Silica accelerates the selective hydrogenation of CO2 to methanol on cobalt catalysts

Constructing extrinsic oxygen vacancy on the surface of photocatalyst as CO2 and electrons reservoirs to improve photocatalytic CO2 reduction activity

Constructing own oxygen vacancies in the photocatalysts is a very promising method to improve their photocatalytic CO2 reduction activity. However, some catalysts have excellent stabilities, making it difficult for them to construct their own oxygen vacancies. To simplify the above difficulty of stable photocatalysts, constructing extrinsic oxygen vacancies on their surface as a novel idea is proposed. Here, a stable TiO2 nanosheet is chosen as a research object, we uniformly deposited BiOCl quantum dots on their surface via a simple adsorption-deposition method. It is found that BiOCl quantum dots are able to simultaneously self-transform into defective BiOCl with many oxygen vacancies when the photocatalyst is performed photocatalytic CO2 reduction. These extrinsic oxygen vacancies can act as "CO2 and photo-generated electrons reservoirs" to improve CO2 capture and accelerate the separation of photogenerated electrons and holes. For the above reasons, the modified TiO2 showed obvious enhancement of photocatalytic CO2 reduction compared to pristine TiO2 and BiOCl. This work may open a new avenue to broaden the use of oxygen vacancies in the process of photocatalytic CO2 reduction.

Boosting oxygen vacancies by modulating the morphology of Au decorated In2O3 with enhanced CO2 hydrogenation activity to CH3OH

CO2 hydrogenation to methanol has become one of the most promising ways for CO2 utilization, however, the CO2 conversion rate and methanol selectivity of this reaction still need to be improved for industrial application. Here we investigated the structure-activity relationship for CO2 conversion to methanol of In2O3-based catalysts by modulating morphology and decorating Au. Three different Au/In2O3 catalysts were prepared, their activity follow the sequence of Au/In2O3-nanosphere (Au/In2O3-NS) > Au/In2O3-nanoplate (Au/In2O3-NP) > Au/In2O3-hollow microsphere (Au/In2O3-HM). Au/In2O3-NS exhibited the best performance with good CO2 conversion of 12.7%, high methanol selectivity of 59.8%, and large space time yield of 0.32 gCH3OH/(hr·gcat) at 300°C. The high performance of Au/In2O3-NS was considered as the presence of Au. It contributes to the creation of more surface oxygen vacancies, which further promoted the CO2 adsorption and facilitated CO2 activation to form the formate intermediates towards methanol. This work clearly suggests that the activity of In2O3 catalyst can be effective enhanced by structure engineering and Au decorating.

Tailoring MIL-100(Fe)-derived catalyst for controlled carbon dioxide conversion and product selectivity

Here in, we are reporting the effect of the catalyst particle size on the catalytic activity and product selectivity by understanding the strength of the interaction between the active catalyst and the reactants (CO2 and H2). In this regard, two catalytic systems having different active catalyst particle sizes and support surface areas were synthesized using metal-organic frameworks (MOF) (MIL-100(Fe)) having two crystal size ranges as sacrificial templates. The active catalyst having smaller nanoparticles exhibited greater chemisorption of hydrogen (Fe-H bond), resulting in heightened selectivity for paraffin due to hydrogenation of re-adsorbed olefins. Conversely, larger nanoparticles showed enhanced chemisorption of CO2 (Fe-C bond), leading to increased selectivity for olefins (O/P = 0.15). Additionally, a reduction in particle size boosts activity from 24% to 38.7% at 340 °C/20 bar. While, higher particle size enhances the selectivity towards C5+ from 11.1 to 45.6% at (300 °C/10 bar) and 9.6 to 21.3% at (340 °C/20 bar).

The superiority of Pd2+ in CO2 hydrogenation to formic acid

The hydrogenation of CO2 to formic acid is an essential subject since formic acid is a promising hydrogen storage material and a valuable commodity chemical. In this study, we report for the first time the hydrogenation of CO2 to formic acid catalyzed by a Pd2+ catalyst, Pd-V/AC-air. The catalyst exhibited extraordinary catalytic activity toward the hydrogenation of CO2 to formic acid. The TON and TOF are up to 4790 and 2825 h-1, respectively, representing the top level among reported heterogeneous Pd catalysts. By combining a study of first-principles density functional theory with experimental results, the superiority of Pd2+ over Pd0 was confirmed. Furthermore, the presence of V modified the electronic state of Pd2+, thus promoting the reaction. This study reports the effect of metal valence and electronic state on the catalytic performance for the first time and provides a new prospect for the design of an efficient heterogeneous catalyst for the hydrogenation of CO2 to formic acid.

Structured Catalysts and Catalytic Processes: Transport and Reaction Perspectives

The structure of catalysts determines the performance of catalytic processes. Intrinsically, the electronic and geometric structures influence the interaction between active species and the surface of the catalyst, which subsequently regulates the adsorption, reaction, and desorption behaviors. In recent decades, the development of catalysts with complex structures, including bulk, interfacial, encapsulated, and atomically dispersed structures, can potentially affect the electronic and geometric structures of catalysts and lead to further control of the transport and reaction of molecules. This review describes comprehensive understandings on the influence of electronic and geometric properties and complex catalyst structures on the performance of relevant heterogeneous catalytic processes, especially for the transport and reaction over structured catalysts for the conversions of light alkanes and small molecules. The recent research progress of the electronic and geometric properties over the active sites, specifically for theoretical descriptors developed in the recent decades, is discussed at the atomic level. The designs and properties of catalysts with specific structures are summarized. The transport phenomena and reactions over structured catalysts for the conversions of light alkanes and small molecules are analyzed. At the end of this review, we present our perspectives on the challenges for the further development of structured catalysts and heterogeneous catalytic processes.

Materials Genes of CO2 Hydrogenation on Supported Cobalt Catalysts: An Artificial Intelligence Approach Integrating Theoretical and Experimental Data

Designing materials for catalysis is challenging because the performance is governed by an intricate interplay of various multiscale phenomena, such as the chemical reactions on surfaces and the materials' restructuring during the catalytic process. In the case of supported catalysts, the role of the support material can be also crucial. Here, we address this intricacy challenge by a symbolic-regression artificial intelligence (AI) approach. We identify the key physicochemical parameters correlated with the measured performance, out of many offered candidate parameters characterizing the materials, reaction environment, and possibly relevant underlying phenomena. Importantly, these parameters are obtained by both experiments and ab initio simulations. The identified key parameters might be called "materials genes", in analogy to genes in biology: they correlate with the property or function of interest, but the explicit physical relationship is not (necessarily) known. To demonstrate the approach, we investigate the CO2 hydrogenation catalyzed by cobalt nanoparticles supported on silica. Crucially, the silica support is modified with the additive metals magnesium, calcium, titanium, aluminum, or zirconium, which results in six materials with significantly different performances. These systems mimic hydrothermal vents, which might have produced the first organic molecules on Earth. The key parameters correlated with the CH3OH selectivity reflect the reducibility of cobalt species, the adsorption strength of reaction intermediates, and the chemical nature of the additive metal. By using an AI model trained on basic elemental properties of the additive metals (e.g., ionization potential) as physicochemical parameters, new additives are suggested. The predicted CH3OH selectivity of cobalt catalysts supported on silica modified with vanadium and zinc is confirmed by new experiments.

Theoretical Insights into Amido Group-Mediated Enhancement of CO2 Hydrogenation to Methanol on Cobalt Catalysts

Catalytic reduction of carbon dioxide into high-value-added products, such as methanol, is an effective approach to mitigate the greenhouse effect, and improving Co-based catalysts is anticipated to yield potential catalysts with high performance and low cost. In this study, based on first-principles calculations, we elucidate the promotion effects of surface *NHx (x = 1, 2, and 3) on the carbon dioxide hydrogenation to methanol from both activity and selectivity perspectives on Co-based catalysts. The presence of *NHx reduced the energy barrier of each elementary step on Co(100) by regulating the electronic structure to alter the binding strength of intermediates or by forming a hydrogen bond between surface oxygen-containing species and *NHx to stabilize transition states. The best promotion effect for different steps corresponds to different *NHx. The energy barrier of the rate-determining step of CO2 hydrogenation to methanol is lowered from 1.55 to 0.88 eV, and the product selectivity shifts from methane to methanol with the assistance of *NHx on the Co(100) surface. A similar phenomenon is observed on the Co(111) surface. The promotion effect of *NHx on Co-based catalysts is superior to that of water, indicating that the introduction of *NHx on a Co-based catalyst is an effective strategy to enhance the catalytic performance of CO2 hydrogenation to methanol.

Construction of a Metal-Silica Interface for Semihydrogenation of Alkynes

Fabricating optimum surface structures represents an attractive approach for synthesizing supported catalysts with high activity and specific selectivity. New active sites could be flexibly constructed via the strong metal-support interaction under the redox condition. Herein, we demonstrated the formation of a new Rh-Si surface on a silica-modified carbon nanotube supported Rh catalyst under the high-temperature reduction condition as well as a thin amorphous silica coating layer and weak chemisorption toward the CO molecule. The electronic interactions between Rh and Si, along with the particular structure, guarantee desirable catalytic performance for the semihydrogenation of phenylacetylene under mild conditions. This facile approach might be extensively used in constructing new active sites with robust activity and specific selectivity in diverse heterogeneous catalysis systems.

Synthesis of Cobalt-Based Nanoparticles as Catalysts for Methanol Synthesis from CO2 Hydrogenation

The increasing emission of carbon dioxide into the atmosphere has urged the scientific community to investigate alternatives to alleviate such emissions, being that they are the principal contributor to the greenhouse gas effect. One major alternative is carbon capture and utilization (CCU) toward the production of value-added chemicals using diverse technologies. This work aims at the study of the catalytic potential of different cobalt-derived nanoparticles for methanol synthesis from carbon dioxide hydrogenation. Thanks to its abundance and cost efficacy, cobalt can serve as an economical catalyst compared to noble metal-based catalysts. In this work, we present a systematic comparison among different cobalt and cobalt oxide nanocomposites in terms of their efficiency as catalysts for carbon dioxide hydrogenation to methanol as well as how different supports, zeolites, MnO2, and CeO2, can enhance their catalytic capacity. The oxygen vacancies in the cerium oxide act as carbon dioxide adsorption and activation sites, which facilitates a higher methanol production yield.

A review on high-pressure heterogeneous catalytic processes for gas-phase CO2 valorization

This review discusses the importance of mitigating CO2 emissions by valorizing CO2 through high-pressure catalytic processes. It focuses on various key processes, including CO2 methanation, reverse water-gas shift, methane dry reforming, methanol, and dimethyl ether synthesis, emphasizing pros and cons of high-pressure operation. CO2 methanation, methanol synthesis, and dimethyl ether synthesis reactions are thermodynamically favored under high-pressure conditions. However, in the case of methane dry reforming and reverse water-gas shift, applying high pressure, results in decreased selectivity toward desired products and an increase in coke production, which can be detrimental to both the catalyst and the reaction system. Nevertheless, high-pressure utilization proves industrially advantageous for cost reduction when these processes are integrated with Fischer-Tropsch or methanol synthesis units. This review also compiles recent advances in heterogeneous catalysts design for high-pressure applications. By examining the impact of pressure on CO2 valorization and the state of the art, this work contributes to improving scientific understanding and optimizing these processes for sustainable CO2 management, as well as addressing challenges in high-pressure CO2 valorization that are crucial for industrial scaling-up. This includes the development of cost-effective and robust reactor materials and the development of low-cost catalysts that yield improved selectivity and long-term stability under realistic working environments.

Sheet-Like Morphology CuO/Co3O4 Nanocomposites for Enhanced Catalysis in Hydrogenation of CO2 to Methanol

The selective hydrogenation of CO2 into high-value chemicals is an effective approach to address environmental issues. Cobalt-based catalysts have significant potential in CO2 hydrogenation reaction systems; however, there is a need to control their selectivity better. In this study, copper is introduced onto Co3O4 nanosheets using the ion exchange reverse loading method. The unique interaction of these materials significantly alters the selectivity of the cobalt-based catalyst. Results from scanning transmission electron microscopy and scanning electron microscopy indicate that this catalyst enables a more even dispersion of copper species in the Co3O4 nanosheets. Temperature-programmed reduction and X-ray photoelectron spectroscopy reveal that the catalyst facilitates the metal-metal interaction between Co and Cu. Temperature-programmed desorption experiments for CO2 and H2 demonstrate that the close interaction between Co and Cu modifies CO2 adsorption, leading to differences in catalytic activity. Moreover, the catalyst effectively suppresses CO2 methanation and promotes methanol formation by altering the alkalinity of the catalyst surface and weakening the hydrogen dissociation ability.

Relative Local Electron Density Tuning in Metal-Covalent Organic Frameworks for Boosting CO2 Photoreduction

The high local electron density and efficient charge carrier separation are two important factors to affect photocatalytic activity, especially for the CO2 photoreduction reaction. However, the systematic studies on the structure-functional relationship regarding the above two factors based on precisely structure model are rarely reported. Herein, as a proof-of-concept, we developed a new strategy on the evaluation of local electron density by controlling the relative electron-deficient (ED) and electron-rich (ER) intensity of monomer at a molecular level based on three rational-designed vinylene-linked sp2 carbon-covalent organic frameworks (COFs). As expected, the as-prepared vinylene-linked sp2 carbon-conjugated metal-covalent organic framework (MCOFs) (VL-MCOF-1) with molecular junction exhibited excellent activities for CO2 -to-HCOOH conversion (283.41 μmol g-1  h-1 ) and high selectivity of 97.1 %, much higher than the VL-MCOF-2 and g-C34 N6 -COF, which is due to the synergistic effect of the multi-electronic metal clusters (Cu3 (PyCA)3 ) (PyCA=pyrazolate-4-carboxaldehyde) as strong ER roles and cyanopyridine units as ED roles and active sites, as well as the boosted photo-induced charge separation efficiency of vinyl connection and increased light utilization ability. These results not only provide a strategy for regulating the electron-density distribution of photocatalysts at the molecular level but also offers profound insights for metal clusters-based COFs to effective CO2 conversion.

Enhancing CO2 reduction through the catalytic effect of a novel silicon haeckelite-inspired 2D material

We propose a novel 2D material based on silicon haeckelite (Hck), whose structure contains a silicon atom arranged in a periodic pattern of pentagons and heptagons. Stacking the two layers gives rise to a planar geometry of the layers that compose it. This new structure presents a semiconductor character with a band gap of 0.17 eV. Furthermore, we studied CO2 reduction using molecular hydrogen to form formic acid, carbon monoxide, formaldehyde, methanol, and methane. All these have been studied theoretically at the Grimme D3BJ corrected TPSS/def2-SVP level. A massive biflake containing 132 Si atoms was used to model the Hck surface. According to the results, CO2 capture with Hck is a spontaneous step; in contrast, the same process for silicene mono- and bi-flakes studied previously was endergonic. After the capture of CO2, the addition of H2 to the substrate passes through an intermediate containing a Si-H bond. The formation of Si-H intermediates is the origin of the catalytic effect, facilitating H2 dissociation and acting as the hydrogen atom donor for the substrate. These intermediates are transformed by adding hydrogen atoms and losing water molecules, producing formic acid and formaldehyde as the most probable products, with rate-controlling steps of 29.2 and 27 kcal mol-1, whose values were less than those exhibited by the silicene biflake. This means that the silicon haeckelite biflake presents better catalytic activity than the silicene biflake. The results show that the novel 2D silicon hackelite material has remarkable potential for CO2 capture and reduction. The theoretical analysis of this innovative 2D structure provides valuable insights into the potential applications of silicene-based materials.

Zeolite-encaged mononuclear copper centers catalyze CO2 selective hydrogenation to methanol

The selective hydrogenation of CO2 to methanol by renewable hydrogen source represents an attractive route for CO2 recycling and is carbon neutral. Stable catalysts with high activity and methanol selectivity are being vigorously pursued, and current debates on the active site and reaction pathway need to be clarified. Here, we report a design of faujasite-encaged mononuclear Cu centers, namely Cu@FAU, for this challenging reaction. Stable methanol space-time-yield (STY) of 12.8 mmol gcat-1 h-1 and methanol selectivity of 89.5% are simultaneously achieved at a relatively low reaction temperature of 513 K, making Cu@FAU a potential methanol synthesis catalyst from CO2 hydrogenation. With zeolite-encaged mononuclear Cu centers as the destined active sites, the unique reaction pathway of stepwise CO2 hydrogenation over Cu@FAU is illustrated. This work provides a clear example of catalytic reaction with explicit structure-activity relationship and highlights the power of zeolite catalysis in complex chemical transformations.

Review on supported metal catalysts with partial/porous overlayers for stabilization

Heterogeneous catalysts of supported metals are important for both liquid-phase and gas-phase chemical transformations which underpin the petrochemical sector and manufacture of bulk or fine chemicals and pharmaceuticals. Conventional supported metal catalysts (SMC) suffer from deactivation resulting from sintering, leaching, coking and so on. Besides the choice of active species (e.g. atoms, clusters, nanoparticles) to maximize catalytic performances, strategies to stabilize active species are imperative for rational design of catalysts, particularly for those catalysts that work under heated and corrosive reaction conditions. The complete encapsulation of metal active species within a matrix (e.g. zeolites, MOFs, carbon, etc.) or core-shell arrangements is popular. However, the use of partial/porous overlayers (PO) to preserve metals, which simultaneously ensures the accessibility of active sites through controlling the size/shape of diffusing reactants and products, has not been systematically reviewed. The present review identifies the key design principles for fabricating supported metal catalysts with partial/porous overlayers (SMCPO) and demonstrates their advantages versus conventional supported metals in catalytic reactions.

Epitaxially grown silicon-based single-atom catalyst for visible-light-driven syngas production

Improving the dispersion of active sites simultaneous with the efficient harvest of photons is a key priority for photocatalysis. Crystalline silicon is abundant on Earth and has a suitable bandgap. However, silicon-based photocatalysts combined with metal elements has proved challenging due to silicon's rigid crystal structure and high formation energy. Here we report a solid-state chemistry that produces crystalline silicon with well-dispersed Co atoms. Isolated Co sites in silicon are obtained through the in-situ formation of CoSi₂ intermediate nanodomains that function as seeds, leading to the production of Co-incorporating silicon nanocrystals at the CoSi₂/Si epitaxial interface. As a result, cobalt-on-silicon single-atom catalysts achieve an external quantum efficiency of 10% for CO₂-to-syngas conversion, with CO and H₂ yields of 4.7 mol g_(Co)^-1 and 4.4 mol g_(Co)^-1, respectively. Moreover, the H₂/CO ratio is tunable between 0.8 and 2. This photocatalyst also achieves a corresponding turnover number of 2 × 10⁴ for visible-light-driven CO₂ reduction over 6 h, which is over ten times higher than previously reported single-atom photocatalysts.

Cr-Zn/Ni-Containing Nanocomposites as Effective Magnetically Recoverable Catalysts for CO2 Hydrogenation to Methanol: The Role of Metal Doping and Polymer Co-Support

CO2 hydrogenation to methanol is an important process that could solve the problem of emitted CO2 that contributes to environmental concern. Here we developed Cr-, Cr-Zn-, and Cr-Ni-containing nanocomposites based on a solid support (SiO2 or Al2O3) with embedded magnetic nanoparticles (NPs) and covered by a cross-linked pyridylphenylene polymer layer. The decomposition of Cr, Zn, and Ni precursors in the presence of supports containing magnetic oxide led to formation of amorphous metal oxides evenly distributed over the support-polymer space, together with the partial diffusion of metal species into magnetic NPs. We demonstrated the catalytic activity of Cr2O3 in the hydrogenation reaction of CO2 to methanol, which was further increased by 50% and 204% by incorporation of Ni and Zn species, respectively. The fine intermixing of metal species ensures an enhanced methanol productivity. Careful adjustment of constituent elements, e.g., catalytic metal, type of support, presence of magnetic NPs, and deposition of hydrophobic polymer layer contributes to the synergetic promotional effect required for activation of CO2 molecules as well. The results of catalytic recycle experiments revealed excellent stability of the catalysts due to protective role of hydrophobic polymer.

A Review on Green Hydrogen Valorization by Heterogeneous Catalytic Hydrogenation of Captured CO2 into Value-Added Products

The catalytic hydrogenation of captured CO2 by different industrial processes allows obtaining liquid biofuels and some chemical products that not only present the interest of being obtained from a very low-cost raw material (CO2) that indeed constitutes an environmental pollution problem but also constitute an energy vector, which can facilitate the storage and transport of very diverse renewable energies. Thus, the combined use of green H2 and captured CO2 to obtain chemical products and biofuels has become attractive for different processes such as power-to-liquids (P2L) and power-to-gas (P2G), which use any renewable power to convert carbon dioxide and water into value-added, synthetic renewable E-fuels and renewable platform molecules, also contributing in an important way to CO2 mitigation. In this regard, there has been an extraordinary increase in the study of supported metal catalysts capable of converting CO2 into synthetic natural gas, according to the Sabatier reaction, or in dimethyl ether, as in power-to-gas processes, as well as in liquid hydrocarbons by the Fischer-Tropsch process, and especially in producing methanol by P2L processes. As a result, the current review aims to provide an overall picture of the most recent research, focusing on the last five years, when research in this field has increased dramatically.

Plasma Functionalization of Silica Bilayer Polymorphs

Ultrathin silica films are considered suitable two-dimensional model systems for the study of fundamental chemical and physical properties of all-silica zeolites and their derivatives, as well as novel supports for the stabilization of single atoms. In the present work, we report the creation of a new model catalytic support based on the surface functionalization of different silica bilayer (BL) polymorphs with well-defined atomic structures. The functionalization is carried out by means of in situ H-plasma treatments at room temperature. Low energy electron diffraction and microscopy data indicate that the atomic structure of the films remains unchanged upon treatment. Comparing the experimental results (photoemission and infrared absorption spectra) with density functional theory simulations shows that H₂ is added via the heterolytic dissociation of an interlayer Si-O-Si siloxane bond and the subsequent formation of a hydroxyl and a hydride group in the top and bottom layers of the silica film, respectively. Functionalization of the silica films constitutes the first step into the development of a new type of model system of single-atom catalysts where metal atoms with different affinities for the functional groups can be anchored in the SiO₂ matrix in well-established positions. In this way, synergistic and confinement effects between the active centers can be studied in a controlled manner.

Atomic-Scale Structure Dynamics of Nanocrystals Revealed By In Situ and Environmental Transmission Electron Microscopy

Nanocrystals are of great importance in material sciences and industry. Engineering nanocrystals with desired structures and properties is no doubt one of the most important challenges in the field, which requires deep insight into atomic-scale dynamics of nanocrystals during the process. The rapid developments of in situ transmission electron microscopy (TEM), especially environmental TEM, reveal insights into nanocrystals to digest. According to the considerable progress based on in situ electron microscopy, a comprehensive review on nanocrystal dynamics from three aspects: nucleation and growth, structure evolution, and dynamics in reaction conditions are given. In the nucleation and growth part, existing nucleation theories and growth pathways are organized based on liquid and gas-solid phases. In the structure evolution part, the focus is on in-depth mechanistic understanding of the evolution, including defects, phase, and disorder/order transitions. In the part of dynamics in reaction conditions, solid-solid and gas-solid interfaces of nanocrystals in atmosphere are discussed and the structure-property relationship is correlated. Even though impressive progress is made, additional efforts are required to develop the integrated and operando TEM methodologies for unveiling nanocrystal dynamics with high spatial, energy, and temporal resolutions.

A practical concept for catalytic carbonylations using carbon dioxide

The rise of CO₂ in atmosphere is considered as the major reason for global warming. Therefore, CO₂ utilization has attracted more and more attention. Among those, using CO₂ as C1-feedstock for the chemical industry provides a solution. Here we show a two-step cascade process to perform catalytic carbonylations of olefins, alkynes, and aryl halides utilizing CO₂ and H₂. For the first step, a novel heterogeneous copper 10Cu@SiO₂-PHM catalyst exhibits high selectivity (≥98%) and decent conversion (27%) in generating CO from reducing CO₂ with H₂. The generated CO is directly utilized without further purification in industrially important carbonylation reactions: hydroformylation, alkoxycarbonylation, and aminocarbonylation. Notably, various aldehydes, (unsaturated) esters and amides are obtained in high yields and chemo-/regio-selectivities at low temperature under ambient pressure. Our approach is of interest for continuous syntheses in drug discovery and organic synthesis to produce building blocks on reasonable scale utilizing CO₂.

A viologen-functionalized metal-organic framework for efficient CO2 photoreduction reaction

Here, a viologen-functionalized metal-organic framework (MOF), MIL-125-RV2+, was obtained by modification of MIL-125-NH2 with viologen molecules. MIL-125-RV2+, the first viologen-based MOF for photocatalytic CO₂RR, exhibited excellent photocatalytic activity and high selectivity for HCOO^-. The strategy of using photo-responsive color-changing organics to functionalize the MOF is significant for achieving efficient CO₂RR.

Uncovering the reaction mechanism behind CoO as active phase for CO2 hydrogenation

Transforming carbon dioxide into valuable chemicals and fuels, is a promising tool for environmental and industrial purposes. Here, we present catalysts comprising of cobalt (oxide) nanoparticles stabilized on various support oxides for hydrocarbon production from carbon dioxide. We demonstrate that the activity and selectivity can be tuned by selection of the support oxide and cobalt oxidation state. Modulated excitation (ME) diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) reveals that cobalt oxide catalysts follows the hydrogen-assisted pathway, whereas metallic cobalt catalysts mainly follows the direct dissociation pathway. Contrary to the commonly considered metallic active phase of cobalt-based catalysts, cobalt oxide on titania support is the most active catalyst in this study and produces 11% C2+ hydrocarbons. The C2+ selectivity increases to 39% (yielding 104 mmol h-1 gcat-1 C2+ hydrocarbons) upon co-feeding CO and CO2 at a ratio of 1:2 at 250 °C and 20 bar, thus outperforming the majority of typical cobalt-based catalysts.

Tuning product selectivity in CO2 hydrogenation over metal-based catalysts

Conversion of CO2 into chemicals is a promising strategy for CO2 utilization, but its intricate transformation pathways and insufficient product selectivity still pose challenges. Exploiting new catalysts for tuning product selectivity in CO2 hydrogenation is important to improve the viability of this technology, where reverse water-gas shift (RWGS) and methanation as competitive reactions play key roles in controlling product selectivity in CO2 hydrogenation. So far, a series of metal-based catalysts with adjustable strong metal-support interactions, metal surface structure, and local environment of active sites have been developed, significantly tuning the product selectivity in CO2 hydrogenation. Herein, we describe the recent advances in the fundamental understanding of the two reactions in CO2 hydrogenation, in terms of emerging new catalysts which regulate the catalytic structure and switch reaction pathways, where the strong metal-support interactions, metal surface structure, and local environment of the active sites are particularly discussed. They are expected to enable efficient catalyst design for minimizing the deep hydrogenation and controlling the reaction towards the RWGS reaction. Finally, the potential utilization of these strategies for improving the performance of industrial catalysts is examined.

Capillary-Bound Dense Micelle Brush Supports for Continuous Flow Catalysis

Flow reactors are appealing alternatives to conventional batch reactors for heterogeneous catalysis. However, it remains a key challenge to firmly immobilize the catalysts in a facile and flexible manner and to simultaneously maintain a high catalytic efficiency and throughput. Herein, we introduce a dense cylindrical micelle brush support in glass capillary flow reactors through a living crystallization-driven self-assembly process initiated by pre-immobilized short micelle seeds. The active hairy corona of these micellar brushes allows the flexible decoration of a diverse array of nanocatalysts, either through a direct capture process or an in situ growth method. The resulting flow reactors reveal excellent catalytic efficiency for a broad range of frequently utilized transformations, including organic reductions, Suzuki couplings, photolytic degradations, and multistep cascade reactions, and the system was both recyclable and durable. Significantly, this approach is readily applicable to long capillaries, which enables the construction of flow reactors with remarkably higher throughput.

Cobalt Catalysts Enable Selective Hydrogenation of CO2 toward Diverse Products: Recent Progress and Perspective

Selective hydrogenation of carbon dioxide (CO₂) into value-added chemicals has aroused great interest. The chemical inertness of CO₂ and diverse reaction pathways usually require the construction of enabled catalysts. To date, cobalt (Co) catalysts characteristic of metallic and/or divalent Co components show great potential for CO₂ hydrogenation. To better regulate the CO₂ hydrogenation, it is necessary to summarize the current progress of cobalt catalysts for selective hydrogenation of CO₂. In this Perspective, first, hydrogenation of CO₂ into methane over metallic Co sites is introduced. Second, hydrogenation of CO₂ into methanol and C₂₊ alcohols is discussed by constructing mixed-valent cobalt sites. Third, hydrogenation of CO₂ into light olefins and C₅₊ liquid fuels over cobalt-containing hybrid catalysts is introduced. Fourth, the reaction paths for selective hydrogenation of CO₂ over cobalt catalysts are illustrated. Finally, the current challenges and prospects of cobalt-based nanocatalysts for hydrogenation of CO₂ are proposed.

Mechanistic and multiscale aspects of thermo-catalytic CO2 conversion to C1 products

The increasing environmental concerns due to anthropogenic CO2 emissions have called for an alternate sustainable source to fulfill rising chemical and energy demands and reduce environmental problems. The thermo-catalytic activation and conversion of abundantly available CO2, a thermodynamically stable and kinetically inert molecule, can significantly pave the way to sustainably produce chemicals and fuels and mitigate the additional CO2 load. This can be done through comprehensive knowledge and understanding of catalyst behavior, reaction kinetics, and reactor design. This review aims to catalog and summarize the advances in the experimental and theoretical approaches for CO2 activation and conversion to C1 products via heterogeneous catalytic routes. To this aim, we analyze the current literature works describing experimental analyses (e.g., catalyst characterization and kinetics measurement) as well as computational studies (e.g., microkinetic modeling and first-principles calculations). The catalytic reactions of CO2 activation and conversion reviewed in detail are: (i) reverse water-gas shift (RWGS), (ii) CO2 methanation, (iii) CO2 hydrogenation to methanol, and (iv) dry reforming of methane (DRM). This review is divided into six sections. The first section provides an overview of the energy and environmental problems of our society, in which promising strategies and possible pathways to utilize anthropogenic CO2 are highlighted. In the second section, the discussion follows with the description of materials and mechanisms of the available thermo-catalytic processes for CO2 utilization. In the third section, the process of catalyst deactivation by coking is presented, and possible solutions to the problem are recommended based on experimental and theoretical literature works. In the fourth section, kinetic models are reviewed. In the fifth section, reaction technologies associated with the conversion of CO2 are described, and, finally, in the sixth section, concluding remarks and future directions are provided.

Atomic origins of the strong metal-support interaction in silica supported catalysts

Silica supported metal catalysts are most widely used in the modern chemical industry because of the high stability and tunable reactivity. The strong metal–support interaction (SMSI), which has been widely observed in metal oxide supported catalysts and significantly affects the catalytic behavior, has been speculated to rarely happen in silica supported catalysts since silica is hard to reduce. Here we revealed at the atomic scale the interfacial reaction induced SMSI in silica supported Co and Pt catalysts under reductive conditions at high temperature using aberration-corrected environmental transmission electron microscopy coupled with in situ electron energy loss spectroscopy. In a Co/SiO₂ system, the amorphous SiO₂ migrated onto the Co surface to form a crystallized quartz-SiO₂ overlayer, and simultaneously an interlayer of Si was generated in-between. The metastable crystalline SiO₂ overlayer subsequently underwent an order-to-disorder transition due to the continuous dissociation of SiO₂ and the interfacial alloying of Si with the underlying Co. The SMSI in the Pt–SiO₂ system was found to remarkably boost the catalytic hydrogenation. These findings demonstrate the universality of the SMSI in oxide supported catalysts, which is of general importance for designing catalysts and understanding catalytic mechanisms.

This work tracked at the atomic scale the interfacial reaction induced strong metal–support interaction between SiO₂ and metal catalysts and evolution under reactive conditions by aberration-corrected environmental transmission electron microscopy.

Towards the development of the emerging process of CO2 heterogenous hydrogenation into high-value unsaturated heavy hydrocarbons

The emerging process of CO₂ hydrogenation through heterogenous catalysis into important bulk chemicals provides an alternative strategy for sustainable and low-cost production of valuable chemicals, and brings an important chance for mitigating CO₂ emissions. Direct synthesis of the family of unsaturated heavy hydrocarbons such as α-olefins and aromatics via CO₂ hydrogenation is more attractive and challenging than the production of short-chain products to modern society, suffering from the difficult control between C-O activation and C-C coupling towards long-chain hydrocarbons. In the past several years, rapid progress has been achieved in the development of efficient catalysts for the process and understanding of their catalytic mechanisms. In this review, we provide a comprehensive, authoritative and critical overview of the substantial progress in the synthesis of α-olefins and aromatics from CO₂ hydrogenation via direct and indirect routes. The rational fabrication and design of catalysts, proximity effects of multi-active sites, stability and deactivation of catalysts, reaction mechanisms and reactor design are systematically discussed. Finally, current challenges and potential applications in the development of advanced catalysts, as well as opportunities of next-generation CO₂ hydrogenation techniques for carbon neutrality in future are proposed.

Oxygen-deficient metal oxides supported nano-intermetallic InNi3C0.5 toward efficient CO2 hydrogenation to methanol

Direct CO₂ hydrogenation to methanol using renewable energy-generated hydrogen is attracting intensive attention, but qualifying catalysts represents a grand challenge. Pure-/multi-metallic systems used for this task usually have low catalytic activity. Here, we tailored a highly active and selective InNi₃C_0.5/ZrO₂ catalyst by tuning the performance-relevant electronic metal-support interaction (EMSI), which is tightly linked with the ZrO₂ type-dependent oxygen deficiency. Highly oxygen-deficient monoclinic-ZrO₂ support imparts high electron density to InNi₃C_0.5 because of the considerably enhanced EMSI, thereby enabling InNi₃C_0.5/monoclinic-ZrO₂ with an intrinsic activity three or two times as high as that of InNi₃C_0.5/amorphous-ZrO₂ or InNi₃C_0.5/tetragonal-ZrO₂ The EMSI-governed catalysis observed in the InNi₃C_0.5/ZrO₂ system is extendable to other oxygen-deficient metal oxides, in particular InNi₃C_0.5/Fe₃O₄, achieving 25.7% CO₂ conversion with 90.2% methanol selectivity at 325°C, 6.0 MPa, 36,000 ml g_cat ^-1 hour^-1, and H₂/CO₂ = 10:1. This affordable catalyst is stable for at least 500 hours and is also highly resistant to sulfur poisoning.

Integrated catalytic insights into methanol production: Sustainable framework for CO2 conversion

A continuous increase in the amount of greenhouse gases (GHGs) is causing serious threats to the environment and life on the earth, and CO₂ is one of the major candidates. Reducing the excess CO₂ by converting into industrial products could be beneficial for the environment and also boost up industrial growth. In particular, the conversion of CO₂ into methanol is very beneficial as it is cheaper to produce from biomass, less inflammable, and advantageous to many industries. Application of various plants, algae, and microbial enzymes to recycle the CO₂ and using these enzymes separately along with CO₂-phillic materials and chemicals can be a sustainable solution to reduce the global carbon footprint. Materials such as MOFs, porphyrins, and nanomaterials are also used widely for CO₂ absorption and conversion into methanol. Thus, a combination of enzymes and materials which convert the CO₂ into methanol could energize the CO₂ utilization. The CO₂ to methanol conversion utilizes carbon better than the conventional syngas and the reaction yields fewer by-products. The methanol produced can further be utilized as a clean-burning fuel, in pharmaceuticals, automobiles and as a general solvent in various industries etc. This makes methanol an ideal fuel in comparison to the conventional petroleum-based ones and it is advantageous for a safer and cleaner environment. In this review article, various aspects of the circular economy with the present scenario of environmental crisis will also be considered for large-scale sustainable biorefinery of methanol production from atmospheric CO₂.

Zeolite-Encapsulated Ultrasmall Cu/ZnOx Nanoparticles for the Hydrogenation of CO2 to Methanol

Selective hydrogenation of CO₂ to methanol is a "two birds, one stone" technology to mitigate the greenhouse effect and solve the energy demand-supply deficit. Cu-based catalysts can effectively catalyze this reaction but suffer from low catalytic stability caused by the sintering of Cu species. Here, we report a series of zeolite-fixed catalysts Cu/ZnO_x(Y)@Na-ZSM-5 (Y is the mass ratios of Cu/Zn in the catalysts) with core-shell structures to overcome this issue and strengthen the transformation. Fascinatingly, in this work, we first employed bimetallic metal-organic framework, CuZn-HKUST-1, nanoparticles (NPs) as a sacrificial agent to introduce ultrasmall Cu/ZnO_x NPs (∼2 nm) into the crystalline particles of the Na-ZSM-5 zeolite via a hydrothermal synthesis method. The catalytic results showed that the optimized zeolite-encapsulated Cu/ZnO_x(1.38)@Na-ZSM-5 catalyst exhibited the space time yield of methanol (STY_MeOH) of 44.88 g_MeOH·g_Cu^-1·h^-1, much more efficient than the supported Cu/ZnO_x/Na-ZSM-5 catalyst (13.32 g_MeOH·g_Cu^-1·h^-1) and industrial Cu/ZnO/Al₂O₃ catalyst (8.46 g_MeOH·g_Cu^-1·h^-1) under identical conditions. Multiple studies demonstrated that the confinement in the zeolite formwork affords an intimate surrounding for the active phase to create synergies and avoid the separation of Cu-ZnO_x interfaces, which results in an improved performance. More importantly, in the long-term test, the Cu/ZnO_x(1.38)@Na-ZSM-5 catalyst exhibited constant STY_MeOH with superior durability benefitted from its fixed structure. The current findings demonstrate the importance of confinement effects in designing highly efficient and stable methanol synthesis catalysts.

Optimizing Active Sites for High CO Selectivity during CO2 Hydrogenation over Supported Nickel Catalysts

Controlling the selectivity of CO₂ hydrogenation catalysts is a fundamental challenge. In this study, the selectivity of supported Ni catalysts prepared by the traditional impregnation method was found to change after a first CO₂ hydrogenation reaction cycle from 100 to 800 °C. The usually high CH₄ formation was suppressed leading to full selectivity toward CO. This behavior was also observed after the catalyst was treated under methane or propane atmospheres at elevated temperatures. In situ spectroscopic studies revealed that the accumulation of carbon species on the catalyst surface at high temperatures leads to a nickel carbide-like phase. The catalyst regains its high selectivity to CH₄ production after carbon depletion from the surface of the Ni particles by oxidation. However, the selectivity readily shifts back toward CO formation after exposing the catalysts to a new temperature-programmed CO₂ hydrogenation cycle. The fraction of weakly adsorbed CO species increases on the carbide-like surface when compared to a clean nickel surface, explaining the higher selectivity to CO. This easy protocol of changing the surface of a common Ni catalyst to gain selectivity represents an important step for the commercial use of CO₂ hydrogenation to CO processes toward high-added-value products.

Engineering of Yolk/Core-Shell Structured Nanoreactors for Thermal Hydrogenations

Heterogeneous hydrogenation reactions are of great importance for chemical upgrading and synthesis, but still face the challenges of controlling selectivity and long-term stability. To improve the catalytic performance, many hydrogenation reactions utilize special yolk/core-shell nanoreactors (YCSNs) with unique architectures and advantageous properties. This work presents the developmental and technological challenges in the preparation of YCSNs that are potentially useful for hydrogenation reactions, and provides a summary of the properties of these materials. The work also addresses the scientific challenges in applications of these YCSNs in various gas and liquid-phase hydrogenation reactions. The catalyst structures, catalytic performance, structure-performance relationships, reaction mechanisms, and unsolved problems are discussed too. Also, a brief outlook and opportunities for future research in this field are presented. This work on the advancements in YCSNs might inspire the creation of new materials with desired structures for achieving maximal hydrogenation performances.