Petroleum jelly: A comprehensive review of its history, uses, and safety

Petrolatum, also known as petroleum jelly, is a widely used topical agent, with a variety of uses in dermatology. Despite its popularity, many myths surround this ubiquitous dermatologic staple. This review details the history of petrolatum and how it is manufactured as well as how its biologic properties make it a great moisturizer. Additionally, data on its potential for flammability, allergenicity, and comedogenicity are detailed, dispelling misconceptions about petrolatum use around oxygen and as a cause of acne. The uses and benefits of petrolatum in dermatology are wide-ranging-a patch test instrument, a vehicle for medicated ointments, and a wound care essential. Given its ubiquitous presence, it is important for dermatologists to understand the history, safety profile, and myths surrounding this humble skincare staple.

Phosphorus-Based Flame-Retardant Acrylonitrile Butadiene Styrene Copolymer with Enhanced Mechanical Properties by Combining Ultrahigh Molecular Weight Silicone Rubber and Ethylene Methyl Acrylate Copolymer

The present work proposes to investigate the effect of an ultrahigh molecular weight silicone rubber (UHMW-SR) and two ethylene methyl acrylate copolymers (EMA) with different methyl acrylate (MA) content on the mechanical and fire performance of a fireproof acrylonitrile butadiene styrene copolymer (ABS) composite, with an optimum amount of ammonium polyphosphate (APP) and aluminum diethyl phosphinate (AlPi). ABS formulations with a global flame retardant weight content of 20 wt.% (ABS P) were melt-compounded, with and without EMA and UHMW-SR, in a Brabender mixer. During this batch process, ABS P formulations with UHMW-SR and/or EMA registered lower torque values than those of ABS P. By means of scanning electron microscopy (SEM), it was possible to observe that all ABS composites exhibited a homogenous structure without phase separation or particle agglomeration. Slightly improved interfacial interaction between the well-dispersed flame-retardant particles in the presence of EMA and/or UHMW-SR was also noticed. Furthermore, synergies in mechanical properties by adding both EMA and UHMW-SR into ABS P were ascertained. An enhancement of molecular mobility that contributed to the softening of ABS P was observed under dynamic mechanical thermal analysis (DMTA). An improvement of its flexibility, ductility and toughness were also registered under three-point-bending trials, and even more remarkable synergies were noticed in Charpy notched impact strength. Particularly, a 212% increase was achieved when 5 wt.% of EMA with 29 wt.% of MA and 2 wt.% of UHMW-SR in ABS P (ABS E29 S P) were added. Thermogravimetric analysis (TGA) showed that the presence of EMA copolymers in ABS P formulations did not interfere with its thermal decomposition, whereas UHMW-SR presence decreased its thermal stability at the beginning of the decomposition. Although the addition of EMA or UHMW-SR, as well as the combination of both in ABS P increased the pHRR in cone calorimetry, UL 94 V-0 classification was maintained for all flame-retarded ABS composites. In addition, through SEM analysis of cone calorimetry sample residue, a more cohesive surface char layer, with Si-O-C network formation confirmed by Fourier transform infrared (FTIR), was shown in ABS P formulations with UHMW-SR.

Fire-Retardant Flexible Foamed Polyurethane (PU)-Based Composites: Armed and Charmed Ground Tire Rubber (GTR) Particles

Inadequate fire resistance of polymers raises questions about their advanced applications. Flexible polyurethane (PU) foams have myriad applications but inherently suffer from very high flammability. Because of the dependency of the ultimate properties (mechanical and damping performance) of PU foams on their cellular structure, reinforcement of PU with additives brings about further concerns. Though they are highly flammable and known for their environmental consequences, rubber wastes are desired from a circularity standpoint, which can also improve the mechanical properties of PU foams. In this work, melamine cyanurate (MC), melamine polyphosphate (MPP), and ammonium polyphosphate (APP) are used as well-known flame retardants (FRs) to develop highly fire-retardant ground tire rubber (GTR) particles for flexible PU foams. Analysis of the burning behavior of the resulting PU/GTR composites revealed that the armed GTR particles endowed PU with reduced flammability expressed by over 30% increase in limiting oxygen index, 50% drop in peak heat release rate, as well as reduced smoke generation. The Flame Retardancy Index (FRI) was used to classify and label PU/GTR composites such that the amount of GTR was found to be more important than that of FR type. The wide range of FRI (0.94-7.56), taking Poor to Good performance labels, was indicative of the sensitivity of flame retardancy to the hybridization of FR with GTR components, a feature of practicality. The results are promising for fire protection requirements in buildings; however, the flammability reduction was achieved at the expense of mechanical and thermal insulation performance.

Toxic Gas and Smoke Generation and Flammability of Flame-Retardant Plywood

Limited by flammability, wood and wood-based materials face challenges in distinguishing themselves as structural materials or finishing materials. Once burning, they can produce toxic gases detrimental to humans and the environment. Therefore, it is critical to make clear whether fire-retardant wood construction materials are insusceptible to fire and not the sources of toxic gases. This study aimed to evaluate flame-retardant plywood from the aspects of flammability and the toxic gas and smoke generation during combustion. The flame-retardant plywood was manufactured by impregnating a flame-retardant resin in line with International Maritime Organization (IMO) standards. The research results indicate that seven out of the eight kinds of toxic gases listed by the IMO, other than CO, were not detected during the combustion of the flame-retardant plywood. While CO was detected, its quantities under three test conditions are below the corresponding thresholds. Therefore, unlike synthetic resin products, flame-retardant plywood is a promising finishing material that can reduce the damage from toxic gases in the event of a fire. In the smoke generation tests, the mass reduction rate of flame-retardant plywood increased from 13% to 18% and then to 20% as the test condition became more severe. Under the same circumstances, the average maximum specific optical density also followed an upward trend, whose values (75.70, 81.00, and 191.20), however, still met the IMO standard of below 200. This reflects that the flame-retardant plywood is competent as a finishing material. Further, flammability was evaluated, and the critical flux at extinguishment (CFE), total heat release (Qt), and peak heat release rate (Qp) were determined to be 49.5 kW/m2, 0.21 MJ, and 0.66 kW, respectively, which all did not reach the corresponding thresholds given by the IMO. To sum up, flame-retardant plywood has satisfactory flame-retardant performance and meets fire safety standards, showing the potential to be an attractive finishing material for building and construction.

Recent Developments of Nano Flame Retardants for Unsaturated Polyester Resin

For many years, efforts have been made to reduce the flammability of unsaturated polyester resins (UPRs), which are often used in the rail, shipbuilding, and construction industries. Without modification, they often fail to meet fire safety standards. Despite a rich history of flame retardants (FRs) applied to UPRs, researchers seek new solutions that will provide lower flammability and smoke density, as well as attaining a lower environmental impact from the composites. The objective of the study is to highlight the most important recent research on promising nano FRs in order to promote their further development. Mechanisms of action of several groups of nano FRs, such as clay-based, carbon-based, transition metal compounds, layered double hydroxides, polyhedral oligomeric silsesquioxanes, and others, including bio-based, have been studied. Particular emphasis has been laid on nano FRs applied to UPRs, and their influences on thermal stability, flammability, and mechanical properties. Moreover, the environmental impact and toxicity of nano FRs have been discussed. Results have proved that nano FRs applied at low loadings may significantly improve thermal stability, with a simultaneous increase or only a slight decrease in mechanical properties. However, attention on related environmental issues has highlighted the necessity of carefully selecting novel nano FRs.

Effect of Liquid Glass-Modified Lignin Waste on the Flammability Properties of Biopolyurethane Foam Composites

Water-blown biopolyurethane (bioPUR) foams are flammable and emit toxic gases during combustion. Herein, a novel approach suggested by the current study is to use different amounts of lignin waste (LigW), which increases the thermal stability and delays the flame spread and sodium silicate (LG), which has foaming ability at high temperatures and acts as a protective layer during a fire. However, there have been no studies carried out to investigate the synergy between these two materials. Therefore, two different ratios, namely 1/1 and 1/2 of LigW/LG, were used to prepare bioPUR foam composites. The obtained bioPUR foam composites with a 1/2 ratio of LigW/LG exhibited inhibition of flame propagation during the ignitability test by 7 s, increased thermal stability at higher temperatures by 40 °C, reduced total smoke production by 17%, reduced carbon monoxide release by 22%, and increased compressive strength by a maximum of 123% and 36% and tensile strength by a maximum of 49% and 30% at 100 °C and 200 °C, respectively, compared to bioPUR foam composites with unmodified LigW. Additionally, thanks to the sufficient compatibility between the polymeric matrix and LigW/LG particles, bioPUR foam composites were characterised by unchanged or even improved physical and mechanical properties, as well as increased glass transition temperature by 16% compared to bioPUR foam composites with unmodified LigW particles, making them suitable for application as a thermal insulating layer in building envelopes.

Interpreting shoot flammability experiments: from fire behaviour to plant evolution

This article is a Commentary on Cui et al. (2023), 240: 105–113.

Effects of Additives on the Mechanical and Fire Resistance Properties of Pultruded Composites

Under high temperatures, fiber-reinforced polymers are destroyed, releasing heat, smoke, and harmful volatile substances. Therefore, composite structural elements must have sufficient fire resistance to meet the requirements established by building codes and regulations. Fire resistance of composite materials can be improved by using mineral fillers as flame-retardant additives in resin compositions. This article analyzes the effect of fire-retardant additives on mechanical properties and fire behavior of pultruded composite profiles. Five resin mixtures based on vinyl ester epoxy and on brominated vinyl ester epoxy modified with alumina trihydrate and triphenyl phosphate were prepared for pultrusion of strip profiles of 150 mm × 3.5 mm. A series of tests have been conducted to determine mechanical properties (tensile, flexural, compression, and interlaminar shear) and fire behavior (ignitability, flammability, combustibility, toxicity, smoke generation, and flame spread) of composites. It was found that additives impair mechanical properties of materials, as they the take place of reinforcing fibers and reduce the volume fraction of reinforcing fibers. Profiles based on non-brominated vinyl ester epoxy have higher tensile, compressive, and flexural properties than those based on brominated vinyl ester epoxy by 7%, 30%, and 36%, respectively. Profiles based on non-brominated epoxy resin emit less smoke compared to those based on brominated epoxy resin. Brominated epoxy-based profiles have a flue gas temperature which is seven times lower compared to those based on the non-brominated epoxy. Mineral fillers retard the spread of flame over the composite material surface by as much as 4 times and reduce smoke generation by 30%.

Development of High Strength Particleboards from Hemp Shives and Corn Starch

In the current study, high-strength boards for the construction industry were developed from renewable natural resources, fibrous hemp shives, and corn starch. During the research, the influence of the composition of the mixture, the processing of raw materials, and technological parameters on the operational properties of the board were evaluated. The influence of the binding material and the water content on the properties of the molded boards was evaluated. It was established that the rational amount of starch is 15% of the mass of the shives, and the amount of water is 10%. It has been established that with the proper selection of the forming parameters of the board, it is possible to avoid internal disintegration of the structure due to the water vapor pressure, increase the bending strength, and ensure uniform sintering of the board throughout the entire volume. It was found that additional processing of hemp shives can increase bending strength by more than 40%. Furthermore, during the processing of shives by chemical means, soluble substances are washed out, which reduces the density and thermal conductivity of the shives. Selection of a rational level of compression allowed us to increase the bending strength of the boards by 40%. The assessment of all factors made it possible to obtain boards with a bending strength of 40 MPa. The additives used made it possible to reduce the water absorption of the boards up to 16 times and obtain non-flammable boards. The thermal conductivity of the resulting boards varied from 0.07 to 0.095 W/(m·K). The analysis of macrostructure and microstructure allowed us to evaluate the process of the formation of bonds between hemp shives.

QSPR models to predict the physical hazards of mixtures: a state of art

Physical hazards of chemical mixtures, associated for example with their fire or explosion risks, are generally characterized using experimental tools. These tests can be expensive, complex, long to perform and even dangerous for operators. Therefore, for several years and especially with the implementation of the REACH regulation, predictive methods like quantitative structure-property relationships have been encouraged as alternatives tests to determine (eco)toxicological but also physical hazards of chemical substances. Initially, these approaches were intended for pure products, by considering a molecular similarity principle. However, additional to those for pure products, QSPR models for mixtures recently appeared and represent an increasing field of research. This study proposes a state of the art of existing QSPR models specifically dedicated to the prediction of the physical hazards of mixtures. Identified models have been analysed on the key elements of model development (experimental data and fields of application, descriptors used, development and validation methods). It draws up an overview of the potential and limitations of current models as well as areas of progress towards enlarged deployment as a complement to experimental characterizations, for example in the search for safer substances (according to safety-by-design concepts).

The Effect of Flame-Retardant Additives DDM-DOPO and Graphene on Flame Propagation over Glass-Fiber-Reinforced Epoxy Resin under the Influence of External Thermal Radiation

The flammability of various materials used in industry is an important issue in the modern world. This work is devoted to the study of the effect of flame retardants, graphene and DDM-DOPO (9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide-4,4'-diamino-diphenyl methane), on the flammability of glass-fiber-reinforced epoxy resin (GFRER). Samples were made without additives and with additives of fire retardants: graphene and DDM-DOPO in various proportions. To study the flammability of the samples, standard flammability tests were carried out, such as thermogravimetric analysis, the limiting oxygen index (LOI) test, and cone calorimetry. In addition, in order to test the effectiveness of fire retardants under real fire conditions, for the first time, the thermal structure of downward flame propagation over GFRER composites was measured using thin thermocouples. For the first time, the measured thermal structure of the flame was compared with the results of numerical simulations of flame propagation over GFRER.

Quality of Fine Yarns from Modacrylic/Polyacrylate/Lyocell Blends Intended for Affordable Flame-Resistant Underwear

Flammability testing of undergarments is a topic that is often overlooked and rarely on the list of textiles to be tested for fire safety. However, it is particularly important for professionals exposed to fire risk to investigate the flammability of underwear as its direct contact with the skin can be critical to the extent and degree of skin burns. This research focuses on the suitability of affordable blends of 55 wt.% modacrylic, 15 wt.% polyacrylate, and 30 wt.% lyocell fibres that have the potential to be used for flame-resistant underwear. The influence of modacrylic fibre linear density (standard and microfibres), ring spinning processes (conventional, Sirospun, and compact), and knitted structure (plain, 2:1 rib, 2:1 tuck rib, single pique, and triple tuck) on their properties required for thermal comfort in high-temperature environments was investigated. Scanning electron and optical microscopy, FT-IR spectroscopy, mechanical testing, moisture regain, water sorption, wettability, absorption, DSC, TGA, and flammability were tested to assess the desired suitability. The wetting time (5-14.6 s) and water absorption time (4.6-21.4 s) of the knitted fabrics have shown excellent ability to transport and absorb water compared to the knitted fabrics created from a conventional blend of 65% modacrylic and 35% cotton fibres. The afterflame and afterglow times of less than 2 s met the criteria for non-flammability of the knitted fabrics according to the limited flame spread test method. The results show that the investigated blends have the potential to be used for affordable flame-retardant and thermally comfortable knitted fabrics for underwear.

Fire Retardant Phase Change Materials-Recent Developments and Future Perspectives

The accumulation of thermal energy in the form of latent heat of phase transition using phase change materials (PCMs) is one of the most attractive and studied research areas with huge application potential in both passive and active technical systems. The largest and most important group of PCMs for low-temperature applications are organic PCMs, mainly paraffins, fatty acids, fatty alcohols, and polymers. One of the major disadvantages of organic PCMs is their flammability. In many applications such as building, battery thermal management, and protective insulations, the crucial task is to reduce the fire risk of flammable PCMs. In the last decade, numerous research works have been performed to reduce the flammability of organic PCMs, without losing their thermal performance. In this review, the main groups of flame retardants, PCMs flame retardation methods as well as examples of flame-retarded PCMs and their application areas were described.

Polysiloxanes and Silanes with Various Functional Groups-New Compounds for Flax Fibers' Modification

There is an increasing desire to use natural products that will be both effective and biodegradable. The aim of this work is to investigate the effect of modifying flax fibers with silicon compounds (silanes and polysiloxanes), as well as examining the effect of the mercerization process on their properties. Two types of polysiloxanes have been synthesized and confirmed by infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy (NMR). Scanning electron microscopy (SEM), FTIR, thermogravimetry analysis (TGA) and pyrolysis-combustion flow calorimetry (PCFC) tests of the fibers were performed. On the SEM pictures, flax fibers purified and covered with silanes were visible after treatment. FTIR analysis showed stable bonds between the fibers and the silicon compounds. Promising results of thermal stability were obtained. It was also found that modification had a positive effect on the flammability. The conducted research showed that the use of such modifications, in the context of using flax fibers for composites, can yield very good results.

The Components' Roles in Thermal Stability and Flammability of Cork Powder

In this study, an analysis of the influence of extractives, suberin and lignocellulosic components on the pyrolysis decomposition and fire reaction mechanisms of a cork oak powder from Quercus suber L. is presented. The summative chemical composition of cork powder was determined. Suberin was the main component at 40% of the total weight, followed by 24% of lignin, 19% of polysaccharides and 14% of extractives. The absorbance peaks of cork and its individual components were further analyzed by means of ATR-FTIR spectrometry. Thermogravimetric analysis (TGA) showed that the removal of extractives from cork slightly increased the thermal stability between 200 °C and 300 °C and led to the formation of a more thermally stable residue at the end of the cork decomposition. Moreover, by removing suberin, a shift of the onset decomposition temperature to a lower temperature was noticed, indicating that suberin plays a major role in enhancing the thermal stability of cork. Furthermore, non-polar extractives showed the highest flammability with a peak of heat release rate (pHRR) of 365 W/g analyzed by means of micro-scale combustion calorimetry (MCC). Above 300 °C, the heat release rate (HRR) of suberin was lower than that of polysaccharides or lignin. However, below that temperature it released more flammable gases with a pHRR of 180 W/g, without significant charring ability, contrary to the mentioned components that showed lower HRR due to their prominent condensed mode of action that slowed down the mass and heat transfer processes during the combustion process.

Flammability of Polymer Compositions Filled with Wheat Bran

The article presents the results of flammability tests on polymer compositions with wheat bran (WB) as the applied filler, and polyethylene (PE) or poly(butylene succinate) (PBS) as the matrix material. Tests were conducted using samples of compositions containing 10, 30 and 50%wt wheat bran. The test samples were manufactured by injection moulding from compositions previously produced by extrusion pelleting. For comparative purposes, samples made only of the plastics used for the composition matrix were also examined. Flammability tests were carried out in accordance with the recommendations of EN 60695-11-10 Part 11-10 with horizontal and vertical positioning of the sample, using a universal flammability-test-stand. During the flammability tests, changes in the temperature field in the area of the burning sample were also recorded, using a thermal imaging camera. Sample residues after flammability tests were also examined with infrared spectroscopy (FTIR) to assess their thermal destruction. The results of the study showed a significant increase in flammability with bran content for both PE and PBS matrix compositions. Clear differences were also found in the combustion behaviour of the matrix materials alone. Both the burning rate and maximum flame temperature were lower in favour of PBS. PBS compositions with wheat bran also showed lower flammability, compared with their PE matrix counterparts.

Flexible Polyurethane Foams Reinforced by Functionalized Polyhedral Oligomeric Silsesquioxanes: Structural Characteristics and Evaluation of Thermal/Flammability Properties

In this work, we report on flexible toluene diisocyanate (TDI)-based polyurethane foams (FPUFs) chemically modified by POSS moieties, i.e., octa (3-hydroxy-3-methylbutyldimethylsiloxy) POSS (OCTA-POSS) and 1,2-propanediolizo-butyl POSS (PHI-POSS). The influence of silsesquioxane on the PU foaming process, structure, morphology, physicochemical, and mechanical properties, as well as flammability, was examined. FT-IR analysis provided evidence for the chemical incorporation of the nanofiller into the foam structure. It was found that the addition of POSS increases the apparent density of the foam and its compressive strength. The XRD and SEM-EDS techniques showed the uniform distribution of POSS in the FPUF with agglomeration depending on the kind and content of the introduced POSS moieties. The analysis of the thermogravimetric and microcalorimetry data revealed an improved resistance to the burning of FPUFs containing reactive POSS, as evidenced by the reduced rate of heat release (HRR). Importantly, the mechanical properties tests showed that the incorporation of silsesquioxane nanoparticles into the polyurethane structure via covalent bonds strengthens the foam integrity.

Fire Resistance Evaluation of New Wooden Composites Containing Waste Rubber from Automobiles

Particleboards containing waste rubber (tires and mixtures of isolators and carpets) filler were evaluated from the point of view of its flammability. The assessment of the utilization of these composites in the construction industry was analyzed through the determination of their spontaneous ignition temperatures, mass burning rate and calorific value. Based on the results of spontaneous ignition temperatures, similar values between particleboards and particleboards containing 10%, 15% and 20% of waste tires were obtained. The average time was from 298 s to 309 s and the average temperature was from 428.1 °C to 431.7 °C. For the mass burning rate, there were similar results between particleboards and particleboards containing 10% of waste tires and waste rubber. The time to initiation was 34 s and the time to reaching a maximal burning rate was from 66 s to 68 s. The calorimetry results showed similar properties for the calorimetric value and ash content in particleboards and particleboards containing 10% of waste tires and waste rubber. The calorific value was from 18.4 MJ·kg^-1 to 19.7 MJ·kg^-1 and the ash content from 0.5% to 2.9%.

The Use of Iron(II,III) Oxide (Fe3O4) as a Cross-Linking Agent for Unfilled and Filled Chlorosulfonated Polyethylene (CSM) and Study of the Vulcanizates Properties

This paper discusses the cross-linking behaviors, mechanical and dynamical properties, and flammability of elastomeric composites containing unconventionally cured chlorosulfonated polyethylene (CSM). The purpose of this work was to verify the CSM ability to cross-link with iron(II,III) oxide (Fe₃O₄) and to produce flame retardant materials. During the first series of tests, three types of CSM were used, differing in the content of bound chlorine (29-43%). The results showed that the CSM with 43% bound chlorine (Hypalon 30, CSM43) was the most advantageous type of chlorosulfonated polyethylene in terms of its properties. It exhibited a short vulcanization time, a high degree of cross-linking, and very good mechanical properties. In the next stage, the CSM composites with various fillers (talc, arsil, kaolin, chalcedonite, or carbon black) were prepared, because filled rubber materials are of the greatest practical importance. The cross-linking kinetics, equilibrium swelling, mechanical and dynamic properties as well as flammability were studied. It was found that the addition of fillers led to a decrease in the degree of cross-linking, an increase in the vulcanization time (in the case of talc, arsil, or kaolin), an increase in the overall mechanical strength (in the case of carbon black, arsil or talc). All filled vulcanizates proved to be non-flammable, as the specific oxygen index value exceeded 37.5%.

Thermal Insulating Rigid Polyurethane Foams with Bio-Polyol from Rapeseed Oil Modified by Phosphorus Additive and Reactive Flame Retardants

In this article, rigid polyurethane foams obtained with the addition of a bio-polyol from rapeseed oil, were modified with the dimethyl propane phosphonate as additive flame retardant and two reactive flame retardants diethyl (hydroxymethyl)phosphonate and diethyl bis-(2-hydroxyethyl)-aminomethylphosphonate. The influence of used flame retardants on the foaming process and characteristic processing times of tested polyurethane systems were determined. The obtained foams were tested in terms of cell structure, physical and mechanical properties, as well as flammability. Modified foams had worse mechanical and thermal insulation properties, caused by lower cellular density and higher anisotropy coefficient in the cross-section parallel to the foam rise direction, compared to unmodified foam. However, the thermal conductivity of all tested foam materials was lower than 25.82 mW/m∙K. The applied modifiers effectively reduced the flammability of rigid polyurethane foams, among others, increasing the oxygen index above 21.4 vol.%, reducing the total heat released by about 41-51% and the rate of heat release by about 2-52%. A correlation between the limiting oxygen index values and both total heat released parameters from the pyrolysis combustion flow calorimetry and cone calorimetry was observed. The correlation was also visible between the value of the heat release capacity (HRC) parameter obtained from the pyrolysis combustion flow calorimetry and the maximum average rate of heat emission (MARHE) from the cone calorimeter test.

Fully Coupled Three-Dimensional Simulation of Downward Flame Spread over Combustible Material

Three-dimensional simulations of laminar flame propagating downwards the vertical surface of a rigid polyurethane slab heated by a radiative panel are presented and compared with the measurement data. The gas-phase model (ANSYS Fluent) allows for finite-rate volatile oxidation, soot formation and oxidation, emission, transfer, and absorption of thermal radiation. The solid-phase model Pyropolis considers heat transfer across the material layer and generation of combustible volatiles in thermal decomposition of the material. Kinetic model of material decomposition is derived to obey the microscale combustion calorimetry data for different heating rates. Transient behavior of propagating flame and pyrolysis zone, as well as spatial distributions of heat flux components, temperature, and mass burning rates over the specimen surface are examined. Variation of the thermal properties of the material during its thermal decomposition, as well as the specimen surface emissivity and reradiation are shown to be the important issues strongly affecting model predictions. Two distinct modes of counterflow flame spread, thermal and kinetic, are identified. In the thermal mode corresponding to fast chemistry in the gaseous flame, the flame propagation velocity is governed by the heating rate of the combustible material ahead of the flame front. Alternatively, in the kinetic mode, it is limited by the burning velocity of the volatile-air mixture forming ahead of the flame front. Simulation results are favorably compared with the measured propagation velocity.

Methods of Preparation and Performance Evaluation of ABS/Mineral Microsphere Composites Produced through FDM and Compression Molding

The use of amorphous microspheres as filler in composites is promising due to their light weight, low cost, incombustibility, and the ability to alter relevant properties of the final composite. Contrary to glass spheres, perlite microspheres are much cheaper and can be tailor-made to facilitate purpose-oriented alteration of the final composite. We report the use of perlite microspheres for the preparation of: (1) composites, through a compression molding (hot pressing) technique; and (2) composite filaments, in a single screw extruder, as well as their use for sample printing through Fused Deposition Modeling (FDM). Proper characterization of the produced composites allows for their evaluation in terms of physical, thermal, and mechanical properties and with regards to the manufacturing technique, the filler fraction, and size. Composite samples of acceptable quality in terms of filler survival and dispersion as well as mechanical properties were produced through compression molding using fine expanded perlite microspheres (<90 μm) up to an infill ratio of 40 vol.%. Fine fillers (<90 μm) performed well in FDM, allowing printing of composite dogbone samples with a higher Young’s modulus and elongation and similar ultimate tensile strength compared to benchmark, up to an infill ratio of 20 vol.%. Composite samples present a slightly lower burning rate compared to those produced solely by ABS. Perlite microspheres present good workability in both applications, possessing satisfactory performance as filler in the composites, and can thus be assumed a promising multifunctional filler for various thermoplastics considering their low price, environmental impact, and fire rating.

Thermal Stability, Dynamic Mechanical Analysis and Flammability Properties of Woven Kenaf/Polyester-Reinforced Polylactic Acid Hybrid Laminated Composites

This paper presents the thermal and flammability properties of woven kenaf/polyester-reinforced polylactic acid hybrid laminated composites. The effects of the fiber content and stacking sequences of hybrid composites were examined. The hybrid composites were fabricated using the hot press method. Thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, and flammability properties of woven kenaf/polyester-reinforced polylactic hybrid composites were reported. The thermal results have demonstrated the effect of the hybridization of the composites on the thermal stability and viscoelastic properties of the laminates. The work also measured the burning rate of the hybrid composites during the flammability test. The S7 sample that consisted of all woven kenaf layers in composite recorded the highest char residue of 10%, and the S8 sample displayed the highest decomposition temperature among all samples. However, as for hybrid composites, the S5 sample shows the optimum result with a high char yield and exhibited the lowest burning rate at 29 mm/min. The S5 sample also shows the optimum viscoelastic properties such as storage and loss modulus among hybrid composites.

Non-Flammable Sodium Asymmetric Imide Salt-Based Deep Eutectic Solvent for Supercapacitor Applications

This study reports two deep eutectic solvents (DESs) based on alkaline imide salts with asymmetric anions as functional electrolytes for supercapacitor (SC) application. The eutectic mixture of sodium (fluorosulfonyl) (trifluoromethanesulfonyl) imide (NaFTFSI) or sodium cyano-trifluoromethanesulfonyl imide (NaTFSICN) with ethylene carbonate (EC) delivers a non-flammable and stable liquid. The eutectic diagrams of the electrolytes directed to an optimal composition ( w salt = 0.25), hinging to that of conventional carbonate-based electrolytes, i.e., 1 mol L -1 . The volumetric properties of the DESs revealed a "stacking" effect, reflecting a strong coordination bond between the imide and EC anions without solvating the Na + cations. The DES transport properties (i.e., viscosity, conductivity, and ionicity) and temperature variations designate a high organization, similar to ionic liquids. The DESs, when coupled with activated carbon electrodes in a two-electrode symmetric configuration, yield specific capacities of 150 F g -1 at a normalized current density of 0.5 A g -1 (and 120 F g -1 at 2 A g -1 ). The SC maintained 80% of its initial capacity beyond 100 h of floating at an operating voltage of 2.4 V and showed a 150 mV per hour potential loss under self-discharge. The devised eutectic mixtures offer a promising new pathway for simple, safe, and effective electrolytes for SC applications.

Savanna fire regimes depend on grass trait diversity

Grasses fuel most fires on Earth and strongly influence local fire behaviour through traits that determine how flammable they are. Therefore, grass communities that differ in their species and trait compositions give rise to significant spatial variation in savanna fire regimes across the world, which cannot be otherwise explained. Likewise, fire regimes are continuously modified by alterations to savanna grass community traits, through species introductions and climatic changes. However, current representation of grassy fuels in global fire models misses important variation and therefore limits predictive power. The inclusion of grass trait diversity in models, using remotely sensed trait proxies, for example, will greatly improve our ability to understand and project savanna fires and their roles in the Earth system.

Polyester and Epoxy Resins with Increased Thermal Conductivity and Reduced Surface Resistivity for Applications in Explosion-Proof Enclosures of Electrical Devices

Composite materials are still finding new applications that require the modification of various properties and are characterized by the summary impact on selected operational features. Due to the operating conditions of electrical equipment enclosures in potentially explosive atmospheres, the surface resistivity ensuring anti-electrostatic properties, i.e., below 10⁹ Ω and resistance to the flame while maintaining appropriate operational enclosure properties is very important. It is also crucial to dissipate heat while reducing weight. Currently metal or cast-iron enclosures are used for various types of electrical devices. As part of the work, a material that can be used for a composite matrix for the enclosure was developed. The study aimed to assess the influence of selected fillers and chemical modifications on the thermal conductivity coefficient, resistivity, and strength properties of matrix materials for the production of electrical device enclosures used in the mining industry. Selected resins were modified with graphite, copper, and carbon black. Tests were carried out on the coefficient of thermal conductivity, surface resistivity, flammability, and flexural strength. At the final stage of the work, a multi-criteria analysis was carried out, which allowed the selection of a composite that meets the assumed characteristics to the highest degree. It is a vinyl ester composite modified with 15 wt.% MG394 and 5 wt.% MG1596 graphite (W2). The thermal conductivity of composite W2 is 5.64 W/mK, the surface resistivity is 5.2 × 10³ Ω, the flexural strength is 50.61 MPa, and the flammability class is V0.

Bio-Based Rigid Polyurethane Foams Modified with Phosphorus Flame Retardants

Rigid polyurethane foams (RPURF) containing a bio-polyol from rapeseed oil and different phosphorus-based flame retardants were obtained. Triethyl phosphate (TEP), dimethyl propane phosphonate (DMPP) and cyclic phosphonates Addforce CT 901 (20 parts per hundred polyol by weight) were used in the synthesis of RPURF. The influence of used flame retardants on foaming process, cell structure, and physical-mechanical properties as well as flammability of RPURF were examined. The addition of flame retardants influenced the parameters of the cellular structure and decreased compressive strength. All obtained foam materials had a low thermal conductivity coefficient, which allows them to be used as thermal insulation. The research results of bio-based RPURF were compared with foams obtained without bio-polyol. All modified materials had an oxygen index above 21 vol%; therefore, they can be classified as self-extinguishing materials. The analysis of parameters obtained after the cone calorimeter test showed that the modified RPURF have a lower tendency to fire development compared to the reference foams, which was particularly noticeable for the materials with the addition of DMPP.

The Flame-Retardant Mechanisms and Preparation of Polymer Composites and Their Potential Application in Construction Engineering

Against the background of people's increasing awareness of personal safety and property safety, the flame retardancy (FR) of materials has increasingly become the focus of attention in the field of construction engineering. A variety of materials have been developed in research and production in this field. Polymers have many advantages, such as their light weight, low water absorption, high flexibility, good chemical corrosion resistance, high specific strength, high specific modulus and low thermal conductivity, and are often applied to the field of construction engineering. However, the FR of unmodified polymer is not ideal, and new methods to make it more flame retardant are needed to enhance the FR. This article primarily introduces the flame-retardant mechanism of fire retardancy. It summarizes the preparation of polymer flame-retardant materials by adding different flame-retardant agents, and the application and research progress related to polymer flame-retardant materials in construction engineering.

Modification of Glass/Polyester Laminates with Flame Retardants

This paper presents a review of flame retardants used for glass/polyester laminates. It concerns flame retardants withdrawn from use such as compounds containing halogen atoms and flame retardants currently used in the industry, such as inorganic hydroxides, phosphorus and nitrogen-containing compounds, antimony, and boron compounds, as well as tin–zinc compounds. Attention is also drawn to the use of nanoclays and the production of nanocomposites, intumescent flame retardant systems, and mats, as well as polyhedral oligomeric silsesquioxanes. The paper discusses the action mechanism of particular flame retardants and presents their advantages and disadvantages.

Effect of Cyrtostachys renda Fiber Loading on the Mechanical, Morphology, and Flammability Properties of Multi-Walled Carbon Nanotubes/Phenolic Bio-Composites

This research focuses on evaluating the effect of Cyrtostachys renda (CR) fiber and the impact of adding multi-walled carbon nanotubes (MWCNT) on the morphological, physical, mechanical, and flammability properties of phenolic composites. MWCNT were supplemented with phenolic resin through a dry dispersion ball milling method. Composites were fabricated by incorporating CR fiber in 0.5 wt.% MWCNT-phenolic matrix by hot pressing. Nevertheless, the void content, higher water absorption, and thickness swelling increased with fiber loading to the MWCNT/phenolic composites. The presence of MWCNT in phenolic enhanced the tensile, flexural, and impact strength by as much as 18%, 8%, and 8%, respectively, compared to pristine phenolic. The addition of CR fiber, however, strengthened MWCNT-phenolic composites, improving the tensile, flexural, and impact strength by as much as 16%, 16%, and 266%, respectively, for 50 wt.% loading of CR fiber. The CR fiber may adhere properly to the matrix, indicating that there is a strong interface between fiber and MWCNT-phenolic resin. UL-94 horizontal and limiting oxygen index (LOI) results indicated that all composite materials are in the category of self-extinguishing. Based on the technique for order preference by similarity to the ideal solution (TOPSIS) technique, 50 wt.% CR fiber-reinforced MWCNT-phenolic composite was chosen as the optimal composite for mechanical and flammability properties. This bio-based eco-friendly composite has the potential to be used as an aircraft interior component.

The Use of Copper Oxides as Cross-Linking Substances for Chloroprene Rubber and Study of the Vulcanizates Properties. Part II. The Effect of Filler Type on the Properties of CR Products

The properties of rubber materials are dependent on the characteristics of the elastomer matrix, the filler type, the cross-linking agent, the number of ingredients, and their interactions. In the previous article, we showed that chloroprene rubber can be efficiently cross-linked with copper(I) oxide or copper(II) oxide. During the processing of rubber compounds, the incorporation of a filler and a curing substance are two substantial parameters, such as the homogeneity of mixing and cross-linking that significantly affect the properties of the vulcanizates. Therefore, this work aimed to evaluate the curing characteristics, mechanical and dynamical properties, morphology, and flammability of the composites containing chloroprene rubber cross-linked with Cu₂O or CuO and filled with different fillers (silica, carbon black, montmorillonite, kaolin, chalk). It was found that the type of filler and curing agent had a significant impact on the degree of cross-linking of the chloroprene rubber and the properties of its vulcanizates. The degree and speed of the cross-linking of filled CR were higher when the CR was cured with copper(II) oxide. Among the fillers used, the presence of carbon black or silica ensured the highest degree of CR cross-linking and the most useful properties. The flammability tests indicated that all produced vulcanizates were characterized by a high oxygen index, which allows them to be classified as non-flammable materials.

Clays as Inhibitors of Polyurethane Foams' Flammability

Polyurethanes are a very important group of polymers with an extensive range of applications in different branches of industry. In the form of foams, they are mainly used in bedding, furniture, building, construction, and automotive sectors. Due to human safety reasons, these applications require an appropriate level of flame retardance, often required by various law regulations. Nevertheless, without the proper modifications, polyurethane foams are easily ignitable, highly flammable, and generate an enormous amount of smoke during combustion. Therefore, proper modifications or additives should be introduced to reduce their flammability. Except for the most popular phosphorus-, halogen-, or nitrogen-containing flame retardants, promising results were noted for the application of clays. Due to their small particle size and flake-like shape, they induce a "labyrinth effect" inside the foam, resulting in the delay of decomposition onset, reduction of smoke generation, and inhibition of heat, gas, and mass transfer. Moreover, clays can be easily modified with different organic compounds or used along with conventional flame retardants. Such an approach may often result in the synergy effect, which provides the exceptional reduction of foams' flammability. This paper summarizes the literature reports related to the applications of clays in the reduction of polyurethane foams' flammability, either by their incorporation as a nanofiller or by preparation of coatings.

Effects of Water and Chemical Solutions Ageing on the Physical, Mechanical, Thermal and Flammability Properties of Natural Fibre-Reinforced Thermoplastic Composites

Biocomposites comprising a combination of natural fibres and bio-based polymers are good alternatives to those produced from synthetic components in terms of sustainability and environmental issues. However, it is well known that water or aqueous chemical solutions affect natural polymers/fibres more than the respective synthetic components. In this study the effects of water, salt water, acidic and alkali solutions ageing on water uptake, mechanical properties and flammability of natural fibre-reinforced polypropylene (PP) and poly(lactic acid) (PLA) composites were compared. Jute, sisal and wool fibre- reinforced PP and PLA composites were prepared using a novel, patented nonwoven technology followed by the hot press method. The prepared composites were aged in water and chemical solutions for up to 3 week periods. Water absorption, flexural properties and the thermal and flammability performances of the composites were investigated before and after ageing each process. The effect of post-ageing drying on the retention of mechanical and flammability properties has also been studied. A linear relationship between irreversible flexural modulus reduction and water adsorption/desorption was observed. The aqueous chemical solutions caused further but minor effects in terms of moisture sorption and flexural modulus changes. PLA composites were affected more than the respective PP composites, because of their hydrolytic sensitivity. From thermal analytical results, these changes in PP composites could be attributed to ageing effects on fibres, whereas in PLA composite changes related to both those of fibres present and of the polymer. Ageing however, had no adverse effect on the flammability of the composites.

Leaf Thermal and Chemical Properties as Natural Drivers of Plant Flammability of Native and Exotic Tree Species of the Valparaíso Region, Chile

Forest fires are one of the main environmental threats in Chile. Fires in this Mediterranean climate region frequently affect native forests and exotic plantations, including in several cases urban and rural settlements. Considering the scarcity of information regarding the fire response dynamics of tree species that are frequently affected by fires, this study aims to establish a flammability classification according to the evolution of the fire initiation risk presented by the most affected forest species in the Valparaíso region. Three exotic species, Eucalyptus globulus, Pinus radiata, and Acacia dealbata, and two native species, Cryptocarya alba and Quillaja saponaria, were studied. Flammability assays indicate that E. globulus, A. dealbata, and C. alba are extremely flammable, whereas P. radiata and Q. saponaria are flammable. Furthermore, E. globulus and A. dealbata have the highest heating values while Q. saponaria has the lowest values. The extreme flammability of E. globulus, A. dealbata, and C. alba indicates a high susceptibility to ignite. Furthermore, the high heat of combustion of E. globulus and A. dealbata can be associated with a high energy release, increasing the risk of fires spreading. In contrast, Q. saponaria has the lowest predisposition to ignite and capacity to release heat. Accordingly, this work shows that all studied tree species contain organic metabolites that are potentially flammable (sesquiterpenes, aliphatic hydrocarbons, alcohol esters, ketones, diterpenes, and triterpenes) and can be considered as drivers of flammability in vegetation. Finally, these preliminary results will aid in the construction of more resilient landscapes in the near future.

Effectiveness of Silanization and Plasma Treatment in the Improvement of Selected Flax Fibers' Properties

The study investigated the effectiveness of the combination of chemical and physical methods of natural fibers’ modification. The long flax fibers were subjected to various types of modification. These were silanization, plasma modification and a combination of these methods. For the silanization process, two types of silanes were used: amino- and vinylsilane. The application of structurally different compounds allowed us to acquire knowledge about the effect of the modifier structure on its properties. Various properties of flax fibers were investigated, comparing the results before and after different modification processes. The flammability of prepared samples were tested by pyrolysis combustion flow calorimeter (PCFC). In the effect of the natural fibers’ modifications, flammability was reduced even by 30%. The thermal stability of modified fibers increased. The FTIR tests of the gases released during thermal degradation of the tested fibers allowed us to determine the important compounds and prove a lower degree of flax-fiber decomposition after modification. Flax fibers were also tested to evaluate their physical properties (linear mass, average diameter, aspect ratio and hygroscopicity). Changes in surface morphology were observed by scanning electron microscope (SEM). The properties of natural fibers improved significantly, thus contributing to an increase in their suitability for the use in composites.

Performance and Failure Mechanism of Fire Barriers in Full-Scale Chair Mock-ups

The effectiveness and the failure mechanism of fire barriers in residential upholstered furniture were investigated by full-scale flaming tests on upholstered chair mock-ups. Six commercial fire barriers were tested in this study. Fire barriers were screened for (1) the presence of elements that are typically used in fire retardants and, (2) the presence of targeted fire retardants. For each fire barrier, triplicate flammability tests were run on chair mock-ups where polyurethane foam and polyester fiber fill were used as the padding materials, and each chair component was fully wrapped with the fire barrier of choice and a polypropylene cover fabric. The ignition source was an 18 kW square propane burner, impinging on the top surface of the seat cushion for 80 s. Results showed all six fire barriers reduced the peak heat release rate (as much as ≈ 64 %) and delayed its occurrence (up to ≈ 19 min) as compared to the control chair mock-ups. The heat release rate remained at a relatively low plateau level until liquid products (generated by either melting or pyrolysis of the padding material) percolated through the fire barrier at the bottom of the seat cushion and ignited, while the fire barrier was presumably intact. The flaming liquid products dripped and quickly formed a pool fire under the chair and the peak heat release rate occurred shortly thereafter. Ultimately, the ignition of the percolating liquid products at the bottom of the seat cushion was identified as the mechanism triggering the failure of the fire barrier.

α-Aminophosphonate Derivatives for Enhanced Flame Retardant Properties in Epoxy Resin

This work demonstrates the introduction of various α-aminophosphonate compounds to an epoxy resin system, thereby improving flame retardance properties. The α-aminophosphonate scaffold allows for covalent incorporation (via the secondary amine) of the compounds into the polymer network. This work explores the synergistic effect of phosphorus and halogens (such as fluorine) to improve flame retardancy. The compounds were all prepared and isolated in analytical purity and in good yield (95%). Epoxy samples were prepared, individually incorporating each compound. Thermogravimetric analysis showed an increased char yield, indicating an improved thermal resistance (with respect to the control sample). Limiting oxygen index for the control polymer was 28.0% ± 0.31% and it increased to 34.6% ± 0.33% for the fluorinated derivative.

Insulating Composites Made from Sulfur, Canola Oil, and Wool*

An insulating composite was made from the sustainable building blocks wool, sulfur, and canola oil. In the first stage of the synthesis, inverse vulcanization was used to make a polysulfide polymer from the canola oil triglyceride and sulfur. This polymerization benefits from complete atom economy. In the second stage, the powdered polymer was mixed with wool, coating the fibers through electrostatic attraction. The polymer and wool mixture were then compressed with mild heating to provoke S-S metathesis in the polymer, which locks the wool in the polymer matrix. The wool fibers imparted tensile strength, insulating properties, and reduced the flammability of the composite. All building blocks are sustainable or derived from waste and the composite is a promising lead on next-generation insulation for energy conservation.

Hardly Flammable Polyurethane Foams with 1,3-Pyrimidine Ring and Boron Atoms

This work presents the results of research related to the determination of application possibilities of new oligoetherols with 1,3-pyrimidine rings and boron atoms in rigid polyurethane foam production. Oligoetherols were obtained from 1,3-bis(2-hydroxyethyl)uracil, boric acid, and ethylene carbonate. Their structure was determined by instrumental methods (IR, 1H-NMR and MALDI-ToF spectra) and the physicochemical and thermal properties were examined. Obtained oligoetherols were used for synthesis of polyurethane foams. Some properties of the foams, such as apparent density, water uptake, dimensions stability, thermal stability, compression strength, thermal conductivity, oxygen index, and horizontal burning were investigated. The introduction of boron atoms into the foam structure reduced their flammability, but unfortunately it had a negative effect on the water absorption of the obtained materials-the water absorption was higher compared to the boron-free foams. The obtained foams showed good thermal stability compared to classic, rigid polyurethane foams.

Kenaf Fiber/Pet Yarn Reinforced Epoxy Hybrid Polymer Composites: Morphological, Tensile, and Flammability Properties

The application of natural fibers is rapidly growing in many sectors, such as construction, automobile, and furniture. Kenaf fiber (KF) is a natural fiber that is in demand owing to its eco-friendly and renewable nature. Nowadays, there are various new applications for kenaf, such as in absorbents and building materials. It also has commercial applications, such as in the automotive industry. Magnesium hydroxide (Mg(OH)₂) is used as a fire retardant as it is low in cost and has good flame retardancy, while polyester yarn (PET) has high tensile strength. The aim of this study was to determine the horizontal burning rate, tensile strength, and surface morphology of kenaf fiber/PET yarn reinforced epoxy fire retardant composites. The composites were prepared by hybridized epoxy and Mg(OH)₂ PET with different amounts of KF content (0%, 20%, 35%, and 50%) using the cold press method. The specimen with 35% KF (epoxy/PET/KF-35) displayed better flammability properties and had the lowest average burning rate of 14.55 mm/min, while epoxy/PET/KF-50 with 50% KF had the highest tensile strength of all the samples. This was due to fewer defects being detected on the surface morphology of epoxy/PET/KF-35 compared to the other samples, which influenced the mechanical properties of the composites.

Reduction of PVA Aerogel Flammability by Incorporation of an Alkaline Catalyst

Sodium hydroxide was used as a base catalyst to reduce the flammability of poly(vinyl alcohol) (PVA) aerogels. The base-modified aerogels exhibited significantly enhanced compressive moduli, likely resulting in decreased gallery spacing and increased numbers of “struts” in their structures. The onset of decomposition temperature decreased for the PVA aerogels in the presence of the base, which appears to hinder the polymer pyrolysis process, leading instead to the facile formation of dense char. Cone calorimetry testing showed a dramatic decrease in heat release when the base was added. The results indicate that an unexpected base-catalyzed dehydration occurs at fire temperatures, which is the opposite of the chemistry normally observed under typical synthesis conditions.

Viscoelastic Polyurethane Foam with Keratin and Flame-Retardant Additives

Viscoelastic polyurethane (VEPUR) foams with increased thermal resistance are presented in this article. VEPUR foams were manufactured with the use of various types of flame retardant additives and keratin fibers. The structure of the modified foams was determined by spectrophotometric-(FTIR), thermal-(DSC), and thermogravimetric (TGA) analyses as well as by scanning electron microscopy (SEM). We also assessed the fire resistance, hardness, and comfort coefficient (SAG factor). It was found that the use of keratin filler and flame retardant additives changed the foams’ structure and properties as well as their burning behavior. The highest fire resistance was achieved for foams containing keratin and expanding graphite, for which the reduction in heat release rate (HRR) compared to VEPUR foams reached 75%.

Fire Behavior of Thermally Thin Materials in Cone Calorimeter

In this study, a representative set of thermally thin materials including various lignocellulosic and synthetic fabrics, dense wood, and polypropylene sheets were tested using a cone calorimeter at different heat fluxes. Time-to-ignition, critical heat flux, and peak of heat release rate (pHRR) were the main parameters considered. It appears that the flammability is firstly monitored by the sample weight. Especially, while the burning rate of thermally-thin materials does never reach a steady state in cone calorimeter, their pHRR appears to be mainly driven by the fire load (i.e., the product of sample weight and effective heat of combustion) with no or negligible influence of textile structure. A simple phenomenological model was proposed to calculate the pHRR taking into account only three parameters, namely heat flux, sample weight, and effective heat of combustion. The model allows predicting easily the peak of heat release rate, which is often considered as the main single property informing about the fire hazard. It also allows drawing some conclusions about the flame retardant strategies to reduce the pHRR..

Flammability, Tensile, and Morphological Properties of Oil Palm Empty Fruit Bunches Fiber/Pet Yarn-Reinforced Epoxy Fire Retardant Hybrid Polymer Composites

Oil palm empty fruit bunches (OPEFB) fiber is a natural fiber that possesses many advantages, such as biodegradability, eco-friendly, and renewable nature. The effect of the OPEFB fiber loading reinforced fire retardant epoxy composites on flammability and tensile properties of the polymer biocomposites were investigated. The tests were carried out with four parameters, which were specimen A (constant), specimen B (20% of fiber), specimen C (35% of fiber), and specimen D (50% of fiber). The PET yarn and magnesium hydroxide were used as the reinforcement material and fire retardant agent, respectively. The results were obtained from several tests, which were the horizontal burning test, tensile test, and scanning electron microscopy (SEM). The result for the burning test showed that specimen B exhibited better flammability properties, which had the lowest average burning rate (11.47 mm/min). From the tensile strength, specimen A revealed the highest value of 10.79 N/mm2. For the SEM morphological test, increasing defects on the surface ruptured were observed that resulted in decreased tensile properties of the composites. It can be summarized that the flammability and tensile properties of OPEFB fiber reinforced fire retardant epoxy composites were reduced when the fiber volume contents were increased at the optimal loading of 20%, with the values of 11.47 mm/min and 4.29 KPa, respectively.

Curing Behaviors, Mechanical and Dynamic Properties of Composites Containing Chloroprene and Butadiene Rubbers Crosslinked with Nano-Iron(III) Oxide

This paper discusses the curing behaviors, mechanical and dynamical properties of composites containing chloroprene rubber (CR) and butadiene rubber (BR) reinforced with mineral fillers. The iron(III) oxide nanoparticles were used as a crosslinking agent of the CR/BR blends. The research aimed to evaluate the effectiveness of nano-iron(III) oxide (nano-Fe₂O₃) as a new crosslinking agent while producing elastomeric materials with good mechanical properties and reduced flammability. The CR/BR (chloroprene rubber/butadiene rubber) blends were filled with silicas from natural resources (chalcedony, Neuburg silica earth) or silicas used in elastomer technology in many fields (aerosil, ultrasil). The results revealed that all composites were characterized by satisfactory tensile strength, tear resistance, and high resistance to fire. The filler dispersion in the elastomer matrix was carried out by using scanning electron microscopy (SEM), while the possibility of the filler-filler or filler-rubber interaction in the designed compositions was determined using the Payne effect and the Mullins effect.

Thermal Stability and Flammability of Epoxy Composites Filled with Multi-Walled Carbon Nanotubes, Boric Acid, and Sodium Bicarbonate

Epoxy composites filled with 0.5 wt% of multi-walled carbon nanotubes (MWCNTs), 10 and 15 wt% of boric acid and sodium bicarbonate separately, as well as composites filled with a combination of MWCNTs-boric acid and MWCNTs-sodium bicarbonate were prepared. The thermal behavior of the prepared samples was investigated under heating in oxidative environment using thermogravimetric analysis. The hardness was measured using the Shore D hardness test. To evaluate the flammability of the samples, the ignition temperature and time-to-ignition were determined. It was concluded that sodium bicarbonate in the studied concentrations (10 and 15 wt%) is not appropriate for use as a filler capable of improving the thermooxidative stability and reducing the flammability of epoxy polymers. The improvement in the thermal properties can be achieved by using the combination of boric acid and multi-walled carbon nanotubes as fillers. The thermooxidative destruction of the samples filled with boric acid passes more slowly and more evenly via the formation of B₂O₃ as a result of its decomposition.

Basalt Fiber-Based Flame Retardant Epoxy Composites: Preparation, Thermal Properties, and Flame Retardancy

We aimed to study the impact of surface modification of basalt fiber (BF) on the mechanical properties of basalt fiber-based epoxy composites. Four different types of pretreatment approaches to BF were used; then a silane coupling agent (KH550) was applied to further modify the pretreated BF, prior to the preparation of epoxy resin (EP)/BF composites. The combination of acetone (pre-treatment) and KH550 (formal surface treatment) for basalt fiber (BT-AT) imparted the EP/BF composite with the best performance in both tensile and impact strengths. Subsequently, such modified BF was introduced into the flame-retardant epoxy composites (EP/AP750) to prepare basalt fiber reinforced flame-retardant epoxy composite (EP/AP750/BF-AT). The fire behaviors of the composites were evaluated by vertical burning test (UL-94), limiting oxygen index (LOI) test and cone calorimetry. In comparison to the flame-retardant properties of EP/AP750, the incorporation of BF-AT slightly reduced LOI value from 26.3% to 25.1%, maintained the good performance in vertical burning test, but increased the peak of the heat release rate. Besides, the thermal properties and mechanical properties of the composites were investigated by thermogravimetric analysis (TGA), universal tensile test, impact test and dynamic mechanical analysis (DMA).

Low-Flammable Parahydrogen-Polarized MRI Contrast Agents

Many MRI contrast agents formed with the parahydrogen-induced polarization (PHIP) technique exhibit biocompatible profiles. In the context of respiratory imaging with inhalable molecular contrast agents, the development of nonflammable contrast agents would nonetheless be highly beneficial for the biomedical translation of this sensitive, high-throughput and affordable hyperpolarization technique. To this end, we assess the hydrogenation kinetics, the polarization levels and the lifetimes of PHIP hyperpolarized products (acids, ethers and esters) at various degrees of fluorine substitution. The results highlight important trends as a function of molecular structure that are instrumental for the design of new, safe contrast agents for in vivo imaging applications of the PHIP technique, with an emphasis on the highly volatile group of ethers used as inhalable anesthetics.

Synthesis and Application of Arylaminophosphazene as a Flame Retardant and Catalyst for the Polymerization of Benzoxazines

A novel type of phosphazene containing an additive that acts both as a catalyst and as a flame retardant for benzoxazine binders is presented in this study. The synthesis of a derivative of hexachlorocyclotriphosphazene (HCP) and meta-toluidine was carried out in the medium of the latter, which made it possible to achieve the complete substitution of chlorine atoms in the initial HCP. Thermal and flammability characteristics of modified compositions were investigated. The modifier catalyzes the process of curing and shifts the beginning of reaction from 222.0 °C for pure benzoxazine to 205.9 °C for composition with 10 phr of modifier. The additive decreases the glass transition temperature of compositions. Achievement of the highest category of flame resistance (V-0 in accordance with UL-94) is ensured both by increasing the content of phenyl residues in the composition and by the synergistic effect of phosphorus and nitrogen. A brief study of the curing kinetics disclosed the complex nature of the reaction. An accurate two-step model is obtained using the extended Prout–Tompkins equation for both steps.

Straw/Nano-Additive Hybrids as Functional Fillers for Natural Rubber Biocomposites

Currently, up to 215 million metric tons of harvestable straw are available in Europe, 50% of the crops come from wheat, 25% from barley and 25% from maize. More than half of the production remains undeveloped. The overproduction of straw in the world means that the current methods of its management are insufficient. The article describes the production method and characterization of natural rubber biocomposites containing cereal straw powder modified with functional nano-additives in the form of carbon black, silica and halloysite nanotubes. The use of cereal straw in the elastomer matrix should contribute to obtaining a product with good mechanical properties while ensuring a low cost of the composite. In turn, the application of the mechanical modification process will allow the combination of specific properties of raw materials to obtain new, advanced elastomeric materials. As part of the work, hybrid fillers based on mechanically modified cereal straw were produced. The impact of hybrid fillers on mechanical, rheometric and damping properties was assessed. The flammability and susceptibility of the obtained biocomposites to aging processes were determined. The use of hybrid fillers based on mechanically modified straw allowed us to obtain a higher cross-linking density of vulcanizates (even up to 40% compared to the reference sample), and thus higher values of the rheometric moment during the vulcanization process of rubber mixtures (from approx. 10% (10 phr of filler) up to 50% (30 phr of filler) in relation to the unfilled system) and higher hardness of vulcanizates (by about 30–70%). The curing time of the blends was slightly longer, but the obtained composites were characterized by significantly higher tensile strength. The use of fillers in the elastomer matrix increased the modulus at 100, 200 and 300% and the elongation at break. Moreover, greater resistance of vulcanizates to the combustion process was confirmed.