Small and Bright Lithium-Based Upconverting Nanoparticles

A hybrid strategy to enhance small-sized upconversion nanocrystals

Upconversion nanoparticles (UCNPs) are characterized by high photostability, narrow spectral bands, excellent tuneability, and low biotoxicity, facilitating a broad range of biomedical applications. However, the small size required in many biological applications implies a lower luminescent brightness, as large surface-to-volume ratio is always accompanied with severe surface quenching. Herein, we introduce a strategy to overcome the surface quenching by incorporating an acceptor dye, sulforhodamine B (SRB) to surpass energy relaxation on long-lived lanthanide excited states. The surface modification of SRB led to up to 98.8% energy transfer efficiency, accompanied with the emergence of an intense SRB emission, with four orders of magnitude of change in the SRB/UCNPs emission ratio. The further structural optimisation led to an 8-fold upconversion emission enhancement. Moreover, the system exhibits excellent photostability, with only a 25% reduction over 2 h under intense irradiation. By incorporating a pH responsive 5-carboxytetramethylrhodamine (5-TAMRA) to the UCNPs, we achieved a self-referencing protochromic sensor that are specific to protons and resistant to interference from various metal ions. This work provides a facile method for enhancing small-sized nanocrystals for potential biomedical sensing and imaging applications.

Autoclave reactor synthesis of upconversion nanoparticles, unreported variables, and safety considerations

Autoclave reactors are widely used across chemical and biological sciences, including for the synthesis of upconversion nanoparticles (UCNPs) and other nanomaterials. Yet, the details of how autoclave reactors are used in such synthesis are rarely reported in the literature, leaving several key synthesis variables widely unreported and thereby hampering experimental reproducibility. In this perspective, we discuss the safety considerations of autoclave reactors and note that autoclaves should only be used if they are (a) purchased from reputable suppliers/manufacturers and (b) have been certified compliant with relevant safety standards. Ultimately, using unsuitable autoclave equipment can pose a severe physical hazard and may breach legal safety requirements. In addition, we highlight several parameters in autoclave synthesis that should be reported as standard to maximise the reproducibility of autoclave synthesis experiments across materials and chemistry research. We encourage users of autoclave synthesis vessels to: (1) adopt high-safety autoclaves and (2) report the many experimental variables involved to enhance experimental reproducibility.

Polymeric nanocarriers for therapeutic gene delivery

The recent commercialization of gene products has sparked significant interest in gene therapy, necessitating efficient and precise gene delivery via various vectors. Currently, viral vectors and lipid-based nanocarriers are the predominant choices and have been extensively investigated and reviewed. Beyond these vectors, polymeric nanocarriers also hold the promise in therapeutic gene delivery owing to their versatile functionalities, such as improving the stability, cellar uptake and endosomal escape of nucleic acid drugs, along with precise delivery to targeted tissues. This review presents a brief overview of the status quo of the emerging polymeric nanocarriers for therapeutic gene delivery, focusing on key cationic polymers, nanocarrier types, and preparation methods. It also highlights targeted diseases, strategies to improve delivery efficiency, and potential future directions in this research area. The review is hoped to inspire the development, optimization, and clinical translation of highly efficient polymeric nanocarriers for therapeutic gene delivery.

Synergistic Enhancement of Photodynamic Cancer Therapy with Mesenchymal Stem Cells and Theranostic Nanoparticles

Nanoparticles engineered to combat cancer and other life-threatening diseases may significantly improve patient outcomes. However, inefficient nanoparticle delivery to tumors limits their use and necessitates the development of complex delivery approaches. Here, we examine this issue by harnessing the tumor-homing abilities of human mesenchymal stem cells (MSCs) to deliver a decoupled theranostic complex of rare earth-doped nanoparticles (dNPs) and photosensitizer chlorin e6 (Ce6) to tumors. We show that both bone-marrow- and skin-derived MSCs can transport the dNP-Ce6 complex inside tumor spheroids, which is challenging to accomplish by passive delivery alone. MSCs deliver the dNP-Ce6 complex across the tumor spheroid, facilitating more effective photodynamic damage and tumor destruction than passively accumulated dNP-Ce6. The dNP-Ce6 complex also provides the built-in ability to monitor the MSC migration without causing undesired phototoxicity, which is essential for maximal and side-effect-free delivery of nanoparticles. Our results demonstrate how MSCs can be used as delivery vehicles for the transportation of the dNP-Ce6 complex, addressing the limitations of passive nanoparticle delivery and providing light-based theranostics.

Strategy to Achieve a Pure Red/Green/Blue-Emitting Upconversion Luminescence for Full-Color Displays

Multicolor tunable upconversion nanoparticles (UCNPs) have garnered attention owing to their diverse applications such as displays, imaging, and security. Typically, achieving multicolor emission from UCNPs requires complicated core/multishell nanostructures comprising a core with at least five shells. Here, we propose a strategy to achieve bright and orthogonal red (R), green (G), and blue (B) upconversion (UC) luminescence without synthesizing complicated core/quintuple-shell or core/sextuple-shell nanostructures. For achieving bright and orthogonal RGB triprimary color UC luminescence, orthogonal bicolor-emitting core/shell-structured UCNPs are synthesized and blended. Orthogonal RB, RG, and GB luminescence are achieved through photon blocking. The combination of two orthogonal bicolor-emitting UCNPs exhibits pure RGB UC luminescence and full-color tunability via manipulation of excitation laser conditions. Furthermore, we present color displays achieved with transparent UCNP-polymer composites utilizing three distinct near-infrared light wavelengths, implying that the proposed strategy for attaining RGB UC luminescence may facilitate advancements in the development of full-color volumetric displays.

Upconverting Nanoparticles Coated with Light-Breakable Mesoporous Silica for NIR-Triggered Release of Hydrophobic Molecules

Upconverting nanoparticles (UCNPs) doped with Yb3+ and Tm3+ are near-infrared (NIR) to ultraviolet (UV) transducers that can be used for NIR-controlled drug delivery. However, due to the low quantum yield of upconversion, high laser powers and long irradiation times are required to trigger this drug release. In this work, we report the one-step synthesis of a nanocomposite consisting of a LiYbF4:Tm3+@LiYF4 UCNP coated with mesoporous UV-breakable organosilica shells of various thicknesses. We demonstrate that a thin shell accelerates the breakage of the shell at 1 W/cm2 NIR light exposure, a laser power up to 9 times lower than that of conventional systems. When the mesopores are loaded with hydrophobic vitamin D3 precursor 7-dehydrocholesterol (7-DH), shell breakage results in subsequent cargo release. Its minimal toxicity in HeLa cells and successful internalization into the cell cytoplasm demonstrate its biocompatibility and potential application in biological systems. The tunability of this system due to its simple, one-step synthesis process and its ability to operate at low laser powers opens up avenues in UCNP-powered NIR-triggered drug delivery toward a more scalable, flexible, and ultimately translational option.

Comparison of the Differences between Two-Photon Excitation, Upconversion, and Conventional Photodynamic Therapy on Cancers in In Vitro and In Vivo Studies

Photodynamic therapy (PDT) is a minimally invasive treatment for several diseases. It combines light energy with a photosensitizer (PS) to destroy the targeted cells or tissues. A PS itself is a non-toxic substance, but it becomes toxic to the target cells through the activation of light at a specific wavelength. There are some limitations of PDT, although it has been used in clinical studies for a long time. Two-photon excitation (TPE) and upconversion (UC) for PDT have been recently developed. A TPE nanoparticle-based PS combines the advantages of TPE and nanotechnology that has emerged as an attractive therapeutic agent for near-infrared red (NIR) light-excited PDT, whilst UC is also used for the NIR light-triggered drug release, activation of 'caged' imaging, or therapeutic molecules during PDT process for the diagnosis, imaging, and treatment of cancers.

METHODS

Nine electronic databases were searched, including WanFang Data, PubMed, Science Direct, Scopus, Web of Science, Springer Link, SciFinder, and China National Knowledge Infrastructure (CNKI), without any language constraints. TPE and UCNP were evaluated to determine if they had different effects from PDT on cancers. All eligible studies were analyzed and summarized in this review.

RESULTS

TPE-PDT and UCNP-PDT have a high cell or tissue penetration ability through the excitation of NIR light to activate PS molecules. This is much better than the conventional PDT induced by visible or ultraviolet (UV) light. These studies showed a greater PDT efficacy, which was determined by enhanced generation of reactive oxygen species (ROS) and reduced cell viability, as well as inhibited abnormal cell growth for the treatment of cancers.

CONCLUSIONS

Conventional PDT involves Type I and Type II reactions for the generation of ROS in the treatment of cancer cells, but there are some limitations. Recently, TPE-PDT and UCNP-PDT have been developed to overcome these problems with the help of nanotechnology in in vitro and in vivo studies.

Brownian Motion Governs the Plasmonic Enhancement of Colloidal Upconverting Nanoparticles

Upconverting nanoparticles are essential in modern photonics due to their ability to convert infrared light to visible light. Despite their significance, they exhibit limited brightness, a key drawback that can be addressed by combining them with plasmonic nanoparticles. Plasmon-enhanced upconversion has been widely demonstrated in dry environments, where upconverting nanoparticles are immobilized, but constitutes a challenge in liquid media where Brownian motion competes against immobilization. This study employs optical tweezers for the three-dimensional manipulation of an individual upconverting nanoparticle, enabling the exploration of plasmon-enhanced upconversion luminescence in water. Contrary to expectation, experiments reveal a long-range (micrometer scale) and moderate (20%) enhancement in upconversion luminescence due to the plasmonic resonances of gold nanostructures. Comparison between experiments and numerical simulations evidences the key role of Brownian motion. It is demonstrated how the three-dimensional Brownian fluctuations of the upconverting nanoparticle lead to an "average effect" that explains the magnitude and spatial extension of luminescence enhancement.

Short-wave Infrared Photoluminescence Lifetime Mapping of Rare-Earth Doped Nanoparticles Using All-Optical Streak Imaging

The short-wave infrared (SWIR) photoluminescence lifetimes of rare-earth doped nanoparticles (RENPs) have found diverse applications in fundamental and applied research. Despite dazzling progress in the novel design and synthesis of RENPs with attractive optical properties, existing optical systems for SWIR photoluminescence lifetime imaging are still considerably restricted by inefficient photon detection, limited imaging speed, and low sensitivity. To overcome these challenges, SWIR photoluminescence lifetime imaging microscopy using an all-optical streak camera (PLIMASC) is developed. Synergizing scanning optics and a high-sensitivity InGaAs CMOS camera, SWIR-PLIMASC has a 1D imaging speed of up to 138.9 kHz in the spectral range of 900-1700 nm, which quantifies the photoluminescence lifetime of RENPs in a single shot. A 2D photoluminescence lifetime map can be acquired by 1D scanning of the sample. To showcase the power of SWIR-PLIMASC, a series of core-shell RENPs with distinct SWIR photoluminescence lifetimes is synthesized. In particular, using Er3+ -doped RENPs, SWIR-PLIMASC enables multiplexed anti-counterfeiting. Leveraging Ho3+ -doped RENPs as temperature indicators, this system is applied to SWIR photoluminescence lifetime-based thermometry. Opening up a new avenue for efficient SWIR photoluminescence lifetime mapping, this work is envisaged to contribute to advanced materials characterization, information science, and biomedicine.

The use of energy looping between Tm3+ and Er3+ ions to obtain an intense upconversion under the 1208 nm radiation and its use in temperature sensing

The upconversion phenomenon allows for the emission of nanoparticles (NPs) under excitation with near-infrared (NIR) light. Such property is demanded in biology and medicine to detect or treat diseases such as tumours. The transparency of biological systems for NIR light is limited to three spectral ranges, called biological windows. However, the most frequently used excitation laser to obtain upconversion is out of these ranges, with a wavelength of around 975 nm. In this article, we show an alternative - Tm3+/Er3+-doped NPs that can convert 1208 nm excitation radiation, which is in the range of the 2nd biological window, to visible light within the 1st biological window. The spectroscopic properties of the core@shell NaYF4:Tm3+@NaYF4 and NaYF4:Er3+,Tm3+@NaYF4 NPs revealed a complex mechanism responsible for the observed upconversion. To explain emission in the studied NPs, we propose an energy looping mechanism: a sequence of ground state absorption, energy transfers and cross-relaxation (CR) processes between Tm3+ ions. Next, the excited Tm3+ ions transfer the absorbed energy to Er3+ ions, which results in green, red and NIR emission at 526, 546, 660, 698, 802 and 982 nm. The ratio between these bands is temperature-dependent and can be used in remote optical thermometers with high relative temperature sensitivity, up to 2.37%/°C at 57 °C. The excitation and emission properties of the studied NPs fall within 1st and 2nd biological windows, making them promising candidates for studies in biological systems.

Accelerating the Design of Multishell Upconverting Nanoparticles through Bayesian Optimization

The photon upconverting properties of lanthanide-doped nanoparticles drive their applications in imaging, optoelectronics, and additive manufacturing. To maximize their brightness, these upconverting nanoparticles (UCNPs) are often synthesized as core/shell heterostructures. However, the large numbers of compositional and structural parameters in multishell heterostructures make optimizing optical properties challenging. Here, we demonstrate the use of Bayesian optimization (BO) to learn the structure and design rules for multishell UCNPs with bright ultraviolet and violet emission. We leverage an automated workflow that iteratively recommends candidate UCNP structures and then simulates their emission spectra using kinetic Monte Carlo. Yb3+/Er3+- and Yb3+/Er3+/Tm3+-codoped UCNP nanostructures optimized with this BO workflow achieve 10- and 110-fold brighter emission within 22 and 40 iterations, respectively. This workflow can be expanded to structures with higher compositional and structural complexity, accelerating the discovery of novel UCNPs while domain-specific knowledge is being developed.

Bright photon upconversion in LiYbF4:Tm3+@LiYF4 nanoparticles and their application for singlet oxygen generation and in immunoassay for SARS-CoV-2 nucleoprotein

Photon upconversion is an intensively investigated phenomenon in the materials sciences due to its unique applications, mainly in biomedicine for disease prevention and treatment. This study reports the synthesis and properties of tetragonal LiYbF4:Tm3+@LiYF4 core@shell nanoparticles (NPs) and their applications. The NPs had sizes ranging from 18.5 to 23.7 nm. As a result of the energy transfer between Yb3+ and Tm3+ ions, the synthesized NPs show intense emission in the ultraviolet (UV) range up to 347 nm under 975 nm excitation. The bright emission in the UV range allows for singlet oxygen generation in the presence of hematoporphyrin on the surface of NPs. Our studies show that irradiation with a 975 nm laser of the functionalized NPs allows for the production of amounts of singlet oxygen easily detectable by Singlet Oxygen Sensor Green. The high emission intensity of NPs at 800 nm allowed the application of the synthesized NPs in an upconversion-linked immunosorbent assay (ULISA) for highly sensitive detection of the nucleoprotein from SARS-CoV-2, the causative agent of Covid-19. This article proves that LiYbF4:Tm3+@LiYF4 core@shell nanoparticles can be perfect alternatives for the most commonly studied upconverting NPs based on the NaYF4 host compound and are good candidates for biomedical applications.

Fabrication of Europium-Doped CaF2 Films via Sol-Gel Synthesis as Down-Shifting Layers for Solar Cell Applications

In the present work, an in-depth study on the sol-gel process for the fabrication of Eu-doped CaF2 materials in the form of thin films has been addressed for the production of down-shifting layers. Fine-tuning of the operative parameters, such as the annealing temperature, substrate nature and doping ion percentage, has been finalized in order to obtain Eu(III)-doped CaF2 thin films via a reproducible and selective solution process for down-shifting applications. An accurate balance of such parameters allows for obtaining films with high uniformity in terms of both their structural and compositional features. The starting point of the synthesis is the use of a mixture of Ca(hfa)2•diglyme•H2O and Eu(hfa)3•diglyme adducts, with a suited ratio to produce 5%, 10% and 15% Eu-doped CaF2 films, in a water/ethanol solution. A full investigation of the structural, morphological and compositional features of the films, inspected using X-ray diffraction analysis (XRD), field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray analysis (EDX), respectively, has stated a correlation between the annealing temperature and the structural characteristics and morphology of the CaF2 thin films. Interestingly, crystalline CaF2 films are obtained at quite low temperatures of 350-400 °C. The down-shifting properties, validated by taking luminescence measurements under UV excitation, have allowed us to correlate the local environment in terms of the degree of symmetry around the europium ions with the relative doping ion percentages.

Lanthanide-Doped KMgF3 Upconversion Nanoparticles for Photon Avalanche Luminescence with Giant Nonlinearities

Lanthanide (Ln3+)-doped photon avalanche (PA) upconversion nanoparticles (UCNPs) have great prospects in many advanced technologies; however, realizing efficient PA luminescence in Ln3+-doped UCNPs remains challenging due to the deleterious surface and lattice quenching effect. Herein, we report a unique strategy based on the pyrolysis of KHF2 for the controlled synthesis of aliovalent Ln3+-doped KMgF3 UCNPs, which can effectively protect Ln3+ from luminescence quenching by surface and internal OH- defects and thereby boost upconversion luminescence. This enables us to realize efficient PA luminescence from Tm3+ at 802 nm in KMgF3: Tm3+ UCNPs upon 1064 nm excitation, with a giant nonlinearity of ∼27, a PA response time of 281 ms, and an excitation threshold of 16.6 kW cm-2. This work may open up a new avenue for exploring highly nonlinear PA luminescence through aliovalent Ln3+ doping and crystal lattice engineering toward diverse emerging applications.

Nucleation and Growth of Bipyramidal Yb:LiYF4 Nanocrystals-Growing Up in a Hot Environment

Lanthanide-doped LiYF₄ (Ln:YLF) is commonly used for a broad variety of optical applications, such as lasing, photon upconversion and optical refrigeration. When synthesized as nanocrystals (NCs), this material is also of interest for biological applications and fundamental physical studies. Until now, it was unclear how Ln:YLF NCs grow from their ionic precursors into tetragonal NCs with a well-defined, bipyramidal shape and uniform dopant distribution. Here, we study the nucleation and growth of ytterbium-doped LiYF₄ (Yb:YLF), as a template for general Ln:YLF NC syntheses. We show that the formation of bipyramidal Yb:YLF NCs is a multistep process starting with the formation of amorphous Yb:YLF spheres. Over time, these spheres grow via Ostwald ripening and crystallize, resulting in bipyramidal Yb:YLF NCs. We further show that prolonged heating of the NCs results in the degradation of the NCs, observed by the presence of large LiF cubes and small, irregular Yb:YLF NCs. Due to the similarity in chemical nature of all lanthanide ions our work sheds light on the formation stages of Ln:YLF NCs in general.

Elemental-Migration-Assisted Full-Color-Tunable Upconversion Nanoparticles for Video-Rate Three-Dimensional Volumetric Displays

Herein, we demonstrate video-rate color three-dimensional (3D) volumetric displays using elemental-migration-assisted full-color-tunable upconversion nanoparticles (UCNPs). In the heavily doped NaErF₄:Tm-based core@multishell UCNPs, erbium migration was observed. By tailoring this migration through adjustment of the intermediate shell thickness between the core and the sensitizer-doped second shell, red-green orthogonal upconversion luminescence (UCL) was achieved. Furthermore, highly efficient red-green-blue orthogonal UCL and full-color tunability were achieved in the UCNPs through a combination of elemental-migration-assisted color tuning and selective photon blocking. Finally, 3D volumetric displays were fabricated using a UCNP-polydimethylsiloxane composite. More specifically, 3D color images were created and motion pictures based on the expansion, rotation, and up/down movement of the displayed images were realized in the display matrix. Overall, our study provides new insights into upconversion color tuning and the achievement of motion pictures in the UCNP-polydimethylsiloxane composite is expected to accelerate the further development of solid-state full-color 3D volumetric displays.

Optical Properties Investigation of Upconverting K2Gd(PO4)(WO4):20%Yb3+,Tm3+ Phosphors

Nowadays, scientists are interested in inorganic luminescence materials that can be excited with UV or NIR radiation and emit in the visible range. Such inorganic materials can be successfully used as luminescent or anti-counterfeiting pigments. In this work, we report the synthesis and optical properties investigation of solely Tm³⁺ doped and Yb³⁺/Tm³⁺ co-doped K₂Gd(PO₄)(WO₄) phosphors. The single-phase samples were prepared using a solid-state reaction method. The Tm³⁺ concentration was changed from 0.5% to 5%. Downshifting and upconversion emission studies were performed under 360 nm and 980 nm excitation, respectively. Yb³⁺ ions were used as sensitizers in the K₂Gd(PO₄)(WO₄) phosphors to transfer the captured energy to Tm³⁺ ions. It turned out that under UV excitation, phosphors emitted in the blue spectral area regardless of the presence or absence of Yb³⁺. However, a very strong deep-red (~800 nm) emission was observed when Yb³⁺ and Tm³⁺-containing samples were excited with a 980 nm wavelength laser. It is interesting that the highest upconversion emission in the UV/Visible range was achieved for 20% Yb³⁺, 0.5% Tm³⁺ doped sample, whereas the sample co-doped with 20% Yb³⁺, 2% Tm³⁺ showed the most intensive UC emission band in the NIR range. The materials were characterized using powder X-ray diffraction and scanning electron microscopy. Optical properties were studied using steady-state and kinetic downshifting and upconversion photoluminescence spectroscopy.

The Coming of Age of Neodymium: Redefining Its Role in Rare Earth Doped Nanoparticles

Among luminescent nanostructures actively investigated in the last couple of decades, rare earth (RE³⁺) doped nanoparticles (RENPs) are some of the most reported family of materials. The development of RENPs in the biomedical framework is quickly making its transition to the ∼800 nm excitation pathway, beneficial for both in vitro and in vivo applications to eliminate heating and facilitate higher penetration in tissues. Therefore, reports and investigations on RENPs containing the neodymium ion (Nd³⁺) greatly increased in number as the focus on ∼800 nm radiation absorbing Nd³⁺ ion gained traction. In this review, we cover the basics behind the RE³⁺ luminescence, the most successful Nd³⁺-RENP architectures, and highlight application areas. Nd³⁺-RENPs, particularly Nd³⁺-sensitized RENPs, have been scrutinized by considering the division between their upconversion and downshifting emissions. Aside from their distinctive optical properties, significant attention is paid to the diverse applications of Nd³⁺-RENPs, notwithstanding the pitfalls that are still to be addressed. Overall, we aim to provide a comprehensive overview on Nd³⁺-RENPs, discussing their developmental and applicative successes as well as challenges. We also assess future research pathways and foreseeable obstacles ahead, in a field, which we believe will continue witnessing an effervescent progress in the years to come.

Recent Development in Sensitizers for Lanthanide-Doped Upconversion Luminescence

The attractive features of lanthanide-doped upconversion luminescence (UCL), such as high photostability, nonphotobleaching or photoblinking, and large anti-Stokes shift, have shown great potentials in life science, information technology, and energy materials. Therefore, UCL modulation is highly demanded toward expected emission wavelength, lifetime, and relative intensity in order to satisfy stringent requirements raised from a wide variety of areas. Unfortunately, the majority of efforts have been devoted to either simple codoping of multiple activators or variation of hosts, while very little attention has been paid to the critical role that sensitizers have been playing. In fact, different sensitizers possess different excitation wavelengths and different energy transfer pathways (to different activators), which will lead to different UCL features. Thus, rational design of sensitizers shall provide extra opportunities for UCL tuning, particularly from the excitation side. In this review, we specifically focus on advances in sensitizers, including the current status, working mechanisms, design principles, as well as future challenges and endeavor directions.

Oleic acid/oleylamine ligand pair: a versatile combination in the synthesis of colloidal nanoparticles

A variety of colloidal chemical approaches has been developed in the last few decades for the controlled synthesis of nanostructured materials in either water or organic solvents. Besides the precursors, the solvents, reducing agents, and the choice of surfactants are crucial for tuning the composition, morphology and other properties of the resulting nanoparticles. The ligands employed include thiols, amines, carboxylic acids, phosphines and phosphine oxides. Generally, adding a single ligand to the reaction mixture is not always adequate to yield the desired features. In this review, we discuss in detail the role of the oleic acid/oleylamine ligand pair in the chemical synthesis of nanoparticles. The combined use of these ligands belonging to two different categories of molecules aims to control the size and shape of nanoparticles and prevent their aggregation, not only during their synthesis but also after their dispersion in a carrier solvent. We show how the different binding strengths of these two molecules and their distinct binding modes on specific facets affect the reaction kinetics toward the production of nanostructures with tailored characteristics. Additional functions, such as the reducing function, are also noted, especially for oleylamine. Sometimes, the carboxylic acid will react with the alkylamine to form an acid-base complex, which may serve as a binary capping agent and reductant; however, its reducing capacity may range from lower to much lower than that of oleylamine. The types of nanoparticles synthesized in the simultaneous presence of oleic acid and oleylamine and discussed herein include metal oxides, metal chalcogenides, metals, bimetallic structures, perovskites, upconversion particles and rare earth-based materials. Diverse morphologies, ranging from spherical nanoparticles to anisotropic, core-shell and hetero-structured configurations are presented. Finally, the relation between tuning the resulting surface and volume nanoparticle properties and the relevant applications is highlighted.

Less is more: dimensionality reduction as a general strategy for more precise luminescence thermometry

Thermal resolution (also referred to as temperature uncertainty) establishes the minimum discernible temperature change sensed by luminescent thermometers and is a key figure of merit to rank them. Much has been done to minimize its value via probe optimization and correction of readout artifacts, but little effort was put into a better exploitation of calibration datasets. In this context, this work aims at providing a new perspective on the definition of luminescence-based thermometric parameters using dimensionality reduction techniques that emerged in the last years. The application of linear (Principal Component Analysis) and non-linear (t-distributed Stochastic Neighbor Embedding) transformations to the calibration datasets obtained from rare-earth nanoparticles and semiconductor nanocrystals resulted in an improvement in thermal resolution compared to the more classical intensity-based and ratiometric approaches. This, in turn, enabled precise monitoring of temperature changes smaller than 0.1 °C. The methods here presented allow choosing superior thermometric parameters compared to the more classical ones, pushing the performance of luminescent thermometers close to the experimentally achievable limits.

Bulk-like emission in the visible spectrum of colloidal LiYF4:Pr nanocrystals downsized to 10 nm

Though Pr3+ doped LiYF4 (LiYF4:Pr3+) bulk crystals are a well-known laser gain material with several radiative transitions, their nanocrystal counterparts have not been investigated with regards to these. Through downsizing to the nanoscale, novel applications are expected, especially in composite photonic devices. For example, nanocrystals in stable colloidal form with narrow size distribution are highly desirable to reduce scattering in such composites. Herein, we synthesized monodispersed LiYF4:Pr3+ nanocrystals having a size of 10 nm resulting in colorless clear stable colloidal dispersions and conducted an extensive optical characterization for the first time. We observed unexpected yet intense emission with excited state lifetimes comparable to bulk crystals in the visible spectrum through excitation at 444 nm and 479 nm. In macroscopic bulk crystals, this emission is only exploitable through excitation of a different, subjacent energy level. A comprehensive comparison to the bulk crystals provides deeper insight into the excitation mechanism and performance of these nanocrystals. The presented results pave the way for developing application-oriented LiYF4:Pr3+ nanocrystals as emitters with tailored properties for quantum optics or biomedical applications.

Designing stimuli-responsive upconversion nanoparticles based on an inner filter effect mimetic immunoassay for phenylketonuria accuracy diagnosis

Phenylketonuria (PKU) is the most common inborn error of amino acid metabolism caused by an inherited deficiency in L-phenylalanine-4-hydroxylase (PAH) activity. It is usually controlled by diet and monitored regularly with markers, as PKU is not curable. However, conventional methods for target biomarker analysis are invasive and labor intensive. Here, we report a rapid and sensitive, mimetic immunoassay for detecting phenylpyruvate (PhPY) based on stimuli-responsive upconversion nanoparticles with an inner filter effect (IFE). The strong and specific binding of PhPY and Fe³⁺ forms a complex with maximum absorption at approximately 640 nm. Upon the addition of LiYF₄:Er,Ho@LiYF₄ UCNPs (maximum emission at 699 nm), the inner filter effect is triggered along with a concurrent decrease in fluorescence. The proposed method demonstrates ultra sensitivity with a detection limit of 79.63 μg L^-1, which is superior to most reported methods, thereby enabling phenylpyruvate assays on human urine.

The High-Energy Milling Preparation and Spectroscopic Characterization of Rare-Earth Ions Doped BaY2F8 Nanoparticles

BaY2F8 nanoparticles (NPs), doped with Yb3+ and Er3+ ions, were successfully produced by high-energy ball-milling. High-quality monoclinic single crystals (sp. gr. C2/m, a = 0.6969(3), b = 1.0502(1), c = 0.4254(1) nm, β = 99.676°) grown from the melt by the Bridgman technique were used as raw materials. The prepared nanocrystals were comprehensively studied by X-ray diffraction analysis, transmission electron microscopy, and optical spectroscopy. The fabrication possibility of single-phase irregular shaped Ba(Y0.964Yb0.030Er0.006)2F8 NPs in the size range of 20–100 nm with a milling duration of 10 h at 600 rpm is demonstrated. Ba(Y0.964Yb0.030Er0.006)2F8 NPs show intense luminescence by both up- (λ = 540 and 650 nm) and down-conversion (λ = 1540 nm) mechanisms upon IR excitation (λ = 980 nm). A qualitative comparison of the spectroscopic characteristics of the produced Ba(Y0.964Yb0.030Er0.006)2F8 NPs with the initial bulk crystal and the widely used up-conversion β-Na1.5(Y1.17Yb0.3Er0.03)F6 NPs is presented. Experimental data offer great opportunities of the Ba(Y0.964Yb0.030Er0.006)2F8 NPs applications in nanophotonics and biotechnology. High-energy ball-milling has potential as a versatile method for the scalable production of fluoride nanoparticles.

Advances in fluorescence sensing enabled by lanthanide-doped upconversion nanophosphors

Lanthanide-doped upconversion nanoparticles (UCNPs), characterized by converting low-energy excitation to high-energy emission, have attracted considerable interest due to their inherent advantages of large anti-Stokes shifts, sharp and narrow multicolor emissions, negligible autofluorescence background interference, and excellent chemical- and photo-stability. These features make them promising luminophores for sensing applications. In this review, we give a comprehensive overview of lanthanide-doped upconversion nanophosphors including the fundamental principle for the construction of UCNPs with efficient upconversion luminescence (UCL), followed by state-of-the-art strategies for the synthesis and surface modification of UCNPs, and finally describing current advances in the sensing application of upconversion-based probes for the quantitative analysis of various analytes including pH, ions, molecules, bacteria, reactive species, temperature, and pressure. In addition, emerging sensing applications like photodetection, velocimetry, electromagnetic field, and voltage sensing are highlighted.

Safe and Scalable Polyethylene Glycol-Assisted Hydrothermal Synthesis and Laser Cooling of 10%Yb3+:LiLuF4 Crystals

Rare earth doped lithium fluorides are a class of materials with a wide variety of optical applications, but the hazardous reagents used in their synthesis often restrict the amount of product that can be created at one time. In this work, 10%Yb3+:LiLuF4 (Yb:LLF) crystals have been synthesized through a safe and scalable polyethylene glycol (PEG)-assisted hydrothermal method. A combination of X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), and photoluminescence (PL) measurements were used to characterize the obtained materials. The influence of reaction temperature, time, fluoride source, and precursor amount on the shape and size of the Yb:LLF crystals are also discussed. Calibrated PL spectra of Yb3+ ions show laser cooling to more than 15 K below room temperature in air and 5 K in deionized water under 1020 nm diode laser excitation measured at a laser power of 50 mW.

Polymer brush coated upconverting nanoparticles with improved colloidal stability and cellular labeling

Upconverting nanoparticles (UCNPs) possess great potential for biomedical application. UCNPs absorb and convert near-infrared (NIR) radiation in the biological imaging window to visible (Vis) and even ultraviolet (UV) radiation. NIR excitation offers reduced scattering and diminished autofluorescence in biological samples, whereas the emitted UV-Vis and NIR photons can be used for cancer treatment and imaging, respectively. However, UCNPs are usually synthesized in organic solvents and are not readily suitable for biomedical application due to the hydrophobic nature of their surface. Herein, we have removed the hydrophobic ligands from the synthesized UCNPs and coated the bare UCNPs with two custom-made hydrophilic polyelectrolytes (synthesized via the reversible addition-fragmentation chain transfer (RAFT) polymerization method). Polymers containing different amounts of PEGylated and carboxylic groups were studied. Coating with both polymers increased the upconversion (UC) emission intensity and photoluminescence lifetime values of the UCNPs, which directly translates to more efficient cancer cell labeling nanoprobes. The polymer composition plays a crucial role in the modification of UCNPs, not only with respect to their colloidal stability, but also with respect to the cellular uptake. Colloidally unstable bare UCNPs aggregate in cell culture media and precipitate, rendering themselves unsuitable for any biomedical use. However, stabilization with polymers prevents UCNPs from aggregation, increases their uptake in cells, and improves the quality of cellular labeling. This investigation sheds light on the appropriate coating for UCNPs and provides relevant insights for the rational development of imaging and therapeutic tools.

Upconversion lanthanide nanomaterials: basics introduction, synthesis approaches, mechanism and application in photodetector and photovoltaic devices

Upconversion (UC) of lanthanide-doped nanostructure has the unique ability to convert low energy infrared (IR) light to high energy photons, which has significant potential for energy conversion applications. This review concisely discusses the basic concepts and fundamental theories of lanthanide nanostructures, synthesis techniques, and enhancement methods of upconversion for photovoltaic and for near-infrared (NIR) photodetector (PD) application. In addition, a few examples of lanthanide-doped nanostructures with improved performance were discussed, with particular emphasis on upconversion emission enhancement using coupling plasmon. The use of UC materials has been shown to significantly improve the NIR light-harvesting properties of photovoltaic devices and photocatalytic materials. However, the inefficiency of UC emission also prompted the need for additional modification of the optical properties of UC material. This improvement entailed the proper selection of the host matrix and optimization of the sensitizer and activator concentrations, followed by subjecting the UC material to surface-passivation, plasmonic enhancement, or doping. As expected, improving the optical properties of UC materials can lead to enhanced efficiency of PDs and photovoltaic devices.

Uptake of Upconverting Nanoparticles by Breast Cancer Cells: Surface Coating versus the Protein Corona

Fluorophores with multifunctional properties known as rare-earth-doped nanoparticles (RENPs) are promising candidates for bioimaging, therapy, and drug delivery. When applied in vivo, these nanoparticles (NPs) have to retain long blood-circulation time, bypass elimination by phagocytic cells, and successfully arrive at the target area. Usually, NPs in a biological medium are exposed to proteins, which form the so-called "protein corona" (PC) around the NPs and influence their targeted delivery and accumulation in cells and tissues. Different surface coatings change the PC size and composition, subsequently deciding the fate of the NPs. Thus, detailed studies on the PC are of utmost importance to determine the most suitable NP surface modification for biomedical use. When it comes to RENPs, these studies are particularly scarce. Here, we investigate the PC composition and its impact on the cellular uptake of citrate-, SiO₂-, and phospholipid micelle-coated RENPs (LiYF₄:Yb³⁺,Tm³⁺). We observed that the PC of citrate- and phospholipid-coated RENPs is relatively stable and similar in the adsorbed protein composition, while the PC of SiO₂-coated RENPs is larger and highly dynamic. Moreover, biocompatibility, accumulation, and cytotoxicity of various RENPs in cancer cells have been evaluated. On the basis of the cellular imaging, supported by the inhibition studies, it was revealed that RENPs are internalized by endocytosis and that specific endocytic routes are PC composition dependent. Overall, these results are essential to fill the gaps in the fundamental understanding of the nano-biointeractions of RENPs, pertinent for their envisioned application in biomedicine.

Recent Advances in Stimulus-Responsive Nanocarriers for Gene Therapy

Gene therapy provides a promising strategy for curing monogenetic disorders and complex diseases. However, there are challenges associated with the use of viral delivery vectors. The advent of nanomedicine represents a quantum leap in the application of gene therapy. Recent advances in stimulus-responsive nonviral nanocarriers indicate that they are efficient delivery systems for loading and unloading of therapeutic nucleic acids. Some nanocarriers are responsive to cues derived from the internal environment, such as changes in pH, redox potential, enzyme activity, reactive oxygen species, adenosine triphosphate, and hypoxia. Others are responsive to external stimulations, including temperature gradients, light irradiation, ultrasonic energy, and magnetic field. Multiple stimuli-responsive strategies have also been investigated recently for experimental gene therapy.

Orthogonal R/G/B Upconversion Luminescence-based Full-Color Tunable Upconversion Nanophosphors for Transparent Displays

Here, excitation orthogonalized red/green/blue upconversion luminescence (UCL)-based full-color tunable rare-earth (RE) ion-doped upconversion nanophosphors (UCNPs) are reported. The LiREF₄-based core/sextuple-shell (C/6S) UCNPs are synthesized, and they consist of a blue-emitting core, green-emitting inner shell, and red-emitting outer shell, with inert intermediate and outermost shells. The synthesized C/6S UCNPs emit blue, green, and red light under 980, 800, and 1532 nm, respectively. Importantly, by combining incident near-infrared (NIR) light with various wavelengths (800, 980, and 1532 nm), full-color UCL including blue, cyan, green, yellow, orange, red, purple, and white UCL is achieved from the single C/6S UCNP composition. The color gamut obtained from the C/6S UCNPs shows 101.6% of the sRGB standard color gamut. Furthermore, transparent C/6S UCNP-polydimethylsiloxane (PDMS) composite is prepared. Full-color display realized in the transparent C/6S UCNP-PDMS composite indicates the feasibility of constructing the C/6S UCNP-based three-dimensional volumetric displays with wide color gamut.

Lanthanide ion (Ln3+ )-based upconversion sensor for quantification of food contaminants: A review

The food safety issue has gradually become the focus of attention in modern society. The presence of food contaminants poses a threat to human health and there are a number of interesting researches on the detection of food contaminants. Upconversion nanoparticles (UCNPs) are superior to other fluorescence materials, considering the benefits of large anti-Stokes shifts, high chemical stability, non-autofluorescence, good light penetration ability, and low toxicity. These properties render UCNPs promising candidates as luminescent labels in biodetection, which provides opportunities as a sensitive, accurate, and rapid detection method. This paper intended to review the research progress of food contaminants detection by UCNPs-based sensors. We have proposed the key criteria for UCNPs in the detection of food contaminants. Additionally, it highlighted the construction process of the UCNPs-based sensors, which includes the synthesis and modification of UCNPs, selection of the recognition elements, and consideration of the detection principle. Moreover, six kinds of food contaminants detected by UCNPs technology in the past 5 years have been summarized and discussed fairly. Last but not least, it is outlined that UCNPs have great potential to be applied in food safety detection and threw new insight into the challenges ahead.

Upconversion Luminescent Nanostructure with Ultrasmall Ceramic Nanoparticles Coupled with Rose Bengal for NIR-Induced Photodynamic Therapy

We designed a biodegradable hybrid nanostructure for near-infrared (NIR)-induced photodynamic therapy (PDT) using an ultrasmall upconversion (UC) phosphor (β-NaYF₄:Yb³⁺, Er³⁺ nanoparticle: NPs) and a hydrocarbonized rose bengal (C₁₈RB) dye, a hydrophobized rose bengal (RB) derivative. The UC-NPs were encapsulated along with C₁₈RB in the hydrophobic core of the micelle composed of poly(ethylene glycol) (PEG)-block-poly(ε-caprolactone) (PCL). The UC-NPs were well shielded from the aqueous environment, owing to the encapsulation in the hydrophobic PCL core, to efficiently emit green UC luminescence by avoiding the quenching by the hydroxyl groups. The hydrophobic part of C₁₈ of C₁₈RB worked well to be involved in the PCL core and located RB on the surface of the PCL core, making the efficient absorption of green light and the emission of singlet oxygen to surrounding water possible. Moreover, as the location is covered by PEG, the direct contact of RB to cells is prohibited to avoid their irradiation-free toxic effect on the cells. The hybrid nanostructure proved to be degradable by the hydrolysis of PEG-b-PCL. This degradation potentially results in renal excretion by the decomposition of the nanostructure into sub-10 nm size particles and makes them viable for clinical uses. These nanostructures can potentially be used for PDT of cancer in deep tissues.

Dye-sensitized core-shell NaGdF4:Yb,Er@NaGdF4:Yb,Nd upconversion nanoprobe for determination of H2S

The core-shell NaGdF₄:Yb,Er@NaGdF₄:Yb,Nd upconversion nanoparticles (UCNPs) were successfully obtained with the method of co-precipitation, and the water-solubility of UCNPs was improved by the ligand exchange reaction between nitrosyl tetrafluoroborate (NOBF₄) and nanoparticles. The IR-783 dye with negative charge and NOBF₄-UCNPs with positive charge can bind together by electrostatic action to sensitize UCNPs through the energy transfer from IR-783 to UCNPs. However, with the presence of Na₂S (a commonly used H₂S donor), a highly selective reaction between H₂S and IR-783, which destoried the structure of IR-783 and blocked the energy transfer, thus led to the quenching of luminescent intensity. Based on this, a sensing system for determination of H₂S has been constructed successfully. The linear range of H₂S detection by this system is 0.5-15 μM, and the detection limit is 34.17 nM. Furthermore, the dye-sensitized core-shell NaGdF₄:Yb,Er@NaGdF₄:Yb,Nd upconversion nanoprobe was applied to real sample analysis with satisfactory results.

Switching to the brighter lane: pathways to boost the absorption of lanthanide-doped nanoparticles

Lanthanide-doped nanoparticles (LNPs) are speedily colonizing several research fields, such as biological (multimodal) imaging, photodynamic therapy, volumetric encoding displays, and photovoltaics. Yet, the electronic transitions of lanthanide ions obey the Laporte rule, which dramatically hampers their light absorption capabilities. As a result, the brightness of these species is severely restricted. This intrinsic poor absorption capability is the fundamental obstacle for untapping the full potential of LNPs in several of the aforementioned fields. Among others, three of the most promising physicochemical approaches that have arisen during last two decades to face the challenges of increasing LNP absorption are plasmonic enhancement, organic-dye sensitization, and coupling with semiconductors. The fundamental basis, remarkable highlights, and comparative achievements of each of these pathways for absorption enhancement are critically discussed in this minireview, which also includes a detailed discussion of the exciting perspectives ahead.

Quo Vadis, Nanoparticle-Enabled In Vivo Fluorescence Imaging?

The exciting advancements that we are currently witnessing in terms of novel materials and synthesis approaches are leading to the development of colloidal nanoparticles (NPs) with increasingly greater tunable properties. We have now reached a point where it is possible to synthesize colloidal NPs with functionalities tailored to specific societal demands. The impact of this new wave of colloidal NPs has been especially important in the field of biomedicine. In that vein, luminescent NPs with improved brightness and near-infrared working capabilities have turned out to be optimal optical probes that are capable of fast and high-resolution in vivo imaging. However, luminescent NPs have thus far only reached a limited portion of their potential. Although we believe that the best is yet to come, the future might not be as bright as some of us think (and have hoped!). In particular, translation of NP-based fluorescence imaging from preclinical studies to clinics is not straightforward. In this Perspective, we provide a critical assessment and highlight promising research avenues based on the latest advances in the fields of luminescent NPs and imaging technologies. The disillusioned outlook we proffer herein might sound pessimistic at first, but we consider it necessary to avoid pursuing "pipe dreams" and redirect the efforts toward achievable-yet ambitious-goals.

Hydrothermal syntheses, luminescent properties, and temperature sensing of monodisperse Tb-doped NaCeF4 nanocrystals

Monodisperse Tb-doped NaCeF₄ nanocrystals were synthesized via a hydrothermal method. The morphology, and room temperature and temperature dependent luminescent properties were investigated. Excited at 254 nm, the emissions of Ce³⁺ at 270-370 nm and those of Tb³⁺ at 475-700 nm can be observed. The strongest visible emission was observed in NaCeF₄:20 at% Tb with a quantum yield of 49%. The efficiency of energy transfer from Ce³⁺ to Tb³⁺ increases with the Tb³⁺ doping concentration and reaches 95% for NaCeF₄:30 at% Tb. The ratio of Tb³⁺ emission to Ce³⁺ emission is sensitive to temperature, and the relative sensitivity was calculated to be 1.0% °C^-1 at 60 °C. The mechanisms for this thermal dependence were analyzed in terms of non-radiative relaxation and energy migration.

Bright Infrared-to-Ultraviolet/Visible Upconversion in Small Alkaline Earth-Based Nanoparticles with Biocompatible CaF2 Shells

Upconverting nanoparticles (UCNPs) are promising candidates for photon-driven reactions, including light-triggered drug delivery, photodynamic therapy, and photocatalysis. Herein, we investigate the NIR-to-UV/visible emission of sub-15 nm alkaline-earth rare-earth fluoride UCNPs (M1-x Lnx F2+x, MLnF) with a CaF2 shell. We synthesize 8 alkaline-earth host materials doped with Yb3+ and Tm3+ , with alkaline-earth (M) spanning Ca, Sr, and Ba, MgSr, CaSr, CaBa, SrBa, and CaSrBa. We explore UCNP composition, size, and lanthanide doping-dependent emission, focusing on upconversion quantum yield (UCQY) and UV emission. UCQY values of 2.46 % at 250 W cm-2 are achieved with 14.5 nm SrLuF@CaF2 particles, with 7.3 % of total emission in the UV. In 10.9 nm SrYbF:1 %Tm3+ @CaF2 particles, UV emission increased to 9.9 % with UCQY at 1.14 %. We demonstrate dye degradation under NIR illumination using SrYbF:1 %Tm3+ @CaF2 , highlighting the efficiency of these UCNPs and their ability to trigger photoprocesses.

Enhancing FRET biosensing beyond 10 nm with photon avalanche nanoparticles

Förster Resonance Energy Transfer (FRET) between donor (D) and acceptor (A) molecules is a phenomenon commonly exploited to study or visualize biological interactions at the molecular level. However, commonly used organic D and A molecules often suffer from photobleaching and spectral bleed-through, and their spectral properties hinder quantitative analysis. Lanthanide-doped upconverting nanoparticles (UCNPs) as alternative D species offer significant improvements in terms of photostability, spectral purity and background-free luminescence detection, but they bring new challenges related to multiple donor ions existing in a single large size UCNP and the need for nanoparticle biofunctionalization. Considering the relatively short Förster distance (typically below 5-7 nm), it becomes a non-trivial task to assure sufficiently strong D-A interaction, which translates directly to the sensitivity of such bio-sensors. In this work we propose a solution to these issues, which employs the photon avalanche (PA) phenomenon in lanthanide-doped materials. Using theoretical modelling, we predict that these PA systems would be highly susceptible to the presence of A and that the estimated sensitivity range extends to distances 2 to 4 times longer (i.e. 10-25 nm) than those typically found in conventional FRET systems. This promises high sensitivity, low background and spectral or temporal biosensing, and provides the basis for a radically novel approach to combine luminescence imaging and self-normalized bio-molecular interaction sensing.

Spectral characterization of LiYbF4 upconverting nanoparticles

In light of the recent developments on Yb³⁺-based upconverting rare-earth nanoparticles (RENPs), we have systematically explored the spectral features of LiYbF₄:RE³⁺/LiYF₄ core/shell RENPs doped with various amounts of Tm³⁺, Er³⁺, or Ho³⁺. Tm³⁺-RENPs displayed photoluminescence from the UV to near-infrared (NIR), and the dominant high-photon-order upconversion emission of these RENPs was tunable by Tm³⁺ doping. Similarly, Er³⁺- and Ho³⁺-RENPs with green and red upconversion showed wide color tuning, depending on the doping amount and excitation power density. From steady-state power plot and photoluminescence decay studies we have observed respective changes in upconversion photon order and average lifetime that attest to a number of cross-relaxation processes occurring at higher RE³⁺ doping concentration. Particularly in the case of Tm³⁺-RENPs, cross-relaxation promotes four- and five-photon order upconversion emission in the UV and blue spectral regions. The quantum yield of high-order upconversion emission was on par with classic Yb³⁺/Tm³⁺-doped systems, yet due to the high number of sensitizer ions in the LiYbF₄ host these RENPs are expected to be brighter and thus better suited for applications such as controlled drug delivery or optogenetics. Overall, LiYbF₄:RE³⁺/LiYF₄ RENPs are promising systems to effectively generate high-order upconversion emissions, owing to excitation energy confinement within the Yb³⁺ network and its efficient funneling to the activator dopants.

Tuning epitaxial growth on NaYbF4 upconversion nanoparticles by strain management

Core-shell structural engineering is a common strategy for tuning upconversion luminescence in lanthanide-doped nanoparticles. However, epitaxial growth on hexagonal phase NaYbF₄ nanoparticles typically suffers from incomplete shell coverage due to the large and anisotropic interfacial strain. Herein, we explore the effects of core particle size and morphology as well as reaction temperature on controlling the epitaxial growth of NaGdF₄ shells on NaYbF₄ nanoparticles with misfit parameters of f_a = 1.58% and f_l = 2.24% for axial and lateral growth, respectively. Rod-like core particles with a long length and a large diameter are found to promote shell growth with high surface coverage by facilitating the relaxation of lattice strains. Furthermore, the primary NaGdF₄ shell can serve as a transition layer to mediate the growth of additional NaNdF₄ coating layers that display an even larger lattice misfit with the core (f_a = 2.98%; f_l = 4.32%). The resultant NaYbF₄@Na(Gd/Nd)F₄ core-shell nanostructures simultaneously show strong multiphoton upconversion luminescence and superior magnetic resonance T₁ ionic relaxivity. Our findings are important for the rational design of core-shell upconversion nanoparticles with optimized properties and functionality for technological applications.

Combating Concentration Quenching in Upconversion Nanoparticles

Lanthanide-doped upconversion nanoparticles (UCNPs) are a special class of luminescent nanomaterials that convert multiwavelength near-infrared (NIR) excitation into tunable emissions spanning the deep ultraviolet (UV) to NIR regions. In addition to large anti-Stokes shift, UCNPs also feature a sharp emission bandwidth, long excited-state lifetime, as well as high resistance to optical blinking and photobleaching. Therefore, UCNPs have been identified as promising candidates to solve many challenging problems in fields ranging from biological imaging and therapeutics to photovoltaics and photonics. Nevertheless, the progress of utilizing an upconversion process is being hindered by the limited emission intensity, principally due to low oscillator strength in these nanoparticles. UCNPs essentially resemble the optical characteristics of their bulk counterparts, which take advantage of electronic transition within the 4f configuration of the lanthanide dopants to realize photon energy conversions. In general, a high dopant concentration promotes upconversion luminescence by providing a high density of optical centers to collect and to sustain the energy of the excitation light. However, an increase in dopant concentration induces self-quenching processes that offset the emission gain and may eventually result in attenuation of the overall emission intensity. This phenomenon known as concentration quenching represents a major obstacle to constructing bright UCNPs. In recent years, advances in nanoparticle research have led to the emergence of several strategies for mitigating energy loss at elevated dopant concentrations. In consequence, doping high levels of lanthanide ions in UCNPs has become a viable solution to boosting the emission intensity of photon upconversion. On account of extensive energy exchange interaction in heavily doped UCNPs, the spectrum tunability of photon upconversion is also greatly enhanced. These advances have largely expanded the scope of upconversion research. To provide guidelines for enhancing upconversion through heavy doping, we attempt to review recent advances in the understanding and control of concentration quenching in UCNPs. With significant advancements made in the chemical synthesis, we are now able to exquisitely control the doping of lanthanide ions in various nanoparticles of well-defined size, morphology, and core-shell structure. We show that, by confining energy transfer in nanostructured host materials in conjunction with innovative excitation schemes, concentration quenching of upconversion luminescence is largely alleviated. As a result, unusually high dopant concentrations can be used to construct UCNPs displaying high brightness and large anti-Stokes shift. We demonstrate that the development of heavily doped UCNPs enables advanced bioimaging and photonic applications that can hardly be fulfilled by conventional UCNPs comprising low concentrations of lanthanide dopants.

In vivo deep-tissue microscopy with UCNP/Janus-dendrimers as imaging probes: resolution at depth and feasibility of ratiometric sensing

Lanthanide-based upconverting nanoparticles (UCNPs) are known for their remarkable ability to convert near-infrared energy into higher energy light, offering an attractive platform for construction of biological imaging probes. Here we focus on in vivo high-resolution microscopy - an application for which the opportunity to carry out excitation at low photon fluxes in non-linear regime makes UCNPs stand out among all multiphoton probes. To create biocompatible nanoparticles we employed Janus-type dendrimers as surface ligands, featuring multiple carboxylates on one 'face' of the molecule, polyethylene glycol (PEG) residues on another and Eriochrome Cyanine R dye as the core. The UCNP/Janus-dendrimers showed outstanding performance as vascular markers, allowing for depth-resolved mapping of individual capillaries in the mouse brain down to a remarkable depth of ∼1000 μm under continuous wave (CW) excitation with powers not exceeding 20 mW. Using a posteriori deconvolution, high-resolution images could be obtained even at high scanning speeds in spite of the blurring caused by the long luminescence lifetimes of the lanthanide ions. Secondly, the new UCNP/dendrimers allowed us to evaluate the feasibility of quantitative analyte imaging in vivo using a popular ratiometric UCNP-to-ligand excitation energy transfer (EET) scheme. Our results show that the ratio of UCNP emission bands, which for quantitative sensing should respond selectively to the analyte of interest, is also strongly affected by optical heterogeneities of the medium. On the other hand, the luminescence decay times of UCNPs, which are independent of the medium properties, are modulated via EET only insignificantly. As such, quantitative analyte sensing in biological tissues with UCNP-based probes still remains a challenge.

Recent advances in the synthesis and application of Yb-based fluoride upconversion nanoparticles

This review focuses on recent progress in the development of Yb-based upconversion nanoparticles and their emerging technological applications.