Fibre wall and lumen fractions drive wood density variation across 24 Australian angiosperms

Functional traits of fossil plants

A minuscule fraction of the Earth's paleobiological diversity is preserved in the geological record as fossils. What plant remnants have withstood taphonomic filtering, fragmentation, and alteration in their journey to become part of the fossil record provide unique information on how plants functioned in paleo-ecosystems through their traits. Plant traits are measurable morphological, anatomical, physiological, biochemical, or phenological characteristics that potentially affect their environment and fitness. Here, we review the rich literature of paleobotany, through the lens of contemporary trait-based ecology, to evaluate which well-established extant plant traits hold the greatest promise for application to fossils. In particular, we focus on fossil plant functional traits, those measurable properties of leaf, stem, reproductive, or whole plant fossils that offer insights into the functioning of the plant when alive. The limitations of a trait-based approach in paleobotany are considerable. However, in our critical assessment of over 30 extant traits we present an initial, semi-quantitative ranking of 26 paleo-functional traits based on taphonomic and methodological criteria on the potential of those traits to impact Earth system processes, and for that impact to be quantifiable. We demonstrate how valuable inferences on paleo-ecosystem processes (pollination biology, herbivory), past nutrient cycles, paleobiogeography, paleo-demography (life history), and Earth system history can be derived through the application of paleo-functional traits to fossil plants.

Linkages among stem xylem transport, biomechanics, and storage in lianas and trees across three contrasting environments

PREMISE

Stem xylem transports water and nutrients, mechanically supports aboveground tissues, and stores water and nonstructural carbohydrates. These three functions are associated with three types of cells-vessel, fiber, and parenchyma, respectively.

METHODS

We measured stem theoretical hydraulic conductivity (Kt), modulus of elasticity (MOE), tissue water content, starch, soluble sugars, cellulose, and xylem anatomical traits in 15 liana and 16 tree species across three contrasting sites in Southwest China.

RESULTS

Lianas had higher hydraulic efficiency and tissue water content, but lower MOE and cellulose than trees. Storage traits (starch and soluble sugars) did not significantly differ between lianas and trees, and trait variation was explained mainly by site, highlighting how environment shapes plant storage strategies. Kt was significantly positively correlated with vessel diameter and vessel area fraction in lianas and all species combined. The MOE was significantly positively correlated with fiber area fraction, wood density, and cellulose in lianas and across all species. The tissue water content was significantly associated with parenchyma area fraction in lianas. Support function was strongly linked with transport and storage functions in lianas. In trees, transport and support functions were not correlated, while storage function was tightly linked with transport and support functions.

CONCLUSIONS

These findings enhance our understanding of the relationship between stem xylem structure and function in lianas and trees, providing valuable insights into how plants adapt to environmental changes and the distinct ecological strategies employed by lianas and by trees to balance the demands of hydraulic transport, mechanical support, and storage.

Petiole XLA (xylem to leaf area ratio) integrates hydraulic safety and efficiency across a diverse group of eucalypt leaves

A theoretical trade-off between the efficiency and safety of water transport systems in plants is used to explain diverse ecological patterns, from tree size to community structure. Despite its pervasive influence, this theory has marginal empirical support. This may be partially due to obfuscation of associations by wide phylogenetic sampling or non-standard sampling between studies. To address this, we examine the coordination of structural and anatomical traits linked to hydraulic safety and efficiency in the leaves of an ecologically diverse group of eucalypts. We introduce a new trait for characterising leaf water transport function measured as the cross-sectional XA at the petiole divided by the downstream leaf area (XLApetiole ). Variation in XLApetiole revealed support for a safety-efficiency trade-off in eucalypt leaves. XLApetiole was negatively correlated with theoretical petiole xylem conductivity (Ks_petiole ) and strongly negatively correlated with leaf cavitation vulnerability (Ψ50leaf ). Species with lower Ψ50leaf exhibited petiole xylem with narrower vessels and greater fibre wall area fractions. Our findings highlight XLApetiole as a novel integrative trait that provides insights into the evolution of leaf form and function in eucalypts and holds promise for wider use among diverse species.

The links between wood traits and species demography change during tree development in a lowland tropical rainforest

One foundational assumption of trait-based ecology is that traits can predict species demography. However, the links between traits and demographic rates are, in general, not as strong as expected. These weak associations may be due to the use of traits that are distantly related to performance, and/or the lack of consideration of size-related variations in both traits and demographic rates. Here, we examined how wood traits were related to demographic rates in 19 tree species from a lowland forest in eastern Amazonia. We measured 11 wood traits (i.e. structural, anatomical and chemical traits) in sapling, juvenile and adult wood; and related them to growth and mortality rates (MR) at different ontogenetic stages. The links between wood traits and demographic rates changed during tree development. At the sapling stage, relative growth rates (RGR) were negatively related to wood specific gravity (WSG) and total parenchyma fractions, while MR decreased with radial parenchyma fractions, but increased with vessel lumen area (VA). Juvenile RGR were unrelated to wood traits, whereas juvenile MR were negatively related to WSG and axial parenchyma fractions. At the adult stage, RGR scaled with VA and wood potassium concentrations. Adult MR were not predicted by any trait. Overall, the strength of the trait-demography associations decreased at later ontogenetic stages. Our results indicate that the associations between traits and demographic rates can change as trees age. Also, wood chemical or anatomical traits may be better predictors of growth and MR than WSG. Our findings are important to expand our knowledge on tree life-history variations and community dynamics in tropical forests, by broadening our understanding on the links between wood traits and demography during tree development.

Hydraulic traits and photosynthesis are coordinated with trunk sapwood capacitance in tropical tree species

Water stored in trunk sapwood is vital for the canopy to maintain its physiological function under high transpiration demands. Little is known regarding the anatomical properties that contribute to the hydraulic capacitance of tree trunks and whether trunk capacitance is correlated with the hydraulic and gas exchange traits of canopy branches. We examined sapwood capacitance, xylem anatomical characteristics of tree trunks, embolism resistance, the minimal xylem water potential of canopy branches, leaf photosynthesis and stomatal conductance in 22 species from a tropical seasonal rainforest and savanna. The results showed that the mean trunk sapwood capacitance did not differ between the two biomes. Capacitance was closely related to the fiber lumen fraction and fiber wall reinforcement and not to the axial and ray parenchyma fractions. Additionally, it was positively correlated with the theoretical hydraulic conductivity of a trunk and the specific hydraulic conductivity of branches, and showed a trade-off with branch embolism resistance. Species with a high trunk sapwood capacitance maintained less negative canopy water potentials in the dry season, but higher leaf photosynthetic rates and stomatal conductance in the wet season. This study provides a functional link among trunk sapwood capacitance, xylem anatomy, canopy hydraulics and photosynthesis in tropical trees.

Tree species differ in plant economic spectrum traits in the tropical dry forest of Mexico

In tropical dry forests, studies on wood anatomical traits have concentrated mainly on variations in vessel diameter and frequency. Recent research suggests that parenchyma and fibers also play an important role in water conduction and in xylem hydraulic safety. However, these relationships are not fully understood, and wood trait variation among different functional profiles as well as their variation under different water availability scenarios have been little studied. In this work, we aim to (1) characterize a set of wood anatomical traits among six selected tree species that represent the economic spectrum of tropical dry forests, (2) assess the variation in these traits under three different rainfall regimes, and (3) determine the relationships between wood anatomical traits and possible functional trade-offs. Differences among species and sites in wood traits were explored. Linear mixed models were fitted, and model comparison was performed. Most variation occurred among species along the economic spectrum. Obligate deciduous, low wood density species were characterized by wood with wide vessels and low frequency, suggesting high water transport capacity but sensitivity to drought. Moreover, high cell fractions of carbon and water storage were also found in these tree species related to the occurrence of abundant parenchyma or septate fibers. Contrary to what most studies show, Cochlospermum vitifolium, a succulent tree species, presented the greatest variation in wood traits. Facultative deciduous, high wood density species were characterized by a sturdy vascular system that may favor resistance to cavitation and low reserve storage. Contrary to our expectations, variation among the rainfall regimes was generally low in all species and was mostly related to vessel traits, while fiber and parenchyma traits presented little variation among species. Strong functional associations between wood anatomical traits and functional trade-offs were found for the six tree species studied along the economic spectrum of tropical dry forests.

Functional trade-offs are driven by coordinated changes among cell types in the wood of angiosperm trees from different climates

Wood performs several functions to ensure tree survival and carbon allocation to a finite stem volume leads to trade-offs among cell types. It is not known to what extent these trade-offs modify functional trade-offs and if they are consistent across climates and evolutionary lineages. Twelve wood traits were measured in stems and coarse roots across 60 adult angiosperm tree species from temperate, Mediterranean and tropical climates. Regardless of climate, clear trade-offs occurred among cellular fractions, but did not translate into specific functional trade-offs. Wood density was negatively related to hydraulic conductivity (Kth ) in stems and roots, but was not linked to nonstructural carbohydrates (NSC), implying a functional trade-off between mechanical integrity and transport but not with storage. NSC storage capacity was positively associated with Kth in stems and negatively in roots, reflecting a potential role for NSC in the maintenance of hydraulic integrity in stems but not in roots. Results of phylogenetic analyses suggest that evolutionary histories cannot explain covariations among traits. Trade-offs occur among cellular fractions, without necessarily modifying trade-offs in function. However, functional trade-offs are driven by coordinated changes among xylem cell types depending on the dominant role of each cell type in stems and roots.

Functional traits and water-transport strategies of woody species in an insular environment in a tropical forest

PREMISE

Plants survive in habitats with limited resource availability and contrasting environments by responding to variation in environmental factors through morphophysiological traits related to species performance in different ecosystems. However, how different plant strategies influence the megadiversity of tropical species has remained a knowledge gap.

METHODS

We analyzed variations in 27 morphophysiological traits of leaves and secondary xylem in Erythroxylum pulchrum and Tapirira guianensis, which have the highest absolute dominance in these physiognomies and occur together in areas of restinga and dense ombrophilous forest to infer water-transport strategies of Atlantic Forest woody plants.

RESULTS

The two species presented different sets of morphophysiological traits, strategies to avoid embolism and ensure water transport, in different phytophysiognomies. Tapirira guianensis showed possible adaptations influenced by phytophysiognomy, while E. pulchrum showed less variation in the set of characteristics between different phytophysiognomies.

CONCLUSIONS

Our results provide essential tools to understand how the environment can modulate morphofunctional traits and how each species adjusts differently to adapt to different phytophysiognomies. In this sense, the results for these species reveal new species-specific responses in the tropical forest. Such knowledge is a prerequisite to predict future development of the most vulnerable forests as climate changes.

Root and branch hydraulic functioning and trait coordination across organs in drought-deciduous and evergreen tree species of a subtropical highland forest

Vessel traits are key in understanding trees' hydraulic efficiency, and related characteristics like growth performance and drought tolerance. While most plant hydraulic studies have focused on aboveground organs, our understanding of root hydraulic functioning and trait coordination across organs remains limited. Furthermore, studies from seasonally dry (sub-)tropical ecosystems and mountain forests are virtually lacking and uncertainties remain regarding potentially different hydraulic strategies of plants differing in leaf habit. Here, we compared wood anatomical traits and specific hydraulic conductivities between coarse roots and small branches of five drought-deciduous and eight evergreen angiosperm tree species in a seasonally dry subtropical Afromontane forest in Ethiopia. We hypothesized that largest vessels and highest hydraulic conductivities are found in roots, with greater vessel tapering between roots and equally-sized branches in evergreen angiosperms due to their drought-tolerating strategy. We further hypothesized that the hydraulic efficiencies of root and branches cannot be predicted from wood density, but that wood densities across organs are generally related. Root-to-branch ratios of conduit diameters varied between 0.8 and 2.8, indicating considerable differences in tapering from coarse roots to small branches. While deciduous trees showed larger branch xylem vessels compared to evergreen angiosperms, root-to-branch ratios were highly variable within both leaf habit types, and evergreen species did not show a more pronounced degree of tapering. Empirically determined hydraulic conductivity and corresponding root-to-branch ratios were similar between both leaf habit types. Wood density of angiosperm roots was negatively related to hydraulic efficiency and vessel dimensions; weaker relationships were found in branches. Wood density of small branches was neither related to stem nor coarse root wood densities. We conclude that in seasonally dry subtropical forests, similar-sized coarse roots hold larger xylem vessels than small branches, but the degree of tapering from roots to branches is highly variable. Our results indicate that leaf habit does not necessarily influence the relationship between coarse root and branch hydraulic traits. However, larger conduits in branches and a low carbon investment in less dense wood may be a prerequisite for high growth rates of drought-deciduous trees during their shortened growing season. The correlation of stem and root wood densities with root hydraulic traits but not branch wood points toward large trade-offs in branch xylem towards mechanical properties.

Anatomical traits related to leaf and branch hydraulic functioning on Amazonian savanna plants

Amazonian savannas are isolated patches of open habitats found within the extensive matrix of Amazonian tropical forests. There remains limited evidence on how Amazonian plants from savannas differ in the traits related to drought resistance and water loss control. Previous studies have reported several xeromorphic characteristics of Amazonian savanna plants at the leaf and branch levels that are linked to soil, solar radiation, rainfall and seasonality. How anatomical features relate to plant hydraulic functioning in this ecosystem is less known and instrumental if we want to accurately model transitions in trait states between alternative vegetation in Amazonia. In this context, we combined studies of anatomical and hydraulic traits to understand the structure-function relationships of leaf and wood xylem in plants of Amazonian savannas. We measured 22 leaf, wood and hydraulic traits, including embolism resistance (as P₅₀), Hydraulic Safety Margin (HSM) and isotope-based water use efficiency (WUE), for the seven woody species that account for 75% of the biomass of a typical Amazonian savanna on rocky outcrops in the state of Mato Grosso, Brazil. Few anatomical traits are related to hydraulic traits. Our findings showed wide variation exists among the seven species studied here in resistance to embolism, water use efficiency and structural anatomy, suggesting no unique dominant functional plant strategy to occupy an Amazonian savanna. We found wide variation in resistance to embolism (-1.6 ± 0.1 MPa and -5.0 ± 0.5 MPa) with species that are less efficient in water use (e.g. Kielmeyera rubriflora, Macairea radula, Simarouba versicolor, Parkia cachimboensis and Maprounea guianensis) showing higher stomatal conductance potential, supporting xylem functioning with leaf succulence and/or safer wood anatomical structures and that species that are more efficient in water use (e.g. Norantea guianensis and Alchornea discolor) can exhibit riskier hydraulic strategies. Our results provide a deeper understanding of how branch and leaf structural traits combine to allow for different hydraulic strategies among coexisting plants. In Amazonian savannas, this may mean investing in buffering water loss (e.g. succulence) at leaf level or safer structures (e.g. thicker pit membranes) and architectures (e.g. vessel grouping) in their branch xylem.

Ambient and substrate energy influence decomposer diversity differentially across trophic levels

The species-energy hypothesis predicts increasing biodiversity with increasing energy in ecosystems. Proxies for energy availability are often grouped into ambient energy (i.e., solar radiation) and substrate energy (i.e., non-structural carbohydrates or nutritional content). The relative importance of substrate energy is thought to decrease with increasing trophic level from primary consumers to predators, with reciprocal effects of ambient energy. Yet, empirical tests are lacking. We compiled data on 332,557 deadwood-inhabiting beetles of 901 species reared from wood of 49 tree species across Europe. Using host-phylogeny-controlled models, we show that the relative importance of substrate energy versus ambient energy decreases with increasing trophic levels: the diversity of zoophagous and mycetophagous beetles was determined by ambient energy, while non-structural carbohydrate content in woody tissues determined that of xylophagous beetles. Our study thus overall supports the species-energy hypothesis and specifies that the relative importance of ambient temperature increases with increasing trophic level with opposite effects for substrate energy.

Use of near-infrared spectroscopy to estimate physical, anatomical and hydraulic properties of Eucalyptus wood

Tree breeding programs and wood industries require simple, time- and cost-effective techniques to process large volumes of samples. In recent decades, near-infrared spectroscopy (NIRS) has been acknowledged as one of the most powerful techniques for wood analysis, making it the most used tool for high-throughput phenotyping. Previous studies have shown that a significant number of anatomical, physical, chemical and mechanical wood properties can be estimated through NIRS, both for angiosperm and gymnosperm species. However, the ability of this technique to predict functional traits related to drought resistance has been poorly explored, especially in angiosperm species. This is particularly relevant since determining xylem hydraulic properties by conventional techniques is complex and time-consuming, clearly limiting its use in studies and applications that demand large amounts of samples. In this study, we measured several wood anatomical and hydraulic traits and collected NIR spectra in branches of two Eucalyptus L'Hér species. We developed NIRS calibration models and discussed their ability to accurately predict the studied traits. The models generated allowed us to adequately calibrate the reference traits, with high R2 (≥0.75) for traits such as P12, P88, the slope of the vulnerability curves to xylem embolism or the fiber wall fraction, and with lower R2 (0.39-0.52) for P50, maximum hydraulic conductivity or frequency of ray parenchyma. We found that certain wavenumbers improve models' calibration, with those in the range of 4000-5500 cm-1 predicting the highest number of both anatomical and functional traits. We concluded that the use of NIRS allows calibrating models with potential predictive value not only for wood structural and chemical variables but also for anatomical and functional traits related to drought resistance in wood types with complex structure as eucalypts. These results are promising in light of the required knowledge about species and genotypes adaptability to global climatic change.

Tree height effects on vascular anatomy of upper-canopy twigs across a wide range of tropical rainforest species

Vessel diameter variation along the hydraulic pathway determines how much water can be moved against the force of gravity from roots to leaves. While it is well-documented that tree size scales with vessel diameter variation at the stem base due to the effect of basipetal vessel widening, much less is known whether this likewise applies to terminal sun-exposed twigs. To analyze the effect of tree height on twig xylem anatomy, we compiled data for 279 tropical rainforest tree species belonging to 56 families in the lowlands of Jambi Province, Indonesia. Terminal upper-canopy twigs of fully grown individuals were collected and used for wood anatomical analysis.

We show that hydraulically weighted vessel diameter (Dh) and potential hydraulic conductivity (Kp) of upper canopy twigs increase with tree height across species although the relationship was weak. When averaged across given tree height classes irrespectively of species identity, however, a strong dependency of tree height on Dh and Kp was observed, but not on the lumen-to-sapwood area ratio (Al:Ax) or vessel density (VD).

According to the comparison between actual tree height and the maximum tree height reported for a given species in the stand, we show that the vascular xylem anatomy of their terminal twigs reflects their canopy position and thus ecological niche (understory versus overstory) at maturity. We conclude that the capacity to move large quantities of water during the diurnal peak in evaporative demand is a prerequisite for growing tall in a humid tropical environment.

Trade-offs between xylem hydraulic efficiency and mechanical strength in Chinese evergreen and deciduous savanna species

Evergreen and deciduous species coexist in tropical dry forests and savannas, but differ in physiological mechanisms and life-history strategies. Hydraulic conductivity and mechanical support are two major functions of the xylems of woody plant species related to plant growth and survival. In this study, we measured sapwood-specific hydraulic conductivity (Ks), leaf-specific hydraulic conductivity (KL), modulus of rupture (MOR) and elasticity (MOE), xylem anatomical traits and fiber contents in the xylems of 20 woody species with contrasting leaf phenology (evergreen vs deciduous) in a Chinese savanna. Our results showed that deciduous species had significantly higher Ks and KL but lower MOR and MOE than evergreen species. Evergreen species experienced more negative seasonal minimum water potential (Pmin) than deciduous species during the dry season. Furthermore, we found trade-offs between xylem hydraulic efficiency and mechanical strength across species and within the evergreen and deciduous groups, and these trade-offs were modulated by structural and chemical traits. Both Ks and KL were significantly related to hydraulic weighted vessel diameter (Dh) across all species and within the deciduous group. Both MOR and MOE were significantly related to wood density, neutral detergent fiber and acid detergent fiber across species and within evergreen and deciduous groups. Our findings demonstrated that Chinese evergreen and deciduous savanna species diverged in xylem hydraulic and mechanical functions, reflecting conservative and acquisitive life-history strategies for evergreen and deciduous species, respectively. This study provides new information with which to understand the hydraulic and biomechanical properties and ecological strategies of savanna species in long-term dry-hot environments.

The evolution of mechanical properties of conifer and angiosperm woods

The material properties of the cells and tissues of an organism dictate, to a very large degree, the ability of the organism to cope with mechanical stress induced by externally applied forces. It is, therefore, critical to understand how these properties differ across diverse species and how they have evolved. Herein, a large data base (N = 84 species) for the mechanical properties of wood samples measured at biologically natural moisture contents (i.e., "green wood") was analyzed to determine the extent to which these properties are correlated across phylogenetically diverse tree species, to determine if a phylogenetic pattern of trait values exists, and, if so, to assess whether the rate of trait evolution varies across the phylogeny. The phylogenetic comparative analyses presented here confirm previous results that critical material properties are significantly correlated with one another and with wood density. Although the rates of trait evolution of angiosperms and gymnosperms (i.e., conifers) are similar, the material properties of both clades evolved in distinct selective regimes that are phenotypically manifested in lower values across all material properties in gymnosperms. This observation may be related to the structural differences between gymnosperm and angiosperm wood such as the presence of vessels in angiosperms. Explorations of rate heterogeneity indicate high rates of trait evolution in wood density in clades within both conifers and angiosperms (e.g., Pinus and Shorea). Future analyses are warranted using additional data given these preliminary results, especially because there is ample evidence of convergent evolution in the material properties of conifers and angiosperm wood that appear to experience similar ecological conditions.

Small and slow is safe: On the drought tolerance of tropical tree species

Understanding how evolutionary history and the coordination between trait trade-off axes shape the drought tolerance of trees is crucial to predict forest dynamics under climate change. Here, we compiled traits related to drought tolerance and the fast-slow and stature-recruitment trade-off axes in 601 tropical woody species to explore their covariations and phylogenetic signals. We found that xylem resistance to embolism (P50) determines the risk of hydraulic failure, while the functional significance of leaf turgor loss point (TLP) relies on its coordination with water use strategies. P50 and TLP exhibit weak phylogenetic signals and substantial variation within genera. TLP is closely associated with the fast-slow trait axis: slow species maintain leaf functioning under higher water stress. P50 is associated with both the fast-slow and stature-recruitment trait axes: slow and small species exhibit more resistant xylem. Lower leaf phosphorus concentration is associated with more resistant xylem, which suggests a (nutrient and drought) stress-tolerance syndrome in the tropics. Overall, our results imply that (1) drought tolerance is under strong selective pressure in tropical forests, and TLP and P50 result from the repeated evolutionary adaptation of closely related taxa, and (2) drought tolerance is coordinated with the ecological strategies governing tropical forest demography. These findings provide a physiological basis to interpret the drought-induced shift toward slow-growing, smaller, denser-wooded trees observed in the tropics, with implications for forest restoration programmes.

Parenchyma fractions drive the storage capacity of nonstructural carbohydrates across a broad range of tree species

PREMISE

Nonstructural carbohydrates (NSCs) play a key role in tree performance and functioning and are stored in radial and axial parenchyma (RAP) cells. Whether this relationship is altered among species and climates or is linked to functional traits describing xylem structure (wood density) and tree stature is not known.

METHODS

In a systematic review, we collated data for NSC content and the proportion of RAP in stems for 68 tree species. To examine the relationships of NSCs and RAP with climatic factors and other functional traits, we also collected climatic data at each tree's location, as well as wood density and maximum height. A phylogenetic tree was constructed to examine the influence of species' evolutionary relationships on the associations among NSCs, RAP, and functional traits.

RESULTS

Across all 68 tree species, NSCs were positively correlated with RAP and mean annual temperature, but relationships were only weakly significant in temperate species and angiosperms. When separating RAP into radial parenchyma (RP) and axial parenchyma (AP), both NSCs and wood density were positively correlated with RP but not with AP. Wood in taller trees was less dense and had lower RAP than in shorter trees, but height was not related to NSCs.

CONCLUSIONS

In trees, NSCs are stored mostly in the RP fraction, which has a larger surface area in warmer climates. Additionally, NSCs were only weakly linked to wood density and tree height. Our analysis of evolutionary relationships demonstrated that RAP fractions and NSC content were always closely related across all 68 tree species, suggesting that RAP can act as a reliable proxy for potential NSC storage capacity in tree stems.

Parenchyma underlies the interspecific variation of xylem hydraulics and carbon storage across 15 woody species on a subtropical island in Japan

Parenchyma is an important component of the secondary xylem. It has multiple functions and its fraction is known to vary substantially across angiosperm species. However, the physiological significance of this variation is not yet fully understood. Here, we examined how different types of parenchyma (ray parenchyma [RP], axial parenchyma [AP] and AP in direct contact with vessels [APV]) are coordinated with three essential xylem functions: water conduction, storage of non-structural carbohydrate (NSC) and mechanical support. Using branch sapwood of 15 co-occurring drought-adapted woody species from the subtropical Bonin Islands, Japan, we quantified 10 xylem anatomical traits and examined their linkages to hydraulic properties, storage of soluble sugars and starch and sapwood density. The fractions of APV and AP in the xylem transverse sections were positively correlated with the percentage loss of conductivity in the native condition, whereas that of RP was negatively correlated with the maximum conductivity across species. Axial and ray parenchyma fractions were positively associated with concentrations of starch and NSC. The fraction of parenchyma was independent of sapwood density, regardless of parenchyma type. We also identified a negative relationship between hydraulic conductivity and NSC storage and sapwood density, mirroring the negative relationship between the fractions of parenchyma and vessels. These results suggest that parenchyma fraction underlies species variation in xylem hydraulic and carbon use strategies, wherein xylem with a high fraction of AP may adopt an embolism repair strategy through an increased starch storage with low cavitation resistance.

Wood density relates negatively to maximum plant height across major angiosperm and gymnosperm orders

PREMISE

Wood density is a crucial plant functional trait related to plant life history strategies. Its ecological importance in small-stature growth forms (e.g., shrubs) has not been extensively examined. Given that hydraulic conduit dimensions vary positively with plant height and that there is a negative relationship between conduits' diameter and wood density, I hypothesized an also negative relationship between wood density and plant height. Knowing that bark and pith proportions are significant in small-diameter stems, I additionally disentangled the contribution of wood, bark, and pith to stem density.

METHODS

I determined density in small-diameter stems across 153 species spanning all major angiosperm and gymnosperm orders by considering a diversity of growth forms (trees, treelets, shrubs, vines, and hemiparasites). Stem cross sections were dissected to consider the densities of wood with bark and pith; wood with pith and without bark; wood with bark and no pith; and wood without bark and pith. Secondary growth was also measured.

RESULTS

Trees showed similar wood densities as non-self-supporting vines, and both showed significantly less dense wood than treelets, shrubs, and hemiparasites. General comparisons showed that wood was significantly denser than all other tissues, and these differences did not depend on growth form. Wood density was significantly and negatively related to growth rate and pith area proportions but not to bark thickness proportion.

CONCLUSIONS

An implicit negative relationship between maximum plant height and stem density emerges as a property of plants likely linked to hydraulic conductive size.

Growth and Wood Trait Relationships of Alnus glutinosa in Peatland Forest Stands With Contrasting Water Regimes

Human-driven peatland drainage has occurred in Europe for centuries, causing habitat degradation and leading to the emission of greenhouse gases. As such, in the last decades, there has been an increase in policies aiming at restoring these habitats through rewetting. Alder (Alnus glutinosa L.) is a widespread species in temperate forest peatlands with a seemingly high waterlogging tolerance. Yet, little is known about its specific response in growth and wood traits relevant for tree functioning when dealing with changing water table levels. In this study, we investigated the effects of rewetting and extreme flooding on alder growth and wood traits in a peatland forest in northern Germany. We took increment cores from several trees at a drained and a rewetted stand and analyzed changes in ring width, wood density, and xylem anatomical traits related to the hydraulic functioning, growth, and mechanical support for the period 1994-2018. This period included both the rewetting action and an extreme flooding event. We additionally used climate-growth and climate-density correlations to identify the stand-specific responses to climatic conditions. Our results showed that alder growth declined after an extreme flooding in the rewetted stand, whereas the opposite occurred in the drained stand. These changes were accompanied by changes in wood traits related to growth (i.e., number of vessels), but not in wood density and hydraulic-related traits. We found poor climate-growth and climate-density correlations, indicating that water table fluctuations have a stronger effect than climate on alder growth. Our results show detrimental effects on the growth of sudden water table changes leading to permanent waterlogging, but little implications for its wood density and hydraulic architecture. Rewetting actions should thus account for the loss of carbon allocation into wood and ensure suitable conditions for alder growth in temperate peatland forests.

The role of wood anatomical traits in the coexistence of oak species along an environmental gradient

Oaks (Quercus) are a dominant woody plant genus in the northern hemisphere, which occupy a wide range of habitats and are ecologically diverse. We analysed the wood anatomical traits, the variables derived and the relative hydraulic conductivity of 21 oak species to identify their performance according to abiotic factors, leaf phenological patterns and phylogenetic restrictions by analysing the interspecific variation along an environmental gradient. First, we determine the causes of anatomical trait variation in the oaks, analysing the functional trade-offs related to distribution along the environmental gradient. We measure the phenotypic plasticity of the anatomical traits to determine the role of environment and geographic distance in the range of phenotypic plasticity. Second, we examined if oaks co-occurred along the environmental gradient. Then we analysed if wood anatomical traits reflect differences among their phylogenetic section, leaf habit and a phylogenetic section/leaf habit category. Last, we tested the phylogenetic signal. Our results showed that vessel diameter, vessel frequency, wood density and relative hydraulic conductivity are the main axes of trait variation in the species analysed among leaf habit categories. The aridity index and seasonal precipitation drive the variation in the analysed traits. Higher environmental distance resulted in a higher relative distance plasticity index among traits. Co-occurrence of oak species with different leaf habits and phylogenetic trajectories may promote complementary resource acquisition. The phylogenetic signal in the oak species studied was low, which implies labile wood traits.

Coordination of plant hydraulic and photosynthetic traits: confronting optimality theory with field measurements

Close coupling between water loss and carbon dioxide uptake requires coordination of plant hydraulics and photosynthesis. However, there is still limited information on the quantitative relationships between hydraulic and photosynthetic traits. We propose a basis for these relationships based on optimality theory, and test its predictions by analysis of measurements on 107 species from 11 sites, distributed along a nearly 3000-m elevation gradient. Hydraulic and leaf economic traits were less plastic, and more closely associated with phylogeny, than photosynthetic traits. The two sets of traits were linked by the sapwood to leaf area ratio (Huber value, v_H ). The observed coordination between v_H and sapwood hydraulic conductivity (K_S ) and photosynthetic capacity (V_cmax ) conformed to the proposed quantitative theory. Substantial hydraulic diversity was related to the trade-off between K_S and v_H . Leaf drought tolerance (inferred from turgor loss point, -Ψ_tlp ) increased with wood density, but the trade-off between hydraulic efficiency (K_S ) and -Ψ_tlp was weak. Plant trait effects on v_H were dominated by variation in K_S , while effects of environment were dominated by variation in temperature. This research unifies hydraulics, photosynthesis and the leaf economics spectrum in a common theoretical framework, and suggests a route towards the integration of photosynthesis and hydraulics in land-surface models.

Increased wood biomass growth is associated with lower wood density in Quercus petraea (Matt.) Liebl. saplings growing under elevated CO2

Atmospheric carbon dioxide (CO2) has increased substantially since the industrial revolution began, and physiological responses to elevated atmospheric CO2 concentrations reportedly alter the biometry and wood structure of trees. Additionally, soil nutrient availability may play an important role in regulating these responses. Therefore, in this study, we grew 288 two-year-old saplings of sessile oak (Quercus petraea (Matt.) Liebl.) in lamellar glass domes for three years to evaluate the effects of CO2 concentrations and nutrient supply on above- and belowground biomass, wood density, and wood structure. Elevated CO2 increased above- and belowground biomass by 44.3% and 46.9%, respectively. However, under elevated CO2 treatment, sapling wood density was markedly lower (approximately 1.7%), and notably wider growth rings-and larger, more efficient conduits leading to increased hydraulic conductance-were observed. Moreover, despite the vessels being larger in saplings under elevated CO2, the vessels were significantly fewer (p = 0.023). No direct effects of nutrient supply were observed on biomass growth, wood density, or wood structure, except for a notable decrease in specific leaf area. These results suggest that, although fewer and larger conduits may render the xylem more vulnerable to embolism formation under drought conditions, the high growth rate in sessile oak saplings under elevated CO2 is supported by an efficient vascular system and may increase biomass production in this tree species. Nevertheless, the decreased mechanical strength, indicated by low density and xylem vulnerability to drought, may lead to earlier mortality, offsetting the positive effects of elevated CO2 levels in the future.

AusTraits, a curated plant trait database for the Australian flora

We introduce the AusTraits database - a compilation of values of plant traits for taxa in the Australian flora (hereafter AusTraits). AusTraits synthesises data on 448 traits across 28,640 taxa from field campaigns, published literature, taxonomic monographs, and individual taxon descriptions. Traits vary in scope from physiological measures of performance (e.g. photosynthetic gas exchange, water-use efficiency) to morphological attributes (e.g. leaf area, seed mass, plant height) which link to aspects of ecological variation. AusTraits contains curated and harmonised individual- and species-level measurements coupled to, where available, contextual information on site properties and experimental conditions. This article provides information on version 3.0.2 of AusTraits which contains data for 997,808 trait-by-taxon combinations. We envision AusTraits as an ongoing collaborative initiative for easily archiving and sharing trait data, which also provides a template for other national or regional initiatives globally to fill persistent gaps in trait knowledge.

Coordinated variation in stem and leaf functional traits of temperate broadleaf tree species in the isohydric-anisohydric spectrum

Stomatal regulation serves as an important strategy for plants to adapt to drought. However, the understanding of how complexes of plant-functional traits vary along the continuum from isohydry to anisohydry remains insufficient. In this study, we investigated a proxy of the degree of iso/anisohydry-the water potential at stomatal closure-and a series of functional traits of leaves and branches in 20 temperate broadleaf species planted in an arid limestone habitat in northern China. The results showed that the water potential at stomatal closure was significantly correlated with many functional traits. At the anisohydric end of the spectrum, species had a higher leaf carbon content and vein density, a greater stomatal length, a thicker lower leaf epidermis, higher embolism resistance, higher wood density, a greater Huber value, a greater ratio of fiber wall thickness to xylem lumen diameter, a larger proportion of total fiber wall area to xylem cross-sectional area, a lower water potential at the turgor loss point (TLP), a smaller relative water content at the TLP, a lower osmotic potential at full turgor and a smaller specific leaf area. It is concluded that a continuum of coordination and trade-offs among co-evolved anatomical and physiological traits gives rise to the spectrum from isohydry to anisohydry spanned by the 20 tree species, and the anisohydric species showed stronger stress resistance, with greater investment in stems and leaves than the isohydric species to maintain stomatal opening under drought conditions.

Molecular Genetic Characteristics of Different Scenarios of Xylogenesis on the Example of Two Forms of Silver Birch Differing in the Ratio of Structural Elements in the Xylem

Silver birch (Betula pendula Roth) is an economically important species in Northern Europe. The current research focused on the molecular background of different xylogenesis scenarios in the birch trunks. The study objects were two forms of silver birch, silver birch trees, and Karelian birch trees; the latter form is characterized by the formation of two types of wood, non-figured (straight-grained) and figured, respectively, while it is currently not clear which factors cause this difference. We identified VND/NST/SND genes that regulate secondary cell wall biosynthesis in the birch genome and revealed differences in their expression in association with the formation of xylem with different ratios of structural elements. High expression levels of BpVND7 accompanied differentiation of the type of xylem which is characteristic of the species. At the same time, the appearance of figured wood was accompanied by the low expression levels of the VND genes and increased levels of expression of NST and SND genes. We identified BpARF5 as a crucial regulator of auxin-dependent vascular patterning and its direct target—BpHB8. A decrease in the BpARF5 level expression in differentiating xylem was a specific characteristic of both Karelian birch with figured and non-figured wood. Decreased BpARF5 level expression in non-figured trees accompanied by decreased BpHB8 and VND/NST/SND expression levels compared to figured Karelian birch trees. According to the results obtained, we suggested silver birch forms differing in wood anatomy as valuable objects in studying the regulation of xylogenesis.

Living on the edge: A continental-scale assessment of forest vulnerability to drought

Globally, forests are facing an increasing risk of mass tree mortality events associated with extreme droughts and higher temperatures. Hydraulic dysfunction is considered a key mechanism of drought-triggered dieback. By leveraging the climate breadth of the Australian landscape and a national network of research sites (Terrestrial Ecosystem Research Network), we conducted a continental-scale study of physiological and hydraulic traits of 33 native tree species from contrasting environments to disentangle the complexities of plant response to drought across communities. We found strong relationships between key plant hydraulic traits and site aridity. Leaf turgor loss point and xylem embolism resistance were correlated with minimum water potential experienced by each species. Across the data set, there was a strong coordination between hydraulic traits, including those linked to hydraulic safety, stomatal regulation and the cost of carbon investment into woody tissue. These results illustrate that aridity has acted as a strong selective pressure, shaping hydraulic traits of tree species across the Australian landscape. Hydraulic safety margins were constrained across sites, with species from wetter sites tending to have smaller safety margin compared with species at drier sites, suggesting trees are operating close to their hydraulic thresholds and forest biomes across the spectrum may be susceptible to shifts in climate that result in the intensification of drought.

Increasing axial parenchyma fraction in the Malagasy Magnoliids facilitated the co-optimisation of hydraulic efficiency and safety

The evolution of angiosperms was accompanied by the segregation and specialisation of their xylem tissues. This study aimed to determine whether the fraction and arrangement of parenchyma tissue influence the hydraulic efficiency-safety trade-off in the basal angiosperms. We examined xylem anatomical structure and hydraulic functioning of 28 woody species of Magnoliids in a tropical rainforest of Madagascar and reported, for the first time, quantitative measurements that support the relationship between vessel-to-xylem parenchyma connectivity and the hydraulic efficiency-safety trade-off. We also introduced a new measurement - the distance of species from the trade-off limit - to quantify the co-optimisation of hydraulic efficiency and safety. Although the basal angiosperms in this study had low hydraulic conductivity and safety, species with higher axial parenchyma fraction (APf) had significantly higher hydraulic conductivity. Hydraulic efficiency-safety optimisation was accompanied by higher APf and vessel-to-axial parenchyma connectivity. Conversely, species exhibiting high ray parenchyma fraction and high vessel-to-ray connectivity had lower K_s and were further away from the hydraulic trade-off limit line. Our results provide evidence that axial parenchyma fraction and paratracheal arrangement are associated with both enhanced hydraulic efficiency and safety.

Functional trait coordination in the ancient and nutrient-impoverished campo rupestre: soil properties drive stem, leaf and architectural traits

Old, climatically buffered and infertile landscapes (OCBILs) are remarkably species-diverse, but the assembly of their ecological communities is largely unknown. Our goal was to understand how edaphic filters drive the functional structure of plant communities in an ancient and nutrient-impoverished ecosystem. We carried out a functional screening across four types of campo rupestre habitats with different edaphic conditions. We investigated trait–soil relationships for ironstone and quartzitic substrate to obtain the optimal trait values of each condition. In addition, we built unipartite networks to explore trait–trait relationships to assess functional coordination among organs. Lower soil pH and less soil water retention potential increased the proportion of smaller leaves, tissue dry mass and tissue density, resulting in more resource-conservative plant species and communities. Trait functions were tightly correlated among organs at both the plot and the individual level, indicating a trend of phenotypic integration. Architectural traits were central to coordination, suggesting their key role in integrating sap transport, mechanical support and leaf display. We conclude that the trait adjustments in response to soil parameters are important for the coexistence of a large number of species in the campo rupestre ecosystem.

Wood allocation trade-offs between fiber wall, fiber lumen, and axial parenchyma drive drought resistance in neotropical trees

Functional relationships between wood density and measures of xylem hydraulic safety and efficiency are ambiguous, especially in wet tropical forests. In this meta-analysis, we move beyond wood density per se and identify relationships between xylem allocated to fibers, parenchyma, and vessels and measures of hydraulic safety and efficiency. We analyzed published data of xylem traits, hydraulic properties and measures of drought resistance from neotropical tree species retrieved from 346 sources. We found that xylem volume allocation to fiber walls increases embolism resistance, but at the expense of specific conductivity and sapwood capacitance. Xylem volume investment in fiber lumen increases capacitance, while investment in axial parenchyma is associated with higher specific conductivity. Dominant tree taxa from wet forests prioritize xylem allocation to axial parenchyma at the expense of fiber walls, resulting in a low embolism resistance for a given wood density and a high vulnerability to drought-induced mortality. We conclude that strong trade-offs between xylem allocation to fiber walls, fiber lumen, and axial parenchyma drive drought resistance in neotropical trees. Moreover, the benefits of xylem allocation to axial parenchyma in wet tropical trees might not outweigh the consequential low embolism resistance under more frequent and severe droughts in a changing climate.

Biochar made from low density wood has greater plant available water than biochar made from high density wood

Soil water limitations often restrict plant growth in unirrigated agricultural, forestry and urban systems. Biochar amendment to soils can increase water retention, but not all of this additional water is necessarily available to plants. Differences in the effectiveness of biochar in ameliorating soil water limitations may be a result of differences in feedstock cell structure. Previous research has shown that feedstock cell structure influences the pore structure of biochar and consequently the volume available for water storage. The availability of this water for plant uptake will be determined by biochar pore diameters, given its role in determining capillary forces which plants must overcome to access pore water. Therefore, we hypothesized that differences in hardwood feedstock cell structure would result in differences in the plant available water holding capacity of biochar. Before pyrolysis, we measured the wood morphology of 18 Eucalyptus species on three replicates of equal age on a gradient of wood density (572-960 kg m^-3). Wood samples were then pyrolysed (550 °C) and the resulting biochars were sieved and their particle size distribution was standardised before their physical properties, including water holding capacity, plant available water and bulk density were measured. Our results show that biochar made from lower density eucalypt wood had up to 35% greater water holding capacity and up to 45% greater plant available water than biochar made from higher density eucalypt wood. Further, feedstock wood density related well to fibre cell wall thickness and fibre lumen diameter. Therefore, wood density could be used as a proxy for wood cell structure, which can in turn be used to predict plant available water in biochar. The simple measure of feedstock wood density can inform feedstock choices for producing biochars with greater plant available water, optimal for the use as soil amendment in water limited environments.

Parenchyma Abundance in Wood of Evergreen Trees Varies Independently of Nutrients

The abundance of living cells in wood-mainly as interconnected axial and ray parenchyma networks-varies widely between species. However, the functional significance of this variation and its role in plant ecological strategies is poorly understood, as is the extent to which different parenchyma fractions are favored in relation to soil nutrients and hydraulic functions. We analyzed wood tissue fractions of 16 Australian angiosperm species sampled from two nearby areas with similar climate but very different soil nutrient profiles and investigated structure-function links with soil and tissue nutrient concentrations and other plant traits. We expected the variation in parenchyma fractions to influence nutrient concentrations in wood xylem, and to find species with lower parenchyma fractions and accordingly lower nutrient requirements on lower-nutrient soils. Surprisingly, both axial and ray parenchyma fractions were mostly unrelated to tissue and soil nutrient concentrations, except for nitrogen concentration in stem sapwood. Species from low nutrient soils showed higher fractional P translocation from both leaves and sapwood, but little patterning with respect to tissue nitrogen. While species from high and low nutrient soils clearly clustered along the soil-fertility axis, their tissue composition varied independently from plant functional traits related to construction costs and hydraulic anatomy. Our findings imply that there is considerable variation among species in the nutrient concentrations within different parenchyma tissues. The anatomical composition of wood tissue seems unrelated to plant nutrient requirements. Even though xylem parenchyma is involved in metabolic functions such as nutrient translocation and storage, parenchyma abundance on its own does not directly explain variation in these functions, even in co-occurring species. While parenchyma is highly abundant in wood of angiosperm trees, we are still lacking a convincing ecological interpretation of its variability and role in whole-tree nutrient budgets.

Leveraging Signatures of Plant Functional Strategies in Wood Density Profiles of African Trees to Correct Mass Estimations From Terrestrial Laser Data

Wood density (WD) relates to important tree functions such as stem mechanics and resistance against pathogens. This functional trait can exhibit high intraindividual variability both radially and vertically. With the rise of LiDAR-based methodologies allowing nondestructive tree volume estimations, failing to account for WD variations related to tree function and biomass investment strategies may lead to large systematic bias in AGB estimations. Here, we use a unique destructive dataset from 822 trees belonging to 51 phylogenetically dispersed tree species harvested across forest types in Central Africa to determine vertical gradients in WD from the stump to the branch tips, how these gradients relate to regeneration guilds and their implications for AGB estimations. We find that decreasing WD from the tree base to the branch tips is characteristic of shade-tolerant species, while light-demanding and pioneer species exhibit stationary or increasing vertical trends. Across all species, the WD range is narrower in tree crowns than at the tree base, reflecting more similar physiological and mechanical constraints in the canopy. Vertical gradients in WD induce significant bias (10%) in AGB estimates when using database-derived species-average WD data. However, the correlation between the vertical gradients and basal WD allows the derivation of general correction models. With the ongoing development of remote sensing products providing 3D information for entire trees and forest stands, our findings indicate promising ways to improve greenhouse gas accounting in tropical countries and advance our understanding of adaptive strategies allowing trees to grow and survive in dense rainforests.

TRY plant trait database - enhanced coverage and open access

Plant traits-the morphological, anatomical, physiological, biochemical and phenological characteristics of plants-determine how plants respond to environmental factors, affect other trophic levels, and influence ecosystem properties and their benefits and detriments to people. Plant trait data thus represent the basis for a vast area of research spanning from evolutionary biology, community and functional ecology, to biodiversity conservation, ecosystem and landscape management, restoration, biogeography and earth system modelling. Since its foundation in 2007, the TRY database of plant traits has grown continuously. It now provides unprecedented data coverage under an open access data policy and is the main plant trait database used by the research community worldwide. Increasingly, the TRY database also supports new frontiers of trait-based plant research, including the identification of data gaps and the subsequent mobilization or measurement of new data. To support this development, in this article we evaluate the extent of the trait data compiled in TRY and analyse emerging patterns of data coverage and representativeness. Best species coverage is achieved for categorical traits-almost complete coverage for 'plant growth form'. However, most traits relevant for ecology and vegetation modelling are characterized by continuous intraspecific variation and trait-environmental relationships. These traits have to be measured on individual plants in their respective environment. Despite unprecedented data coverage, we observe a humbling lack of completeness and representativeness of these continuous traits in many aspects. We, therefore, conclude that reducing data gaps and biases in the TRY database remains a key challenge and requires a coordinated approach to data mobilization and trait measurements. This can only be achieved in collaboration with other initiatives.

Respiratory costs of producing and maintaining stem biomass in eight co-occurring tree species

Given the importance of carbon allocation for plant performance and fitness, it is expected that competition and abiotic stress influence respiratory costs associated with stem wood biomass production and maintenance. In this study, stem respiration (R) was measured together with stem diameter increment in adult trees of eight co-occurring species in a sub-Mediterranean forest stand for 2 years. We estimated growth R (Rg), maintenance R (Rm) and the growth respiration coefficient (GRC) using two gas exchange methods: (i) estimating Rg as the product of growth and GRC (then Rm as R minus Rg) and (ii) estimating Rm from temperature-dependent kinetics of basal Rm at the dormant season (then Rg as R minus Rm). In both cases, stem basal-area growth rates governed intra-annual variation in R, Rg and Rm. Maximum annual Rm occurred slightly before or after maximum Rg. The mean contribution of Rm to R during the growing season ranged from 56% to 88% across species using method 1 and from 23% to 66% using method 2. An analysis accounting for the phylogenetic distance among species indicated that more shade-tolerant, faster growing species exhibited higher Rm and Rg than less shade-tolerant, slower growing ones, suggesting a balance between carbon supply and demand mediated by growth. However, GRC was not related to species growth rate, wood density, or drought and shade tolerance across the surveyed species nor across 27 tree species for which GRC was compiled. The GRC estimates based on wood chemical analysis were lower (0.19) than those based on gas exchange methods (0.35). These results give partial support to the hypothesis that wood production and maintenance costs are related to species ecology and highlight the divergence of respiratory parameters widely used in plant models according to the methodological approach applied to derive them.

Mechanical properties and structure-function trade-offs in secondary xylem of young roots and stems

Bending and torsional properties of young roots and stems were measured in nine woody angiosperms. The variation in mechanical parameters was correlated to wood anatomical traits and analysed with respect to the other two competing functions of xylem (namely storage and hydraulics). Compared with stems, roots exhibited five times greater flexibility in bending and two times greater flexibility in torsion. Lower values of structural bending and structural torsional moduli (Estr and Gstr, respectively) of roots compared with stems were associated with the presence of thicker bark and a greater size of xylem cells. Across species, Estr and Gstr were correlated with wood density, which was mainly driven by the wall thickness to lumen area ratio of fibres. Higher fractions of parenchyma did not translate directly into a lower wood density and reduced mechanical stiffness in spite of parenchyma cells having thinner, and in some cases less lignified, cell walls than fibres. The presence of wide, partially non-lignified rays contributed to low values of Estr and Gstr in Clematis vitalba. Overall, our results demonstrate that higher demands for mechanical stability in self-supporting stems put a major constraint on xylem structure, whereas root xylem can be designed with a greater emphasis on both storage and hydraulic functions.

Does fertilization explain the extraordinary hydraulic behaviour of apple trees?

Fertilization of woody plants plays a central role in agriculture and forestry, but little is known about how plant water relations are thereby affected. Here we investigated the impact of fertilization on tree hydraulics, and xylem and pit anatomy in the high-yield apple cultivars Golden and Red Delicious. In fertilized trees of Golden Delicious, specific hydraulic conductivity of branch xylem, hydraulic conductance of the root system, and maximum stomatal conductance increased considerably. In Red Delicious, differences between fertilized and control trees were less pronounced. In both cultivars, xylem embolism resistance of fertilized trees was significantly lower and stomatal closure occurred at lower water potentials. Furthermore, water potential at turgor loss point and osmotic potential at full saturation were higher and cell wall elasticity was lower in fertilized plants, suggesting reduced drought tolerance of leaves. Anatomical differences were observed regarding conduit diameters, cell wall reinforcement, pit membrane thickness, pit chamber depth, and stomatal pore length, with more pronounced differences in Golden Delicious. The findings reveal altered hydraulic behaviour in both apple cultivars upon fertilization. The increased vulnerability to hydraulic failure might pose a considerable risk for apple productivity under a changing climate, which should be considered for future cultivation and management practices.

Wood Density Profiles and Their Corresponding Tissue Fractions in Tropical Angiosperm Trees

Wood density profiles reveal a tree’s life strategy and growth. Density profiles are, however, rarely defined in terms of tissue fractions for wood of tropical angiosperm trees. Here, we aim at linking these fractions to corresponding density profiles of tropical trees from the Congo Basin. Cores of 8 tree species were scanned with X-ray Computed Tomography to calculate density profiles. Then, cores were sanded and the outermost 3 cm were used to semi-automatically measure vessel lumen, parenchyma and fibre fractions using the Weka segmentation tool in ImageJ. Fibre wall and lumen widths were measured using a newly developed semi-automated method. An assessment of density variation in function of growth ring boundary detection is done. A mixed regression model estimated the relative contribution of each trait to the density, with a species effect on slope and intercept of the regression. Position-dependent correlations were made between the fractions and the corresponding wood density profile. On average, density profile variation mostly reflects variations in fibre lumen and wall fractions, but these are species- and position-dependent: on some positions, parenchyma and vessels have a more pronounced effect on density. The model linking density to traits explains 92% of the variation, with 65% of the density profile variation attributed to the three measured traits. The remaining 27% is explained by species as a random effect. There is a clear variation between trees and within trees that have implications for interpreting density profiles in angiosperm trees: the exact driving anatomical fraction behind every density value will depend on the position within the core. The underlying function of density will thus vary accordingly.

Xylem adjusts to maintain efficiency across a steep precipitation gradient in two coexisting generalist species

BACKGROUND AND AIMS

Trees adjust the configuration of their conductive system in response to changes in water availability, maximizing efficiency in wet environments and increasing safety in dry habitats. However, evidence of this general trend is not conclusive. Generalist species growing across broad climatic gradients provide an ideal framework to assess intra-specific xylem adjustments under contrasting environmental conditions. Our aims were to compare the response of xylem traits to variations in precipitation of two co-occurring generalist tree species, and to assess climate control on xylem trait variability and co-ordination.

METHODS

We evaluated xylem traits of Embothrium coccineum (Proteaceae, evergreen) and Nothofagus antarctica (Nothofagaceae, deciduous) in three areas across an abrupt precipitation gradient, from 500 to 2500 mm, in southern Chile. We measured wood density, vessel lumen area and density, percentage of conductive area and vessel grouping, and estimated the hydraulic function from anatomical measurements in 60 individuals per species.

KEY RESULTS

Both species shared a common pattern of response along the precipitation gradient, with an increase in vessel density with dryness, but without changes in estimated hydraulic conductivity. Xylem traits in E. coccineum were more variable and more responsive to the climate gradient, decreasing vessel lumen area and increasing wood density, whereas vessel grouping showed contrasting patterns between species. Additionally, the analysis of trait co-ordination at the individual level revealed a tighter co-ordination among xylem traits in E. coccineum.

CONCLUSIONS

Estimated xylem efficiency was maintained in combination with different levels of expected xylem safety within species. Reduction in vessel lumen area was compensated through large increases in vessel density, thus breaking the trade-off between xylem efficiency and safety. Otherwise, the existence of alternative internal adjustments in coexisting species to face similar climatic constraints might increase resilience of temperate forests against unpredictable changes in climatic conditions.

Can traits predict individual growth performance? A test in a hyperdiverse tropical forest

The functional trait approach has, as a central tenet, that plant traits are functional and shape individual performance, but this has rarely been tested in the field. Here, we tested the individual-based trait approach in a hyperdiverse Amazonian tropical rainforest and evaluated intraspecific variation in trait values, plant strategies at the individual level, and whether traits are functional and predict individual performance. We evaluated > 1300 tree saplings belonging to > 383 species, measured 25 traits related to growth and defense, and evaluated the effects of environmental conditions, plant size, and traits on stem growth. A total of 44% of the trait variation was observed within species, indicating a strong potential for acclimation. Individuals showed two strategy spectra, related to tissue toughness and organ size vs leaf display. In this nutrient- and light-limited forest, traits measured at the individual level were surprisingly poor predictors of individual growth performance because of convergence of traits and growth rates. Functional trait approaches based on individuals or species are conceptually fundamentally different: the species-based approach focuses on the potential and the individual-based approach on the realized traits and growth rates. Counterintuitively, the individual approach leads to a poor prediction of individual performance, although it provides a more realistic view on community dynamics.

Insights into intraspecific wood density variation and its relationship to growth, height and elevation in a treeline species

The wood economics spectrum provides a general framework for interspecific trait-trait coordination across wide environmental gradients. Whether global patterns are mirrored within species constitutes a poorly explored subject. In this study, I first determined whether wood density co-varies together with elevation, tree growth and height at the within-species level. Second, I determined the variation of wood density in different stem parts (trunk, branch and twigs). In situ trunk sapwood, trunk heartwood, branch and twig densities, in addition to stem growth rates and tree height were determined in adult trees of Nothofagus pumilio at four elevations in five locations spanning 18° of latitude. Mixed effects models were fitted to test relationships among variables. The variation in wood density reported in this study was narrow (ca. 0.4-0.6 g cm^-3 ) relative to global density variation (ca. 0.3-1.0 g cm^-3 ). There was no significant relationship between stem growth rates and wood density. Furthermore, the elevation gradient did not alter the wood density of any stem part. Trunk sapwood density was negatively related to tree height. Twig density was higher than branch and trunk densities. Trunk heartwood density was always significantly higher than sapwood density. Negative across-species trends found in the growth-wood density relationship may not emerge as the aggregate of parallel intraspecific patterns. Actually, trees with contrasting growth rates show similar wood density values. Tree height, which is tightly related to elevation, showed a negative relationship with sapwood density.

Functional relationships between wood structure and vulnerability to xylem cavitation in races of Eucalyptus globulus differing in wood density

Wood density can be considered as a measure of the internal wood structure, and it is usually used as a proxy measure of other mechanical and functional traits. Eucalyptus is one of the most important commercial forestry genera worldwide, but the relationship between wood density and vulnerability to cavitation in this genus has been little studied. The analysis is hampered by, among other things, its anatomical complexity, so it becomes necessary to address more complex techniques and analyses to elucidate the way in which the different anatomical elements are functionally integrated. In this study, vulnerability to cavitation in two races of Eucalyptus globulus Labill. with different wood density was evaluated through Path analysis, a multivariate method that allows evaluation of descriptive models of causal relationship between variables. A model relating anatomical variables with wood properties and functional parameters was proposed and tested. We found significant differences in wood basic density and vulnerability to cavitation between races. The main exogenous variables predicting vulnerability to cavitation were vessel hydraulic diameter and fibre wall fraction. Fibre wall fraction showed a direct impact on wood basic density and the slope of vulnerability curve, and an indirect and negative effect over the pressure imposing 50% of conductivity loss (P50) through them. Hydraulic diameter showed a direct negative effect on P50, but an indirect and positive influence over this variable through wood density on one hand, and through maximum hydraulic conductivity (ks max) and slope on the other. Our results highlight the complexity of the relationship between xylem efficiency and safety in species with solitary vessels such as Eucalyptus spp., with no evident compromise at the intraspecific level.