Bacterial biofilm under flow: First a physical struggle to stay, then a matter of breathing

Ultrasound-activated cilia for biofilm control in indwelling medical devices

Biofilm formation and encrustation are major issues in indwelling medical devices, such as urinary stents and catheters, as they lead to blockages and infections. Currently, to limit these effects, frequent replacements of these devices are necessary, resulting in a significant reduction in patients' quality of life and an increase in healthcare costs. To address these challenges, by leveraging recent advancements in robotics and microfluidic technologies, we envision a self-cleaning system for indwelling medical devices equipped with bioinspired ultrasound-activated cilia. These cilia could be regularly activated transcutaneously by ultrasound, generating steady streaming, which can be used to remove encrusted deposits. In this study, we tested the hypothesis that the generated streaming can efficiently remove encrustations and biofilm from surfaces. To this end, we developed a microfluidic model featuring ultrasound-activated cilia on its wall. We showed that upon ultrasound activation, the cilia generated intense, steady streaming, reaching fluid velocity up to 10 mm/s. In all our experiments, this mechanism was able to efficiently clean typical encrustation (calcium carbonate and oxalate) and biofilm found in urological devices. The generated shear forces released, broke apart, and flushed away encrusted deposits. These findings suggest a broad potential for ultrasound-activated cilia in the maintenance of various medical devices. Compared to existing methods, our approach could reduce the need for invasive procedures, potentially lowering infection risks and enhancing patient comfort.

Environmental transition navigates phenotype switching, affecting the virulence and multidrug-resistant profile of pathogenic Morganella morganii

The bacteria's ability to respond to environmental changes is critical for their survival. This allows them to form intricate communities, withstand stress, and initiate virulence responses in hosts during infection, a phenomenon known as phenotypic switching. In this study, we investigated the role of shaking conditions on phenotype switch in multidrug-resistant and pathogenic Morganella morganii both under in vitro and in vivo conditions. The results demonstrate that M. morganii grown in non-shaking conditions, possibly causing low fluid shear, developed floccules or cellular aggregates, and substantially increased biofilm formation. Meanwhile, the bacterium grown in shaking conditions was non-flocculated and produced less biofilm. This phenotype switch leads to a significant change in the protein secretome and multidrug resistance profile. In the non-shaking condition, M. morganii secretes two main proteins of ∼80 and ∼100 kDa and displays multiple antibiotic resistance (MAR) values of 0.39. In contrast, the bacterial cell in a shaking flask secreted one prominent protein of ∼50 kDa and exhibited a lower MAR value of 0.31. These observations correspond with a significant reduction in both in vitro and in vivo virulence of M. morganii grown in non-shaking conditions, namely haemolysin, swimming motility, histomorphological changes, and survival assay as compared to bacterial cells in a shaking flask displayed higher virulence in both in vitro and in vivo condition. Furthermore, non-shaking tube-grown cells have higher expression of saa, astA, ibeA, papC and papG genes as compared to cells grown in the shaking flask exhibiting higher expression of kpsMT K1, kpsMT "K5", stx1, ireA and cdt genes. Taking together, the study offers strong evidence supporting the presence of two phenotype forms in the multidrug-resistant and pathogenic M. morganii strain, showing differential phenotypes. Additionally, since water flow and movement are prevalent characteristics in aquaculture systems, they can exert fluid shear on the resident microbial communities. Therefore, our study could serve as a foundation for understanding the behavior of M. morganii in aquaculture settings and enable the possibility of monitoring and controlling this multidrug-resistant and pathogenic bacterium by steering phenotypes.

The role of fluid friction in streamer formation and biofilm growth

Biofilms constitute one of the most common forms of living matter, playing an increasingly important role in technology, health, and ecology. While it is well established that biofilm growth and morphology are highly dependent on the external flow environment, the precise role of fluid friction has remained elusive. We grew Bacillus subtilis biofilms on flat surfaces of a channel in a laminar flow at wall shear stresses spanning one order of magnitude (τw = 0.068 Pa to τw = 0.67 Pa). By monitoring the three-dimensional distribution of biofilm over seven days, we found that the biofilms consist of smaller microcolonies, shaped like leaning pillars, many of which feature a streamer in the form of a thin filament that originates near the tip of the pillar. While the shape, size, and distribution of these microcolonies depend on the imposed shear stress, the same structural features appear consistently for all shear stress values. The formation of streamers occurs after the development of a base structure, suggesting that the latter induces a secondary flow that triggers streamer formation. Moreover, we observed that the biofilm volume grows approximately linearly over seven days for all shear stress values, with a growth rate inversely proportional to the wall shear stress. We develop a scaling model, providing insight into the mechanisms by which friction limits biofilm growth.

Emerging models to study competitive interactions within bacterial communities

Within both abiotic and host environments, bacteria typically exist as diverse, multispecies communities and have crucial roles in human health, agriculture, and industry. In these communities, bacteria compete for resources, and these competitive interactions can shape the overall population structure and community function. Studying bacterial community dynamics requires experimental model systems that capture the different interaction networks between bacteria and their surroundings. We examine the recent literature advancing such systems, including (i) in silico models establishing the theoretical basis for how cell-to-cell interactions can influence population level dynamics, (ii) in vitro models characterizing specific interbacterial interactions, (iii) organ-on-a-chip models revealing the physiologically relevant parameters, such as spatial structure and mechanical forces, that bacteria encounter within a host, and (iv) in vivo plant and animal models connecting the host responses to interbacterial interactions. Each of these systems has greatly contributed to our understanding of bacterial community dynamics and can be used synergistically to understand how bacterial competition influences population architecture.

Shear stress controls prokaryotic and eukaryotic biofilm communities together with EPS and metabolomic expression in a semi-controlled coastal environment in the NW Mediterranean Sea

While waves, swells and currents are important drivers of the ocean, their specific influence on the biocolonization of marine surfaces has been little studied. The aim of this study was to determine how hydrodynamics influence the dynamics of microbial communities, metabolic production, macrofoulers and the associated vagile fauna. Using a field device simulating a shear stress gradient, a multi-scale characterization of attached communities (metabarcoding, LC-MS, biochemical tests, microscopy) was carried out for one month each season in Toulon Bay (northwestern Mediterranean). Shear stress appeared to be the primary factor influencing biomass, EPS production and community structure and composition. Especially, the transition from static to dynamic conditions, characterized by varying shear stress intensities, had a more pronounced effect on prokaryotic and eukaryotic beta-diversity than changes in shear stress intensity or seasonal physico-chemical parameters. In static samples, mobile microbe feeders such as arthropods and nematodes were predominant, whereas shear stress favored the colonization of sessile organisms and heterotrophic protists using the protective structure of biofilms for growth. The increase in shear stress resulted in a decrease in biomass but an overproduction of EPS, specifically exopolysaccharides, suggesting an adaptive response to withstand shear forces. Metabolite analysis highlighted the influence of shear stress on community dynamics. Specific metabolites associated with static conditions correlated positively with certain bacterial and algal groups, indirectly indicating reduced grazer control with increasing shear stress.

Effects of fluid shear stress on oral biofilm formation and composition and the transcriptional response of Streptococcus gordonii

Biofilms are subjected to many environmental pressures that can influence community structure and physiology. In the oral cavity, and many other environments, biofilms are exposed to forces generated by fluid flow; however, our understanding of how oral biofilms respond to these forces remains limited. In this study, we developed a linear rocker model of fluid flow to study the impact of shear forces on Streptococcus gordonii and dental plaque-derived multispecies biofilms. We observed that as shear forces increased, S. gordonii biofilm biomass decreased. Reduced biomass was largely independent of overall bacterial growth. Transcriptome analysis of S. gordonii biofilms exposed to moderate levels of shear stress uncovered numerous genes with differential expression under shear. We also evaluated an ex vivo plaque biofilm exposed to fluid shear forces. Like S. gordonii, the plaque biofilm displayed decreased biomass as shear forces increased. Examination of plaque community composition revealed decreased diversity and compositional changes in the plaque biofilm exposed to shear. These studies help to elucidate the impact of fluid shear on oral bacteria and may be extended to other bacterial biofilm systems.

Effect of shear rate on early Shewanella oneidensis adhesion dynamics monitored by deep learning

Understanding pioneer bacterial adhesion is essential to appreciate bacterial colonization and consider appropriate control strategies. This bacterial entrapment at the wall is known to be controlled by many physical, chemical or biological factors, including hydrodynamic conditions. However, due to the nature of early bacterial adhesion, i.e. a short and dynamic process with low biomass involved, such investigations are challenging. In this context, our study aimed to evaluate the effect of wall shear rate on the early bacterial adhesion dynamics. Firstly, at the population scale by assessing bacterial colonization kinetics and the mechanisms responsible for wall transfer under shear rates using a time-lapse approach. Secondly, at the individual scale, by implementing an automated image processing method based on deep learning to track each individual pioneer bacterium on the wall. Bacterial adhesion experiments are performed on a model bacterium (Shewanella oneidensis MR-1) at different shear rates (0 to1250 s-1) in a microfluidic system mounted under a microscope equipped with a CCD camera. Image processing was performed using a trained neural network (YOLOv8), which allowed information extraction, i.e. bacterial wall residence time and orientation for each adhered bacterium during pioneer colonization (14 min). Collected from over 20,000 bacteria, our results showed that adhered bacteria had a very short residence time at the wall, with over 70 % remaining less than 1 min. Shear rates had a non-proportional effect on pioneer colonization with a bell-shape profile suggesting that intermediate shear rates improved both bacterial wall residence time as well as colonization rate and level. This lack of proportionality highlights the dual effect of wall shear rate on early bacterial colonization; initially increasing it improves bacterial colonization up to a threshold, beyond which it leads to higher bacterial wall detachment. The present study provides quantitative data on the individual dynamics of just adhered bacteria within a population when exposed to different rates of wall shear.

Biofilm formation of Lactiplantibacillus plantarum food isolates under flow and resistance to disinfectant agents

Bacterial biofilms formed in food processing environments can be resilient against cleaning and disinfection causing recontamination and spoilage of foods. We investigated the biofilm formation of six Lactiplantibacillus plantarum food spoilage isolates (FBR1-FBR6) using WCFS1 as a reference strain, and examined the impact of benzalkonium chloride (BKC) and peracetic acid (PAA) on planktonic and biofilm cells formed under static and dynamic flow conditions. We used a custom-designed setup composed of a 48-well plate with 0.8 ml culture volumes. We quantified biofilm formation under static and dynamic flow conditions with a flow rate of 3.2 ml/h using plate counting, Crystal Violet (CV) staining, and fluorescence staining techniques. Our findings revealed significant differences in biofilm formation and disinfectant resistance among studied strains and cell types. We observed that flow promoted biofilm formation in some strains and increased the number of culturable cells within biofilms in all strains. Furthermore, biofilm cells demonstrated higher resistance to disinfectants in comparison to planktonic cells for certain strains. Interestingly, cells from dispersed under flow biofilms show higher resistance to disinfectants than cells from static biofilms. The results indicate the importance of flow conditions in influencing L. plantarum food isolates biofilm formation and disinfection resistance, which may have implications for product contamination and spoilage risks.

Impairment of Listeria monocytogenes biofilm developed on industrial surfaces by Latilactobacillus curvatus CRL1579 bacteriocin

The effect of lactocin AL705, bacteriocin produced by Latilactobacillus (Lat.) curvatus CRL1579 against Listeria biofilms on stainless steel (SS) and polytetrafluoroethylene (PTFE) coupons at 10 °C was investigated. L. monocytogenes FBUNT showed the greatest adhesion on both surfaces associated to the hydrophobicity of cell surface. Partially purified bacteriocin (800 UA/mL) effectively inhibited L. monocytogenes preformed biofilm through displacement strategy, reducing the pathogen by 5.54 ± 0.26 and 4.74 ± 0.05 log cycles at 3 and 6 days, respectively. The bacteriocin-producer decreased the pathogen biofilm by ∼2.84 log cycles. Control and Bac- treated samples reached cell counts of 7.05 ± 0.18 and 6.79 ± 0.06 log CFU/cm2 after 6 days of incubation. Confocal scanning laser microscopy (CLSM) allowed visualizing the inhibitory effect of lactocin AL705 on L. monocytogenes preformed biofilms under static and hydrodynamic flow conditions. A greater effect of the bacteriocin was found at 3 days independently of the surface matrix and pathogen growth conditions at 10 °C. As a more realistic approach, biofilm displacement strategy under continuous flow conditions showed a significant loss of biomass, mean thickness and substratum coverage of pathogen biofilm. These findings highlight the anti-biofilm capacity of lactocin AL705 and their potential application in food industries.

Fluid flow drives phenotypic heterogeneity in bacterial growth and adhesion on surfaces

Bacteria often thrive in surface-attached communities, where they can form biofilms affording them multiple advantages. In this sessile form, fluid flow is a key component of their environments, renewing nutrients and transporting metabolic products and signaling molecules. It also controls colonization patterns and growth rates on surfaces, through bacteria transport, attachment and detachment. However, the current understanding of bacterial growth on surfaces neglects the possibility that bacteria may modulate their division behavior as a response to flow. Here, we employed single-cell imaging in microfluidic experiments to demonstrate that attached Escherichia coli cells can enter a growth arrest state while simultaneously enhancing their adhesion underflow. Despite utilizing clonal populations, we observed a non-uniform response characterized by bistable dynamics, with co-existing subpopulations of non-dividing and actively dividing bacteria. As the proportion of non-dividing bacteria increased with the applied flow rate, it resulted in a reduction in the average growth rate of bacterial populations on flow-exposed surfaces. Dividing bacteria exhibited asymmetric attachment, whereas non-dividing counterparts adhered to the surface via both cell poles. Hence, this phenotypic diversity allows bacterial colonies to combine enhanced attachment with sustained growth, although at a reduced rate, which may be a significant advantage in fluctuating flow conditions.

Microfluidic Platform with Precisely Controlled Hydrodynamic Parameters and Integrated Features for Generation of Microvortices to Accurately Form and Monitor Biofilms in Flow

Microorganisms often live in habitats characterized by fluid flow, and their adhesion to surfaces in industrial systems or clinical settings may lead to pipe clogging, microbially influenced corrosion, material deterioration, food spoilage, infections, and human illness. Here, a novel microfluidic platform was developed to investigate biofilm formation under precisely controlled (i) cell concentration, (ii) temperature, and (iii) flow conditions. The developed platform central unit is a single-channel microfluidic flow cell designed to ensure ultrahomogeneous flow and condition in its central area, where features, e.g., with trapping properties, can be incorporated. In comparison to static and macroflow chamber assays for biofilm studies, microfluidic chips allow in situ monitoring of biofilm formation under various flow regimes and have better environment control and smaller sample requirements. Flow simulations and experiments with fluorescent particles were used to simulate bacteria flow in the platform cell for calculating flow velocity and direction at the microscale level. The combination of flow analysis and fluorescent strain injection in the cell showed that microtraps placed at the center of the channel were efficient in capturing bacteria at determined positions and to study how flow conditions, especially microvortices, can affect biofilm formation. The microfluidic platform exhibited improved performances in terms of homogeneity and robustness for in vitro biofilm formation. We anticipate the presented platform to be suitable for broad, versatile, and high-throughput biofilm studies at the microscale level.

Response of sediment microbial communities to the flow effect of the triangular artificial reef: A simulation-based experimental study

Artificial reefs (ARs), as an important tool for habitat restoration, play significant impacts on benthic microbial ecosystems. This study utilized 16S rRNA gene sequencing technology and computational fluid dynamics (CFD) flow simulation to investigate the effects of flow field distribution around ARs on microbial community structure. The results revealed distinct regional distribution patterns of microbial communities affected by different hydrodynamic conditions. Flow velocity and flow regime of water in sediment-water interface shaped the microbial community structure. The diversity and richness in R-HF were significantly decreased compared to other five regions (p < 0.05). At the phyla and OUT levels, most abundant taxa (1>%) showed an enrichment trend in R-HB. However, more than half of differentially abundant taxa were enriched in R-HB, which was significantly correlated with organic matter (OM). Bugbase phenotypic predictions indicated a low abundance of the anaerobic phenotype in R-HF and a high abundance of the biofilm-forming phenotype in R-HB.

Biofilm inhibition/eradication: exploring strategies and confronting challenges in combatting biofilm

Biofilms are complex communities of microorganisms enclosed in a self-produced extracellular matrix, posing a significant threat to different sectors, including healthcare and industry. This review provides an overview of the challenges faced due to biofilm formation and different novel strategies that can combat biofilm formation. Bacteria inside the biofilm exhibit increased resistance against different antimicrobial agents, including conventional antibiotics, which can lead to severe problems in livestock and animals, including humans. In addition, biofilm formation also imposes heavy economic pressure on industries. Hence it becomes necessary to explore newer alternatives to eradicate biofilms effectively without applying selection pressure on the bacteria. Excessive usage of antibiotics may also lead to an increase in the number of resistant strains as bacteria employ an advanced antimicrobial resistance mechanism. This review provides insight into multifaceted technologies like quorum sensing inhibition, enzymes, antimicrobial peptides, bacteriophage, phytocompounds, and nanotechnology to neutralize biofilms without developing antimicrobial resistance (AMR). Furthermore, it will pave the way for developing newer therapeutic agents to deal with biofilms more efficiently.

Organ-on-chip models for infectious disease research

Research on microbial pathogens has traditionally relied on animal and cell culture models to mimic infection processes in the host. Over recent years, developments in microfluidics and bioengineering have led to organ-on-chip (OoC) technologies. These microfluidic systems create conditions that are more physiologically relevant and can be considered humanized in vitro models. Here we review various OoC models and how they have been applied for infectious disease research. We outline the properties that make them valuable tools in microbiology, such as dynamic microenvironments, vascularization, near-physiological tissue constitutions and partial integration of functional immune cells, as well as their limitations. Finally, we discuss the prospects for OoCs and their potential role in future infectious disease research.

Community-forming traits play role in effective colonization of plant-growth-promoting bacteria and improved plant growth

Community-forming traits (CFts) play an important role in the effective colonization of plant-growth-promoting bacterial communities that influence host plants positively by modulating their adaptive functions. In this study, by considering plant-growth-promoting traits (PGPts) and community-forming traits (CFts), three communities were constructed, viz., SM1 (PGPts), SM2 (CFts), and SM3 (PGPts+CFts). Each category isolates were picked up on the basis of their catabolic diversity of different carbon sources. Results revealed a distinctive pattern in the colonization of the communities possessed with CF traits. It was observed that the community with CFts colonized inside the plant in groups or in large aggregations, whereas the community with only PGPts colonized as separate individual and small colonies inside the plant root and leaf. The effect of SM3 in the microcosm experiment was more significant than the uninoculated control by 22.12%, 27.19%, and 9.11% improvement in germination percentage, chlorophyll content, and plant biomass, respectively. The significant difference shown by the microbial community SM3 clearly demonstrates the integrated effect of CFts and PGPts on effective colonization vis-à-vis positive influence on the host plant. Further detailed characterization of the interaction will take this technology ahead in sustainable agriculture.

A Millifluidic Chamber for Controlled Shear Stress Testing: Application to Microbial Cultures

In vitro platforms such as bioreactors and microfluidic devices are commonly designed to engineer tissue models as well as to replicate the crosstalk between cells and microorganisms hosted in the human body. These systems promote nutrient supply and waste removal through culture medium recirculation; consequently, they intrinsically expose cellular structures to shear stress, be it a desired mechanical stimulus to drive the cell fate or a potential inhibitor for the model maturation. Assessing the impact of shear stress on cellular or microbial cultures thus represents a crucial step to define proper environmental conditions for in vitro models. In this light, the aim of this study was to develop a millifluidic device enabling to generate fully controlled shear stress profiles for quantitatively probing its influence on tissue or bacterial models, overcoming the limitations of previous reports proposing similar devices. Relying on this millifluidic tool, we present a systematic methodology to test how adherent cellular structures react to shear forces, which was applied to the case of microbial biofilms as a proof of concept. The results obtained suggest our approach as a suitable testbench to evaluate culture conditions in terms of shear stress faced by cells or microorganisms.

Challenges and current advances in in vitro biofilm characterization

Biofilms are structured communities of bacterial cells encased in a self-produced polymeric matrix, which develop over time and exhibit temporal responses to stimuli from internal biological processes or external environmental changes. They can be detrimental, threatening public health and causing economic loss, while they also play beneficial roles in ecosystem health, biotechnology processes, and industrial settings. Biofilms express extreme heterogeneity in their physical properties and structural composition, resulting in critical challenges in understanding them comprehensively. The lack of detailed knowledge of biofilms and their phenotypes has deterred significant progress in developing strategies to control their negative impacts and take advantage of their beneficial applications. A range of in vitro models and characterization tools have been developed and used to study biofilm growth and, specifically, to investigate the impact of environmental and growth factors on their development. This review article discusses the existing knowledge of biofilm properties and explains how external factors, such as flow condition, surface, interface, and host factor, may impact biofilm growth. The limitations of current tools, techniques, and in vitro models that are currently used for biofilms are also presented.

A standard 96-well based high throughput microfluidic perfusion biofilm reactor for in situ optical analysis

Biofilm infections represent a major public health threat due to their high tolerance to antimicrobials and the lack of specific anti-biofilm drugs. To develop such drugs, it is crucial to have high-throughput biofilm growth systems that can emulate in vivo conditions without the cost and complexity of animal models. However, no current biofilm reactor can provide in vivo-like conditions in a high throughput standard microtiter format. This paper demonstrates a novel high-throughput (HT) microfluidic perfusion biofilm reactor (HT-μPBR) compatible with a standard 96-well microtiter plate for in situ optical analysis. A snap-on liquid-tight cover for standard microtiter plates was designed and fabricated with fluidic channels to provide closed-loop recirculating perfusion. Our system takes steps toward providing in vivo-like conditions with controlled shear stress and nutrient delivery. We describe the system fabrication and usage in optical analysis of biomass and viability of Escherichia coli (E. coli) biofilms. The HT-μPBR was set to perfuse at 1 mL/min corresponding to an average shear rate of approximately [Formula: see text] on the bottom surface of a single well. Biofilms were detected on well plate bottoms and measured using a fluorescence microscope and plate reader to determine biomass and viability. Samples cultured in the HT-μPBR showed increased biomass while maintaining viability after 24 h. The HT-μPBR can further be combined with HT antibiotic susceptibility testing and additional optical techniques such as time-lapse imaging to improve understanding of the drug reaction mechanism as well as the optimization of drug combinations and delivery profiles.

An Enzybiotic Cocktail Effectively Disrupts Preformed Dual Biofilm of Staphylococcus aureus and Enterococcus faecalis

Multidrug-resistant bacterial infections are on the rise around the world. Chronic infections caused by these pathogens through biofilm mediation often complicate the situation. In natural settings, biofilms are often formed with different species of bacteria existing synergistically or antagonistically. Biofilms on diabetic foot ulcers are formed predominantly by two opportunistic pathogens, Staphylococcus aureus and Enterococcus faecalis. Bacteriophages and phage-based proteins, including endolysins, have been found to be active against biofilms. In this study, we evaluated the activity of two engineered enzybiotics either by themselves or as a combination against a dual biofilm formed by S. aureus and E. faecalis in an inert glass surface. An additive effect in rapidly disrupting the preformed dual biofilm was observed with the cocktail of proteins, in comparison with mono treatment. The cocktail-treated biofilms were dispersed by more than 90% within 3 h of treatment. Apart from biofilm disruption, bacterial cells embedded in the biofilm matrix were also effectively reduced by more than 90% within 3 h of treatment. This is the first instance where a cocktail of engineered enzybiotics has been effectively used to impede the structural integrity of a dual biofilm.

Lactobacillus plantarum strains show diversity in biofilm formation under flow conditions

In many natural and technological applications, microbial biofilms grow under fluid flow. In this project, we investigated the influence of flow on the formation and growth of biofilms produced by gram-positive Lactobacillus plantarum strains WCFS1 and CIP104448. We used an in-house designed device based on a 48-well plate with culture volumes of 0.8 ml, and quantified total biofilm formation under static and flow conditions with flow rates 0.8, 1.6, 3.2 and 4.8 ml/h (with 1, 2, 4 and 6 volume changes per hour) using crystal violet (CV) staining, and determined the number of viable biofilm cells based on plate counts. The amount of total biofilm under flow conditions increased in the CIP 104448 strain, with significantly increased staining at the wall of the wells. However, in the WCFS1 strain, no significant difference in the amount of biofilm formed under flow and static conditions was observed. Plate counts showed that flow caused an increase in the number of viable biofilm cells for both strains. In addition, using enzyme treatment experiments, we found that for WCFS1 in the static condition, the amount of mature biofilm was declined after DNase I and Proteinase K treatment, while for flow conditions, the decline was only observed for DNase I treatment. The CIP104448 biofilms formed under both static and flow conditions only showed a decline in the CV staining after adding Proteinase K, indicating different contributions of extracellular DNA (eDNA) and proteinaceous matrix components to biofilm formation in the tested strains.

Designs and methodologies to recreate in vitro human gut microbiota models

The human gut microbiota is widely considered to be a metabolic organ hidden within our bodies, playing a crucial role in the host’s physiology. Several factors affect its composition, so a wide variety of microbes residing in the gut are present in the world population. Individual excessive imbalances in microbial composition are often associated with human disorders and pathologies, and new investigative strategies to gain insight into these pathologies and define pharmaceutical therapies for their treatment are needed. In vitro models of the human gut microbiota are commonly used to study microbial fermentation patterns, community composition, and host-microbe interactions. Bioreactors and microfluidic devices have been designed to culture microorganisms from the human gut microbiota in a dynamic environment in the presence or absence of eukaryotic cells to interact with. In this review, we will describe the overall elements required to create a functioning, reproducible, and accurate in vitro culture of the human gut microbiota. In addition, we will analyze some of the devices currently used to study fermentation processes and relationships between the human gut microbiota and host eukaryotic cells.

Graphic abstract

History-dependent attachment ofPseudomonas aeruginosato solid-liquid interfaces and the dependence of the bacterial surface density on the residence time distribution

This study investigates how the recent history of bacteria affects their attachment to a solid-liquid interface. We compare the attachment from a flowing suspension of the bacterium,Pseudomonas aeruginosaPAO1, after one of two histories: (a) passage through a tube packed with glass beads or (b) passage through an empty tube. The glass beads were designed to increase the rate of bacterial interactions with solid-liquid surfaces prior to observation in a flow cell. Analysis of time-lapse microscopy of the bacteria in the flow cells shows that the residence time distribution and surface density of bacteria differ for these two histories. In particular, bacteria exiting the bead-filled tube, in contrast to those bacteria exiting the empty tube, are less likely to attach to the subsequent flow cell window and begin surface growth. In contrast, when we compared two histories defined by different lengths of tubing, there was no difference in either the mean residence time or the surface density. In order to provide a framework for understanding these results, we present a phenomenological model in which the rate of bacterial surface density growth,dN(t)/dt, depends on two terms. One term models the initial attachment of bacteria to a surface, and is proportional to the nonprocessive cumulative residence time distribution for bacteria that attach and detach from the surface without cell division. The second term for the rate is proportional to the bacterial surface density and models surface cell division. The model is in surprisingly good agreement with the data even though the surface growth process is a complex interplay between attachment/detachment at the solid-liquid interface and cell division on the surface.

A large-scale, multi-year microbial community survey of a freshwater trout aquaculture facility

Aquaculture is an important tool for solving the growing worldwide food demand, but infectious diseases of farmed animals represent a serious roadblock to continued industry growth. Therefore, it is essential to understand the microbial communities that reside within the built environments of aquaculture facilities to identify reservoirs of bacterial pathogens and potential correlations between commensal species and specific disease agents. Here, we present the results from 3 years of sampling a commercial rainbow trout aquaculture facility. We observed that the microbial communities residing on the abiotic surfaces within the hatchery were distinct from those residing on the surfaces at the facility's water source as well as the production raceways, despite similar communities in the water column at each location. Also, a subset of the water community seeds the biofilm communities. Lastly, we detected a common fish pathogen, Flavobacterium columnare, within the hatchery, including at the source water inlet. Importantly, the relative abundance of this pathogen was correlated with clinical disease. Our results characterized the microbial communities in an aquaculture facility, established that the hatchery environment contains a unique community composition and demonstrated that a specific fish pathogen resides within abiotic surface biofilms and is seeded from the natural water source.

Zwitterionic surface chemistry enhances detachment of bacteria under shear

The ubiquitous nature of microorganisms, especially of biofilm-forming bacteria, makes biofouling a prevalent challenge in many settings, including medical and industrial environments immersed in liquid and subjected to shear forces. Recent studies have shown that zwitterionic groups are effective in suppressing bacteria and protein adhesion as well as biofilm growth. However, the effect of zwitterionic groups on the removal of surface-bound bacteria has not been extensively studied. Here we present a microfluidic approach to evaluate the effectiveness in facilitating bacteria detachment by shear of an antifouling surface treatment using (3-(dimethyl;(3-trimethoxysilyl)propyl)ammonia propane-1-sulfonate), a sulfobetaine silane (SBS). Control studies show that SBS-functionalized surfaces greatly increase protein (bovine serum albumin) removal upon rinsing. On the same surfaces, enhanced bacteria (Pseudomonas aeruginosa) removal is observed under shear. To quantify this enhancement a microfluidic shear device is employed to investigate how SBS-functionalized surfaces promote bacteria detachment under shear. By using a microfluidic channel with five shear zones, we compare the removal of bacteria from zwitterionic and glass surfaces under different shear rates. At times of 15 min, 30 min, and 60 min, bacteria adhesion on SBS-functionalized surfaces is reduced relative to the control surface (glass) under quiescent conditions. However, surface-associated bacteria on the SBS-functionalized glass and control show similar percentages of live cells, suggesting minimal intrinsic biocidal effect from the SBS-functionalized surface. Notably, when exposed to shear rates ranging from 104 to 105 s-1, significantly fewer bacteria remain on the SBS-functionalized surfaces. These results demonstrate the potential of zwitterionic sulfobetaine as effective antifouling coatings that facilitate the removal of bacteria under shear.

Heme cross-feeding can augment Staphylococcus aureus and Enterococcus faecalis dual species biofilms

The contribution of biofilms to virulence and as a barrier to treatment is well-established for Staphylococcus aureus and Enterococcus faecalis, both nosocomial pathogens frequently isolated from biofilm-associated infections. Despite frequent co-isolation, their interactions in biofilms have not been well-characterized. We report that in combination, these two species can give rise to augmented biofilms biomass that is dependent on the activation of E. faecalis aerobic respiration. In E. faecalis, respiration requires both exogenous heme to activate the cydAB-encoded heme-dependent cytochrome bd, and the availability of O₂. We determined that the ABC transporter encoded by cydDC contributes to heme import. In dual species biofilms, S. aureus provides the heme to activate E. faecalis respiration. S. aureus mutants deficient in heme biosynthesis were unable to augment biofilms whereas heme alone is sufficient to augment E. faecalis mono-species biofilms. Our results demonstrate that S. aureus-derived heme, likely in the form of released hemoproteins, promotes E. faecalis biofilm formation, and that E. faecalis gelatinase activity facilitates heme extraction from hemoproteins. This interspecies interaction and metabolic cross-feeding may explain the frequent co-occurrence of these microbes in biofilm-associated infections.

Competition between growth and shear stress drives intermittency in preferential flow paths in porous medium biofilms

Bacteria in porous media, such as soils, aquifers, and filters, often form surface-attached communities known as biofilms. Biofilms are affected by fluid flow through the porous medium, for example, for nutrient supply, and they, in turn, affect the flow. A striking example of this interplay is the strong intermittency in flow that can occur when biofilms nearly clog the porous medium. Intermittency manifests itself as the rapid opening and slow closing of individual preferential flow paths (PFPs) through the biofilm-porous medium structure, leading to continual spatiotemporal rearrangement. The drastic changes to the flow and mass transport induced by intermittency can affect the functioning and efficiency of natural and industrial systems. Yet, the mechanistic origin of intermittency remains unexplained. Here, we show that the mechanism driving PFP intermittency is the competition between microbial growth and shear stress. We combined microfluidic experiments quantifying Bacillus subtilis biofilm formation and behavior in synthetic porous media for different pore sizes and flow rates with a mathematical model accounting for flow through the biofilm and biofilm poroelasticity to reveal the underlying mechanisms. We show that the closing of PFPs is driven by microbial growth, controlled by nutrient mass flow. Opposing this, we find that the opening of PFPs is driven by flow-induced shear stress, which increases as a PFP becomes narrower due to microbial growth, causing biofilm compression and rupture. Our results demonstrate that microbial growth and its competition with shear stresses can lead to strong temporal variability in flow and transport conditions in bioclogged porous media.

Fluid Flow Induces Differential Detachment of Live and Dead Bacterial Cells from Nanostructured Surfaces

Nanotopographic surfaces are proven to be successful in killing bacterial cells upon contact. This non-chemical bactericidal property has paved an alternative way of fighting bacterial colonization and associated problems, especially the issue of bacteria evolving resistance against antibiotic and antiseptic agents. Recent advancements in nanotopographic bactericidal surfaces have made them suitable for many applications in medical and industrial sectors. The bactericidal effect of nanotopographic surfaces is classically studied under static conditions, but the actual potential applications do have fluid flow in them. In this study, we have studied how fluid flow can affect the adherence of bacterial cells on nanotopographic surfaces. Gram-positive and Gram-negative bacterial species were tested under varying fluid flow rates for their retention and viability after flow exposure. The total number of adherent cells for both species was reduced in the presence of flow, but there was no flowrate dependency. There was a significant reduction in the number of live cells remaining on nanotopographic surfaces with an increasing flowrate for both species. Conversely, we observed a flowrate-independent increase in the number of adherent dead cells. Our results indicated that the presence of flow differentially affected the adherent live and dead bacterial cells on nanotopographic surfaces. This could be because dead bacterial cells were physically pierced by the nano-features, whereas live cells adhered via physiochemical interactions with the surface. Therefore, fluid shear was insufficient to overcome adhesion forces between the surface and dead cells. Furthermore, hydrodynamic forces due to the flow can cause more planktonic and detached live cells to collide with nano-features on the surface, causing more cells to lyse. These results show that nanotopographic surfaces do not have self-cleaning ability as opposed to natural bactericidal nanotopographic surfaces, and nanotopographic surfaces tend to perform better under flow conditions. These findings are highly useful for developing and optimizing nanotopographic surfaces for medical and industrial applications.

A Microfluidic Chip for Studies of the Dynamics of Antibiotic Resistance Selection in Bacterial Biofilms

Biofilms are arguably the most important mode of growth of bacteria, but how antibiotic resistance emerges and is selected in biofilms remains poorly understood. Several models to study evolution of antibiotic resistance have been developed, however, their usability varies depending on the nature of the biological question. Here, we developed and validated a microfluidic chip (Brimor) for studying the dynamics of enrichment of antibiotic-resistant bacteria in biofilms using real-time monitoring with confocal microscopy. In situ extracellular cellulose staining and physical disruption of the biomass confirmed Escherichia coli growth as biofilms in the chip. We showed that seven generations of growth occur in 16 h when biofilms were established in the growth chambers of Brimor, and that bacterial death and growth rates could be estimated under these conditions using a plasmid with a conditional replication origin. Additionally, competition experiments between antibiotic-susceptible and -resistant bacteria at sub-inhibitory concentrations demonstrated that the antibiotic ciprofloxacin selected for antibiotic resistance in bacterial biofilms at concentrations 17-fold below the minimal inhibitory concentration of susceptible planktonic bacteria. Overall, the microfluidic chip is easy to use and a relevant model for studying the dynamics of selection of antibiotic resistance in bacterial biofilms and we anticipate that the Brimor chip will facilitate basic research in this area.

Bioadhesion on Textured Interfaces in the Human Oral Cavity-An In Situ Study

Extensive biofilm formation on materials used in restorative dentistry is a common reason for their failure and the development of oral diseases like peri-implantitis or secondary caries. Therefore, novel materials and strategies that result in reduced biofouling capacities are urgently sought. Previous research suggests that surface structures in the range of bacterial cell sizes seem to be a promising approach to modulate bacterial adhesion and biofilm formation. Here we investigated bioadhesion within the oral cavity on a low surface energy material (perfluorpolyether) with different texture types (line-, hole-, pillar-like), feature sizes in a range from 0.7–4.5 µm and graded distances (0.7–130.5 µm). As a model system, the materials were fixed on splints and exposed to the oral cavity. We analyzed the enzymatic activity of amylase and lysozyme, pellicle formation, and bacterial colonization after 8 h intraoral exposure. In opposite to in vitro experiments, these in situ experiments revealed no clear signs of altered bacterial surface colonization regarding structure dimensions and texture types compared to unstructured substrates or natural enamel. In part, there seemed to be a decreasing trend of adherent cells with increasing periodicities and structure sizes, but this pattern was weak and irregular. Pellicle formation took place on all substrates in an unaltered manner. However, pellicle formation was most pronounced within recessed areas thereby partially masking the three-dimensional character of the surfaces. As the natural pellicle layer is obviously the most dominant prerequisite for bacterial adhesion, colonization in the oral environment cannot be easily controlled by structural means.

Optically Accessible Microfluidic Flow Channels for Noninvasive High-Resolution Biofilm Imaging Using Lattice Light Sheet Microscopy

Imaging platforms that enable long-term, high-resolution imaging of biofilms are required to study cellular level dynamics within bacterial biofilms. By combining high spatial and temporal resolution and low phototoxicity, lattice light sheet microscopy (LLSM) has made critical contributions to the study of cellular dynamics. However, the power of LLSM has not yet been leveraged for biofilm research because the open-on-top imaging geometry using water-immersion objective lenses is not compatible with living bacterial specimens; bacterial growth on the microscope's objective lenses makes long-term time-lapse imaging impossible and raises considerable safety concerns for microscope users. To make LLSM compatible with pathogenic bacterial specimens, we developed hermetically sealed, but optically accessible, microfluidic flow channels that can sustain bacterial biofilm growth for multiple days under precisely controllable physical and chemical conditions. To generate a liquid- and gas-tight seal, we glued a thin polymer film across a 3D-printed channel, where the top wall had been omitted. We achieved negligible optical aberrations by using polymer films that precisely match the refractive index of water. Bacteria do not adhere to the polymer film itself, so that the polymer window provides unobstructed optical access to the channel interior. Inside the flow channels, biofilms can be grown on arbitrary, even nontransparent, surfaces. By integrating this flow channel with LLSM, we were able to record the growth of S. oneidensis MR-1 biofilms over several days at cellular resolution without any observable phototoxicity or photodamage.

Four species of bacteria deterministically assemble to form a stable biofilm in a millifluidic channel

Multispecies microbial adherent communities are widespread in nature and organisms, although the principles of their assembly and development remain unclear. Here, we test the possibility of establishing a simplified but relevant model of multispecies biofilm in a non-invasive laboratory setup for the real-time monitoring of community development. We demonstrate that the four chosen species (Bacillus thuringiensis, Pseudomonas fluorescens, Kocuria varians, and Rhodocyclus sp.) form a dynamic community that deterministically reaches its equilibrium after ~30 h of growth. We reveal the emergence of complexity in this simplified community as reported by an increase in spatial heterogeneity and non-monotonic developmental kinetics. Importantly, we find interspecies interactions consisting of competition for resources-particularly oxygen-and both direct and indirect physical interactions. The simplified experimental model opens new avenues to the study of adherent bacterial communities and their behavior in the context of rapid global change.

Bacterial streamers as colloidal systems: Five grand challenges

Bacteria can thrive in biofilms, which are intricately organized communities with cells encased in a self-secreted matrix of extracellular polymeric substances (EPS). Imposed hydrodynamic stresses can transform this active colloidal dispersion of bacteria and EPS into slender thread-like entities called streamers. In this perspective article, the reader is introduced to the world of such deformable 'bacteria-EPS' composites that are a subclass of the generic flow-induced colloidal structures. While bacterial streamers have been shown to form in a variety of hydrodynamic conditions (turbulent and creeping flows), its abiotic analogues have only been demonstrated in low Reynolds number (Re < 1) particle-laden polymeric flows. Streamers are relevant to a variety of situations ranging from natural formations in caves and river beds to clogging of biomedical devices and filtration membranes. A critical review of the relevant biophysical aspects of streamer formation phenomena and unique attributes of its material behavior are distilled to unveil five grand scientific challenges. The coupling between colloidal hydrodynamics, device geometry and streamer formation are highlighted.

A novel mechanosensitive channel controls osmoregulation, differentiation, and infectivity in Trypanosoma cruzi

The causative agent of Chagas disease undergoes drastic morphological and biochemical modifications as it passes between hosts and transitions from extracellular to intracellular stages. The osmotic and mechanical aspects of these cellular transformations are not understood. Here we identify and characterize a novel mechanosensitive channel in Trypanosoma cruzi (TcMscS) belonging to the superfamily of small-conductance mechanosensitive channels (MscS). TcMscS is activated by membrane tension and forms a large pore permeable to anions, cations, and small osmolytes. The channel changes its location from the contractile vacuole complex in epimastigotes to the plasma membrane as the parasites develop into intracellular amastigotes. TcMscS knockout parasites show significant fitness defects, including increased cell volume, calcium dysregulation, impaired differentiation, and a dramatic decrease in infectivity. Our work provides mechanistic insights into components supporting pathogen adaptation inside the host, thus opening the exploration of mechanosensation as a prerequisite for protozoan infectivity.

Improving Phage-Biofilm In Vitro Experimentation

Bacteriophages or phages, the viruses of bacteria, are abundant components of most ecosystems, including those where bacteria predominantly occupy biofilm niches. Understanding the phage impact on bacterial biofilms therefore can be crucial toward understanding both phage and bacterial ecology. Here, we take a critical look at the study of bacteriophage interactions with bacterial biofilms as carried out in vitro, since these studies serve as bases of our ecological and therapeutic understanding of phage impacts on biofilms. We suggest that phage-biofilm in vitro experiments often may be improved in terms of both design and interpretation. Specific issues discussed include (a) not distinguishing control of new biofilm growth from removal of existing biofilm, (b) inadequate descriptions of phage titers, (c) artificially small overlying fluid volumes, (d) limited explorations of treatment dosing and duration, (e) only end-point rather than kinetic analyses, (f) importance of distinguishing phage enzymatic from phage bacteriolytic anti-biofilm activities, (g) limitations of biofilm biomass determinations, (h) free-phage interference with viable-count determinations, and (i) importance of experimental conditions. Toward bettering understanding of the ecology of bacteriophage-biofilm interactions, and of phage-mediated biofilm disruption, we discuss here these various issues as well as provide tips toward improving experiments and their reporting.

The association between initial adhesion and cyanobacterial biofilm development

Although laboratory assays provide valuable information about the antifouling effectiveness of marine surfaces and the dynamics of biofilm formation, they may be laborious and time-consuming. This study aimed to determine the potential of short-time adhesion assays to estimate how biofilm development may proceed. The initial adhesion and cyanobacterial biofilm formation were evaluated using glass and polymer epoxy resin surfaces under different hydrodynamic conditions and were compared using linear regression models. For initial adhesion, the polymer epoxy resin surface was significantly associated with a lower number of adhered cells compared with glass (-1.27 × 105 cells.cm-2). Likewise, the number of adhered cells was significantly lower (-1.16 × 105 cells.cm-2) at 185 than at 40 rpm. This tendency was maintained during biofilm development and was supported by the biofilm wet weight, thickness, chlorophyll a content and structure. Results indicated a significant correlation between the number of adhered and biofilm cells (r = 0.800, p < 0.001). Moreover, the number of biofilm cells on day 42 was dependent on the number of adhered cells at the end of the initial adhesion and hydrodynamic conditions (R2 = 0.795, p < 0.001). These findings demonstrate the high potential of initial adhesion assays to estimate marine biofilm development.

Implication of Surface Properties, Bacterial Motility, and Hydrodynamic Conditions on Bacterial Surface Sensing and Their Initial Adhesion

Biofilms are structured microbial communities attached to surfaces, which play a significant role in the persistence of biofoulings in both medical and industrial settings. Bacteria in biofilms are mostly embedded in a complex matrix comprised of extracellular polymeric substances that provide mechanical stability and protection against environmental adversities. Once the biofilm is matured, it becomes extremely difficult to kill bacteria or mechanically remove biofilms from solid surfaces. Therefore, interrupting the bacterial surface sensing mechanism and subsequent initial binding process of bacteria to surfaces is essential to effectively prevent biofilm-associated problems. Noting that the process of bacterial adhesion is influenced by many factors, including material surface properties, this review summarizes recent works dedicated to understanding the influences of surface charge, surface wettability, roughness, topography, stiffness, and combination of properties on bacterial adhesion. This review also highlights other factors that are often neglected in bacterial adhesion studies such as bacterial motility and the effect of hydrodynamic flow. Lastly, the present review features recent innovations in nanotechnology-based antifouling systems to engineer new concepts of antibiofilm surfaces.

Hydrodynamics and surface properties influence biofilm proliferation

A biofilm is an interface-associated colloidal dispersion of bacterial cells and excreted polymers in which microorganisms find protection from their environment. Successful colonization of a surface by a bacterial community is typically a detriment to human health and property. Insight into the biofilm life-cycle provides clues on how their proliferation can be suppressed. In this review, we follow a cell through the cycle of attachment, growth, and departure from a colony. Among the abundance of factors that guide the three phases, we focus on hydrodynamics and stratum properties due to the synergistic effect such properties have on bacteria rejection and removal. Cell motion, whether facilitated by the environment via medium flow or self-actuated by use of an appendage, drastically improves the survivability of a bacterium. Once in the vicinity of a stratum, a single cell is exposed to near-surface interactions, such as van der Waals, electrostatic and specific interactions, similarly to any other colloidal particle. The success of the attachment and the potential for detachment is heavily influenced by surface properties such as material type and topography. The growth of the colony is similarly guided by mainstream flow and the convective transport throughout the biofilm. Beyond the growth phase, hydrodynamic traction forces on a biofilm can elicit strongly non-linear viscoelastic responses from the biofilm soft matter. As the colony exhausts the means of survival at a particular location, a set of trigger signals activates mechanisms of bacterial release, a life-cycle phase also facilitated by fluid flow. A review of biofilm-relevant hydrodynamics and startum properties provides insight into future research avenues.

Spatial distribution of mechanical properties in Pseudomonas aeruginosa biofilms, and their potential impacts on biofilm deformation

The mechanical properties of biofilms can be used to predict biofilm deformation under external forces, for example, under fluid flow. We used magnetic tweezers to spatially map the compliance of Pseudomonas aeruginosa biofilms at the microscale, then applied modeling to assess its effects on biofilm deformation. Biofilms were grown in capillary flow cells with Reynolds numbers (Re) ranging from 0.28 to 13.9, bulk dissolved oxygen (DO) concentrations from 1 mg/L to 8 mg/L, and bulk calcium ion (Ca²⁺ ) concentrations of 0 and 100 mg CaCl₂ /L. Higher Re numbers resulted in more uniform biofilm morphologies. The biofilm was stiffer at the center of the flow cell than near the walls. Lower bulk DO led to more stratified biofilms. Higher Ca²⁺ concentrations led to increased stiffness and more uniform mechanical properties. Using the experimental mechanical properties, fluid-structure interaction models predicted up to 64% greater deformation for heterogeneous biofilms, compared with a homogeneous biofilms with the same average properties. However, the deviation depended on the biofilm morphology and flow regime. Our results show significant spatial mechanical variability exists at the microscale, and that this variability can potentially affect biofilm deformation. The average biofilm mechanical properties, provided in many studies, should be used with caution when predicting biofilm deformation.

Treated wastewater reuse in micro-irrigation: effect of shear stress on biofilm development kinetics and chemical precipitation

Treated wastewater in micro-irrigation is a promising approach that could be used to decrease the pressure on good quality water resources. However, the clogging of such systems due to biofilm development and chemical precipitation constitute a constraint with the use of treated wastewater (TWW) and lead to lower irrigation system performance. The objective of this work is to study the development of biofilm and composition of fouling due to TWW under shear stresses of 0.7, 2.2 and 4.4 Pa detected along micro-irrigation systems. For this purpose, a Taylor-Couette reactor (TCR) was specifically calibrated for the cultivation of biofilm. The analysis of fouling composition samples (organic and inorganic) shows that biofilm tends to develop under the highest shear stress value (4.4 Pa). Precipitation of calcium carbonate in the form of calcite was observed in conjunction with biofilm growth using X-ray diffractometry (XRD) and thermogravimetric analysis (TGA). These results can be used to ascertain the origins of chemical and biological clogging of drippers and fouling of pipes related to reclaimed water- irrigation.

Biofilm and swarming emergent behaviours controlled through the aid of biophysical understanding and tools

Bacteria can organise themselves into communities in the forms of biofilms and swarms. Through chemical and physical interactions between cells, these communities exhibit emergent properties that individual cells alone do not have. While bacterial communities have been mainly studied in the context of biochemistry and molecular biology, recent years have seen rapid advancements in the biophysical understanding of emergent phenomena through physical interactions in biofilms and swarms. Moreover, new technologies to control bacterial emergent behaviours by physical means are emerging in synthetic biology. Such technologies are particularly promising for developing engineered living materials (ELM) and devices and controlling contamination and biofouling. In this minireview, we overview recent studies unveiling physical and mechanical cues that trigger and affect swarming and biofilm development. In particular, we focus on cell shape, motion and density as the key parameters for mechanical cell-cell interactions within a community. We then showcase recent studies that use physical stimuli for patterning bacterial communities, altering collective behaviours and preventing biofilm formation. Finally, we discuss the future potential extension of biophysical and bioengineering research on microbial communities through computational modelling and deeper investigation of mechano-electrophysiological coupling.

Accumulation of dead cells from contact killing facilitates coexistence in bacterial biofilms

Bacterial communities are governed by a wide variety of social interactions, some of which are antagonistic with potential significance for bacterial warfare. Several antagonistic mechanisms, such as killing via the type VI secretion system (T6SS), require killer cells to directly contact target cells. The T6SS is hypothesized to be a highly potent weapon, capable of facilitating the invasion and defence of bacterial populations. However, we find that the efficacy of contact killing is severely limited by the material consequences of cell death. Through experiments with Vibrio cholerae strains that kill via the T6SS, we show that dead cell debris quickly accumulates at the interface that forms between competing strains, preventing physical contact and thus preventing killing. While previous experiments have shown that T6SS killing can reduce a population of target cells by as much as 106-fold, we find that, as a result of the formation of dead cell debris barriers, the impact of contact killing depends sensitively on the initial concentration of killer cells. Killer cells are incapable of invading or eliminating competitors on a community level. Instead, bacterial warfare itself can facilitate coexistence between nominally antagonistic strains. While a variety of defensive strategies against microbial warfare exist, the material consequences of cell death provide target cells with their first line of defence.

Antibiofilm Properties of Temporin-L on Pseudomonas fluorescens in Static and In-Flow Conditions

Biofilms consist of a complex microbial community adhering to biotic or abiotic surfaces and enclosed within a protein/polysaccharide self-produced matrix. The formation of this structure represents the most important adaptive mechanism that leads to antibacterial resistance, and therefore, closely connected to pathogenicity. Antimicrobial peptides (AMPs) could represent attractive candidates for the design of new antibiotics because of their specific characteristics. AMPs show a broad activity spectrum, a relative selectivity towards their targets (microbial membranes), the ability to act on both proliferative and quiescent cells, a rapid mechanism of action, and above all, a low propensity for developing resistance. This article investigates the effect at subMIC concentrations of Temporin-L (TL) on biofilm formation in Pseudomonas fluorescens (P. fluorescens) both in static and dynamic conditions, showing that TL displays antibiofilm properties. Biofilm formation in static conditions was analyzed by the Crystal Violet assay. Investigation of biofilms in dynamic conditions was performed in a commercial microfluidic device consisting of a microflow chamber to simulate real flow conditions in the human body. Biofilm morphology was examined using Confocal Laser Scanning Microscopy and quantified via image analysis. The investigation of TL effects on P. fluorescens showed that when subMIC concentrations of this peptide were added during bacterial growth, TL exerted antibiofilm activity, impairing biofilm formation both in static and dynamic conditions. Moreover, TL also affects mature biofilm as confocal microscopy analyses showed that a large portion of preformed biofilm architecture was clearly perturbed by the peptide addition with a significative decrease of all the biofilm surface properties and the overall biomass. Finally, in these conditions, TL did not affect bacterial cells as the live/dead cell ratio remained unchanged without any increase in damaged cells, confirming an actual antibiofilm activity of the peptide.

Using multiple carbon brush cathode in a novel tubular photosynthetic microbial fuel cell for enhancing bioenergy generation and advanced wastewater treatment

A novel tubular-type photosynthetic microbial fuel cell (PMFC) with algal growth and multiple electrodes in the cathode chamber was operated at various hydraulic retention times (HRTs). When the HRT in the cathode was fixed to 24 h, cell voltage gradually increased as the HRT in the anode was decreased from 24 h to 6 h, and at 6 h, 315 mV of electricity was generated and the dissolved oxygen concentration was 10.31 ± 2.60 mg/L. However, HRT changes in the cathode did not affect cell voltage generation much, although a sharp decrease in cell voltage was observed at 2-h HRT. With wastewater passing through the chambers in series (19.3-h total HRT), the PMFC was able to successfully generate cell voltage and remove nutrients. The maximum COD and phosphorus removal percentages were obtained for an initial COD of 300 mg/L, while the maximum nitrogen removal was obtained for an initial COD of 400 mg/L.

Bioadhesion in the oral cavity and approaches for biofilm management by surface modifications

BACKGROUND

All soft and solid surface structures in the oral cavity are covered by the acquired pellicle followed by bacterial colonization. This applies for natural structures as well as for restorative or prosthetic materials; the adherent bacterial biofilm is associated among others with the development of caries, periodontal diseases, peri-implantitis, or denture-associated stomatitis. Accordingly, there is a considerable demand for novel materials and coatings that limit and modulate bacterial attachment and/or propagation of microorganisms.

OBJECTIVES AND FINDINGS

The present paper depicts the current knowledge on the impact of different physicochemical surface characteristics on bioadsorption in the oral cavity. Furthermore, it was carved out which strategies were developed in dental research and general surface science to inhibit bacterial colonization and to delay biofilm formation by low-fouling or "easy-to-clean" surfaces. These include the modulation of physicochemical properties such as periodic topographies, roughness, surface free energy, or hardness. In recent years, a large emphasis was laid on micro- and nanostructured surfaces and on liquid repellent superhydrophic as well as superhydrophilic interfaces. Materials incorporating mobile or bound nanoparticles promoting bacteriostatic or bacteriotoxic properties were also used. Recently, chemically textured interfaces gained increasing interest and could represent promising solutions for innovative antibioadhesion interfaces. Due to the unique conditions in the oral cavity, mainly in vivo or in situ studies were considered in the review.

CONCLUSION

Despite many promising approaches for modulation of biofilm formation in the oral cavity, the ubiquitous phenomenon of bioadsorption and adhesion pellicle formation in the challenging oral milieu masks surface properties and therewith hampers low-fouling strategies.

CLINICAL RELEVANCE

Improved dental materials and surface coatings with easy-to-clean properties have the potential to improve oral health, but extensive and systematic research is required in this field to develop biocompatible and effective substances.

Exploring flow-biofilm-sediment interactions: Assessment of current status and future challenges

Biofilm activities and their interactions with physical, chemical and biological processes are of great importance for a variety of ecosystem functions, impacting hydrogeomorphology, water quality and aquatic ecosystem health. Effective management of water bodies requires advancing our understanding of how flow influences biofilm-bound sediment and ecosystem processes and vice-versa. However, research on this triangle of flow-biofilm-sediment is still at its infancy. In this Review, we summarize the current state of the art and methodological approaches in the flow-biofilm-sediment research with an emphasis on biostabilization and fine sediment dynamics mainly in the benthic zone of lotic and lentic environments. Example studies of this three-way interaction across a range of spatial scales from cell (nm - µm) to patch scale (mm - dm) are highlighted in view of the urgent need for interdisciplinary approaches. As a contribution to the review, we combine a literature survey with results of a pilot experiment that was conducted in the framework of a joint workshop to explore the feasibility of asking interdisciplinary questions. Further, within this workshop various observation and measuring approaches were tested and the quality of the achieved results was evaluated individually and in combination. Accordingly, the paper concludes by highlighting the following research challenges to be considered within the forthcoming years in the triangle of flow-biofilm-sediment: i) Establish a collaborative work among hydraulic and sedimentation engineers as well as ecologists to study mutual goals with appropriate methods. Perform realistic experimental studies to test hypotheses on flow-biofilm-sediment interactions as well as structural and mechanical characteristics of the bed. ii) Consider spatially varying characteristics of flow at the sediment-water interface. Utilize combinations of microsensors and non-intrusive optical methods, such as particle image velocimetry and laser scanner to elucidate the mechanism behind biofilm growth as well as mass and momentum flux exchanges between biofilm and water. Use molecular approaches (DNA, pigments, staining, microscopy) for sophisticated community analyses. Link varying flow regimes to microbial communities (and processes) and fine sediment properties to explore the role of key microbial players and functions in enhancing sediment stability (biostabilization). iii) Link laboratory-scale observations to larger scales relevant for management of water bodies. Conduct field experiments to better understand the complex effects of variable flow and sediment regimes on biostabilization. Employ scalable and informative observation techniques (e.g., hyperspectral imaging, particle tracking) that can support predictions on the functional aspects, such as metabolic activity, bed stability, nutrient fluxes under variable regimes of flow-biofilm-sediment.

Experimental Assessment of the Performance of Two Marine Coatings to Curb Biofilm Formation of Microfoulers

Biofilms formed on submerged marine surfaces play a critical role in the fouling process, causing increased fuel consumption, corrosion, and high maintenance costs. Thus, marine biofouling is a major issue and motivates the development of antifouling coatings. In this study, the performance of two commercial marine coatings, a foul-release silicone-based paint (SilRef) and an epoxy resin (EpoRef), was evaluated regarding their abilities to prevent biofilm formation by Cyanobium sp. and Pseudoalteromonas tunicata (common microfoulers). Biofilms were developed under defined hydrodynamic conditions to simulate marine settings, and the number of biofilm cells, wet weight, and thickness were monitored for 7 weeks. The biofilm structure was analyzed by confocal laser scanning microscopy (CLSM) at the end-point. Results demonstrated that EpoRef surfaces were effective in inhibiting biofilm formation at initial stages (until day 28), while SilRef surfaces showed high efficacy in decreasing biofilm formation during maturation (from day 35 onwards). Wet weight and thickness analysis, as well as CLSM data, indicate that SilRef surfaces were less prone to biofilm formation than EpoRef surfaces. Furthermore, the efficacy of SilRef surfaces may be dependent on the fouling microorganism, while the performance of EpoRef was strongly influenced by a combined effect of surface and microorganism.

Improved understanding of biofilm development by Piscirickettsia salmonis reveals potential risks for the persistence and dissemination of piscirickettsiosis

Piscirickettsia salmonis is the causative agent of piscirickettsiosis, a disease with high socio-economic impacts for Chilean salmonid aquaculture. The identification of major environmental reservoirs for P. salmonis has long been ignored. Most microbial life occurs in biofilms, with possible implications in disease outbreaks as pathogen seed banks. Herein, we report on an in vitro analysis of biofilm formation by P. salmonis Psal-103 (LF-89-like genotype) and Psal-104 (EM-90-like genotype), the aim of which was to gain new insights into the ecological role of biofilms using multiple approaches. The cytotoxic response of the salmon head kidney cell line to P. salmonis showed interisolate differences, depending on the source of the bacterial inoculum (biofilm or planktonic). Biofilm formation showed a variable-length lag-phase, which was associated with wider fluctuations in biofilm viability. Interisolate differences in the lag phase emerged regardless of the nutritional content of the medium, but both isolates formed mature biofilms from 288 h onwards. Psal-103 biofilms were sensitive to Atlantic salmon skin mucus during early formation, whereas Psal-104 biofilms were more tolerant. The ability of P. salmonis to form viable and mucus-tolerant biofilms on plastic surfaces in seawater represents a potentially important environmental risk for the persistence and dissemination of piscirickettsiosis.