Smoothing the energy transfer pathway in quasi-2D perovskite films using methanesulfonate leads to highly efficient light-emitting devices

Enhanced Interfacial Exciton Transport in Mixed 2D/3D Perovskites Approaching Bulk 3D Counterparts

Mixed 2D/3D halide perovskites possess unique optoelectronic properties and strong structural stability, making them promising for various light-harvesting and -emitting applications. However, the long-chain organic cations have low charge conductivity and create potential barriers within the inorganic frameworks, which limit efficient exciton and carrier transport. In this study, we propose a method to improve exciton transport in 2D/3D perovskites by adjusting the conjugation interactions of long-chain ligands. Through time-resolved spectroscopy and high-resolution transmission electron microscopy, we establish the relationship between the microstructure of 2D/3D perovskites and exciton mobility. We successfully create a 2D/3D halide perovskite film with an exciton transport value of 92 cm2 V-1 s-1, approaching its 3D bulk counterparts. We explain that the strong interligand conjugation of the naphthylmethylammonium cation aids in forming a 2D phase with a small value, which compresses the 2D domains to the nanometer scale, thereby enhancing carrier tunneling and exciton mobility across the 3D grain boundaries. These findings offer helpful perspectives for the development of high-mobility mixed 2D/3D perovskite films for applications in solar cells, light-emitting diodes, and photodetectors.

Quantum-Sized Sb@Au Schottky Heterostructure for Sensitized Radioimmunotherapy

Radiodynamic therapy (RDT) holds great potential for overcoming radioresistance and enhancing tumor immunogenicity. However, its efficacy is hindered by limited reactive oxygen species (ROS) generation due to insufficient carrier generation and transfer, which often results in tumor metastasis. Here, we report quantum-sized and narrow-bandgap Sb@Au Schottky heterostructures, namely, Sb@Au nanodots (Sb@Au NDs), to improve ROS generation for sensitizing RDT and inhibiting tumor metastasis. Experimental results and density functional theory calculations show that Sb@Au NDs give narrow bandgap and high Schottky potential barrier for promoting carrier generation and separation under X-ray irradiation, and present rich active sites for improving catalytic performance, leading to abundant ROS generation and significantly amplifying intracellular oxidative stress to enhance RDT. Sb@Au ND-sensitized RDT greatly induces immunogenic cell death and thus promotes CD8+ T cell-mediated systemic immunity, ultimately suppressing tumor metastasis. Our finding highlights the potential of narrow-bandgap Sb@Au NDs as an effective sensitizer for radioimmunotherapy.

Efficient Rec. 2020 Compliant Pure-Green Mixed-Cation Perovskite Light-Emitting Diodes With Multifunctional Co-Additives

Perovskite light-emitting diodes (PeLEDs) compliant with Rec. 2020 standards have raised increasing attention for next-generation displays. As a class of pure-green emitters, the mixed-cation FAxCs1-xPbBr3 perovskites exhibit compatible band emission, but suffer from inferior luminescence performance. The approach to tackling this issue is hindered by a lack of in-depth understanding of their crystallization manipulating mechanism. This work unveils the crystallization process of mixed-cation FA0.7Cs0.45GA0.1PbBr3 perovskites, demonstrating the fast spontaneous growth readily induces severe crystal defects accompanied by poor charge confinement. This motivates us to introduce additional kinetic barriers to manipulate the perovskite crystallization via the synergistic co-additives of 3-((2-(methacryloyloxy)ethyldimethyl)ammonio)-propane-1-sulfonate (DMAPS) and 1,4,7,10,13,16-hexaoxacyclooctadecane (crown). The multifunctional groups in the co-additives afford robust chemical affinities with the diverse organic and inorganic precursor ions simultaneously, which enable decent nanograin growth with effective crystal defect healing and charge confinement. Ultimately, mixed-cation FA0.7Cs0.45GA0.1PbBr3 perovskites with a high photoluminescence quantum yield of 96% are achieved. The resultant pure-green PeLEDs with the Rec. 2020 compliance exhibit a champion external quantum efficiency (EQE) of 31.89%, average EQE of 29.5%, maximum luminance of 2 × 105 cd m-2 and operational half-lifetime of 3.2 h at an initial luminance of 7000 cd m-2 (extrapolated: ≈3500 h at 100 cd m-2).

Synergistic Passivation via Amino Acid Derivative for Highly Efficient Quasi-2D Perovskite Green Light-Emitting Diode

Quasi two-dimensional (2D) perovskite light-emitting diodes (PeLEDs) have emerged as promising candidates for next-generation displays and solid-state lighting. However, defects in the perovskite films often hinder the device performance of quasi-2D PeLEDs, leading to nonradiative recombination and efficiency losses. Herein, we introduce a novel synergistic passivation strategy using an amino acid derivative of Boc-N3-Cbz-L-2,3-diaminopropionic acid (BNCDA), with multiple C═O and N-H functional groups to passivate defects and suppress ion migration in perovskite films. By incorporating the passivation agent into the precursor solution, we significantly reduced the defect density and enhanced radiative recombination. As a result, the optimized PeLEDs demonstrate a remarkable external quantum efficiency (EQE) of 22.6% and a maximum luminance of 57951 cd m-2 for 511 nm emission. Simultaneously, the optimal devices display superior spectral stability and an enhanced operation lifetime in ambient air. This work highlights the importance of the synergistic effect in effectively passivating defects in quasi-2D PeLEDs and provides an interesting way to select passivating molecules for fabricating high-performance PeLEDs for future display and lighting applications.

Ultrabright Blue Lead-Halide Perovskite Light-Emitting Diodes Based on Phosphonic Acid Functionalized Hole Injection Layer

Lead-halide perovskite light-emitting diodes (PeLEDs) are intrinsically capable of delivering high efficiency at high current densities compared to conventional solution-processed light-emitting diodes. While such performance and relevant high radiance have been well demonstrated in green and near-infrared ones, blue PeLEDs have lagged far behind due to extremely severe luminance-efficiency roll-off, especially in the pure-blue region (<480 nm, a CIEy coordinate below 0.15). Here, by tackling the critical limitations of phosphonic acid functional carbazoles (PACs) as hole injection layers and simultaneously leveraging their advantages on hole injection, we achieved ultrabright pure blue PeLEDs with minimized efficiency roll-off at high brightness with a CIEy coordinate below 0.15. We show that devices based on prevailing small-molecule PACs generally exhibit significant leakage currents. This is due to a synergistic effect of uneven surface coverage from reverse micelle formation and the nanoisland structure of thin-film lead-halide perovskite emitters. By using polymeric PACs instead, we demonstrate bright blue PeLEDs showing a peak luminance of ∼29 800 cd m-2 (478 nm, at a CIEy coordinate below 0.15). We also achieve a high brightness reaching ∼140 000 cd m-2 under pulsed driven. Our study not only provides a useful guidance for developing bright blue PeLEDs but also resolves a long-standing puzzle regarding the interfacial properties of PACs and their impact on hole transport, and it helps with the further design of these materials for lead-halide perovskite applications.

Promoting Phase Transition in Quasi-2D Perovskites For High-Performance Pure-Red LEDs

Layered quasi-two-dimensional (quasi-2D) halide perovskites have emerged as a promising platform for high-efficiency electroluminescence. Narrowing the multi-quantum well distribution and eliminating wide-bandgap 2D phases are crucial for achieving a flat energy landscape, minimizing energy loss, and ensuring high-color-purity emission. Here, it is demonstrated that solution-processed quasi-2D perovskite films with broad component distributions arise from an incomplete kinetic transition from low-n (n, quantum well thickness) to high-n phases. To address this, an acetate anion treatment strategy is proposed, which induces competitive coordination between the acetate anion, the bulky spacer cation, and the inorganic layer, thereby facilitating the insertion of octahedral precursor ions and promoting phase transition. This treatment results in quasi-2D films with enhanced color purity, efficient energy transfer, and high photoluminescence quantum yield. The fabricated perovskite light emitting diode (PeLED) exhibits an emission peak at 641 nm and a peak external quantum efficiency (EQE) of 25.3%, representing one of the most efficient pure-red PeLEDs. The strategy also showcases the versatility of quasi-2D films for different emission wavelengths.

Surfactant-induced hole concentration enhancement for highly efficient perovskite light-emitting diodes

It is widely acknowledged that constructing small injection barriers for balanced electron and hole injections is essential for light-emitting diodes (LEDs). However, in highly efficient LEDs based on metal halide perovskites, a seemingly large hole injection barrier is usually observed. Here we rationalize this high efficiency through a surfactant-induced effect where the hole concentration at the perovskite surface is enhanced to enable sufficient bimolecular recombination pathways with injected electrons. This effect originates from the additive engineering and is verified by a series of optical and electrical measurements. In addition, surfactant additives that induce an increased hole concentration also significantly improve the luminescence yield, an important parameter for the efficient operation of perovskite LEDs. Our results not only provide rational design rules to fabricate high-efficiency perovskite LEDs but also present new insights to benefit the design of other perovskite optoelectronic devices.

Spacer Cation Engineering Enables Blue Quasi-2D Perovskites to Achieve Highly Efficient and Spectrally Stable Electroluminescence

The combination of organic spacer cations and mixed-halides to produce multiphase quasi-2D perovskites is a promising strategy for fabricating blue perovskite light-emitting diodes (PeLEDs). However, insufficient energy transfer, trap-assisted recombination and exciton-phonon coupling lead to significant non-radiative losses. Here, a co-spacer engineering strategy of binding guanidinium (GA+) and ortho-fluorophenylethylamium (oF-PEA+) through hydrogen bonds is proposed to prepare blue mixed-halide quasi-2D perovskite films with high photoluminescence quantum yields (PLQYs). GA+ with Lewis base characteristics reduces the trap states by defect passivation. Additionally, oF-PEA+ inhibits the rapid diffusion of GA+ by hydrogen bonding interactions, which mitigates the formation of undesirable low-dimensional phases and facilitates the growth of high-dimensional emissive phases with a more concentrated distribution, resulting in efficient energy transfer of excitons and weaker exciton-phonon coupling. These synergistic effects enable the blue perovskite films to achieve a PLQY as high as 91.5%. As a result, the fabricated blue PeLEDs show a remarkable external quantum efficiency of 21.1% at the stable emissionpeak of 489 nm with a narrow full width at half-maximum of 19 nm.

Ultrasmall Bi@Au Schottky Heterojunction with a High Potential Barrier for Amplifying Radioimmunotherapy

Radiotherapy (RT) often has poor clinical sensitivity and tumor metastasis inhibition due to weak X-ray absorption, low energy deposition, inefficient reactive oxygen species (ROS) generation, and induction of antitumor immune response. Here, we report an ultrasmall Bi@Au Schottky heterojunction, namely, Bi@Au nanodots (Bi@Au NDs), to enhance the sensitivity of RT and activate systemic immunity for effective tumor treatment and metastasis inhibition. Bi@Au NDs exhibit a high efficiency of ROS generation and glutathione (GSH) depletion. Density functional theory calculations reveal that Bi@Au NDs with a high Schottky potential barrier can efficiently facilitate carrier separation and prevent carrier backflow, which results in abundant electrons for catalytically decomposing H2O2 to •OH under X-ray irradiation. Experimental results in vitro and in vivo show that Bi@Au NDs can significantly sensitize RT by enhancing ROS generation and GSH depletion. Bi@Au ND-sensitized RT greatly induces immunogenic cell death and thus promotes a CD8+ T cell-mediated systemic immune response, ultimately inhibiting tumor metastasis. Bi@Au NDs as a kind of Schottky heterojunctions can be an effective amplifier for radioimmunotherapy.

Multivalent-effect immobilization of reduced-dimensional perovskites for efficient and spectrally stable deep-blue light-emitting diodes

Despite substantial advances in green and red metal halide perovskite light-emitting diodes (PeLEDs), blue PeLEDs, particularly deep-blue ones (defined as Commission International de l'Eclairage y coordinate (CIEy) less than 0.06) that meet the latest Rec. 2020 colour gamut standard, lag dramatically behind owing to a severe phase segregation-induced electroluminescent spectral shift and low exciton utilization in broadened bandgap perovskite emitters. Here we propose a multivalent immobilization strategy to realize high-efficiency and spectrally stable deep-blue PeLEDs by introducing a polyfluorinated oxygen-containing molecule. Systematic experiments and extensive 5,000 fs ab initio molecular dynamics simulations reveal that a crucial role of the multivalent effect stemming from three kinds of interaction of hydrogen bond (F···H-N), ionic bond (F-Pb) and coordination bond (C=O:Pb) with perovskite is to synergistically stabilize the perovskite phase and enhance exciton radiative recombination. The resultant exciton concentration and exciton recombination rate of the deep-blue perovskite emitter are increased by factors of 1.66 and 1.64, respectively. In this context, our target PeLEDs demonstrate a peak external quantum efficiency of up to 15.36% at a deep-blue emission wavelength of 459 nm and a half-lifetime of 144 min at a constant current density of 0.45 mA cm-2. Moreover, the deep-blue PeLEDs maintain a constant spectrum peak with CIE chromaticity coordinates of (0.136, 0.051) under a steady driving current for 60 min.

Quantum Wells in Magnesium-Manganese Bimetallic Antiperovskites for High Luminescence

Perovskite has attracted extensive attention in the realm of photovoltaic and light-emitting diodes (LEDs) on account of its outstanding photoelectric properties. Perovskite-type quantum wells (QW) have been developed for high-efficiency perovskite-type LEDs. However, there are few reports on the in situ quantum well structure formed by a bimetallic antiperovskite and its properties. In this work, we report a double/bimetallic antiperovskite composed of magnesium and manganese. It is an in situ homogeneous junction composed of a p-type manganese well layer and an n-type magnesium barrier layer, which promotes the recombination of carriers and increases the luminous efficiency. The in situ quantum wells enable the green antiperovskite LED to have a maximum external quantum efficiency reaching 20.2% and a maximum luminance as high as 19000 cd m-2. These research results provide the chance to produce high-performance LEDs based on an in situ quantum well structure. Meanwhile, the strategy developed in this work is helpful for the design of other highly luminescent lead-free materials.

Structural Mechanisms of Quasi-2D Perovskites for Next-Generation Photovoltaics

Quasi-two-dimensional (2D) perovskite embodies characteristics of both three-dimensional (3D) and 2D perovskites, achieving the superior external environment stability structure of 2D perovskites alongside the high efficiency of 3D perovskites. This effect is realized through critical structural modifications in device fabrication. Typically, perovskites have an octahedral structure, generally ABX3, where an organic ammonium cation (A') participates in forming the perovskite structure, with A'(n) (n = 1 or 2) sandwiched between A(n-1)B(n)X(3n+1) perovskite layers. Depending on whether A' is a monovalent or divalent cation, 2D perovskites are classified into Ruddlesden-Popper perovskite or Dion-Jacobson perovskite, each generating different structures. Although each structure achieves similar effects, they incorporate distinct mechanisms in their formation. And according to these different structures, various properties appear, and additive and optimizing methods to increase the efficiency of 3D perovskites also exist in 2D perovskites. In this review, scientific understanding and engineering perspectives of the quasi-2D perovskite is investigated, and the optimal structure quasi-2D and the device optimization is also discussed to provide the insight in the field.

Improving the light extraction efficiency of white-light perovskite light-emitting diodes based on quantum dot nanowires

This study introduces an innovative strategy to enhance the light extraction efficiency (LEE) of white-light perovskite light-emitting diodes (PeLEDs) by incorporating quantum dot nanowires (QD-NWs) that are prepared by a porous anodic aluminum (PAA) substrate. The QD-NWs were synthesized through a combination of inkjet printing and vacuum deposition based on the PAA substrate which features a unique waveguiding structure that redirects post-color conversion fluorescence along its axis, effectively minimizing energy losses such as reabsorption loss and total internal reflection (TIR) loss. Empirical evidence indicates a significant luminance enhancement of 43.79%, accompanied by an enhancement in current efficiency, for PeLEDs incorporating the QD-NWs. By fine-tuning the structural attributes of the PAA substrate to regulate the size of QD-NWs, this research has successfully developed white-light PeLEDs based on quasi-2D blue perovskite, offering a universal strategy for boosting LEE and propelling the evolution of white-light PeLED technology.

Controlled Synthesis of Perovskite Nanocrystals at Room Temperature by Liquid Crystalline Templates

Perovskite nanocrystals (PNCs) are promising active materials because of their outstanding optoelectronic properties, which are finely tunable via size and shape. However, previous synthetic methods such as hot-injection and ligand-assisted reprecipitation require a high synthesis temperature or provide limited access to homogeneous PNCs, leading to the present lack of commercial value and real-world applications of PNCs. Here, we report a room-temperature approach to synthesize PNCs within a liquid crystalline antisolvent, enabling access to PNCs with a precisely defined size and shape and with reduced surface defects. We demonstrate that elastic strains and long-range molecular ordering of the liquid crystals play a key role in not only regulating the growth of PNCs but also promoting high surface passivation of PNCs with ligands. The approach is a simple, rapid, and room-temperature process, yet it enables access to highly homogeneous PNCs on a mass scale with substantially reduced surface defect states leading to significantly enhanced optoelectronic features. Our results provide a versatile and generalizable strategy to be broadly compatible with a range of nanomaterials and other synthetic methods such as ligand exchange and microfluidic processes.

Real-Time Structural Dynamics at the 3D/2D Perovskite Interface in CsPbBr3/PEA2PbBr4 Nano-heterostructures

Three-dimensional (3D) and two-dimensional (2D) perovskite hybrid systems, known for their exceptional optoelectronic properties and stability, are revolutionizing optoelectronic materials research. However, fundamental physics of the 3D/2D interfaces and their dynamics remain poorly understood. We use fluorescence microspectroscopy to study the photoluminescence (PL) properties of 3D/2D nano-heterostructures of CsPbBr3/PEA2PbBr4 formed by postgrowth self-assembly. The in situ PL spectra uncover the presence of new structural phases, quasi-2D PEA2Csn-1PbnBr3n+1 layers of varying n, at the 3D/2D interface and demonstrate their reversible restructuring under light excitation at room temperature. The restructuring is a result of layer-by-layer cation diffusion at the epitaxial interfaces, manifested as reversible spectral shifts occurring on a time scale of seconds. Such dynamics ultimately leads to optimized distribution of the quasi-2D phases in the system for efficient energy transfer from the 2D to the 3D phases. Our findings provide new insights into controlling energy flow in 3D/2D perovskites for next-generation optoelectronic devices.

Bottom Electrode Modification Enables Efficient and Bright Silicon-Based Top-Emission Perovskite Light-Emitting Diodes

The integration of perovskites with mature silicon platform has emerged as a promising approach in the development of efficient on-chip light sources and high-brightness displays. However, the performance of Si-based green perovskite light-emitting diodes (PeLEDs) still falls significantly short compared to their red and near-infrared counterparts. In this study, it is revealed that the high work function Au, widely employed in Si-based top-emission PeLEDs as the reflective bottom electrode, exhibits considerably lower reflectivity in the green spectrum than in the longer wavelengths. Consequently, Ag electrode is introduced to replace Au to enhance the green light reflectivity, and the ultrathin MoO3 and self-assembled monolayers (SAMs) are sequentially deposited for surface modification. These results indicate that the MoO3 layer removes the energy barrier at Ag/polymer hole transport layer interface, enhancing the hole injection efficiency; while the SAMs firmly anchor onto the MoO3 layer, effectively preventing interfacial defect formation. Benefited from this organic/inorganic dual-layer modification strategy, Si-based green PeLEDs with an impressive peak external quantum efficiency of 18.2% and a maximum brightness of 81931 cd m-2 are successfully fabricated, on par with those of the red and near-infrared counterparts. This achievement marks an advancement in developing high-performance Si-based PeLEDs with full-spectrum output.

Quantum dots enhanced stability of in-situ fabricated perovskite nanocrystals based light-emitting diodes: Electrical field distribution effects

With the development in fabricating efficient perovskite light emitting diodes (PeLEDs), improving the operating stability becomes an urgent task. Here we report quantum dot (QD) enhanced stability of PeLEDs by introducing CdSe/ZnS core-shell QDs in toluene anti-solvent during in-situ fabrication of FAPbBr3 perovskite nanocrystals (PNCs) films. In comparison with PNC films with pristine toluene as the anti-solvent, the as-prepared FAPbBr3 PNC films with a QD monolayer on the surface exhibit improved photoluminescence quantum yield, enhanced photostability and better reproducibility. Benefiting from these advantages, the peak luminance and the maximum external quantum efficiency of the PeLED containing QD monolayer are increased from 6807 cd/m2 to 86,670 cd/m2 and 2.4% to 7.1%, respectively. The T 50 lifetime under the initial luminance of 1021 cd/m2 approaches 83 minutes. Based on electrical field simulation and transient electroluminescence measurements, the enhanced stability can be mainly attributed to the electrical field redistribution induced by the QD monolayer. This work demonstrates that the combination of QDs and perovskites provides an effective strategy to address the operational stability of PeLEDs. The insights into electrical field distribution effect will make great impact on stability improvement of other perovskite based devices.

Effective Dual Cation Release in Quasi-2D Perovskites for Ultrafast UV Light-Powered Imaging

Ruddlesden-Popper quasi-2D perovskites represent robust candidates for optoelectronic applications, achieving a delicate balance between outstanding photoresponse and stability. However, mitigating the internal defects in polycrystalline films remains challenging, and their optoelectronic performances still lag behind that of their 3D counterparts. This work highlights the profound impact of defect passivation at the buried interface and grain boundaries through a dual-cation-release strategy. Cations released from the pre-deposited inorganic iodide buffer layer effectively repair deep-level defects by inducing low-dimensional phase reconstruction and interacting with undercoordinated ions. The resulting quasi-2D perovskite polycrystalline films feature large grain size (>2 µm) and minimum surface roughness, along with alleviated out-of-plane residual tensile strain, which is beneficial for inhibiting the initiation and propagation of cracks. The fabricated photodetector demonstrates drastically improved self-powered photoresponse capability, with maximum responsivity up to 0.41 A W-1 at 430 nm and an ultrafast response speed of 161 ns / 1.91 µs. Moreover, this strategy is compatible with the photolithography-assisted hydrophobic-hydrophilic patterning process for fabricating pixelated photodetector arrays, which enables high-sensitivity imaging. This study presents a feasible defect passivation approach in quasi-2D perovskites, thereby providing insights into the fabrication of high-performance optoelectronic devices.

Manipulating Electron-Phonon Coupling for Efficient Tin Halide Perovskite Blue LEDs

Low-dimensional perovskites have opened up a new frontier in light-emitting diodes (LED) due to their excellent properties. However, concerns regarding the potential toxicity of Pb limited their commercial development. Sn-based perovskites are regarded as a promising candidate to replace Pb-based counterparts, while they generally exhibit strong electron-phonon coupling and consequently blue emission quenching at room temperature (RT), thus the Sn-based perovskite blue LED devices have not yet been reported. Herein, the luminescence properties are regulated by assembling a rigid organic skeleton within perovskite structure, and the protonated 4-bromobenzylamine (BrPMA+ = C7H9BrN+) is employed as A site cation to synthesize a 100-oriented 2D perovskite (BrPMA)2SnBr4, which exhibits a strong lattice rigidity via strong intermolecular interaction and consequently weak electron-phonon coupling, achieving the excellent blue PL emission at RT. The high quality (BrPMA)2SnBr4 perovskite thin films are obtained by further inhibiting oxidation and promoting crystallization. Finally, the Sn-based perovskite blue emission LED is successfully fabricated for the first time at 467 nm with a champion EQE of 1.3% and a maximum brightness of 800 cd m-2. This work gives insights into the luminescence mechanism of Sn-based perovskites and provides a new theoretical basis for the development of lead-free blue LEDs.

Additive-Driven Enhancement of Crystallization: Strategies and Prospects for Boosting Photoluminescence Quantum Yields in Halide Perovskite Films for Light-Emitting Diodes

Halide perovskite light-emitting diodes (PeLEDs) hold great potential for applications in displays and lighting. To enhance the external quantum efficiency (EQE) of PeLEDs, it is crucial to boost the photoluminescence quantum yield (PLQY) of the perovskite films. The use of additives has emerged as a powerful chemical strategy to control the crystallization process in solution-processed perovskite films. The different types of additives that can be used reflect the various types of chemical interactions with the perovskite materials, influencing their crystallization process in various possible ways. Understanding the relationship between these chemical interactions and their impact on the crystallization process is a key step for designing emitters with improved PLQY and devices with superior EQE. Following the logic chain of additive-perovskite interactions, impacts on crystallization, and subsequent enhancement of PLQY and EQE, this review discusses how additives play a pivotal role in influencing the crystallization process to enhance the PLQY of the perovskite films. Furthermore, this assessment addresses the open challenges and outlines future prospects for the development of PeLEDs.

Exciton Dynamics in Layered Halide Perovskite Light-Emitting Diodes

Layered halide perovskites have garnered significant interest due to their exceptional optoelectronic properties and great promises in light-emitting applications. Achieving high-performance perovskite light-emitting diodes (PeLEDs) requires a deep understanding of exciton dynamics in these materials. This review begins with a fundamental overview of the structural and photophysical properties of layered halide perovskites, then delves into the importance of dimensionality control and cascade energy transfer in quasi-2D PeLEDs. In the second half of the review, more complex exciton dynamics, such as multiexciton processes and triplet exciton dynamics, from the perspective of LEDs are explored. Through this comprehensive review, an in-depth understanding of the critical aspects of exciton dynamics in layered halide perovskites and their impacts on future research and technological advancements for layered halide PeLEDs is provided.

Ultrabright and Efficient Green Perovskite Light-Emitting Diodes Enabled by Well-Crystallized Dense CsPbBr3 Nanocubes

Perovskite light-emitting diodes (PeLEDs) are promising for next-generation high-definition displays. One of the keys to achieving high performance PeLEDs lies in how to fabricate crystalline and dense perovskite films. However, there exist challenges to directly grow well-crystallized CsPbBr3 nanocrystal thin films on transport layers due to low solubility in solvents and fast precipitation of all-inorganic CsPbBr3, and the corresponding bright, efficient, and stable green PeLEDs have rarely been reported. Herein, we report an efficient strategy to prepare well-crystallized and dense CsPbBr3 nanocubes for ultrabright and efficient green PeLEDs. We introduce sulfobetaine zwitterion as crystallization control agent and strontium fluoride nanocrystals as nucleation seeds to grow high-quality CsPbBr3 nanocube films. Eventually, the CsPbBr3 films enable green PeLEDs with a maximum luminance of 162 767 cd m-2 and a champion external quantum efficiency of 21.3% along with a narrow spectral line width of ∼14.7 nm, representing state-of-the-art performances in green PeLEDs.

Homogenizing Energy Landscape for Efficient and Spectrally Stable Blue Perovskite Light-Emitting Diodes

Blue perovskite light-emitting diodes (PeLEDs) have attracted enormous attention; however, their unsatisfactory device efficiency and spectral stability still remain great challenges. Unfavorable low-dimensional phase distribution and defects with deeper energy levels usually cause energy disorder, substantially limiting the device's performance. Here, an additive-interface optimization strategy is reported to tackle these issues, thus realizing efficient and spectrally stable blue PeLEDs. A new type of additive-formamidinium tetrafluorosuccinate (FATFSA) is introduced into the quasi-2D mixed halide perovskite accompanied by interface engineering, which effectively impedes the formation of undesired low-dimensional phases with various bandgaps throughout the entire film, thereby boosting energy transfer process for accelerating radiative recombination; this strategy also diminishes the halide vacancies especially chloride-related defects with deep energy level, thus reducing nonradiative energy loss for efficient radiative recombination. Benefitting from homogenized energy landscape throughout the entire perovskite emitting layer, PeLEDs with spectrally-stable blue emission (478 nm) and champion external quantum efficiency (EQE) of 21.9% are realized, which represents a record value among this type of PeLEDs in the pure blue region.

Efficient and Stable Red Perovskite Light-Emitting Diodes via Thermodynamic Crystallization Control

Efficient and stable red perovskite light-emitting diodes (PeLEDs) demonstrate promising potential in high-definition displays and biomedical applications. Although significant progress has been made in device performance, meeting commercial demands remains a challenge in the aspects of long-term stability and high external quantum efficiency (EQE). Here, an in situ crystallization regulation strategy is developed for optimizing red perovskite films through ingenious vapor design. Mixed vapor containing dimethyl sulfoxide and carbon disulfide (CS2) is incorporated to conventional annealing, which contributes to thermodynamics dominated perovskite crystallization for well-aligned cascade phase arrangement. Additionally, the perovskite surface defect density is minimized by the CS2 molecule adsorption. Consequently, the target perovskite films exhibit smooth exciton energy transfer, reduced defect density, and blocked ion migration pathways. Leveraging these advantages, spectrally stable red PeLEDs are obtained featuring emission at 668, 656, and 648 nm, which yield record peak EQEs of 30.08%, 32.14%, and 29.04%, along with prolonged half-lifetimes of 47.7, 60.0, and 43.7 h at the initial luminances of 140, 250, and 270 cd m-2, respectively. This work provides a universal strategy for optimizing perovskite crystallization and represents a significant stride toward the commercialization of red PeLEDs.

Phase stabilization via A-site ion anchoring for ultra-stable perovskite light emitting diodes

A novel ion anchoring strategy stabilizes the perovskite phase, yielding ambient stable perovskite films and ultra-stable perovskite light-emitting diodes (PeLEDs) with an unprecedented operational half-lifetime over 37.2 years at 100 cd m-2 and exceeding 27% efficiency, marking a new stability benchmark for next-generation display and lighting applications.

High-Voltage Stable Perovskite Light-Emitting Diodes Enabled by an Optoelectric-Tunable Sandwiched Nanostructure

While metal halide light-emitting diodes (PeLEDs) with unique optoelectronic properties are promising emitters for next-generation displays, their performance degrades rapidly due to severe ion migration during continuous operation, especially at high voltages. Here, we realize highly stable PeLEDs by designing inorganic dielectric/perovskite semiconductor emitter/organic dielectric sandwiched nanostructures to mitigate ion migration via regulating the electric field distribution. The bilateral cesium carbonate (Cs2CO3) and tetraoctylammonium bromide (TOAB) thin interlayers can not only largely reduce the voltage imposed on the perovskite layer by serving as series resistors and, thus, mitigate the ion migration but also regulate the charge carrier transfer to improve the radiative recombination efficiency. In addition, the underneath inorganic Cs2CO3 film also provides more heterogeneous nucleation sites for growing high-crystallinity perovskite crystals, while the atop TOAB with bifunctional groups (organic amino and Br- ions) refines the morphology and enhances the optical properties of the perovskite film. As a result, efficient and stable green PeLEDs based on such an optoelectric-tunable nanostructure exhibit extremely slow efficiency decay as the applied voltage increases, and the external quantum efficiencies were maintained over 10% at a high bias up to 20 V.

CsPb2Br5 Plates/Quasi-2D Perovskite Heterojunction for Efficient Sky-Blue Light-Emitting Diodes

Perovskite light-emitting diodes (PeLEDs) have gained significant attention owing to their remarkable tunability and color stability, and substantial progress has been made with green and red PeLEDs. However, the advancement of blue PeLEDs still lags far behind their red and green counterparts. In this study, we report efficient sky-blue PeLEDs utilizing an in situ fabricated CsPb2Br5 plates/quasi-2D perovskite heterojunction using chelating molecules to modulate the crystallization process of perovskites. The wide bandgap of CsPb2Br5 facilitated the formation of a type-I band alignment at the heterojunction, allowing efficient carrier transfer from CsPb2Br5 to CsPbBr3. This heterojunction leads to a noteworthy enhancement of device efficiency. The PeLEDs exhibit a maximum brightness of 2311 cd m-2, accompanied by a maximum external quantum efficiency of 12.86% at 487 nm. Our tailored design of CsPb2Br5/perovskite heterojunction thin films offers a promising avenue for advancing PeLED performance. This work contributes valuable insights into the burgeoning field of perovskite electroluminescence, paving the way for further optimization of PeLED technologies.

Coherence Programming for Efficient Linearly Polarized Perovskite Light-Emitting Diodes

Although quasi-two-dimensional (quasi-2D) perovskites are ideal material platforms for highly efficient linearly polarized electroluminescence owing to their anisotropic crystal structures, so far, there has been no practical implementation of these materials for the demonstration of linearly polarized perovskite light-emitting diodes (LP-PeLEDs). This scarcity is due to difficulty in orientation and phase distribution control of the quasi-2D perovskites while minimizing the defects, all of which are required to manifest aligned transition dipole moments (TDMs). To achieve this multifaceted goal, herein, we introduce a synergistic strategy to quasi-2D perovskites by incorporating both a trimethylolpropane triacrylate anchoring layer and 18-Crown-6 molecular passivator into the film fabrication process. It is found that the interfacial anchoring layer guides the oriented growth of perovskites along the (110) plane, whereas the molecular passivator reduces the number of defects and homogenizes the crystal phase. As a result, a quasi-2D perovskite film with macroscopically aligned TDM that renders high radiative recombination and the degree of linear polarization (DoLP) is constructed. This "coherence-programmed emission layer" demonstrates highly efficient LP-PeLEDs, not only achieving a maximum external quantum efficiency of ∼23.7%, a brightness of ∼36,142 cd/m2, and a DoLP of ∼38%, but also significantly improving the signal-to-interference-and-noise ratio in a multi-cell visible light communication system.

Supersaturated Antisolvent-Assisted Crystallization for Highly Efficient Inorganic Perovskite Light-Emitting Diodes

We introduced a strategy to form nanocrystalline CsPbBr3 perovskite films with high luminescence and stability, inhibiting crystal growth using a CsBr supersaturated antisolvent during the antisolvent-assisted crystallization process. We devised this strategy because the supersaturated antisolvent has a higher CsBr concentration over its solubility limit in the saturated antisolvent and consequently will form the smaller perovskite nanocrystalline grains due to the quick precipitation of the CsBr. Here, the CsBr is chosen as a model inorganic antisolvent additive for a crystal growth inhibitor and a passivator. Consequently, we have achieved a nanocrystalline CsPbBr3 film with an average grain size of ∼39 nm by the CsBr supersaturated antisolvent-assisted crystallization process, which is about 41% smaller than the average grain size of the control sample. Hence, the perovskite thin film exhibited a much higher photoluminescence quantum yield than the control film. The maximum current efficiency (CEmax) and the maximum external quantum efficiency (EQEmax) of the corresponding CsPbBr3 perovskite light-emitting diodes (PeLEDs) were approximately twice higher (CEmax of 94.64 cd A-1 and EQEmax of 22.93%) than those of the control device. Simultaneously, the inclusion of CsBr additives played a multifunctional role in diminishing the leakage current of PeLEDs and enhancing their operational lifetime.

Bilateral Embedded Anchoring via Tailored Polymer Brush for Large-Area Air-Processed Blue Light-Emitting Diodes

Perovskite light-emitting diodes (PeLEDs) that can be air-processed promises the development of displaying optoelectronic device, while is challenged by technical difficulty on both the active layer and hole transport layer (HTL) caused by the unavoidable humidity interference. Here, we propose and validate that, planting the polymer brush with tailored functional groups in inorganic HTL, provides unique bilateral embedded anchoring that is capable of simultaneously addressing the n phases crystallization rates in the active layer as well as the deteriorated particulate surface defects in HTL. Exemplified by zwitterionic polyethyleneimine-sulfonate (PEIS) in present study, its implanting in NiOx HTL offers abundant nuclei sites of amino and sulfonate groups that balance the growth rate of different n phases in quasi-2D perovskite films. Moreover, the PEIS effectively nailed the interfacial contact between perovskite and NiOx, and reduced the particulate surface defects in HTL, leading to the enhanced PLQY and stability of large-area blue perovskite film in ambient air. By virtue of these merits, present work achieves the first demonstration of the air-processed blue PeLEDs in large emitting area of 1.0 cm2 with peak external quantum efficiency (EQE) of 2.09 %, which is comparable to the similar pure-bromide blue PeLEDs fabricated in glovebox.

Matched Electron-Transport Materials Enabling Efficient and Stable Perovskite Quantum-Dot-Based Light-Emitting Diodes

Light-emitting diodes (LEDs) based on perovskite quantum dots (QDs), abbreviated as P-QLEDs have been regarded as significantly crucial emitters for lighting and displays. Efficient and stable P-QLEDs still lack ideal electron transport materials (ETM), which could efficiently block hole, transport electron, reduce interface non-radiative recombination and possess high thermal stability. Here, we report 2,4,6-Tris(3'-(pyridine-3-yl) biphenyl-3-yl)-1,3,5-triazine (TmPPPyTz, 3P) with strong electron-withdrawing moieties of pyridine and triazine to modulate the performance of P-QLEDs. Compared with commonly used 1,3,5-Tris(1-phenyl-1H-benzimidazol-2-yl)benzene (TPBi), the pyridine in 3P have a strong interaction with perovskites, which can effectively suppress the interface non-radiative recombination caused by the Pb2+ defects on the surface of QDs. In addition, 3P have deep highest occupied molecular orbital (HOMO) (enhancing hole-blocking properties), matched lowest unoccupied molecular orbital (LUMO) and excellent electron mobility (enhancing electron transport properties), realizing the carrier balance and maximizing the exciton recombination. Furthermore, high thermal resistance of 3P obviously improves the stability of QDs under variable temperature, continuous UV illumination, and electric field excitation. Resultantly, the P-QLEDs using the 3P as ETM achieved an outstanding performance with a champion EQE of 30.2 % and an operational lifetime T50 of 3220 hours at an initial luminance of 100 cd m-2, which is 151 % and about 11-fold improvement compared to control devices (EQE=20 %, T50=297 hours), respectively. These results provide a new concept for constructing the efficient and stable P-QLEDs from the perspective of selective ETM.

Pure-Phase Perovskite Quantum Well for Green Light-Emitting Diodes

Perovskite multiple quantum wells (MQWs) have shown great potential in the field of light-emitting diodes (LEDs). However, the random formation of QWs with varying well widths (n numbers) often leads to suboptimal interface defects and charge transport issues. Here, we reveal that the crystallization sequence of bromide-based perovskite MQWs is large-n QWs preceding small-n QWs. With this insight, we prevent the crystallization of subsequent small-n QWs by reducing the crystallization rate, ultimately resulting in the crystallization of only n = 5 QWs. This reduction in the crystallization rate is achieved through the chemical interaction of dual additives with perovskite constituents. Additionally, the chemical interaction effectively passivates the uncoordinated lead ions defects. Consequently, pure-phase perovskite QWs with a high photoluminescence quantum efficiency of 75% are achieved. The resulting green LEDs achieve a peak external quantum efficiency of 17.1% and a maximum luminance of 29,480 cd m-2, which is attractive for full-color display applications of perovskites.

Chemical Reaction Modulated Low-Dimensional Phase Toward Highly Efficient Sky-Blue Perovskite Light-Emitting Diodes

Blue perovskite light-emitting diodes (PeLEDs) are crucial avenues for achieving full-color displays and lighting based on perovskite materials. However, the relatively low external quantum efficiency (EQE) has hindered their progression towards commercial applications. Quasi-two-dimensional (quasi-2D) perovskites stand out as promising candidates for blue PeLEDs, with optimized control over low-dimensional phases contributing to enhanced radiative properties of excitons. Herein, the impact of organic molecular dopants on the crystallization of various n-phase structures in quasi-2D perovskite films. The results reveal that the highly reactive bis(4-(trifluoromethyl)phenyl)phosphine oxide (BTF-PPO) molecule could effectively restrain the formation of organic spacer cation-ordered layered perovskite phases through chemical reactions, simultaneously passivate those uncoordinated Pb2+ defects. Consequently, the prepared PeLEDs exhibited a maximum EQE of 16.6 % (@ 490 nm). The finding provides a new route to design dopant molecules for phase modulation in quasi-2D PeLEDs.

Reduced-Dimensional Perovskites: Quantum Well Thickness Distribution and Optoelectronic Properties

Reduced-dimensional perovskites (RDPs), a large category of metal halide perovskites, have attracted considerable attention and shown high potential in the fields of solid-state displays and lighting. RDPs feature a quantum-well-based structure and energy funneling effects. The multiple quantum well (QW) structure endows RDPs with superior energy transfer and high luminescence efficiency. The effect of QW confinement directly depends on the number of inorganic octahedral layers (QW thickness, i.e., n value), so the distribution of n values determines the optoelectronic properties of RDPs. Here, it is focused on the QW thickness distribution of RDPs, detailing its effect on the structural characteristics, carrier recombination dynamics, optoelectronic properties, and applications in light-emitting diodes. The reported distribution control strategies is also summarized and discuss the current challenges and future trends of RDPs. This review aims to provide deep insight into RDPs, with the hope of advancing their further development and applications.

Ultralow voltage-driven efficient and stable perovskite light-emitting diodes

The poor operational stability of perovskite light-emitting diodes (PeLEDs) remains a major obstacle to their commercial application. Achieving high brightness and quantum efficiency at low driving voltages, thus effectively reducing heat accumulation, is key to enhancing the operational lifetime of PeLEDs. Here, we present a breakthrough, attaining a record-low driving voltage while maintaining high brightness and efficiency. By thoroughly suppressing interface recombination and ensuring excellent charge transport, our PeLEDs, with an emission peak at 515 nanometers, achieve a maximum brightness of 90,295 candelas per square meter and a peak external quantum efficiency of 27.8% with an ultralow turn-on voltage of 1.7 volts (~70% bandgap voltage). Notably, Joule heat is nearly negligible at these low driving voltages, substantially extending the operational lifetime to 7691.1 hours. Our optimized strategies effectively tackle stability issue through thermal management, paving the way for highly stable PeLEDs.

Buried interface modification and light outcoupling strategy for efficient blue perovskite light-emitting diodes

Perovskite light-emitting diodes (PeLEDs) exhibit remarkable potential in the field of displays and solid-state lighting. However, blue PeLEDs, a key element for practical applications, still lag behind their green and red counterparts, due to a combination of strong nonradiative recombination losses and unoptimized device structures. In this report, we propose a buried interface modification strategy to address these challenges by focusing on the bottom-hole transport layer (HTL) of the PeLEDs. On the one hand, a multifunctional molecule, aminoacetic acid hydrochloride (AACl), is introduced to modify the HTL/perovskite interface to regulate the perovskite crystallization. Experimental investigations and theoretical calculations demonstrate that AACl can effectively reduce the nonradiative recombination losses in bulk perovskites by suppressing the growth of low-n perovskite phases and also the losses at the bottom interface by passivating interfacial defects. On the other hand, a self-assembly nanomesh structure is ingeniously developed within the HTLs. This nanomesh structure is meticulously crafted through the blending of poly-(9,9-dioctyl-fluorene-co-N-(4-butyl phenyl) diphenylamine) and poly (n-vinyl carbazole), significantly enhancing the light outcoupling efficiency in PeLEDs. As a result, our blue PeLEDs achieve remarkable external quantum efficiencies, 20.4% at 487 nm and 12.5% at 470 nm, which are among the highest reported values. Our results offer valuable insights and effective methods for achieving high-performance blue PeLEDs.

Controlling the Phase Distribution of Single Bromide Quasi-2-Dimensional Perovskite Crystals via Solvent Engineering for Pure-Blue Light-Emitting Diodes

To achieve pure-blue emission (460-470 nm), we manipulate the crystallization process of the quasi-2D perovskite, (PBA)2Csn-1PbnBr3n+1, prepared by a solution process. The strategy involves controlling the distribution of "n" phases with different bandgaps, solely utilizing changes in the precursor's supersaturation to ensure that the desired emission aligns with the smallest bandgap. Adjustments in photoluminescence (PL) wavelength are made by changing the solute concentration and solvent polarity, as these factors heavily influence the diffusion of cations, a crucial determinant for the value of "n". Subsequently, we enhance the PL quantum yield from 31 to 51% at 461 nm using trioctylphosphine oxide (TOPO) as an additive of antisolvent, which passivates halide vacancy and promotes orderly crystal growth, leading to faster carrier transfer between phases. With these strategies, we successfully demonstrate pure-blue LEDs with a turn-on voltage of 3.3 V and an external quantum efficiency of 5.5% at an emission peak of 470 nm with a full-width at half-maximum of 31 nm.

Odd-Even Alkyl Chain Effects on the Structure and Charge Carrier Transport of Two-Dimensional Sn-Based Perovskite Semiconductors

Oscillations in the chemical or physical properties of materials, composed of an odd or even number of connected repeating methylene units, are a well-known phenomenon in organic chemistry and materials science. So far, such behavior has not been reported for the important class of materials, perovskite semiconductors. This work reports a distinct odd-even oscillation of the molecular structure and charge carrier transport properties of phenylalkylammonium two-dimensional (2D) Sn-based perovskites in which the alkyl chains in the phenylalkylammonium cations contain varying odd and even carbon numbers. Density functional theory calculations and grazing-incidence wide-angle X-ray scattering characterization reveal that perovskites with organic ligands containing an alkyl chain with an odd number of carbon atoms display a disordered crystal lattice and tilted inorganic octahedra accompanied by reduced mobilities. In contrast, perovskites with cations of an even number of carbon atoms in the alkyl chain form more ordered crystal structures, resulting in improved charge carrier mobilities. Our findings disclose the importance of minor changes in the molecular conformation of organic cations have an effect on morphology, photophysical properties, and charge carrier transport of 2D layered perovskites, showcasing alkyl chain engineering of organic cations to control key properties, of layered perovskite semiconductors.

Pulse-doubling perovskite nanowire lasers enabled by phonon-assisted multistep energy funneling

Laser pulse multiplication from an optical gain medium has shown great potential in miniaturizing integrated optoelectronic devices. Perovskite multiple quantum wells (MQWs) structures have recently been recognized as an effective gain media capable of doubling laser pulses that do not rely on external optical equipment. Although the light amplifications enabled with pulse doubling are reported based on the perovskite MQWs thin films, the micro-nanolasers possessed a specific cavity for laser pulse multiplication and their corresponding intrinsic laser dynamics are still inadequate. Herein, a single-mode double-pulsed nanolaser from self-assembled perovskite MQWs nanowires is realized, exhibiting a pulse duration of 28 ps and pulse interval of 22 ps based on single femtosecond laser pulse excitation. It is established that the continuous energy building up within a certain timescale is essential for the multiple population inversion in the gain medium, which arises from the slowing carrier localization process owning to the stronger exciton-phonon coupling in the smaller-n QWs. Therefore, the double-pulsed lasing is achieved from one fast energy funnel process from the adjacent small-n QWs to gain active region and another slow process from the spatially separated ones. This report may shed new light on the intrinsic energy relaxation mechanism and boost the further development of perovskite multiple-pulse lasers.

Improved Molecular Packing of Self-Assembled Monolayer Charge Injectors for Perovskite Light-Emitting Diodes

Self-assembled monolayers (SAMs) have shown great potential as hole injection materials for perovskite light-emitting diodes due to their low parasitic absorption and ability to adjust energy level alignment. However, the head and anchoring groups on SAM molecules with significant differences in polarity can lead to the formation of micelles in the commonly used alcoholic processing solvent, inhibiting the formation of an intact SAM. In this work, the introduction of methyl groups on carbazole in the phosphonic-acid-based SAM materials is found to facilitate energy level alignment and promote the formation of compact SAMs. The alternative molecular structure also enhances the solvent resistance of poly(9-vinylcarbazole), suppressing interfacial defect densities and nonradiative recombination processes in the emissive perovskites. PeLEDs based on the methyl-containing SAMs exhibit ∼30% enhancement in efficiency. These findings contribute to a better understanding of the design of SAM materials for PeLED applications.

Phase Engineering Reinforced Energy Transfer for High-Performance Blue Perovskite Light-Emitting Diodes

Layered metal-halide perovskites, a category of self-assembled quantum wells, are of paramount importance in emerging photonic sources, such as lasers and light-emitting diodes (LEDs). Despite high trap density in two-dimensional (2D) perovskites, efficient non-radiative energy funneling from wide- to narrow-bandgap components, sustained by the Förster resonance energy transfer (FRET) mechanism, contributes to efficient luminescence by light or electrical injection. Herein, it is demonstrated that bandgap extension of layered perovskites to the blue-emitting regime will cause sluggish and inefficient FRET, stemming from the tiny spectral overlap between different phases. Motivated by the importance of blue LEDs and inefficient energy transfer in materials with phase polydispersity, wide-bandgap quasi-2D perovskites with narrow phase distribution, improved crystallinity, and the pure crystal orientation perpendicular to the charge transport layer are developed. Based on this emitter, high-performance blue perovskite LEDs with improved electroluminescence (EL) external quantum efficiency (EQE) of 7.9% at 478 nm, a narrow full width at half-maximum (FWHM) of 22 nm and a more stable EL spectra are achieved. These results provide an important insight into spectrally stable and efficient blue emitters and EL devices based on perovskites.

GIWAXS experimental methods at the NFPS-BL17B beamline at Shanghai Synchrotron Radiation Facility

The BL17B beamline at the Shanghai Synchrotron Radiation Facility was first designed as a versatile high-throughput protein crystallography beamline and one of five beamlines affiliated to the National Facility for Protein Science in Shanghai. It was officially opened to users in July 2015. As a bending magnet beamline, BL17B has the advantages of high photon flux, brightness, energy resolution and continuous adjustable energy between 5 and 23 keV. The experimental station excels in crystal screening and structure determination, providing cost-effective routine experimental services to numerous users. Given the interdisciplinary and green energy research demands, BL17B beamline has undergone optimization, expanded its range of experimental methods and enhanced sample environments for a more user-friendly testing mode. These methods include single-crystal X-ray diffraction, powder crystal X-ray diffraction, wide-angle X-ray scattering, grazing-incidence wide-angle X-ray scattering (GIWAXS), and fully scattered atom pair distribution function analysis, covering structure detection from crystalline to amorphous states. This paper primarily presents the performance of the BL17B beamline and the application of the GIWAXS methodology at the beamline in the field of perovskite materials.

Efficient Perovskite Nanograin Light-Emitting Diodes in Green-to-Blue Gamut with Co-Additive Engineering

Perovskite nanograins exceeding the Bohr exciton diameter show great potential for high-performance light-emitting diodes (LEDs) owing to their bandgap homogeneity, spatial charge confinement, and nonlocal interaction. However, it is challenging to directly synthesize proper nanograins along with reduced crystal defects on functional substrate, and the corresponding high-efficiency perovskite LEDs (PeLEDs) have rarely been reported. In this study, crystallization modulation for perovskites with an effective co-additive system, including lithium bromide, p-fluorophenethylammonium bromide, and 18-crown-6, is performed. Furthermore, it is demonstrated that the proposed co-additive system can synergistically retard perovskite crystallization and reduce crystal defects. Consequently, high-quality perovskite nanograin solids (≈22.8 nm) are obtained with a high photoluminescence quantum yield (≈88%). These superior optical properties contribute to developing efficient green PeLEDs with a champion external quantum efficiency (EQE) of 28.4% and an average EQE of 27.1%. The co-additive system can be universally applied to mixed-halide perovskite nanograin LED, presenting a maximum EQE of 24.4%, 21.6%, 17.5%, and 11.1% for the blue device at 496, 488, 478, and 472 nm, respectively, along with a narrow spectral linewidth (17-14 nm) and stable color. These results supplement the research on high-efficiency perovskite nanograin LEDs for multicolor displays and lighting.

In Situ Self-Assembled 1D/3D Mixed-Dimensional Perovskite Heterostructures for Efficient White Light Emission

Mixed-dimensional perovskite (MDP) heterostructures are promising optoelectronic semiconductors. Yet, the current preparation methods involve complex experimental procedures and material compatibility constraints, limiting their widespread applications. Here, we present a one-step room temperature solution-based approach to synthesize a range of 1D C4N2H14PbBr4 and 3D APbBr3 (A = Cs+, MA+, FA+) self-assembled MDP heterostructures exhibiting high-efficiency white light-emitting properties. The ultra-broadband emission results from the synergy between the self-captured blue broadband emission from 1D perovskites and the green emission of 3D perovskites, covering the entire visible-light spectrum with a full width at half-maximum exceeding 170 nm and a remarkable photoluminescence quantum yield of 26%. This work establishes a novel prototype for the preparation of highly luminescent MDP heterostructures, offering insights for future research and industrialization in the realm of white light LEDs.

Efficient and stable hybrid perovskite-organic light-emitting diodes with external quantum efficiency exceeding 40 per cent

Light-emitting diodes (LEDs) based on perovskite semiconductor materials with tunable emission wavelength in visible light range as well as narrow linewidth are potential competitors among current light-emitting display technologies, but still suffer from severe instability driven by electric field. Here, we develop a stable, efficient and high-color purity hybrid LED with a tandem structure by combining the perovskite LED and the commercial organic LED technologies to accelerate the practical application of perovskites. Perovskite LED and organic LED with close photoluminescence peak are selected to maximize photon emission without photon reabsorption and to achieve the narrowed emission spectra. By designing an efficient interconnecting layer with p-type interface doping that provides good opto-electric coupling and reduces Joule heating, the resulting green emitting hybrid LED shows a narrow linewidth of around 30 nm, a peak luminance of over 176,000 cd m-2, a maximum external quantum efficiency of over 40%, and an operational half-lifetime of over 42,000 h.

Post-hot-cast annealing deposition of perovskite films with infused multifunctional organic molecules to enhance the performance of large-area light-emitting devices

All-inorganic perovskites show great promise as an emission layer in perovskite light-emitting diodes (PeLEDs) owing to their easy solution processing, low manufacturing cost, and excellent optoelectronic properties. However, there is still an immense performance gap from small-area devices to large-area PeLED devices. The inhomogeneity of large-area high-quality perovskite films inevitably leads to vast defects and electroluminescence performance losses. Herein, a post-hot-cast annealing deposition scheme and the introduction of the multifunctional molecule 2-amino-1,3-propanediol (APDO) were proposed to regulate the crystallization of the perovskite film. As a result, uniform APDO:CsPbBr2.5Cl0.5 perovskite films with high crystallinity and lower defect density were deposited by post-hot-cast annealing. A decent maximum brightness of 2659 cd m-2 was achieved for the large-area cyan PeLEDs with an emitting area of 400 mm2.

Regulating Surface-Passivator Binding Priority for Efficient Perovskite Light-Emitting Diodes

Suppressing trap-assisted nonradiative losses through passivators is a prerequisite for efficient perovskite light-emitting diodes (PeLEDs). However, the complex bonding between passivators and perovskites severely suppresses the passivation process, which still lacks comprehensive understanding. Herein, the number, category, and degree of bonds between different functional groups and the perovskite are quantitatively assessed to study the passivation dynamics. Functional groups with high electrostatic potential and large steric hindrance prioritize strong bonding with organic cations and halides on the perfect surface, leading to suppressed coordination with bulky defects. By modulating the binding priorities and coordination capacity, hindrance from the intense interaction with perfect perovskite is significantly reduced, leading to a more direct passivation process. Consequently, the near-infrared PeLED without external light out-coupling demonstrates a record external quantum efficiency of 24.3% at a current density of 42 mA cm-2. In addition, the device exhibits a record-level-cycle ON/OFF switching of 20 000 and ultralong half-lifetime of 1126.3 h under 5 mA cm-2. An in-depth understanding of the passivators can offer new insights into the development of high-performance PeLEDs.

Effective Small Organic Molecule as a Defect Passivator for Highly Efficient Quasi-2D Perovskite Light-Emitting Diodes

The use of a small organic molecular passivator is proven to be a successful strategy for producing higher-performing quasi-2D perovskite light-emitting diodes (PeLEDs). The small organic molecule can passivate defects on the grain surround and surface of perovskite crystal structures, preventing nonradiative recombination and charge trapping. In this study, a new small organic additive called 2, 8-dibromodibenzofuran (diBDF) is reported and examines its effectiveness as a passivating agent in high-performance green quasi-2D PeLEDs. The oxygen atom in diBDF, acting as a Lewis base, forms coordination bonds with uncoordinated Pb2+, so enhancing the performance of the device. In addition, the inclusion of diBDF in the quasi-2D perovskite results in a decrease in the abundance of low-n phases, hence facilitating efficient carrier mobility. Consequently, PeLED devices with high efficiency are successfully produced, exhibiting an external quantum efficiency of 19.9% at the emission wavelength of 517 nm and a peak current efficiency of 65.0 cd A-1.

Electrohydrodynamic Inkjet Printing of Three-Dimensional Perovskite Nanocrystal Arrays for Full-Color Micro-LED Displays

Perovskite nanocrystal (PeNC) arrays are showing a promising future in the next generation of micro-light-emitting-diode (micro-LED) displays due to the narrow emission linewidth and adjustable peak wavelength. Electrohydrodynamic (EHD) inkjet printing, with merits of high resolution, uniformity, versatility, and cost-effectiveness, is among the competent candidates for constructing PeNC arrays. However, the fabrication of red light-emitting CsPbBrxI(3-x) nanocrystal arrays for micro-LED displays still faces challenges, such as low brightness and poor stability. This work proposes a design for a red PeNC colloidal ink that is specialized for the EHD inkjet printing of three-dimensional PeNC arrays with enhanced luminescence and stability as well as being adaptable to both rigid and flexible substrates. Made of a mixture of PeNCs, polymer polystyrene (PS), and a nonpolar xylene solvent, the PeNC colloidal ink enables precise control of array sizes and shapes, which facilitates on-demand micropillar construction. Additionally, the inclusion of PS significantly increases the brightness and environmental stability. By adopting this ink, the EHD printer successfully fabricated full-color 3D PeNC arrays with a spatial resolution over 2500 ppi. It shows the potential of the EHD inkjet printing strategy for high-resolution and robust PeNC color conversion layers for micro-LED displays.

Efficient Homojunction/Heterojunction Photocatalyst via Integrating CsPbBr3 Quantum Dot Homojunction with TiO2 for Degradation of Organic Dyes

A novel TiO2-CsPbBr3(Q) photocatalyst is proposed and rationally constructed, where CsPbBr3 perovskite quantum dots (QDs) of various sizes inside mesopore TiO2 (M-TiO2) are integrated. These perovskite QDs, generated in situ within M-TiO2, establish a type-II homojunction. Interestingly, a Z-scheme heterojunction is simultaneously formed at the interface between CsPbBr3 and TiO2. Due to the coexistence of the type-II homojunction and the Z-scheme heterojunction, photogenerated electrons are effectively transferred from TiO2 to CsPbBr3, thereby suppressing carrier recombination and thus enhancing the degradation of rhodamine B (RhB). Compared with pure CsPbBr3 and TiO2, TiO2-CsPbBr3(Q) shows significantly enhanced photocatalytic performance for RhB degradation. The degradation efficiency of RhB in the presence of the TiO2-CsPbBr3(Q) attains 97.7% in 5 min under light illumination, representing the highest efficiency observed among photocatalysts based on TiO2. This study will facilitate the development of superior semiconductor catalysts for photocatalytic applications.