Noble metal nanoparticles for biosensing applications

Nanoparticle-assisted PCR: fundamentals, mechanisms, and forensic implications

Polymerase Chain Reaction (PCR) has transformed forensic DNA analysis but is still limited when dealing with compromised trace or inhibitor-containing samples. Nanotechnology has been integrated into nanoPCR (nanoparticle-assisted PCR) to overcome these obstacles. Nanomaterials improve PCR sensitivity, selectivity, and efficiency. Examples of these materials are semiconductor quantum dots and metal nanoparticles. They enhance DNA binding to primers, stabilize enzymes, and function as effective heat conductors, making accurate amplification possible even with tainted samples. The developments in nanoPCR have potential uses in forensics, as they allow for the more sensitive analysis of smaller, polluted, or deteriorated samples. Nevertheless, there are methodological and ethical issues. To provide credible and legitimate forensic evidence, rigorous validation and standardization of NanoPCR techniques are vital. The article addresses the relevant ethical and methodological aspects in forensic casework while examining the integration of nanotechnology into PCR.

Biosensors, Artificial Intelligence Biosensors, False Results and Novel Future Perspectives

Medical biosensors have set the basis of medical diagnostics, and Artificial Intelligence (AI) has boosted diagnostics to a great extent. However, false results are evident in every method, so it is crucial to identify the reasons behind a possible false result in order to control its occurrence. This is the first critical state-of-the-art review article to discuss all the commonly used biosensor types and the reasons that can give rise to potential false results. Furthermore, AI is discussed in parallel with biosensors and their misdiagnoses, and again some reasons for possible false results are discussed. Finally, an expert opinion with further future perspectives is presented based on general expert insights, in order for some false diagnostic results of biosensors and AI biosensors to be surpassed.

Gold Nanoparticles as a Tool to Detect Biomarkers in Osteoarthritis: New Insights

Extensive research over the years has revealed the remarkable potential of gold nanoparticles (AuNPs) for detecting biomarkers in osteoarthritis (OA). AuNPs are a promising class of nanomaterials offering a wide range of diagnostic and clinical applications. It provides an effective and robust framework for qualitative and quantitative analysis of biomarkers present in the biological fluids of OA patients. AuNPs as theranostics have gained significant attention due to their discrete physical and optical characteristics, including localized surface plasmon resonance (LSPR), fluorescence, surface-enhanced Raman scattering, and quantized charging effect. These unique properties provide AuNPs as an excellent scaffold for ligand multiplexing, allowing accrued sensitivity for biomarker detection. Several reports have delved into the LSPR properties of the kinetics of biological interactions between the ligand and analyte. Tuneable radiative properties of AuNPs coupled with surface engineering allow facile detection of biomarkers in biological fluids. Herein, we have presented a comprehensive summary of distinct biomarkers generated from different molecular pathological processes in OA. An armamentarium of diagnostic methodologies such as aptamer conjugation, antibody coupling, ligand anchoring, and peptide decoration on the surface of AuNPs facilitates the identification and quantification of biomarkers. Additionally, a diverse range of sensing strategies for biomarker spotting, along with current challenges and future perspectives, have also been well delineated in the present manuscript.

Graphical Abstract

Advances of immunosensors based on noble metal composite materials for detecting procalcitonin

Procalcitonin (PCT) is a reliable biomarker for diagnosing and monitoring bacterial infections and sepsis. PCT exhibits good stability both in vivo and in vitro, and its levels drastically increase in response to bacterial infection or inflammatory reactions in the human body, making it a dependable indicator for sepsis diagnosis and monitoring with significant implications for clinical diagnosis and treatment guidance. Currently, immunosensors are widely utilized in PCT detection due to their high sensitivity and low detection limits. Noble metals, because of their excellent electronic conductivity, biocompatibility, and superior physicochemical properties, are extensively combined with other materials to play a pivotal role in the construction of PCT immunosensors. This review summarizes the research progress on PCT antigen immunosensors based on noble metal composite materials, encompassing the classification and principles of immunosensors. Starting from noble metals, which are widely used as electrode materials in sensors, the review categorizes and discusses the carbon materials, metal oxides, metal sulfides, and other composites with noble metals. The review also elaborates on the influence of sensitive materials on the performance of immunosensors. Finally, the review discusses and anticipates the challenges and future opportunities for the research on PCT antigen immunosensors using noble metal-composite nanomaterials, providing new insights and directions for their application in the treatment and clinical management of sepsis and other diseases.

Advancements in synthesis, immobilization, characterization, and multifaceted applications of silver nanoparticles: A comprehensive review

Silver nanoparticles (AgNPs) have attracted significant interest in recent years owing to their unique physicochemical properties, including antimicrobial reduction capabilities, photocatalytic activity, self-cleaning features, superhydrophobicity, and electrical conductivity. Their characteristics render them highly advantageous for various textile, electronics, food and agriculture, water treatment, and biomedical applications. This detailed analysis explores the recent benefits and drawbacks of various synthesis methods, immobilization techniques, and characterization of AgNPs while emphasizing novel strategies that improve their functionality across different substrates. A comprehensive analysis is conducted on various synthesis methods, including physical, chemical, and biological approaches. Additionally, immobilization techniques such as in-situ synthesis, pad-dry-cure, and printing on diverse substrates are thoroughly examined for their role in enhancing the functionality of textile substrates. Advanced characterization techniques, encompassing spectroscopic and microscopic methods, have been reviewed to provide a comprehensive understanding of AgNPs' structural and functional properties. This review highlights the progress made in synthesizing AgNPs, focusing on the ability to control their size and shape for targeted applications. Improved immobilization methods have significantly enhanced the stability of AgNPs in intricate environments. In contrast, advanced characterization techniques facilitate a more accurate control and assessment of the properties of AgNPs. The utilization of AgNPs as an antimicrobial agent for surface and food protection, medical devices, antiviral agents, and therapeutic tools showcases their extensive influence across the field. The cytotoxic effects of AgNPs on the human body have been thoroughly examined. This review examines recent advancements in AgNPs to encourage additional research and the development of innovative formulations. It also highlights future perspectives and research directions to effectively and sustainably utilize the potential of AgNPs.

Plasmonic Modulation of Gold Nanoplates on Multiwavelength Emission

Plasmonic regulation introduced by metallic nanoparticles is a useful method to improve the detection performance of plasmon-based systems. Herein, we observed a unique enhancement of surface plasmon-coupled emission (SPCE) using plate-shaped plasmonic nanostructures. By assembling Au nanoplates (Au NPLs) via electrostatic adsorption between the Au nanofilm and the quantum dot (QD) layer (630 nm), the fluorescence signal of SPCE was enhanced 90 times more than that of normal SPCE after the conditions were optimized. This enhancement was mainly induced by the intense localized electromagnetic field at the tip of Au NPLs and a novel plasmonic distribution around the "hot-spot" structure between the nanoparticle and Au nanofilm. These effectively mitigated the inherent signal quenching of SPCE and enhanced the emission signal of ultrathin samples on the surface of the NPL-modified Au nanofilm structure. This strategy can be used to improve the detection sensitivity and information integrity of SPCE-based biosensing and bioimaging systems containing ultrathin luminous layers. The different enhancement efficiencies for multiwavelengths were successfully obtained through various emission angles in light of the wavelength resolution of SPCE, thus verifying the existence and importance of energy-matching coupling, and the emission for the fluorophore with low excitation efficiency could also be detected. Benefiting from this, the Au NPL-modulated SPCE system could be a candidate for simultaneous multiwavelength enhancement and high-throughput detection in multicomponent analysis.

Automated machine learning in nanotoxicity assessment: A comparative study of predictive model performance

Computational modeling has earned significant interest as an alternative to animal testing of toxicity assessment. However, the process of selecting an appropriate algorithm and fine-tuning hyperparameters for the developing of optimized models takes considerable time, expertise, and an intensive search. The recent emergence of automated machine learning (autoML) approaches, available as user-friendly platforms, has proven beneficial for individuals with limited knowledge in ML-based predictive model development. These autoML platforms automate crucial steps in model development, including data preprocessing, algorithm selection, and hyperparameter tuning. In this study, we used seven previously published and publicly available datasets for oxides and metals to develop nanotoxicity prediction models. AutoML platforms, namely Vertex AI, Azure, and Dataiku, were employed and performance measures such as accuracy, F1 score, precision, and recall for these autoML-based models were then compared with those of conventional ML-based models. The results demonstrated clearly that the autoML platforms produced more reliable nanotoxicity prediction models, outperforming those built with conventional ML algorithms. While none of the three autoML platforms significantly outperformed the others, distinctions exist among them in terms of the available options for choosing technical features throughout the model development steps. This allows users to select an autoML platform that aligns with their knowledge of predictive model development and its technical features. Additionally, prediction models constructed from datasets with better data quality displayed, enhanced performance than those built from datasets with lower data quality, indicating that future studies with high-quality datasets can further improve the performance of those autoML-based prediction models.

Enhancing the performance of unitized regenerative proton exchange membrane fuel cells through microwave-synthesized chitosan based nanocomposites

The membrane electrode assembly (MEA) is a core component of unitized regenerative proton exchange membrane fuel cells (UR-PEMFCs). The studies aimed to improve the cell performance and reduce the cost of the MEAs for the widespread adoption of UR-PEMFCs. The present study focuses on modifications of MEA. For this purpose, an innovative nanocomposite electrocatalyst was developed by using a carbon-based support material containing platinum nanoparticles with a diameter of approximately 20-30 nm via microwave synthesis technique. The electrocatalyst was developed by a single-step process, consist of multi-walled carbon nanotubes (MWCNT), graphitic carbon nitride (g-C3N4), chitosan (Chi), and platinum nanoparticles (MWCNT/g-C3N4/Chi/Pt nanocomposite). With the development of this support material, a relatively economical and effective electrocatalyst was obtained by large surface area and using the platinum on this surface at the nano level. The prepared catalyst was applied to commercially available membrane electrode assemblies with an active area of 100 cm2. Single-cell and triple-stack performance tests were conducted, and an increase of 17.13 % in the electrolyzer mode and 16.98 % in the fuel cell mode was achieved in single-cell performance with this applied electrocatalyst. Furthermore, an enhancement of 16.96 % in the electrolyzer mode and 16.81 % in the fuel cell mode was discerned in the UR-PEMFC stack. Beside the experimental studies, a numerical model of the modified membrane properties has been developed and validated through experimental data.

Gold Nanoparticles-Based Colorimetric Immunoassay of Carcinoembryonic Antigen with Metal-Organic Framework to Load Quinones for Catalytic Oxidation of Cysteine

This work reported gold nanoparticles (AuNPs)-based colorimetric immunoassay with the Cu-based metal-organic framework (MOF) to load pyrroloquinoline quinone (PQQ) for the catalytic oxidation of cysteine. In this method, both Cu2+ and PQQ in the MOF could promote the oxidation of inducer cysteine by redox cycling, thus limiting the cysteine-induced aggregation of AuNPs and achieving dual signal amplification. Specifically, the recombinant carcinoembryonic antigen (CEA) targets were anchored on the MOF through the metal coordination interactions between the hexahistidine (His6) tag in CEA and the unsaturated Cu2+ sites in MOF. The CEA/PQQ-loaded MOF could be captured by the antibody-coated ELISA plate to catalyze the oxidation of cysteine. However, once the target CEA in the samples bound to the antibody immobilized on the plate surface, the attachment of CEA/PQQ-loaded MOF would be limited. Cysteine remaining in the solution would trigger the aggregation of AuNPs and cause a color change from red to blue. The target concentration was positively related to the aggregation and color change of AuNPs. The signal-on competitive plasmonic immunoassay exhibited a low detection limit with a linear range of 0.01-1 ng/mL. Note that most of the proteins in commercial ELISA kits are recombinant with a His6 tag in the N- or C-terminal, so the work could provide a sensitive plasmonic platform for the detection of biomarkers.

Breast cancer detection based on cancer antigen 15-3; emphasis on optical and electrochemical methods: A review

Cancer antigen 15-3 (CA 15-3) is a crucial marker used in the diagnosis and monitoring of breast cancer (BC). The demand for early and precise cancer detection has grown, making the creation of biosensors that are highly sensitive and specific essential. This review paper provides a thorough examination of the progress made in optical and electrochemical biosensors for detecting the cancer biomarker CA 15-3. We focus on explaining their fundamental principles, sensitivity, specificity, and potential for point-of-care applications. The performance attributes of these biosensors are assessed by considering their limits of detection, reaction times, and operational stability, while also making comparisons to conventional methods of CA 15-3 detection. In addition, we explore the incorporation of nanomaterials and innovative transducer components to improve the performance of biosensors. This paper conducts a thorough examination of recent studies to identify the existing obstacles. It also suggests potential areas for future research in this fast progressing field.The paper provides insights into their advancement and utilization to enhance patient outcomes. Both categories of biosensors provide significant promise for the detection of CA 15-3 and offer distinct advantages compared to conventional analytical approaches.

Assessing inorganic nanoparticle toxicity through omics approaches

In the last two decades, the development of nanotechnology has resulted in inorganic nanoparticles playing crucial roles in key industries, ranging from healthcare to energy technologies. For instance, gold and silver nanoparticles are widely used in rapid COVID-19 and flu tests, titania and zinc oxide nanoparticles are commonly found in cosmetic products, and superparamagnetic iron oxide nanoparticles have been clinically exploited as contrast agents and anti-anemia medicines. As a result, human exposure to nanomaterials is continuously increasing, raising concerns about their potential adverse health effects. Historically, the study of nanoparticle toxicity has largely relied on macroscopic observations obtained in different in vitro and in vivo models, resulting in readouts such as median lethal dose, biodistribution profile, and/or histopathological assessment. In recent years, omics methodologies, including transcriptomics, epigenomics, proteomics, metabolomics, and lipidomics, are increasingly used to characterize the biological interactions of nanomaterials, providing a better and broader understanding of their impact and mechanisms of toxicity. These approaches have been able to identify important genes and gene products that mediate toxicological effects, as well as endogenous functions and pathways dysregulated by nanoparticles. Omics methods improve our understanding of nanoparticle biology, and unravel mechanistic insights into nanomedicine-based therapies. This review aims to provide a deeper understanding and new perspectives of omics approaches to characterize the toxicity and biological interactions of inorganic nanoparticles, and improve the safety of nanoparticle applications.

Recent Advances in Phthalocyanine-Based Hybrid Composites for Electrochemical Biosensors

Biosensors are smart devices that convert biochemical responses to electrical signals. Designing biosensor devices with high sensitivity and selectivity is of great interest because of their wide range of functional operations. However, the major obstacles in the practical application of biosensors are their binding affinity toward biomolecules and the conversion and amplification of the interaction to various signals such as electrical, optical, gravimetric, and electrochemical signals. Additionally, the enhancement of sensitivity, limit of detection, time of response, reproducibility, and stability are considerable challenges when designing an efficient biosensor. In this regard, hybrid composites have high sensitivity, selectivity, thermal stability, and tunable electrical conductivities. The integration of phthalocyanines (Pcs) with conductive materials such as carbon nanomaterials or metal nanoparticles (MNPs) improves the electrochemical response, signal amplification, and stability of biosensors. This review explores recent advancements in hybrid Pcs for biomolecule detection. Herein, we discuss the synthetic strategies, material properties, working mechanisms, and integration methods for designing electrochemical biosensors. Finally, the challenges and future directions of hybrid Pc composites for biosensor applications are discussed.

NANO.PTML model for read-across prediction of nanosystems in neurosciences. computational model and experimental case of study

Neurodegenerative diseases involve progressive neuronal death. Traditional treatments often struggle due to solubility, bioavailability, and crossing the Blood-Brain Barrier (BBB). Nanoparticles (NPs) in biomedical field are garnering growing attention as neurodegenerative disease drugs (NDDs) carrier to the central nervous system. Here, we introduced computational and experimental analysis. In the computational study, a specific IFPTML technique was used, which combined Information Fusion (IF) + Perturbation Theory (PT) + Machine Learning (ML) to select the most promising Nanoparticle Neuronal Disease Drug Delivery (N2D3) systems. For the application of IFPTML model in the nanoscience, NANO.PTML is used. IF-process was carried out between 4403 NDDs assays and 260 cytotoxicity NP assays conducting a dataset of 500,000 cases. The optimal IFPTML was the Decision Tree (DT) algorithm which shown satisfactory performance with specificity values of 96.4% and 96.2%, and sensitivity values of 79.3% and 75.7% in the training (375k/75%) and validation (125k/25%) set. Moreover, the DT model obtained Area Under Receiver Operating Characteristic (AUROC) scores of 0.97 and 0.96 in the training and validation series, highlighting its effectiveness in classification tasks. In the experimental part, two samples of NPs (Fe3O4_A and Fe3O4_B) were synthesized by thermal decomposition of an iron(III) oleate (FeOl) precursor and structurally characterized by different methods. Additionally, in order to make the as-synthesized hydrophobic NPs (Fe3O4_A and Fe3O4_B) soluble in water the amphiphilic CTAB (Cetyl Trimethyl Ammonium Bromide) molecule was employed. Therefore, to conduct a study with a wider range of NP system variants, an experimental illustrative simulation experiment was performed using the IFPTML-DT model. For this, a set of 500,000 prediction dataset was created. The outcome of this experiment highlighted certain NANO.PTML systems as promising candidates for further investigation. The NANO.PTML approach holds potential to accelerate experimental investigations and offer initial insights into various NP and NDDs compounds, serving as an efficient alternative to time-consuming trial-and-error procedures.

Covalent organic frameworks (COFs) as carrier for improved drug delivery and biosensing applications

Porous organic frameworks (POFs) represent a significant subclass of nanoporous materials in the field of materials science, offering exceptional characteristics for advanced applications. Covalent organic frameworks (COFs), as a novel and intriguing type of porous material, have garnered considerable attention due to their unique design capabilities, diverse nature, and wide-ranging applications. The unique structural features of COFs, such as high surface area, tuneable pore size, and chemical stability, render them highly attractive for various applications, including targeted and controlled drug release, as well as improving the sensitivity and selectivity of electrochemical biosensors. Therefore, it is crucial to comprehend the methods employed in creating COFs with specific properties that can be effectively utilized in biomedical applications. To address this indispensable fact, this review paper commences with a concise summary of the different methods and classifications utilized in synthesizing COFs. Second, it highlights the recent advancements in COFs for drug delivery, including drug carriers as well as the classification of drug delivery systems and biosensing, encompassing drugs, biomacromolecules, small biomolecules and the detection of biomarkers. While exploring the potential of COFs in the biomedical field, it is important to acknowledge the limitations that researchers may encounter, which could impact the practicality of their applications. Third, this paper concludes with a thought-provoking discussion that thoroughly addresses the challenges and opportunities associated with leveraging COFs for biomedical applications. This review paper aims to contribute to the scientific community's understanding of the immense potential of COFs in improving drug delivery systems and enhancing the performance of biosensors in biomedical applications.

New Insights into Aptamers: An Alternative to Antibodies in the Detection of Molecular Biomarkers

Aptamers are short oligonucleotides with single-stranded regions or peptides that recently started to transform the field of diagnostics. Their unique ability to bind to specific target molecules with high affinity and specificity is at least comparable to many traditional biorecognition elements. Aptamers are synthetically produced, with a compact size that facilitates deeper tissue penetration and improved cellular targeting. Furthermore, they can be easily modified with various labels or functional groups, tailoring them for diverse applications. Even more uniquely, aptamers can be regenerated after use, making aptasensors a cost-effective and sustainable alternative compared to disposable biosensors. This review delves into the inherent properties of aptamers that make them advantageous in established diagnostic methods. Furthermore, we will examine some of the limitations of aptamers, such as the need to engage in bioinformatics procedures in order to understand the relationship between the structure of the aptamer and its binding abilities. The objective is to develop a targeted design for specific targets. We analyse the process of aptamer selection and design by exploring the current landscape of aptamer utilisation across various industries. Here, we illuminate the potential advantages and applications of aptamers in a range of diagnostic techniques, with a specific focus on quartz crystal microbalance (QCM) aptasensors and their integration into the well-established ELISA method. This review serves as a comprehensive resource, summarising the latest knowledge and applications of aptamers, particularly highlighting their potential to revolutionise diagnostic approaches.

Precision in cancer diagnostics: ultra-sensitive detection of MCF-7 breast cancer cells by gold nanostructure-enhanced electrochemical biosensing

Timely identification of cancers is pivotal in optimizing treatment efficacy and reducing their widespread impact. This study introduces a novel biosensor for the sensitive electrochemical detection of cancer cells overexpressing mucin 1 (MUC1), a well-established model for breast cancer. The sensor substrate comprises gold columnar nanostructures obtained through glancing angle deposition (GLAD) of copper nanostructures, subsequently replaced by gold via a facile galvanic replacement process. Functionalizing these gold nanostructures with aptamers targeting the MUC1 glycoproteins, a prominent cancer biomarker, enables specific recognition of MCF-7 breast cancer cells. The proposed electrochemical sensing platform offers several advantages, including high selectivity, a wide linear range of detection, a low detection limit of 30 cells per mL, and long-term stability, rendering this sensor highly desirable for definitive breast cancer diagnosis.

State-of-the-art nanosensors and kits for the detection of antibiotic residues in milk and dairy products

Antibiotic resistance is increasingly seen as a future concern, but antibiotics are still commonly used in animals, leading to their accumulation in humans through the food chain and posing health risks. The development of nanomaterials has opened up possibilities for creating new sensing strategies to detect antibiotic residues, resulting in the emergence of innovative nanobiosensors with different benefits like rapidity, simplicity, accuracy, sensitivity, specificity, and precision. Therefore, this comprehensive review provides pertinent and current insights into nanomaterials-based electrochemical/optical sensors for the detection of antibitic residues (ANBr) across milk and dairy products. Here, we first discuss the commonly used ANBs in real products, the significance of ANBr, and also their binding/biological properties. Then, we provide an overview of the role of using different nanomaterials on the development of advanced nanobiosensors like fluorescence-based, colorimetric, surface-enhanced Raman scattering, surface plasmon resonance, and several important electrochemical nanobiosensors relying on different kinds of electrodes. The enhancement of ANB electrochemical behavior for detection is also outlined, along with a concise overview of the utilization of (bio)recognition units. Ultimately, this paper offers a perspective on the future concepts of this research field and commercialized nanomaterial-based sensors to help upgrade the sensing techniques for ANBr in dairy products.

Advances in conductive hydrogels for neural recording and stimulation

The brain-computer interface (BCI) allows the human or animal brain to directly interact with the external environment through the neural interfaces, thus playing the role of monitoring, protecting, improving/restoring, enhancing, and replacing. Recording electrophysiological information such as brain neural signals is of great importance in health monitoring and disease diagnosis. According to the electrode position, it can be divided into non-implantable, semi-implantable, and implantable. Among them, implantable neural electrodes can obtain the highest-quality electrophysiological information, so they have the most promising application. However, due to the chemo-mechanical mismatch between devices and tissues, the adverse foreign body response and performance loss over time seriously restrict the development and application of implantable neural electrodes. Given the challenges, conductive hydrogel-based neural electrodes have recently attracted much attention, owing to many advantages such as good mechanical match with the native tissues, negligible foreign body response, and minimal signal attenuation. This review mainly focuses on the current development of conductive hydrogels as a biocompatible framework for neural tissue and conductivity-supporting substrates for the transmission of electrical signals of neural tissue to speed up electrical regeneration and their applications in neural sensing and recording as well as stimulation.

Exploiting the Specificity of CRISPR/Cas System for Nucleic Acids Amplification-Free Disease Diagnostics in the Point-of-Care

Rapid and reliable molecular diagnostics employing target nucleic acids and small biomarkers are crucial strategies required for the precise detection of numerous diseases. Although diagnoses based on nucleic acid recognition are some of the most efficient and precise procedures, these tests often require expensive equipment and skilled professionals. Recent advancements in diagnostic innovations, particularly those based on clustered regularly interspaced short palindromic repeats (CRISPR), aim to provide thorough screening at homes, in clinics, and in the field. In comparison to traditional molecular techniques like PCR, CRISPR/Cas-based detection, using the single-stranded nucleic acid trans-cleavage abilities of Cas12 or Cas13, shows significant potential as a molecular diagnostic tool. It offers benefits such as attomolar-level sensitivity, single-base precision, and rapid turnover rates. Both Cas enzymes demonstrate exceptional specificity and sensitivity, holding substantial promise in disease diagnostics and beyond. Consequently, various amplification-free CRISPR/Cas-based detection methods have emerged, aiming to maintain sensitivity despite the absence of pre-amplification. This allows for the detection of non-nucleic acid targets and facilitates integration into point-of-care settings. This Review highlights current advances in amplification-free CRISPR/Cas detection systems in disease diagnostics and investigates their utility in point-of-care settings. Furthermore, the mechanisms of alternative CRISPR-based amplification-free detection of other small molecules, aside from nucleic acids, for disease diagnosis will also be briefly discussed.

Nanoparticle Assembly: From Self-Organization to Controlled Micropatterning for Enhanced Functionalities

Nanoparticles form long-range micropatterns via self-assembly or directed self-assembly with superior mechanical, electrical, optical, magnetic, chemical, and other functional properties for broad applications, such as structural supports, thermal exchangers, optoelectronics, microelectronics, and robotics. The precisely defined particle assembly at the nanoscale with simultaneously scalable patterning at the microscale is indispensable for enabling functionality and improving the performance of devices. This article provides a comprehensive review of nanoparticle assembly formed primarily via the balance of forces at the nanoscale (e.g., van der Waals, colloidal, capillary, convection, and chemical forces) and nanoparticle-template interactions (e.g., physical confinement, chemical functionalization, additive layer-upon-layer). The review commences with a general overview of nanoparticle self-assembly, with the state-of-the-art literature review and motivation. It subsequently reviews the recent progress in nanoparticle assembly without the presence of surface templates. Manufacturing techniques for surface template fabrication and their influence on nanoparticle assembly efficiency and effectiveness are then explored. The primary focus is the spatial organization and orientational preference of nanoparticles on non-templated and pre-templated surfaces in a controlled manner. Moreover, the article discusses broad applications of micropatterned surfaces, encompassing various fields. Finally, the review concludes with a summary of manufacturing methods, their limitations, and future trends in nanoparticle assembly.

Innovative approaches for mycotoxin detection in various food categories

Mycotoxins (MTs), produced by filamentous fungi, represent a severe hazard to the health of humans and food safety, affecting the quality of various agricultural products. They can contaminate a wide range of foods, during any processing phase before or after harvest. Animals and humans who consume MTs-contaminated food or feed may experience acute or chronic poisoning, which may result in serious pathological consequences. Accordingly, developing rapid, easy, and accurate methods of MTs detection in food becomes highly urgent and critical as a quality control and to guarantee food safety and lower health hazards. In this review, we highlighted and discussed innovative approaches like biosensors, fluorescent polarization, capillary electrophoresis, infrared spectroscopy, and electronic noses for MT identification pointing out current challenges and future directions. The limitations, current challenges, and future directions of conventional detection methods versus innovative methods have also been highlighted and discussed.

Nanotechnology-based Nose-to-brain Delivery in Epilepsy: A NovelApproach to Diagnosis and Treatment

Epilepsy is a serious neurological disease, and scientists have a significant challenge in developing a noninvasive treatment for the treatment of epilepsy. The goal is to provide novel ideas for improving existing and future anti-epileptic medications. The injection of nano treatment via the nose to the brain is being considered as a possible seizure control method. Various nasal medicine nanoformulations have the potential to cure epilepsy. Investigations with a variety of nose-to-brain dosing methods for epilepsy treatment have yielded promising results. After examining global literature on nanotechnology and studies, the authors propose nasal administration with nanoformulations as a means to successfully treat epilepsy. The goal of this review is to look at the innovative application of nanomedicine for epilepsy treatment via nose-to-brain transfer, with a focus on the use of nanoparticles for load medicines. When nanotechnology is combined with the nose to brain approach, treatment efficacy can be improved through site specific delivery. Furthermore, this technique of administration decreases adverse effects and patient noncompliance encountered with more traditional procedures.

Material Breakthroughs in Smart Food Monitoring: Intelligent Packaging and On-Site Testing Technologies for Spoilage and Contamination Detection

Despite extensive commercial and regulatory interventions, food spoilage and contamination continue to impose massive ramifications on human health and the global economy. Recognizing that such issues will be significantly eliminated by the accurate and timely monitoring of food quality markers, smart food sensors have garnered significant interest as platforms for both real-time, in-package food monitoring and on-site commercial testing. In both cases, the sensitivity, stability, and efficiency of the developed sensors are largely informed by underlying material design, driving focus toward the creation of advanced materials optimized for such applications. Herein, a comprehensive review of emerging intelligent materials and sensors developed in this space is provided, through the lens of three key food quality markers - biogenic amines, pH, and pathogenic microbes. Each sensing platform is presented with targeted consideration toward the contributions of the underlying metallic or polymeric substrate to the sensing mechanism and detection performance. Further, the real-world applicability of presented works is considered with respect to their capabilities, regulatory adherence, and commercial potential. Finally, a situational assessment of the current state of intelligent food monitoring technologies is provided, discussing material-centric strategies to address their existing limitations, regulatory concerns, and commercial considerations.

Application of Ag nanoparticles decorated on graphene nanosheets for electrochemical sensing of CEA as an important cancer biomarker

In this research, a novel biosensing platform is described based on graphene nano-sheets decorated with Ag nano-particles (GNSs@Ag NPs). The designed electrochemical aptasensor was employed to determine carcinoembryonic antigen (CEA), an important cancer biomarker. Inherently, aptasensing interfaces provide high sensitivity for CEA tumor marker because of the high specific surface area and excellent conductivity of the prepared GNSs@Ag NPs composite. The established assay demonstrated a wide linear range from 0.001 pg/mL to 10 pg/mL with a correlation coefficient of 0.9958 and low detection limit (DL) of 0.5 fg/mL based on S/N = 3 protocol. The derived biosensor illustrated acceptable selectivity towards common interfering species including HER2, VEGF, IgG, MUC1 and CFP10. In addition, the aptsensor showed good reproducibility and fast response time. The applicability of the suggested strategy in human serum samples was also examined and compared to the commercial enzyme-linked immunosorbent assay (ELISA). Based on the experimental data, it was found that the discussed sensing platform can be exerted in the monitoring of CEA in different cancers for early diagnosis.

Novel biosynthesis of gold nanoparticles for multifunctional applications: Electrochemical detection of hydrazine and treatment of gastric cancer

In this work, an environmentally friendly strategy was used to synthesize gold nanoparticles (Au NPs) using Olea europaea (olive) fruit. Transmission electron microscopy (TEM), UV-Vis spectroscopy, X-ray diffraction (XRD) and energy-dispersive X-ray (EDX) were used to characterize the physicochemical properties of the synthesized NPs. An Au NPs modified glassy carbon electrode was used to investigate the direct electrochemical oxidation of hydrazine. The suggested hydrazine sensor has good performance, such as a wide linear range (2.5-275 μM), low limit of detection (0.09 μM), notable selectivity and excellent reproducibility (RSD = 2.2%). The in-vitro cytotoxicity of three human cancer cell lines (KATOIII, NCI-N87, and SNU-16) was also explored with various concentrations of Au NPs prepared from olive fruit extract. Bio-synthesized Au NPs were found to have cytotoxic properties against gastric cancer in humans based on MTT assay protocol. The obtained results show that green synthesized Au NPs can be successfully employed in electrochemical sensing and cancer treatment applications.

Analysis of temperature behavior in biological tissue in photothermal therapy according to laser irradiation angle

The type of death of biological tissue varies with temperature and is broadly classified as apoptosis and necrosis. A new treatment called photothermal therapy is being studied on this basis. Photothermal therapy is a treatment technique based on photothermal effects and has the advantage of not requiring incisions and, therefore, no bleeding. In this study, a numerical analysis of photothermal therapy for squamous cell carcinoma was performed. Photothermal agents used were gold nanoparticles, and the photothermal therapy effect was confirmed by changing the angle of the laser irradiating the tumor tissue. The effectiveness of photothermal therapy was quantitatively assessed on the basis of three apoptotic variables. Further, the volume fraction of gold nanoparticles in the tumor tissue and laser intensity with optimal therapeutic effect for different laser irradiation angles were studied. Thus, the findings of this study can aid the practical implementation of photothermal therapy in the future.

Employing Pd nanoparticles decorated on halloysite nanotube/carbon composite for electrochemical aptasensing of HER2 in breast cancer patients

An effective biosensing platform is described based on halloysite nanotube/carbon composite decorated with Pd nanoparticles (HNT/C@Pd NPs). A novel electrochemical aptasensor was designed using the proposed nano-platform to determine human epidermal growth factor receptor 2 (HER2), a breast cancer biomarker. Inherently, aptasensing interfaces provide high sensitivity and selectivity for tumor markers owing to the high specific surface area of HNT/C and good conductivity stems from deposition of Pd NPs into HNT/C composite. With a correlation coefficient of 0.996, the electrochemical aptasensor demonstrated a wide linear range from 0.03 ng/mL to 9 ng/mL. The limit of detection (LOD) of the established assay was 8 pg/mL based on S/N = 3 method. Further, the designed biosensor demonstrated acceptable selectivity, good reproducibility, and high stability. The applicability of the impedimetric sensor in human serum samples was also examined and compared to enzyme-linked immunosorbent assay (ELISA) assay (p-value >0.05). Based on the results, it was found that the proposed methodology can be used in quantification of breast cancer markers for early diagnosis and treatment.

Current Trends on the Effects of Metal-Based Nanoparticles on Microbial Ecology

The growing field of nanotechnology and its many applications have led to the irregular release of nanoparticles (NPs), with unintended effects on the environment and continued contamination of water bodies. Metallic NPs are used more frequently in extreme environmental conditions due to their higher efficiency, which attracts more attention in various applications. Due to improper pre-treatment of biosolids, inefficient wastewater treatment practices, and other unregulated agricultural practices continue to contaminate the environment. In particular, the uncontrolled use of NPs in various industrial applications has led to damage to the microbial flora and caused irreplaceable damage to animals and plants. This study focuses on the effect of different doses, types, and compositions of NP on the ecosystem. The review also mentions the impact of various metallic NPs on microbial ecology, their interactions with microorganisms, ecotoxicity studies, and dosage evaluation of the NPs, mainly focused on the review article. However, further research is still needed to understand the complexity of interactions between NPs and microbes in soil and aquatic ecosystems.

Artificial neural network approach for prediction of AuNPs biosynthesis by Streptomyces flavolimosus, characterization, antitumor potency in-vitro and in-vivo against Ehrlich ascites carcinoma

Gold nanoparticles (AuNPs) have emerged as promising and versatile nanoparticles for cancer therapy and are widely used in drug and gene delivery, biomedical imaging, diagnosis, and biosensors. The current study describes a biological-based strategy for AuNPs biosynthesis using the cell-free supernatant of Streptomyces flavolimosus. The biosynthesized AuNPs have an absorption peak at 530-535 nm. The TEM images indicate that AuNPs were spherical and ranged in size from 4 to 20 nm. The surface capping molecules of AuNPs are negatively charged, having a Zeta potential of - 10.9 mV. FTIR analysis revealed that the AuNPs surface composition contains a variety of functional groups as -OH, C-H, N-, C=O, NH3+, amine hydrochloride, amide group of proteins, C-C and C-N. The bioprocess variables affecting AuNPs biosynthesis were optimized by using the central composite design (CCD) in order to maximize the AuNPs biosynthesis. The maximum yield of AuNPs (866.29 µg AuNPs/mL) was obtained using temperature (35 °C), incubation period (4 days), HAuCl4 concentration (1000 µg/mL) and initial pH level 6. Comparison was made between the fitness of CCD versus Artificial neural network (ANN) approach based on their prediction and the corresponding experimental results. AuNPs biosynthesis values predicted by ANN exhibit a more reasonable agreement with the experimental result. The anticancer activities of AuNPs were assessed under both in vitro and in vivo conditions. The results revealed a significant inhibitory effect on the proliferation of the MCF-7 and Hela carcinoma cell lines treated with AuNPs with IC50 value of 13.4 ± 0.44 μg/mL and 13.8 ± 0.45 μg/mL for MCF-7 and Hela cells; respectively. Further, AuNPs showed potential inhibitory effect against tumor growth in tumor-bearing mice models. AuNPs significantly reduced the tumor volume, tumor weight, and decreased number of viable tumor cells in EAC bearing mice.

Effect of gold nanoparticles distribution radius on photothermal therapy efficacy

Lasers are used in various fields, however, in the medical field, they are mainly used for incision or chemotherapy. Photothermal therapy (PTT) is an anti-cancer treatment technique that uses lasers and the photothermal effect to increase the temperature of tumor tissue and induce its death. In this study, the therapeutic effect of PTT using gold nanoparticles as a photothermal converter was analyzed numerically for the occurrence of squamous cell carcinoma inside a skin section consisting four layers. Numerical modeling was implemented to calculate the temperature distribution inside the biological tissue while varying the distribution radius of gold nanoparticles in the tumor tissue, the number of injections, and the intensity of the irradiating laser. For the given situation, the optimal treatment effect was observed when the distribution radius ratio of the injected gold nanoparticles (GNPs) was 1, the number of injections was 7, and the intensity of the irradiated laser was 52 mW. Three apoptotic variables were used to quantitively evaluate the effect of PTT in each case and thus suggest the optimal treatment effect. However, although the temperature range at which apoptosis occurs is known, the maintenance of that temperature range is still under research and the temporal influence of apoptosis remains to be determined.

Iridium-Based Nanohybrids: Synthesis, Characterization, Optical Limiting, and Nonlinear Optical Properties

The present work reports on the synthesis and characterization of iridium (Ir)-based nanohybrids with variable chemical compositions. More specifically, highly stable polyvinylpyrrolidone (PVP) nanohybrids of the PVP-IrO₂ and PVP-Ir/IrO₂ types, as well as non-coated Ir/IrO₂ nanoparticles, are synthesized using different synthetic protocols and characterized in terms of their chemical composition and morphology via X-ray photoelectron spectroscopy (XPS) and scanning transmission electron microscopy (STEM), respectively. Furthermore, their nonlinear optical (NLO) response and optical limiting (OL) efficiency are studied by means of the Z-scan technique, employing 4 ns laser pulses at 532 and 1064 nm. The results demonstrate that the PVP-Ir/IrO₂ and Ir/IrO₂ systems exhibit exceptional OL performance, while PVP-IrO₂ presents very strong saturable absorption (SA) behavior, indicating that the present Ir-based nanohybrids could be strong competitors to other nanostructured materials for photonic and optoelectronic applications. In addition, the findings denote that the variation in the content of IrO₂ nanoparticles by using different synthetic pathways significantly affects the NLO response of the studied Ir-based nanohybrids, suggesting that the choice of the appropriate synthetic method could lead to tailor-made NLO properties for specific applications in photonics and optoelectronics.

Biosynthesis of uniform fluorescent-stable telluride quantum dots in Escherichia coli and its detection of Fe3+ in water

Quantum dots (QDs) containing zinc (Zn) and tellurium (Te) have low toxicity and excellent optoelectronic properties, which make them ideal fluorescent probes for use in environmental monitoring. However, their size/shape distribution synthesized by existing methods is not as good as that of other nanoparticles, thus limiting their application. Exploring whether this kind of QD can be biosynthesized and whether it can act as a nanoprobe are favorable attempts to expand the synthesis method and the application of QDs. Telluride QDs were biosynthesized in Escherichia coli cells. The nanoparticles were characterized by transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray spectroscopy (EDX), and inductively coupled plasma-atomic emission spectrometry (ICP‒AES), indicating that they were Zn₃STe₂ QDs. The QDs were monodispersed, spherical and fluorescently stable, with a uniform particle size of 3.05 ± 0.48 nm. The biosynthesis conditions of the QDs, including substrate concentrations and their process time, were optimized respectively. It was verified that the cysE and cysK genes were involved in the biosynthesis of telluride QDs. The biosynthesis ability of the QDs was improved by knocking out the tehB gene and overexpressing the pckA gene. Escherichia coli BW25113 cells that synthesized Zn₃STe₂ QDs were used as environmentally friendly fluorescent bioprobes to specifically select and quantitatively detect Fe³⁺ in water with a low limit of detection (2.62 μM). The fluorescent cells were also photobleach resistant and had good fluorescence stability. This study expands on the synthesis method of telluride QDs and the application of fluorescent probes.

Plasma-based one-step synthesis of tungsten oxide nanoparticles in short time

Nanostructured tungsten oxide as a semiconductor metal oxide has attracted considerable attention due to its promising and notable properties. Tungsten oxide nanoparticles can be used in a wide range of technology and applications such as catalysts, sensors, supercapacitors, etc. In this study, nanoparticles were prepared via a simple method using an atmospheric glow discharge. This modern approach had many advantages such as high efficiency and straightforward function. Synthesis performance was done in only one step and a short time which started at 2 min and had been continued for 8 min. The X-ray diffraction pattern revealed the formation [Formula: see text] at atmospheric pressure. The synthesized particle size was characterized using scanning electron microscopy. According to the experimental results, the synthesis was greatly influenced by the applied voltage, gas type, and plasma forming side over the water surface. Increases in electrical potential difference and thermal conductivity of the gas led to a greater rate of synthesis, while this rate was reduced by decreasing the atomic weight of the gas.

Recent advances in the combination of cellular therapy with stem cells and nanoparticles after a spinal cord injury

Background

Currently, combined therapies could help to reduce long-term sequelae of spinal cord injury (SCI); stem cell therapy at the site of injury in combination with other therapies has shown very promising results that can be transferred to the clinical field. Nanoparticles (NPs) are versatile technologies with applications to medical research for treatments of SCI since they could deliver therapeutic molecules to the target tissue and may help to reduce the side effects of non-targeted therapies. This article's purpose is to analyze and concisely describe the diverse cellular therapies in combination with NPs and their regenerative effect after SCI.

Methods

We reviewed the literature related to combinatory therapy for motor impairment following SCI that has been published by Web of Science, Scopus, EBSCO host, and PubMed databases. The research covers the databases from 2001 to December 2022.

Result

Animal models of SCI have shown that the combination of NPs plus stem cells has a positive impact on neuroprotection and neuroregeneration. Further research is required to better understand the effects and benefits of SCI on a clinical level; therefore, it is necessary to find and select the most effective molecules that are capable of exacerbating the neurorestorative effects of the different stem cells and then try them out on patients after SCI. On the other hand, we consider that synthetic polymers such as poly [lactic-co-glycolic acid] (PLGA) could be a candidate for the design of the first therapeutic strategy that combines NPs with stem cells in patients with SCI. The reasons for the selection are that PLGA has shown important advantages over other NPs, such as being biodegradable, having low toxicity levels, and high biocompatibility; In addition, researchers could control the release time and the biodegradation kinetics, and most importantly, it could be used as NMs on other clinical pathologies (12 studies on www.clinicaltrials.gov) and has been approved by the Federal Food, Drug, and Cosmetic Act (FDA).

Conclusion

The use of cellular therapy and NPs may be a worthwhile alternative for SCI therapy; however, it is expected that the data obtained from interventions after SCI reflect an important variability of molecules combined with NPs. Therefore, it is necessary to properly define the limits of this research to be able to continue to work on the same line. Consequently, the selection of a specific therapeutic molecule and type of NPs plus stem cells are crucial to evaluate its application in clinical trials.

Gold Nanoparticle-Based Plasmonic Biosensors

One of the emerging technologies in molecular diagnostics of the last two decades is the use of gold nanoparticles (AuNPs) for biosensors. AuNPs can be functionalized with various biomolecules, such as nucleic acids or antibodies, to recognize and bind to specific targets. AuNPs present unique optical properties, such as their distinctive plasmonic band, which confers a bright-red color to AuNP solutions, and their extremely high extinction coefficient, which makes AuNPs detectable by the naked eye even at low concentrations. Ingenious molecular mechanisms triggered by the presence of a target analyte can change the colloidal status of AuNPs from dispersed to aggregated, with a subsequent visible change in color of the solution due to the loss of the characteristic plasmonic band. This review describes how the optical properties of AuNPs have been exploited for the design of plasmonic biosensors that only require the simple mixing of reagents combined with a visual readout and focuses on the molecular mechanisms involved. This review illustrates selected examples of AuNP-based plasmonic biosensors and promising approaches for the point-of-care testing of various analytes, spanning from the viral RNA of SARS-CoV-2 to the molecules that give distinctive flavor and color to aged whisky.

Biomedical applications of aptamer-modified chitosan nanomaterials: An updated review

Among polysaccharides of environmental and economic interest, chitosan (CS) is receiving much attention, particularly in the food and biotechnology industries to encapsulate active food ingredients and immobilize enzymes. CS nanoparticles (CS NPs) combine the intrinsic beneficial properties of both natural polymers and nanoscale particles such as quantum size effect, biocompatibility, biodegradability, and ease of modification, and have great potential for bioimaging, drug delivery, and biosensing applications. Aptamers are single-stranded oligonucleotides that can fold into predetermined structures and bind to the corresponding biomolecules. They are mainly used as targeting ligands in biosensors, disease diagnostic kits and treatment strategies. They can deliver contrast agents and drugs into cancer cells and tissues, control microorganism growth and precisely target pathogens. Aptamer-conjugated CS NPs can significantly improve the efficacy of conventional therapies, minimize their side effects on normal tissues, and overcome the enhanced permeability retention (EPR) effect. Further, aptamer-conjugated carbohydrate-based nanobiopolymers have shown excellent antibacterial and antiviral properties and can be used to develop novel biosensors for the efficient detection of antibiotics, toxins, and other biomolecules. This updated review aims to provide a comprehensive overview of the bioapplications of aptamer-conjugated CS NPs used as innovative diagnostic and therapeutic platforms, their limitations, and potential future directions.

Latest advances in biomimetic nanomaterials for diagnosis and treatment of cardiovascular disease

Cardiovascular disease remains one of the leading causes of death in China, with increasingly serious negative effects on people and society. Despite significant advances in preventing and treating cardiovascular diseases, such as atrial fibrillation/flutter and heart failure over the last few years, much more remains to be done. Therefore, developing innovative methods for identifying and managing cardiovascular disorders is critical. Nanomaterials provide multiple benefits in biomedicine, primarily better catalytic activity, drug loading, targeting, and imaging. Biomimetic materials and nanoparticles are specially combined to synthesize biomimetic nanoparticles that successfully reduce the nanoparticles' toxicity and immunogenicity while enhancing histocompatibility. Additionally, the biological targeting capability of nanoparticles facilitates the diagnosis and therapy of cardiovascular disease. Nowadays, nanomedicine still faces numerous challenges, which necessitates creating nanoparticles that are highly selective, toxic-free, and better clinically applicable. This study reviews the scientific accomplishments in this field over the past few years covering the classification, applications, and prospects of noble metal biomimetic nanozymes and biomimetic nanocarriers.

Nanoceria: an innovative strategy for cancer treatment

Nanoceria or cerium oxide nanoparticles characterised by the co-existing of Ce³⁺ and Ce⁴⁺ that allows self-regenerative, redox-responsive dual-catalytic activities, have attracted interest as an innovative approach to treating cancer. Depending on surface characteristics and immediate environment, nanoceria exerts either anti- or pro-oxidative effects which regulate reactive oxygen species (ROS) levels in biological systems. Nanoceria mimics ROS-related enzymes that protect normal cells at physiological pH from oxidative stress and induce ROS production in the slightly acidic tumour microenvironment to trigger cancer cell death. Nanoceria as nanozymes also generates molecular oxygen that relieves tumour hypoxia, leading to tumour cell sensitisation to improve therapeutic outcomes of photodynamic (PDT), photothermal (PTT) and radiation (RT), targeted and chemotherapies. Nanoceria has been engineered as a nanocarrier to improve drug delivery or in combination with other drugs to produce synergistic anti-cancer effects. Despite reported preclinical successes, there are still knowledge gaps arising from the inadequate number of studies reporting findings based on physiologically relevant disease models that accurately represent the complexities of cancer. This review discusses the dual-catalytic activities of nanoceria responding to pH and oxygen tension gradient in tumour microenvironment, highlights the recent nanoceria-based platforms reported to be feasible direct and indirect anti-cancer agents with protective effects on healthy tissues, and finally addresses the challenges in clinical translation of nanoceria based therapeutics.

Advances in the Translation of Electrochemical Hydrogel-Based Sensors

Novel biomaterials for bio- and chemical sensing applications have gained considerable traction in the diagnostic community with rising trends of using biocompatible and lowly cytotoxic material. Hydrogel-based electrochemical sensors have become a promising candidate for their swellable, nano-/microporous, and aqueous 3D structures capable of immobilizing catalytic enzymes, electroactive species, whole cells, and complex tissue models, while maintaining tunable mechanical properties in wearable and implantable applications. With advances in highly controllable fabrication and processability of these novel biomaterials, the possibility of bio-nanocomposite hydrogel-based electrochemical sensing presents a paradigm shift in the development of biocompatible, "smart," and sensitive health monitoring point-of-care devices. Here, recent advances in electrochemical hydrogels for the detection of biomarkers in vitro, in situ, and in vivo are briefly reviewed to demonstrate their applicability in ideal conditions, in complex cellular environments, and in live animal models, respectively, to provide a comprehensive assessment of whether these biomaterials are ready for point-of-care translation and biointegration. Sensors based on conductive and nonconductive polymers are presented, with highlights of nano-/microstructured electrodes that provide enhanced sensitivity and selectivity in biocompatible matrices. An outlook on current challenges that shall be addressed for the realization of truly continuous real-time sensing platforms is also presented.

Engineering gold nanoparticles for molecular diagnostics and biosensing

Advances in nanotechnology and medical science have spurred the development of engineered nanomaterials and nanoparticles with particular focus on their applications in biomedicine. In particular, gold nanoparticles (AuNPs) have been the focus of great interest, due to their exquisite intrinsic properties, such as ease of synthesis and surface functionalization, tunable size and shape, lack of acute toxicity and favorable optical, electronic, and physicochemical features, which possess great value for application in biodetection and diagnostics purposes, including molecular sensing, photoimaging, and application under the form of portable and simple biosensors (e.g., lateral flow immunoassays that have been extensively exploited during the current COVID-19 pandemic). We shall discuss the main properties of AuNPs, their synthesis and conjugation to biorecognition moieties, and the current trends in sensing and detection in biomedicine and diagnostics. This article is categorized under: Diagnostic Tools > Biosensing Diagnostic Tools > In Vitro Nanoparticle-Based Sensing Diagnostic Tools > In Vivo Nanodiagnostics and Imaging.

Advanced Plasmonic Nanoparticle-Based Techniques for the Prevention, Detection, and Treatment of Current COVID-19

Coronavirus is an ongoing global pandemic caused by severe acute respiratory syndrome coronavirus 2. Coronavirus disease 2019 known as COVID-19 is the worst pandemic since World War II. The outbreak of COVID-19 had a significant repercussion on the health, economy, politics, and environment, making coronavirus-related issues more complicated and becoming one of the most challenging pandemics of the last century with deadly outcomes and a high rate of the reproduction number. There are thousands of different types - or variants - of COVID circulating across the world. Viruses mutate all the time; it emphasizes the critical need for the designing of efficient vaccines to prevent virus infection, early and fast diagnosis, and effective antiviral and protective therapeutics. In this regard, the use of nanotechnology offers new opportunities for the development of novel strategies in terms of prevention, diagnosis, and treatment of COVID-19. This review presents an outline of the platforms developed using plasmonic nanoparticles in the detection, treatment, and prevention of SARS-CoV-2. We select the best strategies in each of these approaches. The properties of metallic plasmon NPs and their relevance in the development of novel point-of-care diagnosis approaches for COVID-19 are highlighted. Also, we discuss the current challenges and the future perspectives looking towards the clinical translation and the commercial aspects of nanotechnology and plasmonic NP-based diagnostic tools and therapy to fight COVID-19 pandemic. The article could be of significance for researchers dedicated to developing suitable plasmonic detection tools and therapy approaches for COVID-19 viruses and future pandemics.

Selenium-based nanomaterials for biosensing applications

The unique chemical and physical features of nanomaterials make them ideal for developing new and better sensing devices, particularly biosensors. Various types of nanoparticles, including metal, oxide, and semiconductor nanostructures, have been utilized to manufacture biosensors, and each kind of nanoparticle plays a unique role in the sensing system. Nanoparticles provide critical roles such as immobilizing biomolecules, catalyzing electrochemical processes, enhancing electron transport between electrode surfaces and proteins, identifying biomolecules, and even functioning as the reactant for the catalytic reaction. Among all the potential nanosystems to be used in biosensors, selenium nanoparticle (SeNP) features have sparked a growing interest in their use in bridging biological recognition events and signal transduction, as well as in developing biosensing devices with novel applications for identification, quantification, and study of different analytes of biological relevance. The optical, physical, and chemical characteristics of differently shaped SeNPs opened up a world of possibilities for developing biosensors of biomedical interest. The outstanding biocompatibility, conductivity, catalytic characteristics, high surface-to-volume ratio, and high density of SeNPs have enabled their widespread use in developing electrochemical biosensors with superior analytical performance compared to other designs of biosensors. This review summarizes recent and ongoing advances, current challenges, and future research perspectives on real-world applications of Se-based nanobiosensors to detect biologically relevant analytes such as hydrogen peroxide, heavy metals, or glucose. Due to the superior properties and multifunctionality of Se-NPs biosensors, these structures can open up considerable new horizons in the future of healthcare and medicine.

Remediation of Water Using a Nanofabricated Cellulose Membrane Embedded with Silver Nanoparticles

The removal of pesticide pollution is imperative, because of their high environmental load and persistence, and their potential for bioaccumulation in, and toxicity to the environment. Most pesticides are found to be toxic even at trace levels. AgNPs can be effectively used for the adsorption of pesticides, and the incorporation of the AgNPs onto a support polymeric membrane enhances their effectiveness and reduces the potential unwanted consequences of intentionally adding free nanoparticles to the environment. Here, silver nanoparticles (AgNPs) were synthesized using a reliable, eco-friendly, and one-step "green" method, by reacting Mentha Piperita (mint) extract with AgNO₃ aqueous solution at 60 °C in a microwave. The resulting high surface area nanoparticles are both economic and effective environmental remediation agents, playing a promising role in the elimination of aquatic pesticide pollution. Embedding the nanoparticles into a cellulose membrane at a low concentration (0.1 g) of AgNPs was shown to result in effectively adsorption of representative pesticides (Cypermethrin, Paraquat, and Cartap) within 60 min, while increasing the concentration of nanoparticles incorporated into the membrane further enhanced the removal of the exemplar pesticides from water. The high adsorption capacity makes the cellulose-AgNPs membrane an excellent substrate for the remediation of pesticide-polluted water.

Rapid Synthesis of Metal Nanoparticles Using Low-Temperature, Low-Pressure Argon Plasma Chemistry and Self-Assembly

The synthesis of metal nanoparticles has become a priority for the advancement of nanotechnology. In attempts to create these nanoparticles, several different methods: chemistry, physics, and biology, have all been used. In this study, we report the reduction of cations using argon plasma chemistry to produce nanoparticles of gold (AuNPs), silver (AgNPs), and copper (CuNPs). Although other groups have used plasma-reduction methods to synthesize metal nanoparticles from their cation counterparts, these approaches often require plasma|liquid state interactions, high temperature, specific combinations of gases, and extended treatment times (>10 minutes), for which only specific cations (noble or non-noble) may be reduced. As a result, we have developed a non-thermal, low-pressure argon-plasma|solid state approach for the reduction of both noble and non-noble cations. More specifically, when 50-μL droplets of 2-mM solutions of gold(III) chloride, silver nitrate, or copper(II) sulfate are exposed to vacuum, they undergo an evaporation process. As the pressure in the chamber decreases to 220 mtorr, the droplets become completely evaporated, leaving behind a metal precursor. Nucleation and growth studies reveal that when the metal precursors of gold(III) chloride, silver nitrate, and copper(II) sulfate are treated with 80 watts of argon plasma for 5, 60, and 150 seconds, respectively, nanoparticles could be synthesized with efficiency rates of upwards of 98%. The size of nanoparticles synthesized in this work was studied using Scanning Electron Microscopy, and the scattering properties of the nanoparticles was studied using UV/Vis spectroscopy. Transmission Electron Microscopy with corresponding elemental analysis was also very useful in confirming the identity of the synthesized nanoparticles. The results from this study reveal that we have synthesized metal nanoparticles with distinct chemical and physical properties. Scanning Electron Microscopy depicts AgNPs with a round-shape and diameters from 40 - 80 nm, while AuNPs were hexagonal, with sizes from 40 - 80 nm, and CuNPs were rod-shaped, with dimensions 40 by 160 nm. Our findings demonstrate that the argon plasma approach used in this study is a rapid, green, and versatile reduction method for the synthesis of both noble and non-noble metal nanoparticles.

The recent advancements in the early detection of cancer biomarkers by DNAzyme-assisted aptasensors

Clinical diagnostics rely heavily on the detection and quantification of cancer biomarkers. The rapid detection of cancer-specific biomarkers is of great importance in the early diagnosis of cancers and plays a crucial role in the subsequent treatments. There are several different detection techniques available today for detecting cancer biomarkers. Because of target-related conformational alterations, high stability, and target variety, aptamers have received considerable interest as a biosensing system component. To date, several sensitivity-enhancement strategies have been used with a broad spectrum of nanomaterials and nanoparticles (NPs) to improve the limit and sensitivity of analyte detection in the construction of innovative aptasensors. The present article aims to outline the research developments on the potential of DNAzymes-based aptasensors for cancer biomarker detection.

Gold nanorod-based multiplex bioanalytical assay for the detection of CYFRA 21-1 and CA-125: towards oral cancer diagnostics

The study emphasizes the application of gold nanorods (GNRs) with different aspect ratios (ARs) for the development of multiplex assay for oral cancer detection. The tunable optical properties of the GNRs that rely on the geometrical alterations of the nanostructure and the corresponding change in the refractive indices of the local environment form the basis of the label-free biosensing mechanism. In the present work, two GNRs with AR 2.1 and AR 3.9 exhibiting LSPR at 620 and 775 nm were used for sensing oral cancer biomarkers (Cyfra 21-1 and CA-125). Clinically relevant salivary concentrations of CYFRA 21-1 and CA-125 were taken into consideration for designing the assay range. Herein, the antibodies against Cyfra 21-1 and CA-125 have been employed as biospecific probes to functionalize the GNRs with different ARs. Molecular interactions that induce a spectral shift of distinct plasmon band maxima facilitated quantitative assessment of the target analyte. The GNR bioprobe employed for sensing Cyfra 21-1 had a wide linear detection range of 0.496-48.4 ng mL^-1 with a detection limit as low as 0.84 ng mL^-1 and for CA-125 the detection range was 5-320 U mL^-1 with a detection limit of 1.6 U mL^-1. The individual GNR bioprobe also showed high specificity against several interferents. For multiplexed biosensing, the plasmon spectra of the GNR bioprobe mixture showed distinct responses upon binding of single and dual targets in the sample mixture and/or artificial saliva. The quantitative data from the developed method are of high clinical significance that can aid in the understanding of clinicopathological advancements in oral cancer at an early stage. This simple yet novel nanosized optical transducer technology can be further converted into miniaturized biochips and can be deployed in clinics as a nanoparticle-based point-of-care diagnostic adjunct.

Metal-organic frameworks for pharmaceutical and biomedical applications

Metal-organic framework (MOF) materials provide unprecedented opportunities for evaluating valuable compounds for various medical applications. MOFs merged with biomolecules, used as novel biomaterials, have become particularly useful in biological environments. Bio-MOFs can be promising materials in the global to avoid utilization above toxicological substances. Bio-MOFs with crystallin and porosity nature offer flexible structure via bio-linker and metal node variation, which improves their wide applicability in medical science.

Nanotechnology: A Promising Approach for Cancer Diagnosis, Therapeutics and Theragnosis

Cancer remains the most devastating disease and the major cause of mortality worldwide. Although early diagnosis and treatment are the key approach in fighting against cancer, the available conventional diagnostic and therapeutic methods are not efficient. Besides, ineffective cancer cell selectivity and toxicity of traditional chemotherapy remain the most significant challenge. These limitations entail the need for the development of both safe and effective cancer diagnosis and treatment options. Due to its robust application, nanotechnology could be a promising method for in-vivo imaging and detection of cancer cells and cancer biomarkers. Nanotechnology could provide a quick, safe, cost-effective, and efficient method for cancer management. It also provides simultaneous diagnosis and treatment of cancer using nano-theragnostic particles that facilitate early detection and selective destruction of cancer cells. Updated and recent discussions are important for selecting the best cancer diagnosis, treatment, and management options, and new insights on designing effective protocols are utmost important. This review discusses the application of nanotechnology in cancer diagnosis, therapeutics, and theragnosis and provides future perspectives in the field.