Activity of commercial enzymes on settlement and adhesion of cypris larvae of the barnacle Balanus amphitrite, spores of the green alga Ulva linza, and the diatom Navicula perminuta

Antifouling activities of proteinase K and α-amylase enzymes: Laboratory bioassays and in silico analysis

The application of enzymes as antifoulants is one of the environment-friendly strategies in biofouling management. In this study, antifouling activities of commercially available proteinase K and α-amylase enzymes were evaluated using barnacle larva and biofilm-forming bacteria as test organisms. The enzymes were also tested against barnacle cement protein through in silico analysis. The results showed that both enzymes inhibited the attachment of bacteria and settlement of barnacle larvae on the test surface. The lowest minimum inhibitory concentration of 0.312 mg ml-1 was exhibited by proteinase K against biofilm-forming bacteria. The calculated LC50 values for proteinase K and α-amylase against the barnacle nauplii were 91.8 and 230.96 mg ml-1 respectively. While α-amylase showed higher antibiofilm activity, proteinase K exhibited higher anti-larval settlement activity. Similarly, in silico analysis of the enzymes revealed promising anti-settlement activity, as the enzymes showed good binding scores with barnacle cement protein. Overall, the results suggested that the enzymes proteinase K and α-amylase could be used in antifouling coatings to reduce the settlement of biofouling on artificial materials in the marine environment.

Exploring fishery waste potential as antifouling component

Marine biofouling is a global issue with economic and ecological implications. Existing solutions, such as biocide-based antifouling paints, are toxic for the environment. The search for better antifouling agents remains crucial. Recent research focuses on eco-friendly antifouling paints containing natural compounds like enzymes. This study evaluates enzymatic extracts from fishery residues for antifouling potential. Extracts from Pleoticus muelleri shrimp, Illex argentinus squid, and Lithodes santolla king crab were analyzed. Proteolytic activity and thermal stability were assessed, followed by bioassays on mussel byssus thread formation and barnacle cypris adhesive footprints. All three extracts demonstrated proteolytic activity and 24-h stability at temperate oceanic temperatures, except I. argentinus. P. muelleri extracts hindered cyprid footprint formation and mussel byssus thread generation. Further purification is required for L. santolla extract to assess its antifouling potential activity. This study introduces the use of fishery waste-derived enzyme extracts as a novel antifouling agent, providing a sustainable tool to fight against biofouling formation.

Application of enzymes for targeted removal of biofilm and fouling from fouling-release surfaces in marine environments: A review

Biofouling causes adverse issues in underwater structures including ship hulls, aquaculture cages, fishnets, petroleum pipelines, sensors, and other equipment. Marine constructions and vessels frequently are using coatings with antifouling properties. During the previous ten years, several alternative strategies have been used to combat the biofilm and biofouling that have developed on different abiotic or biotic surfaces. Enzymes have frequently been suggested as a cost-effective, substitute, eco-friendly, for conventional antifouling and antibiofilm substances. The destruction of sticky biopolymers, biofilm matrix disorder, bacterial signal interference, and the creation of biocide or inhibitors are among the catalytic reactions of enzymes that really can successfully prevent the formation of biofilms. In this review we presented enzymes that have antifouling and antibiofilm properties in the marine environment like α-amylase, protease, lysozymes, glycoside hydrolase, aminopeptidases, oxidase, haloperoxidase and lipases. We also overviewed the function, benefits and challenges of enzymes in removing biofouling. The reports suggest enzymes are good candidates for marine environment. According to the findings of a review of studies in this field, none of the enzymes were able to inhibit the development of biofilm by a site marine microbial community when used alone and we suggest using other enzymes or a mixture of enzymes for antifouling and antibiofilm purposes in the sea environment.

Impact of different enzymes on biofilm formation and mussel settlement

Enzymes have been known to impact the biofilm forming capacity. However, how the enzymes mediate the biofilm formation and macrofouling remains little known. Here, we investigated the effects of the three kinds of proteases, four kinds of glycosidases and one kind of lipase on the detachment of biofilms of Shewanella marisflavi ECSMB14101, identified biofilm total proteins response to enzyme treatments, and then tested the effects of biofilms treated with enzymes on the settlement of the mussel Mytilus coruscus plantigrades. The results showed that the cell density of bacteria in biofilms formed at different initial bacterial density were noticeably reduced after treating with all tested enzymes, and Neutrase and α-Amylase exhibited best removing efficiency of > 90%. Bacterial total proteins in S. marisflavi biofilm noticeably reduced or disappeared after treated by Alcalase. For the settlements of the mussel M. coruscus plantigrades, inducing capacities of S. marisflavi biofilm were noticeably suppressed and downregulation was > 75% at the initial density of 5 × 10⁶ cells/cm². Thus, the tested enzymes could effectively remove the adhered bacterial cell, inhibit the biofilm formation and finally suppress the mussel settlement. Our findings extend novel knowledge to developing eco-friendly approach to control micro- and macro-fouling.

Isolation, characterization and identification of antibiofouling metabolite from mangrove derived Streptomyces sampsonii PM33

In this study, we report the production, bioassay guided isolation and identification of antibiofouling metabolite from mangrove derived actinobacterium, Streptomyces sampsonii (PM33). The actinobacterial strain PM33 yields maximum amount of antifouling compounds through agar surface fermentation. In optimization, carbohydrates such as glucose, fructose and xylose, are suitable for maximum production of the active compound. In addition, other compounds such as malt extract, glutamine, and sodium chloride concentrations (2.5, 5 and 7.5%) and parameters such as pH 7.0 and temperature range 30 °C to 40 °C enhanced the production of antifouling metabolite. The antifouling metabolite was extracted in ethyl acetate. TLC and bioautography was used to separate and detect the antifouling metabolite present in the crude extract. The physico chemical features revealed that the antifouling metabolite PM33 – B as taxifolin (C₁₅H₁₂O₇). The purified taxifolin was found to be active against biofouling bacteria, algal spore germination and mollusc foot adherence, respectively. Toxicity nature of taxifolin was also determined by adopting zebrafish embryos. The taxifolin isolated from mangrove-derived Streptomyces sampsonii PM33 is a promising candidate for the development of eco-friendly antifouling preparation.

Designing a Laboratory Bioassay for Evaluating the Efficacy of Antifouling Paints on Amphibalanus amphitrite Using a Flow-Through System

With the aim of establishing a protocol for evaluating the efficacy of antifouling paints on different organisms, a flow-through laboratory test using triangular boxes was developed for cyprids of the barnacle Amphibalanus (=Balanus) amphitrite. Six different formulations of antifouling paints were prepared in increasing content (0 to 40 wt.%) of Cu2O, which is the most commonly used antifouling substance, and each formulation of paint was coated on one surface of each test plate. The test plates were aged for 45 days by rotating them at a speed of 10 knots inside a cylinder drum with continuously flowing seawater. The settlement behavior of 3-day-old cyprids released inside triangular boxes made from the test plates was observed. A decreasing number of juveniles settled on surfaces of test plates that were coated with paint containing more than 30 wt.% of Cu2O. Results of the laboratory bioassays were consistent with those from the field experiments.

Extracellular polymeric substances, a key element in understanding biofilm phenotype

One of the key elements in the establishment and maintenance of the biofilm structure and properties is the extracellular matrix. The extracellular matrix is composed of water and extracellular polymeric substances (EPS): primarily polysaccharides, proteins and DNA. Characterization of the matrix requires component identification, as well as determination of the relative concentration of EPS constituents, including their physicochemical properties and descriptions of their interactions. Several types of experimental approaches with varying degrees of destructiveness can be utilized for this characterization. The analysis of biofilm by infrared spectroscopy gives information about the chemical content of the matrix and the proportions of different EPS. The sensitivity of a biofilm to hydrolytic enzymes targeting different EPS gives insight into the composition of the matrix and the involvement of matrix components in the integrity of the structure. Using both chemical and physical treatments, extraction and purification of EPS from the biofilm also provides a means of determining matrix composition. Purified and/or artificial EPS can be used to obtain artificial matrices and to study their properties. Using examples from the literature, this review will illustrate selected technologies useful in the study of EPS that provide a better understanding of the structure-function relationships in extracellular matrix, and thus the structure-function relationships of the biofilm phenotype.

Insights into the Interactions of Amino Acids and Peptides with Inorganic Materials Using Single-Molecule Force Spectroscopy

The interactions between proteins or peptides and inorganic materials lead to several interesting processes. For example, combining proteins with minerals leads to the formation of composite materials with unique properties. In addition, the undesirable process of biofouling is initiated by the adsorption of biomolecules, mainly proteins, on surfaces. This organic layer is an adhesion layer for bacteria and allows them to interact with the surface. Understanding the fundamental forces that govern the interactions at the organic-inorganic interface is therefore important for many areas of research and could lead to the design of new materials for optical, mechanical and biomedical applications. This paper demonstrates a single-molecule force spectroscopy technique that utilizes an AFM to measure the adhesion force between either peptides or amino acids and well-defined inorganic surfaces. This technique involves a protocol for attaching the biomolecule to the AFM tip through a covalent flexible linker and single-molecule force spectroscopy measurements by atomic force microscope. In addition, an analysis of these measurements is included.

Antialgal activity of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes against the marine alga Ulva

Marine biofouling has detrimental effects on the environment and economy, and current antifouling coatings research is aimed at environmentally benign, non-toxic materials. The possibility of using contact-active coatings is explored, by considering the antialgal activity of cationic poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes. The antialgal activity was investigated via zoospore settlement and sporeling growth assays of the marine algae Ulva linza and U. lactuca. The assay results for PDMAEMA brushes were compared to those for anionic and neutral surfaces. It was found that only PDMAEMA could disrupt zoospores that come into contact with it, and that it also inhibits the subsequent growth of normally settled spores. Based on the spore membrane properties, and characterization of the PDMAEMA brushes over a wide pH range, it is hypothesized that the algicidal mechanisms are similar to the bactericidal mechanisms of cationic polymers, and that further development could lead to successful contact-active antialgal coatings.

Antibiofouling potential of quercetin compound from marine-derived actinobacterium, Streptomyces fradiae PE7 and its characterization

An attempt has been made to isolate, purify and characterize antifouling compound from Streptomyces fradiae PE7 isolated from Vellar estuarine sediment, Parangipettai, South India. The microbial identification was done at species level based on its phenotypic, cell wall and molecular characteristics. Strain PE7 produced high quantity of antifouling compounds in agar surface fermentation when compared to submerged fermentation. In fermentation optimization, wide range of sugars, amino acids, minerals, pH, temperature and NaCl concentration was found to influence the antifouling compound production from the strain PE7. Antifouling compound PE7-C was purified from the crude extract by preparative TLC, and its activity against biofouling bacteria was confirmed by bioautography. Based on the physico-chemical characteristics, the chemical structure of the antifouling compound PE7-C was identified as quercetin (C15H10O7), a flavonoid class of compound with the molecular weight 302.23 g/mol. The purified quercetin was active against 18 biofouling bacteria with MIC range between 1.6 and 25 μg/ml, algal spore germination and mollusc foot adherence found at 100 μg/ml and 306 ± 19.6 μg ml(-1) respectively. The present study, for the first time, reported quercetin from marine-derived Streptomyces sp. PE7 with antifouling activity. This also leads to the repurposing of quercetin for the development of antifouling agent.

Microscopic and infrared spectroscopic comparison of the underwater adhesives produced by germlings of the brown seaweed species Durvillaea antarctica and Hormosira banksii

Adhesives from marine organisms are often the source of inspiration for the development of glues able to create durable bonds in wet environments. In this work, we investigated the adhesive secretions produced by germlings of two large seaweed species from the South Pacific, Durvillaea antarctica, also named 'the strongest kelp in the word', and its close relative Hormosira banksii The comparative analysis was based on optical and scanning electron microscopy imaging as well as Fourier transform infrared (FTIR) spectroscopy and principal component analysis (PCA). For both species, the egg surface presents peripheral vesicles which are released soon after fertilization to discharge a primary adhesive. This is characterized by peaks representative of carbohydrate molecules. A secondary protein-based adhesive is then secreted in the early developmental stages of the germlings. Energy dispersive X-ray, FTIR and PCA indicate that D. antarctica secretions also contain sulfated moieties, and become cross-linked with time, both conferring strong adhesive and cohesive properties. On the other hand, H. banksii secretions are complemented by the putative adhesive phlorotannins, and are characterized by a simple mechanism in which all constituents are released with the same rate and with no apparent cross-linking. It is also noted that the release of adhesive materials appears to be faster and more copious in D. antarctica than in H. banksii Overall, this study highlights that both quantity and quality of the adhesives matter in explaining the superior attachment ability of D. antarctica.

Versatile, tannic acid-mediated surface PEGylation for marine antifouling applications

In this study, we report a facile and versatile approach to the formation of marine antifouling surface coatings. The approach consists of a combined coating of polydopamine (pDA) and tannic acid (TA) and subsequent immobilization of polyethylene glycol (PEG) on solid substrates. TA coating of a pDA-coated surface was carried out using iron(III) coordination chemistry, and PEG was immobilized on the TA-coated surface via hydrogen bond formation. Stainless steel and nylon were successfully modified by this approach, and the resulting substrates were used for marine antifouling applications, in which diatom adhesion was significantly inhibited. Advantageously, this approach allowed marine antifouling coatings to be prepared by a simple immersion process under environmentally friendly conditions.

Microfluidic detachment assay to probe the adhesion strength of diatoms

Fouling release (FR) coatings are increasingly applied as an environmentally benign alternative for controlling marine biofouling. As the technology relies on removing fouling by water currents created by the motion of ships, weakening of adhesion of adherent organisms is the key design goal for improved coatings. In this paper, a microfluidic shear force assay is used to quantify how easily diatoms can be removed from surfaces. The experimental setup and the optimization of the experimental parameters to study the adhesion of the diatom Navicula perminuta are described. As examples of how varying the physico-chemical surface properties affects the ability of diatoms to bind to surfaces, a range of hydrophilic and hydrophobic self-assembled monolayers was compared. While the number of cells that attached (adhered) was barely affected by the coatings, the critical shear stress required for their removal from the surface varied significantly.

Mini-review: Molecular mechanisms of antifouling compounds

Various antifouling (AF) coatings have been developed to protect submerged surfaces by deterring the settlement of the colonizing stages of fouling organisms. A review of the literature shows that effective AF compounds with specific targets are ones often considered non-toxic. Such compounds act variously on ion channels, quorum sensing systems, neurotransmitters, production/release of adhesive, and specific enzymes that regulate energy production or primary metabolism. In contrast, AF compounds with general targets may or may not act through toxic mechanisms. These compounds affect a variety of biological activities including algal photosynthesis, energy production, stress responses, genotoxic damage, immunosuppressed protein expression, oxidation, neurotransmission, surface chemistry, the formation of biofilms, and adhesive production/release. Among all the targets, adhesive production/release is the most common, possibly due to a more extensive research effort in this area. Overall, the specific molecular targets and the molecular mechanisms of most AF compounds have not been identified. Thus, the information available is insufficient to draw firm conclusions about the types of molecular targets to be used as sensitive biomarkers for future design and screening of compounds with AF potential. In this review, the relevant advantages and disadvantages of the molecular tools available for studying the molecular targets of AF compounds are highlighted briefly and the molecular mechanisms of the AF compounds, which are largely a source of speculation in the literature, are discussed.

Antibacterial surfaces developed from bio-inspired approaches

Prevention of bacterial adhesion and biofilm formation on the surfaces of materials is a topic of major medical and societal importance. Various synthetic approaches based on immobilization or release of bactericidal substances such as metal derivatives, polyammonium salts and antibiotics were extensively explored to produce antibacterial coatings. Although providing encouraging results, these approaches suffer from the use of active agents which may be associated with side-effects such as cytotoxicity, hypersensibility, inflammatory responses or the progressive alarming phenomenon of antibiotic resistance. In addition to these synthetic approaches, living organisms, e.g. animals and plants, have developed fascinating strategies over millions of years to prevent efficiently the colonization of their surfaces by pathogens. These strategies have been recently mimicked to create a new generation of bio-inspired biofilm-resistant surfaces. In this review, we discuss some of these bio-inspired methods devoted to the development of antibiofilm surfaces. We describe the elaboration of antibacterial coatings based on natural bactericidal substances produced by living organisms such as antimicrobial peptides, bacteriolytic enzymes and essential oils. We discuss also the development of layers mimicking algae surfaces and based on anti-quorum-sensing molecules which affect cell-to-cell communication. Finally, we report on very recent strategies directly inspired from marine animal life and based on surface microstructuring.

Barnacles and biofouling

Biofouling, the attachment and growth of organisms on submerged, man-made surfaces, has plagued ship operators for at least 2500 years. Accumulation of biofouling, including barnacles and other sessile marine invertebrates, increases the frictional resistance of ships' hulls, resulting in an increase in power and in fuel consumption required to make speed. Scientists and engineers recognized over 100 years ago that in order to solve the biofouling problem, a deeper understanding of the biology of the organisms involved, particularly with regard to larval settlement and metamorphosis and adhesives and adhesion, would be required. Barnacles have served as an important tool in pursuing this research. Over the past 20 years, the pace of these studies has accelerated, likely driven by the introduction of environmental regulations banning the most effective biofouling control products from the market. Research has largely focused on larval settlement and metamorphosis, the development of new biocides, and materials/surface science. Increased research has so far, however, failed to result in commercial applications. Two recent successes (medetomidine/Selektope(®), surface-bound noradrenaline) build on our improving understanding of the role of the larval nervous system in mediating settlement and metamorphosis. New findings with regard to the curing of barnacle adhesives may pave the way to additional successes. Although the development of most current biofouling control technologies remains largely uninfluenced by basic research on, for example, the ability of settling larvae to perceive surface cues, or the nature of the interaction between organismal adhesives and the substrate, newly-developed materials can serve as useful probes to further our understanding of these processes.

The impact and control of biofouling in marine aquaculture: a review

Biofouling in marine aquaculture is a specific problem where both the target culture species and/or infrastructure are exposed to a diverse array of fouling organisms, with significant production impacts. In shellfish aquaculture the key impact is the direct fouling of stock causing physical damage, mechanical interference, biological competition and environmental modification, while infrastructure is also impacted. In contrast, the key impact in finfish aquaculture is the fouling of infrastructure which restricts water exchange, increases disease risk and causes deformation of cages and structures. Consequently, the economic costs associated with biofouling control are substantial. Conservative estimates are consistently between 5-10% of production costs (equivalent to US$ 1.5 to 3 billion yr(-1)), illustrating the need for effective mitigation methods and technologies. The control of biofouling in aquaculture is achieved through the avoidance of natural recruitment, physical removal and the use of antifoulants. However, the continued rise and expansion of the aquaculture industry and the increasingly stringent legislation for biocides in food production necessitates the development of innovative antifouling strategies. These must meet environmental, societal, and economic benchmarks while effectively preventing the settlement and growth of resilient multi-species consortia of biofouling organisms.

Multi-seasonal barnacle (Balanus improvisus) protection achieved by trace amounts of a macrocyclic lactone (ivermectin) included in rosin-based coatings

Rosin-based coatings loaded with 0.1% (w/v) ivermectin were found to be effective in preventing colonization by barnacles (Balanus improvisus) both on test panels as well as on yachts for at least two fouling seasons. The leaching rate of ivermectin was determined by mass-spectroscopy (LC/MS-MS) to be 0.7 ng cm(-2) day(-1). This low leaching rate, as deduced from the Higuchi model, is a result of the low loading, low water solubility, high affinity to the matrix and high molar volume of the model biocide. Comparison of ivermectin and control areas of panels immersed in the field showed undisturbed colonisation of barnacles after immersion for 35 days. After 73 days the mean barnacle base plate area on the controls was 13 mm(2), while on the ivermectin coating it was 3 mm(2). After 388 days, no barnacles were observed on the ivermectin coating while the barnacles on the control coating had reached a mean of 60 mm(2). In another series of coated panels, ivermectin was dissolved in a cosolvent mixture of propylene glycol and glycerol formal prior to the addition to the paint base. This method further improved the anti-barnacle performance of the coatings. An increased release rate (3 ng cm(-2) day(-1)) and dispersion of ivermectin, determined by fluorescence microscopy, and decreased hardness of the coatings were the consequences of the cosolvent mixture in the paint. The antifouling mechanism of macrocyclic lactones, such as avermectins, needs to be clarified in further studies. Beside chronic intoxication as ivermectin is slowly released from the paint film even contact intoxication occurring inside the coatings, triggered by penetration of the coating by barnacles, is a possible explanation for the mode of action and this is under investigation.

Immobilized enzymes affect biofilm formation

The effect of the activity of immobilized enzymes on the initial attachment of pathogenic bacteria commonly associated with nosocomial infections (Pseudomonas aeruginosa and Staphylococcus epidermidis) was investigated. The proteolytic enzymes, subtilisin A and the glycoside hydrolase cellulose, were covalently attached onto poly(ethylene-alt-maleic) anhydride copolymer films. A comparison between active and heat-inactivated surfaces showed that while the activity of immobilized cellulase reduced the attachment of S. epidermidis by 67%, it had no effect on the attachment of P. aeruginosa. Immobilized subtilisin A had opposite effects: the active enzyme had no effect on the attachment of S. epidermidis but reduced the attachment of P. aeruginosa by 44%. The results suggest that different biomolecules are involved in the initial steps of attachment of different bacteria, and that the development of broad-spectrum antifouling enzymatic coatings will need to involve the co-immobilization of enzymes.

Selection of commercial hydrolytic enzymes with potential antifouling activity in marine environments

In this work, the marine antifouling potential of some commercially available hydrolytic enzymes acting on the main constituents of extracellular polymeric substances (EPS) involved in bacterial biofilm formation was determined. The selected protease (i.e., alpha-chymotrypsin from bovine pancreas), carbohydrase (i.e., alpha-amylase from porcine pancreas) and lipase (from porcine pancreas) exhibited remarkable hydrolytic activities towards target macromolecules typically composing EPS under a wide range of pHs (6.5-9.0 for alpha-chymotrysin and alpha-amylase; 7.0-8.5 for the lipase) and temperatures (from 10 °C to 30 °C), as well as relevant half-lives (from about 2 weeks to about 2 months), in a marine synthetic water. The activity displayed by each enzyme was poorly affected by the co-presence of the other enzymes, thus indicating their suitability to be employed in combination. None of the enzymes was able to inhibit the formation of biofilm by an actual site marine microbial community when applied singly. However, a mixture of the same enzymes reduced biofilm formation by about 90% without affecting planktonic growth of the same microbial community. This indicates that multiple hydrolytic activities are required to efficiently prevent biofilm formation by complex microbial communities, and that the mixture of enzymes selected in this study has the potential to be employed as an environmental friendly antifouling agent in marine antifouling coatings.

Antifouling coatings: recent developments in the design of surfaces that prevent fouling by proteins, bacteria, and marine organisms

The major strategies for designing surfaces that prevent fouling due to proteins, bacteria, and marine organisms are reviewed. Biofouling is of great concern in numerous applications ranging from biosensors to biomedical implants and devices, and from food packaging to industrial and marine equipment. The two major approaches to combat surface fouling are based on either preventing biofoulants from attaching or degrading them. One of the key strategies for imparting adhesion resistance involves the functionalization of surfaces with poly(ethylene glycol) (PEG) or oligo(ethylene glycol). Several alternatives to PEG-based coatings have also been designed over the past decade. While protein-resistant coatings may also resist bacterial attachment and subsequent biofilm formation, in order to overcome the fouling-mediated risk of bacterial infection it is highly desirable to design coatings that are bactericidal. Traditional techniques involve the design of coatings that release biocidal agents, including antibiotics, quaternary ammonium salts (QAS), and silver, into the surrounding aqueous environment. However, the emergence of antibiotic- and silver-resistant pathogenic strains has necessitated the development of alternative strategies. Therefore, other techniques based on the use of polycations, enzymes, nanomaterials, and photoactive agents are being investigated. With regard to marine antifouling coatings, restrictions on the use of biocide-releasing coatings have made the generation of nontoxic antifouling surfaces more important. While considerable progress has been made in the design of antifouling coatings, ongoing research in this area should result in the development of even better antifouling materials in the future.

Enzymatic generation of hydrogen peroxide shows promising antifouling effect

The antifouling (AF) potential of hydrogen peroxide (H(2)O(2)) produced enzymatically in a coating containing starch, glucoamylase, and hexose oxidase was evaluated in a series of laboratory tests and in-sea field trials. Dissolved H(2)O(2) inhibited bacterial biofilm formation by eight of nine marine Proteobacteria, tested in microtiter plates. However, enzymatically produced H(2)O(2) released from a coating did not impede biofilm formation by bacteria in natural seawater tested in a biofilm reactor. A field trial revealed a noticeable effect of the enzyme system: after immersion in the North Sea for 97 days, the reference coating without enzymes had 35-40 barnacles, 10% area coverage by diatoms and 15% area coverage by tunicates. The enzyme containing coating had only 6-12 barnacles, 10% area coverage by diatoms and no tunicates. The enzyme system had a performance similar to a copper-based commercial coating and thus appears to have potential as a non-persistent AF agent.

Natural products as antifouling compounds: recent progress and future perspectives

Since early 2008, an increasing number of countries have ratified an international treaty to ban the application of antifouling (AF) coatings based on organotin compounds (eg tributyltin (TBT) and triphenyltin). As a result, the demand for environmentally friendly, non-toxic or low-toxicity AF compounds and technologies (green AF agents) has become an urgent reality. Marine coatings based on Cu2O and various other biocides have a negative impact on the environment and they must eventually be replaced by new, effective, and environmentally friendly AF compounds. This mini-review describes important AF compounds discovered from a variety of organisms from 2004 until mid 2009, and discusses recent and general trends in the discovery of AF compounds. Finally, a perspective on the future of AF compound development is presented. The discussion is aimed at updating scientists and engineers on the current challenges facing AF research.

The serine protease Esperase HPF inhibits the formation of multispecies biofilm

The antifouling (AF) potential of the serine protease Esperase HPF (subtilisin) was evaluated for the ability to prevent the formation of a four-species bacterial biofilm. The effects of enzyme activity, time and application of the enzyme were tested on the density and the oxidative metabolism of biofilm developed in microtiter wells. Esperase HPF did not inhibit the oxidative metabolism of the bacterial biofilm or planktonic growth, but the enzyme inhibited biofilm formation by its proteolytic activity as inactivated enzyme had no effect. The effective enzyme concentration was determined over a period of 72 h, as by then all the tested concentrations inhibited biofilm formation maximally. The effective concentrations of the enzymes in solution were the same regardless of time of application (ie before or after biofilm formation), but immobilisation of the enzymes caused a lower effective concentration. Esperase HPF is an attractive alternative to the biocidal compounds used in AF coatings today.

Physicochemical properties of (ethylene glycol)-containing self-assembled monolayers relevant for protein and algal cell resistance

The influence of the number of repeating units in self-assembled monolayers (SAMs) of ethylene glycol and of their end-group termination on the settlement and adhesion of two types of algal cells, viz., zoospores of the macroalga Ulva and cells of the diatom Navicula , was studied. The findings are related to the resistance of these surfaces against fibrinogen adsorption. Results showed that settlement and adhesion of algal cells to oligo(ethylene glycol) (OEG; 2-6 EG units) and poly(ethylene glycol) (PEG; MW = 2000, 5000) SAMs was low, while resistance was less effective for mono(ethylene glycol) (EG(1)OH)-terminated surfaces. These findings concur with former protein adsorption studies. In situ microscopy showed that PEG surfaces inhibited the settlement of zoospores, i.e., zoospores did not attach to the surfaces and remained motile. In contrast, on EG(2-6)OH surfaces, although zoospores settled, i.e., they secreted adhesive and lost motility, adhesion between secreted adhesive and the surface was extremely weak, and the settled spores were unable to bond to the surfaces. The influence of surface properties such as hydration, conformational degrees of freedom, and interfacial characteristics of the SAMs is discussed to understand the underlying repulsive mechanisms occurring in (ethylene glycol)-based coatings.

Interactions of zoospores of Ulva linza with arginine-rich oligopeptide monolayers

We recently reported on the strong interactions of zoospores of the green alga, Ulva linza with an arginine-rich oligopeptide self-assembled monolayer (SAM) [Biofouling 2008, 24, 303-312], where the arginine-rich peptide induced not only high spore settlement, but also a form of abnormal settlement, or "pseudo-settlement", whereby a proportion of spores do not go through the normal process of surface exploration, adhesive exocytosis, and loss of flagella. Further, it was demonstrated that both the total number of settled spores and the fraction of pseudosettled spores were related to the surface density of the arginine-rich peptide. Here we present a further investigation of the interactions of zoospores of Ulva with a set of oligomeric, de novo designed, arginine-rich peptides, specifically aimed to test the effect of peptide primary structure on the interaction. Via variations in the peptide length and by permutations in the amino acid sequences, we gain further insight into the spore-surface interactions. The interpretation of the biological assays is supported by physicochemical characterization of the SAMs using infrared spectroscopy, ellipsometry, and contact angle measurements. Results confirm the importance of arginine residues for the anomalous pseudosettlement, and we found that settlement is modulated by variations in both the total length and peptide primary structure. To elucidate the causes of the anomalous settlement and the possible relation to peptide-membrane interactions, we also compared the settlement of the "naked" zoospores of Ulva (which present a lipoprotein membrane to the exterior without a discrete polysaccharide cell wall), with the settlement of diatoms (unicellular algae that are surrounded by a silica cell wall), onto the peptide SAMs. Cationic SAMs do not notably affect settlement (attachment), adhesion strength, or viability of diatom cells, suggesting that the effect of the peptides on zoospores of Ulva is mediated via specific peptide-membrane interactions.

Mannanase transfer into hexane and xylene by liquid-liquid extraction

The formation of noncovalent complexes between glycosidase, endo-1,4-beta-D-mannanase, and ionic surfactant di(2-ethylhexyl) sodium sulfosuccinate (AOT) was shown to promote protein transfer into organic solvents such as xylene and hexane. It was found that mannanase can be solubilized in hexane and in xylene with concentration at least 2.5 and 2.0 mg/ml, respectively. The catalytic activity of the enzyme in hexane spontaneously increases with the concentration of AOT and is about 10% of the activity in aqueous system. In xylene, a catalytic activity higher than that in bulk aqueous conditions was found for the samples containing 0.1-0.3 mg/ml of mannanase, while for the samples with a higher concentration of enzyme, the activity was hardly detected.

Antifouling potential of Subtilisin A immobilized onto maleic anhydride copolymer thin films

The proteinaceous nature of the adhesives used by most fouling organisms to attach to surfaces suggests that coatings incorporating proteolytic enzymes may provide a technology for the control of biofouling. In the present article, the antifouling (AF) and fouling release potential of model coatings incorporating the surface-immobilized protease, Subtilisin A, have been investigated. The enzyme was covalently attached to maleic anhydride copolymer thin films; the characteristics of the bioactive coatings obtained were adjusted through variation of the type of copolymer and the concentration of the enzyme solution used for immobilization. The bioactive coatings were tested for their effect on the settlement and adhesion strength of two major fouling species: the green alga Ulva linza and the diatom Navicula perminuta. The results show that the immobilized enzyme effectively reduced the settlement and adhesion strength of zoospores of Ulva and the adhesion strength of Navicula cells. The AF efficacy of the bioactive coatings increased with increasing enzyme surface concentration and activity, and was found to be superior to the equivalent amount of enzyme in solution. The results provide a rigorous analysis of one approach to the use of immobilized proteases to reduce the adhesion of marine fouling organisms and are of interest to those investigating enzyme-containing coating technologies for practical biofouling control.

The potential of nano-structured silicon oxide type coatings deposited by PACVD for control of aquatic biofouling

SiO(x)-like coatings were deposited on glass slides from a hexamethylsiloxane precursor by plasma-assisted CVD (PACVD). Surface energies (23.1-45.7 mJ m(-1)) were correlated with the degree of surface oxidation and hydrocarbon contents. Tapping mode AFM revealed a range of surface topologies with Ra values 1.55-3.16 nm and RMS roughness 1.96-4.11 nm. Settlement of spores of the green alga Ulva was significantly less, and detachment under shear significantly more on the lowest surface energy coatings. Removal of young plants (sporelings) of Ulva under shear was positively correlated with reducing the surface energy of the coatings. The most hydrophobic coatings also showed good performance against a freshwater bacterium, Pseudomonas fluorescens, significantly reducing initial attachment and biofilm formation, and reducing the adhesion strength of attached bacterial cells under shear. Taken together the results indicate potential for further investigation of these coatings for applications such as heat exchangers and optical instruments.

Marine antifouling laboratory bioassays: an overview of their diversity

In aquatic environments, biofouling is a natural process of colonization of submerged surfaces, either living or artificial, involving a wide range of organisms from bacteria to invertebrates. Antifouling can be defined as preventing the attachment of organisms onto surfaces. This article reviews the laboratory bioassays that have been developed for studying the control of algae and invertebrates by epibiosis (chemical ecology) and the screening of new active compounds (natural products and biocides) to inhibit settlement or adhesion, ie fouling-release coatings. The assays utilize a range of organisms (mainly marine bacteria, diatoms, algae, barnacles). The main attributes of assays for micro- and macroorganisms are described in terms of their main characteristics and depending on the biological process assessed (growth, adhesion, toxicity, behavior). The validation of bioassays is also discussed.

Nanostructured films of amphiphilic fluorinated block copolymers for fouling release application

New amphiphilic block copolymers S nSz m consisting of blocks with varied degrees of polymerization, n and m, of polystyrene, S, and polystyrene carrying an amphiphilic polyoxyethylene-polytetrafluoroethylene chain side-group, Sz, were prepared by controlled atom transfer radical polymerization (ATRP). The block copolymers, either alone or in a blend with commercial SEBS (10 wt% SEBS), were spin-coated in thinner films (200-400 nm) on glass and spray-coated in thicker films ( approximately 500 nm) on a SEBS underlayer (150-200 microm). Angle-resolved X-ray photoelectron spectroscopy (XPS) measurements proved that at any photoemission angle, varphi, the atomic ratio F/C was larger than that expected from the known stoichiometry. Consistent with the enrichment of the outer film surface (3-10 nm) in F content, the measured contact angles, theta, with water (theta w > or = 107 degrees ) and n-hexadecane (theta h > or = 64 degrees ) pointed to the simultaneous hydrophobic and lipophobic character of the films. The film surface tension gamma S calculated from the theta values was in the range 13-15 mN/m. However, the XPS measurements on the "wet" films after immersion in water demonstrated that the film surface underwent reconstruction owing to its amphiphilic nature, thereby giving rise to a more chemically heterogeneous structure. The atomic force microscopy (AFM) images (tapping mode/AC mode) revealed well-defined morphological features of the nanostructured films. Depending on the chemical composition of the block copolymers, spherical (ca. 20 nm diameter) and lying cylindrical (24-29 nm periodicity) nanodomains of the S discrete phase were segregated from the Sz continuous matrix (root-mean-square, rms, roughness approximately 1 nm). After immersion in water, the underwater AFM patterns evidenced a transformation to a mixed surface structure, in which the nanoscale heterogeneity and topography (rms = 1-6 nm) were increased. The coatings were subjected to laboratory bioassays to explore their intrinsic ability to resist the settlement and reduce the adhesion strength of two marine algae, viz., the macroalga (seaweed) Ulva linza and the unicellular diatom Navicula perminuta. The amphiphilic nature of the copolymer coatings resulted in distinctly different performances against these two organisms. Ulva adhered less strongly to the coatings richer in the amphiphilic polystyrene component, percentage removal being maximal at intermediate weight contents. In contrast, Navicula cells adhered less strongly to coatings with a lower weight percentage of the amphiphilic side chains. The results are discussed in terms of the changes in surface structure caused by immersion and the effects such changes may have on the adhesion of the test organisms.