Enhanced functions of human embryonic stem cell-derived hepatocyte-like cells on three-dimensional nanofibrillar surfaces

Stem Cell-Based Strategies: The Future Direction of Bioartificial Liver Development

Acute liver failure (ALF) results from severe liver damage or end-stage liver disease. It is extremely fatal and causes serious health and economic burdens worldwide. Once ALF occurs, liver transplantation (LT) is the only definitive and recommended treatment; however, LT is limited by the scarcity of liver grafts. Consequently, the clinical use of bioartificial liver (BAL) has been proposed as a treatment strategy for ALF. Human primary hepatocytes are an ideal cell source for these methods. However, their high demand and superior viability prevent their widespread use. Hence, finding alternatives that meet the seed cell quality and quantity requirements is imperative. Stem cells with self-renewing, immunogenic, and differentiative capacities are potential cell sources. MSCs and its secretomes encompass a spectrum of beneficial properties, such as anti-inflammatory, immunomodulatory, anti-ROS (reactive oxygen species), anti-apoptotic, pro-metabolomic, anti-fibrogenesis, and pro-regenerative attributes. This review focused on the recent status and future directions of stem cell-based strategies in BAL for ALF. Additionally, we discussed the opportunities and challenges associated with promoting such strategies for clinical applications.

Stem cell culture and differentiation in 3-D scaffolds

Conventional two-dimensional (2-D) cultivation are easy to utilize for human pluripotent stem (hPS) cell cultivation in standard techniques and are important for analysis or development of the signal pathways to keep pluripotent state of hPS cells cultivated on 2-D cell culture materials. However, the most efficient protocol to prepare hPS cells is the cell culture in a three dimensional (3-D) cultivation unit because huge numbers of hPS cells should be utilized in clinical treatment. Some 3-D cultivation strategies for hPS cells are considered: (a) microencapsulated cell cultivation in suspended hydrogels, (b) cell cultivation on microcarriers (MCs), (c) cell cultivation on self-aggregated spheroid [cell aggregates; embryoid bodies (EBs) and organoids], (d) cell cultivation on microfibers or nanofibers, and (e) cell cultivation in macroporous scaffolds. These cultivation ways are described in this chapter.

Multicellular Liver Organoids: Generation and Importance of Diverse Specialized Cellular Components

Over 40,000 patients in the United States are estimated to suffer from end-stage liver disease and acute hepatic failure, for which liver transplantation is the only available therapy. Human primary hepatocytes (HPH) have not been employed as a therapeutic tool due to the difficulty in growing and expanding them in vitro, their sensitivity to cold temperatures, and tendency to dedifferentiate following two-dimensional culture. The differentiation of human-induced pluripotent stem cells (hiPSCs) into liver organoids (LO) has emerged as a potential alternative to orthotropic liver transplantation (OLT). However, several factors limit the efficiency of liver differentiation from hiPSCs, including a low proportion of differentiated cells capable of reaching a mature phenotype, the poor reproducibility of existing differentiation protocols, and insufficient long-term viability in vitro and in vivo. This review will analyze various methodologies being developed to improve hepatic differentiation from hiPSCs into liver organoids, paying particular attention to the use of endothelial cells as supportive cells for their further maturation. Here, we demonstrate why differentiated liver organoids can be used as a research tool for drug testing and disease modeling, or employed as a bridge for liver transplantation following liver failure.

Biopolymer Honeycomb Microstructures: A Review

In this review, we present a comprehensive summary of the formation of honeycomb microstructures and their applications, which include tissue engineering, antibacterial materials, replication processes or sensors. The history of the honeycomb pattern, the first experiments, which mostly involved the breath figure procedure and the improved phase separation, the most recent approach to honeycomb pattern formation, are described in detail. Subsequent surface modifications of the pattern, which involve physical and chemical modifications and further enhancement of the surface properties, are also introduced. Different aspects influencing the polymer formation, such as the substrate influence, a particular polymer or solvent, which may significantly contribute to pattern formation, and thus influence the target structural properties, are also discussed.

MicroRNAs: Crucial Players in the Differentiation of Human Pluripotent and Multipotent Stem Cells into Functional Hepatocyte-Like Cells

Hepatic disease negatively impacts liver function and metabolism. Primary human hepatocytes are the gold standard for the prediction and successful treatment of liver disease. However, the sources of hepatocytes for drug toxicity testing and disease modeling are limited. To overcome this issue, pluripotent stem cells (PSCs) have emerged as an alternative strategy for liver disease therapy. Human PSCs, including embryonic stem cells (ESC) and induced pluripotent stem cells (iPSC) can self-renew and give rise to all cells of the body. Human PSCs are attractive cell sources for regenerative medicine, tissue engineering, drug discovery, and developmental studies. Several recent studies have shown that mesenchymal stem cells (MSCs) can also differentiate (or trans-differentiate) into hepatocytes. Differentiation of human PSCs and MSCs into functional hepatocyte-like cells (HLCs) opens new strategies to study genetic diseases, hepatotoxicity, infection of hepatotropic viruses, and analyze hepatic biology. Numerous in vitro and in vivo differentiation protocols have been established to obtain human PSCs/MSCs-derived HLCs and mimic their characteristics. It was recently discovered that microRNAs (miRNAs) play a critical role in controlling the ectopic expression of transcription factors and governing the hepatocyte differentiation of human PSCs and MSCs. In this review, we focused on the role of miRNAs in the differentiation of human PSCs and MSCs into hepatocytes.

Small Molecule Differentiate PDX1-Expressing Cells Derived from Human Endometrial Stem Cells on PAN Electrospun Nanofibrous Scaffold: Applications for the Treatment of Diabetes in Rat

In this study, we designed an engineered tissue and transplanted it to an animal model, trying to take an effective step toward meeting the needs of diabetic patients. Here, human endometrial cells were differentiated into PDX1-expressing cells using a small molecule of Y-27632 on polyacrylonitrile (PAN) electrospun scaffolds and transplanted into diabetic rats. PAN nanofibers were made by electrospinning. RT-PCR and immunocytochemical analysis were performed to express pancreatic precursor (PP) genes. The differentiated cells were then transplanted into the abdominal cavity of diabetic rats with Streptozotocin. In another group of rats, differentiated cells were injected through the tail. Blood glucose was measured 7, 14, and 28 days after transplantation, and rat weight was also measured. The results showed that the expression of PP markers including Sox-17, Ngn3, Pdx1, and NKx2.2 genes was significantly increased in differentiated cells compared to the control group. In diabetic rats receiving differentiated cells, both transplanted and injected, glucose concentration as well as body weight improved compared to the control group. Rats receiving transplants in the peritoneum had a lower blood glucose concentration than those in the cell receiving group by injection, and the cell receiving group in the form of injections was more effective in increasing the body weight of rats than in the other groups. According to the results of the study, the transplantation of PP from endometrium using PAN scaffolding at the site of peritoneum could be recommended for the treatment of diabetes, although further studies are needed to provide a complete cure.

A co-culture nanofibre scaffold model of neural cell degeneration in relevance to Parkinson's disease

Current therapeutic strategies for Parkinson’s disease (PD) aim to delay progression or replace damaged neurons by restoring the original neuronal structures. The poor regenerative capacity of neural tissue highlights the need for the development of cellular environments to model the pathogenesis of PD. In the current work, we have characterised the growth, survival and response to PD mimetics of human SH-SY5Y neuroblastoma and U-87MG glioblastoma cell lines cultured on polyacrylonitrile (PAN) and Jeffamine® doped polyacrylonitrile (PJ) nano-scaffolds. Differentiation induced by a range of agents was evaluated by immunoassays of neural protein biomarkers. PAN and PJ nanofibre scaffolds provided suitable three-dimensional (3D) environment to support the growth, differentiation and network formation of dopaminergic neuron- and astrocyte-like cell populations, respectively. The scaffolds selectively supported the survival and differentiation of both cell populations with prolonged neuronal survival when exposed to PD mimetics in the presence of astrocytes in a co-culture model. Such 3D nanoscaffold-based assays could aid our understanding of the molecular basis of PD mimetic-induced Parkinsonism and the discovery of neuroprotective agents.

The importance of transporters and cell polarization for the evaluation of human stem cell-derived hepatic cells

One of the most promising applications of human pluripotent stem cells is their utilization for human-based pharmacological models. Despite the fact that membrane transporters expressed in the liver play pivotal role in various hepatic functions, thus far only little attention was devoted to the membrane transporter composition of the stem cell-derived liver models. In the present work, we have differentiated HUES9, a human embryonic stem cell line, toward the hepatic lineage, and monitored the expression levels of numerous differentiation marker and liver transporter genes with special focus on ABC transporters. In addition, the effect of bile acid treatment and polarizing culturing conditions on hepatic maturation has been assessed. We found that most transporter genes crucial for hepatic functions are markedly induced during hepatic differentiation; however, as regards the transporter composition the end-stage cells still exhibited dual, hepatocyte and cholangiocyte character. Although the bile acid treatment and sandwich culturing only slightly influenced the gene expressions, the stimulated cell polarization resulted in formation of bile canaliculi and proper localization of transporters. Our results point to the importance of membrane transporters in human stem cell-derived hepatic models and demonstrate the relevance of cell polarization in generation of applicable cellular models with correctly localized transporters. On the basis of our observations we suggest that conventional criteria for the evaluation of the quality of stem cell-derived hepatocyte-like cells ought to be augmented with additional elements, such as polarized and functional expression of hepatic transporters.

Electrospun Nanofibers for Diabetes: Tissue Engineering and Cell-Based Therapies

Diabetes mellitus is an autoimmune disease which causes loss of insulin secretion producing hyperglycemia by promoting progressive destruction of pancreatic β cells. An ideal therapeutic approach to manage diabetes mellitus is pancreatic β cells replacement. The aim of this review article was to evaluate the role of nanofibrous scaffolds and stem cells in the treatment of diabetes mellitus. Various studies have pointed out that application of electrospun biomaterials has considerably attracted researchers in the field of tissue engineering. The principles of cell therapy for diabetes have been reviewed in the first part of this article, while the usability of tissue engineering as a new therapeutic approach is discussed in the second part.

Enhanced hepatic differentiation of human amniotic epithelial cells on polyethylene glycol-linked multiwalled carbon nanotube-coated hydrogels

Polyethylene glycol-linked multiwalled carbon nanotube-coated poly-acrylamide hydrogel (CNT-PA) was customized to mimic human liver stiffness and nanostructured surface in liver cells for modulating differentiation of human amniotic epithelial cells (hAECs) into functional hepatocyte-like cells (HLCs) in vitro. This composite of CNT-PA matrix enhanced the hepatic differentiation of hAECs into HLCs with suppression of pluripotent markers and up-regulation of hepatic markers at both transcript and protein levels. Furthermore, the HLCs on CNT-PA demonstrated hepatocytic functions in terms of albumin secretion, higher uptake of indocyanine green, and comparable CYP3A4 enzymatic function and inducibility when matched against HepG2 cells. Taken together, CNT-PA provides an efficient and scalable platform for the expansion of HLCs from hAECs and could be explored further for downstream development.

Developing a Cost-Effective and Scalable Production of Human Hepatic Competent Endoderm from Size-Controlled Pluripotent Stem Cell Aggregates

Dynamic suspension culture of human pluripotent stem cells (hPSCs) in stirred bioreactors provides a valuable scalable culture platform for integrated differentiation toward different lineages for potential research and therapeutic applications. However, current protocols for scalable and integrated differentiation of hPSCs limited due to high cost of growth factors and technical challenges. Here, hPSCs aggregates primed with 6 and 12 μM of CHIR99021 (CHIR), a Wnt agonist, in combination with different concentrations of high cost Activin A (10, 25, 50, 100 ng/mL). We sought to determine the appropriate treatment duration for efficient and cost-effective differentiation protocol for foregut definitive endoderm production in a dynamic suspension culture. Afterward, we evaluated the impact of the initial hPSC aggregate sizes (small: 86 ± 18 μm; medium: 142 ± 32 μm; large: 214 ± 34 μm) as critical bioprocess parameter on differentiation efficacy at the beginning of induction. The results indicated that 1-day priming of hPSCs as 3D aggregates (hPSpheres) with 6 μM CHIR followed by treatment with a low concentration of Activin (10 ng/mL) for 2 days resulted in efficient differentiation to definitive endoderm. This finding confirmed by the presence of ≥70% SOX17/FOXA2-double positive cells that highly expressed the anterior endodermal marker HEX. These endodermal cells differentiated efficiently into mature functional hepatocytes [60% albumin (ALB)-positive cells]. The results showed that the initial size of hPSC aggregates significantly impacted on the efficacy of differentiation. The medium sized-hPSpheres resulted in higher productivity and differentiation efficiency for scalable hepatocytes production, whereas small aggregates resulted in significant cell-loss after CHIR treatment and large aggregates had less efficacious endodermal differentiation. Differentiated cells exhibited multiple characteristics of primary hepatocytes as evidenced by expressions of liver-specific markers, indocyanine green and low-density lipoprotein uptake, and glycogen storage. Thus, this platform could be employed for scalable production of hPSC-derived hepatocytes for clinical and drug discovery applications.

Tissue engineering; strategies, tissues, and biomaterials

Current tissue regenerative strategies rely mainly on tissue repair by transplantation of the synthetic/natural implants. However, limitations of the existing strategies have increased the demand for tissue engineering approaches. Appropriate cell source, effective cell modification, and proper supportive matrices are three bases of tissue engineering. Selection of appropriate methods for cell stimulation, scaffold synthesis, and tissue transplantation play a definitive role in successful tissue engineering. Although the variety of the players are available, but proper combination and functional synergism determine the practical efficacy. Hence, in this review, a comprehensive view of tissue engineering and its different aspects are investigated.

Breath figures in tissue engineering and drug delivery: State-of-the-art and future perspectives

The breath figure (BF) method is an easy, low-cost method to prepare films with a highly organized honeycomb-like porous surface. The particular surface topography and porous nature of these materials makes them valuable substrates for studying the complex effects of topography on cell fate, and to produce biomimetic materials with high performance in tissue engineering. Numerous researchers over the last two decades have studied the effects of the honeycomb topography on a variety of primary and immortalized cell lines, and drew important conclusions that can be translated to the construction of optimal biomaterials for cell culture. The literature also encouragingly shows the potential of honeycomb films to induce differentiation of stem cells down a specific lineage without the need for biochemical stimuli. Here, we review the main studies where BF honeycomb films are used as substrates for tissue engineering applications. Furthermore, we highlight the numerous advantages of the porous nature of the films, such as the enhanced, spatially controlled adsorption of proteins, the topographical cues influencing cellular behavior, and the enhanced permeability which is essential both in vitro and in vivo. Finally, this review highlights the elegant use of honeycomb films as drug-eluting biomaterials or as reservoirs for distinct drug delivery systems.

STATEMENT OF SIGNIFICANCE

Combining biocompatible surfaces and 3D nano/microscale topographies, such as pores or grooves, is an effective strategy for manufacturing tissue engineering scaffolds. The breath figure (BF) method is an easy technique to prepare cell culture substrates with an organized, honeycomb-like porous surface. These surface features make these scaffolds valuable for studying how the cells interact with the biomaterials. Their unique surface topography can also resemble the natural environment of the tissues in the human body. For that reason, numerous studies, using different cell types, have shown that honeycomb films can constitute high performance substrates for cell culture. Here, we review those studies, we highlight the advantages of honeycomb films in tissue engineering and we discuss their potential as unique drug-eluting systems.

Tissue Engineering Approaches in the Design of Healthy and Pathological In Vitro Tissue Models

In the tissue engineering (TE) paradigm, engineering and life sciences tools are combined to develop bioartificial substitutes for organs and tissues, which can in turn be applied in regenerative medicine, pharmaceutical, diagnostic, and basic research to elucidate fundamental aspects of cell functions in vivo or to identify mechanisms involved in aging processes and disease onset and progression. The complex three-dimensional (3D) microenvironment in which cells are organized in vivo allows the interaction between different cell types and between cells and the extracellular matrix, the composition of which varies as a function of the tissue, the degree of maturation, and health conditions. In this context, 3D in vitro models can more realistically reproduce a tissue or organ than two-dimensional (2D) models. Moreover, they can overcome the limitations of animal models and reduce the need for in vivo tests, according to the "3Rs" guiding principles for a more ethical research. The design of 3D engineered tissue models is currently in its development stage, showing high potential in overcoming the limitations of already available models. However, many issues are still opened, concerning the identification of the optimal scaffold-forming materials, cell source and biofabrication technology, and the best cell culture conditions (biochemical and physical cues) to finely replicate the native tissue and the surrounding environment. In the near future, 3D tissue-engineered models are expected to become useful tools in the preliminary testing and screening of drugs and therapies and in the investigation of the molecular mechanisms underpinning disease onset and progression. In this review, the application of TE principles to the design of in vitro 3D models will be surveyed, with a focus on the strengths and weaknesses of this emerging approach. In addition, a brief overview on the development of in vitro models of healthy and pathological bone, heart, pancreas, and liver will be presented.

Biomaterials and Culture Technologies for Regenerative Therapy of Liver Tissue

Regenerative approach has emerged to substitute the current extracorporeal technologies for the treatment of diseased and damaged liver tissue. This is based on the use of biomaterials that modulate the responses of hepatic cells through the unique matrix properties tuned to recapitulate regenerative functions. Cells in liver preserve their phenotype or differentiate through the interactions with extracellular matrix molecules. Therefore, the intrinsic properties of the engineered biomaterials, such as stiffness and surface topography, need to be tailored to induce appropriate cellular functions. The matrix physical stimuli can be combined with biochemical cues, such as immobilized functional groups or the delivered actions of signaling molecules. Furthermore, the external modulation of cells, through cocultures with nonparenchymal cells (e.g., endothelial cells) that can signal bioactive molecules, is another promising avenue to regenerate liver tissue. This review disseminates the recent approaches of regenerating liver tissue, with a focus on the development of biomaterials and the related culture technologies.

Transplantation of hESC-derived hepatocytes protects mice from liver injury

Background

Hepatic cell therapy has become a viable alternative to liver transplantation for life-threatening liver diseases. However, the supply of human hepatocytes is limited due to the shortage of suitable donor organs required to isolate high-quality cells. Human pluripotent stem cells reflect a potential renewable source for generating functional hepatocytes. However, most differentiation protocols use undefined matrices or factors of animal origin; as such, the resulting hepatocytes are not Good Manufacturing Practice compliant. Moreover, the preclinical studies employed to assess safety and function of human embryonic stem cell (hESC)-derived hepatocytes are generally limited to immunodeficient mice. In the present study, we evaluate the generation of hepatocytes under defined conditions using a European hESC line (VAL9) which was derived under animal-free conditions. The function capacity of VAL9-derived hepatocytes was assessed by transplantation into mice with acetaminophen-induced acute liver failure, a clinically relevant model.

Methods

We developed a protocol that successfully differentiates hESCs into bipotent hepatic progenitors under defined conditions, without the use of chromatin modifiers such as dimethyl sulphoxide. These progenitors can be cryopreserved and are able to generate both committed precursors of cholangiocytes and neonate-like hepatocytes.

Results

Thirty days post-differentiation, hESCs expressed hepatocyte-specific markers such as asialoglycoprotein receptor and hepatic nuclear factors including HNF4α. The cells exhibited properties of mature hepatocytes such as urea secretion and UGT1A1 and cytochrome P450 activities. When transplanted into mice with acetaminophen-induced acute liver failure, a model of liver damage, the VAL9-derived hepatocytes efficiently engrafted and proliferated, repopulating up to 10 % of the liver. In these transplanted livers, we observed a significant decrease of liver transaminases and found no evidence of tumourigenicity. Thus, VAL9-derived hepatocytes were able to rescue hepatic function in acetaminophen-treated animals.

Conclusions

Our study reveals an efficient protocol for differentiating VAL9 hESCs to neonatal hepatocytes which are then able to repopulate livers in vivo without tumour induction. The human hepatocytes are able to rescue liver function in mice with acetaminophen-induced acute toxicity. These results provide proof-of-concept that replacement therapies using hESC-derived hepatocytes are effective for treating liver diseases.

Electronic supplementary material

The online version of this article (doi:10.1186/s13287-015-0227-6) contains supplementary material, which is available to authorized users.

Engraftment of human induced pluripotent stem cell-derived hepatocytes in immunocompetent mice via 3D co-aggregation and encapsulation

Cellular therapies for liver diseases and in vitro models for drug testing both require functional human hepatocytes (Hum-H), which have unfortunately been limited due to the paucity of donor liver tissues. Human pluripotent stem cells (hPSCs) represent a promising and potentially unlimited cell source to derive Hum-H. However, the hepatic functions of these hPSC-derived cells to date are not fully comparable to adult Hum-H and are more similar to fetal ones. In addition, it has been challenging to obtain functional hepatic engraftment of these cells with prior studies having been done in immunocompromised animals. In this report, we demonstrated successful engraftment of human induced pluripotent stem cell (iPSC)-derived hepatocyte-like cells (iPS-H) in immunocompetent mice by pre-engineering 3D cell co-aggregates with stromal cells (SCs) followed by encapsulation in recently developed biocompatible hydrogel capsules. Notably, upon transplantation, human albumin and α1-antitrypsin (A1AT) in mouse sera secreted by encapsulated iPS-H/SCs aggregates reached a level comparable to the primary Hum-H/SCs control. Further immunohistochemistry of human albumin in retrieved cell aggregates confirmed the survival and function of iPS-H. This proof-of-concept study provides a simple yet robust approach to improve the engraftment of iPS-H, and may be applicable to many stem cell-based therapies.

Differential effect of Activin A and WNT3a on definitive endoderm differentiation on electrospun nanofibrous PCL scaffold

The first step in the formation of hepatocytes and beta cells is the generation of definitive endoderm (DE) which involves a central issue in developmental biology. Human induced pluripotent stem cells (hiPSCs) have the pluripotency to differentiate into all three germ layers in vitro and have been considered potent candidates for regenerative medicine as an unlimited source of cells for therapeutic applications. In this study, we investigated the differentiating potential of hiPSCs on poly (ε-caprolactone) (PCL) nanofibrous scaffold into DE cells. Here, we demonstrate directed differentiation of hiPSCs by factors such as Activin A and Wnt3a. The differentiation was determined by immunofluoresence staining with Sox17, FoxA2 and Goosecoid (Gsc) and also by qRT-PCR analysis. The results of this study showed that hiPSCs, as a new cell source, have the ability to differentiate into DE cells with a high capacity and also demonstrate that three dimension (3D) culture provides a suitable nanoenviroment for growth, proliferation and differentiation of hiPSCs. PCL nanofibrous scaffold with essential supplements, stimulating factors and EB-derived cells is able to provide a novel method for enhancing functional differentiation of hiPSCs into DE cells.

Physical cues of cell culture materials lead the direction of differentiation lineages of pluripotent stem cells

Differentiation methods of hPSCs into specific cell lineages. Differentiation of hPSCsviaEB formation (types AB, A–D) or without EB formation (types E–H).

Engrafted human stem cell-derived hepatocytes establish an infectious HCV murine model

The demonstrated ability to differentiate both human embryonic stem cells (hESCs) and patient-derived induced pluripotent stem cells (hiPSCs) into hepatocyte-like cells (HLCs) holds great promise for both regenerative medicine and liver disease research. Here, we determined that, despite an immature phenotype, differentiated HLCs are permissive to hepatitis C virus (HCV) infection and mount an interferon response to HCV infection in vitro. HLCs differentiated from hESCs and hiPSCs could be engrafted in the liver parenchyma of immune-deficient transgenic mice carrying the urokinase-type plasminogen activator gene driven by the major urinary protein promoter. The HLCs were maintained for more than 3 months in the livers of chimeric mice, in which they underwent further maturation and proliferation. These engrafted and expanded human HLCs were permissive to in vivo infection with HCV-positive sera and supported long-term infection of multiple HCV genotypes. Our study demonstrates efficient engraftment and in vivo HCV infection of human stem cell-derived hepatocytes and provides a model to study chronic HCV infection in patient-derived hepatocytes, action of antiviral therapies, and the biology of HCV infection.

Differentiation of human embryonic stem cells to hepatocyte-like cells on a new developed xeno-free extracellular matrix

Human embryonic stem cells (hESCs) provide a new source for hepatocyte production in translational medicine and cell replacement therapy. The reported hESC-derived hepatocyte-like cells (HLCs) were commonly generated on Matrigel, a mouse cell line-derived extracellular matrix (ECM). Here, we performed the hepatic lineage differentiation of hESCs following a stepwise application of growth factors on a newly developed serum- and xeno-free, simple and cost-benefit ECM, designated "RoGel," which generated from a modified conditioned medium of human fibroblasts. In comparison with Matrigel, the differentiated HLCs on both ECMs expressed similar levels of hepatocyte-specific genes, secreted α-fetoprotein, and metabolized ammonia, showed glycogen storage activity as well as low-density lipoprotein and indocyanine green uptake. The transplantation of hESC-HLCs into the carbon tetrachloride-injured liver demonstrated incorporation of the cells into the host mouse liver and the expression of albumin. The results suggest that the xeno-free and cost-benefit matrix may be applicable in bioartificial livers and also may facilitating a clinical application of human pluripotent stem cell-derived hepatocytes in the future.

Nanotechnology in the regulation of stem cell behavior

Stem cells are known for their potential to repair damaged tissues. The adhesion, growth and differentiation of stem cells are likely controlled by the surrounding microenvironment which contains both chemical and physical cues. Physical cues in the microenvironment, for example, nanotopography, were shown to play important roles in stem cell fate decisions. Thus, controlling stem cell behavior by nanoscale topography has become an important issue in stem cell biology. Nanotechnology has emerged as a new exciting field and research from this field has greatly advanced. Nanotechnology allows the manipulation of sophisticated surfaces/scaffolds which can mimic the cellular environment for regulating cellular behaviors. Thus, we summarize recent studies on nanotechnology with applications to stem cell biology, including the regulation of stem cell adhesion, growth, differentiation, tracking and imaging. Understanding the interactions of nanomaterials with stem cells may provide the knowledge to apply to cell-scaffold combinations in tissue engineering and regenerative medicine.

Enhanced stem cell pluripotency in surface-modified electrospun fibrous matrices

A previously screened "hit chemistry" (N-[3-(dimethylamino)propyl] methacrylamide) that supports strong attachment and long-term self-renewal of ES cells is selected and grafted to poly(ether sulfone) (PES) fibrous matrices through plasma-induced graft polymerization. The 3D modified fibers exhibit higher cell proliferation and greater expression of pluripotency markers of mouse ES cells than 2D membranes. It is the first demonstration of scaling up an optimal synthetic surface chemistry in 2D using a high throughput synthesis, screening, and selection method to 3D that strongly influences pluripotent stem cell growth.

Embryonic and induced pluripotent stem cells: understanding, creating, and exploiting the nano-niche for regenerative medicine

Embryonic stem cells (ESCs) and induced pluripotent stem cells (iPSCs) have the capacity to differentiate into any specialized cell type of the human body, and therefore, ESC/iPSC-derived cell types offer great potential for regenerative medicine. However, key to realizing this potential requires a strong understanding of stem cell biology, techniques to maintain stem cells, and strategies to manipulate cells to efficiently direct cell differentiation toward a desired cell type. As nanoscale science and engineering continues to produce novel nanotechnology platforms, which inform, infiltrate, and impinge on many aspects of everyday life, it is no surprise that stem cell research is turning toward developments in nanotechnology to answer research questions and to overcome obstacles in regenerative medicine. Here we discuss recent advances in ESC and iPSC manipulation using nanomaterials and highlight future challenges within this area of research.

Behavior of mouse spermatogonial stem-like cells on an electrospun nanofibrillar matrix

PURPOSE

Spermatogonial stem cells are affected by the interactions of extrinsic signals produced by components of the microenvironment niche, in addition to the chemical and physical properties of the extracellular matrix. Therefore, this study was initiated to assess the interaction of these cells on a synthetic nanofibrillar extracellular matrix that mimicked the geometry and nanotopography of the basement membrane for cellular growth.

METHODS

This study has used a variety of experimental approaches to investigate the interaction of mouse neonatal-derived spermatogonial stem-like cells on a synthetic random oriented three-dimensional nanofibrillar matrix composed of electrospun polyamide nanofibers (Ultra-Web™).

RESULTS

Spermatogonial stem-like cell colonies were characterized by their ability to express α6-integrin, Thy-1, PLZF, and β1-integrin. After culture of cells on the nanofibrillar surfaces for 7 days, the number of colonies, the number of cells in each colony, and the average area of colonies were increased (P < 0.05). However, the expression difference of related markers in both groups was not significant. A significantly higher proliferation and survival was observed in the nanofibrillar group (P < 0.05). After transplantation into the testes of busulfan-treated adult mice, spermatogonial stem-like cell colonies that were cultured on the nanofibrillar surface demonstrated functionality, as verified by their ability to migrate to the seminiferous basal membrane, where they produced additional colonies.

CONCLUSIONS

These results have suggested that electrospun nanofibrillar surfaces could provide a more favorable microenvironment for in vitro short term culture of spermatogonial stem-like cell colonies.

Stem cell and tissue engineering research in the Islamic republic of Iran

During the last few years, the Islamic republic of Iran has consistently grown in nearly all scientific fields and achieved considerable success in producing science and developing technology. The Iranian government and scientific community have jointly started programs to support the creation of new scientific opportunities and technology platforms for research in the domain of stem cell and tissue engineering. In addition, clinical translation of basic researches in the fields of stem cell and regenerative medicine has been amongst the top priorities. Interestingly, the public sector, media, and authorities are also actively monitoring these attainments. In spite of this nationwide interest, however, there is currently a dearth of analytical information on these accomplishments. To address this issue, here we introduce the key decisions made by the country's policy makers and also review some of the Iranian researchers' publications in this field.

Advances in cell sources of hepatocytes for bioartificial liver

BACKGROUND

Orthotopic liver transplantation (OLT) is the most effective therapy for liver failure. However, OLT is severely limited by the shortage of liver donors. Bioartificial liver (BAL) shows great potential as an alternative therapy for liver failure. In recent years, progress has been made in BAL regarding genetically engineered cell lines, immortalized human hepatocytes, methods for preserving the phenotype of primary human hepatocytes, and other functional hepatocytes derived from stem cells.

DATA SOURCES

A systematic search of PubMed and ISI Web of Science was performed to identify relevant studies in English language literature using the key words such as liver failure, bioartificial liver, hepatocyte, stem cells, differentiation, and immortalization. More than 200 articles related to the cell sources of hepatocyte in BAL were systematically reviewed.

RESULTS

Methods for preserving the phenotype of primary human hepatocytes have been successfully developed. Many genetically engineered cell lines and immortalized human hepatocytes have also been established. Among these cell lines, the incorporation of BAL with GS-HepG2 cells or alginate-encapsulated HepG2 cells could prolong the survival time and improve pathophysiological parameters in an animal model of liver failure. The cBAL111 cells were evaluated using the AMC-BAL bioreactor, which could eliminate ammonia and lidocaine, and produce albumin. Importantly, BAL loading with HepLi-4 cells could significantly improve the blood biochemical parameters, and prolong the survival time in pigs with liver failure. Other functional hepatocytes differentiated from stem cells, such as human liver progenitor cells, have been successfully achieved.

CONCLUSIONS

Aside from genetically modified liver cell lines and immortalized human hepatocytes, other functional hepatocytes derived from stem cells show great potential as cell sources for BAL. BAL with safe and effective liver cells may be achieved for clinical liver failure in the near future.

Cells and materials for liver tissue engineering

Liver transplantation is currently the most efficacious treatment for end-stage liver diseases. However, one main problem with liver transplantation is the limited number of donor organs that are available. Therefore, liver tissue engineering based on cell transplantation that combines materials to mimic the liver is under investigation with the goal of restoring normal liver functions. Tissue engineering aims to mimic the interactions among cells with a scaffold. Particular materials or a matrix serve as a scaffold and provide a three-dimensional environment for cell proliferation and interaction. Moreover, the scaffold plays a role in regulating cell maturation and function via these interactions. In cultures of hepatic lineage cells, regulation of cell proliferation and specific function using biocompatible synthetic, biodegradable bioderived matrices, protein-coated materials, surface-modified nanofibers, and decellularized biomatrix has been demonstrated. Furthermore, beneficial effects of addition of growth factor cocktails to a flow bioreactor or coculture system on cell viability and function have been observed. In addition, a system for growing stem cells, liver progenitor cells, and primary hepatocytes for transplantation into animal models was developed, which produces hepatic lineage cells that are functional and that show long-term proliferation following transplantation. The major limitation of cells proliferated with matrix-based transplantation systems is the high initial cell loss and dysfunction, which may be due to the absence of blood flow and the changes in nutrients. Thus, the development of vascular-like scaffold structures, the formation of functional bile ducts, and the maintenance of complex metabolic functions remain as major problems in hepatic tissue engineering and will need to be addressed to enable further advances toward clinical applications.

Generation of functional hepatic cells from pluripotent stem cells

Liver diseases affect millions of people worldwide, especially in developing country. According to the American Liver Foundation, nearly 1 in every 10 Americans suffers from some form of liver disease. Even though, the liver has great ability to self-repair, in end-stage liver diseases including fibrosis, cirrhosis, and liver cancer induced by viral hepatitis and drugs, the liver regenerative capacity is exhausted. The only successful treatment for chronic liver failure is the whole liver transplantation. More recently, some clinical trials using hepatocyte transplantation have shown some clinical improvement for metabolic liver diseases and acute liver failure. However, the shortage of donor livers remains a life-threatening challenge in liver disease patients. To overcome the scarcity of donor livers, hepatocytes generated from embryonic stem cell or induced pluripotent stem cell differentiation cultures could provide an unlimited supply of such cells for transplantation. This review provides an updated summary of hepatic differentiation protocols published so far, with a characterization of the hepatic cells generated in vitro and their ability to regenerate damaged livers in vivo following transplantation in pre-clinical liver deficient mouse models.

Bioengineering embryonic stem cell microenvironments for the study of breast cancer

Breast cancer is the most prevalent disease amongst women worldwide and metastasis is the main cause of death due to breast cancer. Metastatic breast cancer cells and embryonic stem (ES) cells display similar characteristics. However, unlike metastatic breast cancer cells, ES cells are nonmalignant. Furthermore, embryonic microenvironments have the potential to convert metastatic breast cancer cells into a less invasive phenotype. The creation of in vitro embryonic microenvironments will enable better understanding of ES cell-breast cancer cell interactions, help elucidate tumorigenesis, and lead to the restriction of breast cancer metastasis. In this article, we will present the characteristics of breast cancer cells and ES cells as well as their microenvironments, importance of embryonic microenvironments in inhibiting tumorigenesis, convergence of tumorigenic and embryonic signaling pathways, and state of the art in bioengineering embryonic microenvironments for breast cancer research. Additionally, the potential application of bioengineered embryonic microenvironments for the prevention and treatment of invasive breast cancer will be discussed.

Interactions of human embryonic stem cell-derived neural progenitors with an electrospun nanofibrillar surface in vitro

Stem cell technology combined with nano-scaffold surfaces provides a new tool for better induction involved in cell lineage differentiations and therefore for central nervous system repair. This study was undertaken to investigate appropriate neural cell-substrate interactions. Neural progenitors (NPs) were established from human embryonic stem cells (hESCs), as a first step, using an adherent system and a defined medium supplemented with a combination of factors. Next, the behavior of hESC-derived NPs (hESC-NPs) was evaluated on a synthetic, randomly oriented, three-dimensional nanofibrillar matrix composed of electrospun polyamide nanofibers (Ultra-Web™) using a variety of experimental approaches. We have demonstrated that homogenous, expandable, and self-renewable NPs can be easily generated from hESCs; they can express related markers Nestin, Sox1, and Pax6; and they can undergo multipotency differentiation to neurons and glials. Functionally, NPs cultured on nanofibers demonstrated an increase in the rate of migration, proliferation, morphology, and neurite length when compared with NPs cultured on two-dimensional culture surfaces. The results suggest that topographical features of the extracellular matrix of the cell environment have paved the way for a better understanding of human neuronal development, thus allowing for future clinical applications.