Heterotrophic cultivation of Auxenochlorella protothecoides using forest biomass as a feedstock for sustainable biodiesel production

Nannochloropsis Lipids and Polyunsaturated Fatty Acids: Potential Applications and Strain Improvement

The genus Nannochloropsis comprises a group of oleaginous microalgae that accumulate polyunsaturated fatty acids (PUFAs), especially eicosapentaenoic acid (EPA). These molecules are essential for the correct development and health of humans and animals. Thanks to their attractive lipid profile, Nannochloropsis is mainly marketed as a feed ingredient in aquaculture. In microalgae of this genus, contents and cellular location of PUFAs are affected by the growth conditions and gene expression. Strain improvement through non-recombinant approaches can generate more productive strains and efficient bioprocesses for PUFA production. Nevertheless, the lack of specific markers, detection methods, and selective pressure for isolating such mutants remains a bottleneck in classical mutagenesis approaches or lipid quality assessment during cultivation. This review encompasses the importance of PUFAs and lipid classes from Nannochloropsis species and their potential applications. Additionally, a revision of the different ways to increase PUFA content in Nannochloropsis sp. by using classical mutagenesis and adaptive laboratory evolution is also presented, as well as various methods to label and quantify lipids and PUFAs from Nannochloropsis microalgae.

Benchmarking commercially available value-added fractions with potential for production via microalgae-based biorefineries: is it worth it?

The urgent need to mitigate climate change requires finding sustainable and efficient alternatives to fossil fuel-based materials. Biosequestration by microalgae has been suggested as a potential method for climate change mitigation due to its environmentally friendly nature and ability to produce high-value compounds. However, the large-scale application of microalgal biorefineries faces significant challenges, particularly in the harvest and processing stages, which are often costly and energy-intensive. This study aims to benchmark value-added fractions that can be produced via microalgae-based biorefineries against their commercially available counterparts. A systematic review was conducted using the Web of Science™ database to identify current commercial sources of proteins, lipids, polyunsaturated fatty acids and pigments, this study identified key sectors and applications for each fraction, as well as potential market competitors. The results highlight substantial cost differences across production systems, with traditional agricultural sources demonstrating lower CAPEX but greater environmental challenges. Meanwhile, microalgal systems, although associated with higher CAPEX, offer advantages such as reduced land and water dependency, potentially leading to long-term economic resilience and environmental sustainability. By pinpointing research trends, key sectors and optimization opportunities, this work offers valuable insights into the profitability and competitiveness of microalgal systems, providing a benchmark for future optimization efforts. The novelty of this research lies in its comprehensive comparison of microalgae-based and traditional production systems, establishing a clear benchmark for microalgal production and suggesting focus areas for enhancement.

Organosolv-derived lipids from hemicellulose and cellulose, and pre-extracted tannins as additives upon hydrothermal liquefaction (HTL) of spruce bark lignins to bio-oil

The rise in global temperature and accumulation of petroleum-based wastes in the environment forces the scientific focus towards renewable alternatives. In the present work, an under-exploited resource - spruce bark - is investigated as a raw material for production of bio-oil as a liquid energy carrier. To enhance the energy-content of the produced bio-crude, ultimately being produced through hydrothermal liquefaction, the polysaccharides were extracted through organosolv fractionation and converted to lipids by oleaginous microorganisms. The effect originating from tannins was also investigated by performing a pre-extraction before the organosolv fractionation. It was found that performing the organosolv fractionation and upgrading the isolated organosolv lignin to bio-oil greatly reduced the oxygen content of the oil fraction thereby improving its energy content, and introducing upgraded polysaccharides in the form of lipids, as well as pre-extracted tannins, caused clear changes in the product distribution of the final bio-oil and kept a final product with low oxygen content. The other factor largely influencing the product distribution originated from the various heating rates tested by altering operational mode of the HTL process between batch and semi-continuous. Ultimately, performing the organosolv fractionation and individual upgrading of the polysaccharides had a beneficial effect on reducing the final solids content and enhancing the liquid oil yield.

Potential of Lipid Biosynthesis under Heterotrophy in the Marine Diatom Cyclotella cryptica

Despite the theoretical high productivity, microalgae-based oil production is not economically sustainable due to the high cost of photoautotrophic cultures. Heterotrophic growth is a suitable economic alternative to overcoming light dependence and climatic/geographic fluctuations. Here we report data about growth performance, biomass production, and lipid composition of the marine diatom Cyclotella cryptica, chosen as a model strain for biodiesel production in heterothrophy. A repeated-batch process of heterotrophic cultivation has also been investigated to assess the robustness and phenotypic stability. The process consisting of six constant cycle repetitions was carried out for 42 days and led to an average dry biomass production of 1.5 ± 0.1 g L-1 of which 20% lipids composed of 60% triglycerides, 20% phospholipids. and 20% glycolipids. The major fatty acids were C16:0 (∼26%), C16:1 ω-7 (∼57%), and C20:5 ω-3 (∼12%), with a significant reduction in the unsaturated fatty acids in comparison to other microalgae grown in heterotrophy. Fatty acids were differently distributed among the glycerolipid classes, and the lipid composition was used to compare the potential properties of C. cryptica oil with traditional vegetable biofuels.

Optimization of Heterotrophic Culture Conditions for the Algae Graesiella emersonii WBG-1 to Produce Proteins

The aim of this study was to improve the protein content and yield of heterotrophic microalgal cultivation and establish a simple, economical, and efficient method for microalgal protein production using the novel green alga, Graesiella emersonii WBG-1, which has not been previously reported for heterotrophic cultivation. Through batch heterotrophic cultivation of this alga, we observed that glucose was the optimal carbon source, while it could not use sucrose as a carbon source. Biomass production and protein content were significantly reduced when sodium acetate was used as the carbon source. Compared with nitrate, protein content increased by 93% when urea was used as the nitrogen source. Cultivation temperature had a significant impact on biomass production and protein content. The optimal conditions were glucose as the carbon source at an initial concentration of 10 g/L, urea as the nitrogen source at an initial concentration of 1.62 g/L, and a culture temperature of 35 °C. On the second day of batch cultivation, the highest protein content (66.14%) was achieved, which was significantly higher than that reported in heterotrophic cultures of Chlorella and much higher than that reported for specially established technologies aimed at increasing the protein content, such as two-stage heterotrophic, heterotrophy-dilution-photoinduction, and mixotrophic processes. These results demonstrate the great potential of the heterotrophic cultivation of G. emersonii WBG-1 for protein production.

Microbial Lipid Based Biorefinery Concepts: A Review of Status and Prospects

The use of lignocellulosic biomass as a raw material for the production of lipids has gained increasing attention, especially in recent years when the use of food in the production of biofuels has become a current technology. Thus, the competition for raw materials for both uses has brought the need to create technological alternatives to reduce this competition that could generate a reduction in the volume of food offered and a consequent commercial increase in the value of food. Furthermore, the use of microbial oils has been studied in many industrial branches, from the generation of renewable energy to the obtainment of several value-added products in the pharmaceutical and food industries. Thus, this review provides an overview of the feasibility and challenges observed in the production of microbial lipids through the use of lignocellulosic biomass in a biorefinery. Topics covered include biorefining technology, the microbial oil market, oily microorganisms, mechanisms involved in lipid-producing microbial metabolism, strain development, processes, lignocellulosic lipids, technical drawbacks, and lipid recovery.

Optimizing heterotrophic production of Chlorella sorokiniana SU-9 proteins potentially used as a sustainable protein substitute in aquafeed

Alternative protein sources for the reduction/replacement of fish meal in aqua-feeds are in urgent demand. Microalgae are considered sustainable protein sources for aquaculture due to their high-quality proteins with a complete profile of essential amino acids. This study examined the heterotrophic production of proteins from Chlorella sorokiniana SU-9. Culture parameters for maximal biomass and protein production are as follows: glucose - 10 g/L glucose, sodium nitrate - 1.5 g/L, and iron - 46 μM iron in BG-11 medium. Under optimal conditions, biomass content, protein content and protein productivity of SU-9 reached 4.14 ± 0.20 g/L, 403 ± 33 mg/g and 382 ± 36 mg/L/d, respectively. The protein profile of Chlorella sorokiniana SU-9 is comparable to fishmeal and soybean meal. The essential amino acids arginine, lysine and cysteine, along with glutamine and glutamate, were high. The production cost of SU-9 can be significantly reduced under heterotrophic cultivation conditions, making it a potential protein substitute in aquafeed.

Modified Orange Peel Waste as a Sustainable Material for Adsorption of Contaminants

World orange production is estimated at 60 million tons per annum, while the annual production of orange peel waste is 32 million tons. According to available data, the adsorption capacity of orange peel ranges from 3 mg/g to 5 mg/g, while their water uptake is lower than 1 mg/g. The low water uptake of orange peel and the abundance of biomass in nature has made orange peel an excellent biosorption material. This review summarised different studies on orange peel adsorption of various contaminants to identify properties of orange peel that influence the adsorption of contaminants. Most of the literature reviewed studied orange peel adsorption of heavy metals, followed by studies on the adsorption of dyes, while few studies have investigated adsorption of oil by orange peel. FTIR spectra analysis and SEM micrographs of raw and activated orange peels were studied to understand the structural properties of the biomass responsible for adsorption. The study identified pectin, hydroxyl, carbonyl, carboxyl, and amine groups as components and important functional groups responsible for adsorption in orange peel. Furthermore, changes were observed in the structural properties of the peel after undergoing various modifications. Physical modification increased the surface area for binding and the adsorption of contaminants, while chemical treatments increased the carboxylic groups enhancing adsorption and the binding of contaminants. In addition, heating orange peel during the thermal modification process resulted in a highly porous structure and a subsequent increase in adsorption capacities. In conclusion, physical, chemical, and thermal treatments improve the structural properties of orange peel, resulting in high biosorption uptake. However, orange peels treated with chemicals recorded the highest contaminants adsorption capacities.

Heterotrophic Cultivation of the Cyanobacterium Pseudanabaena sp. on Forest Biomass Hydrolysates toward Sustainable Biodiesel Production

Environmental pollution, greenhouse gas emissions, depletion of fossil fuels, and a growing population have sparked a search for new and renewable energy sources such as biodiesel. The use of waste or residues as substrates for microbial growth can favor the implementation of a biorefinery concept with reduced environmental footprint. Cyanobacteria constitute microorganisms with enhanced ability to use industrial effluents, wastewaters, forest residues for growth, and concomitant production of added-value compounds. In this study, a recently isolated cyanobacterium strain of Pseudanabaena sp. was cultivated on hydrolysates from pretreated forest biomass (silver birch and Norway spruce), and the production of biodiesel-grade lipids was assessed. Optimizing carbon source concentration and the (C/N) carbon-to-nitrogen ratio resulted in 66.45% w/w lipid content when microalgae were grown on glucose, compared to 62.95% and 63.79% w/w when grown on spruce and birch hydrolysate, respectively. Importantly, the lipid profile was suitable for the production of high-quality biodiesel. The present study demonstrates how this new cyanobacterial strain could be used as a biofactory, converting residual resources into green biofuel.

Continuous Culture of Auxenochlorella protothecoides on Biodiesel Derived Glycerol under Mixotrophic and Heterotrophic Conditions: Growth Parameters and Biochemical Composition

As crude glycerol comprises a potential substrate for microalga fermentation and value added products’ biosynthesis, Auxenochlorella protothecoides was grown on it under heterotrophic and mixotrophic conditions and its growth kinetics were evaluated in a continuous system under steady state conditions. Increasing initial glycerol concentration (from 30 to 50 g/L) in the heterotrophic culture led to reduced biomass yield (Y_x/S) and productivity (P_x), but favored lipid accumulation. Under heterotrophic conditions, the microalga was found to grow better (biomass up to 7.888 g/L) and faster (higher growth rates), the system functioned more effectively (higher P_x) and crude glycerol was exploited more efficiently. Heterotrophy also favored proteins synthesis (up to 53%), lipids (up to 9.8%), and carbohydrates (up to 44.6%) accumulation. However, different trophic modes had no significant impact on the consistency of proteins and lipids. Oleic acid was the most abundant fatty acid detected (55–61.2% of the total lipids). The algal biomass contained many essential and non-essential amino acids, especially arginine, glutamic acid, lysine, aspartic acid, leucine, and alanine. In all the experimental trials, the protein contents in the microalgal biomass increased with the increasing dilution rate (D), with a concomitant decrease in the lipids and carbohydrates fractions.

Simulation and optimization of organosolv based lignocellulosic biomass refinery: A review

Organosolv pretreatment can be considered as the core of the lignocellulosic biomass fractionation within the biorefinery concept. Organosolv facilitates the separation of the major fractions (cellulose, hemicelluloses, lignin), and their use as renewable feedstocks to produce bioenergy, biofuels, and added-value biomass derived chemicals. The efficient separation of these fractions affects the economic feasibility of the biorefinery complex. This review focuses on the simulation of the organosolv pretreatment and the optimization of (i) feedstock delignification, (ii) sugars production (mainly from hemicelluloses), (iii) enzymatic digestibility of the cellulose fraction and (iv) quality of lignin. Simulation is used for the technoeconomic optimization of the biorefinery complex. Simulation and optimization implement a holistic approach considering the efficient technological, economic, and environmental performance of the biorefinery operational units. Consequently, an optimized organosolv stage is the first step for a sustainable, economically viable biorefinery complex in the concept of industrial ecology and zero waste circular economy.

Single-Cell Oils from Oleaginous Microorganisms as Green Bio-Lubricants: Studies on Their Tribological Performance

Biolubricants refer to eco-friendly, biodegradable, and non-toxic lubricants. Their applications are still limited compared to mineral oils; however, their sustainable credentials are making them increasingly attractive. Vegetable oils are frequently used for this purpose. However, vegetable oils have issues of low lipid productivity, dependence on climatic conditions, and need for agricultural land. Microbial oils represent a more sustainable alternative. To ensure their widespread applicability, the suitability of microbial oils from a physicochemical point of view needs to be determined first. In this study, oils obtained from various oleagenic microbes—such as microalgae, thraustochytrids, and yeasts—were characterized in terms of their fatty acid profile, viscosity, friction coefficient, wear, and thermal stability. Oleaginous microalgal strains (Auxenochlorella protothecoides and Chlorella sorokiniana), thraustochytrids strains (Aurantiochytrium limacinum SR21 and Aurantiochytrium sp. T66), and yeast strains (Rhodosporidium toruloides and Cryptococcus curvatus) synthesized 64.5%, 35.15%, 47.89%, 47.93%, 56.42%, and 52.66% of lipid content, respectively. Oils from oleaginous microalgae (A. protothecoides and C. sorokiniana) and yeasts (R. toruloides and C. curvatus) possess excellent physicochemical and tribological qualities due to high amount of monounsaturated fatty acids (oleic acid C18:1 content, 56.38%, 58.82%, 46.67%, 38.81%) than those from oleaginous thraustochytrids (A. limacinum SR21 and Aurantiochytrium sp. T66; 0.96%, 0.08%, respectively) supporting their use as renewable and biodegradable alternatives to traditional mineral oil-based lubricants. Oil obtained from microalgae showed a lower friction coefficient than oils obtained from yeasts and thraustochytrids.

Biodiesel Production From Lignocellulosic Biomass Using Oleaginous Microbes: Prospects for Integrated Biofuel Production

Biodiesel is an eco-friendly, renewable, and potential liquid biofuel mitigating greenhouse gas emissions. Biodiesel has been produced initially from vegetable oils, non-edible oils, and waste oils. However, these feedstocks have several disadvantages such as requirement of land and labor and remain expensive. Similarly, in reference to waste oils, the feedstock content is succinct in supply and unable to meet the demand. Recent studies demonstrated utilization of lignocellulosic substrates for biodiesel production using oleaginous microorganisms. These microbes accumulate higher lipid content under stress conditions, whose lipid composition is similar to vegetable oils. In this paper, feedstocks used for biodiesel production such as vegetable oils, non-edible oils, oleaginous microalgae, fungi, yeast, and bacteria have been illustrated. Thereafter, steps enumerated in biodiesel production from lignocellulosic substrates through pretreatment, saccharification and oleaginous microbe-mediated fermentation, lipid extraction, transesterification, and purification of biodiesel are discussed. Besides, the importance of metabolic engineering in ensuring biofuels and biorefinery and a brief note on integration of liquid biofuels have been included that have significant importance in terms of circular economy aspects.

Volatile Fatty Acids (VFAs) Generated by Anaerobic Digestion Serve as Feedstock for Freshwater and Marine Oleaginous Microorganisms to Produce Biodiesel and Added-Value Compounds

Given an increasing focus on environmental sustainability, microbial oils have been suggested as an alternative to petroleum-based products. However, microbial oil production relies on the use of costly sugar-based feedstocks. Substrate limitation, elevated costs, and risk of contamination have sparked the search for alternatives to sugar-based platforms. Volatile fatty acids are generated during anaerobic digestion of organic waste and are considered a promising substrate for microbial oil production. In the present study, two freshwater and one marine microalga along with two thraustochytrids were evaluated for their potential to produce lipids when cultivated on volatile fatty acids generated from food waste via anaerobic digestion using a membrane bioreactor. Freshwater microalgae Auxenochlorella protothecoides and Chlorella sorokiniana synthesized lipids rich in palmitic acid (C16:0), stearic acid (C18:0), oleic acid (C18:1), and linoleic acid (C18:2). This composition corresponds to that of soybean and jatropha oils, which are used as biodiesel feedstock. Production of added-value polyunsaturated fatty acids (PUFA) mainly omega-3 fatty acids was examined in three different marine strains: Aurantiochytrium sp. T66, Schizochytrium limacinum SR21, and Crypthecodinium cohnii. Only Aurantiochytrium sp. T66 seemed promising, generating 43.19% docosahexaenoic acid (DHA) and 13.56% docosapentaenoic acid (DPA) in total lipids. In summary, we show that A. protothecoides, C. sorokiniana, and Aurantiochytrium sp. T66 can be used for microbial oil production from food waste material.

Valorization of volatile fatty acids derived from low-cost organic waste for lipogenesis in oleaginous microorganisms-A review

To meet environmental sustainability goals, microbial oils have been suggested as an alternative to petroleum-based products. At present, microbial fermentation for oil production relies on pure sugar-based feedstocks. However, these feedstocks are expensive and are in limited supply. Volatile fatty acids, which are generated as intermediates during anaerobic digestion of organic waste have emerged as a renewable feedstock that has the potential to replace conventional sugar sources for microbial oil production. They comprise short-chain (C2 to C6) organic acids and are employed as building blocks in the chemical industry. The present review discusses the use of oleaginous microorganisms for the production of biofuels and added-value products starting from volatile fatty acids as feedstocks. The review describes the metabolic pathways enabling lipogenesis from volatile fatty acids, and focuses on strategies to enhance lipid accumulation in oleaginous microorganisms by tuning the ratios of volatile fatty acids generated via anaerobic fermentation.

AP2/ERF and R2R3-MYB family transcription factors: potential associations between temperature stress and lipid metabolism in Auxenochlorella protothecoides

BACKGROUND

Both APETALA2/Ethylene Responsive Factor (AP2/ERF) superfamily and R2R3-MYB family were from one of the largest diverse families of transcription factors (TFs) in plants, and played important roles in plant development and responses to various stresses. However, no systematic analysis of these TFs had been conducted in the green algae A. protothecoides heretofore. Temperature was a critical factor affecting growth and lipid metabolism of A. protothecoides. It also remained largely unknown whether these TFs would respond to temperature stress and be involved in controlling lipid metabolism process.

RESULTS

Hereby, a total of six AP2 TFs, six ERF TFs and six R2R3-MYB TFs were identified and their expression profiles were also analyzed under low-temperature (LT) and high-temperature (HT) stresses. Meanwhile, differential adjustments of lipid pathways were triggered, with enhanced triacylglycerol accumulation. A co-expression network was built between these 18 TFs and 32 lipid-metabolism-related genes, suggesting intrinsic associations between TFs and the regulatory mechanism of lipid metabolism.

CONCLUSIONS

This study represented an important first step towards identifying functions and roles of AP2 superfamily and R2R3-MYB family in lipid adjustments and response to temperature stress. These findings would facilitate the biotechnological development in microalgae-based biofuel production and the better understanding of photosynthetic organisms' adaptive mechanism to temperature stress.

Biomass, lipid accumulation kinetics, and the transcriptome of heterotrophic oleaginous microalga Tetradesmus bernardii under different carbon and nitrogen sources

BACKGROUND

Heterotrophic cultivation of microalgae has been proposed as a viable alternative method for novel high-value biomolecules, enriched biomass, and biofuel production because of their allowance of high cell density levels, as well as simple production technology. Tetradesmus bernardii, a newly isolated high-yielding oleaginous microalga under photoautotrophic conditions, is able to grow heterotrophically, meaning that it can consume organic carbon sources in dark condition. We investigated the effect of different carbon/nitrogen (C/N) ratios on the growth and lipid accumulation of T. bernardii in heterotrophic batch culture under two nitrogen sources (NaNO₃ and CO(NH₂)₂). In addition, we conducted time-resolved transcriptome analysis to reveal the metabolic mechanism of T. bernardii in heterotrophic culture.

RESULTS

T. bernardii can accumulate high biomass concentrations in heterotrophic batch culture where the highest biomass of 46.09 g/L was achieved at 100 g/L glucose concentration. The rate of glucose to biomass exceeded 55% when the glucose concentration was less than 80 g/L, and the C/N ratio was 44 at urea treatment. The culture was beneficial to lipid accumulation at a C/N ratio between 110 and 130. NaNO₃ used as a nitrogen source enhanced the lipid content more than urea, and the highest lipid content was 45% of dry weight. We performed RNA-seq to analyze the time-resolved transcriptome of T. bernardii. As the nitrogen was consumed in the medium, nitrogen metabolism-related genes were significantly up-regulated to speed up the N metabolic cycle. As chloroplasts were destroyed in the dark, the metabolism of cells was transferred from chloroplasts to cytoplasm. However, storage of carbohydrate in chloroplast remained active, mainly the synthesis of starch, and the precursor of starch synthesis in heterotrophic culture may largely come from the absorption of organic carbon source (glucose). With regard to lipid metabolism, the related genes of fatty acid synthesis in low nitrogen concentration increased gradually with the extension of cultivation time.

CONCLUSION

T. bernardii exhibited rapid growth and high lipid accumulation in heterotrophic culture. It may be a potential candidate for biomass and biofuel production. Transcriptome analysis showed that multilevel regulation ensured the conversion from carbon to the synthesis of carbohydrate and lipid.

Lignocellulosic Biomass as a Substrate for Oleaginous Microorganisms: A Review

Microorganisms capable of accumulating lipids in high percentages, known as oleaginous microorganisms, have been widely studied as an alternative for producing oleochemicals and biofuels. Microbial lipid, so-called Single Cell Oil (SCO), production depends on several growth parameters, including the nature of the carbon substrate, which must be efficiently taken up and converted into storage lipid. On the other hand, substrates considered for large scale applications must be abundant and of low acquisition cost. Among others, lignocellulosic biomass is a promising renewable substrate containing high percentages of assimilable sugars (hexoses and pentoses). However, it is also highly recalcitrant, and therefore it requires specific pretreatments in order to release its assimilable components. The main drawback of lignocellulose pretreatment is the generation of several by-products that can inhibit the microbial metabolism. In this review, we discuss the main aspects related to the cultivation of oleaginous microorganisms using lignocellulosic biomass as substrate, hoping to contribute to the development of a sustainable process for SCO production in the near future.

Enhancement of Lipid Production under Heterotrophic Conditions by Overexpression of an Endogenous bZIP Transcription Factor in Chlorella sp. HS2

Transcription factor engineering to regulate multiple genes has shown promise in the field of microalgae genetic engineering. Here, we report the first use of transcription factor engineering in Chlorella sp. HS2, thought to have potential for producing biofuels and bioproducts. We identified seven endogenous bZIP transcription factors in Chlorella sp. HS2 and named them HSbZIP1 through HSbZIP7. We overexpressed HSbZIP1, a C-type bZIP transcription factor, in Chlorella sp. HS2 with the goal of enhancing lipid production. Phenotype screening under heterotrophic conditions showed that all transformants exhibited increased fatty acid production. In particular, HSbZIP1 37 and 58 showed fatty acid methyl ester (FAME) yields of 859 and 1,052 mg/l, respectively, at day 10 of growth under heterotrophic conditions, and these yields were 74% and 113% higher, respectively, than that of WT. To elucidate the mechanism underlying the improved phenotypes, we identified candidate HSbZIP1-regulated genes via transcription factor binding site analysis. We then selected three genes involved in fatty acid synthesis and investigated mRNA expression levels of the genes by qRTPCR. The result revealed that the possible HSbZIP1-regulated genes involved in fatty acid synthesis were upregulated in the HSbZIP1 transformants. Taken together, our results demonstrate that HSbZIP1 can be utilized to improve lipid production in Chlorella sp. HS2 under heterotrophic conditions.

Recovery of High Purity Lignin and Digestible Cellulose from Oil Palm Empty Fruit Bunch Using Low Acid-Catalyzed Organosolv Pretreatment

The lignocellulosic residue from the palm oil industry, oil palm empty fruit bunch (OPEFB), represents a challenge to both producing industries and environment due to its disposal difficulties. Alternatively, OPEFB can be used for the production of valuable products if pretreatment methods, which overcome OPEFB recalcitrance and allow tailored valorization of all its carbohydrates and lignin, are developed. Specifically, high-value applications for lignin, to increase its contribution to the feasibility of lignocellulosic biorefineries, demand high-purity fractions. In this study, acid-catalyzed organosolv using ethanol as a solvent was used for the recovery of high-purity lignin and digestible cellulose. Factors including catalyst type and its concentration, temperature, retention time, and solid-to-liquid (S/L) ratio were found to influence lignin purity and recovery. At the best conditions (0.07% H2SO4, 210 °C, 90 min, and S/L ratio of 1:10), a lignin purity and recovery of 70.6 ± 4.9% and 64.94 ± 1.09%, respectively, were obtained in addition to the glucan-rich fraction. The glucan-rich fraction showed 94.06 ± 4.71% digestibility within 18 h at an enzyme loading of 30 filter paper units (FPU) /g glucan. Therefore, ethanol organosolv can be used for fractionating OPEFB into three high-quality fractions (glucan, lignin, and hemicellulosic compounds) for further tailored biorefining using low acid concentrations. Especially, the use of ethanol opens the possibility for integration of 1st and 2nd generation ethanol benefiting from the separation of high-purity lignin.

Assessment of Fatty Acids Profile and Omega-3 Polyunsaturated Fatty Acid Production by the Oleaginous Marine Thraustochytrid Aurantiochytrium sp. T66 Cultivated on Volatile Fatty Acids

Thraustochytrids are considered natural producers of omega-3 fatty acids as they can synthesize up to 70% docosahexaenoic acids (DHA) of total lipids. However, commercial and sustainable production of microbial DHA is limited by elevated cost of carbon substrates for thraustochytrids cultivation. This problem can be addressed by utilizing low-cost renewable substrates. In the present study, growth, lipid accumulation and fatty acid profiles of the marine thraustochytrid Aurantiochytrium sp. T66 (ATCC-PRA-276) cultivated on volatile fatty acids (C1, formic acid; C2, acetic acid; C3, propionic acid; C4, butyric acid; C5, valeric acid and C6, caproic acid) and glucose as control were evaluated for the first time. This strain showed an inability to utilize C3, C5 and C6 as a substrate when provided at >2 g/L, while efficiently utilizing C2 and C4 up to 40 g/L. The highest cell dry weight (12.35 g/L) and total lipid concentration (6.59 g/L) were attained when this strain was cultivated on 40 g/L of butyric acid, followed by cultivation on glucose (11.87 g/L and 5.34 g/L, respectively) and acetic acid (8.70 g/L and 3.43 g/L, respectively). With 40 g/L butyric acid, the maximum docosahexaenoic acid content was 2.81 g/L, corresponding to 42.63% w/w of total lipids and a yield of 0.23 g/g_{cell dry weight (CDW)}. This marine oleaginous microorganism showed an elevated potential for polyunsaturated fatty acids production at higher acetic and butyric acid concentrations than previously reported. Moreover, fluorescence microscopy revealed that growth on butyric acid caused cell size to increase to 45 µm, one of the largest values reported for oleaginous microorganisms, as well as the presence of numerous tiny lipid droplets.

Enigmatic Microalgae from Aeroterrestrial and Extreme Habitats in Cosmetics: The Potential of the Untapped Natural Sources

With the increasing demand for natural and safe products in cosmetics, algae with their diverse and valuable bioactive compounds are gaining vital importance. Until now, cosmetics have focused mainly on the use of freshwater and marine algae. However, algae are not restricted to aquatic habitats. They are found in essentially every type of aeroterrestrial and extreme environment on the Earth. There, they have to cope with harsh ecological conditions and have developed special strategies to thrive in these inimical habitats. Although not thoroughly studied, their adaptations include protective biochemical compounds which can find their application or are already used in the field of cosmetics. With proper cultivation techniques, algae from these habitats can provide novel sources of high-value functional products for the cosmetics industry, which have the advantage of being obtained in eco-friendly and cost-effective processes. However, it has to be considered that a few aeroterrestrial and extremophilic algae can be toxin producers, and in order to ensure conformity to the safe quality standards, all new ingredients must be properly tested. The aim of the present review is to unveil the hidden and underestimated potential of the enigmatic algae of aeroterrestrial and extreme habitats for the rapidly developing modern cosmetic industries.

Biorefining Oat Husks into High-Quality Lignin and Enzymatically Digestible Cellulose with Acid-Catalyzed Ethanol Organosolv Pretreatment

Oat husks are low-value lignocellulosic residues of oat processing that carry an environmental impact. Their polymers (cellulose, hemicellulose, and lignin) can be converted into a wide variety of value-added products; however, efficient pretreatment methods are needed that allow their fine separation for further tailored valorization. This study pioneered the use of milling-free and low acid-catalyzed ethanol organosolv for the delignification of oat husks, allowing their conversion into three high-quality streams, namely, glucan-rich, lignin-rich, and hemicellulosic compound-rich streams. Temperature, retention time, and solid-to-liquid ratio were found to impact the delignification of oat husks when using a one-factor-at-a-time strategy. The ideal conditions that were found (210 °C, 90 min, and solid-to-liquid ratio of 1:2) culminated into glucan and lignin fractions containing 74.5% ± 11.4% glucan and 74.9% ± 7.6% lignin, respectively. These high-purity lignin fractions open the possibility for higher value applications by lignin, potentially impacting the feasibility of second generation biorefineries. The glucan fraction showed 90% digestibility after 48 h of hydrolysis with 10 filter paper units of enzyme cocktail per gram of glucan. Considering the absence of size reduction and high solid loading, together with the quality of the obtained streams, organosolv pretreatment could be a potential strategy for the valorization of oat lignocellulosic residues.

An Overview of Potential Oleaginous Microorganisms and Their Role in Biodiesel and Omega-3 Fatty Acid-Based Industries

Microorganisms are known to be natural oil producers in their cellular compartments. Microorganisms that accumulate more than 20% w/w of lipids on a cell dry weight basis are considered as oleaginous microorganisms. These are capable of synthesizing vast majority of fatty acids from short hydrocarbonated chain (C6) to long hydrocarbonated chain (C36), which may be saturated (SFA), monounsaturated (MUFA), or polyunsaturated fatty acids (PUFA), depending on the presence and number of double bonds in hydrocarbonated chains. Depending on the fatty acid profile, the oils obtained from oleaginous microorganisms are utilized as feedstock for either biodiesel production or as nutraceuticals. Mainly microalgae, bacteria, and yeasts are involved in the production of biodiesel, whereas thraustochytrids, fungi, and some of the microalgae are well known to be producers of very long-chain PUFA (omega-3 fatty acids). In this review article, the type of oleaginous microorganisms and their expertise in the field of biodiesel or omega-3 fatty acids, advances in metabolic engineering tools for enhanced lipid accumulation, upstream and downstream processing of lipids, including purification of biodiesel and concentration of omega-3 fatty acids are reviewed.

Improving the economy of lignocellulose-based biorefineries with organosolv pretreatment

Lignocellulose-based processes for production of value-added products still face bottlenecks to attain feasibility. The key might lie on the biorefining of all lignocellulose main polymers, that is, cellulose, hemicellulose and lignin. Lignin, considered an impediment in the access of cellulose and normally considered for energy recovery purposes, can give a higher contribution towards profitability of lignocellulosic biorefineries. Organosolv pretreatment allows selective fractionation of lignocellulose into separate cellulose-, hemicellulose- and lignin-rich streams. Ethanol organosolv and wood substrates dominated the research studies, while a wide range of substrates need definition on the most suitable organosolv pretreatment systems. Techno-economic and environmental analyses of organosolv-based processes as well as proper valorization strategies of the hemicellulose-rich fraction are still scarce. In view of dominance of ethanol organosolv with high delignification yields and high-purity of the recovered cellulose-rich fractions, close R & D collaboration with 1st generation ethanol plants might boost commercialization.

Co-production of DHA and squalene by thraustochytrid from forest biomass

Omega-3 fatty acids, and specifically docosahexaenoic acid (DHA), are important and essential nutrients for human health. Thraustochytrids are recognised as commercial strains for nutraceuticals production, they are group of marine oleaginous microorganisms capable of co-synthesis of DHA and other valuable carotenoids in their cellular compartment. The present study sought to optimize DHA and squalene production by the thraustochytrid Schizochytrium limacinum SR21. The highest biomass yield (0.46 g/g_substrate) and lipid productivity (0.239 g/g_substrate) were observed with 60 g/L of glucose, following cultivation in a bioreactor, with the DHA content to be 67.76% w/w_{total lipids}. To reduce costs, cheaper feedstocks and simultaneous production of various value-added products for pharmaceutical or energy use should be attempted. To this end, we replaced pure glucose with organosolv-pretreated spruce hydrolysate and assessed the simultaneous production of DHA and squalene from S. limacinum SR21. After the 72 h of cultivation period in bioreactor, the maximum DHA content was observed to 66.72% w/w_{total lipids} that was corresponded to 10.15 g/L of DHA concentration. While the highest DHA productivity was 3.38 ± 0.27 g/L/d and squalene reached a total of 933.72 ± 6.53 mg/L (16.34 ± 1.81 mg/g_CDW). In summary, we show that the co-production of DHA and squalene makes S. limacinum SR21 appropriate strain for commercial-scale production of nutraceuticals.

The Dark Side of Microalgae Biotechnology: A Heterotrophic Biorefinery Platform Directed to ω-3 Rich Lipid Production

Microbial oils have been considered a renewable feedstock for bioenergy not competing with food crops for arable land, freshwater and biodiverse natural landscapes. Microalgal oils may also have other purposes (niche markets) besides biofuels production such as pharmaceutical, nutraceutical, cosmetic and food industries. The polyunsaturated fatty acids (PUFAs) obtained from oleaginous microalgae show benefits over other PUFAs sources such as fish oils, being odorless, and non-dependent on fish stocks. Heterotrophic microalgae can use low-cost substrates such as organic wastes/residues containing carbon, simultaneously producing PUFAs together with other lipids that can be further converted into bioenergy, for combined heat and power (CHP), or liquid biofuels, to be integrated in the transportation system. This review analyses the different strategies that have been recently used to cultivate and further process heterotrophic microalgae for lipids, with emphasis on omega-3 rich compounds. It also highlights the importance of studying an integrated process approach based on the use of low-cost substrates associated to the microalgal biomass biorefinery, identifying the best sustainability methodology to be applied to the whole integrated system.

Sustainable biorefinery concept for biofuel production through holistic volarization of food waste

The aim of this study was to utilize the whole food waste in two stages. In the first stage, the carbohydrate and protein fractions of food waste recovered after enzymatic hydrolysis was used to cultivate heterotrophic microalgae, resulting in biomass yield of 0.346 ± 0.09 g/g_sugars and lipid yield of 0.216 ± 0.06 g/g_sugars. In the second stage, oil (14.15% w/w) was extracted from food waste after hydrolysis and converted to biodiesel by a two-step transesterification reaction that generated 135.8 g/kg_{food waste} of fatty acid methyl esters and 13.8 g/kg_{food waste} of crude glycerol. Finally, crude glycerol obtained from both processes was used at 20 g/L to cultivate heterotrophic microalgae, resulting in a cell dry weight and total lipid concentration of 6.23 g/L and 2.91 g/L, respectively. A total 248.21 g of fatty acid methyl esters were obtained from the 1 kg of food waste through this integrated process.

Simultaneous production of DHA and squalene from Aurantiochytrium sp. grown on forest biomass hydrolysates

BACKGROUND

Recent evidence points to the nutritional importance of docosahexaenoic acid (DHA) in the human diet. Thraustochytrids are heterotrophic marine oleaginous microorganisms capable of synthesizing high amounts of DHA, as well as other nutraceutical compounds such as squalene, in their cellular compartment. Squalene is a natural triterpene and an important biosynthetic precursor to all human steroids. It has a wide range of applications in the cosmetic and pharmaceutical industries, with benefits that include boosting immunity and antioxidant activity. Apart from its nutritional quality, it can also be utilized for high-grade bio-jet fuel by catalytic conversion.

RESULTS

In the present study, the potential of thraustochytrid strain Aurantiochytrium sp. T66 to produce DHA and squalene was evaluated. When the strain was cultivated on organosolv-pretreated birch hydrolysate (30 g/L glucose) in flask, it resulted in 10.39 g/L of cell dry weight and 4.98 g/L of total lipids, of which 25.98% was DHA. In contrast, when the strain was grown in a bioreactor, cell dry weight, total lipid, and DHA increased to 11.24 g/L, 5.90 g/L, and 35.76%, respectively. The maximum squalene yield was 69.31 mg/gCDW (0.72 g/L) when the strain was cultivated in flask, but it increased to 88.47 mg/gCDW (1.0 g/L), when cultivation shifted to a bioreactor.

CONCLUSIONS

This is the first report demonstrating the utilization of low cost non-edible lignocellulosic feedstock to cultivate the marine oleaginous microorganism Aurantiochytrium sp. for the production of nutraceutical vital compounds. Owing to the simultaneous generation of DHA and squalene, the strain is suitable for industrial-scale production of nutraceuticals.

Agricultural waste

The management of agricultural waste has become very important because the inappropriate disposal yields negative effects on the environment. The resource recovery from agricultural waste which converts waste into available resources can reduce the waste and new resource consumption. This review summarizes the 2018 researches of over three hundred scholar papers from several aspects: agricultural waste, and, waste chemical characterization, agricultural waste material, adsorption, waste energy, composting, waste biogas, agricultural waste management, and others.

Bioenergy from biofuel residues and waste

This section presents a review of the scientific literature published in 2018 on topics relating to sustainable bioenergy from biofuel residues and waste. This review is divided into the following sections: Feedstocks, Bioethanol, Biodiesel, Biohydrogen, Hydrogen, Biofuel Residues, Microalgae, and Lignocelluloses.

Cultivation of Chlorella protothecoides under different growth modes and its utilisation in oil/water emulsions

Microalgae can be incorporated in different bio-based products; however, the green colour is a barrier for a successful integration. This study aims to overcome this barrier by growing microalgae in different cultivation modes. Mixotrophic cultivation of Chlorella protothecoides resulted in the highest biomass production after 5 days (5.56 ± 0.09 g/L), followed by heterotrophic and photoautotrophic cultivation (4.33 ± 0.15 and 1.80 ± 0.05 g/L, respectively). Mixotrophically and heterotrophically produced biomass presented a reduced greenish colouration compared to photoautotrophically produced biomass. Chlorophyll content resulted in 1.46 ± 0.21 and 0.95 ± 0.28 mg/g dry weight (DW) in mixotrophic and heterotrophic cultures, respectively, and 25.98 ± 1.28 mg/g DW in photoautotrophic cultures. In contrast, the fraction of carotenoids in the total pigments was much higher. With the whole microalgae fractions after cell disruption as ingredients, stable emulsions containing 50% oil could be produced. No syneresis with serum separation was observed 24 h after preparation.

Utilization of Clarified Butter Sediment Waste as a Feedstock for Cost-Effective Production of Biodiesel

The rising demand and cost of fossil fuels (diesel and gasoline), together with the need for sustainable, alternative, and renewable energy sources have increased the interest for biomass-based fuels such as biodiesel. Among renewable sources of biofuels, biodiesel is particularly attractive as it can be used in conventional diesel engines without any modification. Oleaginous yeasts are excellent oil producers that can grow easily on various types of hydrophilic and hydrophobic waste streams that are used as feedstock for single cell oils and subsequently biodiesel production. In this study, cultivation of Rhodosporidium kratochvilovae on a hydrophobic waste (clarified butter sediment waste medium (CBM)) resulted in considerably high lipid accumulation (70.74% w/w). Maximum cell dry weight and total lipid production were 15.52 g/L and 10.98 g/L, respectively, following cultivation in CBM for 144 h. Neutral lipids were found to accumulate in the lipid bodies of cells, as visualized by BODIPY staining and fluorescence microscopy. Cells grown in CBM showed large and dispersed lipid droplets in the intracellular compartment. The fatty acid profile of biodiesel obtained after transesterification was analyzed by gas chromatography-mass spectrometry (GC–MS), while its quality was determined to comply with ASTM 6751 and EN 14214 international standards. Hence, clarified sediment waste can be exploited as a cost-effective renewable feedstock for biodiesel production.

A comparative study on de novo and ex novo lipid fermentation by oleaginous yeast using glucose and sonicated waste cooking oil

There are only a few reports available about the assimilation of hydrophobic substrates by microorganisms, however, it is well known that oleaginous microorganisms are capable of utilizing both hydrophilic and hydrophobic substrates and accumulate lipids via two different pathways namely de novo and ex novo lipid synthesis, respectively. In the present study, an oleaginous yeast, Cryptococcus curvatus, was investigated for its potentials to utilize a waste substrate of hydrophobic nature (waste cooking oil - WCO) and compared with its ability to utilize a hydrophilic carbon source (glucose). To facilitate the utilization of WCO by C. curvatus, the broth was sonicated to form a stable oil-in-water emulsion without adding any emulsifier, which was then compared with WCO samples without any ultrasound treatment (unsonicated) for the yeast cultivation. Ultrasonication reduces the size of hydrophobic substrates and improves their miscibility in an aqueous broth making them easily assimilated by oleaginous yeast. Under de novo lipid fermentation, the yeast synthesized 9.93 ± 0.84 g/L of cell dry weight and 5.23 ± 0.49 g/L lipids (lipid content of 52.66 ± 0.93% w/w) when cultivated on 40 g/L of glucose (C/N ratio of 40). The amount of cell dry weight, lipid concentration, and lipid content were considerably higher during the ex novo lipid synthesis. More specifically, the highest lipid content achieved was 70.13 ± 1.65% w/w with a corresponding dry cell weight and lipid concentration of 18.62 ± 0.76 g/L and 13.06 ± 0.92 g/L respectively, when grown on 20 g/L sonicated WCO. The highest lipid concentration, however, was observed when the yeast was cultivated on 40 g/L sonicated WCO. Under these conditions, 20.34 g/L lipids were produced with a lipid content of 57.05% w/w. On the other hand, lipid production with unsonicated WCO was significant lower, reaching 11.16 ± 1.02 g/L (69.14 ± 1.34% w/w of lipid content) and 12.21 ± 1.34 g/L (47.39 ± 1.67% w/w of lipid content) for 20 g/L and 40 g/L of WCO, respectively. This underpins the significance of the sonication treatment, especially at elevated WCO concentrations, to improve the accessibility of the yeast to the WCO. Sonication treatment that was used in this study assisted the utilization of WCO without the need to add emulsifiers, thus reducing the need for chemicals and in turn has a positive impact on the production costs. The microbial lipids produced presented a different fatty acid composition compared to the WCO, making them more suitable for biodiesel production as suggested by the theoretical estimation of the biodiesel properties.

Biosynthesis of Nutraceutical Fatty Acids by the Oleaginous Marine Microalgae Phaeodactylum tricornutum Utilizing Hydrolysates from Organosolv-Pretreated Birch and Spruce Biomass

Polyunsaturated fatty acids (PUFAs) are essential for human function, however they have to be provided through the diet. As their production from fish oil is environmentally unsustainable, there is demand for new sources of PUFAs. The aim of the present work was to establish the microalgal platform to produce nutraceutical-value PUFAs from forest biomass. To this end, the growth of Phaeodactylum tricornutum on birch and spruce hydrolysates was compared to autotrophic cultivation and glucose synthetic media. Total lipid generated by P. tricornutum grown mixotrophically on glucose, birch, and spruce hydrolysates was 1.21, 1.26, and 1.29 g/L, respectively. The highest eicosapentaenoic acid (EPA) production (256 mg/L) and productivity (19.69 mg/L/d) were observed on spruce hydrolysates. These values were considerably higher than those obtained from the cultivation without glucose (79.80 mg/L and 6.14 mg/L/d, respectively) and also from the photoautotrophic cultivation (26.86 mg/L and 2.44 mg/L/d, respectively). To the best of our knowledge, this is the first report describing the use of forest biomass as raw material for EPA and docosapentaenoic acid (DHA) production.

Microalgae Cultivation for the Biotransformation of Birch Wood Hydrolysate and Dairy Effluent

In order to investigate environmentally sustainable sources of organic carbon and nutrients, four Nordic green microalgal strains, Chlorella sorokiniana, Chlorella saccharophila, Chlorella vulgaris, and Coelastrella sp., were grown on a wood (Silver birch, Betula pendula) hydrolysate and dairy effluent mixture. The biomass and lipid production were analysed under mixotrophic, as well as two-stage mixotrophic/heterotrophic regimes. Of all of the species, Coelastrella sp. produced the most total lipids per dry weight (~40%) in the mixture of birch hydrolysate and dairy effluent without requiring nutrient (nitrogen, phosphorus, and potassium—NPK) supplementation. Overall, in the absence of NPK, the two-stage mixotrophic/heterotrophic cultivation enhanced the lipid concentration, but reduced the amount of biomass. Culturing microalgae in integrated waste streams under mixotrophic growth regimes is a promising approach for sustainable biofuel production, especially in regions with large seasonal variation in daylight, like northern Sweden. To the best of our knowledge, this is the first report of using a mixture of wood hydrolysate and dairy effluent for the growth and lipid production of microalgae in the literature.

Valorization of Brewers' Spent Grain for the Production of Lipids by Oleaginous Yeast

Brewers’ spent grain (BSG) accounts for 85% of the total amount of by-products generated by the brewing industries. BSG is a lignocellulosic biomass that is rich in proteins, lipids, minerals, and vitamins. In the present study, BSG was subjected to pretreatment by two different methods (microwave assisted alkaline pretreatment and organosolv) and was evaluated for the liberation of glucose and xylose during enzymatic saccharification trials. The highest amount of glucose (46.45 ± 1.43 g/L) and xylose (25.15 ± 1.36 g/L) were observed after enzymatic saccharification of the organosolv pretreated BSG. The glucose and xylose yield for the microwave assisted alkaline pretreated BSG were 34.86 ± 1.27 g/L and 16.54 ± 2.1 g/L, respectively. The hydrolysates from the organosolv pretreated BSG were used as substrate for the cultivation of the oleaginous yeast Rhodosporidium toruloides, aiming to produce microbial lipids. The yeast synthesized as high as 18.44 ± 0.96 g/L of cell dry weight and 10.41 ± 0.34 g/L lipids (lipid content of 56.45 ± 0.76%) when cultivated on BSG hydrolysate with a C/N ratio of 500. The cell dry weight, total lipid concentration and lipid content were higher compared to the results obtained when grown on synthetic media containing glucose, xylose or mixture of glucose and xylose. To the best of our knowledge, this is the first report using hydrolysates of organosolv pretreated BSG for the growth and lipid production of oleaginous yeast in literature. The lipid profile of this oleaginous yeast showed similar fatty acid contents to vegetable oils, which can result in good biodiesel properties of the produced biodiesel.