Zinc Essentiality, Toxicity, and Its Bacterial Bioremediation: A Comprehensive Insight

Quantifying the distribution and origins of aerosol zinc across the Northern Hemisphere using stable zinc isotopes: A review

Quantitatively assessing the origins of aerosol zinc (Zn) is crucial for understanding of the global atmospheric Zn cycle and for formulating targeted policies to mitigate anthropogenic Zn emissions. Zn isotope ratios (denoted as δ⁶⁶Zn) serve as powerful tools for constraining the origins of aerosol Zn. This review comprehensively compiles an δ⁶⁶Zn (relative to Lyon JMC Zn standard) dataset (n = 207) for multi-sized aerosols observed exclusively in the Northern Hemisphere, encompassing diverse atmospheric environments, including urban areas and remote deserts, glacier, and ocean. Reanalysis of the integrated dataset reveals both the spatial heterogeneity of aerosol δ⁶⁶Zn and its partitioning pattern across various size fractions. Spatially, aerosol δ⁶⁶Zn exhibits an upward trend from urban areas to ocean, deserts, and ultimately to glacier environments, accompanied by a shift in isotopic signatures from negative to very positive values. Notably, with the exception of desert aerosols, those from other atmospheric environments exhibit δ⁶⁶Zn that deviate significantly from the Bulk Silicate Earth (BSE) background value. In terms of particle size, δ⁶⁶Zn in size-fractionated aerosols displays an initial decrease followed by an increase as particle size decreases, with the 2.7 µm serving as a transitional boundary. Given the limited research on quantifying the origins of aerosol Zn, this review conducts a quantitative source allocation of aerosol Zn by incorporating a compiled δ⁶⁶Zn dataset into the MixSIAR model. Four primary endmembers are defined, each with respective δ⁶⁶Zn values: natural dust (+0.25 ± 0.15 ‰), metal smelting (-0.68 ± 0.07 ‰), coal combustion (+1.31 ± 0.11 ‰), and non-exhaust traffic emissions (+0.22 ± 0.07 ‰). Model calculations indicate that beyond urban areas-which are primary hotspots for anthropogenic Zn impacts-over half of atmospheric Zn in remote glacier and ocean regions originates from anthropogenic emissions. This underscores the pervasive influence of human activities on the atmospheric Zn cycle, even in geographically remote regions. To deepen understanding of the global Zn transport and cycle, future research should prioritize expanding isotope observations in the Southern Hemisphere.

Mechanisms of microbial hyper-resistance to heavy metals: Cellular metal accumulation, metabolic reorganization, and GroEL chaperonin in extremophilic bacterium Sulfobacillus thermotolerans in response to zinc

Mine waste disposal in dumps and stockpiles causes environmental pollution, particularly through microbe-assisted acid mine drainage (AMD) generation and groundwater contamination with hazardous heavy metal(loid)s. Metal hyper-resistance in acidophilic microorganisms remains an underexplored intriguing phenomenon. Using a multi-level approach, we provide the first data on extreme zinc resistance mechanisms in Sulfobacillus thermotolerans, recognized as one of the most metal-resistant organisms known. Under high zinc levels, Sb. thermotolerans cells exhibited efficient zinc sorption and low intracellular accumulation. Remarkably, mechanisms involved the upregulation of stress response and metabolic pathway proteins, including different GroEL chaperonin forms. Moreover, overexpression of the Sb. thermotolerans StGroEL chaperonin in Escherichia coli enhanced its growth and zinc resistance under zinc stress. 3D structure modeling and ion binding site prediction in StGroEL revealed 46 amino acid residues potentially involved in zinc docking. Thriving in natural and engineered environments, such as sulfide mines, mine waste disposal sites, and AMD, Sb. thermotolerans is a key member of acidophilic microbial communities used in commercial biotechnologies for sulfidic raw material processing. These findings, beyond their fundamental scientific relevance, have important implications for environmental protection, including AMD management, safe hazardous waste disposal, and a broader application of eco-friendly biomining technologies using metal-resistant microbial communities.

Co-Exposure to Different Zinc Concentrations and High-Fat Diet Modules Endoplasmic Reticulum Stress and Lipotoxicity through the MTF-1/GPx7 Axis in Yellow Catfish (Pelteobagrus fulvidraco)

As industrialization and societal development accelerate, various organisms, including humans, are exposed to environmental hazards, such as zinc (Zn) and high-fat diet (HFD). These widespread exposures pose significant threats to public health; however, the combined effects and underlying mechanisms of these environmental factors on lipotoxicity remain unclear. In this study, the yellow catfish (Pelteobagrus fulvidraco) was used as a model to investigate the impact of different Zn levels and HFD coexposure on hepatic lipotoxicity. The results indicated that low concentrations of Zn (L-Zn) significantly reduced hepatic lipid accumulation, oxidative stress, and endoplasmic reticulum (ER) stress compared to HFD-only treatment, while high concentrations of Zn (H-Zn) exacerbated these effects. Mechanistically, L-Zn alleviated ER stress by scavenging H2O2 and O2•- within the ER via the MTF-1/GPx7 pathway. Glutathione peroxidase 7 (GPx7), an ER-resident antioxidant enzyme, played a crucial role in mitigating ER stress and lipotoxicity, with metal-responsive transcription factor 1 (MTF-1) identified as its regulator. This study is the first to demonstrate the dual role of Zn in hepatic lipotoxicity, revealing the Zn2+/MTF-1/GPx7 axis as a key modulator of ER stress and lipid metabolism. These findings highlight the importance of considering combined environmental exposures in public health and environmental risk assessments.

Unraveling the genetic basis of microbial metal resistance: Shift from mendelian to systems biology

Microbial metal resistance, a trait that enables microorganisms to withstand high levels of toxic metals, has been studied for over a century. The significance of uncovering these mechanisms goes beyond basic science as they have implications for human health through their connection to microbial pathogenesis, metal bioremediation, and biomining. Recent advances in analytical chemistry and molecular biology have accelerated the discovery and understanding of genetic mechanisms underlying microbial metal resistance, identifying specific metal resistance genes and their operons. The emergence of omics tools has further propelled research towards a comprehensive understanding of how cells respond to metal stress at the systemic level, revealing the complex regulatory networks and evolutionary dynamics that drive microbial adaptation to metal-rich environments. In this article, we present a historical overview of the evolving understanding of the genetic determinants of metal resistance in microbes. Through multiple narrative threads, we illustrate how our knowledge of microbial metal resistance and genetics has interacted with genetic tools and concept development. This review also discusses how our understanding of microbial metal resistance has progressed from the Mendelian perspective to the current systems biology viewpoint, particularly as omics approaches have considerably enhanced our understanding. This system-level understanding has opened new possibilities for genetically engineered microorganisms to regulate metal homeostasis.

Impact of chronic exposure to ternary metal mixtures on behavioral and cellular responses in Nauphoeta cinerea nymphs

There is a  growing concern about the impact of environmental contamination by metals on insects owing to their biodiversity and important ecological roles. We investigated the neurobehavioral traits, cellular responses, and levels of metals in tissues of Nauphoeta cinerea nymphs exposed, separately and in ternary mixtures, to arsenic (15 and 7.5 mg/L), copper (15 and 7.5 mg/L), and zinc (100 and 50 µg/L), in drinking water for 35 consecutive days. Results showed that the diminutions in locomotor parameters (maximum speed, motility time, and distance traveled), motor and turning capabilities (path efficiency, turn angle, and body rotation) and the increase in anxiety-like behavior (total time freezing and freezing episodes) were more pronounced in individual metal exposure than triple metal mixtures groups. Barring zinc alone group, acetylcholinesterase activity decreased significantly in all the treatment groups compared to the control. The diminutions in glutathione level and antioxidant enzyme activities were partially attenuated in the fat body, midgut, and head of insects in the triple metal mixtures groups. Further, the levels of nitric oxide, hydrogen peroxide, lipid peroxidation, and reactive oxygen and nitrogen species were higher in individual metal exposed insects than the ternary mixture groups. The concentrations of arsenic, copper, and zinc in the fat body, midgut, and head of insects were significantly higher in individual metal exposure groups than the ternary metal mixtures groups. Collectively, the detrimental effects of elevated ecological concentrations of arsenic, copper, and zinc were more pronounced in insects exposed to individual metal than those in ternary mixtures groups.

Soil quality, risk assessment and source identification of heavy metals in native and improved paddy soil and rice grains from Tamil Nadu, India

The present study aims to assess the soil quality, source analysis, and risk assessment of heavy metals in native and improved rice paddies in Tamil Nadu, India. The mean values of DTPA-extractable heavy metal levels in native paddy soil were 0.06, 0.52, 2.61, 3.15, 0.48, 39.48, 97.61 mg kg-1, while improved paddy soil had values of 0.11, 1.98, 0.91, 3.21, 1.54, 20.30, 7.78 mg kg-1 for Cd, Pb, Ni, Cu, Zn, Fe and Mn. These levels were below the acceptable limits set by Indian and European Union soil quality guidelines. All native rice varieties had grain Pb concentration ranging from 0.71 to 1.34 mg kg-1, but all improved rice varieties had higher levels of Cd, Pb, and Fe then prescribed limits. Nemerow pollution index (NPI) level of Ni indicated high pollution in native soil. Potential ecological risk index (RI) values of Cd indicated moderate risk in improved soil. Based on the EF and TF values, the paddy fields and rice plants are classified as 'severe enrichment' and 'accumulator' of heavy metals (Cd and Pb), respectively. The HI and THQ levels (Ni, Cd and Pb) were > 1 for both adults and children. Principal component analysis (PCA) found that PC1 eigenvalue of 5.63 (40.21%) and 6.91 (49.37%) and PC2 with 4.84 eigenvalue of 5.63 (34.56%) and 3.97 (28.37%) for native and improved soil, respectively, while cluster analysis (CA) revealed three distinct groups between the metals studied.

ZntR is a critical regulator for zinc homeostasis and involved in pathogenicity in Riemerella anatipestifer

Zinc (Zn2+) is essential for all bacteria, but excessive Zn2+ levels are toxic. Bacteria maintain zinc homeostasis through regulators, such as Zur, AdcR, and ZntR. Riemerella anatipestifer is a significant Flavobacteriales pathogen causing acute serositis in ducks and other birds. In this study, we identified a homolog of ZntR, a regulator for zinc homeostasis, and demonstrated its contribution to the pathogenicity of R. anatipestifer. Deletion of zntR makes the bacteria hypersensitive to excess Zn2+ but not to other metals like manganese (Mn2+), copper (Cu2+), cobalt (Co2+), and nickel (Ni2+). Deletion of zntR also leads to intracellular zinc accumulation but not of other metals. Additionally, compared to the wild type, the deletion of zntR increases resistance to oxidants hydrogen peroxide (H2O2) and sodium hypochlorite (NaOCl), respectively. The deletion of zntR causes significant changes in transcriptional and protein expression levels, revealing 35 genes with potential zinc metabolism functions. Among them, zupT, which is inhibited by ZntR, is required for zinc transport and resistance to oxidative stress. Finally, deletion of zntR leads to attenuation of colonization in ducklings. In summary, ZntR is a crucial regulator for zinc homeostasis and contributes to the pathogenicity of R. anatipestifer.IMPORTANCEZinc homeostasis plays a critical role in the environmental adaptability of bacteria. Riemerella anatipestifer is a significant pathogen in poultry with the potential to encounter zinc-deficient or zinc-excess environment. The mechanism of zinc homeostasis in this bacterium remains largely unexplored. In this study, we showed that the transcriptional regulator ZntR of R. anatipestifer is critical for zinc homeostasis by altering the transcription and expression of a number of genes. Importantly, ZntR inhibits the transcription of zinc transporter ZupT and contributes to colonization in R. anatipestifer. The results are significant for understanding zinc homeostasis and the pathogenic mechanisms in R. anatipestifer.

Zinc bioaccumulation in house sparrows (Passer domesticus) across urban and rural areas of Meknes, Morocco: a bioindicator of environmental pollution

This study investigates zinc (Zn) bioaccumulation in house sparrows (Passer domesticus) across urban and rural areas of Meknes, Morocco, to evaluate their effectiveness as bioindicators of environmental pollution. Fifty sparrows were sampled from five locations: an industrial zone, town center, bus station, main road, and a rural reference site. Zinc concentrations, measured on a dry weight basis using Inductively Coupled Plasma Mass Spectrometry (ICP-MS), revealed significant differences between sites for the liver (111.43 ± 4.25 µg/g), kidneys (56.68 ± 3.50 µg/g), blood (1.638 ± 0.652 µg/g), bones (21.36 ± 6.10 µg/g), and heart (16.87 ± 5.15 µg/g) at the most polluted site, Sidi Bouzekri industrial zone, according to ANOVA results (p < 0.05). No significant differences were found for feathers (9.85 ± 4.65 µg/g), lungs (12.02 ± 4.58 µg/g), and brain (9.49 ± 6.23 µg/g) across the study locations. The rural site, despite its distance from industrial sources, exhibited elevated zinc levels, likely due to agricultural activities. These findings highlight the effectiveness of house sparrows as bioindicators for monitoring zinc contamination, capturing pollution impacts from both urban and rural sources. Ongoing monitoring of zinc pollution in diverse environments remains essential for managing heavy metal exposure risks.

Advances in graphene-based nanomaterials for heavy metal removal from water: Mini review

The environment and public health are seriously at risk from the increasing levels of heavy metal (HM) pollution in water bodies, hence efficient remediation techniques must be developed. Unique physicochemical properties of graphene (Gn) such as its enormous surface area, chemical stability, and extraordinary adsorption capabilities have made it a promising candidate for application in various adsorption processes. Recent studies indicate the heavy metal removal capabilities of Gn-based materials such as Gn oxide (GO) and reduced GO (rGO) reach 99% efficiency rates for lead (Pb2+), cadmium (Cd2+), and mercury (Hg2+) through strong electrostatic bonds and metal coordination along with π-π stacking interactions. In addition, the selective nature of Gn-based adsorbents grows better through functionalization because it incorporates thiol, amine, and sulfonic acid groups. The integration of Gn-based materials with metal-organic frameworks (MOFs) combined with magnetic nanoparticles along with bio-based polymers enhances adsorption efficiency and increases stability while offering recyclability features. The conclusion of this study discusses the current obstacles such as cost, scalability, environmental impact, and selectivity and potential future developments for the widespread use of Gn-based adsorbents in water treatment, highlighting the significance of continued research to improve these substances for useful environmental applications. PRACTITIONER POINTS: Graphene-based materials exhibit high capacity for adsorbing various heavy metals, enhancing water purification. Functionalization of graphene improves its ability to selectively target and remove specific heavy metals like mercury and lead. Graphene derivatives can achieve heavy metal removal within minutes, making them efficient for water treatment. Despite high synthesis costs, graphene's superior performance may lower long-term operational costs in wastewater treatment.

Overview of the heavy metal contamination in Mexico: sources of the contamination and issues in human health

This paper discusses information collected from original articles published between 1992 and 2022 regarding heavy metals (HMs) contamination in various environments across Mexico. The primary aim of this work was to identify the Mexican states where concentrations of HMs have been reported to exceed the maximum permissible limits for several types of soil, water, and sediment according to Mexican standards NOM-147-SEMARNAT/SSA1-2004, NOM-127-SSA1-2021, as well as international standards. The data collected indicates that 25 states in Mexico have reported at least one metal exceeding the maximum permissible limits in soil. Among these, Zacatecas, Nuevo Leon and Chihuahua had the highest number of HMs exceeding the standards. For sediment contamination, 26 states exceeded the permissible limits, with San Luis Potosí and Guerrero showing the highest number of HMs above the standards. Additionally, 26 states have reports of HMs exceeding the permissible limits in water, with Guanajuato and Guerrero having the highest number of HMs. Interestingly, the most frequent metals reported as soil contaminants are Cu, Fe, Pb and Zn; in sediment, they are Cd, Cr, Cu, Fe, Pb and Zn; and in water, they are Cd, Cr, Cu, Fe, Mn, Pb and Zn. The compiled information indicates that the primary anthropogenic sources of HMs release in Mexico include industrial activities, urban wastewater, mining, and agricultural practices. Furthermore, the data analyzed highlights several serious health risks associated with exposure to HMs, including cancer, central nervous system damage, DNA damage, and issues related to kidneys and lungs. This paper provides a comprehensive overview of HMs contamination in Mexico as well as the health challenges that arise from this contamination..

Zn2+ adsorption in ferric-silicates microstructures in sulfidic tailings mediated through mineral weathering by Acidithiobacillus species

Heavy metals released from metallic sulfidic tailings pose significant environmental threats by contaminating surface and groundwater in mining areas. Sustainable rehabilitation methods are essential to remove or stabilize these metals, improving the quality of acid mine drainage and minimizing pollution. This study examines the adsorption capacity of zinc ions (Zn2+) by different iron-silicate mineral groups under natural weathering and bacteria-regulated weathered conditions. Batch experiments revealed that all tested mineral groups exhibit limited adsorption Zn2+ on iron-silicate surfaces, with adsorption behavior aligning with Langmuir and Freundlich isotherm models. Among the mineral groups, pristine iron-muscovite (2.58 mg/g) and iron-chlorite (4.52 mg/g) demonstrated the highest Zn2+adsorption capacity, primarily due to favorable ion exchange properties and surface characteristics. Acidic conditions induced by pyrite oxidation and the experimental growth medium slightly reduced Zn2+ adsorption in samples without microbial inoculation. In contrast, the addition of Acidithiobacillus species modestly enhanced Zn2+ adsorption, likely through microbial alteration of silicate surface properties and the formation of secondary iron-silicate aggregates with high adsorption potential. The dominant adsorption mechanisms included electrostatic attractions, surface complexation and coprecipitation. It is recommended to elevate pH levels and thus enhance metal ion adsorption through the incorporation of alkaline additives such as zeolites or bauxite residue to optimize Zn2+ immobilization in sulfidic tailings. This study highlights the importance of both microbial and clay mineral selection in designing effective strategies for stabilizing Zn2+ in metallic sulfidic tailings.

Heavy metal contamination in cow and buffalo milk from industrial and residential areas of raipur, India: A health risk assessment

This study investigated heavy metal contamination in cow and buffalo milk from industrial and residential areas of Raipur, India, assessing health risks and identifying contamination sources. Milk samples were collected from seven sites and analyzed for Zn, Ni, Fe, Mn, Cu, Cr, Cd, Pb, and As using inductively coupled plasma-optical emission spectroscopy (ICP-OES) and atomic absorption spectroscopy (AAS). Results revealed higher contamination in industrial areas, with fodder being a primary source for Zn, Ni, Fe, and Cu, while water contributed to Mn, Cr, and As. Estimated daily intake (EDI), target hazard quotient (THQ), and carcinogenic risk (CR) determination highlighted non-carcinogenic risks for Ni, Fe, and Pb, and significant carcinogenic risks for Pb and As. The concentrations of Zn, Ni, Fe, Mn, Cu, Cr, Cd, Pb, and As in milk samples were ranged from 1.708 to 3.243, 0.078-0.295, 1.480-4.450, 0.119-0.472, 0.032-0.461, 0.007-0.040, 0.006-0.032, 0.040-0.204, and 0.006-0.023 mg/kg, respectively. The principal component analysis (PCA) identified fodder as a source of Zn, Ni, Fe, Cu, and Cd, while water contributed to Mn, Cr, and As. This study needed monitoring and regulation to mitigate health risks from contaminated milk in Raipur.

Synthesis and Characterization of Cellulose Acetate-HBA/Poly Sulfone Blend for Water Treatment Applications

Cellulose acetate (CA) was chemically modified with p-hydrazinobenzoic acid (HBA) for the fabrication of a CA-HBA polymeric membrane. The CA-HBA was characterized using NMR, UV-Vis, and EDX/SEM techniques. CA-HBA exhibited high hydrophilicity, as it included carboxylic groups as well as the hydroxyl group of the CA glycosidic ring. The HBA moieties increased the hydrophilicity and the number of active sites inside the CA polymeric matrix, but they did not improve the thermal stability of the polymer, as shown by the thermogravimetry (TGA). Polysulfone (PSF) was blended with CA-HBA in various compositions to produce highly thermal and effective membranes for water treatment applications. The fabricated membranes (CA-HBA/PSF) (5:95) (10:90) (15:85) were found to exhibit high thermal stabilities. The CA-HBA/PSF 15:85 membrane exhibited the highest efficiency towards the removal of Cu (II) ions, while the 5:95 membrane exhibited the highest salt rejection (89%).

Comprehensive elemental and physical characterization of vehicle brake wear emissions from two different brake pads following the Global Technical Regulation methodology

Non-exhaust emissions have gained increasing attention during the last years, with the upcoming EURO 7 regulation defining maximum PM10 emission factors for tire and brake emissions for the first time. This study, therefore, focusses on broadening the knowledge on chemical composition and physical characteristics of brake dust to define emission factors for heavy metal and organic pollutants. Particles from two pads were analyzed utilizing the Worldwide Harmonised Light Vehicle Test Procedure (WLTP) brake cycle. Geometric mean diameters for both pads were found with a bimodal distribution in the ultrafine range. PM10 emission factors of 15.1 ± 0.1 mg/km and 16.3 ± 0.4 mg/km were measured, which is 2.15 and 2.32 times higher than upcoming maximum permitted emission factor of 7 mg/km. On average 54.9 % and 58.1 % of PM10 was emitted as iron, with a wide variety of Fe concentrations between 43 - 75 % by mass found in individual particles. Other heavy metals, such as Cu, Cr, Mn and Zn, were also found and a high contribution of wear from the brake disc was noticeable, based on the elemental composition. Fe emission factors calculated from the WLTP brake cycle were 8-9 times higher than previously reported values in literature, while Cu levels were significantly lower based on recent trends in brake pad formulations. Four different PAH were detected even at the relatively low temperatures that are common for the WLTP brake test cycle.

Antioxidant therapy for infertile couples: a comprehensive review of the current status and consideration of future prospects

Oxidative stress (OS) is established as a key factor in the etiology of both male and female infertility, arising from an imbalance between reactive oxygen species (ROS) production and the endogenous antioxidant (AOX) defenses. In men, OS adversely affects sperm function by inducing DNA damage, reducing motility, significantly impairing sperm vitality through plasma membrane peroxidation and loss of membrane integrity, and ultimately compromising overall sperm quality. In women, OS is implicated in various reproductive disorders, including polycystic ovary syndrome, endometriosis, and premature ovarian failure, leading to diminished oocyte quality, disrupted folliculogenesis, and poorer reproductive outcomes. Antioxidant therapy represents a promising intervention to mitigate the harmful effects of ROS on reproductive health in additions to its easy accessibility, safety, and low cost. Despite several findings suggesting improvements in fertility potential with AOX therapy, the data remains inconclusive regarding optimal dosage and combination, duration of treatment, and the specific patient populations most likely to benefit. In this review, we discuss the role of AOXs in the management of infertile couples, focusing on their biological mechanisms, potential adverse effects, therapeutic efficacy, and clinical applications in improving reproductive outcomes in both natural conception and medically assisted reproduction. Additionally, we highlight the current practice patterns and recommendations for AOX supplementation during the course of infertility treatment. Further, we provide an overview on the limitations of the current research on the topic and insights for future studies to establish standardized AOX regimens and to assess their long-term impact on key outcomes such as live birth rates and miscarriage rates.

Evidence of eared doves consumption and the potential toxic exposure during the Regional Development period in Quito-Ecuador

Throughout history, food has played a fundamental role in the development of societies. An understanding of the diets of different cultures and their impact on health can provide valuable insights into their lifestyle. The identification of the animal remains found within two vessels is reported and, in addition, an assessment of whether the diet and soil composition of the period may be associated with toxic elements was carried out. The animal bones retrieved from the settlement, which dated from 25 to 203 cal AD, were identified as belonging to Zenaida cf. auriculata, commonly known as eared dove. Ancient starch was discovered in the sediments inside the vessels. These sediments, along with the pre-Hispanic soil collected in the study zone, showed moderate pollution, suggesting potential environmental contamination. For the first time, evidence that eared doves were part of the diet of the ancient inhabitants of Quito is presented, as shown by the occurrence of their bones within food processing utensils. Furthermore, the study highlights the possibility of environmental contamination due to volcanic eruptions that occurred during the Regional Development period from 500 BC to AD 500. These results can contribute to a better understanding of the living conditions of the early inhabitants of Quito and similar regions.

Electronic band structure modulation for sonodynamic therapy

Sonodynamic therapy (SDT) is a burgeoning and newfangled therapy modality with great application potential. Sonosensitizers are essential factors used to ensure the effectiveness of SDT. For the past few years, a lot of scientists have discovered many valid ways to refine and improve the performance of SDT. Among these methods, modulating the electronic band structure of sonosensitizers is one of the eminent measures to improve SDT, but relevant research studies on this are still unsatisfactory for actual transformation. Herein, this review provides a brief and comprehensive introduction of common ways to modulate electronic band structure, such as forming defects, doping, piezoelectric effect and heterostructure. Then, some nanomaterials with excellent properties that can be used as a sonosensitizer to enhance the SDT effect by modulating electronic band structure are overviewed, such as Ti-based, Zn-based, Bi-based, noble metal-based and MOF-based nanomaterials. At the same time, this paper also discusses the problems and challenges that may be encountered in the future application progress of SDT. In conclusion, the strategy of enhancing SDT through modulating electronic band structure will promote the rapid development of nanomedicine and provide a great research direction for SDT.

Effects of Zinc Compounds on the Enzymatic Activities of Lysozyme and Peroxidase and Their Antifungal Activities

This study aimed to investigate the effects of zinc compounds on the enzymatic activities of lysozyme, peroxidase, and the glucose oxidase-mediated peroxidase (GO-PO) system and their antifungal activities. Four different zinc compounds (zinc chloride, gluconate, lactate, and sulfate) were incubated with hen egg-white lysozyme (HEWL), bovine lactoperoxidase (bLPO), the GO-PO system, and human unstimulated whole saliva in solution and on a hydroxyapatite surface. Enzymatic activities of lysozyme, peroxidase, and the GO-PO system were measured through the hydrolysis of Micrococcus lysodeikticus, oxidation of fluorogenic 2',7'-dichlorofluorescin, and glucose assay, respectively. Interactions between zinc and enzymes were analyzed by surface plasmon resonance (SPR). The minimum inhibitory concentration (MIC) and candidacidal activities of zinc compounds were examined against three Candida albicans strains. Zinc gluconate and sulfate significantly increased the enzymatic activities of salivary lysozyme in the solution assay and of HEWL and salivary lysozyme on the hydroxyapatite surface. However, all examined zinc compounds significantly decreased the enzymatic activities of bLPO and salivary peroxidase in solution and on the surface. SPR analyses revealed binding of zinc to lysozyme and peroxidase, with affinity differing according to the zinc compounds. The MIC of zinc compounds against C. albicans was 1.0-2.4 mM. Candidacidal activities were 17.7-38.8% and 23.7-47.0% at 1.0 and 10 mM concentrations, respectively. In conclusion, zinc compounds enhanced lysozyme activity but inhibited peroxidase activity. Zinc compounds exhibited concentration-dependent candidacidal activity against C. albicans. Zinc compounds are potential therapeutic agents for oral health, especially for geriatric patients.

Unveiling the Bioleaching Versatility of Acidithiobacillus ferrooxidans

Acidithiobacillus ferrooxidans is a Gram-negative bacterium that thrives in extreme acidic conditions. It has emerged as a key player in biomining and bioleaching technologies thanks to its unique ability to mobilize a wide spectrum of elements, such as Li, P, V, Cr, Fe, Ni, Cu, Zn, Ga, As, Mo, W, Pb, U, and its role in ferrous iron oxidation and reduction. A. ferrooxidans catalyzes the extraction of elements by generating iron (III) ions in oxic conditions, which are able to react with metal sulfides. This review explores the bacterium's versatility in metal and elemental mobilization, with a focus on the mechanisms involved, encompassing its role in the recovery of industrially relevant elements from ores. The application of biomining technologies leveraging the bacterium's natural capabilities not only enhances element recovery efficiency, but also reduces reliance on conventional energy-intensive methods, aligning with the global trend towards more sustainable mining practices. However, its use in biometallurgical applications poses environmental issues through its effect on the pH levels in bioleaching systems, which produce acid mine drainage in rivers and lakes adjacent to mines. This dual effect underscores its potential to shape the future of responsible mining practices, including potentially in space, and highlights the importance of monitoring acidic releases in the environment.

An integrated microbiome- and metabolome-genome-wide association study reveals the role of heritable ruminal microbial carbohydrate metabolism in lactation performance in Holstein dairy cows

BACKGROUND

Despite the growing number of studies investigating the connection between host genetics and the rumen microbiota, there remains a dearth of systematic research exploring the composition, function, and metabolic traits of highly heritable rumen microbiota influenced by host genetics. Furthermore, the impact of these highly heritable subsets on lactation performance in cows remains unknown. To address this gap, we collected and analyzed whole-genome resequencing data, rumen metagenomes, rumen metabolomes and short-chain fatty acids (SCFAs) content, and lactation performance phenotypes from a cohort of 304 dairy cows.

RESULTS

The results indicated that the proportions of highly heritable subsets (h2 ≥ 0.2) of the rumen microbial composition (55%), function (39% KEGG and 28% CAZy), and metabolites (18%) decreased sequentially. Moreover, the highly heritable microbes can increase energy-corrected milk (ECM) production by reducing the rumen acetate/propionate ratio, according to the structural equation model (SEM) analysis (CFI = 0.898). Furthermore, the highly heritable enzymes involved in the SCFA synthesis metabolic pathway can promote the synthesis of propionate and inhibit the acetate synthesis. Next, the same significant SNP variants were used to integrate information from genome-wide association studies (GWASs), microbiome-GWASs, metabolome-GWASs, and microbiome-wide association studies (mWASs). The identified single nucleotide polymorphisms (SNPs) of rs43470227 and rs43472732 on SLC30A9 (Zn2+ transport) (P < 0.05/nSNPs) can affect the abundance of rumen microbes such as Prevotella_sp., Prevotella_sp._E15-22, Prevotella_sp._E13-27, which have the oligosaccharide-degradation enzymes genes, including the GH10, GH13, GH43, GH95, and GH115 families. The identified SNPs of chr25:11,177 on 5s_rRNA (small ribosomal RNA) (P < 0.05/nSNPs) were linked to ECM, the abundance alteration of Pseudobutyrivibrio_sp. (a genus that was also showed to be linked to the ECM production via the mWASs analysis), GH24 (lysozyme), and 9,10,13-TriHOME (linoleic acid metabolism). Moreover, ECM, and the abundances of Pseudobutyrivibrio sp., GH24, and 9,10,13-TRIHOME were significantly greater in the GG genotype than in the AG genotype at chr25:11,177 (P < 0.05). By further the SEM analysis, GH24 was positively correlated with Pseudobutyrivibrio sp., which was positively correlated with 9,10,13-triHOME and subsequently positively correlated with ECM (CFI = 0.942).

CONCLUSION

Our comprehensive study revealed the distinct heritability patterns of rumen microbial composition, function, and metabolism. Additionally, we shed light on the influence of host SNP variants on the rumen microbes with carbohydrate metabolism and their subsequent effects on lactation performance. Collectively, these findings offer compelling evidence for the host-microbe interactions, wherein cows actively modulate their rumen microbiota through SNP variants to regulate their own lactation performance. Video Abstract.

More than a contaminant: How zinc promotes carbonate-mineralizing bacteria metabolism and adaptation by reshaping precipitation conditions

Although microbial-induced carbonate precipitation (MICP) technology is both environmentally friendly and cost-effective, its efficiency is constrained by challenges such as low bacterial activity and heavy metal stress. This study explored the enhancement of mineralization efficiency by incorporating zinc (Zn) into the cultivation system of carbonate-mineralized bacteria. All Zn salts at a concentration of 30 μmol/L significantly enhanced the density and heavy metal resistance of bacterial cells, while also promoting CO2 hydration efficiency. The activities of urease and carbonic anhydrase (CA) were significantly elevated after treatment with 30 μmol/L ZnCl2 and Zn(C3H5O3)2 (ZnL) compared to the control. The results from qRT-PCR and ELISA confirmed that ZnL exhibited a stable biological effect on CA gene expression. Through the analysis of surface chemistry of cells and the subcellular distribution pattern of cadmium (Cd), it was observed that Zn supplementation maintained the cell surface stability and strengthened the cellular barrier against Cd uptake. SEM, FTIR and XRD results further confirmed that Zn supplementation significantly increased the complexity of the mineral morphology, resulting in a more stable crystal structure of CdCO3. This study offers additional theoretical and technical backing, opening a new avenue for the practical application of MICP technology in heavy metal remediation.

The Effects of Seed Inoculation with Bacterial Biofilm on the Growth and Elemental Composition of Tomato (Solanum lycopersicum L.) Cultivated on a Zinc-Contaminated Substrate

Biofilm obtained from Bacillus subtilis subsp. spizizenii inoculated on vegetable seeds has been shown to have plant growth-promoting capacity. Seed inoculation with biofilm produced by this strain could also reduce the adverse effects on plant growth caused by soil or substrate heavy metal overabundance. Therefore, the objective of this work was to evaluate the impact of biofilm inoculated on tomato (Solanum lycopersicum L.) seeds, which were planted on a substrate with artificially added zinc. First, seeds of the Río Grande tomato variety were exposed to increasing zinc concentrations, namely: 50, 100, 200, and 400 ppm, with and without bacterial biofilm inoculation. Zinc addition and seed inoculation affected germination parameters. For example, an extra 200 and 400 ppm of zinc led to high toxicity. Biofilm inoculation, however, reduced the noxious effects of excess zinc, bringing acute toxicity down to moderate. Then, tomato plants growing from inoculated and non-inoculated seeds were cropped for 4 months in both substrates with 400 ppm zinc and without added zinc. Extra zinc addition significantly (p < 0.05) reduced tomato root and shoot biomass, plant height, and fruit number at harvest time. However, seed biofilm inoculation avoided the harmful effect of zinc on plant growth parameters, fruit yield, and fruit quality. The roots and shoots of plants growing on contaminated substrates showed very noticeable increases in zinc levels compared to the control, while fruits only showed a much weaker zinc gain, even if this was significant (p < 0.05). Moreover, root shoot and fruit concentrations of elements other than zinc, (nitrogen, phosphorus, potassium, calcium, magnesium, sulfur, iron, manganese, copper, lead, and cadmium) were not or only weakly affected by the addition of this metal to the substrate. In summary, the biofilm of B. subtilis proved to be effective as a bioinoculant to alleviate negative effects on tomatoes cropped in a substrate with excess zinc.

Human and environmental risk assessment and plausible sources of toxic heavy metals at beach placers in southeast Sri Lanka

Beach placers are typically rich in heavy minerals, which are crucial for a wide range of industrial applications. This study investigates the human and environmental risks posed by toxic heavy metals (As, Pb, Zn, Cu, Cr, Fe, V and Mn) in beach placers of southeastern Sri Lanka using 42 X-ray fluorescence data. Risk indicators (EF, Igeo, CF and PLI) indicate the polluted nature of the placers. Correlation analysis (correlation matrix and HCA) identified pollution sources as heavy mineral-rich rocks, agricultural fertilizers, pesticides and municipal wastes. The environmental impact caused by toxic metals is less in placers. The highest non-carcinogenic risks (HI) resulted by Cr (1.69E+00), V (4.29E+00) and Fe (2.06E+00) to children. The total cancer risk of As and Cr in placers is unacceptable (children: 2.60E-04, 2.48E-03, and adults: 3.14E-05, 2.87E-04, respectively). Different strategies are introduced to mitigate the identified risks in source areas and the coastal environment.

Study on the Enhanced Degradable Rate of the Zn-0.4Li Alloys as Biodegradable Implants by Anodization

Biodegradable Zn-0.4Li alloys have been considered as medical implants due to their excellent mechanical properties and desirable biocompatibility. In this work, anodization was applied to modified corrosion resistance of the Zn-0.4Li alloy by forming a uniform and neat flower-like nanowire coating on the surface. After anodization for 7 min, the anodized Zn-0.4Li alloy had a yield strength of 253.6 MPa, ultimate tensile strength of 389.5 MPa, and elongation at a break of 66.0%. The corrosion rate of the Zn-0.4Li-7 min sample reached 0.5741 mm/y in the SBF, which was almost 18 times higher than that of the Zn-0.4Li alloy. The anodized Zn-0.4Li alloy exhibited higher antibacterial properties than that of the Zn-0.4Li alloy against Escherichia coli and Staphylococcus aureus. These results suggested that anodization may be an effective method to modulate the corrosion behavior of zinc alloys, which can be applied in the surface modification of biodegradable implants.

Environmental and human health risk of potentially toxic metals in freshwater and brackish water Nile tilapia (Oreochromis niloticus) aquaculture

Tilapia aquaculture is rapidly expanding worldwide, particularly in Bangladesh. However, metal pollution in aquaculture presents significant environmental and human health risks. This study aimed to evaluate the concentrations of 13 potentially toxic metals (As, Be, Cd, Co, Cr, Cu, Hg, Ni, Pb, V, Mn, Se, and Zn) in Nile tilapia (Oreochromis niloticus), surface water, and sediment from freshwater and brackish water aquaculture ponds. The study also assessed the associated environmental and human health risks. Samples of tilapia, water, and sediment were collected between October and November 2021 and analyzed using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). The estimated daily intake (EDI) of As, Cr, Pb, Se, and Zn in tilapia muscle of both freshwater and brackish water, as well as Cd and Ni in brackish water, exceeded recommended EDI values. The Target Hazard Quotient (THQ) was less than 1 for most metals, except for As in brackish water tilapia and Cr in both freshwater and brackish water tilapia, indicating potential health risks. The Target Cancer Risk (TR) values for As in both freshwater and brackish water tilapia, and for Cr and Ni in freshwater tilapia, exceeded acceptable ranges. While the concentrations of metals in surface water of both freshwater and brackish water tilapia farms varied, all mean concentrations were below WHO recommended limits. The contamination factor (Cf) values were less than 1 for all metals in both types of aquaculture ponds, except for Zn in freshwater sediment and Se in brackish water sediment. Additionally, the calculated risk indices including the Pollution Load Index (PLI), Geoaccumulation Index (Igeo), Ecological Risk Factor (Er), and Potential Ecological Risk Factor (PER) for sediment were below the risk thresholds values (PLI < 1, Igeo < 0, Er < 40, and PER < 150). The significant positive correlations were found between tilapia muscle and the sediment of the respective ponds for arsenic (As) (ρ= 0.8, p<0.002) and Cr (ρ= 0.7, p<0.02). Although the levels of studied metals in water and sediment from freshwater and brackish water aquaculture ponds were generally within recommended guidelines, this study underscores the need for continuous monitoring and preventative measures, particularly to address elevated levels of As and Cr in tilapia muscle, which may pose potential risks to human health.

Polyamines: Rising stars against metal and metalloid toxicity

Globally, metal/metalloid(s) soil contamination is a persistent issue that affects the atmosphere, soil, water and plant health in today's industrialised world. However, an overabundance of these transition ions promotes the excessive buildup of reactive oxygen species (ROS) and ion imbalance, which harms agricultural productivity. Plants employ several strategies to overcome their negative effects, including hyperaccumulation, tolerance, exclusion, and chelation with organic molecules. Polyamines (PAs) are the organic compounds that act as chelating agents and modulate various physiological, biochemical, and molecular processes under metal/metalloid(s) stress. Their catabolic products, including H2O2 and gamma amino butyric acid (GABA), are also crucial signalling molecules in abiotic stress situations, particularly under metal/metalloid(s) stress. In this review, we explained how PAs regulate genes and enzymes, particularly under metal/metalloid(s) stress with a specific focus on arsenic (As), boron (B), cadmium (Cd), chromium (Cr), and zinc (Zn). The PAs regulate various plant stress responses by crosstalking with other plant hormones, upregulating phytochelatin, and metallothionein synthesis, modulating stomatal closure and antioxidant capacity. This review presents valuable insights into how PAs use a variety of tactics to reduce the harmful effects of metal/metalloid(s) through multifaceted strategies.

Variation in the sensitivity of intestine and skin of Bufo gargarizans and Rana chensinensis tadpoles in relation to zinc exposure

Zinc (Zn) contaminants in the aquatic environment have an intricate impact on amphibians. Amphibian gut and skin microbiota are participated in regulating their normal physiological functions. Here, we investigated the effects of Zn on the gut and skin tissues and microbiota of Bufo gargarizans and Rana chensinensis tadpoles using histological methods and 16S rRNA sequencing technology. Our results showed a decrease in the height of enterocytes and skin epithelial cells after Zn treatment. Furthermore, Zn exposure elicited alterations in the composition and structure of the gut and skin microbiota at the phylum and genus levels in Bufo gargarizans and Rana chensinensis tadpoles. The feature predictions revealed an elevation in the abundance of potentially pathogenic bacteria and stress-tolerant bacteria in the gut and skin of both tadpoles after zinc exposure. We also speculated that microbiota from various species and organs exhibit varying degrees of sensitivity to zinc based on the functional predictions results. In the context of increasing environmental pollution and the global amphibians decline, our research enriches the current understanding of effects of zinc on amphibian microbiota and provides new framework for artificial breeding and amphibian conservation.

Enhancement of the germination and growth of Panicum miliaceum and Brassica juncea in Cd- and Zn-contaminated soil inoculated with heavy-metal-tolerant Leifsonia sp. ZP3

The addition of plant-growth-promoting bacteria (PGPB) to heavy-metal-contaminated soils can significantly improve plant growth and productivity. This study isolated heavy-metal-tolerant bacteria with growth-promoting traits and investigated their inoculation effects on the germination rates and growth of millet (Panicum miliaceum) and mustard (Brassica juncea) in Cd- and Zn-contaminated soil. Leifsonia sp. ZP3, which is resistant to Cd (0.5 mM) and Zn (1 mM), was isolated from forest soil. The ZP3 strain exhibited plant-growth-promoting activity, including indole-3-acetic acid production, phosphate solubilization, catalase activity, and 2,2-diphenyl-1-picrylhydrazyl radical scavenging. In soil contaminated with low concentrations of Cd (0.232 ± 0.006 mM) and Zn (6.376 ± 0.256 mM), ZP3 inoculation significantly increased the germination rates of millet and mustard 8.35- and 31.60-fold, respectively, compared to the non-inoculated control group, while the shoot and root lengths of millet increased 1.77- and 4.44-fold (p < 0.05). The chlorophyll content and seedling vigor index were also 4.40 and 18.78 times higher in the ZP3-treated group than in the control group (p < 0.05). The shoot length of mustard increased 1.89-fold, and the seedling vigor index improved 53.11-fold with the addition of ZP3 to the contaminated soil (p < 0.05). In soil contaminated with high concentrations of Cd and Zn (0.327 ± 0.016 and 8.448 ± 0.250 mM, respectively), ZP3 inoculation led to a 1.98-fold increase in the shoot length and a 2.07-fold improvement in the seedling vigor index compared to the control (p < 0.05). The heavy-metal-tolerant bacterium ZP3 isolated in this study thus represents a promising microbial resource for improving the efficiency of phytoremediation in Cd- and Zn-contaminated soil.

Contamination and risk assessment of heavy metals in water and fish obtained in Bunza River in Kebbi State, Nigeria

Background: Fish are consumed worldwide due to their nutritional and health benefits; however, heavy metal pollution is compromising their safety. This study aimed to determine heavy metal safety in water and fish, specifically tilapia (Oreochromis niloticus) and catfish (Clarias gariepinus), collected from Bunza River in Kebbi State, Nigeria. Methods: Water and fish samples underwent analysis for zinc (Zn), cadmium (Cd), copper (Cu), and lead (Pb) using atomic absorption spectroscopy. The obtained values were then utilized to assess the associated health risks. Results: The atomic absorption spectroscopy of fish revealed significant differences (P<0.05) between heavy metal concentrations in the fish organs and FAO/WHO standards. It indicated non-tolerable concentrations of copper (1.77-5.24 mg kg-1) and lead (1.85-4.53 mg kg-1). The estimated daily intake (EDI) of Pb and Cd through fish consumption was above the recommended daily intake (RDI). However, the hazard quotient (HQ) and health risk index (HI) of all the heavy metals were within tolerable limits (<1). On water samples, non-tolerable levels of the heavy metals and significant differences (P<0.05) were observed when compared with the standards. The water samples had average concentrations of Cu (4.64±0.62 mg kg-1), Pb (1.78±0.70 mg kg-1), Cd (0.50±0.02 mg kg-1), and Zn (18.90±3.08 mg kg-1). The average daily ingestion (ADI) and HQ of the heavy metals through the consumption of the water were above the recommended limits. Conclusion: Based on the results, the fish and water samples could cause heavy metal-related toxicity. There is a need for policies aimed at decontaminating the river.

Towards prolonging ovarian reproductive life: Insights into trace elements homeostasis

Ovarian aging is marked by a reduction in the quantity and quality of ovarian follicles, leading to a decline in female fertility and ovarian endocrine function. While the biological characteristics of ovarian aging are well-established, the exact mechanisms underlying this process remain elusive. Recent studies underscore the vital role of trace elements (TEs) in maintaining ovarian function. Imbalances in TEs can lead to ovarian aging, characterized by reduced enzyme activity, hormonal imbalances, ovulatory disorders, and decreased fertility. A comprehensive understanding of the relationship between systemic and cellular TEs balance and ovarian aging is critical for developing treatments to delay aging and manage age-related conditions. This review consolidates current insights into TEs homeostasis and its impact on ovarian aging, assesses how altered TEs metabolism affects ovarian aging, and suggests future research directions to prolong ovarian reproductive life. These studies are expected to offer novel approaches for mitigating ovarian aging.

A comprehensive comparative genomic analysis revealed that plant growth promoting traits are ubiquitous in strains of Stenotrophomonas

Stenotrophomonas strains, which are often described as plant growth promoting (PGP) bacteria, are ubiquitous in many environments. A total of 213 genomes of strains of Stenotrophomonas were analyzed using comparative genomics to better understand the ecological roles of these bacteria in the environment. The pan-genome of the 213 strains of Stenotrophomonas consists of 27,186 gene families, including 710 core gene families, 11,039 unique genes and 15,437 accessory genes. Nearly all strains of Stenotrophomonas harbor the genes for GH3-family cellulose degradation and GH2- and GH31-family hemicellulose hydrolase, as well as intact glycolysis and tricarboxylic acid cycle pathways. These abilities suggest that the strains of this genus can easily obtain carbon and energy from the environment. The Stenotrophomonas strains can respond to oxidative stress by synthesizing catalase, superoxide dismutase, methionine sulfoxide reductase, and disulfide isomerase, as well as managing their osmotic balance by accumulating potassium and synthesizing compatible solutes, such as betaine, trehalose, glutamate, and proline. Each Stenotrophomonas strain also contains many genes for resistance to antibiotics and heavy metals. These genes that mediate stress tolerance increase the ability of Stenotrophomonas strains to survive in extreme environments. In addition, many functional genes related to attachment and plant colonization, growth promotion and biocontrol were identified. In detail, the genes associated with flagellar assembly, motility, chemotaxis and biofilm formation enable the strains of Stenotrophomonas to effectively colonize host plants. The presence of genes for phosphate-solubilization and siderophore production and the polyamine, indole-3-acetic acid, and cytokinin biosynthetic pathways confer the ability to promote plant growth. These strains can produce antimicrobial compounds, chitinases, lipases and proteases. Each Stenotrophomonas genome contained 1-9 prophages and 17-60 genomic islands, and the genes related to antibiotic and heavy metal resistance and the biosynthesis of polyamines, indole-3-acetic acid, and cytokinin may be acquired by horizontal gene transfer. This study demonstrates that strains of Stenotrophomonas are highly adaptable for different environments and have strong potential for use as plant growth-promoting bacteria.

Glycyl-l-histidyl-l-lysine prevents copper- and zinc-induced protein aggregation and central nervous system cell death in vitro

Common features of neurodegenerative diseases are oxidative and inflammatory imbalances as well as the misfolding of proteins. An excess of free metal ions can be pathological and contribute to cell death, but only copper and zinc strongly promote protein aggregation. Herein we demonstrate that the endogenous copper-binding tripeptide glycyl-l-histidyl-l-lysine (GHK) has the ability to bind to and reduce copper redox activity and to prevent copper- and zinc-induced cell death in vitro. In addition, GHK prevents copper- and zinc-induced bovine serum albumin aggregation and reverses aggregation through resolubilizing the protein. We further demonstrate the enhanced toxicity of copper during inflammation and the ability of GHK to attenuate this toxicity. Finally, we investigated the effects of copper on enhancing paraquat toxicity and report a protective effect of GHK. We therefore conclude that GHK has potential as a cytoprotective compound with regard to copper and zinc toxicity, with positive effects on protein solubility and aggregation that warrant further investigation in the treatment of neurodegenerative diseases.

Oxidative Stress in Military Missions-Impact and Management Strategies: A Narrative Analysis

This narrative review comprehensively examines the impact of oxidative stress on military personnel, highlighting the crucial role of physical exercise and tailored diets, particularly the ketogenic diet, in minimizing this stress. Through a meticulous analysis of the recent literature, the study emphasizes how regular physical exercise not only enhances cardiovascular, cognitive, and musculoskeletal health but is also essential in neutralizing the effects of oxidative stress, thereby improving endurance and performance during long-term missions. Furthermore, the implementation of the ketogenic diet provides an efficient and consistent energy source through ketone bodies, tailored to the specific energy requirements of military activities, and significantly contributes to the reduction in reactive oxygen species production, thus protecting against cellular deterioration under extreme stress. The study also underlines the importance of integrating advanced technologies, such as wearable devices and smart sensors that allow for the precise and real-time monitoring of oxidative stress and physiological responses, thus facilitating the customization of training and nutritional regimes. Observations from this review emphasize significant variability among individuals in responses to oxidative stress, highlighting the need for a personalized approach in formulating intervention strategies. It is crucial to develop and implement well-monitored, personalized supplementation protocols to ensure that each member of the military personnel receives a regimen tailored to their specific needs, thereby maximizing the effectiveness of measures to combat oxidative stress. This analysis makes a valuable contribution to the specialized literature, proposing a detailed framework for addressing oxidative stress in the armed forces and opening new directions for future research with the aim of optimizing clinical practices and improving the health and performance of military personnel under stress and specific challenges of the military field.

The Scope of the Applicability of Non-relativistic DFT Calculations of NMR Chemical Shifts in Pyridine-Metal Complexes for Applied Applications

Heavy metals are toxic, but it is impossible to stop using them. Considering the variety of molecular systems in which they can be present, the multicomponent nature and disorder of the structure of such systems, one of the most effective methods for studying them is NMR spectroscopy. This determines the need to calculate NMR chemical shifts for expected model systems. For elements beyond the third row of the periodic table, corrections for relativistic effects are necessary when calculating NMR parameters. Such corrections may be necessary even for light atoms due to the shielding effect of a neighboring heavy atom. This work examines the extent to which non-relativistic DFT calculations are able to reproduce experimental 15N and 113Cd NMR chemical shift tensors in pyridine-metal coordination complexes. It is shown that while for the calculation of 15N NMR chemical shift tensors there is no real need to consider relativistic corrections, for 113Cd, on the contrary, none of the tested calculation methods could reproduce the experimentally obtained tensor to any extent correctly.

Optimization of simultaneous adsorption of nickel, copper, cadmium and zinc from sulfuric solutions using weakly acidic resins

In this research, the adsorption of nickel (Ni), copper (Cu), cadmium (Cd), and zinc (Zn) from real sulfuric leaching solution with weakly acidic resins has been studied using response surface methodology (RSM). The adsorption process on two weakly acidic resins has been investigated as a function of pH, time, temperature, and resin dosage. The experimental results indicate that the amino phosphoric acid resin removed Ni, Cu, Cd, and Zn from an acidic solution very efficiently. Based on the central composite design (CCD) on the RSM, the statistical criteria of correlation coefficient (R2) values of Ni, Cu, Cd, and Zn are 0.9418, 0.9753, 0.9657, and 0.9189, respectively. The adsorption process followed the pseudo-second-order kinetic model and the thermodynamic calculations indicated the chemical interaction between the resin surface and the metal ions. Enthalpy values greater than zero indicate that the adsorption reaction of the metals is endothermic. The optimal adsorption process was carried out at time of 20 min, temperature of 30 0C, pH of 5, and resin dosage of 4 g/L. In these conditions, the adsorption capacity of nickel, copper, cadmium, and zinc were obtained 13.408, 7.087, 4.357, and 15.040 mg/g, respectively.

Study of Cytotoxic and Antibacterial Activity of Ag- and Mg-Dual-Doped ZnO Nanoparticles

A non-laborious process for the fabrication of silver and magnesium dual doped zinc oxide nanoparticles (Ag/Mg-ZnO NP) is described. The wurtzite ZnO nano-structures and the dual doped NP were analyzed by PXRD. SEM data showed the hexagonal morphology of our product, while the gathered anti-bacterial outcomes towards Streptococcus mutans bacteria through micro-dilution technic affirmed the enhanced performance of doped NP compared to the native ones. Furthermore, we gauged the toxic impacts of synthesized pure and Ag/Mg-ZnO NP against a breast cancer (MDA-MB-231) cell line through an MTT trial, which highlighted the superiority of the doped when compared to the native nanoparticles. In light of these comparisons, the applicability of Ag/Mg-ZnO NP in dental and medical science is proposed.

Associations of urinary zinc exposure with blood lipid profiles and dyslipidemia: Mediating effect of serum uric acid

The relationship between zinc (Zn) exposure and abnormal blood lipids including dyslipidemia is contentious. Serum uric acid (SUA) has been reported to be correlated to both Zn exposure and dyslipidemia. The underlying mechanisms of Zn exposure associated with blood lipids and the mediating effects of SUA remain unclear. Therefore, this study analyzed the data from Chinese 2110 adults (mean age: 59.0 years old) in rural areas across China to explore the associations of Zn exposure with blood lipid profiles and dyslipidemia, and to further estimate the mediating effects of SUA in these relationships. The study data showed that urinary Zn was associated with increased levels of blood lipid components triglyceride (TG) and low-density lipoprotein cholesterol (LDL-C). Moreover, an increased risk of dyslipidemia was observed in the study participants who had higher urinary Zn levels. Compared with the first quartile, the fourth quartile of urinary Zn concentration corresponded to the increase of TG (β = 0.20, 95 % CI: 0.12, 0.28), LDL-C (β = 0.06, 95 % CI: 0.01, 0.10) and dyslipidemia risk (OR = 2.16, 95 % CI: 1.50, 3.10), respectively. Elevated urinary Zn was also associated with higher levels of SUA and hyperuricemia risk. The SUA levels were positively related to total cholesterol (TC), TG, LDL-C levels and dyslipidemia risk. Mediation analyses revealed that SUA mediated 31.75 %, 46.16 % and 19.25 % of the associations of urinary Zn with TG, LDL-C levels and dyslipidemia risk, respectively. The subgroup and sensitivity analyses confirmed the positive associations between urinary Zn and blood lipid profiles and the mediating effect of SUA. The national population-based study further enhanced our understanding of the associations between Zn exposure and blood lipid profiles and mediating effect of SUA among generally healthy, middle-aged, and elderly individuals.

A Review about the Mycoremediation of Soil Impacted by War-like Activities: Challenges and Gaps

(1) Background: The frequency and intensity of war-like activities (war, military training, and shooting ranges) worldwide cause soil pollution by metals, metalloids, explosives, radionuclides, and herbicides. Despite this environmentally worrying scenario, soil decontamination in former war zones almost always involves incineration. Nevertheless, this practice is expensive, and its efficiency is suitable only for organic pollutants. Therefore, treating soils polluted by wars requires efficient and economically viable alternatives. In this sense, this manuscript reviews the status and knowledge gaps of mycoremediation. (2) Methods: The literature review consisted of searches on ScienceDirect and Web of Science for articles (1980 to 2023) on the mycoremediation of soils containing pollutants derived from war-like activities. (3) Results: This review highlighted that mycoremediation has many successful applications for removing all pollutants of war-like activities. However, the mycoremediation of soils in former war zones and those impacted by military training and shooting ranges is still very incipient, with most applications emphasizing explosives. (4) Conclusion: The mycoremediation of soils from conflict zones is an entirely open field of research, and the main challenge is to optimize experimental conditions on a field scale.

Assessing phytotoxicity and tolerance levels of ZnO nanoparticles on Raphanus sativus: implications for widespread adoptions

The escalating release of zinc oxide nanoparticles (ZnO NPs) into the environment poses a substantial threat, potentially leading to increased concentrations of zinc (Zn) in the soil and subsequent phytotoxic effects. This study aimed to assess the effects of ZnO NPs on Raphanus sativus (R. sativus) concerning its tolerance levels, toxicity, and accumulation. ZnO NPs were synthesized by the wet chemical method and characterized by powder X-ray diffraction (PXRD), Fourier-transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-vis) spectroscopy, dynamic light scattering (DLS), and scanning electron microscopy (SEM). The effect of ZnO NPs (70 nm) on R. sativus grown in coir was evaluated. The application of 1,000 mg/L of ZnO NPs resulted in a significant increase (p < 0.05) in soluble protein content, carbohydrates, chlorophyll a (Chl-a), chlorophyll b (Chl-b), total chlorophylls, carotenoids, and antioxidants by 24.7%, 58.5%, 38.0%, 42.2%, 39.9%, 11.2%, and 7.7%, respectively. Interestingly, this dose had no impact on the indole acetic acid (IAA) content. Conversely, the use of 2,000 mg/L of ZnO NPs in the same medium led to a significant reduction (p < 0.05) in soluble protein content by 23.1%, accompanied by a notable increase in IAA by 31.1%, indicating potential toxicity. The use of atomic absorption spectroscopy confirmed the internalization of zinc in seedlings, with a statistically significant increase (p < 0.05). In control plants without ZnO NPs, Zn concentration was 0.36 mg/g, while at the highest ZnO NPs tested dose of 10,000 mg/L, it significantly rose to 1.76 mg/g, causing leaf chlorosis and stunted seedling growth. This suggests potential health risks related to Zn toxicity for consumers. Given the adverse effects on R. sativus at concentrations above 1000 mg/L, caution is advised in the application and release of ZnO NPs, highlighting the importance of responsible practices to mitigate harm to plant life and consumer health. The study demonstrated the tolerance of R. sativus to high Zn levels, classifying it as a Zn-tolerant species.

Optimization of atmospheric leaching parameters for cadmium and zinc recovery from low-grade waste by response surface methodology (RSM)

This study is focused on the optimization of effective parameters on Cadmium and Zinc recovery by atmospheric acid leaching of low-grade waste by response surface methodology (RSM) and using the Central Composite Design (CCD) method. The effects of parameters including time (0.5-2.5 h), temperature (40-80 °C), solid/liquid (S/L) (0.05-0.09 g/cc), particle size (174-44 mic), oxygen injection (0-1%) and pH (0.5-4.5) were statistically investigated at 5 surfaces. The sample of low-grade waste used in this study was mainly zinc factory waste. Two quadratic models for the correlation of independent parameters for the maximum recovery were proposed. The properties of waste were evaluated by X-ray diffraction (XRD) and X-ray fluorescence (XRF). Atomic absorption spectroscopy was used to determine the amount of Cadmium and Zinc in the leaching solution. The correlation coefficient (R2) for the predicted and experimental data of Cadmium and Zinc are 0.9837 and 0.9368, respectively. Time, S/L and size were the most effective parameters for the recovery efficiency of cadmium and zinc. 75.05% of Cadmium and 86.13% of Zinc were recovered in optimal conditions of leaching: S/L 0.08, pH 2.5, size 88 µm, 70 °C and 2.5 h. with air injection.

Environmental fate of aquatic pollutants and their mitigation by phycoremediation for the clean and sustainable environment: A review

Emerging pollutants such as natural and manufactured chemicals, insecticides, pesticides, surfactants, and other biological agents such as personal care products, cosmetics, pharmaceuticals, and many industrial discharges hamper the aquatic environment. Nanomaterials and microplastics, among the categories of pollutants, can directly interfere with the marine ecosystem and translate into deleterious effects for humans and animals. They are either uncontrolled or poorly governed. Due to their known or suspected effects on human and environmental health, some chemicals are currently causing concern. The aquatic ecology is at risk from these toxins, which have spread worldwide. This review assesses the prevalence of emerging and hazardous pollutants that have effects on aquatic ecosystems and contaminated water bodies and their toxicity to non-target organisms. Microalgae are found to be a suitable source to remediate the above-mentioned risks. Microalgae based mitigation techniques are currently emerging approaches for all such contaminants, including the other categories that are discussed above. These studies describe the mechanism of phycoremediation, provide outrage factors that may significantly affect the efficiency of contaminants removal, and discuss the future directions and challenges of microalgal mediated remediations.

Heavy metal resistance in the Yanomami and Tunapuco microbiome

BACKGROUND

The Amazon Region hosts invaluable and unique biodiversity as well as mineral resources. Consequently, large illegal and artisanal gold mining areas exist in indigenous territories. Mercury has been used in gold mining, and some has been released into the environment and atmosphere, primarily affecting indigenous people such as the Yanomami. In addition, other heavy metals have been associated with gold mining and other metal-dispersing activities in the region.

OBJECTIVE

Investigate the gut microbiome of two semi-isolated groups from the Amazon, focusing on metal resistance.

METHODS

Metagenomic data from the Yanomami and Tunapuco gut microbiome were assembled into contigs, and their putative proteins were searched against a database of metal resistance proteins.

FINDINGS

Proteins associated with mercury resistance were exclusive in the Yanomami, while proteins associated with silver resistance were exclusive in the Tunapuco. Both groups share 77 non-redundant metal resistance (MR) proteins, mostly associated with multi-MR and operons with potential resistance to arsenic, nickel, zinc, copper, copper/silver, and cobalt/nickel. Although both groups harbour operons related to copper resistance, only the Tunapuco group had the pco operon.

CONCLUSION

The Yanomami and Tunapuco gut microbiome shows that these people have been exposed directly or indirectly to distinct scenarios concerning heavy metals.

Community ecological study on the reduction of soil antimony bioavailability by SRB-based remediation technologies

Sulfate-reducing bacteria (SRB) were effective in stabilizing Sb. However, the influence of electron donors and acceptors during SRB remediation, as well as the ecological principles involved, remained unclear. In this study, Desulfovibrio desulfuricans ATCC 7757 was utilized to stabilize soil Sb within microcosm. Humic acid (HA) or sodium sulfate (Na2SO4) were employed to enhance SRB capacity. The SRB+HA treatment exhibited the highest Sb stabilization rate, achieving 58.40%. Bacterial community analysis revealed that SRB altered soil bacterial diversity, community composition, and assembly processes, with homogeneous selection as the predominant assembly processes. When HA and Na2SO4 significantly modified the stimulated microbial community succession trajectories, shaped the taxonomic composition and interactions of the bacterial community, they showed converse effect in shaping bacterial community which were both helpful for promoting dissimilatory sulfate reduction. Na2SO4 facilitated SRB-mediated anaerobic reduction and promoted interactions between SRB and bacteria involved in nitrogen and sulfur cycling. The HA stimulated electron generation and storage, and enhanced the interactions between SRB and bacteria possessing heavy metal tolerance or carbohydrate degradation capabilities.

Development of a certified reference material for accurate determination of the leaching of Pb and Zn in solid waste

Certified reference materials (CRMs) with high accuracy and traceability play a significant role in the calibration of equipment and validation of analytical methods. However, there is still a lack of suitable solid waste CRMs for quality assurance and quality control. Thus, a CRM (GBW(E)085538) was developed for accurate determination and reliable measurement of the leaching of Pb and Zn in solid waste according to the requirements of ISO 17034 and the recommendations of ISO Guide 35. This study describes the steps performed for the development of the CRM. These steps include material preparation, homogeneity, and stability during transport and storage, assignment of certified values, and their uncertainties. The material was dried, ground, sieved and well-mixed, and the final bulk material was bottled in 1 kg portions. Analytical techniques like inductively coupled plasma-mass spectrometry (ICP-MS), inductively coupled plasma-optical emission spectrometry (ICP-OES), and flame atomic absorption spectrometry (AAS) have been used for the characterization of property values. Concurrently, an inter-laboratory comparison study involving 9 qualified laboratories was implemented to support the certification study. The certified values of Pb and Zn were (4.66 ± 0.21) mg/L and (2.95 ± 0.14) mg/L with 7-month stability.

Evaluating PM2.5 element concentration measurements for a nationwide monitoring network

Particulate matter (PM) concentrations have decreased dramatically over the past 20 years, thus lower method detection limits (MDL) are required for these measurements. Energy-dispersive X-ray fluorescence (XRF) spectroscopy is used to quantify multiple elements simultaneously in the U.S. Environmental Protection Agency (EPA) Chemical Speciation Network (CSN). Inductively-coupled plasma mass spectrometry (ICP-MS) is an alternative analysis with lower MDL for elements. Here, we present a side-by-side comparison of XRF and ICP-MS for elements in PM2.5 samples collected via the EPA's CSN. For ICP-MS, a simple extraction and ICP-MS analysis technique was applied to a wide variety of samples to minimize effort and cost and serve as a feasibility test for a large monitoring network. Filter samples (N = 549) from various urban locations across the US were analyzed first analyzed via XRF at UC Davis and then ICP-MS at RTI International. Both methods measured 29 of the same elements out of the 33 usually reported to CSN. Of these 29, 14 elements (Na, Mg, Al, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Pb) were found to be frequently detected (i.e. had more than 10% of values above both XRF and ICP-MS MDL). ICP-MS was found to have lower MDL for 26 out of 29 elements, namely Na, Mg, Al, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, As, Se, Rb, Sr, Zr, Ag, Cd, In, Sn, Sb, Cs, Ba, Ce, Pb; conversely, XRF had lower MDL for 3 elements, namely, P, K, Zn. Intra-method quality checks using (1) inter-elemental inspection of scatter plots using a priori knowledge of element sources and (2) scatter plots of routine versus collocated measurements reveal that ICP-MS exhibits better measurement precision. Lower detection limits for element measurements in nationwide PM monitoring networks would benefit human-health and source apportionment research.Implications: We demonstrate that ICP-MS with adilute-acid digestion method would significantly improve the element detection rates and thus be avaluable addition to the current analysis techniques for airborne PM samples in anationwide monitoring network. In this paper, we show that a hybrid method of elemental analysis for airborne particulate matter (PM) would significantly improve the detection rates for elements in PM. This would be a valuable addition to the current analysis techniques for airborne PM samples in nationwide and other large-scale monitoring networks, such as the EPA's Chemical Speciation Network (CSN). The techniques explored in this study (i.e., X-ray Fluorescence Spectroscopy or XRF and Inductively Coupled Plasma-Mass Spectrometry or ICP-MS) are relevant to the PM monitoring and regulatory community audience of JAWMA, especially agencies and states that are already involved in CSN. In addition, our results outline considerations that give insight on factors to consider for other large-scale and long-term ambient air monitoring efforts.

Effect of combined in ovo administration of zinc glycine chelate (Zn-Gly) and a multistrain probiotic on the modulation of cellular and humoral immune responses in broiler chickens

The aim of the study was to determine the effect of in ovo administration of zinc glycine chelate (Zn-Gly), and a multistrain probiotic on the hatchability and selected parameters of the cellular and humoral immune response of chickens. The study was conducted on 1,400 fertilized eggs from commercial broiler breeders (Ross x Ross 708). Material for the study consisted of peripheral blood and spleens of chicks taken 12 h and 7 d after hatching. The results showed that both combined and single in ovo administration of the multistrain probiotic and zinc glycine chelate significantly reduced hatchability of chicks. The flow cytometry study showed that the highest percentage of CD4+ T cells, CD4+CD25+, and high expression of KUL01 in the serum were obtained in the group supplemented with probiotic and Zn-Gly both 12 h and 7 d after hatching. In birds supplemented with probiotic and zinc chelate, a high percentage of TCRγδ+ cells was found in serum and spleen 12 h after hatching and in serum after 7 d. The percentage of Bu-1A+ lymphocytes in serum and spleen 12 h and 7 d after hatching was the highest in the group supplemented with probiotic and Zn-Gly. The highest expression of CD79A was observed in the group supplemented only with zinc chelate. There were no significant differences in the percentage of CD4+ cells in the spleens of birds in the groups receiving the multistrain probiotic at 12 h after hatching, and after 7 d, the percentage of CD4+ T cells was lower in the experimental groups than in the control group. The percentage of CD8+ cells in the serum of birds after hatching was lower in the group supplemented with multistrain probiotic and Zn-Gly than in the control group, but reached the highest value on d 7 after hatching. The obtained results confirm the strong effect of the combined administration of a multistrain probiotic and Zn-Gly chelate on lymphocyte proliferation and stimulation of cellular immune mechanisms in birds.

Silk Fibroin/ZnO Coated TiO2 Nanotubes for Improved Antimicrobial Effect of Ti Dental Implants

The aim of the present research is to develop a novel hybrid coating for a Ti dental implant that combines nature-inspired biomimetic polymers and TiO2 nanostructures with an entrapped ZnO antimicrobial agent. ZnO was used in other studies to cover the surface of Ti or Ti-Zr to reduce the need of clinical antibiotics, prevent the onset of peri-implantitis, and increase the success rate of oral clinical implantation. We developed an original coating that represents a promising approach in clinical dentistry. The titanium surface was first anodized to obtain TiO2 nanotubes (NT). Subsequently, on the NT surface, silk fibroin isolated from Bombyx mori cocoons was deposited as nanofibers using the electrospun technique. For an improved antibacterial effect, ZnO nanoparticles were incorporated in this biopolymer using three different methods. The surface properties of the newly created coatings were assessed to establish how they are influenced by the most important features: morphology, wettability, topography. The evaluation of stability by electrochemical methods in simulated physiological solutions was discussed more in detail, considering that it could bring necessary information related to the behavior of the implant material. All samples had improved roughness and hydrophilicity, as well as corrosion stability (with protection efficiency over 80%). The antibacterial test shows that the functional hybrid coating has good antibacterial activity because it can inhibit the proliferation of Staphylococcus aureus up to 53% and Enterococcus faecalis up to 55%. All Ti samples with the modified surface have proven superior properties compared with unmodified TiNT, which proved that they have the potential to be used as implant material in dentistry.

Causal relationship of genetically predicted circulating micronutrients levels with the risk of kidney stone disease: a Mendelian randomization study

Background

Current studies have reported conflicting associations between circulating micronutrient levels and kidney stone disease (KSD). We aimed to elucidate the causal relationship between circulating micronutrient levels and KSD by a two-sample Mendelian randomization (MR) analysis.

Methods

Total of 36 single nucleotide polymorphisms (SNPs) from published genome-wide association studies (GWAS) significantly associated with eight micronutrients (vitamin B12, folic acid, magnesium, iron, phosphorus, copper, zinc, and selenium) were used as instrumental variables. The GWAS summary data associated with KSD (8,060 cases and 301,094 controls) were obtained from the FinnGen consortium. Inverse variance weighted was the main MR analysis method. MR-Pleiotropy RESidual Sum and Outlier (MR-PRESSO), weighted median and MR-Egger were used to assess pleiotropy and heterogeneity.

Results

Genetically predicted circulating vitamin B12 and zinc levels were causally associated with the risk of KSD (vitamin B12: OR: 1.17, 95% CI: 1.04-1.32, p = 0.008; zinc: OR: 1.15, 95% CI: 1.03-1.28, p = 0.015). We found no evidence that other circulating micronutrients were associated with risk of KSD. p-value for Cochrane Q test, MR Egger intercept test, and MR-PRESSO were >0.05, indicating no significant heterogeneity or horizontal pleiotropy in this MR analysis.

Conclusion

Increasing circulating zinc levels may increase the risk of KSD. More studies are needed to provide evidence on whether genetically predicted circulating vitamin B12 and zinc levels are a risk factor for KSD.

Genetic Basis of Acinetobacter sp. K1 Adaptation Mechanisms to Extreme Environmental Conditions

Anthropogenic pollution often leads to the generation of technosols, technogenic soils with inhospitable conditions for all living organisms including microbiota. Aluminum production near Ziar nad Hronom (Slovakia) resulted in the creation of a highly alkaline and heavy-metal-rich brown mud landfill, from which a bacterial strain of a likely new species of the genus Acinetobacter, Acinetobacter sp. K1, was isolated. The whole-genome sequence analysis of this strain confirmed the presence of operon units enabling tolerance to the heavy metals copper, zinc, cobalt, cadmium, chromium, and metalloid arsenic, which are functionally active. Despite the predominance of plasmid-related sequences in the K1 genome, the results indicate that most of the resistance genes are chromosomally encoded. No significant alkali tolerance of Acinetobacter sp. K1 was observed in vitro, suggesting that community level mechanisms are responsible for the survival of this strain in the highly alkaline, brown mud bacterial community.