NASICON-type air-stable and all-climate cathode for sodium-ion batteries with low cost and high-power density

Exceeding Three-Electron Reactions in Polyanionic Cathode To Achieve High-Energy Density for Sodium-Ion Batteries

Activating multielectron reactions of sodium superionic conductor (NASICON)-type cathodes toward higher energy density remains imperative to boost their application feasibility. However, multisodium storage with high stability is difficult to achieve due to the sluggish reaction kinetics, irreversible phase transitions, and negative structural degradation. Herein, a kind of NASICON-type Na2.5V1.5Ti0.5(PO4)3/C (NVTP-0.5) hierarchical microsphere consisting of abundant primary nanoparticles is designed, realizing a reversible 3.2-electron reaction with high stability. The optimized NVTP-0.5 cathode demonstrates an ultrahigh discharge capacity of 192.42 mAh g-1, energy density of up to 497.3 Wh kg-1 at 20 mA g-1, and capacity retention ratio of 94.1% after 1000 cycles at 1 A g-1. Additionally, the NVTP-0.5 cathode delivers excellent tolerance to extreme temperatures while also achieving a high-energy density of 400 Wh kg-1 (based on the cathode mass) in a full-cell configuration. Systematic in situ/ex situ analysis results confirm the multisodium storage processes of NVTP-0.5 involving successive redox reactions (V2+/V3+, Ti3+/Ti4+, and V3+/V4+ redox couples) and reversible structure evolution (solid-solution and biphasic mechanisms), which contribute to the high capacity and excellent cycling stability. This work indicates that the rational regulation of components with different functions can unlock more possibilities for the development of NASICON-type cathodes.

Tuning the Electrolyte and Interphasial Chemistry for All-Climate Sodium-ion Batteries

Sodium-ion batteries (SIBs) present a promising avenue for next-generation grid-scale energy storage. However, realizing all-climate SIBs operating across a wide temperature range remains a challenge due to the poor electrolyte conductivity and instable electrode interphases at extreme temperatures. Here, we propose a comprehensively balanced electrolyte by pairing carbonates with a low-freezing-point and low-polarity ethyl propionate solvent which enhances ion diffusion and Na+-desolvation kinetics at sub-zero temperatures. Furthermore, the electrolyte leverages a combinatorial borate- and nitrile-based additive strategy to facilitate uniform and inorganic-rich electrode interphases, ensuring excellent rate performance and cycle stability over a wide temperature range from -45 °C to 60 °C. Notably, the Na||sodium vanadyl phosphate cell delivers a remarkable capacity of 105 mAh g-1 with a high rate of 2 C at -25 °C. In addition, the cells exhibit excellent cycling stability over a wide temperature range, maintaining a high capacity retention of 84.7 % over 3,000 cycles at 60 °C and of 95.1 % at -25 °C over 500 cycles. The full cell also exhibits impressive cycling performance over a wide temperature range. This study highlights the critical role of electrolyte and interphase engineering for enabling SIBs that function optimally under diverse and extreme climatic environments.

Ion Dynamics at the Intermediate Charging State of the Sodium Vanadium Fluorophosphate Cathode

Na super ionic conductor (NASICON)-type polyanionic vanadium fluorophosphate Na3V2O2(PO4)2F (NVOPF) is a promising cathode material for high-energy sodium-ion batteries. The dynamic diffusion and exchange of sodium ions in the lattice of NVOPF are crucial for its electrochemical performance. However, standard characterizations are mostly focused on the as-synthesized material without cycling, which is different from the actual battery operation conditions. In this work, we investigated the hopping processes of sodium in NVOPF at the intermediate charging state with 23Na solid-state nuclear magnetic resonance (ssNMR) and density functional theory (DFT) calculations. Our experimental characterizations revealed six distinct sodium coordination sites in the intermediate structure and determined the exchange rates among these sites at variable temperatures. The theoretical calculations showed that these dynamic processes correspond to different ion transport pathways in the crystalline lattice. Our combined experimental and theoretical study uncovered the underlying mechanisms of the ion transport in cycled NVOPF and these understandings may help the optimization of cathode materials for sodium-ion batteries.

Fe doping mechanism of Na0.44MnO2 tunnel phase cathode electrode in sodium-ion batteries

Due to its stability and low cost, the tunnel-style sodium-manganese oxide (Na0.44MnO2) material is deemed a popular cathode choice for sodium-ion rechargeable batteries. However, the Jahn-Teller effect caused by Mn3+ in the material results in poor capacity and cycling stability. The purpose of this experimental study is to partially replace Mn3+ with Fe3+, in order to reduce the Jahn-Teller effect of the material during charging and discharging process. The results of Raman spectroscopy and X-ray photoelectron spectroscopy confirmed that the content of Mn3+ decreased after Fe3+ doping. Electrochemical studies show that the Na0.44Mn0.994Fe0.006O2 cathode has better rate performance (exhibits a reversible capacity of 87.9 mAh/g at 2 C) and cycle stability in sodium-ion batteries. The diffusion coefficient of sodium ions increases by Fe3+ doping. The excellent rate performance and capacity improvement are verified by density functional theory (DFT) calculation. After doping, the band gap decreases significantly, and the results show that the state density of O 2p increases near the Fermi level, which promotes the oxidation-reduction of oxygen. This work provides a straightforward approach to enhance the performance of Na0.44MnO2 nanorods, and this performance improvement has guiding significance for the design of other materials in the energy storage domain.

Versatile Nitrogen-Centered Organic Redox-Active Materials for Alkali Metal-Ion Batteries

Versatile nitrogen-centered organic redox-active molecules have gained significant attention in alkali metal-ion batteries (AMIBs) due to their low cost, low toxicity, and ease of preparation. Specially, their multiple reaction categories (anion/cation insertion types of reaction) and higher operating voltage, when compared to traditional conjugated carbonyl materials, underscore their promising prospects. However, the high solubility of nitrogen-centered redox active materials in organic electrolyte and their low electronic conductivity contribute to inferior cycling performance, sluggish reaction kinetics, and limited rate capability. This review provides a detailed overview of nitrogen-centered redox-active materials, encompassing their redox chemistry, solutions to overcome shortcomings, characterization of charge storage mechanisms, and recent progress. Additionally, prospects and directions are proposed for future investigations. It is anticipated that this review will stimulate further exploration of underlying mechanisms and interface chemistry through in situ characterization techniques, thereby promoting the practical application of nitrogen-centered redox-active materials in AMIBs.

Emerging Chemistry for Wide-Temperature Sodium-Ion Batteries

The shortage of resources such as lithium and cobalt has promoted the development of novel battery systems with low cost, abundance, high performance, and efficient environmental adaptability. Due to the abundance and low cost of sodium, sodium-ion battery chemistry has drawn worldwide attention in energy storage systems. It is widely considered that wide-temperature tolerance sodium-ion batteries (WT-SIBs) can be rapidly developed due to their unique electrochemical and chemical properties. However, WT-SIBs, especially for their electrode materials and electrolyte systems, still face various challenges in harsh-temperature conditions. In this review, we focus on the achievements, failure mechanisms, fundamental chemistry, and scientific challenges of WT-SIBs. The insights of their design principles, current research, and safety issues are presented. Moreover, the possible future research directions on the battery materials for WT-SIBs are deeply discussed. Progress toward a comprehensive understanding of the emerging chemistry for WT-SIBs comprehensively discussed in this review will accelerate the practical applications of wide-temperature tolerance rechargeable batteries.

Unveil the origin of voltage oscillation for sodium-ion batteries operating at -40 °C

Voltage oscillation at subzero in sodium-ion batteries (SIBs) has been a common but overlooked scenario, almost yet to be understood. For example, the phenomenon seriously deteriorates the performance of Na3V2(PO4)3 (NVP) cathode in PC (propylene carbonate)/EC (ethylene carbonate)-based electrolyte at -20 °C. Here, the correlation between voltage oscillation, structural evolution, and electrolytes has been revealed based on theoretical calculations, in-/ex-situ techniques, and cross-experiments. It is found that the local phase transition of the Na3V2(PO4)3 (NVP) cathode in PC/EC-based electrolyte at -20 °C should be responsible for the oscillatory phenomenon. Furthermore, the low exchange current density originating from the high desolvation energy barrier in NVP-PC/EC system also aggravates the local phase transformation, resulting in severe voltage oscillation. By introducing the diglyme solvent with lower Na-solvent binding energy, the voltage oscillation of the NVP can be eliminated effectively at subzero. As a result, the high capacity retentions of 98.3% at -20 °C and 75.3% at -40 °C are achieved. The finding provides insight into the abnormal SIBs degradation and brings the voltage oscillation behavior of rechargeable batteries into the limelight.

Electrochemical coupling in subnanometer pores/channels for rechargeable batteries

Subnanometer pores/channels (SNPCs) play crucial roles in regulating electrochemical redox reactions for rechargeable batteries. The delicately designed and tailored porous structure of SNPCs not only provides ample space for ion storage but also facilitates efficient ion diffusion within the electrodes in batteries, which can greatly improve the electrochemical performance. However, due to current technological limitations, it is challenging to synthesize and control the quality, storage, and transport of nanopores at the subnanometer scale, as well as to understand the relationship between SNPCs and performances. In this review, we systematically classify and summarize materials with SNPCs from a structural perspective, dividing them into one-dimensional (1D) SNPCs, two-dimensional (2D) SNPCs, and three-dimensional (3D) SNPCs. We also unveil the unique physicochemical properties of SNPCs and analyse electrochemical couplings in SNPCs for rechargeable batteries, including cathodes, anodes, electrolytes, and functional materials. Finally, we discuss the challenges that SNPCs may face in electrochemical reactions in batteries and propose future research directions.

Routes to high-performance layered oxide cathodes for sodium-ion batteries

Sodium-ion batteries (SIBs) are experiencing a large-scale renaissance to supplement or replace expensive lithium-ion batteries (LIBs) and low energy density lead-acid batteries in electrical energy storage systems and other applications. In this case, layered oxide materials have become one of the most popular cathode candidates for SIBs because of their low cost and comparatively facile synthesis method. However, the intrinsic shortcomings of layered oxide cathodes, which severely limit their commercialization process, urgently need to be addressed. In this review, inherent challenges associated with layered oxide cathodes for SIBs, such as their irreversible multiphase transition, poor air stability, and low energy density, are systematically summarized and discussed, together with strategies to overcome these dilemmas through bulk phase modulation, surface/interface modification, functional structure manipulation, and cationic and anionic redox optimization. Emphasis is placed on investigating variations in the chemical composition and structural configuration of layered oxide cathodes and how they affect the electrochemical behavior of the cathodes to illustrate how these issues can be addressed. The summary of failure mechanisms and corresponding modification strategies of layered oxide cathodes presented herein provides a valuable reference for scientific and practical issues related to the development of SIBs.

Challenges and Breakthroughs in Enhancing Temperature Tolerance of Sodium-Ion Batteries

Lithium-based batteries (LBBs) have been highly researched and recognized as a mature electrochemical energy storage (EES) system in recent years. However, their stability and effectiveness are primarily confined to room temperature conditions. At temperatures significantly below 0 °C or above 60 °C, LBBs experience substantial performance degradation. Under such challenging extreme contexts, sodium-ion batteries (SIBs) emerge as a promising complementary technology, distinguished by their fast dynamics at low-temperature regions and superior safety under elevated temperatures. Notably, developing SIBs suitable for wide-temperature usage still presents significant challenges, particularly for specific applications such as electric vehicles, renewable energy storage, and deep-space/polar explorations, which requires a thorough understanding of how SIBs perform under different temperature conditions. By reviewing the development of wide-temperature SIBs, the influence of temperature on the parameters related to battery performance, such as reaction constant, charge transfer resistance, etc., is systematically and comprehensively analyzed. The review emphasizes challenges encountered by SIBs in both low and high temperatures while exploring recent advancements in SIB materials, specifically focusing on strategies to enhance battery performance across diverse temperature ranges. Overall, insights gained from these studies will drive the development of SIBs that can handle the challenges posed by diverse and harsh climates.

Development of High-Performance Iron-Based Phosphate Cathodes toward Practical Na-Ion Batteries

Iron-based phosphate cathode of Na4Fe3(PO4)2(P2O7) has been regarded as a low-cost and structurally stable cathode material for Na-ion batteries (NIBs). However, their practical application is greatly hindered by the insufficient electrochemical performance and limited energy density. Here, we report a new iron-based phosphate cathode of Na4.5Fe3.5(PO4)2.5(P2O7) with the intergrown heterostructure of the maricite-type NaFePO4 and orthorhombic Na4Fe3(PO4)2(P2O7) phases at a mole ratio of 0.5:1. Benefited from the increased composition ratio and the spontaneous activation of the maricite-type NaFePO4 phase, the as-prepared Na4.5Fe3.5(PO4)2.5(P2O7) composites deliver a reversible capacity over 130 mA h g-1 and energy density close to 400 W h kg-1, which is far beyond that of the single-phase Na4Fe3(PO4)2(P2O7) cathode (∼120 mA h g-1 and ∼350 W h kg-1). Moreover, the kg-level products from the scale-up synthesis demonstrate a stable cycling performance over 2000 times at 3 C in pouch cells. We believe that our findings could show the way forward the practical application of the iron-based phosphate cathodes for NIBs.

One-Step Electrochemical Synthesis of Multiyolk-Shell Nanocoils for Exceptional Photocatalytic Performance

Multiyolk-shell (mYS) nanostructures have garnered significant interest in various photocatalysis applications such as water splitting and waste treatment. Nonetheless, the complexity and rigorous conditions for the synthesis have hindered their widespread implementation. This study presents a one-step electrochemical strategy for synthesizing multiyolk-shell nanocoils (mYSNC), wherein multiple cores of noble metal nanoparticles, such as Au, are embedded within the hollow coil-shaped FePO4 shell structures, mitigating the challenges posed by conventional methods. By capitalizing on the dissimilar dissolution rates of bimetallic alloy nanocoils in an electrochemically programmed solution, nanocoils of different shapes and materials, including two variations of mYSNCs are successfully fabricated. The resulting Au-FePO4 mYSNCs exhibit exceptional photocatalytic performance for environmental remediation, demonstrating up to 99% degradation of methylene blue molecules within 50 min and 95% degradation of tetracycline within 100 min under ultraviolet-visible (UV-vis) light source. This remarkable performance can be attributed to the abundant electrochemical active sites, internal voids facilitating efficient light harvesting with coil morphology, amplified localized surface plasmon resonance (LSPR) at the plasmonic nanoparticle-semiconductor interface, and effective band engineering. The innovative approach utilizing bimetallic alloys demonstrates precise geometric control and design of intricate multicomponent hybrid composites, showcasing the potential for developing versatile hollow nanomaterials for catalytic applications.

Aluminum ion chemistry of Na4Fe3(PO4)2(P2O7) for all-climate full Na-ion battery

Na4Fe3(PO4)2(P2O7) (NFPP) is currently drawing increased attention as a sodium-ion batteries (SIBs) cathode due to the cost-effective and NASICON-type structure features. Owing to the sluggish electron and Na+ conductivities, however, its real implementation is impeded by the grievous capacity decay and inferior rate capability. Herein, multivalent cation substituted microporous Na3.9Fe2.9Al0.1(PO4)2(P2O7) (NFAPP) with wide operation-temperature is elaborately designed through regulating structure/interface coupled electron/ion transport. Greatly, the derived Na vacancy and charge rearrangement induced by trivalent Al3+ substitution lower the ions diffusion barriers, thereby endowing faster electron transport and Na+ mobility. More importantly, the existing Al-O-P bonds strengthen the local environment and alleviate the volume vibration during (de)sodiation, enabling highly reversible valence variation and structural evolution. As a result, remarkable cyclability (over 10,000 loops), ultrafast rate capability (200 C), and exceptional all-climate stability (-40-60 °C) in half/full cells are demonstrated. Given this, the rational work might provide an actionable strategy to promote the electrochemical property of NFPP, thus unveiling the great application prospect of sodium iron mixed phosphate materials.

Entropy-Driven Enhancement of the Conductivity and Phase Purity of Na4Fe3(PO4)2P2O7 as the Superior Cathode in Sodium-Ion Batteries

Na4Fe3(PO4)2(P2O7) (NFPP) is regarded as a promising cathode material for sodium-ion batteries (SIBs) owing to its low cost, easy manufacture, environmental purity, high structural stability, unique three-dimensional Na-ion diffusion channels, and appropriate working voltage. However, for NFPP, the low conductivity of electrons and ions limits their capacity and power density. The generation of NaFeP2O7 and NaFePO4 inhibits the diffusion of sodium ions and reduces reversible capacity and rate performance during the manufacturing process in synthesis methods. Herein, we report an entropy-driven approach to enhance the electronic conductivity and, concurrently, phase purity of NFPP as the superior cathode in sodium-ion batteries. This approach was realized via Ti ions substituting different ratios of Fe-occupied sites in the NFPP lattice (denoted as NTFPP-X, T is the Ti in the lattice, X is the ratio of Ti-substitution) with the configurational entropic increment of the lattice structures from 0.68 R to 0.79 R. Specifically, 5% Ti-substituted lattice (NTFPP-0.05) inducing entropic augmentation not only improves the electronic conductivity from 7.1 × 10-2 S/m to 8.6 × 10-2 S/m but also generates the pure-phase of NFPP (suppressing the impure phases of the NaFeP2O7 and NaFePO4) of the lattice structure, which is validated by a series of characterizations, including powder X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT). Benefiting from the Ti replacement in the lattice, the optimal NTFPP-0.05 composite shows a high first discharge capacity (118.5 mAh g-1 at 0.1 C), superior rate performance (70.5 mAh g-1 at 10 C), and excellent long cycling life (1200 cycles at 10 C with capacity retention of 86.9%). This research proposes a new entropy-driven approach to improve the electrochemical performance of NFPP and reports a low-cost, ultrastable, and high-rate cathode material of NTFPP-0.05 for SIBs.

Fe-modified NASICON-type Na3V2(PO4)3 as a cathode material for sodium ion batteries

The sol-gel method is used to synthesize a new compound called Na3Fe0.8V1.2(PO4)3/C (NFVP/C), which has a crystal structure and belongs to the NASICON-type family. The dimensions of NFVP's unit cell are a = 8.717 (1) Å, c = 21.84 (1) Å, and V = 1437.27 (0) Å3. The Na‖NFVP/C battery provides a discharge potential of 3.43 V compared to Na+/Na, an intriguing rate capability of 76.2 mA h g-1 at 40C, and maintains an impressive capacity of 97.8% after 500 cycles at 5C. The excellent efficiency of Na3Fe0.8V1.2(PO4)3/C can be ascribed to its elevated Na+ conductivity and reduced energy barrier for sodium-ion diffusion. The NASICON-type Na3Fe0.8V1.2(PO4)3/C is a promising material for sodium-ion batteries.

Characterization and Comparative Study of Energy Efficient Mechanochemically Induced NASICON Sodium Solid Electrolyte Synthesis

In recent years, there is growing interest in solid-state electrolytes due to their many promising properties, making them key to the future of battery technology. This future depends among other things on easy processing technologies for the solid electrolyte. The sodium superionic conductor (NASICON) Na3 Zr2 Si2 PO12 is a promising sodium solid electrolyte; however, reported methods of synthesis are time consuming. To this effect, attempt was made to develop a simple time efficient alternative processing route. Firstly, a comparative study between a new method and commonly reported methods was carried out to gain a clear insight into the mechanism of formation of sodium superionic conductors (NASICON). It was observed that through a careful selection of precursors, and the use of high-energy milling (HEM) the NASICON conversion process was enhanced and optimized, this reduces the processing time and required energy, opening up a new alternative route for synthesis. The obtained solid electrolyte was stable during Na cycling vs. Na-metal at 1 mA cm-1 , and a room temperature conductivity of 1.8 mS cm-1 was attained.

Achieving Fast and Stable Sodium Storage in Na4 Fe3 (PO4 )2 (P2 O7 ) via Entropy Engineering

Na4 Fe3 (PO4 )2 (P2 O7 ) (NFPP) has been considered a promising cathode material for sodium-ion batteries (SIBs) owing to its environmental friendliness and economic viability. However, its electrochemical performance is constrained by connatural low electronic conductivity and inadequate sodium ion diffusion. Herein, a high-entropy substitution strategy is employed in NFPP to address these limitations. Ex situ X-ray diffraction analysis reveals a single-phase electrochemical reaction during the sodiation/desodiation processes and the increased configurational entropy in HE-NFPP endows an enhanced structure, which results in a minimal volume variation of only 1.83%. Kinetic analysis and density functional theory calculation further confirm that the orbital hybrid synergy of high-entropy transition metals offers a favorable electronic structure, which efficaciously boosts the charge transfer kinetics and optimizes the sodium ion diffusion channel. Based on this versatile strategy, the as-prepared high-entropy Na4 Fe2.5 Mn0.1 Mg0.1 Co0.1 Ni0.1 Cu0.1 (PO4 )2 (P2 O7 ) (HE-NFPP) cathode can deliver a prominent rate performance of 55 mAh g-1 at 10 A g-1 and an ultra-long cycling lifespan of over 18 000 cycles at 5 A g-1 . When paired with a hard carbon (HC) anode, HE-NFPP//HC full cell exhibits a favorable cycling durability of 1000 cycles. This high-entropy engineering offers a feasible route to improve the electrochemical performance of NFPP and provides a blueprint for exploring high-performance SIBs.

Anion Substitution Strategy toward an Advanced NASICON-Na4Fe3(PO4)2P2O7 Cathode for Sodium-Ion Batteries

Superior sodium-ion batteries (SIBs) greatly need cathode materials with higher capacity and better durability. Herein, the anion group substitution strategy is proposed to design a cathode material with extraordinary Na+ storage performance, NASICON-Na4Fe3(PO4)1.9(SiO4)0.1P2O7 (NFPP-Si0.1). The experimental and theoretical research revealed that modification in the local structure by anion substitution significantly boosts the ionic/electronic transfer kinetics via optimizing the electronic conductivity and reducing the Na+ diffusion energy barrier. Furthermore, the SiO44- substitution generates a slight expansion of the crystal lattice to broaden the Na+ diffusion channel. Specifically, the custom-designed NFPP-Si0.1 could deliver a high rate capability of 77.6 mAh g-1 at constant 50 C charge-discharge and excellent recyclability of 79.4% retention rate after 7000 cycles at 10 C. Besides, it also possesses outstanding low temperature reversible capacity of 95.5 mAh g-1 at 0.1 C and long-term cyclability of 93.6% capacity retention after 1000 cycles at 5 C in -10 °C. This strategy of heterogeneous and isostructural anion group substitution provides a method for unlocking high-rate and long-life-span mixed polyanionic cathodes.

Challenges and Advances in Rechargeable Batteries for Extreme-Condition Applications

Rechargeable batteries are widely used as power sources for portable electronics, electric vehicles and smart grids. Their practical performances are, however, largely undermined under extreme conditions, such as in high-altitude drones, ocean exploration and polar expedition. These extreme environmental conditions not only bring new challenges for batteries but also incur unique battery failure mechanisms. To fill in the gap, it is of great importance to understand the battery failure mechanisms under different extreme conditions and figure out the key parameters that limit battery performances. In this review, the authors start by investigating the key challenges from the viewpoints of ionic/charge transfer, material/interface evolution and electrolyte degradation under different extreme conditions. This is followed by different engineering approaches through electrode materials design, electrolyte modification and battery component optimization to enhance practical battery performances. Finally, a short perspective is provided about the future development of rechargeable batteries under extreme conditions.

Reversible Multielectron Redox Chemistry in a NASICON-Type Cathode toward High-Energy-Density and Long-Life Sodium-Ion Full Batteries

Na-superionic-conductor (NASICON)-type cathodes (e.g., Na3 V2 (PO4 )3 ) have attracted extensive attention due to their open and robust framework, fast Na+ mobility, and superior thermal stability. To commercialize sodium-ion batteries (SIBs), higher energy density and lower cost requirements are urgently needed for NASICON-type cathodes. Herein, Na3.5 V1.5 Fe0.5 (PO4 )3 (NVFP) is designed by an Fe-substitution strategy, which not only reduces the exorbitant cost of vanadium, but also realizes high-voltage multielectron reactions. The NVFP cathode can deliver extraordinary capacity (148.2 mAh g-1 ), and decent cycling durability up to 84% after 10 000 cycles at 100 C. In situ X-ray diffraction and ex situ X-ray photoelectron spectroscopy characterizations reveal reversible structural evolution and redox processes (Fe2+ /Fe3+ , V3+ /V4+ , and V4+ /V5+ ) during electrochemical reactions. The low ionic-migration energy barrier and ideal Na+ -diffusion kinetics are elucidated by density functional theory calculations. Combined with electron paramagnetic resonance spectroscopy, Fe with unpaired electrons in the 3d orbital is inseparable from the higher-valence redox activation. More competitively, coupling with a hard carbon (HC) anode, HC//NVFP full cells demonstrate high-rate capability and long-duration cycling lifespan (3000 stable cycles at 50 C), along with material-level energy density up to 304 Wh kg-1 . The present work can provide new perspectives to accelerate the commercialization of SIBs.

Perspective on Iron-Based Phosphate Cathode for Commercial Sodium-Ion Cells

Sodium (Na)-ion batteries (SIBs) have been considered as a potential device for large-scale energy storage. To date, some start-up companies have released their first-generation SIBs cathode materials. Among them, phosphate compounds, particularly iron (Fe)-based mixed phosphate compounds, present great potential for commercial SIBs owing to its low cost, environment friendly. In this perspective, a brief historical retrospect is first introduce to the development of Fe-based mixed phosphate cathodes in SIBs. Then, the recent development about this kind of cathode has been summarized. One of the iron-based phosphate materials, Na3 Fe2 (PO4 )P2 O7 , is used as an example to roughly calculate the energy density and estimate the cost at the cell level to highlight their advantages. Finally, some strategies are put up to further increase the energy density of SIBs. This timely perspective aims to educate the community on the critical benefits of the Fe-based mixed phosphate cathode and provide an up-to-date overview of this emerging field.

Enhancing Oxygen Reduction on Fe Single-Atom Catalysts by Tuning Noncovalent Interactions in Electrode/Electrolyte Interfaces

Highly efficient electrochemical interfaces are significant for the oxygen reduction reaction (ORR). However, previous efforts have been mainly paid to design catalytic sites with high intrinsic activity and neglect the electrode/electrolyte interfaces, especially the noncovalent interactions in the outer Helmholtz plane (OHP). Herein, an Fe-N-C single-atom catalyst is synthesized and acts as the model catalyst to demonstrate the effect of noncovalent interactions on the ORR performance. Two specific molecules of THA+ and TEA+ with different structures and functional groups have been selected to tune the OHP through noncovalent interactions. TEA+ can adjust the OHP, improve the oxygen diffusion coefficient, and increase the double-layer capacitance. Therefore, TEA+ enhances the activity, selectivity, and stability of Fe-N-C single-atom catalysts toward the ORR. This provides a new approach to finding new directions in designing electrochemical interfaces beyond the intrinsic catalytic sites in acidic electrolytes.

Carbon-Based Composites with Mixed Phosphate-Pyrophosphates with Improved Electrochemical Performance at Elevated Temperature

Sodium iron phosphate-pyrophosphate, Na4Fe3(PO4)2P2O7 (NFPP) emerges as an excellent cathode material for sodium-ion batteries. Because of lower electronic conductivity, its electrochemical performance depends drastically on the synthesis method. Herein, we provide a simple and unified method for synthesis of composites between NFPP and reduced graphene oxide (rGO) and standard carbon black, designed as electrode materials for both sodium- and lithium-ion batteries. The carbon additives affect only the morphology and textural properties of the composites. The performance of composites in sodium and lithium cells is evaluated at elevated temperatures. It is found that NFPP/rGO outperforms NFPP/C in both Na and Li storage due to its hybrid mechanism of energy storage. In sodium half-cells, NFPP/rGO delivers a reversible capacity of 95 mAh/g at 20 °C and 115 mAh/g at 40 °C with a cycling stability of 95% and 88% at a rate of C/2. In lithium half-cells, the capacity reaches a value of 120 mAh/g at 20 and 40 °C, but the cycling stability becomes worse, especially at 40 °C. The electrochemical performance is discussed on the basis of ex situ XRD and microscopic studies. The good Na storage performance of NFPP/rGO at an elevated temperature represents a first step towards its commercialization.

Boosting the Ultrastable High-Na-Content P2-type Layered Cathode Materials with Zero-Strain Cation Storage via a Lithium Dual-Site Substitution Approach

P2-type layered transition-metal (TM) oxides, NaxTMO2, are highly promising as cathode materials for sodium-ion batteries (SIBs) due to their excellent rate capability and affordability. However, P2-type NaxTMO2 is afflicted by issues such as Na+/vacancy ordering and multiple phase transitions during Na-extraction/insertion, leading to staircase-like voltage profiles. In this study, we employ a combination of high Na content and Li dual-site substitution strategies to enhance the structural stability of a P2-type layered oxide (Na0.80Li0.024[Li0.065Ni0.22Mn0.66]O2). The experimental results reveal that these approaches facilitate the oxidation of Mn ions to a higher valence state, thereby affecting the local environment of both TM and Na ions. The resulting modification in the local structure significantly improves the Na-ion storage capabilities as required for cathode materials in SIBs. Furthermore, it induces a solid-solution reaction and enables nearly zero-strain operation (ΔV = 0.7%) in the Na0.80Li0.024[Li0.065Ni0.22Mn0.66]O2 cathode during cycling. The assembled full cells demonstrate an exceptional rate performance, with a retention rate of 87% at 10 C compared to that of 0.1 C, as well as an ultrastable cycling capability, maintaining a capacity retention of 73% at 2 C after 1000 cycles. These findings offer valuable insights into the electronic and structural chemistry of ultrastable cathode materials with "zero-strain" Na-ion storage.

Boron-Doping Induced Electron Delocalization in Fluorophosphate Cathode: Enhanced Na-Ion Diffusivity and Sodium-Ion Full Cell Performance

Na3 V2 (PO4 )2 O2 F (NVPOF) is widely accepted as advanced cathode material for sodium-ion batteries with high application prospects ascribing to its considerable specific capacity and high working voltage. However, challenges in the full realization of its theoretical potential lie in the novel structural design to accelerate its Na+ diffusivity. Herein, considering the important role of polyanion groups in constituting Na+ diffusion tunnels, boron (B) is doped at the P-site to obtain Na3 V2 (P2- x Bx O8 )O2 F (NVP2- x Bx OF). As evidenced by density functional theory modeling, B-doping induces a dramatic decrease in the bandgap. Delocalization of electrons on the O anions in BO4 tetrahedra is observed in NVP2- x Bx OF, which dramatically lowers the electrostatic resistance experienced by Na+ . As a result, the Na+ diffusivity in the NVP2- x Bx OF cathode has accelerated up to 11 times higher, which secures a high rate property (67.2 mAh g-1 at 60 C) and long cycle stability (95.9% capacity retention at 108.6 mAh g-1 at 10 C after 1000 cycles). The assembled NVP1.90 B0.10 OF//Se-C full cell demonstrates exceptional power/energy density (213.3 W kg-1 @ 426.4 Wh kg-1 and 17970 W kg-1 @ 119.8 Wh kg-1 ) and outstanding capability to withstand long cycles (90.1% capacity retention after 1000 cycles at 105.3 mAh g-1 at 10 C).

"Mn-locking" effect by anionic coordination manipulation stabilizing Mn-rich phosphate cathodes

High-voltage cathodes with high power and stable cyclability are needed for high-performance sodium-ion batteries. However, the low kinetics and inferior capacity retention from structural instability impede the development of Mn-rich phosphate cathodes. Here, we propose light-weight fluorine (F) doping strategy to decrease the energy gap to 0.22 eV from 1.52 eV and trigger a "Mn-locking" effect-to strengthen the adjacent chemical bonding around Mn as confirmed by density functional theory calculations, which ensure the optimized Mn ligand framework, suppressed Mn dissolution, improved structural stability and enhanced electronic conductivity. The combination of in situ and ex situ techniques determine that the F dopant has no influence on the Na+ storage mechanisms. As a result, an outstanding rate performance up to 40C and an improved cycling stability (1000 cycles at 20C) are achieved. This work presents an effective and widely available light-weight anion doping strategy for high-performance polyanionic cathodes.

Manganese Local Environment Modulation via SiO4 Substitution to Boost Sodium Storage Performance of Na4 MnCr(PO4 )3

Manganese-based Na superionic conductors (NASICONs) Na₄ MnCr(PO₄ )₃ with three-electron reaction are attractive cathode materials for sodium-ion batteries. However, the irreversible distortion of Mn local structure leads to sluggish electrode kinetics, voltage hysteresis, and poor cycling stability. Here, SiO₄ is introduced to substitute PO₄ to modulate the local environment of Mn to activate the redox activity and stabilize the reversibility of Na₄ MnCr(PO₄ )_2.9 (SiO₄ )_0.1 (NMCP-Si). A combined experimental and theoretical investigation have been undertaken to reveal the evolution of electronic structures and Na storage properties associated with SiO₄ substitution. The NMCP-Si exhibits much-enhanced rate capability and cycling stability, being attributed to the unique Jahn-Teller distortion (Mn³⁺ ) that facilitates sodium de/insertion kinetics by optimizing the Na ion diffusion channels. This work addresses the challenge of stabilizing the structure of Mn-based NASICONs and represents a breakthrough in understanding how to improve the Na⁺ conductivity by regulating local structure.

Pearl-Structure-Enhanced NASICON Cathode toward Ultrastable Sodium-Ion Batteries

Based on the favorable ionic conductivity and structural stability, sodium superionic conductor (NASICON) materials especially utilizing multivalent redox reaction of vanadium are one of the most promising cathodes in sodium-ion batteries (SIBs). To further boost their application in large-scale energy storage production, a rational strategy is to tailor vanadium with earth-abundant and cheap elements (such as Fe, Mn), reducing the cost and toxicity of vanadium-based NASICON materials. Here, the Na_3.05 V_1.03 Fe_0.97 (PO₄ )₃ (NVFP) is synthesized with highly conductive Ketjen Black (KB) by ball-milling assisted sol-gel method. The pearl-like KB branch chains encircle the NVFP (p-NVFP), the segregated particles possess promoted overall conductivity, balanced charge, and modulated crystal structure during electrochemical progress. The p-NVFP obtains significantly enhanced ion diffusion ability and low volume change (2.99%). Meanwhile, it delivers a durable cycling performance (87.7% capacity retention over 5000 cycles at 5 C) in half cells. Surprisingly, the full cells of p-NVFP reveal a remarkable capability of 84.9 mAh g^-1 at 20 C with good cycling performance (capacity decay rate is 0.016% per cycle at 2 C). The structure modulation of the p-NVFP provides a rational design on the superiority of others to be put into practice.

A High-Energy NASICON-Type Na3.2 MnTi0.8 V0.2 (PO4 )3 Cathode Material with Reversible 3.2-Electron Redox Reaction for Sodium-Ion Batteries

Na superionic conductor (NASICON) structured cathode materials with robust structural stability and large Na⁺ diffusion channels have aroused great interest in sodium-ion batteries (SIBs). However, most of NASICON-type cathode materials exhibit redox reaction of no more than three electrons per formula, which strictly limits capacity and energy density. Herein, a series of NASICON-type Na_3+x MnTi_1-x V_x (PO₄ )₃ cathode materials are designed, which demonstrate not only a multi-electron reaction but also high voltage platform. With five redox couples from V^5+/4+ (≈4.1 V), Mn^4+/3+ (≈4.0 V), Mn^3+/2+ (≈3.6 V), V^4+/3+ (≈3.4 V), and Ti^4+/3+ (≈2.1 V), the optimized material, Na_3.2 MnTi_0.8 V_0.2 (PO₄ )₃ , realizes a reversible 3.2-electron redox reaction, enabling a high discharge capacity (172.5 mAh g^-1 ) and an ultrahigh energy density (527.2 Wh kg^-1 ). This work sheds light on the rational construction of NASICON-type cathode materials with multi-electron redox reaction for high-energy SIBs.

Conductive Ti3C2Tx networks to optimize Na3V2O2(PO4)2F cathodes for improved rate capability and low-temperature operation

Na₃V₂O₂(PO₄)₂F (NVOPF) is gaining attention as a high-energy cathode candidate for sodium-ion batteries owing to its wide operating voltage, high energy density and excellent thermal stability. However, its intrinsic poor electrical conductivity results in its current sodium-storage performance being far below expectations. Herein, two-dimensional Ti₃C₂T_x MXene nanosheets with excellent electrical conductivity are introduced to construct an interconnected conductive framework to tightly encapsulate NVOPF nanoparticles. The Ti₃C₂T_x nanosheets ensure superior electronic contacts, along with inhibiting the agglomeration of NVOPF nanoparticles, thus accelerating electron and ion transfer during sodium-ion de/intercalation and maximizing the storage capacity. As a result, the optimized NVOPF/Ti₃C₂T_x cathode exhibits high rate capabilities (111 mA h g^-1 at 0.2 C and 78 mA h g^-1 at 20 C), with an impressively high capacity retention of 74.8% over a wide temperature range (from -20 to 20 °C). Additionally, the assembled sodium-ion full cell provides a highly reversible capacity of 116 mA h g^-1 at 1 C, with a capacity retention of 67.2% after 100 cycles. These inspiring results provide new insights for improving the charge-transfer kinetics of the NVOPF cathode and this methodology may be extended to other cathode materials.

Na2ZrFe(PO4)3─A Rhombohedral NASICON-Structured Material: Synthesis, Structure and Na-Intercalation Behavior

A NASICON-structured earth-abundant mixed transition metal (T_M) containing Na-T_M-phosphate, viz., Na₂ZrFe(PO₄)₃, has been prepared via a sol-gel route using a low-cost Fe³⁺-based precursor. The as-prepared material crystallizes in the desired rhombohedral NASICON structure (space group: R3̅c) at room temperature. Synchrotron X-ray diffraction (XRD), transmission electron microscopy, X-ray absorption spectroscopy, etc., have been performed to determine the crystal structure, associated details, composition, and electronic structures. In light of the structural features, as one of the possible functionalities of Na₂FeZr(PO₄)₃, Na-intercalation/deintercalation has been examined, which indicates the occurrence of reversible electrochemical Na-insertion/extraction via Fe²⁺/Fe³⁺ redox at an average potential of ∼2.5 V. The electrochemical data and direct evidences from operando synchrotron XRD indicate that the rhombohedral structure is preserved during Na-insertion/extraction, albeit within a certain range of Na-content (i.e., ∼2-3 p.f.u.), beyond which rhombohedral → monoclinic transformation takes place. Within this range, Na-insertion/extraction takes place via solid-solution pathway, resulting in outstanding cyclic stability, higher Na-diffusivity, and good rate-capability. To the best of the authors' knowledge, this represents the first in-depth structural, compositional, and electrochemical studies with Na₂ZrFe(PO₄)₃, along with the interplay between those, which provide insights into the design of similar low-cost materials for various applications, including sustainable electrochemical energy storage systems.

P2-Type Moisture-Stable and High-Voltage-Tolerable Cathodes for High-Energy and Long-Life Sodium-Ion Batteries

P2-Na_0.67Ni_0.33Mn_0.67O₂ represents a promising cathode for Na-ion batteries, but it suffers from severe structural degradation upon storing in a humid atmosphere and cycling at a high cutoff voltage. Here we propose an in situ construction to achieve simultaneous material synthesis and Mg/Sn cosubstitution of Na_0.67Ni_0.33Mn_0.67O₂ via one-pot solid-state sintering. The materials exhibit superior structural reversibility and moisture insensitivity. In-operando XRD reveals an essential correlation between cycling stability and phase reversibility, whereas Mg substitution suppressed the P2-O2 phase transition by forming a new Z phase, and Mg/Sn cosubstitution enhanced the P2-Z transition reversibility benefiting from strong Sn-O bonds. DFT calculations disclosed high chemical tolerance to moisture, as the adsorption energy to H₂O was lower than that of the pure Na_0.67Ni_0.33Mn_0.67O₂. A representative Na_0.67Ni_0.23Mg_0.1Mn_0.65Sn_0.02O₂ cathode exhibits high reversible capacities of 123 mAh g^-1 (10 mA g^-1), 110 mAh g^-1 (200 mA g^-1), and 100 mAh g^-1 (500 mA g^-1) and a high capacity retention of 80% (500 mA g^-1, 500 cycles).

Enhanced Kinetic Behaviors of Hollow MoO2/MoS2 Nanospheres for Sodium-Ion-Based Energy Storage

Mo-based heterostructures offer a new strategy to improve the electronics/ion transport and diffusion kinetics of the anode materials for sodium-ion batteries (SIBs). MoO₂/MoS₂ hollow nanospheres have been successfully designed via in-situ ion exchange technology with the spherical coordination compound Mo-glycerates (MoG). The structural evolution processes of pure MoO₂, MoO₂/MoS₂, and pure MoS₂ materials have been investigated, illustrating that the structureofthenanospherecan be maintained by introducing the S-Mo-S bond. Based on the high conductivity of MoO₂, the layered structure of MoS₂ and the synergistic effect between components, as-obtained MoO₂/MoS₂ hollow nanospheres display enhanced electrochemical kinetic behaviors for SIBs. The MoO₂/MoS₂ hollow nanospheres achieve a rate performance with 72% capacity retention at a current of 3200 mA g^-1 compared to 100 mA g^-1. The capacity can be restored to the initial capacity after a current returns to 100 mA g^-1, while the capacity fading of pure MoS₂ is up to 24%. Moreover, the MoO₂/MoS₂ hollow nanospheres also exhibit cycling stability, maintaining a stable capacity of 455.4 mAh g^-1 after 100 cycles at a current of 100 mA g^-1. In this work, the design strategy for the hollow composite structure provides insight into the preparation of energy storage materials.

Three-Dimensional Holey Graphene Modified Na4 Fe3 (PO4 )2 (P2 O7 )/C as a High-Performance Cathode for Rechargeable Sodium-Ion Batteries

Polyanion-type Na₄ Fe₃ (PO₄ )₂ (P₂ O₇ ) (NFPP) is a promising cathode material for sodium-ion batteries due to its low cost and high safety. Herein, a three-dimensional (3D) holey graphene (HG) modified NFPP/C material (NFPPCHG) has been successfully prepared by a simple and scalable ball milling strategy with sodium phytate and ferrous oxalate as precursors. The introduction of HG can obviously improve the specific surface area, electronic conductivity, and ions transport performance of NFPPCHG and largely enhance its electrochemical properties. The prepared NFPPCHG delivers a high reversible capacity of 118 mAh g^-1 at 0.2 C and keeps a considerable capacity of 53 mAh g^-1 even at an ultrahigh rate of 100 C. NFPPCHG also shows excellent performance at 55 °C and -20 °C. Moreover, in situ distribution of relaxation time analysis further demonstrates NFPPCHG has superior electrochemical kinetics. In addition, the HC//NFPPCHG full cell displays good performance, suggesting great potential of the prepared material for practical applications.

A Disordered Rubik's Cube-Inspired Framework for Sodium-Ion Batteries with Ultralong Cycle Lifespan

Sodium-ion batteries (SIBs) with fast-charge capability and long lifespan could be applied in various sustainable energy storage systems, from personal devices to grid storage. Inspired by the disordered Rubik's cube, here, we report that the high-entropy (HE) concept can lead to a very substantial improvement in the sodium storage properties of hexacyanoferrate (HCF). An example of HE-HCF has been synthesized as a proof of concept, which has achieved impressive cycling stability over 50 000 cycles and an outstanding fast-charging capability up to 75 C. Remarkable air stability and all-climate performance are observed. Its quasi-zero-strain reaction mechanism and high sodium diffusion coefficient have been measured and analyzed by multiple in situ techniques and density functional theory calculations. This strategy provides new insights into the development of advanced electrodes and provides the opportunity to tune electrochemical performance by tailoring the atomic composition.

Doping Regulation in Polyanionic Compounds for Advanced Sodium-Ion Batteries

It has long been the goal to develop rechargeable batteries with low cost and long cycling life. Polyanionic compounds offer attractive advantages of robust frameworks, long-term stability, and cost-effectiveness, making them ideal candidates as electrode materials for grid-scale energy storage systems. In the past few years, various polyanionic electrodes have been synthesized and developed for sodium storage. Specifically, doping regulation including cation and anion doping has shown a great effect in tailoring the structures of polyanionic electrodes to achieve extraordinary electrochemical performance. In this review, recent progress in doping regulation in polyanionic compounds as electrode materials for sodium-ion batteries (SIBs) is summarized, and their underlying mechanisms in improving electrochemical properties are discussed. Moreover, challenges and prospects for the design of advanced polyanionic compounds for SIBs are put forward. It is anticipated that further versatile strategies in developing high-performance electrode materials for advanced energy storage devices can be inspired.

Bimetal Substitution Enabled Energetic Polyanion Cathode for Sodium-Ion Batteries

The practical application of Na-superionic conductor structured materials is hindered by limited energy density and structure damage upon activating the third Na⁺. We propose a bimetal substitution strategy with cheaper Fe and Ni elements for costive vanadium in the polyanion to improve both ionic and electronic conductivities, and a single two-phase reaction during Na⁺ intercalation/deintercalation and much reduced Na⁺ diffusion barrier are uncovered by ex-situ X-ray diffraction and density functional theory calculations. Thus, the obtained cathode, Na₃Fe_0.8VNi_0.2(PO₄)₃, shows excellent electrochemical performances including high specific capacity (102.2 mAh g^-1 at 0.1C), excellent rate capability (79.3 mAh g^-1 at 20C), cycling stability (84.6% of capacity retention over 1400 cycles at 20C), low-temperature performance (89.7 mAh g^-1 at 2C and -10 °C), and structure stability in an extended voltage window for the third Na⁺ utilization. A competitive energy density of ≈287 Wh kg^-1 for full batteries based on cathode and anode materials is also confirmed.

Recent Progress and Perspective: Na Ion Batteries Used at Low Temperatures

With the rapid development of electric power, lithium materials, as a rare metal material, will be used up in 50 years. Sodium, in the same main group as lithium in the periodic table, is abundant in earth's surface. However, in the study of sodium-ion batteries, there are still problems with their low-temperature performance. Its influencing factors mainly include three parts: cathode material, anode material, and electrolyte. In the cathode, there are Prussian blue and Prussian blue analogues, layered oxides, and polyanionic-type cathodes in four parts, as this paper discusses. However, in the anode, there is hard carbon, amorphous selenium, metal selenides, and the NaTi₂(PO₄)₃ anode. Then, we divide the electrolyte into four parts: organic electrolytes; ionic liquid electrolytes; aqueous electrolytes; and solid-state electrolytes. Here, we aim to find electrode materials with a high specific capacity of charge and discharge at lower temperatures. Meanwhile, high-electrical-potential cathode materials and low-potential anode materials are also found. Furthermore, their stability in air and performance degradation in full cells and half-cells are analyzed. As for the electrolyte, despite the aspects mentioned above, its electrical conductivity in low temperatures is also reported.

Ultra-fast green microwave assisted synthesis of NaFePO4-C nanocomposites for sodium ion batteries and supercapacitors

Sodium ion batteries are favored in stationary and large scale power storage due to their low cost and nontoxicity. As the lithium is replaced with sodium due to the cost motive, a cheap processing method is needed to maintain the cell price as low as possible. We report an ultra-fast synthesis method that utilizes the high microwave absorbance of silicon carbide content in rice straw ash. Amorphous/maricite mixtures of sodium iron phosphates-carbon composites (NaFePO₄-C) are synthesized, crystallized, and carbon coated using one-step microwave heating. The sodium ion electroactive composites are prepared using different microwave heating durations ranging from 30 to 100 s. High purity inert gases are not needed during synthesis, processing, and even at cell assembly. The materials are characterized by elemental analysis techniques, X-ray diffraction (XRD), scanning/transmission electron microscope (SEM/TEM), and Raman spectroscopy. The electrochemical performance of the synthesized nanocomposites is examined as sodium ion battery cathode and as symmetric supercapacitors. The optimum synthesis time is 60 s for the application as sodium ion batteries and as a supercapacitor. The maximum specific capacity is 108.4 mA h g^-1 at 0.2 C in the case of using it as a battery cathode. While the capacitance is 86 F g^-1 at 0.5 A g^-1 as a supercapacitor. The capacity retention is 92.85% after 40 cycles at 0.2 C as sodium ion battery electrode. For supercapacitor, the capacity retention is 81.7% after 1000 cycles.

Stabilized Multi-Electron Reactions in a High-Energy Na4 Mn0.9 CrMg0.1 (PO4 )3 Sodium-Storage Cathode Enabled by the Pinning Effect

Na superionic conductor (NASICON)-type Na₄ MnCr(PO₄ )₃ has attracted extensive attention among the phosphate sodium-storage cathodes due to its ultra-high energy density originating from three-electron reactions but it suffers from severe structural degradation upon repeated sodiation/desodiation processes. Herein, Mg is used for partial substitution of Mn in Na₄ MnCr(PO₄ )₃ to alleviate Jahn-Teller distortions and to prolong the cathode cycling life by virtue of the pinning effect induced by implanting inert MgO₆ octahedra into the NASICON framework. The as-prepared Na₄ Mn_0.9 CrMg_0.1 (PO₄ )₃ /C cathode delivers high capacity retention of 92.7% after 500 cycles at 5 C and fascinating rate capability of 154.6 and 70.4 mAh g^-1 at 0.1 and 15 C, respectively. Meanwhile, it can provide an admirable energy density of ≈558.48 Wh kg^-1 based on ≈2.8-electron reactions of Mn²⁺ /Mn³⁺ , Mn³⁺ /Mn⁴⁺ , and Cr³⁺ /Cr⁴⁺ redox couples. In situ X-ray diffraction reveals the highly reversible single-phase and bi-phase structural evolution of such cathode materials with a volume change of only 6.3% during the whole electrochemical reaction. The galvanostatic intermittent titration technique and density functional theory computations jointly demonstrate the superior electrode process kinetics and enhanced electronic conductivity after Mg doping. This work offers a new route to improve the cycling stability of the high-energy NASICON-cathodes for sodium-ion batteries.

Unravelling capacity fading mechanisms in sodium vanadyl phosphate for aqueous sodium-ion batteries

Na₃V₂(PO₄)₃ (NVP), which is known as a sodium superionic conductor (NASICON), has been successfully developed as an excellent cathode material for sodium-ion batteries (SIBs). However, the capacity of NVP quickly fades when used in an aqueous electrolyte. Herein, the charge storage and capacity attenuation mechanisms of carbon-coated NVP (NVP@C) were carefully investigated by systematic material characterization and density functional theory (DFT) calculations. According to the results, protons in the aqueous electrolyte diffuse into the surface of NVP@C to occupy the sodium site and attack the nearby phosphates during the charge-discharge cycles, leading to the deformation and breakage of the POV bond. The distorted phosphates on the surface of NVP@C gradually dissolve into the electrolyte, causing a decrease in capacity. To stabilize the phosphates on the surface of NVP, DFT calculations suggest that iron doping of NVP can effectively relieve the deformation of the POV bond and suppress the capacity decay. The as-prepared Na₃V_1.5Fe_0.5(PO₄)₃@C (NV_1.5Fe_0.5P@C) has a capacity retention of 95% in the first ten cycles, while NVP@C retains only 55% of the initial capacity in the same number of cycles.

High-Efficiency and Stable Zn-Na3 V2 (PO4 )3 Aqueous Battery Enabled by Electrolyte-Induced Interphasial Engineering

Aqueous zinc batteries have been regarded as a promising energy storage technology due to their high energy, high material abundance, low toxicity, and intrinsic safety. NASICON-type materials have been proposed as efficient cathodes for rechargeable batteries, yet they suffer from fast degradation and low Coulombic efficiency in aqueous batteries. Here we demonstrate that a rationally designed aqueous electrolyte containing a supporting Na salt and polymer additive can efficiently suppress the water activity through hydrogen bonding and facilitate the anion involvement in interfacial reactions, thus enabling the stable operation of sodium superionic conductor (NASICON) cathodes in aqueous zinc batteries. As exemplified by a Na₃ V₂ (PO₄ )₃ cathode, the cell with zinc metal anode exhibits high cycling Coulombic efficiencies (around 99.9 % in average) with a steady output voltage and capacity retention for 300 cycles. This work addresses the potential issues with NASICON-type cathodes in aqueous zinc batteries and proposes an effective solution via fundamental interphasial chemistry to design efficient and sustainable aqueous electrolytes.

Ultrafast Synthesis of Layered Transition-Metal Oxide Cathodes from Metal-Organic Frameworks for High-Capacity Sodium-Ion Batteries

Layered transition-metal oxides are promising candidate cathode materials for sodium-ion batteries due to their abundant raw materials and high theoretical capacity. Nevertheless, a long-time high-temperature heat treatment is required in traditional preparation methods, leading to low synthesis efficiency and waste of energy. Herein, an ultrafast preparation method of layered transition-metal oxides was proposed through minute calcination of metal-organic frameworks (MOFs). The homogeneous distribution of different atoms in MOFs allows fast phase transition during the calcination process. P'2-phase layered sodium manganese oxide was successfully obtained and demonstrated excellent electrochemical performance, with a high reversible capacity of 212 mA h g^-1 and a cycling performance of 84% capacity retention after 100 cycles. Furthermore, this method can be expanded to a wide variety of MOF precursors and oxide electrode materials for different types of batteries. Our findings provide an efficient and cost-effective synthesis method for high-performance layered transition-metal oxide cathodes.