Polychlorinated dibenzo-p-dioxins, dibenzofurans and 'dioxin-like' PCBs in flue gas emissions from municipal waste management plants

Recent advances on dioxin and furan (dibenzofuran) based pollutants from analytical, environmental, and health perspectives

Dioxins and analogous derivatives pose significant concerns due to their impact on human health through both acute and prolonged exposures. They have the potential to resist natural degradation processes; therefore, they tend to accumulate in water, sediments, fish, meat, and human adipose tissue. As a result, concerns to both environmental and human health arise among the scientific community and environmental health organizers. Herein, we provide a comprehensive review highlighting recent findings of dioxin and furan pollution with a focus on major environmental and health aspects associated with the exposure to dioxin and its derivatives by assessing the routes of exposure, toxicity, and modes of action. Moreover, VOSviewer was used to understand the research interest within the scientific community in the study of dioxins and furans. Various strategies like remediation, methods of extraction and analysis, as well as protocols required to improve compound filtration and mineralization to enhance the efficiency of environmental cleanup processes.

Assessing the effect of COVID 19 lockdowns on the composition of organic compounds and potential source of PM2.5 in Hanoi, Vietnam

The ambient air quality during COVID-19 lockdowns has been improved in many cities in the world. This study is to assess the changes in persistent organic pollutants in PM2.5 during the COVID-19 lockdown in Hanoi. Individual organic species in PM2.5 ((e.g., polycyclic aromatic hydrocarbons (PAHs), polychlorobiphenyls (PCBs), and organochlorine pesticides (OCPs)) were measured in an urban residential area in Hanoi from before the March 10th to April 22nd, 2020, including before the partial lockdown (BL) and the partial lockdown (PL) phases. During the PL phase, the concentration of Σ14PAHs and Σ28PCBs was reduced by 38 and 52% compared with the BL period, respectively. The diagnostic ratio method implied that the sources of PAHs within the PL phase had a less effect on traffic and industrial activities than in the BL phase. The characteristic ratio method indicated that PCBs were mixed by commercial product and combustion process in both the BL and the PL periods, however, the source of PCBs in the BL phase was influenced by municipal waste incineration more than those in the PL phase. The decreasing concentration of Σ20OCPs during the partial lockdown was attributed to the restriction of human activities during the quarantine period. The results suggested that the source of OCPs was probably derived from the usage of pesticides in current and, historical degradation or the transportation of pesticides from the soil to the atmosphere.

Characterization of PCDD/F and dl-PCB levels in air in Gipuzkoa (Basque Country, Spain)

This research examines the levels and trends of pollutants, specifically 17 congeners of PCDD/Fs and 12 dl-PCBs, in the air measured in the province of Gipuzkoa (Basque Country, Spain). The study used PCDD/Fs, dl-PCB, and the sum of dioxin-like compounds as separate response variables. A total of 113 air samples were collected and analyzed using the method described in the European Standard (EN-1948:2006) from two industrial areas. The results were analyzed using non-parametric test to assess the variability of these pollutants based on different factors (year, season and day of the week) and General Linear Models to assess the weight of each factor. The study found that the toxic equivalents (TEQs) for PCDD/Fs were 12.29 fg TEQm^-3 and for dl-PCBs were 1.63 fg TEQm^-3, which were in a similar range or lower than those observed in other national and international studies in industrial areas. The results showed temporal variations, with higher levels of PCDD/Fs in autumn-winter than in spring-summer and higher levels of PCDD/Fs and dl-PCBs during weekdays than on weekends. The industrial area where the energy recovery plant (ERP) will be located had higher levels of air pollutants due to the presence of two PCDD/Fs emitting industries nearby, as indicated by the Spanish Registry of Polluting Emission Sources. Both industrial areas showed similar profiles of PCDD/Fs and dl-PCBs, with the PCDD/F profiles dominated by OCDD, 1,2,3,4,6,7,8-HpCDD, and 1,2,3,4,6,7,8-HpCDF in terms of concentrations and 1,2,3,7,8-PeCDD, 2,3,4,7,8-PeCDF, and 2,3,7,8-TCDD in terms of TEQs. The dl-PCB profiles were dominated by PCB 118, PCB 105, and PCB 77 in terms of concentrations and PCB 126 in terms of TEQs. The findings of this study can serve as an indicator of the potential impact of ERP on the health of the resident population and the environment.

Assessment of PCDD/Fs formation and emission characteristics at a municipal solid waste incinerator for one year

Municipal solid waste incineration (MSWI) has become a predominant emission source of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs). Research focusing on the impact of operating conditions, environmental changes, and operating time on the generation and emissions of PCDD/Fs has not been resolved. To this end, this study tracked and investigated the PCDD/Fs and 17 congener emissions of a typical grate incinerator (800 t/d) continuously for one year. Results showed that the PCDD/Fs concentration at the boiler outlet, stack inlet, and bag filter, including normal and abnormal operation conditions, ranges from 2.11E-02-41.86 ng I-TEQ/Nm³, 7.00E-04-6.76 ng I-TEQ/Nm³, and 1.12-2.90E+03 ng I-TEQ/Nm³, respectively. The 2,3,4,7,8-P₅CDF has the highest contribution in all samples, in which a proportion of TEQ ranged from 30 % to 77.73 %. Moreover, by applying the correlation analysis between PCDD/Fs and operating parameters, the emission characteristic is mainly affected by incinerators and boilers during the normal period, and it is affected by the whole MSWI process under abnormal conditions. In addition, the PCDD/Fs emission from the MSWI plant gradually increases from spring to winter. This study is beneficial for supporting the control of PCDD/Fs emission reduction and assisting the operators to optimize the relevant operating parameters of the MSWI plant to achieve a stable and up-to-substandard emissions during the operation period.

Long-term nationwide assessment of polychlorinated dibenzo-p-dioxins/dibenzofurans and dioxin-like polychlorinated biphenyls ambient air concentrations for ten years in South Korea

In this study, seasonal/regional variations of Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/DFs) and dioxin like-polychlorinated biphenyls in the ambient air were monitored for ten years (2008-2017) using a high volume air sampler. As a result of strict regulation enforced by Korea Ministry of Environment in 2008, PCDD/DFs concentrations in the ambient air decreased from 0.051 pg I-TEQ Sm^-3 in 2009 to 0.014 pg I-TEQ Sm^-3 in 2017 which was comparably associated with cut-down of their emission sources from 880.2 g I-TEQ Sm^-3 in 2001 to 24.2 g I-TEQ Sm^-3 in 2015; revealing that it was only 2.7% against that of 2001. In 2017, mean TEQ concentration level of PCDD/DFs in the air of South Korea was quite low in comparison to its ambient environmental standards of 0.6 pg I-TEQ Sm^-3 for PCDD/DFs. Particularly, the sum of PCDD/DFs in the background revealed the lowest level, however, the fraction of octachlorodibenzodioxin among other isomers exposed at the highest level in this study, suggesting that the ambient air quality in the background being studied was severely and persistently impaired by inflowing unknown sources of any possible anthropogenic transboundary migratory air pollutants. Moreover, this study conducted the scientific analysis of the long-term variations in the ambient air and emission sources using principal component analysis. From this of 10 years long-term nationwide assessments for the PCDD/DFs and dl-PCBs in the ambient air, it is possible to prove that South Korean environmental policy to manage POPs has been successfully conducted for the last ten years.

Variations of PCDD/Fs emissions from secondary nonferrous smelting plants and towards to their source emission reduction

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) are cancerogenic organic pollutants that priority controlled by Stockholm Convention with globally 183 signatories now. Secondary nonferrous smelting plants are confirmed to be important sources in China due to its large industrial activities and high emissions of PCDD/Fs. It is important to prioritize source to achieve source emission reduction by conducting field monitoring on typical case plants. Here, the emission profiles and levels of PCDD/Fs were investigated in 25 stack gas samples collected from three secondary copper production (SeCu), two secondary zinc production (SeZn) and two secondary lead production (SePb). Both average mass concentration and toxic equivalency quantity (TEQ) concentrations of PCDD/Fs all generally decreased in the order: SeCu > SeZn > SePb. It is noteworthy that the mean TEQ concentration in stack gas from SeCu with oxygen-enrich melting furnace technology, at 2.7 ng I-TEQ/Nm³, was much higher than the concentrations of other smelting processes. The average emission factors and annual release amounts of PCDD/Fs from SeCu, SePb and SeZn investigated were 28.4, 1.5, 10.4 μg I-TEQ/t and 1.03, 0.023, 0.17 g I-TEQ/year, respectively. The ratios of 2,3,7,8-TCDF to 1,2,3,7,8-PeCDF and OCDD to 1,2,3,7,8,9-HxCDD varied to large extent for three metal smelting, which could be used as diagnostic ratios of tracing specific PCDD/Fs sources. Addition of copper-containing sludge into the raw materials might lead to higher PCDD/Fs emissions. It is important to emphasize and reduce the PCDD/Fs emissions from oxygen-enrich melting furnace from secondary copper productions.

Role of Fe2O3 in fly ash surrogate on PCDD/Fs formation from 2-monochlorophenol

The correlation between the content and morphology of Fe₂O₃ and the yields of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) was studied in this work. Three fly ash surrogates containing 1%, 2.5%, and 4% of Fe₂O₃ were prepared and their effects on PCDD/Fs formation were investigated and compared to our previously studied 5% iron oxide sample using 2-monochlorophenol precursor model. As the intermediate of PCDD/Fs, environmentally persistent free radical formation propensity was correlated with the PCDD/Fs formation yields for different iron oxide samples. PCDD/Fs yield increases exponentially with the increasing iron content under pyrolytic conditions. On the contrary, low iron oxide content promotes oxidation and lowers yields of PCDD/Fs. Changing iron oxide clusters' morphology (crystallinity and cluster size) affects the mechanism of PCDD/Fs formation - on larger crystallites, a bidentate chemisorption of precursor is preferred leading to lower chlorinated congeners, while smaller clusters promote formation of PCDFs through mixed monodentate-bidentate surface species, resulting in formation of congeners with 1 chlorine more. This study further confirms the propensity of iron oxide to predominantly form PCDFs. The iron content also defines PCDDs:PCDFs ratio.

Characterization of PCDD/Fs and dl-PCBs emission from combustion of PCB-containing oil in a fluidized-bed incinerator

Emissions of PCDD/Fs and dl-PCBs from the combustion of PCB-containing oil in a hazardous waste incinerator are characterized. Flue gas samples are simultaneously taken at three points, including the outlet of ultrasonic wet scrubber, the outlet of heat exchanger and stack. In addition, solid matter samples including incinerator bottom ash, wet scrubber sludge, heat exchanger ash and baghouse ash are also collected. The results indicate that TEQ concentration (PCDD/Fs + dl-PCBs) measured in stack from the combustion of PCB-containing oil is 0.51 ng WHO-TEQ/Nm³. For the solid matter, PCDD/F and dl-PCB concentrations of baghouse ash and wet scrubber sludge are significantly higher than those measured in bottom and heat exchanger ashes. The total removal efficiencies of PCDD/Fs + dl-PCBs achieved with bag filtration (BF) + activated carbon injection (ACI) reaches 65.0%. The emission factors of PCDD/Fs and dl-PCBs from incinerating PCB-containing oil are 1.05 and 0.08 ng WHO-TEQ/L, respectively. The overall PCDD/Fs and dl-PCBs destruction efficiencies achieved with fluidized-bed incinerator reach 99.87% and 99.9998%, respectively, which demonstrates that incineration is an effective engineering practice for treating PCB-containing oil. Moreover, this is the first study suggesting the ratios of PCB-114/(PCB-126+ PCB-114) and PCB-157/(PCB-169+ PCB-157) as indicators to distinguish the emission source of dl-PCB from combustion process and technical mixture evaporation in diagnostic ratio analysis.

Characterization of PCDD/Fs and dioxin-like PCBs in flue gas from thermal industrial processes in Vietnam: A comprehensive investigation on emission profiles and levels

The emission profiles and levels of unintentionally produced persistent organic pollutants (U-POPs) comprising polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dl-PCBs) were comprehensively investigated in flue gas released from 20 facilities belonging to 11 thermal industrial processes in Vietnam. Levels and patterns of PCDD/Fs and dl-PCBs in flue gas samples varied widely between sectors and different facilities in the same sector, suggesting different formation mechanisms involved. Flue gas concentrations of PCDD/Fs and dl-PCBs generally decreased in the order: industrial waste incinerator > secondary zinc production > coal fired craft boiler > coal fired power plant ≈ medical waste incinerator > steel production ≈ cement production > secondary copper production > coal fired industrial boiler > secondary tin production ≈ municipal waste incinerator. Results obtained from diagnostic ratio and fingerprint analysis have revealed that the stack emissions of PCDD/Fs and dl-PCBs were probably attributed to the de novo formation and incomplete destruction of input materials containing technical PCB oils or paints. The average emission factors of PCDD/Fs and dl-PCBs ranged from 0.011 to 374 μg WHO-TEQ tonne^-1 for the studied facilities. A total emission amount of 4.89-11.4 g WHO-TEQ year^-1 was estimated for the 20 facilities investigated in our study. This is the first comprehensive investigation on the unintentional emissions of PCDD/Fs and dl-PCBs from a wide range of industrial sectors in Vietnam.

Emission of Unintentionally Produced Persistent Organic Pollutants from Some Industrial Processes in Northern Vietnam

Concentrations of PCDD/Fs, dioxin-like PCBs (dl-PCBs), PeCB and HCB were determined in flue gas, fly ash and bottom ash samples collected from brick production, steel production, and zinc production plants, an industrial waste incinerator and a medical waste incinerator in northern Vietnam to understand the contamination levels, accumulation patterns and extent of emission. Total TEQs concentrations of PCDD/Fs and dl-PCBs in flue gas and ash samples from these industrial plants ranged from 0.304 to 50.55 pg/Nm³ and 1.43 to 440 pg/g, respectively. PeCB and HCB residues in flue gas samples ranged from 0.839 to 46.59 ng/Nm³ and 1.16 to 60.5 ng/Nm³, respectively. The emission factors of 4.8-740 ngTEQs/tonne for PCDD/Fs and dl-PCBs, 67.12-240.7 µg/ton for PeCB and 11.64-889.3 µg/ton for HCB were obtained in flue gas samples. This is among the first reports on the emission factor of PCDD/Fs, dl-PCBs, PeCB, HCB in brick production, zinc production and waste incineration in Vietnam.

Atmospheric concentrations and gas-particle partitioning of PCDD/Fs and dioxin-like PCBs around Hochiminh city

Atmospheric PCDD/Fs and dl-PCBs samples were collected in Hochiminh city, Vietnam to address the effect of meteorological parameters, especially rainfall, on the occurrence and gas/particle partitioning of these persistent organic pollutants. The results indicate that PCDD/Fs and dl-PCBs concentrations in industrial site are higher than those measured in commercial and rural sites during both rainy and dry seasons. In terms of mass concentration, ambient PCDD/F levels measured in dry season are significantly higher than those measured in rainy season while dl-PCB levels do not vary significantly between rainy and dry seasons. The difference could be attributed to different gas/particle partitioning characteristics between PCDD/Fs and dl-PCBs. PCDD/Fs are found to be mainly distributed in particle phase while dl- PCBs are predominantly distributed in gas phase in both rainy and dry seasons. Additionally, Junge-Pankow and Harner-Bidleman models are applied to better understand the gas/particle partitioning of these pollutants in atmosphere. As a results, both PCDD/Fs and dl-PCBs are under non-equilibrium gas/particle partitioning condition, and PCDD/Fs tend to reach equilibrium easier in rainy season while there are no clear trend for dl-PCBs. Harner-Bidleman model performs better in evaluating the gas/particle partitioning of PCDD/Fs while Junge-Pankow model results in better prediction for dl-PCBs.

Polychlorinated dibenzo-P-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dl-PCBS) in bivalve mollusk from Galician Rías (N. W., SPAIN)

The concentrations of PCDD/Fs (2,3,7,8-chlorosubstituted) and three dioxin-like PCBs (PCB 77, PCB 126 and PCB169) were analyzed in bivalve mollusk collected in several Galician Rías between 2006 and 2014. Levels of Total PCDD/Fs ranged from 0.03 to 0.62 pg WHO-TEQ g^-1 wet weight. Total dl-PCBs values were higher than Total PCDD/Fs and ranged from 0.01 to 2.11 pg WHO-TEQ g^-1 wet weight. These concentrations were below those considered safe for human consumption. The PCDD/Fs profile was dominated by 2,3,4,7,8-PeCDF and 2,3,7,8-TCDF with a percentage of 24.95 and 23.87 of the Total PCDD/Fs, respectively. In relation to Total dl-PCBs, CB126 was the priority congener with the highest TEF value (0.1). Principal component analysis (PCAs) indicated a clear separation between the northern (Rías de Ferrol and Coruña) and southern Rías (Ría de Pontevedra and Vigo). The northern Rías were the highest contaminated one. Temporal trends showed important reduction rates suggesting that the regulations on dioxin like contaminants have been effective for quality waters in Galician Rías.

Reassessment and update of emission factors for unintentional dioxin-like polychlorinated biphenyls

One of the major goals of the Stockholm Convention on Persistent Organic Pollutants is to continuously reduce the releases of unintentional persistent organic pollutants (POPs) such as polychlorinated dibenzo-para-dioxins and dibenzofurans (PCDD/PCDF) or polychlorinated biphenyls (PCB) from anthropogenic sources. Until now, most efforts have focused on the releases of PCDD/PCDF and to a lesser extent on unintentionally generated PCB, and therefore, release inventories reported as toxic equivalents (TEQ) do not include the twelve dioxin-like PCB (dl-PCB). In order to facilitate the development of national release inventories for the total TEQ - consisting of PCDD, PCDF and PCB - this study collected and summarized published emission factors (EFs) of unintentional dl-PCB or calculated them from measured data for the sources listed in the UNEP Toolkit. In total, 286 EFs for dl-PCB were found (or could be calculated) whereby 233 described release to air, 23 EFs addressed to residue, 25 EFs to product; and only 5 EFs addressed releases to land. Taking into account performance criteria such as the facility type and scale or abatement technologies, the EFs were grouped and assigned to the source categories and/or classes used in the UNEP Toolkit. With these newly added data and EFs of dl-PCB, the already existing EFs in the Toolkit can be improved and amended. In addition, a statistically significant correlation between the EF_Air of dl-PCB proposed in this study and EF_Air of PCDD/PCDF recommended in the Toolkit was observed.

Analysis of polychlorodibenzo-p-dioxins and polychlorodibenzofurans in stationary source emissions in GC-MS/MS using hydrogen as the carrier gas

The European and American methods for the determination of polychlorodibenzo-p-dioxins and polychlorodibenzofurans in stationary source emissions require a high-resolution mass spectrometer detector. At the same time, all of the 17 toxic 2,3,7,8-chlorine-substituted isomers have to be separated by an appropriate chromatographic method. The resulting analysis has long runtimes and sometimes a double-column run is needed, which results in a huge waste of time, money and manual labor. To obtain a fast and cost-effective but still reliable analytical system, a single-column gas chromatography with hydrogen as carrier gas and tandem mass spectrometry detection is proposed. The use of hydrogen as the carrier gas is a good choice to shorten runtimes and improve the chromatographic resolution, while tandem mass spectrometry is a well-known alternative for this analysis. All the chromatographic and mass spectrometric parameters fill the requirements of the reference methods with a 35% reduction of runtimes. The accuracy is tested with three fly ash samples of a proficiency interlaboratory test. A good correlation between the results is obtained (R²  = 0.992, slope = 0.9675), and no coelutions are noted. The system robustness is tested during 5 years of constant use and the maximal relative standard deviation of the relative response factor is 18.8%.

Changes in serum dioxin and PCB levels in residents around a municipal waste incinerator in Bilbao, Spain

There is a great concern in the Basque Country regarding emissions from waste incineration, in particular that of organochlorines (OCs), including dioxins, furans and polychlorinated biphenyls (PCBs), and their potential effect on human health. In 2005, a municipal solid waste plant (MSWP) started to operate in Bilbao, representing an opportunity to assess the exposure to the aforementioned pollutants among people living at various distances from the plant. In 2006 and 2008, we carried out two cross-sectional studies to quantify and assess changes in levels of these pollutants. The objective of this study was to describe the levels of OCs in the blood serum in 2013 of 127 adults of this prospective cohort, in four centres of population, near to and further away from the MSWP, and to study trends over time since it started to operate. This study shows the levels of OCs have decreased significantly, from 37.2% to 80.1%. Further, levels of OCs in areas near to the MSWP were not found to be higher than those in areas further afield.

Spatiotemporal patterns and potential sources of polychlorinated biphenyl (PCB) contamination in Scots pine (Pinus sylvestris) needles from Europe

Using pine needles as a bio-sampler of atmospheric contamination is a relatively cheap and easy method, particularly for remote sites. Therefore, pine needles have been used to monitor a range of semi-volatile contaminants in the air. In the present study, pine needles were used to monitor polychlorinated biphenyls (PCBs) in the air at sites with different land use types in Sweden (SW), Czech Republic (CZ), and Slovakia (SK). Spatiotemporal patterns in levels and congener profiles were investigated. Multivariate analysis was used to aid source identification. A comparison was also made between the profile of indicator PCBs (ind-PCBs-PCBs 28, 52, 101, 138, 153, and 180) in pine needles and those in active and passive air samplers. Concentrations in pine needles were 220-5100 ng kg(-1) (∑18PCBs - ind-PCBs and dioxin-like PCBs (dl-PCBs)) and 0.045-1.7 ng toxic equivalent (TEQ) kg(-1) (dry weight (dw)). Thermal sources (e.g., waste incineration) were identified as important sources of PCBs in pine needles. Comparison of profiles in pine needles to active and passive air samplers showed a lesser contribution of lower molecular weight PCBs 28 and 52, as well as a greater contribution of higher molecular weight PCBs (e.g., 180) in pine needles. The dissimilarities in congener profiles were attributed to faster degradation of lower chlorinated congeners from the leaf surface or metabolism by the plant.

Predictability of physicochemical properties of polychlorinated dibenzo-p-dioxins (PCDDs) based on single-molecular descriptor models

Polychlorinated dibenzo-p-dioxins (PCDDs) are of global concern due to their persistence, bioaccumulation and toxicity. Although the fate of PCDDs in the environment is determined by their physical-chemical properties, such as aqueous solubility, vapor pressure, octanol/water-, air/water-, and octanol/water-partition coefficients, experimental property data on the entire set of 75 PCDD congeners are limited. The quantitative structure-property relationship (QSPR) approach is applied to predict the properties of all PCDD congeners. Experimental property data available from the literature are correlated against 16 molecular descriptors of five types. Reported and newly developed QSPR models for PCDDs are presented and reviewed. The values calculated by the best QSPRs are further adjusted to satisfy fundamental thermodynamic relationships. Although the single-descriptor models with chlorine number, molar volume, solvent accessible surface area and polarizability are based on good statistical results, these models cannot distinguish among PCDDs having the same chlorine number. The QSPR model based on the hyper-Wiener index of quantum-chemical descriptor gives useful statistical results and is able to distinguish among congeners with the same chlorine number, as well as satisfying thermodynamic relationships. The resulting consistent properties of the 75 PCDD congeners can be used for environmental modeling.

Pollutant emissions during the pyrolysis and combustion of flexible polyurethane foam

Thermal decomposition of flexible polyurethane foam (FPUF) was studied under nitrogen and air atmospheres at 550°C and 850°C using a laboratory scale reactor to analyse the evolved products. Ammonia, hydrogen cyanide and nitrile compounds were obtained in high yields in pyrolysis at the lower temperature, whereas at 850°C polycyclic aromatic hydrocarbons (PAHs) and other semivolatile compounds, especially compounds containing nitrogen (benzonitrile, aniline, quinolone and indene) were the most abundant products. Different behaviour was observed in the evolution of polychlorodibenzo-p-dioxins and furans (PCDD/Fs) at 550°C and 850°C. At 550°C, the less chlorinated congeners, mainly PCDF, were more abundant. Contrarily, at 850°C the most chlorinated PCDD were dominant. In addition, the total yields of PCDD/Fs in the pyrolysis and combustion runs at 850°C were low and quite similar.

Formation of Polychlorinated Biphenyls on Secondary Copper Production Fly Ash: Mechanistic Aspects and Correlation to Other Persistent Organic Pollutants

Emission of unintentionally formed polychlorinated biphenyls (PCBs) from industrial thermal processes is a global issue. Because the production and use of technical PCB mixtures has been banned, industrial thermal processes have become increasingly important sources of PCBs. Among these processes, secondary copper smelting is an important PCB source in China. In the present study, the potential for fly ash-mediated formation of PCBs in the secondary copper industry, and the mechanisms involved, were studied in laboratory thermochemical experiments. The total PCB concentrations were 37-70 times higher than the initial concentrations. Thermochemical reactions on the fly ash amplified the potential toxic equivalents of PCBs. The formation of PCBs over time and the effect of temperature were investigated. Based on analyses of PCB homologue profiles with different reaction conditions, a chlorination mechanism was proposed for forming PCBs in addition to a de novo synthesis mechanism. The chlorination pathway was supported by close correlations between each pair of adjacent homologue groups. Formation of PCBs and multiple persistent organic pollutants, including polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and polychlorinated naphthalenes, occurred during the tests, indicating that these compounds may share similar formation mechanisms.

Polychlorinated biphenyls in sediments and fish species from the Murchison Bay of Lake Victoria, Uganda

Polychlorinated biphenyls (PCBs) were determined in sediments and two fish species collected from the Murchison Bay in Lake Victoria, using high resolution gas chromatography coupled to a high resolution mass spectrometer. Total PCB concentrations (Σ18PCBs) varied widely with mean values ranging from 777 to 4325pg g(-1) dry weight (dw) for sediments and 80 to 779pg g(-1) wet weight (ww) for fish. The PCB levels in the sediments were significantly higher at the station closest to Nakivubo channel, presumably due to effluents discharged by the channel, which may contain domestically produced commercial PCB mixtures. For fish, the concentrations in Nile perch (Lates niloticus) were significantly greater than those in Nile tilapia (Oreochromis niloticus) at all study stations, possibly due to dietary differences among species. World Health Organization-toxic equivalents (WHO2005-TEQs) for the dioxin-like PCBs were 0.04-0.64pg g(-1) dw and 0.01-0.39pg g(-1) ww for sediments and fish, respectively. The non-ortho PCBs exhibited the highest contribution to the Σ12TEQs (>75%) compared to the mono-ortho PCBs in both fish species. The TEQs in the present study were lower than many reported worldwide in literature for fish and were within the permissible level recommended by the European Commission, implying that the fish did not pose health hazards related to PCBs to the consumers.

Removal of PCDD/Fs and PCBs from flue gas using a pilot gas cleaning system

A 100 Nm3/hr capacity pilot scale dual bag filter (DBF) system was tested on the flue gas from an actual hazardous waste incinerator (HWI), the removal efficiency of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) and polychlorinated biphenyls (PCBs) was also studied. The first filter collected most of the fly ash and associated chlorinated organic; then activated carbon (AC) was injected and used to collect phase chlorinated organic from the gas. Concentrations of PCDD/Fs and PCBs after the DBF system were 0.07 and 0.01 ng TEQ/Nm3, respectively, which were both far below the national emission standard. Comparing with the original single bag filter system, the PCDD/Fs concentration dropped a lot from 0.36 to 0.07 ng TEQ/Nm3. Increasing AC feeding rate enhanced their collection efficiency, yet reduced the AC utilization efficiency, and it still needs further study to select an appropriate feeding rate in the system. These results will be useful for industrial application and assist in controlling emissions of PCDD/Fs and other persistent organic pollutions from stationary sources in China.

Emission characterization of unintentionally produced persistent organic pollutants from iron ore sintering process in China

Emission of unintentionally produced persistent organic pollutants (Unintentional POPs), including polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychorinated biphenyls (PCBs), hexachlorobenzene (HxCBz) and pentachlorobenzene (PeCBz), were investigated in four typical iron ore sintering plants in China. The emission factors and annual mass releases of the Unintentional POPs were calculated. The results indicated that PCDFs contributed more than 60% to the overall toxic equivalent quantity (TEQ) values, while the contribution of the dl-PCBs is relatively low, and only in the range of 8-9%. The dominant congeners of PCDD/Fs and dl-PCBs contributing most to the total TEQ were 1,2,3,7,8-PeCDD, 2,3,4,7,8-PeCDF and PCB-126. With regard to the TEQ contributions, the most abundant homologues were PeCDFs and HxCDD/Fs, followed by PeCDDs and non-ortho dl-PCB, whereas HpCDD/Fs, OCDD/Fs and mono-ortho dl-PCBs almost made no contributions. Due to the massive use of recycled waste in the feeding materials, the average emission factor of PCDD/Fs and dl-PCBs of the four plants was 3.95 μg WHO-TEQ ton(-1). Based on the results, the annual release of PCDD/Fs and dl-PCBs in 2007-2009 were estimated to be 2070 g, 2212 g, and 2307 gWHO-TEQ, respectively.

Concentration of organic micropollutants in the atmosphere of Trieste, Italy

PURPOSE

PCDD/Fs, PCBs, and PAHs, ubiquitous environmental pollutants which are part of the POPs, are mainly produced by anthropogenic activities as well as by natural processes. Occurrences of these pollutants in different sites in Trieste are presented. PCDD/Fs distribution and their possible emission sources are discussed.

METHODS

Air samples were collected in different sites near the industrial area, in the city center, and in a background area, using a high-volume sampler equipped with a quartz fiber filter and a PUF. Each sampling lasted a week.

RESULTS

The concentrations of the organochlorinated pollutants are consistent with literature data (ΣPCDD/Fs and Σdl-PCBs were 5-38 fg TEQ/Nm(3) and 4-31 fg TEQ/Nm(3), respectively), and an apparent seasonal trend was found with slightly higher concentrations in the winter and lower levels in both summer campaigns. Moreover, the isomer profile of each sampling campaign was compared to the fingerprint of a sintering plant, a cement plant, and an incinerator, the main industrial activities in Trieste.

CONCLUSIONS

The organic micropollutants were detected in levels consistent with literature data. The results show that the pollutants are uniformally distributed in the atmosphere of Trieste. PCDD/F fingerprints in each site remained almost identical during summer and winter, confirming the yearly prevalence of the emissions from the nearby sintering plant.

A preliminary investigation of unintentional POP emissions from thermal wire reclamation at industrial scrap metal recycling parks in China

Thermal wire reclamation is considered to be a potential source of unintentional persistent organic pollutants (unintentional POPs). In this study, unintentional POP concentrations, including PCDD/Fs, dioxin like PCBs (dl-PCBs), polychlorinated naphthalenes (PCNs), hexachlorobenzene (HxCBz) and pentachlorobenzene (PeCBz), were quantified in flue gas and residual ash emissions from thermal wire reclamation at scrap metal dismantling parks in Zhejiang Province, China. The total average TEQ emissions of the investigated unintentional POPs from flue gas and residual ash in two typical scrap metal recycling plants ranged from 13.1 to 48.3ngTEQNm(-3) and 0.08 to 2.8ngTEQg(-1), respectively. The dominant PCDD/F congeners were OCDD, 1,2,3,4,6,7,8-HpCDD, OCDF and 1,2,3,4,6,7,8-HpCDF, while PCB-126 and PCB-169 were the main contributors to the toxicity of the dl-PCBs. There were clear differences in the distribution dl-PCBs congeners contributing to the TEQ concentrations in the flue gas samples from the two plants. The PCN TEQs were dominated by PCN-66/67 and PCN-73. Although thermal wire reclamation in incinerators has been proposed as an alternative to open burning, there are still considerable environmental risks associated with regulated incinerators, and unintentional POP emissions from thermal wire reclamation sites need to be controlled by local government agencies.

Experimental evaluation of PCDD/Fs and PCBs release and mass balance of a WTE plant

The behaviour of waste incineration plants with respect to organic toxic trace contaminants such as PCDDs, PCDFs and, to a minor extent, PCBs, is still a matter of concern for the public opinion and the decision makers. It is therefore very important, first, to evaluate the release of these organic toxic trace contaminants in the environment during waste incineration, not only through the stack gas emission but also with the solid and liquid residues, and then to compare the total release with the input through the treated waste in order to assess the plant behaviour as a "sink" rather than a "source" of organic toxic trace contaminants. The experimental investigation carried out on an Italian full scale incineration plant has shown a total 17 PCDD/Fs and 12 dioxin-like PCBs release of 5.5-27 μg WHO-TEQ per tonne of treated waste and an input flux of 1.6-44 μg WHO-TEQ per tonne of waste, with the difference between the input and the output fluxes rather small and the plant behaviour toward organic trace toxic contaminants in average neutral. Results are compared with similar evaluations conducted in the last decade on a number of waste-to-energy (WTE) plants operating in Italy.

PCDD/Fs atmospheric deposition fluxes and soil contamination close to a municipal solid waste incinerator

Bulk depositions and surface soil were collected in a suburban area, near the Adriatic Sea, in order to assess the contribution of a municipal solid waste incinerator to the area's total contamination with polychlorinated dibenzodioxins and polychlorinated dibenzofurans (PCDDs and PCDFs). Samples were collected at two sites, situated in the area most affected by plant emissions (according to the results of the Calpuff air dispersion model), and at an external site, considered as a reference. Results show that the studied area is subject to low contamination, as far as these compounds are concerned. Deposition fluxes range from 14.3 pg m(-2)d(-1) to 89.9 pg m(-2)d(-1) (0.75 pg-TEQ m(-2)d(-1) to 3.73 pg-TEQ m(-2)d(-1)) and no significant flow differences are observed among the three monitored sites. Total soil concentration amounts to 93.8 ng kg(-1) d.w. and 1.35 ng-TEQ kg(-1)d.w, on average, and confirms a strong homogeneity in the studied area. Furthermore, from 2006 to 2009, no PCDD/Fs enrichment in the soil was noticed. Comparing the relative congener distributions in environmental samples with those found in stack emissions from the incineration plant, significant differences are observed in the PCDD:PCDF ratio and in the contribution of the most chlorinated congeners. From this study we can conclude that the incineration plant is not the main source of PCDD/Fs in the studied area, which is apparently characterized by a homogeneous and widespread contamination situation, typical of an urban area.

Comparative distribution, sourcing, and chemical behavior of PCDD/Fs and PCBs in an estuary environment

PCDD/F and PCB field data (1041 samples) in five media (dissolved, suspended sediment, bed sediment, catfish, and blue crab) were studied to explore dual contaminant patterns in the Houston Ship Channel, Texas, USA. PCDD/Fs showed greater concentration than PCBs in suspended sediments while PCBs were higher in apparent dissolved (truly dissolved+DOC-associated), fish, and crab. PCDD/Fs at nearly all locations contributed more strongly to dioxin-like toxicity. The fraction of PCB TEQ was, however, enriched in biotic over abiotic media due in large part to the presence of PCB 126, which was mostly undetected in water and sediment and yet exhibited a BAF three times greater than 2,3,7,8-TCDD. Dissolved-suspended sediment and suspended-bed sediment relationships showed that (1) observed apparent dissolved concentration differences (as fraction of total water were mean 10% PCDD/Fs and 63% PCBs) can reasonably be explained by a four-phase partition model (truly dissolved, DOC-associated, suspended OC, and suspended BC) for PCBs but not for PCDD/Fs and (2) the contaminants behaved similarly in bed to suspended sediment concentration ratios (C(bed)/C(susp)) upstream of a major confluence but not downstream. PCA-cluster analysis pointed to the possibility that suspended sediment PCB contamination originates from resuspended bed sediment while PCDD/Fs in suspended sediment originates more probably from other sediment sources such as upstream wash load or air deposition. Finally, examinations of a congener marker ratio (PCB 209/206) seemed to indicate that a source of pure PCB 209 may exist in bed sediment near Patrick Bayou though the source was not completely localized.

Suppression of PCDD/Fs formation because of the presence of DEHP during the model slow combustion of 2,4,6-trichlorophenol

The thermal reactions of 2,4,6-T(3)CP in the presence and absence of DEHP in a dry air stream was investigated using a silica flow reactor at a residence time of 10s and a temperature range from 450 degrees C to 850 degrees C. Two isomers of T(4)CDDs (1,3,6,8- and 1,3,7,9-T(4)CDDs) were the most abundant products during the combustion of 2,4,6-T(3)CP alone and were observed at temperatures ranging from 550 degrees C to 800 degrees C. In the presence of DEHP, we observed a remarkable decrease in the yields of T(4)CDDs during the combustion of 2,4,6-T(3)CP. The suppression ratio of the T(4)CDDs formation was more than 90% in the case of the co-combustion with 10% DEHP in molar ratio. Other PCDD/Fs except for 2,7-/2,8-DCDD and 2,8-DCDF also decreased upon the combustion of 2,4,6-T(3)CP in the presence of DEHP. During the co-combustion of 2,4,6-T(3)CP and DEHP, the residual ratio of 2,4,6-T(3)CP increased slightly and formations of lower chlorinated phenols were observed. The suppression of the T(4)CDDs was strongly dependent on the DEHP ratio in the starting material. The prospective pathways of the suppressions of the T(4)CDDs formations during the combustion of 2,4,6-T(3)CP in the presence of DEHP were proposed.

Test burn with PCB-oil in a local cement kiln in Sri Lanka

The production and use of polychlorinated biphenyls (PCBs) have ceased and most developed countries have disposed off their stocks long time ago. PCBs can however still be found in the environment and one important source is accumulated stocks in developing countries. Sound treatment of PCB is costly and most developing countries do not have dedicated hazardous waste incinerators or non-combustion technologies available for domestic disposal and can usually not afford export. High temperature cement kilns have been used to treat organic hazardous wastes in developed countries for decades and shown to constitute a sound option if well managed and controlled. In contrast to dedicated hazardous waste incinerators and other treatment techniques, cement kilns are already in place in virtually every country and may constitute a treatment option. The objective of this study was therefore to carry out the first test burn with PCB-oil in a developing country cement kiln and to assess its feasibility and destruction performance. The 3 d test burn demonstrated that the Sri Lankan cement kiln was able to destroy PCB in an irreversible and environmental sound manner without causing any new formation of PCDD/PCDF or HCB. The destruction and removal efficiency (DRE) was better than 99.9999% at the highest PCB feeding rate.

Characterization of fly ash from a hazardous waste incinerator in Medellin, Colombia

Bag filter (BF) fly ash from a hazardous waste incinerator located in Medellín, Colombia was characterized. Particle size distribution, chemical composition, metal loading, surface area, morphology, and chemical environment were assessed before and after fly ash extraction with toluene. Fly ash consists of low surface area platelets of SiO(2) smaller than 0.5 microm agglomerated in spheres between 20 and 100 microm. High concentration of sodium chloride, carbon, and heavy metals such as Cu, Fe, Pb, Hg, Cd, Co and Mn are deposited over the fly ash surface. The carbon is oxidized and forms different structures such as amorphous carbon black, nano balls and more crystalline fullerenes like nano onions. The high concentration of dioxins, furans and dioxin-like PCBs (superior to 185 ng WHO-TEQ/g) is favored by oxidized carbon, chlorine and metals such as Cu and Fe on the shell of the particles. Before and after toluene extraction, fly ash samples presented similar morphology. However, after extraction their particle size increased while their surface area decreased by 35% and the carbon and metal contents decreased by 35% and 50%, respectively.

Emissions of PCDD/Fs from municipal solid waste incinerators in China

Gas emission of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) from 19 commercial municipal solid waste (MSW) incinerators in China are investigated. The emission concentrations of PCDD/Fs were 0.042-2.461 ng TEQ Nm(-3) with an average value of 0.423 ng TEQ Nm(-3). The emissions of PCDD/Fs from 16 MSW incinerators were below the MEP regulation level (1.0 ng I-TEQ Nm(-3)), while only six systems have the dioxin emission levels below the limit established by the European Union Directive of 0.1 ng I-TEQ Nm(-3). The emission factors of PCDD/Fs from 19 MSW incinerators were calculated to be 0.169-10.72 microg TEQ ton(-1) MSW with an average value of 1.728 microg I-TEQ ton(-1) MSW. The total amount of PCDD/Fs emitted from MSW incinerators to the atmosphere in China was estimated to 19.64 g TEQ year(-1) in 2006.

A preliminary investigation on emission of polychlorinated dibenzo-p-dioxins/dibenzofurans and dioxin-like polychlorinated biphenyls from coke plants in China

Thermal related processes are widely recognized as the main sources of formation and emission of polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) and polychlorinated biphenyls (PCBs). It is well known that, carbonization of coal in coke production involves many thermal reactions at high-temperature. However, there are still no strong evidences to identify coking processes as source of PCDD/Fs and PCBs. In this study, coke production was qualified and quantified for emission of PCDD/Fs and dioxin-like PCBs (dl-PCBs) in some typical coke plants in China. In the preliminary investigation, stack gases from three typical coke plants were collected, and dl-PCBs and 2378-substituted PCDD/Fs were analyzed by isotope dilution HRGC/HRMS technique. The total toxic equivalents of dl-PCBs and PCDD/Fs were in the range of 1.6-1785.4pg WHO-TEQNm(-3). For dl-PCBs, the most abundant congener was CB-118, and the most dominant contributor to total WHO-TEQ of dl-PCBs was CB-126. With regard to PCDD/Fs, four congeners comprised of OCDD, 1234678-HpCDD, 1234678-HpCDF and OCDF were the predominant species in stack gases. Further investigation on the emission of dioxins from coking industry is still in process.

Ambient air monitoring of Beijing MSW logistics facilities in 2006

In China, "green" integrated waste management methods are being implemented in response to environmental concerns. We measured the air quality at several municipal solid waste (MSW) sites to provide information for the incorporation of logistics facilities within the current integrated waste management system. We monitored ambient air quality at eight MSW collecting stations, five transfer stations, one composting plant, and five disposal sites in Beijing during April 2006. Composite air samples were collected and analyzed for levels of odor, ammonia (NH3), hydrogen sulfide (H2S), total suspended particles (TSPs), carbon monoxide (CO), sulfur dioxide (SO2), and nitrogen dioxide (NO2). The results of our atmospheric monitoring demonstrated that although CO and SO2 were within acceptable emission levels according to ambient standards, levels of H2S, TSP, and NO2 in the ambient air at most MSW logistics facilities far exceeded ambient limits established for China. The primary pollutants in the ambient air at Beijing MSW logistics facilities were H2S, TSPs, NO2, and odor. To improve current environmental conditions at MSW logistics facilities, the Chinese government encourages the separation of biogenic waste from MSW at the source.