Amorphous Mo-Ta Oxide Nanotubes for Long-Term Stable Mo Oxide-Based Supercapacitors

With a large-scale usage of portable electric appliances, a high demand for increasingly high-density energy storage devices has emerged. MoO₃ has, in principle, a large potential as a negative electrode material in supercapacitive devices due to high charge densities that can be obtained from its reversible redox reactions. Nevertheless, the extremely poor electrochemical stability of MoO₃ in aqueous electrolytes prevents a practical use in high capacitance devices. In this work, we describe how to overcome this severe stability issue by forming amorphous molybdenum oxide/tantalum oxide nanotubes by anodic oxidation of a Mo-Ta alloy. The presence of a critical amount of Ta oxide (>20 at. %) prevents the electrochemical decay of the MoO₃ phase and thus yields an extremely high stability. Due to the protection provided by tantalum oxide, no capacitance losses are measureable after 10,000 charging/discharging cycles.

A Versatile Solvent-Induced Polymerization Strategy To Synthesize Free-Standing Porous Polymer Nanosheets and Nanotubes for Fast Iodine Capture

Two-dimensional (2D) porous polymers have demonstrated great potential in gas capture and surface catalysis as well as energy storage and conversion. Current synthesis of 2D porous polymers strongly depends on the usage of templates or an additional exfoliation process. The resultant products have uncontrollable morphology and structure, low structure integrity, and relatively low yield. Herein, a facile and high-throughput solvent-induced polymerization strategy to prepare ultrathin free-standing 2D porous hyper-cross-linked polymer nanosheets with large surface area and high sulfur content by cross-linking steric hexakis(benzylthio)benzene and thiophene is reported. Using this approach, the morphologies (nanosheets and nanotubes) and specific surface areas (658-1150 m² g^-1) of porous hyper-cross-linked polymers can be simply tailored by adjusting the cross-linking degree between monomers. The as-synthesized porous hyper-cross-linked polymer nanotubes exhibit promising iodine capture performance, including a superior iodine uptake capacity (∼270 wt %) and a rapid equilibrium adsorption (within 60 min). This method will pave a new avenue for the synthesis of advanced 2D porous polymers for various applications.

Bottom-Up Fabrication of Protein Nanowires via Controlled Self-Assembly of Recombinant Geobacter Pilins

Metal-reducing bacteria in the genus Geobacter use a complex protein apparatus to guide the self-assembly of a divergent type IVa pilin peptide and synthesize conductive pilus appendages that show promise for the sustainable manufacturing of protein nanowires. The preferential helical conformation of the Geobacter pilin, its high hydrophobicity, and precise distribution of charged and aromatic amino acids are critical for biological self-assembly and conductivity. We applied this knowledge to synthesize via recombinant methods truncated pilin peptides for the bottom-up fabrication of protein nanowires and identified rate-limiting steps of pilin nucleation and fiber elongation that control assembly efficiency and nanowire length, respectively. The synthetic fibers retained the biochemical and electronic properties of the native pili even under chemical fixation, a critical consideration for integration of the nanowires into electronic devices. The implications of these results for the design and mass production of customized protein nanowires for diverse applications are discussed.IMPORTANCE The discovery in 2005 of conductive protein appendages (pili) in the metal-reducing bacterium Geobacter sulfurreducens challenged our understanding of biological electron transfer and pioneered studies in electromicrobiology that revealed the electronic basis of many microbial metabolisms and interactions. The protein nature of the pili afforded opportunities for engineering novel conductive peptides for the synthesis of nanowires via cost-effective and scalable manufacturing approaches. However, methods did not exist for efficient production, purification, and in vitro assembly of pilins into nanowires. Here we describe platforms for high-yield recombinant synthesis of Geobacter pilin derivatives and their assembly as protein nanowires with biochemical and electronic properties rivaling those of the native pili. The bottom-up fabrication of protein nanowires exclusively from pilin building blocks confirms unequivocally the charge transport capacity of the peptide assembly and establishes the intellectual foundation needed to manufacture pilin-based nanowires in bioelectronics and other applications.

The Influence of Single-Walled Carbon Nanotubes on the Dynamic Properties of Nematic Liquid Crystals in Magnetic Field

This article aims to study the impact of carbon nanotube dispersions in liquid crystals. A theoretical model for the system's dynamics is presented, considering the elastic continuum theory and a planar alignment of liquid crystal molecules on the nanotube's surface. Experimental calculation of the relaxation times in the magnetic field was made for two cases: when the field was switched on (τon), and when it was switched off (τoff). The results indicate an increase of the relaxation time by about 25% when the magnetic field was switched off, and a smaller increase (about 10%) when the field was switched on, where both were in good agreement with the theoretical values.

Selective Synthesis of Conjugated Chiral Macrocycles: Sidewall Segments of (-)/(+)-(12,4) Carbon Nanotubes with Strong Circularly Polarized Luminescence

Carbon nanotubes (CNTs) have unusual physical properties that are valuable for nanotechnology and electronics, but the chemical synthesis of chirality- and diameter-specific CNTs and π-conjugated CNT segments is still a great challenge. Reported here are the selective syntheses, isolations, characterizations, and photophysical properties of two novel chiral conjugated macrocycles ([4]cyclo-2,6-anthracene; [4]CAn_2,6 ), as (-)/(+)-(12,4) carbon nanotube segments. These conjugated macrocyclic molecules were obtained using a bottom-up assembly approach and subsequent reductive elimination reaction. The hoop-shaped molecules can be directly viewed by a STM technique. In addition, chiral enantiomers with (-)/(+) helicity of the [4]CAn_2,6 were successfully isolated by HPLC. The new tubular CNT segments exhibit large absorption and photoluminescence redshifts compared to the monomer unit. The carbon enantiomers are also observed to show strong circularly polarized luminescence (g_lum ≈0.1). The results reported here expand the scope of materials design for bottom-up synthesis of chiral macrocycles and enrich existing knowledge of their optoelectronic properties.

CsPbI3 Nanotube Photodetectors with High Detectivity

In the present work, the exploration of photodetectors (PDs) based on CsPbI₃ nanotubes are reported. The as-prepared CsPbI₃ nanotubes can be stable for more than 2 months under air conditions. It is found that, in comparison to the nanowires, nanobelts, and nanosheets, the nanotubes can be advantageous to be used as the functional units for PDs, which is mainly attributed to the enhanced light absorption ability induced by the light trapping effect within the tube cavity. As a proof of concept, the as-constructed PDs based on CsPbI₃ nanotube present an overall excellent performance with a responsivity (R_λ ), external quantum efficiency (EQE) and detectivity of 1.84 × 10³ A W^-1 , 5.65 × 10⁵ % and 9.99 × 10¹³ Jones, respectively, which are all comparable to state-of-the-art ones for all-inorganic perovskite PDs.

Fabrication of TiO2-Nanotube-Array-Based Supercapacitors

In this work, a simple and cost-effective electrochemical anodization technique was adopted to rapidly grow TiO₂ nanotube arrays on a Ti current collector and to utilize the synthesized materials as potential electrodes for supercapacitors. To accelerate the growth of the TiO₂ nanotube arrays, lactic acid was used as an electrolyte additive. The as-prepared TiO₂ nanotube arrays with a high aspect ratio were strongly adhered to the Ti substrate. X-ray diffraction (XRD) and transmission electron microscopy (TEM) results confirmed that the TiO₂ nanotube arrays were crystallized in the anatase phase. TEM images confirmed the nanotublar-like morphology of the TiO₂ nanotubes, which had a tube length and a diameter of ~16 and ~80 nm, respectively. The electrochemical performance of the TiO₂ nanotube array electrodes was evaluated using the cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge/discharge (GCD) measurements. Excellent electrochemical response was observed for the electrodes based on the TiO₂ nanotube arrays, as the cells delivered a high specific capacitance of 5.12 mF/cm² at a scan rate of 100 mV/s and a current density of 100 µA/cm². The initial capacity was maintained for more than 250 cycles. Further, a remarkable rate capability response was observed, as the cell retained 88% of the initial areal capacitance when the scan rate was increased from 10 to 500 mV/s. The results suggest the suitability of TiO₂ nanotube arrays as electrode materials for commercial supercapacitor applications.

The Synergistic Effect of a Bimetallic Catalyst for the Synthesis of Carbon Nanotube Aerogels and their Predominant Chirality

Synthesis of continuous spinnable carbon nanotube (CNT) fibers is the most promising method for producing CNT fibers for commercial applications. The floating-catalyst chemical vapor deposition (FC-CVD) method is a rapid process that achieves catalyst formation, CNT nucleation and growth, and aerogel-like sock formation within a few seconds. However, the formation mechanism is unknown. Herein, the progress of CNT fiber formation with bimetallic catalysts was studied, and the effect of catalyst composition to CNT fiber synthesis and their structural properties was investigated. In the case of bimetallic catalysts, the carbon source rapidly decomposes and generates various secondary hydrocarbon species, such as CH₄ , C₂ H₄ , C₂ H₂ , C₃ H₆ , and C₄ H₁₀ whereas monometallic catalysts generate only CH₄ and C₂ H₄ on decomposition. CNT fiber formation with Fe₁ Ni₀ begins about 400 mm from the reactor entrance, whereas CNT formation with Fe_0.8 Ni_0.2 and Fe_0.5 Ni_0.5 begins at about 500 and 300 mm, respectively. The formed CNT bundles and individual CNTs are oriented along the gas flow at these locations. The enhanced rate of fiber formation and lowering of growth temperature associated with bimetallic catalysts is explained by the synergistic effects between the two metals. The synthesized CNTs become predominantly semiconducting with increasing Ni contents.

Guided Assembly of Well-Defined Hierarchical Nanoporous Polymers by Lewis Acid-Base Interactions

Three-dimensional hierarchical nanoporous polymers and carbon nanomaterials with well-defined superstructures are of great interest for various intelligent applications, whereas a facile and versatile approach to access those materials with a high surface area, stable well-defined morphology, and ordered pores still remains a significant challenge. Herein, we report a self-regulated Lewis acid-base interaction-mediated assembly strategy for the in situ synthesis of morphology-engineered hyper-cross-linked porous polymers and carbon materials. A series of functionalized aromatic compounds (FAC) is subjected to self-cross-linking via classic Friedel-Crafts chemistry to achieve stable porous polymers with a high surface area. Varying the monomer/catalyst combination had a dramatic effect on the acid-base interaction, facilitating the tailoring of the self-assembled morphologies from nanotubes to hollow nanospheres, and even nanosheets. A mechanistic study showed that the byproducts generated during cross-linking orchestrate the interactions between the catalyst (acid) and FAC (base) and simultaneously drive the self-assembly to yield specific morphologies. Based on the rigid hollow polymer framework and intrinsic hydroxyl functionality, the hyper-cross-linked hollow nanospheres were easily transformed to an acid-functionalized catalyst for efficient biodiesel production. Moreover, high-quality porous carbonaceous nanocounterparts such as carbon nanotubes, hollow carbon nanospheres, and carbon nanosheets could also be produced by direct pyrolysis of the corresponding polymer precursors. These findings may provide guidance for the facile design of morphology-controlled functionalized polymers and carbon nanomaterials for various applications.

Effects of calcium and phosphorus incorporation on the properties and bioactivity of TiO2 nanotubes

In this study, we investigate the formation of calcium and phosphorus-doped TiO₂ nanotubes, produced by potentiostatic anodization of Ti in viscous electrolyte-containing HF and Ca/P ions. Characterization of the produced oxide layer was conducted using scanning electron microscopy, glancing-angle X-ray diffraction, X-ray photoelectron spectroscopy, contact angle, and protein adsorption measurements. Adipose-derived stem cells were used to study material cytotoxicity, cell viability and proliferation, and cell morphology and growth. To evaluate the adipose-derived stem-cell differentiation, we investigated the expression of osteocalcin and osteopontin by cells as well as calcium mineralization. Results show that it was possible to produce a superhydrophilic titanium oxide nanotube layer with incorporation of Ca and P ions. The presence of Ca and P in the oxide layer not only improved the cell adhesion and proliferation but also stimulated the production of key marker proteins indicating differentiation of cells.

Ti-rich TiO2 Tubular Nanolettuces by Electrochemical Anodization for All-Solid-State High-Rate Supercapacitor Devices

Supercapacitors store charge by ion adsorption or fast redox reactions on the surface of porous materials. One of the bottlenecks in this field is the development of biocompatible and high-rate supercapacitor devices by scalable fabrication processes. Herein, a Ti-rich anatase TiO₂ material that addresses the above-mentioned challenges is reported. Tubular nanolettuces were fabricated by a cost-effective and fast anodization process of Ti foil. They attained a large potential window of 2.5 V in a neutral electrolyte owing to the high activation energy for water splitting of the (1 0 1) facet. Aqueous and all-solid-state devices showed diffusion time constants of 46 and 1700 ms, as well as high maximum energy (power) densities of 0.844 (0.858) and 0.338 μWh cm^-2 (0.925 mW cm^-2 ), respectively. The all-solid-state device showed ultrahigh stability of 96 % in capacitance retention after 20 000 galvanostatic charge/discharge cycles. These results open an avenue to fabricate biochemically inert supercapacitor devices.

Controlling the Degree of Functionalization: In-Depth Quantification and Side-Product Analysis of Diazonium Chemistry on SWCNTs

We present an in-depth qualitative and quantitative analysis of a reaction between 4-iodobenzenediazonium tetrafluoroborate and single-walled carbon nanotubes (SWCNTs) via thermogravimetric analysis coupled with mass spectrometry (TG-MS) or a gas chromatography and mass spectrometry (TG-GC-MS) as well as Raman spectroscopy. We propose a method for precise determination of the degree of functionalization and quantification of physisorbed aromates, detaching around their boiling point, alongside covalently bonded ones (cleavage over 200 °C). While the presence of some side products like phenol- or biphenyl species could be excluded, residual surfactant and minor amounts of benzene could be identified. A concentration-dependent experiment shows that the degree of functionalization increases with the logarithm of the concentration of applied diazonium salt, which can be exploited to precisely adjust the amount of aryl addends on the nanotube sidewall, up to 1 moiety per 100 carbon atoms.

Retarded Solid-State Rotations of an Oval-Shaped Guest in a Deformed Cylinder with CH-π Arrays

Upon encapsulating an oval-shaped hydrocarbon guest, a cylindrical host deforms its shape to maximize intermolecular contacts. Structure-assembly relationship studies with a series of hydrocarbon guests disclosed the importance of molecular shapes and CH-π contacts. Multiple contacts and weak CH-π hydrogen bonds resulted in an optimal assembly; however, the shape deformation resulted in severe retardation of rotational motions in the crystal. Thus, unlike a circular guest, the oval-shaped guest did not change its orientation in the host. Unexpectedly, the planar guest did not affect the packing structure to form a double helix in intertwined host arrays.

Isolation of Single-Wired Transition-Metal Monochalcogenides by Carbon Nanotubes

The successful isolation of single layers from two-dimensional (2D) van der Waals (vdW)-layered materials has opened new frontiers in condensed matter physics and materials science. Their discovery and unique properties laid the foundation for exploring 1D counterparts. However, the isolation of 1D vdW-wired materials has thus far remained a challenge, and effective techniques are demanded. Here we report the facile synthesis of isolated transition-metal monochalcogenide MoTe nanowires by using carbon nanotubes (CNTs) as molds. Individual nanowires are perfectly separated by CNTs with a minimal interaction, enabling detailed characterization of the single wires. Transmission electron microscopy revealed unusual torsional motion of MoTe nanowires inside CNTs. Confinement of 1D vdW-wired materials to the nanotest tubes might open up possibilities for exploring unprecedented properties of the nanowires and their potential applications such as electromechanical switching devices.

Sulfur and Ti3+ co-Doping of TiO2 Nanotubes Enhance Photocatalytic H2 Evolution Without the Use of Any co-catalyst

TiO₂ nanotubes were successfully co-doped with sulfur and Ti³⁺ states using a facile annealing treatment in H₂ /H₂ S gas mixture. The obtained nanotubes were investigated for their photocatalytic performance and characterized by SEM, XRD, XPS, EPR, IPCE, IMPS and Mott-Schottky measurements. The synthesized co-doped TiO₂ nanotubes show an enhanced photocatalytic hydrogen production rate compared to tubes that were treated only in pure H₂ or H₂ S atmosphere-this without the presence of any co-catalyst. It was found that sulfur in co-doped TiO₂ exists in the form of S^2- and a small quantity of S⁴⁺ /S⁶⁺ , which leads to a narrowing of the band gap. However, the enhanced absorption of light in the visible range is not the key reason for the improved photocatalytic performance. We ascribe the enhanced photocatalytic activity to a synergetic effect of S mid-gap states and disordered Ti³⁺ defects that facilitate photo generated electron transfer.

Highly integrated nanocomposites of RGO/TiO2 nanotubes for enhanced removal of microbes from water

Highly integrated nanocomposite of Graphene oxide (GO) and its derivatives with metal oxides is essential for enhanced performance for various applications. Tuning the morphology is an important aspect during nanomaterials synthesis; this has an amplifying influence upon physicochemical properties of advanced functional materials. In this research work, GO/TiO₂ nanotube composites have been successfully synthesized via alkaline hydrothermal treatment method by augmenting GO layers with two different phases of TiO₂ (anatase and rutile) nanoparticles, followed by the hydrothermal treatment that also have caused reduction of GO to reduced GO (RGO). The morphology of the as-prepared samples appeared to be nanotubes with a large aspect ratio (length to diameter). The synthesized materials have been characterized using various techniques to determine their morphological and functional properties. Large surface area (158 m²/g) nanotube composites found accountable as effective disinfectant for water containing microorganisms. The antimicrobial activity of the synthesized composites was examined by disk diffusion method and optical density for bacterial growth using two different bacterial species; Escherichia Coli (E.coli, Gram-negative) and Staphylococcus Aureus (Methicillin-resistant Staphylococcus aureus, Gram-positive). The antibacterial study revealed that, the anatase phase RGO/TiO₂ nanotube composites manifested appreciable effect on both bacteria as compared to rutile phase RGO/TiO₂ nanotubecomposite.

Graphene-Encapsulated Co9 S8 Nanoparticles on N,S-Codoped Carbon Nanotubes: An Efficient Bifunctional Oxygen Electrocatalyst

An inexpensive and efficient bifunctional electrocatalyst for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is central to the rechargeable zinc-air battery. Herein, a nanohybrid, in which N,S-codoped carbon nanotubes were decorated with Co₉ S₈ nanoparticles encapsulated in porous graphene layers, was fabricated by a one-step heat-treatment process. The N,S dopant species were the major active sites for the ORR, and Co₉ S₈ nanoparticles were mainly responsible for the OER. Compared with commercial 20 wt % Pt/C and Ir/C electrocatalysts, this nanohybrid exhibited a comparable ORR half-wave potential (0.831 V vs. reversible hydrogen electrode) and OER potential (1.591 V at 10 mA cm^-2 ), better long-term stability in an alkaline medium, and a narrower potential gap (0.76 V) between ORR and OER. Furthermore, as air electrode of the rechargeable zinc-air battery, it delivered a low charge-discharge voltage gap (0.65 V at 5 mA cm^-2 ), high open-circuit potential (1.539 V), good specific capacity (805 mA h g - 1 Zn at 5 mA cm^-2 ), and excellent cycling stability (48 h), superior to those of commercial Pt/C and Ir/C catalysts, and thus showed promise for applications in renewable energy conversion devices.

Curvature- and Phase-Induced Protein Sorting Quantified in Transfected Cell-Derived Giant Vesicles

Eukaryotic cells possess a dynamic network of membranes that vary in lipid composition. To perform numerous biological functions, cells modulate their shape and the lateral organization of proteins associated with membranes. The modulation is generally facilitated by physical cues that recruit proteins to specific regions of the membrane. Analyzing these cues is difficult due to the complexity of the membrane conformations that exist in cells. Here, we examine how different types of membrane proteins respond to changes in curvature and to lipid phases found in the plasma membrane. By using giant plasma membrane vesicles derived from transfected cells, the proteins were positioned in the correct orientation and the analysis was performed in plasma membranes with a biological composition. Nanoscale membrane curvatures were generated by extracting nanotubes from these vesicles with an optical trap. The viral membrane protein neuraminidase was not sensitive to curvature, but it did exhibit strong partitioning (coefficient of K = 0.16) disordered membrane regions. In contrast, the membrane repair protein annexin 5 showed a preference for nanotubes with a density up to 10-15 times higher than that on the more flat vesicle membrane. The investigation of nanoscale effects in isolated plasma membranes provides a quantitative platform for studying peripheral and integral membrane proteins in their natural environment.

Characterizing the Cellular Response to Nitrogen-Doped Carbon Nanocups

Carbon nanomaterials, specifically, carbon nanotubes (CNTs) have many potential applications in biology and medicine. Currently, this material has not reached its full potential for application due to the potential toxicity to mammalian cells, and the incomplete understanding of how CNTs interface with cells. The chemical composition and structural features of CNTs have been shown to directly affect their biological compatibility. The incorporation of nitrogen dopants to the graphitic lattice of CNTs results in a unique cup shaped morphology and minimal cytotoxicity in comparison to its undoped counterpart. In this study, we investigate how uniquely shaped nitrogen-doped carbon nanocups (NCNCs) interface with HeLa cells, a cervical cancer epithelial cultured cell line, and RPE-1 cells, an immortalized cultured epithelial cell line. We determined that NCNCs do not elicit a cytotoxic response in cells, and that they are uptaken via endocytosis. We have conjugated fluorescently tagged antibodies to NCNCs and shown that the protein-conjugated material is also capable of entering cells. This primes NCNCs to be a good candidate for subsequent protein modifications and applications in biological systems.

In-Situ Configuration Studies on Segmented DNA Origami Nanotubes

One-dimensional nanotubes are of considerable interest in materials and biochemical sciences. A particular desire is to create DNA nanotubes with user-defined structural features and biological relevance, which will facilitate the application of these nanotubes in the controlled release of drugs, templating of other materials into linear arrays and the construction of artificial membrane channels. However, little is known about the structures of assembled DNA nanotubes in solution. Here we report an in situ exploration of segmented DNA nanotubes, composed of multiple units with set length distributions, by using synchrotron small-angle X-ray scattering (SAXS). Through joint experimental and theoretical studies, we show that the SAXS data are highly informative in the context of heterogeneous mixtures of DNA nanotubes. The structural parameters obtained by SAXS are in good agreement with those determined by atomic force microscopy (AFM), transmission electron microscopy (TEM), and dynamic light scattering (DLS). In particular, the SAXS data revealed important structural information on these DNA nanotubes, such as the in-solution diameters (≈25 nm), which could be obtained only with difficulty by use of other methods. Our results establish SAXS as a reliable structural analysis method for long DNA nanotubes and could assist in the rational design of these structures.

Self-template Synthesis of Metal Halide Perovskite Nanotubes as Functional Cavities for Tailored Optoelectronic Devices

Intriguing optoelectronic features of low-dimensional perovskites drive researchers to develop novel nanostructures for exploring new photophysical properties and meeting the requirements of future practical applications. Here, we report the facile and universal synthesis of metal halide perovskite nanotubes (NTs) in a micro alkylammonium emulsion system for the first time. The [PbBr₆]^4--based NTs with a diameter of 300 nm and length of 100 μm were synthesized through the reaction of PbBr₂ and long-chain bromide in advance, which can be controllably converted into general metal halide perovskite APbBr₃ (A = Cs, FA, MA) with preserved tubular morphology by introducing the Cs⁺, MA⁺, and FA⁺ cations. Importantly, the NTs can readily couple with other nanofillers exhibiting tunable and novel optoelectronic properties demonstrated by the photodetectors. The device performance can be significantly improved and broadened to infrared photoresponse through the introduction of Au nanocrystal (NC) plasma and PbS NCs, respectively. These results demonstrate that the metal halide perovskite NTs are expected to enrich the diversity of nanostructures and have a huge potential in the fabrication of integrated, light-manipulated, and miniaturized electronic and photonic devices.

Design and Characterization of RNA Nanotubes

RNA is a functionally rich and diverse biomaterial responsible for regulating several cellular processes. This functionality has been harnessed to build predominately small nanoscale structures for drug delivery and the treatment of disease. The understanding of design principles to build large RNA structures will allow for further control of stoichiometry and spatial arrangement drugs and ligands. We present the design and characterization of RNA nanotubes that self-assemble from programmable monomers, or tiles, formed by five distinct RNA strands. Tiles include double crossover junctions and assemble via single-stranded sticky-end domains. We find that nanotube formation is dependent on the intertile crossover distance. The average length observed for the annealed RNA nanotubes is ≈1.5 μm, with many nanotubes exceeding 10 μm, enabling the characterization of RNA nanotubes length distribution via fluorescence microscopy. Assembled tubes were observed to be stable for more than 24 h, however post-annealing growth under isothermal conditions does not occur. Nanotubes assemble also from RNA tiles modified to include a single-stranded overhang (toehold), suggesting that it may be possible to decorate these large RNA scaffolds with nanoparticles or other nucleic acid molecules.

Galvanic Replacement Synthesis of Highly Uniform Sb Nanotubes: Reaction Mechanism and Enhanced Sodium Storage Performance

One-dimensional nanotubes are very useful for achieving excellent performance in lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs) due to the fact that tubular structures can effectively alleviate the structural strain and shorten the ion diffusion length during repeated cycling. In this work, we report a Cu₂Sb-mediated growth strategy to controllably fabricate highly uniform Sb nanotubes (NTs), as well as Cu@Cu₂Sb and Cu₂Sb@Sb composite NTs, via a facile galvanic replacement reaction using Cu nanowires (NWs) as sacrificial templates. Benefiting from their structural merits, the Sb NTs manifest excellent sodium storage performance with superior rate performance (286 mAh g^-1 at 10 A g^-1) and extraordinary cycling stability (342 mAh g^-1 after 6000 cycles at 1 A g^-1). Furthermore, a full cell with Sb NTs as anode and Na₃(VOPO₄)₂F as cathode exhibits a high energy density (252 Wh kg^-1) and high output voltage (2.7 V), revealing their significant application promise in the next-generation SIBs.

Synthesis and characterization of quaternary La(Sr)S-TaS2 misfit-layered nanotubes

Misfit-layered compounds (MLCs) are formed by the combination of different lattices and exhibit intriguing structural and morphological characteristics. MLC Sr x La1- x S-TaS2 nanotubes with varying Sr composition (10, 20, 40, and 60 Sr atom %, corresponding to x = 0.1, 0.2, 0.4 and 0.6, respectively) were prepared in the present study and systematically investigated using a combination of high-resolution electron microscopy and spectroscopy. These studies enable detailed insight into the structural aspects of these phases to be gained at the atomic scale. The addition of Sr had a significant impact on the formation of the nanotubes with higher Sr content, leading to a decrease in the yield of the nanotubes. This trend can be attributed to the reduced charge transfer between the rare earth/S unit (La x Sr1- x S) and the TaS2 layer in the MLC which destabilizes the MLC lattice. The influence of varying the Sr content in the nanotubes was systematically studied using Raman spectroscopy. Density functional theory calculations were carried out to support the experimental observations.

Effect of Pt Deposits on TiO2 Electrocatalytic Activity Highlighted by Electron Tomography

Characterizing materials at small scales presents major challenges in the engineering of nanocomposite materials having a high specific surface area. Here, we show the application of electron tomography to describe the three-dimensional structure of highly ordered TiO₂ nanotube arrays modified with Pt nanoparticles. The titanium oxide nanotubes were prepared by the electrochemical anodization of a Ti substrate after which Pt was deposited by magnetron sputtering. Such a composite shows high electrochemical activity that depends on the amount of the metal and the morphological parameters of the microstructure. However, a TiO₂ structure modified with metallic nanoparticles has never been visualized in 3D, making it very difficult to understand the relationship between electrocatalytic activity and morphology. In this paper, TiO₂ nanotubes of different sizes and different amounts of Pt were analyzed using the electron microscopy technique. Electrocatalytic activity was studied using the cyclic voltammetry (CV) method. For selected samples, electron tomography 3D structure reconstruction was performed to describe their fine microstructure. The highest activity was detected in the sample having bigger nanotubes (25 V) where the porosity of the structure was high and the Pt content was 0.1 mg cm^-2. 3D imaging using electron tomography opens up new possibilities in the design of electrocatalytic materials.

Solid Polymer Electrolyte-Coated Macroporous Titania Nanotube Photoelectrode for Gas-Phase Water Splitting

Photoelectrochemical (PEC) water vapor splitting by using n-type semiconductor electrodes with a proton exchange membrane (PEM) enabled pure hydrogen production from humidity in ambient air. We proved a design concept that the gas-electrolyte-semiconductor triple-phase boundary on a nanostructured photoanode is important for the photoinduced gas-phase reaction. A surface coating of solid-polymer electrolyte on a macroporous titania-nanotube array (TNTA) electrode markedly enhanced the incident photon-to-current conversion efficiency (IPCE) at the gas-solid interface. This indicates that proton-coupled electron transfer is the rate-determining step on the bare TNTA electrode for the gas-phase PEC reaction. The perfluorosulfonate ionomer-coated TNTA photoanode exhibited an IPCE of 26 % at an applied voltage of 1.2 V under 365 nm ultraviolet irradiation. The hydrogen production rate in a large PEM-PEC cell (16 cm² ) was 10 μmol min^-1 .

Carbon-Coated and Interfacial-Functionalized Mixed-Phase Mox Ti1-x O2-δ Nanotubes as Highly Active and Durable PtRu Catalyst Support for Methanol Electrooxidation

A synchronous carbon-coating and interfacial-functionalizing approach is proposed for the fabrication of Mo-doped Mo_x Ti_1-x O_2-δ nanotubes (C@IF-MTNTs) under mild hydrothermal reaction with subsequent annealing as advanced catalyst supports for PtRu nanoparticles (NPs) towards methanol electrooxidation. The carbonation of glucose and Mo-doping takes place simultaneously at the interface of pristine anatase TiO₂ nanotubes (TNTs), generating a unique concentric multilayered one-dimensional (1D) structure with crystalline an anatase/rutile mixed-phase TiO₂ core and Mo-functionalized interface and subsequently a carbon shell. The obtained PtRu/C@IF-MTNTs catalyst exhibits an over 2 times higher mass activity with comparable durability than that of the unmodified PtRu/C@TNTs catalyst and over 1.7 times higher mass activity with over 20 % higher stability than that of PtRu/C catalyst. Such superior catalytic performance towards methanol electrooxidation is ascribed to the Mo-functionalized interface, concentric multilayered 1D architecture, and anatase/rutile mixed-phase core, which facilitates the charge transport through 1D structural support and electronic interaction between C@IF-MTNTs and ultrafine PtRu NPs. This work reveals the critical application of a 1D interfacial functionalized architecture for advanced energy storage and conversion.

Extracellular membrane vesicles in the three domains of life and beyond

Cells from all three domains of life, Archaea, Bacteria and Eukarya, produce extracellular vesicles (EVs) which are sometimes associated with filamentous structures known as nanopods or nanotubes. The mechanisms of EV biogenesis in the three domains remain poorly understood, although studies in Bacteria and Eukarya indicate that the regulation of lipid composition plays a major role in initiating membrane curvature. EVs are increasingly recognized as important mediators of intercellular communication via transfer of a wide variety of molecular cargoes. They have been implicated in many aspects of cell physiology such as stress response, intercellular competition, lateral gene transfer (via RNA or DNA), pathogenicity and detoxification. Their role in various human pathologies and aging has aroused much interest in recent years. EVs can be used as decoys against viral attack but virus-infected cells also produce EVs that boost viral infection. Here, we review current knowledge on EVs in the three domains of life and their interactions with the viral world.

Transport Properties of One-Step Compression Molded Epoxy Nanocomposite Foams

Owing to their high strength and stiffness, thermal and environmental stability, lower shrinkage, and water resistance, epoxy resins have been the preferred matrix for the development of syntactic foams using hollow glass microspheres. Although these foams are exploited in multiple applications, one of their issues is the possibility of breakage of the glass hollow microspheres during processing. Here, we present a straightforward and single-step foaming protocol using expandable polymeric microspheres based on the well-established compression molding process. We demonstrate the viability of the protocol producing two sets of nanocomposite foams filled with carbon-based nanoparticles with improved transport properties.

Antibacterial and osteogenesis performances of LL37-loaded titania nanopores in vitro and in vivo

Background: Many studies have shown that the size of nanotube (NT) can significantly affect the behavior of osteoblasts on titanium-based materials. But the weak bonding strength between NT and substrate greatly limits their application. Purpose: The objective of this study was to compare the stability of NT and nanopore (NP) coatings, and further prepare antibacterial titanium-based materials by loading LL37 peptide in NP structures. Methods: The adhesion strength of NT and NP layers was investigated using a scratch tester. The proliferation and differentiation of MC3T3-E1 cells on different substrates were evaluated in vitro by CCK8, alkaline phosphatase activity, mineralization and polymerase chain reaction assays. The antibacterial rates of NP and NP/LL37 were also measured by spread plate method. Moreover, the osteogenesis around NP and NP/LL373 in vivo was further evaluated using uninfected and infected models. Results: Scratch test proved that the NP layers had stronger bonding strength with the substrates due to their continuous pore structures and thicker pipe walls than the independent NT structures. In vitro, cell results showed that MC3T3-E1 cells on NP substrates had better early adhesion, spreading and osteogenic differentiation than those of NT group. In addition, based on the drug reservoir characteristics of porous materials, the NP substrates were also used to load antibacterial LL37 peptide. After loading LL37, the antibacterial and osteogenic induction abilities of NP were further improved, thus significantly promoting osteogenesis in both uninfected and infected models. Conclusion: We determined that the NP layers had stronger bonding strength than NT structures, and the corresponding NP materials might be more suitable than NT for preparing drug-device combined titanium implants for bone injury treatment.

Narrowing Segments of Helical Carbon Nanotubes with Curved Aromatic Panels

Rigid molecular cylinders with a 1 nm diameter were synthesized by assembling arylene panels with Pt-mediated macrocylization. Chrysenylene panels that previously participated in tetrameric macrocyclization were contorted by the addition of two benzo groups on the sides to form dibenzochrysenylene, which allowed for a reduction in the numbers of participating panels to three. Consequently, narrowed cyclochrysenylene congeners were obtained. The narrowed chiral cylinders possessed width-dependent chiroptical properties. The magnetic transition dipole moment was dictated by the radius of a ring-current-like circle that was formed by local electric transition dipole moments on the cylinder.

Intracellular Drug Delivery with Anodic Titanium Dioxide Nanotubes and Nanocylinders

Titanium dioxide (TiO₂) holds remarkable promises for developing current theranostic strategies. Anodic TiO₂ nanostructures as a porous scaffold have offered a broad range of useful theranostic properties; however, previous attempts to generate single and uniform TiO₂ one-dimensional nanocarriers from anodic nanotube arrays have resulted in a broad cluster size distribution of arbitrarily broken tubes that are unsuitable for therapeutic delivery systems due to poor biodistribution and the risk of introducing tissue inflammation. Here, we achieve well-separated, uniformly shaped anodic TiO₂ nanotubes and nanocylinders through a time-varying electrochemical anodization protocol that leads to the generation of planar sheets of weakly connected nanotubes with a defined fracture point near the base. Subsequent sonication cleanly detaches the nanotubes from the base. Depending on the position of the fracture point, we can fabricate single-anodic nanocylinders that are open on both ends and nanotubes that are closed on one end. We proceed to show that anodic nanotubes and nanocylinders are nontoxic at therapeutic concentrations. When conjugated with the anticancer drug doxorubicin using a pH-responsive linker, they are readily internalized by cells and subsequently release their drug cargo into acidic intracellular compartments. Our results demonstrate that uniformly sized anodic TiO₂ nanotubes and nanocylinders are suitable for subcellular delivery of therapeutic agents in cancer therapy.

WS2 Nanotubes, 2D Nanomeshes, and 2D In-Plane Films through One Single Chemical Vapor Deposition Route

We demonstrate a versatile, catalyst free chemical vapor deposition process on insulating substrates capable of producing in one single stream one-dimensional (1D) WO_{3- x} suboxides leading to a wide range of substrate-supported 2H-WS₂ polymorphs: a tunable class of out-of-plane (of the substrate) nanophases, with 1D nanotubes and a pure WS₂, two-dimensional (2D) nanomesh (defined as a network of webbed, micron-size, few-layer 2D sheets) at its extremes; and in-plane (parallel to the substrate) mono- and few-layer 2D domains. This entails a two-stage approach in which the 2WO₃ + 7S → 2WS₂ + 3SO₂ reaction is intentionally decoupled. First, various morphologies of nanowires or nanorods of high stoichiometry, WO_2.92/WO_2.9 suboxides (belonging to the class of Magnéli phases) were formed, followed by their sulfurization to undergo reduction to the aforementioned WS₂ polymorphs. The continuous transition of WS₂ from nanotubes to the out-of-plane 2D nanomesh, via intermediary, mixed 1D-2D phases, delivers tunable functional properties, for example, linear and nonlinear optical properties, such as reflectivity (linked to optical excitations in the material), and second harmonic generation (SHG) and onset of saturable absorption. The SHG effect is very strong across the entire tunable class of WS₂ nanomaterials, weakest in nanotubes, and strongest in the 2D nanomesh. Furthermore, a mechanism via suboxide (WO_{3- x}) intermediate as a possible path to 2D domain growth is demonstrated. 2D, in-plane WS₂ domains grow via "self-seeding and feeding" where short WO_2.92/WO_2.9 nanorods provide both the nucleation sites and the precursor feedstock. Understanding the reaction path (here, in the W-O-S space) is an emerging approach toward controlling the nucleation, growth, and morphology of 2D domains and films of transition-metal dichalcogenides.

Two-Dimensional Gold Quantum Dots with Tunable Bandgaps

Metallic gold nanoparticles (Au NPs) with multilayer Au atoms are useful for plasmonic, chemical, medical, and metamaterial application. In this article, we report the opening of the bandgap in substrate-supported two-dimensional (2D) gold quantum dots (Au QDs) with monolayer Au atoms. Calculations based on density functional theory suggest that 2D Au QDs are energetically favorable over 3D Au clusters when coated on hexagonal boron nitride (BN) surfaces. Experimentally, we find that BN nanotubes (BNNTs) can be used to stabilize 2D Au QDs on their cylindrical surfaces as well as Au atoms, dimers, and trimers. The electrically insulating and optically transparent BNNTs enable the detection of the optical bandgaps of the Au QDs in the visible spectrum. We further demonstrate that the size and shapes of 2D Au QDs could be atomically trimmed and restructured by electron beam irradiation. Our results may stimulate further exploration of energetically stable, metal-based 2D semiconductors, with properties tunable atom by atom.

Copolymer-Induced Intermolecular Charge Transfer: Enhancing the Activity of Metal-Free Catalysts for Oxygen Reduction

Breaking the electroneutrality of sp² carbon lattice is a viable way for nanocarbon material to modulate the charge delocalization and to further alter the electrocatalytic activity. Positive charge spreadsheeting is preferable for catalyzing the oxygen reduction reaction (ORR) and other electrochemical reactions. Analogously to the case of intramolecular charge transfer by heteroatom doping, electrons in the conjugated carbon lattice can be redistributed by the intermolecular charge transfer from the nanocarbon material to the polyelectrolyte. A copolymeric electrolyte, epichlorohydrin-dimethylamine copolymer (EDC) was synthesized. The EDC-modified carbon nanotube (CNT) hybrid was subsequently fabricated by sonication treatment and served as a metal-free carbonaceous electrocatalyst with remarkable catalytic activity and stability. The resultant hybrid presents positive charge spreadsheeting on CNT as a result of the interfacial electron transfer from CNT to EDC. DFT calculations were further carried out to reveal that the enhancement of the wrapped EDC polyelectrolyte originates from the synergetic effect of the quaternary ammonium-hydroxyl covalently bonded structure. The CNT-EDC hybrid not only provides an atomically precise regulation to modulate nanocarbon materials from inactive carbonaceous materials into efficient metal-free catalysts, but it also opens new avenues to develop metal-free catalysts with well-defined and highly active sites.

Mechanistic Insights into the Formation of Lithium Fluoride Nanotubes

Born-Oppenheimer molecular dynamics (BOMD) and periodic density functional theory (DFT) calculations have been applied for describing the mechanism of formation of lithium fluoride (LiF) nanotubes with cubic, hexagonal, octagonal, decagonal, dodecagonal, and tetradecagonal cross-sections. It has been shown that high energy structures, such as nanowires, nanorings, nanosheets, and nanopolyhedra are transient species for the formation of stable nanotubes. Unprecedented (LiF)_n clusters (n≤12) were also identified, some of them lying less than 10 kcal mol^-[1] above their respective global minima. Such findings indicate that stochastic synthetic techniques, such as laser ablation and chemical vapor deposition, should be combined with a template-driven procedure in order to generate the nanotubes with adequate efficiency. Apart from the stepwise growth of LiF units, the formation of nanotubes was also studied by rolling up a planar square sheet monolayer, which could be hypothetically produced from the exfoliation of the FCC crystal structure. It was shown that both pathways could lead to the formation of alkali halide nanotubes, a still unprecedented set of one-dimensional materials.

Physicochemical and biological properties of novel chlorhexidine-loaded nanotube-modified dentin adhesive

A commercially available three-step (etch-and-rinse) adhesive was modified by adding chlorhexidine (CHX)-loaded nanotubes (Halloysite®, HNT) at two concentrations (CHX10% and CHX20%). The experimental groups were: SBMP (unmodified adhesive, control), HNT (SBMP modified with HNT), CHX10 (SBMP modified with HNT loaded with CHX10%), and CHX20 (SBMP modified with HNT loaded with CHX20%). Changes in the degree of conversion (DC%), Knoop hardness (KHN), water sorption (WS), solubility (SL), antimicrobial activity, cytotoxicity, and anti-matrix metalloproteinase [MMP-1] activity (collagenase-I) were evaluated. In regards to DC%, two-way ANOVA followed by Tukey's post-hoc test revealed that only the factor "adhesive" was statistically significant (p < 0.05). No significant differences were detected in DC% when 20 s light-curing was used (p > 0.05). For Knoop microhardness, one-way ANOVA followed by the Tukey's test showed statistically significant differences when comparing HNT (20.82 ± 1.65) and CHX20% (21.71 ± 2.83) with the SBMP and CHX10% groups. All adhesives presented similar WS and cytocompatibility. The CHX-loaded nanotube-modified adhesive released enough CHX to inhibit the growth of S. mutans and L. casei. Adhesive eluates were not able to effectively inhibit MMP-1 activity. The evaluation of higher CHX concentrations might be necessary to provide an effective and predictable MMP inhibition. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res B Part B, 2018. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 868-875, 2019.

A Ubiquitous Platform for Bacterial Nanotube Biogenesis

We have previously described the existence of membranous nanotubes, bridging adjacent bacteria, facilitating intercellular trafficking of nutrients, cytoplasmic proteins, and even plasmids, yet components enabling their biogenesis remain elusive. Here we reveal the identity of a molecular apparatus providing a platform for nanotube biogenesis. Using Bacillus subtilis (Bs), we demonstrate that conserved components of the flagellar export apparatus (FliO, FliP, FliQ, FliR, FlhB, and FlhA), designated CORE, dually serve for flagellum and nanotube assembly. Mutants lacking CORE genes, but not other flagellar components, are deficient in both nanotube production and the associated intercellular molecular trafficking. In accord, CORE components are located at sites of nanotube emergence. Deleting COREs of distinct species established that CORE-mediated nanotube formation is widespread. Furthermore, exogenous COREs from diverse species could restore nanotube generation and functionality in Bs lacking endogenous CORE. Our results demonstrate that the CORE-derived nanotube is a ubiquitous organelle that facilitates intercellular molecular trade across the bacterial kingdom.

•

Conserved flagellar CORE components dually serve for flagella and nanotube assembly

•

CORE mutants are deficient in nanotube formation and intercellular molecular trade

•

CORE-dependent nanotube production is conserved among distinct bacterial species

•

The CORE-nanotube organelle can provide a common path for bacterial molecular trade

Integrating Catalysis of Methane Decomposition and Electrocatalytic Hydrogen Evolution with Ni/CeO2 for Improved Hydrogen Production Efficiency

Ni/CeO₂ enables either methane decomposition or water electrolysis for pure hydrogen production. Ni/CeO₂ , prepared by a sol-gel method with only one heat treatment step, was used to catalyze methane decomposition for the generation of H₂ . The solid byproduct, Ni/CeO₂ /carbon nanotube (CNT), was further employed as an electrocatalyst in the hydrogen evolution reaction (HER) for H₂ production. The Ni/CeO₂ catalyst exhibits excellent activity for methane decomposition because CeO₂ prevents carbon encapsulation of Ni nanoparticles during the preparation process and forms a special metal-support interface with Ni. The derived CNTs act as antenna to improve conductivity and promote the dispersion of agglomerated Ni/CeO₂ . In addition, they provide H₂ diffusion paths and prevent Ni/CeO₂ from peeling off the HER electrode. Although long-term methane decomposition reduces the HER activity of Ni/CeO₂ /CNTs (owing to degradation of the delicate Ni/CeO₂ interface), the tunable nature of the synthesis makes this an attractive sustainable approach to synthesize future high-performance materials.

A conductive cell-imprinted substrate based on CNT-PDMS composite

Cell function regulation is influenced by continuous biochemical and biophysical signal exchange within the body. Substrates with nano/micro-scaled topographies that mimic the physiological niche are widely applied for tissue engineering applications. As the cartilage niche is composed of several stimulating factors, a multifunctional substrate providing topographical features while having the capability of electrical stimulation is presented. Herein, we demonstrate a biocompatible and conductive chondrocyte cell-imprinted substrate using polydimethylsiloxane (PDMS) and carbon nanotubes (CNTs) as conductive fillers. Unlike the conventional silicon wafers or structural photoresist masters used for molding, cell surface topographical replication is challenging as biological cells showed extremely sensitive to chemical solvent residues during molding. The composite showed no significant difference compared with PDMS with regard to cytotoxicity, whereas an enhanced cell adhesion was observed on the conductive composite's surface. Integration of nanomaterials into the cell seeding scaffolds can make tissue regeneration process more efficient.

The Morphology, Structure, Mechanical Properties and Biocompatibility of Nanotubular Titania Coatings before and after Autoclaving Process

The autoclaving process is one of the sterilization procedures of implantable devices. Therefore, it is important to assess the impact of hot steam at high pressure on the morphology, structure, and properties of implants modified by nanocomposite coatings. In our works, we focused on studies on amorphous titania nanotubes produced by titanium alloy (Ti6Al4V) electrochemical oxidation in the potential range 5⁻60 V. Half of the samples were drying in argon stream at room temperature, and the second ones were drying additionally with the use of immersion in acetone and drying at 396 K. Samples were subjected to autoclaving and after sterilization they were structurally and morphologically characterized using Raman spectroscopy, diffuse reflectance infrared Fourier transform spectroscopy (DRIFT) and scanning electron microscopy (SEM). They were characterized in terms of wettability, mechanical properties, and biocompatibility. Obtained results proved that the autoclaving of amorphous titania nanotube coatings produced at lower potentials (5⁻15 V) does not affect their morphology and structure regardless of the drying method before autoclaving. Nanotubular coatings produced using higher potentials (20⁻60 V) require removal of adsorbed water particles from their surface. Otherwise, autoclaving leads to the destruction of the architecture of nanotubular coatings, which is associated with the changing of their mechanical and biointegration properties.

TiO2 ALD Coating of Amorphous TiO2 Nanotube Layers: Inhibition of the Structural and Morphological Changes Due to Water Annealing

The present work presents a strategy to stabilize amorphous anodic self-organized TiO₂ nanotube layers against morphological changes and crystallization upon extensive water soaking. The growth of needle-like nanoparticles was observed on the outer and inner walls of amorphous nanotube layers after extensive water soakings, in line with the literature on water annealing. In contrary, when TiO₂ nanotube layers uniformly coated by thin TiO₂ using atomic layer deposition (ALD) were soaked in water, the growth rates of needle-like nanoparticles were substantially reduced. We investigated the soaking effects of ALD TiO₂ coatings with different thicknesses and deposition temperatures. Sufficiently thick TiO₂ coatings (≈8.4 nm) deposited at different ALD process temperatures efficiently hamper the reactions between water and F⁻ ions, maintain the amorphous state, and preserve the original tubular morphology. This work demonstrates the possibility of having robust amorphous 1D TiO₂ nanotube layers that are very stable in water. This is very practical for diverse biomedical applications that are accompanied by extensive contact with an aqueous environment.

Size-Dependent Critical Temperature and Anomalous Optical Dispersion in Ferromagnetic CrI₃ Nanotubes

Using first principles calculations, we explored the magnetic and optical properties of chromium(III) iodide (CrI₃) nanotubes (NTs) by changing their chirality and diameter. Here, we considered six types of NTs: (5,0), (5,5), (7,0), (10,0), (10,10), and (12,0) NTs. We found that both zigzag and armchair NTs had a ferromagnetic ground with a direct band gap, although the band gap was dependent on the chirality and diameter. Using the Monte Carlo simulation, we found that the Curie temperatures (T_c) exhibited chirality and diameter dependence. In zigzag NTs, the larger the tube diameter, the larger the T_c, while it decreased with increasing diameter in the armchair tube. We found that the T_c was almost doubled when the diameter increased two-fold. This finding may guide development of room temperature ferromagnetism in zigzag NTs. We also found that the CrI₃ NTs displayed anisotropic optical properties and anomalous optical dispersion in the visible range. Specifically, the (10,0) zigzag NT had a large refractive index of 2 near the infrared region, while it became about 1.4 near blue light wavelengths. We also obtained large reflectivity in the ultraviolet region, which can be utilized for UV protection. Overall, we propose that the CrI₃ NTs have multifunctional physical properties for spintronics and optical applications.

Nanowire-Templated Synthesis of FeNx -Decorated Carbon Nanotubes as Highly Efficient, Universal-pH, Oxygen Reduction Reaction Catalysts

It is of increasing importance to develop highly active and economical oxygen reduction reaction (ORR) electrocatalysts, which have great significance for the large-scale implementation of various energy conversion systems, including metal-air batteries and fuel cells. Herein, a novel method to synthesize FeN_x -decorated carbon nanotubes as a high-efficiency ORR catalyst, by utilizing ZnO nanowires as a sacrificial template and a Fe-polydopamine complex as metal and carbon sources, is reported. The obtained catalyst shows great potential for replacing Pt/C as the ORR catalyst under various pH conditions, from alkaline to acidic electrolytes. The high conductivity, large surface area of the carbon nanotube, and highly active FeN_x species contributed greatly to the high performance of the catalyst. The work presented herein paves a new way for the synthesis of 1D porous nanomaterials for a broad range of energy-related applications.

Titania Nanotubes/Hydroxyapatite Nanocomposites Produced with the Use of the Atomic Layer Deposition Technique: Estimation of Bioactivity and Nanomechanical Properties

Titanium dioxide nanotubes/hydroxyapatite nanocomposites were produced on a titanium alloy (Ti6Al4V/TNT/HA) and studied as a biocompatible coating for an implant surface modification. As a novel approach for this type of nanocomposite fabrication, the atomic layer deposition (ALD) method with an extremely low number of cycles was used to enrich titania nanotubes (TNT) with a very thin hydroxyapatite coating. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used for determination of the structure and the surface morphology of the fabricated nanocoatings. The biointegration activity of the layers was estimated based on fibroblasts’ proliferation on the TNT/HA surface. The antibacterial activity was determined by analyzing the ability of the layers to inhibit bacterial colonization and biofilm formation. Mechanical properties of the Ti6Al4V/TNT/HA samples were estimated by measuring the hardness, Young’s module, and susceptibility to scratching. The results revealed that the nanoporous titanium alloy coatings enriched with a very thin hydroxyapatite layer may be a promising way to achieve the desired balance between biofunctional and biomechanical properties of modern implants.

Unbiased Rotational Motions of an Ellipsoidal Guest in a Tight Yet Pliable Host

In the design of machinery such as steel bearings, a fundamental understanding of material characteristics provides an indispensable basis for the design. Although hydrocarbon cycloarylenes have started to be used for providing unique supramolecular bearings with anomalous dynamic behaviors, their fundamental understanding is immature. A unique property of the cycloarylene host is now reported: the cyclic host is so pliable that it tracks the orientational changes of the ellipsoidal guest, that is, C₇₀ fullerene. Unique structures of the complex were revealed by spectroscopic and crystallographic analyses, and additional theoretical investigations deepened our understanding by revealing the structural changes associated with unbiased rotational motions.

Temperature-Gating Titania Nanotubes Regulate Migration of Endothelial Cells

External stimuli-responsive biomaterials represent a type of promising candidates for addressing the complexity of biological systems. In this study, a platform based on the combination of temperature-sensitive polymers and a nanotube array was developed for loading sphingosine 1-phosphate (S1P) and regulating the migration of endothelial cells (ECs) at desired conditions. The localized release dosage of effectors could be controlled by the change of environmental temperature. At a culture temperature above the lower critical solution temperature, the polymer "gatekeeper" with a collapsed conformation allowed the release of S1P, which in turn enhanced the migration of ECs. The migration rate of single cells was significantly enhanced up to 58.5%, and the collective migration distance was also promoted to 25.1% at 24 h and 33.2% at 48 h. The cell morphology, focal adhesion, organization of cytoskeleton, and expression of genes and proteins related to migration were studied to unveil the intrinsic mechanisms. The cell mobility was regulated by the released S1P, which would bind with the S1PR1 receptor on the cell membrane and trigger the Rho GTPase pathway.

B7 Liquid Crystal Filament Growth in Presence of Carbon Nanotubes

Liquid crystal phases formed from bent-core mesogens have attracted much interest of the liquid crystal research community, due to the manifestation of chirality effects from achiral molecules. One of the most elusive of the bent-core phases is the B7 phase, which at its early stage often forms in a helical filament fashion. We investigate the growth of such filaments in the presence of single-walled nanotubes to elucidate possible effects on the growth dynamics and helicity of B7 helical filaments. It is found that the filament width slightly decreases in comparison to the neat B7 material, suggesting a more tightly bound structure around the nanotubes, with the nanotubes likely acting as the core of the helical filament. No effects on pitch or periodicity of the helical superstructure is observed. The filament growth velocity quickly decreases as nanotubes are added to the B7 phase, indicating that a more tightly bound structure needs a longer time of formation. An observed buckling instability is of interest as a microscopic example for the study of nonlinear dynamics theories of filaments. The present investigation is thus of general importance for nanoparticle directed growth of filaments, which has applications in biomolecular growth and high tensile strength fibres.

A Pentacene-based Nanotube Displaying Enriched Electrochemical and Photochemical Activities

Unlike previously well-studied, acyclic pentacene oligomers, the first synthesis of a cyclic pentacene trimer with a fixed tubular conformation is reported. A short-step synthesis starting from common pentacenequinone yielded the target molecule with a 1.5 nanometer length and a subnanometer pore. Steady-state spectroscopic analyses revealed that the close proximity of the non-conjugated, three pentacene chromophores allows the nanotube to display stepwise electrochemical/chemical oxidation characteristics. Furthermore, time-resolved transient absorption measurements elucidated the generation of an excited triplet state of the nanotube, with high quantum yield reaching about 180 % through intramolecular singlet fission and a very long triplet lifetime.