Hepatocyte attachment on biodegradable modified chitosan membranes: in vitro evaluation for the development of liver organoids

Recent advances in defined hydrogels in organoid research

Organoids are in vitro model systems that mimic the complexity of organs with multicellular structures and functions, which provide great potential for biomedical and tissue engineering. However, their current formation heavily relies on using complex animal-derived extracellular matrices (ECM), such as Matrigel. These matrices are often poorly defined in chemical components and exhibit limited tunability and reproducibility. Recently, the biochemical and biophysical properties of defined hydrogels can be precisely tuned, offering broader opportunities to support the development and maturation of organoids. In this review, the fundamental properties of ECM in vivo and critical strategies to design matrices for organoid culture are summarized. Two typically defined hydrogels derived from natural and synthetic polymers for their applicability to improve organoids formation are presented. The representative applications of incorporating organoids into defined hydrogels are highlighted. Finally, some challenges and future perspectives are also discussed in developing defined hydrogels and advanced technologies toward supporting organoid research.

Bioengineering Liver Organoids for Diseases Modelling and Transplantation

Organoids as three-dimension (3D) cellular organizations partially mimic the physiological functions and micro-architecture of native tissues and organs, holding great potential for clinical applications. Advances in the identification of essential factors including physical cues and biochemical signals for controlling organoid development have contributed to the success of growing liver organoids from liver tissue and stem/progenitor cells. However, to recapitulate the physiological properties and the architecture of a native liver, one has to generate liver organoids that contain all the major liver cell types in correct proportions and relative 3D locations as found in a native liver. Recent advances in stem-cell-, biomaterial- and engineering-based approaches have been incorporated into conventional organoid culture methods to facilitate the development of a more sophisticated liver organoid culture resembling a near to native mini-liver in a dish. However, a comprehensive review on the recent advancement in the bioengineering liver organoid is still lacking. Here, we review the current liver organoid systems, focusing on the construction of the liver organoid system with various cell sources, the roles of growth factors for engineering liver organoids, as well as the recent advances in the bioengineering liver organoid disease models and their biomedical applications.

Decellularized liver ECM-based 3D scaffolds: Compositional, physical, chemical, rheological, thermal, mechanical, and in vitro biological evaluations

The extracellular matrix (ECM) is involved in many critical cellular interactions through its biological macromolecules. In this study, a macroporous 3D scaffold originating from decellularized bovine liver ECM (dL-ECM), with defined compositional, physical, chemical, rheological, thermal, mechanical, and in vitro biological properties was developed. First, protocols were determined that effectively remove cells and DNA while ECM retains biological macromolecules collagen, elastin, sGAGs in tissue. Rheological analysis revealed the elastic properties of pepsin-digested dL-ECM. Then, dL-ECM hydrogel was neutralized, molded, formed into macroporous (~100-200 μm) scaffolds in aqueous medium at 37 °C, and lyophilized. The scaffolds had water retention ability, and were mechanically stable for at least 14 days in the culture medium. The findings also showed that increasing the dL-ECM concentration from 10 mg/mL to 20 mg/mL resulted in a significant increase in the mechanical strength of the scaffolds. The hemolysis test revealed high in vitro hemocompatibility of the dL-ECM scaffolds. Studies investigating the viability and proliferation status of human adipose stem cells seeded over a 2-week culture period have demonstrated the suitability of dL-ECM scaffolds as a cell substrate. Prospective studies may reveal the extent to which 3D dL-ECM sponges have the potential to create a biomimetic environment for cells.

Chitosan as an Underrated Polymer in Modern Tissue Engineering

Chitosan is one of the most well-known and characterized materials applied in tissue engineering. Due to its unique chemical, biological and physical properties chitosan is frequently used as the main component in a variety of biomaterials such as membranes, scaffolds, drug carriers, hydrogels and, lastly, as a component of bio-ink dedicated to medical applications. Chitosan's chemical structure and presence of active chemical groups allow for modification for tailoring material to meet specific requirements according to intended use such as adequate endurance, mechanical properties or biodegradability time. Chitosan can be blended with natural (gelatin, hyaluronic acid, collagen, silk, alginate, agarose, starch, cellulose, carbon nanotubes, natural rubber latex, κ-carrageenan) and synthetic (PVA, PEO, PVP, PNIPPAm PCL, PLA, PLLA, PAA) polymers as well as with other promising materials such as aloe vera, silica, MMt and many more. Chitosan has several derivates: carboxymethylated, acylated, quaternary ammonium, thiolated, and grafted chitosan. Its versatility and comprehensiveness are confirming by further chitosan utilization as a leading constituent of innovative bio-inks applied for tissue engineering. This review examines all the aspects described above, as well as is focusing on a novel application of chitosan and its modifications, including the 3D bioprinting technique which shows great potential among other techniques applied to biomaterials fabrication.

New Developments in Medical Applications of Hybrid Hydrogels Containing Natural Polymers

New trends in biomedical applications of the hybrid polymeric hydrogels, obtained by combining natural polymers with synthetic ones, have been reviewed. Homopolysaccharides, heteropolysaccharides, as well as polypeptides, proteins and nucleic acids, are presented from the point of view of their ability to form hydrogels with synthetic polymers, the preparation procedures for polymeric organic hybrid hydrogels, general physico-chemical properties and main biomedical applications (i.e., tissue engineering, wound dressing, drug delivery, etc.).

Polysaccharide Based Scaffolds for Soft Tissue Engineering Applications

Soft tissue reconstructs require materials that form three-dimensional (3-D) structures supportive to cell proliferation and regenerative processes. Polysaccharides, due to their hydrophilicity, biocompatibility, biodegradability, abundance, and presence of derivatizable functional groups, are distinctive scaffold materials. Superior mechanical properties, physiological signaling, and tunable tissue response have been achieved through chemical modification of polysaccharides. Moreover, an appropriate formulation strategy enables spatial placement of the scaffold to a targeted site. With the advent of newer technologies, these preparations can be tailor-made for responding to alterations in temperature, pH, or other physiological stimuli. In this review, we discuss the developmental and biological aspects of scaffolds prepared from four polysaccharides, viz. alginic acid (ALG), chitosan (CHI), hyaluronic acid (HA), and dextran (DEX). Clinical studies on these scaffolds are also discussed.

Long-Term Maintenance of Liver-Specific Functions in Cultured ES Cell-Derived Hepatocytes with Hyaluronan Sponge

This study investigated the three-dimensional culture of hepatocytes differentiated from mouse embryonic stem (ES) cells with a porous hyaluronan (HA) sponge support. Hepatocytes were immobilized within the pores of the support. Spheroids could be observed within the support, each containing between 20 and 50 hepatocytes. To examine the liver-specific functions of the hepatocytes in the culture, the levels of albumin secreted into the medium were analyzed. The secretion of albumin was stable over the course of 32 days, longer than that in both conventional monolayer and collagen sponge cultures. To elucidate further the liver-specific functions of hepatocytes embedded in the HA sponge, metabolic activities of the hepatocytes were examined for their ability to eliminate ammonia from culture media and the synthesis of urea nitrogen. While rates of ammonia removal and urea nitrogen synthesis were similar to those in both conventional monolayer and in collagen sponge cultures, these functions were maintained for longer duration in cells embedded in the HA sponge. These results demonstrate that the porous HA sponge is an effective support for the in vitro culture of ES-derived hepatocytes used for both basic and applied studies for cell transplantation.

Polymers for Induction of Revascularization in the Rat Fascial Flap: Application of Vascular Endothelial Growth Factor and Pancreatic Islet Cells

One of the major obstacles in transplanting avascular tissue or metabolically active cells for ischemic diseases is the loss of transplanted cells due to lack of oxygen and nutrients in the early posttransplantation period. Biodegradable polymeric tissue engineering scaffolds and hydrogels have a potential to incorporate cells or cellular organoids such as islets of Langerhans and growth factors. In this study, we tested the efficiency of two types of polymeric materials to carry recombinant human vascular endothelial growth factor (rhVEGF) or pancreatic tumor cell lines, namely Ins-1 and AR42J, for the induction of new vessels. Chitosan hydrogel fibers with micropores were prepared and molded into a cylinder construct (5 mm φ 8 mm height). Macroporous PLGA scaffolds with a pore size of 250–400 μm were prepared and cut into cylinders (6 mm φ 3 mm height). Both chitosan and PLGA constructs were loaded with rhVEGF (3 μg) or seeded with the cell lines (5 × 105 cells and 3 × 105 cells/construct, respectively, for AR42J and INS-1 cells), and transplanted into the fascial flaps of Wistar rats. At distinct time points up to 4 weeks postimplantation, polymers were explanted, fixed, and vessel density was counted on sections stained with anti-Factor-VIII antibody. Additionally, the kinetics of rhVEGF release from PLGA microspheres (φ of 50–80 μm) was determined using VEGF Elisa. Endogenous VEGF release from pancreatic rat cell lines was also determined. Light microscopy study was performed on H&E-stained paraffin sections of the islet-polymer samples. The vascular density of rhVEGF-loaded chitosan constructs was increased fourfold 2 weeks after subcutaneous transplantation compared with rhVEGF-unloaded controls (465 ± 144 vs. 104 ± 80 vessels per mm2, p < 0.05). Protein leakage occurred, but was not observed after 2 weeks. Higher insulin content was detected in rat islet grafts transplanted following VEGF application. More than 50% of total rhVEGF was released on the first day of in vitro culture of PLGA microspheres. rhVEGF secretion had another, but smaller, peak on the third day followed by a constant release. By comparison, endogeneous VEGF secretion of pancreatic tumor cells was measured within a 3-day culture period. Biodegradable polymer scaffolds and hydrogels may have potential use as solid supports to induce angiogenesis for pancreatic cell transplantation.

Development of hepatic blocks using human adipose tissue-derived stem cells through three-dimensional cell printing techniques

Currently, most acute liver diseases are treated through liver transplantation.

Preparation of three-dimensional macroporous chitosan-gelatin B microspheres and HepG2-cell culture

Chitosan-gelatin B microspheres with an open, interconnected, highly macroporous (100-200 µm) structure were prepared via a three-step protocol combining freeze-drying with an electrostatic and ionic cross-linking method. Saturated tripolyphosphate ethanol solution (85% ethanol) was chosen as the crosslinking agent to prevent destruction of the porous structure and to improve the biostability of the chitosan-gelatin B microspheres, with N-(3-dimethylaminopropyl)-N'-ethyl-carbodiimide/N-hydroxysuccinimide as a second crosslinking agent to react with gelatin A and fixed chitosan-gelatin B microspheres to attain improved biocompatibility. Water absorption of the three-dimensional macroporous chitosan-gelatin B microspheres (3D-P-CGMs) was 12.84, with a porosity of 85.45%. In vitro lysozyme degradation after 1, 3, 5, 7, 10, 14, and 21 days showed improved biodegradation in the 3D-P-CGMs. The morphology of human hepatoma cell lines (HepG2 cells) cultured on the 3D-P-CGMs was spherical, unlike that of cells cultured under traditional two-dimensional conditions. Scanning electron microscopy and paraffin sections were used to confirm the porous structure of the 3D-P-CGMs. HepG2 cells were able to migrate inside through the pore. Cell proliferation and levels of albumin and lactate dehydrogenase suggested that the 3D-P-CGMs could provide a larger specific surface area and an appropriate microenvironment for cell growth and survival. Hence, the 3D-P-CGMs are eminently suitable as macroporous scaffolds for cell cultures in tissue engineering and cell carrier studies. Copyright © 2014 John Wiley & Sons, Ltd.

Biomaterials for liver tissue engineering

Liver extracellular matrix (ECM) composition, topography and biomechanical properties influence cell-matrix interactions. The ECM presents guiding cues for hepatocyte phenotype maintenance, differentiation and proliferation both in vitro and in vivo. Current understanding of such cell-guiding cues along with advancement of techniques for scaffold fabrication has led to evolution of matrices for liver tissue culture from simple porous scaffolds to more complex 3D matrices with microarchitecture similar to in vivo. Natural and synthetic polymeric biomaterials fabricated in different topographies and porous matrices have been used for hepatocyte culture. Heterotypic and homotypic cell interactions are necessary for developing an adult liver as well as an artificial liver. A high oxygen demand of hepatocytes as well as graded oxygen distribution in liver is another challenging attribute of the normal liver architecture that further adds to the complexity of engineered substrate design. A balanced interplay of cell-matrix interactions along with cell-cell interactions and adequate supply of oxygen and nutrient determines the success of an engineered substrate for liver cells. Techniques devised to incorporate these features of hepatic function and mimic liver architecture range from maintaining liver cells in mm-sized tailor-made scaffolds to a more bottoms up approach that starts from building the microscopic subunit of the whole tissue. In this review, we discuss briefly various biomaterials used for liver tissue engineering with respect to design parameters such as scaffold composition and chemistry, biomechanical properties, topography, cell-cell interactions and oxygenation.

In vitro evaluation of encapsulated primary rat hepatocytes pre- and post-cryopreservation at -80°C and in liquid nitrogen

Encapsulation techniques have the potential to protect hepatocytes from cryoinjury. In this study, we comparatively evaluated the viability and metabolic function of primary rat hepatocytes encapsulated in calcium alginate microbeads, in chitosan tripolyphosphate beads, and in three-layered alginate-chitosan-alginate (ACA) microcapsules, before and after cryopreservation at -80°C and in liquid nitrogen (LN2) for 1 and 3 months. Findings demonstrated that LN2 was atop of -80°C in regard to preservation of viability (> 90%) and hepatic functions. LN2-cryopreserved hepatocytes encapsulated in ACA microcapsules retained metabolic function post-thawing, with > 90% of the albumin, total protein and urea syntheses activities, and > 80% of oxidative function.

Liver regenerative medicine: advances and challenges

Liver transplantation is the standard care for many end-stage liver diseases. However, donor organs are scarce and some people succumb to liver failure before a donor is found. Liver regenerative medicine is a special interdisciplinary field of medicine focused on the development of new therapies incorporating stem cells, gene therapy and engineered tissues in order to repair or replace the damaged organ. In this review we consider the emerging progress achieved in the hepatic regenerative medicine within the last decade. The review starts with the characterization of liver organogenesis, fetal and adult stem/progenitor cells. Then, applications of primary hepatocytes, embryonic and adult (mesenchymal, hematopoietic and induced pluripotent) stem cells in cell therapy of liver diseases are considered. Current advances and challenges in producing mature hepatocytes from stem/progenitor cells are discussed. A section about hepatic tissue engineering includes consideration of synthetic and natural biomaterials in engineering scaffolds, strategies and achievements in the development of 3D bioactive matrices and 3D hepatocyte cultures, liver microengineering, generating bioartificial liver and prospects for fabrication of the bioengineered liver.

Membranes for biohybrid liver support: the behaviour of C3A hepatoblastoma cells is dependent on the composition of acrylonitrile copolymers

Co-polymers based on acrylonitrile, N-vinylpyrrolidone, aminoethylmethacrylate and sodium methallylsulfonate were used to prepare flat membranes by phase inversion. The surface properties of membranes were characterised by water contact angle measurements, atomic force microscopy and X-ray photoelectron spectroscopy (XPS). Membrane permeability was estimated by porosity measurements with water as test liquid. Human C3A hepatoblastoma cells were plated on these materials. Cell-material interaction was characterised by overall cell morphology, formation of focal adhesion contacts and intercellular junctions. Furthermore, cell proliferation was measured and compared with the functional activity of cells as indicated by 7-ethoxycoumarin-O-deethylation. More hydrophilic materials reduced spreading of cells, formation of focal adhesion and subsequent proliferation while homotypic cell adhesion was facilitated in correlation with stronger expressions of intercellular junctions and improved functional activity. In contrast, membranes with stronger adhesivity enhanced cell proliferation but reduced the functional activity of cells. It was concluded that the co-polymerisation of acrylonitrile with hydrophilic co-monomers, such as N-vinylpyrrolidone, could be used to tailor membrane materials for the application in biohybrid liver support systems.

Alginate beads as immobilization matrix for hepatocytes perfused in a bioreactor: a physico-chemical characterization

Because of their peculiar physico-chemical properties, alginate beads have often been proposed as an alternative cell immobilization matrix for many biotechnological applications. For entrapped hepatocytes perfused in a bioreactor, alginate beads have been demonstrated to promote viability and three-dimensional cell organization. In order to optimise the hepatocyte cell culture, we investigated the relationship between alginate beads properties, at high and low content of guluronic acid (G), and the relative cell viability and reorganization when perfused in a bioreactor. The primary structure of alginates did not apparently influence the hepatocytes culture in 8 h of perfusion in a bioreactor. However, our results confirm a preference for beads with a high content of G due to their superior mechanical resistance.

Energy metabolism and re-establishment of intercellularadhesion complexes of gel entrapped hepatocytes

We studied the effect of continuous medium flow on the viabilityand structural organization of hepatocytes high density entrapped inalginate gel beads in the first few hours after isolation.The metabolic energy status of the entrapped cells, monitored invivo by (31)P NMR spectroscopy, was stable during theexperimental time and a physiological redox ratio was reachedafter the first three hours of culture. The morphologicalanalysis revealed that the entrapped hepatocytes placed in a fixed-bed bioreactor under continuous flow showed a polyhedricalshape with numerous microvilli on cell surface and reconstitutedtight junctions as well as bile canalicular structures, closelyresembling those present in the liver.These results suggest that continuous flow allows the culture ofhepatocytes at very high cell density within a matrix withoutloss of viability and accelerates cellular tissue reconstructionat very short times after isolation. This type of culture couldrepresent a very useful model for physiological andtoxicological studies as well as a promising approach toward thedevelopment of a bioartificial hybrid support device in acuteliver failure.

Neovascularization by bFGF releasing hyaluronic acid-gelatin microspheres: in vitro and in vivo studies

Therapeutic angiogenesis with angiogenic growth factors has been described as a promising approach for tissue engineering, wound healing, and for treating ischemic tissues. Here, we assessed the merit of heparin-entrapped hyaluronic acid-gelatin (HA-G) microspheres for the sustained release of recombinant basic fibroblast growth factor (rbFGF) to promote localized neovascularization. HA-G microspheres were prepared by a water-in-oil emulsion method, and the in vitro release kinetics were first examined using three model proteins. Then, bFGF was incorporated into microspheres, and the bioactivity of the in vitro-released rbFGF was tested on human umbilical vein endothelial cell cultures. The ability to promote microvessel growth was assessed in vivo, at the subcutaneous groin fascia of Wistar rats after 3, 7, 14, and 21 days. Histological and morphometrical analysis indicated that heparin-entrapped HA-G microspheres have the capacity to release bioactive rbFGF, leading to localized neovascularization in the rat subcutaneous tissue.

On the biomechanical function of scaffolds for engineering load-bearing soft tissues

Replacement or regeneration of load-bearing soft tissues has long been the impetus for the development of bioactive materials. While maturing, current efforts continue to be confounded by our lack of understanding of the intricate multi-scale hierarchical arrangements and interactions typically found in native tissues. The current state of the art in biomaterial processing enables a degree of controllable microstructure that can be used for the development of model systems to deduce fundamental biological implications of matrix morphologies on cell function. Furthermore, the development of computational frameworks which allow for the simulation of experimentally derived observations represents a positive departure from what has mostly been an empirically driven field, enabling a deeper understanding of the highly complex biological mechanisms we wish to ultimately emulate. Ongoing research is actively pursuing new materials and processing methods to control material structure down to the micro-scale to sustain or improve cell viability, guide tissue growth, and provide mechanical integrity, all while exhibiting the capacity to degrade in a controlled manner. The purpose of this review is not to focus solely on material processing but to assess the ability of these techniques to produce mechanically sound tissue surrogates, highlight the unique structural characteristics produced in these materials, and discuss how this translates to distinct macroscopic biomechanical behaviors.

Microfluidic synthesis of pure chitosan microfibers for bio-artificial liver chip

We developed microfluidic-based pure chitosan microfibers (approximately 1 meter long, 70-150 microm diameter) for liver tissue engineering applications. Despite the potential of the chitosan for creating bio-artificial liver chips, its major limitation is the inability to fabricate pure chitosan-based microstructures with controlled shapes because of the mechanical weakness of the pure chitosan. Previous studies have shown that chitosan micro/nanofibers can be fabricated by using chemicals and electrospinning techniques. However, there is no paper regarding pure chitosan-based microfibers in a microfluidic device. This paper suggests a unique method to fabricate pure chitosan microfibers without any chemical additive. We also analyzed the chemical, mechanical, and diffusion properties of pure chitosan microfibers. Attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectrometry and electron spectroscopy for chemical analysis (ESCA) were used to analyze the chemical composition of the synthesized chitosan microfibers. We measured the mechanical axial-force and diffusion coefficient in pure chitosan-based microfibers using fluorescence recovery after photobleaching (FRAP) techniques. Furthermore, to evaluate the capability of the microfibers for liver tissue formation, hepatoma HepG2 cells were seeded onto the chitosan microfibers. The functionality of these hepatic cells cultured on chitosan microfibers was analyzed by measuring albumin secretion and urea synthesis. Therefore, this pure chitosan-based microfiber chip could be a potentially useful method for liver tissue engineering applications.

Three-dimensional culture of human embryonic stem cell derived hepatic endoderm and its role in bioartificial liver construction

The liver carries out a range of functions essential for bodily homeostasis. The impairment of liver functions has serious implications and is responsible for high rates of patient morbidity and mortality. Presently, liver transplantation remains the only effective treatment, but donor availability is a major limitation. Therefore, artificial and bioartificial liver devices have been developed to bridge patients to liver transplantation. Existing support devices improve hepatic encephalopathy to a certain extent; however their usage is associated with side effects. The major hindrance in the development of bioartificial liver devices and cellular therapies is the limited availability of human hepatocytes. Moreover, primary hepatocytes are difficult to maintain and lose hepatic identity and function over time even with sophisticated tissue culture media. To overcome this limitation, renewable cell sources are being explored. Human embryonic stem cells are one such cellular resource and have been shown to generate a reliable and reproducible supply of human hepatic endoderm. Therefore, the use of human embryonic stem cell-derived hepatic endoderm in combination with tissue engineering has the potential to pave the way for the development of novel bioartificial liver devices and predictive drug toxicity assays.

Approaches to heart valve tissue engineering scaffold design

Heart valve disease is a significant cause of mortality worldwide. However, to date, a nonthrombogenic, noncalcific prosthetic, which maintains normal valve mechanical properties and hemodynamic flow, and exhibits sufficient fatigue properties has not been designed. Current prosthetic designs have not been optimized and are unsuitable treatment for congenital heart defects. Research is therefore moving towards the development of a tissue engineered heart valve equivalent. Two approaches may be used in the creation of a tissue engineered heart valve, the traditional approach, which involves seeding a scaffold in vitro, in the presence of specific signals prior to implantation, and the guided tissue regeneration approach, which relies on autologous reseeding in vivo. Regardless of the approach taken, the design of a scaffold capable of supporting the growth of cells and extracellular matrix generation and capable of withstanding the unrelenting cardiovascular environment while forming a tight seal during closure, is critical to the success of the tissue engineered construct. This paper focuses on the quest to design, such a scaffold.

Formation and characterization of three dimensional human hepatocyte cell line spheroids on chitosan matrix for in vitro tissue engineering applications

Chitosan was used as a matrix to induce three-dimensional spheroids of HepG2 cells. Chitosan films were prepared and used for culturing Hep G2 cells. Attachment kinetics of the cells was studied on the chitosan films. The optimum seeding density of the Hep G2 cells, required for three-dimensional spheroid formation was determined and was found to be 5 x 10(4)/ml. The growth kinetics of Hep G2 cells was studied using (3-(4, 5-Dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide) (MTT) assay, and morphology of the cells was studied through optical photographs taken at various days of culture. The liver cell functions of the spheroids were determined by measuring albumin and urea secretions. The results obtained from these studies have shown that the culture of Hep G2 cells on chitosan matrix taking appropriate seeding density resulted in the formation of three-dimensional spheroids and exhibited higher amount of albumin and urea synthesis compared to monolayer culture. These miniature "liver tissue like" models can be used for in vitro tissue engineering applications like preliminary evaluation of the toxicity of drugs and chemicals.

Encapsulation and osteoinduction of human periodontal ligament fibroblasts in chitosan–hydroxyapatite microspheres

Periodontal ligament cells play a crucial role in the regeneration of periodontal tissues and an undifferentiated mesenchymal cell subset is thought to exist within this population. The aim of this study was to assess the osteogenic differentiation potential of human periodontal ligament fibroblasts (hPDLFs) in three dimensional (3D)-osteogenic culture environment following encapsulation in chitosan-hydroxyapatite (C/HA) microspheres with the size range of 350-450 microm. Human PDLF cultures were established and three experimental groups were formed: (i) two-dimensional (2D)-culture as single cell monolayer, (ii) 3D-static culture of C/HA encapsulated hPDLFs, and (iii) 3D-dynamic culture of C/HA encapsulated hPDLFs in a rotating wall vessel bioreactor. The cells were cultured in standard culture medium supplemented with beta-glycerophosphate, dexamethasone, and ascorbic acid. After 21 days, immunohistochemistry was performed using antibodies against osteonectin, osteopontin, bone-sialoprotein, and osteocalcin as osteogenic differentiation markers. Phase-contrast and scanning electron microscopy observations were used for histological and morphological evaluation. The combined effects of osteoinductive medium and HA-containing composite microsphere material on encapsulated hPDLFs resulted in the transformation of a considerable portion of the cells into osteoblastic lineage at the end of the experiments. Results demonstrate the ability of hPDLFs to undergo osteogenic differentiation upon induction in vitro, both under 2D and 3D culture conditions. C/HA microspheres in microgravity bioreactor may serve as a suitable 3D environment to support the osteogenic differentiation of human PDLFs, in vitro.

Patterned co-culture of primary hepatocytes and fibroblasts using polyelectrolyte multilayer templates

This paper describes the formation of patterned cell co-cultures using the layer-by-layer deposition of synthetic ionic polymers and without the aid of adhesive proteins/ligands such as collagen or fibronectin. In this study, we used synthetic polymers, namely poly(diallyldimethylammonium chloride) (PDAC) and sulfonated polystyrene (SPS) as the polycation and polyanion, respectively, to build the multilayer films. We formed SPS patterns on polyelectrolyte multilayer (PEM) surfaces either by microcontact printing PDAC onto SPS surfaces or vice-versa. To create patterned co-cultures on PEMs, we capitalize on the preferential attachment and spreading of primary hepatocytes on SPS as opposed to PDAC surfaces. In contrast, fibroblasts readily attached to both PDAC and SPS surfaces, and as a result, we were able to obtain patterned co-cultures of fibroblast and primary hepatocytes on synthetic PEM surfaces. We characterized the morphology and hepatic-specific functions of the patterned cell co-cultures with microscopy and biochemical assays. Our results suggest an alternative approach to fabricating controlled co-cultures with specified cell-cell and cell-surface interactions; this approach provides flexibility in designing cell-specific surfaces for tissue engineering applications.

Evaluation of Modified CMC and CMC-PVA as Miscible Polymer Blend Membranes for Hepatocytes

CMC and CMC-PVA were blended either with type I collagen, BSA or CS to obtain biocompatible membranes for evaluation as potential hepatocyte culture substrates. Pure and modified forms of CMC showed distinct surface, mechanical, and cell attachment properties. While the hydrophilicity decreased, the mechanical stability and the porosity of CMC membranes increased after blending. Serum proteins were adsorbed by all types of membranes. Among eight membranes tested, collagen-modified CMC was found to be a suitable membrane material for hepatocyte culture, in terms of mechanical and cell interaction properties.

Micromolding of photocrosslinkable chitosan hydrogel for spheroid microarray and co-cultures

Bioengineering approaches, such as co-cultures of multiple cell types, that aim to mimic the physiological microenvironment may be beneficial for optimizing cell function and for engineering tissues in vitro. This study describes a novel method for preparing a spheroid microarray on microfabricated hydrogels, alone or in co-cultures. Photocrosslinkable chitosan was synthesized and utilized for fabricating hydrogel microstructures through a micromolding process. The chitosan surface was initially cell repellent but became increasingly cell adhesive over time. By using this unique property of chitosan hydrogels, it was possible to generate patterned co-cultures of spheroids and support cells. In this scheme, cells were initially microarrayed within low shear stress regions of microwells. Human hepatoblastoma cells, Hep G2, seeded in these wells formed spheroids with controlled sizes and shapes and stably secreted albumin during the culture period. The change of cell adhesive properties in the chitosan surface facilitated the adhesion and growth of a second cell type, NIH-3T3 fibroblast, and therefore enabled co-cultures of hepatocyte spheroids and fibroblast monolayers. This co-culture system could be a useful platform for studying heterotypic cell-cell interactions, for drug screening, and for developing implantable bioartificial organs.

Factors influencing stem cell differentiation into the hepatic lineage in vitro

A major area of research in transplantation medicine is the potential application of stem cells in liver regeneration. This would require well-defined and efficient protocols for directing the differentiation of stem cells into the hepatic lineage, followed by their selective purification and proliferation in vitro. The development of such protocols would reduce the likelihood of spontaneous differentiation of stem cells into divergent lineages upon transplantation, as well as reduce the risk of teratoma formation in the case of embryonic stem cells. Additionally, such protocols could provide useful in vitro models for studying hepatogenesis and liver metabolism. The development of pharmokinetic and cytotoxicity/genotoxicity screening tests for newly developed biomaterials and drugs, could also utilize protocols developed for the hepatic differentiation of stem cells. Hence, this review critically examines the various strategies that could be employed to direct the differentiation of stem cells into the hepatic lineage in vitro.

Cellular therapies for liver replacement

Insufficient donor organs for orthotopic liver transplantation worldwide have urgently increased the requirement for new therapies for acute and chronic liver disease. Whilst none are yet clinically proven there are at least two different approaches for which there is extensive experimental data, some human anecdotal evidence and some data emerging from Phase 1 clinical trials. Both approaches involve bio-engineering. In vivo tissue engineering involves isolated liver cell transplantation into the liver and/or other ectopic sites and in vitro tissue engineering, using an extracorporeal hepatic support system or bioartificial liver. Some questions are common to both these approaches, such as the best cell source and the therapeutic mass required, and are discussed. Others are specific to each approach. For cell transplantation in vivo the initial engraftment and repopulation will make a critical difference to the outcome, and development of markers for transplanted cells has enabled significant advances in understanding, and therefore manipulating, the process. Moreover, the role of immunosuppression is also important and novel approaches to natural immunosuppression are discussed. For use in a bioartificial liver, the ability for hepatocytes to perform ex vivo at in vivo levels is critical. Three dimensional culture improves cell performance over monolayer cultures. Alginate encapsulated cells offer a suitable 3-D environment for a bioartificial liver since they are both easily manipulatable and cryopreservable. The use of cells derived from stem cells or foetal rather than adult liver cells is also emerging as a potential human cell source which may overcome problems associated with xenogeneic cells.

Hydrogel-coated textile scaffolds as candidate in liver tissue engineering: II. Evaluation of spheroid formation and viability of hepatocytes

In this study we evaluate the performance of primary rat hepatocytes and HepG2 cells on chitosan-collagen hydrogel-coated textile scaffolds. Light microscopy and electron microscopic observations showed attachment and aggregate formation tendency of hepatocytes on the scaffolds. As tested by the tetrazolium reduction (MTT) assay it was evident that cells had preserved mitochondrial functionality. It was also observed that pure collagen and collagen blended scaffolds allowed higher cell growth than pure chitosan scaffold. Fluorescent live/dead staining showed a metabolically active, viable cell population on all scaffold compositions with occurrence of few dead cells. Cell functionality was confirmed by secretion of albumin, which was maintained throughout culture period. Take collectively our results suggests that hydrogel-coated textile scaffolds could be promising for tissue-engineering applications, as they allow favorable hepatocyte attachment, spheroid formation and maintenance of function. These scaffolds could be useful for co-culturing hepatocytes and non-parenchymal endothelial cells in bioartificial liver support systems.

Formation of defined microporous 3D structures starting from cross-linked hydrogels

A new and simple technique was developed to obtain polysaccharide (hyaluronane, alginate and carboxymethylcellulose) -based hydrogels with a defined porous morphology. The technique consists of stratifying a cross-linked hydrogel on a filter with known pore diameter. CO(2) bubbles, produced by the addition of HCl to a porogen salt NaHCO(3), are forced to pass through the filter, and they induce the hydrogel to assume a porous morphology. The presence and distribution of pores was confirmed by scanning-electron microscopy (SEM). A strict correspondence was found between the porosity of the filter and the pore diameter in the hydrogels. Water uptake measurements showed a decreased amount of water taken up by the porous hydrogels compared with the native hydrogels, due to a compacting of the material. An explanation of the porous material properties of Hyal hydrogel was given on the basis of FTIR spectra.

Adhesive protein interactions with chitosan: Consequences for valve endothelial cell growth on tissue-engineering materials

Stable endothelialization of a tissue-engineered heart valve is essential for proper valve function, although adhesive characteristics of the native valve endothelial cell (VEC) have rarely been explored. This research evaluated VEC adhesive qualities and attempted to enhance VEC growth on the biopolymer chitosan, a novel tissue-engineering scaffold material with promising biological and chemical properties. Aortic VEC cultures were isolated and found to preferentially adhere to fibronectin, collagen types IV and I over laminin and osteopontin in a dose-dependent manner. Seeding of VEC onto comparison substrates revealed VEC growth and morphology to be preferential in the order: tissue culture polystyrene > gelatin, poly(DL-lactide-co-glycolide), chitosan > poly(hydroxy alkanoate). Adhesive protein precoating of chitosan did not significantly enhance VEC growth, despite equivalent protein adsorption as to polystyrene. Initial cell adhesion to protein-precoated chitosan, however, was higher than for polystyrene. Composite chitosan/collagen type IV films were investigated as an alternative to simple protein precoatings, and were shown to improve VEC growth and morphology over chitosan alone. These findings suggest potential manipulation of chitosan properties to improve amenability to valve tissue-engineering applications.

Studies on nerve cell affinity of biodegradable modified chitosan films

Chitosan, a natural polysaccharide that has excellent biocompatibility and biodegradability, can be used as nerve conduit material. The purpose of this work was to study the ability of chitosan and some chitosan-derived materials to facilitate nerve cell attachment, differentiation and growth. The biomaterials studied were chitosan, poly-L-lysine-blended chitosan (CP), collagen-blended chitosan (CC) and albumin-blended chitosan (CA), with collagen control material. Culture of PC12 cells and fetal mouse cerebral cortex (FMCC) cells on these biomaterials was used to evaluate their nerve cell affinity. The composite materials, including CP, CC and CA, had significantly improved nerve cell affinity compared to chitosan, as established by increasing attachment, differentiation and growth of PC12 cells. FMCC cells could also grow better on composite materials than on chitosan. CP exhibited the best nerve cell affinity among these three types of composite material. CP is an even better material in promoting neurite outgrowth than collagen, a substrate that is widely used in tissue engineering, suggesting that CP is a promising candidate material for nerve regeneration.