Environmentally sustainable processes for the synthesis of hydroxyapatite

Biocompatibility and periodontal regenerative potential of hydroxyapatite nanoparticles from Portunus Sanguinolentus Shells: A crystallographic, morphological, and molecular gene expression analysis

OBJECTIVES

This study aims to extract and characterize hydroxyapatite (HAp) nanoparticles from the exoskeleton of Portunus sanguinolentus (blood-spotted swimming crab) shells for potential biomedical applications, particularly in bone tissue engineering and periodontal regenerative dentistry.

MATERIALS AND METHODS

Crab shells were cleaned, dried at 100 °C, and ground into powder. The powder was sintered at 1000 °C to obtain calcium carbonate (CaCO₃), which was then reacted with diammonium hydrogen phosphate [(NH₄)₂HPO₄]. in double-distilled water using a wet chemical method at pH >9. The precipitate was filtered, dried at 100 °C, and sintered at 800 °C to synthesize HAp nanoparticles. Characterization using FTIR, EDX, XRD, and SEM confirmed the nanoparticles' chemical composition, crystallinity, and nanoscale morphology. Biocompatibility was evaluated through MTT and live/dead cell assays on human gingival fibroblasts (HGF) and periodontal ligament fibroblasts (HPDLF). Osteogenic potential was assessed via real-time qPCR for ALP, BMP2, and RUNX2 gene expression and Alizarin Red S staining for calcium mineralization. Statistical analysis was conducted using ANOVA with Tukey's test.

CONCLUSION

Results demonstrated that crab shell-derived HAp nanoparticles exhibited excellent crystallinity, biocompatibility, and osteogenic potential. Enhanced cell viability and significant upregulation of osteogenic markers confirmed their role in periodontal bone regeneration. Increased calcium deposition further validated their extracellular matrix mineralization capability. These findings suggest that Portunus sanguinolentus-derived HAp nanoparticles are a promising, sustainable biomaterial for periodontal regenerative applications.

CLINICAL SIGNIFICANCE

The use of Portunus sanguinolentus-derived hydroxyapatite presents a sustainable and cost-effective alternative to synthetic biomaterials in dental applications. With excellent biocompatibility and the ability to promote osteogenic differentiation, these nanoparticles hold promise for bone grafting, implant coatings, and periodontal regeneration, supporting eco-friendly and efficient solutions for clinical bone repair and regenerative dentistry.

Advances of Hydroxyapatite Nanoparticles in Dental Implant Applications

Hydroxyapatite nanoparticles (HANPs) are becoming increasingly crucial in dental implant applications as they are highly compatible with biological systems, actively support biological processes, and closely resemble bone minerals. This review covers the latest progress in how HANPs are made, studied, and used in dentistry. It looks at critical methods for creating HANPs, such as sol-gel, microwave hydrothermal synthesis, and biomimetic approaches, and how they affect the particles' size, structure, and activity. The green synthesis method illustrated a new door to synthesize HAp for maintaining biocompatibilityand increasing antibacterial properties. The review also explores how HANPs improve the integration of implants with bone, support bone growth, and help treat sensitive teeth based on various laboratory and clinical studies. The usage of HAp in dentin and enamel shows higher potentiality through FTIR, XPS, XRD, EDS, etc., for mechanical stability and biological balance compared to natural teeth. Additionally, the use of HANPs in dental products like toothpaste and mouthwash is discussed, highlighting its potential to help rebuild tooth enamel and fight bacteria. There are some challenges for long-term usage against oral bacteria, but doping with inorganic materials, like Zn, has already solved this periodontal problem. Much more research is still essential to estimate the fabrication variation based on patient problems and characteristics. Still, it has favorable outcomes regarding its bioactive nature and antimicrobial properties. Due to their compatibility with biological tissues and ability to support bone growth, HANPs hold great promise for advancing dental materials and implant technology, potentially leading to better dental care and patient outcomes.

Eggshell-derived hydroxyapatite as a biomaterial in dentistry: a scoping review of synthesis, properties and applications

BACKGROUND

Hydroxyapatite (HAp) derived from chicken eggshells has recently gained significant interest in tissue engineering and regenerative medicine. This paper aims to review the synthesis, properties and applications of eggshell-derived hydroxyapatite (E-HAp) in dentistry.

METHODS

A comprehensive literature search was conducted in PubMed and Scopus databases, along with a grey literature search. The references of selected studies were also manually reviewed to identify additional relevant articles. No restrictions were applied for language or publication year. Two independent reviewers carried out the study selection and data extraction processes.

RESULTS

Seventeen studies met the inclusion criteria and were included in the qualitative analysis. Most studies were in vitro investigations focused on applications such as dentinal tubule sealing (n = 4) and remineralization of initial enamel caries lesions (n = 4). E-HAp was also studied for tissue engineering applications, including alveolar ridge preservation as a bone graft material (n = 5) and periodontal regeneration (n = 2). Additional applications included regenerative endodontics (n = 3) and use as a pulp capping agent (n = 2).

CONCLUSION

E-HAp shows a wide range of applications in dentistry, particularly in tissue engineering and regenerative dentistry, marking it as a promising biomaterial in dentistry.

Evolution and recent development of cellulose-modified, nucleic acid-based and green nanosensors for trace heavy metal ion analyses in complex media: A review

With increased manufacturing activities and energy sector development, monitoring of heavy metal ion (HMI) pollution is becoming increasingly pressing. The discharge of metals from industrial effluents into the waterways could cause major economic and environmental disruption. In situ and on-site detection methods of trace HMIs can be effective countermeasures before the toxicity spreads out to larger areas, affecting the ecosystem. Conventional methods are often lacking in portability and costly. In contrast, electrochemical sensing, especially with nanoplatforms, is promising for trace detection of HMIs in complex media because of the ease of fabrication and adaptability of incorporating green technology. Appropriate electrode selection with suitable modifiers is crucial in complex medium analyses to overcome electrode fouling. In this review, the evolution from metal-based and carbon-based electrodes to advancements in electrode modification involving agro/biocomposite nanomaterials (NMs) such as cellulose, chitosan, and hydroxyapatite is discussed. The fabrication of nucleic acid-based aptasensors for analyzing HMIs and the adoption of smart systems based on microfluidics with high selectivity, operational stability, and sensitivity are highlighted. The challenges and future prospects for trace HMI determination based on electrochemical sensors in real complex media, including blood and industrial effluent or wastewater, are critically examined.

A new eggshell-derived calcium phosphate bioceramic for tissue engineering: cytotoxicity and histomorphometric study

PURPOSE

To evaluate cytotoxicity and tissue repair of a new chicken eggshell-derived bioceramic (hydroxyapatite/dicalcium phosphate anhydrous-HA/DCPA).

METHODS

Cytotoxicity was evaluated in fibroblasts (L cell, L-929) by MTT test. Tissue repair of HA/DCPA was compared to HA/β-TCP bioceramic (Maxresorb-MXR). Two critical-sized bone defects (CSDs) were drilled in the calvarial of 24 Wistar rats and filled with one of the biomaterials. The animals were euthanized after 30, 60, and 90 days, and bone specimens were examined by histomorphometric analyses, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The percentages of newly formed bone, connective tissue, remaining biomaterial, and total tissue repair area were compared between groups using Student's t-test and analysis of variance (p ≤ 0.05).

RESULTS

HA/DCPA did not exhibit any cytotoxicity. CSDs contained newly formed bone from the defect margins and from ossification centers interspersed throughout the biomaterials. At 30 days, HA/DCPA group had a significantly larger total tissue repair area than MXR group (p = 0.047). No differences were observed between groups regarding variables studied (p > 0.05).

CONCLUSION

HA/DCPA is non-cytotoxic. This cement promoted new bone formation and tissue filling of the entire defect area with degree of biomaterial degradation similar to HA/β-TCP, proving to be equally suitable and successful for bone regeneration.

Physicochemical characterization and effects of monetite obtained from titania-reinforced eggshell on bone repair: a new possibility for tissue bioengineering?

OBJECTIVES

To carry out physicomechanical characterization of the HA/DCPA/TiO2 and to evaluate the tissue repair in rat calvaria.

METHODS

Two bone defects were made in the calvaria of 36 Wistar rats, divided into groups: HA/DCPA, HA/DCPA/TiO2 and sham (blood clot). The animals were euthanized at 30, 60 and 90 days and calvaria slides were processed with hematoxylin/eosin. The newly formed bone, connective tissue, biomaterial remnant, and total tissue repair percentages were calculated in relation to the total defect area. The HA/DCPA/TiO2 was characterized structurally by scanning electron microscopy (SEM), and chemically by energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). It was submitted to apparent density (AD), apparent porosity (AP), water absorption (WA) and compressive strength (CS) physical tests. The ANOVA test was applied, followed by Turkey's test and Student's t-test (p ≤ 0,05).

RESULTS

The SEM showed biomaterials inside the bone defects and newly formed bone. EDS identified oxygen, calcium, phosphorus, and titanium in the sample. The HA/DCPA/TiO2 and HA/DCPA groups presented a total tissue repair area that was larger than the sham group (p < 0.001).

CONCLUSIONS

The physical-mechanical assays showed that HA/DCPA/TiO2 has AD and CS properties within the limits of trabecular bone and with values higher than HA/DCPA.HA/DCPA/TiO2 presented higher densification and compressive strength rates than HA/DCPA.

CLINICAL RELEVANCE

Potential as a scaffold for bone.

3D scaffold of hydroxyapatite/β tricalcium phosphate from mussel shells: Synthesis, characterization and cytotoxicity

Bone tissue substitutes are increasing in importance. Hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP) act as a cell matrix and improve its mechanical properties. One of their raw materials is marine-origin by-products.

OBJECTIVES

To synthesize, characterize, and evaluate the cellular cytotoxicity of a 3D biomaterial based on HA and β-TCP from mussel shells.

METHODS

We prepared pellets with 150, 200, and 250 mg and evaluated them through sintering, XRD, FTIR, ICP-OES, Scanning Electron Microscopic (SEM), and immunocytochemical tests. The Alamar Blue method was applied to the Balb-T3T cell line within 72 h to evaluate cytotoxicity.

RESULTS

Our biomaterials presented a smooth surface with slight irregularity and porosities presenting different diameters and morphologies and showed chemical, morphological, and ultrastructural similarity to bone hydroxyapatite, mainly the 150 and 200 mg pellets.

SIGNIFICANCE

We produced promising HA/β-TCP bioceramics with characteristics that allowed cell culture, promoting adhesion, spreading, and proliferation.

Composites formed by layered double hydroxides with inorganic compounds: An overview of the synthesis methods and characteristics

Nowadays, layered double hydroxides (LDH), sometimes referred as hydrotalcite-like compounds, have gained great attention since their composition and structure can be easily modified, so that they can be implemented in multiple fields. LDH-based composite materials based on LDH exhibit tremendously improved properties such as high specific surface area, which promotes the accessibility to a greater number of LDH active sites, considerably improving their catalytic, adsorbent and biological activities. Therefore, this review summarizes and discusses the synthesis methods of composites constituted by LDH with other inorganic compounds such as zeolites, cationic clays, hydroxyapatites, among many others, and describe the resulting characteristics of the resulting composites, emphasizing the morphology. Brief descriptions of their properties and applications are also included.

In Situ Synthesis and Characterizations of a Strontium-Substituted Dicalcium Phosphate Anhydrous/Hydroxyapatite Biphasic Whisker and Its Properties Evaluation

Dicalcium phosphate anhydrous (DCPA) presents good biomineralization ability, the strontium element is known for superior bone affinity, and a whisker possesses good mechanical strength; all these are beneficial for improving the drawbacks of hydroxyapatite (HAP) like weaker mechanical properties, poor biomineralization, and slower degradation/absorption. Therefore, a homogeneous precipitation was adopted to synthesize Sr-substituted and DCPA and HAP coexisting whiskers. The composition, structure, and morphology based on urea dosage and substitution content were characterized, and the roles of DCPA, Sr, and whisker shape were investigated. It turned out that Sr-DCPA/HAP biphasic products contained about 19% DCPA and 81% HAP, and both phases occupied the outer and inner parts of the whisker, respectively. Increasing the urea dosage made the morphology transform from a sea urchin shape to fiber clusters and then whiskers, while Sr substitution brought the whisker back to the porous microsphere shape. Only 5% of Sr content and 15 g of urea could maintain the whisker shape. Sr could promote the proliferation of MC3T3-E1 cells even at a higher extract concentration of 10 mg/mL. The cells stayed in a healthy state whether cocultured with the whisker or the microsphere. The unstable DCPA combined with the decreased crystallinity brought by Sr doping contributed to shortening the apatite deposition period to within 7 days. The whisker morphology enhanced the compressive strength of acrylic resin, and the apatite layer helped to reduce the strength loss during soaking. The Sr-DCPA/HAP biphasic whisker with enhanced overall properties possessed more promising potential for biomedical application.

Synthesis and Application of Sustainable Tricalcium Phosphate Based Biomaterials From Agro-Based Materials: A Review

Trends in health care delivery systems have shifted as a result of the modern uses of biomaterials in medicine. Contrary to traditional medicine, modern healthcare are now useful in solving problems that were considered impossible some years back. One of the most significant factors to the most recent advancements in implant development has been the use of calcium based materials in the creation of necessary implants in the form of soft and hard tissues. With the advent of naturally sourced materials in the manufacturing of biomaterials, lots of attention are now focused on the different sources of agro-based resources that can be used for the product developments. These agro-based materials are now been considered for sustainable and ecological purposes in several areas of applications globally in the recent times. Hence, the review was carried out with focus on the sources, relevance, processing techniques and applications of tricalcium phosphate based biomaterials in modern day healthcare delivery. This review provides a historical and prospective picture of the crucial functions that materials based on tricalcium phosphate will play in fulfilling human requirements for medication.

Are we approaching the development of a novel calcium phosphate-based bioceramic dental material?

OBJECTIVES

Develop a sustainable bovine hydroxyapatite dental ceramic with the addition of titanium dioxide (TiO2) nanoparticles (5 % and 8 % by weight), analyzing the outcome of this addition to the microstructure, as well as its mechanical and chemical properties, in order to evaluate whether they satisfy the International Organization for Standardization (ISO) 6872:2015 for dental ceramics or not.

METHODS

Disks were obtained through uniaxial followed by isostatic pressing from bovine hydroxyapatite powder and TiO2 nanoparticles and sintered at 1300ºC for 2 h. Three experimental groups were developed (HA, HA+5 %TiO2 and HA+8 %TiO2) and subjected to X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), indentation fracture (IF), biaxial flexural strength (BFS) and chemical solubility test.

RESULTS

XRD revealed, for HA group, the appearance of a peak corresponding to b-tricalcium phosphate (ß-TCP). For HA+ 5 %TiO2 and HA+ 8 %TiO2, the entire composition was converted into ß-TCP and calcium titanate (CaTiO3). The SEM images showed a dense ceramic matrix and a uniform distribution of another phase in groups with TiO2 nanoparticles. HA+ 5 %TiO2 (1.40 ± 0.18 MPa.m1/2) and HA+ 8 %TiO2 (1.32 ± 0.18 MPa.m1/2) showed significantly higher fracture toughness values than HA (0.67 ± 0.09 MPa.m1/2). HA showed significantly higher characteristic stress (295.8 MPa) in comparison to groups with 5 % (235.1 MPa) and 8 % (214.4 MPa) TiO2 nanoparticles. Differences were not observed between the Weibull modulus values. The solubility results indicated that all experimental ceramics were above the 2000 ug/cm2 limit set by the ISO 6872:2015.

SIGNIFICANCE

This study proposed the development and characterization of a new ceramic for dental prosthesis made from HA extracted from bovine bones, with the intention of reusing these solids waste and transforming them into a sustainable and low-cost material. Although the experimental calcium phosphate ceramic with additions of 5 % and 8 % of TiO2 achieved desirable mechanical properties, the chemical solubility values were very high.

Direct Immobilization of Folic Acid Molecules on Hydroxyapatite Nanoparticles with Substitution and Coordination Phenomena

We successfully synthesized folic acid (FA) immobilized hydroxyapatite (HA) nanoparticles without using a mediative reagent (e.g., silane coupling agent), and the immobilization states were evaluated and discussed. The HA nanoparticles with higher biocompatibility have two different planes, namely, c- and m-planes. These plane surfaces are rich in phosphate groups (P-site) and Ca2+ ions (C-site), respectively. We suggested that during the synthesis of the HA nanoparticles, the P-site substitution and C-site coordination with the addition of organic molecules containing -COO- ions can occur. Thus, it is possible to simultaneously immobilize two molecules to one HA nanoparticle. In this study, we successfully synthesized FA-immobilized HA nanoparticles by P-site substitution and C-site coordination reactions, which were named as substitution type and coordination type. In the substitution type, when FA was reacted with HA during the nucleation stage, the PO43- ions of HA decreased as the FA ratio of coverage surface area increased, and the crystalline phase was changed significantly from the Ca deficient HA to the carbonated HA phase. Accordingly, it was indicated that FA was immobilized on HA by the P-site substitution. In the coordination type, since FA was reacted with HA after the completion of crystal growth, the crystalline phase was changed slightly as the FA ratio of coverage surface area increased, indicating that FA was immobilized on HA by the C-site coordination. From the above, we controlled the FA immobilization states on the HA nanoparticles by the P-site substitution and the C-site coordination through the FA addition timing in the synthesis. Since the -COO- ions in FA could be selectively substituted with the P-site in HA, it is possible to directly coordinate the foreign organic molecules to the Ca2+ ions in HA. Therefore, the immobilization technique of this study is expected to achieve two different drug molecules with diagnosis and therapy functions (i.e., theranostics) on one nanoparticle.

Synthesis of hydroxyapatite from eggshells via wet chemical precipitation: a review

In conjunction with the global trend towards sustainable industry, this review provides a summary of the research endeavors and efforts made in the field of exploiting eggshells in the production of hydroxyapatite (HA). HA is one of the most used biomaterials and has attracted considerable attention over the years towards biomedical applications. As the traditional production of HA from calcium and phosphorus chemical precursors synthetically has bottlenecks of being expensive, complex, time consuming, and results in a low biocompatible product, natural resources have become an attractive alternative option to synthesize HA, with trace elements providing a higher performance. Eggshell, with a growing production annually, is potentially a promising natural resource for HA production. Many studies have used different wet chemical precipitation routes to produce HA with properties comparable to synthetic HA. Thus, this review provides an overview of the various routes that can be used to synthesize HA from eggshells. In this review, the synthesis of HA from eggshells via wet chemical precipitation methods is specifically discussed in term of synthesis parameters and properties of the synthesized HA. This review should aid in choosing the most suitable route for HA production with the optimum parameters for obtaining the desired properties to meet the requirements of biomedical applications such as tissue engineering.

Hydroxyapatite synthesis and characterization from waste animal bones and natural sources for biomedical applications

Hydroxyapatites (HAps) synthesized from waste animal bones have recently gained attention due to their outstanding properties. This is because there is a need to fabricate scaffolds with desirable mechanical strength, ability to withstand high temperatures, and insoluble in solvents such as water, acetone, ethanol, and isopropyl alcohol. This study is an extensive summary of many articles on the routes of synthesis/preparation of HAp, and the optimum processing parameter, and the biomedical application areas, such as: drug administration, dental implants, bone tissue engineering, orthopedic implant coatings, and tissue regeneration/wound healing. A broad catalog of the synthesis methods (and combination methods), temperature/time, shape/size, and the calcium-to-phosphorous (Ca/P) value of diverse waste animal bone sources were reported. The alkaline hydrolysis method is proposed to be suitable for synthesizing HAp from natural sources due to the technique's ability to produce intrinsic HAp. The method is also preferred to the calcination method owing to the phase transformation that takes place at high temperatures during calcinations. However, calcinations aid in removing impurities and germs during heating at high temperatures. When compared to calcination technique, alkaline hydrolysis method results in crystalline HAp; the higher degree of crystallinity is disadvantageous to HAp bioactivity. In addition, the standardization and removal of impurities and contaminants, thorough biocompatibility to ensure clinical safety of the HAp to the human body, and improvement of the mechanical strength and toughness to match specific requirements for the various biomedical applications are the important areas for future studies.

In-depth knowledge of the low-temperature hydrothermal synthesis of nanocrystalline hydroxyapatite from waste green mussel shell (Perna Viridis)

ABSTRACTThis study presents the use of a low-temperature hydrothermal method for extracting calcium sources from green mussel shell (P. Viridis) wastes and converting them into synthetic nanosized hydroxyapatite (HA). In this study, raw mussel shells were washed, pulverised, and sieved to start producing a fine calcium carbonate-rich powder. XRD quantitative analysis confirmed that the powder contains 97.6 wt. % aragonite. This powder was then calcined for 5 h at 900 °C to remove water, salt, and mud, yielding a calcium-rich feedstock with major minerals of calcite (68.7 wt.%), portlandite (24.7 wt.%), and minor aragonite (6.5 wt.%). The calcined powders were dissolved in aqueous stock solutions of HNO3 and NH4OH before hydrothermally reacting with phosphoric acid [(NH4)2HPO4], yielding pure, nanoscale (16-18 nm) carbonated HA crystals, according to XRD, FT-IR, and SEM analyses. The use of a low-temperature hydrothermal method for a feedstock powder produced by the calcination of low-cost mussel shell wastes would be a valuable processing approach for the industry's development of large-scale hydroxyapatite nanoparticle production.

Enhancing Bone Implants: Magnesium-Doped Hydroxyapatite for Stronger, Bioactive, and Biocompatible Applications

Hydroxyapatite (HAp) with the chemical formula Ca10(PO4)6(OH)2 is an inorganic material that exhibits morphology and composition similar to those of human bone tissues, making it highly desirable for bone regeneration applications. As one of the most biocompatible materials currently in use, HAp has undergone numerous attempts to enhance its mechanical strength. This research focuses on investigating the influence of magnesium (Mg) incorporation on the structural and mechanical properties of synthesized magnesium-doped hydroxyapatite (MgHAp) samples. Apart from its biocompatibility, Mg possesses a density and elasticity comparable to those of human bone. Therefore, incorporating Mg into HAp can be pivotal for improving bone formation. Previous studies have not extensively explored the structural changes induced by Mg substitution in HAp, which motivated us to revisit this issue. Hydrothermal synthesis technique was used to synthesize MgHAp samples with varying molar concentrations (x = 0, 0.5, 1.0, and 1.5). Theoretical simulation of HAp and MgHAp for obtaining 3D structures has been done, and theoretical X-ray diffraction (XRD) data have been compared with the experimental XRD data. Rietveld analysis revealed the alteration and deviation of lattice parameters with an increase in the Mg content, which ultimately affect the structure as well the mechanical properties of prepared samples. The findings revealed an increase in compressive stress and fracture toughness as the Mg concentration in the composition increased. Furthermore, using a finite-element analysis technique and modeling of the mechanical testing data, the von Mises stress distribution and Young's modulus values were calculated, demonstrating the similarity of the prepared samples to human cortical bone. Biocompatibility assessments using NIH-3T3 fibroblast cells confirmed the biocompatible and bioactive nature of the synthesized samples. MgHAp exhibits great potential for biomedical applications in the dental, orthopedic, and tissue engineering research fields.

Synthesis of pure and doped nano-calcium phosphates using different conventional methods for biomedical applications: a review

The applications of calcium phosphates (hydroxyapatite, tetracalcium phosphate, tricalcium phosphate (alpha and beta), fluorapatite, di-calcium phosphate anhydrous, and amorphous calcium-phosphate) are increasing day by day. Calcium hydroxyapatite, commonly known as hydroxyapatite (HAp), represents a mineral form of calcium apatite. Owing to its close molecular resemblance to the mineral constituents of bones, teeth, and hard tissues, HAp is often employed in the biomedical domain. In addition, it is extensively employed in various sectors such as the remediation of water, air, and soil pollution. The key advantage of HAp lies in its potential to accommodate a wide variety of anionic and cationic substitutions. Nevertheless, HAp and tricalcium phosphate (TCP) syntheses typically involve the use of chemical precursors containing calcium and phosphorus sources and employ diverse techniques, such as solid-state, wet, and thermal methods or a combination of these processes. Researchers are increasingly favoring natural sources such as bio-waste (eggshells, oyster shells, animal bones, fish scales, etc.) as viable options for synthesizing HAp. Interestingly, the synthesis route significantly influences the morphology, size, and crystalline phase of calcium phosphates. In this review paper, we highlight both dry and wet methods, which include six commonly used synthesis methods (i.e. solid-state, mechano-chemical, wet-chemical precipitation, hydrolysis, sol-gel, and hydrothermal methods) coupled with the variation in source materials and their influence in modifying the structural morphology from a bulky state to nanoscale to explore the applications of multifunctional calcium phosphates in different formats.

Impact of mechanical engineering innovations in biomedical advancements

Abstract

The principal objective of the present paper is to meticulously review the family of biomaterials used in implants. A spectrum of applications of biomaterials in the perspective of prosthesis is also presented. This paper also emphasises on the review of the recent advancements in the field of biomedical implants with respect to mechanical engineering perspective. The latest technologies such as finite element modelling of prosthetic implants, additive manufacturing of implants and certain experimental methods adopted in the field of prosthesis are discussed. Moreover, various models were modelled using SOLIDWORKS® 2022 modelling software and analysed using ANSYS® 2021 R2 finite element analysing software and implant models were additive manufactured to make this review more interesting and for better understanding. Overall, the latest technology in the field of mechanical engineering that fuels its impact in life-saving biomedical engineering has been discussed briefly.

Graphical abstract

Synthesis of nano-hydroxyapatite using emulsion, pyrolysis, combustion, and sonochemical methods and biogenic sources: a review

Hydroxyapatite (HAp) is comparable to materials in bone because its chemical components are similar to those contained in animal bone, and thus, its bioactive and biocompatible properties are similar. There are applications for HAp and relevant calcium phosphate in the medical and industrial sectors, and due to the rising demand for HAp nanoparticles, considerable work has been performed to develop a variety of synthetic pathways that incorporate scientifically and practically novel aspects. Numerous studies have been conducted to examine how changes in reaction parameters will successfully influence crucial HAp features. HAp can also be synthesized from biogenic sources such as HAp-rich fish scales or animal bones as an alternative to chemical precursors. Various preparation techniques produce crystals with varying sizes, but it has been found that nano-sized HAp exhibits a greater number of bioactive properties as compared to micron-sized HAp. Rather than considering conventional methods, this review focuses on alternative approaches such as emulsion, pyrolysis, combustion, and sonochemical methods along with waste bio-sources (biogenic sources) to obtain HAp. We summarize the currently accessible information pertaining to each synthesis process, while also focusing on their benefits and drawbacks.

Enhanced Biodegradability in Soil of Chicken Feather by Steam Explosion for Potential Application in Agricultural Biodegradable Plastics

Feather waste is a major issue from an economic and environmental point of view. Even though there are already routes for the valorisation of feathers into fertilisers and feather meal, these are considered to have low added value. For more attractive applications, for example in agricultural biodegradable plastics, higher and faster degradability in soil is required. To face this challenge alternative approaches to accelerate biodegradation and disintegration processes are needed. In this context, steam explosion appears as an effective technology to modify the structure of feather and improve its soil degradability. In this work, chicken feathers were treated by steam explosion and the effect of treatment on their structure and physico-chemical and thermal properties were evaluated. Finally, the effect of the process conditions on the disintegration and biodegradation in soil of feathers was also investigated, finding an increased degradation in soil of steam explosion treated feathers. These results open up the possibilities of using feather waste as a component for environmentally friendly agricultural bioplastics that can be degraded in-situ in soil.

Latest Research of Doped Hydroxyapatite for Bone Tissue Engineering

Bone tissue engineering has attracted great interest in the last few years, as the frequency of tissue-damaging or degenerative diseases has increased exponentially. To obtain an ideal treatment solution, researchers have focused on the development of optimum biomaterials to be applied for the enhancement of bioactivity and the regeneration process, which are necessary to support the proper healing process of osseous tissues. In this regard, hydroxyapatite (HA) has been the most widely used material in the biomedical field due to its great biocompatibility and similarity with the native apatite from the human bone. However, HA still presents some deficiencies related to its mechanical properties, which are essential for HA to be applied in load-bearing applications. Bioactivity is another vital property of HA and is necessary to further improve regeneration and antibacterial activity. These drawbacks can be solved by doping the material with trace elements, adapting the properties of the material, and, finally, sustaining bone regeneration without the occurrence of implant failure. Considering these aspects, in this review, we have presented some general information about HA properties, synthesis methods, applications, and the necessity for the addition of doping ions into its structure. Also, we have presented their influence on the properties of HA, as well as the latest applications of doped materials in the biomedical field.

Phosphorus recovery from municipal sludge-derived hydrochar: Insights into leaching mechanisms and hydroxyapatite synthesis

Hydrothermal liquefaction has the potential to exploit resources from municipal sewage sludge. It converts most organics into a liquid biofuel (biocrude), concentrates P in the solid residue (hydrochar), and consequently enables its efficient recovery. This study thoroughly evaluated the effects of extraction conditions on P and metal release from hydrochar by nitric acid. Among assessed factors, acid normality (0.02-1 N), liquid-to-solid ratio (5-100 mL/g), and contact time (0-24 h) had positive effects while decreasing eluate pH (0.5-4) improved leaching efficiencies of P and metals. Notably, eluate pH played a dominant role in P leaching and pH < 1.5 was crucial for complete extraction. P and metal leaching from hydrochar have strong interactions and their leaching mechanism was identified as product layer diffusion using the shrinking core model. This suggests that the leaching efficiency is susceptible to agitation and particle size but not temperature. Using 10 mL/g of 0.6 N HNO3 for 2 h was considered the best extraction condition for efficient P leaching (nearly 100%) and minimization of cost and contaminants (heavy metals). Following extraction, adding Ca(OH)2 at a Ca:P molar ratio of 1.7-2 precipitated most P (99-100%) at pH 5-6, while a higher pH (13) synthesized hydroxyapatite. The recovered precipitates had high plant availability (61-100%) of P and satisfactory concentrations of heavy metals as fertilizers in Canada and the US. Overall, this study established reproducible procedures for P recovery from hydrochar and advanced one step closer to wastewater biorefinery.

An investigation on the fabrication and characterization of friction stir processed nano-HAp reinforced AZ91D magnesium matrix surface composite for bio-implants

In the present research, friction stir processed (FSPed) nano-hydroxyapatite reinforced AZ91D magnesium matrix surface composite has been developed with improved ultimate tensile strength (UTS) and biological performance, which are needed for the bio-implants. Nano-hydroxyapatite reinforcement with varying proportions (5.8%, 8.3%, and 12.5%) was introduced into the AZ91-D parent material (PM) by the grooving method with different grooves of 0.5, 1 & 1.5 mm of width and 2 mm depth machined on the surface of the PM. Taguchi's L-9 orthogonal array was employed to optimize the processing variables for enhancing the UTS of the developed composite material. The optimum parameters were discovered to be the tool rotational speed of 1000 rpm, transverse speed of 50 mm/min, and 12.5% reinforcement concentration. The results revealed that the tool rotational speed contributes the highest effect (43.69%) on UTS, followed by the reinforcement percentage (37.49%) and transverse speed (18.31%). The FSPed samples at the optimized parameter setting confirmed the enhancement of 30.17% and 31.86% in UTS and micro-hardness, respectively, compared to the PM. Cytotoxicity of the optimized sample was also found superior compared to the other FSPed samples. The optimized FSPed composite's grain size was 6.88 times smaller than the AZ91D parent matrix material. The improved mechanical and biological performances of the composites are attributed to the significant grain refinement and proper dispersion of the nHAp reinforcement in the matrix.

Piezoelectric Biocomposites for Bone Grafting in Dentistry

In this research, Hydroxyapatite-Potassium, Sodium Niobate-Chitosan (HA-KNN-CSL) biocomposites were synthesized, both as hydrogel and ultra-porous scaffolds, to offer two commonly used alternatives to biomaterials in dental clinical practice. The biocomposites were obtained by varying the content of low deacetylated chitosan as matrix phase, mesoporous hydroxyapatite nano-powder, and potassium-sodium niobate (K_0.47Na_0.53NbO₃) sub-micron-sized powder. The resulting materials were characterized from physical, morpho-structural, and in vitro biological points of view. The porous scaffolds were obtained by freeze-drying the composite hydrogels and had a specific surface area of 18.4-24 m²/g and a strong ability to retain fluid. Chitosan degradation was studied for 7 and 28 days of immersion in simulated body fluid without enzymatic presence. All synthesized compositions proved to be biocompatible in contact with osteoblast-like MG-63 cells and showed antibacterial effects. The best antibacterial effect was shown by the 10HA-90KNN-CSL hydrogel composition against Staphylococcus aureus and the fungal strain Candida albicans, while a weaker effect was observed for the dry scaffold.

Wood as Possible Renewable Material for Bone Implants-Literature Review

Bone fractures and bone defects affect millions of people every year. Metal implants for bone fracture fixation and autologous bone for defect reconstruction are used extensively in treatment of these pathologies. Simultaneously, alternative, sustainable, and biocompatible materials are being researched to improve existing practice. Wood as a biomaterial for bone repair has not been considered until the last 50 years. Even nowadays there is not much research on solid wood as a biomaterial in bone implants. A few species of wood have been investigated. Different techniques of wood preparation have been proposed. Simple pre-treatments such as boiling in water or preheating of ash, birch and juniper woods have been used initially. Later researchers have tried using carbonized wood and wood derived cellulose scaffold. Manufacturing implants from carbonized wood and cellulose requires more extensive wood processing-heat above 800 °C and chemicals to extract cellulose. Carbonized wood and cellulose scaffolds can be combined with other materials, such as silicon carbide, hydroxyapatite, and bioactive glass to improve biocompatibility and mechanical durability. Throughout the publications wood implants have provided good biocompatibility and osteoconductivity thanks to wood's porous structure.

Bioinorganic Preparation of Hydroxyapatite and Rare Earth Substituted Hydroxyapatite for Biomaterials Applications

Rare Earth elements in the lanthanide series are regarded as one of the finest options for the cationic substitution of calcium ions in hydroxyapatite (HA) because of their favorable impact on the biological characteristics of substituted HA. Neodymium and cerium were used to substitute 5% of calcium ions in HA, prepared via the wet precipitation method. Characterization tests for pure and substituted HA were conducted using XRD, FTIR, EDS, and FESEM. The results showed that changing part from calcium ions in hydroxyapatite to Nd and Ce ions altered its structure, composition, and morphology. Regarding the biological tests, the cytotoxicity test revealed a change in IC₅₀ for both normal and cancer cell lines, where substitution part of the Ca ions with rare Earth elements led to increasing antitumor activity in comparison with HA without substitution; in addition, antibacterial and fungicide activity was evident for both HA and Nd-Ce/HA, with a modest increase in antibacterial activity of Nd-Ce/HA against S. epidermidis and E. coli in comparison with HA. These findings may shed light on the process by which Nd and Ce ions improve the biological characteristics of pure HA and the increased potential of these bioceramics.

Short and long-term effects of nanobiomaterials in fish cell lines. Applicability of RTgill-W1

Nanobiomaterials (NBMs) are nanostructured materials for biomedical applications that can reach aquatic organisms. The short and long-term effects of these emerging contaminants are unknown in fish. The RTgill-W1 cell line has been proposed as a model to predict the acute toxicity of chemicals to fish (OECD Test Guideline nº 249). We assessed the applicability of this cell line to study the short and long-term toxicity of 15 NBMs based on hydroxyapatites (HA), lipid (LSNP/LNP), gold, iron oxide, carbon, poly l-Lactide acid (PLLA) fibers with Ag and poly (lactide-co-glycolide) acid. Two more rainbow trout cell lines (RTL-W1, from liver, and RTS-11, from spleen) were exposed, to identify possible sensitivity differences among cells. Exposures to a range of concentrations (0.78-100 μg/mL) lasted for 24 h. Additionally, the RTgill-W1 was used to perform long-term (28 d exposure) and recovery (14 d exposure/14 d recovery) assays. Cells were exposed to the 24 h-IC₂₀ and/or to 100 μg/mL. A triple cytotoxicity assay was conducted. After 24 h, only PLLA Fibers-Ag showed cytotoxicity (IC₅₀ < 100 μg/mL). However, the NBMs in general provoked concentration-dependent effects after long-term exposures, except the LSNPs. A recovery of viability was only observed for AuNPs, AuNRods, Fe₃O₄PEG-PLGA, MgHA-Collag_Scaffolds, Ti-HA and TiHA-Alg NPs.These results evidenced the need to test the long-term toxicity of NBMs and showed differences in cytotoxicity probably associated to different mechanisms of toxic action. The RTgill-W1 was useful to screen short and long-term toxicities of NBMs and appears as a promiseful model to assess possible toxicity of NBMs in fish.

Evaluation of the impact of pH of the reaction mixture, type of the stirring, and the reagents' concentration in the wet precipitation method on physicochemical properties of hydroxyapatite so as to enhance its biomedical application potential

Hydroxyapatite (HAp) constitutes a significant inorganic compound which due to its osteoinductivity, osteoconductivity as well as the ability to promote bone growth and regeneration is widely applied in development of biomaterials designed for bone tissue engineering. In this work, various synthesis methodologies of HAp based on the wet precipitation technique were applied, and the impact of pH of the reaction mixture, the concentration of individual reagents as well as the type of stirring applied (mechanical/magnetic) on the properties of final powders was discussed. Spectroscopic methods (Fourier transform infrared, Raman) and X-ray diffraction allowed to verify the synthesis parameters leading to obtaining calcium phosphate with 96% HAp in phase which indicated higher homogeneity of obtained powder (93.4%) than commercial HAp. Powders' morphology was evaluated using microscopic techniques while specific surface area was determined via Brunauer-Emmett-Teller analysis. Particle size distribution, porosity of powders, and stability of HAp suspensions were also characterized. It was proved that synthesis at pH = 11.0 using mechanical stirring resulted in calcium phosphate with a high phase homogeneity and homogeneous pore size distribution (6-20 nm). Moreover, obtained HAp powder showed 71.8% more specific surface area than commercial material-that is, 110 m³ /g for synthetic HAp and 64 m³ /g in the case of commercial powder-which, in turn, is significant in terms of its potential application as carrier of active substances. Thus it was demonstrated that by applying appropriate conditions of HAp synthesis it is possible to obtain powder with properties enhancing its application potential for medical purposes.

YD, Anil S, Senthilkumar K, Seong GH, Sargod SS, Bhat SS, Venkatesan J. Remineralizing Potential of Natural Nano-Hydroxyapatite Obtained from Epinephelus chlorostigma in Artificially Induced Early Enamel Lesion: An In Vitro Study

Dental caries is a common problem in adolescents, leading to permanent loss of teeth or cavitation. Caries is a continuous process wherein demineralization and remineralization occur regularly. Hydroxyapatite (HA) is one of the most biocompatible and bioactive materials, as it closely resembles the mineral composition of teeth. The present study deals with isolating hydroxyapatite from fish bone (Epinephelus chlorostigma) by alkaline hydrolysis and thermal calcination. The isolated nano HA was characterized using FT-IR, XRD, TGA, FE-SEM-EDX, and HR-TEM analysis. The nano HA isolated by alkaline hydrolysis is nontoxic, and the cells are viable. The isolated HA enhances the proliferation of L929 cells. The remineralization potential of the extracted nano HA was evaluated in healthy premolars by DIAGNOdent/laser fluorescence quantification, surface microhardness test, and SEM-EDX analysis. Surface morphological observations in SEM and EDX analyses show that thermally calcined HA and alkali-treated HA can induce mineralization and deposit minerals. Therefore, HA obtained from Epinephelus chlorostigma could be a potential biomaterial for treating early caries.

Ionic Liquid-Based Polymer Nanocomposites for Sensors, Energy, Biomedicine, and Environmental Applications: Roadmap to the Future

Current interest toward ionic liquids (ILs) stems from some of their novel characteristics, like low vapor pressure, thermal stability, and nonflammability, integrated through high ionic conductivity and broad range of electrochemical strength. Nowadays, ionic liquids represent a new category of chemical-based compounds for developing superior and multifunctional substances with potential in several fields. ILs can be used in solvents such as salt electrolyte and additional materials. By adding functional physiochemical characteristics, a variety of IL-based electrolytes can also be used for energy storage purposes. It is hoped that the present review will supply guidance for future research focused on IL-based polymer nanocomposites electrolytes for sensors, high performance, biomedicine, and environmental applications. Additionally, a comprehensive overview about the polymer-based composites' ILs components, including a classification of the types of polymer matrix available is provided in this review. More focus is placed upon ILs-based polymeric nanocomposites used in multiple applications such as electrochemical biosensors, energy-related materials, biomedicine, actuators, environmental, and the aviation and aerospace industries. At last, existing challenges and prospects in this field are discussed and concluding remarks are provided.

Hydroxyapatite/L-Lysine Composite Coating as Glassy Carbon Electrode Modifier for the Analysis and Detection of Nile Blue A

An amperometric sensor was developed by depositing a film coating of hydroxyapatite (HA)/L-lysine (Lys) composite material on a glassy carbon electrode (GCE). It was applied for the detection of Nile blue A (NBA). Hydroxyapatite was obtained from snail shells and its structural properties before and after its combination with Lys were characterized using X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) surface area analyses. The coupling of Lys to HA was attributed to favorable interaction between negatively charged -COO^- groups of Lys and divalent ions Ca²⁺ of HA. Electrochemical investigations pointed out the improvement in sensitivity of the GCE/Lys/HA sensor towards the detection of NBA in solution. The dependence of the peak current and potential on the pH, scan rate, and NBA concentration was also investigated. Under optimal conditions, the GCE/Lys/HA sensor showed a good reproducibility, selectivity, and a NBA low detection limit of 5.07 × 10^-8 mol L^-1. The developed HA/Lys-modified electrode was successfully applied for the detection of NBA in various water samples.

Light-Activated Hydroxyapatite Photocatalysts: New Environmentally-Friendly Materials to Mitigate Pollutants

This review focuses on a reasoned search for articles to treat contaminated water using hydroxyapatite (HAp)-based compounds. In addition, the fundamentals of heterogeneous photocatalysis were considered, combined with parameters that affect the pollutants’ degradation using hydroxyapatite-based photocatalyst design and strategies of this photocatalyst, and the challenges of and perspectives on the development of these materials. Many critical applications have been analyzed to degrade dyes, drugs, and pesticides using HAp-based photocatalysts. This systematic review highlights the recent state-of-the-art advances that enable new paths and good-quality preparations of HAp-derived photocatalysts for photocatalysis.

Influence of Fish Scale-Based Hydroxyapatite on Forcespun Polycaprolactone Fiber Scaffolds

Marine waste byproducts, especially fish scales, have proved to be one of the most prominent sources for developing sustainable materials for various applications including biomedical applications. Hydroxyapatite (HAp), being one of such biomaterials that can be synthesized from the massive fish-based waste, has received plentitude of attention due to its excellent ability to promote cell growth and proliferation. However, understanding the influence of HAp on polymer matrices that are tailored for biomedical applications is still a challenge. This study is intended to develop a sophisticated yet inexpensive method to obtain nonwoven polycaprolactone (PCL) nanofibrous scaffolds and analyze the influence of calcium-deficient nanoporous hydroxyapatite (n-HAp) on the thermal, mechanical, and biological properties of these scaffolds. The n-HAp is synthesized using two different types of fish scales, carpa (CA) and pink perch (PP), by calcination followed by nanomilling. The synthesized n-HAp powder is characterized by using X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy. The PCL fibrous scaffolds were developed using a novel forcespinning technique with n-HAp as the filler. The morphology of the scaffolds was characterized using SEM and Raman spectroscopy. SEM and TEM results have confirmed the size reduction of the HAp powder after nanomilling. Thermal properties were analyzed using thermogravimetric analysis and differential scanning calorimetry. The major degradation temperature has increased by 3° and was observed to be 398° for 1 wt % filler loading for both carpa and pink perch-derived n-HAp. The increase in filler content has increased the residue left after decomposition and is 4% for 5 wt % filler loading. The crystallinity percent has increased by 7% compared to neat fibers for 1 wt % filler loading. Mechanical properties were tested using tensile tests. The tensile test strength has shown 32% improvement for 1 wt % compared to neat fibers. Cell viability tests were performed using hFOB cells which have shown significant cell growth for a high filler loading of 5 wt %. The results suggest that both CA-n-HAP and PP-n-Hap-incorporated fibrous scaffolds can be used potentially for biomedical applications after careful investigation of the scaffold behavior with longer incubation periods.

Novel Trends into the Development of Natural Hydroxyapatite-Based Polymeric Composites for Bone Tissue Engineering

In recent years, the number of people needing bone replacements for the treatment of defects caused by chronic diseases or accidents has continuously increased. To solve these problems, tissue engineering has gained significant attention in the biomedical field, by focusing on the development of suitable materials that improve osseointegration and biologic activity. In this direction, the development of an ideal material that provides good osseointegration, increased antimicrobial activity and preserves good mechanical properties has been the main challenge. Currently, bone tissue engineering focuses on the development of materials with tailorable properties, by combining polymers and ceramics to meet the necessary complex requirements. This study presents the main polymers applied in tissue engineering, considering their advantages and drawbacks. Considering the potential disadvantages of polymers, improving the applicability of the material and the combination with a ceramic material is the optimum pathway to increase the mechanical stability and mineralization process. Thus, ceramic materials obtained from natural sources (e.g., hydroxyapatite) are preferred to improve bioactivity, due to their similarity to the native hydroxyapatite found in the composition of human bone.

Innovative Concepts and Recent Breakthrough for Engineered Graft and Constructs for Bone Regeneration: A Literature Systematic Review

BACKGROUND

For decades, regenerative medicine and dentistry have been improved with new therapies and innovative clinical protocols. The aim of the present investigation was to evaluate through a critical review the recent innovations in the field of bone regeneration with a focus on the healing potentials and clinical protocols of bone substitutes combined with engineered constructs, growth factors and photobiomodulation applications.

METHODS

A Boolean systematic search was conducted by PubMed/Medline, PubMed/Central, Web of Science and Google scholar databases according to the PRISMA guidelines.

RESULTS

After the initial screening, a total of 304 papers were considered eligible for the qualitative synthesis. The articles included were categorized according to the main topics: alloplastic bone substitutes, autologous teeth derived substitutes, xenografts, platelet-derived concentrates, laser therapy, microbiota and bone metabolism and mesenchymal cells construct.

CONCLUSIONS

The effectiveness of the present investigation showed that the use of biocompatible and bio-resorbable bone substitutes are related to the high-predictability of the bone regeneration protocols, while the oral microbiota and systemic health of the patient produce a clinical advantage for the long-term success of the regeneration procedures and implant-supported restorations. The use of growth factors is able to reduce the co-morbidity of the regenerative procedure ameliorating the post-operative healing phase. The LLLT is an adjuvant protocol to improve the soft and hard tissues response for bone regeneration treatment protocols.

Microwave Technology Using Low Energy Concentrated Beam for Processing of Solid Waste Materials from Rapana thomasiana Seashells

The solid waste of Rapana thomasiana seashells both from domestic activities and natural waste on seashore can be used to obtain viable products for medical applications. However, conventional technologies applied for sintering the materials require massive energy consumption due to the resistance heating. Microwave heating represents an advanced technology for sintering, but the stability of the process, in terms of thermal runaway and microwave plasma arc discharge, jeopardizes the quality of the sintered products. This paper aims to present the results of research focused on viable heating technology and the mechanical properties of the final products. A comparative analysis, in terms of energy efficiency vs. mechanical properties, has been performed for three different heating technologies: direct microwave heating, hybrid microwave heating and resistance heating. The results obtained concluded that the hybrid microwave heating led to final products from Rapana thomasiana solid waste with similar mechanical properties compared with resistance heating. In terms of energy efficiency, the hybrid microwave heating was 20 times better than resistance heating.

Nano-Hydroxyapatite vs. Xenografts: Synthesis, Characterization, and In Vitro Behavior

This research focused on the synthesis of apatite, starting from a natural biogenic calcium source (egg-shells) and its chemical and morpho-structural characterization in comparison with two commercial xenografts used as a bone substitute in dentistry. The synthesis route for the hydroxyapatite powder was the microwave-assisted hydrothermal technique, starting from annealed egg-shells as the precursor for lime and di-base ammonium phosphate as the phosphate precursor. The powders were characterized by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDAX), transmission electron microscopy (TEM), X-ray fluorescence spectroscopy (XRF), and cytotoxicity assay in contact with amniotic fluid stem cell (AFSC) cultures. Compositional and structural similarities or differences between the powder synthesized from egg-shells (HA1) and the two commercial xenograft powders-Bio-Oss®, totally deproteinized cortical bovine bone, and Gen-Os®, partially deproteinized porcine bone-were revealed. The HA1 specimen presented a single mineral phase as polycrystalline apatite with a high crystallinity (Xc 0.92), a crystallite size of 43.73 nm, preferential growth under the c axes (002) direction, where it mineralizes in bone, a nano-rod particle morphology, and average lengths up to 77.29 nm and diameters up to 21.74 nm. The surface of the HA1 nanoparticles and internal mesopores (mean size of 3.3 ± 1.6 nm), acquired from high-pressure hydrothermal maturation, along with the precursor's nature, could be responsible for the improved biocompatibility, biomolecule adhesion, and osteoconductive abilities in bone substitute applications. The cytotoxicity assay showed a better AFSC cell viability for HA1 powder than the commercial xenografts did, similar oxidative stress to the control sample, and improved results compared with Gen-Os. The presented preliminary biocompatibility results are promising for bone tissue regeneration applications of HA1, and the study will continue with further tests on osteoblast differentiation and mineralization.

Coupled effect of particle size of the source materials and calcination temperature on the direct synthesis of hydroxyapatite

We report the effect of controlled particle size (obtained by using 80, 100, 120, 140 and 200 mesh) of the source materials on the synthesis of a well-known biomaterial, hydroxyapatite (Hap). In addition to this, we have also mapped the consequence of applied temperature (700°C, 800°C and 900°C) on the crystallographic properties and phase composition of the obtained Hap. Nevertheless, although with Hap, in each case, β-tricalcium phosphate (β-TCP) was registered as the secondary phase the ANOVA test revealed that the results of the crystallographic parameters are significantly different for the applied sintering temperature 700°C and 800°C (p < 0.05), while the data obtained for calcination temperature 800°C are not significantly different from that acquired at 900°C (p > 0.05). Fourier transform infrared spectrophotometer data ensured that, irrespective of mesh size and calcination temperature, the synthesized Hap samples were of carbonated apatite with B-type substitution. Interestingly, for all cases, the % of carbonate content was below the maximum limit (8%) of theCO 3 2 - ion present in bone tissue hydroxyapatite.

Dental Applications of Systems Based on Hydroxyapatite Nanoparticles—An Evidence-Based Update

Hydroxyapatite is one of the most studied biomaterials in the medical and dental field, because of its biocompatibility; it is the main constituent of the mineral part of teeth and bones. In dental science, hydroxyapatite nanoparticles (HAnps) or nano-hydroxyapatite (nano-HA) have been studied, over the last decade, in terms of oral implantology and bone reconstruction, as well in restorative and preventive dentistry. Hydroxyapatite nanoparticles have significant remineralizing effects on initial enamel lesions, and they have also been used as an additive material in order to improve existing and widely used dental materials, mainly in preventive fields, but also in restorative and regenerative fields. This paper investigates the role of HAnps in dentistry, including recent advances in the field of its use, as well as their advantages of using it as a component in other dental materials, whether experimental or commercially available. Based on the literature, HAnps have outstanding physical, chemical, mechanical and biological properties that make them suitable for multiple interventions, in different domains of dental science. Further well-designed randomized controlled trials should be conducted in order to confirm all the achievements revealed by the in vitro or in vivo studies published until now.

Ablation of Bone Tissue by Femtosecond Laser: A Path to High-Resolution Bone Surgery

Femtosecond lasers allow for high-precision, high-quality ablation of biological tissues thanks to their capability of minimizing the thermal loads into the irradiated material. Nevertheless, reported ablation rates remain still too limited to enable their exploitation on a clinical level. This study demonstrates the possibility to upscale the process of fs laser ablation of bone tissue by employing industrially available fs laser sources. A comprehensive parametric study is presented in order to optimize the bone tissue ablation rate while maintaining the tissue health by avoiding excessive thermal loads. Three different absorption regimes are investigated by employing fs laser sources at 1030 nm, 515 nm and 343 nm. The main differences in the three different wavelength regimes are discussed by comparing the evolution of the ablation rate and the calcination degree of the laser ablated tissue. The maximum of the ablation rate is obtained in the visible regime of absorption where a maximum value of 0.66 mm³/s is obtained on a non-calcined tissue for the lowest laser repetition rate and the lowest spatial overlap between successive laser pulses. In this regime, the hemoglobin present in the fresh bone tissue is the main chromophore involved in the absorption process. To the best of our knowledge, this is the highest ablation rate obtained on porcine femur upon fs laser ablation.

Emerging marine derived nanohydroxyapatite and their composites for implant and biomedical applications

Implant materials must mimic natural human bones with biocompatibility, osteoconductivity and mechanical stability to successfully replace damaged or disease-affected bones. Synthetic hydroxyapatite was incorporated with bioglass to mimic natural bones for replacing conventional implant materials which has led to certain toxicity issues. Hence, hydroxyapatite (HAp) are recently gaining applicational importance as they are resembling the structure and function of natural bones. Further, nanosized HAp is under extensive research to utilize them as a potential replacement for traditional implants with several exclusive properties. However, chemical synthesis of nano-HAp exhibited toxicity towards normal and healthy cells. Recently, biogenic Hap synthesis from marine and animal sources are introduced as a next generation implant materials, due to their mineral ion and significant porous architecture mediated biocompatibility and bone bonding ability, compared to synthetic HAp. Thus, the purpose of the paper is to give a bird's eye view into the conventional approaches for fabricating nano-HAp, its limitations and the significance of using marine organisms and marine food wastes as a precursor for biogenic nano-Hap production. Moreover, in vivo and in vitro analyses of marine source derived nano-HAp and their potential biomedical applications were also discussed.

Environmental Reactions of Air-Quality Protection on Eco-Friendly Iron-Based Catalysts

A series of iron functionalized hydroxyapatite (Fe/HAP) samples with different metal loading (2 < wt.% Fe < 13) was prepared by a flash ionic exchange procedure from iron(III) nitrate as precursor and tested in some environmental air-quality protection reactions such as the catalytic reduction of NOx by NH3 (NH3-SCR), catalytic oxidation of NH3 (NH3-SCO) and catalytic N2O decomposition. The catalytic performances of the Fe/HAP catalysts were determined under flow conditions as a function of temperature and using reactant concentrations typical of polluting gaseous emissions from industrial vents. Physico-chemical characterization with various techniques of study (UV-DR and Mössbauer spectroscopies, NH3 titration, N2-physisorption, and XRPD analyses) provided valuable information on Fe-speciation, acidity, morphology, and structure of the samples. In general, highly dispersed Fe3+ centers were the predominant species, irrespective of Fe-loading, while just low percentage (≤15%) of FexOy nanoclusters (2 < size/nm < 4) was detected on the samples. As expected, the differences in iron concentration produced a diversified effect of both catalyst properties and catalytic activity, comprising the conversion and selectivity profiles, different for each reaction considered. The obtained results indicate a good potentiality for the eco-friendly Fe-catalysts for some environmental reactions of air protection.

Polymer-Based Composites: An Indispensable Material for Present and Future Applications

Right from the early days, polymer materials have been discovered as being beneficial for various applications but a poor understanding of these materials greatly handicapped their usage. However, with a change in this trend, polymer materials have gradually displaced other materials in most applications. In recent times, due to improved research and knowledge, polymer-based materials are the first choice materials for several applications and are now replacing other materials rapidly. More advanced materials from polymers are being developed daily as a substitute for other materials even in areas where polymers are considered not to be suitable in the time past. More recently, polymers have replaced metals and ceramics in applications like constructions, aerospace, automobiles, and medical. It is no doubt that this trend will continue due to the inherent properties of polymers and sustainability potential. Today, most of the limitations of polymers are being taken care of in the formulation of composite materials. Besides, the adaptation to positive environmental influence is being handled by scientists and researchers. Hence, this review reveals core areas of application of polymer-based composites and the significance of these materials to the advancement of humanity.