A Review on the Design and Hydration Properties of Natural Polymer-Based Hydrogels

Carboxylated cellulose nanocrystals in semi-interpenetrated network hydrogels and its application in water absorption and antibiotic removal

The water scarcity crisis is currently deepened by the presence of emerging contaminants, such as amoxicillin (AMX), threatening ecosystems and living beings due to their toxicity and bioaccumulation. Due to this, in the present study, superabsorbent hydrogels reinforced with oxidized cellulose nanocrystals (CCNC) were developed, forming semi-interpenetrated networks with poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS). The CCNCs were obtained by acid hydrolysis and subsequent chemical oxidation to introduce carboxylate groups with two different levels (low and high) of 200 mmol kg-1 (L-CCNC) and 677 mmol kg-1 (H-CCNC), respectively. The effective oxidation of the crystals was confirmed by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and X-ray diffraction, where this reaction did not affect their crystallinity, but reduced their thermal stability. While the obtained hydrogels were characterized chemically, thermally, morphologically and mechanically by FTIR, TGA, scanning electron microscopy, hydration and dynamic compression tests. The incorporation of CCNC to PAMPS increased the thermal stability and modified the surface area of the hydrogels. In addition, the maximum hydration capacity reached 4900 % for PAMPS hydrogels with 10 % H-CCNC, maintaining greater flexibility under compression. Finally, in AMX adsorption studies, parameters such as pH, contact time, initial AMX concentration and amount of adsorbent were evaluated. Achieving a maximum adsorption capacity of 136 mg g-1 with the possibility of reuse in three consecutive adsorption-desorption cycles. These findings highlight the potential of superabsorbent hydrogels reinforced with CCNC as sustainable materials for environmental applications.

Supramolecular Conductive Hydrogels With Homogeneous Ionic and Electronic Transport

Mechanically resilient hydrogels with ion-electron mixed transport properties effectively bridge biology with electronics. An ideal bioelectronic interface can be realized through introducing electronically conductive polymers into supramolecular hydrogels. However, inhomogeneous morphologies of conducting polymers, such as poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), have limited mechanical properties and ion-electron interactions. Here, supramolecular conductive hydrogels that possess homogeneous ionic and electronic transport are achieved. The materials demonstrate high toughness (620 kJ m-3), stretchability (>1000%), softness (10.5 kPa), and conductivity (5.8 S cm-1), which surpasses commonly used inhomogeneous PEDOT:PSS-based hydrogels. The homogeneous network leads to higher charge injection capacitance and lower skin impedance compared to commercial electrodes or commonly used inhomogeneous PEDOT:PSS conducting networks. This significant advance arises from the homogeneous incorporation of the hydrophilic self-doped conducting polymer S-PEDOT, which has polymerized within a supramolecular polymer network template mediated by high-binding affinity host-guest crosslinks. Furthermore, the compatibility of S-PEDOT with hydrophilic secondary networks enables the realization of fully dryable and reswellable electronic devices, facilitating reusability and improving their ease of handling. It is anticipated that achieving such material architectures will offer a promising new direction in future synthesis and implementation of conductive hydrogels in the field of bioelectronics.

Mechanisms and key factors influencing ulvan gelation

Ulvan, a sulfated polysaccharide extracted from the green seaweed Ulva, is composed primarily of rhamnose, xylose, glucuronic acid, iduronic acid, sulfate, with minor sugars such as mannose, galactose, and arabinose. Its linear structure features L-rhamnose-3-sulfate, D-glucuronic acid, L-iduronic acid, and D-xylose. Ulvan exhibits distinctive rheological properties, including shear-thinning and shear-thickening behaviors, which are crucial for its applications in biomedicine (e.g., drug delivery systems) and food science (e.g., gelling agents, functional ingredients). However, challenges persist, such as variability in mechanical stability, biocompatibility, and batch-to-batch inconsistencies resulting from extraction methods. This review comprehensively examines the gelation mechanisms of ulvan, focusing on cross-linking interactions (ionic bonding with multivalent cations) and non-cross-linking interactions (electrostatic forces and hydrogen bonding). It further reviews how both extrinsic factors (e.g., pH, concentration) and intrinsic factors (e.g., molecular weight, sulfation) influence gelation, thus advancing the potential of ulvan-based materials in biomedical and industrial applications.

Polymer Applied in Hydrogel Wound Dressing for Wound Healing: Modification/Functionalization Method and Design Strategies

Hydrogel wound dressings have emerged as a promising solution for wound healing due to their excellent mechanical and biochemical properties. Over recent years, there has been significant progress in expanding the variety of raw materials used for hydrogel formulation along with the development of advanced modification techniques and design approaches that enhance their performance. However, a comprehensive review encompassing diverse polymer modification strategies and design innovations for hydrogel dressings is still lacking in the literature. This review summarizes the use of natural polymers (e.g., chitosan, gelatin, sodium alginate, hyaluronic acid, and dextran) and synthetic polymers (e.g., poly(vinyl alcohol), polyethylene glycol, Pluronic F-127, poly(N-isopropylacrylamide), polyacrylamide, and polypeptides) in hydrogel wound dressings. We further explore the advantages and limitations of these polymers and discuss various modification strategies, including cationic modification, oxidative modification, double-bond modification, catechol modification, etc. The review also addresses design principles and synthesis methods, aligning polymer modifications with specific requirements in wound healing. Finally, we discuss future challenges and opportunities in the development of advanced hydrogel-based wound dressings.

Recent development in ozone-based starch modification: From generation methods to film applications

Starch holds significant potential in food industry applications; however, its practical utility is hindered by several limitations, including freeze-thaw instability, shear sensitivity, insolubility in organic solvents, high retrogradation, and the instability of its gels and pastes. Ozonation, an eco-friendly modification technique, effectively addresses these challenges by oxidizing starch molecules, introducing carbonyl and carboxyl functional groups, and partially cleaving glycosidic bonds. These structural modifications enhance the functional, mechanical, and barrier properties of starch, making it a promising material for biodegradable food packaging films. Additionally, ozone treatment improves key physicochemical properties such as gelatinization behavior, pasting characteristics, crystallinity, solubility, and viscosity. This review explores the application of gaseous and aqueous ozone in modifying various starch sources, including cassava, wheat, rice, corn, sago, and potato starches. Furthermore, it delineates different ozone generation methods, such as corona discharge, dielectric barrier discharge, and microwave ultraviolet (UV) systems. The impact of ozonation on starch structure, its functionalization for packaging films, and the challenges associated with scaling up industrial ozonation processes are critically discussed. Finally, this review provides recommendations for optimizing ozone-based starch modification and advancing innovative ozone generation technologies to enhance industrial feasibility and sustainable packaging solutions.

Bacterial cellulose and keratin reinforced PAM hydrogels for advanced dye removal: Insights from batch and QCM analyses

Industrial wastewater, particularly from textile industries, contains toxic dyes that require practical and sustainable removal technologies. Hydrogels are potential materials for this purpose due to their high water absorption capacity, but conventional designs suffer from poor mechanical strength and limited dye adsorption efficiency. In this study, we developed a bio-based hydrogel composite by reinforcing polyacrylamide (PAM) with bacterial cellulose (BC) and keratin intermediate filaments (KIF) derived from human hair. This hybrid material enhances both mechanical integrity and adsorption performance. Batch adsorption tests showed a high dye removal efficiency of 60 mg/g for methylene blue over 12 h. In contrast, QCM analysis demonstrated rapid adsorption equilibrium (15 s) under continuous flow conditions, confirming its potential for real-time wastewater treatment. The optimized 2 % KIF hydrogel achieved a compressive strength of 0.4 MPa, forming a porous structure that supports multiple adsorption-desorption cycles for reuse. Adsorption followed pseudo-second-order and Freundlich isotherm models, indicating a heterogeneous mechanism driven by electrostatic interactions and π-π stacking. By integrating sustainable biopolymers, this composite hydrogel overcomes traditional hydrogels' mechanical and functional limitations, offering an eco-friendly solution for continuous wastewater treatment and industrial dye removal.

Effect of glycerol diglycidyl ether crosslinker on pectin-starch blended pharmaceutical films

Pharmaceutical films can show versatility and biocompatibility. Pectin and starch blends crosslinked with glycerol diglycidyl ether (GDE) can improve the physicochemical properties of films. This study aimed to develop films with pectin and starch crosslinked with GDE. They were prepared by solvent evaporation technique, using different amounts of polymers and GDE. The total solids concentration was optimized to 5.0 % (w/w) and dried at 35 °C. Films were evaluated for thickness, density and by ATR-FTIR, TGA, DSC, tensile tests, swelling capacity, water vapor permeability, SEM and in-vitro cytotoxicity (Artemia salina, VERO and L-929 cells). The thickness of the crosslinked films was between 0.142 mm and 0.150 mm. ATR-FTIR analysis showed probable crosslinking between the polysaccharides and GDE. Thermal and mechanical analyses showed thermal stability below Tg for those crosslinked with GDE and improved mechanical strength. Crosslinked films absorbed more water at neutral pH than in acidic medium, indicating pH-dependent behavior. At neutral pH, they exhibited a hydrated structure with homogeneous pore distribution, while at acidic pH, the distribution was more heterogeneous and in lower quantity. The films were not cytotoxic. These results highlight the potential of GDE cross-linked pectin-starch films as a viable and innovative alternative for future pharmaceutical applications.

Recent Advances in Hydrogel-Based 3D Disease Modeling and Drug Screening Platforms

Three-dimensional (3D) disease modeling and drug screening systems have become important in tissue engineering, drug screening, and development. The newly developed systems support cell and extracellular matrix (ECM) interactions, which are necessary for the formation of the tissue or an accurate model of a disease. Hydrogels are favorable biomaterials due to their properties: biocompatibility, high swelling capacity, tunable viscosity, mechanical properties, and their ability to biomimic the structure and function of ECM. They have been used to model various diseases such as tumors, cancer diseases, neurodegenerative diseases, cardiac diseases, and cardiovascular diseases. Additive manufacturing approaches, such as 3D printing/bioprinting, stereolithography (SLA), selective laser sintering (SLS), and fused deposition modeling (FDM), enable the design of scaffolds with high precision; thus, increasing the accuracy of the disease models. In addition, the aforementioned methodologies improve the design of the hydrogel-based scaffolds, which resemble the complicated structure and intricate microenvironment of tissues or tumors, further advancing the development of therapeutic agents and strategies. Thus, 3D hydrogel-based disease models fabricated through additive manufacturing approaches provide an enhanced 3D microenvironment that empowers personalized medicine toward targeted therapeutics, in accordance with 3D drug screening platforms.

Chitosan-P407-PNIPAM hydrogel loaded with AgNPs/lipid complex for antibacterial, inflammation regulation and alveolar bone regeneration in periodontitis treatment

Periodontitis is an oral chronic inflammatory disease induced by pathogenic bacteria. Pathogens continuously activate immune cells to express a large number of pro-inflammatory factors and reactive oxygen species, eventually leading to periodontal tissue damage. Poor eradication of pathogenic bacteria, persistent inflammatory response and impaired periodontal tissue regeneration are the main challenges to control the progression of periodontitis. However, current clinical drug treatment fails to comprehensively address these issues. In this paper, a chitosan-P407-PNIPAM scaffold multi-crosslinked hydrogel (A/CQ-ML@Gel) encapsulating AgNPs and lipid complex (CQ-ML) is developed. This hydrogel shows thermo- and pH-sensitive properties, exhibits excellent injectability, high viscosity and reliable post-injection mechanical strength. A/CQ-ML@Gel possesses a significant antibacterial effect to Porphyromonas gingivalis after implantation, and then by virtue of the programmed release of quercetin microemulsion and caffeic acid phenethyl ester in CQ-ML, exerting excellent inflammation regulation and osteogenic differentiation of periodontal ligament stem cells. Notably, A/CQ-ML@Gel could activate mitophagy through PINK1/Parkin in inflammatory macrophages, thereby inhibiting the production of excess reactive oxygen species, ultimately reprogramming M1/M2 macrophages phenotype for inflammation suppression. In summary, we present an innovative insight into periodontal delivery system for trimodal synergistic therapy strategy in periodontitis.

Advancements in Injectable Hydrogels for Controlled Insulin Delivery: A Comprehensive Review of the Design, Properties and Therapeutic Applications for Diabetes and Its Complications

Glycemic management in diabetes patients remains heavily reliant on multiple daily insulin injections, which often leads to poor patient compliance and an elevated risk of hypoglycemia. To overcome these limitations, injectable hydrogels capable of encapsulating insulin within polymeric networks have emerged as a promising alternative. Ideally, a single injection can form an in situ depot that allows prolonged glycemic control and lower injection frequency. This review summarizes recent advances in injectable hydrogels for controlled insulin delivery, focusing on the polymer sources, crosslinking strategies, and stimuli-responsive release mechanisms. Synthetic polymers such as PEG, PNIPAM, and Pluronics dominate the current research due to their highly tunable properties, whereas naturally derived polysaccharides and proteins generally require further modifications for enhanced functionality. The crosslinking types, ranging from relatively weak physical interactions (hydrogen bonds, hydrophobic interactions, etc.) to dynamic covalent bonds with higher binding strength (e.g., Schiff base, phenylboronate ester), significantly influence the shear-thinning behavior and stimuli-responsiveness of hydrogel systems. Hydrogels' responsiveness to temperature, glucose, pH, and reactive oxygen species has enabled more precise insulin release, offering new options for improved diabetic management. Beyond glycemic regulation, this review also explores insulin-loaded hydrogels for treating complications. Despite the progress, challenges such as burst release, long-term biocompatibility, and scalability remain. Future research should focus on optimizing hydrogel design, supported by robust and comprehensive data.

Bioengineered Injectable Hydrogel Based on the Dentin Extracellular Matrix and Chitosan

The extracellular matrix of dentin contains macromolecules of biological value that make it a natural source for the prospection of novel smart biomaterials. Here, we described the development of an injectable thermosensitive smart hydrogel resulting from the blending of insoluble macromolecules of the dentin matrix and chitosan. The extrudability and gelation parameters of the prehydrogel were optimized by varying the concentration of individual components. Three-dimensional constructs were fabricated upon injection of the prehydrogel into custom-made molds, followed by incubation at 37 °C. Specimens were characterized for spectral, physical, morphological, mechanical, and biocompatibility features. Fourier-transform infrared (FTIR) analyses confirmed the integration of the dentin organic matrix and chitosan. The degree of porosity of constructs was ∼51%. The water diffusion of constructs reached a plateau after 2 days. Their moduli of elasticity were at a low MPa order, decreasing after storage in simulated body fluid (SBF). The biodegradability of constructs rose following incubation in SBF containing lysozyme or zinc ions. Hydrogel bioactivity was confirmed by FTIR and ultramorphologically suggested by surface precipitates. Hydrogel constructs were shown to be biocompatible with undifferentiated pulp cells (OD-21). Overall, the novel engineered injectable hydrogel based on dentin extracellular macromolecules and chitosan holds promising features for use as a scaffold for the regeneration of damaged load-bearing tissues like dentin and bone.

Controlling the drug delivery efficiency of chitosan-based systems through silver nanoparticles and oxygen plasma

Today, curcumin's therapeutic properties are used in drug delivery systems. In this work, chitosan (CS) /Montmorillonite (MMT) hydrogels were synthesized to improve the performance of curcumin molecules. According to the results, drug release characteristics of CS/MMT/curcumin highly depend on the pH of the environment and properties of Ag nanoparticles. Moreover, curcumin and Ag nanoparticles were placed under the influence of oxygen plasma. Our results indicate that oxygen plasma, as a simple, clean, and environment-friendly method, can be used as an effective method for controlling the efficiency of drug release and antibacterial characteristics of curcumin molecules in hydrogels. In this case, by increasing the exposure time of the samples under the influence of oxygen plasma, their antibacterial properties and drug release efficiency are significantly enhanced.

Evaluation of the antibacterial properties of four bioactive biomaterials for chronic wound management

AIM

Chronic wound infections present a prevalent medical issue and a multifaceted problem that significantly impacts healthcare systems worldwide. Biofilms formed by pathogenic bacteria are fundamental virulence factors implicated in the complexity and persistence of bacterial-associated wound infections, leading to prolonged recovery times and increased risk of infection. This study aims to investigate the antibacterial effectiveness of commonly employed bioactive wound healing compositions with a particular emphasis on their effectiveness against common bacterial pathogens encountered in chronic wounds - Staphylococcus epidermidis, Escherichia coli, and Pseudomonas aeruginosa to identify optimal wound product composition for managing chronic wound infections.

METHODS

This study tested the antibacterial and antibiofilm effectiveness of four bioactive wound healing materials by performing in vitro antibacterial assays and measuring ion release profiles.

RESULTS

The anti-biofilm effectiveness differed extensively among the biomaterials tested and slightly among the bacterial species. Particularly, copper and zinc-doped borate bioactive glass wound healing compositions inhibited the three clinically relevant bacteria in both planktonic and biofilm forms, which were found to be ascribed to the copper and zinc gradual release.

CONCLUSION

The findings suggest that copper and zinc-doped bioactive glasses hold great promise for improving chronic wound management by providing strong antibacterial action and promoting faster healing.

Development and application of hydrogels in pathogenic bacteria detection in foods

Hydrogels are 3D networks of water-swollen hydrophilic polymers. It possesses unique properties (e.g., carrying biorecognition elements and creating a micro-environment) that make it highly suitable for bacteria detection (e.g., expedited and effective bacteria detection) and mitigation of bacterial contamination in specific environments (e.g., food systems). This study first introduces the materials used to create hydrogels for bacteria detection and the mechanisms for detection. We also summarize different hydrogel-based detection methods that rely on external stimuli and biorecognition elements, such as enzymes, temperature, pH, antibodies, and oligonucleotides. Subsequently, a range of widely utilized bacterial detection technologies were discussed where recently hydrogels are being used. These modifications allow for precise, real-time diagnostics across varied food matrices, responding effectively to industry needs for sensitivity, scalability, and portability. After highlighting the utilization of hydrogels and their role in these detection techniques, we outline limitations and advancements in the methods for the detection of foodborne pathogenic bacteria, especially the potential application of hydrogels in the food industry.

Biocomposite Polyvinyl Alcohol/Ferritin Hydrogels with Enhanced Stretchability and Conductivity for Flexible Strain Sensors

Protein-based hydrogels with stretchability and conductivity have potential applications in wearable electronic devices. However, the development of protein-based biocomposite hydrogels is still limited. In this work, we used natural ferritin to develop a PVA/ferritin biocomposite hydrogel by a repetitive freeze-thaw method. In this biocomposite hydrogel, ferritin, as a nano spring, forms a hydrogen bond with the PVA networks, which reduces the crystallinity of PVA and significantly improves the stretchability of the hydrogel. The fracture strain of the PVA/ferritin hydrogel is 203%, and the fracture stress is 112.2 kPa. The fracture toughness of the PVA/ferritin hydrogel is significantly enhanced to 147.03 kJ/m3, more than 3 times that of the PVA hydrogel (39.17 kJ/m3). In addition, the free residues and iron ions of ferritin endow the biocomposite hydrogel with enhanced ionic conductivity (0.15 S/m). The strain sensor constructed from this hydrogel shows good sensitivity (gauge factor = 1.7 at 150% strain), accurate real-time resistance response, and good long cyclic working stability when used for joint motion monitoring. The results indicate that a PVA/ferritin biocomposite hydrogel prepared by a facile method has enhanced stretchability and conductivity for flexible strain sensors. This work develops a new method for the preparation of protein-based hydrogels for wearable electronic devices.

Asymmetric natural wound dressing based on porous chitosan-alginate hydrogel/electrospun PCL-silk sericin loaded by 10-HDA for skin wound healing: In vitro and in vivo studies

An asymmetric wound dressing introduced, inspired by the skin structure made of chitosan and alginate hydrogel as the bottom layer and electrospun PCL-silk sericin (PCL-SS) as the top layer. In addition, an anti-inflammatory, bactericidal and immunomodulatory substance, 10-hydroxydecanoic acid (10-HDA), known as queen bee acid, was loaded in inner layer. The wound dressing was thoroughly characterized and confirmed to meet the criteria of a standard wound dressing through in vitro and in vivo studies. Although the mesoporous hydrogel layer shows 175 % swelling after being immersed in PBS (pH = 7.4) for 60 min and 80 % degradation after 14 days, the top layer shows 28 % swelling and 19 % degradation in the same time intervals. The hydrogel layer supports rapid wound healing, while the top layer offers protection against infection and physical threats. The dressing demonstrated antibacterial properties and enhanced cell proliferation at 1 % 10-HDA. Finally, the wound healing performance of the complete dressing was investigated in vivo using wistar rat. Clinical and histopathological assessments, along with the analysis of biophysical parameters of the skin healing, confirm that wound dressing with 10-HDA significantly accelerates wound healing compared to control groups, without any inflammatory side effects.

A novel HEMA copolymer hydrogel with antifouling and anti-inflammatory activity as a promising medical device coating layer to prevent microbial adhesion

Compared to antimicrobial agents, anti-adhesive surfaces can reduce bacteria adhesion and biofilm formation in catheters, providing better selectivity, efficiency, and device life span. In this research, novel anionic surface biomaterials were created and tested to reduce microbial adhesion and colonization in medical device coating. Maleic anhydride (MA) was polymerized with 2-HEMA in varying amounts to produce a p(HEMA-co-MA) hydrogel copolymer. Fourier transforms infrared characterization (ATR-FTIR), thermal analysis, scanning electron microscopy with energy-dispersive X-ray spectroscopy, swelling capacity, cytotoxicity evaluation, and mixed biofilm formation ability were used to characterize the copolymer hydrogels. Hydrogels were evaluated by considering the guidance and regulations of ISO and ASTM standards. The polymers were dense, had stable cross-linking between both monomers, were non-toxic to the Human Embryonic Kidney (HEK) 293 cell line, and reduced bacterial biofilm formation statistically significantly. Furthermore, increasing the amount of MA affected TGF-1 gene expression, where the gene expression was significantly elevated, especially at the highest percentage of MA. Furthermore, the high percentage of MA in the polymer improved the new polymer's thermal properties, film flexibility, and swelling capacity. These novel polymers could be promising materials for improving catheter biomaterial properties and modifying the surfaces of designated devices to reduce microbial infections and growth.

Model-Based Design of Variable Stiffness Soft Gripper Actuated by Smart Hydrogels

Soft grippers have shown their ability to grasp fragile and irregularly shaped objects, but they often require external mechanisms for actuation, limiting their use in large-scale situations. Their limited capacity to handle loads and deformations also restricts their customized grasping capabilities. To address these issues, a model-based soft gripper with adaptable stiffness was proposed. The proposed actuator comprises a silicone chamber with separate units containing hydrogel spheres. These spheres exhibit temperature-triggered swelling and shrinking behaviors. In addition, variable stiffness strips embedded in the units are introduced as the stiffness variation method. The validated finite element method model was used as the model-based design approach to describe the hydrogel behaviors and explore the affected factors on the bending performance. The results demonstrate that the actuator can be programmed to respond in a desired way, and the stiffness variation method enhances bending stiffness significantly. Specifically, a direct correlation exists between the bending angle and hydrogel sphere layers, with a maximum of 128° achieved. In addition, incorporating gap configurations into the chamber membrane results in a maximum threefold increase in the bending angle. Besides, the membrane type minimally impacts the bending angle from 21.3° to 24.6°. In addition, the embedded variable stiffness strips substantially increase stiffness, resulting in a 30-fold rise in bending stiffness. In conclusion, the novel soft gripper actuator enables substantial bending and stiffness control through active actuation, showcasing the potential for enhancing soft gripper performance in complex and multiscale grasping scenarios.

Design and synthesis of a new recyclable nanohydrogel based on chitosan for Deltamethrin removal from aqueous solutions: Optimization and modeling by RSM-ANN

In this study, a new magnetic biocompatible hydrogel was synthesized as an adsorbent for Deltamethrin pesticide removal. The optimal conditions and adsorption process of Deltamethrin by chitosan/polyacrylic acid/Fe3O4 nanocomposite hydrogel was studied by Response Surface Methodology by Central Composite Design (RSM-CCD) and Artificial Neural Network (ANN). This adsorbents were synthesized, and then characterized and investigated using FT-IR, XRD, FE-SEM, EDX, Map, VSM, and TGA methods. The results of these analyses showed that the nanocomposite hydrogel was well synthesized and has the ability to adsorb the Deltamethrin pesticide. The results obtained through analysis using response surface methodology showed that the maximum amount of adsorption was 99.79 % at 26 °C, while pH, initial concentration, contact time, and adsorbent dose were 7, 22 ppm, 90 min, and 1.3 g/L respectively. Comparison between results obtained from CCD modeling and artificial neural network proved that both methods had high ability to predict the adsorption process but the CCD method had higher coefficient of determination and lower error. The equilibrium and kinetic study of the process showed that the Toth isotherm model, pseudo-second-order is all suitable for expressing the adsorption process. In addition, the adsorption mechanism followed double-exponential model that combines external and internal diffusions. Results of Thermodynamic study suggested that the Deltamethrin adsorption on CS/PAA/Fe3O4 was a spontaneous and exothermic process. The results of the equilibrium process study revealed that the adsorption process was physical and desirable, therefore, the adsorption-desorption process was performed which showed that the composite was reusable up to 10 cycles.

Innovative hydrogel-based therapies for ischemia-reperfusion injury： bridging the gap between pathophysiology and treatment

Ischemia-reperfusion injury (IRI) commonly occurs in clinical settings, particularly in medical practices such as organ transplantation, cardiopulmonary resuscitation, and recovery from acute trauma, posing substantial challenges in clinical therapies. Current systemic therapies for IRI are limited by poor drug targeting, short efficacy, and significant side effects. Owing to their exceptional biocompatibility, biodegradability, excellent mechanical properties, targeting capabilities, controlled release potential, and properties mimicking the extracellular matrix (ECM), hydrogels not only serve as superior platforms for therapeutic substance delivery and retention, but also facilitate bioenvironment cultivation and cell recruitment, demonstrating significant potential in IRI treatment. This review explores the pathological processes of IRI and discusses the roles and therapeutic outcomes of various hydrogel systems. By categorizing hydrogel systems into depots delivering therapeutic agents, scaffolds encapsulating mesenchymal stem cells (MSCs), and ECM-mimicking hydrogels, this article emphasizes the selection of polymers and therapeutic substances, and details special crosslinking mechanisms and physicochemical properties, as well as summarizes the application of hydrogel systems for IRI treatment. Furthermore, it evaluates the limitations of current hydrogel treatments and suggests directions for future clinical applications.

Sodium Alginate-Starch Capsules for Enhanced Stability of Metformin in Simulated Gastrointestinal Fluids

The use of biopolymers in pharmaceuticals is well established, particularly for encapsulating biologically active compounds due to their beneficial properties. Alginate, widely recognized for its excellent encapsulation abilities, is the most commonly used biopolymer, while starch, typically known as insoluble dietary fiber, also serves as an effective agent for trapping and protecting compounds during processing, storage, and gastrointestinal transit. Sodium alginate-starch capsules with varying compositions were analyzed to develop metformin hydrochloride (MET) containing capsules with adequate physicochemical properties. In vitro testing with simulated gastrointestinal fluids showed that after 1 h, capsules with equal amounts of alginate and starch had a higher swelling ratio and better drug release behavior, despite lower MET entrapment efficiency compared to other formulations. Microstructural analysis revealed stability in simulated gastric fluids and solubility in simulated intestinal fluids, key factors in drug development. The results suggest that these biopolymeric compositions are highly resistant to gastric fluids and minimally soluble in the intestines, making them suitable for extended drug release. This research evaluates key technological parameters of a cost-effective encapsulation method for the controlled release of active substances, providing a versatile solution for pharmaceutical and biomedical applications.

Endogenous/exogenous stimuli‐responsive smart hydrogels for diabetic wound healing

Diabetes significantly impairs the body's wound‐healing capabilities, leading to chronic, infection‐prone wounds. These wounds are characterized by hyperglycemia, inflammation, hypoxia, variable pH levels, increased matrix metalloproteinase activity, oxidative stress, and bacterial colonization. These complex conditions complicate effective wound management, prompting the development of advanced diabetic wound care strategies that exploit specific wound characteristics such as acidic pH, high glucose levels, and oxidative stress to trigger controlled drug release, thereby enhancing the therapeutic effects of the dressings. Among the solutions, hydrogels emerge as promising due to their stimuli‐responsive nature, making them highly effective for managing these wounds. The latest advancements in mono/multi‐stimuli‐responsive smart hydrogels showcase their superiority and potential as healthcare materials, as highlighted by relevant case studies. However, traditional wound dressings fall short of meeting the nuanced needs of these wounds, such as adjustable adhesion, easy removal, real‐time wound status monitoring, and dynamic drug release adjustment according to the wound's specific conditions. Responsive hydrogels represent a significant leap forward as advanced dressings proficient in sensing and responding to the wound environment, offering a more targeted approach to diabetic wound treatment. This review highlights recent advancements in smart hydrogels for wound dressing, monitoring, and drug delivery, emphasizing their role in improving diabetic wound healing. It addresses ongoing challenges and future directions, aiming to guide their clinical adoption.

Bioprinting PDLSC-Laden Collagen Scaffolds for Periodontal Ligament Regeneration

Periodontitis and severe trauma are major causes of damage to the periodontal ligament (PDL). Repairing the native conditions of the PDL is essential for the stability of the tissue and its interfaces. Bioprinting periodontal ligament stem cells (PDLSCs) is an interesting approach to guide the regeneration of PDL and interfacial integration. Herein, a collagen-based bioink mimicking the native extracellular matrix conditions and carrying PDLSCs was tested to guide the periodontal ligament organization. The bioink was tested at two different concentrations (10 and 15 mg/mL) and characterized by swelling and degradation, microstructural organization, and rheological properties. The biological properties were assessed after loading PDLSCs into bioinks for bioprinting. The characterization was performed through cell viability, alizarin red assay, and expression for ALP, COL1A1, RUNX2, and OCN. The in vivo biocompatibility of the PDLSC-laden bioinks was verified using subcutaneous implantation in mice. Later, the ability of the bioprinted PDLSC-laden bioinks on dental root fragments to form PDL was also investigated in vivo in mice for 4 and 10 weeks. The bioinks demonstrated typical shear-thinning behavior, a porous microstructure, and stable swelling and degradation characteristics. Both concentrations were printable and provided suitable conditions for a high cell survival, proliferation, and differentiation. PDLSC-laden bioinks demonstrated biocompatibility in vivo, and the bioprinted scaffolds on the root surface evidenced PDLSC alignment, organization, and PDLSC migration to the root surface. The versatility of collagen-based bioinks provides native ECM conditions for PDLSC proliferation, alignment, organization, and differentiation, with translational applications in bioprinting scaffolds for PDL regeneration.

Rosemary-Mediated Green Synthesis of ZnO Nanoparticles and their Integration into Hydrogel Matrices: Evaluating Effects on Wheat Growth and Antibacterial Properties

In this study, the impact of zinc oxide nanoparticles (ZnO-NPs) generated using rosemary extract, synthesized using environmentally friendly processes and integrated into a cross-linked polymer matrix, on growth performance of wheat is evaluated. Rosemary extract used as coating, stabilizing, and reducing agents in this green synthesis method. Fourier transform infrared spectroscopy analyses demonstrated the presence of phytochemical constituents of the plant extract that served as capping agents during the synthesis process. The nanoparticles are sprayed to the plant leaves. The effects of nanoparticles within the hydrogel on plant development are compared with the effects of nanoparticles in suspension. The percentage of seed germination is unaffected by either rosemary- or raw-ZnO-NPs; however, the root and shoot elongation are considerably impacted by the nanoparticle treatments. The threshold concentrations are determined as 3000 mg L-1 for rosemary-ZnO-NPs and 2000 mg L-1 for raw-ZnO-NPs. Additionally, antibacterial test results showed that the activity level on Escherichia coli is higher for rosemary-ZnO-NPs compared to raw-ZnO-NPs. The results of this research may provide guidance on how green synthesis methods and the use of nanoparticle-hydrogel composites in plant breeding can be used in future agricultural applications. This can be considered an important step in terms of agricultural innovations and sustainability.

Starch-based bio-membrane for water purification, biomedical waste, and environmental remediation

This review article explores the utilization of starch-based materials as smart materials for the removal of dyes and heavy metals from wastewater, highlighting their cost-effectiveness, biodegradability, and biocompatibility. It addresses the critical need for clean water, emphasizing the contamination caused by industrial activities, such as printing, textile, cosmetic, and leather tanning industries. Starch and its derivatives demonstrate significant potential in water purification technology, effectively removing toxicants through hydrogen bonding, electrostatic interactions, and complexation. The review also discusses the application of starch-based materials in the biomedical field, particularly as drug carriers. Starch-based microspheres, hydrogels, nano-spheres, and nano-composites exhibit sustained drug-release properties and are effective in transporting various drugs, including DOX, quercetin, 5-Fluorouracil, glycyrrhizic acid, paclitaxel, tetracycline hydrochloride, amoxicillin, ciprofloxacin, and moxifloxacin. These materials show good antimicrobial activity against a range of pathogens, including C. albicans, E. coli, S. aureus, C. neoformance, B. subtilis, A. niger, A. fumigatus, and A. terreus. While highlighting the significant achievements of starch-based materials, the review also discusses current limitations and areas for future development. Key weaknesses include the need for enhanced adsorption capacities and the challenge of scaling up production for industrial applications. The review concludes by identifying development directions, such as improving functionalization techniques and exploring new applications in water purification and drug delivery systems. This article aims to assist researchers in advancing the field of starch-based materials for environmental and biomedical applications.

Decellularized Macroalgae as Complex Hydrophilic Structures for Skin Tissue Engineering and Drug Delivery

Due to their indisputable biocompatibility and abundant source, biopolymers are widely used to prepare hydrogels for skin tissue engineering. Among them, cellulose is a great option for this challenging application due to its increased water retention capacity, mechanical strength, versatility and unlimited availability. Since algae are an unexploited source of cellulose, the novelty of this study is the decellularization of two different species, freshly collected from the Black Sea coast, using two different chemical surfactants (sodium dodecyl sulphate and Triton X-100), and characterisation of the resulted complex biopolymeric 3D matrices. The algae nature and decellularization agent significantly influenced the matrices porosity, while the values obtained for the hydration degree included them in hydrogel class. Moreover, their capacity to retain and then controllably release an anti-inflammatory drug, ibuprofen, led us to recommend the obtained structures as drug delivery systems. The decellularized macroalgae hydrogels are bioadhesive and cytocompatible in direct contact with human keratinocytes and represent a great support for cells. Finally, it was noticed that human keratinocytes (HaCaT cell line) adhered and populated the structures during a monitoring period of 14 days.

'Click' hydrogels from renewable polysaccharide resources: Bioorthogonal chemistry for the preparation of alginate, cellulose and other plant-based networks with biomedical applications

Click chemistry refers to a class of highly selective reactions that occur in one pot, are not disturbed by water or oxygen, proceed quickly to high yield and generate only inoffensive byproducts. Since its first definition by Barry Sharpless in 2001, click chemistry has increasingly been used for the preparation of hydrogels, which are water-swollen polymer networks with numerous biomedical applications. Polysaccharides, which can be obtained from renewable resources including plants, have drawn growing attention for use in hydrogels due to the recent focus on the development of a sustainable society and the reduction of the environmental impact of the chemical industry. Importantly, plant-based polysaccharides are often bioresorbable and exhibit excellent biocompatibility and biomimicry. This comprehensive review describes the synthesis, characterization and biomedical applications of hydrogels which combine the renewable and biocompatible aspects of polysaccharides with the chemically and biomedically favorable characteristics of click crosslinking. The manuscript focuses on click hydrogels prepared from alginate and cellulose, the most widely used polysaccharides for this type of hydrogel, but also click hydrogels based on other plant-derived polymers (e.g. pectin) are discussed. In addition, the challenges are described that should be overcome to facilitate translation from academia to the clinic.

Biocompatibility and expression of transcription factors of a type B gelatin-Extracellular Matrix of Porcin Urinary Blader scaffold

OBJECTIVE

to evaluate a membrane based on type B gelatin (G) and porcine urinary bladder extracellular matrix (PUB-EM), highlighting the potential effect of the combination evaluated by biocompatibility and regulation of the expression of transcription factors involved in tissue regeneration. G-PUB-EM membranes were prepared at 12.5, 25, and 50% w/v, and evaluated for biocompatibility with Fibroblast. Chemical characterization by FTIR-ATR showed complex spectra during crosslinking process with glutaraldehyde. Physical tests were performed in deionized water and PBS for 48 h. A significant increase in swelling was observed during the first 2 h. Biocompatibility testing (MTS) and evaluation of the expression profile of genes involved in the cell cycle (Cyclin-D1 VEGF, TNF and NF-κ-B) by PCR showed an increase in viability in a PUB-EM content-dependent way, except for 50% PUB-EM membrane which showed cytotoxic effects with a decrease in cell viability below 70%. The membranes showed an increase in the expression of some factors of cell cycle, as well as inflammatory processes that could promote tissue repair. 12.5 and 25% gelatin type B/porcine urinary bladder extracellular matrix (G/PUB-EM) based membranes have potential for tissue regeneration applications.

IMPACT STATEMENT

The use of membranes based on type B gelatin and porcine urinary bladder for tissue engineering represents a novel strategy. Biocompatibility and signaling pathways play a primary role in tissue repair and wound recovery. Transcription factors that mediate signaling, cell division and vascularization are part of molecules that intervene in the regenerative potential of cells. These techniques will have a significant impact on tissue repair and regeneration and thus stop depending on tissue donors or other surgical sites from the same patient, as is the case with burn patients.

From lab to wearables: Innovations in multifunctional hydrogel chemistry for next-generation bioelectronic devices

Functional hydrogels have emerged as foundational materials in diagnostics, therapy, and wearable devices, owing to their high stretchability, flexibility, sensing, and outstanding biocompatibility. Their significance stems from their resemblance to biological tissue and their exceptional versatility in electrical, mechanical, and biofunctional engineering, positioning themselves as a bridge between living organisms and electronic systems, paving the way for the development of highly compatible, efficient, and stable interfaces. These multifaceted capability revolutionizes the essence of hydrogel-based wearable devices, distinguishing them from conventional biomedical devices in real-world practical applications. In this comprehensive review, we first discuss the fundamental chemistry of hydrogels, elucidating their distinct properties and functionalities. Subsequently, we examine the applications of these bioelectronics within the human body, unveiling their transformative potential in diagnostics, therapy, and human-machine interfaces (HMI) in real wearable bioelectronics. This exploration serves as a scientific compass for researchers navigating the interdisciplinary landscape of chemistry, materials science, and bioelectronics.

Hydroentangled waste cotton non-woven based alginate hydrogel wound dressing for high wound exudates

Hydrogels are used in modern wound dressings due to their ability to provide comfort with quick healing. However, poor mechanical properties of hydrogels limit their availability in commercial wound dressings. Nonwovens are highly porous, strong, and flexible structures that can provide support to hydrogels without compromising their properties. In this study, a cost-effective and sustainable hydroentangled nonwoven from industrial cotton waste was prepared and incorporated into alginate hydrogel for wound dressings. The novel composite of hydroentangled cotton nonwoven and alginate hydrogel was synthesized by a simple sol-gel technique. The effect of concentration of alginate hydrogel (0.5 wt%, 1 wt%, 1.5 wt %) and drying temperature (20 °C, 40 °C, 60 °C) of composite was analyzed for high wound exudates. The properties of prepared composite samples were characterized by scanning electron microscopy (SEM), XRD, tensile strength, tear strength, Air permeability, moisture management wound exudate test, and quantitative antimicrobial testing. Moreover, the comfort performance of these samples was evaluated by air permeability and moisture management testing. The properties of developed composites are highly dependent on the concentration of alginate and drying temperature. The results showed that maximum fluid absorbency (%) of 650 was achieved with good comfort properties. This study can help to increase the commercial availability of hydrogel-based wound dressings.

Sustained release of 3D printed bupropion hydrochloride tablets bearing Braille imprints for the visually impaired

3D printing has been introduced as a novel approach for the design of personalized dosage forms and support patient groups with special needs that require additional assistance for enhanced medication adherence. In this study liquid crystal display (LCD) is introduced for the development of sustained release bupropion.HCl printed tablets. The optimization of printing hydrogel inks was combined with the display of Braille patterns on the tablet surface for blind or visually impaired patients. Due to the high printing accuracy, the Braille patterns could be verified by blind patients and provide the required information. Further characterization revealed the presence of BUP in amorphous state within the photopolymerized resins. The selection of poly(ethylene glycol) (PEG)-diacrylate (PEGDA) of different molecular weights and the presence of surfactants or solubilizers disrupted the resin photopolymerization, thus controlling the BUP dissolution rates. A small batch scale-up study demonstrated the capacity of LCD to print rapidly a notable number of tablets within 24 min.

Isothiocyanate-Based Microemulsions Loaded into Biocompatible Hydrogels as Innovative Biofumigants for Agricultural Soils

Biofumigation was proposed as an alternative to synthetic pesticides for the disinfection of agricultural soils, in view of the biocidal effect of isothiocyanates (ITCs) released by some vegetal species, like Brassicaceae. However, biofumigation also presents limitations; thus, a novel and viable alternative could be the direct introduction of ITCs into agricultural soils as components loaded into biodegradable hydrogels. Thus, in this work, ITCs-based microemulsions were developed, which can be loaded into porous polymer-based hydrogel beads based on sodium alginate (ALG) or sodium carboxymethyl cellulose (CMC). Three ITCs (ethyl, phenyl, and allyl isothiocyanate) and three different surfactants (sodium dodecylsulfate, Brij 35, and Tween 80) were considered. The optimal system was characterized with attenuated ATR-FTIR spectroscopy and differential scanning calorimetry to study how the microemulsion/gels interaction affects the gel properties, such as the equilibrium water content or free water index. Finally, loading and release profiles were studied by means of UV-Vis spectrophotometry. It was found that CMC hydrogel beads showed a slightly more efficient profile of micelles' release in water with respect to ALG beads. For this reason, and due to the enhanced contribution of Fe(III) to their biocidal properties, CMC-based hydrogels are the most promising in view of the application on real agricultural soils.

Release of natural extracts from PVA and PVA-CMC hydrogel wound dressings: a power law swelling/delivery

Introduction

PVA hydrogels present many characteristics of the ideal dressing, although without antimicrobial properties. The present work aims to study the physical, mechanical and release characteristics of hydrogel wound dressings loaded with either of two natural herbal products, sage extract and dragon's blood.

Methods

Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and tensile mechanical testing were used to investigate the structure and properties of the gels. Swelling and degradation tests were conducted according to ISO 10993-9. Release characteristics were studied using UV Spectrophotometry.

Results

PVA matrices incorporating sage extract or dragon's blood (DB) present hydrogen bonding between these components. PVA-CMC hydrogels containing sage present similar spectra to PVA-CMC alone, probably indicating low miscibility or interaction between the matrix and sage. The opposite is found for DB, which exhibits more pronounced interference with crystallinity than sage. DB and NaCMC negatively affect Young's modulus and failure strength. All samples appear to reach equilibrium swelling degree (ESD) in 24 h. The addition of DB and sage to PVA increases the gels' swelling capacity, indicating that the substances likely separate PVA chains. The inclusion of CMC contributes to high media uptake. The kinetics profile of media uptake for 4 days is described by a power-law model, which is correlated to the drug delivery mechanism.

Discussion

A PVA-CMC gel incorporating 15% DB, the highest amount tested, shows the most favorable characteristics for flavonoid delivery, as well as flexibility and swelling capacity.

OphthalMimic: A new alternative apparatus without animal tissue for the evaluation of topical ophthalmic drug products

The necessity of animal-free performance tests for novel ophthalmic formulation screening is challenging. For this, we developed and validated a new device to simulate the dynamics and physical-chemical barriers of the eye for in vitro performance tests of topic ophthalmic formulations. The OphthalMimic is a 3D-printed device with an artificial lacrimal flow, a cul-de-sac area, a support base, and a simulated cornea comprised of a polymeric membrane containing poly-vinyl alcohol 10 % (w/v), gelatin 2.5 % (w/v), and different proportions of mucin and poloxamer, i.e., 1:1 (M1), 1:2 (M2), and 2:1 (M3) w/v, respectively. The support base is designed to move between 0° and 50° to replicate the movement of an eyelid. We challenged the model by testing the residence performance of poloxamer®407 16 % and poloxamer®407 16 % + chitosan 1 % (PLX16CS10) gels containing fluconazole. The test was conducted with a simulated tear flow of 1.0 mL.min-1 for 5 min. The OphthalMimic successfully distinguished PLX16 and PLX16C10 formulations based on their fluconazole drainage (M1: 65 ± 14 % and 27 ± 10 %; M2: 58 ± 6 % and 38 ± 9 %; M3: 56 ± 5 % and 38 ± 18 %). In conclusion, the OphthalMimic is a promising tool for comparing the animal-free performance of ophthalmic formulations.

Triple-Hybrid BioScaffold Based on Silk Fibroin, Chitosan, and nano-Biphasic Calcium Phosphates: Preparation, Characterization of Physiochemical and Biopharmaceutical Properties

Bioscaffolds, which promote cell regeneration and restore tissues' functions, have emerged as significant need in clinic. The hybrid of several biomaterials in a bioscaffold renders clinically advanced and relevant properties for applications yet add challenges in cost efficiency, production, and clinical investigation. This study proposes a facile and sustainable method to formulate a triple-hybrid bioscaffold based on Vietnamese cocoon origin Silk Fibroin, Chitosan, and nano-Biphasic Calcium Phosphates (nano-BCP) that can be easily molded, has high porosity (55-80%), and swelling capacity that facilitates cell proliferation and nutrient diffusion. Notably, their mechanical properties, in particular compressive strength, can easily be tuned in a range from 50 - 200 kPa by changing the amount of nano-BCP addition, which is comparable to the successful precedents for productive cell regeneration. The latter parts investigate the biopharmaceutical properties of a representative bioscaffold, including drug loading and release studies with two kinds of active compounds, salmon calcitonin and methylprednisolone. Furthermore, the bioscaffold is highly biocompatible as the results of hemocompatibility and hemostasis tests, as well as ovo chick chorioallantoic membrane investigation. The findings of the study suggest the triple-hybrid scaffold as a promising platform for multi-functional drug delivery and bone defect repair.

Functional Bio-Based Polymeric Hydrogels for Wastewater Treatment: From Remediation to Sensing Applications

In recent years, many researchers have focused on designing hydrogels with specific functional groups that exhibit high affinity for various contaminants, such as heavy metals, organic pollutants, pathogens, or nutrients, or environmental parameters. Novel approaches, including cross-linking strategies and the use of nanomaterials, have been employed to enhance the structural integrity and performance of the desired hydrogels. The evolution of these hydrogels is further highlighted, with an emphasis on fine-tuning features, including water absorption capacity, environmental pollutant/factor sensing and selectivity, and recyclability. Furthermore, this review investigates the emerging topic of stimuli-responsive smart hydrogels, underscoring their potential in both sorption and detection of water pollutants. By critically assessing a wide range of studies, this review not only synthesizes existing knowledge, but also identifies advantages and limitations, and describes future research directions in the field of chemically engineered hydrogels for water purification and monitoring with a low environmental impact as an important resource for chemists and multidisciplinary researchers, leading to improvements in sustainable water management technology.

A hybrid structure based on silk fibroin/PVA nanofibers and alginate/gum tragacanth hydrogel embedded with cardamom extract

Hybrid structures made of natural-synthetic polymers have been interested due to high biological features combining promising physical-mechanical properties. In this research, a hybrid dressing consisting of a silk fibroin (SF)/polyvinyl alcohol (PVA) nanofibers and sodium alginate (SA)/gum tragacanth (GT) hydrogel incorporating cardamom extract as an antibacterial agent was prepared. Accordingly, SF was extracted from cocoons followed by electrospinning in blend form with PVA (SF/PVA ratio: 1:1) under the voltage of 18 kV and the distances of 15 cm. The SEM images confirmed the formation of uniform, bead free fibers with the average diameter of 199 ± 28 nm. FTIR and XRD results revealed the successful extraction of SF and preparation of mixed fibrous mats. Next, cardamom oil extract-loaded SA/GT hydrogel was prepared and the nanofibrous structure was placed on the surface of hydrogel. SEM analysis depicted the uniform morphology of hybrid structure with desirable matching between two layers. TGA analysis showed desired thermal stability. The swelling ratio was found to be 1251% after 24 h for the hybrid structure and the drug was released without any initial burst. MTT assay and cell attachment results showed favorable biocompatibility and cell proliferation on samples containing extract, and antibacterial activity values of 85.35% against S. aureus and 75% against E. coli were obtained as well. The results showed that the engineered hybrid nanofibrous-hydrogel film structure incorporating cardamom oil extract could be a promising candidate for wound healing applications and skin tissue engineering.

l-Carnosine loaded on carboxymethyl cellulose hydrogels for promoting wound healing

Wound management remains a challenge in clinical practice. Nowadays, patients have an increasing demand for wound repair with enhanced speed and quality; therefore, there is a great need to seek therapeutic strategies that can promote rapid and effective wound healing. In this study, we developed a carboxymethyl cellulose hydrogel loaded with l-carnosine (CRN@hydrogel) for potential application as a wound dressing. In vitro experiments confirmed that CRN@hydrogel can release over 80% of the drug within 48 h and demonstrated its favorable cytocompatibility and blood compatibility, thus establishing its applicability for safe utilization in clinical practice. Using a rat model, we found that this hydrogel could promote and accelerate wound healing more effectively. These results indicate that the novel hydrogel can serve as an efficient therapeutic strategy for wound treatment.

Design and synthesis of drug hydrogels containing carboxymethylcellulose with honeycomb structure and pH-sensitivity as drug delivery systems for adriamycin, metformin, and naproxen

The aim of this research is to prepare and identify functionalized carboxymethylcellulose/mesoporous silica nanohydrogels (CMC/NH2-MCM-41) for obtaining a pH-sensitive system for the controlled release of drugs. The beads of CMC/NH2-MCM-41 nanocomposites were prepared by dispersing NH2-MCM-41 in a CMC polymer matrix and crosslinking with ferric ions (Fe3+). The SEM analysis of samples revealed enhancement in surface porosity of the functionalized nanohydrogel beads compared to the conventional beads. Swelling of the prepared functionalized nanohydrogels was evaluated at various pH values including pH = 7.35-7.45 (simulated body fluid or healthy cells), pH = 6 (simulated intestinal fluid), and pH = 1.5-3.5 (simulated gastric fluid). The swelling of CMC/MCM-41 and CMC/NH2-MCM-41 nanohydrogels at the pH values of simulated body fluid and simulated intestinal fluid is much higher than that of simulated gastric fluid, indicating successful synthesis of pH-sensitive nanohydrogels for drug delivery. The drug loading results showed that drug release in the CMC/NH2-MCM-41 system is much slower than that in the CMC/MCM-41 system. The results of the survival studies for the manufactured systems showed a very good biocompatibility of the designed drug delivery systems for biological applications. By coating the surface of functionalized mesopores with CMC hydrogel, we were able to develop a pH-sensitive intelligent drug delivery system.

Terahertz Spectroscopic Insight into the Hydrogelation of Copper Ion-Coordinated Poly(vinyl alcohol)

Metal-coordinated hydrogels are becoming increasingly popular in the biomedical field due to their unique properties. However, the mechanism behind gel forming involving metal ions is not yet fully understood. In this work, terahertz spectroscopy was used to investigate the role of interfacial water in the gelation process of copper ion-coordinated poly(vinyl alcohol) hydrogels. The results showed that the binding of copper ions could alter the interfacial hydration dynamics of the poly(vinyl alcohol) polymers. Combined with the results of differential scanning calorimetry (DSC), we propose a possible hydration layer-mediated mechanism for the formation of cooper ion-coordinated hydrogel during the freeze-thaw cycle. These results highlight the value of terahertz spectroscopy as a sensor for studying the hydration process in hydrogels and provide an important clue for understanding the mechanism of hydrogelation in ion-coordinated hydrogels.

Cellulose-Based Hydrogels for Wastewater Treatment: A Focus on Metal Ions Removal

The rapid worldwide industrial growth in recent years has made water contamination by heavy metals a problem that requires an immediate solution. Several strategies have been proposed for the decontamination of wastewater in terms of heavy metal ions. Among these, methods utilizing adsorbent materials are preferred due to their cost-effectiveness, simplicity, effectiveness, and scalability for treating large volumes of contaminated water. In this context, heavy metal removal by hydrogels based on naturally occurring polymers is an attractive approach for industrial wastewater remediation as they offer significant advantages, such as an optimal safety profile, good biodegradability, and simple and low-cost procedures for their preparation. Hydrogels have the ability to absorb significant volumes of water, allowing for the effective removal of the dissolved pollutants. Furthermore, they can undergo surface chemical modifications which can further improve their ability to retain different environmental pollutants. This review aims to summarize recent advances in the application of hydrogels in the treatment of heavy metal-contaminated wastewater, particularly focusing on hydrogels based on cellulose and cellulose derivatives. The reported studies highlight how the adsorption properties of these materials can be widely modified, with a wide range of adsorption capacity for different heavy metal ions varying between 2.3 and 2240 mg/g. The possibility of developing new hydrogels with improved sorption performances is also discussed in the review, with the aim of improving their effective application in real scenarios, indicating future directions in the field.

Boosting Water Retention in Agriculture: Vine Biochar-Doped Hydrogels' Swelling and Germination Effects

Water scarcity presents a formidable challenge to agriculture, particularly in arid, semiarid, and rainfed settings. In agricultural contexts, hydrogels serve as granular agents for water retention, undergoing considerable expansion upon water exposure. They assume versatile roles encompassing soil-water retention, the dispensation of nutrients and pesticides, seed encapsulation, erosion mitigation, and even food supplementation. This study's objective involves the examination of biochar-infused hydrogels, fashioned by incorporating vine pruning waste-derived biochars, and the assessment of swelling behaviors in various aqueous environments encompassing deionized, tap, and saline water at concentrations of 0.5-1%. Characterizations of the vine-biochars-VB and biochar-incorporated hydrogels-VBHG are executed, with particular attention to their swelling properties across diverse media. As an initial step toward appraising their agricultural relevance, these hydrogels are introduced to a germination medium featuring wheat seeds to discern potential influences on germination dynamics. The maximum swelling capacity of VBHG is recorded in deionized water, tap water at pH 7.0, tap water at pH 9.0, saline water at 0.5%, and saline water at 1%, reaching 352%, 207%, 230%, 522%, and 549%, respectively. Remarkably, the 0.5% VBHG treatment exhibits the most pronounced root elongation. The application of hydrogels in agriculture exhibits promise, particularly within drought-related contexts and potential soilless applications.

Assessment of energy cane bagasse-derived cellulosic microfiber hydrogels on the growth of potted chili peppers

Energy cane (Saccharum spp.) bagasse, a type of biomass waste, is often underutilized, burned, or left to dispose of itself. This research aimed to evaluate the potential of converting this bagasse into high-value cellulosic microfiber hydrogels (CMH) for water conservation and potted chili (Capsicum annuum) plant growth. CMH offers a biodegradable alternative to synthetic polyacrylamide (PA) hydrogels and provides the dual benefit of improved water use efficiency and reduced environmental impact due to their ability to naturally break down in the soil. In this study, CMH and PA hydrogels were compared for water retention value (WRV), and reswelling kinetics (RK), as well as their effects on plant height, leaf count, root-to-shoot ratios (R:S ratio), and soil moisture retention. Two versions of CMH, CMH65 and CMH60, were prepared with varying cellulose-chitosan ratios: 65:35 and 60:40, respectively. The hydrogels were tested at four concentrations (0, 0.5, 1.0, and 2.0% w/w) by being mixed in Promix® soil. Observations were recorded over a 16-day period without additional water. Also, the WRV of hydrogels at 240 min and RK (10-180 min) were compared over three swelling-deswelling cycles. The PA hydrogel exhibited higher WRV (exceeding 450%) compared to CMH (45%). However, PA led to reduced plant height, leaf count, and R:S ratio when compared to higher concentrations of CMH65 and CMH60. In general, CMH60 (0.5% and 2%) exhibited superior plant growth. All hydrogels exhibited a significant decrease (p < 0.05) in WRV across successive cycles. Notably, during cycle 2, both CMH65 and CMH60 peaked in WRV at 10 and 20 min, respectively, compared to cycle 1. This study demonstrates the potential of bagasse-derived hydrogels as a value-added product for water conservation and crop growth.

Biotechnological applications of amyloid fibrils

Protein aggregates and amyloid fibrils have special qualities and are used in a variety of biotechnological applications. They are extensively employed in bioremediation, biomaterials, and biocatalysis. Because of their capacity to encapsulate and release pharmaceuticals and their sensitivity to certain molecules, respectively, they are also used in drug delivery and biosensor applications. They have also demonstrated potential in the domains of food and bioremediation. Additionally, amyloid peptides have drawn interest in biological applications, especially in the investigation of illnesses like Parkinson's and Alzheimer's. The unique characteristics of amyloid fibrils, namely their mechanical strength and β-sheet structure, make them adaptable to a wide range of biotechnological uses. Even with their promise, one important factor to keep in mind before widely using modified amyloid materials is their potential toxicity. Thus, current research aims to overcome safety concerns while maximizing their potential.

Synthesis and Characterisation of Hemihydrate Gypsum-Polyacrylamide Composite: A Novel Inorganic/Organic Cementitious Material

This study combined inorganic α-hemihydrate gypsum (α-HHG) with organic polyacrylamide (PAM) hydrogel to create a novel α-HHG/PAM composite material. Through this facile composite strategy, this fabricated material exhibited a significantly longer initial setting time and higher mechanical strength compared to α-HHG. The effects of the addition amount and the concentration of PAM precursor solution on the flowability of the α-HHG/PAM composite material slurry, initial setting time, and mechanical properties of the hardened specimens were investigated. The structural characteristics of the composite material were examined using XRD, FE-SEM, and TGA. The results showed that the initial setting time of the α-HHG/PAM composite material was 25.7 min, which is an extension of 127.43% compared to that of α-HHG. The flexural strength and compressive strength of the oven-dried specimens were 23.4 MPa and 58.6 MPa, respectively, representing increases of 34.73% and 84.86% over values for α-HHG. The XRD, FE-SEM, and TGA results all indicated that the hydration of α-HHG in the composite material was incomplete. The incompleteness is caused by the competition between the hydration process of inorganic α-HHG and the gelation process of the acrylamide molecules for water, which hinders some α-HHG from entirely reacting with water. The enhanced mechanical strength of the α-HHG/PAM composite material results from the tight interweaving and integrating of organic and inorganic networks. This study provides a concise and efficient approach to the modification research of hemihydrate gypsum.

Optimization of Ink Composition and 3D Printing Process to Develop Soy Protein-Based Scaffolds

Inks based on soybean protein isolate (SPI) were developed and their formulations were optimized as a function of the ink heat treatment and the content of other biopolymers to assess the effects of protein-polysaccharides and protein-protein interactions. First, the rheological behavior of the inks was analyzed in relation to the polyvinyl alcohol (PVA) concentration employed (20, 25, and 30 wt%) and, as a result of the analysis, the ink with 25 wt% PVA was selected. Additionally, sodium alginate (SA) and gelatin (GEL) were added to the formulations to improve the viscoelastic properties of the inks and the effect of the SA or GEL concentrations (1, 2, and 3 wt%) was studied. All inks showed shear thinning behavior and self-supporting abilities. Among all the 3D printed scaffolds, those with higher SA (3 wt%) or GEL (2 and 3 wt%) content showed higher shape fidelity and were selected for further characterization. Texture profile analysis demonstrated that the scaffolds prepared with previously heat-treated inks containing 3 wt% GEL showed the highest strength. Additionally, these scaffolds showed a higher water-uptake capacity profile.

Influence of Chemical Nature of Citric and Tartaric Acids on Reaction Time of the Crosslinking of Polyvinyl Alcohol Hydrogels

Poly(vinyl alcohol) (PVOH) is a water-soluble polymer having a hydroxyl group as a functional group contributing to excellent membrane-forming and mechanical performance. PVOH is obtained by the hydrolysis of polyvinyl acetate, and its physical properties are affected by its degree of hydrolysis, whether, partial or complete. In this study, PVOH hydrogels were synthesized by a solution under stirring and heating techniques with citric (AC) and tartaric acids (AT) crosslinker agents, with different time reactions of 20 min.; 1; 2, and 3 h were investigated. These samples were characterized by the kinetics of water uptake, gel fraction, thermal analysis, and physical-chemical analysis, and their structure was elucidated. The results obtained have shown chemical modification by organic acids and improved the properties to good thermal stability and swelling to AT hydrogels up to 900% water uptake. In the gel fraction, the samples' esterification was shown and verified by FTIR spectra. To AC hydrogels the chemical modification was low due to the steric hindrance, which caused disintegration of the hydrogel in swelling and gel fraction test, but with absorption in the moisture test performed. The incorporation and effects of citric and tartaric acids enable the development of new hydrogel systems, with specific properties.

NIR-responsive carboxymethyl-cellulose hydrogels containing thioketal-linkages for on-demand drug delivery system

Near-infrared (NIR) light-responsive hydrogels have emerged as a highly promising strategy for effective anticancer therapy owing to the remotely controlled release of chemotherapeutic molecules with minimal invasive manner. In this study, novel NIR-responsive hydrogels were developed from reactive oxygen species (ROS)-cleavable thioketal cross-linkers which possessed terminal tetrazine groups to undergo a bio-orthogonal inverse electron demand Diels Alder click reaction with norbornene modified carboxymethyl cellulose. The hydrogels were rapidly formed under physiological conditions and generated N2 gas as a by-product, which led to the formation of porous structures within the hydrogel networks. A NIR dye, indocyanine green (ICG) and chemotherapeutic doxorubicin (DOX) were co-encapsulated in the porous network of the hydrogels. Upon NIR-irradiation, the hydrogels showed spatiotemporal release of encapsulated DOX (>96 %) owing to the cleavage of thioketal bonds by interacting with ROS generated from ICG, whereas minimal release of encapsulated DOX (<25 %) was observed in the absence of NIR-light. The in vitro cytotoxicity results revealed that the hydrogels were highly cytocompatible and did not induce any toxic effect on the HEK-293 cells. In contrast, the DOX + ICG-encapsulated hydrogels enhanced the chemotherapeutic effect and effectively inhibited the proliferation of Hela cancer cells when irradiated with NIR-light.

Regeneration and Long-Term Stability of a Low-Power Eco-Friendly Temperature Sensor Based on a Hydrogel Nanocomposite

A water-processable and low-cost nanocomposite material, based on gelatin and graphene, has been used to fabricate an environmentally friendly temperature sensor. Demonstrating a temperature-dependent open-circuit voltage between 260 and 310 K, the sensor effectively detects subzero ice formation. Notably, it maintains a constant temperature sensitivity of approximately -19 mV/K over two years, showcasing long-term stability. Experimental evidence demonstrates the efficient regeneration of aged sensors by injecting a few drops of water at a temperature higher than the gelation point of the hydrogel nanocomposite. The real-time monitoring of the electrical characteristics during the hydration reveals the initiation of the regeneration process at the gelation point (~306 K), resulting in a more conductive nanocomposite. These findings, together with a fast response and low power consumption in the range of microwatts, underscore the potential of the eco-friendly sensor for diverse practical applications in temperature monitoring and environmental sensing. Furthermore, the successful regeneration process significantly enhances its sustainability and reusability, making a valuable contribution to environmentally conscious technologies.