Nanoparticles, human health hazard and regulation

Nanoliposomes for Controlled Release of Cannabinodiol at Relevant Gastrointestinal Conditions

Cannabidiol (CBD) has significant therapeutic potential; nevertheless, its advance as an effective drug by the pharmaceutical business is hindered by its inherent characteristics, such as low bioavailability, low water solubility, and variable pharmacokinetic profiles. This research aimed to develop nanoliposomes using an easy and low-cost method to improve the hydrosolubility of CBD and achieve a controlled delivery of the active principle under relevant physiological conditions from the mouth to the intestine; the cytotoxic and antitumor activities were also evaluated. To achieve the objective, core-shell nanoliposomes based on CBD were synthesized in three easy steps and characterized in terms of shape, size, surface chemistry, thermal capacity, and surface charge density through transmission electron microscopy (TEM), dynamic light scattering (DLS), Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), and potential charge (PZ), respectively. CBD-controlled delivery trials were carried out under simulated mouth-duodenal conditions and fitted to Korsmeyer-Peppas and Noyes-Whitney models to conclude about the pharmacokinetics of CBD from nano-CBD. Cytotoxicity studies on nonmalignant human keratinocytes (HaCaT) were carried out to evaluate its safety and the recommended consumption dose, and finally, the antiproliferative capacity of nano-CBD on human colon carcinoma cells (SW480) was determined as beginning proposal for cancer treatment. The characterization results verified the water solubility for the CBD nanoencapsulated, the core-shell structure, the size in the nanometric regime, and the presence of the synthesis components. The dissolution rate at duodenal conditions was higher than that in buccal and stomach environments, respectively, and this behavior was associated with the shell (lecithin) chemical structure, which destabilizes at pH above 7.2, allowing the release by non-Fickian diffusion of CBD as corroborated by the Korsmeyer-Peppas model. In vitro biological tests revealed the innocuousness and cyto-security of nano-CBD up to 1000 mg·L-1 when evaluated on HaCaT cells and concentrations higher than 1000 mg·L-1 showed antitumor activity against human colon carcinoma cells (SW480) taking the first step as a chemotherapeutic proposal. These results are unprecedented and propose a selective delivery system based on nano-CBD at low cost and that provides a new form of administration and chemo treatment.

Macrophage Polarization Status Impacts Nanoceria Cellular Distribution but Not Its Biotransformation or Ferritin Effects

The innate immune system is the first line of defense against external threats through the initiation and regulation of inflammation. Macrophage differentiation into functional phenotypes influences the fate of nanomaterials taken up by these immune cells. High-resolution electron microscopy was used to investigate the uptake, distribution, and biotransformation of nanoceria in human and murine M1 and M2 macrophages in unprecedented detail. We found that M1 and M2 macrophages internalize nanoceria differently. M1-type macrophages predominantly sequester nanoceria near the plasma membrane, whereas nanoceria are more uniformly distributed throughout M2 macrophage cytoplasm. In contrast, both macrophage phenotypes show identical nanoceria biotransformation to cerium phosphate nanoneedles and simultaneous nanoceria with ferritin co-precipitation within the cells. Ferritin biomineralization is a direct response to nanoparticle uptake inside both macrophage phenotypes. We also found that the same ferritin biomineralization mechanism occurs after the uptake of Ce-ions into polarized macrophages and into unpolarized human monocytes and murine RAW 264.7 cells. These findings emphasize the need for evaluating ferritin biomineralization in studies that involve the internalization of nano objects, ranging from particles to viruses to biomolecules, to gain greater mechanistic insights into the overall immune responses to nano objects.

The toxicity of nanoparticles and their interaction with cells: an in vitro metabolomic perspective

Nowadays, nanomaterials (NMs) are widely present in daily life due to their significant benefits, as demonstrated by their application in many fields such as biomedicine, engineering, food, cosmetics, sensing, and energy. However, the increasing production of NMs multiplies the chances of their release into the surrounding environment, making human exposure to NMs inevitable. Currently, nanotoxicology is a crucial field, which focuses on studying the toxicity of NMs. The toxicity or effects of nanoparticles (NPs) on the environment and humans can be preliminary assessed in vitro using cell models. However, the conventional cytotoxicity assays, such as the MTT assay, have some drawbacks including the possibility of interference with the studied NPs. Therefore, it is necessary to employ more advanced techniques that provide high throughput analysis and avoid interferences. In this case, metabolomics is one of the most powerful bioanalytical strategies to assess the toxicity of different materials. By measuring the metabolic change upon the introduction of a stimulus, this technique can reveal the molecular information of the toxicity induced by NPs. This provides the opportunity to design novel and efficient nanodrugs and minimizes the risks of NPs used in industry and other fields. Initially, this review summarizes the ways that NPs and cells interact and the NP parameters that play a role in this interaction, and then the assessment of these interactions using conventional assays and the challenges encountered are discussed. Subsequently, in the main part, we introduce the recent studies employing metabolomics for the assessment of these interactions in vitro.

Automated analysis of transmission electron micrographs of metallic nanoparticles by machine learning

Metallic nanoparticles were analysed with respect to size and shape by a machine learning approach. This involved a separation of particles from the background (segmentation), a separation of overlapping particles, and the identification of individual particles. An algorithm to separate overlapping particles, based on ultimate erosion of convex shapes (UECS), was implemented. Finally, particle properties like size, circularity, equivalent diameter, and Feret diameter were computed for each particle of the whole particle population. Thus, particle size distributions can be easily created based on the various parameters. However, strongly overlapping particles are difficult and sometimes impossible to separate because of an a priori unknown shape of a particle that is partially lying in the shadow of another particle. The program is able to extract information from a sequence of images of the same sample, thereby increasing the number of analysed nanoparticles to several thousands. The machine learning approach is well-suited to identify particles at only limited particle-to-background contrast as is demonstrated for ultrasmall gold nanoparticles (2 nm).

Combustion conditions and feed coals regulating the Fe- and Ti-containing nanoparticles in various coal fly ash

Quantitative characteristics and sizes of nanoparticles (NPs) in coal fly ash (CFA) produced in coal-fired power plants as a function of coal type and plant design will help reveal the NP emission likelihood and their environmental implications. However, little is known about how combustion conditions and types of coal regulate the NP abundance in CFAs. In this study, based on single particle (SP)-ICP-MS technology, particle number concentrations (PNCs) and sizes of Fe- and Ti-containing NPs in CFAs were determined for samples collected from power plants of different designs and burning different types of coal. The PNCs of Fe- and Ti-containing NPs in all CFAs measured were in the range of 1.3 × 10⁷ - 3.4 × 10⁸ and 6.8 × 10⁶ - 2.2 × 10⁸ particles/mg, with the average particle sizes of 111 nm and 87 nm, respectively. The highest Fe-NP PNCs likely relate to the highest contents of Fe and pyrite in the feed coal. In addition, high TOC in CFAs are associated with metal-containing NPs, resulting in elevated abundances of these NPs with relatively large sizes. Moreover, elevated PNCs of NPs were found in CFAs produced by coal-fired power plants burning low-rank coals and with small installed capacity (especially those under 100-MW units). Compared to cyclone filters, ESPs and FFs with higher removal efficiency typically retain more Fe-/Ti- containing NPs with smaller sizes. Based on a structural equation (SE) model, raw coal properties (coal rank and Fe/Ti content), boiler types, and efficiency of particulate emission control devices likely indirectly affect PNCs of Fe- and Ti-containing NPs by influencing TOC contents and their corresponding metal concentrations of CFAs. This study provides the first analytic and comprehensive information concerning the direct and indirect regulating factors on NPs in various CFAs.

Nanoparticle formulations: A smart era of advanced treatment with nanotoxicological imprints on the human body

In the modern era, nanoparticles are the preferred dosage form, and maximum research is going on in the field of nanoparticle formulations. But as they are so small, nanoparticles are able to slip through the body's defenses and cause damage to the organs and tissues deep inside. In recent years, most researchers have focused solely on the therapeutic value of drugs or, at times, the performance of dosage forms, but few have given toxicity studies equal weight in their research. This review demonstrates that nanoparticle formulations are not suitable from a safety standpoint. So, researchers should be focused on alternative formulations like nanoemulsion, nanogel, and other liquids as well as semisolid formulations.

Atmospheric micro (nano) plastics: future growing concerns for human health

ABSTRACT

Plastics are an integral but largely inconspicuous part of daily human routines. The present review paper uses cross-disciplinary scientific literature to examine and assess the possible effects of nanoplastics (NPs) concerning microplastics (MPs) on human health and summarizes crucial areas for future research. Although research on the nature and consequences of MPs has seen a substantial rise, only limited studies have concentrated on the atmospheric nanosized polymeric particles. However, due to the intrinsic technological complications in separating and computing them, their existence has been difficult to determine correctly. There is a consensus that these are not only existing in the environment but can get directly released or as the outcome of weathering of larger fragments, and it is believed to be that combustion can be the tertiary source of polymeric particles. NPs can have harmful consequences on human health, and their exposure may happen via ingestion, inhalation, or absorption by the skin. The atmospheric fallout of micro (nano) plastics may be responsible for contaminating the environment. Apart from this, different drivers affect the concentration of micro (nano) plastics in every environment compartment like wind, water currents, vectors, soil erosion, run-off, etc. Their high specific surface for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. These NPs could potentially cause physical damage by the particles themselves and biological stress by NPs alone or by leaching additives. However, there is minimal understanding of the occurrence, distribution, abundance, and fate of NPs in the environment, partially due to the lack of suitable techniques for separating and identifying NPs from complex environmental matrices.

HIGHLIGHTS

Micro (nano) plastics generated may reach the soil, water, and atmospheric compartments.Atmospheric currents serve as a way to transport, leading to micro (nano) plastics pollution.Exposure to micro (nano) plastics may happen via ingestion, inhalation, or absorption by the skin.Nanoplastics may be environmentally more harmful than other plastic particles; the focus should be on defining the exact size range.Visual classification of micro (nano) plastics is poor in reliability and may also contribute to microplastics being misidentified.

Prospects of green nanotechnology for efficient management of neurodegenerative diseases

Current theranostics for neurodegenerative diseases (NDD) management are majorly symptomatic due to a lack of identification of early-stage biomarkers and the inefficiency of drugs to penetrate through the blood-brain barrier. Recently, the Neuro-nanotechnology interface has emerged as a potential strategy for diagnosis, monitoring, and treatment of NDDs owing to smaller particle size, high specific surface area, tunable physicochemical attributes and rich surface functionalities. However, toxicity and biocompatibility are two significant challenges restricting their commercial prospect in NDD management. On the contrary, green nanosystems fabricated using plant extracts, microorganisms, biome-based precursors, repurposed-byproducts, exosomes, and protein-based bio-nanomaterials are economical, eco-friendly, biocompatible and renewable due to the abundance of biodiversity. This prospect explores the novel and cutting-edge interface of green nanosystems and NDDs for developing diagnostic and implantable devices, targeted drug delivery strategies, surgical prostheses, therapeutics, treatment, nanoscaffolds for neurogeneration, and immunity development. Besides, it discusses the challenges, alternate solutions and advanced prospects of green nanosystems with the integration of modern-age technologies for the development of sustainable green Neuro-nanotechnology for efficient management of NDDs.

Aluminum oxide and zinc oxide induced nanotoxicity in rat brain, heart, and lung

Nanomaterials or nanoparticles are commonly used in the cosmetics, medicine, and food industries. Many researchers studied the possible side effects of several nanoparticles including aluminum oxide (Al2O3-nps) and zinc oxide nanoparticles (ZnO-nps). Although, there is limited information available on their direct or side effects, especially on the brain, heart, and lung functions. This study aimed to investigate the neurotoxicity, cardiotoxicity, and lung toxicity induced by Al2O3-nps and ZnO-nps or in combination via studying changes in gene expression, alteration in cytokine production, tumor suppressor protein p53, neurotransmitters, oxidative stress, and the histological and morphological changes. Obtained results showed that Al2O3-nps, ZnO-nps and their combination cause an increase in 8-hydroxy-2´-deoxyguanosine (8-OHdG), cytokines, p53, oxidative stress, creatine kinase, norepinephrine, acetylcholine (ACh), and lipid profile. Moreover, significant changes in the gene expression of mitochondrial transcription factor-A (mtTFA) and peroxisome proliferator activator receptor-gamma-coactivator-1alpha (PGC-1alpha) were also noted. On the other hand, a significant decrease in the levels of antioxidant enzymes, total antioxidant capacity (TAC), reduced glutathione (GSH), paraoxonase 1 (PON1), neurotransmitters (dopamine - DA, and serotonin - SER), and the activity of acetylcholine esterase (AChE) in the brain, heart, and lung were found. Additionally, these results were confirmed by histological examinations. The present study revealed that the toxic effects were more when these nanoparticle doses are used in combination. Thus, Al2O3-nps and ZnO-nps may behave as neurotoxic, cardiotoxic, and lung toxic, especially upon exposure to rats in combination.

Vast emission of Fe- and Ti-containing nanoparticles from representative coal-fired power plants in China and environmental implications

Coal combustion is considered an important source of atmospheric nanoparticles (NPs). However, the underlying information on the emission of NPs from coal-fired power plants (CFPPs) is still lacking. Along these lines, in this study, coal fly ashes (CFAs) were collected from different multi-stage particulate emission control devices (PECDs) in three representative CFPPs in China. The particle size and particle number concentration (PNC) of typical metal-containing NPs (Fe- and Ti-containing NPs) were analyzed by using the single-particle inductively coupled plasma mass (SP-ICP-MS) technology. By increasing the stage of PECDs, the mean particle sizes of NPs gradually declined and the PNCs of Fe- and Ti-containing NPs increased significantly. Specifically, the PNC of final-stage CFA was 3 - 8 times that of the first-stage CFA. A comparison of the electrostatic precipitators (ESPs), fabric filters (FFs), and electrostatic-fabric-integrated precipitators (EFIPs) showed that the state-of-the-art EFIPs exhibited a relatively good NP-removal efficiency with the highest PNCs. In addition, NP hourly emissions in all coal combustion by-products (CCPs) were further calculated in a typical CFPP. The total emissions of Fe- and Ti-containing NPs in all CCPs were 1.87 × 10¹⁸ and 1.57 × 10¹⁸ particles/h, respectively. NPs were mainly enriched in CFA trapped by PECDs (80% of total emissions). Although the mass of the CFA that escaped through the stack was extremely low, it contained the highest PNCs of Fe- and Ti-containing NPs of all CCPs, accounting for 3.41% and 1.67% of the corresponding total NP emissions. These NPs may also coexist with various toxic metals, such as Zn and Pb, and be released directly into the atmosphere, where they pose a potential risk to human health.

Immunomodulation, Toxicity, and Therapeutic Potential of Nanoparticles

Altered immune responses associated with human disease conditions, such as inflammatory and infectious diseases, cancers, and autoimmune diseases, are among the primary causes of morbidity across the world. A wealth of studies has demonstrated the efficiency of nanoparticles (NPs)-based immunotherapy strategies in different laboratory model systems. Nanoscale dimensions (<100 nm) enable NPs to have increased surface area to volume ratio, surface charge, and reactivity. Physicochemical properties along with the shapes, sizes, and elasticity influence the immunomodulatory response induced by NPs. In recent years, NPs-based immunotherapy strategies have attained significant focus in the context of cancers and autoimmune diseases. This rapidly growing field of nanomedicine has already introduced ~50 nanotherapeutics in clinical practices. Parallel to wide industrial applications of NPs, studies have raised concerns about their potential threat to the environment and human health. In past decades, a wealth of in vivo and in vitro studies has demonstrated the immunotoxicity potential of various NPs. Given that the number of engineered/designed NPs in biomedical applications is continuing to increase, it is pertinent to establish the toxicity profile for their safe and intelligent use in biomedical applications. The review is intended to summarize the NPs-induced immunomodulation pertaining to toxicity and therapeutic development in human health.

Evaluating nanobiomaterial-induced DNA strand breaks using the alkaline comet assay

Due to their unique chemical and physical properties, nanobiomaterials (NBMs) are extensively studied for applications in medicine and drug delivery. Despite these exciting properties, their small sizes also make them susceptible to toxicity. Whilst nanomaterial immunotoxicity and cytotoxicity are studied in great depth, there is still limited data on their potential genotoxicity or ability to cause DNA damage. In the past years, new medical device regulations, which came into place in 2020, were developed, which require the assessment of long-term NBM exposure; therefore, in recent years, increased attention is being paid to genotoxicity screening of these materials. In this article, and through an interlaboratory comparison (ILC) study conducted within the Horizon 2020 REFINE project, we assess five different NBM formulations, each with different uses, namely, a bio-persistent gold nanoparticle (AuNP), an IR-780 dye-loaded liposome which is used in deep tissue imaging (LipImage™815), an unloaded PACA polymeric nanoparticle used as a drug delivery system (PACA), and two loaded PACA NBMs, i.e. the cabazitaxel drug-loaded PACA (CBZ-PACA) and the NR668 dye-loaded PACA (NR668 PACA) for their potential to cause DNA strand breaks using the alkaline comet assay and discuss the current state of genotoxicity testing for nanomaterials. We have found through our interlaboratory comparison that the alkaline comet assay can be suitably applied to the pre-clinical assessment of NBMs, as a reproducible and repeatable methodology for assessing NBM-induced DNA damage.

Photocatalytic TiO2 nanomaterials as potential antimicrobial and antiviral agents: Scope against blocking the SARS-COV-2 spread

The whole world is struggling with current coronavirus pandemic that shows urgent need to develop novel technologies, medical innovations or innovative materials for controlling SARS-CoV-2 infection. The mode of infection of SARS-CoV-2 is still not well known and seems to spread through surface, air, and water. Therefore, the whole surrounding environment needs to be disinfected with continuous function. For that purpose, materials with excellent antiviral properties, cost effective, environmental friendly and practically applicable should be researched. Titanium dioxide (TiO₂) under ultraviolet light produces strong oxidative effect and is utilized as photocatalytic disinfectant in biomedical field. TiO₂ based photocatalysts are effective antimicrobial/antiviral agents under ambient conditions with potential to be used even in indoor environment for inactivation of bacteria/viruses. Interestingly, recent studies highlight the effective disinfection of SARS-CoV-2 using TiO₂ photocatalysts. Here, scope of TiO₂ photocatalysts as emerging disinfectant against SARS-CoV-2 infection has been discussed in view of their excellent antibacterial and antiviral activities against various bacteria and viruses (e.g. H1N1, MNV, HSV, NDV, HCoV etc.). The current state of development of TiO₂ based nano-photocatalysts as disinfectant shows their potential to combat with SARS-CoV-2 viral infection and are promising for any other such variants or viruses, bacteria in future studies.

Microplastics in the New Zealand Environment

It is a concern that microplastics have been discovered in the food sources and water that we consume. This research was to evaluate the methods to isolate microplastics from organisms and how much of the environment of New Zealand (NZ), which is one of the least polluted countries, is contaminated by microplastics. New Zealand green-lipped mussels (Perna canaliculus) are considered to be an important product in the NZ food industry. For this reason, the existence of microplastics in these were investigated. Tarakihi fish (Nemadactylus macropterus) take food near the bottom of ocean, so this fish can be an indicator of the contamination of microplastics denser than water. In addition, bottled water, tap water and sea salt samples were also investigated. To isolate solid particles in an animal body, its tissues were chemically digested. It was found that 10% (w/w) potassium hydroxide (KOH) was a practical digestive protocol on biological tissues since polymers such as polyethylene terephthalate (PET), high-density polyethylene (HDPE), low-density polyethylene (LDPE), polypropylene (PP) and polystyrene (PS) are relatively resistant to KOH. Thus, treating tissues with KOH can be considered a viable method to remove tissues and isolate microplastics. Nile red was used to stain the plastic particles from the samples for visual inspection. Fourier-transform infrared spectrometry (FTIR) was performed to identify the particles. It was evaluated that all those samples had traces of microplastics.

Carbon nanotubes in biomedical applications: current status, promises, and challenges

In the past decade, there has been phenomenal progress in the field of nanomaterials, especially in the area of carbon nanotubes (CNTs). In this review, we have elucidated a contemporary synopsis of properties, synthesis, functionalization, toxicity, and several potential biomedical applications of CNTs. Researchers have reported remarkable mechanical, electronic, and physical properties of CNTs which makes their applications so versatile. Functionalization of CNTs has been valuable in modifying their properties, expanding their applications, and reducing their toxicity. In recent years, the use of CNTs in biomedical applications has grown exponentially as they are utilized in the field of drug delivery, tissue engineering, biosensors, bioimaging, and cancer treatment. CNTs can increase the lifespan of drugs in humans and facilitate their delivery directly to the targeted cells; they are also highly efficient biocompatible biosensors and bioimaging agents. CNTs have also shown great results in detecting the SARS COVID-19 virus and in the field of cancer treatment and tissue engineering which is substantially required looking at the present conditions. The concerns about CNTs include cytotoxicity faced in in vivo biomedical applications and its high manufacturing cost are discussed in the review.

Superhydrophobicity and conductivity of polyester-conductive fabrics using alkaline hydrolysis

A superhydrophobic conductive fabric is developed to solve the problem of functional deterioration due to oxidation by air and water through alkaline hydrolysis and hydrophobic coating.

Metals and Metal-Nanoparticles in Human Pathologies: From Exposure to Therapy

An increasing number of pathologies correlates with both toxic and essential metal ions dyshomeostasis. Next to known genetic disorders (e.g., Wilson's Disease and β-Thalassemia) other pathological states such as neurodegeneration and diabetes are characterized by an imbalance of essential metal ions. Metal ions can enter the human body from the surrounding environment in the form of free metal ions or metal-nanoparticles, and successively translocate to different tissues, where they are accumulated and develop distinct pathologies. There are no characteristic symptoms of metal intoxication, and the exact diagnosis is still difficult. In this review, we present metal-related pathologies with the most common onsets, biomarkers of metal intoxication, and proper techniques of metal qualitative and quantitative analysis. We discuss the possible role of drugs with metal-chelating ability in metal dyshomeostasis, and present recent advances in therapies of metal-related diseases.

Genotoxicity Assessment of Metal-Based Nanocomposites Applied in Drug Delivery

Nanocomposites as drug delivery systems (e.g., metal nanoparticles) are being exploited for several applications in the biomedical field, from therapeutics to diagnostics. Green nanocomposites stand for nanoparticles of biocompatible, biodegradable and non-toxic profiles. When using metal nanoparticles for drug delivery, the question of how hazardous these "virus-sized particles" can be is posed, due to their nanometer size range with enhanced reactivity compared to their respective bulk counterparts. These structures exhibit a high risk of being internalized by cells and interacting with the genetic material, with the possibility of inducing DNA damage. The Comet Assay, or Single-Cell Gel Electrophoresis (SCGE), stands out for its capacity to detect DNA strand breaks in eukaryotic cells. It has huge potential in the genotoxicity assessment of nanoparticles and respective cells' interactions. In this review, the Comet assay is described, discussing several examples of its application in the genotoxicity evaluation of nanoparticles commonly administered in a set of routes (oral, skin, inhaled, ocular and parenteral administration). In the nanoparticles boom era, where guidelines for their evaluation are still very limited, it is urgent to ensure their safety, alongside their quality and efficacy. Comet assay or SCGE can be considered an essential tool and a reliable source to achieve a better nanotoxicology assessment of metal nanoparticles used in drug delivery.

Effects of Workers Exposure to Nanoparticles Studied by NMR Metabolomics

In this study, the effects of occupational exposure to nanoparticles (NPs) were studied by NMR metabolomics. Exhaled breath condensate (EBC) and blood plasma samples were obtained from a research nanoparticles-processing unit at a national research university. The samples were taken from three groups of subjects: samples from workers exposed to nanoparticles collected before and after shift, and from controls not exposed to NPs. Altogether, 60 1H NMR spectra of exhaled breath condensate (EBC) samples and 60 1H NMR spectra of blood plasma samples were analysed, 20 in each group. The metabolites identified together with binning data were subjected to multivariate statistical analysis, which provided clear discrimination of the groups studied. Statistically significant metabolites responsible for group separation served as a foundation for analysis of impaired metabolic pathways. It was found that the acute effect of NPs exposure is mainly reflected in the pathways related to the production of antioxidants and other protective species, while the chronic effect is manifested mainly in the alteration of glutamine and glutamate metabolism, and the purine metabolism pathway.

The genotoxic effects in the leukocytes of workers handling nanocomposite materials

The extensive development of nanotechnologies and nanomaterials poses a number of questions to toxicologists about the potential health risks of exposure to nanoparticles (NP). In this study, we analysed DNA damage in the leukocytes of 20 workers who were long-term exposed (18 ± 10 years) to NP in their working environment. Blood samples were collected in September 2016, before and after a shift, to assess (i) the chronic effects of NP on DNA (pre-shift samples) and (ii) the acute effects of exposure during the shift (the difference between pre- and post-shift samples). The samples from matched controls were taken in parallel with workers before the shift. Leukocytes were isolated from heparinised blood on a Ficoll gradient. The enzyme-modified comet assay (DNA formamido-pyrimidine-glycosylase and endonuclease III) demonstrated a considerable increase of both single- and double-strand breaks in DNA (DNA-SB) and oxidised bases when compared with the controls (2.4× and 2×, respectively). Acute exposure induced a further increase of DNA-SB. The welding and smelting of nanocomposites represented a higher genotoxic risk than milling and grinding of nanocomposite surfaces. Obesity appeared to be a factor contributing to an increased risk of oxidative damage to DNA. The data also indicated a higher susceptibility of males vs. females to NP exposure. The study was repeated in September 2017. The results exhibited similar trend, but the levels of DNA damage in the exposed subjects were lower compared to previous year. This was probably associated with lower exposure to NP in consequence of changes in nanomaterial composition and working operations. The further study involving also monitoring of personal exposures to NP is necessary to identify (i) the main aerosol components responsible for genotoxic effects in workers handling nanocomposites and (ii) the primary cause of gender differences in response to NP action.

Are biosynthesized nanomaterials toxic for the environment? Effects of perlite and CuO/perlite nanoparticles on unicellular algae Haematococcus pluvialis

The properties of nanomaterials such as perlite nanoparticles and their increased application have raised concerns about their probable toxic impacts on the aquatic ecosystems and algae. Here, a novel biochemical synthesis and immobilization of CuO is reported on perlite nanoparticles (CuO/Per-NPs) and its toxic effect on alga has been compared with nanoperlites. This biosynthesis of CuO/Per-NPs performed using phytochemicals of Haematococcus pluvialis, Sargassum angustifolium, and walnut leaves in the aqueous extract. The structural, morphological, and colloidal properties of the as-synthesized nanoparticles have been confirmed by various methods. According to the obtained results, the morphology of the synthesized CuO/Per-NPs was spherical with sizes ranging from about 13 to 24 nm. Besides, the effects of Per-NPs and CuO/Per-NPs on unicellular algae H. pluvialis were studied. The changes in the amount of chlorophyll a, chlorophyll b, and Carotenoids in the presence of different concentrations of Per-NPs (25, 50, 100 mg/L) were more than CuO/Per-NPs. Also, decreased growth rate and efficiency of photosystem II confirmed the toxic effects of Per-NPs. However, the toxicity of CuO/Per-NPs appears to be lower than that of Per-NPs, which can be due to the changes in the surface and cationic charge of modified nanoperlit. These changes lead to a decrease in the interaction of nanoparticles with H. pluvilalis and a reduction in ROS production. Finally, the results of GC-MS used to evaluate volatile compounds, indicated an increase in the number of phenolic compounds in comparison to the control samples in 25, 50, and 100 mg/L treatments of nano-perlite.

Zebrafish as a Model for Anticancer Nanomedicine Studies

Nanomedicine is a new approach to fight against cancer by the development of anticancer nanoparticles (NPs) that are of high sensitivity, specificity, and targeting ability to detect cancer cells, such as the ability of Silica NPs in targeting epithelial cancer cells. However, these anticancer NPs require preclinical testing, and zebrafish is a useful animal model for preclinical studies of anticancer NPs. This model affords a large sample size, optical imaging, and easy genetic manipulation that aid in nanomedicine studies. This review summarizes the numerous advantages of the zebrafish animal model for such investigation, various techniques for inducing cancer in zebrafish, and discusses the methods to assess cancer development in the model and to test for the toxicity of the anticancer drugs and NPs. In addition, it summarizes the recent studies that used zebrafish as a model to test the efficacy of several different anticancer NPs in treating cancer.

Toxicological Aspects of Carbon Nanotubes, Fullerenes and Graphenes

Nanomedicines exhibit unbelievable capability in overcoming the hurdles faced in biological applications. Carbon nanotubes (CNTs), graphene-family nanomaterials and fullerenes are a class of engineered nanoparticles that have emerged as a new option for possible use in drug/gene delivery for life-threatening diseases. Their adaptability to pharmaceutical applications has opened new vistas for biomedical applications. Successful applications of this family of engineered nanoparticles in various fields may not support their use in medicine due to inconsistent data on toxicity as well as the lack of a centralized toxicity database. Inconsistent toxicological studies and lack of mechanistic understanding have been the reasons for limited understanding of their toxicological aspects. These nanoparticles, when underivatized or pristine, are considered as safe, however less reactive. The derivatized forms or functionalization changes their chemistry significantly to modify their biological effects including toxicity. They can cause acute and long term injuries in tissues by penetration through the the blood-air barrier, blood-alveolus barrier, blood-brain barrier, and blood-placenta barrier. and by accumulating in the lung, liver, and spleen . The toxicological effects are manifested through inflammatory response, DNA damage, apoptosis, autophagy and necrosis. Other factors that largely influence the toxicity of carbon nanotubes, graphenes and fullerenes are the concentration, functionalization, dimensional and surface topographical factors. Thus, a better understanding of the toxicity profile of CNTs, graphene-family nanomaterials and fullerenes in humans, animals and the environment is of significant importance, to improve their biological safety, to facilitate their wide biological application and for the successful commercial application. The exploration of appropriate cell lines to investigate specific receptors and intracellular targets as well as chronic toxicity beyond the proof-of-concept is required.

Remote control of magnetic nanocomplexes for delivery and destruction of cancer cells

Although nanotechnology advances have been exploited for a myriad of purposes, including cancer diagnostics and treatment, still there is little discussion about the mechanisms of remote control. Our main aim here is to explain the possibility of a magnetic field control over magnetic nanocomplexes to improve their delivery, controlled release and antitumor activity. In doing so we considered the nonlinear dynamics of magnetomechanical and magnetochemical effects based on free radical mechanisms in cancer development for future pre-clinical studies.

Newly Emerging Airborne Pollutants: Current Knowledge of Health Impact of Micro and Nanoplastics

Plastics are ubiquitous persistent pollutants, forming the most representative material of the Anthropocene. In the environment, they undergo wear and tear (i.e., mechanical fragmentation, and slow photo and thermo-oxidative degradation) forming secondary microplastics (MPs). Further fragmentation of primary and secondary MPs results in nanoplastics (NPs). To assess potential health damage due to human exposure to airborne MPs and NPs, we summarize the evidence collected to date that, however, has almost completely focused on monitoring and the effects of airborne MPs. Only in vivo and in vitro studies have assessed the toxicity of NPs, and a standardized method for their analysis in environmental matrices is still missing. The main sources of indoor and outdoor exposure to these pollutants include synthetic textile fibers, rubber tires, upholstery and household furniture, and landfills. Although both MPs and NPs can reach the alveolar surface, the latter can pass into the bloodstream, overcoming the pulmonary epithelial barrier. Despite the low reactivity, the number of surface area atoms per unit mass is high in MPs and NPs, greatly enhancing the surface area for chemical reactions with bodily fluids and tissue in direct contact. This is proven in polyvinyl chloride (PVC) and flock workers, who are prone to persistent inflammatory stimulation, leading to pulmonary fibrosis or even carcinogenesis.

Targeted Delivery of Erythropoietin Hybridized with Magnetic Nanocarriers for the Treatment of Central Nervous System Injury: A Literature Review

Although the incidence of central nervous system injuries has continued to rise, no promising treatments have been elucidated. Erythropoietin plays an important role in neuroprotection and neuroregeneration as well as in erythropoiesis. Moreover, the current worldwide use of erythropoietin in the treatment of hematologic diseases allows for its ready application in patients with central nervous system injuries. However, erythropoietin has a very short therapeutic time window (within 6–8 hours) after injury, and it has both hematopoietic and nonhematopoietic receptors, which exhibit heterogenic and phylogenetic differences. These differences lead to limited amounts of erythropoietin binding to in situ erythropoietin receptors. The lack of high-quality evidence for clinical use and the promising results of in vitro/in vivo models necessitate fast targeted delivery agents such as nanocarriers. Among current nanocarriers, noncovalent polymer-entrapping or polymer-adsorbing erythropoietin obtained by nanospray drying may be the most promising. With the incorporation of magnetic nanocarriers into an erythropoietin polymer, spatiotemporal external magnetic navigation is another area of great interest for targeted delivery within the therapeutic time window. Intravenous administration is the most readily used route. Manufactured erythropoietin nanocarriers should be clearly characterized using bioengineering analyses of the in vivo size distribution and the quality of entrapment or adsorption. Further preclinical trials are required to increase the therapeutic bioavailability (in vivo biological identity alteration, passage through the lung capillaries or the blood brain barrier, and timely degradation followed by removal of the nanocarriers from the body) and decrease the adverse effects (hematological complications, neurotoxicity, and cytotoxicity), especially of the nanocarrier.

Oral Exposure to ZnO Nanoparticles Disrupt the Structure of Bone in Young Rats via the OPG/RANK/RANKL/IGF-1 Pathway

Purpose

To evaluate the effects of ZnO NPs on bone growth in rats and explore the possible mechanisms of action.

Materials and Methods

Three-week-old male rats received ultrapure water or 68, 203, and 610 mg/kg zinc oxide nanoparticles (ZnO NPs) for 28 days, orally.

Results

The high-dosage groups caused significant differences in weight growth rate, body length, and tibia length (P<0.05), all decreasing with increased ZnO NP dosage. There were no significant differences in body mass index (BMI) (P>0.05). The zinc concentration in liver and bone tissue increased significantly with increased ZnO NP dosage (P<0.05). Clearly increased aspartate aminotransferase (AST) and alanine aminotransferase (ALT) levels were observed in the 610 mg/kg ZnO NP group (P>0.05), whereas alkaline phosphatase (ALP) increased in the 610 mg/kg ZnO NP group (P<0.05). Significant differences in insulin-like growth factor type 1 (IGF-1) levels and a decrease in calcium (Ca) levels were observed in 203 and 610 mg/kg ZnO NP groups (P<0.05). Phosphorus (P) levels increased and the Ca/P ratio decreased in the 610 mg/kg ZnO NP group (P<0.05). Micro-computed tomography (micro-CT) of the tibia demonstrated signs of osteoporosis, such as decreased bone density, little trabecular bone structure and reduced cortical bone thickness. Micro-CT data further demonstrated significantly decreased bone mineral density (BMD), trabecular number (Tb.N), and relative bone volume (BV/TV) with increasing dosage of ZnO NPs. Osteoprotegerin (OPG) expression and the ratio of OPG to receptor activator of nuclear factor-κB ligand (RANKL) were statistically lower in the 610 mg/kg ZnO NP group (P<0.05), whereas RANKL expression did not change significantly (P>0.05).

Conclusion

We infer that ZnO NPs affect bone growth in young rats directly or indirectly by altering IGF-1 levels. Overall, the results indicate that ZnO NPs promote osteoclast activity and increase bone loss through the OPG/RANK/RANKL/IGF-1 pathway.

Cell-biological effects of zinc oxide spheres and rods from the nano- to the microscale at sub-toxic levels

Zinc oxide particles were synthesized in various sizes and shapes, i.e., spheres of 40-nm, 200-nm, and 500-nm diameter and rods of 40∙100 nm² and 100∙400 nm² (all PVP-stabilized and well dispersed in water and cell culture medium). Crystallographically, the particles consisted of the hexagonal wurtzite phase with a primary crystallite size of 20 to 100 nm. The particles showed a slow dissolution in water and cell culture medium (both neutral; about 10% after 5 days) but dissolved within about 1 h in two different simulated lysosomal media (pH 4.5 to 4.8). Cells relevant for respiratory exposure (NR8383 rat alveolar macrophages) were exposed to these particles in vitro. Viability, apoptosis, and cell activation (generation of reactive oxygen species, ROS, release of cytokines) were investigated in an in vitro lung cell model with respect to the migration of inflammatory cells. All particle types were rapidly taken up by the cells, leading to an increased intracellular zinc ion concentration. The nanoparticles were more cytotoxic than the microparticles and comparable with dissolved zinc acetate. All particles induced cell apoptosis, unlike dissolved zinc acetate, indicating a particle-related mechanism. Microparticles induced a stronger formation of reactive oxygen species than smaller particles probably due to higher sedimentation (cell-to-particle contact) of microparticles in contrast to nanoparticles. The effect of particle types on the cytokine release was weak and mainly resulted in a decrease as shown by a protein microarray. In the particle-induced cell migration assay (PICMA), all particles had a lower effect than dissolved zinc acetate. In conclusion, the biological effects of zinc oxide particles in the sub-toxic range are caused by zinc ions after intracellular dissolution, by cell-to-particle contacts, and by the uptake of zinc oxide particles into cells.

Application of the adverse outcome pathway framework for investigating skin sensitization potential of nanomaterials using new approach methods

BACKGROUND

Currently, considerable efforts to standardize methods for accurate assessment of properties and safety aspects of nanomaterials are being made. However, immunomodulation effects upon skin exposure to nanomaterial have not been explored.

OBJECTIVES

To investigate the immunotoxicity of single-wall carbon nanotubes, titanium dioxide, and fullerene using the current mechanistic understanding of skin sensitization by applying the concept of adverse outcome pathway (AOP).

METHODS

Investigation of the ability of nanomaterials to interact with skin proteins using the micro-direct peptide reactivity assay; the expression of CD86 cell surface marker using the U937 cell activation test (OECD No. 442E/2018); and the effects of nanomaterials on modulating inflammatory response through inflammatory cytokine release by U937 cells.

RESULTS

The nanomaterials easily internalized into keratinocytes cells, interacted with skin proteins, and triggered activation of U937 cells by increasing CD86 expression and modulating inflammatory cytokine production. Consequently, these nanomaterials were classified as skin sensitizers in vitro.

CONCLUSIONS

Our study suggests the potential immunotoxicity of nanomaterials and highlights the importance of studying the immunotoxicity and skin sensitization potential of nanomaterials to anticipate possible human health risks using standardized mechanistic nonanimal methods with high predictive accuracy. Therefore, it contributes toward the applicability of existing OECD (Organisation for Economic Co-operation and Development) testing guidelines for accurate assessment of nanomaterial skin sensitization potential.

Toxicological profile of lipid-based nanostructures: are they considered as completely safe nanocarriers?

Nanoparticles are ubiquitous in the environment and are widely used in medical science (e.g. bioimaging, diagnosis, and drug therapy delivery). Due to unique physicochemical properties, they are able to cross many barriers, which is not possible for traditional drugs. Nevertheless, exposure to NPs and their following interactions with organelles and macromolecules can result in negative effects on cells, especially, they can induce cytotoxicity, epigenicity, genotoxicity, and cell death. Lipid-based nanomaterials (LNPs) are one of the most important achievements in drug delivery mainly due to their superior physicochemical and biological characteristics, particularly its safety. Although they are considered as the completely safe nanocarriers in biomedicine, the lipid composition, the surfactant, emulsifier, and stabilizer used in the LNP preparation, and surface electrical charge are important factors that might influence the toxicity of LNPs. According to the author's opinion, their toxicity profile should be evaluated case-by-case regarding the intended applications. Since there is a lack of all-inclusive review on the various aspects of LNPs with an emphasis on toxicological profiles including cyto-genotoxiciy, this comprehensive and critical review is outlined.

Pollution, Particles, and Dementia: A Hypothetical Causative Pathway

Epidemiological studies of air pollution have shown associations between exposure to particles and dementia. The mechanism of this is unclear. As these seem unlikely in terms of the very small dose likely to reach the brain in usual Western urban circumstances, we extend our 1995 hypothetical explanation of the association of air pollution with cardiac deaths as a plausible alternative explanation of its associations with dementia. Since our original proposal, it has become apparent that inflammation may be carried by blood from organ to organ by biologic microparticles derived from cell membranes. These transmit inflammatory messages to endothelial cells throughout the body as part of a general defensive response to assumed bacterial infection; particulate air pollution has recently been shown to be associated with their release into the blood. We propose that episodic release of biologic microparticles from pollution-induced lung inflammation causes secondary inflammation in the blood-brain barrier and cerebral microbleeds, culminating over time in cognitive impairment. Ultimately, by incomplete repair and accumulation of amyloid, this increases the risk of Alzheimer’s disease. Importantly, this mechanism may also explain the relationships of other inflammatory conditions and environmental factors with cognitive decline, and point to new opportunities to understand and prevent dementia.

Recent advances in physiologically based pharmacokinetic and pharmacodynamic models for anticancer nanomedicines

Nanoparticles (NPs) have distinct pharmacokinetic (PK) properties and can potentially improve the absorption, distribution, metabolism, and elimination (ADME) of small-molecule drugs loaded therein. Owing to the unwanted toxicities of anticancer agents in healthy organs and tissues, their precise delivery to the tumor is an essential requirement. There have been numerous advancements in the development of nanomedicines for cancer therapy. Physiologically based PK (PBPK) models serve as excellent tools for describing and predicting the ADME properties and the efficacy and toxicity of drugs, in combination with pharmacodynamic (PD) models. The recent preliminary application of these modeling approaches to NPs demonstrated their potential benefits in research and development processes relevant to the ADME and pharmacodynamics of NPs and nanomedicines. Here, we comprehensively review the pharmacokinetics of NPs, the developed PBPK models for anticancer NPs, and the developed PD model for anticancer agents.

Elemental Composition of PM2.5 Aerosol in a Residential-Industrial Area of a Mediterranean Megacity

Very little is known about the elemental composition and possible sources of fine aerosol particles from Mediterranean megacities. Fine aerosol particles were collected at a residential-industrial area in Greater Cairo, Egypt, during the period from October 2010 to May 2011. The elemental compositions of the collected samples were quantified by using a homemade energy dispersive x-ray fluorescence spectrometer, whereas black carbon was quantified by a black smoke detector. Fifteen elements have been quantified. Of these constituents, Ca, C, Cl, S, and Fe had the highest concentrations: greater than 1 µg m^-3. The overall mean mass concentration of the collected samples equals 70 µg m^-3; this value exceeds the European Union annual Air Quality Standard levels. The individual elemental concentrations of the fine particles were found to be dominated by elements linked to mineral dust. Most of the monthly variations of elemental concentrations can be attributed to seasonal meteorological conditions. Other possible sources were vehicle-exhaust and industrial activities. The results pinpoint the problem of identifying different sources when one source, in this case, the nearby deserts, is dominant. The results from this study contribute to the growing knowledge of concentrations, composition, and possible sources of ambient fine particulate matter.

Molecular and Cellular Risk Assessment of Healthy Human Cells and Cancer Human Cells Exposed to Nanoparticles

Nanodrugs have in recent years been a subject of great debate. In 2017 alone, almost 50 nanodrugs were approved for clinical use worldwide. Despite the advantages related to nanodrugs/nanomedicine, there is still a lack of information regarding the biological safety, as the real behavior of these nanodrugs in the body. In order to better understand these aspects, in this study, we evaluated the effect of polylactic acid (PLA) nanoparticles (NPs) and magnetic core mesoporous silica nanoparticles (MMSN), of 1000 nm and 50 nm, respectively, on human cells. In this direction we evaluated the cell cycle, cytochemistry, proliferation and tubulogenesis on tumor cells lines: from melanoma (MV3), breast cancer (MCF-7, MDA-MB-213), glioma (U373MG), prostate (PC3), gastric (AGS) and colon adenocarcinoma (HT-29) and non-tumor cell lines: from human melanocyte (NGM), fibroblast (FGH) and endothelial (HUVEC), respectively. The data showed that an acute exposure to both, polymeric nanoparticles or MMSN, did not show any relevant toxic effects on neither tumor cells nor non-tumor cells, suggesting that although nanodrugs may present unrevealed aspects, under acute exposition to human cells they are harmless.

Immobilization and Function of nIR-Fluorescent Carbon Nanotube Sensors on Paper Substrates for Fluidic Manipulation

Nanoparticle-based optical sensors are capable of highly sensitive and selective chemical interactions and can form the basis of molecular recognition for various classes of analytes. However, their incorporation into standardized in vitro assays has been limited by their incompatibility with packaging or form factors necessary for specific applications. Here, we have developed a technique for immobilizing nIR-fluorescent single-walled carbon nanotube (SWCNT) sensors on seven different types of paper substrates including nitrocellulose, nylon, poly(vinylidene fluoride), and cellulose. Sensors remain functional upon immobilization and exhibit nIR fluorescence in nonaqueous solvent systems. We then extend this system to the Corona Phase Molecular Recognition (CoPhMoRe) approach of synthetic molecular recognition by screening ssDNA-wrapped SWCNTs with different sequences against a panel of fat-soluble vitamins in canola oil, identifying a sensor which responds to β-carotene with a dissociation constant of 2.2 μM. Moreover, we pattern hydrophobic regions onto nitrocellulose using the wax printing method and form one-dimensional sensor barcodes for rapid multiplexing. Using a sensor array of select ssDNA wrappings, we are able to distinguish between Cu(II), Cd(II), Hg(II), and Pb(II) at a concentration of 100 μM. Finally, we demonstrate that immobilized sensors remain fluorescent and responsive for nearly 60 days when stability is addressed. This work represents a significant step toward the deployment of fluorescent nanoparticle sensors for point-of-use applications.

PM1 in Ambient and Indoor Air—Urban and Rural Areas in the Upper Silesian Region, Poland

(1) Background: The work presents results of concentration measurements of PM1, collected in the indoor air of four preschool buildings in Gliwice and its environs (Silesia Province) and in ambient air in the vicinity of four working hard coal power plants and four coking plants located in southern Poland. (2) Methods: The samples of <1 µm, 1–2.5 µm, 2.5–10 µm, and >10 µm fractions were collected with the use of Dekati® PM10 cascade impactor, and concentrations of seven trace elements (Cd, Cr, Mn, Ni, Pb, Sb, and Se) were determined. (3) Results: The concentrations of PM1 changed in the range of 3.1 μg/m3–65.3 μg/m3. Among trace elements, the highest concentrations in indoor air were evidenced for Cr (129–219 ng/m3), while in outdoor air for Pb (12.6–21.2 ng/m3). Principal Component Analysis PCA analysis extracted three factors of rural dusts, city dusts, and natural soils. (4) Conclusions: The paper points to accumulation of carcinogenic Cd, Cr, and Ni in indoor air, and significant contribution of trace elements in PM1, which, owing to long-lasting exposure and elevated sensitivity of developing organisms, may evoke effects on health of children.

Carbon nanotubes: Evaluation of toxicity at biointerfaces

Carbon nanotubes (CNTs) are a class of carbon allotropes with interesting properties that make them productive materials for usage in various disciplines of nanotechnology such as in electronics equipments, optics and therapeutics. They exhibit distinguished properties viz., strength, and high electrical and heat conductivity. Their uniqueness can be attributed due to the bonding pattern present between the atoms which are very strong and also exhibit high extreme aspect ratios. CNTs are classified as single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) on the basis of number of sidewalls present and the way they are arranged spatially. Application of CNTs to improve the performance of many products, especially in healthcare, has led to an occupational and public exposure to these nanomaterials. Hence, it becomes a major concern to analyze the issues pertaining to the toxicity of CNTs and find the best suitable ways to counter those challenges. This review summarizes the toxicity issues of CNTs in vitro and in vivo in different organ systems (bio interphases) of the body that result in cellular toxicity.

One-step synthesis of magnetic-TiO2-nanocomposites with high iron oxide-composing ratio for photocatalysis of rhodamine 6G

In the study, a facile one-step method for synthesizing magnetic-TiO₂-nanophotocatalysts was developed. With the same composing ratio of 0.5 and 0.35 (Fe:Ti, mole:mole), we prepared two types of magnetic-TiO₂-nanocomposites as one-step synthesized Fe_xO_y-composed TiO₂ (Fe_xO_y/TiO₂-0.5 and Fe_xO_y/TiO₂-0.35) and two-step synthesized core-shell Fe_xO_y@TiO₂ (Fe_xO_y@TiO₂-0.5 and Fe_xO_y@TiO₂-0.35), and tested their performance in rhodamine 6G (R6G) photodegradation. X-ray diffraction (XRD) analysis showed that Fe_xO_y@TiO₂-0.5 has the smallest crystallite size (16.8 nm), followed by Fe_xO_y@TiO₂-0.5 (18.4 nm), Fe_xO_y/TiO₂-0.35 (21.0 nm) and Fe_xO_y/TiO₂-0.5 (19.0 nm), and X-ray photoelectron spectroscopy (XPS) suggested the decreasing percentage of Fe₃O₄ from 52.1% to 36.7%-47.2% after Ti-deposition treatment. The saturated magnetisms followed the order: Fe_xO_y@TiO₂-0.5 > Fe_xO_y@TiO₂-0.35 > Fe_xO_y/TiO₂-0.5 > Fe_xO_y/TiO₂-0.35. R6G photodegradation followed the first order kinetics and was slightly influenced by pH but significantly affected by initial photocatalyst concentration. Fe_xO_y/TiO₂-0.35 achieved the highest removal efficiency for R6G (92.5%), followed by Fe_xO_y@TiO₂-0.35 (88.97%), Fe_xO_y@TiO₂-0.5 (60.49%) and Fe_xO_y/TiO₂-0.5 (48.06%). Additionally, all these magnetic-TiO₂-nanocomposites had satisfied magnetic recoverability and exhibited laudable reusability after 5-times reuse, even achieving higher R6G removal efficiencies from 97.30% to 98.47%. Our one-step method took only 75 min for nanocomposite synthesis, 90 min less than conventional two-step method, showing its feasibility as a practical method for magnetic-TiO₂-nanocomposite synthesis in industrial application.

Multiscale Molecular Dynamics Simulation of Multiple Protein Adsorption on Gold Nanoparticles

A multiscale molecular dynamics simulation study has been carried out in order to provide in-depth information on the adsorption of hemoglobin, myoglobin, and trypsin over citrate-capped AuNPs of 15 nm diameter. In particular, determinants for single proteins adsorption and simultaneous adsorption of the three types of proteins considered have been studied by Coarse-Grained and Meso-Scale molecular simulations, respectively. The results, discussed in the light of the controversial experimental data reported in the current experimental literature, have provided a detailed description of the (i) recognition process, (ii) number of proteins involved in the early stages of corona formation, (iii) protein competition for AuNP adsorption, (iv) interaction modalities between AuNP and protein binding sites, and (v) protein structural preservation and alteration.

An Alternative In Vitro Method for Examining Nanoparticle-Induced Cytotoxicity

Conventional in vitro assays are often used as initial screens to identify potential toxic effects of nanoparticles (NPs). However, many NPs have shown interference with conventional in vitro assays, resulting in either false-positive or -negative outcomes. Here, we report an alternative method for the in vitro assessment of NP-induced cytotoxicity utilizing Fluoro-Jade C (FJ-C). To provide proof of concept and initial validation data, Ag-NPs and Au-NPs were tested in 3 different cell cultures including rat brain microvessel endothelial cells, mouse neural stem cells, and the human SH-SY5Y cell line. Conventional 2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide (XTT) and lactate dehydrogenase (LDH) assays were run in parallel with the new method and served as references. The results demonstrate for the first time that FJ-C labeling can be a useful tool for assessing NP-induced cytotoxicity in vitro. Using these approaches, it was also demonstrated that removal of Ag-NPs-while keeping the Ag-ions that were released from the Ag-NPs in culture media-abolished the measured cytotoxicity, indicating that Ag-NPs rather than Ag-ions in solution contributed to the observed cytotoxic effects. Further, co-treatment of Ag-NPs with N-acetyl cysteine (NAC) prevented the observed cytotoxicity, suggesting a protective role of NAC in Ag-NP-induced cytotoxicity. Thus, this alternative in vitro assay is well suited for identify potential cytotoxicity associated with exposure to NPs.

Cationic and anionic unloaded polymeric nanocapsules: Toxicological evaluation in rats shows low toxicity

The experimental design aiming at evaluating the performance of drugs nanoencapsulated involves inclusion of a formulation without drug (unloaded). This formulation has sometimes presented per se effect. In this sense, we sought to evaluate the toxicity of unloaded polymeric nanocapsules (NCs) with different surfaces (cationic and anionic) in male Wistar rats in male Wistar rats. The physicochemical characterization of NCs with different surfaces: polysorbate 80 (P80), polyethylene glycol (PEG), eudragit ®RS 100 (EUD) and chitosan (CS) was performed. Rats were treated with unloaded NCs (P80, PEG, EUD and CS surfaces) daily for 14 days per oral route. 24 h of last treatment, animals were euthanized and organs were removed and weighted. After, biochemical determinations were performed. In general, NCs-surfaces did not cause alterations in body weight, weight of organs and histopathological analysis. PEG-surface NCs did not generate hepatotoxicity. In investigation of lipid profile, the surface with P80 changed TC and HDL-C levels. Besides that, all NCs did not alter oxidative stress markers in organs studied (TBARS and Reactive Species) and CS-surface presented antioxidant activity in kidney. This study demonstrated that NCs-surfaces depending on their physicochemical characteristics had low or no toxicity.

Is smaller worse? New insights about associations of PM1 and respiratory health in children and adolescents

BACKGROUND AND OBJECTIVES

Little is known about PM₁ effects on respiratory health, relative to larger size fractions (PM_2.5). To address this literature gap, we assessed associations between PM₁ exposure and asthmatic symptoms in Chinese children and adolescents, compared with PM_2.5.

METHODS

A total of 59,754 children, aged 2-17 years, were recruited from 94 kindergartens, elementary and middle schools in the Seven Northeast Cities (SNEC) study, during 2012-2013. We obtained information on asthma and asthma-related symptoms including wheeze, persistent phlegm, and persistent cough using a standardized questionnaire developed by the American Thoracic Society. PM₁ and PM_2.5 concentrations were estimated using a spatial statistical model matched to the children's geocoded home addresses. To examine the associations, mixed models with school/kindergarten as random intercept were used, controlling for covariates.

RESULTS

Odds ratios (ORs) of doctor-diagnosed asthma associated with a 10-μg/m³ increase for PM₁ and PM_2.5 were 1.56 (95% CI: 1.46-1.66) and 1.50 (1.41-1.59), respectively, and similar pattern were observed for other outcomes. Interaction analyses indicated that boys and the individuals with an allergic predisposition may be vulnerable subgroups. For example, among children with allergic predisposition, the ORs for doctor diagnosed asthma per 10 μg/m³ increase in PM₁ was 1.71 (95% CI: 1.60-1.83), which was stronger than in their counterparts (1.46; 1.37-1.56) (p_{for interaction} < 0.05).

CONCLUSIONS

This study indicated that long-term exposure to PM₁ may increase the risk of asthma and asthma-related symptoms, especially among boys and those with allergic predisposition. Furthermore, these positive associations for PM₁ were very similar to those for PM_2.5.

Comparative biological effects of spherical noble metal nanoparticles (Rh, Pd, Ag, Pt, Au) with 4-8 nm diameter

For a comparative cytotoxicity study, nanoparticles of the noble metals Rh, Pd, Ag, Pt, and Au (spherical, average diameter 4 to 8 nm) were prepared by reduction in water and colloidally stabilized with poly(N-vinyl pyrrolidone) (PVP). Thus, their shape, size, and surface functionalization were all the same. Size and morphology of the nanoparticles were determined by dynamic light scattering (DLS), analytical disc centrifugation (differential centrifugal sedimentation, DCS), and high-resolution transmission electron microscopy (HRTEM). Cell-biological experiments were performed to determine the effect of particle exposure on the viability of human mesenchymal stem cells (hMSCs). Except for silver, no adverse effect of any of the metal nanoparticles was observed for concentrations up to 50 ppm (50 mg L-1) incubated for 24 h, indicating that noble metal nanoparticles (rhodium, palladium, platinum, gold) that do not release ions are not cytotoxic under these conditions.