Teaching copolymerization catalysis to metal-organic frameworks by confining molecular catalysts in lattices

Copolymerization catalysis remains underexplored compared to the broad range of other catalytic reactions promoted by metal-organic frameworks (MOFs). Here, we report a lattice-confinement strategy that immobilizes a highly active molecular complex within MOFs, transforming them into effective heterogeneous catalysts for copolymerization-that couples cyclohexene oxide and CO2 into poly(cyclohexene carbonate) or integrates epoxide and phthalic anhydride into ester-ether copolymers. The encapsulated catalytically active species not only introduce new reaction patterns for MOFs but also enhance the structural robustness of the lattice, enabling the catalyst to be recycled multiple times.

Integrating Biocatalysts into Metal-Organic Frameworks: Disentangling the Roles of Affinity, Molecular Weight, and Size

The integration of biocatalysts within metal-organic frameworks (MOFs) is attracting growing interest due to its potential to both enhance biocatalyst stability and sustain biocatalyst activity in organic solvents. However, the factors that facilitate the post-synthetic infiltration of such large molecules into MOF pores remain unclear. This systematic study enabled the identification of the influence of biocatalyst molecular size, molecular weight and affinity on the uptake by an archetypal MOF, NU-1000. We analyzed a range of six biocatalysts with molecular weights from 1.9 kDa to 44.4 kDa, respectively. By employing a combination of fluorescence tagging and 3D-STED confocal laser scanning microscopy, we distinguished between biocatalysts that were internalized within the MOF pores and those sterically excluded. The catalytic functions of the biocatalysts hosted within the MOF were investigated and found to show strong variations relative to the solvated case, ranging from a two-fold increase to a strong decrease.

Recyclable Enzymatic Hydrolysis with Metal-Organic Framework Stabilized Humicola insolens Cutinase (HiC) for Potential PET Upcycling

The degradation and recycling of plastics, such as poly(ethylene terephthalate) (PET), often require energy-intensive processes with significant waste generation. Moreover, prevalent methods primarily entail physical recycling, yielding subpar materials. In contrast, upcycling involves breaking down polymers into monomers, generating valuable chemicals and materials for alternative products. Enzyme-catalyzed depolymerization presents a promising approach to break down PET without the need for extreme conditions and unstable or toxic metal catalysts, which are typical of traditional recycling methods. However, the practical application of enzymes has been hindered by their high cost and low stability. In this study, we stabilized the enzyme Humicola insolens cutinase (HiC) by encapsulating it within a mesoporous zirconium-based metal-organic framework, NU-1000. HiC@NU-1000 exhibited a quantitative degradation of the PET surrogate, ethylene glycol dibenzoate (EGDB), with greater selectivity than native HiC in producing the fully hydrolyzed product benzoic acid in partial organic solvent. Additionally, the heterogeneous catalyst is also active toward the hydrolysis of PET and has demonstrated recyclability for at least four catalytic cycles. The HiC@NU-1000 model system represents a promising approach to stabilize industrially relevant enzymes under conditions involving elevated temperatures and organic solvents, offering a potential solution for relevant protein-related applications.

Expanding the Design Space of Polymer-Metal Organic Framework (MOF) Gels by Understanding Polymer-MOF Interactions

The fabrication of polymer-MOF composite gels holds great potential to provide emergent properties for drug delivery, environmental remediation, and catalysis. To leverage the full potential of these composites, we investigated how the presence and chemistry of polymers impact MOF formation within the composites and, in turn, how MOFs impact polymer gelation. We show that polymers with a high density of strongly metal-binding carboxylic acids inhibit MOF formation; however, reducing the density of carboxylic acids or substituting them with weaker metal-binding hydroxyl groups permits both MOF formation and gelation within composites. Preparing composites with poly(ethylene glycol) (PEG), which does not bind MOF zirconium (Zr)-oxo clusters, and observing gelation suggests that MOFs can entrap polymer chains to create cross-links in addition to cross-linking them through polymer-Zr-oxo interactions. Both simulations and experiments show composite hydrogels formed with poly(vinyl alcohol) (PVA) to be more stable than those made with PEG, which can reptate through MOF pores upon heating. We demonstrate the generalizability of this composite formation process across different Zr-based MOFs (UiO-66, NU-901, UiO-67, and MOF-525) and by spin-coating gels into conformable films. PVA-UiO-66 composite hydrogels demonstrated high sorption and sustained release of methylene blue relative to the polymer alone (3× loading, 28× slower release), and PVA-MOF-525 composite hydrogels capably sorb the therapeutic peptide Angiotensin 1-7. By understanding the influence of polymer-MOF interactions on the structure and properties of composite gels, this work informs and expands the design space of this emerging class of materials.

Understanding the Adsorption and Diffusion Behaviors of PBUT in Biocompatible MOFs

With the increasing incidence of chronic kidney disease, the effective control of protein-bound uremic toxins (PBUTs), which are difficult to remove through dialysis, has become a priority. In this study, the adsorption and diffusion behaviors of several metal-organic frameworks (MOFs) for PBUTs (indoxyl sulfate and p-cresyl sulfate) were studied by molecular dynamics (MD) simulations and umbrella sampling. For the NU series of MOFs, good correlations between the Gibbs free energy (ΔG) and the experimental clearance rates of PBUTs are found. For the adsorption behaviors, in terms of ΔG, DAJWET exhibits the best adsorption effect for indoxyl sulfate (IS), whereas NU-1000 shows the best effect for p-cresyl sulfate (pCS). Similar trends observed in the radial distribution function and mean square displacement results suggest that the π-π stacking interactions play a crucial role in the adsorption and diffusion of PBUTs by MOFs. Furthermore, it can be concluded that MOFs with highly conjugated groups (porphyrin rings and pyrene groups) tend to generate more PBUT attraction, and provide design principles for potential MOF candidates in the removal of PBUTs.

A Miniaturized Method for Evaluating the Dynamic Gas-Phase Adsorption and Degradation of Sarin on Porous Adsorbents at Different Humidity Levels

Metal organic frameworks based on zirconium nodes (Zr-MOFs) have impressive adsorption capacities, and many can rapidly hydrolyze toxic organophosphorus nerve agents. They could thus potentially replace commonly used adsorbents in respiratory filters. However, current test methodologies are poorly adapted to screen the large number of available MOFs, and data for nerve agent adsorption by MOFs are scarce. This paper presents a miniaturized method for assessing the capacity of Zr-MOFs for dynamic gas phase adsorption and degradation of sarin (GB) into the primary hydrolysis product isopropyl methyl phosphonic acid (IMPA). The method was validated by comparing the dynamic adsorption capacities of activated carbon (AC) and NU-1000 for GB under dry and humid conditions. Under dry conditions, unimpregnated AC had a greater capacity for GB uptake (0.68 ± 0.06 g/g) than pelletized NU-1000 (0.36 ± 0.03 g/g). At 55% relative humidity (RH), the capacity of AC was largely unchanged (0.72 ± 0.10 g/g) but that of NU-1000 increased slightly, to 0.46 ± 0.10 g/g. However, NU-1000 exhibited poor water retention at 55% RH. For both adsorbents, the degree of hydrolysis of GB into IMPA was significantly greater at 55% RH than under dry conditions, but the overall degree of hydrolysis was limited in both cases. Further tests at higher relative humidities are needed to fully evaluate the ability of NU-1000 to degrade GB after adsorption from the gas phase. The proposed experimental setup uses very small amounts of both adsorbent material (20 mg) and toxic agent, making it ideal for assessing new MOFs. However, future methodological challenges are reliable generation of sarin at higher RH and exploring sensitive methods to monitor degradation products from nerve agents in real-time.

Role of Metal-Organic Framework Topology on Thermodynamics of Polyoxometalate Encapsulation

Polyoxometalates (POMs) are discrete anionic clusters whose rich redox properties, strong Bro̷nsted acidity, and high availability of active sites make them potent catalysts for oxidation reactions. Metal-organic frameworks (MOFs) have emerged as tunable, porous platforms to immobilize POMs, thus increasing their solution stability and catalytic activity. While POM@MOF composite materials have been widely used for a variety of applications, little is known about the thermodynamics of the encapsulation process. Here, we utilize an up-and-coming technique in the field of heterogeneous materials, isothermal titration calorimetry (ITC), to obtain full thermodynamic profiles (ΔH, ΔS, ΔG, and Ka) of POM binding. Six different 8-connected hexanuclear Zr-MOFs were investigated to determine the impact of MOF topology (csq, scu, and the) on POM encapsulation thermodynamics.

Chemically Reversible CO2 Uptake by Dendrimer-Impregnated Metal-Organic Frameworks

Industrialization over the past two centuries has resulted in a continuous rise in global CO2 emissions. These emissions are changing ecosystems and livelihoods. Therefore, methods are needed to capture these emissions from point sources and possibly from our atmosphere. Though the amount of CO2 is rising, it is challenging to capture directly from air because its concentration in air is extremely low, 0.04%. In this study, amines installed inside metal-organic frameworks (MOFs) are investigated for the adsorption of CO2, including at low concentrations. The amines used are polyamidoamine dendrimers that contain many primary amines. Chemically reversible adsorption of CO2 via carbamate formation was observed, as was enhanced uptake of carbon dioxide, likely via dendrimer-amide-based physisorption. Limiting factors in this initial study are comparatively low dendrimer loadings and slow kinetics for carbon dioxide uptake and release, even at 80 °C.

Enhancing Drug Delivery Efficacy Through Bilayer Coating of Zirconium-Based Metal-Organic Frameworks: Sustained Release and Improved Chemical Stability and Cellular Uptake for Cancer Therapy

The development of nanoparticle (NP)-based drug carriers has presented an exciting opportunity to address challenges in oncology. Among the 100,000 available possibilities, zirconium-based metal-organic frameworks (MOFs) have emerged as promising candidates in biomedical applications. Zr-MOFs can be easily synthesized as small-size NPs compatible with intravenous injection, whereas the ease of decorating their external surfaces with functional groups allows for targeted treatment. Despite these benefits, Zr-MOFs suffer degradation and aggregation in real, in vivo conditions, whereas the loaded drugs will suffer the burst effect-i.e., the fast release of drugs in less than 48 h. To tackle these issues, we developed a simple but effective bilayer coating strategy in a generic, two-step process. In this work, bilayer-coated MOF NU-901 remained well dispersed in biologically relevant fluids such as buffers and cell growth media. Additionally, the coating enhances the long-term stability of drug-loaded MOFs in water by simultaneously preventing sustained leakage of the drug and aggregation of the MOF particles. We evaluated our materials for the encapsulation and transport of pemetrexed, the standard-of-care chemotherapy in mesothelioma. The bilayer coating allowed for a slowed release of pemetrexed over 7 days, superior to the typical 48 h release found in bare MOFs. This slow release and the related performance were studied in vitro using both A549 lung cancer and 3T mesothelioma cells. Using high-resolution microscopy, we found the successful uptake of bilayer-coated MOFs by the cells with an accumulation in the lysosomes. The pemetrex-loaded NU-901 was indeed cytotoxic to 3T and A549 cancer cells. Finally, we demonstrated the general approach by extending the coating strategy using two additional lipids and four surfactants. This research highlights how a simple yet effective bilayer coating provides new insights into the design of promising MOF-based drug delivery systems.

Atomically Precise Single-Site Catalysts via Exsolution in a Polyoxometalate-Metal-Organic-Framework Architecture

Single-site catalysts (SSCs) achieve a high catalytic performance through atomically dispersed active sites. A challenge facing the development of SSCs is aggregation of active catalytic species. Reducing the loading of these sites to very low levels is a common strategy to mitigate aggregation and sintering; however, this limits the tools that can be used to characterize the SSCs. Here we report a sintering-resistant SSC with high loading that is achieved by incorporating Anderson-Evans polyoxometalate clusters (POMs, MMo6O24, M = Rh/Pt) within NU-1000, a Zr-based metal-organic framework (MOF). The dual confinement provided by isolating the active site within the POM, then isolating the POMs within the MOF, facilitates the formation of isolated noble metal sites with low coordination numbers via exsolution from the POM during activation. The high loading (up to 3.2 wt %) that can be achieved without sintering allowed the local structure transformation in the POM cluster and the surrounding MOF to be evaluated using in situ X-ray scattering with pair distribution function (PDF) analysis. Notably, the Rh/Pt···Mo distance in the active catalyst is shorter than the M···M bond lengths in the respective bulk metals. Models of the active cluster structure were identified based on the PDF data with complementary computation and X-ray absorption spectroscopy analysis.

Uranyl uptake into metal-organic frameworks: a detailed X-ray structural analysis

Metal-organic frameworks (MOF) are a subclass of porous framework materials that have been used for a wide variety of applications in sensing, catalysis, and remediation. Among these myriad applications is their remarkable ability to capture substances in a variety of environments ranging from benign to extreme. Among the most common and problematic substances found throughout the world's oceans and water supplies is [UO2]2+, a common mobile ion of uranium, which is found both naturally and as a result of anthropogenic activities, leading to problematic environmental contamination. While some MOFs possess high capability for the uptake of [UO2]2+, many more of the thousands of MOFs and their modifications that have been produced over the years have yet to be studied for their ability to uptake [UO2]2+. However, studying the thousands of MOFs and their modifications presents an incredibly difficult task. As such, a way to narrow down the numbers seems imperative. Herein, we evaluate the binding behaviors as well as identify the specific binding sites of [UO2]2+ incorporated into six different Zr MOFs to elucidate specific features that improve [UO2]2+ uptake. In doing so, we also present a method for the determination and verification of these binding sites by Anomalous wide-angle X-ray scattering, X-ray fluorescence, and X-ray absorption spectroscopy. This research not only presents a way for future research into the uptake of [UO2]2+ into MOFs to be conducted but also a means to evaluate MOFs more generally for the uptake of other compounds to be applied for environmental remediation and improvement of ecosystems globally.

Influence of Water Content on Speciation and Phase Formation in Zr-Porphyrin-Based MOFs

Controlled synthesis of phase-pure metal-organic frameworks (MOFs) is essential for their application in technological areas such as catalysis or gas sorption. Yet, knowledge of their phase formation and growth remain rather limited, particularly with respect to species such as water whose vital role in MOF synthesis is often neglected. As a consequence, synthetic protocols often lack reproducibility when multiple MOFs can form from the same metal source and linker, and phase mixtures are obtained with little or no control over their composition. In this work, the role of water in the formation of the Zr-porphyrin MOF disordered PCN-224 (dPCN-224) is investigated. Through X-ray total scattering and scanning electron microscopy, it is observed that dPCN-224 forms via a metal-organic intermediate that consists of Zr6O4(OH)4 clusters linked by tetrakis(4-carboxy-phenyl)porphyrin molecules. Importantly, water is not only essential to the formation of Zr6O4(OH)4 clusters, but it also plays a primary role in dictating the formation kinetics of dPCN-224. This multidisciplinary approach to studying the speciation of dPCN-224 provides a blueprint for how Zr-MOF synthesis protocols can be assessed and their reproducibility increased, and highlights the importance of understanding the role of water as a decisive component in Zr-MOF formation.

Metal-Organic Frameworks as a Tunable Platform to Deconvolute Stereoelectronic Effects on the Catalytic Activity of Thioanisole Oxidation

The local environment of a metal active site plays an important role in affecting the catalytic activity and selectivity. In recent studies, tailoring the behavior of a molybdenum-based active site via modulation of the first coordination sphere has led to improved thioanisole oxidation performance, but disentangling electronic effects from steric influences that arise from these modifications is nontrivial, especially in heterogeneous systems. To this end, the tunability of metal-organic frameworks (MOFs) makes them promising scaffolds for controlling the coordination sphere of a heterogeneous, catalytically active metal site while offering additional attractive features such as crystallinity and high porosity. Herein, we report a variety of MOF-supported Mo species, which were investigated for catalytic thioanisole oxidation to methyl phenyl sulfoxide and/or methyl phenyl sulfone using tert-butyl hydroperoxide (tBHP) as the oxidant. In particular, MOFs of contrasting node architectures were targeted, presenting a unique opportunity to investigate the stereoelectronic control of Mo active sites in a systematic manner. A Zr6-based MOF, NU-1000, was employed along with its sulfated analogue Zr6-based NU-1000-SO4 to anchor a dioxomolybdenum species, which enabled examination of support-mediated active site polarizability on catalytic performance. In addition, a MOF containing a mixed metal node, Mo-MFU-4l, was used to probe the stereoelectronic impact of an N-donor ligand environment on the catalytic activity of the transmetalated Mo center. Characterization techniques, including single crystal X-ray diffraction, were concomitantly used with reaction time course profiles to better comprehend the dynamics of different Mo active sites, thus correlating structural change with activity.

A Nanocavitation Approach to Understanding Water Capture, Water Release, and Framework Physical Stability in Hierarchically Porous MOFs

Chemically stable metal-organic frameworks (MOFs) featuring interconnected hierarchical pores have proven to be promising for a remarkable variety of applications. Nevertheless, the framework's susceptibility to capillary-force-induced pore collapse, especially during water evacuation, has often limited practical applications. Methodologies capable of predicting the relative magnitudes of these forces as functions of the pore size, chemical composition of the pore walls, and fluid loading would be valuable for resolution of the pore collapse problem. Here, we report that a molecular simulation approach centered on evacuation-induced nanocavitation within fluids occupying MOF pores can yield the desired physical-force information. The computations can spatially pinpoint evacuation elements responsible for collapse and the chemical basis for mitigation of the collapse of modified pores. Experimental isotherms and difference-electron density measurements of the MOF NU-1000 and four chemical variants validate the computational approach and corroborate predictions regarding relative stability, anomalous sequence of pore-filling, and chemical basis for mitigation of destructive forces.

Enhancing Uranium Removal with a Titanium-Incorporated Zirconium-Based Metal-Organic Framework

The urgent need to efficiently and rapidly decontaminate uranium contamination in aquatic environments underscores its significance for ecological preservation and environmental restoration. Herein, a series of titanium-doped zirconium-based metal-organic frameworks were meticulously synthesized through a stepwise process. The resultant hybrid bimetallic materials, denoted as NU-Zr-n%Ti, exhibited remarkable efficiency in eliminating uranium (U (VI)) from aqueous solution. Batch experiments were executed to comprehensively assess the adsorption capabilities of NU-Zr-n%Ti. Notably, the hybrid materials exhibited a substantial increase in adsorption capacity for U (VI) compared to the parent NU-1000 framework. Remarkably, the optimized NU-Zr-15%Ti displayed a noteworthy adsorption capacity (∼118 mg g-1) along with exceptionally rapid kinetics at pH 4.0, surpassing that of pristine NU-1000 by a factor of 10. This heightened selectivity for U (VI) persisted even when diverse ions exist. The dominant mechanisms driving this high adsorption capacity were identified as the robust electrostatic attraction between the negatively charged surface of NU-Zr-15%Ti and positively charged U (VI) species as well as surface complexation. Consequently, NU-Zr-15%Ti emerges as a promising contender for addressing uranium-laden wastewater treatment and disposal due to its favorable sequestration performance.

Directing the Selectivity of Oxygen Reduction to Water by Confining a Cu Catalyst in a Metal Organic Framework

Electrocatalysis is to play a key role in the transition towards a sustainable chemical and energy industry and active, stable and selective redox catalysts are much needed. Porous structures such as metal organic frameworks (MOFs) are interesting materials as these may influence selectivity of chemical reactions through confinement effects. In this work, the oxygen reduction catalyst Cu-tmpa was incorporated into the NU1000 MOF. Confinement of the catalyst within NU1000 steers the selectivity of the oxygen reduction reaction (ORR) towards water rather than peroxide. This is attributed to retention of the obligatory H2 O2 intermediate in close proximity to the catalytic center. Moreover, the resulting NU1000|Cu-tmpa MOF shows an excellent activity and stability in prolonged electrochemical studies, illustrating the potential of this approach.

Inducing Circularly Polarized Luminescence by Confined Synthesis of Ultrasmall Chiral Carbon Nanodot Arrays in Pyrene-Based MOF Thin Film

Combining the features of the host-guest system and chirality is an efficient strategy to achieve circularly polarized luminescence (CPL). Herein, well-defined chiral carbon nanodot (chirCND) arrays were confined-synthesized by low-temperature calcination of a chiral amino acid loaded metal-organic framework (MOF) to induce high CPL. An achiral porous pyrene-based MOF NU-1000 thin film as the host template was prepared by a liquid-phase epitaxial layer-by-layer fashion, and chiral amino acids as the carbon sources could be confined in the porous MOF and carbonized to homogeneous and ultrasmall chirCND arrays, resulting in a chirCNDs@NU-1000 thin film (l-CNDsx@NU-1000; x = l-cysteine (cys), l-serine, l-histidine, l-glutamic acid, and l-pyroglutamic acid). The results show the pristine chirCNDs by directly carbonizing chiral amino acids hardly endow them with a CPL property. By contrast, benefiting from the arrayed confinement and coordination interaction between chirCNDs and NU-1000, the chirality transfer on the excited state of chirCNDs@NU-1000 is enabled, leading to strong CPL performance (a high luminescence dissymmetry factor glum of l-CNDscys@NU-1000 thin film reached 1.74 × 10-2). This study of chirCNDs encapsulated in fluorescent MOF thin films provides a strategy for developing uniform chiral carbon nanoarrays and offers chiral host-guest thin-film materials for optical applications.

Alignment of Breathing Metal-Organic Framework Particles for Enhanced Water-Driven Actuation

As the majority of known metal-organic frameworks (MOFs) possess anisotropic crystal lattices and thus anisotropic physicochemical properties, a pressing practical challenge in MOF research is the establishment of robust and simple processing methods to fully harness the anisotropic properties of the MOFs in various applications. We address this challenge by applying an E-field to precisely align MIL-88A microcrystals and generate MIL-88A@polymer films. Thereafter, we demonstrate the impact of MOF crystal alignment on the actuation properties of the films as a proof of concept. We investigate how different anisotropies of the MIL-88A@polymer films, specifically, crystal anisotropy, particle alignment, and film composition, can lead to the synergetic enhancement of the film actuation upon water exposure. Moreover, we explore how the directionality in application of the external stimuli (dry/humid air stream, water/air interface) affects the direction and the extent of the MIL-88A@polymer film movement. Apart from the superior water-driven actuation properties of the developed films, we demonstrate by dynamometer measurements the higher degree of mechanical work performed by the aligned MIL-88A@polymer films with the preserved anisotropies compared to the unaligned films. The insights provided by this work into anisotropic properties displayed by aligned MIL-88A@polymer films promise to translate crystal performance benefits measured in laboratories into real-world applications. We anticipate that our work is a starting point to utilize the full potential of anisotropic properties of MOFs.

Copper nanoparticle-embellished Zr-based metal-organic framework for electrocatalytic hydrogen evolution reaction

Copper nanoparticles (Cu NPs) have gained immense popularity in catalysis by virtue of their impressive properties and earth abundance. Herein, we incorporated small-sized copper nanoparticles into the amine-functionalized NU-1000 MOF and used this composite material as an effective catalyst for electrocatalytic Hydrogen Evolution Reaction (HER) studies.

Utilization of Physical Anisotropy in Metal-Organic Frameworks via Postsynthetic Alignment Control with Liquid Crystal

Metal-organic frameworks (MOFs) represent crystalline materials constructed from combinations of metal and organic units to often yield anisotropic porous structures and physical properties. Postsynthetic methods to align the MOF crystals in bulk remain scarce yet tremendously important to fully utilize their structure-driven intrinsic properties. Herein, we present an unprecedented composite of liquid crystals (LCs) and MOFs and demonstrate the use of nematic LCs to dynamically control the orientation of MOF crystals with exceptional order parameters (as high as 0.965). Unique patterns formed through a facile multidirectional alignment of MOF crystals exhibit polarized fluorescence with the fluorescence intensity of a pattern dependent on the angle of a polarizer, offering potential use in various optical applications such as an optical security label. Further, the alignment mechanism indicates that the method is applicable to numerous combinations of MOFs and LCs, which include UV polymerizable LC monomers used to fabricate free-standing composite films.

Rationally Tailored Mesoporous Hosts for Optimal Protein Encapsulation

Proteins play important roles in the therapeutic, medical diagnostic, and chemical catalysis industries. However, their potential is often limited by their fragile and dynamic nature outside cellular environments. The encapsulation of proteins in solid materials has been widely pursued as a route to enhance their stability and ease of handling. Nevertheless, the experimental investigation of protein interactions with rationally designed synthetic hosts still represents an area in need of improvement. In this work, we leveraged the tunability and crystallinity of metal-organic frameworks (MOFs) and developed a series of crystallographically defined protein hosts with varying chemical properties. Through systematic studies, we identified the dominating mechanisms for protein encapsulation and developed a host material with well-tailored properties to effectively encapsulate the protein ubiquitin. Specifically, in our mesoporous hosts, we found that ubiquitin encapsulation is thermodynamically favored. A more hydrophilic encapsulation environment with favorable electrostatic interactions induces enthalpically favored ubiquitin-MOF interactions, and a higher pH condition reduces the intraparticle diffusion barrier, both leading to a higher protein loading. Our findings provide a fundamental understanding of host-guest interactions between proteins and solid matrices and offer new insights to guide the design of future protein host materials to achieve optimal protein loading. The MOF modification technique used in this work also demonstrates a facile method to develop materials easily customizable for encapsulating proteins with different surface properties.

MOF/polymer hybrids through in situ free radical polymerization in metal-organic frameworks

We use the free radical polymerization initiator 4,4'-azobis(cyanovaleric acid) coordinated to the open metal sites of metal-organic frameworks (MOFs) to give rise to highly uniform MOF/polymer hybrids. We demonstrate this strategy on two robust zirconium MOFs (NU-1000 and MOF-808), which are the most effective catalysts for degradation of chemical warfare nerve agents. The resulting hybrid materials maintain their hydrolytic catalytic activity and have substantially improved adhesion to polypropylene and activated carbon textile fibers, yielding highly robust MOF/polymer/textile hybrid systems. These composites are suitable for the green production of active protective clothing and filters capable of detoxifying organophosphorus warfare agents.

High-Throughput Experimentation, Theoretical Modeling, and Human Intuition: Lessons Learned in Metal-Organic-Framework-Supported Catalyst Design

We have screened an array of 23 metals deposited onto the metal-organic framework (MOF) NU-1000 for propyne dimerization to hexadienes. By a first-of-its-kind study utilizing data-driven algorithms and high-throughput experimentation (HTE) in MOF catalysis, yields on Cu-deposited NU-1000 were improved from 0.4 to 24.4%. Characterization of the best-performing catalysts reveal conversion to hexadiene to be due to the formation of large Cu nanoparticles, which is further supported by reaction mechanisms calculated with density functional theory (DFT). Our results demonstrate both the strengths and weaknesses of the HTE approach. As a strength, HTE excels at being able to find interesting and novel catalytic activity; any a priori theoretical approach would be hard-pressed to find success, as high-performing catalysts required highly specific operating conditions difficult to model theoretically, and initial simple single-atom models of the active site did not prove representative of the nanoparticle catalysts responsible for conversion to hexadiene. As a weakness, our results show how the HTE approach must be designed and monitored carefully to find success; in our initial campaign, only minor catalytic performances (up to 4.2% yield) were achieved, which were only improved following a complete overhaul of our HTE approach and questioning our initial assumptions.

Ultrasensitive lateral flow immunoassay for staphylococcal enterotoxin B using nanosized fluorescent metal-organic frameworks

Owing to their outstanding optical properties and superior physical/chemical stability, dye-doped fluorescent nanoparticles (NPs) are growing exponentially as signal labels of immunochromatographic lateral flow immunoassay (LFA) for the detection of various analytes. However, the key challenge in the design of these fluorescent NPs is to confine the fluorophores inside NPs at extreme concentrations, at which dyes tend to self-quench resulting from the formation of non-fluorescent aggregates. Looking for other advantageous nanomaterials, we propose for the first time the use of a nanosized fluorescent metal-organic framework (nanoMOF) in LFA for the detection of staphylococcal enterotoxin B (SEB) as a model analyte. Featured by the chromophore assembly, the nanoMOF exhibited a high dye loading (∼60%) and strong fluorescence intensity, which was due to the reduced self-quenching of dyes in a variety of MOF matrices. The strong green fluorescence intensity of the nanoMOF gives a high contrast against the background of the strips and the sensitivity reflected by photoluminescence was improved by the enhanced antenna effect. Furthermore, due to the high surface area for antibody stemming, the limit of detection (LOD) of the MOF based LFA for SEB detection was as low as 0.025 ng mL^-1. The compatibility of the MOF based LFA with dairy samples and its stability under long-term storage conditions were also demonstrated. The integration of a nanoMOF into LFA to detect toxins could inspire the utilization of such nanomaterial-based labels in similar immunochromatographic testing methods to improve their performance.

Exchange controlled triplet fusion in metal-organic frameworks

Triplet-fusion-based photon upconversion holds promise for a wide range of applications, from photovoltaics to bioimaging. The efficiency of triplet fusion, however, is fundamentally limited in conventional molecular and polymeric systems by its spin dependence. Here, we show that the inherent tailorability of metal-organic frameworks (MOFs), combined with their highly porous but ordered structure, minimizes intertriplet exchange coupling and engineers effective spin mixing between singlet and quintet triplet-triplet pair states. We demonstrate singlet-quintet coupling in a pyrene-based MOF, NU-1000. An anomalous magnetic field effect is observed from NU-1000 corresponding to an induced resonance between singlet and quintet states that yields an increased fusion rate at room temperature under a relatively low applied magnetic field of 0.14 T. Our results suggest that MOFs offer particular promise for engineering the spin dynamics of multiexcitonic processes and improving their upconversion performance.

Synthesis and Biomedical Applications of Highly Porous Metal-Organic Frameworks

In this review, aspects of the synthesis, framework topologies, and biomedical applications of highly porous metal-organic frameworks are discussed. The term "highly porous metal-organic frameworks" (HPMOFs) is used to denote MOFs with a surface area larger than 4000 m² g^-1. Such compounds are suitable for the encapsulation of a variety of large guest molecules, ranging from organic dyes to drugs and proteins, and hence they can address major contemporary challenges in the environmental and biomedical field. Numerous synthetic approaches towards HPMOFs have been developed and discussed herein. Attempts are made to categorise the most successful synthetic strategies; however, these are often not independent from each other, and a combination of different parameters is required to be thoroughly considered for the synthesis of stable HPMOFs. The majority of the HPMOFs in this review are of special interest not only because of their high porosity and fascinating structures, but also due to their capability to encapsulate and deliver drugs, proteins, enzymes, genes, or cells; hence, they are excellent candidates in biomedical applications that involve drug delivery, enzyme immobilisation, gene targeting, etc. The encapsulation strategies are described, and the MOFs are categorised according to the type of biomolecule they are able to encapsulate. The research field of HPMOFs has witnessed tremendous development recently. Their intriguing features and potential applications attract researchers' interest and promise an auspicious future for this class of highly porous materials.

Enhancing Separation Abilities of "Low-Performance" Metal-Organic Framework Stationary Phases through Size Control

Peak broadening and peak tailing are common but rebarbative phenomena that always occur when using metal-organic frameworks (MOFs) as stationary phases. These phenomena result in diverse "low-performance" MOF stationary phases. Here, by adjusting the particle size of MOF stationary phases from microscale to nanoscale, we successfully enhance the separation abilities of these "low-performance" MOFs. Three zirconium-based MOFs (NU-1000, PCN-608, and PCN-222) with different organic ligands were synthesized with sizes of tens of micrometers and hundreds of nanometers, respectively. All the nanoscale MOFs exhibited exceedingly higher separation abilities than the respective microscale MOFs. The mechanism investigation proved that reducing the particle size can reduce the mass transfer resistance, thus enhancing the column efficiency by controlling the separation kinetics. Modulating the particle size of MOFs is an efficient way to enhance the separation capability of "low-performance" MOFs and to design high-performance MOF stationary phases.

Photocatalytic Biocidal Coatings Featuring Zr6Ti4-Based Metal-Organic Frameworks

The world is currently suffering socially, economically, and politically from the recent pandemic outbreak due to the coronavirus disease 2019 (COVID-19), and those in hospitals, schools, and elderly nursing homes face enhanced threats. Healthcare textiles, such as masks and medical staff gowns, are susceptible to contamination of various pathogenic microorganisms, including bacteria and viruses. Metal-organic frameworks (MOFs) can potentially address these challenges due to their tunable reactivity and ability to be incorporated as porous coatings on textile materials. Here, we report how incorporating titanium into the zirconium-pyrene-based MOF NU-1000, denoted as NU-1012, generates a highly reactive biocidal photocatalyst. This MOF features a rare ligand migration phenomenon, and both the Ti/Zr center and the pyrene linker act synergistically as dual active centers and widen the absorption band for this material, which results in enhanced reactive oxygen species generation upon visible light irradiation. Additionally, we found that the ligand migration process is generally applicable to other csq topology Zr-MOFs. Importantly, NU-1012 can be easily incorporated onto cotton textile cloths as a coating, and the resulting composite material demonstrates fast and potent biocidal activity against Gram-negative bacteria (Escherichia coli), Gram-positive bacteria (Staphylococcus epidermidis), and T7 bacteriophage virus with up to a 7-log(99.99999%) reduction within 1 h under simulated daylight.

Electrocatalytic water oxidation from a mixed linker MOF based on NU-1000 with an integrated ruthenium-based metallo-linker

A novel tetratopic metallo-linker, [Ru(tda)(py(PhCOOH)₂)₂], 1, (tda = 2,2':6',2''-terpyridine-6,6''-dicarboxylate; py(PhCOOH)₂ = (4,4'-(pyridine-3,5-diyl)dibenzoic acid), that is structurally based on one of the most active molecular water oxidation catalysts has been prepared and fully characterized, including single crystal X-ray diffraction. 1 bears geometric similarities to H₄TBAPy (H₄TBAPy = 4,4',4'',4'''-(pyrene-1,3,6,8-tetrayl)tetrabenzoic acid), i.e. the native linker in NU-1000, which offers the possibility to synthesize NU-1000-Ru mixed linker MOFs solvothermally. Mixed linker MOF formation was demonstrated by powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM), and Ru linker incorporation confirmed by FT-IR, energy-dispersive X-ray (EDX) spectroscopy and inductively coupled plasma optical emission spectroscopy (ICP-OES). It was found that the Ru contents in the final mixed linker MOFs correlate with the amount of Ru linker present during solvothermal synthesis, albeit not in a linear fashion. The cyclic voltammograms (CV) of the mixed linker MOFs are largely dominated by TBAPy-based oxidations with features attributed to 1. Interestingly, Ru linkers near the crystal surface are oxidized directly by interfacial hole transfer form the electrode, while those in the crystal interior can be oxidized indirectly from oxidized TBAPy linkers at more anodic potential. Upon repeated scanning, the CVs show the appearance of new waves that arise from irreversible TBAPy oxidation, as well as from the activation of the Ru-based water oxidation catalyst. Of the materials prepared, the one with the highest Ru content, NU-1000-Ru_high, was shown to catalyze the electrochemical oxidation of water to dioxygen. The Faradaic efficiency (FE) of the construct is 37%, due to water oxidation being accompanied by oxidative transformations of the TBAPy linkers. Despite the low FE, NU-1000-Ru_high is still among the best MOF-based water oxidation catalysts, operating by a unique co-linker mediated hole-transport mechanism to supply oxidizing equivalents also to catalysts in the crystal interior.

MOF-Hosted Enzymes for Continuous Flow Catalysis in Aqueous and Organic Solvents

Fully exploiting the potential of enzymes in cell-free biocatalysis requires stabilization of the catalytically active proteins and their integration into efficient reactor systems. Although in recent years initial steps towards the immobilization of such biomolecules in metal-organic frameworks (MOFs) have been taken, these demonstrations have been limited to batch experiments and to aqueous conditions. Here we demonstrate a MOF-based continuous flow enzyme reactor system, with high productivity and stability, which is also suitable for organic solvents. Under aqueous conditions, the stability of the enzyme was increased 30-fold, and the space-time yield exceeded that obtained with other enzyme immobilization strategies by an order of magnitude. Importantly, the infiltration of the proteins into the MOF did not require additional functionalization, thus allowing for time- and cost-efficient fabrication of the biocatalysts using label-free enzymes.

Metal-Organic Frameworks in Mixed-Matrix Membranes for High-Speed Visible-Light Communication

Mixed-matrix membranes (MMMs) based on luminescent metal-organic frameworks (MOFs) and emissive polymers with the combination of their unique advantages have great potential in separation science, sensing, and light-harvesting applications. Here, we demonstrate MMMs for the field of high-speed visible-light communication (VLC) using a very efficient energy transfer strategy at the interface between a MOF and an emissive polymer. Our steady-state and ultrafast time-resolved experiments, supported by high-level density functional theory calculations, revealed that efficient and ultrafast energy transfer from the luminescent MOF to the luminescent polymer can be achieved. The resultant MMMs exhibited an excellent modulation bandwidth of around 80 MHz, which is higher than those of most well-established color-converting phosphors commonly used for optical wireless communication. Interestingly, we found that the efficient energy transfer further improved the light communication data rate from 132 Mb/s of the pure polymer to 215 Mb/s of MMMs. This finding not only showcases the promise of the MMMs for high-speed VLC but also highlights the importance of an efficient and ultrafast energy transfer strategy for the advancement of data rates of optical wireless communication.

Homogeneously Mixing Different Metal-Organic Framework Structures in Single Nanocrystals through Forming Solid Solutions

Pore engineering plays a significant role in the applications of porous materials, especially in the area of separation and catalysis. Here, we demonstrated a metal-organic framework (MOF) solid solution (MOSS) strategy to homogeneously and controllably mix NU-1000 and NU-901 structures inside single MOF nanocrystals. The key for the homogeneous mixing and forming of MOSS was the bidentate modulator, which was designed to have a slightly longer distance between two carboxylate groups than the original tetratopic ligand. All of the MOSS nanocrystals showed a uniform pore size distribution with a well-tuned ratio of mesopores to micropores. Because of the appropriate pore ratio, MOSS nanocrystals can balance the thermodynamic interactions and kinetic diffusion of the substrates, thus showing exceedingly higher separation abilities and a unique elution sequence. Our work proposes a rational strategy to design mixed-porous MOFs with controlled pore ratios and provides a new direction to design homogeneously mixed MOFs with a high separation ability and unique separation selectivity.

Modulating Chemical Environments of Metal-Organic Framework-Supported Molybdenum(VI) Catalysts for Insights into the Structure-Activity Relationship in Cyclohexene Epoxidation

Solid supports are crucial in heterogeneous catalysis due to their profound effects on catalytic activity and selectivity. However, elucidating the specific effects arising from such supports remains challenging. We selected a series of metal-organic frameworks (MOFs) with 8-connected Zr₆ nodes as supports to deposit molybdenum(VI) onto to study the effects of pore environment and topology on the resulting Mo-supported catalysts. As characterized by X-ray absorption spectroscopy (XAS) and single-crystal X-ray diffraction (SCXRD), we modulated the chemical environments of the deposited Mo species. For Mo-NU-1000, the Mo species monodentately bound to the Zr₆ nodes were anchored in the microporous c-pore, but for Mo-NU-1008 they were bound in the mesopore of Mo-NU-1008. Both monodentate and bidentate modes were found in the mesopore of Mo-NU-1200. Cyclohexene epoxidation with H₂O₂ was probed to evaluate the support effect on catalytic activity and to unveil the resulting structure-activity relationships. SCXRD and XAS studies demonstrated the atomically precise structural differences of the Mo binding motifs over the course of cyclohexene epoxidation. No apparent structural change was observed for Mo-NU-1000, whereas the monodentate mode of Mo species in Mo-NU-1008 and the monodentate and bidentate Mo species in Mo-NU-1200 evolved to a new bidentate mode bound between two adjacent oxygen atoms from the Zr₆ node. This work demonstrates the great advantage of using MOF supports for constructing heterogeneous catalysts with modulated chemical environments of an active species and elucidating structure-activity relationships in the resulting reactions.

Superradiance and Directional Exciton Migration in Metal-Organic Frameworks

Crystalline metal-organic frameworks (MOFs) are promising synthetic analogues of photosynthetic light-harvesting complexes (LHCs). The precise assembly of linkers (organic chromophores) around the topology-defined pores offers the evolution of unique photophysical behaviors that are reminiscence of LHCs. These include MOF excited states with photoabsorbed energy that is spatially dispersed over multiple linkers defining the molecular excitons. The multilinker molecular excitons display superradiance─a hallmark of coupled oscillators seen in LHCs─with radiative rate constant (k_rad) exceeding that of a single linker. Our theoretical model and experimental results on three zirconium MOFs, namely, PCN-222(Zn), NU-1000, and SIU-100, with similar topology but varying linkers suggest that the size of such molecular excitons depends on the electronic symmetry of the linker. This multilinker exciton model effectively predicts the energy transfer rate constant; corresponding single-step exciton hopping time, ranging from a few picoseconds in SIU-100 and NU-1000 to a few hundreds of picoseconds in PCN-222(Zn), matches well with the experimental data. The model also predicts the anisotropy of exciton displacement with preferential migration along the crystallographic c-axis. Overall, these findings establish various missing links defining the exciton size and dynamics in MOF-assembled linkers. The understandings will provide design principles, especially, positioning the catalysts or electrode relative to the linker orientation for low-density solar energy conversion systems.

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. This review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

Ethylene polymerization with a crystallographically well-defined metal–organic framework supported catalyst

Crystallographic characterization of a heterogeneous ethylene polymerization catalyst elucidates a chromium–carbon bond after alkyl aluminum activation and provides mechanistic insights.

Temperature-Dependent Nitrous Oxide/Carbon Dioxide Preferential Adsorption in a Thiazolium-Functionalized NU-1000 Metal-Organic Framework

Solvent-assisted ligand incorporation (SALI) of the ditopic linker 5-carboxy-3-(4-carboxybenzyl)thiazolium bromide [(H₂PhTz)Br] into the zirconium metal-organic framework NU-1000 [Zr₆O₄(OH)₈(H₂O)₄(TBAPy)₂, where NU = Northwestern University and H₄TBAPy = 1,3,6,8-tetrakis(p-benzoic-acid)pyrene], led to the SALIed NU-1000-PhTz material of minimal formula [Zr₆O₄(OH)₆(H₂O)₂(TBAPy)₂(PhTz)]Br. NU-1000-PhTz has been thoroughly characterized in the solid state. As confirmed by powder X-ray diffraction, this material keeps the same three-dimensional architecture of NU-1000 and the dicarboxylic extra linker bridges adjacent [Zr₆] nodes ca. 8 Å far apart along the crystallographic c-axis. The functionalized MOF has a BET specific surface area of 1560 m²/g, and it is featured by a slightly higher thermal stability than its parent material (T_dec = 820 vs. 800 K, respectively). NU-1000-PhTz has been exploited for the capture and separation of two pollutant gases: carbon dioxide (CO₂) and nitrous oxide (N₂O). The high thermodynamic affinity for both gases [isosteric heat of adsorption (Q_st) = 25 and 27 kJ mol^-1 for CO₂ and N₂O, respectively] reasonably stems from the strong interactions between these (polar) "stick-like" molecules and the ionic framework. Intriguingly, NU-1000-PhTz shows an unprecedented temperature-dependent adsorption capacity, loading more N₂O in the 298 K ≤ T ≤ 313 K range but more CO₂ at temperatures falling out of this range. Grand canonical Monte Carlo simulations of the adsorption isotherms confirmed that the preferential adsorption sites of both gases are the triangular channels (micropores) in close proximity to the polar pillar. While CO₂ interacts with the thiazolium ring in an "end-on" fashion through its O atoms, N₂O adopts a "side-on" configuration through its three atoms simultaneously. These findings open new horizons in the discovery of functional materials that may discriminate between polluting gases through selective adsorption at different temperatures.

Metal-Organic Framework superstructures with long-ranged orientational order via E-field assisted liquid crystal assembly

Most MOFs are non-cubic, with functionality dependent upon crystallographic direction, and are largely prepared as microcrystalline powders. Therefore, general methods to orient and assemble free-standing MOF crystals are especially important and urgently needed. This is addressed here through the novel strategy of E-field assisted liquid crystal assembly, applied to MIL-53-NH₂(Al), MIL-68(In) and NU-1000 MOF crystals, with aspect ratios ranging from 10 to 1.2, to form highly oriented MOF superstructures which were photopolymerized to fix their long-ranged order. This new strategy for controlling MOF orientation and packing side-steps the traditional requirements of particle monodispersity, shape homogeneity and high aspect ratios (>4.7) typical of colloidal and liquid crystal assembly, and is applicable even to polydispersed MOF crystals, thereby paving the way towards the development of highly oriented MOF composites with improved functionality.

Systematic Study on the Removal of Per- and Polyfluoroalkyl Substances from Contaminated Groundwater Using Metal-Organic Frameworks

Harmful per- and polyfluoroalkyl substances (PFAS) are ubiquitously detected in aquatic environments, but their remediation remains challenging. Metal-organic frameworks (MOFs) have been recently identified as an advanced material class for the efficient removal of PFAS, but little is known about the fundamentals of the PFAS@MOF adsorption process. To address this knowledge gap, we evaluated the performance of 3 different MOFs for the removal of 8 PFAS classes from aqueous film-forming foam-impacted groundwater samples obtained from 11 U.S. Air Force installations. Due to their different pore sizes/shapes and the identity of metal node, MOFs NU-1000, UiO-66, and ZIF-8 were selected to investigate the role of MOF structures, PFAS properties, and water matrix on the PFAS@MOF adsorption process. We observed that PFAS@MOF adsorption is (i) dominated by electrostatic and acid-base interactions for anionic and non-ionic PFAS, respectively, (ii) preferred for long- over short-chain PFAS, (iii) strongly dependent on the nature of PFAS head group functionality, and (iv) compromised in the presence of ionic and neutral co-contaminants by competing for ion-exchange sites and PFAS binding. With this study, we elucidate the PFAS@MOF adsorption mechanism from complex water sources to guide the design of more efficient MOFs for the treatment of PFAS-contaminated water bodies.

Thermochemical Investigation of Oxyanion Coordination in a Zirconium-Based Metal-Organic Framework

Porous materials possess high internal surface areas and void fractions that make them valuable in several applications, including gas storage, heterogeneous catalysis, and water purification. Despite the plentiful effort allocated to porous materials research annually, few methods exist to directly monitor and characterize chemical events occurring within a pore's confines. The crystalline nature of zeolites, covalent organic frameworks (COFs), and metal-organic frameworks (MOFs) permit structural characterization by X-ray diffraction; yet, quantifying the thermodynamics of chemical processes and transformations remains tedious and error ridden. Herein, we employ isothermal titration calorimetry (ITC) to determine the full thermodynamic profile of oxyanion adsorption in a zirconium-based MOF, NU-1000. To further validate this method, which we recently introduced to the field, we replicated ITC experiments as bulk adsorption measurements to demonstrate the correlation between the extracted stoichiometric parameter from ITC thermograms and the MOF uptake capacity. Moreover, based on the calculated association constants, we accurately predicted which analytes might be able to displace others. For example, dihydrogen phosphate can displace selenate and sulfate because of its higher association constant (ΔGphosphate = -5.41 kcal/mol; ΔGselenate = -4.98 kcal/mol; ΔGsulfate = -4.77 kcal/mol). We monitored the exchange processes by titrating oxyanion-functionalized MOF samples with a more strongly binding analyte.