Polarity governs atomic interaction through two-dimensional materials

Establishing Pinhole Deposition Mode of Zn via Scalable Monolayer Graphene Film

The uneven texture evolution of Zn during electrodeposition would adversely impact upon the lifespan of aqueous Zn metal batteries. To address this issue, tremendous endeavors are made to induce Zn(002) orientational deposition employing graphene and its derivatives. Nevertheless, the effect of prototype graphene film over Zn deposition behavior has garnered less attention. Here, it is attempted to solve such a puzzle via utilizing transferred high-quality graphene film with controllable layer numbers in a scalable manner on a Zn foil. The multilayer graphene fails to facilitate a Zn epitaxial deposition, whereas the monolayer film with slight breakages steers a unique pinhole deposition mode. In-depth electrochemical measurements and theoretical simulations discover that the transferred graphene film not only acts as an armor to inhibit side reactions but also serves as a buffer layer to homogenize initial Zn nucleation and decrease Zn migration barrier, accordingly enabling a smooth deposition layer with closely stacked polycrystalline domains. As a result, both assembled symmetric and full cells manage to deliver satisfactory electrochemical performances. This study proposes a concept of "pinhole deposition" to dictate Zn electrodeposition and broadens the horizons of graphene-modified Zn anodes.

Unraveling the Heterointegration of 3D Semiconductors on Graphene by Anchor Point Nucleation

The heterointegration of graphene with semiconductor materials and the development of graphene-based hybrid functional devices are heavily bound to the control of surface energy. Although remote epitaxy offers one of the most appealing techniques for implementing 3D/2D heterostructures, it is only suitable for polar materials and is hugely dependent on the graphene interface quality. Here, the growth of defect-free single-crystalline germanium (Ge) layers on a graphene-coated Ge substrate is demonstrated by introducing a new approach named anchor point nucleation (APN). This powerful approach based on graphene surface engineering enables the growth of semiconductors on any type of substrate covered by graphene. Through plasma treatment, defects such as dangling bonds and nanoholes, which act as preferential nucleation sites, are introduced in the graphene layer. These experimental data unravel the nature of those defects, their role in nucleation, and the mechanisms governing this technique. Additionally, high-resolution transmission microscopy combined with geometrical phase analysis established that the as-grown layers are perfectly single-crystalline, stress-free, and oriented by the substrate underneath the engineered graphene layer. These findings provide new insights into graphene engineering by plasma and open up a universal pathway for the heterointegration of high-quality 3D semiconductors on graphene for disruptive hybrid devices.

Quasi van der Waals Epitaxy of Single Crystalline GaN on Amorphous SiO2/Si(100) for Monolithic Optoelectronic Integration

The realization of high quality (0001) GaN on Si(100) is paramount importance for the monolithic integration of Si-based integrated circuits and GaN-enabled optoelectronic devices. Nevertheless, thorny issues including large thermal mismatch and distinct crystal symmetries typically bring about uncontrollable polycrystalline GaN formation with considerable surface roughness on standard Si(100). Here a breakthrough of high-quality single-crystalline GaN film on polycrystalline SiO2/Si(100) is presented by quasi van der Waals epitaxy and fabricate the monolithically integrated photonic chips. The in-plane orientation of epilayer is aligned throughout a slip and rotation of high density AlN nuclei due to weak interfacial forces, while the out-of-plane orientation of GaN can be guided by multi-step growth on transfer-free graphene. For the first time, the monolithic integration of light-emitting diode (LED) and photodetector (PD) devices are accomplished on CMOS-compatible SiO2/Si(100). Remarkably, the self-powered PD affords a rapid response below 250 µs under adjacent LED radiation, demonstrating the responsivity and detectivity of 2.01 × 105 A/W and 4.64 × 1013 Jones, respectively. This work breaks a bottleneck of synthesizing large area single-crystal GaN on Si(100), which is anticipated to motivate the disruptive developments in Si-integrated optoelectronic devices.

Remote Epitaxy: Fundamentals, Challenges, and Opportunities

Advanced heterogeneous integration technologies are pivotal for next-generation electronics. Single-crystalline materials are one of the key building blocks for heterogeneous integration, although it is challenging to produce and integrate these materials. Remote epitaxy is recently introduced as a solution for growing single-crystalline thin films that can be exfoliated from host wafers and then transferred onto foreign platforms. This technology has quickly gained attention, as it can be applied to a wide variety of materials and can realize new functionalities and novel application platforms. Nevertheless, remote epitaxy is a delicate process, and thus, successful execution of remote epitaxy is often challenging. Here, we elucidate the mechanisms of remote epitaxy, summarize recent breakthroughs, and discuss the challenges and solutions in the remote epitaxy of various material systems. We also provide a vision for the future of remote epitaxy for studying fundamental materials science, as well as for functional applications.

Substrate effect on charging of electrified graphene/water interfaces

Graphene, a transparent two-dimensional (2D) conductive electrode, has brought extensive new perspectives and prospects to electrochemical systems, such as chemical sensors, energy storage, and energy conversion devices. In many of these applications, graphene, supported on a substrate, is in contact with an aqueous solution. An increasing number of studies indicate that the substrate, rather than graphene, determines the organization of water in contact with graphene, i.e., the electric double layer (EDL) structure near the electrified graphene, and the wetting behavior of the graphene: the graphene sheet is transparent in terms of its supporting substrate. By applying surface-specific heterodyne-detected sum-frequency generation (HD-SFG) spectroscopy to the silicon dioxide (SiO2)-supported graphene electrode/aqueous electrolyte interface and comparing the data with those for the calcium fluoride (CaF2)-supported graphene [Y. Wang et al., Angew. Chem., Int. Ed., 2023, 62, e202216604], we discuss the impact of the different substrates on the charging of both the graphene and the substrate upon applying potentials. The SiO2-supported graphene shows pseudocapacitive behavior, consistent with the CaF2-supported graphene case, although the surface charges on SiO2 and CaF2 differ substantially. The SiO2 surface is already negatively charged at +0.57 V (vs. Pd/H2), and the negative surface charge is doubled when negative potentials are applied, in contrast with the CaF2 case, where the positive charge is reduced when negative potentials are applied. Interestingly, the charging of the graphene sheet is almost identical between the negatively charged SiO2 surface and positively charged CaF2 surface, demonstrating that the graphene charging is decoupled from the charging of the substrates.

A 2D ferroelectric vortex pattern in twisted BaTiO3 freestanding layers

The wealth of complex polar topologies1-10 recently found in nanoscale ferroelectrics results from a delicate balance between the intrinsic tendency of the materials to develop a homogeneous polarization and the electric and mechanical boundary conditions imposed on them. Ferroelectric-dielectric interfaces are model systems in which polarization curling originates from open circuit-like electric boundary conditions, to avoid the build-up of polarization charges through the formation of flux-closure11-14 domains that evolve into vortex-like structures at the nanoscale15-17 level. Although ferroelectricity is known to couple strongly with strain (both homogeneous18 and inhomogeneous19,20), the effect of mechanical constraints21 on thin-film nanoscale ferroelectrics has been comparatively less explored because of the relative paucity of strain patterns that can be implemented experimentally. Here we show that the stacking of freestanding ferroelectric perovskite layers with controlled twist angles provides an opportunity to tailor these topological nanostructures in a way determined by the lateral strain modulation associated with the twisting. Furthermore, we find that a peculiar pattern of polarization vortices and antivortices emerges from the flexoelectric coupling of polarization to strain gradients. This finding provides opportunities to create two-dimensional high-density vortex crystals that would enable us to explore previously unknown physical effects and functionalities.

Pulsed-Mode Metalorganic Vapor-Phase Epitaxy of GaN on Graphene-Coated c-Sapphire for Freestanding GaN Thin Films

We report the growth of high-quality GaN epitaxial thin films on graphene-coated c-sapphire substrates using pulsed-mode metalorganic vapor-phase epitaxy, together with the fabrication of freestanding GaN films by simple mechanical exfoliation for transferable light-emitting diodes (LEDs). High-quality GaN films grown on the graphene-coated sapphire substrates were easily lifted off by using thermal release tape and transferred onto foreign substrates. Furthermore, we revealed that the pulsed operation of ammonia flow during GaN growth was a critical factor for the fabrication of high-quality freestanding GaN films. These films, exhibiting excellent single crystallinity, were utilized to fabricate transferable GaN LEDs by heteroepitaxially growing InxGa1-xN/GaN multiple quantum wells and a p-GaN layer on the GaN films, showing their potential application in advanced optoelectronic devices.

2D-Material-Assisted GaN Growth on GaN Template by MOCVD and Its Exfoliation Strategy

The production of freestanding membranes using two-dimensional (2D) materials often involves techniques such as van der Waals (vdW) epitaxy, quasi-vdW epitaxy, and remote epitaxy. However, a challenge arises when attempting to manufacture freestanding GaN by using these 2D-material-assisted growth techniques. The issue lies in securing stability, as high-temperature growth conditions under metal-organic chemical vapor deposition (MOCVD) can cause damage to the 2D materials due to GaN decomposition of the substrate. Even when GaN is successfully grown using this method, damage to the 2D material leads to direct bonding with the substrate, making the exfoliation of the grown GaN nearly impossible. This study introduces an approach for GaN growth and exfoliation on 2D material/GaN templates. First, graphene and hexagonal boron nitride (h-BN) were transferred onto the GaN template, creating stable conditions under high temperatures and various gases in MOCVD. GaN was grown in a two-step process at 750 and 900 °C, ensuring exfoliation in cases where the 2D materials remained intact. Essentially, while it is challenging to grow GaN on 2D material/GaN using only MOCVD, this study demonstrates that with effective protection of the 2D material, the grown GaN can endure high temperatures and still be exfoliated. Furthermore, these results support that vdW epitaxy and remote epitaxy principle are not only possible with specific equipment but also applicable generally.

Nucleation and Growth of GaAs on a Carbon Release Layer by Halide Vapor Phase Epitaxy

We couple halide vapor phase epitaxy (HVPE) growth of III-V materials with liftoff from an ultrathin carbon release layer to address two significant cost components in III-V device - epitaxial growth and substrate reusability. We investigate nucleation and growth of GaAs layers by HVPE on a thin amorphous carbon layer that can be mechanically exfoliated, leaving the substrate available for reuse. We study nucleation as a function of carbon layer thickness and growth rate and find island-like nucleation. We then study various GaAs growth conditions, including V/III ratio, growth temperature, and growth rate in an effort to minimize film roughness. High growth rates and thicker films lead to drastically smoother surfaces with reduced threading dislocation density. Finally, we grow an initial photovoltaic device on a carbon release layer that has an efficiency of 7.2%. The findings of this work show that HVPE growth is compatible with a carbon release layer and presents a path toward lowering the cost of photovoltaics with high throughput growth and substrate reuse.

Hexagonal Boron Nitride as an Intermediate Layer for Gallium Nitride Epitaxial Growth in Near-Ultraviolet Light-Emitting Diodes

We introduce the development of gallium nitride (GaN) layers by employing graphene and hexagonal boron nitride (h-BN) as intermediary substrates. This study demonstrated the successful growth of GaN with a uniformly smooth surface morphology on h-BN. In order to evaluate the crystallinity of GaN grown on h-BN, a comparison was conducted with GaN grown on a sapphire substrate. Photoluminescence spectroscopy and X-ray diffraction confirmed that the crystallinity of GaN deposited on h-BN was inferior to that of GaN grown on conventional GaN. To validate the practical applicability of the GaN layer grown on h-BN, we subsequently grew an NUV-LED structure and fabricated a device that operated well in optoelectrical performance experiments. Our findings validate the potential usefulness of h-BN to be a substrate in the direct growth of a GaN layer.

Exceptional Thermochemical Stability of Graphene on N-Polar GaN for Remote Epitaxy

In this study, we investigate the thermochemical stability of graphene on the GaN substrate for metal-organic chemical vapor deposition (MOCVD)-based remote epitaxy. Despite excellent physical properties of GaN, making it a compelling choice for high-performance electronic and light-emitting device applications, the challenge of thermochemical decomposition of graphene on a GaN substrate at high temperatures has obstructed the achievement of remote homoepitaxy via MOCVD. Our research uncovers an unexpected stability of graphene on N-polar GaN, thereby enabling the MOCVD-based remote homoepitaxy of N-polar GaN. Our comparative analysis of N- and Ga-polar GaN substrates reveals markedly different outcomes: while a graphene/N-polar GaN substrate produces releasable microcrystals (μCs), a graphene/Ga-polar GaN substrate yields nonreleasable thin films. We attribute this discrepancy to the polarity-dependent thermochemical stability of graphene on the GaN substrate and its subsequent reaction with hydrogen. Evidence obtained from Raman spectroscopy, electron microscopic analyses, and overlayer delamination points to a pronounced thermochemical stability of graphene on N-polar GaN during MOCVD-based remote homoepitaxy. Molecular dynamics simulations, corroborated by experimental data, further substantiate that the thermochemical stability of graphene is reliant on the polarity of GaN, due to different reactions with hydrogen at high temperatures. Based on the N-polar remote homoepitaxy of μCs, the practical application of our findings was demonstrated in fabrication of flexible light-emitting diodes composed of p-n junction μCs with InGaN heterostructures.

Remote epitaxial interaction through graphene

The concept of remote epitaxy involves a two-dimensional van der Waals layer covering the substrate surface, which still enable adatoms to follow the atomic motif of the underlying substrate. The mode of growth must be carefully defined as defects, e.g., pinholes, in two-dimensional materials can allow direct epitaxy from the substrate, which, in combination with lateral epitaxial overgrowth, could also form an epilayer. Here, we show several unique cases that can only be observed for remote epitaxy, distinguishable from other two-dimensional material-based epitaxy mechanisms. We first grow BaTiO3 on patterned graphene to establish a condition for minimizing epitaxial lateral overgrowth. By observing entire nanometer-scale nuclei grown aligned to the substrate on pinhole-free graphene confirmed by high-resolution scanning transmission electron microscopy, we visually confirm that remote epitaxy is operative at the atomic scale. Macroscopically, we also show variations in the density of GaN microcrystal arrays that depend on the ionicity of substrates and the number of graphene layers.

3He spin-echo scattering indicates hindered diffusion of isolated water molecules on graphene-covered Ir(111)

The dynamics of water diffusion on carbon surfaces are of interest in fields as diverse as furthering the use of graphene as an industrial-coating technology and understanding the catalytic role of carbon-based dust grains in the interstellar medium. The early stages of water-ice growth and the mobility of water adsorbates are inherently dependent on the microscopic mechanisms that facilitate water diffusion. Here, we use 3He spin-echo quasi-inelastic scattering to probe the microscopic mechanisms responsible for the diffusion of isolated water molecules on graphene-covered and bare Ir(111). The scattering of He atoms provides a non-invasive and highly surface-sensitive means to measure the rate at which absorbates move around on a substrate at very low coverage. Our results provide an approximate upper limit on the diffusion coefficient for water molecules on GrIr(111) of < 10 - 12  m2/s, an order of magnitude lower than the coefficient that describes the diffusion of water molecules on the bare Ir(111) surface. We attribute the hindered diffusion of water molecules on the GrIr(111) surface to water trapping at specific areas of the corrugated moiré superstructure. Lower mobility of water molecules on a surface is expected to lead to a lower ice nucleation rate and may enhance the macroscopic anti-icing properties of a surface.

Unveiling the mechanism of remote epitaxy of crystalline semiconductors on 2D materials-coated substrates

Remote epitaxy has opened novel opportunities for advanced manufacturing and heterogeneous integration of two-dimensional (2D) materials and conventional (3D) materials. The lattice transparency as the fundamental principle of remote epitaxy has been studied and challenged by recent observations defying the concept. Understanding remote epitaxy requires an integrated approach of theoretical modeling and experimental validation at multi-scales because the phenomenon includes remote interactions of atoms across an atomically thin material and a few van der Waals gaps. The roles of atomically thin 2D material for the nucleation and growth of a 3D material have not been integrated into a framework of remote epitaxy research. Here, we summarize studies of remote epitaxy mechanisms with a comparison to other epitaxy techniques. In the end, we suggest the crucial topics of remote epitaxy research for basic science and applications.

Lattice modulation strategies for 2D material assisted epitaxial growth

As an emerging single crystals growth technique, the 2D-material-assisted epitaxy shows excellent advantages in flexible and transferable structure fabrication, dissimilar materials integration, and matter assembly, which offers opportunities for novel optoelectronics and electronics development and opens a pathway for the next-generation integrated system fabrication. Studying and understanding the lattice modulation mechanism in 2D-material-assisted epitaxy could greatly benefit its practical application and further development. In this review, we overview the tremendous experimental and theoretical findings in varied 2D-material-assisted epitaxy. The lattice guidance mechanism and corresponding epitaxial relationship construction strategy in remote epitaxy, van der Waals epitaxy, and quasi van der Waals epitaxy are discussed, respectively. Besides, the possible application scenarios and future development directions of 2D-material-assisted epitaxy are also given. We believe the discussions and perspectives exhibited here could help to provide insight into the essence of the 2D-material-assisted epitaxy and motivate novel structure design and offer solutions to heterogeneous integration via the 2D-material-assisted epitaxy method.

Determination of the preferred epitaxy for III-nitride semiconductors on wet-transferred graphene

Transferred graphene provides a promising III-nitride semiconductor epitaxial platform for fabricating multifunctional devices beyond the limitation of conventional substrates. Despite its tremendous fundamental and technological importance, it remains an open question on which kind of epitaxy is preferred for single-crystal III-nitrides. Popular answers to this include the remote epitaxy where the III-nitride/graphene interface is coupled by nonchemical bonds, and the quasi-van der Waals epitaxy (quasi-vdWe) where the interface is mainly coupled by covalent bonds. Here, we show the preferred one on wet-transferred graphene is quasi-vdWe. Using aluminum nitride (AlN), a strong polar III-nitride, as an example, we demonstrate that the remote interaction from the graphene/AlN template can inhibit out-of-plane lattice inversion other than in-plane lattice twist of the nuclei, resulting in a polycrystalline AlN film. In contrast, quasi-vdWe always leads to single-crystal film. By answering this long-standing controversy, this work could facilitate the development of III-nitride semiconductor devices on two-dimensional materials such as graphene.

Borazine Promoted Growth of Highly Oriented Thin Films

We report on a phenomenon, where thin films sputter-deposited on single-crystalline Al₂O₃(0001) substrates exposed to borazine─a precursor commonly used for the synthesis of hexagonal boron nitride layers─are more highly oriented than those grown on bare Al₂O₃(0001) under the same conditions. We observed this phenomenon in face-centered cubic Pd, body-centered cubic Mo, and trigonal Ta₂C thin films grown on Al₂O₃(0001). Interestingly, intermittent exposure to borazine during the growth of Ta₂C thin films on Ta₂C yields better crystallinity than direct deposition of monolithic Ta₂C. We attribute these rather unusual results to a combination of both enhanced adatom mobilities on, and epitaxial registry with, surfaces exposed to borazine during the deposition. We expect that our approach can potentially help improve the crystalline quality of thin films deposited on a variety of substrates.

High-throughput manufacturing of epitaxial membranes from a single wafer by 2D materials-based layer transfer process

Layer transfer techniques have been extensively explored for semiconductor device fabrication as a path to reduce costs and to form heterogeneously integrated devices. These techniques entail isolating epitaxial layers from an expensive donor wafer to form freestanding membranes. However, current layer transfer processes are still low-throughput and too expensive to be commercially suitable. Here we report a high-throughput layer transfer technique that can produce multiple compound semiconductor membranes from a single wafer. We directly grow two-dimensional (2D) materials on III-N and III-V substrates using epitaxy tools, which enables a scheme comprised of multiple alternating layers of 2D materials and epilayers that can be formed by a single growth run. Each epilayer in the multistack structure is then harvested by layer-by-layer mechanical exfoliation, producing multiple freestanding membranes from a single wafer without involving time-consuming processes such as sacrificial layer etching or wafer polishing. Moreover, atomic-precision exfoliation at the 2D interface allows for the recycling of the wafers for subsequent membrane production, with the potential for greatly reducing the manufacturing cost.

Principles for 2D-Material-Assisted Nitrides Epitaxial Growth

Beyond traditional heteroepitaxy, 2D-materials-assisted epitaxy opens opportunities to revolutionize future material integration methods. However, basic principles in 2D-material-assisted nitrides' epitaxy remain unclear, which impedes understanding the essence, thus hindering its progress. Here, the crystallographic information of nitrides/2D material interface is theoretically established, which is further confirmed experimentally. It is found that the atomic interaction at the nitrides/2D material interface is related to the nature of underlying substrates. For single-crystalline substrates, the heterointerface behaves like a covalent one and the epilayer inherits the substrate's lattice. Meanwhile, for amorphous substrates, the heterointerface tends to be a van der Waals one and strongly relies on the properties of 2D materials. Therefore, modulated by graphene, the nitrides' epilayer is polycrystalline. In contrast, single-crystalline GaN films are successfully achieved on WS₂ . These results provide a suitable growth-front construction strategy for high-quality 2D-material-assisted nitrides' epitaxy. It also opens a pathway toward various semiconductors heterointegration.

Applications of remote epitaxy and van der Waals epitaxy

Epitaxy technology produces high-quality material building blocks that underpin various fields of applications. However, fundamental limitations exist for conventional epitaxy, such as the lattice matching constraints that have greatly narrowed down the choices of available epitaxial material combinations. Recent emerging epitaxy techniques such as remote and van der Waals epitaxy have shown exciting perspectives to overcome these limitations and provide freestanding nanomembranes for massive novel applications. Here, we review the mechanism and fundamentals for van der Waals and remote epitaxy to produce freestanding nanomembranes. Key benefits that are exclusive to these two growth strategies are comprehensively summarized. A number of original applications have also been discussed, highlighting the advantages of these freestanding films-based designs. Finally, we discuss the current limitations with possible solutions and potential future directions towards nanomembranes-based advanced heterogeneous integration.

Understanding the 2D-material and substrate interaction during epitaxial growth towards successful remote epitaxy: a review

Remote epitaxy, which was discovered and reported in 2017, has seen a surge of interest in recent years. Although the technology seemed to be difficult to reproduce by other labs at first, remote epitaxy has come a long way and many groups are able to consistently reproduce the results with a wide range of material systems including III-V, III-N, wide band-gap semiconductors, complex-oxides, and even elementary semiconductors such as Ge. As with any nascent technology, there are critical parameters which must be carefully studied and understood to allow wide-spread adoption of the new technology. For remote epitaxy, the critical parameters are the (1) quality of two-dimensional (2D) materials, (2) transfer or growth of 2D materials on the substrate, (3) epitaxial growth method and condition. In this review, we will give an in-depth overview of the different types of 2D materials used for remote epitaxy reported thus far, and the importance of the growth and transfer method used for the 2D materials. Then, we will introduce the various growth methods for remote epitaxy and highlight the important points in growth condition for each growth method that enables successful epitaxial growth on 2D-coated single-crystalline substrates. We hope this review will give a focused overview of the 2D-material and substrate interaction at the sample preparation stage for remote epitaxy and during growth, which have not been covered in any other review to date.

Modulation of Remote Epitaxial Heterointerface by Graphene-Assisted Attenuative Charge Transfer

Remote epitaxy (RE), substrate polarity can "penetrate" two-dimensional materials (2DMs) and act on the epi-layer, showing a prospective universal growth strategy. However, essentially, the role that 2DMs plays in RE has not been deeply investigated so far. Here, the RE of single-crystal films on the weakest polarity/iconicity substrate is realized to reveal its essence physical properties. Graphene facilitates attenuative charge transfer (ACT) from a substrate to epi-layer to construct remote interactions. Interfacial atoms are assembled into "incommensurate" epitaxial relationships through graphene to reduce misfit dislocations in the epi-layer. Moreover, graphene reduces the atomic migration barrier, leading to a tendency toward a "layer-by-layer" growth mode. Such film growth mode is different with the conventional epitaxy (CE), and it is beneficial for the fast growth of epi-layers and the reduction of dislocations at coalescence boundaries. The insightful revelation of the role of graphene reveals the interface physics of RE and provides a more valuable guide to using 2DMs to expand three-dimensional materials (3DMs) for application in devices.

Van der Waals Layer Transfer of 2D Materials for Monolithic 3D Electronic System Integration: Review and Outlook

Two-dimensional materials (2DMs) have attracted a great deal of interest due to their immense potential for scientific breakthroughs and technological innovations. While some 2D transition metal dichalcogenides (TMDC) such as MoS₂ and WS₂ are considered as the ultimate channel materials in unltrascaled transistors as replacements for Si, there has also been increasing interest in the monolithic 3D integration of 2DMs on the Si CMOS platform or in flexible electronics as back-end-of-line transistors, memory devices/selectors, and sensors, taking advantage of 2DM properties such as a high current driving capability with low leakage current, nonvolatile switching characteristics, a large surface-to-volume ratio, and a tunable bandgap. However, the realization of both of these scenarios critically depends on the development of manufacturing-viable high-yield 2DM layers transfer from the growth substrate to the Si, since the growth of high-quality 2DM layers often requires a high-temperature growth process on template substrates. Motivated by this, extensive efforts have been made by the 2DM research community to develop various 2DM layer transfer methods, leveraging the van der Waals transfer capability of the layer-structured 2DMs. These efforts have led to a number of successful demonstrations of wafer-scale 2D TMDC layer transfer, while 2DM-enabled template growth/transfer of some functional bulk materials such as III-V, Ge, and AlN has also been demonstrated. This review surveys and compares different 2DM transfer methods developed recently, with a focus on large-area 2D TMDC film transfer along with an introduction of 2DM template-assisted van der Waals growth/transfer of non-2D thin films. We will also briefly present an outlook of our envisioned multifunctionalities in 3D integrated electronic systems enabled by monolithic 3D integration of 2DMs and III-V via van der Waals transfer and discuss possible technology options for overcoming remaining challenges.

New Approaches to Produce Large-Area Single Crystal Thin Films

Wafer-scale growth of single crystal thin films of metals, semiconductors, and insulators is crucial for manufacturing high-performance electronic and optical devices, but still challenging from both scientific and industrial perspectives. Recently, unconventional advanced synthetic approaches have been attempted and have made remarkable progress in diversifying the species of producible single crystal thin films. This review introduces several new synthetic approaches to produce large-area single crystal thin films of various materials according to the concepts and principles.

Superior Quality Low-Temperature Growth of Three-Dimensional Semiconductors Using Intermediate Two-Dimensional Layers

The low-temperature growth of materials that support high-performance devices is crucial for advanced semiconductor technologies such as integrated circuits built using monolithic three-dimensional (3D) integration and flexible electronics. However, low growth temperature prohibits sufficient atomic diffusion and directly leads to poor material quality, imposing severe challenges that limit device performance. Here, we demonstrate superior quality growth of 3D semiconductors at growth temperatures reduced by >200 °C by using two-dimensional (2D) materials as intermediate layers to optimize the potential energy barrier for adatom diffusion. We reveal the benefits of maintaining, but reducing, the potential field through the 2D layer, which coupled with the inert surface of the 2D material lowers the kinetic barriers, enabling long-distance atomic diffusion and enhanced material quality at lower growth temperatures. As model systems, GaN and ZnSe, grown using WSe₂ and graphene intermediate layers, exhibit larger grains, preferred orientation, reduced strain, and improved carrier mobility, all at temperatures lower by >200 °C compared to direct growth as characterized by diffraction, X-ray photoelectron spectroscopy, Raman, and Hall measurements. The realization of high-performance materials using 2D intermediate layers can enable transformative technologies under thermal budget restrictions, and the 2D/3D heterostructures could enable promising heterostructures for future device designs.

Controlling the Balance between Remote, Pinhole, and van der Waals Epitaxy of Heusler Films on Graphene/Sapphire

Remote epitaxy is promising for the synthesis of lattice-mismatched materials, exfoliation of membranes, and reuse of expensive substrates. However, clear experimental evidence of a remote mechanism remains elusive. Alternative mechanisms such as pinhole-seeded epitaxy or van der Waals epitaxy can often explain the resulting films. Here, we show that growth of the Heusler compound GdPtSb on clean graphene/sapphire produces a 30° rotated (R30) superstructure that cannot be explained by pinhole epitaxy. With decreasing temperature, the fraction of this R30 domain increases, compared to the direct epitaxial R0 domain, which can be explained by a competition between remote versus pinhole epitaxy. Careful graphene/substrate annealing and consideration of the relative lattice mismatches are required to obtain epitaxy to the underlying substrate across a series of other Heusler films, including LaPtSb and GdAuGe. The R30 superstructure provides a possible experimental fingerprint of remote epitaxy, since it is inconsistent with the leading alternative mechanisms.

Atomistic Mismatch Defines Energy-Structure Relationships during Oriented Attachment of Nanoparticles

Oriented attachment is an important crystal growth pathway in nature and has been extensively exploited to develop hierarchically structured crystalline materials. Atomistic mismatch in the crystal structure of two particles in the solvent-separated state creates forces that drive particle motions enabling solvent expulsion and coalescence, but the relative magnitudes of the energy barriers for approach, rotation, and translation are not well-known. Here we use classical molecular simulations to calculate the potential of mean force for these three different motions for basal surface encounters of gibbsite nanoplatelets separated by one water layer. In all cases, the highest energy barrier is associated with removing this last water layer to enable jump to contact, even when coaligned. Mutual rotation is more probable than sliding motion, which are both much more probable than jump to contact. This work provides the first comparison on an equal footing of the energy-structure relationships for multiple alignment paths between solvent-separated particles in bulk aqueous solution.

Multifunctional-high resolution imaging plate based on hydrophilic graphene for digital pathology

In the present study, we showed that hydrophilic graphene can serve as an ideal imaging plate for biological specimens. Graphene being a single-atom-thick semi-metal with low secondary electron emission, array tomography analysis of serial sections of biological specimens on a graphene substrate showed excellent image quality with improvedz-axis resolution, without including any conductive surface coatings. However, the hydrophobic nature of graphene makes the placement of biological specimens difficult; graphene functionalized with polydimethylsiloxane oligomer was fabricated using a simple soft lithography technique and then processed with oxygen plasma to provide hydrophilic graphene with minimal damage to graphene. High-quality scanning electron microscopy images of biological specimens free from charging effects or distortion were obtained, and the optical transparency of graphene enabled fluorescence imaging of the specimen; high-resolution correlated electron and light microscopy analysis of the specimen became possible with the hydrophilic graphene plate.

Graphene nanopattern as a universal epitaxy platform for single-crystal membrane production and defect reduction

Heterogeneous integration of single-crystal materials offers great opportunities for advanced device platforms and functional systems¹. Although substantial efforts have been made to co-integrate active device layers by heteroepitaxy, the mismatch in lattice polarity and lattice constants has been limiting the quality of the grown materials². Layer transfer methods as an alternative approach, on the other hand, suffer from the limited availability of transferrable materials and transfer-process-related obstacles³. Here, we introduce graphene nanopatterns as an advanced heterointegration platform that allows the creation of a broad spectrum of freestanding single-crystalline membranes with substantially reduced defects, ranging from non-polar materials to polar materials and from low-bandgap to high-bandgap semiconductors. Additionally, we unveil unique mechanisms to substantially reduce crystallographic defects such as misfit dislocations, threading dislocations and antiphase boundaries in lattice- and polarity-mismatched heteroepitaxial systems, owing to the flexibility and chemical inertness of graphene nanopatterns. More importantly, we develop a comprehensive mechanics theory to precisely guide cracks through the graphene layer, and demonstrate the successful exfoliation of any epitaxial overlayers grown on the graphene nanopatterns. Thus, this approach has the potential to revolutionize the heterogeneous integration of dissimilar materials by widening the choice of materials and offering flexibility in designing heterointegrated systems.

Continuous Single-Crystalline GaN Film Grown on WS2 -Glass Wafer

Use of 2D materials as buffer layers has prospects in nitride epitaxy on symmetry mismatched substrates. However, the control of lattice arrangement via 2D materials at the heterointerface presents certain challenges. In this study, the epitaxy of single-crystalline GaN film on WS₂ -glass wafer is successfully performed by using the strong polarity of WS₂ buffer layer and its perfectly matching lattice geometry with GaN. Furthermore, this study reveals that the first interfacial nitrogen layer plays a crucial role in the well-constructed interface by sharing electrons with both Ga and S atoms, enabling the single-crystalline stress-free GaN, as well as a violet light-emitting diode. This study paves a way for the heterogeneous integration of semiconductors and creates opportunities to break through the design and performance limitations, which are induced by substrate restriction, of the devices.

Defect seeded remote epitaxy of GaAs films on graphene

Remote epitaxy is an emerging materials synthesis technique which employs a 2D interface layer, often graphene, to enable the epitaxial deposition of low defect single crystal films while restricting bonding between the growth layer and the underlying substrate. This allows for the subsequent release of the epitaxial film for integration with other systems and reuse of growth substrates. This approach is applicable to material systems with an ionic component to their bonding, making it notably appealing for III-V alloys, which are a technologically important family of materials. Chemical vapour deposition growth of graphene and wet transfer to a III-V substrate with a polymer handle is a potentially scalable and low cost approach to producing the required growth surface for remote epitaxy of these materials, however, the presence of water promotes the formation of a III-V oxide layer, which degrades the quality of subsequently grown epitaxial films. This work demonstrates the use of an argon ion beam for the controlled introduction of defects in a monolayer graphene interface layer to enable the growth of a single crystal GaAs film by molecular beam epitaxy, despite the presence of a native oxide at the substrate/graphene interface. A hybrid mechanism of defect seeded lateral overgrowth with remote epitaxy contributing the coalescence of the film is indicated. The exfoliation of the GaAs films reveals the presence of defect seeded nucleation sites, highlighting the need to balance the benefits of defect seeding on crystal quality against the requirement for subsequent exfoliation of the film, for future large area development of this approach.

Mechanisms of Quasi van der Waals Epitaxy of Three-Dimensional Metallic Nanoislands on Suspended Two-Dimensional Materials

Understanding structure at the interface between two-dimensional (2D) materials and 3D metals is crucial for designing novel 2D/3D heterostructures and improving the performance of many 2D material devices. Here, we quantify and discuss the 2D/3D interface structure and the 3D morphology in several materials systems. We first deposit faceted Au nanoislands on graphene and transition metal dichalcogenides, using measurements of the equilibrium island shape to determine values for the 2D/Au interface energy and examining the role of surface reconstructions, chemical identity, and defects on the grown structures. We then deposit the technologically relevant metals Ti and Nb under conditions where kinetic rather than thermodynamic factors govern growth. We describe a transition from dendritic to faceted islands as a function of growth temperature and discuss the factors determining island shape in these materials systems. Finally, we show that suspended 2D materials enable the fabrication of a novel type of 3D/2D/3D heterostructure and discuss the growth mechanism. We suggest that emerging nanodevices will utilize versatile fabrication of 2D/3D heterostructures with well-characterized interfaces and morphologies.

Pinhole-seeded lateral epitaxy and exfoliation of GaSb films on graphene-terminated surfaces

Remote epitaxy is a promising approach for synthesizing exfoliatable crystalline membranes and enabling epitaxy of materials with large lattice mismatch. However, the atomic scale mechanisms for remote epitaxy remain unclear. Here we experimentally demonstrate that GaSb films grow on graphene-terminated GaSb (001) via a seeded lateral epitaxy mechanism, in which pinhole defects in the graphene serve as selective nucleation sites, followed by lateral epitaxy and coalescence into a continuous film. Remote interactions are not necessary in order to explain the growth. Importantly, the small size of the pinholes permits exfoliation of continuous, free-standing GaSb membranes. Due to the chemical similarity between GaSb and other III-V materials, we anticipate this mechanism to apply more generally to other materials. By combining molecular beam epitaxy with in-situ electron diffraction and photoemission, plus ex-situ atomic force microscopy and Raman spectroscopy, we track the graphene defect generation and GaSb growth evolution a few monolayers at a time. Our results show that the controlled introduction of nanoscale openings in graphene provides an alternative route towards tuning the growth and properties of 3D epitaxial films and membranes on 2D material masks.

Remote epitaxy represents a promising method for the synthesis of thin films on lattice-mismatched substrates, but its atomic-scale mechanisms are still unclear. Here, the authors demonstrate the growth of exfoliatable GaSb films on graphene-terminated GaSb (001) via seeded lateral epitaxy, showing that pinhole defects in graphene serve as selective nucleation sites.

Freestanding complex-oxide membranes

Complex oxides show a vast range of functional responses, unparalleled within the inorganic solids realm, making them promising materials for applications as varied as next-generation field-effect transistors, spintronic devices, electro-optic modulators, pyroelectric detectors, or oxygen reduction catalysts. Their stability in ambient conditions, chemical versatility, and large susceptibility to minute structural and electronic modifications make them ideal subjects of study to discover emergent phenomena and to generate novel functionalities for next-generation devices. Recent advances in the synthesis of single-crystal, freestanding complex oxide membranes provide an unprecedented opportunity to study these materials in a nearly-ideal system (e.g. free of mechanical/thermal interaction with substrates) as well as expanding the range of tools for tweaking their order parameters (i.e. (anti-)ferromagnetic, (anti-)ferroelectric, ferroelastic), and increasing the possibility of achieving novel heterointegration approaches (including interfacing dissimilar materials) by avoiding the chemical, structural, or thermal constraints in synthesis processes. Here, we review the recent developments in the fabrication and characterization of complex-oxide membranes and discuss their potential for unraveling novel physicochemical phenomena at the nanoscale and for further exploiting their functionalities in technologically relevant devices.

Thin-Film Ferroelectrics

Over the last 30 years, the study of ferroelectric oxides has been revolutionized by the implementation of epitaxial-thin-film-based studies, which have driven many advances in the understanding of ferroelectric physics and the realization of novel polar structures and functionalities. New questions have motivated the development of advanced synthesis, characterization, and simulations of epitaxial thin films and, in turn, have provided new insights and applications across the micro-, meso-, and macroscopic length scales. This review traces the evolution of ferroelectric thin-film research through the early days developing understanding of the roles of size and strain on ferroelectrics to the present day, where such understanding is used to create complex hierarchical domain structures, novel polar topologies, and controlled chemical and defect profiles. The extension of epitaxial techniques, coupled with advances in high-throughput simulations, now stands to accelerate the discovery and study of new ferroelectric materials. Coming hand-in-hand with these new materials is new understanding and control of ferroelectric functionalities. Today, researchers are actively working to apply these lessons in a number of applications, including novel memory and logic architectures, as well as a host of energy conversion devices.

Electrochemical Transparency of Graphene

In the present study, we used the electrochemical transparency of graphene to show that the direct intercalation of alkali-metal cations is not a prerequisite for the redox reaction of Prussian blue (PB). PB thin films passivated with monolayer graphene still underwent electrochemical redox reactions in the presence of alkali-metal ions (K⁺ or Na⁺) despite the inability of the cations to penetrate the graphene and be incorporated into the PB. Graphene passivation not only preserved the electrochemical activity of the PB but also substantially enhanced the stability of the PB. As a proof of concept, we showed that a transparent graphene electrode covering PB can be used as an excellent hydrogen peroxide transducer, thereby demonstrating the possibility of realizing an electrochemical sensor capable of long-term measurements.

Highly heterogeneous epitaxy of flexoelectric BaTiO3-δ membrane on Ge

The integration of complex oxides with a wide spectrum of functionalities on Si, Ge and flexible substrates is highly demanded for functional devices in information technology. We demonstrate the remote epitaxy of BaTiO₃ (BTO) on Ge using a graphene intermediate layer, which forms a prototype of highly heterogeneous epitaxial systems. The Ge surface orientation dictates the outcome of remote epitaxy. Single crystalline epitaxial BTO_3-δ films were grown on graphene/Ge (011), whereas graphene/Ge (001) led to textured films. The graphene plays an important role in surface passivation. The remote epitaxial deposition of BTO_3-δ follows the Volmer-Weber growth mode, with the strain being partially relaxed at the very beginning of the growth. Such BTO_3-δ films can be easily exfoliated and transferred to arbitrary substrates like Si and flexible polyimide. The transferred BTO_3-δ films possess enhanced flexoelectric properties with a gauge factor of as high as 1127. These results not only expand the understanding of heteroepitaxy, but also open a pathway for the applications of devices based on complex oxides.

The integration of epitaxial complex oxides on semiconductor and flexible substrates is required but challenging. Here, the authors report the highly heterogeneous epitaxy of transferrable BaTiO_3-δ membrane with enhanced flexoelectricity on Ge (011).

Wafer-scale monolithic integration of full-colour micro-LED display using MoS2 transistor

Large-scale growth of transition metal dichalcogenides and their subsequent integration with compound semiconductors is one of the major obstacles for two-dimensional materials implementation in optoelectronics applications such as active matrix displays or optical sensors. Here we present a novel transition metal dichalcogenide-on-compound-semiconductor fabrication method that is compatible with a batch microfabrication process. We show how a thin film of molybdenum disulfide (MoS₂) can be directly synthesized on a gallium-nitride-based epitaxial wafer to form a thin film transistor array. Subsequently, the MoS₂ thin film transistor was monolithically integrated with micro-light-emitting-diode (micro-LED) devices to produce an active matrix micro-LED display. In addition, we demonstrate a simple approach to obtain red and green colours through the printing of quantum dots on a blue micro-LED, which allows for the scalable fabrication of full-colour micro-LED displays. This strategy represents a promising route to attain heterogeneous integration, which is essential for high-performance optoelectronic systems that can incorporate the established semiconductor technology and emerging two-dimensional materials.

Atomic Mechanism of Strain Alleviation and Dislocation Reduction in Highly Mismatched Remote Heteroepitaxy Using a Graphene Interlayer

Remote heteroepitaxy is known to yield semiconductor films with better quality. However, the atomic mechanisms in systems with large mismatches are still unclear. Herein, low-strain single-crystalline nitride films are achieved on highly mismatched (∼16.3%) sapphire via graphene-assisted remote heteroepitaxy. Because of a weaker interface potential, the in-plane compressive strain at the interface releases by 30%, and dislocations are prevented. Meanwhile, the lattice distortions in the epilayer disappear when the structure climbs over the atomic steps on substrates because graphene renders the steps smooth. In this way, the density of edge dislocations in as-grown nitride films reduces to the same level as that of the screw dislocations, which is rarely observed in heteroepitaxy. Further, the indium composition in In_xGa_1-xN/GaN multiquantum wells increases to ∼32%, enabling the fabrication of a yellow light-emitting diode. This study demonstrates the advantages of remote heteroepitaxy for bandgap tuning and opens opportunities for photoelectronic and electronic applications.

Graphene-driving strain engineering to enable strain-free epitaxy of AlN film for deep ultraviolet light-emitting diode

The energy-efficient deep ultraviolet (DUV) optoelectronic devices suffer from critical issues associated with the poor quality and large strain of nitride material system caused by the inherent mismatch of heteroepitaxy. In this work, we have prepared the strain-free AlN film with low dislocation density (DD) by graphene (Gr)-driving strain-pre-store engineering and a unique mechanism of strain-relaxation in quasi-van der Waals (QvdW) epitaxy is presented. The DD in AlN epilayer with Gr exhibits an anomalous sawtooth-like evolution during the whole epitaxy process. Gr can help to enable the annihilation of the dislocations originated from the interface between AlN and Gr/sapphire by impelling a lateral two-dimensional growth mode. Remarkably, it can induce AlN epilayer to pre-store sufficient tensile strain during the early growth stage and thus compensate the compressive strain caused by hetero-mismatch. Therefore, the low-strain state of the DUV light-emitting diode (DUV-LED) epitaxial structure is realized on the strain-free AlN template with Gr. Furthermore, the DUV-LED with Gr demonstrate 2.1 times enhancement of light output power and a better stability of luminous wavelength compared to that on bare sapphire. An in-depth understanding of this work reveals diverse beneficial impacts of Gr on nitride growth and provides a novel strategy of relaxing the vital requirements of hetero-mismatch in conventional heteroepitaxy.

Interfacial Modulated Lattice-Polarity-Controlled Epitaxy of III-Nitride Heterostructures on Si(111)

Monolithic integration of wurtzite III-nitrides with nonpolar silicon (Si), the two most-produced semiconductor materials, is essential and critical for a broad range of applications in electronics, optoelectronics, quantum photonics, and renewable energy. To date, however, it has remained challenging to achieve III-nitride heterostructures on Si with controlled lattice-polarity. Herein, we show that such critical challenges of III-nitrides on Si can be fundamentally addressed through a unique interfacial modulated lattice-polarity-controlled epitaxy (IMLPCE). It is discovered that the lattice-polarity of aluminum nitride (AlN) grown on Si(111) is primarily determined by the AlSiN interlayer: N-polar and Al-polar AlN can be achieved by suppressing and promoting the AlSiN interlayer formation, respectively. Furthermore, we develop a unique active-nitrogen-free in situ annealing process to mitigate the AlSiN layer formation at the GaN/AlN interface, which can eliminate the inverted domain formation commonly seen in N-polar GaN on AlN/Si. This study provides an alternative approach for controlling the lattice-polarity of III-nitrides on Si substrates and will enable their seamless integration with the mature Si-based device technology.

Growth of 2D Materials at the Wafer Scale

Wafer-scale growth has become a critical bottleneck for scaling up applications of van der Waal (vdW) layered 2D materials in high-end electronics and optoelectronics. Most vdW 2D materials are initially obtained through top-down synthesis methods, such as exfoliation, which can only prepare small flakes on a micrometer scale. Bottom-up growth can enable 2D flake growth over a large area. However, seamless merging of these flakes to form large-area continuous films with well-controlled layer thickness and lattice orientation is still a significant challenge. This review briefly introduces several vdW layered 2D materials covering their lattice structures, representative physical properties, and potential roles in large-scale applications. Then, several methods used to grow vdW layered 2D materials at the wafer scale are reviewed in depth. In particular, three strategies are summarized that enable 2D film growth with a single-crystalline structure over the whole wafer: growth of an isolated domain, growth of unidirectional domains, and conversion of oriented precursors. After that, the progress in using wafer-scale 2D materials in integrated devices and advanced epitaxy is reviewed. Finally, future directions in the growth and scaling of vdW layered 2D materials are discussed.

Epitaxy of 2D Materials toward Single Crystals

Two-dimensional (2D) materials exhibit unique electronic, optical, magnetic, mechanical, and thermal properties due to their special crystal structure and thus have promising potential in many fields, such as in electronics and optoelectronics. To realize their real applications, especially in integrated devices, the growth of large-size single crystal is a prerequisite. Up to now, the most feasible way to achieve 2D single crystal growth is the epitaxy: growth of 2D materials of one or more specific orientations with single-crystal substrate. Only when the 2D domains have the same orientation, they can stitch together seamlessly and single-crystal 2D films can be obtained. In this view, four different epitaxy modes of 2D materials on various substrates are presented, including van der Waals epitaxy, edge epitaxy, step-guided epitaxy, and in-plane epitaxy focusing on the growth of graphene, hexagonal boron nitride (h-BN), and transition metal dichalcogenide (TMDC). The lattice symmetry relation and the interaction between 2D materials and the substrate are the key factors determining the epitaxy behaviors and thus are systematically discussed. Finally, the opportunities and challenges about the epitaxy of 2D single crystals in the future are summarized.

MOVPE Growth of GaN via Graphene Layers on GaN/Sapphire Templates

The remote epitaxy of GaN epilayers on GaN/sapphire templates was studied by using different graphene interlayer types. Monolayer, bilayer, double-stack of monolayer, and triple-stack of monolayer graphenes were transferred onto GaN/sapphire templates using a wet transfer technique. The quality of the graphene interlayers was examined by Raman spectroscopy. The impact of the interlayer type on GaN nucleation was analyzed by scanning electron microscopy. The graphene interface and structural quality of GaN epilayers were studied by transmission electron microscopy and X-ray diffraction, respectively. The influence of the graphene interlayer type is discussed in terms of the differences between remote epitaxy and van der Waals epitaxy. The successful exfoliation of GaN membrane is demonstrated.

Fabrication of a Microcavity Prepared by Remote Epitaxy over Monolayer Molybdenum Disulfide

Advances in epitaxy have enabled the preparation of high-quality material architectures consisting of incommensurate components. Remote epitaxy based on lattice transparency of atomically thin graphene has been intensively studied for cost-effective advanced device manufacturing and heterostructure formation. However, remote epitaxy on nongraphene two-dimensional (2D) materials has rarely been studied even though it has a broad and immediate impact on various disciplines, such as many-body physics and the design of advanced devices. Herein, we report remote epitaxy of ZnO on monolayer MoS₂ and the realization of a whispering-gallery-mode (WGM) cavity composed of a single crystalline ZnO nanorod and monolayer MoS₂. Cross-sectional transmission electron microscopy and first-principles calculations revealed that the nongraphene 2D material interacted with overgrown and substrate layers and also exhibited lattice transparency. The WGM cavity embedding monolayer MoS₂ showed enhanced luminescence of MoS₂ and multimodal emission.

2D Heterostructures for Ubiquitous Electronics and Optoelectronics: Principles, Opportunities, and Challenges

A grand family of two-dimensional (2D) materials and their heterostructures have been discovered through the extensive experimental and theoretical efforts of chemists, material scientists, physicists, and technologists. These pioneering works contribute to realizing the fundamental platforms to explore and analyze new physical/chemical properties and technological phenomena at the micro-nano-pico scales. Engineering 2D van der Waals (vdW) materials and their heterostructures via chemical and physical methods with a suitable choice of stacking order, thickness, and interlayer interactions enable exotic carrier dynamics, showing potential in high-frequency electronics, broadband optoelectronics, low-power neuromorphic computing, and ubiquitous electronics. This comprehensive review addresses recent advances in terms of representative 2D materials, the general fabrication methods, and characterization techniques and the vital role of the physical parameters affecting the quality of 2D heterostructures. The main emphasis is on 2D heterostructures and 3D-bulk (3D) hybrid systems exhibiting intrinsic quantum mechanical responses in the optical, valley, and topological states. Finally, we discuss the universality of 2D heterostructures with representative applications and trends for future electronics and optoelectronics (FEO) under the challenges and opportunities from physical, nanotechnological, and material synthesis perspectives.

Lattice Polarity Manipulation of Quasi-vdW Epitaxial GaN Films on Graphene Through Interface Atomic Configuration

Quasi van der Waals epitaxy, a pioneering epitaxy of sp³ -hybridized semiconductor films on sp² -hybridized 2D materials, provides a way, in principle, to achieve single-crystal epilayers with preferred atom configurations that are free of substrate. Unfortunately, this has not been experimentally confirmed in the case of the hexagonal semiconductor III-nitride epilayer until now. Here, it is reported that the epitaxy of gallium nitride (GaN) on graphene can tune the atom arrangement (lattice polarity) through manipulation of the interface atomic configuration, where GaN films with gallium and nitrogen polarity are achieved by forming CONGa(3) or COGaN(3) configurations, respectively, on artificial CO surface dangling bonds by atomic oxygen pre-irradiation on trilayer graphene. Furthermore, an aluminum nitride buffer/interlayer leads to unique metal polarity due to the formation of an AlON thin layer in a growth environment containing trace amounts of oxygen, which explains the open question of why those reported wurtzite III-nitride films on 2D materials always exhibit metal polarity. The reported atomic modulation through interface manipulation provides an effective model for hexagonal nitride semiconductor layers grown on graphene, which definitely promotes the development of novel semiconductor devices.

In-Situ Transmission Electron Microscopy Observation of Germanium Growth on Freestanding Graphene: Unfolding Mechanism of 3D Crystal Growth During Van der Waals Epitaxy

Breakthroughs in cutting-edge research fields such as hetero-integration of materials and the development of quantum devices are heavily bound to the control of misfit strain during heteroepitaxy. While remote epitaxy offers one of the most intriguing avenues, demonstrations of functional hybrid heterostructures are hardly possible without a deep understanding of the nucleation and growth kinetics of 3D crystals on graphene and their mutual interactions. Here, the kinetics of such processes from real-time observations of germanium (Ge) growth on freestanding single layer graphene (SLG) using in-situ transmission electron microscopy are unraveled. This powerful technique provides a unique opportunity to observe new and yet unexplored phenomena, which are not accessible to the standard ex situ characterizations. Through direct observations, remote interactions are elucidated between Ge crystals through the graphene layer in double heterostructures of Ge/graphene/Ge. Notably, the data show real-time evidence of vertical Ge atoms diffusion through the graphene layer. This phenomenon is attributed to the remote interactions of Ge atoms through the graphene lattice, due to its interatomic interaction transparency. Additionally, key mechanisms governing nucleation and initial growth in graphene were systematically determined. These findings enlighten the growth mechanism of graphene and provide a new pathway for disruptive hybrid semiconductor-graphene devices.

Long-Range Orbital Hybridization in Remote Epitaxy: The Nucleation Mechanism of GaN on Different Substrates via Single-Layer Graphene

Remote epitaxy is a very promising technique for the preparation of single-crystal thin films of flexibly transferred III-V group semiconductors. However, the epilayer nucleation mechanism of remote epitaxy and the epilayer-substrate interface interactions on both sides of graphene are not well-understood. In this study, remote homo- and heteroepitaxy of GaN nucleation layers (NLs) were performed by metal organic chemical vapor deposition on GaN, sapphire (Al₂O₃), and AlN substrates with transferred single-layer graphene, respectively. The results show that the interface damage of SLG/GaN at high temperature is difficult for us to achieve the remote homoepitaxy of GaN. Therefore, we explored the nucleation mechanism of remote heteroepitaxy of GaN on SLG/Al₂O₃ and SLG/AlN substrates. Nucleation density, surface coverage, diffusion coefficient, and scaled nucleation density were used to quantify the differences in nucleation information of GaN grown on different polar substrates. Using high-resolution X-ray diffraction and high-resolution transmission electron microscopy analysis, we revealed the interfacial orientation relationship and atomic arrangement distribution between the GaN NLs and substrates on both sides of the SLG. The electrostatic potential effect and adsorption ability of the substrates were further investigated by first-principles calculations based on density functional theory, revealing the principle that the substrate polarity affects the atomic nucleation density. The partial density of states shows that there is long-range orbital hybridization of the electronic states of the substrate and adsorbed atoms in remote epitaxy, and the crystal properties of the substrate play an important role in the in-plane orientation relationship of the NL and substrate across the SLG. The abovementioned results reveal the nature of remote epitaxy and broaden the perspective for the rapid and large-area preparation of single-crystal GaN films.

Facet-selective morphology-controlled remote epitaxy of ZnO microcrystals via wet chemical synthesis

We report on morphology-controlled remote epitaxy via hydrothermal growth of ZnO micro- and nanostructure crystals on graphene-coated GaN substrate. The morphology control is achieved to grow diverse morphologies of ZnO from nanowire to microdisk by changing additives of wet chemical solution at a fixed nutrient concentration. Although the growth of ZnO is carried out on poly-domain graphene-coated GaN substrate, the direction of hexagonal sidewall facet of ZnO is homogeneous over the whole ZnO-grown area on graphene/GaN because of strong remote epitaxial relation between ZnO and GaN across graphene. Atomic-resolution transmission electron microscopy corroborates the remote epitaxial relation. The non-covalent interface is applied to mechanically lift off the overlayer of ZnO crystals via a thermal release tape. The mechanism of facet-selective morphology control of ZnO is discussed in terms of electrostatic interaction between nutrient solution and facet surface passivated with functional groups derived from the chemical additives.