How climate change and eutrophication interact with microplastic pollution and sediment resuspension in shallow lakes: A review

Microplastics and the freshwater plankton: Effects on grazing and mortality

When studying the effects of microplastics (MP) on zooplankton in freshwater environments, there is a knowledge gap at the community level, as most studies use monocultures under laboratory conditions with limited comparability to field studies. The aim of our study was to investigate the uptake of MP at environmentally relevant concentrations by a natural zooplankton community feeding on native phytoplankton. Rotifers and cladocerans comprised more than 96 % of total zooplankton community, while nauplii and copepodites dominated the copepod community. To test the possible change in phytoplankton grazing and zooplankton mortality after MP exposure, zooplankton were exposed to three different polyethylene MP sizes: A (1-5 µm), B (27-32 µm), and C (45-53 µm) during 96 hours. Ingestion in group A was observed in 34 % of rotifers, 20 % of cladocerans and 67 % of copepods. In group B, only cladocerans ingested MP, and to a much lower extent (2 %), which could be due to the composition of the community. None of the zooplankton studied ingested MP particles in group C. The ingestion of MP decreased phytoplankton consumption, and phytoplankton abundance varied greatly between samples. The highest phytoplankton abundance was observed in the A samples with the highest proportion of ingested MP, indicating a significant reduction in grazing pressure that allowed phytoplankton to proliferate. This result, combined with the highest mortality of cladocerans in the A samples (12.7 ± 0.91 %), indicates the negative impact of MP on the normal functioning of the freshwater plankton food web.

Impacts of climatic stressors on dissolved organic matter leaching from microplastics and their effects on biogeochemical processes: A review

This review explores the potential impact of microplastic-derived dissolved organic matter (MP-DOM) on biogeochemical processes associated with global carbon and nitrogen cycles, with consideration given to the possible influence of irregular climate changes. We synthesize literature on MP-DOM leaching behaviors during various natural aging processes, such as heavy rainfall, heat waves, and UV irradiation, which may be intensified by climate change. MP-DOM release varies with plastic type and conditions, with organic additives significantly influencing leaching under UV exposure. Increased turbulence from hydrological events and rising temperatures also enhances MP-DOM release. While most research has focused on specific additive releases, the broader effects of polymer degradation and subsequent impacts on microbial communities and biogeochemical cycles are only recently recognized. These disruptions may affect cellular processes in algae and plant roots, enhance microbial utilization of dissolved organic carbon, and potentially increase greenhouse gas production. Our review highlights overlooked roles of MP-DOM exacerbated by climatic stressors and calls for further research to understand its broader biogeochemical impacts. We also emphasize the importance of distinguishing between polymers and commercial plastics when assessing MP-DOM's effects on biogeochemical processes associated with carbon and nitrogen cycles and recommend investigating additional aging processes influencing MP-DOM release.

Coupling effect of cyanobacterial blooms with migration and transformation of typical pollutants in lake or reservoir: Enhanced or decreased?

Eutrophication of lake and reservoir caused by cyanobacterial harmful algal blooms (cyanoHABs) become a global ecological problem because of massive destruction of ecosystems, which have attracted attentions widely. In addition to the production of cyanotoxins by certain bloom-forming species, there may also be direct or indirect interactions between cyanobacteria blooms and various pollutants in lakes or reservoirs. Based on bibliometrics, 19110 papers in Web of Science (WOS) and 2998 papers in the China National Knowledge Infrastructure (CNKI) on eutrophication and cyanobacterial blooms in lakes and reservoirs were analyzed, which showed that research on this topic has been ongoing for nearly 80 years with a gradual increase in its popularity. The research on the coupling process of cyanobacterial blooms with five typical pollutants, including microcystins (MCs), heavy metals, viruses, antibiotics and antibiotic resistance genes (ARGs), indicate that the coupling process between cyanobacteria blooms and certain pollutants is indeed generated through direct or indirect interactions by adsorption, changing the physical and chemical conditions of water environment, and changing the structure of microbial community. For instance, the production, toxicity would be likely enhanced by cyanobacteria blooms directly. And the microorganisms may play a significant role in the interaction between cyanobacteria blooms and ARGs. Generally, the risk of some typical pollutants would be likely enhanced or decreased directly or indirectly by these processes. It is recommended that further attention be paid to the interrelationships between the process of cyanobacterial bloom and typical pollutants' migration and transformation, to provide the scientific basis for the risk assessment and thus multi-objective synergistic control and management of nutrients and typical pollutants in eutrophic lakes or reservoirs.

Global inland water greenhouse gas (GHG) geographical patterns and escape mechanisms under different water level

Inland water ecosystems are unique, whereby water level changes can lead to variance in greenhouse gas (GHG) emissions. The GHG circulation intensity of inland waterbodies is high, so different water depths affect the temperature sensitivity of greenhouse gases, and have different cooling effects on CO2 storage and warming effects on CH4 emissions, being a typical GHG conversion channel. This study systematically reveals geographical GHG emission patterns from inland waterbodies and GHG impact mechanisms from regional waterbodies. Special emphasis is also paid to compounded environmental impact changes on GHG emissions under water level regulations. Additionally, we explore how increases in primary productivity can convert aquatic ecosystems from CO2 sources to CO2 sinks. However, GHG formation and emissions under ecological reservoir water level fluctuations in flood-ebb zones, intertidal tidal zones, wetlands, and lacustrine systems remain uncertain compared with those under natural hydrological conditions. Therefore, mechanisms that control GHG exchange and production processes under water level changes must first be determined, especially regarding post flood hydrological-based drying effects on GHG flux at the water-air interface. Finally, we recommend instituting environmental management and water-level control measures to reduce GHG emissions, which are favorable for minimizing GHG flux while protecting ecosystem functions and biodiversity.

Analysis of the anthropogenic effect on the Silencio River in Salvador Escalante, Michoacán, México

The average annual water availability worldwide is approximately 1,386 trillion cubic hectometers (hm3), of which 97.5% is saltwater and only 2.5% is freshwater. Nearly 70% is not available for human consumption as it is in glaciers, snow, and ice. It is estimated that only 0.77% is accessible freshwater for human use. Mexico has an availability of 451,584.7 million cubic meters (m3) of freshwater, with accessibility and distribution being unequal. The growth in urbanization, population, and industrialization has caused a decrease in water quality, and other parameters. Organic and inorganic contaminants evolved from various sources cause the degradation of water quality. The pollution of aquatic bodies, such as rivers and lakes, is one of the main problems in the world. In Salvador Escalante in México, the domestic wastewaters treatment plant (WWTP) is being exposed to effluents contaminated with metals like copper, cadmium, lead, and mercury. In this work, active sludges from the WWTP were analyzed. First, particle size distribution of flocs was measured by a sedimentation process. Secondly, analysis of the tolerance that microorganisms exhibit to metals (i.e., factors) was performed, based on a 2ˆ (4-1) factorial design of experiments at laboratory-scale, measuring pH, chemical oxygen demand (COD) and electrical conductivity (responses). This aims to evaluate the capacity of the WWTP for improve the water quality. Microbiologic cultures were used for a qualitative study of the microorganisms contained in the active sludges; it was found that Enterobacterium does not grow in presence of heavy metals. Cadmium is the most harmful metal for microorganisms according to Pareto diagrams presented in this study.

Pollution status of microplastics in the sediments of warm monomictic Dal lake, India: Abundance, composition, and risk assessment

This report presents the first investigation of microplastic (MP) contamination in the shoreline sediments of Dal Lake, Jammu and Kashmir, India. The MP concentrations ranged from 503 to 3154 MP/kg, with a notable seasonal variation. The highest concentrations of microplastics occurred in the Spring, ranging from 467 to 3445 MP/kg. Microplastics were identified using optical microscopy, Fourier Transform Infrared spectroscopy, and thermogravimetric analysis. Polymer analysis revealed that the Gagribal basin was contaminated with polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC), polyamide (PA), and polyethylene terephthalate (PET). In contrast, the Nigeen basin mainly comprises PE, PP, and PS. The significantly elevated Polymer Hazard Index (PHI) values, exceeding 1000 in the Gagribal basin, were attributed to the presence of PVC. Sediment quality was assessed using Pollution Load Index (PLI), Potential Ecological Risk Index (PERI), and PHI. Health risk metrics, such as estimated daily intake (EDI) and microplastic carcinogenic risks (MPCR), were also evaluated. There is a positive correlation between microplastic abundance and total organic carbon (TOC), total phosphorus (TP), and total nitrogen (TN). The Nigeen basin, characterized by a higher proportion of less hazardous polymers like PP, exhibited greater TOC levels due to enhanced microbial degradation of microplastics. Conversely, the Gagribal basin, with its higher presence of toxic polymers like PVC, had lower TOC levels, likely due to these compounds' inhibition of microbial activity. This study provides crucial insight into the spatial distribution and ecological impact of MPs in Dal Lake, setting the stage for future research on their effects on aquatic ecosystems.

Complex microplastics significantly influence the assembly process of lake bacterial communities

Environmental microplastics (MPs) vary in abundance, shape, size, color, and polymer type in freshwater ecosystems, yet their impact on bacterial community assembly in natural lakes is unclear. Here, we examined MPs and bacterial compositions in water and sediments of Taihu Lake, China, to reveal the influence of complex MPs on the bacterial community assembly. The results showed that the complexity index of MPs significantly influenced the turnover and nestedness components of bacterial communities. In the colder season, MP complexity was significantly correlated with the turnover componentin sediments (R2 = 0.19, P < 0.0001), with turnover increasing as MP complexity increased. Conversely, under warmer season, MP complexity was significantly correlated with turnover and nestedness components. Additionally, the interaction effect of environmental and MP factors affected almost all components of beta diversity, particularly in cold water and sediment, with impacts on nestedness of 0.17 and 0.12, respectively, and should thus not be ignored. Our findings indicate for the first time that complex MPs significantly influence the assembly of bacterial communities in lake systems. The impact varies across seasons and future warming may exacerbate this effect, rendering it more uncertain and complex.

Determination of Seasonal Microplastic pollutıon Variation in Aquatic Environments: Case Study from İskenderun Technical University Pond

Although microplastic (MP) pollution in aquatic ecosystems has been a critical issue, a significant portion of previous studies has been limited to marine environments. Few studies have evaluated MP abundance in inland waters, and those that exist often ignore seasonal variations. This study aimed to assess the seasonal variations in microplastic (MP) abundance in the İskenderun Technical University (İSTE) Pond. MP abundance ranged from 0.5 MPs/L to 10.8 MPs/L, with a mean of 3.7 MPs/L. Fiber-shaped, black-colored, small-sized (< 1000 μm) MPs were commonly found on the surface water. Statistical analysis confirmed significant variations in MP abundance across seasons. The abundance of MPs in the surface water correlated with the mean annual precipitation. Atmospheric deposition and storm water runoff were major contributors to microplastic pollution in the pond. PP and PET particles were identified. The findings of this study contains preliminary results that can be used in the development of future legislations and regulations.

A systematic review on aquaculture wastewater: Pollutants, impacts, and treatment technology

Aquaculture is the major way to solve the global food sacrcity. As the global population increases, the demand for aquaculture increases. Fish feed, drugs and chemicals, and metabolic waste or mortalities of aquatic organisms also increase, eventually resulting in the production of a large amount of aquaculture wastewater. These aquaculture discharges contain a variety of pollutants, such as conventional pollutants, organic compounds, heavy metals, and biological contaminants, inducing occupational hazards and risks, food security, the environment pollution. Proper wastewater treatment technologies are required to remove hazardous pollutants for minimizing their impacts on environmental and human health. Recirculating aquaculture systems, some biological and physicochemical methods have been applied to remove some pollutants from the aquaculture wastewater, but their efficiency in removing pollutants still requires to be further improved for achieving zero-waste discharge and ensuring sustainable aquaculture development. Meanwhile, sound regulation and legislation needs to be established for ensuring the normal operation of aquaculture industries and the standard discharge of wastewater. This review aims to provide comprehensive information of aquaculture wastewater for the researchers and promote the healthy development of aquaculture.

Nationwide occurrence and prioritization of tire additives and their transformation products in lake sediments of China

As a group of emerging contaminants of global concern, tire additives and their transformation products (TATPs) are causing a severe threat to aquatic ecosystems, particularly the highly lethal effects of N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine quinone (6PPD-Q) on certain fish species. Yet, the contamination status of TATPs in the lake ecosystems remains largely uncharacterized. This study conducted the first nationwide monitoring of the distribution characteristics of TATPs in 208 lake sediments collected from five lake regions across China. All the 13 TATPs were identified in lake sediments, with the total levels varying between 1.4 and 1355 ng/g, and 4-hydroxydiphenylamine (4-OH-PPD) as the most dominant. The total levels of TATPs decreased in the following order: Yunnan-Guizhou Plateau > Inner Mongolia-Xinjiang Region, Eastern Plain > Qinghai-Tibet Plateau, and Northeast Plain (p < 0.05). The geographical distribution of TATPs in lake sediments was significantly driven by total organic carbon content, temperature, and population density. N,N'-di-2-naphthyl-p-phenylenediamine, 6PPD-Q, N,N'-diphenyl-p-phenylenediamine, and 4-OH-PPD belonged to high-priority contaminants. Our study emphasizes that emerging pollutant TATPs place significant pressure on lake ecosystems and deserve urgent attention.

Microplastics-biofilm in aquatic ecosystem: Formation, pollutants complexation, greenhouse gas emission and ecotoxicology

The omnipresent microplastics (MPs) have gradually become a significant environmental problem due to its adverse consequences for ecological systems. MPs serve as substrates for biofilms colonization, which enhances adsorption of harmful contaminants on MPs surface in the aquatic ecosystem. The present study provides a critical discussion on the mechanism involved in MPs-biofilm formation, microbial colonization and the robust factors influencing the process in the aquatic ecosystem. Subsequently, the impact of MPs-biofilm on adsorption of inorganic and organic contaminants is explored. The ecological significance of MPs-biofilm associated pollutant complex for promoting greenhouse gases (GHGs) emissions from aquatic ecosystem is extensively discussed for understanding the climatic risk. Furthermore, the discussion is extended over ecotoxicological impact of MPs-biofilm on aquatic biodiversity and humans. The protective extracellular polymeric substances secreted by colonised bacteria over MPs during biofilm formation creates sticky MPs surface for heteroaggregates formation with swift adsorption of chemical compounds and microorganisms. MPs with functional aromatic groups facilitate the bacterial adhesion on the surface, but affect formation of biofilm. Alternatively, MPs-biofilm promotes the Mn and Fe hydrous oxides formation that can co-precipitate with heavy metal ions and facilitate in remediation measures. However, MPs biodegradation generates GHGs emission per unit mass, comparably more from freshwater than marine ecosystem. Considering the toxicity, MPs-biofilm induces the oxidative response in fishes, causing painful death and thus, destroys aquatic biodiversity. This study will be useful to address MPs-biofilm associated pollution scenario via trace, test and treat strategy involving future engineering research framework for ecological restoration.

The impact of microplastics on lake communities: A mesocosm study

Plastics are pervasive pollutants that are being produced at an increasing rate to meet consumer demands. After entering the environment, plastics can break down, creating smaller fragments, including secondary microplastics. Microplastic contamination in lakes has been recorded worldwide, and the ingestion of microplastics has been documented in zooplankton, macroinvertebrates, and fish. Microplastic ingestion and exposure can cause varying deleterious effects on these organism groups, but the impact of realistic microplastic concentrations on whole freshwater food webs requires further study. We addressed these knowledge gaps by conducting an 8-week experiment factorially crossing microplastic addition at a concentration of 1.5 particles/L with a fish predator (perch, Perca fluviatilis) presence in 1200-L outdoor mesocosms. Microplastic exposure had time-varying effects on zooplankton abundance, with a lower abundance of zooplankton in plastic treatments at the end of the experiment. Although microplastics had no impact on total macroinvertebrate abundance, there were effects on individual taxa. In the presence of microplastics, the cased caddisfly Triplectides spp. had a significantly lower abundance, which may have led to an increase in the snail Gyraulus spp. in week eight. Across the benthic and pelagic invertebrate communities, there were near-significant compositional differences between control and plastic treatments. These findings indicate that microplastic exposure may negatively impact freshwater invertebrate communities, even at low, field-realistic concentrations representative of the densities currently found in lakes.

Microplastics and climate change: the global impacts of a tiny driver

Microplastic pollution and climate change, the two seemingly distinct phenomena of global concern, are interconnected through various pathways. The connecting links between the two include the biological carbon pumps in the oceans, the sea ice, the plastisphere involved in biogeochemical cycling and the direct emissions of greenhouse gases from microplastics. On one hand, the presence of microplastics in the water column disrupts the balance of the natural carbon sequestration by affecting the key players in the pumping of carbon, such as the phytoplankton and zooplankton. On the other hand, the effect of microplastics on the sea ice in Polar Regions is two-way, as the ice caps are transformed into sinks and sources of microplastics and at the same time, the microplastics can enhance the melting of ice by reducing the albedo. Microplastics may have more potential than larger plastic fragments to release greenhouse gases (GHGs). Microbe-mediated emission of GHGs from soils is also now altered by the microplastics present in the soil. Plastisphere, the emerging microbiome in aquatic environments, can also contribute to climate change as it hosts complex networks of microbes, many of which are involved in greenhouse gas production. To combat a global stressor like climate change, it needs to be addressed with a holistic approach and this begins with tracing the various stressors like microplastic pollution that can aggravate the impacts of climate change.

A review of the influence mechanisms of climate-induced events on groundwater microplastic contamination: A focus on aquifer vulnerabilities and mitigation strategies

Climate change and plastic pollution are two main issues that our world is currently facing, and they are mainly linked through various processes, mechanisms, and chemical blueprint. Emerging issues related to microplastic (MP) contamination in freshwater are expanding and diverse research is being carried out globally. Factors causing climate change are increasing the frequency of extreme weather phenomena such as floods, drought, sea level rise, and heat waves, which can directly or indirectly influence the plastic/MP contamination in various ecosystems including groundwater environments. Here, we review the impacts of extreme weather events on MP contamination in freshwater with a specific focus on groundwater environments. This narrative review shows that flooding can have the most adverse effect on the MP pollution in groundwater environments through recharge events. Drought can also have major effects on MP pollution. Karst, alluvial, and coastal aquifers exhibit the highest levels of MP contamination among various aquifer types. Climate change's impact on different types of aquifers can vary depending on hydrogeological conditions and other factors in the groundwater environment. Prevention and comprehensive solutions are crucial for addressing MPs in the environment, with downstream measures being supplementary to upstream ones.

Applications of mathematical modelling for assessing microplastic transport and fate in water environments: a comparative review

Microplastics in the environment are considered complex pollutants as they are chemical and corrosive-resistant, non-biodegradable and ubiquitous. These microplastics may act as vectors for the dissemination of other pollutants and the transmission of microorganisms into the water environment. The currently available literature reviews focus on analysing the occurrence, environmental effects and methods of microplastic detection, however lacking a wide-scale systematic review and classification of the mathematical microplastic modelling applications. Thus, the current review provides a global overview of the modelling methodologies used for microplastic transport and fate in water environments. This review consolidates, classifies and analyses the methods, model inputs and results of 61 microplastic modelling studies in the last decade (2012-2022). It thoroughly discusses their strengths, weaknesses and common gaps in their modelling framework. Five main modelling types were classified as follows: hydrodynamic, process-based, statistical, mass-balance and machine learning models. Further, categorisations based on the water environments, location and published year of these applications were also adopted. It is concluded that addressed modelling types resulted in relatively reliable outcomes, yet each modelling framework has its strengths and weaknesses. However, common issues were found such as inputs being unrealistically assumed, especially biological processes, and the lack of sufficient field data for model calibration and validation. For future research, it is recommended to incorporate macroplastics' degradation rates, particles of different shapes and sizes and vertical mixing due to biofouling and turbulent conditions and also more experimental data to obtain precise model inputs and standardised sampling methods for surface and column waters.

Dewatering and valorizing lake sediments by electroosmotic dewatering for lakes restoration

Dredging eutrophic lake sediments can improve water quality, but it also requires dewatering and valorizing the dredged material to avoid wasting resources like phosphorus. This study experimentally investigated the basic mechanism and performance of electroosmotic dewatering of 1-L dredged sediments using different electric currents (20 mA, 40 mA, and 60 mA) after gravity filtration. The dewatering performance, moisture content and distribution, effect of electrochemical reaction on dewaterability, energy consumption, and changes in metals and phosphorus (P) distribution and pH values were analyzed. The results indicated that electroosmotic dewatering effectively decreased sediment mass by predominantly eliminating free and a portion of interstitial water, with reductions ranging from 7 to 20%. The optimal duration and current should, however, be considered to balance water removal and energy consumption. Higher moisture removal occurred with 40 mA for 24 h and 60 mA for 6 h, while the energy consumption obtained with 60 mA (0.201 kWh/kg water removed) was significantly lower than that of applying 40 mA for 24 h (0.473 kWh/kg water removed), with the assistance of ohmic heating, resulting in reduced viscosity and water release from capillaries. The tested conditions did not significantly extract heavy metals or P from the sediments, which may facilitate the disposal of the removed water back into the lake and the utilization of the treated sediments for different purposes. This technology is easy to operate and suitable for the treatment of dredged sediments, and the dewatering result is comparable to low pressurized filtration but at low energy consumption.

Effects of micro-nano plastics on the environmental biogeochemical cycle of nitrogen: A comprehensive review

Micro-nano plastics (MNPs; size <5 mm), ubiquitous and emerging pollutants, accumulated in the natural environment through various sources, and are likely to interact with nutrients, thereby influencing their biogeochemical cycle. Increasing scientific evidences reveal that MNPs can affect nitrogen (N) cycle processes by affecting biotopes and organisms in the environmental matrix and MNPs biofilms, thus plays a crucial role in nitrous oxide (N2O) and ammonia (NH3) emission. Yet, the mechanism and key processes behind this have not been systematically reviewed in natural environments. In this review, we systematically summarize the effects of MNPs on N transformation in terrestrial, aquatic, and atmospheric ecosystems. The effects of MNPs properties on N content, composition, and function of the microbial community, enzyme activity, gene abundance and plant N uptake in different environmental conditions has been briefly discussed. The review highlights the significant potential of MNPs to alter the properties of the environmental matrix, microbes and plant or animal physiology, resulting in changes in N uptake and metabolic efficiency in plants, thereby inhibiting organic nitrogen (ON) formation and reducing N bioavailability, or altering NH3 emissions from animal sources. The faster the decomposition of plastics, the more intense the perturbation of MNPs to organisms in the natural ecosystem. Findings of this provide a more comprehensive analysis and research directions to the environmentalists, policy makers, water resources planners & managers, biologists, and biotechnologists to do integrate approaches to reach the practical engineering solutions which will further diminish the long-term ecological and climatic risks.

Microplastic pollution responses to spatial and seasonal variations and water level management in a polymictic tropical reservoir (São Paulo, Brazil)

We assessed microplastic (μP) pollution in water and sediment samples during the dry and rainy season (October/2018 and March/2019, respectively) from the Guarapiranga Reservoir in the Metropolitan Region of São Paulo, Brazil, which provides drinking water for up to 5.2 million people. The concentration of mPs varied spatially and seasonally, with the higher concentrations observed near the urbanized areas and during the dry season. Water column concentrations ranged from 150 to 3100 particles/m3 and 0.07-25.05 mm3 plastic/m3 water during the dry season, and 70-7900 particles/m3 and 0.06-4.57 mm3 plastic/m3 water during the rainy season. Sediment samples were collected only during the rainy season, with concentrations ranging from 210 to 22,999 particles/kg dry weight and 0.15-111.46 mm3/kg dry weight. The particle size distribution exhibited seasonal variation, with μPs >1 mm predominating during the dry season, constituting 60-75% of all particles. In terms of quantity, fibers accounted for the majority of microplastics, comprising 55-95% during the dry season and 70-92% during the rainy season. However, when considering particle volume, irregular particles dominated in some samples, accounting for up to 95% of the total amount. The predominant colors of microplastics were white/crystal, black, and blue, with the main compositions identified as polypropylene (PP) and polyethylene terephthalate (PET), suggesting the influence of untreated domestic sewage discharge. Additionally, some additives were detected, including the pigments Fast RED ITR and phthalocyanine blue. The management of reservoir water levels appears to influence the quantity of μPs in the water column. As the water level increases up to 90% of the reservoir capacity during the rainy season, the amount of μPs in the water decreases, despite the higher influx of particles resulting from surface runoff caused by rainy conditions. This suggests a "dilution" effect combined to the polymictic mixing hydrodynamics. Our results may contribute to the creation and improvement of monitoring programs regarding mP pollution and to the adoption of specific public policies, which are still lacking in legislation.

Recent advances in the relationships between biofilms and microplastics in natural environments

Plastic pollution in the form of microplastics (MPs), poses a significant threat to natural ecosystems, with detrimental ecological, social, and economic impacts. This review paper aims to provide an overview of the existing research on the interaction between microbial biofilms and MPs in natural environments. The review begins by outlining the sources and types of MPs, emphasizing their widespread presence in marine, freshwater, and terrestrial ecosystems. It then discusses the formation and characteristics of microbial biofilms on MPs surfaces, highlighting their role in altering the physicochemical properties of MPs and facilitating processes such as vertical transport, biodegradation, dispersion of microorganisms, and gene transfer. Different methods used to assess these interactions are discussed, including microbiological and physicochemical characterization. Current gaps and challenges in understanding the complex relationships between biofilms and MPs are identified, highlighting the need for further research to elucidate the mechanisms underlying these complex interactions and to develop effective mitigation strategies. Innovative solutions, including bioremediation techniques and their combination with other strategies, such as nanotechnology, advanced filtration technologies, and public awareness campaigns, are proposed as promising approaches to address the issue of MPs pollution. Overall, this review underscores the urgent need for a multidisciplinary approach to combating MPs pollution, combining scientific research, technological innovation, and public engagement to safeguard the health and integrity of natural ecosystems.

Impacts of microplastic contamination on the rheology properties of sediments in a eutrophic shallow lake

Microplastic (MP) contamination is a growing global concern, with lake sediments serving as a significant sink for MP due to both anthropogenic and natural activities. Given the increasing evidence of MP accumulation in sediments, it was crucial to assess their influence on sediment erosion resistance, which directly affected sediment resuspension. To fill this gap, this study focused on the effect of MP on the sediments rheological properties. After 60-day experiments, it was found that MP addition into sediments reduced sediment viscosity, yield stress, and flow point shear stress. Meanwhile, MPs also significantly altered sediment properties and extracellular polymer composition. MP addition reduced extracellular polymeric substances production and cation exchange capacity, which then worked together and led to a weak sediment structure. Seemingly, MPs changed fluid sediment characteristics and caused stronger fluidity under less shear force. Consequently, the accumulation of MP might facilitate the resuspension of sediments under smaller wind and wave disturbances. This study provided novel insights into the direct impact of MPs on sediment physical properties using rheology, thereby enhancing our understanding of the environmental behavior of MPs in lake ecosystems.

Predictive modeling of nitrogen and phosphorus concentrations in rivers using a machine learning framework: A case study in an urban-rural transitional area in Wenzhou China

Rapid urbanization in China since 1980 generated environmental pressures of non-point source pollution (NPSP) and increased wide public concerns. Excessive quantities of nitrogen (N) and phosphorus (P) is a significant source of aquatic pollution, despite of their roles as essential nutritional elements for aquatic life processes. In this study, we present a new framework using random forest (RF) as a powerful machine learning algorithm driven by geo-datasets to estimate and map the concentration of total nitrogen (TN) and phosphorus (TP) at a spatial resolution for the Wen-Rui Tang River (WRTR) watershed, which is a typically urban-rural transitional area in east coastal region of China. A comprehensive GIS database of 26 in-house built environmental variables was adopted to build the predictive models of TN and TP in open waters over the watershed. The performances of the RF regression models were evaluated in comparison with in-situ measurements, and the results indicated the ability of RF regression models to accurately predict the spatiotemporal distribution of N and P concentration in rivers. Charactering the explanatory variable importance measures in the calibrated RF regression model defined the most significant variables impacting N and P contaminations in open waters across the urban-rural transitional area, and the results showed that these variables are aquaculture, direct domestic sewage, industrial wastewater discharges and the changing meteorological variables. Besides, mapping of the TN and TP concentrations across the continuous river at high spatiotemporal resolution (daily, 1 km × 1 km) in this study were informative. The results in this study provided the valuable data to various different stakeholders for managing water quality and pollution control where similar regions with rapid urbanization and a lack of water quality monitoring datasets.

Effect of bioturbation of the mitten crab on distribution of tire wear particles and their combined effect on sediment ecosystem

Tire wear particles (TWPs) are a major source of environmental microplastic pollution which gradually settle and accumulate in sediments after entering the aquatic environment, which can affect the behaviors of benthic organisms. Bioturbation of benthic species could affect the fate, impacts and potential risks of TWPs by altering the properties and structure of sediments. Therefore, in this study, the effect of TWPs on the burrowing activity of Chinese mitten crab (Eriocheir sinensis) was investigated. In addition, the effects of crab bioturbation on the distribution of TWPs and their additives were studied. The combined effects of TWPs and crab bioturbation on the microbial communities in the sediments were also explored. The results of this study showed that both TWPs and the leachate significantly inhibited the burrowing activity of crabs. TWPs in the surface layer of sediments were re-distributed by crab bioturbation and enriched mainly in the sediments near the burrow walls. Meanwhile, the heavy metals (i.e., Zn, Ca, Mg, Ba and Al) used as additives during the tire production in the burrow walls significantly increased as the accumulation of TWPs near burrow walls. In this study, TWP exposure decreased the bacterial diversity and abundance, as well as the functional genes related to carbon and nitrogen cycling process, but crab bioturbation increased them in the sediments of burrow walls by constructing a unique habitat. However, after TWPs entering into burrows, they were significantly decreased in the sediments near the burrow walls like the effects of TWPs, suggesting the negative effects of TWPs could play a dominant role in this combined system. Overall, this study is important for evaluating the distribution and effects of TWP pollution in the sediment ecosystem under biological factors such as bioturbation.

Emergence of nanoplastics in the aquatic environment and possible impacts on aquatic organisms

Plastic production on a global scale is instrumental in advancing modern society. However, plastic can be broken down by mechanical and chemical forces of humans and nature, and knowledge of the fate and effects of plastic, especially nanoplastics, in the aquatic environment remains poor. We provide an overview of current knowledge on the environmental occurrence and toxicity of nanoplastics, and suggestions for future research. There are nanoplastics present in seas, rivers, and nature reserves from Asia, Europe, Antarctica, and the Arctic Ocean at levels of 0.3-488 microgram per liter. Once in the aquatic environment, nanoplastics accumulate in plankton, nekton, benthos through ingestion and adherence, with multiple toxic results including inhibited growth, reproductive abnormalities, oxidative stress, and immune system dysfunction. Further investigations should focus on chemical analysis methods for nanoplastics, effect and mechanism of nanoplastics at environmental relevant concentrations in aquatic organisms, as well as the mechanism of the Trojan horse effect of nanoplastics.

The effects of nutrient loading from different sources on eutrophication in a large shallow lake in Southeast China

Lake water eutrophication has become one of the leading obstacles to sustainable economic development in China. Research on the effects of mainstream currents on reservoirs has been relatively underdeveloped compared with research on tributaries, though changes in the water-sediment transport regime in a downstream river may affect nutrient transport behavior in a lake connected to that river. This is particularly problematic because certain wastewater sources, including runoff from agricultural wastes and industrial discharges, adversely affect lake water. Our study focused on Sanshiliujiao Lake, a significant drinking water source in Fujian, Southeast China, that has suffered considerably from eutrophication over the past few decades. This study aimed to estimate the phosphorus and nitrogen loads to the lake, exploring their sources and their ecologic effects using in situ observation and the export coefficient model. Our results showed that the pollution loads of total phosphorus (TP) and total nitrogen (TN) were 2.390 and 46.040 t/year, respectively, most of which were derived from the water diversion (TP 45.7%, TN 29.2%) and non-point source (TP 30.2%, TN 41.6%). The TN input was the highest in East river (3.557 kg/d), followed by Red river (2.524 kg/d). During the wet season, the input of TP and TN increased by 14.6 and 18.7 times, respectively, but produced only slight variations in concentration. Water diversion enriched the nutrients inputs and altered the structure and abundance of phytoplankton communities. In addition, when water flows from the main river directly to Sanshiliujiao Lake, algal blooms in river-connected lakes are significantly exacerbated, so our study may also serve as a theoretical basis to regulate eutrophication in Sanshiliujiao Lake.

Effects of weathering on the properties and fate of secondary microplastics from a polystyrene single-use cup

In this work, we probed the changes to some physicochemical properties of polystyrene microplastics generated from a disposable cup as a result of UV-weathering, using a range of spectroscopy, microscopy, and profilometry techniques. Thereafter, we aimed to understand how these physicochemical changes affect the microplastic transport potential and contaminant sorption ability in model freshwaters. Exposure to UV led to measured changes in microplastic hydrophobicity (20-23 % decrease), density (3% increase), carbonyl index (up to 746 % increase), and microscale roughness (24-86 % increase). The settling velocity of the microplastics increased by 53 % after weathering which suggests that UV aging can increase microplastic deposition to sediments. This impact of aging was greater than the effect of the water temperature. Weathered microplastics exhibited reduced sorption capacity (up to 52 % decrease) to a model hydrophobic contaminant (triclosan) compared to unaged ones. The adsorption of triclosan to both microplastics was slightly reversible with notable desorption hysteresis. These combined effects of weathering could potentially increase the transport potential while decreasing the contaminant transport abilities of microplastics. This work provides new insights on the sorption capacity and mobility of a secondary microplastic, advances our knowledge about their risks in aquatic environments, and the need to use environmentally relevant microplastics.

Synergistic adverse effects of microfibers and freshwater acidification on host-microbiota interactions in the water flea Daphnia magna

Microfibers are the most common type of microplastics in freshwater environments. Anthropogenic climate stressors, such as freshwater acidification (FA), can interact with plastic pollution to disrupt freshwater ecosystems. However, the underlying mechanisms responsible for the interactive effects of microfibers and FA on aquatic organisms remain poorly understood. In this study, we investigated individual Daphnia magna-microbiota interactions affected by interactions between microfibers and FA (MFA). We found that the accumulated amount of microfibers in pH-treatment groups was significantly higher than in the control groups, resulting in negative consequences on reproduction, growth, and sex ratio. We also observed that MFA interactions induced immunity- and reproduction-related biological processes. In particular, the abundance of pathogenic bacteria increased only in MFA groups, indicating that MFA interactions can cause intestinal damage. Our integrated analysis of microbiomes and host transcriptomes revealed that synergistic adverse effects of MFAs are closely related to changes in microbial communities, suggesting that D. magna fitness and the microbial community are causally linked. These finding may help elucidate the toxicity mechanisms governing the responses of D. magna to microfibers and acidification interactions, and to host-microbiome-environment interactions.

Plasticiser leaching from polyvinyl chloride microplastics and the implications for environmental risk assessment

Microplastics in aquatic environments is a growing concern, particularly due to the leaching of chemical additives such as plasticisers. To develop comprehensive environmental risk assessments (ERAs) of high-concern polymers and plasticisers, an understanding of their leachability is required. This work investigated diethylhexyl phthalate (DEHP) and bisphenol A (BPA) leaching from polyvinyl chloride (PVC) microplastics (average diameter = 191 μm) under simulated marine conditions. Leaching behaviours were quantified using gel permeation chromatography (GPC) and thermal gravimetric analysis (TGA), and the polymer's physiochemical properties analysed using differential scanning calorimetry (DSC), Fourier Transform-Infrared Spectroscopy (FT-IR) and optical microscopy. Experimental data were fitted to a diffusion and boundary layer model, which found that BPA leaching was temperature-dependent (diffusion-limited), whereas DEHP leaching was controlled by surface rinsing. Model predictions also highlighted the importance of microplastic size on leaching dynamics. These data contribute towards greater accuracy in ERAs of microplastics, with implications for water quality and waste management, including decommissioning of plastic infrastructure.

Complex interactions among temperature, microplastics and cyanobacteria may facilitate cyanobacteria proliferation and microplastic deposition

Cyanobacterial blooms are a global concern prone to causing environmental and economic damages and are tightly linked to anthropogenic nutrient inputs. Likewise, microplastic pollution has also become globally ubiquitous inevitably co-occurring with blooms. However, little is known on how microplastics influence cyanobacterial physiologically and how potential physiological changes can affect their buoyancy, ultimately impacting their fate, and transport, including deposition during bloom events. Interactions of environmental relevant concentrations of high-density polyethylene microplastics (MPs) (0-0.4 mg/mL) and temperatures (2.5-32.5 °C) were evaluated to assess the effects of MPs on interactions of cyanobacteria Anabaena variabilis's growth, total organic carbon concentrations, extracellular polymeric substances (EPS) production, and MP deposition. Microplastics both stimulated and inhibited A. variabilis growth depending on the concentration. Lower MPs concentrations (0.1-0.2 mg/L) increased A. variabilis growth while higher MP concentrations (>0.3 mg/mL) impeded it across all temperatures studied. Carbon sources leached from MPs may have been a contributing factor to the increased growth at lower MPs concentration, while higher MPs concentration potentially shaded A. variabilis inhibiting its growth. Shading may have induced stress which corresponded with an observed increase in EPS production by A. variabilis when exposed to MP. Extracellular polymeric substances generation activated under adverse circumstances (MPs 0.4 mg/mL) enhanced MP deposition. Overall, our findings indicate that MPs play an important role in cyanobacterial blooms, and that these blooms may enhance MPs deposition.

Fate of microplastics under the influence of climate change

Plastic pollution and climate change are two major environmental focuses. Having the forming potential due to ambient plastic pollution, the environmental fate of microplastics shall be inevitably impacted by global warming. This manuscript discusses the destiny of environmental microplastics and characterizes their fate considering the framework of the planetary boundary. The major routes for microplastic discharge include the release of microplastic stored in the ice into the sea when the ice melts as a result of global temperature increase, flushing of the plastic/microplastic debris from the shorelines into the adjacent water bodies as a result of increased rainfall, redistribution of the microplastics away from the source of plastic debris as a result of increased wind, and accumulation of microplastics in the soil as a result of drought. A perspective on the impact of climate change and microplastic pollution on aquatic and soil organisms was discussed as well.

Geographical heterogeneity and dominant polymer types in microplastic contamination of lentic ecosystems: implications for methodological standardization and future research

This study examines the prevalence and distribution of microplastic polymer types in lentic ecosystems, revealing significant heterogeneity across different geographical regions and ecosystems. The most dominant type of microplastic observed was polyethylene (PE), followed by polypropylene (PP) and polystyrene (PS), which aligns with global production rates. North America, Asia, and Europe were identified as the regions with the highest microplastic contamination, with the United States, China, Italy, and Spain being the most affected countries. The physical characteristics of each ecosystem, such as wind speed, depth, and eutrophication, alongside seasonal variations, and anthropogenic activities, contributed to the observed heterogeneity in microplastics concentrations. The study highlights the need for further research on microplastics in lentic ecosystems, considering their unique physical characteristics and anthropogenic influences. A significant lack of methodological standardization in microplastics research was identified, leading to underestimation of microplastics prevalence and high heterogeneity in meta-analyses.

Litter per liter - Lakes' morphology and shoreline urbanization index as factors of microplastic pollution: Study of 30 lakes in NE Poland

Human activity and anthropopression play key roles in contaminating aquatic environments with microplastics (MPs). The lakes of northeastern Poland provide a wide range of freshwater ecosystems differing in morphology, hydrology and ecology. In this study, we investigate 30 lakes during summer stagnation, considering their varying levels of anthropogenization of the catchment area and taking into account increased tourist activity. MPs were found in each of the studied lakes in the range from 0.27 MPs/L to 1.57 MPs/L, and the average value was 0.78 ± 0.42 MPs/L. The features of the MPs were evaluated, including size, form and color (most frequent: 4-5 mm (35.0 %); fragments (36.7 %); blue (30.6 %), respectively). Gradual accumulation of MPs has been observed in the lakes that comprise the hydrological sequence. The amount of sewage produced by wastewater treatment plants was considered in the study area. Statistically significant differences were found between lakes with different surface areas and shoreline lengths, where lakes with the highest and smallest values were notably more polluted with MPs than lakes in the medium range (F = 34.64, p < .0001 and F = 5.96, p < .01, respectively). The study presents an easy-to-obtain shoreline urbanization index (SUI) that is particularly useful for lakes with heavily transformed catchments in terms of hydrology. A significant correlation between the MP concentration and SUI, reflecting the degree of direct catchment anthropopression (r = +0.4282; p < .05), was observed. The analysis of the human impact on shoreline conversions and development should also pique the interest of other researchers as a potential indicator of MP pollution.

Recent advances in the research on effects of micro/nanoplastics on carbon conversion and carbon cycle: A review

Massive production and spread application of plastics have led to the accumulation of numerous plastics in the global environment so that the proportion of carbon storage in these polymers also increases. Carbon cycle is of fundamental significance to global climate change and human survival and development. With the continuous increase of microplastics, undoubtedly, there carbons will continue to be introduced into the global carbon cycle. In this paper, the impact of microplastics on microorganisms involved in carbon transformation is reviewed. Micro/nanoplastics affect carbon conversion and carbon cycle by interfering with biological fixation of CO₂, microbial structure and community, functional enzymes activity, the expression of related genes, and the change of local environment. Micro/nanoplastic abundance, concentration and size could significantly lead to difference in carbon conversion. In addition, plastic pollution can further affect the blue carbon ecosystem reduce its ability to store CO₂ and marine carbon fixation capacity. Nevertheless, problematically, limited information is seriously insufficient in understanding the relevant mechanisms. Accordingly, it is required to further explore the effect of micro/nanoplastics and derived organic carbon on carbon cycle under multiple impacts. Under the influence of global change, migration and transformation of these carbon substances may cause new ecological and environmental problems. Additionally, the relationship between plastic pollution and blue carbon ecosystem and global climate change should be timely established. This work provides a better perspective for the follow-up study of the impact of micro/nanoplastics on carbon cycle.

In vitro wheat protoplast cytotoxicity of polystyrene nanoplastics

Nanoplastics are an emerging environmental pollutant, having a potential risk to the terrestrial ecosystem. In the natural environment, almost all the micro-or nano-plastics will be aged by many factors and their characterizations of the surface will be modified. However, the toxicity and mechanism of the modified polystyrene nanoparticles (PS-NPs) to plant cells are not clear. In the study, the amino- and carboxyl-modified PS-NPs with different sizes (20 and 200 nm) were selected as the typical representatives to investigate their effects on protoplast cell viability, reactive oxygen species (ROS) production in the cell and the leakage of cell-inclusion and apoptosis. The results indicated that the 20 nm amino-modified PS-NPs (PS-20A) could significantly damage the structure of the cell, especially the cell membrane, chloroplast and mitochondrion. After being modified by amino group, smaller size nanoplastics had the potential to cause more severe damage. In addition, compared with carboxyl-modified PS-NPs, the amino-modified PS-NPs induced more ROS production and caused higher membrane permeability/lactate dehydrogenase (LDH) leakage. Apoptosis assay indicated that the proportion of viable cells in the PS-20A treatment decreased significantly, and the proportion of necrotic cells increased by four times. This study provides new insights into the toxicity and damage mechanism of PS-NPs to terrestrial vascular plants at the cellular level, and guides people to pay attention to the quality and safety of agricultural products caused by nanoplastics.

Warming and microplastic pollution shape the carbon and nitrogen cycles of algae

Oceans absorb most excess heat from anthropogenic activities, leading to ocean warming. Moreover, microplastic pollution from anthropogenic activities is serious in marine environments and is accessible to various organisms. However, the combined effects of environmentally realistic ocean warming and microplastic pollution (OW+MP) on dominant marine species phytoplankton and related biochemical cycles are unclear. We investigated the combined effects on the dominant genera of diatoms (Chaetoceros gracilis, C. gracilis) over 100 generations. As a biological adjustment strategy, the growth rates of C. gracilis were nonsignificantly changed by OW+MP, body size decreased, and the chlorophyll a (Chl a) content and photosynthetic efficiency significantly decreased by 32.5% and 10.86%, respectively. The OW+MP condition inhibited carbon and nitrogen assimilation and sequestration capacity and allocated carbon into flexible forms of carbohydrates instead of proteins. Furthermore, the decrease in Si:C and Si:N ratios affected carbon transport to both the mesopelagic layer and deep ocean. Integrated transcriptomics and metabolomics showed that OW+MP disturbed ribosome and nitrogen metabolism. Given the rising concurrence of warming and MP pollution, the changes in metabolism suggest that the covariation in carbon, nitrogen and silicon biochemical cycles and the hidden influence on biodiversity and food web changes in the ocean should be reconsidered.

Environmental footprints of disposable and reusable personal protective equipment ‒ a product life cycle approach for body coveralls

Body coveralls, often made of single-use plastics, are essential Personal Protective Equipment (PPE) and, along with masks, are widely used in healthcare facilities and public spaces in the wake of the recent COVID-19 pandemic. The widespread use of these body coveralls poses a significant threat to terrestrial and aquatic ecosystems, given their polluting nature and disposal frequency. Therefore, it is necessary to promote the adoption of alternatives that increase the safe reusability of PPE clothing and reduce environmental and health hazards. This study presents a comparative Cradle-to-Grave Life Cycle Assessment (LCA) of disposable and reusable PPE body coveralls from a product life cycle perspective. A comprehensive life cycle inventory and LCA framework specific to Indian conditions have been developed through this study. The LCA is performed as per standard protocols using SimaPro software under recipe 2016 (H) impact assessment method. Six midpoint impact categories viz. Global Warming Potential, Terrestrial Acidification, Freshwater Eutrophication, Terrestrial Ecotoxicity, Human Carcinogenic Toxicity, and Water Consumption are assessed, along with Cumulative Energy Demand. Results suggest that reusable PPE improves environmental and human health performance in all the impact categories except water consumption. Sensitivity analysis reveals that replacing conventional electricity with solar energy for PPE manufacturing and disposal will provide additional environmental benefits. The findings can help the medical textile industries, healthcare workers, and policymakers to make environmentally informed choices.

Mechanistic insights into polyhydroxyalkanoate-enhanced denitrification capacity of microbial community: Evolution of community structure and intracellular electron transfer of nitrogen metabolism

Denitrification is the key driving force of nitrogen cycle in surface water and plays an important role in eutrophication water remediation. Compared with some other common carbon sources, such as glucose and sodium acetate, polyhydroxyalkanoates (PHAs) were found to have the distinguished advantages in screening specific denitrifying bacteria of natural surface water bodies. In this study, the large ensembles of taxa were obtained from surface water samples and then sub-cultured with PHA or glucose as the sole carbon source. The microbial community that could be screened by PHA was identified, and the environmental functions of these bacteria were analyzed. At the genus level, the main communities regulated by PHA included Pseudomonas (56.30 %), Acinetobacter (27.75 %), Flavobacterium (10.19 %) and Comamonas (3.14 %), which all had good denitrification ability. The changes in carbon source, nitrogen source and biomass (expressed by DNA) were simultaneously monitored when culturing the model strain (P. stuzeri) with PHA or glucose. Compared with the glucose group, less PHA was consumed to remove the same amount of nitrate within a shorter incubation time, and there was no significant difference in bacterial growth with PHA or glucose as the carbon source (glucose:ΔN:ΔC:ΔDNA = 1:18:0.072; PHA:ΔN:ΔC:ΔDNA = 1:11:0.063). PHA improved the denitrification efficiency by increasing the expression of NarGHI, NirB, NirK and NorB, i.e., the key enzymes in the denitrification process. In addition, PHA accelerated the assimilating rate of extracellular nitrate by bacteria through increasing the expression of NarK. Finally, PHA-regulated electron transfer during denitrification was studied by observing the changes in NADH and NAD⁺. PHA could use a large proportion of NADH to offer electrons for denitrification, which increased the rate of denitrification. Improved mechanistic insights into the PHA-enhanced denitrification capacity of the microbial community can provide novel options for the in-situ remediation of eutrophic surface water.

Applying fulvic acid for sediment metals remediation: Mechanism, factors, and prospect

Fulvic acid (FA) has been shown to play a decisive role in controlling the environmental geochemical behavior of metals. As a green and natural microbial metabolite, FA is widely used in environmental remediation because of its good adsorption complexation and redox ability. This paper introduces the reaction mechanism and properties of FA with metals, and reviews the progress of research on the remediation of metal pollutant by FA through physicochemical remediation and bioremediation. FA can control the biotoxicity and migration ability of some metals, such as Pb, Cr, Hg, Cd, and As, through adsorption complexation and redox reactions. The concentration, molecular weight, and source are the main factors that determine the remediation ability of FA. In addition, the ambient pH, temperature, metal ion concentrations, and competing components in sediment environments have significant effects on the extent and rate of a reaction between metals and FA during the remediation process. Finally, we summarize the challenges that this promising environmental remediation tool may face. The research directions of FA in the field of metals ecological remediation are also prospected. This review can provide new ideas and directions for the research of remediation of metals contaminants in sediments.

Adaptation of protein phosphatases in Oryza sativa and Cucumis sativus to microcystins

Microcystins (MCs) in irrigation water could inhibit crop growth and yield. Protein phosphatases (PPs) play an important role in regulating physiological mechanisms in plants to adapt abiotic stresses. To clarify the adaptation mechanism in plants to MCs stress, we compared PPs in rice and cucumber leaves by analyzing PPs total activity, protein phosphatase-2A (PP2A) activity and expression, as well as related growth and gas exchange parameters. After 7-day exposure of MCs (5 ~ 100 µg/L) and 7-day recovery without MCs, rice showed higher tolerance to MCs by analyzing dry weight and gas exchange parameters. Both crops may regulate PPs activity to adapt MCs stress by increasing the expression of genes encoding PPs. Among them, PP2A activity in two crops showed more sensitivity to MCs than total PPs activity. In addition, the higher expressions of PP2A catalytic and regulatory subunits and lower decrease PP2A activity were observed in rice leaves compared to cucumber. All results suggest that the expression levels of PP2A subunits could play a role in maintaining the activity of PP2A to regulating plant tolerance to MCs stress.

Evidence of coupled autotrophy and heterotrophy on plastic biofilms and its influence on surrounding seawater

We measured phytoplankton primary production and heterotrophic bacterial activities on microplastics and seawater in the Northwestern Mediterranean Sea during two 3-month spring periods over 2 consecutive years. Microorganisms growing on a 5 mm diameter low density polyethylene films (LDPE; 200 μm thick) faced two contrasting conditions depending on the year. Spring 2018 was characterized by consistent nutrient inputs and bloom development. In spring 2019, nutrient inputs and bloom were low. For the first time, we observed a clear coupling between primary production and heterotrophic prokaryote production on microplastics during both years, but with different intensity between years that reflected the crucial role of the trophic environmental conditions (nutrient supply) in shaping microbial activities on plastics. We found that high primary production on plastics could support the whole (net autotrophy) or the majority of the bacterial carbon demand needed for heterotrophic activities, supplemented by other carbon sources if surrounding waters are highly productive. We propose that microbial activity on plastics influences the microbial community in the surrounding seawater, especially when the environmental conditions are less favorable. An illustrative image of the role of plastics in the environment could be that of an inverter in an electrical circuit that mitigates both positive and negative variations. Our results highlight the potential role of the plastisphere in shaping biogeochemical cycles in the context of increasing amounts of plastic particles in the marine environment.

Experimental Evidence from the Field that Naturally Weathered Microplastics Accumulate Cyanobacterial Toxins in Eutrophic Lakes

Freshwater ecosystems with recurring harmful algal blooms can also be polluted with plastics. Thus the two environmental problems may interact. To test whether microplastics influence the partitioning of microcystins in freshwater lakes, we examined the sorption of four microcystin congeners to different polymers of commercially available plastics (low-density polyethylene, polyethylene terephthalate, polyvinyl chloride, and polypropylene). We conducted three experiments: a batch sorption experiment in the laboratory with pristine microplastics of four different polymers, a second batch sorption experiment in the laboratory to compare pristine and naturally weathered microplastics of a single polymer, and a 2-month sorption experiment in the field with three different polymers experiencing natural weathering in a eutrophic lake. This series of experiments led to a surprising result: microcystins sorbed poorly to all polymers tested under laboratory conditions (<0.01% of the initial amount added), irrespective of weathering, yet in the field experiment, all polymers accumulated microcystins under ambient conditions in a eutrophic lake (range: 0-84.1 ng/g). Furthermore, we found that the sorption capacity for microcystins differed among polymers in the laboratory experiment yet were largely the same in the field. We also found that the affinity for plastic varied among microcystin congeners, namely, more polar congeners demonstrated a greater affinity for plastic than less polar congeners. Our study improves our understanding of the role of polymer and congener type in microplastic-microcystin sorption and provides novel evidence from the field, showing that naturally weathered microplastics in freshwater lakes can accumulate microcystins. Consequently, we caution that microplastics may alter the persistence, transport, and bioavailability of microcystins in freshwaters, which could have implications for human and wildlife health. Environ Toxicol Chem 2022;41:3017-3028. © 2022 SETAC.

Variation of microplastics in the shore sediment of high-altitude lakes of the Indian Himalaya using different pretreatment methods

Microplastics pollution is a growing environmental concern. However, microplastics studies in high altitude remote lakes are scarce. In this study, microplastics pollution was assessed in the shore sediment of three high altitude lakes in Ladakh of the Indian Himalaya, namely Pangong Lake, Tsomoriri Lake and Tsokar Lake. Sampling of lakes shore sediment was performed in August 2019. Two different pretreatment methods were implemented with sediment samples from same sites, resulting two sets of samples. One set of samples was pretreated utilizing enzymatic degradation together with Fenton reactions. Another set of samples from the same sites were pretreated with 30 % hydrogen peroxide (H₂O₂) and Fenton reaction. Enzymatically pretreated samples resulted in higher microplastics concentrations than the set of H₂O₂ pretreated samples, which indicated that microplastics concentrations in sediment samples varies even among samples from the same site and that the pretreatment procedure may impact on the reported microplastics concentrations. Considering both sets of samples, microplastic concentration was 160-1000 MP/kg dw in Pangong Lake, 960-3800 MP/kg dw in Tsomoriri Lake, and 160-1000 MP/kg dw in Tsokar Lake. Blank correction based on the limit of detection and the limit of quantification indicated that microplastics concentrations at some sites of the studied lakes are higher than the limit of detection and the limit of quantification. The findings of this study indicated that the studied lakes in the Indian Himalaya are contaminated with microplastics. In addition, the comparison of microplastics using different pretreatment methods illustrated the importance of harmonization of microplastics studies to enable a reliable comparison among microplastics data. Therefore, this study contributes towards an assessment of microplastics in the high-altitude lakes in Indian Himalaya. The findings attributed towards clearer understanding regarding the need of harmonization of pretreatment methods and demonstrated the importance of reporting complete information in microplastics research.

Qualitative characterisation and identification of microplastics in a freshwater dam at Gauteng Province, South Africa, using pyrolysis-gas chromatography-time of flight-mass spectrometry (Py-GC-ToF-MS)

Pyrolysis GC-ToF-MS-based analytical study was employed in the identification of microplastics (MPs) in the freshwater of a dam Rietvlei (RTV) located at Gauteng Province, South Africa. These MPs extracted in five locations of the dam were found to contain five different plastic polymeric constituents including PE, PS, PA, PVC and PET along with phthalate esters and fatty acid (amides and esters) derivatives as additives. Based on the fragmented pyrolyzate products, the contribution of plastic polymers and additives was 74% and 26% respectively. Among polymers, PA was dominant with 52% followed by PVC (16%) and others (13%) such as PE, PET and PS in MPs. Scanning electron micrographs of MPs in this aquatic body displayed the rough and fibrous typed patterns. The residual mass of 8-14% was left after the thermal degradation of MPs in RTV samples in the temperature range of 500-550 °C. The results of thermogravimetry (TGA) and energy-dispersive (EDS) analyses are mutually dependent and coherent to each other by way of demonstrating the presence of various inorganic compounds in the form of additives and/or sorbates. The lessened intensities of carbonyl stretching in PA (1625 cm-1) and PET (1725 cm-1) type of MPs attributed the occurrence of degradation and weathering in this aquatic system. The possible causes to the contamination of MPs in this freshwater are the located industries and poor waste management strategies being practised in this densely populated city. Based on the industry, waste management and population perspectives, the increased contamination of MPs is very likely in this freshwater which will drastically affect the ecosystem in the near future. Based on the characterisation results, the presence of various polymers, additives and the metals in MPs is envisaged to deteriorate the aquatic life along with successive risks for the people as a consequence of bio-magnification.

Patterns of internal nitrogen and phosphorus loadings in a cascade reservoir with a large water level gradient: Effects of reservoir operation and water depth

Internal nutrient loadings pose a high risk of being an additional N and P source, exacerbating eutrophication and deteriorating water quality. In this study, we selected the Daheiting Reservoir (DHTR) in North China, with a pronounced water level gradient, to investigate internal N and P loadings, estimate N and P fluxes across the sediment‒water interface based on the pore water profiles, and reveal the potential effects of water discharge from an upstream reservoir and high-intensity cage aquaculture on the risks of internal N and P release. The results indicated that DHTR presented with severe internal nutrient loadings, and the N and P fluxes showed significant spatiotemporal variations. NH₄⁺-N and soluble reactive phosphorus (SRP) fluxes were higher in deep areas (averages of 26.14 and 9.9 mgm^-2d^-1, respectively) than in shallow areas near inflows (averages of 5.0 and 1.24 mgm^-2d^-1, respectively). Unexpectedly, the estimated NH₄⁺-N and SRP fluxes were the lowest in summer (averages of 3.94 and 0.33 mgm^-2d^-1, respectively), which may have been influenced by seasonal thermal stratification and copious discharge from the hypolimnion of the upstream reservoir (Panjiakou Reservoir). Comparison of annual internal and external N and P loadings revealed that water discharge from the upstream Panjiakou Reservoir was the dominant source of N and P to the reservoir, contributing up to 83.6% of N input and 55.4% of P input. The internal P loading also contributed to water eutrophication to a great extent, accounting for 34.7% of the total P input. Our results highlight the impact of upstream reservoir discharge operation on downstream reservoir water quality and the importance of controlling the internal nutrient loading in cascade reservoirs, and further provide theoretical and practical foundations for the development of policies and strategies to conserve reservoir ecosystems.

Microplastics distribution characteristics in typical inflow rivers of Taihu lake: Linking to nitrous oxide emission and microbial analysis

The microplastics in nature water are important for the environmental fate of nitrous oxide (N₂O). This study investigated the influence and microbial mechanism of microplastic abundance to the N₂O flux in typical inflow rivers of Taihu lake. The microplastic abundance were in a range of 160-700 particles/m³ surface water, and 514-3018 particles/kg dry sediment. The highest percentage of microplastic color was transparent, significantly higher than other color (p<0.0001) in both surface water and sediment. The dominant microplastic size was 500-5000 μm in surface water, while size lower than 1000 μm was dominant in sediment. The microplastic abundance in sediment was negatively correlated with the concentration of suspended sediments (SPS) (p<0.05), Chl-a (p<0.05), NH₄⁺-N (p<0.05) and TP (p<0.01) in inflow river surface water. The dissolved N₂O concentration were 45.71-132.42 nmol/L, and the N₂O fluxes were 29.85-276.60 μmol/m²/d. The dissolved N₂O concentration was significantly correlated with the nirK abundance and nirK/nosZI ratio negatively (p<0.05), revealed that sediment nirK-type denitrification was the main driver of dissolved N₂O. Meanwhile, the N₂O flux (water-air interface) was significantly correlated with nosZI, napA, narG and nirS negatively, implied that nitrification and denitrification interaction in sediment is the main influence factor. The denitrification process in sediment was the main driven factor of N₂O releasing. Mantel-test shows that microplastic abundance in surface water was significantly correlated with nitrification (p = 0.001∼0.01) and denitrification (p = 0.01∼0.05) genera in water. The dominant denitrification microorganism was Dechloromonas in sediment and Flavobacterium in surface water. These results provided new insight into the fact that plastisphere which comprises microbial community on microplastic could affect the N₂O emission in aquatic system.

Aquatic ecosystem responds differently to press and pulse nutrient disturbances as revealed by a microcosm experiment

Due to climate change and increasing anthropogenic activities, lakes are disturbed frequently, usually by press (e.g., diffused pollution, rising temperatures) or pulse (e.g., storms, rainfall, pollution events) disturbances. Both press and pulse disturbances can affect abiotic and biotic environments, changing the structure of ecosystems and affecting ecosystem services. To confront with the effects of climate change and increasing anthropogenic activities, understanding the different effects of press and pulse disturbances on lake ecosystems is essential. This study assessed the effect of press and pulse disturbances of phosphorus on a microcosmic aquatic ecosystem by measuring the total phosphorus (TP), algae density, and physiological indicators of submerged macrophytes. We found that the microcosmic aquatic ecosystem responded differently to press and pulse disturbances. Our results suggested that it had a lower resistance to pulse phosphorus disturbances than to press phosphorus disturbances. There were significantly higher nutrient concentrations and algal densities in the pulse treatment than in the press treatment. Positive feedback was found between the biomass of submerged macrophytes and the water quality. There was a higher submerged macrophytes biomass at low TP concentration and algal density. In the context of climate change, press and pulse disturbances could have severe impacts on lake ecosystems. Our findings will provide some insight for further research and lake management.

Assessing sediment organic pollution via machine learning models and resource performance

Due to the potential ecological risks of organic pollution in sediments, aquatic ecosystems are currently facing substantial environmental threats. Assessing and controlling sediment pollution has become a huge challenge. Therefore, this study proposes a novel strategy for predicting organic pollution indicators for sediment, as well as an effective resource-utilization method. Contaminated sediments were converted into catalysts for sulfate radical advanced oxidation technologies by a one-step calcination method. The results revealed that the catalyst excelled in activating peroxymonosulfate to degrade tetracycline via a non-radical pathway. Most importantly, a predictive model of organic pollution indicators was established by machine learning. This study provides a novel approach for resource utilization and a strategy for assessing organic pollution in sediments.

Heavy metal remediation from wastewater using microalgae: Recent advances and future trends

Microalgae-based wastewater treatment has previously been carried out in huge waste stabilization ponds. Microalgae, which can absorb carbon dioxide while reusing nutrients from sewage, has recently emerged as a new trend in the wastewater treatment business. Microalgae farming is thought to be a potential match for the modern world's energy strategy, which emphasizes low-cost and environmentally benign alternatives. Microalgae are being used to treat wastewater and make useful products. Microalgae, for example, is a promising renewable resource for producing biomass from wastewater nutrients because of its quick growth rate, short life span, and high carbon dioxide utilization efficacy. Microalgae-based bioremediation has grown in importance in the treatment of numerous types of wastewater in recent years. This solar-powered wastewater treatment technology has huge potential. However, there are still issues to be resolved in terms of land requirements, as well as the process's ecological feasibility and long-term viability, before these systems can be widely adopted. Due to cost and the need for a faultless downstream process, it is difficult to deploy this technology on a large scale. Other recent breakthroughs in wastewater microalgae farming have been investigated, such as how varied pressures affect microalgae growth and quality, as well as the number of high-value components produced. In this review, the future of this biotechnology has also been examined.

Microplastic loads within riverine fishes and macroinvertebrates are not predictable from ecological or morphological characteristics

Microplastics are a relatively new but important form of freshwater contamination that can be ingested by a range of different species, with particle counts thought to be predictable from species ecology and morphology. Here, we report levels of microplastics in a 26 μm-5 mm size range within the macroinvertebrate and fish community of a lowland river (Dorset Stour, SW England), and test the hypothesis that counts are predictable from characteristics such as feeding guild, body length and trophic position. Macroinvertebrates (n = 257, 12 taxa) and fish (n = 418, 9 species) were collected from distinct river reaches by kick sampling and rod and line angling, respectively. Batches of whole macroinvertebrates and individual fish gastrointestinal tracts were digested with 30% hydrogen peroxide before microplastic screening and FTIR polymer confirmation on a particle subset. Particles were found in 40% of pooled macroinvertebrate batches (taxa incidences: 14-75%) and 39% of fishes (species incidences: 29-47%). Dominant particle feature categories were ≤100 μm, blue/green, fragments and fibres identified as various polyolefins. Although particle counts in macroinvertebrates were highest in Ephemeroptera (mean of 0.74 particles per individual), the relationships between particle loads, batch number and guild were all non-significant. In fishes, particle counts were not significantly related to species, stomach structure, feeding guild or body length, with spatial differences also not apparent across the catchment. Individual fish particle counts were similarly not significantly associated with their trophic positions (calculated from bulk δ¹⁵N values for a subset of fishes) and parasite load of Pomphorhynchus tereticollis. Correlations between fish and macroinvertebrate particle counts within specific river reaches were also not significant. In entirety, these results indicated although loadings of microplastic particles were relatively consistent within the two communities, they were not predictable from any of their ecological or morphological characteristics.

Increased food availability reducing the harmful effects of microplastics strongly depends on the size of microplastics

Shallow lakes and ponds, providing essential ecological and environmental services, are simultaneously disrupted by various pollutants of emerging concern (PECs). As a group of PECs, microplastics (MPs) ubiquitously found in freshwater are toxic to a huge variety of organisms. However, the consequence of secondary factors such as food quantity determining MPs toxicity, and the corresponding water safety risks await assessment is still poorly understood. Accordingly, we investigated how MPs across three particle sizes (10, 1 and 0.07 µm) interacted with food abundance to affect survival, reproduction and population performance in the waterflea Daphnia magna. Across multiple population traits, we found that MPs toxicity on Daphnia population performance was attenuated by higher food quantity, but this attenuation size was strongly dependent on MPs size. Path analysis results showed population growth rate was mainly constrained by reduced survival rather than fecundity. Furthermore, the additive null model revealed that the interactive effects of food abundance and MPs were predominately recognized as synergism and trait dependency. The present findings underscore the importance of considering the complexity of interactions that can occur in the wild, when assessing the effects of plastics pollution on population dynamics of the basic trophic level in lakes and ponds.