Selective CW Laser Synthesis of MoS2 and Mixture of MoS2 and MoO2 from (NH4)2MoS4 Film

Very recently, the synthesis of 2D MoS2 and WS2 through pulsed laser-directed thermolysis can achieve wafer-scale and large-area structures, in ambient conditions. In this paper, we report the synthesis of MoS2 and MoS2 oxides from (NH4)2MoS4 film using a visible continuous-wave (CW) laser at 532 nm, instead of the infrared pulsed laser for the laser-directed thermolysis. The (NH4)2MoS4 film is prepared by dissolving its crystal powder in DI water, sonicating the solution, and dip-coating onto a glass slide. We observed a laser intensity threshold for the laser synthesis of MoS2, however, it occurred in a narrow laser intensity range. Above that range, a mixture of MoS2 and MoO2 is formed, which can be used for a memristor device, as demonstrated by other research groups. We did not observe a mixture of MoS2 and MoO3 in the laser thermolysis of (NH4)2MoS4. The laser synthesis of MoS2 in a line pattern is also achieved through laser scanning. Due to of the ease of CW beam steering and the fine control of laser intensities, this study can lead toward the CW laser-directed thermolysis of (NH4)2MoS4 film for the fast, non-vacuum, patternable, and wafer-scale synthesis of 2D MoS2.

Local Nanostrain Engineering of Monolayer MoS2 Using Atomic Force Microscopy-Based Thermomechanical Nanoindentation

Strain engineering in two-dimensional materials (2DMs) has important application potential for electronic and optoelectronic devices. However, achieving precise spatial control, adjustable sizing, and permanent strain with nanoscale resolution remains challenging. Herein, a thermomechanical nanoindentation method is introduced, inspired by skin edema caused by mosquito bites, which can induce localized nanostrain and bandgap modulation in monolayer molybdenum disulfide (MoS2) transferred onto a poly(methyl methacrylate) film utilizing a heated atomic force microscopy nanotip. Via adjustment of the machining parameters, the strains of MoS2 are manipulated, achieving an average strain of ≤2.6% on the ring-shaped expansion structure. The local bandgap of MoS2 is spatially modulated using three types of nanostructures. Among them, the nanopit has the largest range of bandgap regulation, with a substantial change of 56 meV. These findings demonstrate the capability of the proposed method to create controllable and reproducible nanostrains in 2DMs.

Engineering Cell Microenvironment Using Nanopattern-Derived Multicellular Spheroids and Photo-Crosslinked Gelatin/Hyaluronan Hydrogels

Cell cultures of dispersed cells within hydrogels depict the interaction of the cell-extracellular matrix (ECM) in 3D, while the coculture of different cells within spheroids combines both the effects of cell-cell and cell-ECM interactions. In this study, the cell co-spheroids of human bone mesenchymal stem cells/human umbilical vein endothelial cells (HBMSC/HUVECs) are prepared with the assistance of a nanopattern, named colloidal self-assembled patterns (cSAPs), which is superior to low-adhesion surfaces. A phenol-modified gelatin/hyaluronan (Gel-Ph/HA-Ph) hydrogel is used to encapsulate the multicellular spheroids and the constructs are photo-crosslinked using blue light. The results show that Gel-Ph/HA-Ph hydrogels with a 5%-to-0.3% ratio have the best properties. Cells in HBMSC/HUVEC co-spheroids are more favorable for osteogenic differentiation (Runx2, ALP, Col1a1 and OPN) and vascular network formation (CD31+ cells) compared to HBMSC spheroids. In a subcutaneous nude mouse model, the HBMSC/HUVEC co-spheroids showed better performance than HBMSC spheroids in angiogenesis and the development of blood vessels. Overall, this study paves a new way for using nanopatterns, cell coculturing and hydrogel technology for the generation and application of multicellular spheroids.

Top-Down Approaches for 10 nm-Scale Nanochannel: Toward Exceptional H2S Detection

Metal oxide semiconductors (MOS) have proven to be most powerful sensing materials to detect hydrogen sulfide (H₂S), achieving part per billion (ppb) level sensitivity and selectivity. However, there has not been a way of extending this approach to the top-down H₂S sensor fabrication process, completely limiting their commercial-level productions. In this study, we developed a top-down lithographic process of a 10 nm-scale SnO₂ nanochannel for H₂S sensor production. Due to high-resolution (15 nm thickness) and high aspect ratio (>20) structures, the nanochannel exhibited highly sensitive H₂S detection performances (R_a/R_g = 116.62, τ_res = 31 s at 0.5 ppm) with selectivity (R_H2S/R_acetone = 23 against 5 ppm acetone). In addition, we demonstrated that the nanochannel could be efficiently sensitized with the p-n heterojunction without any postmodification or an additional process during one-step lithography. As an example, we demonstrated that the H₂S sensor performance can be drastically enhanced with the NiO nanoheterojunction (R_a/R_g = 166.2, τ_res = 21 s at 0.5 ppm), showing the highest range of sensitivity demonstrated to date for state-of-the-art H₂S sensors. These results in total constitute a high-throughput fabrication platform to commercialize the H₂S sensor that can accelerate the development time and interface in real-life situations.

Nanopatterning of Perovskite Thin Films for Enhanced and Directional Light Emission

Lead-halide perovskites offer excellent properties for lighting and display applications. Nanopatterning perovskite films could enable perovskite-based devices with designer properties, increasing their performance and adding novel functionalities. We demonstrate the potential of nanopatterning for achieving light emission of a perovskite film into a specific angular range by introducing periodic sol-gel structures between the injection and emissive layer by using substrate conformal imprint lithography (SCIL). Structural and optical characterization reveals that the emission is funnelled into a well-defined angular range by optical resonances, while the emission wavelength and the structural properties of the perovskite film are preserved. The results demonstrate a flexible and scalable approach to the patterning of perovskite layers, paving the way toward perovskite LEDs with designer angular emission patterns.

Direct Patterning of Optoelectronic Nanostructures Using Encapsulated Layered Transition Metal Dichalcogenides

Direct top-down nanopatterning of semiconductors is a powerful tool for engineering properties of optoelectronic devices. Translating this approach to two-dimensional semiconductors such as monolayer transition metal dichalcogenides (TMDs) is challenging because of both the small scales required for confinement and the degradation of electronic and optical properties caused by high-energy and high-dose electron radiation used for high-resolution top-down direct electron beam patterning. We show that encapsulating a TMD monolayer with hexagonal boron nitride preserves the narrow exciton linewidths and emission intensity typical in such heterostructures after electron beam lithography, allowing direct patterning of functional optical monolayer nanostructures on scales of a few tens of nanometers. We leverage this fabrication method to study size-dependent effects on nanodot arrays of MoS2 and MoSe2 as well as laterally confined electrical transport devices, demonstrating the potential of top-down lithography for nanoscale TMD optoelectronics.

Nanotopography in directing osteogenic differentiation of mesenchymal stem cells: potency and future perspective

Severe bone injuries can result in disabilities and thus affect a person's quality of life. Mesenchymal stem cells (MSCs) can be an alternative for bone healing by growing them on nanopatterned substrates that provide mechanical signals for differentiation. This review aims to highlight the role of nanopatterns in directing or inducing MSC osteogenic differentiation, especially in bone tissue engineering. Nanopatterns can upregulate the expression of osteogenic markers, which indicates a faster differentiation process. Combined with growth factors, nanopatterns can further upregulate osteogenic markers, but with fewer growth factors needed, thereby reducing the risks and costs involved. Nanopatterns can be applied in scaffolds for tissue engineering for their lasting effects, even in vivo, thus having great potential for future bone treatment.

Effect of Highly Periodic Au Nanopatterns on Dendrite Suppression in Lithium Metal Batteries

Despite the extremely high energy density of the lithium metal, dendritic lithium growth caused by nonuniform lithium deposition can result in low Coulombic efficiency and safety hazards, thereby inhibiting its practical applications. Here, we report a new strategy for adopting a nanopatterned gold (Au) seed on a copper current collector for uniform lithium deposition. We find that Au nanopatterns enhance lithium metal battery performance, which is strongly affected by the feature dimensions of Au nanopatterns (diameter and height). Ex situ scanning electron microscopy images confirm that this can be attributed to the perfectly selective lithium nucleation and uniform growth resulting from the spatial confinement effect. The spatial arrangement of Au dot seeds homogenizes the Li⁺ flux and electric field, and the size-controlled Au seeds prevent both seed-/substrate-induced agglomeration and interseed-induced lithium growth, leading to uniform lithium deposition. This dendrite-free lithium deposition results in the improvement of electrochemical performance, and the system showed cyclic stability over 300 cycles at 0.5 mA cm^-2 and 200 cycles at 1.0 mA cm^-2 (1 mA h cm^-2) and a high rate capability. This study provides in-depth insights into the more complicated and diverse seed geometry control of seed materials for the development of high-performance lithium metal batteries.

In Vivo Antibacterial Efficacy of Nanopatterns on Titanium Implant Surface: A Systematic Review of the Literature

Background: Bionic surface nanopatterns of titanium (Ti) materials have excellent antibacterial effects in vitro for infection prevention. To date, there is a lack of knowledge about the in vivo bactericidal outcomes of the nanostructures on the Ti implant surfaces. Methods: A systematic review was performed using the PubMed, Embase, and Cochrane databases to better understand surface nanoscale patterns’ in vivo antibacterial efficacy. The inclusion criteria were preclinical studies (in vivo) reporting the antibacterial activity of nanopatterns on Ti implant surface. Ex vivo studies, studies not evaluating the antibacterial activity of nanopatterns or surfaces not modified with nanopatterns were excluded. Results: A total of five peer-reviewed articles met the inclusion criteria. The included studies suggest that the in vivo antibacterial efficacy of the nanopatterns on Ti implants’ surfaces seems poor. Conclusions: Given the small number of literature results, the variability in experimental designs, and the lack of reporting across studies, concluding the in vivo antibacterial effectiveness of nanopatterns on Ti substrates’ surfaces remains a big challenge. Surface coatings using metallic or antibiotic elements are still practical approaches for this purpose. High-quality preclinical data are still needed to investigate the in vivo antibacterial effects of the nanopatterns on the implant surface.

Optimizing the Aspect Ratio of Nanopatterned Mesoporous TiO2 Thin-Film Layer to Improve Energy Conversion Efficiency of Perovskite Solar Cells

The energy conversion efficiency (ECE) (η), current density (J_sc), open-circuit voltage (V_oc), and fill factor (ff) of perovskite solar cells were studied by using the transmittance of a nanopatterned mesoporous TiO₂ (mp-TiO₂) thin-film layer. To improve the ECE of perovskite solar cells, a mp-TiO₂ thin-film layer was prepared to be used as an electron transport layer (ETL) via the nanoimprinting method for nanopatterning, which was controlled by the aspect ratio. The nanopatterned mp-TiO₂ thin-film layer had a uniform and well-designed structure, and the diameter of nanopatterning was 280 nm. The aspect ratio was controlled at the depths of 75, 97, 127, and 167 nm, and the perovskite solar cell was fabricated with different depths. The ECE of the perovskite solar cells with the nanopatterned mp-TiO₂ thin-film layer was 14.50%, 15.30%, 15.83%, or 14.24%, which is higher than that of a non-nanopatterned mp-TiO₂ thin-film layer (14.07%). The enhancement of ECE was attributed to the transmittance of the nanopatterned mp-TiO₂ thin-film layer that is due to the improvement of the electron generation. As a result, better electron generation affected the electron density, and J_sc increased the V_oc, and ff of perovskite solar cells.

Oxygen Plasma Substrate and Specific Nanopattern Promote Early Differentiation of HepaRG Progenitors

Fully differentiated HepaRG™ cells are the hepatic cell line of choice for in vitro study in toxicology and drug trials. They are derived from a hepatoblast-like progenitor (HepaRG-P) that differentiates into a coculture of hepatocyte-like and cholangiocyte-like cells. This process that requires 2 weeks of proliferation followed by 2 weeks of differentiation using dimethyl sulfoxide (DMSO) can be time consuming and costly. Identifying a method to accelerate HepaRG-Ps toward a mature lineage would save both time and money. The ability to do this in the absence of DMSO would remove the possibility of confounding toxicology results caused by DMSO induction of CYP pathways. It has been shown that tissue culture substrates play an important role in the development and maturity of a cell line, and this is particularly important for progenitor cells, which retain some form of plasticity. Oxygen plasma treatment is used extensively to modify cell culture substrates. There is also evidence that patterned rather than planar surfaces have a positive effect on proliferation and differentiation. In this study, we compared the effect of standard tissue culture plastic (TCP), oxygen plasma coated (OPC), and nanopatterned substrates (NPS) on early differentiation and function of HepaRG-P cells. Since NPS were OPC we initially compared the effect of TCP and OPC to enable comparison between all three culture surfaces using OPC as control to asses if patterning further enhanced early differentiation and functionality. The results show that HepaRG-P's grown on OPC substrate exhibited earlier differentiation, proliferation, and function compared with TCP. Culturing HepaRG-P's on OPC with the addition of NPS did not confer any additional advantage. In conclusion, OPC surface appeared to enhance hepatic differentiation and functionality and could replace traditional methods of differentiating HepaRG-P cells into fully differentiated and functional HepaRGs earlier than standard methods. Impact statement We show significantly earlier differentiation and function of HepaRG progenitor cells when grown in dimethyl sulfoxide-free medium on oxygen plasma substrates versus standard tissue culture plastic. Further investigation showed that nanopatterning of oxygen plasma substrates did not confer any additional advantage over smooth oxygen plasma, although one pattern (DSQ120) showed comparable early differentiation and function.

Manipulating Mesenchymal Stem Cell Differentiation on Nanopattern Constructed through Cell-Mediated Mineralization

The extracellular matrix microenvironment, including chemical constituents and topological structure, plays key role in regulating the cell behavior, such as adhesion, proliferation, differentiation, apoptosis, etc. Until now, to investigate the relationship between surface texture and cell response, various ordered patterns have been prepared on the surface of different matrixes, whereas almost all these strategies depend on advanced instruments or severe synthesis conditions. Herein, cell-mediated mineralization method has been applied to construct nanopattern on the surface of β-TCP scaffold. The formation process, morphology, and composition of the final pattern were characterized, and a possible mineralization mechanism has been proposed. Moreover, the cell behavior on the nanopattern has been investigated, and the results showed that the mouse bone marrow mesenchyme stem cells (mBMSCs) display good affinity with the nanopattern, which was manifested by the good proliferation and osteogenic differentiation status of cells. The synthetic strategy may shed light to construct advanced topological structures on other matrixes for bone repair.

Simulation Approach for Hydrophobicity Replication via Injection Molding

Nanopattern replication of complex structures by plastic injection is a challenge that requires simulations to define the right processing parameters. Previous work managed to simulate replication for single cavities in 2D and 3D, showing high performance requirements of CPU to simulate periodic trenches in 2D. This paper presents two ways to approach the simulation of replication of complex 3D hydrophobic surfaces. The first approach is based on previous CFD Ansys Fluent and compared to FE based CFD Polyflow software for the analysis of laminar flows typical in polymer processing and glass forming as well as other applications. The results showed that Polyflow was able to reduce computing time from 72 h to only 5 min as desired in the project. Furthermore, simulations carried out with Polyflow showed that higher injection and mold temperature lead to better replication of hydrophobicity in agreement with the experiments. Polyflow simulations are proved to be a good tool to define process parameters such as temperature and cycle times for nanopattern replication.

Establishment of a Nanopatterned Renal Disease Model by Mimicking the Physical and Chemical Cues of a Diseased Mesangial Cell Microenvironment

Modulation of mesangial cell (MC) response by in vitro disease models offers therapeutic strategies for the treatment of several glomerular diseases. However, traditional cell culture models lack the nanostructured extracellular matrix (ECM), which has unique physical and chemical properties, so they poorly reflect the complexities of the native microenvironment. Therefore, a cell disease model with ECM nanostructures is required to better mimic the in vivo diseased nanoenvironment. To establish a renal disease model, we used a titanium dioxide-based disease-mimic nanopattern as the physical cues and transforming growth factor-beta 1 (TGF-β1) as a chemical cue. The effects of this renal disease model on proliferation and mesangial matrix (MM) component changes in the SV40MES13 (MES13) mouse mesangial cell line were evaluated. Our results showed that both the presence of the disease-mimic nanopattern and TGF-β1 intensified proliferation and resulted in increased type I collagen and fibronectin and decreased type IV collagen expressions in MES13 cells. These effects could be involved in increased TGF-β type I receptor expression in MES13 cells. The intracellular reactive oxygen species (ROS) level as a biomarker of this renal disease model indicated that the cells were in a diseased state. A small molecule A83-01 and known drug dexamethasone markedly attenuated the intracellular ROS production in MES13 that was induced by the disease-mimic nanopattern and TGF-β1. These results highlight the significant effects of physical and chemical cues in facilitating disease-like behavior in MES13 cells, providing an important theoretical basis for developing a drug screening platform for glomerular diseases.

Friction Control by Deformation Mode in Nanopatterned Amorphous Carbon

Traditionally, the manipulation of contact mechanisms has been adopted as the primary strategy to tailor the friction properties of surfaces. On the contrary, the detaching process involving the local deformation and failure at the interface has been considered relatively less important. Here, we present a new approach toward the friction control of amorphous carbon through the plasticity and resultant transition of deformation mode on nanopatterned surfaces. Depending on the topography of the nanopatterns, the mechanical responses of the surfaces alter from elastic fracture to plastic flow, through which the friction coefficient changes by a factor of 5 without manipulation of the intrinsic structure of the material.

System for Fabrication of Large-Area Roll Molds by Step-and-Repeat Liquid Transfer Imprint Lithography

The effective production of nanopatterned films generally requires a nanopatterned roll mold with a large area. We report on a novel system to fabricate large-area roll molds by recombination of smaller patterned areas in a step-and-repeat imprint lithography process. The process is accomplished in a method similar to liquid transfer imprint lithography (LTIL). The stamp roll with a smaller area takes up the liquid resist by splitting from a donor substrate or a donor roll. The resist is then transferred from a stamp roll to an acceptor roll and stitched together in a longitudinal and, if necessary, in a circumferential direction. During transfer, the nanostructured resist is UV-exposed and crosslinked directly on the acceptor roll. The acceptor roll with the stitched and recombined stamp patterns is ready to be used as a large-area roll mold for roll-based imprinting. A system for this purpose was designed, and its operation was demonstrated taking the example of an acceptor roll of 1 m length and 250 mm diameter, which was covered by 56 patterned areas. Such a system represents an elegant and efficient tool to recombine small patterned areas directly on a large roll mold and opens the way for large-area roll-based processing.

Adhesive-Layer-Free and Double-Faced Nanotransfer Lithography for a Flexible Large-Area MetaSurface Hologram

Herein, we develop an adhesive-free double-faced nanotransfer lithography (ADNT) technique based on the surface deformation of flexible substrates under the conditions of temperature and pressure control and thus address the challenge of realizing the mass production of large-area nanodevices in the fields of optics, metasurfaces, and holograms. During ADNT, which is conducted on a flexible polymer substrate above its glass transition temperature in the absence of adhesive materials and chemical bonding agents, nanostructures from the polymer stamp are attached to the deformed polymer substrate. Various silicon masters are employed to prove our method applicable to arbitrary nanopatterns, and diverse Ag and Au nanostructures are deposited on polymer molds to demonstrate the wide scope of useable metals. Finally, ADNT is used to (i) produce a flexible large-area hologram on the defect-free poly(methyl methacrylate) (PMMA) film and (ii) fabricate a metasurface hologram and a color filter on the front and back surfaces of the PMMA film, respectively, to realize dual functionality. Thus, it is concluded that the use of ADNT can decrease the fabrication time and cost of high-density nanodevices and facilitate their commercialization.

Matrix Nanopatterning Regulates Mesenchymal Differentiation through Focal Adhesion Size and Distribution According to Cell Fate

Extracellular matrix remodeling plays a pivotal role during mesenchyme patterning into different lineages. Tension exerted from cell membrane receptors bound to extracellular matrix ligands is transmitted by the cytoskeleton to the cell nucleus inducing gene expression. Here, we used dendrimer-based arginine–glycine–aspartic acid (RGD) uneven nanopatterns, which allow the control of local surface adhesiveness at the nanoscale, to unveil the adhesive requirements of mesenchymal tenogenic and osteogenic commitments. Cell response was found to depend on the tension resulting from cell–substrate interactions, which affects nuclear morphology and is regulated by focal adhesion size and distribution.

Large-Area Biomolecule Nanopatterns on Diblock Copolymer Surfaces for Cell Adhesion Studies

Cell membrane receptors bind to extracellular ligands, triggering intracellular signal transduction pathways that result in specific cell function. Some receptors require to be associated forming clusters for effective signaling. Increasing evidences suggest that receptor clustering is subjected to spatially controlled ligand distribution at the nanoscale. Herein we present a method to produce in an easy, straightforward process, nanopatterns of biomolecular ligands to study ligand⁻receptor processes involving multivalent interactions. We based our platform in self-assembled diblock copolymers composed of poly(styrene) (PS) and poly(methyl methacrylate) (PMMA) that form PMMA nanodomains in a closed-packed hexagonal arrangement. Upon PMMA selective functionalization, biomolecular nanopatterns over large areas are produced. Nanopattern size and spacing can be controlled by the composition of the block-copolymer selected. Nanopatterns of cell adhesive peptides of different size and spacing were produced, and their impact in integrin receptor clustering and the formation of cell focal adhesions was studied. Cells on ligand nanopatterns showed an increased number of focal contacts, which were, in turn, more matured than those found in cells cultured on randomly presenting ligands. These findings suggest that our methodology is a suitable, versatile tool to study and control receptor clustering signaling and downstream cell behavior through a surface-based ligand patterning technique.

Facile and Scalable Fabrication of Flexible Reattachable Ionomer Nanopatterns by Continuous Multidimensional Nanoinscribing and Low-temperature Roll Imprinting

We develop a facile route to the scalable fabrication of flexible reattachable ionomer nanopatterns (RAINs) by continuous nanoinscribing and low-temperature roll imprinting, which are repeatedly attachable to and detachable from arbitrarily shaped surfaces. First, by sequentially performing continuous nanoinscribing over a polymer substrate along the multiple directions, we readily create the multidimensional nanopattern, which otherwise demands complex nanofabrication. After its transfer to an elastomer pad for use as a soft nanoimprinting stamp, we then conduct a low-temperature roll imprinting of the ionomer film to fabricate a flexible and highly transparent RAIN. Reversible loosening of ionic units in the ionomer material at the mild temperature as low as ∼60-70 °C enables the faithful nanopatterning over thermosensitive organic compounds and fragile materials under a slight pressure. The excellent adhesion purely emerging from ionic interactions uniquely realizes the conformal attachability and clean detachability of RAINs for universal targets in ambient conditions, particularly beneficial for individual wearable and mobile devices requiring the user-specific "on/off" of the nanopattern-driven functionalities. As one vivid example, we demonstrate that a single light-emitting device can be switched from the focused pointer to the widespread flashlight depending on the RAIN application upon user's purpose.

Atomic force acoustic microscopy reveals the influence of substrate stiffness and topography on cell behavior

The stiffness and the topography of the substrate at the cell-substrate interface are two key properties influencing cell behavior. In this paper, atomic force acoustic microscopy (AFAM) is used to investigate the influence of substrate stiffness and substrate topography on the responses of L929 fibroblasts. This combined nondestructive technique is able to characterize materials at high lateral resolution. To produce substrates of tunable stiffness and topography, we imprint nanostripe patterns on undeveloped and developed SU-8 photoresist films using electron-beam lithography (EBL). Elastic deformations of the substrate surfaces and the cells are revealed by AFAM. Our results show that AFAM is capable of imaging surface elastic deformations. By immunofluorescence experiments, we find that the L929 cells significantly elongate on the patterned stiffness substrate, whereas the elasticity of the pattern has only little effect on the spreading of the L929 cells. The influence of the topography pattern on the cell alignment and morphology is even more pronounced leading to an arrangement of the cells along the nanostripe pattern. Our method is useful for the quantitative characterization of cell-substrate interactions and provides guidance for the tissue regeneration therapy in biomedicine.

Selective Functionalization of High-Resolution Cu₂O Nanopatterns via Galvanic Replacement for Highly Enhanced Gas Sensing Performance

Recently, high-resolution patterned metal oxide semiconductors (MOS) have gained considerable attention for enhanced gas sensing performance due to their polycrystalline nature, ultrasmall grain size (~5 nm), patternable properties, and high surface-to-volume ratio. Herein, we significantly enhanced the sensing performance of that patterned MOS by galvanic replacement, which allows for selective functionalization on ultrathin Cu₂O nanopatterns. Based on the reduction potential energy difference between the base channel material (Cu₂O) and the decorated metal ion (Pt²⁺), Pt could be selectively and precisely decorated onto the desired area of the Cu₂O nanochannel array. Overall, the Pt-decorated Cu₂O exhibited 11-fold higher NO₂ (100 ppm) sensing sensitivity as compared to the non-decorated sensing channel, the while the channel device with excessive Pt doping showed complete loss of sensing properties.

Halide Perovskite Nanopillar Photodetector

Numerous studies have reported the use of halide perovskites as highly functional light-harvesting materials. The development of optimized compositions and deposition approaches has led to impressive improvements; however, no noticeable breakthrough in performance has been observed for these materials recently. Here, a breakthrough that enables the fabrication of vertically grown halide perovskite (VGHP) nanopillar photodetectors via a nanoimprinting crystallization technique is demonstrated. We used engraved nanopatterned polymer stamps to form VGHP nanopillars during the pressurized crystallization of the softly baked gel state of a methylammonium lead iodide (CH₃NH₃PbI₃, denoted MAPI) film. The VGHP films exhibit much lower defect density and higher conductivity, as supported by current-voltage characteristic measurements and conductive atomic force microscopy measurements. Ultimately, two-terminal lateral photodetectors based on the VGHP nanopillar films show a greatly enhanced photoresponse compared with flat film-based photodetectors. We expect that the deposition method presented here will help surpass the technical limits and contribute to further improvements in various halide-perovskite-based devices.

Mechanochemical Effects on Extracellular Signal-Regulated Kinase Dynamics in Stem Cell Differentiation

Understanding how key signaling molecules are coregulated by biochemical agents and physical stimuli during stem cell differentiation is critical but often lacking. Due to the important role of extracellular signal-regulated kinase (ERK), this study has examined its temporal dynamics to determine the coregulation of mechanochemical cues on ERK phosphorylation for smooth muscle cell (SMC) differentiation. To assess ERK1/2 activity, a fluorescence resonance energy transfer-based biosensor was transfected into mesenchymal stem cells. The influences of nanopatterned substrates, growth factors, and drugs on ERK activities were related to their effects on SMC differentiation. Results revealed that nanopatterned substrates significantly increased ERK activity in cells, overriding ERK response from administered biochemical factors. The nanopatterned substrates reduced expression of SMC markers after a 48-h biochemical treatment, except for the combination with ERK inhibitor PD98059 treatment, which enhanced expression of mature SMC marker MYH11. Immunofluorescent staining for focal adhesion proteins, vinculin and zyxin, indicated no significant differences in vinculin cluster distribution or dimension, while the location of zyxin changed from adhesion sites of cell periphery on nonpatterned substrate to actin filaments on nanopatterned substrate. The zyxin-reinforced stress fibers likely enhanced the cytoskeletal tension to increase ERK dynamics. Collectively, results suggest that physical stimuli play a dominating role in initial ERK signaling and early-stage differentiation through focal adhesion changes, and the capability of monitoring signaling events in real time could be exploited to guide the engineering of cell microenvironment.

Dendrimer-based Uneven Nanopatterns to Locally Control Surface Adhesiveness: A Method to Direct Chondrogenic Differentiation

Cellular adhesion and differentiation is conditioned by the nanoscale disposition of the extracellular matrix (ECM) components, with local concentrations having a major effect. Here we present a method to obtain large-scale uneven nanopatterns of arginine-glycine-aspartic acid (RGD)-functionalized dendrimers that permit the nanoscale control of local RGD surface density. Nanopatterns are formed by surface adsorption of dendrimers from solutions at different initial concentrations and are characterized by water contact angle (CA), X-ray photoelectron spectroscopy (XPS), and scanning probe microscopy techniques such as scanning tunneling microscopy (STM) and atomic force microscopy (AFM). The local surface density of RGD is measured using AFM images by means of probability contour maps of minimum interparticle distances and then correlated with cell adhesion response and differentiation. The nanopatterning method presented here is a simple procedure that can be scaled up in a straightforward manner to large surface areas. It is thus fully compatible with cell culture protocols and can be applied to other ligands that exert concentration-dependent effects on cells.

Carbon Nanotube Embedded Nanostructure for Biometrics

Low electric energy loss is a very important problem to minimize the decay of transferred energy intensity due to impedance mismatch. This issue has been dealt with by adding an impedance matching layer at the interface between two media. A strategy was proposed to improve the charge transfer from the human body to a biometric device by using an impedance matching nanostructure. Nanocomposite pattern arrays were fabricated with shape memory polymer and carbon nanotubes. The shape recovery ability of the nanopatterns enhanced durability and sustainability of the structure. It was found that the composite nanopatterns improved the current transfer by two times compared with the nonpatterned composite sample. The underlying mechanism of the enhanced charge transport was understood by carrying out a numerical simulation. We anticipate that this study can provide a new pathway for developing advanced biometric devices with high sensitivity to biological information.

Reaction Mechanism of Area-Selective Atomic Layer Deposition for Al2O3 Nanopatterns

The reaction mechanism of area-selective atomic layer deposition (AS-ALD) of Al₂O₃ thin films using self-assembled monolayers (SAMs) was systematically investigated by theoretical and experimental studies. Trimethylaluminum (TMA) and H₂O were used as the precursor and oxidant, respectively, with octadecylphosphonic acid (ODPA) as an SAM to block Al₂O₃ film formation. However, Al₂O₃ layers began to form on the ODPA SAMs after several cycles, despite reports that CH₃-terminated SAMs cannot react with TMA. We showed that TMA does not react chemically with the SAM but is physically adsorbed, acting as a nucleation site for Al₂O₃ film growth. Moreover, the amount of physisorbed TMA was affected by the partial pressure. By controlling it, we developed a new AS-ALD Al₂O₃ process with high selectivity, which produces films of ∼60 nm thickness over 370 cycles. The successful deposition of Al₂O₃ thin film patterns using this process is a breakthrough technique in the field of nanotechnology.

Nanopatterned Adhesive, Stretchable Hydrogel to Control Ligand Spacing and Regulate Cell Spreading and Migration

Spatial molecular patterning enables the regulation of adhesion receptor clustering and can thus play a pivotal role in multiple biological activities such as cell adhesion, viability, proliferation, and differentiation. A wide range of nanopatterned, adhesive interfaces have been designed to decipher the essence of molecular-scale interactions between cells and the adhesive interface. Although an interligand spacing of less than 70 nm is a proven prerequisite for the formation of stable focal adhesions, there is a paucity of data concerning how cells behave on substrates featuring heterogeneous adhesiveness. In this study, a stretchable hydrogel functionalized with a quasi-hexagonally arranged nanoarray was stretched along one direction, resulting in ligands periodically arranged in a pattern resembling a centered rectangular lattice with an interligand spacing smaller than 70 nm in one direction and greater than 70 nm in the orthogonal direction. This substrate was utilized to modulate interligand spacing and investigate cell adhesion and migration. An interligand spacing larger than 70 nm-even in just one direction-prevented the establishment of stable focal adhesions. The stretched interface promoted dynamic remodeling at cell contacts, resulting in higher cellular mobility. Our nanopatterned stretchable hydrogel permits reversible control over cell adhesion and migration on nanopatterned ligand interfaces.

Formation of Nanogrooves with Sub-5 nm Periodicity Using Local Silicification at the Interspace between a Si Substrate and Lyotropic Liquid Crystals

Bottom-up fabrication of nanopatterns with single nanometer-scale periodicity is quite challenging. In this study, we have focused on the use of the outermost convex surfaces of lyotropic liquid crystals (LLCs) as a template. Periodically arrayed single nanometer-scale nanogrooves consisting of silica are successfully formed on a Si substrate covered with LLCs composed of cylindrical micelles of cetyltrimethylammonium chloride. Soluble silicate species are generated from the Si substrate by a treatment with an NH₃-water vapor mixture, infilling the interspaces between the Si substrate and the LLCs. The cross section of the nanogrooves has a symmetrical sawtooth-like profile with a periodicity of 4.7 nm, and the depth of each nanogroove is around 2 nm. Uniaxial alignment of the nanogrooves can be achieved using micrometer-scale grooves fabricated by a focused ion beam technique. Although formed nanogrooves contain defects, such as bends and discontinuities, this successful concept provides a novel fabrication method of arrayed concave patterns with sub-5 nm periodicity on the surfaces of Si substrates.

Preferential Alignment of Incommensurate Block Copolymer Dot Arrays Forming Moiré Superstructures

Block copolymer (BCP) self-assembly is of great interest as a cost-effective method for large-scale, high-resolution nanopattern fabrication. Directed self-assembly can induce long-range order and registration, reduce defect density, and enable access to patterns of higher complexity. Here we demonstrate preferential orientation of two incommensurate BCP dot arrays. A bottom layer of hexagonal silica dots is prepared via typical self-assembly from a PS-b-PDMS block copolymer. Self-assembly of a second, or top, layer of a different PS-b-PDMS block copolymer that forms a hexagonal dot pattern with different periodicity results in a predictable moiré superstructure. Four distinct moiré superstructures were demonstrated through a combination of different BCPs and different order of annealing. The registration force of the bottom layer of hexagonal dots is sufficient to direct the self-assembly of the top layer to adopt a preferred relative angle of rotation. Large-area helium ion microscopy imaging enabled quantification of the distributions of relative rotations between the two lattices in the moiré superstructures, yielding statistically meaningful results for each combination. It was also found that if the bottom layer dots were too large, the resulting moiré pattern was lost. A small reduction in the bottom layer dot size, however, resulted in large-area moiré superstructures, suggesting a specific size regime where interlayer registration forces can induce long-range preferential alignment of incommensurate BCP dot arrays.

High-Resolution p-Type Metal Oxide Semiconductor Nanowire Array as an Ultrasensitive Sensor for Volatile Organic Compounds

The development of high-performance volatile organic compound (VOC) sensor based on a p-type metal oxide semiconductor (MOS) is one of the important topics in gas sensor research because of its unique sensing characteristics, namely, rapid recovery kinetics, low temperature dependence, high humidity or thermal stability, and high potential for p-n junction applications. Despite intensive efforts made in this area, the applications of such sensors are hindered because of drawbacks related to the low sensitivity and slow response or long recovery time of p-type MOSs. In this study, the VOC sensing performance of a p-type MOS was significantly enhanced by forming a patterned p-type polycrystalline MOS with an ultrathin, high-aspect-ratio (∼25) structure (∼14 nm thickness) composed of ultrasmall grains (∼5 nm size). A high-resolution polycrystalline p-type MOS nanowire array with a grain size of ∼5 nm was fabricated by secondary sputtering via Ar(+) bombardment. Various p-type nanowire arrays of CuO, NiO, and Cr2O3 were easily fabricated by simply changing the sputtering material. The VOC sensor thus fabricated exhibited higher sensitivity (ΔR/Ra = 30 at 1 ppm hexane using NiO channels), as well as faster response or shorter recovery time (∼30 s) than that of previously reported p-type MOS sensors. This result is attributed to the high resolution and small grain size of p-type MOSs, which lead to overlap of fully charged zones; as a result, electrical properties are predominantly determined by surface states. Our new approach may be used as a route for producing high-resolution MOSs with particle sizes of ∼5 nm within a highly ordered, tall nanowire array structure.

Mechanistic Study for Facile Electrochemical Patterning of Surfaces with Metal Oxides

Reactive interface patterning promoted by lithographic electrochemistry serves as a method for generating submicrometer scale structures. We use a binary-potential step on a metallic overlayer on silicon to fabricate radial patterns of cobalt oxide on the nanoscale. The mechanism for pattern formation has heretofore been ill-defined. The binary potential step allows the electrochemical boundary conditions to be controlled such that initial conditions for a scaling analysis are afforded. With the use of the scaling analysis, a mechanism for producing the observed pattern geometry is correlated to the sequence of electrochemical steps involved in the formation of the submicrometer structures. The patterning method is facile and adds to electrochemical micromachining techniques employing a silicon substrate.

Podosome Formation and Development in Monocytes Restricted by the Nanoscale Spatial Distribution of ICAM1

We studied podosome formation and development in activated monocytes (THP1) at ICAM1 (intercellular adhesion molecule 1) nanopatterns of circular and ring-shaped domains and show that cellular binding to a preclustered ICAM1 nanopattern requires ligand patches of at least 200 nm (corresponding to 14 or more integrins). Podosome-like adhesion formation depends on the structure of the ligand pattern under the developing podosome with larger single domains promoting adhesion in a single patch and multiple smaller domains allowing podosome formation by integration of at least 2 smaller domains on either side of the podosome core. Maturation to rosette structures and recruitment of proteases were only observed with macroscopic ICAM1 presentation.

Combined Chemical Groups and Topographical Nanopattern on the Poly(ε-Caprolactone) Surface for Regulating Human Foreskin Fibroblasts Behavior

Surface chemistry and substrate topography could contribute significantly to providing a biochemical and topographical cues for governing the fate of cells on the cell-material interface. However, the synergies between these two properties have not been exploited extensively for biomaterial design. Herein, we achieved spatial-controlled patterning of chemical groups on the poly(ε-caprolactone) (PCL) surface by elegant UV-nanoimprint lithography (UN-NIL). The introduction of chemical groups on the PCL surface was developed by our newly 6-benzyloxycarbonylmethyl-ε-caprolactone (BCL) monomer, which not only solved the lack of functional groups along the PCL chain but also retained the original favorable properties of PCL materials. The synergetic effect of the chemical groups and nanopatterns on the human foreskin fibroblasts (HFFs) behaviors was evaluated in detail. The results revealed that the patterned functional PCL surfaces could induce enhanced cell adhesion and proliferation, further trigger changes in HFFs morphology, orientation and collagen secretion. Taken together, this study provided a method for straightforward fabrication of reactive PCL surfaces with topographic patterns by one-step process, and they would facilitate PCL as potential candidate for cell cultivation and tissue engineering.

Protein Adsorption on Chemically Modified Block Copolymer Nanodomains: Influence of Charge and Flow

Understanding the interactions of biomacromolecules with nanoengineered surfaces is vital for assessing material biocompatibility. This study focuses on the dynamics of protein adsorption on nanopatterned block copolymers (BCPs). Poly(styrene)-block-poly(1,2-butadiene) BCPs functionalized with an acid, amine, amide, or captopril moieties were processed to produce nanopatterned films. These films were characterized using water contact angle measurements and atomic force microscopy in air and liquid to determine how the modification process affected. wettability and swelling. Protein adsorption experiments were conducted under static and dynamic conditions via a quartz crystal microbalance with dissipation. Proteins of various size, charge, and stability were investigated to determine whether their physical characteristics affected adsorption. Significantly decreased contact angles were caused by selective swelling of modified BCP domains. The results indicate that nanopatterned chemistry and experimental conditions strongly impact adsorption dynamics. Depending on the structural stability of the protein, polyelectrolyte surfaces significantly increased adsorption over controls. Further analysis suggested that protein stability may correlate with dissipation versus frequency plots.

Highly Enhanced Fluorescence Signals of Quantum Dot-Polymer Composite Arrays Formed by Hybridization of Ultrathin Plasmonic Au Nanowalls

Enhancement of the fluorescence intensity of quantum dot (QD)-polymer nanocomposite arrays is an important issue in QD studies because of the significant reduction of fluorescence signals of such arrays due to nonradiative processes in densely packed polymer chains in solid films. In this study, we enhance the fluorescence intensity of such arrays without significantly reducing their optical transparency. Enhanced fluorescence is achieved by hybridizing ultrathin plasmonic Au nanowalls onto the sidewalls of the arrays via single-step patterning and hybridization. The plasmonic Au nanowall induces metal-enhanced fluorescence, resulting in a maximum 7-fold enhancement of the fluorescence signals. We also prepare QD nanostructures of various shapes and sizes by controlling the dry etching time. In the near future, this facile approach can be used for fluorescence enhancement of colloidal QDs with plasmonic hybrid structures. Such structures can be used as optical substrates for imaging applications and for fabrication of QD-LED devices.

Differentiation of Normal and Cancer Cell Adhesion on Custom Designed Protein Nanopatterns

Cell adhesion to the extracellular matrix is deregulated in metastasis. However, traditional surfaces used to study cell adhesion do not faithfully mimic the in vivo microenvironment. Electron beam lithography (EBL) is able to generate customized protein nanopatterns. Here, we used an EBL-based green lithography approach to fabricate homogeneous and gradient, single (fibronectin, K-casein) and double (fibronectin, laminin) active component protein nanopatterns with micrometer scale spacing to investigate differences in adhesion of breast cancer cells (BCC) and normal mammary epithelial cells (NMEC). Our results showed that as expected, in contrast to NMEC, BCC were plastic: they tolerated nonadhesion promoting regions, adapted to flow and exploited gradients better. In addition, the number of focal adhesions but not their area appeared to be the dominant parameter for regulation of cell adhesion. Our findings also demonstrated that custom designed protein nanopatterns, which can properly mimic the in vivo microenvironment, enable realistic distinction of normal and cancerous cell adhesion.

Matrix Stiffness and Nanoscale Spatial Organization of Cell-Adhesive Ligands Direct Stem Cell Fate

One of the breakthroughs in biomaterials and regenerative medicine in the latest decade is the finding that matrix stiffness affords a crucial physical cue of stem cell differentiation. This statement was recently challenged by another understanding that protein tethering on material surfaces instead of matrix stiffness was the essential cue to regulate stem cells. Herein, we employed nonfouling poly(ethylene glycol) (PEG) hydrogels as the matrix to prevent nonspecific protein adsorption, and meanwhile covalently bound cell-adhesive arginine-glycine-aspartate (RGD) peptides onto the hydrogel surfaces in the form of well-defined nanoarrays to control specific cell adhesion. This approach enables the decoupling of the effects of matrix stiffness and surface chemistry. Mesenchymal stem cells (MSCs) were cultured on four substrates (two compressive moduli of the PEG hydrogels multiplied by two RGD nanospacings) and incubated in the mixed osteogenic and adipogenic medium. The results illustrate unambiguously that matrix stiffness is a potent regulator of stem cell differentiation. Moreover, we reveal that RGD nanospacing affects spreading area and differentiation of rat MSCs, regardless of the hydrogel stiffness. Therefore, both matrix stiffness and nanoscale spatial organization of cell-adhesive ligands direct stem cell fate.

Single-Step Soft-Imprinted Large-Area Nanopatterned Antireflection Coating

We demonstrate an effective nanopatterned antireflection coating on glass that is based on sol-gel chemistry and large-area substrate-conformal soft-imprint technology. The printed 120 nm tall silica nanocylinders with a diameter of 245 nm in a square array with 325 nm pitch form an effective-index (n = 1.20) antireflection coating that reduces the double-sided reflection from a borosilicate glass slide from 7.35% to 0.57% (averaged over the visible spectral range) with a minimum reflectance <0.05% at 590 nm. The nanoglass coating is made using a simple process involving only spin-coating and an imprint step, without vacuum technology or annealing required. The refractive index of the nanoglass layers can be tailored over a broad range by controlling the geometry (1.002 < n < 1.44 in theory), covering a wide range that is not achievable with natural materials. We demonstrate that the nanoglass coating effectively eliminates glare from smart-phone display windows and significantly improves the efficiency of glass-encapsulated solar cells. These features, that are achieved over an angular range as wide as ±50°, together with strong hydrophobicity and mechanical durability, make nanoglass coatings a promising technology to improve the functionality of optoelectronic devices based on glass encapsulation.

High-throughput patterning of photonic structures with tunable periodicity

A patterning method termed "RIPPLE" (reactive interface patterning promoted by lithographic electrochemistry) is applied to the fabrication of arrays of dielectric and metallic optical elements. This method uses cyclic voltammetry to impart patterns onto the working electrode of a standard three-electrode electrochemical setup. Using this technique and a template stripping process, periodic arrays of Ag circular Bragg gratings are patterned in a high-throughput fashion over large substrate areas. By varying the scan rate of the cyclically applied voltage ramps, the periodicity of the gratings can be tuned in situ over micrometer and submicrometer length scales. Characterization of the periodic arrays of periodic gratings identified point-like and annular scattering modes at different planes above the structured surface. Facile, reliable, and rapid patterning techniques like RIPPLE may enable the high-throughput and low-cost fabrication of photonic elements and metasurfaces for energy conversion and sensing applications.

Nanoengineered surfaces for focal adhesion guidance trigger mesenchymal stem cell self-organization and tenogenesis

The initial conditions for morphogenesis trigger a cascade of events that ultimately dictate structure and functions of tissues and organs. Here we report that surface nanopatterning can control the initial assembly of focal adhesions, hence guiding human mesenchymal stem cells (hMSCs) through the process of self-organization and differentiation. This process self-sustains, leading to the development of macroscopic tissues with molecular profiles and microarchitecture reminiscent of embryonic tendons. Therefore, material surfaces can be in principle engineered to set off the hMSC program toward tissuegenesis in a deterministic manner by providing adequate sets of initial environmental conditions.

Nanoscale plasmonic stamp lithography on silicon

Nanoscale lithography on silicon is of interest for applications ranging from computer chip design to tissue interfacing. Block copolymer-based self-assembly, also called directed self-assembly (DSA) within the semiconductor industry, can produce a variety of complex nanopatterns on silicon, but these polymeric films typically require transformation into functional materials. Here we demonstrate how gold nanopatterns, produced via block copolymer self-assembly, can be incorporated into an optically transparent flexible PDMS stamp, termed a plasmonic stamp, and used to directly functionalize silicon surfaces on a sub-100 nm scale. We propose that the high intensity electric fields that result from the localized surface plasmons of the gold nanoparticles in the plasmonic stamps upon illumination with low intensity green light, lead to generation of electron-hole pairs in the silicon that drive spatially localized hydrosilylation. This approach demonstrates how localized surface plasmons can be used to enable functionalization of technologically relevant surfaces with nanoscale control.

Nanopatterned textile-based wearable triboelectric nanogenerator

Here we report a fully flexible, foldable nanopatterned wearable triboelectric nanogenerator (WTNG) with high power-generating performance and mechanical robustness. Both a silver (Ag)-coated textile and polydimethylsiloxane (PDMS) nanopatterns based on ZnO nanorod arrays on a Ag-coated textile template were used as active triboelectric materials. A high output voltage and current of about 120 V and 65 μA, respectively, were observed from a nanopatterned PDMS-based WTNG, while an output voltage and current of 30 V and 20 μA were obtained by the non-nanopatterned flat PDMS-based WTNG under the same compressive force of 10 kgf. Furthermore, very high voltage and current outputs with an average value of 170 V and 120 μA, respectively, were obtained from a four-layer-stacked WTNG under the same compressive force. Notably it was found there are no significant differences in the output voltages measured from the multilayer-stacked WTNG over 12 000 cycles, confirming the excellent mechanical durability of WTNGs. Finally, we successfully demonstrated the self-powered operation of light-emitting diodes, a liquid crystal display, and a keyless vehicle entry system only with the output power of our WTNG without any help of external power sources.

Anomalous rapid defect annihilation in self-assembled nanopatterns by defect melting

Molecular self-assembly commonly suffers from dense structural defect formation. Spontaneous defect annihilation in block copolymer (BCP) self-assembly is particularly retarded due to significant energy barrier for polymer chain diffusion and structural reorganization. Here we present localized defect melting induced by blending short neutral random copolymer chain as an unusual method to promote the defect annihilation in BCP self-assembled nanopatterns. Chemically neutral short random copolymer chains blended with BCPs are specifically localized and induce local disordered states at structural defect sites in the self-assembled nanopatterns. Such localized "defect melting" relieves the energy penalty for polymer diffusion and morphology reorganization such that spontaneous defect annihilation by mutual coupling is anomalously accelerated upon thermal annealing. Interestingly, neutral random copolymer chain blending also causes morphology-healing self-assembly behavior that can generate large-area highly ordered 10 nm scale nanopattern even upon poorly defined defective prepatterns. Underlying mechanisms of the unusual experimental findings are thoroughly investigated by three-dimensional self-consistent field theory calculation.

Investigation of early cell-surface interactions of human mesenchymal stem cells on nanopatterned β-type titanium-niobium alloy surfaces

Multi-potent adult mesenchymal stem cells (MSCs) derived from bone marrow have therapeutic potential for bone diseases and regenerative medicine. However, an intrinsic heterogeneity in their phenotype, which in turn results in various differentiation potentials, makes it difficult to predict the response of these cells. The aim of this study is to investigate initial cell-surface interactions of human MSCs on modified titanium alloys. Gold nanoparticles deposited on β-type Ti-40Nb alloys by block copolymer micelle nanolithography served as nanotopographical cues as well as specific binding sites for the immobilization of thiolated peptides present in several extracellular matrix proteins. MSC heterogeneity persists on polished and nanopatterned Ti-40Nb samples. However, cell heterogeneity and donor variability decreased upon functionalization of the gold nanoparticles with cyclic RGD peptides. In particular, the number of large cells significantly decreased after 24 h owing to the arrangement of cell anchorage sites, rather than peptide specificity. However, the size and number of integrin-mediated adhesion clusters increased in the presence of the integrin-binding peptide (cRGDfK) compared with the control peptide (cRADfK). These results suggest that the use of integrin ligands in defined patterns could improve MSC-material interactions, not only by regulating cell adhesion locally, but also by reducing population heterogeneity.

Electrical biomolecule detection using nanopatterned silicon via block copolymer lithography

An electrical biosensor exploiting a nanostructured semiconductor is a promising technology for the highly sensitive, label-free detection of biomolecules via a straightforward electronic signal. The facile and scalable production of a nanopatterned electrical silicon biosensor by block copolymer (BCP) nano-lithography is reported. A cost-effective and large-area nanofabrication, based on BCP self-assembly and single-step dry etching, is developed for the hexagonal nanohole patterning of thin silicon films. The resultant nanopatterned electrical channel modified with biotin molecules successfully detects the two proteins, streptavidin and avidin, down to nanoscale molarities (≈1 nm). The nanoscale pattern comparable to the Debye screening length and the large surface area of the three-dimensional silicon nanochannel enable excellent sensitivity and stability. A device simulation confirms that the nanopatterned structure used in this work is effective for biomolecule detection. This approach relying on the scalable self-assembly principle offers a high-throughput manufacturing process for clinical lab-on-a-chip diagnoses and relevant biomolecular studies.

Fine tuning and efficient T cell activation with stimulatory aCD3 nanoarrays

Anti-CD3 (aCD3) nanoarrays fabricated by self-assembled nanopatterning combined with site-directed protein immobilization techniques represent a novel T cell stimulatory platform that allows tight control over ligand orientation and surface density. Here, we show that activation of primary human CD4+ T cells, defined by CD69 upregulation, IL-2 production and cell proliferation, correlates with aCD3 density on nanoarrays. Immobilization of aCD3 through nanopatterning had two effects: cell activation was significantly higher on these surfaces than on aCD3-coated plastics and allowed unprecedented fine-tuning of T cell response.

T cell activation is determined by the number of presented antigens

Antigen recognition is a key event during T cell activation. Here, we introduce nanopatterned antigen arrays that mimic the antigen presenting cell surface during T cell activation. The assessment of activation related events revealed the requirement of a minimal density of 90-140 stimulating major histocompatibility complex class II proteins (pMHC) molecules per μm(2). We demonstrate that these substrates induce T cell responses in a pMHC dose-dependent manner and that the number of presented pMHCs dominates over local pMHC density.

Adhesion, proliferation, and differentiation of mesenchymal stem cells on RGD nanopatterns of varied nanospacings

The present report is an extension of our preceding publication in Biomaterials (2013) entitled "Effect of RGD nanospacing on differentiation of stem cells." Cell-adhesive peptide arginine-glycine-aspartate (RGD) was nanopatterned on a non-fouling poly(ethylene glycol) (PEG) hydrogel, and mesenchymal stem cells (MSCs) derived from rat bone marrow were cultured on the patterned surfaces at nanospacings from 37 to 124 nm. Cell adhesion parameters such as spreading areas varied with RGD nanospacings significantly. The differences were well observed at both the first and eighth days, which confirmed the persistence of this nanospacing effect on our nanopatterns. The proliferation rate also varied with the nanospacings. Osteogenic and adipogenic inductions were undertaken, and a significant influence of RGD nanospacing on stem cell differentiation was found. The effect on differentiation cannot be simply interpreted by differences in cell adhesion and proliferation. We further calculated the fractions of single, coupled, and multiple cells on those nanopatterns, and ruled out the possibility that the extent of cell-cell contact determined the different differentiation fractions. Accordingly, we reinforced the idea that RGD nanospacing might directly influence stem cell differentiation.