Unique reactivity of nanoporous cellulosic materials mediated by surface-confined water

Recent advances in the extraction of nanocellulose from lignocellulosic waste for wastewater treatment applications

Nano-cellulose is a sustainable and high-performance nanomaterial which developed as a transformative solution in different fields due to its excellent properties, including large surface area, and biodegradability. This review paper explored the different types of nano-cellulose (NC) that are Cellulose Nanocrystals, Cellulose Nano-fibers, and Bacterial NC and their distinctive characteristics that make a suitable for advanced applications and also focused on lignocellulosic materials, abundant renewable resources composed of cellulose, hemicellulose, lignin, and their complex structure, while challenging to analyze, offers significant potential for the extraction of nano-cellulose via the advanced process. Furthermore, this work emphasizes the methods used to extract the NCfrom lignocellulosic waste (LCW) and enzymatic pretreatment techniques that improve the efficiency of the process and highlight the fabrication of nano-cellulose membranes and their incorporation into wastewater treatment applications. The superior adsorption capacity and ability to remove organic pollutants, and pathogens make these membranes a capable solution to address the global water purification problems and also underscore the dual benefit of environmental sustainability. This comprehensive examination of nano-cellulose, its extraction from lignocellulosic biomass, and its application in wastewater treatment covered the way for innovations in renewable resources and green technologies.

Atomistic insights into the humidity response of nanocellulose: a molecular dynamics study

CONTEXT

TEMPO-oxidized cellulose nanofibers (TOCNFs) show significant potential for developing high-performance resistive humidity sensors due to their hydrophilicity and structural adaptability. However, the underlying atomic-scale mechanisms governing their humidity response remain poorly understood. Using molecular dynamics simulations, this study investigates how crystal facets, nanopore widths, and humidity levels influence the surface wettability, water permeability, and swelling of TOCNFs. Our findings reveal that the (1 1 - 0) crystal facet exhibits the highest hydrophilicity, while the (100) facet is the least hydrophilic. Narrower nanopores and more hydrophilic facets enhance capillary adsorption, significantly influencing water penetration depth. Additionally, nanopore swelling is highly dependent on the crystal facet, with the (1 1 - 0) facet showing the most pronounced expansion. These insights provide a foundation for designing high-performance TOCNF-based humidity sensors.

METHODS

The humidity response of TOCNFs is simulated using the large-scale atomic molecular massively parallel simulator (LAMMPS) package with the OPLS-AA force field to describe interatomic interactions. The open-source visualization tool OVITO is employed to visualize the atomic configurations.

Regioselective functionalization of cellulose nanomaterial for advanced application

Cellulose nanomaterials (CNMs) with their remarkable properties and abundant natural sources have emerged as a versatile platform for material science. However, their widespread adoption to develop novel applications often hinges on precise control over their surface chemistry. Regioselective functionalization, i.e., the ability to modify specific hydroxy groups on the cellulose backbone or aldehyde reducing end group (REG), offers unparalleled control on their surface chemistry. This review highlights the exciting developments in regioselective functionalization of CNMs and their impacts on structure-property relationships. Key factors that influence regioselectivity are examined and exciting applications of regioselectively functionalized CNMs are reviewed. This review also highlights the need for efficient, large-scale regioselective functionalization techniques and identifies key areas for future research.

Wood and Cellulose: the Most Sustainable Advanced Materials for Past, Present, and Future Civilizations

Wood, with its constituent building block cellulose, is by far the most common biomaterial on the planet and has been the most important material used by humans to establish civilization. If there is one single biomaterial that should be studied and used by materials scientists across disciplines to achieve a sustainable future, it is cellulose. This perspective provides insights for the general materials science community about the unique properties of wood and cellulose and how they may be used in advanced sustainable materials to make a substantial societal impact. The focus is on sawn wood or cellulose fibers produced at scale by industry and the more recent cellulosic nanomaterials, highlighting the areas where these cellulose-based materials can be valorized into higher-order functions. Numerous articles have comprehensively reviewed different areas where cellulose is currently used in advanced materials science. The objective here is to provide general insight for all material scientists and to provide the opinions about the areas in which cellulose and wood have the largest potential to make a significant societal impact, especially to realize next-generation sustainable materials for construction, food, water, energy, and information. Discussing key areas where future research is needed to open avenues toward a more sustainable future is ended.

Length-dependent water permeation through a graphene channel

Water confined in two-dimensional channels exhibits unique properties, such as rich morphology, specific phase transition and a low dielectric constant. In this work, molecular dynamics simulations have been used to study the water transport in two-dimensional graphene channels. The structures and dynamics of water under confinement show strong dependence on the channel length and thickness of the channels. In particular, there exists a critical channel length beyond which monolayer water forms square-like ice structures, leading to the rapid decrease in water flow that eventually ceases completely. The water flow for double-layer and three-layer systems exhibits a similar exponential decay but does not reach zero. The translocation time exhibits an excellent power-law behavior with an increase in the channel length, accounting for the exponential flow decay. The radial distribution function confirms the length-dependent liquid-to-ice phase transition of monolayer water and the liquid states for double-layer and three-layer systems. The formation of monolayer ice can be further supported by the increasing barriers in the potential of mean force and specific dipole distributions. Furthermore, the melting temperature of monolayer ice increases significantly with the increase in the channel length that can also be close to or even exceeds the boiling point at atmospheric pressure. These findings provide new physical insights into the extraordinary length-dependent water behaviors and suggest future experimental studies on high-temperature ice through the size control in nanochannels.

Equilibrium Moisture Mediated Esterification Reaction to Achieve Over 100% Lignocellulosic Nanofibrils Yield

Lignocellulosic nanofibrils (LCNFs) isolation is recognized as an efficient strategy for maximizing biomass utilization. Nevertheless, achieving a 100% yield presents a formidable challenge. Here, an esterification strategy mediated by the equilibrium moisture in biomass is proposed for LCNFs preparation without the use of catalysts, resulting in a yield exceeding 100%. Different from anhydrous chemical thermomechanical pulp (CTMP0%), the presence of moisture (moisture content of 7 wt%, denoted as CTMP7%) introduces a notably distinct process for the pretreatment of CTMP, comprising the initial disintegration and the post-esterification steps. The maleic acid, generated through maleic anhydride (MA) hydrolysis, degrades the recalcitrant lignin-carbohydrate complex (LCC) structures, resulting in esterified CTMP7% (E-CTMP7%). The highly grafted esters compensate for the mass loss resulting from the partial removal of hydrolyzed lignin and hemicellulose, ensuring a high yield. Following microfluidization, favorable LCNF7% with a high yield (114.4 ± 3.0%) and a high charge content (1.74 ± 0.09 mmol g-1) can be easily produced, surpassing most previous records for LCNFs. Additionally, LCNF7% presented highly processability for filaments, films, and 3D honeycomb structures preparation. These findings provide valuable insights and guidance for achieving a high yield in the isolation of LCNFs from biomass through the mediation of equilibrium moisture.

Spatial confinement Fenton oxidation realized via tunable nanopore structure of porous carbon

Spatially confined structure exhibits surprising physics and chemistry properties that significantly impact the thermodynamics and kinetics of oxidation reactions. Herein, porous carbons are rationally designed for tunable nanopore structures (micropores, 4.12 % ∼ 91.64 %) and diverse spatial confinement ability, as indicated by their differential enhancement performances in the Fenton oxidation. Porous carbons can alter the characteristics of the charge transport process for accelerating sustainable electron shuttle between hydrogen peroxide and iron species, and thus exhibit long-term performance (17 cycling tests). The positive spatial confinement for boosting Fenton oxidation (charge transport, mass transfer) occurs in nanochannels < 1 nm, while the diminished effect ranges of 1-1.5 nm, and the adverse effect ranges greater than 1.5 nm. The density functional theory calculation provides further support for certifying the promoted charge transport process and spatial confinement for hydroxyl radical inside the confined nanochannel structure (below 1 nm, especially) by the comparatively large electron cloud and the relatively negative adsorption energy, respectively. Coupling nanochannels with the Fenton oxidation greatly utilize hydrogen peroxide, due to spatial nanoconfinement and selective adsorption towards target contaminants. This strategy of deploying nanochannels in catalyst design can be applied for the elaborate construction of efficient nanostructured catalysts for environmental remediation.

The preparation, resources, applications, and future trends of nanofibers in active food packaging: a review

Active packaging is a novel strategy for maintaining the shelf life of products and ensuring their safety, freshness, and integrity that has emerged with the consumer demand for safer, healthier, and higher quality food. Nanofibers have received a lot of attention for the application in active food packaging due to their high specific surface area, high porosity, and high loading capacity of active substances. Three common methods (electrospinning, solution blow spinning, and centrifugal spinning) for the preparation of nanofibers in active food packaging and their influencing parameters are presented, and advantages and disadvantages between these methods are compared. The main natural and synthetic polymeric substrate materials for the nanofiber preparation are discussed; and the application of nanofibers in active packaging is elaborated. The current limitations and future trends are also discussed. There have been many studies on the preparation of nanofibers using substrate materials from different sources for active food packaging. However, most of these studies are still in the laboratory research stage. Solving the issues of preparation efficiency and cost of nanofibers is the key to their application in commercial food packaging.

Integrating Cellulose Microfibrils and Ellagitannins from Rambutan Peel with Gelatin for Production of Synergistic Biobased Hydrogels

The pursuit of renewable and eco-friendly raw materials for biobased materials is a growing field. This study utilized ellagitannin and cellulose microfibrils derived from rambutan peel waste alongside gelatin to develop eco-conscious hydrogels. The cellulose/gelatin hydrogels were formulated in two weight ratios (0.5:1 to 1:1), and the influence of gelatin on the chemical composition and rheology was studied. Composite hydrogels, functionalized with an ellagitannin-rich extract, exhibited a remarkable enhancement of up to 14-fold in compressive strength. The hydrogels also demonstrated antimicrobial properties, reducing the Staphylococcus aureus colony count within 24 h. The hydrogel, derived from rambutan peel waste, is biocompatible and could potentially be explored for biomedical applications such as drug delivery systems, and wound dressings. This suggests that it might offer significant value for sustainable materials science, although specific applications have yet to be tested.

Ball Milling Improves Physicochemical, Functionality, and Emulsification Characteristics of Insoluble Dietary Fiber from Polygonatum sibiricum

The effects of ball milling on the physicochemical, functional, and emulsification characteristics of Polygonatum sibiricum insoluble dietary fiber (PIDF) were investigated. Through controlling milling time (4, 5, 6, 7, and 8 h), five PIDFs (PIDF-1, PIDF-2, PIDF-3, PIDF-4, and PIDF-5) were obtained. The results showed that ball milling effectively decreased the particle size and increased the zeta-potential of PIDF. Scanning electron microscope results revealed that PIDF-5 has a coarser microstructure. All PIDF samples had similar FTIR and XRD spectra. The functional properties of PIDF were all improved to varying degrees after ball milling. PIDF-3 had the highest water-holding capacity (5.12 g/g), oil-holding capacity (2.83 g/g), water-swelling capacity (3.83 mL/g), total phenol (8.12 mg/g), and total flavonoid (1.91 mg/g). PIDF-4 had the highest ion exchange capacity. Fat and glucose adsorption capacity were enhanced with ball milling time prolongation. PIDF-5 exhibited a contact angle of 88.7° and lower dynamic interfacial tension. Rheological results showed that PIDF-based emulsions had shear thinning and gel-like properties. PE-PIDF-5 emulsion had the smallest particle size and the highest zeta-potential value. PE-PIDF-5 was stable at pH 7 and high temperature. The findings of this study are of great significance to guide the utilization of the by-products of Polygonatum sibiricum.

Confined Water Dynamics in the Scaffolds of Polylactic Acid

Resorbable polylactic acid (PLA) ultrathin fibers have been applied as scaffolds for tissue engineering applications due to their micro- and nanoporous structure that favor cell adhesion, besides inducing cell proliferation and upregulating gene expression related to tissue regeneration. Incorporation of multiwalled carbon nanotubes into PLA fibers has been reported to increase the mechanical properties of the scaffold, making them even more suitable for tissue engineering applications. Ideally, scaffolds should be degraded simultaneously with tissue growth. Hydration and swelling are factors related to scaffold degradation. Hydration would negatively impact the mechanical properties since PLA shows hydrolytic degradation. Water absorption critically affects the catalysis and allowance of the hydrolysis reactions. Moreover, either mass transport and chemical reactions are influenced by confined water, which is an unexplored subject for PLA micro- and nanoporous fibers. Here, we probe and investigate confined water onto highly porous PLA microfibers containing few amounts of incorporated carbon nanotubes by Fourier transform infrared (FTIR) spectroscopy. A hydrostatic pressure was applied to the fibers to enhance the intermolecular interactions between water molecules and C=O groups from polyester bonds, which were evaluated over the wavenumber between 1600 and 2000 cm-1. The analysis of temperature dependence of FTIR spectra indicated the presence of confined water which is characterized by a non-Arrhenius to Arrhenius crossover at T0 = 190 K for 1716 and 1817 cm-1 carbonyl bands of PLA. These bands are sensitive to a hydrogen bond network of confined water. The relevance of our finding relies on the challenge detecting confined water in hydrophobic cavities as in the PLA one. To the best of our knowledge, we present the first report referring the presence of confined water in a hydrophobic scaffold as PLA for tissue engineering. Our findings can provide new opportunities to understand the role of confined water in tissue engineering applications. For instance, we argue that PLA degradation may be affected the most by confined water. PLA degradation involves hydrolytic and enzymatic degradation reactions, which can both be sensitive to changes in water properties.

Suppressed terahertz dynamics of water confined in nanometer gaps

Nanoconfined waters exhibit low static permittivity mainly due to interfacial effects that span about one nanometer. The characteristic length scale may be much longer in the terahertz (THz) regime where long-range collective dynamics occur; however, the THz dynamics have been largely unexplored because of the lack of a robust platform. Here, we use metallic loop nanogaps to sharply enhance light-matter interactions and precisely measure real and imaginary THz refractive indices of nanoconfined water at gap widths ranging from 2 to 20 nanometers, spanning mostly interfacial waters all the way to quasi-bulk waters. We find that, in addition to the well-known interfacial effect, the confinement effect also contributes substantially to the decrease in the complex refractive indices of the nanoconfined water by cutting off low-energy vibrational modes, even at gap widths as large as 10 nanometers. Our findings provide valuable insights into the collective dynamics of water molecules which is crucial to understanding water-mediated processes.

Fully Bio-Based Ionic Liquids for Green Chemical Modification of Cellulose in the Activated-State

Biopolymers, especially cellulose, are vital to transitioning to a circular economy and reducing our reliance on fossil fuels. However, for many applications a high degree of cellulose hydroxyl modification is necessary. The challenge is that the chemical features of the hydroxyls of cellulose and water are similar. Therefore, chemical modification of cellulose is often explored under non-aqueous conditions with systems that result in high hydroxyl accessibility and reduce cellulose aggregation. Unfortunately, these systems depend on hazardous and complex solvents from fossil resources, which diverge from the initial sustainability objectives. To address this, we developed three new betaine-based ionic liquids that are fully bio-based, scalable, and green. We found that a specific ionic liquid had the perfect chemical features for the chemical activation of cellulose without disturbing its crystalline ordering. The high activation in heterogeneous conditions was exemplified by reacting cellulose with succinic anhydride, resulting in more than 30 % conversion of all hydroxyls on cellulose. Overall, this work opens new perspectives for the derivatization of cellulosic materials while simultaneously "keeping it green".

Cellulose fibers and ellagitannin-rich extractives from rambutan (Nephelium Lappaceum L.) peel by an eco-friendly approach

This study assesses the viability of an accelerated solvent extraction technique employing environmentally friendly solvents to extract ellagitannins while producing cellulose-rich fibers from rambutan peel. Two sequential extraction protocols were investigated: 1) water followed by acetone/water (4:1, v:v), and 2) acetone followed by acetone/water (4:1, v:v), both performed at 50 °C. The first protocol had a higher extraction yield of 51 %, and the obtained extractives featured a higher total phenolic (531.4 ± 22.0 mg-GAE/g) and flavonoid (487.3 ± 16.9 mg-QE/g) than the second protocol (495.4 ± 32.8 mg-GAE/g and 310.6 ± 31.4 mg-QE/g, respectively). The remaining extractive-free fibers were processed by bleaching using either 2 wt% sodium hydroxide with 3 wt% hydrogen peroxide or 4-5 wt% peracetic acid. Considering bleaching efficiency, yield, and process sustainability, the single bleaching treatment with 5 wt% of peracetic acid was selected as the most promising approach to yield cellulose-rich fibers. The samples were analyzed by methanolysis to determine the amount and type of poly- and oligosaccharides and studied by 13C solid-state nuclear magnetic resonance spectroscopy and thermal gravimetric analysis. The products obtained from the peels demonstrate significant potential for use in various sectors, including food, nutraceuticals, cosmetics, and paper production.

Facile preparation of re-dispersible/amphoteric nanochitin powder via choline chloride/propanedioic composite for stabilizing Pickering emulsions

Choline chloride (ChCl)/propanedioic acid (PA) based hydrated composites are synthesized for producing nanochitins from crab shell in this work. The yield of nanochitin remains higher than 75 %, even if the water content reaches 80 %. ChCl is found necessary for the successful nano-fibrillation of chitin. However, PA contributes more to the yield improvement of nanochitin. ChCl mediated PA hydrolysis leads to the successful grafting of carboxyl groups in nanochitins, contributing to its amphoteric dispersed nature. After salt-induced separation and freeze-drying treatment, dried nanochitin powder can be prepared and found to disperse well either in acidic or alkaline suspension, exhibiting efficient drying/redispersion performance. The well amphoteric and drying/redispersion nature both benefit the facile preparation of nanochitin-based Pickering emulsions. For Pickering emulsion prepared under different pH, creaming only appears under acidic conditions (pH 3) for which the creaming index reaches 10.56 % after 30 days of storage. No obvious de-emulsification can be observed under pH 7 and 10. The efficient amphoteric and drying/redispersion nature together with the simplified preparation process of nanochitins are believed to facilitate the processing and practical applications of nanochitin.

The Critical Roles of Water in the Processing, Structure, and Properties of Nanocellulose

The cellulose industry depends heavily on water owing to the hydrophilic nature of cellulose fibrils and its potential for sustainable and innovative production methods. The emergence of nanocellulose, with its excellent properties, and the incorporation of nanomaterials have garnered significant attention. At the nanoscale level, nanocellulose offers a higher exposure of hydroxyl groups, making it more intimate with water than micro- and macroscale cellulose fibers. Gaining a deeper understanding of the interaction between nanocellulose and water holds the potential to reduce production costs and provide valuable insights into designing functional nanocellulose-based materials. In this review, water molecules interacting with nanocellulose are classified into free water (FW) and bound water (BW), based on their interaction forces with surface hydroxyls and their mobility in different states. In addition, the water-holding capacity of cellulosic materials and various water detection methods are also discussed. The review also examines water-utilization and water-removal methods in the fabrication, dispersion, and transport of nanocellulose, aiming to elucidate the challenges and tradeoffs in these processes while minimizing energy and time costs. Furthermore, the influence of water on nanocellulose properties, including mechanical properties, ion conductivity, and biodegradability, are discussed. Finally, we provide our perspective on the challenges and opportunities in developing nanocellulose and its interplay with water.

Direct ink writing of multifunctional nanocellulose and allyl-modified gelatin biomaterial inks for the fabrication of mechanically and functionally graded constructs

Recreating the intricate mechanical and functional gradients found in natural tissues through additive manufacturing poses significant challenges, including the need for precise control over time and space and the availability of versatile biomaterial inks. In this proof-of-concept study, we developed a new biomaterial ink for direct ink writing, allowing the creation of 3D structures with tailorable functional and mechanical gradients. Our ink formulation combined multifunctional cellulose nanofibrils (CNFs), allyl-functionalized gelatin (0.8-2.0 wt%), and polyethylene glycol dithiol (3.0-7.5 wt%). The CNF served as a rheology modifier, whereas a concentration of 1.8 w/v % in the inks was chosen for optimal printability and shape fidelity. In addition, CNFs were functionalized with azido groups, enabling the spatial distribution of functional moieties within a 3D structure. These functional groups were further modified using a spontaneous click chemistry reaction. Through additive manufacturing and a readily available static mixer, we successfully demonstrated the fabrication of mechanical gradients - ranging from 3 to 6 kPa in indentation strength - and functional gradients. Additionally, we introduced dual gradients by combining gradient printing with an anisotropic photocrosslinking step. The developed biomaterial ink opens up possibilities for printing intricate multigradient structures, resembling the complex hierarchical organization seen in living tissues.

Solution-state nuclear magnetic resonance spectroscopy of crystalline cellulosic materials using a direct dissolution ionic liquid electrolyte

Owing to its high sustainable production capacity, cellulose represents a valuable feedstock for the development of more sustainable alternatives to currently used fossil fuel-based materials. Chemical analysis of cellulose remains challenging, and analytical techniques have not advanced as fast as the development of the proposed materials science applications. Crystalline cellulosic materials are insoluble in most solvents, which restricts direct analytical techniques to lower-resolution solid-state spectroscopy, destructive indirect procedures or to 'old-school' derivatization protocols. While investigating their use for biomass valorization, tetralkylphosphonium ionic liquids (ILs) exhibited advantageous properties for direct solution-state nuclear magnetic resonance (NMR) analysis of crystalline cellulose. After screening and optimization, the IL tetra-n-butylphosphonium acetate [P₄₄₄₄][OAc], diluted with dimethyl sulfoxide-d₆, was found to be the most promising partly deuterated solvent system for high-resolution solution-state NMR. The solvent system has been used for the measurement of both 1D and 2D experiments for a wide substrate scope, with excellent spectral quality and signal-to-noise, all with modest collection times. The procedure initially describes the scalable syntheses of an IL, in 24-72 h, of sufficient purity, yielding a stock electrolyte solution. The dissolution of cellulosic materials and preparation of NMR samples is presented, with pretreatment, concentration and dissolution time recommendations for different sample types. Also included is a set of recommended 1D and 2D NMR experiments with parameters optimized for an in-depth structural characterization of cellulosic materials. The time required for full characterization varies between a few hours and several days.

Spatial confinement: A green pathway to promote the oxidation processes for organic pollutants removal from water

Organic pollutants removal from water is pressing owing to the great demand for clean water. Oxidation processes (OPs) are the commonly used method. However, the efficiency of most OPs is limited owing to the poor mass transfer process. Spatial confinement is a burgeoning way to solve this limitation by use of nanoreactor. Spatial confinement in OPs would (i) alter the transport characteristics of protons and charges; (ii) bring about molecular orientation and rearrangement; (iii) cause the dynamic redistribution of active sites in catalyst and reduce the entropic barrier that is high in unconfined space. So far, spatial confinement has been utilized for various OPs, such as Fenton, persulfate, and photocatalytic oxidation. A comprehensive summary and discussion on the fundamental mechanisms of spatial confinement mediated OPs is needed. Herein, the application, performance and mechanisms of spatial confinement mediated OPs are overviewed firstly. Subsequently, the features of spatial confinement and their effects on OPs are discussed in detail. Furthermore, environmental influences (including environmental pH, organic matter and inorganic ions) are studied with analyzing their intrinsic connection with the features of spatial confinement in OPs. Lastly, challenges and future development direction of spatial confinement mediated OPs are proposed.

Biobased Nanomaterials─The Role of Interfacial Interactions for Advanced Materials

This review presents recent advances regarding biomass-based nanomaterials, focusing on their surface interactions. Plant biomass-based nanoparticles, like nanocellulose and lignin from industry side streams, hold great potential for the development of lightweight, functional, biodegradable, or recyclable material solutions for a sustainable circular bioeconomy. However, to obtain optimal properties of the nanoparticles and materials made thereof, it is crucial to control the interactions both during particle production and in applications. Herein we focus on the current understanding of these interactions. Solvent interactions during particle formation and production, as well as interactions with water, polymers, cells and other components in applications, are addressed. We concentrate on cellulose and lignin nanomaterials and their combination. We demonstrate how the surface chemistry of the nanomaterials affects these interactions and how excellent performance is only achieved when the interactions are controlled. We furthermore introduce suitable methods for probing interactions with nanomaterials, describe their advantages and challenges, and introduce some less commonly used methods and discuss their possible applications to gain a deeper understanding of the interfacial chemistry of biobased nanomaterials. Finally, some gaps in current understanding and interesting emerging research lines are identified.

Versatile Assembly of Metal-Phenolic Network Foams Enabled by Tannin-Cellulose Nanofibers

Metal-phenolic network (MPN) foams are prepared using colloidal suspensions of tannin-containing cellulose nanofibers (CNFs) that are ice-templated and thawed in ethanolic media in the presence of metal nitrates. The MPN facilitates the formation of solid foams by air drying, given the strength and self-supporting nature of the obtained tannin-cellulose nanohybrid structures. The porous characteristics and (dry and wet) compression strength of the foams are rationalized by the development of secondary, cohesive metal-phenolic layers combined with a hydrogen bonding network involving the CNF. The shrinkage of the MPN foams is as low as 6% for samples prepared with 2.5-10% tannic acid (or condensed tannin at 2.5%) with respect to CNF content. The strength of the MPN foams reaches a maximum at 10% tannic acid (using Fe^(III) ions), equivalent to a compressive strength 70% higher than that produced with tannin-free CNF foams. Overall, a straightforward framework is introduced to synthesize MPN foams whose physical and mechanical properties are tailored by the presence of tannins as well as the metal ion species that enable the metal-phenolic networking. Depending on the metal ion, the foams are amenable to modification according to the desired application.

Electrospun Nanomaterials Based on Cellulose and Its Derivatives for Cell Cultures: Recent Developments and Challenges

The development of electrospun nanofibers based on cellulose and its derivatives is an inalienable task of modern materials science branches related to biomedical engineering. The considerable compatibility with multiple cell lines and capability to form unaligned nanofibrous frameworks help reproduce the properties of natural extracellular matrix and ensure scaffold applications as cell carriers promoting substantial cell adhesion, growth, and proliferation. In this paper, we are focusing on the structural features of cellulose itself and electrospun cellulosic fibers, including fiber diameter, spacing, and alignment responsible for facilitated cell capture. The study emphasizes the role of the most frequently discussed cellulose derivatives (cellulose acetate, carboxymethylcellulose, hydroxypropyl cellulose, etc.) and composites in scaffolding and cell culturing. The key issues of the electrospinning technique in scaffold design and insufficient micromechanics assessment are discussed. Based on recent studies aiming at the fabrication of artificial 2D and 3D nanofiber matrices, the current research provides the applicability assessment of the scaffolds toward osteoblasts (hFOB line), fibroblastic (NIH/3T3, HDF, HFF-1, L929 lines), endothelial (HUVEC line), and several other cell types. Furthermore, a critical aspect of cell adhesion through the adsorption of proteins on the surfaces is touched upon.

Spatioselective surface chemistry for the production of functional and chemically anisotropic nanocellulose colloids

Maximizing the benefits of nanomaterials from biomass requires unique considerations associated with their native chemical and physical structure. Both cellulose nanofibrils and nanocrystals are extracted from cellulose fibers via a top-down approach and have significantly advanced materials chemistry and set new benchmarks in the last decade. One major challenge has been to prepare defined and selectively modified nanocelluloses, which would, e.g., allow optimal particle interactions and thereby further improve the properties of processed materials. At the molecular and crystallite level, the surface of nanocelluloses offers an alternating chemical structure and functional groups of different reactivity, enabling straightforward avenues towards chemically anisotropic and molecularly patterned nanoparticles via spatioselective chemical modification. In this review, we will explain the influence and role of the multiscale hierarchy of cellulose fibers in chemical modifications, and critically discuss recent advances in selective surface chemistry of nanocelluloses. Finally, we will demonstrate the potential of those chemically anisotropic nanocelluloses in materials science and discuss challenges and opportunities in this field.

Aqueous synthesis of highly functional, hydrophobic, and chemically recyclable cellulose nanomaterials through oxime ligation

Cellulose nanofibril (CNF) materials are candidates for the sustainable development of high mechanical performance nanomaterials. Due to inherent hydrophilicity and limited functionality range, most applications require chemical modification of CNF. However, targeted transformations directly on CNF are cumbersome due to the propensity of CNF to aggregate in non-aqueous solvents at high concentrations, complicating the choice of suitable reagents and requiring tedious separations of the final product. This work addresses this challenge by developing a general, entirely water-based, and experimentally simple methodology for functionalizing CNF, providing aliphatic, allylic, propargylic, azobenzylic, and substituted benzylic functional groups. The first step is NaIO₄ oxidation to dialdehyde-CNF in the wet cake state, followed by oxime ligation with O-substituted hydroxylamines. The increased hydrolytic stability of oximes removes the need for reductive stabilization as often required for the analogous imines where aldehyde groups react with amines in water. Overall, the process provides a tailored degree of nanofibril functionalization (2-4.5 mmol/g) with the possible reversible detachment of the functionality under mildly acidic conditions, resulting in the reformation of dialdehyde CNF. The modified CNF materials were assessed for potential applications in green electronics and triboelectric nanogenerators.

Assessment of Electrothermal Pretreatment of Rambutan (Nephelium lappaceum L.) Peels for Producing Cellulose Fibers

Agroindustrial wastes are renewable sources and the most promising sustainable alternative to lignocellulosic biomass for cellulose production. This study assessed the electrothermal pretreatment of rambutan peel (RP) for producing cellulose fibers. The pretreatment was carried out by Ohmic heating at a solid-to-liquid ratio of 1:10 (w/v) in a water/ethanol (1:1, v/v) mixture as the electrical transmission medium at 60 ± 1 °C for different holding times (15, 30, and 60 min). Ohmic heating did not significantly influence the total fiber yield for the various holding times. However, the compositions of the samples in terms of extractives, lignin, hemicellulose, and α-cellulose content were significantly influenced. In addition, the electrothermal pretreatment method reduced the bleaching time of RP by 25%. The pretreated fibers were thermally stable up to 240 °C. Ohmic heating pretreatment times of 15 and 30 min were found most promising, reducing the required bleaching chemicals and increasing the α-cellulose yield. The pretreated bleached cellulose fibers had similar properties to nontreated bleached fibers and could be efficiently processed into stable gels of strong shear-thinning behavior with potential application as rheology modifiers in food products. Our results demonstrate that rambutan peel could serve as a promising sustainable alternative to woody biomass for cellulose production. Ohmic heating meets the requirements for industrial applications as it is eco-friendly, improves the efficiency and energy consumption in fiber processing, and could as well be included in the processing of similar food wastes.

Raman imaging: An indispensable technique to comprehend the functionalization of lignocellulosic material

With the increasing demands on sustainability in the material science and engineering landscape, the use of wood, a renewable and biodegradable material, for new material development has drawn increasing attentions in the materials science community. To promote the development of new wood-based materials, it is critical to understanding not only wood's hierarchical structure from molecule to macroscale level, but also the interactions of wood with other materials and chemicals upon modification and functionalization. In this review, we discuss the recent advances in the Raman imaging technique, a new approach that combines spectroscopy and microscopy, in wood characterization and structural evolution monitoring during functionalization. We introduce the principles of Raman spectroscopy and common Raman instrumentations. We survey the use of traditional Raman spectroscopy for lignocellulosic material characterizations including cellulose crystallinity determination, holocellulose discrimination, and lignin substructure evaluation. We briefly review the recent studies on wood property enhancement and functional wood-based material development through wood modification including thermal treatment, acetylation, furfurylation, methacrylation, delignification. Subsequently, we highlight the use of the Raman imaging for visualization, spatial and temporal distribution of wood cell wall structure, as well as the microstructure evolution upon functionalization. Finally, we discuss the future prospects of the field.

Scalable Fabrication of Highly Breathable Cotton Textiles with Stable Fluorescent, Antibacterial, Hydrophobic, and UV-Blocking Performance

Multifunctional cotton textiles that are highly breathable are desirable in a broad range of applications. However, it is still a big challenge to scale up production of such multifunctional cotton textiles. Herein, we developed a simple, scalable, and benign strategy to fabricate highly breathable multifunctional cotton textiles via mild surface modification. The 1,4-dihydropyridine (DHP) ring and gentamycin sulfate (GS) molecules were firmly attached to the cellulose chains under room temperature via a one-pot method. The resulting modified cotton textile showed integrated performances with bright fluorescence, good antibacterial behavior, hydrophobic behavior (contact angle of 134°), and UV-blocking (UPF being up to 69.2), which are very stable toward washing and various solvents. There is no obvious change in the whiteness, thermal stability, and mechanical performance of cotton fabrics after the surface modification. What's more, the air permeability of the modified cotton fabric was up to 31.3 (cm3/cm2)/s. This study not only focuses on the materials design and large-scale fabrication but also provides stable and multifunctional cotton textiles with broad application prospects for many fields.

Highly regioselective surface acetylation of cellulose and shaped cellulose constructs in the gas-phase

Gas-phase acylation is an attractive and sustainable method for modifying the surface properties of cellulosics. However, little is known concerning the regioselectivity of the chemistry, i.e., which cellulose hydroxyls are preferentially acylated and if acylation can be restricted to the surface, preserving crystallinities/morphologies. Consequently, we reexplore simple gas-phase acetylation of modern-day cellulosic building blocks - cellulose nanocrystals, pulps, dry-jet wet spun (regenerated cellulose) fibres and a nanocellulose-based aerogel. Using advanced analytics, we show that the gas-phase acetylation is highly regioselective for the C6-OH, a finding also supported by DFT-based transition-state modelling on a crystalloid surface. This contrasts with acid- and base-catalysed liquid-phase acetylation methods, highlighting that gas-phase chemistry is much more controllable, yet with similar kinetics, to the uncatalyzed liquid-phase reactions. Furthermore, this method preserves both the native (or regenerated) crystalline structure of the cellulose and the supramolecular morphology of even delicate cellulosic constructs (nanocellulose aerogel exhibiting chiral cholesteric liquid crystalline phases). Due to the soft nature of this chemistry and an ability to finely control the kinetics, yielding highly regioselective low degree of substitution products, we are convinced this method will facilitate the rapid adoption of precisely tailored and biodegradable cellulosic materials.

Nanoscale Mechanism of Moisture-Induced Swelling in Wood Microfibril Bundles

Understanding nanoscale moisture interactions is fundamental to most applications of wood, including cellulosic nanomaterials with tailored properties. By combining X-ray scattering experiments with molecular simulations and taking advantage of computed scattering, we studied the moisture-induced changes in cellulose microfibril bundles of softwood secondary cell walls. Our models reproduced the most important experimentally observed changes in diffraction peak locations and widths and gave new insights into their interpretation. We found that changes in the packing of microfibrils dominate at moisture contents above 10-15%, whereas deformations in cellulose crystallites take place closer to the dry state. Fibrillar aggregation is a significant source of drying-related changes in the interior of the microfibrils. Our results corroborate the fundamental role of nanoscale phenomena in the swelling behavior and properties of wood-based materials and promote their utilization in nanomaterials development. Simulation-assisted scattering analysis proved an efficient tool for advancing the nanoscale characterization of cellulosic materials.

Cellulose Nanocrystal Aqueous Colloidal Suspensions: Evidence of Density Inversion at the Isotropic-Liquid Crystal Phase Transition

The colloidal suspensions of aqueous cellulose nanocrystals (CNCs) are known to form liquid crystalline (LC) systems above certain critical concentrations. From an isotropic phase, tactoid formation, growth, and sedimentation have been determined as the genesis of a high-density cholesteric phase, which, after drying, originates solid iridescent films. Herein, the coexistence of a liquid crystal upper phase and an isotropic bottom phase in CNC aqueous suspensions at the isotropic-nematic phase separation is reported. Furthermore, isotropic spindle-like domains are observed in the low-density LC phase and high-density LC phases are also prepared. The CNCs isolated from the low- and high-density LC phases are found to have similar average lengths, diameters, and surface charges. The existence of an LC low-density phase is explained by the presence of air dissolved in the water present within the CNCs. The air dissolves out when the water solidifies into ice and remains within the CNCs. The self-adjustment of the cellulose chain conformation enables the entrapment of air within the CNCs and CNC buoyancy in aqueous suspensions.

Superstable Wet Foams and Lightweight Solid Composites from Nanocellulose and Hydrophobic Particles

Colloids are suitable options to replace surfactants in the formation of multiphase systems while simultaneously achieving performance benefits. We introduce synergetic combination of colloids for the interfacial stabilization of complex fluids that can be converted into lightweight materials. The strong interactions between high aspect ratio and hydrophilic fibrillated cellulose (CNF) with low aspect ratio hydrophobic particles afford superstable Pickering foams. The foams were used as a scaffolding precursor of porous, solid materials. Compared to foams stabilized by the hydrophobic particles alone, the introduction of CNF significantly increased the foamability (by up to 350%) and foam lifetime. These effects are ascribed to the fibrillar network formed by CNF. The CNF solid fraction regulated the interparticle interactions in the wet foam, delaying or preventing drainage, coarsening, and bubble coalescence. Upon drying, such a complex fluid was transformed into lightweight and strong architectures, which displayed properties that depended on the surface energy of the CNF precursor. We show that CNF combined with hydrophobic particles universally forms superstable complex fluids that can be used as a processing route to synthesize strong composites and lightweight structures.

Sustainable Superhydrophobic Surface with Tunable Nanoscale Hydrophilicity for Water Harvesting

Fog collection can be a sustainable solution to water scarcity in many regions around the world. Recently, great efforts have been undertaken to develop low-cost and highly efficient water collectors to address water shortages, especially in arid regions. However, the design of a scalable water harvesting surface remains elusive to the trade-off between water deposition and transport. Herein, we developed a hydrophilic/superhydrophobic surface using a "one-pot" facile approach to enable an efficient water deposition and transport process. Preferential exposure of hydrophilic cellulose nanocrystal outer surface could be used to accelerate droplet deposition, coupled with wax microspheres with distinct wetting features for the manipulation of the droplet mobility. Appropriate tuning of the wetting characteristics of the surfaces, optimizing the hydrophobicity and density of the water affinity nanodomains allowed us to enhance the water deposition rate without the sacrifice of water transport. An optimal hydrophilic/superhydrophobic topography through the control of nanoscale hydrophilic and hydrophobic domains yielded a water harvesting flux of 3.402 L/m 2 /h for a plate and 5.02 L/m 2 /h for a mesh. This strategy of decorating a superhydrophobic surface with moderately hydrophilic nanodomains allows the manipulation of droplet nucleation and removal to enhance the water collection efficiency.

Deconstruction and Reassembly of Renewable Polymers and Biocolloids into Next Generation Structured Materials

This review considers the most recent developments in supramolecular and supraparticle structures obtained from natural, renewable biopolymers as well as their disassembly and reassembly into engineered materials. We introduce the main interactions that control bottom-up synthesis and top-down design at different length scales, highlighting the promise of natural biopolymers and associated building blocks. The latter have become main actors in the recent surge of the scientific and patent literature related to the subject. Such developments make prominent use of multicomponent and hierarchical polymeric assemblies and structures that contain polysaccharides (cellulose, chitin, and others), polyphenols (lignins, tannins), and proteins (soy, whey, silk, and other proteins). We offer a comprehensive discussion about the interactions that exist in their native architectures (including multicomponent and composite forms), the chemical modification of polysaccharides and their deconstruction into high axial aspect nanofibers and nanorods. We reflect on the availability and suitability of the latter types of building blocks to enable superstructures and colloidal associations. As far as processing, we describe the most relevant transitions, from the solution to the gel state and the routes that can be used to arrive to consolidated materials with prescribed properties. We highlight the implementation of supramolecular and superstructures in different technological fields that exploit the synergies exhibited by renewable polymers and biocolloids integrated in structured materials.

Stabilization of radical active species in a MOF nanospace to exploit unique reaction pathways

We synthesized a metal-organic framework (MOF) using a ligand bearing haloalkoxy chains as a radical precursor. The radicals generated in the MOF upon photoirradiation were stable even at 250 K or under an O₂ atmosphere, despite radicals generated from the ligand decomposing at 200 K; thus, the regular arrangement of radicals effectively stabilized them. Moreover, a unique photoproduct was obtained only in the MOF, indicating that the confinement effect in the nanospace enabled a specific reaction that did not occur in the bulk state. We propose a new platform for exploring chemical reactions and materials based on reactive species.

Recent progress in cellulose-based electrospun nanofibers as multifunctional materials

Cellulose, the most abundant natural polymer, has good biocompatibility, biodegradability, and non-toxicity, which make it and its derivatives promising candidates for the fabrication of multifunctional materials, while maintaining sustainability and environmental friendliness. The combination of electrospinning technology and cellulose (and its derivatives) provides a feasible approach to produce nanostructured porous materials with promising functionalities, flexibility, renewability and biodegradability. At the same time, it enables value-added applications of cellulose and its derivatives that are derived from nature or even biomass waste. This review summarizes and discusses the latest progress in cellulose-based electrospun nanofibers, including their construction methods and conditions, various available raw materials, and applications in multiple areas (water treatment, biomaterials, sensors, electro-conductive materials, active packaging, and so on), which are followed by the conclusion and prospects associated with future opportunities and challenges in this active research area.

Assembling Native Elementary Cellulose Nanofibrils via a Reversible and Regioselective Surface Functionalization

Selective surface modification of biobased fibers affords effective individualization and functionalization into nanomaterials, as exemplified by the TEMPO-mediated oxidation. However, such a route leads to changes of the native surface chemistry, affecting interparticle interactions and limiting the development of potential supermaterials. Here we introduce a methodology to extract elementary cellulose fibrils by treatment of biomass with N-succinylimidazole, achieving regioselective surface modification of C6-OH, which can be reverted using mild post-treatments. No polymer degradation, cross-linking, nor changes in crystallinity occur under the mild processing conditions, yielding cellulose nanofibrils bearing carboxyl moieties, which can be removed by saponification. The latter offers a significant opportunity in the reconstitution of the chemical and structural interfaces associated with the native states. Consequently, 3D structuring of native elementary cellulose nanofibrils is made possible with the same supramolecular features as the biosynthesized fibers, which is required to unlock the full potential of cellulose as a sustainable building block.

Regioselective and water-assisted surface esterification of never-dried cellulose: nanofibers with adjustable surface energy

A new regioselective route is introduced for surface modification of biological colloids in the presence of water. Taking the case of cellulose nanofibers (CNFs), we demonstrate a site-specific (93% selective) reaction between the primary surface hydroxyl groups (C6-OH) of cellulose and acyl imidazoles. CNFs bearing C6-acetyl and C6-isobutyryl groups, with a degree of substitution of up to 1 mmol g-1 are obtained upon surface esterification, affording CNFs of adjustable surface energy. The morphological and structural features of the nanofibers remain largely unaffected, but the regioselective surface reactions enable tailoring of their interfacial interactions, as demonstrated in oil/water Pickering emulsions. Our method precludes the need for drying or exchange with organic solvents for surface esterification, otherwise needed in the synthesis of esterified colloids and polysaccharides. Moreover, the method is well suited for application at high-solid content, opening the possibility for implementation in reactive extrusion and compounding. The proposed acylation is introduced as a sustainable approach that benefits from the presence of water and affords a high chemical substitution selectivity.