Subcellular localization of Clostridium thermocellum ORF3p, a protein carrying a receptor for the docking sequence borne by the catalytic components of the cellulosome

Binding of GTP to BifA is required for the production of Pel-dependent biofilms in Pseudomonas aeruginosa

The Pel exopolysaccharide is one of the most mechanistically conserved and phylogenetically diverse bacterial biofilm matrix determinants. Pel is a major contributor to the structural integrity of Pseudomonas aeruginosa biofilms, and its biosynthesis is regulated by the binding of cyclic-3',5'-dimeric guanosine monophosphate (c-di-GMP) to the PelD receptor. c-di-GMP is synthesized from two molecules of guanosine triphosphate (GTP) by diguanylate cyclases with GGDEF domains and degraded by phosphodiesterases with EAL or HD-GYP domains. As the P. aeruginosa genome encodes 43 c-di-GMP metabolic enzymes, one way signaling specificity can be achieved is through direct interaction between specific enzyme-receptor pairs. Here, we show that the inner membrane hybrid GGDEF-EAL enzyme, BifA, directly interacts with PelD via its cytoplasmic HAMP, GGDEF, and EAL domains. Despite having no catalytic function, the degenerate active site motif of the BifA GGDEF domain (GGDQF) has retained the ability to bind GTP with micromolar affinity. Mutations that abolish GTP binding result in increased biofilm formation but stable global c-di-GMP levels. Our data suggest that BifA forms a dimer in solution and that GTP binding induces conformational changes in dimeric BifA that enhance the BifA-PelD interaction and stimulate its phosphodiesterase activity, thus reducing c-di-GMP levels and downregulating Pel biosynthesis. Structural comparisons between the dimeric AlphaFold2 model of BifA and the structures of other hybrid GGDEF-EAL proteins suggest that the regulation of BifA by GTP may occur through a novel mechanism.IMPORTANCEc-di-GMP is the most common cyclic dinucleotide used by bacteria to regulate phenotypes such as motility, biofilm formation, virulence factor production, cell cycle progression, and cell differentiation. While the identification and initial characterization of c-di-GMP metabolic enzymes are well established, our understanding of how these enzymes are regulated to provide signaling specificity remains understudied. Here we demonstrate that the inactive GGDEF domain of BifA binds GTP and regulates the adjacent phosphodiesterase EAL domain, ultimately downregulating Pel-dependent P. aeruginosa biofilm formation through an interaction with PelD. This discovery adds to the growing body of literature regarding how hybrid GGDEF-EAL enzymes are regulated and provides additional precedence for studying how direct interactions between c-di-GMP metabolic enzymes and effectors result in signaling specificity.

Pseudomonas aeruginosa AlgF is a protein-protein interaction mediator required for acetylation of the alginate exopolysaccharide

Enzymatic modifications of bacterial exopolysaccharides enhance immune evasion and persistence during infection. In the Gram-negative opportunistic pathogen Pseudomonas aeruginosa, acetylation of alginate reduces opsonic killing by phagocytes and improves reactive oxygen species scavenging. Although it is well known that alginate acetylation in P. aeruginosa requires AlgI, AlgJ, AlgF, and AlgX, how these proteins coordinate polymer modification at a molecular level remains unclear. Here, we describe the structural characterization of AlgF and its protein interaction network. We characterize direct interactions between AlgF and both AlgJ and AlgX in vitro and demonstrate an association between AlgF and AlgX, as well as AlgJ and AlgI, in P. aeruginosa. We determine that AlgF does not exhibit acetylesterase activity and is unable to bind to polymannuronate in vitro. Therefore, we propose that AlgF functions to mediate protein-protein interactions between alginate acetylation enzymes, forming the periplasmic AlgJFXK (AlgJ-AlgF-AlgX-AlgK) acetylation and export complex required for robust biofilm formation.

An atypical lipoteichoic acid from Clostridium perfringens elicits a broadly cross-reactive and protective immune response

Clostridium perfringens is a leading cause of food-poisoning and causes avian necrotic enteritis, posing a significant problem to both the poultry industry and human health. No effective vaccine against C. perfringens is currently available. Using an antiserum screen of mutants generated from a C. perfringens transposon-mutant library, here we identified an immunoreactive antigen that was lost in a putative glycosyltransferase mutant, suggesting that this antigen is likely a glycoconjugate. Following injection of formalin-fixed whole cells of C. perfringens HN13 (a laboratory strain) and JGS4143 (chicken isolate) intramuscularly into chickens, the HN13-derived antiserum was cross-reactive in immunoblots with all tested 32 field isolates, whereas only 5 of 32 isolates were recognized by JGS4143-derived antiserum. The immunoreactive antigens from both HN13 and JGS4143 were isolated, and structural analysis by MALDI-TOF-MS, GC-MS, and 2D NMR revealed that both were atypical lipoteichoic acids (LTAs) with poly-(β1→4)-ManNAc backbones substituted with phosphoethanolamine. However, although the ManNAc residues in JGS4143 LTA were phosphoethanolamine-modified, a few of these residues were instead modified with phosphoglycerol in the HN13 LTA. The JGS4143 LTA also had a terminal ribose and ManNAc instead of ManN in the core region, suggesting that these differences may contribute to the broadly cross-reactive response elicited by HN13. In a passive-protection chicken experiment, oral challenge with C. perfringens JGS4143 lead to 22% survival, whereas co-gavage with JGS4143 and α-HN13 antiserum resulted in 89% survival. This serum also induced bacterial killing in opsonophagocytosis assays, suggesting that HN13 LTA is an attractive target for future vaccine-development studies.

Pel Polysaccharide Biosynthesis Requires an Inner Membrane Complex Comprised of PelD, PelE, PelF, and PelG

The Pel polysaccharide is a structural component of the extracellular matrix of Pseudomonas aeruginosa biofilms. Recent analyses suggest that Pel production proceeds via a synthase-dependent polysaccharide secretion pathway, which in Gram-negative bacteria is defined by an outer membrane β-barrel porin, a periplasmic tetratricopeptide repeat-containing scaffold protein, and an inner membrane-embedded synthase. Polymerization is catalyzed by the glycosyltransferase domain of the synthase component of these systems, which is allosterically regulated by cyclic 3',5'-dimeric GMP (c-di-GMP). However, while the outer membrane and periplasmic components of the Pel system have been characterized, the inner membrane complex required for Pel polymerization has yet to be defined. To address this, we examined over 500 pel gene clusters from diverse species of Proteobacteria This analysis identified an invariant set of four syntenic genes, three of which, pelD, pelE, and pelG, are predicted to reside within the inner membrane, while the fourth, pelF, encodes a glycosyltransferase domain. Using a combination of gene deletion analysis, subcellular fractionation, coimmunoprecipitation, and bacterial two-hybrid assays, we provide evidence for the existence of an inner membrane complex of PelD, PelE, and PelG. Furthermore, we show that this complex interacts with PelF in order to facilitate its localization to the inner membrane. Mutations that abolish c-di-GMP binding to the known receptor domain of PelD had no effect on complex formation, suggesting that c-di-GMP binding stimulates Pel production through quaternary structural rearrangements. Together, these data provide the first experimental evidence of an inner membrane complex involved in Pel polysaccharide production.IMPORTANCE The exopolysaccharide Pel plays an important role in bacterial cell-cell interactions, surface adhesion, and protection against certain antibiotics. We identified invariant pelDEFG gene clusters in over 500 diverse proteobacterial species. Using Pseudomonas aeruginosa, we demonstrate that PelD, PelE, PelF, and PelG form a complex at the inner membrane and propose that this complex represents the previously unidentified Pel polysaccharide synthase, which is responsible for Pel polymerization and transport across the cytoplasmic membrane. We show that the formation of this complex is independent of cyclic 3',5'-dimeric GMP (c-di-GMP) binding to the receptor PelD. Collectively, these data establish the widespread Pel apparatus as a member of the synthase-dependent pathway of polysaccharide biosynthetic systems and broaden the architectural diversity of already-established bacterial polysaccharide synthases.

Colocalization and Disposition of Cellulosomes in Clostridium clariflavum as Revealed by Correlative Superresolution Imaging

Cellulosomes are multienzyme complexes produced by anaerobic, cellulolytic bacteria for highly efficient breakdown of plant cell wall polysaccharides. Clostridium clariflavum is an anaerobic, thermophilic bacterium that produces the largest assembled cellulosome complex in nature to date, comprising three types of scaffoldins: a primary scaffoldin, ScaA; an adaptor scaffoldin, ScaB; and a cell surface anchoring scaffoldin, ScaC. This complex can contain 160 polysaccharide-degrading enzymes. In previous studies, we proposed potential types of cellulosome assemblies in C. clariflavum and demonstrated that these complexes are released into the extracellular medium. In the present study, we explored the disposition of the highly structured, four-tiered cell-anchored cellulosome complex of this bacterium. Four separate, integral cellulosome components were subjected to immunolabeling: ScaA, ScaB, ScaC, and the cellulosome’s most prominent enzyme, GH48. Imaging of the cells by correlating scanning electron microscopy and three-dimensional (3D) superresolution fluorescence microscopy revealed that some of the protuberance-like structures on the cell surface represent cellulosomes and that the components are highly colocalized and organized by a defined hierarchy on the cell surface. The display of the cellulosome on the cell surface was found to differ between cells grown on soluble or insoluble substrates. Cell growth on microcrystalline cellulose and wheat straw exhibited dramatic enhancement in the amount of cellulosomes displayed on the bacterial cell surface.

Conversion of plant biomass into soluble sugars is of high interest for production of fermentable industrial materials, such as biofuels. Biofuels are a very attractive alternative to fossil fuels, both for recycling of agricultural wastes and as a source of sustainable energy. Cellulosomes are among the most efficient enzymatic degraders of biomass known to date, due to the incorporation of a multiplicity of enzymes into a potent, multifunctional nanomachine. The intimate association with the bacterial cell surface is inherent in its efficient action on lignocellulosic substrates, although this property has not been properly addressed experimentally. The dramatic increase in cellulosome performance on recalcitrant feedstocks is critical for the design of cost-effective processes for efficient biomass degradation.

Oligomeric lipoprotein PelC guides Pel polysaccharide export across the outer membrane of Pseudomonas aeruginosa

Secreted polysaccharides are important functional and structural components of bacterial biofilms. The opportunistic pathogen Pseudomonas aeruginosa produces the cationic exopolysaccharide Pel, which protects bacteria from aminoglycoside antibiotics and contributes to biofilm architecture through ionic interactions with extracellular DNA. A bioinformatics analysis of genome databases suggests that gene clusters for Pel biosynthesis are present in >125 bacterial species, yet little is known about how this biofilm exopolysaccharide is synthesized and exported from the cell. In this work, we characterize PelC, an outer membrane lipoprotein essential for Pel production. Crystal structures of PelC from Geobacter metallireducens and Paraburkholderia phytofirmans coupled with structure-guided disulfide cross-linking in P. aeruginosa suggest that PelC assembles into a 12- subunit ring-shaped oligomer. In this arrangement, an aromatic belt in proximity to its lipidation site positions the highly electronegative surface of PelC toward the periplasm. PelC is structurally similar to the Escherichia coli amyloid exporter CsgG; however, unlike CsgG, PelC does not possess membrane-spanning segments required for polymer export across the outer membrane. We show that the multidomain protein PelB with a predicted C-terminal β-barrel porin localizes to the outer membrane, and propose that PelC functions as an electronegative funnel to guide the positively charged Pel polysaccharide toward an exit channel formed by PelB. Together, our findings provide insight into the unique molecular architecture and export mechanism of the Pel apparatus, a widespread exopolysaccharide secretion system found in environmental and pathogenic bacteria.

Characterization of the Pseudomonas aeruginosa Glycoside Hydrolase PslG Reveals That Its Levels Are Critical for Psl Polysaccharide Biosynthesis and Biofilm Formation

A key component of colonization, biofilm formation, and protection of the opportunistic human pathogen Pseudomonas aeruginosa is the biosynthesis of the exopolysaccharide Psl. Composed of a pentameric repeating unit of mannose, glucose, and rhamnose, the biosynthesis of Psl is proposed to occur via a Wzx/Wzy-dependent mechanism. Previous genetic studies have shown that the putative glycoside hydrolase PslG is essential for Psl biosynthesis. To understand the function of this protein, the apo-structure of the periplasmic domain of PslG (PslG(31-442)) and its complex with mannose were determined to 2.0 and 1.9 Å resolution, respectively. Despite a domain architecture and positioning of catalytic residues similar to those of other family 39 glycoside hydrolases, PslG(31-442) exhibits a unique 32-Å-long active site groove that is distinct from other structurally characterized family members. PslG formed a complex with two mannose monosaccharides in this groove, consistent with binding data obtained from intrinsic tryptophan fluorescence. PslG was able to catalyze the hydrolysis of surface-associated Psl, and this activity was abolished in a E165Q/E276Q double catalytic variant. Surprisingly, P. aeruginosa variants with these chromosomal mutations as well as a pslG deletion mutant were still capable of forming Psl biofilms. However, overexpression of PslG in a pslG deletion background impaired biofilm formation and resulted in less surface-associated Psl, suggesting that regulation of this enzyme is important during polysaccharide biosynthesis.

Dimeric c-di-GMP is required for post-translational regulation of alginate production in Pseudomonas aeruginosa

Pseudomonas aeruginosa is an opportunistic human pathogen that secretes the exopolysaccharide alginate during infection of the respiratory tract of individuals afflicted with cystic fibrosis and chronic obstructive pulmonary disease. Among the proteins required for alginate production, Alg44 has been identified as an inner membrane protein whose bis-(3',5')-cyclic dimeric guanosine monophosphate (c-di-GMP) binding activity post-translationally regulates alginate secretion. In this study, we report the 1.8 Å crystal structure of the cytoplasmic region of Alg44 in complex with dimeric self-intercalated c-di-GMP and characterize its dinucleotide-binding site using mutational analysis. The structure shows that the c-di-GMP binding region of Alg44 adopts a PilZ domain fold with a dimerization mode not previously observed for this family of proteins. Calorimetric binding analysis of residues in the c-di-GMP binding site demonstrate that mutation of Arg-17 and Arg-95 alters the binding stoichiometry between c-di-GMP and Alg44 from 2:1 to 1:1. Introduction of these mutant alleles on the P. aeruginosa chromosome show that the residues required for binding of dimeric c-di-GMP in vitro are also required for efficient alginate production in vivo. These results suggest that the dimeric form of c-di-GMP represents the biologically active signaling molecule needed for the secretion of an important virulence factor produced by P. aeruginosa.

S-layers: principles and applications

Monomolecular arrays of protein or glycoprotein subunits forming surface layers (S-layers) are one of the most commonly observed prokaryotic cell envelope components. S-layers are generally the most abundantly expressed proteins, have been observed in species of nearly every taxonomical group of walled bacteria, and represent an almost universal feature of archaeal envelopes. The isoporous lattices completely covering the cell surface provide organisms with various selection advantages including functioning as protective coats, molecular sieves and ion traps, as structures involved in surface recognition and cell adhesion, and as antifouling layers. S-layers are also identified to contribute to virulence when present as a structural component of pathogens. In Archaea, most of which possess S-layers as exclusive wall component, they are involved in determining cell shape and cell division. Studies on structure, chemistry, genetics, assembly, function, and evolutionary relationship of S-layers revealed considerable application potential in (nano)biotechnology, biomimetics, biomedicine, and synthetic biology.

Structural and functional characterization of Pseudomonas aeruginosa AlgX: role of AlgX in alginate acetylation

The exopolysaccharide alginate, produced by mucoid Pseudomonas aeruginosa in the lungs of cystic fibrosis patients, undergoes two different chemical modifications as it is synthesized that alter the properties of the polymer and hence the biofilm. One modification, acetylation, causes the cells in the biofilm to adhere better to lung epithelium, form microcolonies, and resist the effects of the host immune system and/or antibiotics. Alginate biosynthesis requires 12 proteins encoded by the algD operon, including AlgX, and although this protein is essential for polymer production, its exact role is unknown. In this study, we present the X-ray crystal structure of AlgX at 2.15 Å resolution. The structure reveals that AlgX is a two-domain protein, with an N-terminal domain with structural homology to members of the SGNH hydrolase superfamily and a C-terminal carbohydrate-binding module. A number of residues in the carbohydrate-binding module form a substrate recognition "pinch point" that we propose aids in alginate binding and orientation. Although the topology of the N-terminal domain deviates from canonical SGNH hydrolases, the residues that constitute the Ser-His-Asp catalytic triad characteristic of this family are structurally conserved. In vivo studies reveal that site-specific mutation of these residues results in non-acetylated alginate. This catalytic triad is also required for acetylesterase activity in vitro. Our data suggest that not only does AlgX protect the polymer as it passages through the periplasm but that it also plays a role in alginate acetylation. Our results provide the first structural insight for a wide group of closely related bacterial polysaccharide acetyltransferases.

Cell wall proteome of Clostridium thermocellum and detection of glycoproteins

Clostridium thermocellum, a thermophilic anaerobe, has the unusual capacity to convert cellulosic biomass into ethanol and hydrogen. In this work, the cell wall proteome of C. thermocellum was investigated. The proteins in the cell wall fraction of C. thermocellum prepared by the boiling SDS method were released by mutanolysin digestion and resolved on two-dimensional (2D) gel. One hundred and thirty-two proteins were identified by mass spectrometry, among which the extracellular solute-binding protein (CbpB/cthe_1020), enolase, glyceraldehyde-3-phosphate dehydrogenase and translation elongation factor EF-Tu were detected as highly abundant proteins. Besides the known surface localized proteins, including FtsZ, MinD, GroEL, DnaK, many enzymes involved in bioenergetics, such as alcohol dehydrogenases and hydrogenases were also detected. By glycan stain and MS analysis of glycopeptides, we identified CbpB as a glycoprotein, which is the second glycoprotein from C. thermocellum characterized. The fact that CbpB was highly abundant in the cell wall region and glycosylated, reflects its importance in substrate assimilation. Our results indicate cell wall proteins constitute a significant portion of cellular proteins and may play important physiological roles (i.e. bioenergetics) in this bacterium. The insights described are relevant for the development of C. thermocellum as a biofuel producer.

Comparison of the mesophilic cellulosome-producing Clostridium cellulovorans genome with other cellulosome-related clostridial genomes

Clostridium cellulovorans, an anaerobic and mesophilic bacterium, degrades native substrates in soft biomass such as corn fibre and rice straw efficiently by producing an extracellular enzyme complex called the cellulosome. Recently, we have reported the whole‐genome sequence of C. cellulovorans comprising 4220 predicted genes in 5.10 Mbp [Y. Tamaru et al., (2010) J. Bacteriol., 192: 901–902]. As a result, the genome size of C. cellulovorans was about 1 Mbp larger than that of other cellulosome‐producing clostridia, mesophilic C. cellulolyticum and thermophilic C. thermocellum. A total of 57 cellulosomal genes were found in the C. cellulovorans genome, and they coded for not only carbohydrate‐degrading enzymes but also a lipase, peptidases and proteinase inhibitors. Interestingly, two novel genes encoding scaffolding proteins were found in the genome. According to KEGG metabolic pathways and their comparison with 11 Clostridial genomes, gene expansion in the C. cellulovorans genome indicated mainly non‐cellulosomal genes encoding hemicellulases and pectin‐degrading enzymes. Thus, by examining genome sequences from multiple Clostridium species, comparative genomics offers new insight into genome evolution and the way natural selection moulds functional DNA sequence evolution. Our analysis, coupled with the genome sequence data, provides a roadmap for constructing enhanced cellulosome‐producing Clostridium strains for industrial applications such as biofuel production.

Functional insights into the role of novel type I cohesin and dockerin domains from Clostridium thermocellum

Cellulosomes, synthesized by anaerobic microorganisms such as Clostridium thermocellum, are remarkably complex nanomachines that efficiently degrade plant cell wall polysaccharides. Cellulosome assembly results from the interaction of type I dockerin domains, present on the catalytic subunits, and the cohesin domains of a large non-catalytic integrating protein that acts as a molecular scaffold. In general, type I dockerins contain two distinct cohesin-binding interfaces that appear to display identical ligand specificities. Inspection of the C. thermocellum genome reveals 72 dockerin-containing proteins. In four of these proteins, Cthe_0258, Cthe_0435, Cthe_0624 and Cthe_0918, there are significant differences in the residues that comprise the two cohesin-binding sites of the type I dockerin domains. In addition, a protein of unknown function (Cthe_0452), containing a C-terminal cohesin highly similar to the equivalent domains present in C. thermocellum-integrating protein (CipA), was also identified. In the present study, the ligand specificities of the newly identified cohesin and dockerin domains are described. The results revealed that Cthe_0452 is located at the C. thermocellum cell surface and thus the protein was renamed as OlpC. The dockerins of Cthe_0258 and Cthe_0435 recognize, preferentially, the OlpC cohesin and thus these enzymes are believed to be predominantly located at the surface of the bacterium. By contrast, the dockerin domains of Cthe_0624 and Cthe_0918 are primarily cellulosomal since they bind preferentially to the cohesins of CipA. OlpC, which is a relatively abundant protein, may also adopt a 'warehouse' function by transiently retaining cellulosomal enzymes at the cell surface before they are assembled on to the multienzyme complex.

PilM/N/O/P proteins form an inner membrane complex that affects the stability of the Pseudomonas aeruginosa type IV pilus secretin

The highly conserved pilM/N/O/P/Q gene cluster is among the core set of genes required for cell surface expression of type IV pili and associated twitching motility. With the exception of the outer membrane secretin, a multimer of PilQ subunits, the specific functions of the products encoded by this gene cluster are poorly characterized. Orthologous proteins in the related bacterial type II secretion system have been shown to interact to form an inner membrane complex required for protein secretion. In this study, we provide evidence that the PilM/N/O/P proteins form a functionally equivalent type IVa pilus complex. Using Pseudomonas aeruginosa as model organism, we found that all four proteins, including the nominally cytoplasmic PilM, colocalized to the inner membrane. Stability studies via Western blot analyses revealed that loss of one component has a negative impact on the levels of other members of the putative complex. Furthermore, complementation studies revealed that the stoichiometry of the components is important for the correct formation of a stable complex in vivo. We provide evidence that an intact inner membrane complex is required for optimal formation of the outer membrane complex of the type IVa pilus system in P. aeruginosa, as PilQ stability is negatively affected in its absence. Finally, we show that, in the absence of the pilin subunit, the levels of membrane-bound components of the inner membrane complex are negatively regulated by the PilR/S two-component system, suggesting a role for PilR/S in sensing the piliation status of the cell.

NET37, a nuclear envelope transmembrane protein with glycosidase homology, is involved in myoblast differentiation

The nuclear lamina and its associated proteins are important for nuclear structure and chromatin organization and also have been implicated in the regulation of cell signaling and gene expression. In this study we demonstrate that the lamina-associated nuclear envelope transmembrane protein NET37 is required for myogenic differentiation of C2C12 cells. NET37, a member of glycosidase family 31, is highly expressed in mouse skeletal muscle and is strongly up-regulated during C2C12 differentiation. By protease mapping we show that its glycosidase homology domain is located in the lumen of the nuclear envelope/endoplasmic reticulum. When NET37 is depleted from proliferating myoblasts by RNAi, myogenic differentiation is significantly impaired, and there is a concomitant delay in up-regulation of the late myogenic transcription factor myogenin. We expressed silencing-resistant NET37 mutated at a conserved residue in the glycosidase domain and found that this predicted catalytically inactive protein is unable to support myogenesis in cells depleted of wild type NET37. Therefore, the enzymatic function of NET37 appears to be important for myogenic differentiation. C2C12 cells depleted of NET37 have reduced activation of Akt after shifting to differentiation medium and are defective in insulin like growth factor-II (IGF-II) secretion, an autocrine/paracrine factor involved in Akt activation. We also observed that pro-IGF-II co-immunoprecipitates with NET37. Based on our results, we propose that NET37 has a role in IGF-II maturation in the secretory pathway during myoblast differentiation. The localization of NET37 at the nuclear envelope raises the possibility that it may coordinate myogenic events between the nuclear interior and the endoplasmic reticulum lumen via transmembrane communication.

The high-molecular-mass amylase (HMMA) of Geobacillus stearothermophilus ATCC 12980 interacts with the cell wall components by virtue of three specific binding regions

The complete nucleotide sequence encoding the high-molecular-mass amylase (HMMA) of Geobacillus stearothermophilus ATCC 12980 was established by PCR techniques. Based on the hmma gene sequence, the full-length rHMMA, four N- or C-terminal rHMMA truncations as well as three C-terminal rHMMA fragments were cloned and heterologously expressed in Escherichia coli. Purified rHMMA forms were used either for affinity studies with the recombinant (r) S-layer protein SbsC (rSbsC), peptidoglycan-containing sacculi (PGS) and pure peptidoglycan (PG) devoid of the secondary cell wall polymer (SCWP), or for surface plasmon resonance (SPR) studies using rSbsC and isolated SCWP. In the C-terminal part of the HMMA, three specific binding regions, one for each cell wall component (rSbsC, SCWP and PG), could be identified. The functionality of the PG-binding domain could be confirmed by replacing the main part of the SCWP-binding domain of an S-layer protein by the PG-binding domain of the HMMA. The present work describes a completely new and highly economic strategy for cell adhesion of an exoenzyme.

Impact of pretreated Switchgrass and biomass carbohydrates on Clostridium thermocellum ATCC 27405 cellulosome composition: a quantitative proteomic analysis

Background

Economic feasibility and sustainability of lignocellulosic ethanol production requires the development of robust microorganisms that can efficiently degrade and convert plant biomass to ethanol. The anaerobic thermophilic bacterium Clostridium thermocellum is a candidate microorganism as it is capable of hydrolyzing cellulose and fermenting the hydrolysis products to ethanol and other metabolites. C. thermocellum achieves efficient cellulose hydrolysis using multiprotein extracellular enzymatic complexes, termed cellulosomes.

Methodology/Principal Findings

In this study, we used quantitative proteomics (multidimensional LC-MS/MS and ¹⁵N-metabolic labeling) to measure relative changes in levels of cellulosomal subunit proteins (per CipA scaffoldin basis) when C. thermocellum ATCC 27405 was grown on a variety of carbon sources [dilute-acid pretreated switchgrass, cellobiose, amorphous cellulose, crystalline cellulose (Avicel) and combinations of crystalline cellulose with pectin or xylan or both]. Cellulosome samples isolated from cultures grown on these carbon sources were compared to ¹⁵N labeled cellulosome samples isolated from crystalline cellulose-grown cultures. In total from all samples, proteomic analysis identified 59 dockerin- and 8 cohesin-module containing components, including 16 previously undetected cellulosomal subunits. Many cellulosomal components showed differential protein abundance in the presence of non-cellulose substrates in the growth medium. Cellulosome samples from amorphous cellulose, cellobiose and pretreated switchgrass-grown cultures displayed the most distinct differences in composition as compared to cellulosome samples from crystalline cellulose-grown cultures. While Glycoside Hydrolase Family 9 enzymes showed increased levels in the presence of crystalline cellulose, and pretreated switchgrass, in particular, GH5 enzymes showed increased levels in response to the presence of cellulose in general, amorphous or crystalline.

Conclusions/Significance

Overall, the quantitative results suggest a coordinated substrate-specific regulation of cellulosomal subunit composition in C. thermocellum to better suit the organism's needs for growth under different conditions. To date, this study provides the most comprehensive comparison of cellulosomal compositional changes in C. thermocellum in response to different carbon sources. Such studies are vital to engineering a strain that is best suited to grow on specific substrates of interest and provide the building blocks for constructing designer cellulosomes with tailored enzyme composition for industrial ethanol production.

PilF is an outer membrane lipoprotein required for multimerization and localization of the Pseudomonas aeruginosa Type IV pilus secretin

Type IV pili (T4P) are retractile appendages that contribute to the virulence of bacterial pathogens. PilF is a Pseudomonas aeruginosa lipoprotein that is essential for T4P biogenesis. Phenotypic characterization of a pilF mutant confirmed that T4P-mediated functions are abrogated: T4P were no longer present on the cell surface, twitching motility was abolished, and the mutant was resistant to infection by T4P retraction-dependent bacteriophage. The results of cellular fractionation studies indicated that PilF is the outer membrane pilotin required for the localization and multimerization of the secretin, PilQ. Mutation of the putative PilF lipidation site untethered the protein from the outer membrane, causing secretin assembly in both inner and outer membranes. T4P-mediated twitching motility and bacteriophage susceptibility were moderately decreased in the lipidation site mutant, while cell surface piliation was substantially reduced. The tethering of PilF to the outer membrane promotes the correct localization of PilQ and appears to be required for the formation of stable T4P. Our 2.0-A structure of PilF revealed a superhelical arrangement of six tetratricopeptide protein-protein interaction motifs that may mediate the contacts with PilQ during secretin assembly. An alignment of pseudomonad PilF sequences revealed three highly conserved surfaces that may be involved in PilF function.

The metagenome of a biogas-producing microbial community of a production-scale biogas plant fermenter analysed by the 454-pyrosequencing technology

Composition and gene content of a biogas-producing microbial community from a production-scale biogas plant fed with renewable primary products was analysed by means of a metagenomic approach applying the ultrafast 454-pyrosequencing technology. Sequencing of isolated total community DNA on a Genome Sequencer FLX System resulted in 616,072 reads with an average read length of 230 bases accounting for 141,664,289 bases sequence information. Assignment of obtained single reads to COG (Clusters of Orthologous Groups of proteins) categories revealed a genetic profile characteristic for an anaerobic microbial consortium conducting fermentative metabolic pathways. Assembly of single reads resulted in the formation of 8752 contigs larger than 500 bases in size. Contigs longer than 10kb mainly encode house-keeping proteins, e.g. DNA polymerase, recombinase, DNA ligase, sigma factor RpoD and genes involved in sugar and amino acid metabolism. A significant portion of contigs was allocated to the genome sequence of the archaeal methanogen Methanoculleus marisnigri JR1. Mapping of single reads to the M. marisnigri JR1 genome revealed that approximately 64% of the reference genome including methanogenesis gene regions are deeply covered. These results suggest that species related to those of the genus Methanoculleus play a dominant role in methanogenesis in the analysed fermentation sample. Moreover, assignment of numerous contig sequences to clostridial genomes including gene regions for cellulolytic functions indicates that clostridia are important for hydrolysis of cellulosic plant biomass in the biogas fermenter under study. Metagenome sequence data from a biogas-producing microbial community residing in a fermenter of a biogas plant provide the basis for a rational approach to improve the biotechnological process of biogas production.

Cohesin-dockerin microarray: Diverse specificities between two complementary families of interacting protein modules

The cellulosome is an intricate multienzyme complex, designed for efficient degradation of plant cell wall polysaccharides, notably cellulose. The supramolecular cellulosome architecture in different bacteria is the consequence of the types and specificities of the interacting cohesin and dockerin modules, borne by the different cellulosomal subunits. In this study, we describe a microarray system for determining cohesin-dockerin specificity, which allows global comparison among the interactions between various members of these two complementary families of interacting protein modules. Matching recombinant fusion proteins were prepared that contained one of the interacting modules: cohesins were joined to an appropriate cellulose-binding module (CBM) and the dockerins were fused to a thermostable xylanase that served to enhance expression and proper folding. The CBM-fused cohesins were immobilized on cellulose-coated glass slides, to which xylanase-fused dockerin samples were applied. Knowledge of the specificity characteristics of native and mutated members of the cohesin and dockerin families provides insight into the architecture of the parent cellulosome and allows selection of suitable cohesin-dockein pairs for biotechnological and nanotechnological application. Using this approach, extensive cross-species interaction among type-II cohesins and dockerins is shown for the first time. Selective intraspecies binding of an archaeal dockerin to two complementary cohesins is also demonstrated.

Different proportions of cadmium occur as Cd-binding phytochelatin complexes in plants

The aim was to determine cadmium (Cd) speciation in various plants, between buffer-soluble and acid-soluble Cd, and also within the buffer-soluble Cd. A better understanding of Cd speciation shows the relative importance of different biological mechanisms for Cd sequestration. Roots of Pistia stratiodes, Eichhornia crassipes, Agrostis gigantea, Deschampsia caespitosa and wheat Triticum turgidum var. durum were analyzed. Buffer extractions solubilized varying proportions of Cd, ranging from 12% in Eichhornia to 83% in Agrostis. The proportion increased with time of Cd exposure in Pistia. It also increased in wheat roots as the external Cd rose from 0.05 to 0.5 muM and was lowest in old leaves and highest in roots. The remaining Cd was extractable with acid. Gel filtration resolved buffer-soluble Cd into three peaks distinct from inorganic Cd. Two complexes with phytochelatins and related polythiols were present in all cases, inorganic Cd being prominent only in Eichhornia extracts. The phytochelatin complexes accounted for 2% of the root Cd in Eichhornia to 78% in Agrostis. In wheat, phytochelatins bound 82% of the Cd in roots, 19% in young leaves and 12% in old leaves. The cysteine-rich protein metallothionein from wheat was detected immunologically in the void volume of gel filtrations of old and young leaves, but not of roots, and was distinct from the two phytochelatin-based complexes. Speciation of Cd in the various plants indicated that phytochelatins were not necessarily the major ligands of Cd.

In vivo functional characterization of the Saccharomyces cerevisiae 60S biogenesis GTPase Nog1

The Saccharomyces cerevisiae Nog1 GTPase is critical for assembly of the large ribosomal subunit. Mutations in conserved residues in the GTP-binding pocket cause defects in cell growth and 60S ribosome assembly but mutant proteins retain their ability to associate with the pre-60S. Association of Nog1 with the pre-60S is independent of guanine nucleotide added to cell extracts. Thus, it appears that nucleotide occupancy does not substantially affect Nog1 association with pre-60S particles. Somewhat surprisingly, neither of the conserved threonines in the G2 motif of the GTPase domain is essential for Nog1 function. Neither the steady-state rRNA levels nor the protein composition (as determined by isobaric labeling and identification by mass spectrometry of peptides) of the pre-60S particles in the nog1P176V mutant are grossly perturbed, although levels of four proteins (Nog1, Nop2, Nop15, and Tif6) are modestly reduced in pre-60S particles isolated from the mutant. Deletion analysis revealed that the C-terminal 168 amino acids are not required for function; however, the N-terminal 126 amino acids are required. Optimal association with pre-60S particles requires sequences between amino acids 347-456. Several conserved charge-to-alanine substitutions outside the GTPase domain display modest growth phenotypes indicating that these residues are not critical for function.

The osmotic activation of transporter ProP is tuned by both its C-terminal coiled-coil and osmotically induced changes in phospholipid composition

Transporter ProP of Escherichia coli (ProPEc) senses extracellular osmolality and mediates osmoprotectant uptake when it is rising or high. A replica of the ProPEc C terminus (Asp468-Arg497) forms an intermolecular alpha-helical coiled-coil. This structure is implicated in the osmoregulation of intact ProPEc, in vivo. Like that from Corynebacterium glutamicum (ProPCg), the ProP orthologue from Agrobacterium tumefaciens (ProPAt) sensed and responded to extracellular osmolality after expression in E. coli. The osmotic activation profiles of all three orthologues depended on the osmolality of the bacterial growth medium, the osmolality required for activation rising as the growth osmolality approached 0.7 mol/kg. Thus, each could undergo osmotic adaptation. The proportion of cardiolipin in a polar lipid extract from E. coli increased with extracellular osmolality so that the osmolality activating ProPEc was a direct function of membrane cardiolipin content. Group A ProP orthologues (ProPEc, ProPAt) share the C-terminal coiled-coil domain and were activated at low osmolalities. Like variant ProPEc-R488I, in which the C-terminal coiled-coil is disrupted, ProPEc derivatives that lack the coiled-coil and Group B orthologue ProPCg required a higher osmolality to activate. The amplitude of ProPEc activation was reduced 10-fold in its deletion derivatives. The coiled-coil structure is not essential for osmotic activation of ProP per se. However, it tunes Group A orthologues to osmoregulate over a low osmolality range. Coiled-coil lesions may impair both coiled-coil formation and interaction of ProPEc with amplifier protein ProQ. Cardiolipin may contribute to ProP adaptation by altering bulk membrane properties or by acting as a ProP ligand.

Cellulase, clostridia, and ethanol

Biomass conversion to ethanol as a liquid fuel by the thermophilic and anaerobic clostridia offers a potential partial solution to the problem of the world's dependence on petroleum for energy. Coculture of a cellulolytic strain and a saccharolytic strain of Clostridium on agricultural resources, as well as on urban and industrial cellulosic wastes, is a promising approach to an alternate energy source from an economic viewpoint. This review discusses the need for such a process, the cellulases of clostridia, their presence in extracellular complexes or organelles (the cellulosomes), the binding of the cellulosomes to cellulose and to the cell surface, cellulase genetics, regulation of their synthesis, cocultures, ethanol tolerance, and metabolic pathway engineering for maximizing ethanol yield.

Hydrophilic domains of scaffolding protein CbpA promote glycosyl hydrolase activity and localization of cellulosomes to the cell surface of Clostridium cellulovorans

CbpA, the scaffolding protein of Clostridium cellulovorans cellulosomes, possesses one family 3 cellulose binding domain, nine cohesin domains, and four hydrophilic domains (HLDs). Among the three types of domains, the function of the HLDs is still unknown. We proposed previously that the HLDs of CbpA play a role in attaching the cellulosome to the cell surface, since they showed some homology to the surface layer homology domains of EngE. Several recombinant proteins with HLDs (rHLDs) and recombinant EngE (rEngE) were examined to determine their binding to the C. cellulovorans cell wall fraction. Tandemly linked rHLDs showed higher affinity for the cell wall than individual rHLDs showed. EngE was shown to have a higher affinity for cell walls than rHLDs have. C. cellulovorans native cellulosomes were found to have higher affinity for cell walls than rHLDs have. When immunoblot analysis was carried out with the native cellulosome fraction bound to cell wall fragments, the presence of EngE was also confirmed, suggesting that the mechanism anchoring CbpA to the C. cellulovorans cell surface was mediated through EngE and that the HLDs play a secondary role in the attachment of the cellulosome to the cell surface. During a study of the role of HLDs on cellulose degradation, the mini-cellulosome complexes with HLDs degraded cellulose more efficiently than complexes without HLDs degraded cellulose. The rHLDs also showed binding affinity for crystalline cellulose and carboxymethyl cellulose. These results suggest that the CbpA HLDs play a major role and a minor role in C. cellulovorans cellulosomes. The primary role increases cellulose degradation activity by binding the cellulosome complex to the cellulose substrate; secondarily, HLDs aid the binding of the CbpA/cellulosome to the C. cellulovorans cell surface.

A novel Acetivibrio cellulolyticus anchoring scaffoldin that bears divergent cohesins

Sequencing of a cellulosome-integrating gene cluster in Acetivibrio cellulolyticus was completed. The cluster contains four tandem scaffoldin genes (scaA, scaB, scaC, and scaD) bounded upstream and downstream, respectively, by a presumed cellobiose phosphorylase and a nucleotide methylase. The sequences and properties of scaA, scaB, and scaC were reported previously, and those of scaD are reported here. The scaD gene encodes an 852-residue polypeptide that includes a signal peptide, three cohesins, and a C-terminal S-layer homology (SLH) module. The calculated molecular weight of the mature ScaD is 88,960; a 67-residue linker segment separates cohesins 1 and 2, and two approximately 30-residue linkers separate cohesin 2 from 3 and cohesin 3 from the SLH module. The presence of an SLH module in ScaD indicates its role as an anchoring protein. The first two ScaD cohesins can be classified as type II, similar to the four cohesins of ScaB. Surprisingly, the third ScaD cohesin belongs to the type I cohesins, like the seven ScaA cohesins. ScaD is the first scaffoldin to be described that contains divergent types of cohesins as integral parts of the polypeptide chain. The recognition properties among selected recombinant cohesins and dockerins from the different scaffoldins of the gene cluster were investigated by affinity blotting. The results indicated that the divergent types of ScaD cohesins also differ in their preference of dockerins. ScaD thus plays a dual role, both as a primary scaffoldin, capable of direct incorporation of a single dockerin-borne enzyme, and as a secondary scaffoldin that anchors the major primary scaffoldin, ScaA and its complement of enzymes to the cell surface.

The bacterial scaffoldin: structure, function and potential applications in the nanosciences

Natural protein complexes may provide the best templates for nanometer-scale technology and new biomaterials. The bacterial cellulosome is becoming a well-understood multi-protein complex found in cellulolytic microorganisms. The scaffoldin subunits of the bacterial cellulosome function to organize and position other protein subunits into the complex. The scaffoldins can also serve as an attachment device for harnessing the cellulosome onto the cell surface and/or for its targeting to substrate. Biochemical and molecular biological evidence have identified a receptor/adaptor type of protein domain pair, called "cohesin and dockerin," which is responsible for cellulosome self-assembly. The recognition between cohesin and dockerin is generally type and/or species specific. More than 80 cohesin and 100 dockerin sequences have been found, mostly from anaerobic bacteria. X-ray crystallography and NMR have been used to determine the three-dimensional structures of representative cohesin and dockerin domains, respectively. The cohesin peptide is about 140 amino acids in length and highly conserved in sequence and domain structure. The dockerin domain comprises about 70 amino acids and contains two 22 amino acid duplicated regions, each of which includes an "F-hand" modification of the EF-hand calcium-binding motif. Biochemical evidence and site-directed mutagenesis have confirmed that the two F-hand motifs are required for function and calcium dependence; at least two amino acids from each motif are critical for cohesin-dockerin recognition. In this report, we review the structure and function of the scaffoldin of the bacterial cellulosome and emphasize a detailed sequence analysis of the cohesin and dockerin domains. We also speculate about potential applications in nanoscience that may be based on cohesin-dockerin recognition.

Regulation of expression of scaffoldin-related genes in Clostridium thermocellum

Clostridium thermocellum produces an extracellular multienzyme complex, termed the cellulosome, that allows efficient solubilization of crystalline cellulose. The complex is organized around a large noncatalytic protein subunit, termed CipA or scaffoldin, and is found either free in the supernatant or cell bound. The binding of the complex to the cell is mediated by three cell surface anchoring proteins, OlpB, Orf2p, and SdbA, that interact with the CipA scaffoldin. The transcriptional level of the olpB, orf2, sdbA, and cipA genes was determined quantitatively by RNase protection assays in batch and continuous cultures, under carbon and nitrogen limitation. The mRNA level of olpB, orf2, and cipA varied with growth rate, reaching 40 to 60 transcripts per cell under carbon limitation at a low growth rate of 0.04 h(-1) and 2 to 10 transcripts per cell at a growth rate of 0.35 h(-1) in batch culture. The mRNA level of sdbA was about three transcripts per cell and was not influenced by growth rate. Primer extension analysis revealed two major transcriptional start sites, at -81 and -50 bp, upstream of the translational start site of the cipA gene. The potential promoters exhibited homology to the known sigma factors sigma(A) and sigma(L) (sigma(54)) of Bacillus subtilis. Transcription from the sigma(L)-like promoter was found under all growth conditions, whereas transcription from the sigma(A)-like promoter was significant only under carbon limitation. The overall expression level obtained in the primer extension analysis was in good agreement with the results of the RNase-protection assays.

Cell-cycle-regulated expression and subcellular localization of the Caulobacter crescentus SMC chromosome structural protein

Structural maintenance of chromosomes proteins (SMCs) bind to DNA and function to ensure proper chromosome organization in both eukaryotes and bacteria. Caulobacter crescentus possesses a single SMC homolog that plays a role in organizing and segregating daughter chromosomes. Approximately 1,500 to 2,000 SMC molecules are present per cell during active growth, corresponding to one SMC complex per 6,000 to 8,000 bp of chromosomal DNA. Although transcription from the smc promoter is induced during early S phase, a cell cycle transcription pattern previously observed with multiple DNA replication and repair genes, the SMC protein is present throughout the entire cell cycle. Examination of the intracellular location of SMC showed that in swarmer cells, which do not replicate DNA, the protein forms two or three foci. Stalked cells, which are actively engaged in DNA replication, have three or four SMC foci per cell. The SMC foci appear randomly distributed in the cell. Many predivisional cells have bright polar SMC foci, which are lost upon cell division. Thus, chromosome compaction likely involves dynamic aggregates of SMC bound to DNA. The aggregation pattern changes as a function of the cell cycle both during and upon completion of chromosome replication.

Two new cellulosome components encoded downstream of celI in the genome of Clostridium thermocellum: the non-processive endoglucanase CelN and the possibly structural protein CseP

Clostridium thermocellum produces a great number of extracellular cellulases which are free or cellulosome-bound. The nucleotide sequence of a gene cluster containing the genes celI, celN and cseP was determined from C. thermocellum strain F7. Gene products Cel9I and Cel9N are structurally related enzymes having a glycosyl hydrolase family 9 and a carbohydrate-binding module (CBM3c), but show characteristic differences: Cel9I is a non-cellulosomal protein with an additional CBM (CBM3b), whereas Cel9N contains a cellulosomal dockerin module and no additional CBM. Although Cel9I is a processive endoglucanase, Cel9N is non-processive. Both enzymes hydrolyse phosphoric acid swollen cellulose, but the products of hydrolysis are different. The CseP protein encoded in the gene cluster is the first component attached to the cellulosomal scaffoldin for which no catalytic activity could be detected. It was shown to be present in the cellulosome. Its sequence is homologous to the spore-coat assembly protein CotH of Bacillus subtilis, suggesting a structural role of CseP in the cellulosome.

Pseudomonas aeruginosa O-antigen chain length is determined before ligation to lipid A core

Pseudomonas aeruginosa is a Gram-negative opportunistic pathogen that infects immunocompromised patients and trauma victims and causes fatal lung infections in people with cystic fibrosis. This microorganism produces a number of virulence factors, one of which is lipopolysaccharide (LPS), which has been shown to mediate many biological effects including resistance to serum killing and phagocytosis. These biological activities have been correlated to the length of the O-polysaccharide and its distribution on the outer membrane. Wzz is responsible for regulation of the size distribution of the O-antigen. Wzz has been found to participate solely in the Wzy-dependent pathway for LPS biosynthesis, which produces heteropolymeric O-polysaccharide such as the B-band LPS of P. aeruginosa. Our laboratory has previously reported characterization of a Wzz protein encoded in the B-band O-antigen biosynthesis cluster of PAO1. The availability of the genome sequence of P. aeruginosa PAO1 has made it possible to identify a second functional Wzz protein (PA0938, Wzz2). Gene replacement was used to generate an unmarked wzz2delta knock-out and a wzz2delta/wzz1::Gm double knock-out. As expected, the wzz2delta strain produced LPS with modal length imparted by Wzz1, and the wzz2delta/wzz1::Gm strain produced LPS O-antigen with a non-modal (random) length. Both wzz1 and wzz2 from P. aeruginosa PAO1 were cloned and expressed with an N-terminal His6 tag. His6-Wzz1 and His6-Wzz2 were purified to near homogeneity by immobilized metal affinity chromatography (IMAC). These preparations were used to develop specific polyclonal antibodies against each of the proteins. In vivo protein cross-linking followed by Western immunoblotting indicated that Wzz1 forms dimers whereas Wzz2 forms octamers. By generation of a wzz2delta/rmlC double mutant and analysis of the LPS, we have made the novel observation that polymerization of modal chain length-distributed O-antigen occurred before ligation to the lipid A core. We have shown an association between the Wzz proteins and O-antigen polymer chains using immunoprecipitation with anti-O5 O-antigen monoclonal antibody MF15-4. Both Wzz1 and Wzz2 could be co-precipitated with O5 polymer.

Cell-surface-anchoring role of N-terminal surface layer homology domains of Clostridium cellulovorans EngE

engE, coding for endoglucanase E, one of the three major subunits of the Clostridium cellulovorans cellulosome, has been cloned and sequenced (Y. Tamaru and R. H. Doi, J. Bacteriol. 181:3270-3276, 1999). The N-terminal-half region of EngE possesses three repeated surface layer homology (SLH) domains, which are homologous to those of some bacterial S-layer proteins. Also, the C-terminal-half region consists of a catalytic domain of glycosyl hydrolase family 5 and a duplicated sequence (dockerin) for binding EngE to scaffolding protein CbpA. Our hypothesis is that the SLH domains serve in the role of anchoring to the cell surface. This model was investigated by using recombinant EngEs (rEngE) with and without SLH domains that were synthesized in Escherichia coli and cell wall preparations from C. cellulovorans. When rEngE and SLH polypeptides of EngE were incubated with cell wall fragments prepared by sodium dodecyl sulfate treatment, these proteins bound strongly to the cell wall. However, rEngEs without SLH domains lost their ability to bind to cell walls. When rEngE was incubated with mini-CbpA, consisting of two cohesin domains, and cell wall fragments, the mini-CbpA was able to bind to the cell wall with rEngE. However, the binding of mini-CbpA was dramatically inhibited by addition of a chelating reagent, such as EDTA, which prevents cohesin-dockerin interactions. These results suggest not only that the SLH domains of EngE can bind to the cell surface but also that EngE plays an anchoring role for cellulosomes through the interaction of its dockerin domain with a CbpA cohesin.

A newly described cellulosomal cellobiohydrolase, CelO, from Clostridium thermocellum: investigation of the exo-mode of hydrolysis, and binding capacity to crystalline cellulose

The sequence of the celO gene from Clostridium thermocellum F7 was determined. The gene product, cellulase CelO (Ct-Cel5F), had a modular structure consisting of a carbohydrate-binding module of the CBM3 family and a catalytic domain of the glycosyl hydrolase family 5. The presence of the dockerin module indicated that the enzyme was a component of the cellulosome complex. The thermostable recombinant gene product was active on cellodextrins, barley beta-glucan, carboxymethylcellulose and insoluble cellulose. Cellobiose was the only product released from amorphic and crystalline cellulose, cellotetraose and higher cello-oligosaccharides, identifying CelO as a cellobiohydrolase. The cleavage pattern of p-nitrophenyl beta-D-cellotetraoside, blockage of the hydrolysis of NaBH(4)-reduced cellopentaose and the reduction in substrate viscosity suggested activity from the reducing end in a processive mode after making random cuts. Binding to insoluble, i.e. amorphous, and crystalline cellulose was mediated by the carbohydrate-binding module CBM3b, with a preference for the crystalline substrate.

Bacteriophage phiYeO3-12, specific for Yersinia enterocolitica serotype O:3, is related to coliphages T3 and T7

Bacteriophage phiYeO3-12 is a lytic phage of Yersinia enterocolitica serotype O:3. The phage receptor is the lipopolysaccharide O chain of this serotype that consists of the rare sugar 6-deoxy-L-altropyranose. A one-step growth curve of phiYeO3-12 revealed eclipse and latent periods of 15 and 25 min, respectively, with a burst size of about 120 PFU per infected cell. In electron microscopy phiYeO3-12 virions showed pentagonal outlines, indicating their icosahedral nature. The phage capsid was shown to be composed of at least 10 structural proteins, of which a protein of 43 kDa was predominant. N-terminal sequences of three structural proteins were determined, two of them showing strong homology to structural proteins of coliphages T3 and T7. The phage genome was found to consist of a double-stranded DNA molecule of 40 kb without cohesive ends. A physical map of the phage DNA was constructed using five restriction enzymes. The phage infection could be effectively neutralized using serum from a rabbit immunized with whole phiYeO3-12 particles. The antiserum also neutralized T3 infection, although not as efficiently as that of phiYeO3-12. phiYeO3-12 was found to share, in addition to the N-terminal sequence homology, several common features with T3, including morphology and nonsubjectibility to F exclusion. The evidence conclusively indicated that phiYeO3-12 is the first close relative of phage T3 to be described.

Enzymatic degradation of cellulose acetate plastic by Novel degrading bacterium Bacillus sp. S2055

Cellulose acetate (CA)-degrading bacteria were isolated from samples obtained from environments at a population size of 6.7 x 10(1) to 1.0 x 10(8) halo-forming cfu/ml-water or g-solid, suggesting their ubiquitous presence. The classification of 35 isolated strains of CA-degrading bacteria into 15 genera indicates that CA-degrading activity is over a wide range of taxonomical groups. From these isolates, Bacillus sp. S2055 was found to be the most efficient CA-degrading bacterium, and its CA-degrading enzyme(s) was partially characterized. The weight loss of CA plastic film (degree of substitution (DS)=1.7) in the culture of S2055 was less than 12% after a 35-d culture while that in the crude enzyme solution extracted from the culture supernatant reached 62% after the same period. Lipase and cellulase activities were detected in the culture supernatant of strain S2055. The crude enzyme solution contained three major protein fractions that have different mean molecular weights (MWs). Fraction I with the highest MW exhibited both lipase and cellulase activities, while fraction II and III exhibited only lipase activity. Fraction I significantly deacetylated CA (DS 1.5) and fragmented CA plastic film into pieces while the other fractions failed to do so even when used in combination with commercially-available cellulases and lipases. The lipase activity of fraction I against various substrates differed considerably from those of known lipases. It was thus suggested that deacetylation of CA mediated by an enzyme with such a peculiar lipase-like activity is a requisite for the efficient biodegradation of CA plastics.

Analysis of Shigella flexneri wzz (Rol) function by mutagenesis and cross-linking: wzz is able to oligomerize

The modal length or degree of polymerization (dp) of the Shigella flexneri O-antigen is determined in an unknown manner by the Wzz/Rol protein. The Wzz protein is anchored into the cytoplasmic membrane by two transmembrane domains (TM1 amino acids 32-52; TM2 amino acids 295-315) with the central loop of the protein located in the periplasm. Plasmids were constructed encoding hybrid Wzz proteins consisting of regions of S. flexneri Wzz (WzzSF) and Salmonella typhimurium Wzz (WzzST). These imparted O-antigen modal chain lengths that implied that the carboxy-terminal region of Wzz was involved in chain length determination. Site-directed mutagenesis was undertaken to investigate the functional significance of highly conserved residues in amino-/carboxy-terminal domains of WzzSF. Some of the WzzSF variants resulted in O-antigen modal chain lengths much shorter than those of wild-type WzzSF, whereas other mutants inactivated WzzSF function entirely and a third class had a longer O-antigen chain length distribution. The data indicate that amino acids throughout the length of the WzzSF protein are important in determination of O-antigen modal chain length. In vivo cross-linking experiments were performed to investigate the interactions between Wzz proteins. The experiments indicated that the WzzSF protein is able to form dimers and oligomers of at least six WzzSF proteins. A carboxy-terminal-truncated WzzSF protein having the amino terminal 194 amino acids was able to oligomerize, indicating that the amino-terminal region is sufficient for the Wzz-Wzz interaction observed. Shortened WzzSF proteins having internal deletions in the amino-terminal region were also able to oligomerize, suggesting that residues 59-194 are not essential for oligomerization. Cross-linking of WzzSF proteins with mutationally altered residues showed that loss of WzzSF function may be correlated to a reduced/altered ability to form oligomers, and that mutational alteration of glycine residues in the TM2 segment affects WzzSF-WzzSF dimer mobility in SDS polyacrylamide gels. These results provide the first evidence of protein-protein interactions for proteins involved in O-antigen polysaccharide biosynthesis.

Sequence analysis of scaffolding protein CipC and ORFXp, a new cohesin-containing protein in Clostridium cellulolyticum: comparison of various cohesin domains and subcellular localization of ORFXp

The gene encoding the scaffolding protein of the cellulosome from Clostridium cellulolyticum, whose partial sequence was published earlier (S. Pagès, A. Bélaïch, C. Tardif, C. Reverbel-Leroy, C. Gaudin, and J.-P. Bélaïch, J. Bacteriol. 178:2279-2286, 1996; C. Reverbel-Leroy, A. Bélaïch, A. Bernadac, C. Gaudin, J. P. Bélaïch, and C. Tardif, Microbiology 142:1013-1023, 1996), was completely sequenced. The corresponding protein, CipC, is composed of a cellulose binding domain at the N terminus followed by one hydrophilic domain (HD1), seven highly homologous cohesin domains (cohesin domains 1 to 7), a second hydrophilic domain, and a final cohesin domain (cohesin domain 8) which is only 57 to 60% identical to the seven other cohesin domains. In addition, a second gene located 8.89 kb downstream of cipC was found to encode a three-domain protein, called ORFXp, which includes a cohesin domain. By using antiserum raised against the latter, it was observed that ORFXp is associated with the membrane of C. cellulolyticum and is not detected in the cellulosome fraction. Western blot and BIAcore experiments indicate that cohesin domains 1 and 8 from CipC recognize the same dockerins and have similar affinity for CelA (Ka = 4.8 x 10(9) M-1) whereas the cohesin from ORFXp, although it is also able to bind all cellulosome components containing a dockerin, has a 19-fold lower Ka for CelA (2.6 x 10(8) M-1). Taken together, these data suggest that ORFXp may play a role in cellulosome assembly.

Influence of Divalent Cations and pH on Adsorption of a Bacterial Polysaccharide Adhesin

Hyphomonas MHS-3 (MHS-3) elaborates a diffuse capsular material, primarily composed of polysaccharide, which has been implicated to serve as the holdfast of this prosthecate marine bacterium. A purified polysaccharide (fr2ps) from this capsular material exhibits a relatively large affinity for (Ge), or more precisely for the Ge oxide surface film. In its natural habitat MHS-3 attaches to marine sediments. This suggests that molecular properties of fr2ps have evolved to render it adhesive toward mineral oxides. In order to characterize these molecular interactions, the effect of divalent cations and pH on the adsorption of fr2ps to Ge has been measured using attenuated total internal reflection Fourier transform infrared (ATR/FT-IR) spectroscopy. The effect of adsorption of fr2ps on the Ge oxide film has been investigated using X-ray photoelectron spectroscopy (XPS). The results indicate that divalent cations participate in binding of fr2ps to Ge oxide and that atomic size of the cation is important. Evidence for significant participation of hydrogen bonding to the oxide surface is lacking. Copyright 1998 Academic Press.

Morphological adaptation and inhibition of cell division during stationary phase in Caulobacter crescentus

During exponential growth, each cell cycle of the alpha-purple bacterium Caulobacter crescentus gives rise to two different cell types: a motile swarmer cell and a sessile stalked cell. When cultures of C. crescentus are grown for extended periods in complex (PYE) medium, cells undergo dramatic morphological changes and display increased resistance to stress. After cultures enter stationary phase, most cells are arrested at the predivisional stage. For the first 6-8 days after inoculation, the colony-forming units (cfu) steadily decrease from 10(9) cfu ml(-1) to a minimum of 3x10(7) cfu ml(-1) after which cells gradually adopt an elongated helical morphology. For days 9-12, the cfu of the culture increase and stabilize around 2 x 10(8) cfu ml(-1). The viable cells have an elongated helical morphology with no constrictions and an average length of 20 microm, which is 15-20 times longer than exponentially growing cells. The level of the cell division initiation protein FtsZ decreases during the first week in stationary phase and remains at a low constant level consistent with the lack of cell division. When resuspended in fresh medium, the elongated cells return to normal size and morphology within 12 h. Cells that have returned from stationary phase proceed through the same developmental changes when they are again grown for an extended period and have not acquired a heritable growth advantage in stationary phase (GASP) compared with overnight cultures. We conclude that the changes observed in prolonged cultures are the result of entry into a new developmental pathway and are not due to mutation.

Cellulase and hemicellulase genes of Clostridium thermocellum from five independent collections contain few overlaps and are widely scattered across the chromosome

Five independent collections, comprising a total of 34 clones encoding cellulases, hemicellulases and cell surface proteins of Clostridium thermocellum, were searched for overlapping or contiguous DNA fragments. The clones were hybridized to large genomic restriction fragments separated by pulse-field electrophoresis. Clones hybridizing to the same fragment were further compared by hybridization to smaller fragments, by cross-hybridization and by restriction mapping. The probes hybridized to loci which were usually not clustered and were scattered over at least one third of the chromosome. Besides previously identified clusters, only two clones were found to be adjacent. Two pairs of clones appeared to contain the same genes cloned in duplicate, and one of the genes was shown to be cloned in triplicate.

Cell cycle-dependent transcriptional and proteolytic regulation of FtsZ in Caulobacter

In the differentiating bacterium Caulobacter crescentus, the cell division initiation protein FtsZ is present in only one of the two cell types. Stalked cells initiate a new round of DNA replication immediately after cell division and contain FtsZ, whereas the progeny swarmer cells are unable to initiate DNA replication and do not contain FtsZ. We show that FtsZ expression is controlled by cell cycle-dependent transcription and proteolysis. Transcription of ftsZ is repressed in swarmer cells and is activated concurrently with the initiation of DNA replication. At the end of the DNA replication period, transcription of ftsZ decreases substantially. We show that the global cell cycle regulator CtrA is involved in the cell cycle control of ftsZ transcription. CtrA binds to a site that overlaps the ftsZ transcription start site. Removal of the CtrA-binding site results in transcription of the ftsZ promoter in swarmer cells. Decreasing the cellular concentration of CtrA increases ftsZ transcription and conversely, increasing the concentration of CtrA decreases ftsZ transcription. Because CtrA is present in swarmer cells, is degraded at the same time as ftsZ transcription begins, and reappears when ftsZ transcription decreases at the end of the cell cycle, we propose that CtrA is a repressor of ftsZ transcription. We show that proteolysis is an important determinant of cell type-specific distribution and cell cycle variation of FtsZ. FtsZ is stable when it is synthesized and assembles into the cytokinetic ring at the beginning of the cell cycle. After the initiation of cell division, the rate of FtsZ degradation increases as both the constriction site and the FtsZ ring decrease in diameter. When ftsZ is expressed constitutively from inducible promoters, the abundance of FtsZ still varies during the cell cycle. The coupling of transcription and proteolysis to cell division ensures that FtsZ is inherited only by the progeny cell that will begin DNA replication immediately after cell division.

Dominant C-terminal deletions of FtsZ that affect its ability to localize in Caulobacter and its interaction with FtsA

The cell division protein FtsZ is composed of three regions based on sequence similarity: a highly conserved N-terminal region of approximately 320 amino acids; a variable spacer region; and a conserved C-terminal region of eight amino acids. We show that FtsZ mutants missing different C-terminal fragments have dominant lethal effects because they block cell division in Caulobacter crescentus by two different mechanisms. Removal of the C-terminal conserved region, the linker, and 40 amino acids from the end of the N-terminal conserved region (FtsZdeltaC281) prevents the localization or the polymerization of FtsZ. Because two-hybrid analysis indicates that FtsZdeltaC281 does not interact with FtsZ, we hypothesize that FtsZdeltaC281 blocks cell division by competing with a factor required for FtsZ localization or that it titrates a factor required for the stability of the FtsZ ring. The removal of 24 amino acids from the C-terminus of FtsZ (FtsZdeltaC485) causes a punctate pattern of FtsZ localization and affects its interaction with FtsA. This suggests that the conserved C-terminal region of FtsZ is required for proper polymerization of FtsZ in Caulobacter and for its interaction with FtsA.

Identification of a region responsible for binding to the cell wall within the S-layer protein of Clostridium thermocellum

The protomer forming the S-layer of Clostridium thermocellum was identified as a 140 kDa protein which was non-covalently bound to the cell wall. Cloning and sequencing of the corresponding gene revealed an open reading frame of 3108 nucleotides encoding a polypeptide of 1036 amino acids, termed SlpA. The amino acid composition of SlpA matches the composition of a previously described exocellular glycoprotein. SlpA shared extensive similarity with the S-layer protein of Bacillus sphaericus and with the outer wall protein of Bacillus brevis. In addition, the amino-terminal region of SlpA contained a segment presenting similarities with segments termed SLH (S-layer homologous), which are found in several bacterial exoproteins. A polypeptide of 209 residues comprising this segment was shown to bind to cell walls extracted from C. thermocellum cells.

The crystal structure of a type I cohesin domain at 1.7 A resolution

The quaternary organization of the cellulosome, a multi-enzymatic extracellular complex produced by cellulolytic bacteria, depends on specific interactions between dockerin domains, double EF-hand subunits carried by the catalytic components, and cohesin domains, individual receptor subunits linearly arranged within a non-catalytic scaffolding polypeptide. Cohesin-dockerin complexes with distinct specificities are also thought to mediate the attachment of cellulosomes to the cell membrane. We report here the crystal structure of a single cohesin domain from the scaffolding protein of Clostridium thermocellum. The cohesin domain folds into a nine-stranded beta-sandwich with an overall "jelly roll" topology, similar to that observed in bacterial cellulose-binding domains. Surface-exposed patches of conserved residues promote extensive intermolecular contacts in the crystal, and suggest a possible binding target for the EF-hand pair of the cognate dockerin domain. Comparative studies of cohesin domains indicate that, in spite of low sequence similarities and different functional roles, all cohesin domains share a common nine-stranded beta-barrel fold stabilized by a conserved hydrophobic core. The formation of stable cohesin-dockerin complexes requires the presence of Ca2+. However, the structure of the cohesin domain reported here reveals no obvious Ca2+-binding site, and previous experiments have failed to detect high affinity binding of Ca2+ to the unliganded dockerin domain of endoglucanase CelD. Based on structural and biochemical evidence, we propose a model of the cohesin-dockerin complex in which the dockerin domain requires complexation with its cohesin partner for protein stability and high-affinity Ca2+ binding.

Functions of S-layers

Although S-layers are being increasingly identified on Bacteria and Archaea, it is enigmatic that in most cases S-layer function continues to elude us. In a few instances, S-layers have been shown to be virulence factors on pathogens (e.g. Campylobacter fetus ssp. fetus and Aeromonas salmonicida), protective against Bdellovibrio, a depository for surface-exposed enzymes (e.g. Bacillus stearothermophilus), shape-determining agents (e.g. Thermoproteus tenax) and nucleation factors for fine-grain mineral development (e.g. Synechococcus GL 24). Yet, for the vast majority of S-layered bacteria, the natural function of these crystalline arrays continues to be evasive. The following review up-dates the functional basis of S-layers and describes such diverse topics as the effect of S-layers on the Gram stain, bacteriophage adsorption in lactobacilli, phagocytosis by human polymorphonuclear leukocytes, the adhesion of a high-molecular-mass amylase, outer membrane porosity, and the secretion of extracellular enzymes of Thermoanaerobacterium. In addition, the functional aspect of calcium on the Caulobacter S-layer is explained.

Characterization and subcellular localization of the Clostridium thermocellum scaffoldin dockerin binding protein SdbA

This article reports the characterization of the Clostridium thermocellum SdbA protein thought to anchor the cellulosome to the bacterial cell surface. The NH2-terminal region of SdbA consists of a cohesin domain which specifically binds the dockerin domain of the cellulosomal scaffolding protein CipA. The COOH-terminal region consists of a triplicated segment, termed SLH repeats, which is present in the sequence of many bacterial cell surface polypeptides. The binding parameters of the interaction between the dockerin domain of CipA and the cohesin domain of SdbA were studied by using, as a probe, the chimeric polypeptide CelC-DSCipA, which carries the dockerin domain of CipA fused to endoglucanase CelC. In the presence of Ca2+, CelC-DSCipA bound to SdbA with an affinity constant of 1.26 x 10(7) M(-1). Binding of CelC-DSCipA to SdbA as a function of Ca2+ concentration was sigmoidal, corresponding to a Hill coefficient of 2 and an affinity constant for Ca2+ of 4 x 10(6) M(-2). This suggested the presence of two cooperatively bound Ca2+ ions in the cohesin-dockerin complex. Immunoblotting of C. thermocellum subcellular fractions and electron microscopy of immunocytochemically labeled cells indicated that SdbA is located on the cell surface and is a component of the cellulosome. Together, the data confirm that SdbA could mediate anchoring of the cellulosome to the surface of C. thermocellum cells by interacting with the dockerin domain of CipA.