Transformation and bioavailability of metal oxide nanoparticles in aquatic and terrestrial environments. A review

Multiomics analysis reveals a substantial decrease in nanoplastics uptake and associated impacts by nano zinc oxide in fragrant rice (Oryza sativa L.)

Nanoplastics (NPs) have emerged as global environmental pollutants with concerning implications for sustainable agriculture. Understanding the underlying mechanisms of NPs toxicity and devising strategies to mitigate their impact is crucial for crop growth and development. Here, we investigated the nanoparticles of zinc oxide (nZnO) to mitigate the adverse effects of 80 nm NPs on fragrant rice. Our results showed that optimized nZnO (25 mg L-1) concentration rescued root length and structural deficits by improving oxidative stress response, antioxidant defense mechanism and balanced nutrient levels, compared to seedlings subjected only to NPs stress (50 mg L-1). Consequently, microscopy observations, Zeta potential and Fourier transform infrared (FTIR) results revealed that NPs were mainly accumulated on the initiation joints of secondary roots and between cortical cells that blocks the nutrients uptake, while the supplementation of nZnO led to the formation of aggregates with NPs, which effectively impedes the uptake of NPs by the roots of fragrant rice. Transcriptomic analysis identified a total of 3973, 3513 and 3380 differentially expressed genes (DEGs) in response to NPs, nZnO and NPs+nZnO, respectively, compared to the control. Moreover, DEGs were significantly enriched in multiple pathways including biosynthesis of secondary metabolite, phenylpropanoid biosynthesis, amino sugar and nucleotide sugar metabolism, carotenoid biosynthesis, plant-pathogen interactions, MAPK signaling pathway, starch and sucrose metabolism, and plant hormone signal transduction. These pathways could play a significant role in alleviating NPs toxicity and restoring fragrant rice roots. Furthermore, metabolomic analysis demonstrated that nZnO application restored 2-acetyl-1-pyrroline (2-AP) pathways genes expression, enzymatic activities, and the content of essential precursors related to 2-AP biosynthesis under NPs toxicity, which ultimately led to the restoration of 2-AP content in the leaves. In conclusion, this study shows that optimized nZnO application effectively alleviates NPs toxic effects and restores both root structure and aroma production in fragrant rice leaves. This research offers a sustainable and practical strategy to enhance crop production under NPs toxicity while emphasizing the pivotal role of essential micronutrient nanomaterials in agriculture.

A review of the influence of heat drying, alkaline treatment, and composting on biosolids characteristics and their impacts on nitrogen dynamics in biosolids-amended soils

Application of biosolids to agricultural land has gained increasing attention due to their rich nutrient content. There are a variety of treatment processes for converting sewage sludge to biosolids. Different treatment processes can change the physicochemical properties of the raw sewage sludge and affect the dynamics of nutrient release in biosolids-amended soils. This paper reviews heat drying, alkaline treatment, and composting as biosolids treatment processes and discusses the effects of these treatments on biosolid nitrogen (N) content and availability. Most N in the biosolids remain in organic forms, regardless of biosolids treatment type but considerable variation exists in the mean values of total N and mineralizable N across different types of biosolids. The highest mean total N content was recorded in heat-dried biosolids (HDB) (4.92%), followed by composted biosolids (CB) (2.25%) and alkaline-treated biosolids (ATB) (2.14%). The mean mineralizable N value was similar between HDB and ATB, with a broader range of mineralizable N in ATB. The lowest N availability was observed in CB. Although many models have been extensively studied for predicting potential N mineralization in soils amended with organic amendments, limited research has attempted to model soil N mineralization following biosolids application. With biosolids being a popular, economical, and eco-friendly alternative to chemical N-fertilizers, understanding biosolids treatment effects on biosolids properties is important for developing a sound biosolids management system. Moreover, modeling N mineralization in biosolids-amended soils is essential for the adoption of sustainable farming practices that maximize the agronomic value of all types of biosolids.

Nano-enabled agrochemicals: mitigating heavy metal toxicity and enhancing crop adaptability for sustainable crop production

The primary factors that restrict agricultural productivity and jeopardize human and food safety are heavy metals (HMs), including arsenic, cadmium, lead, and aluminum, which adversely impact crop yields and quality. Plants, in their adaptability, proactively engage in a multitude of intricate processes to counteract the impacts of HM toxicity. These processes orchestrate profound transformations at biomolecular levels, showing the plant's ability to adapt and thrive in adversity. In the past few decades, HM stress tolerance in crops has been successfully addressed through a combination of traditional breeding techniques, cutting-edge genetic engineering methods, and the strategic implementation of marker-dependent breeding approaches. Given the remarkable progress achieved in this domain, it has become imperative to adopt integrated methods that mitigate potential risks and impacts arising from environmental contamination on yields, which is crucial as we endeavor to forge ahead with the establishment of enduring agricultural systems. In this manner, nanotechnology has emerged as a viable field in agricultural sciences. The potential applications are extensive, encompassing the regulation of environmental stressors like toxic metals, improving the efficiency of nutrient consumption and alleviating climate change effects. Integrating nanotechnology and nanomaterials in agrochemicals has successfully mitigated the drawbacks associated with traditional agrochemicals, including challenges like organic solvent pollution, susceptibility to photolysis, and restricted bioavailability. Numerous studies clearly show the immense potential of nanomaterials and nanofertilizers in tackling the acute crisis of HM toxicity in crop production. This review seeks to delve into using NPs as agrochemicals to effectively mitigate HM toxicity and enhance crop resilience, thereby fostering an environmentally friendly and economically viable approach toward sustainable agricultural advancement in the foreseeable future.

Neglected negative effect of carbon quantum dots (CQDs) entering the ocean on marine organisms living in different water layers

Carbon quantum dots (CQDs) are well dispersed in water, but their potential risks in the marine environment have not been described. This study characterized CQDs and investigated their biological effects (including growth, photosynthesis and behavioural changes) in three marine organisms living in different water layers (the surface phytoplankton Phaeodactylum tricornutum and zooplankton Artemia salina and the benthic coral Zoanthus sp. at the bottom). The results showed that over 78 % of CQDs were suspended in seawater after 96 h. The biomass and photosynthesis of P. tricornutum were significantly affected, with a maximum reduction of 89.49 % in algal cells. CQDs accumulated in the intestinal tract of A. salina, reducing grazing and filtration rates by up to 71.88 % and 89.46 %, respectively. In contrast, CQD exposure had irreversible effects on the tentacle expansion behaviour of Zoanthus sp. This study helps clarify the environmental effects and ecological risks associated with the release of CQDs into the ocean.

Characterization of Fe-Containing and Pb-Containing Nanoparticles Resulting from Corrosion of Plumbing Materials in Tap Water Using a Hyphenated ATM-DMA-spICP-MS System

Single-particle inductively coupled plasma mass spectrometry (spICP-MS) has been used to characterize metallic nanoparticles (NPs) assuming that all NPs are spherical and composed of pure element. However, environmental NPs generally do not meet these criteria, suggesting that spICP-MS may underestimate their true sizes. This study employed a system hyphenating the atomizer (ATM), differential mobility analyzer (DMA), and spICP-MS to characterize metallic NPs in tap water. Its performance was validated by using reference Au nanoparticles (AuNPs) and Ag-shelled AuNPs. The hyphenated system can determine the actual size and metal composition of both NPs with additional heating after ATM, while stand-alone spICP-MS misidentified the Ag-shelled AuNPs as smaller individual AgNPs and AuNPs. Dissolved metal ions could introduce artifact NPs after heating but could be eliminated by centrifugation. The hyphenated system was applied to characterize Fe-containing and Pb-containing NPs resulting from the corrosion of plumbing materials in tap water. The mode sizes of Fe-containing and Pb-containing NPs were determined to be 110 and 100 nm and the particle number concentrations were determined to be 4.99 × 107 and 1.40 × 106 #/mL, respectively. Cautions should be paid to potential changes in particle size induced by heating for metallic NPs with a low melting point or a high organic content.

Predicting environmental concentrations of nanomaterials for exposure assessment - a review

There have been major advances in the science to predict the likely environmental concentrations of nanomaterials, which is a key component of exposure and subsequent risk assessment. Considerable progress has been since the first Material Flow Analyses (MFAs) in 2008, which were based on very limited information, to more refined current tools that take into account engineered nanoparticle (ENP) size distribution, form, dynamic release, and better-informed release factors. These MFAs provide input for all environmental fate models (EFMs), that generate estimates of particle flows and concentrations in various environmental compartments. While MFA models provide valuable information on the magnitude of ENP release, they do not account for fate processes, such as homo- and heteroaggregation, transformations, dissolution, or corona formation. EFMs account for these processes in differing degrees. EFMs can be divided into multimedia compartment models (e.g., atmosphere, waterbodies and their sediments, soils in various landuses), of which there are currently a handful with varying degrees of complexity and process representation, and spatially-resolved watershed models which focus on the water and sediment compartments. Multimedia models have particular applications for considering predicted environmental concentrations (PECs) in particular regions, or for developing generic "fate factors" (i.e., overall persistence in a given compartment) for life-cycle assessment. Watershed models can track transport and eventual fate of emissions into a flowing river, from multiple sources along the waterway course, providing spatially and temporally resolved PECs. Both types of EFMs can be run with either continuous sources of emissions and environmental conditions, or with dynamic emissions (e.g., temporally varying for example as a new nanomaterial is introduced to the market, or with seasonal applications), to better understand the situations that may lead to peak PECs that are more likely to result in exceedance of a toxicological threshold. In addition, bioaccumulation models have been developed to predict the internal concentrations that may accumulate in exposed organisms, based on the PECs from EFMs. The main challenge for MFA and EFMs is a full validation against observed data. To date there have been no field studies that can provide the kind of dataset(s) needed for a true validation of the PECs. While EFMs have been evaluated against a few observations in a small number of locations, with results that indicate they are in the right order of magnitude, there is a great need for field data. Another major challenge is the input data for the MFAs, which depend on market data to estimate the production of ENPs. The current information has major gaps and large uncertainties. There is also a lack of robust analytical techniques for quantifying ENP properties in complex matrices; machine learning may be able to fill this gap. Nevertheless, there has been major progress in the tools for generating PECs. With the emergence of nano- and microplastics as a leading environmental concern, some EFMs have been adapted to these materials. However, caution is needed, since most nano- and microplastics are not engineered, therefore their characteristics are difficult to generalize, and there are new fate and transport processes to consider.

Insight interactions of engineered nanoparticles with aquatic higher plants for phytoaccumulation, phytotoxicity, and phytoremediation applications: A review

With the growing age of human civilization, industrialization has paced up equally which is followed by the innovation of newer concepts of science and technology. One such example is the invention of engineered nanoparticles and their flagrant use in widespread applications. While ENPs serve their intended purposes, they also disrupt the ecological balance by contaminating pristine aquatic ecosystems. This review encompasses a comprehensive discussion about the potent toxicity of ENPs on aquatic ecosystems, with a particular focus on their impact on aquatic higher plants. The discussion extends to elucidating the fate of ENPs upon release into aquatic environments, covering aspects ranging from morphological and physiological effects to molecular-level phytotoxicity. Furthermore, this level of toxicity has been correlated with the determination of competent plants for the phytoremediation process towards the mitigation of this ecological stress. However, this review further illustrates the path of future research which is yet to be explored. Determination of the genotoxicity level of aquatic higher plants could explain the entire process comprehensively. Moreover, to make it suitable to be used in natural ecosystems phytoremediation potential of co-existing plant species along with the presence of different ENPs need to be evaluated. This literature will undoubtedly offer readers a comprehensive understanding of the stress induced by the irresponsible release of engineered nanoparticles (ENP) into aquatic environments, along with insights into the resilience characteristics of these pristine ecosystems.

Getting fat and stressed: Effects of dietary intake of titanium dioxide nanoparticles in the liver of turbot Scophthalmus maximus

The extensive use of nanomaterials, including titanium dioxide nanoparticles (TiO2 NPs), raises concerns about their persistence in ecosystems. Protecting aquatic ecosystems and ensuring healthy and safe aquaculture products requires the assessment of the potential impacts of NPs on organisms. Here, we study the effects of a sublethal concentration of citrate-coated TiO2 NPs of two different primary sizes over time in flatfish turbot, Scophthalmus maximus (Linnaeus, 1758). Bioaccumulation, histology and gene expression were assessed in the liver to address morphophysiological responses to citrate-coated TiO2 NPs. Our analyses demonstrated a variable abundance of lipid droplets (LDs) in hepatocytes dependent on TiO2 NPs size, an increase in turbot exposed to smaller TiO2 NPs and a depletion with larger TiO2 NPs. The expression patterns of genes related to oxidative and immune responses and lipid metabolism (nrf2, nfκb1, and cpt1a) were dependent on the presence of TiO2 NPs and time of exposure supporting the variance in hepatic LDs distribution over time with the different NPs. The citrate coating is proposed as the likely catalyst for such effects. Thus, our findings highlight the need to scrutinize the risks associated with exposure to NPs with distinct properties, such as primary size, coatings, and crystalline forms, in aquatic organisms.

Biotic and Abiotic Interactions in Freshwater Mesocosms Determine Fate and Toxicity of CuO Nanoparticles

Transformation, dissolution, and sorption of copper oxide nanoparticles (CuO-NP) play an important role in freshwater ecosystems. We present the first mesocosm experiment on the fate of CuO-NP and the dynamics of the zooplankton community over a period of 12 months. Increasingly low (0.08-0.28 mg Cu L-1) and high (0.99-2.99 mg Cu L-1) concentrations of CuO-NP and CuSO4 (0.10-0.34 mg Cu L-1) were tested in a multiple dosing scenario. At the high applied concentration (CuO-NP_H) CuO-NP aggregated and sank onto the sediment layer, where we recovered 63% of Cu applied. For the low concentration (CuO-NP_L) only 41% of applied copper could be recovered in the sediment. In the water column, the percentage of initially applied Cu recovered was on average 3-fold higher for CuO-NP_L than for CuO-NP_H. Zooplankton abundance was substantially compromised in the treatments CuSO4 (p < 0.001) and CuO-NP_L (p < 0.001). Community analysis indicated that Cladocera were most affected (bk = -0.49), followed by Nematocera (bk = -0.32). The abundance of Cladocera over time and of Dixidae in summer was significantly reduced in the treatment CuO-NP_L (p < 0.001; p < 0.05) compared to the Control. Our results indicate a higher potential for negative impacts on the freshwater community when lower concentrations of CuO-NP (<0.1 mg Cu L-1) enter the ecosystem.

Meta-analysis of engineered nanoparticles dynamic aggregation in freshwater-like systems using machine learning techniques

Predictive algorithms for exposure characterization of engineered nanoparticles (ENPs) in the ecosystems are essential to improve the development of robust nano-safety frameworks. Here, machine learning (ML) techniques were utilised for data mining and prediction of the dynamic aggregation transformation process in aqueous environments using case studies of nZnO and nTiO₂. Supervised ML models using input variables of natural organic matter, ionic strength, size, and ENPs concentration showed poor prediction performance based on statistical metric values of root mean square error (RMSE), mean absolute error (MAE), coefficient of determination (R²), and Nash-Sutcliffe efficiency (NSE) for both types of ENP. On the contrary, algorithms developed using model input parameters of zeta potential, pH, and time had good generalisation and high prediction accuracy. Among the five developed ML algorithms, random forest regression, support vector regression, and artificial neural network generated good prediction accuracy for both data sets. Therefore, the use of ML can be valuable in the development of robust nano-safety frameworks to optimise societal benefits, and for proactive long-term ecological protection.

Global analysis of the perturbation effects of metal-based nanoparticles on soil nitrogen cycling

Although studies have investigated the effects of metal-based nanoparticles (MNPs) on soil biogeochemical processes, the results obtained thus far are highly variable. Moreover, we do not yet understand how the impact of MNPs is affected by experimental design and environmental conditions. Herein, we conducted a global analysis to synthesize the effects of MNPs on 17 variables associated with soil nitrogen (N) cycling from 62 studies. Our results showed that MNPs generally exerted inhibitory effects on N-cycling process rates, N-related enzyme activities, and microbial variables. The response of soil N cycling varied with MNP type, and exposure dose was the most decisive factor for the variations in the responses of N-cycling process rates and enzyme activities. Notably, Ag/Ag2 S and CuO had dose-dependent inhibitory effects on ammonia oxidation rates, while CuO and Zn/ZnO showed hormetic effects on nitrification and denitrification rates, respectively. Other experimental design factors (e.g., MNP size and exposure duration) also regulated the effect of MNPs on soil N cycling, and specific MNPs, such as Ag/Ag2 S, exerted stronger effects during long-term (>28 days) exposure. Environmental conditions, including soil pH, organic carbon, texture, and presence/absence of plants, significantly influenced MNP toxicity. For instance, the effects of Ag/Ag2 S on the ammonia oxidation rate and the activity of leucine aminopeptidase were more potent in acid (pH <6), organic matter-limited (organic carbon content ≤10 g kg-1 ), and coarser soils. Overall, these results provide new insights into the general mechanisms by which MNPs alter soil N processes in different environments and underscore the urgent need to perform multivariate and long-term in situ trials in simulated natural environments.

Aging of Copper Nanoparticles in the Marine Environment Regulates Toxicity for a Coastal Phytoplankton Species

Environmental conditions in aquatic ecosystems transform toxic chemicals over time, influencing their bioavailability and toxicity. Using an environmentally relevant methodology, we tested how exposure to seawater for 1-15 weeks influenced the accumulation and toxicity of copper nanoparticles (nano-Cu) in a marine phytoplankton species. Nano-Cu rapidly agglomerated in seawater and then decreased in size due to Cu dissolution. Dissolution rates declined during weeks 1-4 and remained low until 15 weeks, when the large agglomerates that had formed began to rapidly dissolve again. Marine phytoplankton species were exposed for 5-day periods to nano-Cu aged from 1 to 15 weeks at concentrations from 0.01 to 20 ppm. Toxicity to phytoplankton, measured as change in population growth rate, decreased significantly with particle aging from 0 to 4 weeks but increased substantially in the 15-week treatment due apparently to elevated Cu dissolution of reagglomerated particles. Results indicate that the transformation, fate, and toxicity of nano-Cu in marine ecosystems are influenced by a highly dynamic physicochemical aging process.

Dynamic responses of carbon metabolism of sediment microbial communities to Ag nanoparticles: Effects of the single and repeated exposure scenarios

The widespread use of nanosilver will inevitably lead to their release into aquatic environment, threating the health of freshwater ecosystem. The toxic effects of silver nanoparticles (AgNPs) on sediment microbial diversity, community composition, and functional enzyme activity are well established, while little is known about how sediment microbes dynamically respond to the stress of different AgNPs exposure scenarios. Herein, microcosm experiments were performed to investigate the impacts of repeated (1 mg/L, applied every 6 days for 10 times) and single (10 mg/L) exposure scenarios of AgNPs on the specific functions of sediment microbes (5-60 days). The carbon metabolism of sediment microbial communities was measured using BIOLOG ECO microplates, and carbon metabolic rate and functional diversity indices were calculated. Compared to control group, the maximum carbon source utilization capacity of the microbial community increased by 6.6 and 15.4 % in the single and repeated exposure group, respectively. And the metabolic rates of sediment microorganisms were significant increased by 6.1 % in the repeated exposure group, which suggested that repetitive low-dosing of AgNPs induce a larger alteration of both capacity and rate of microbial carbon metabolism. Notably, different AgNPs exposure scenarios resulted in a shift in the carbon source preference of the microorganisms. After exposure for 60 days, compared with the controls, the ability to utilize polymers was significantly increased by 51.5 and 21.7 % in the single and repeated exposure groups, respectively, and decreased by 33.7 and 10.5 % in the utilization of miscellaneous, both exhibiting significant differences (P < 0.05), implying that AgNPs exposure scenarios affected the microbial-mediated carbon cycling processes in sediment. These results highlight that different exposure scenarios of AgNPs have different effects on the carbon metabolism capacity of microbial communities, thus affecting the carbon cycling processes in which microorganisms are involved.

Differences in toxicity and accumulation of metal from copper oxide nanomaterials compared to copper sulphate in zebrafish embryos: Delayed hatching, the chorion barrier and physiological effects

The mechanisms of toxicity of engineered nanomaterials (ENMs) to the early life stages of freshwater fish, and the relative hazard compared to dissolved metals, is only partially understood. In the present study, zebrafish embryos were exposed to lethal concentrations of copper sulphate (CuSO₄) or copper oxide (CuO) ENMs (primary size ∼15 nm), and then the sub-lethal effects investigated at the LC₁₀ concentrations over 96 h. The 96 h-LC₅₀ (mean ± 95% CI) for CuSO₄ was 303 ± 14 µg Cu L^-1 compared to 53 ± 9.9 mg L^-1 of the whole material for CuO ENMs; with the ENMs being orders of magnitude less toxic than the metal salt. The EC₅₀ for hatching success was 76 ± 11 µg Cu L^-1 and 0.34 ± 0.78 mg L^-1 for CuSO₄ and CuO ENMs respectively. Failure to hatch was associated with bubbles and foam-looking perivitelline fluid (CuSO₄), or particulate material smothering the chorion (CuO ENMs). In the sub-lethal exposures, about 42% of the total Cu as CuSO₄ was internalised, as measured by Cu accumulation in the de-chorionated embryos, but for the ENMs exposures, nearly all (94%) of the total Cu was associated with chorion; indicating the chorion as an effective barrier to protect the embryo from the ENMs in the short term. Both forms of Cu exposure caused sodium (Na⁺) and calcium (Ca²⁺), but not magnesium (Mg²⁺), depletion from the embryos; and CuSO₄ caused some inhibition of the sodium pump (Na⁺/K⁺-ATPase) activity. Both forms of Cu exposure caused some loss of total glutathione (tGSH) in the embryos, but without induction of superoxide dismutase (SOD) activity. In conclusion, CuSO₄ was much more toxic than CuO ENMs to early life stage zebrafish, but there are subtle differences in the exposure and toxic mechanisms for each substance.

Transcriptome reveals the exposure effects of CeO2 nanoparticles on pakchoi (Brassica chinensis L.) photosynthesis

In this study, soil-grown pakchoi after 2 weeks seedling cultivation were exposed to CeO₂ nanoparticles (CeO₂ NPs) at 0.7, 7, 70, and 350 mg kg^-1 for 30 days. Results showed that chlorophyll content and photosynthetic assimilation rate were decreased significantly under all treatments with the largest decrease of 34.16% (0.7 mg kg^-1 CeO₂ NPs), however, sub-stomatal CO₂ was increased dramatically under low dose of CeO₂ NPs (0.7 mg kg^-1). There were 4576, 3548, 2787, and 2514 genes up/down regulated significantly by 0.7, 7, 70, and 350 mg kg^-1 CeO₂ NPs, respectively, and 767 genes affected under all treatments. In addition, 0.7 mg kg^-1 CeO₂ NPs up-regulated 10 chlorophyll synthesis genes, 20 photosynthesis genes, and 10 carbon fixation enzyme genes; while 350 mg kg^-1 CeO₂ NPs down-regulated 5 photosynthesis genes and 28 auxin-activated genes. Among the key genes of photosynthesis, Ferredoxin-NADP reductase (PetH) was upregulated in 0.7, 7 and 70 mg kg^-1 treatments, while Photosystem II lipoprotein (Psb27) was downregulated under 7, 70 and 350 mg kg^-1 treatments. Top 20 metabolic pathways affected by CeO₂ NPs including plant hormone, amino acids, and glutathione, and carbon metabolism These results provide information about utilizing CeO₂ NPs more safely and effectively in the future.

The interaction mechanisms of co-existing polybrominated diphenyl ethers and engineered nanoparticles in environmental waters: A critical review

This review focuses on the occurrence and interactions of engineered nanoparticles (ENPs) and brominated flame retardants (BFRs) such as polybrominated diphenyl ethers (PBDEs) in water systems and the generation of highly complex compounds in the environment. The release of ENPs and BFRs (e.g. PBDEs) to aquatic environments during their usage and disposal are summarised together with their key interaction mechanisms. The major interaction mechanisms including electrostatic, van der Waals, hydrophobic, molecular bridging and steric, hydrogen and π-bonding, cation bridging and ligand exchange were identified. The presence of ENPs could influence the fate and behaviour of PBDEs through the interactions as well as induced reactions under certain conditions which increases the formation of complex compounds. The interaction leads to alteration of behaviour for PBDEs and their toxic effects to ecological receptors. The intermingled compound (ENPs-BFRs) would show different behaviour from the parental ENPs or BFRs, which are currently lack of investigation. This review provided insights on the interactions of ENPs and BFRs in artificial, environmental water systems and wastewater treatment plants (WWTPs), which are important for a comprehensive risk assessment.

Divergent responses of earthworms (Eisenia fetida) in sandy loam and clay soils to cerium dioxide nanoparticles

The reported biological effects of cerium dioxide nanoparticles (nCeO₂) in soils range from toxic to protective. However, divergences of nCeO₂ toxicity in soils of different textures are not known. In this study, the availability of nCeO₂ on earthworms (Eisenia fetida) in sandy loam soils and clay soils was discussed, and the biological effects of nCeO₂ (0-1000 mg/kg) on earthworms in two soils were investigated. The results showed the bioaccumulation and biological effects of Ce on earthworms in the two soils were inconsistent. The European Community Bureau of Reference (BCR) sequential extraction revealed that the major portions of Ce in both soils were in the residual form (98-99%), and the acid-soluble Ce fraction was greater in clay soils. However, nCeO₂ was more toxic to earthworms in sandy loam soils than that in clay soils as assessed by earthworm biomass, morphology, and antioxidative damage. Thus, the high ecological risk of nCeO₂ in sandy loam soils with higher pH and lower clay contents needs to be avoided, being used in agriculture to improve both crop yield and quality.

Ecotoxicological effects of silver nanoparticles in marine mussels

As the production of silver nanoparticles (AgNPs) is becoming more prevalent, it is becoming increasingly necessary to understand the toxicological effects they can have on different ecosystems. In the marine bioindicator species M. galloprovincialis Lam we predicted toxicity and bioaccumulation of 5 nm alkane-coated and 50 nm uncoated silver nanoparticles (AgNPs) along with silver nitrate as a function of the actual dose level. We generated a time persistence model of silver in seawater and used the Area Under the Curve (AUC) as independent variable in the hazard assessment. This approach allowed us to evaluate unbiased ecotoxicological endpoints for acute (survival) and chronic toxicity (byssal adhesion). Logistic regression analysis rendered an overall LC50_96h values of 0.81 ± 0.07 mg h L^-1 irrespectively of the silver form. By contrast, for byssal adhesion regression analysis revealed a much higher toxicological potential of silver nitrate vs AgNPs with EC50_24h values respectively of 0.0024 ± 0.0009 vs 0.053 ± 0.016 and 0.063 (no computable error for 50 nm AgNP) mg h L^-1, undoubtedly confirming a prevalence of ionic silver effects over AgNPs. Bioaccumulation was more efficient for silver nitrate >5 nm AgNP >50 nm AgNP reflecting a parallel with the preferential uptake route / target organ. Finally, we derived Risk Quotient (RQs) for acute and chronic effects of nanosilver in shellfish and showed that the RQs are far from the Level of Concern (LoC) at current estimated environmental concentrations (EECs). This information can ultimately help researchers, policy makers, and industry professionals decide how to safely regulate and/or dispose of AgNPs.

Proteomics reveals multiple effects of titanium dioxide and silver nanoparticles in the metabolism of turbot, Scophthalmus maximus

Titanium dioxide (TiO₂) and silver (Ag) NPs are among the most used engineered inorganic nanoparticles (NPs); however, their potential effects to marine demersal fish species, are not fully understood. Therefore, this study aimed to assess the proteomic alterations induced by sub-lethal concentrations citrate-coated 25 nm ("P25") TiO₂ or polyvinylpyrrolidone (PVP) coated 15 nm Ag NPs to turbot, Scophthalmus maximus. Juvenile fish were exposed to the NPs through daily feeding for 14 days. The tested concentrations were 0, 0.75 or 1.5 mg of each NPs per kg of fish per day. The determination of NPs, Titanium and Ag levels (sp-ICP-MS/ICP-MS) and histological alterations (Transmission Electron Microscopy) supported proteomic analysis performed in the liver and kidney. Proteomic sample preparation procedure (SP3) was followed by LC-MS/MS. Label-free MS quantification methods were employed to assess differences in protein expression. Functional analysis was performed using STRING web-tool. KEGG Gene Ontology suggested terms were discussed and potential biomarkers of exposure were proposed. Overall, data shows that liver accumulated more elements than kidney, presented more histological alterations (lipid droplets counts and size) and proteomic alterations. The Differentially Expressed Proteins (DEPs) were higher in Ag NPs trial. The functional analysis revealed that both NPs caused enrichment of proteins related to generic processes (metabolic pathways). Ag NPs also affected protein synthesis and nucleic acid transcription, among other processes. Proteins related to thyroid hormone transport (Serpina7) and calcium ion binding (FAT2) were suggested as biomarkers of TiO₂ NPs in liver. For Ag NPs, in kidney (and at a lower degree in liver) proteins related with metabolic activity, metabolism of exogenous substances and oxidative stress (e.g.: NADH dehydrogenase and Cytochrome P450) were suggested as potential biomarkers. Data suggests adverse effects in turbot after medium/long-term exposures and the need for additional studies to validate specific biological applications of these NPs.

Contrasting toxicity of polystyrene nanoplastics to the rotifer Brachionus koreanus in the presence of zinc oxide nanoparticles and zinc ions

Emerging contaminants such as nanoplastics and nanoparticles likely experience similar environmental behaviours, fate and effects but our knowledge of their combined toxicity is scanty. This study, therefore, investigated the joint toxicity of polystyrene nanoplastics (PNPs) and zinc oxide nanoparticles (ZnO-NPs) to an ecologically important rotifer Brachionus koreanus, and compared with the joint toxicity of PNPs and Zn ions (Zn-IONs from ZnSO₄·7H₂O). With increasing concentration, ZnO-NPs formed significant agglomeration with PNPs for up to 1.3 times of the original hydrodynamic size of ZnO-NPs, alongside doubling in their sedimentation and thereby losing 58% of their released Zn ions. In contrast, the availability of Zn-IONs was less affected by the agglomeration and sedimentation of PNPs, with only a loss of 18% of Zn ions at the highest concentration of PNPs. Consequently, as suggested by Concentration Addition and Independent Action models and the Model Deviation Ratios, ZnO-NPs and PNPs exerted an antagonistic interaction whereas Zn-IONs and PNPs exhibited an additive effect. We also advocate the use of the Nonparametric Response Surface method, which is more useful to predict the toxicity of chemical mixtures with interacting effects. Our findings suggested a potential difference between particle-particle and particle-ion interactions, especially at higher test concentrations, which may eventually affect their toxicity. We, therefore, call for a more systematic evaluation of commonly coexisting chemical mixtures which consist of nanoplastics and manufactured nanomaterials.

Colloidal Behavior and Biodegradation of Engineered Carbon-Based Nanomaterials in Aquatic Environment

Carbon-based nanomaterials (CNMs) have attracted a growing interest over the last decades. They have become a material commonly used in industry, consumer products, water purification, and medicine. Despite this, the safety and toxic properties of different types of CNMs are still debatable. Multiple studies in recent years highlight the toxicity of CNMs in relation to aquatic organisms, including bacteria, microalgae, bivalves, sea urchins, and other species. However, the aspects that have significant influence on the toxic properties of CNMs in the aquatic environment are often not considered in research works and require further study. In this work, we summarized the current knowledge of colloidal behavior, transformation, and biodegradation of different types of CNMs, including graphene and graphene-related materials, carbon nanotubes, fullerenes, and carbon quantum dots. The other part of this work represents an overview of the known mechanisms of CNMs' biodegradation and discusses current research works relating to the biodegradation of CNMs in aquatic species. The knowledge about the biodegradation of nanomaterials will facilitate the development of the principals of "biodegradable-by-design" nanoparticles which have promising application in medicine as nano-carriers and represent lower toxicity and risks for living species and the environment.

Modelling the bioconcentration of Zn from commercial sunscreens in the marine bivalve Ruditapes philippinarum

Sunscreens contain ZnO particles used as a UV filter cause adverse effects in the marine environment through the release of this metal into seawater and its bioaccumulation in organisms. A mathematical model using sunscreen colloidal residues, seawater and R. philippinarum clams as differentiated compartments, is proposed in order to interpret both the kinetic pattern and the bioaccumulation of Zn in clams. Two kinetic laboratory experiments were conducted, both with and without clams exposed to sunscreen concentrations from 0 to 200 mg L^-1. Both the lowest value of uptake rate coefficient obtained when 5 mg L^-1 of sunscreen is added (0.00688 L g^-1 d^-1) and the highest obtained at sunscreen addition of 100 mg L^-1 (0.0670 L g^-1 d^-1), predict a lower bioavailability of Zn in a complex medium such as the seawater-sunscreen mixtures, in comparison to those studied in the literature. The efflux rate coefficient from clams to seawater increased from 0 to 0.162 d^-1 with the sunscreen concentrations. The estimated value of the inlet rate coefficient at all studied concentrations indicates that there is a negligible colloidal Zn uptake rate by clams, probably due to the great stability of the organic colloidal residue. An equilibrium shift to higher values of Zn in water is predicted due to the bioconcentration of Zn in clams. The kinetic model proposed with no constant Zn (aq) concentrations may contribute to a more realistic prediction of the bioaccumulation of Zn from sunscreens in clams.

Effects of soil colloids on the aggregation and degradation of engineered nanoparticles (Ti3C2Tx MXene)

Soil colloid is a nonnegligible factor when evaluating the environmental risk of engineered nanoparticles (ENPs) in the groundwater. In this study, the environmental fate of an emerging ENP (Ti₃C₂T_x MXene) in the groundwater was investigated for the first time, which currently poses a severe environmental risk due to its cytotoxicity but has received little attention. The colloidal dispersion stability and degradation kinetics of Ti₃C₂T_x MXene in the groundwater were evaluated by considering the effects of soil colloids prepared from sodium humate (SH), montmorillonite (MT), and a natural soil (NS) under variable solution chemistry. The results showed that the affinity of soil colloids with Ti₃C₂T_x followed an SH > MT > NS sequence. Increasing SH concentration led to Ti₃C₂T_x disaggregation by enhancing the electrical and steric repulsive forces, while MT and NS resulted in hetero-aggregation because of the elevated collision frequency. SH and MT enhanced the critical coagulation concentrations of Ti₃C₂T_x by 100 and 10 folders, respectively, via surface coating process, while NS slightly reduced due to the bridging effects induced by the soluble cations. The soil colloids promoted Ti₃C₂T_x degradation compared with their absence and in an SH > MT ≫ NS sequence. SH and MT were through forming Ti-O-C and Si-O-Ti bonds with Ti₃C₂T_x via their carboxyl and hydroxyl groups, respectively, rendering the Ti₃C₂T_x surface more reactive and faster degradation. NS showed a weak promotion effect because of its less affinity with Ti₃C₂T_x and limited organic matter and clay contents with hydroxyl and carboxyl groups. This study demonstrated the unstable environmental behaviors of Ti₃C₂T_x in the groundwater and mitigated its environmental risk concerns.

In Situ Assay of Interfacial Interaction between ZnO Nanoparticles and Live Cell Disturbed by Surfactants

The interfacial interaction between pollutants and organisms is a critical process in controlling the environmental fates of pollutants; however, in situ assay of the interaction is still a great challenge. Here, in situ determination of dissociation constants (K_d) for ZnO nanoparticles (ZnO NPs) from live algal cells disturbed by different-charged surfactants was established using microscale thermophoresis (MST). Moreover, in situ measurement of the adhesion force between the ZnO NPs probe and live single cell was performed using an atomic force microscope (AFM). Results showed that the cationic cetyltrimethylammonium chloride (CTAC) and anionic sodium dodecylbenzenesulfonate (SDBS) increased but nonionic Triton X-100 (TX-100) decreased the adhesion of ZnO NPs on cells. However, the force signature exhibited a smooth single retracted peak at short distances in the SDBS- and TX-100-treated groups, distinguished from the "see-saw" pattern peak in the CTAC-treated groups. The extended Derjaguin-Landau-Verway-Overbeek (XDLVO) calculation further confirmed that SDBS and TX-100 mainly disturbed the short-range hydration on the NP-cell interface, while CTAC reduced the long-range electrostatic repulsion. Furthermore, an excellent linear correlation between Zn bioaccumulation and two parameters (K_d and adhesion force) indicated that NP-cell interfacial interactions affected Zn bioaccumulation. Thus, in situ assay provides a quantitative basis for the pollutant-organism interfacial interaction to evaluate the environmental fate and ecological risk of pollutants.

Simulation of the Environmental Fate and Transformation of Nano Copper Oxide in a Freshwater Environment

Production of engineered nanomaterials (ENMs) has rapidly increased, yet uncertainty exists regarding the full extent of their environmental implications. This study investigates the fate, transformation, and speciation of nano copper oxide (nanoCuO) released into Lake Waccamaw, North Carolina, over 101 years. Using the Advanced Toxicant module of the Water Quality Analysis Simulation Program (WASP8), we assessed the accumulation and mass proportions of nanoCuO and Cu²⁺ (the product of nanoCuO's dissolution) in the water column and sediments. Our simulations suggest that when nanoCuO is released into Lake Waccamaw, the highest concentrations of both nanoCuO and Cu²⁺ are found in the surface sediments, followed by the subsurface sediments and the water column. Simulating different heteroaggregation attachment efficiencies of nanoCuO suggested that increases in attachment efficiency increased nanoCuO concentrations and mass proportions in the water column and sediments, while Cu²⁺ exhibited the opposite trends. After 101 years, most nanoCuO in the sediments was attached to particulate organic matter and clay particles at all attachment efficiencies, while low attachment efficiency slowed aggregate formation in the water column. Our results highlight the influence that heteroaggregation has on the behavior of nanoCuO inputs and suggest the potential for legacy contamination of nanoCuO and Cu²⁺ in sediments.

The impact of engineered nanomaterials on the environment: Release mechanism, toxicity, transformation, and remediation

The presence and longevity of nanomaterials in the ecosystem, as well as their properties, account for environmental toxicity. When nanomaterials in terrestrial and aquatic systems are exposed to the prevailing environmental conditions, they undergo various transformations such as dissociation, dissolution, and aggregation, which affects the food chain. The toxicity of nanomaterials is influenced by a variety of factors, including environmental factors and its physico-chemical characteristics. Bioaccumulation, biotransformation, and biomagnification are the mechanisms that have been identified for determining the fate of nanomaterials. The route taken by nanomaterials to reach living cells provides us with information about their toxicity profile. This review discusses the recent advances in the transport, transformation, and fate of nanomaterials after they are released into the environment. The review also discusses how nanoparticles affect lower trophic organisms through direct contact, the impact of nanoparticles on higher trophic organisms, and the possible options for remediation.

Roadmap of environmental health research on emerging contaminants: Inspiration from the studies on engineered nanomaterials

Research on the environmental health of emerging contaminants is critical to understand their risks before causing severe harm. However, the low environmental concentrations, complex behaviors, and toxicology of emerging contaminants present enormous challenges for researchers. Here, we reviewed the research on the environmental health of engineered nanomaterials (ENMs), one of the typical emerging contaminants, to enlighten pathways for future research on emerging contaminants at their initial exploratory stage. To date, some developed pretreatment methods and detection technologies have been established for the determination of ENMs in natural environments. The mechanisms underlying the transfer and transformation of ENMs have been systematically explored in laboratory studies. The mechanisms of ENMs-induced toxicity have also been preliminarily clarified at genetic, cellular, individual, and short food chain levels, providing not only a theoretical basis for revealing the risk change and environmental health effects of ENMs in natural environments but also a methodological guidance for studying environmental health of other emerging contaminants. Nonetheless, due to the interaction of multiple environmental factors and the high diversity of organisms in natural environments, health effects observed in laboratory studies likely differ from those in natural environments. We propose a holistic approach and mesocosmic model ecosystems to systematically carry out environmental health research on emerging contaminants, obtaining data that determine the objectivity and accuracy of risk assessment.

Understanding the risks of mercury sulfide nanoparticles in the environment: Formation, presence, and environmental behaviors

Mercury (Hg) could be microbially methylated to the bioaccumulative neurotoxin methylmercury (MeHg), raising health concerns. Understanding the methylation of various Hg species is thus critical in predicting the MeHg risk. Among the known Hg species, mercury sulfide (HgS) is the largest Hg reservoir in the lithosphere and has long been considered to be highly inert. However, with advances in the analytical methods of nanoparticles, HgS nanoparticles (HgS NPs) have recently been detected in various environmental matrices or organisms. Furthermore, pioneering laboratory studies have reported the high bioavailability of HgS NPs. The formation, presence, and transformation (e.g., methylation) of HgS NPs are intricately related to several environmental factors, especially dissolved organic matter (DOM). The complexity of the behavior of HgS NPs and the heterogeneity of DOM prevent us from comprehensively understanding and predicting the risk of HgS NPs. To reveal the role of HgS NPs in Hg biogeochemical cycling, research needs should focus on the following aspects: the formation pathways, the presence, and the environmental behaviors of HgS NPs impacted by the dominant influential factor of DOM. We thus summarized the latest progress in these aspects and proposed future research priorities, e.g., developing the detection techniques of HgS NPs and probing HgS NPs in various matrices, further exploring the interactions between DOM and HgS NPs. Besides, as most of the previous studies were conducted in laboratories, our current knowledge should be further refreshed through field observations, which would help to gain better insights into predicting the Hg risks in natural environment.

Size characterization of nanomaterials in environmental and biological matrices through non-electron microscopic techniques

Engineered nanomaterials (ENs) can enter the environment, and accumulate in food chains, thereby causing environmental and health problems. Size characterization of ENs is critical for further evaluating the interactions among ENs in biological and ecological systems. Although electron microscope is a powerful tool in obtaining the size information, it has limitations when studying nanomaterials in complex matrices. In this review, we summarized non-electron microscope-based techniques, including chromatography-based, mass spectrometry-based, synchrotron radiation- and neutron-based techniques for detecting the size of ENs in environmental and biological matrices. The advantages and disadvantages of these techniques were highlighted. The perspectives on size characterization of ENs in complex matrices were also presented.

Application of α-Fe2O3 nanoparticles in controlling antibiotic resistance gene transport and interception in porous media

Metal oxide nanoparticles (MONPs) with a large specific surface area are expected to bind with antibiotic resistance genes (ARGs), thereby controlling ARGs' contamination by reducing their concentration and mobilization. Here, adsorption experiments were carried out and it was found that α-Fe₂O₃ NPs could chemically bind with ARGs (tetM-carrying plasmids) in water with an adsorption rate of 0.04 min^-1 and an adsorption capacity of 7.88 g/kg. Mixing α-Fe₂O₃ NPs into quartz sand column markedly increased the interceptive removal of ARGs from inflow water. The interception rate of 1.0 μg/mL ARGs in ultrapure water (25 mL, 5 pore volumes) through the sand column (plexiglass, length 8 cm, internal diameter 1.4 cm) with 1 g/kg α-Fe₂O₃ NPs was 1.73 times of that through the pure sand column; the interception rate overall increased with increasing addition of α-Fe₂O₃ NPs, reaching 68.8% with 20 g/kg α-Fe₂O₃ NPs. Coexisting Na⁺ (20 mM), Ca²⁺ (20 mM), and acidic condition (pH 4.0) could further increase the interception rate of ARGs by 1 g/kg α-Fe₂O₃ NPs from 21.1% to 86.2%, 90.7%, and 96.2%, respectively. The presence of PO₄^3- and humic acid at environmentally relevant concentrations would not significantly affect the interception of ARGs. In the treatment groups with PO₄^3- and humic acid, the removal rate decreased by only 1.8% and 0.1%, respectively. In addition, the interceptive removal of ARGs by α-Fe₂O₃ NPs-incorporated sand column was even better in actual surface water samples (87.2%) than that in the ultrapure water (21.1%). The findings provide a promising approach to treat ARGs-polluted water.

Particle-Bound Hg(II) is Available for Microbial Uptake as Revealed by a Whole-Cell Biosensor

Particle-bound mercury (Hg_P), ubiquitously present in aquatic environments, can be methylated into highly toxic methylmercury, but it remains challenging to assess its bioavailability. In this study, we developed anEscherichia coli-based whole-cell biosensor to probe the microbial uptake of inorganic Hg(II) and assess the bioavailability of Hg_P sorbed on natural and model particles. This biosensor can quantitatively distinguish the contribution of dissolved Hg(II) and Hg_P to intracellular Hg. Results showed that the microbial uptake of Hg_P was ubiquitous in the environment, as evidenced by the bioavailability of sorbed-Hg(II) onto particulate matter and model particles (Fe₂O₃, Fe₃O₄, Al₂O₃, and SiO₂). In both oxic and anoxic environments, Hg_P was an important Hg(II) source for microbial uptake, with enhanced bioavailability under anoxic conditions. The composition of particles significantly affected the microbial uptake of Hg_P, with higher bioavailability being observed for Fe₂O₃ and lower for Al₂O₃ particles. The bioavailability of Hg_P varied also with the size of particles. In addition, coating with humic substances and model organic compound (cysteine) on Fe₂O₃ particles decreased the bioavailability of Hg_P. Overall, our findings highlight the role of Hg_P in Hg biogeochemical cycling and shed light on the enhanced Hg-methylation in settling particles and sediments in aquatic environments.

A New Look at the Effects of Engineered ZnO and TiO2 Nanoparticles: Evidence from Transcriptomics Studies

Titanium dioxide (TiO2) and zinc oxide (ZnO) nanoparticles (NPs) have attracted a great deal of attention due to their excellent electrical, optical, whitening, UV-adsorbing and bactericidal properties. The extensive production and utilization of these NPs increases their chances of being released into the environment and conferring unintended biological effects upon exposure. With the increasingly prevalent use of the omics technique, new data are burgeoning which provide a global view on the overall changes induced by exposures to NPs. In this review, we provide an account of the biological effects of ZnO and TiO2 NPs arising from transcriptomics in in vivo and in vitro studies. In addition to studies on humans and mice, we also describe findings on ecotoxicology-related species, such as Danio rerio (zebrafish), Caenorhabditis elegans (nematode) or Arabidopsis thaliana (thale cress). Based on evidence from transcriptomics studies, we discuss particle-induced biological effects, including cytotoxicity, developmental alterations and immune responses, that are dependent on both material-intrinsic and acquired/transformed properties. This review seeks to provide a holistic insight into the global changes induced by ZnO and TiO2 NPs pertinent to human and ecotoxicology.

A critical review on the role of abiotic factors on the transformation, environmental identity and toxicity of engineered nanomaterials in aquatic environment

Engineered nanomaterials (ENMs) are at the forefront of many technological breakthroughs in science and engineering. The extensive use of ENMs in several consumer products has resulted in their release to the aquatic environment. ENMs entering the aquatic ecosystem undergo a dynamic transformation as they interact with organic and inorganic constituents present in aquatic environment, specifically abiotic factors such as NOM and clay minerals, and attain an environmental identity. Thus, a greater understanding of ENM-abiotic factors interactions is required for an improved risk assessment and sustainable management of ENMs contamination in the aquatic environment. This review integrates fundamental aspects of ENMs transformation in aquatic environment as impacted by abiotic factors, and delineates the recent advances in bioavailability and ecotoxicity of ENMs in relation to risk assessment for ENMs-contaminated aquatic ecosystem. It specifically discusses the mechanism of transformation of different ENMs (metals, metal oxides and carbon based nanomaterials) following their interaction with the two most common abiotic factors NOM and clay minerals present within the aquatic ecosystem. The review critically discusses the impact of these mechanisms on the altered ecotoxicity of ENMs including the impact of such transformation at the genomic level. Finally, it identifies the gaps in our current understanding of the role of abiotic factors on the transformation of ENMs and paves the way for the future research areas.

Flow-Injection Methods in Water Analysis-Recent Developments

Widespread demand for the analysis and control of water quality and supply for human activity and ecosystem sustainability has necessitated the continuous improvement of water analysis methods in terms of their reliability, efficiency, and costs. To satisfy these requirements, flow-injection analysis using different detection methods has successfully been developed in recent decades. This review, based on about 100 original research papers, presents the achievements in this field over the past ten years. Various methodologies for establishing flow-injection measurements are reviewed, together with microfluidics and portable systems. The developed applications mostly concern not only the determination of inorganic analytes but also the speciation analysis of different elements, and the determination of several total indices of water quality. Examples of the determination of organic residues (e.g., pesticides, phenolic compounds, and surfactants) in natural surface waters, seawater, groundwater, and drinking water have also been identified. Usually, changes in the format of manual procedures for flow-injection determination results in the improvement of various operational parameters, such as the limits of detection, the sampling rate, or selectivity in different matrices.

Size-dependent transformation, uptake, and transportation of SeNPs in a wheat-soil system

Foliar application of selenium nanoparticles (SeNPs) has been used to enhance Se concentration in winter wheat, but soil application of SeNPs on Se uptake in the crop and their transformation in soil are still limited. This study investigated the effects of varying sizes (50, 100, 200 nm) and concentrations (0, 2, 5, 25, 100 mg kg^-1) of chemical synthesized SeNPs in soil on uptake and accumulation of Se in the crop at maturity and related mechanisms. SeNPs not only posed very low toxic to plant growth, except for leaf, but also significantly enhanced grain Se concentration. Regardless of concentration of SeNPs added to soil, the transformation rate of the larger sized SeNPs (200 nm) in soil was significantly (p < 0.05) higher than that of the smaller one, which is mainly due to the latter was more easily adsorbed onto soil organic matter and reluctant to be oxidized. Significantly higher grain Se concentration under the larger sized SeNPs contributed to significantly higher transformation rate of SeNPs and concentration of available Se in soil. The present study showed that the larger sized SeNPs in soil had significant advantages including higher grain Se concentration and Se utilization efficiency for wheat Se biofortification.

Pristine and sulfidized ZnO nanoparticles alter microbial community structure and nitrogen cycling in freshwater lakes

Zinc oxide nanoparticles (ZnO NPs) and its sulfidized form (ZnS NPs) are increasingly entering into freshwater systems through multiple pathways. However, their impacts on the composition and function of sedimentary microbial communities are still largely unknown. Here, two kinds of lake-derived microcosms were constructed and incubated with ZnO NPs, or ZnS NPs to investigate the short-term (7 days) and long-term (50 days) impacts on sedimentary microbial communities and nitrogen cycling. After 7 days, both ZnO NPs and ZnS NPs dosed microbial communities experienced distinct alterations as compared to the undosed controls. By day 50, the structural shifts of microbial communities caused by ZnO NPs were significantly enlarged, while the microbial shifts induced by ZnS NPs were largely resolved. Additionally, ZnO NPs and ZnS NPs could significantly alter nitrogen species and nitrogen cycling genes in sediments, revealing their non-negligible impacts on nitrogen cycling processes. Furthermore, our data clearly indicated that the impacts of ZnO NPs and ZnS NPs on nitrogen cycling differed distinctly in different lake-derived microcosms, and the impacts were significantly correlated with microbial community structure. Overall, this research suggests that the entrance of pristine or sulfidized ZnO NPs into freshwater systems may significantly impact the sedimentary microbial community structure and nitrogen cycling.

Metal/Metalloid-Based Nanomaterials for Plant Abiotic Stress Tolerance: An Overview of the Mechanisms

In agriculture, abiotic stress is one of the critical issues impacting the crop productivity and yield. Such stress factors lead to the generation of reactive oxygen species, membrane damage, and other plant metabolic activities. To neutralize the harmful effects of abiotic stress, several strategies have been employed that include the utilization of nanomaterials. Nanomaterials are now gaining attention worldwide to protect plant growth against abiotic stresses such as drought, salinity, heavy metals, extreme temperatures, flooding, etc. However, their behavior is significantly impacted by the dose in which they are being used in agriculture. Furthermore, the action of nanomaterials in plants under various stresses still require understanding. Hence, with this background, the present review envisages to highlight beneficial role of nanomaterials in plants, their mode of action, and their mechanism in overcoming various abiotic stresses. It also emphasizes upon antioxidant activities of different nanomaterials and their dose-dependent variability in plants' growth under stress. Nevertheless, limitations of using nanomaterials in agriculture are also presented in this review.

Phyto-complexation of galactomannan-stabilized calcium hydroxide and selenium-calcium hydroxide nanocomposite to enhance the seed-priming effect in Vigna radiata

The evaluation of nano-priming effect with galactomannan stabilized Phyto-complexed calcium hydroxide (Ca(OH)₂), selenium oxyanion‑calcium hydroxide SeO-(Ca(OH)₂), and selenium‑calcium hydroxide Se-(Ca(OH)₂) nanocomposites was carried out in Vigna radiata (Green gram) seeds. The green source Cassia angustifolia seed rich in galactomannan and other phytoconstituents was detected experimentally and characterized with GC-MS, UV, FT-IR, NMR, XRD, and SEM studies. The highly active galactomannan and other biomolecules, enable their terminal oxygen and hydroxide groups to bind with calcium and selenium ions through bidentate and monodentate chelation, followed by bio-reduction. On the mild-thermal agitation, bio-stabilized (Ca(OH)₂), SeO-(Ca(OH)₂), and Se-(Ca(OH)₂) nanocomposite coated with seed-derived biomolecules were precipitated under an alkaline condition. The size and morphological parameters of bio-fabricated nanocomposites were characterized to exhibit the spherical and hexagonal shape in nanoscale images of size 17.9 nm for (Ca(OH)₂), 56.2 nm for SeO-(Ca(OH)₂), and 69.3 nm Se-(Ca(OH)₂). The sub-standard seed lot of Vigna radiata (Green gram) seeds (71%) was examined using synthesized nanocomposites at various concentrations, and the obtained physiological parameters in seedlings were compared with hydro-primed seeds. The nano-priming action of all the Phyto-complexed nanocomposites was predicted with a positive response, where the porous Se-(Ca(OH)₂) possess high efficacy interaction on seed embryos and beneficially results at 90% germination.

Effects of ZnO nanoparticles and its bulk form on growth, antioxidant defense system and expression of oxidative stress related genes in Hordeum vulgare L

A comparative analysis of physio-biochemical indices and transcriptional activity of oxidative stress genes in barley (Hordeum vulgare L.) seedlings after 7-days exposure to bulk- and nano-ZnO (300 and 2000 mg/L) was carried out. A dose-dependent reduction in the length and weight of roots and shoots, as well as a significant accumulation of Zn in plant parts, was shown. Alterations in the shape and size of organelles, cytoplasmic vacuolization, and chloroplast and mitochondrial disorganization were also revealed. These processes are particularly pronounced when H. vulgare is exposed to the higher concentrations of nano-ZnO. The study of the antioxidant defense system revealed mainly an increase in the level of reduced glutathione and the activities of superoxide dismutase (SOD), catalase (CAT), glutathione reductase (GR), and glutathione S-transferase (GST). The increases in activity, by 4-fold and 3-fold, was found for glutathione transferase in the roots when exposed to 2000 mg/L bulk- and nano-ZnO, respectively. The study of transcriptional activity demonstrated that in the roots under the influence of bulk- and nano-ZnO, along with Mn-SOD, Fe-SOD is highly expressed, mainly associated with the protection of chloroplasts. Analysis of the Cat 1 and Cat 2 gene expression showed that the main contribution to the increase in catalase activity in treated H. vulgare is made by the CAT-1 isozyme. Generally, in response to the impact of the studied ZnO forms, the antioxidant defense system is activated in H. vulgare, which effectively prevents the progression of oxidative stress in early stages of plant ontogenesis. Nevertheless, with constant exposure to bulk- and nano-ZnO at high concentrations, such activation leads to a depletion of the plant's energy resources, which negatively affects its growth and development. The results obtained could be useful in predicting the risks associated with the further transfer of nano-ZnO to the environment.

Aquatic Environment Exposure and Toxicity of Engineered Nanomaterials Released from Nano-Enabled Products: Current Status and Data Needs

Rapid commercialisation of nano-enabled products (NEPs) elevates the potential environmental release of engineered nanomaterials (ENMs) along the product life cycle. The current review examined the state of the art literature on aquatic environment exposure and ecotoxicity of product released (PR) engineered nanomaterials (PR-ENMs). Additionally, the data obtained were applied to estimate the risk posed by PR-ENMs to various trophic levels of aquatic biota as a means of identifying priority NEPs cases that may require attention with regards to examining environmental implications. Overall, the PR-ENMs are predominantly associated with the matrix of the respective NEPs, a factor that often hinders proper isolation of nano-driven toxicity effects. Nevertheless, some studies have attributed the toxicity basis of observed adverse effects to a combination of the released ions, ENMs and other components of NEPs. Notwithstanding the limitation of current ecotoxicology data limitations, the risk estimated herein points to an elevated risk towards fish arising from fabrics' PR-nAg, and the considerable potential effects from sunscreens' PR-nZnO and PR-nTiO2 to algae, echinoderms, and crustaceans (PR-nZnO), whereas PR-nTiO2 poses no significant risk to echinoderms. Considering that the current data limitations will not be overcome immediately, we recommend the careful application of similar risk estimation to isolate/prioritise cases of NEPs for detailed characterisation of ENMs' release and effects in aquatic environments.

Exposure to zinc oxide nanoparticles (ZnO-NPs) induces cardiovascular toxicity and exacerbates pathogenesis - Role of oxidative stress and MAPK signaling

The precise toxico-pathogenic effects of zinc oxide nanoparticles (ZnO-NPs) on the cardiovascular system under normal and cardiovascular disease (CVD) risk factor milieu are unclear. In this study, we have investigated the dose-dependent effects of ZnO-NPs on developing chicken embryo and cell culture (H9c2 cardiomyoblast, HUVEC and aortic VSMC) models. In addition, the potentiation effect of ZnO-NPs on simulated risk factor conditions was evaluated using; 1. Reactive oxygen species (ROS) induced cardiac remodeling, 2. Angiotensin-II induced cardiac hypertrophy, 3. TNF-α induced HUVEC cell death and 4. Inorganic phosphate (Pi) induced aortic VSMC calcification models. The observed results illustrates that ZnO-NPs exposure down regulates vascular development and elevates oxidative stress in heart tissue. At the cellular level, ZnO-NPs exposure reduced the cell viability and increased the intracellular ROS generation, lipid peroxidation and caspase-3 activity in a dose-dependent manner in all three cell types. In addition, ZnO-NPs exposure significantly suppressed the endothelial nitric oxide (NO) generation, cardiac Ca²⁺ - ATPase activity and enhanced the cardiac mitochondrial swelling. Moreover, inhibition of p38 MAPK and JNK signaling pathways influence the cytotoxicity. Overall, ZnO-NPs exposure affects the cardiovascular system under normal conditions and it exacerbates the cardiovascular pathogenesis under selected risk factor milieu.

Enhanced Bioaccumulation and Toxicity of Arsenic in Marine Mussel Perna viridis in the Presence of CuO/Fe3O4 Nanoparticles

Leakage of metal oxide nanoparticles (MNPs) into marine environments is inevitable with the increasing use of MNPs. However, little is known about the effects of these lately emerged MNPs on the bioaccumulation and toxicity of pre-existing contaminants in marine biota. The current study therefore investigated the effects of two common MNPs, CuO nanoparticles (nCuO) and Fe₃O₄ nanoparticles (nFe₃O₄), on bioaccumulation and toxicity of arsenic (As) in green mussel Perna viridis. Newly introduced MNPs remarkably promoted the accumulation of As and disrupted the As distribution in mussels because of the strong adsorption of As onto MNPs. Moreover, MNPs enhanced the toxicity of As by disturbing osmoregulation in mussels, which could be supported by decreased activity of Na⁺-K⁺-ATPase and average weight loss of mussels after MNPs exposure. In addition, the enhanced toxicity of As in mussels might be due to that MNPs reduced the biotransformation efficiency of more toxic inorganic As to less toxic organic As, showing an inhibitory effect on As detoxifying process of mussels. This could be further demonstrated by the overproduction of reactive oxygen species (ROS), as implied by the rise in quantities of superoxide dismutase (SOD) and lipid peroxidation (LPO), and subsequently restraining the glutathione-S-transferases (GST) activity and glutathione (GSH) content in mussels. Taken together, this study elucidated that MNPs may elevate As bioaccumulation and limit As biotransformation in mussels, which would result in an enhanced ecotoxicity of As towards marine organisms.

Ion compositions in artificial media control the impact of humic acid on colloidal behaviour, dissolution and speciation of CuO-NP

The toxicity of copper oxide nanoparticles (CuO-NP) strongly depends on their interactions with the surrounding environment, impacting their dissolution and colloidal stability. This behaviour is studied quite extensively for simplified electrolytes, but information on the behaviour of CuO-NP in more complex artificial media are lacking. In our study, we analysed the colloidal behaviour and considered the speciation of CuO-NP in pure water and three artificial media of different complexity which are used in ecotoxicology. Measurements were done over 7 days in the absence and presence of humic acid (HA) as a model organic molecule. In pure water, the addition of HA lowered the zeta potential from +11 to -41 mV, while in all artificial media, it stayed constantly at about -20 mV. The hydrodynamic diameter of CuO-NP remained unaffected by HA in pure water and seawater, while in porewater and especially in freshwater, HA suppressed strong agglomeration. In pure water, HA strongly increased dissolution to the highest observed value (3% of total Cu), while HA reduced dissolution in all artificial media. Speciation calculations revealed that cations from the media competed with Cu from the NP surface for complexing sites of the HA. This competition may have caused the reduced dissolution in the presence of ions. Furthermore, speciation calculations also suggest that ion composition drove agglomeration behaviour rather than ion concentration: agglomeration was high when divalent cations where the major interaction partner and dominant in relative terms. HA may have reduced the relative dominance and thus altered the agglomeration, aligning it in all media. Summarizing, ion composition and the presence of HA strongly drive the dissolution and agglomeration of CuO-NP in artificial media, consequently, analysing complexation can help to predict environmental behaviour and toxicity.

Long-term dissolution and transformation of ZnO in soils: The roles of soil pH and ZnO particle size

The ongoing use of ZnO nanoparticles (NPs)-associated commercial products results in large release of ZnO NPs into soils and has prompted systematic investigation regarding their fractionation and fate in soils. To date, little information is available about the long-term dissolution and transformation of ZnO NPs in different soils. The distribution and speciation of Zn in two different soils (i.e., Red soil (RS) and Wushantu soil (WS)) treated with either ZnO NPs or bulk ZnO were elucidated by combining soil incubation study with synchrotron-based techniques. Results revealed that ZnO NPs and bulk ZnO were almost dissolved after 1 day, indicating their rapid dissolution upon entering RS (pH-acidic). Rapid dissolution of ZnO NPs was also observed even in WS (pH- circumneutral). The solubilized Zn²⁺ released from ZnO particles was completely transformed into stable forms (e.g., Zn-Al LDH, Zn-OM, and Zn(OH)₂) and Zn-Al LDH was the dominant species in WS after incubation for 360 days. A majority of solubilized Zn²⁺ released from ZnO particles was also transformed into Zn-Al LDH precipitate in RS. The findings of this study facilitate a better understanding of the fate of ZnO in soils, which could be leveraged for remediation of ZnO-polluted soils.

Metallic oxide nanomaterials act as antioxidant nanozymes in higher plants: Trends, meta-analysis, and prospect

Improving plant resistance against various environmental stresses is crucial to gain higher agricultural productivity for meeting future food demands of the fast-growing global population. Nanozymes, nanomaterials (NMs) with enzyme-like activity, have shown the potential to defend environmental stresses via scavenging reactive oxygen species (ROS) and augmenting the inherent antioxidant functions of plants. However, several studies confirmed that NMs could cause oxidative damage triggered by excessive ROS. In this study, the conversion mechanism between antioxidant and oxidant activities of metallic oxidative nanozymes was systematically reviewed and evaluated using meta-analysis approach. Moreover, our work attempts to seek the optimal dose and physicochemical property of antioxidant-functionalized NMs and put forward future research directions. The meta-analysis results indicated that NMs at a low dose (below 20 ppm) exhibited antioxidant activity which could scavenge ROS and alleviate their deleterious impacts. Conversely, their oxidant activity was activated at the exposure dose above 200 ppm which might induce ROS overproduction and lead to oxidative stress. Further, root exposure tends to stimulate the oxidant activity of NMs, and the NMs modification is highly promising for improving their bioavailability. A SWOT analysis was conducted to evaluate the strengths, weaknesses, opportunities, and threats of agro-applied nanozymes. Therefore, the rational design and development of nanozymes for better antioxidant potential will be beneficial to their applications in agriculture.

The impacts of metal-based engineered nanomaterial mixtures on microbial systems: A review

The last decade has witnessed tremendous growth in the commercial use of metal-based engineered nanomaterials (ENMs) for a wide range of products and processes. Consequently, direct and indirect release into environmental systems may no longer be considered negligible or insignificant. Yet, there is an active debate as to whether there are real risks to human or ecological health with environmental exposure to ENMs. Previous research has focused primarily on the acute effects of individual ENMs using pure cultures under controlled laboratory environments, which may not accurately reveal the ecological impacts of ENMs under real environmental conditions. The goal of this review is to assess our current understanding of ENM effects as we move from exposure of single to multiple ENMs or microbial species. For instance, are ENMs' impacts on microbial communities predicted by their intrinsic physical or chemical characteristics or their effects on single microbial populations; how do chronic ENM interactions compare to acute toxicity; does behavior under simplified laboratory conditions reflect that in environmental media; finally, is biological stress modified by interactions in ENM mixtures relative to that of individual ENM? This review summarizes key findings and our evolving understanding of the ecological effects of ENMs under complex environmental conditions on microbial systems, identifies the gaps in our current knowledge, and indicates the direction of future research.

Nanoadsorbents in focus for the remediation of environmentally-related contaminants with rising toxicity concerns

Modern lifestyle demands high-end commodities, for instance, cosmetics, detergents, shampoos, household cleaning, sanitary items, medicines, and so forth. In recent years, these products' consumption has increased considerably, being antibiotics and some other pharmaceutical and personal care products (PPCPs). Several antibiotics and PPCPs represent a wide range of emerging contaminants with a straight ingress into aquatic systems, given their high persistence in seawater, effluent treatment plants, and even drinking water. Under these considerations, the necessity of developing new and affordable technologies for the treatment and sustainable mitigation of pollutants is highly requisite for a safer and cleaner environment. One possible mitigation solution is an effective deployment of nanotechnological cues as promising matrices that can contribute by attending issues and improving the current strategies to detect, prevent, and mitigate hazardous pollutants in water. Focused on nanoparticles' distinctive physical and chemical properties, such as high surface area, small size, and shape, metallic nanoparticles (MNPs) have been investigated for water remediation. MNPs gained increasing interest among research groups due to their superior efficiency, stability, and high catalyst activity compared with conventional systems. This review summarizes the occurrence of antibiotics and PPCPs and the application of MNPs as pollutant mitigators in the aquatic environment. The work also focuses on transportation fate, toxicity, and current regulations for environmental safety.