The Reference Values of Hair Content of Trace Elements in Dairy Cows of Holstein Breed

The objective of this study was to assess trace element content in hair of Holstein dairy cows bred in the Leningrad Region of Russia and to calculate the site-specific reference intervals. Hair content of arsenic, boron, cadmium, cobalt, chromium, copper, iron, mercury, iodine, lithium, manganese, lead, selenium, silicon, tin, strontium, vanadium, and zinc in 148 cows during first (n = 50), second (n = 48), and third (n = 50) lactation periods of life was determined using inductively coupled plasma mass spectrometry. Dietary intake of trace elements corresponded to the adequate values according to national and international recommendations. Comparative analysis did not reveal any significant differences in hair content of main essential elements on the animals depending on the number of lactation. At the same time, the first-lactation cows had significantly (P < 0.05) lower concentration of lead in hair as compared to the third-lactation cows and a higher level of mercury as compared to the second-lactation cows. The reference intervals and 90% confidence intervals for the lower and upper limits were calculated in agreement with the American Society for Veterinary Clinical Pathology Quality Assurance and Laboratory Standard Guidelines.

Establishing baseline trace metals in marine bivalves in China and worldwide: Meta-analysis and modeling approach

Bivalves are extensively employed as biomonitors of coastal pollution, but the comparability among different species and geographic environments needs to be further scrutinized. The present study conducted a meta-analysis of trace metals (Ag, Cd, Cr, Cu, Ni, Pb, Ti, and Zn) in the soft tissues of three groups of marine bivalves (oysters, mussels, and clams) collected from China and worldwide. By conducting cumulative frequency distribution analysis of metal distribution, we modeled the 5% cumulative values as the bio-baseline metal concentrations in these bivalves. We further modeled their potential baseline concentrations using a well-developed biokinetic model. The baseline concentrations of Cd, Cu, and Zn in the tissue-specific Environmental Quality Standards (EQSs) for China were 0.99, 34.5, and 340 μg/g dw in oysters, 0.38, 4.32, and 49.6 μg/g dw in mussels, and 0.35, 3.02, 51.4 μg/g dw in clams, respectively. Of the 8 metals examined in this study, the calculated baseline concentrations of Ag, Cr, Cd, Cu and Zn in the oysters were 3.7-48, 2.7-3.6, 2.6-2.8, 8.0-11.4, 6.6-6.8 times higher than those in the mussels and clams, and only Ti showed comparable baseline concentrations among the three bivalves (8.43-9.67 μg/g dw). These data strongly suggested the inter-group as well as inter-metal difference in the baseline metal concentrations in marine bivalves. Further, the potential baseline concentrations of Cd and Cu predicted by the biokinetic model were comparable to those modeled by the probability frequency distribution. Combined statistical frequency analysis and biokinetic modeling therefore provided an innovative method to establish the baseline metal concentrations in bivalves and the tissue-specific EQSs, which are now urgently needed for coastal management, biomonitoring, and geochemical records in the world.

Assessment of water quality and trace metal contaminations in Mondolkiri province in the Northeastern part of Cambodia

The aim of the present study is to investigate water quality and potential trace metal contaminations in the Northeastern part of Cambodia. Tube well (n = 35), hand-dug well (n = 18), channel (n = 10) and lake/pond (n = 8) water samples were randomly collected from Mondolkiri province which is located in the Northeastern highland of Cambodia. A water sample was collected in two different bottles. One was filled in 30-mL polyethylene bottle after which was acidified to pH < 2 with concentrated HNO₃. Another was filled in 250-mL polyethylene bottle. The collected water sampled was stored in a cooler during fieldwork and transferred to a fridge where they are stored at 4 °C for analysis. The measurement of pH, ORP, dissolved oxygen (DO), turbidity, conductivity, total dissolved solids (TDS) and salinity was taken at laboratory following standard procedures. All chemical measurement of trace metals were taken by inductively coupled plasma mass spectrometry (ICP-MS). Analytical results reveal that tube well (47.1%), hand-dug well (77.8%) and channel water (20%) have pH < 6.5. Turbidity of tube well (32.4%), hand-dug well (5.6%), lake water (12.5%) and all channel water samples are exceeded Cambodia regulation of 5 NTU. Mean As, Cd, Cr, Cu, Ni, Pb and Zn concentrations in Mondolkiri's water sources are below Cambodian drinking water quality standard and WHO's drinking water quality guideline. However, the upper range of Pb in tube well and channel water and Zn in tube well are exceeding Cambodia regulation. Concurrently, the mean concentrations of Fe and Mn in tube well and channel water are exceeded Cambodian aesthetic guideline of 300 µg L^-1 and 100 µg L^-1, respectively. This study suggests that appropriate treatment technologies are necessary for residents in the Mondolkiri province to access to clean water and minimize their potential health risks.

Nutritionally recommended food for semi- to strict vegetarian diets based on large-scale nutrient composition data

Diet design for vegetarian health is challenging due to the limited food repertoire of vegetarians. This challenge can be partially overcome by quantitative, data-driven approaches that utilise massive nutritional information collected for many different foods. Based on large-scale data of foods' nutrient compositions, the recent concept of nutritional fitness helps quantify a nutrient balance within each food with regard to satisfying daily nutritional requirements. Nutritional fitness offers prioritisation of recommended foods using the foods' occurrence in nutritionally adequate food combinations. Here, we systematically identify nutritionally recommendable foods for semi- to strict vegetarian diets through the computation of nutritional fitness. Along with commonly recommendable foods across different diets, our analysis reveals favourable foods specific to each diet, such as immature lima beans for a vegan diet as an amino acid and choline source, and mushrooms for ovo-lacto vegetarian and vegan diets as a vitamin D source. Furthermore, we find that selenium and other essential micronutrients can be subject to deficiency in plant-based diets, and suggest nutritionally-desirable dietary patterns. We extend our analysis to two hypothetical scenarios of highly personalised, plant-based methionine-restricted diets. Our nutrient-profiling approach may provide a useful guide for designing different types of personalised vegetarian diets.

High Precision Zinc Stable Isotope Measurement of Certified Biological Reference Materials Using the Double Spike Technique and Multiple Collector-ICP-MS

Biological reference materials with well-characterised stable isotope compositions are lacking in the field of 'isotope biochemistry', which seeks to understand bodily processes that rely on essential metals by determining metal stable isotope ratios. Here, we present Zn stable isotope data for six biological reference materials with certified trace metal concentrations: fish muscle, bovine muscle, pig kidney, human hair, human blood serum and human urine. Replicate analyses of multiple aliquots of each material achieved reproducibilities (2sd) of 0.04-0.13‰ for δ66/64Zn (which denotes the deviation of the 66Zn/64Zn ratio of a sample from a pure Zn reference material in parts per 1000). This implies only very minor isotopic heterogeneities within the samples, rendering them suitable as quality control materials for Zn isotope analyses. This endorsement is reinforced by (i) the close agreement of our Zn isotope data for two of the samples (bovine muscle and human blood serum) to previously published results for different batches of the same material and (ii) the similarity of the isotopic data for the samples (δ66/64Zn ≈ -0.8 to 0.0‰) to previously published Zn isotope results for similar biological materials. Further tests revealed that the applied Zn separation procedure is sufficiently effective to enable accurate data acquisition even at low mass resolving power (M/ΔM ≈ 400), as measurements and analyses conducted at much higher mass resolution (M/ΔM ≈ 8500) delivered essentially identical results.

Background concentrations and reference values for heavy metals in soils of Cuba

The potential threat of heavy metals to human health has led to many studies on permissible levels of these elements in soils. The objective of this study was to establish quality reference values (QRVs) for Cd, Pb, Zn, Cu, Ni, Cr, Fe, Mn, As, Hg, V, Ba, Sb, Ag, Co, and Mo in soils of Cuba. Geochemical associations between trace elements and Fe were also studied, aiming to provide an index for establishing background concentrations of metals in soils. Surface samples of 33 soil profiles from areas of native forest or minimal anthropic influence were collected. Samples were digested (USEPA method 3051A), and the metals were determined by ICP-OES. The natural concentrations of metals in soils of Cuba followed the order Fe > Mn > Ni > Cr > Ba > V > Zn > Cu > Pb > Co > As > Sb > Ag > Cd > Mo > Hg. The QRVs found for Cuban soils were as follows (mg kg(-1)): Ag (1), Ba (111), Cd (0.6), Co (25), Cr (153), Cu (83), Fe (54,055), Mn (1947), Ni (170), Pb (50), Sb (6), V (137), Zn (86), Mo (0.1), As (19), and Hg (0.1). The average natural levels of heavy metals are above the global average, especially for Ni and Cr. The chemical fractionation of soil samples presenting anomalous concentrations of metals showed that Cu, Ni, Cr, Sb, and As have low bioavailability. This suggests that the risk of contamination of agricultural products via plant uptake is low. However, the final decision on the establishment of soil QRVs in Cuba depends on political, economic, and social issues and in-depth risk analyses considering all routes of exposure to these elements.

Assessment of sampling and analytical uncertainty of trace element contents in arable field soils

Assessment of trace element contents in soils is required in Germany (and other countries) before sewage sludge application on arable soils. The reliability of measured element contents is affected by measurement uncertainty, which consists of components due to (1) sampling, (2) laboratory repeatability (intra-lab) and (3) reproducibility (between-lab). A complete characterization of average trace element contents in field soils should encompass the uncertainty of all these components. The objectives of this study were to elucidate the magnitude and relative proportions of uncertainty components for the metals As, B, Cd, Co, Cr, Mo, Ni, Pb, Tl and Zn in three arable fields of different field-scale heterogeneity, based on a collaborative trial (CT) (standardized procedure) and two sampling proficiency tests (PT) (individual sampling procedure). To obtain reference values and estimates of field-scale heterogeneity, a detailed reference sampling was conducted. Components of uncertainty (sampling person, sampling repetition, laboratory) were estimated by variance component analysis, whereas reproducibility uncertainty was estimated using results from numerous laboratory proficiency tests. Sampling uncertainty in general increased with field-scale heterogeneity; however, total uncertainty was mostly dominated by (total) laboratory uncertainty. Reproducibility analytical uncertainty was on average by a factor of about 3 higher than repeatability uncertainty. Therefore, analysis within one single laboratory and, for heterogeneous fields, a reduction of sampling uncertainty (for instance by larger numbers of sample increments and/or a denser coverage of the field area) would be most effective to reduce total uncertainty. On the other hand, when only intra-laboratory analytical uncertainty was considered, total sampling uncertainty on average prevailed over analytical uncertainty by a factor of 2. Both sampling and laboratory repeatability uncertainty were highly variable depending not only on the analyte but also on the field and the sampling trial. Comparison of PT with CT sampling suggests that standardization of sampling protocols reduces sampling uncertainty, especially for fields of low heterogeneity.

Defining reference values of trace elements in the tear film: diagnostic methods and possible applications

The study has been performed on tears of apparently healthy subjects who live and work in urban and rural areas, respectively. After the collection the following elements were investigated: chromium (Cr); arsenic (As); copper (Cu); zinc (Zn); selenium (Se); rubidium (Rb); barium (Ba); lead (Pb) and cobalt (Co). Significantly higher values of As were found in subjects living and working in rural areas as compared to those found in urban area residents (0.290 vs. 0.025; p<0.001). Conversely, Ba and Pb were significantly lower in rural area residents (1.10 vs. 2.50, p=0.027 and 1.70 vs. 1.10, p=0.057, respectively). Our data show that trace elements analysis in tears is possible; further studies could define if it could be a reliable biomarker in persons exposed to high concentration of trace elements due to working or environmental reasons.

Homogeneity and stability studies during the preparation of a laboratory reference material of soy leaves for the determination of metals

The homogeneity and stability of metals were tested in a candidate laboratory reference material of soy leaves. Inductively coupled plasma-optical emission spectrometry was used to quantify calcium, magnesium, manganese, iron, zinc, copper, and vanadium. A 6 kg amount of the material, which was dried, ground, and classified as mesh 60, was distributed among 100 bottles. The between-bottle homogeneity test was established by analyzing two subsamples from nine bottles. For the within-bottle test, five determinations of each element of a single bottle were performed. The stability test was performed at temperatures of -10, +27, and +40 degrees C, and after storage times of 4, 12, 24, and 52 weeks. The obtained results indicated that the material was homogeneous and stable under the conditions studied.

Chemical, microbial and physical evaluation of commercial bottled waters in greater Houston area of Texas

Due to the increased demand and consumption of bottled water in the United States, there has been a growing concern about the quality of this product. Retail outlets sell local as well as imported bottled water to consumers. Three bottles for each of 35 different brands of bottled water were randomly collected from local grocery stores in the greater Houston area. Out of the 35 different brands, 16 were designated as spring water, 11 were purified and/or fortified tap water, 5 were carbonated water and 3 were distilled water. Chemical, microbial and physical properties of all samples were evaluated including pH, conductivity, bacteria counts, anion concentration, trace metal concentration, heavy metal and volatile organics concentration were determined in all samples. Inductively coupled plasma/mass spectrometry (ICPMS) was used for elemental analysis, gas chromatography with electron capture detector (GCECD) as well as gas chromatography mass spectrometry (GCMS) were used for analysis of volatile organics, ion chromatography (IC) and selective ion electrodes were used for the analysis of anions. Bacterial identification was performed using the Biolog software (Biolog, Inc., Hayward, Ca, USA). The results obtained were compared with guidelines of drinking water recommended by the International Bottled Water Association (IBWA), United States Food and Drug Administration (FDA), United States Environmental Protection Agency (EPA) and the World Health Organization (WHO) drinking water standard. The majority of the analyzed chemicals were below their respective drinking water standards for maximum admissible concentrations (MAC). Volatile organic chemicals were found to be below detection limits. Four of the 35 brands of the bottled water samples analyzed were found to be contaminated with bacteria.

Extractability of trace elements in precipitated calcium carbonate (PCC) waste from an integrated pulp and paper mill complex

From the utilization point of view, it is notable that the total element concentrations in the precipitated calcium carbonate (PCC) waste were significantly lower than the maximal allowable heavy metal concentrations for fertilizers used in agriculture and in forestry, set on the basis of the EU and Finnish legislation. The easily soluble Ca concentration of 168.5g kg(-1) (d.w.) in PCC waste was 105 times higher than the typical value of 1.6g kg(-1) (d.w.) in the coarse mineral soil in Finland indicates that the PCC waste is a potential agent for soil remediation and for improving soil fertility if it is used as fertilizer. According to a five-stage sequential extraction procedure, the highest concentrations of most of the elements occurred either in HF+HNO3+HCl or H2O2+CH3COONH4 fraction. This means that the major part of the elements retained in the PCC waste are not easy to extract (leach) under conditions normally found in nature. This is beneficial since, if inorganic materials and by-products are utilized in earth construction, the content of harmful compounds must be low and the harmful components must be tightly bound to the matrix.

[Determination of trace elements in radix ophiopogonis by HG-ICP-AES]

In this paper, a method of microwave digestion technique for the contents determination of trace elements Ni, Zn, Mn, Cu, Mg, Fe, Ca and Pb in radix ophiopogonis by hydride generation inductively coupled plasma atomic emition spectrometry (HG-ICP-AES) was reported. Its recovery ratio obtained by standard addition method ranged between 97.8% and 102.5%, and its RSD was lower than 4.0%. The results of the determination show that radix ophiopogonis is rich in the inorganic elements such as Fe, and the content of Zn in radix ophiopogonis of Zhejiang is much higher in radix ophiopogonis of Sichun. The result will provide scientific data for the study on the elements in radix ophiopogonis and on their relativity of medicine efficacy.

[Determination of trace impurities in high purity titanium dioxide by high resolution inductively coupled plasma mass spectrometry]

An analytical method using high resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) for the rapid simultaneous determination of twenty six elements (Be, Na, Mg, Al, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Ge, As, Mo, Cd, Sn, Sb, Ba, Ce, Nd, Sm, Pt, Pb and Bi) in high purity titanium dioxide was described. Samples were decomposed by (NH4)2SO4 and H2SO4. Most of the spectral interferences could be avoided by measuring in the high-resolution mode. The matrix effects due to the presence of excess sulfuric acid and Ti were evaluated. The optimum conditions for the determination were tested and discussed. The standard addition method was employed for quantitative analysis. The detection limits are 0.004-0.63 microg x g(-1), the recovery ratio is 87.6%-106.4%, and the RSD is less than 3.5%. The method is accurate, quick and convenient. It has been applied to the determination of trace impurities in high purity titanium dioxide with satisfactory results.

[Comparative study on quality of Flos Lonicerae between geo-authentic and non-authentic producing areas]

OBJECTIVE

To compare the quality of Flos Lonicerae between different producing areas.

METHOD

ICP-AES, UV and HPLC were used to determine the contents of trace elements, chlorogenic acid, total flavonoids, five iridoid glucosides, hederagenin, and oleanolic acid. SAS software system was used to perform data and cluster analyses.

RESULT

The results showed that the geo-authentic crude drug was lower in the contents of Cr and Pb but higher in the contents of chlorogenic acid, total flavonoids, five iridoid glucosides, hederagenin, and oleanolic acid than the non-authentic crude drug.

CONCLUSION

The geo-authentic crude drug of Flos Lonicerae is better in quality than the non-authentic crude drug based on the modern chemical analyses, which confirms the validity of traditional geo-based classification.

Assessment of implementation of a standardized parenteral formulation for early nutritional support of very preterm infants

INTRODUCTION

Parenteral nutrition (PN) plays an important role in the nutritional support of very preterm newborns. It has been suggested that a high proportion of PN orders could be standardized. In 2002, we implemented in our unit the preparation of three standardized formulations for PN adapted to the nutritional requirements of premature infants<32 weeks. Following this change of practice, a retrospective observational study was conducted to evaluate the relevance of the implemented standardized PN regime. Twenty premature inborn infants<32 weeks gestation who had received standardized (STD) PN in 2003 were matched for 20 infants who had received individualized (IND) PN in 2001. Adequacy of nutrition was assessed by comparing daily intravenous nutrient intake and biochemical parameters during the first week. Amino-acid intakes on day 3 were higher in the STD group (1.5+/-0.2 g/kg/d vs. 0.9+/-0.5, p<0.001), and the calcium phosphate intakes were better balanced. The cumulated intake of amino acids for the first week was greater in the STD group (+20% ; p=0.0003). Biochemical parameters were similar in both groups. Insulin infusions were less frequent in the STD group (p<0.06).

CONCLUSION

Standardized parenteral formulations provided higher early intakes of amino acid and glucose, a better calcium phosphate ratio, and a greater amount of amino-acid intakes during the first week while maintaining the same biochemical parameters. This strategy forms part of an approach concerning quality control and the respect of good professional practice for the preparation of parenteral nutrition solutions.

Health effects of airborne particulate matter trace elements

The effects of airborne particulate matter (PM) trace elements on health are widely concerned nowadays. Many achievements have been made while many unknowns exist. This article reports the recent research progresses, describes the effects of exposure to PM trace elements on health epidemiological evidence, toxicology findings, and raises some questions for future studies.

[Determination of eight trace elements in the flowers of Hylocereus undatus by FAAS]

The effects of different sample digestives for the flowers of Hylocereus undatus are compared. Eight trace elements in the flowers of Hylocereus undatus were determined by flame atomic absorption spectrophotometer. The result shows that the RSD and recovery are better if the flowers of Hylocereus undatus was digested with HNO3-HClO4 (5:1) mixed acid, and the flowers of Hylocereus undatus contains many essential elements among which the contents of Fe, Mn and Zn are higher than those of Ni and Cu. Co and Cd were not determined, but Pb was determined. The experimental results showed that the detection limits were all smaller than 0.086 microg x mL(-1), the RSDs (n = 8) all smaller than 8.37%, and the addition standard recovery (ASR) (n = 8) was 79.69%-118.6% for all elements.

[Assessment of diet of students from Orenburg region]

The article this research is devoted to the Orenburg student youth diet. The revealed deficiency of major nutrients (protein, fats and especially carbohydrates), as vitamins (C, PP, E, D, B groups) and analysis of diet ration concerning basis nourishing components, vitamins, macro- micro elements (Zn, Cu, I, Cr, Se).

Radiochemical neutron-activation analysis of uncertified ultra-trace rare earth elements in two biological certified reference materials

Radiochemical neutron activation analysis (RNAA) has been used for the determination of eight rare earth elements (La, Ce, Nd, Sm, Eu, Tb, Yb, and Lu) in two Chinese certified reference materials (CRM), GBW 08503 (wheat powder) and GBW 09101 (human hair). These determinations are important for possible certification of the above mentioned ultra-trace elements, so far not certified. A simple one-step (REE)F3 precipitation was used. Chemical yields were determined for all relevant elements by means of tracer experiments. The two CRM were also analyzed by inductively coupled plasma-mass spectrometry (ICP-MS) to compare the merits and draw-backs of these two major trace analytical techniques for these particular elements. RNAA was proven to be a reliable technique for ultra-trace analysis, especially in the certification of some ultra-trace elements.

Honey as a candidate reference material for trace elements

The feasibility of producing and certifying new certified reference materials (CRMs) for trace elements in honey was investigated. Preliminary steps for preparation of candidate materials are performed at the Institute for Reference Materials and Measurements, Joint Research Centre of the European Commission (EC-JRC-IRMM). Two different types of honey, Acacia and Eucalyptus, were tested for determination of 10 trace elements. To each type of honey was added a given amount of high purity deionized water to obtain aqueous solutions with an acceptable degree of homogeneity which would require only minimal manipulation before analysis. Average values obtained for the trace elements by means of inductively coupled plasma-based techniques were as follows (in microg/ kg +/- SD): Acacia honey, As, 1.10+/-0.20; Cd, 0.328+/-0.035; Cr, 1.90+/-0.22; Cu, 67.0+/-5; Fe, 215+/-30; Hg, < 0.75; Mn, 82.1+/-6.2; Ni, 21.0 3.0; Pb, 2.30+/-0.25; Se, 9.10+/-1.2; Zn, 167+/-22; Eucalyptus honey, As, 5.99+/-0.10; Cd, 0.592+/-0.074; Cr, 1.50+/-0.07; Cu, 219 24; Fe, 1008+/-114; Hg, <0.75; Mn, 1009+/-51; Ni, 11.3+/-1.5; Pb, 5.00+/-0.40; Se, 5.60+/-0.91; Zn, 791+/-91. When these 2 pilot materials are ready, the certification project will be launched in full compliance with current rules set by EC-JRC-IRMM. If the project is successful, the new CRMs will be put primarily at the disposal of the National Reference Laboratories for trace elements.

Uptake of cadmium, copper, iron, manganese, and zinc in mushrooms (Boletaceae) from Croatian forest soil

The concentration of trace elements (Cd, Cu, Fe, Mn, and Zn) was measured in different species of mushrooms (Boletaceae) and correlated with corresponding elements in soil. Five different species of Boletaceae mushrooms and soil samples were collected from forests of Varazdin county in Croatia. Trace elements were analyzed by atomic absorption spectrometry in mushrooms and in EDTA-extracted soil. The results showed that Cd, Cu, and Zn are concentrated in mushroom tissue from soil with transfer factors (mushroom/soil) of 27.0,10.5, and 12.5, respectively. Cadmium incorporated much less in Leccinum (mean 0.73 mg/kg dry weight) than in Boletus, Xerocomus, or Gyroporus (respective means, 6.8, 8.4, and 12.3 mg/kg). Copper and Zn were accumulated in all collected mushrooms (14.7-35.6 and 109-179 mg/kg, respectively) with no difference among species. There was no accumulation of Fe and Mn in mushrooms, but concentrations differed between species, with lowest values in Leccinum. Iron varied from 31 to 878 mg/kg and Mn from 2.9 to 409 mg/kg. Correlations between elements in mushrooms and soil were significant only for Mn. Because no significant correlations for Cd, Cu, Zn, and Fe between mushrooms and soil were found, more studies are needed with only one species of mushrooms collected at locations with different levels of soil contamination. In spite of higher concentrations of Cd in some Boletaceae species, it is assumed that Cd intake through moderate mushroom consumption remains below suggested Provisional Tolerable Weekly Intake (FAO/WHO).

What's new with the NRC certified reference material program

The environmental CRMs currently available from NRC Ottawa comprise four natural waters for trace elements, four biological tissues for trace elements and methylmercury, three marine sediments for major and trace elements (one sediment has certified values for butyltins) and one fish tissue for organochlorines (PCBs, dioxins). Although significant effort has been expended to maintain this suite of materials, several new initiatives have also recently been completed or are in progress. The certified value for arsenobetaine in Dogfish Muscle CRM DORM-2 has been established. The certification approaches, as well as the studies to determine extraction efficiency of this organoarsenic compound, are presented. A stability study has been completed for Hg in a natural water sample and plans are underway for production of a CRM. Assessment of micronutrient stability in seawater for the purposes of CRM production is continuing and progress on this initiative is discussed.

Trends in certified reference materials for the speciation of trace elements

The measurement of the chemical species of elements (instead of the total element concentration) has become an irreversible trend in analytical chemistry. The motivation lies in the fact that the biochemical and geochemical behaviour of an element is governed by its species. Quality assurance of the analytical procedures used for speciation analysis requires the analysis of representative reference materials, certified for the relevant species. Up to now the number of existing certified reference materials for trace element species is very limited. The most important ones are environmental CRMs certified for trialkyltin compounds, methylmercury, Cr(III)/Cr(VI) and food CRMs certified for arsenic species and methylmercury. Major developments are to be expected in CRMs focussed on environmental problems, including waste treatment, on bioavailability of trace elements in food and on bio-monitoring in occupational health and hygiene. It is, however, unlikely that the producers of CRMs will ever be able to cover all needs. Add to this that many, very active species are notoriously unstable and/or short living and require in-situ analysis. This will lead to different analytical developments, such as analyses in-situ, where the classical concept of CRMs may not stand firm anymore.

Reference values for trace and ultratrace elements in human serum determined by double-focusing ICP-MS

Reference values for trace and ultratrace elements concentrations in healthy human serum, measured by double-focusing inductively coupled plasma-mass spectrometry (ICP-MS), are presented. Blood donors from Asturias (Spain) were selected as the reference population (n=59). Blood samples were collected, after donation, taking the necessary precautions to avoid contamination. All subjects analyzed had normal renal function and nutritional status, as shown from their creatinine and albumin levels. A total number of 14 elements (Al, Ca, Cr, Mn, Fe, Co, Cu, Zn, Rb, Sr, Mo, Cd, Pb, and U) were monitored almost simultaneously. Serum samples were diluted 1+4 with ultrapure water and matrix interferences were corrected using Sc, Ga, Y, and Tl as internal standards. Fe, Cu, and Zn were also determined by isotope dilution analysis (IDA). Reference trace element concentrations intervals observed containing 95% of the reference distribution after excluding outliers are presented. Fourteen serum samples from hemodialysis patients were also analyzed for comparison. High levels of Al, Cr, Sr, Mo, Mn, Pb, U, Co, and Cu and low levels of Fe, Zn, and Rb were found in the serum samples from hemodialysis patients compared to the corresponding reference values observed in this work.

Trace element levels in drinking water and cognitive function among elderly Chinese

The relation between trace element levels in drinking water and cognitive function was investigated in a population-based study of elderly residents (n = 1,016) in rural China in 1996-1997. Cognitive function was measured using a Chinese translation of the Community Screening Interview for Dementia. A mixed effects model was used to evaluate the effect of each of the elements on cognitive function while adjusting for age, sex, and educational level. Several of the elements examined had a significant effect on cognitive function when they were assessed in a univariate context. However, after adjustment for other elements, many of these results were not significant. There was a significant quadratic effect for calcium and a significant zinc-cadmium interaction. Cognitive function increased with calcium level up to a certain point and then decreased as calcium continued to increase. Zinc showed a positive relation with cognitive function at low cadmium levels but a negative relation at high levels.

Assessment of reference values for elements in human hair of urban schoolboys

Hair samples of youngsters (3-15 years of age) from several urban areas of Rome were analyzed to determine the content of 19 minor and trace elements with the aim of assessing Reference Values (RVs). Thirteen essential elements were taken into account, Ca, Co, Cr, Cu, Fe, Mg, Mn, Mo, Ni, P, Se, V and Zn. On the other hand, Al, As, Cd, Pb, Sr and Ti were also evaluated on the basis of their potential toxicity. Procedures were developed for the collection, storage and pre-analytical treatment of samples. Measurements were performed by inductively coupled plasma atomic emission spectrometry. Subgroups were formed according to age and sex. Significant differences were found for certain elements depending on age and sex. This was the case, e.g., for Ca which showed a mean value of 336 mg/kg for males and of 537 mg/kg for females. The sex-dependent pattern for this element was also apparent when the three age subgroups of 3-6, 7-10 and 11-15 years were compared. The overall RVs obtained (mg/kg) are as follows Al, 10.2; As, 0.09; Ca, 450; Cd, 0.23; Co, 0.67; Cr, 0.99; Cu, 22.1; Fe, 19.0; Mg, 28.0; Mn, 0.35; Mo, 0.43; Ni, 1.49; P, 195; Pb, 7.11; Se, 0.77; Sr, 1.20; Ti, 0.79; V, 1.22; and Zn 150.

Trace elements in diabetes mellitus. Peculiarities and clinical validity of determinations in blood cells

Significantly more information about trace element status can be obtained by investigating concentrations in blood cells instead of only evaluating the concentrations in plasma. This can be explained by the fact that essential trace elements such as zinc, copper, chromium and selenium take part in a variety of enzymatic processes on a molecular cellular level. Ignoring these important biochemical roles, trace element concentrations determined in whole blood or plasma very often lead to conclusions contrary to the actual intracellular concentration. Especially in metabolic diseases like diabetes mellitus, conclusions drawn from trace element concentrations in blood cells usually offer more valuable clinical information about the metabolic state than trace element concentrations in plasma or whole blood. In the present investigation copper and zinc concentrations were increased in all blood fractions of diabetic patients (IDDM). In insulin-dependent diabetic children significantly higher values of zinc in erythrocytes were also found, and they were higher in patients with poor metabolic control (HbA1c>9%). When different blood fractions in diabetic patients (NIDDM) were compared with a control group, chromium was significantly increased in plasma and polymorphonuclear cells. Patients with IDDM had pronounced decreased selenium concentrations in erythrocytes as compared to controls.

In vivo energy dispersive X-ray fluorescence for measuring the content of essential and toxic trace elements in teeth

The calibration and application of a facility, based on energy dispersive X-ray fluorescent analysis (EDXRF) using 109Cd as an excitation source, for in vivo and in vitro estimation of Ca, Pb, Sr and Zn in tooth enamel is described. During the in vivo measurements, the device ensures tissue protection of face and mouth cavity from radiation, and only a small part of tooth surface under study is irradiated. To calibrate the facility, the contents of Ca, Sr and Zn were analyzed simultaneously in the enamel of 50 teeth by EDXRF and instrumental neutron activation analysis (INAA). Standards prepared from powdered tooth enamel with additions of chemically pure lead compounds were used to calibrate for lead graduation. Enamel calcium is suggested as an internal standard during in vivo EDXRF of teeth. The content of enamel Sr, Zn and Pb was determined by EDXRF in 35 permanent intact teeth of teenagers and adults. It was shown that lead concentration didn't exceed 3 micrograms/g for all the teeth.

Background and rationale behind the SU.VI.MAX Study, a prevention trial using nutritional doses of a combination of antioxidant vitamins and minerals to reduce cardiovascular diseases and cancers. SUpplementation en VItamines et Minéraux AntioXydants Study

The "SUpplementation en VItamines et MinérauxAntioXydants" (SU.VI.MAX) study is a randomized double-blind, placebo-controlled, primary prevention trial designed to test the efficacy of daily supplementation with antioxidant vitamins (vitamin C, 120 mg; vitamin E, 30 mg; and beta-carotene, 6 mg) and minerals (selenium, 100 micrograms; and zinc, 20 mg), at nutritional doses (one to three times the daily recommended dietary allowances), in reducing the frequency of major health problems in industrialized countries, and especially the main causes of premature death (cancers and cardiovascular diseases). The study involves 12,735 eligible subjects (women aged 35 to 60 years; men aged 45 to 60 years) included in 1994 in France. They will be followed up for 8 years. The objectives and the specific design of this intervention study are linked to its public health aim. The targeted population is the general population (not simply high-risk subjects) and the antioxidant agents tested are being administered at a level which is not pharmacologic and which may be attained by dietary intake of natural sources of these micronutrients and/or enriched foods. The amounts we are testing in the SU.VI.MAX study are those which, in observational studies have been associated with the lowest risk of diseases. This report presents the rationale and discusses the justification of the design, doses and combination of antioxidant micronutrients chosen in the SU.VI.MAX study.

Determination of total iodine in nutritional and biological samples by ICP-MS following their combustion within an oxygen stream

A mineralization and determination method for total iodine in nutritional and biological samples is described. Combustion of the sample in an oxygen stream is followed by collection of the combustion products in a 5% water-soluble tertiary amine solution. Iodine is determined by inductively coupled plasma mass spectrometry. The accuracy and precision of the quantitative iodine analysis using standard addition is better than +/- 10%. A semi-quantitative analysis of four standard reference materials is evaluated. Owing to the presence of low-level iodine contaminant in the blank solution, the determination limit of the method is +/- 10 micrograms kg-1. Good agreement with certified iodine values is obtained for six reference materials. The use of the tertiary amine matrix solution permits the simultaneous determination of iodine and other trace metals of biological and toxicological importance, including Mn, Co, Ni, Cu, Zn, Rb, Cd, and Pb.

Toxicity considerations when revising the Nordic nutrition recommendations

The Nordic countries have issued common nutrition recommendations since 1980. In connection with the 3rd revision, a joint working group of nutritionists and toxicologists assessed the toxicology of selected trace elements. Values for upper limits of intake were established for iron, zinc, iodine and selenium. The safety factors between the lowest intakes at which adverse effects had been reported and the suggested upper limits of intake were small. In the toxicological evaluation of upper safe intake levels of essential trace elements, interactions between trace elements as well as long-term exposure to moderately elevated trace element intakes have to be considered.

Between a rock and a hard place: methods for setting dietary allowances and exposure limits for essential minerals

For each essential trace element, there are two ranges of intake associated with adverse health effects: intakes that are too low and can lead to nutritional deficits and intakes that are too high and can lead to toxicity. Between these two ranges, there is a range of safe and adequate intakes that is compatible with good health; the challenge is to define that range quantitatively. The exposure limit for toxicity traditionally has been determined by dividing a "no-observed-adverse-effect level," often from studies in experimental animals, by a series of uncertainty factors. Dietary allowances to meet nutritional requirements, on the other hand, have been based primarily on data in humans. Uncertainty, variability and limitations in the data base tend to increase estimates of nutritional requirements and decrease estimated toxic exposure limits, driving the values closer together. Chromium (III) and zinc are contrasting cases. Other factors, such as bioavailability, selection of the critical effect and interactions also can play important roles. Close coordination between the nutrition and toxicology communities, as envisioned in the NRC Food and Nutrition Board initiative on Dietary Reference Intakes, is essential in establishing acceptable ranges of intake for trace elements.

The effect of essentiality on risk assessment

Metals are ubiquitous in the human environment, making exposure inevitable and requiring scientifically sound risk assessment methodology to ensure adequate health protection. Within this area, as part of its ongoing efforts to improve and harmonize internationally approaches to risk assessments, the International Program on Chemical Safety (IPCS) has initiated work to improve the risk assessment procedures for essential trace elements (ETEs). Zn, Cu, Se, Cr, and MO are ETEs for humans, with increasing evidence of an essential role for boron (B). For ETEs, there is a range of daily intake within which the organism maintains homeostasis. At intakes below this range, there is an increased risk from deficiency, and at intakes above the range toxicity may develop. Obviously, for ETEs one cannot assume zero exposure is without risk. Adequate health protection will require the cooperative effort of scientists in nutrition and toxicology to develop the limits of the accepted range for ETEs considering such unique properties of metals as bioavailability, speciation, interactions, and biokinetics. Based on previous work by other groups and the recommendations of an IPCS consultation, a scientific monograph will be completed by IPCS. It will examine present risk assessment methodology for ETEs, and develop scientific principles supporting use of a homeostatic model for the development of dietary reference values and tolerable daily intakes. The objective is to develop an internationally accepted methodology for assessing ETEs as part of the IPCS effort to harmonize approaches to risk assessment worldwide. A recent IPCS Task Group on Zn highlighted some of the scientific issues that require resolution to avoid an overlap of the recommended daily intake based on nutritional needs with that based on toxicity and will serve as a case study.

Risk assessment of essential trace elements: new approaches to setting recommended dietary allowances and safety limits

By definition, every essential trace element must have a range of intakes safe from toxicity but adequate enough to meet nutrition requirements. That range is part of the total dose-response curve and its lower and upper limits are delineated on the basis of nutrition and toxicology data, respectively. Close coordination of activities to set these limits is necessary to avoid recommendations that are either impractical (narrow zones of safe and adequate intakes) or contradictory (overlapping limits, i.e., no zones of safe and adequate intakes).

Standard reference materials and data quality assurance: the lesson from the analysis of trace elements

The problem of having accurate and precise analytical data of the concentrations of trace elements and compounds in bioclinical studies is of fundamental importance. This can be conveniently faced if appropriate standard reference materials, with known concentrations of the analyte object of study, are available. This paper reviews the present situation of these standard materials in the field of trace element analysis in biological specimens. The most important requirements in the preparation and in the application of these materials are presented and discussed.

Instrumental neutron activation analysis of geological and biological reference materials using the ko-standardization method

The ko-standardization method used in instrumental neutron activation analysis (INAA) was applied to the determination of some elements in geological and biological reference materials. We analyzed NBS SRM 1572 Citrus Leaves and SRM 1645 River Sediment and the CRM materials, IAEA Soil-7, SL-1, and MA-A-2. Comparison is made with reference values whenever available. Good agreement is found. The potential of the ko-standardization method in reactor INAA is discussed.

Multielement determination in rice, wheat, and barley by instrumental neutron activation analysis

INAA has been used for the determination of Na, Mg, Al, Cl, K, Sc, Cr, Mn, Fe, Co, Cu, Zn, As, Se, Br, Rb, Sr, Mo, and W in grains of rice, wheat, and barley, which were collected from different plant fields in Iraq. Samples and standards were irradiated in the IRT-5000 reactor, at neutron fluxes of 2 x 10(13) cm-2.s-1 and 3.2 x 10(11) cm-2.s-1. Interferences of photopeaks with each other were considered, and reaction interferences were calculated and determined experimentally. Accuracy of our method was assessed by the analysis of IAEA standards Wheat Flour and Bovine liver. A good agreement has been achieved between the present results and recommended values. The precision and detection limit were determined for all elements in all types of grain.

Instrumental neutron activation analysis of biological samples

The elemental compositions of 18 biological reference materials have been processed, for 14 stepped combinations of irradiation/decay/counting times, by the INAA Advance Prediction Computer Program. The 18 materials studied include 11 plant materials, 5 animal materials, and 2 other biological materials. Of these 18 materials, 14 are NBS Standard Reference Materials and four are IAEA reference materials. Overall, the results show that a mean of 52% of the input elements can be determined to a relative standard deviation of +/- 10% or better by reactor flux (thermal plus epithermal) INAA.

Determination of inorganic components in Brazilian medicinal plants by neutron activation analysis

Instrumental neutron activation analysis (INAA) has been applied to multielemental determinations of medicinal extracts obtained from the plants. Cordia Verbenacea DC, Folidago Microglossa DC, and Petiveria Alliacea. Concentrations of the elements Al, Br, Ca, Cl, Co, Cs, Fe, K, La, Mg, Mn, Na, Rb, Sb, and Zn have been determined in dried extracts of these herbs by short and long irradiations under a thermal neutron flux of 10(11)-10(13) n/cm2s in the IEA-R1 nuclear reactor. The NBS Tea Leaves (1572) and NIES Pepperbush (1) reference materials were analyzed simultaneously with the plant extracts. The results obtained in these analyses have shown a good accuracy and reproducibility of the method. The relative errors and the relative standard deviations were less than 10% for most of the elements analyzed.

Inductively coupled atomic emission spectrometry and neutron activation analysis for the determination of element reference values in human lung tissue

An investigation was undertaken in order to assess the performance of neutron activation analysis and inductively coupled plasma atomic emission spectrometry techniques for determining reference values for minor and trace elements in human lungs of urban subjects. Results show that in both instances experimental conditions must be carefully optimized to guarantee reliability of experimental data. Strict criteria for tissue sampling and pretreatment also had to be set. Provisional reference values for ca. 50 elements could thus be established.

Neutron activation analysis of biological samples with a preirradiation chemical separation

A preirradiation separation procedure has been developed to separate Al, Cu, Mn, and V from biological materials. Chelex-100 resin is used as the separation medium, and the resin is irradiated directly. Three NIST biological Standard Reference Materials and five samples of human blood serum, obtained under carefully controlled conditions, have been analyzed by NAA following this separation.

Homogeneity and evaluation of the new NIST leaf certified reference materials

The NIST has produced and is in the process of certifying two new leaf CRMs, SRM1515 Apple Leaves and SRM 1547 Peach Leaves, as replacements for the no longer available NBS Orchard Leaves and the almost depleted Citrus Leaves. These two new materials have been processed and are being thoroughly evaluated and should provide the most advanced natural matrix botanical trace-element reference materials available. Caution should be used in determining a basis weight (drying) for these CRMs because of their very fine particle size. Homogeneity has been established by instrumental neutron activation analysis on both leaf materials for five elements, to date, to better than 1.5% (1 s) for 100-mg sample sizes.

Determination of trace elements in standard reference materials by the ko-standardization method

The ko-standardization method is suitable for routine multielement determinations by reactor neutron activation analysis (NAA). Investigation of NIST standard reference materials SRM 1571 Orchard Leaves, SRM 1572 Citrus Leaves, and SRM 1573 Tomato Leaves showed the systematic error of 12 certified elements determined to be less than 8%. Thirty-four elements were determined in NIST proposed SRM 1515 Apple Leaves.

A new microcomputer-controlled neutron activation and analysis system. Description and applications for the analysis of bioenvironmental specimens

A microcomputer-controlled irradiation and measurement system and a microprocessor-controlled sample changer have been installed at the SLOWPOKE-2 Facility at the Royal Military College of Canada (RMC). These systems can provide the gamut of instrumental neutron activation analysis (INAA) techniques for the analyst. Custom software has been created for system control, data acquisition, and off-line spectral analysis using programs that incorporate Gaussian peak-fitting methods of analysis. The design and use of the equipment is discussed, and the performance is illustrated with results obtained from the analysis of marine sediment and biological reference materials.