyclization, and computational studies indicate that this can be attributed to stabilization of the parallel, rather than anti-parallel, conformations. The pull-pull systems have the highest quantum yields for switching in both directions, ring-closure and ring-opening. The chloride salt of a pull-pull DTE, with alkynes on both arms, is the first water-soluble dithienylethene that can achieve >95% photostationary state distribution in both directions with visible light. It has excellent fatigue resistance: in aqueous solution on irradiation at 365 nm, the photochemical quantum yields for switching and decomposition are 0.15 and 2.6 × 10-5 respectively, i.e. decomposition is more than 5000 times slower than photoswitching. These properties make it a promising candidate for biological applications such as super-resolution microscopy and photopharmacology.

Bioorthogonal Caging-Group-Free Photoactivatable Probes for Minimal-Linkage-Error Nanoscopy

Here we describe highly compact, click compatible, and photoactivatable dyes for super-resolution fluorescence microscopy (nanoscopy). By combining the photoactivatable xanthone (PaX) core with a tetrazine group, we achieve minimally sized and highly sensitive molecular dyads for the selective labeling of unnatural amino acids introduced by genetic code expansion. We exploit the excited state quenching properties of the tetrazine group to attenuate the photoactivation rates of the PaX, and further reduce the overall fluorescence emission of the photogenerated fluorophore, providing two mechanisms of selectivity to reduce the off-target signal. Coupled with MINFLUX nanoscopy, we employ our dyads in the minimal-linkage-error imaging of vimentin filaments, demonstrating molecular-scale precision in fluorophore positioning.

Non-Conjugated Bis-(Dithienylethene)-Naphthalenediimide as a Dynamic Anti-Counterfeiting Agent: Driving the Wheel of Photoswitching Enactment

Photochromic fluorescent molecules dramatically extend their fields of applications ranging from optical memories, bioimaging, photoswitches, photonic devices, anti-counterfeiting technology and many more. Here, we have logically designed and synthesized a triazole appended bis-(dithienylethene)-naphthalenediimide based photo-responsive material, 5, which demonstrated fluorescence enhancement property upon photocyclization (ΦF =0.42), with high photocyclization (44 s, ksolution =0.0355 s-1 , ksolid =0.0135 s-1 ) and photocycloreversion (160 s, ksolution =0.0181 s-1 , ksolid =0.0085 s-1 ) rate and decent photoreaction quantum yield (Φo→c =0.93 and Φc→o =0.11). The open isomer almost converted to the closed isomer at photo-stationary state (PSS) with distinct color change from colorless to blue with 92.85 % conversion yield. A reversible noninvasive modulation of fluorescence through efficient photoinduced electron transfer (PET) process was observed both in solution as well as in solid state. The fluorescence modulation through PET process was further corroborated with thermodynamic calculations using the Rehm-Weller equation and quantum chemical studies (DFT). The thermally stable compound 5 exhibits high fatigue resistance property (up to 50 cycles) both in solution and solid state. Furthermore, the compound 5 was successfully applied as erasable ink and in deciphering secret codes (Quick Response/bar code) portending potential promising application in anti-counterfeiting.

Light-regulating chirality of metallacages featuring dithienylethene switches

Dynamic chiral superstructures are of vital importance for understanding the organization and function of chirality in biological systems. However, achieving high conversion efficiency for photoswitches in nanoconfined architectures remains challenging but fascinating. Herein, we report a series of dynamic chiral photoswitches based on supramolecular metallacages through the coordination-driven self-assembly of dithienylethene (DTE) units and octahedral zinc ions, thereby successfully achieving an ultrahigh photoconversion yield of 91.3% in nanosized cavities with a stepwise isomerization mechanism. Interestingly, the chiral inequality phenomenon is observed in metallacages, resulting from the intrinsic photoresponsive chirality in the closed form of the dithienylethene unit. Upon hierarchical organization, we establish a dynamic chiral system at the supramolecular level, featuring chiral transfer, amplification, induction, and manipulation. This study provides an intriguing idea to simplify and understand chiral science.

Photoresponsive Diarylethene-Containing Polymers: Recent Advances and Future Challenges

Photoresponsive polymers have attracted increasing interest owing to their potential applications in anticounterfeiting, information encryption, adhesives, etc. Among them, diarylethene (DAE)-containing polymers are one of the most promising photoresponsive polymers and have unique thermal stability and fatigue resistance compared to azobenzene- and spiropyran-containing polymers. Herein, the design of DAE-containing polymers based on different types of structures, including main chain polymers, side-chain polymers, and crosslinked polymers, is introduced. The mechanism and applications of DAE-containing polymers in anti-counterfeiting, information encryption, light-controllable adhesives, and photoinduced healable materials are reviewed. In addition, the remaining challenges of DAE-containing polymers are also discussed.

All Visible Light Photoswitch Based on the Dimethyldihydropyrene Unit Operating in Aqueous Solutions with High Quantum Yields

Molecular systems and devices whose properties can be modulated using light as an external stimulus are the subject of numerous research studies in the fields of materials and life sciences. In this context, the use of photochromic compounds that reversibly switch upon light irradiation is particularly attractive. However, for many envisioned applications, and in particular for biological purposes, illumination with harmful UV light must be avoided and these photoactivable systems must operate in aqueous media. In this context, we have designed a benzo[e]-fused dimethyldihydropyrene compound bearing a methyl-pyridinium electroacceptor group that meets these requirements. This compound (closed state) is able to reversibly isomerize under aerobic conditions into its corresponding cyclophanediene form (open isomer) through the opening of its central carbon-carbon bond. Both the photo-opening and the reverse photoclosing processes are triggered by visible light illumination and proceed with high quantum yields (respectively 14.5% yield at λ = 680 nm and quantitative quantum yield at λ = 470 nm, in water). This system has been investigated by nuclear magnetic resonance and absorption spectroscopy, and the efficient photoswitching behavior was rationalized by spin-flip time-dependent density functional theory calculations. In addition, it is demonstrated that the isomerization from the open to the closed form can be electrocatalytically triggered.

Small-molecule photoswitches for fluorescence bioimaging: engineering and applications

Fluorescence microscopy has revolutionised our understanding of biological systems, enabling the visualisation of biomolecular structures and dynamics in complex systems. The possibility to reversibly control the optical or biochemical properties of fluorophores can unlock advanced applications ranging from super-resolution microscopy to the design of multi-stimuli responsive and functional biosensors. In this Highlight, we review recent progress in small-molecule photoswitches applied to biological imaging with an emphasis on molecular engineering strategies and promising applications, while underlining the main challenges in their design and implementation.

Photochemical Mechanisms of Fluorophores Employed in Single-Molecule Localization Microscopy

Decoding cellular processes requires visualization of the spatial distribution and dynamic interactions of biomolecules. It is therefore not surprising that innovations in imaging technologies have facilitated advances in biomedical research. The advent of super-resolution imaging technologies has empowered biomedical researchers with the ability to answer long-standing questions about cellular processes at an entirely new level. Fluorescent probes greatly enhance the specificity and resolution of super-resolution imaging experiments. Here, we introduce key super-resolution imaging technologies, with a brief discussion on single-molecule localization microscopy (SMLM). We evaluate the chemistry and photochemical mechanisms of fluorescent probes employed in SMLM. This Review provides guidance on the identification and adoption of fluorescent probes in single molecule localization microscopy to inspire the design of next-generation fluorescent probes amenable to single-molecule imaging.

Long-Wavelength Photoconvertible Dimeric BODIPYs for Super-Resolution Single-Molecule Localization Imaging in Near-Infrared Emission

Sulfoxide-bridged dimeric BODIPYs were developed as a new class of long-wavelength photoconvertible fluorophores. Upon visible-light irradiation, a sulfoxide moiety was released to generate the corresponding α,α-directly linked dimeric BODIPYs. The extrusion of SO from sulfoxides was mainly through an intramolecular fashion involving reactive triplet states. By this photoconversion, not only were more than 100 nm red shifts of absorption and emission maxima (up to 648/714 nm) achieved but also stable products with bright fluorescence were produced with high efficiency. The combination of photoactivation and red-shifted excitation/emission offered optimal contrast and eliminated the interference from biological autofluorescence. More importantly, the in situ products of these visible-light-induced reactions demonstrated ideal single-molecule fluorescence properties in the near-infrared region. Therefore, this new photoconversion could be a powerful photoactivation method achieving super-resolution single-molecule localization imaging in a living cell without using UV illumination and cell-toxic additives.

Light-Stimulated Luminescence Control of Lead Halide-Based Perovskite Nanocrystals Coupled with Photochromic Molecules via Electron and Energy Transfer

Photoswitchable nanomaterials are key materials in the development of advanced imaging techniques, such as super-resolution fluorescence microscopy. The combination of perovskite CsPbBr₃ nanocrystals (NCs) with bright photoluminescence (PL) emission and diarylethenes (DAEs) with structural changes in response to ultraviolet (UV) and visible light is a promising candidate system. Herein, CsPbBr₃ NCs are coupled with photochromic DAE molecules to control the PL emission from the NCs by light stimulation. The PL emission is successfully switched ON and OFF by alternating UV and visible light irradiation. Time-resolved PL emission studies suggest that Förster resonance energy transfer from CsPbBr₃ NCs to the closed-ring form of DAE occurs after UV irradiation, and the PL emission is quenched. Upon visible-light irradiation, DAE is converted to the open-ring isomer, and the PL emission is restored. Femtosecond pump-probe spectroscopy reveals that light stimulation induces not only energy transfer but also photoinduced electron transfer in the NC-DAE pair on the picosecond timescale to form DAE radicals. Thus, it is suggested that the holes residing in the NCs react with the NCs, degrading the PL emission. Stable PL switching is realized using 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) as a hole scavenger to avoid the reaction between the holes and NCs.

Unsymmetrical benzothiazole-based dithienylethene photoswitches

Herein, we investigate the structure-property relationships in a new series of benzothiazole based unsymmetrical hexafluorocyclopentene dithienylethenes (DTEs) and compare the results with the known facts for symmetric diarylethenes (DAEs). We reveal high photocyclization efficiency resulting from a significant shift of ground state equilibrium to the antiparallel conformation and a barrierless excited state pathway to conical intersection, which remains unperturbed even in polar solvents for most of the prepared DTEs. Furthermore, we uncover that the rate of back thermal cycloreversion correlates clearly more with the central C-C bond-length in the transition state than with the central C-C bond-length in the ground state of the cyclic form. Finally, our detailed vibrational spectral analysis of studied DTEs points out significant changes in Raman and infrared spectra during photoswitching cycles which pave the way for a non-destructive readout of stored information.

Stepping Out of the Blue: From Visible to Near-IR Triggered Photoswitches

Light offers unique opportunities for controlling the activity of materials and biosystems with high spatiotemporal resolution. Molecular photoswitches are chromophores that undergo reversible isomerization between different states upon irradiation with light, allowing a convenient means to control their influence over the system of interest. However, a significant limitation of classical photoswitches is the requirement to initiate the switching in one or both directions using deleterious UV light with poor tissue penetration. Red-shifted photoswitches are hence in high demand and have attracted keen recent research interest. In this Review, we highlight recent progress towards the development of visible- and NIR-activated photoswitches characterized by distinct photochromic reaction mechanisms. We hope to inspire further endeavors in this field, allowing the full potential of these tools in biotechnology and materials chemistry applications to be realized.

Supramolecular Complex of Photochromic Diarylethene and Cucurbit[7]uril: Fluorescent Photoswitching System for Biolabeling and Imaging

Photoswitchable fluorophores—proteins and synthetic dyes—whose emission is reversibly switched on and off upon illumination, are powerful probes for bioimaging, protein tracking, and super-resolution microscopy. Compared to proteins, synthetic dyes are smaller and brighter, but their photostability and the number of achievable switching cycles in aqueous solutions are lower. Inspired by the robust photoswitching system of natural proteins, we designed a supramolecular system based on a fluorescent diarylethene (DAE) and cucurbit[7]uril (CB7) (denoted as DAE@CB7). In this assembly, the photoswitchable DAE molecule is encapsulated by CB7 according to the host–guest principle, so that DAE is protected from the environment and its fluorescence brightness and fatigue resistance in pure water improved. The fluorescence quantum yield (Φ_fl) increased from 0.40 to 0.63 upon CB7 complexation. The photoswitching of the DAE@CB7 complex, upon alternating UV and visible light irradiations, can be repeated 2560 times in aqueous solution before half-bleaching occurs (comparable to fatigue resistance of the reversibly photoswitchable proteins), while free DAE can be switched on and off only 80 times. By incorporation of reactive groups [maleimide and N-hydroxysuccinimidyl (NHS) ester], we prepared bioconjugates of DAE@CB7 with antibodies and demonstrated both specific labeling of intracellular proteins in cells and the reversible on/off switching of the probes in cellular environments under irradiations with 355 nm/485 nm light. The bright emission and robust photoswitching of DAE-Male3@CB7 and DAE-NHS@CB7 complexes (without exclusion of air oxygen and addition of any stabilizing/antifading reagents) enabled confocal and super-resolution RESOLFT (reversible saturable optical fluorescence transitions) imaging with apparent 70–90 nm optical resolution.

Stepwise Photochromism of Bis(Imidazole Dimer) Bridged by a Sulfur Atom

We report the development of the stepwise photochromic imidazole dimer bridged by a sulfur atom. The one-photon absorption leads to the generation of the colored biradical species, which rapidly recombines to the initial imidazole dimer following first-order reaction kinetics. The further photochemical reaction of the biradical species produces the long-lived colored species, which shows intermolecular dimerization.

Turn-On Mode Circularly Polarized Luminescence in Self-Organized Cholesteric Superstructure for Active Photonic Applications

Developing circularly polarized luminescence (CPL)-active materials with a large luminescence dissymmetry factor (g_lum) or stimulus responses has evoked a lot of interest in the past few years; however, the light-controllable "on/off" CPL still remains a challenge. Here, a novel diarylethene-based chiral fluorescent photoswitch featuring "turn-on" CPL characteristic is developed, designated as (S,S)-switch 6, which can undergo reversible photocyclization/cycloreversion upon irradiation with UV and visible light. (S,S)-Switch 6 shows completely reversible "off-on-off"-responsive CPL behavior in solution. By doping (S,S)-switch 6 into nematic liquid crystals (LCs), the consequent luminescent cholesteric LCs (CLCs) exhibit a larger g_lum value enhanced 2 orders of magnitude when irradiated with UV light, which can be attributed to the highly ordered helical arrangement of CLCs. The potentials of this turn-on type CPL material for anticounterfeiting and information encryption are illustrated. Furthermore, the visualization of circularly polarized (CP) fluorescent patterns can be successfully achieved by constructing the double-layer CPL system consisting of a CP luminescent layer and a polymer cholesteric reflective layer. The proposed concept establishes a light-controlled off-on-off CPL platform that is of tremendous potential for applications in multi-informational data storage and encryption devices.

Photoinduced cytotoxicity of photochromic symmetric diarylethene derivatives: the relation of structure and cytotoxicity

Photopharmacology has been attracting attention for the development of drugs with fewer side effects and lower toxicity by introducing a photoswitch structure in the drug and controlling its spatiotemporal effects by light irradiation. Ideally, to achieve precise spatiotemporal control, it is desirable to use photoresponsive molecules that act as anticancer agents based on molecular switch mechanisms at the molecular level. However, very few reports on photoinduced cytotoxicity have used photoresponsive molecules with simple structures. Here, we investigate the photoinduced cytotoxicity of twelve diarylethene derivatives having thiazole or pyridine rings in their molecules and evaluate them in terms of molecular structure and size. Our results provide insight into molecular design principles for diarylethene with a simple structure toward achieving precise control based on molecular-level switch mechanisms.

Future-Oriented Advanced Diarylethene Photoswitches: From Molecular Design to Spontaneous Assembly Systems

Diarylethene (DAE) photoswitch is a new and promising family of photochromic molecules and has shown superior performance as a smart trigger in stimulus-responsive materials. During the past few decades, the DAE family has achieved a leap from simple molecules to functional molecules and developed toward validity as a universal switching building block. In recent years, the introduction of DAE into an assembly system has been an attractive strategy that enables the photochromic behavior of the building blocks to be manifested at the level of the entire system, beyond the DAE unit itself. This assembly-based strategy will bring many unexpected results that promote the design and manufacture of a new generation of advanced materials. Here, recent advances in the design and fabrication of diarylethene as a trigger in materials science, chemistry, and biomedicine are reviewed.

A DNA-Based Two-Component Excitonic Switch Utilizing High-Performance Diarylethenes

Nucleosidic diarylethenes (DAEs) are an emerging class of photochromes but have rarely been used in materials science. Here, we have developed doubly methylated DAEs derived from 2'-deoxyuridine with high thermal stability and fatigue resistance. These new photoswitches not only outperform their predecessors but also rival classical non-nucleosidic DAEs. To demonstrate the utility of these new DAEs, we have designed an all-optical excitonic switch consisting of two oligonucleotides: one strand containing a fluorogenic double-methylated 2'-deoxyuridine as a fluorescence donor and the other a tricyclic cytidine (tC) as acceptor, which together form a highly efficient conditional Förster-Resonance-Energy-Transfer (FRET) pair. The system was operated in liquid and solid phases and showed both strong distance- and orientation-dependent photochromic FRET. The superior ON/OFF contrast was maintained over up to 100 switching cycles, with no detectable fatigue.

Reversible Near-Infrared Fluorescence Photoswitching in Aqueous Media by Diarylethene: Toward High-Accuracy Live Optical Imaging

Fluorescence imaging is an indispensable tool in modern biological research, allowing simple and inexpensive color-coded visualizations of real-time events in living cells and animals, as well as of fixed states of ex vivo specimens. The accuracy of fluorescence imaging in living systems is, however, impeded by autofluorescence, light scattering, and limited penetration depth of light. Nevertheless, the clinical use of fluorescence imaging is expected to grow along with advances in imaging equipment, and will increasingly demand high-accuracy probes to avoid false-positive results in disease detection. To this end, a water-soluble and relatively safe diarylethene (DAE)-based reversible near-infrared (NIR) fluorescence photoswitch for living systems is prepared here. Furthermore, to facilitate excellent switching performance, the photoirradiation results obtained is compared using three different visible light sources to turn on NIR fluorescence through cycloreversion of DAE. While photoswitching using 589 nm light leads to slightly higher cell viability, fluorescence quenching efficiency and fatigue resistance are higher when 532 nm light with low photobleaching is used in both aqueous solution and living systems. The authors anticipate that their reversible NIR fluorescence photoswitch mediated by DAE can be beneficial for fluorescence imaging in aqueous media requiring accurate detection, such as in the autofluorescence-rich living environment.

Visualization of the microstructure and the position-dependent diffusion coefficient in a blended polymer solid using photo-activation localization microscopy combined with single-molecule tracking based on one-color fluorescence-switching of diarylethene

Using one-color fluorescence-switching of diarylethene derivatives (DAEs), thousands of single-molecule translational trajectories in a blended polymer solid were measured with nanometric accuracy.

Turn-on mode fluorescent diarylethene having neopentyl substituents that undergoes all-visible-light switching

This paper presents a strategy for improving all-visible-light switching response of turn-on mode fluorescent diarylethene derivatives. Introduction of neopentyl or isobutyl substituents at the reactive carbons (2- and 2’-positions) of...

Recent Progress in the Correlative Structured Illumination Microscopy

The super-resolution imaging technique of structured illumination microscopy (SIM) enables the mixing of high-frequency information into the optical transmission domain via light-source modulation, thus breaking the optical diffraction limit. Correlative SIM, which combines other techniques with SIM, offers more versatility or higher imaging resolution than traditional SIM. In this review, we first briefly introduce the imaging mechanism and development trends of conventional SIM. Then, the principles and recent developments of correlative SIM techniques are reviewed. Finally, the future development directions of SIM and its correlative microscopies are presented.

Development of Red-Shifted and Fluorogenic Nucleoside and Oligonucleotide Diarylethene Photoswitches

The reversible modulation of fluorescence signals by light is of high interest for applications in super‐resolution microscopy, especially on the DNA level. In this article we describe the systematic variation of the core structure in nucleoside‐based diarylethenes (DAEs), in order to generate intrinsically fluorescent photochromes. The introduction of aromatic bridging units resulted in a bathochromic shift of the visible absorption maximum of the closed‐ring form, but caused reduced thermal stability and switching efficiency. The replacement of the thiophene aryl unit by thiazol improved the thermal stability, whereas the introduction of a benzothiophene unit led to inherent and modulatable turn‐off fluorescence. This feature was further optimized by introducing a fluorescent indole nucleobase into the DAE core, resulting in an effective photoswitch with a fluorescence quantum yield of 0.0166 and a fluorescence turn‐off factor of 3.2. The site‐specific incorporation into an oligonucleotide resulted in fluorescence‐switchable DNA with high cyclization quantum yields and switching efficiency, which may facilitate future applications.

Molecular photoswitches in aqueous environments

Molecular photoswitches enable dynamic control of processes with high spatiotemporal precision, using light as external stimulus, and hence are ideal tools for different research areas spanning from chemical biology to smart materials. Photoswitches are typically organic molecules that feature extended aromatic systems to make them responsive to (visible) light. However, this renders them inherently lipophilic, while water-solubility is of crucial importance to apply photoswitchable organic molecules in biological systems, like in the rapidly emerging field of photopharmacology. Several strategies for solubilizing organic molecules in water are known, but there are not yet clear rules for applying them to photoswitchable molecules. Importantly, rendering photoswitches water-soluble has a serious impact on both their photophysical and biological properties, which must be taken into consideration when designing new systems. Altogether, these aspects pose considerable challenges for successfully applying molecular photoswitches in aqueous systems, and in particular in biologically relevant media. In this review, we focus on fully water-soluble photoswitches, such as those used in biological environments, in both in vitro and in vivo studies. We discuss the design principles and prospects for water-soluble photoswitches to inspire and enable their future applications.

Photofluorochromic water-dispersible nanoparticles for single-photon-absorption upconversion cell imaging

Photofluorochromic diarylethene (DAE) molecules have been widely investigated due to their excellent fatigue resistance and thermal stability. However, the poor water solubility of DAEs limits their biological applications to some extent. Herein, we reported two kinds of water-dispersible DAE nanoparticles (DAEI-NPs and DAEB-NPs), in which DAE molecules were stabilized by the amphiphilic polymer DSPE-mPEG2000 using the nanoprecipitation approach. The fabricated nanoparticles retain well-controlled luminescence and fluorescence photoswitching properties in aqueous solution, which could be reversibly switched on and off under the alternating irradiation of ultraviolet (UV) and visible light. In addition, the closed-ring isomers of DAEB-NPs performed hot-band-absorption-based photon upconversion when excited by a 593.5 nm laser. Bearing excellent photophysical properties and low cytotoxicity, DAEB-NPs were applicable for upconversion cell imaging without high-excitation power density and free from oxygen removal. Additionally, the imaging process could be switched on by regulating the photofluorochromic nanoparticles.

A light-activatable photosensitizer for photodynamic therapy based on a diarylethene derivative

Herein, a light-activatable photosensitizer based on a diarylethene derivative, DAE-TPE, was developed for photodynamic therapy. Upon UV exposure, the "opened" form (OF) of DAE-TPE NPs was converted to the "closed" form (CF), and photosensitization was activated. The CF of DAE-TPE NPs exhibited sufficient photodynamic therapy effects upon HeLa cells.

Long-term switching of single photochromic triads based on dithienylcyclopentene and fluorophores at cryogenic temperatures

Photochromic molecules can be reversibly converted between two bistable forms by light. These systems have been intensively studied for applications as molecular memories, sensing devices, or super-resolution optical microscopy. Here, we study the long-term switching behavior of single photochromic triads under oxygen-free conditions at 10 K. The triads consist of a photochromic unit that is covalently linked to two strong fluorophores that were employed for monitoring the light-induced conversions of the switch via changes in the fluorescence intensity from the fluorophores. As dyes we use either perylene bisimide or boron-dipyrromethen, and as photochromic switch we use dithienylcyclopentene (DCP). Both types of triads showed high fatigue resistance allowing for up to 6000 switching cycles of a single triad corresponding to time durations in the order of 80 min without deterioration. Long-term analysis of the switching cycles reveals that the probability that an intensity change in the emission from the dyes can be assigned to an externally stimulated conversion of the DCP (rather than to stochastic blinking of the dye molecules) amounts to 0.7 ± 0.1 for both types of triads. This number is far too low for optical data storage using single triads and implications concerning the miniaturization of optical memories based on such systems will be discussed. Yet, together with the high fatigue resistance, this number is encouraging for applications in super-resolution optical microscopy on frozen biological samples.