PET-microplastics as a vector for heavy metals in a simulated plant rhizosphere zone

Toxicity assessment of animal manure composts containing environmental microplastics by using earthworms Eisenia andrei

Nowadays, animal manure composting constitutes a sustainable alternative for farmers to enhance the level of nutrients within soils and achieve a good productivity. However, pollutants may be present in manures. This study focuses on the detection of environmental microplastics (EMPs) into composts, as well as on the assessment of their potential toxicity on the earthworm Eisenia andrei. To these aims, animals were exposed to two types of compost, namely bovine (cow) and ovine (sheep) manure, besides to their mixture, for 7 and 14 days. The presence and characterization of EMPs was evaluated in all the tested composts, as well as in tissues of the exposed earthworms. The impact of the tested composts was assessed by a multi-biomarker approach including cytotoxic (lysosomal membrane stability, LMS), genotoxic (micronuclei frequency, MNi), biochemical (activity of catalase, CAT, and glutathione-S-transferase, GST; content of malondialdehyde, MDA), and neurotoxic (activity of acetylcholinesterase, AChE) responses in earthworms. Results indicated the presence of high levels of EMPs in all the tested composts, especially in the sheep manure (2273.14 ± 200.89 items/kg) in comparison to the cow manure (1628.82 ± 175.23 items/kg), with the size <1.22 μm as the most abundant EMPs. A time-dependent decrease in LMS and AChE was noted in exposed earthworms, as well as a concomitant increase in DNA damages (MNi) after 7 and 14 days of exposure. Also, a severe oxidative stress was recorded in animals treated with the different types of compost through an increase in CAT and GST activities, and LPO levels, especially after 14 days of exposure. Therefore, it is necessary to carefully consider these findings for agricultural good practices in terms of plastic mitigation in compost usage, in order to prevent any risk for environment health.

Toxicity and fate of cadmium in hydroponically cultivated lettuce (Lactuca sativa L.) influenced by microplastics

Although more attention has been paid to microplastics (MPs) pollution in environment, research on the synthetic influence of microplastic and heavy metals remains limited. To help fill this information gap, we investigated the adsorption behavior of virgin polyvinyl chloride microplastics (PVCMPs) (≤450 µm white spherical powder) on cadmium (II). The effects on seed germination, seedling growth, photosynthetic system, oxidative stress indicators of lettuce, and changes in Cd bioavailability were evaluated under Cd2+ (25 μmol/L), PVCMPs (200 mg/L), and PVCMP-Cd combined (200 mg/L + 25 μmol/L) exposures in hydroponic system. The results demonstrated that the PVCMPs effectively adsorbed Cd ions, which validated by the pseudo-second-order kinetic and the Langmuir isotherm models, indicating the sorption of Cd2+ on the PVCMPs was primary chemisorption and approximates monomolecular layer sorption. Compared to MPs, Cd significantly inhibits plant seed germination and seedling growth and development. However, Surprising improvement in seed germination under PVCMPs-Cd exposure was observed. Moreover, Cd2+ and MPs alone or combined stress caused oxidative stress with reactive oxygen species (ROS) including H2O2, O2- and Malondialdehyde (MDA) accumulation in plants, and substantially damaged to photosynthesis. With the addition of PVCMPs, the content of Cd in the leaves significantly (P<0.01) decreased by 1.76-fold, and the translocation factor and Cd2+removal rate in the water substantially (P<0.01) decreased by 6.73-fold and 1.67-fold, respectively in contrast to Cd2+ stress alone. Therefore, it is concluded the PVCMP was capable of reducing Cd contents in leaves, alleviating Cd toxicity in lettuce. Notably, this study provides a scientific foundation and reference for comprehending the toxicological interactions between microplastics and heavy metals in the environment.

Effects of combined microplastics and heavy metals pollution on terrestrial plants and rhizosphere environment: A review

Microplastics (MPs) can enter the soil environment through industry, agricultural production and daily life sources. Their interaction with heavy metals (HMs) poses a significant threat to a variety of terrestrial ecosystems, including agricultural ones, thereby affecting crop quality and threatening human health. This review initially addresses the impact of single and combined contamination with MPs and HMs on soil environment, including changes in soil physicochemical properties, microbial community structure and diversity, fertility, enzyme activity and resistance genes, as well as alterations in heavy metal speciation. The article further explores the effects of this pollution on the growth characteristics of terrestrial plants, such as plant biomass, antioxidant systems, metabolites and photosynthesis. In general, the combined contaminants tend to significantly affect soil environment and terrestrial plant growth, i.e., the impact of combined contaminants on plants weight ranged from -87.5% to 4.55%. Similarities and differences in contamination impact levels stem from the variations in contaminant types, sizes and doses of contaminants and the specific plant growth environments. In addition, MPs can not only infiltrate plants directly, but also significantly affect the accumulation of HMs in terrestrial plants. The heavy metals concentration in plants under the treatment of MPs were 70.26%-36.80%. The co-occurrence of these two pollution types can pose a serious threat to crop productivity and safety. Finally, this study proposes suggestions for future research aiming to address current gaps in knowledge, raises awareness about the impact of combined MPs + HMs pollution on plant growth and eco-environmental security.

Microplastic contamination in Ashtamudi Lake, India: Insights from a Ramsar wetland

Estuaries function as temporary storage sites for plastic debris, influencing the distribution of microplastics (MPs) across ecosystems. This research delves into the presence of MPs in the water, sediment, fish, and shellfish of Ashtamudi Lake, a Ramsar wetland with brackish water located on the southwest coast of India. Given the lake's significance in supporting the livelihoods of numerous fishers and acting as a vital source of fishery resources for both local consumption and export, examining the contamination of the system by MPs becomes particularly pertinent. The highest percentage composition of MPs was found in macrofauna at 60.6% (with fish at 19.6% and shellfish at 40.9%), followed by sediment (22.8%) and water (16.7%). The primary types of MPs identified in all samples were fibers (35.6%), fragments (33.3%), and films (28%), with beads being the least represented at 3.03%. ATR-FTIR and Raman spectra analysis identified five polymers from shellfish (polypropylene, polyethylene, polystyrene, nylon, and polyvinyl chloride), five from fish guts (nylon, polypropylene, polyethylene, polyurethane, and polysiloxane), four in sediment (polypropylene, polyethylene, nylon, rayon), and four in water samples (polypropylene, polyethylene, nylon, and polystyrene). SEM-EDAX analysis of MPs obtained from the samples revealed degradation and the presence of inorganic elements such as Na, Mg, Al, Si, S, K, Cl, P, and Ca, as well as heavy metals like Pb, Mo, Rh, Pd, Ti, and Fe. The existence of these plastic polymers and heavy metals in microplastic samples poses a threat to vulnerable biota; people consume contaminated fish and shellfish, underscoring the importance of monitoring MPs in lake water. This investigation of MPs in Ashtamudi Lake highlights the system's susceptibility to plastic pollution and the bioavailability of smaller MPs to aquatic organisms. Identified sources of MPs in the lake include fishing and aquaculture activities, sewage pollution, improper solid waste management in lake watersheds, and unsustainable tourism. Upstream and downstream management interventions are recommended to address MP pollution in Ashtamudi Lake.

Physiological and biochemical effects of polystyrene micro/nano plastics on Arabidopsis thaliana

Microplastics have garnered global attention due to their potential ecological risks. Research shows micro/nano-plastics pollution has adverse effects on plant growth, development, and physiological characteristics. However, the mechanisms underlying these effects remain unclear. The study examined the effects of polystyrene micro/nano-plastics with varying sizes and concentrations on different physiological and biochemical markers of A. thaliana. The indicators assessed include seed viability, growth, chlorophyll content, accumulation of root reactive oxygen species, and root exudates. Using fluorescence labeling, we investigated the absorption and translocation processes of micro/nano-plastics in A. thaliana. We also performed transcriptomic analysis to better understand the particular mechanisms of micro/nano-plastics. It indicated that micro/nano-plastics had an adverse effect on seed germination, especially under high concentration and small particle size treatments. This effect diminished with prolonged exposure. High concentrations at 50 nm and 100 nm treatment groups significantly inhibited the growth. Conversely, low concentrations of 1000 nm had a promoting effect. Exposure to micro/nano-plastics potentially resulted in decreased chlorophyll content, the accumulation of H2O2 in roots, and stimulated root secretion of oxalic acid. Through transcriptomic analysis, the gene expression linked to micro/nano-plastic treatments of varying sizes enriched multiple metabolic pathways, impacting plant growth, development, environmental adaptation, metabolism, pigment synthesis, and stress response.

Combined effects of micron-sized polyvinyl chloride particles and copper on seed germination of perilla

Microplastics (MPs) and copper (Cu) pollution coexist widely in cultivation environment. In this paper, polyvinyl chloride (PVC) were used to simulate the MPs exposure environment, and the combined effects of MPs + Cu on the germination of perilla seeds were analyzed. The results showed that low concentrations of Cu promoted seed germination, while medium to high concentrations exhibited inhibition and deteriorated the morphology of germinated seeds. The germination potential, germination index and vitality index of 8 mg • L-1 Cu treatment group with were 23.08%, 76.32% and 65.65%, respectively, of the control group. The addition of low concentration PVC increased the above indicators by 1.27, 1.15, and 1.35 times, respectively, while high concentration addition led to a decrease of 65.38%, 82.5%, and 66.44%, respectively. The addition of low concentration PVC reduced the amount of PVC attached to radicle. There was no significant change in germination rate. PVC treatment alone had no significant effect on germination. MPs + Cu inhibited seed germination, which was mainly reflected in the deterioration of seed morphology. Cu significantly enhanced antioxidant enzyme activity, increased reactive oxygen species (ROS) and MDA content. The addition of low concentration PVC enhanced SOD activity, reduced MDA and H2O2 content. The SOD activity of the Cu2+8 + PVC10 group was 4.05 and 1.35 times higher than that of the control group and Cu treatment group at their peak, respectively. At this time, the CAT activity of the Cu2+8 + PVC5000 group increased by 2.66 and 1.42 times, and the H2O2 content was 2.02 times higher than the control. Most of the above indicators reached their peak at 24 h. The activity of α-amylase was inhibited by different treatments, but β-amylase activity, starch and soluble sugar content did not change regularly. The research results can provide new ideas for evaluating the impact of MPs + Cu combined pollution on perilla and its potential ecological risk.

Meta-analysis of impacts of microplastics on plant heavy metal(loid) accumulation

The co-occurrence of microplastics (MPs) and heavy metal(loid)s (HMs) has attracted growing scientific interest because of their wide distribution and environmental toxicity. Nevertheless, the interactions between MPs and HMs in soil-plant systems remain unclear. We conducted a meta-analysis with 3226 observations from 87 independent studies to quantify the impact of MPs addition on the plant biomass and HMS accumulation. Co-occurrence of MPs and HMs (except for As) induced synergistic toxicity to plant growth. MPs promoted their uptake in the shoot by 11.0% for Cd, 30.0% for Pb, and 47.1% for Cu, respectively. In contrast, MPs caused a significant decrease (22.6%, 17.9-26.9%) in the shoot As accumulation. The type and dose of MPs were correlated with the accumulation of HMs. MPs increased available concentrations of Cd, Pb, and Cu, but decreased available As concentration in soils. Meanwhile, MPs addition significantly lowered soil pH. These findings may provide explanations for MPs-mediated effects on influencing the accumulation of HMs in plants. Using a machine learning approach, we revealed that soil pH and total HMs concentration are the major contributors affecting their accumulation in shoot. Overall, our study indicated that MPs may increase the environmental risks of HMs in agroecosystems, especially metal cations.

Joint toxicity of cadmium (II) and microplastic leachates on wheat seed germination and seedling growth

Cadmium (Cd) pollution ranks first in soils (7.0%) and microplastics usually have a significant adsorption capacity for it, which could pose potential threats to agricultural production and human health. However, the joint toxicity of Cd and microplastics on crop growth remains largely unknown. In this study, the toxic effects of Cd2+ and two kinds of microplastic leachates, polyvinyl chloride (PVC) and low-density polyethylene (LDPE), on wheat seed germination and seedlings' growth were explored under single and combined conditions. The results showed that Cd2+ solution and two kinds of microplastic leachates stimulated the wheat seed germination process but inhibited the germination rate by 0-8.6%. The combined treatments promoted wheat seed germination but inhibited the seedlings' growth to different degrees. Specifically, the combination of 2.0 mg L-1 Cd2+ and 1.0 mgC L-1 PVC promoted both seed germination and seedlings' growth, but they synergistically increased the antioxidant enzyme activity of seedlings. The toxicity of the PVC leachate to wheat seedlings was stronger than LDPE leachate. The addition of Cd2+ could alleviate the toxicity of PVC leachate on seedlings, and reduce the toxicity of LDPE leachate on seedlings under the same concentration class combinations but aggravated stress under different concentration classes, consistent with the effect on seedlings' growth. Overall, Cd2+, PVC, and LDPE leachates have toxic effects on wheat growth, whether treated under single or combined treatments. This study has important implications for the joint toxicity of Cd2+ solution and microplastic leachates in agriculture.

Interaction of microplastics with heavy metals in soil: Mechanisms, influencing factors and biological effects

Microplastics (MPs) and heavy metals (HMs) in soil contamination are considered an emerging global problem that poses environmental and health risks. However, their interaction and potential biological effects remain unclear. Here, we reviewed the interaction of MPs with HMs in soil, including its mechanisms, influencing factors and biological effects. Specifically, the interactions between HMs and MPs mainly involve sorption and desorption. The type, aging, concentration, size of MPs, and the physicochemical properties of HMs and soil have significant impacts on the interaction. In particular, MP aging affects specific surface areas and functional groups. Due to the small size and resistance to decomposition characteristics of MPs, they are easily transported through the food chain and exhibit combined biological effects with HMs on soil organisms, thus accumulating in the human body. To comprehensively understand the effect of MPs and HMs in soil, we propose combining traditional experiments with emerging technologies and encouraging more coordinated efforts.

Susceptibility of Cd availability in microplastics contaminated paddy soil: Influence of ferric minerals and sulfate reduction

The combined contamination of cadmium (Cd) and microplastics (MPs) in paddy soil always occurred, while its influence on Cd availability remained unclear. This study investigated the Cd availability in Cd-MPs co-contaminated paddy soil in consideration of both ferric minerals and sulfate reduction under flooding conditions. The presence of MPs resulted in a higher Cd releasing risk, as represented by the increase in the available Cd and decrease in Fe-Mn oxide-bound Cd contents, especially on the 7th and 14th days based on the sequential extraction results. MPs facilitated the formation of Fe-organic ligands, which accelerated the reductive dissolution of iron minerals but decreased the amounts of amorphous iron minerals due to the release of dissolved organic substances into pore water. Furthermore, MPs promoted the relative abundance of sulfate-reducing bacteria (such as Streptomyces and Desulfovibrio genera), thus increasing the contents of reductive S species, which was advantageous to the co-precipitation of Fe, S, and Cd on the surface of MPs based on our experimental and statistical results. Taken together, both iron and sulfate reduction under anaerobic conditions played a critical role in Cd mobilization in Cd-MPs co-contaminated paddy fields.

Occurrence, transport, and toxicity of microplastics in tropical food chains: perspectives view and way forward

Microplastics, which have a diameter of less than 5 mm, are becoming an increasingly prevalent contaminant in terrestrial and aquatic ecosystems due to the dramatic increase in plastic production to 390.7 million tonnes in 2021. Among all the plastics produced since 1950, nearly 80% ended up in the environment or landfills and eventually reached the oceans. Currently, 82-358 trillion plastic particles, equivalent to 1.1-4.9 million tonnes by weight, are floating on the ocean's surface. The interactions between microorganisms and microplastics have led to the transportation of other associated pollutants to higher trophic levels of the food chain, where microplastics eventually reach plants, animals, and top predators. This review paper focuses on the interactions and origins of microplastics in diverse environmental compartments that involve terrestrial and aquatic food chains. The present review study also critically discusses the toxicity potential of microplastics in the food chain. This systematic review critically identified 206 publications from 2010 to 2022, specifically reported on microplastic transport and ecotoxicological impact in aquatic and terrestrial food chains. Based on the ScienceDirect database, the total number of studies with "microplastic" as the keyword in their title increased from 75 to 4813 between 2010 and 2022. Furthermore, various contaminants are discussed, including how microplastics act as a vector to reach organisms after ingestion. This review paper would provide useful perspectives in comprehending the possible effects of microplastics and associated contaminants from primary producers to the highest trophic level (i.e. human health).

Micro/nanoplastics: Critical review of their impacts on plants, interactions with other contaminants (antibiotics, heavy metals, and polycyclic aromatic hydrocarbons), and management strategies

Microplastic/nanoplastics (MPs/NPs) contamination is not only emerging threat to the agricultural system but also constitute global hazard to the environment worldwide. Recent review articles have addressed the environmental distribution of MPs/NPs and their single-exposure phytotoxicity in various plant species. However, the mechanisms of MPs/NPs-induced phytotoxicity in conjunction with that of other contaminants remain unknown, and there is a need for strategies to ameliorate such phytotoxicity. To address this, we comprehensively review the sources of MPs/NPs, their uptake by and effects on various plant species, and their phytotoxicity in conjunction with antibiotics, heavy metals, polycyclic aromatic hydrocarbons (PAHs), and other toxicants. We examine mechanisms to ameliorate MP/NP-induced phytotoxicity, including the use of phytohormones, biochar, and other plant-growth regulators. We discuss the effects of MPs/NPs -induced phytotoxicity in terms of its ability to inhibit plant growth and photosynthesis, disrupt nutrient metabolism, inhibit seed germination, promote oxidative stress, alter the antioxidant defense system, and induce genotoxicity. This review summarizes the novel strategies for mitigating MPs/NPs phytotoxicity, presents recent advances, and highlights research gaps, providing a foundation for future studies aimed at overcoming the emerging problem of MPs/NPs phytotoxicity in edible crops.

Microplastic interactions in the agroecosystems: methodological advances and limitations in quantifying microplastics from agricultural soil

The instantaneous growth of the world population is intensifying the pressure on the agricultural sector. On the other hand, the critical climate changes and increasing load of pollutants in the soil are imposing formidable challenges on agroecosystems, affecting productivity and quality of the crops. Microplastics are among the most prevalent pollutants that have already invaded all terrestrial and aquatic zones. The increasing microplastic concentration in soil critically impacts crop plants growth and yield. The current review elaborates on the behaviors of microplastics in soil and their impact on soil quality and plant growth. The study shows that microplastics alter the soil's biophysical properties, including water-holding capacity, bulk density, aeration, texture, and microbial composition. In addition, microplastics interact with multiple pollutants, such as polyaromatic hydrocarbons and heavy metals, making them more bioavailable to crop plants. The study also provides a detailed insight into the current techniques available for the isolation and identification of soil microplastics, providing solutions to some of the critical challenges faced and highlighting the research gaps. In our study, we have taken a holistic, comprehensive approach by analysing and comparing various interconnected aspects to provide a deeper understanding of all research perspectives on microplastics in agroecosystems.

Iron minerals: A frontline barrier against combined toxicity of microplastics and arsenic

The coexistence of microplastics (MPs) and arsenic (As) in terrestrial ecosystems presents challenges to controlling soil pollution and performing environmental risk assessments. In this study, the interactions among As, polystyrene MPs, and goethite in porous media were investigated and the individual and combined toxicities of MPs and As on wheat germination were evaluated. An additional experiment was conducted to assess the mitigating effect of goethite on the toxicity of the two contaminants. The results showed that the presence of MPs reduced As accumulation in wheat and decreased the acute lethal toxicity of As pollutants (the half-lethal concentration of As during wheat germination increased by 68.21%). However, MPs exhibited inhibitory effects on wheat germination and served as carriers to promote the migration of As within the plant body. The addition of goethite mitigated both individual and combined toxicities and further increased the half-lethal concentration for the combined pollution of As and MPs by 39.48%. This was primarily attributed to the adsorption and immobilization of arsenate and MPs on the medium and root surfaces. In our study, goethite reduced soluble As by 48.29% under the combined pollution scenarios and formed iron plaques on wheat roots, effectively obstructing pollutant entry. Thus, iron minerals serve as pioneering barriers to combined toxicity. Our findings contribute to the understanding of the combined toxicity of MPs and As in crops and offer potential strategies for managing combined pollution.

Synergistic effects of microplastic and lead trigger physiological and biochemical impairment in a mangrove crab

Microplastics (MP) are vectors for other environmental contaminants, such as metals, being a considerable problem, especially in the aquatic ecosystem. To investigate the combined effects of MP (high density polyethylene) with lead (Pb), we exposed the mangrove fiddler crab Minuca vocator to Pb (50 mg L-1), and MP (25 mg L-1) alone and in mixture, for 5 days. We aimed to determine Pb and MP bioaccumulation, as well as physiological (oxygen consumption and hemolymph osmolality) and biochemical (superoxide dismutase, catalase, glutathione peroxidase, and lipid peroxidation) traits effects. Co-exposure of MP and Pb significantly increased the bioaccumulation of Pb, but reduced MP tissue accumulation. Regarding the physiological traits, increasing osmolality and oxygen consumption rates compared to the control were observed, particularly in the combined Pb and MP exposure. As to biochemical traits, the combination of Pb and MP induced the most significant responses in the enzymatic profile antioxidant enzyme activity. The catalase (CAT), glutathione peroxidase (GPx), and dismutase superoxide (SOD) decreased compared to individual exposure effects; the combination of MP and Pb had a synergistic effect on promoting lipid peroxidation (LPO). The co-exposure of MP and Pb acted synergistically when compared to the effects of the isolated compounds. Due to the increasing MP contamination in mangroves, more severe physiological and biochemical effects can be expected on mangrove crabs exposed to metal contamination.

Connecting the Dots: Livestock Animals as Missing Links in the Chain of Microplastic Contamination and Human Health

Plastic pollution is a global diffuse threat, especially considering its fragmentation into microplastics (MPs) and nanoplastics (NPs). Since the contamination of the aquatic environment is already well studied, most studies have now focused on the soil. Moreover, the number of studies on the exposure routes and toxic effects of MNPs in humans is continuously increasing. Although MNPs can cause inflammation, cytotoxicity, genotoxicity and immune toxicity in livestock animals, which can accumulate ingested/inhaled plastic particles and transfer them to humans through the food chain, research on this topic is still lacking. In considering farm animals as the missing link between soil/plant contamination and human health effects, this paper aims to describe their importance as carriers and vectors of MNP contamination. As research on this topic is in its early stages, there is no standard method to quantify the amount and the characteristics of MNPs in different matrices. Therefore, the creation of a common database where researchers can report data on MNP characteristics and quantification methods could be helpful for both method standardization and the future training of an AI tool for predicting the most abundant/dangerous polymer(s), thus supporting policy decisions to reduce plastic pollution and perfectly fitting with One Health principles.

Exploration of microplastic concentration in indoor and outdoor air samples: Morphological, polymeric, and elemental analysis

Microplastics are ubiquitously pervasive throughout the environment, but unlike aquatic and terrestrial microplastics, airborne microplastics have received less scientific attention. This study is the first of its kind to explicitly examine microplastics in the indoor and outdoor air (PM2.5) samples collected using active air samplers in Islamabad, Pakistan. The suspected synthetic particles were analyzed using ATR-FTIR, μ-Raman and SEM-EDX to categorize them based on their morphological characteristics, polymeric composition, and elemental makeup. Microplastics were found in all indoor and outdoor air samples, with indoor air samples (4.34 ± 1.93 items/m3) being significantly more contaminated than outdoor air samples (0.93 ± 0.32 items/m3) (P < 0.001). Among all the indoor air samples, samples taken from classroom (6.12 ± 0.51 items/m3) were more contaminated than samples taken from hallway (4.94 ± 0.78 items/m3) and laboratory (1.96 ± 0.44 items/m3). Fibers were found to be the prevalent shape type in indoor and outdoor airborne microplastics followed by fragments. Transparent- and black colored microplastic particles were predominant in both indoor and outdoor air samples. According to ATR-FTIR analysis, polyethylene terephthalate (PET), polyethylene (PE), polypropylene (PP), and polystyrene (PS) were the most prevalent polymer types in both indoor and outdoor environments. Results from μ-Raman analysis corroborated the presence of the polymers identified by ATR-FTIR. Morphological analysis of particles by SEM indicated signs of weathering on particles' surface i.e., grooves, breaks, shredded edges, pits etc. SEM-EDX of randomly chosen particles unraveled the presence of C and O as core elements, along with the presence of heavy metals at some spots due to foreign material adhering to their surface. Correlation analysis of environmental factors i.e., PM2.5, relative humidity, temperature, and wind speed with MPs abundance revealed non-significant relationships. The findings of this study call for further research on airborne MPs to better comprehend their dispersion, toxicity, interactions with other air pollutants, and attributable health risks.

A bibliometric analysis of global research hotspots and progress on microplastics in soil‒plant systems

Plastic pollution has become a global and persistent challenge, posing threats to ecosystems and organisms. In recent years, there has been a rapid increase in scientific research focused on understanding microplastics in the soil‒plant system. This surge is primarily driven by the direct impact of microplastics on agricultural productivity and their association with human activities. In this study, we conducted a comprehensive bibliometric analysis to provide an overview of the current research on microplastics in soil‒plant systems. We systematically analysed 192 articles and observed a significant rise in research interests since 2017. Notably, China has emerged as a leading contributor in terms of published papers, closely followed by Germany and the Netherlands. Through co-authorship network analysis, we identified 634 different institutions that participated in publishing papers in this field, with the Chinese Academy of Sciences having the most collaborations. In the co-occurrence keyword network, we identified four clusters focusing on the diversity of microplastics within the agroecosystem, transportation, and quantification of microplastics in soil, analysis of plastic contamination type and impact, and investigation of microplastic phytotoxicity. Furthermore, we identified ten research priorities, categorized into the effects of microplastics in "soil" and "plant". The research hotspots were found to be the effect of microplastics on soil physicochemical properties and the synergistic phytotoxicity of microplastics with other pollutants. Overall, this bibliometric analysis holds significant value, serving as an important reference point and offering valuable suggestions for future researchers in this rapidly advancing field.

Uptake and transport of micro/nanoplastics in terrestrial plants: Detection, mechanisms, and influencing factors

The pervasive dispersion of micro/nanoplastics in various environmental matrices has raised concerns regarding their potential intrusion into terrestrial ecosystems and, notably, plants. In this comprehensive review, we focus on the interaction between these minute plastic particles and plants. We delve into the current methodologies available for detecting micro/nanoplastics in plant tissues, assess the accumulation and distribution of these particles within roots, stems, and leaves, and elucidate the specific uptake and transport mechanisms, including endocytosis, apoplastic transport, crack-entry mode, and stomatal entry. Moreover, uptake and transport of micro/nanoplastics are complex processes influenced by multiple factors, including particle size, surface charge, mechanical properties, and physiological characteristics of plants, as well as external environmental conditions. In conclusion, this review paper provided valuable insights into the current understanding of these mechanisms, highlighting the complexity of the processes and the multitude of factors that can influence them. Further research in this area is warranted to fully comprehend the fate of micro/nanoplastics in plants and their implications for environmental sustainability.

Microplastic pollution in terrestrial ecosystems: Global implications and sustainable solutions

Microplastic (MPs) pollution has become a global environmental concern with significant impacts on ecosystems and human health. Although MPs have been widely detected in aquatic environments, their presence in terrestrial ecosystems remains largely unexplored. This review examines the multifaceted issues of MPs pollution in terrestrial ecosystem, covering various aspects from additives in plastics to global legislation and sustainable solutions. The study explores the widespread distribution of MPs worldwide and their potential antagonistic interactions with co-occurring contaminants, emphasizing the need for a holistic understanding of their environmental implications. The influence of MPs on soil and plants is discussed, shedding light on the potential consequences for terrestrial ecosystems and agricultural productivity. The aging mechanisms of MPs, including photo and thermal aging, are elucidated, along with the factors influencing their aging process. Furthermore, the review provides an overview of global legislation addressing plastic waste, including bans on specific plastic items and levies on single-use plastics. Sustainable solutions for MPs pollution are proposed, encompassing upstream approaches such as bioplastics, improved waste management practices, and wastewater treatment technologies, as well as downstream methods like physical and biological removal of MPs. The importance of international collaboration, comprehensive legislation, and global agreements is underscored as crucial in tackling this pervasive environmental challenge. This review may serve as a valuable resource for researchers, policymakers, and stakeholders, providing a comprehensive assessment of the environmental impact and potential risks associated with MPs.

Microplastics and potentially toxic elements: A review of interactions, fate and bioavailability in the environment

In recent years, microplastics (MPs) have obtained growing public concern due to widespread distribution and harmful impacts. Their distinctive features including porous structure, small size, as well as large specific surface area render MPs to be carriers for transporting other pollutants in the environment, especially potentially toxic elements (PTEs). Considering the hot topic of MPs, it is of great significance to comb the reported literature on environmental behaviors of co-occurrence of MPs and PTEs, and systematically discuss their co-mobility, transportation and biotoxicity to different living organisms in diverse environmental media. Therefore, the aim of this work is to systematically review and summarize recent advances on interactions and co-toxicity of MPs and PTEs, in order to provide in-depth understanding on the transport behaviors as well as environmental impacts. Electrostatic attraction and surface complexation mainly govern the interactions between MPs and PTEs, which are subordinated by other physical sorption processes. Besides, the adsorption behaviors are mainly determined by physicochemical properties regarding to different MPs types and various condition factors (e.g., ageing and PTEs concentrations, presence of substances). Generally speaking, recently published papers make a great progress in elucidating the mechanisms, impact factors, as well as thermodynamic and kinetic studies. Bioavailability and bioaccumulation by plant, microbes, and other organisms in both aquatic and terrestrial environment have also been under investigation. This review will shed novel perspectives on future research to meet the sustainable development goals, and obtain critical insights on revealing comprehensive mechanisms. It is crucial to promote efficient approaches on environmental quality improvement as well as management strategies towards the challenge of MPs-PTEs.

Uncovering the intricate relationship between plant nutrients and microplastics in agroecosystems

Recent scientific and media focus has increased on the impact of microplastics (MPs) on terrestrial and soil ecosystems. However, the interactions between MPs with macronutrients and micronutrients and their potential consequences for the agroecosystem are not well understood. Wheat (Triticum aestivum) is a staple food grown globally and has special importance for nations economies. Different elements can cause dangerous outcomes for wheat quality and production yield. In this study, batch adsorption experiments were done using 1 g of polyethylene tetra phthalate MP particles (PET-MPs) in varying concentrations of thirteen elements. The adsorption data were fitted by two common adsorption models (Langmuir and Freundlich). The effect of pH on the speciation of elements in aqueous solutions was investigated. The non-invasive characterization methods indicate the importance of O- and H-containing groups as the main component of selected MPs in controlling the adsorption of the elements ions. In the current study, adsorption and potential transport of the adsorbed macronutrients (K and Na) and micronutrients (Ni, Co, Cu, Al, Ba, Se, Fe, As, B, V and Ag) which include some beneficial (Na, Se, V), and non-essential or toxic elements (Al, As, Ag, Ba) onto MPs to the simulated roots of wheat were evaluated. The maximum sorption capacities of K+> Ni+2> Na+ > Co2+> Cu2+>Al+3 >Ba+2 >Se4+>Fe2+ >As5+ >B3+ >V5+> Ag + on PET-MPs at pH 5.8 and 25 ± 1 °C were 290.6 > 0.52> 0.51 > 0.20> 0.10 > 0.051> 0.024 > 0.003> 0.003 > 0.0015> 5.05 × 10-4> 1.7 × 10-4>3.7 × 10-6 mg g-1, respectively. The results highlight the importance of PET-MPs in controlling element adsorption in the rhizosphere. Our observations provide a good start for understanding the adsorption of multiple elements from the soil rhizosphere zone by PET-MPs.

Extractability and phytotoxicity of heavy metals and essential elements from plastics in soil solutions and root exudates

Plastic waste is increasing and is a serious environmental problem. Among the threats associated with plastics is the release of contaminants into the environment. This study aimed to evaluate the efficiency of metals release from plastics (low-density polyethylene (LDPE), polyethylene terephthalate (PET), and polypropylene (PP)) as affected by different soil solution types, artificial root exudates, and distilled water. The extent of metal release varied depending on the type of solution and plastic used. Metals were leached most effectively from plastics in soil solutions, followed by root exudates, and least effectively by distilled water. LDPE released the highest concentrations of Cu and Na into solution, PP released the greatest amount of Fe, and PET released the most Cr. The efficiencies of Mg and Zn release from the plastics (PP and PET) varied by solution type. Among the plastics studied, LDPE exhibited the strongest ability to adsorb metals, such as Fe, Cr, Mg, and Zn from soil solutions. The amount of metal released from the plastics was also dependent on pH, dissolved organic carbon (DOC) concentrations, and the electrical conductivity (EC) of the solutions. Moreover, plastic extracts were found to have negative effects on germination and growth in Lepidium sativum.

Microplastics reduced bioavailability and altered toxicity of phenanthrene to maize (Zea mays L.) through modulating rhizosphere microbial community and maize growth

Due to its large specific surface area and great hydrophobicity, microplastics can adsorb polycyclic aromatic hydrocarbons (PAHs), affecting the bioavailability and the toxicity of PAHs to plants. This study aimed to evaluate the effects of D550 and D250 (with diameters of 550 μm and 250 μm) microplastics on phenanthrene (PHE) removal from soil and PHE accumulation in maize (Zea mays L.). Moreover, the effects of microplastics on rhizosphere microbial community of maize grown in PHE-contaminated soil would also be determined. The results showed that D550 and D250 microplastics decreased the removal of PHE from soil by 6.5% and 2.7% and significantly reduced the accumulation of PHE in maize leaves by 64.9% and 88.5%. Interestingly, D550 microplastics promoted the growth of maize and enhanced the activities of soil protease and alkaline phosphatase, while D250 microplastics significantly inhibited the growth of maize and decreased the activities of soil invertase, alkaline phosphatase and catalase, in comparison with PHE treatment. In addition, microplastics changed the rhizosphere soil microbial community and reduced the relative abundance of PAHs degrading bacteria (Pseudomonas, Massilia, Proteobacteria), which might further inhibit the removal of PHE from soil. This study provided a new perspective for evaluating the role of microplastics on the bioavailability of PHE to plants and revealing the combined toxicity of microplastics and PHE to soil microcosm and plant growth.

The threat of micro/nanoplastic to aquatic plants: current knowledge, gaps, and future perspectives

Plastics have been recognized as an emerging pollutant and have raised global concerns due to their widespread distribution in the environment and potential harm to living systems. However, research on the threat of micro/nanoplastics (MPs/NPs) to the unique group of aquatic plants is far behind, necessitating a comprehensive review to summarize current research progress and identify future research needs. This review explores the sources and distribution patterns of MPs/NPs in aquatic environments, highlighting their uptake by aquatic plants through roots and leaves, and subsequent translocation via the vascular system facilitated by the transpiration stream. Exposure to MPs/NPs elicits diverse effects on the growth, physiology, and ecological interactions of aquatic plants, with variations influenced by plastic properties, plant species, and experimental conditions. Furthermore, the presence of MPs/NPs can impact the toxicity and bioavailability of other associated toxicants to aquatic plants. This review shows critical knowledge gaps and emphasizes the need for future research to bridge the current understanding of the limitations and challenges posed by MPs/NPs in aquatic ecosystems.

Sorption behaviour of tebuconazole on microplastics: kinetics, isotherms and influencing factors

Microplastics (MPs) and pesticides are two classes of environmental pollutants and have become global challenges. MPs could adsorb substantial environmental pollutants, which may affect their transportation, distribution and cause combination toxicity. Therefore, the study of sorption properties and mechanisms is the basis of the ecological risk assessment of co-exposure of pesticides and MPs. In this research, typical triazole fungicide tebuconazole (TEB) is selected as a model pollutant, and its sorption behaviour was investigated by kinetic and isotherm models. Meanwhile, a series of environmental influencing factors, like pH, salinity, and metals were conducted. Results showed that the sorption of TEB on MPs could reach equilibrium at 24 h, and the sorption capacity followed the order of PA (polyamide) > PS (polystyrene) > PP (polypropylene). The pseudo-second-order model was the most appropriate model to describe kinetic data, and the Freundlich model was well fit for PA sorption isotherms, in contrast the Langmuir model is better for PP and PS. Additionally, the pH of the solution, salinity, and metals have an important effect on sorption. Combined with Fourier Transform Infrared Spectroscopy and environmental influencing factors, the sorption mechanisms were mainly electrostatic interaction and hydrogen bond for PA and PP, and hydrophobic force, intermolecular force, and electrostatic force for PS, respectively.

Co-exposure of microplastics and heavy metals in the marine environment and remediation techniques: a comprehensive review

Microplastics (MPs) and heavy metals are significant pollutants in the marine environment, necessitating effective remediation strategies to prevent their release into the sea through sewage and industrial effluent. This comprehensive review explores the current understanding of the co-exposure of MPs and heavy metal-enriched MPs, highlighting the need for effective remediation methods. Various mechanisms, including surface ion complexation, hydrogen bonding, and electrostatic forces, contribute to the adsorption of heavy metals onto MPs, with factors like surface area and environmental exposure duration playing crucial roles. Additionally, biofilm formation on MPs alters their chemical properties, influencing metal adsorption behaviors. Different thermodynamic models are used to explain the adsorption mechanisms of heavy metals on MPs. The adsorption process is influenced by various factors, including the morphological characteristics of MPs, their adsorption capacity, and environmental conditions. Additionally, the desorption of heavy metals from MPs has implications for their bioavailability and poses risks to marine organisms, emphasizing the importance of source reduction and remedial measures. Hybrid approaches that combine both conventional and modern technologies show promise for the efficient removal of MPs and heavy metals from marine environments. This review identifies critical gaps in existing research that should be addressed in future studies including standardized sampling methods to ensure accurate data, further investigation into the specific interactions between MPs and metals, and the development of hybrid technologies at an industrial scale. Overall, this review sheds light on the adsorption and desorption mechanisms of heavy metal-enriched MPs, underscoring the necessity of implementing effective remediation strategies.

Effects of plastic contamination on carbon fluxes in a subtropical coastal wetland of East China

Coastal wetlands are recognized as carbon sinks that play an important role in mitigating global climate change because of the strong carbon uptake by vegetation and high carbon sequestration in the soil. Over the last few decades, plastic waste pollution in coastal zones has become increasingly serious owing to high-intensity anthropogenic activities. However, the influence of plastic waste (including foam waste) accumulation in coastal wetlands on carbon flux remains unclear. In the Yangtze Estuary, we investigated the variabilities of vegetation growth, carbon dioxide (CO2) and methane (CH4) fluxes, and soil properties in a clean Phragmites australis marsh and mudflat and a plastic-polluted marsh during summer and autumn. The clean marsh showed a strong CO2 uptake capacity (a carbon sink), and the clean mudflat showed a weak CO2 sink during the measurement period. However, polluted marshes are a significant source of CO2 emissions. Regardless of the season, the gross primary production and vegetation biomass of the polluted marshes were on average 9.5 and 1.1 times lower than those in the clean marshes, respectively. Ecosystem respiration and CH4 emissions in polluted marshes were significantly higher than those in clean marshes and mudflats. Generally, the soil bulk density and salinity in polluted marshes were lower, whereas the median particle size was higher at the polluted sites than at the clean sites. Increased soil porosity and decreased salinity may favor CO2 and CH4 emissions through gas diffusion pathways and microbiological behavior. Moreover, the concentrations of heavy metals in the soil of plastic-polluted marshes were 1.24-1.49 times higher than those in the clean marshes, which probably limited vegetation growth and CO2 uptake. Our study highlights the adverse effects of plastic pollution on the carbon sink functions of coastal ecosystems, which should receive global attention in coastal environmental management.

Plastic in the Environment: A Modern Type of Abiotic Stress for Plant Physiology

In recent years, plastic pollution has become a growing environmental concern: more than 350 million tons of plastic material are produced annually. Although many efforts have been made to recycle waste, a significant proportion of these plastics contaminate and accumulate in the environment. A central point in plastic pollution is demonstrated by the evidence that plastic objects gradually and continuously split up into smaller pieces, thus producing subtle and invisible pollution caused by microplastics (MP) and nanoplastics (NP). The small dimensions of these particles allow for the diffusion of these contaminants in farmlands, forest, freshwater, and oceans worldwide, posing serious menaces to human, animal, and plant health. The uptake of MPs and NPs into plant cells seriously affects plant growth, development, and photosynthesis, finally limiting crop yields and endangering natural environmental biodiversity. Furthermore, nano- and microplastics-once adsorbed by plants-can easily enter the food chain, being highly toxic to animals and humans. This review addresses the impacts of MP and NP particles on plants in the terrestrial environment. In particular, we provide an overview here of the detrimental effects of photosynthetic injuries, oxidative stress, ROS production, and protein damage triggered by MN and NP in higher plants and, more specifically, in crops. The possible damage at the physiological and environmental levels is discussed.

Naturally aged polylactic acid microplastics stunted pakchoi (Brassica rapa subsp. chinensis) growth with cadmium in soil

Biodegradable microplastics (BMPs) and cadmium (Cd) are posing threats to agro-systems especially to plants and current studies mostly used virgin BMPs to explore their ecological effects. However, effects of naturally aged BMPs and their combined effects with Cd on pakchoi are yet to be unraveled. Therefore, this study incubated naturally aged polylactic acid (PLA) MPs through soil aging process and investigated the single and combined effects of Cd and PLA MPs (virgin and aged) on pakchoi (Brassica rapa subsp. chinensis) morphology, antioxidant systems and soil microbial activities. Our results found that after being deposited in soil for six months, aged PLA (PLAa) MPs formed with a fractured surface, demonstrating more detrimental effects on pakchoi than virgin ones. PLA/PLAa MPs and Cd stunted pakchoi growth, caused oxidative stress and altered the biophysical environment in soil, separately. Moreover, co-existence of PLA/PLAa MPs and Cd caused greater damages to pakchoi than applied alone. The co-presence of PLAa MPs and Cd inhibited pakchoi biomass accumulation rate by 92.2 % compared with the no-addition group. The results unraveled here emphasized BMPs, especially aged BMPs, could trigger negative effects on agro-systems with heavy metals. These findings will give reference to future holistic assessments of BMPs' ecological effects.

The bioaccessibility of adsorped heavy metals on biofilm-coated microplastics and their implication for the progression of neurodegenerative diseases

Microplastic (MP) tiny fragments (< 5 mm) of conventional and specialized industrial polymers are persistent and ubiquitous in both aquatic and terrestrial ecosystem. Breathing, ingestion, consumption of food stuffs, potable water, and skin are possible routes of MP exposure that pose potential human health risk. Various microorganisms including bacteria, cyanobacteria, and microalgae rapidly colonized on MP surfaces which initiate biofilm formation. It gradually changed the MP surface chemistry and polymer properties that attract environmental metals. Physicochemical and environmental parameters like polymer type, dissolved organic matter (DOM), pH, salinity, ion concentrations, and microbial community compositions regulate metal adsorption on MP biofilm surface. A set of highly conserved proteins tightly regulates metal uptake, subcellular distribution, storage, and transport to maintain cellular homeostasis. Exposure of metal-MP biofilm can disrupt that cellular homeostasis to induce toxicities. Imbalances in metal concentrations therefore led to neuronal network dysfunction, ROS, mitochondrial damage in diseases like Alzheimer's disease (AD), Parkinson's disease (PD), and Prion disorder. This review focuses on the biofilm development on MP surfaces, factors controlling the growth of MP biofilm which triggered metal accumulation to induce neurotoxicological consequences in human body and stategies to reestablish the homeostasis. Thus, the present study gives a new approach on the health risks of heavy metals associated with MP biofilm in which biofilms trigger metal accumulation and MPs serve as a vector for those accumulated metals causing metal dysbiosis in human body.

Effect of polylactic acid microplastics and lead on the growth and physiological characteristics of buckwheat

Microplastics (MPs) and heavy metals are common, often co-existing pollutants, that threaten crop growth and productivity worldwide. We analysed the adsorption of lead ions (Pb2+) to polylactic acid MPs (PLA-MPs) and their single factor and combined effects on tartary buckwheat (Fagopyrum tataricum L. Gaertn.) in hydroponics by measuring changes in the growth characteristics, antioxidant enzyme activities and Pb2+ uptake of buckwheat in response to PLA-MPs and Pb2+. PLA-MPs adsorbed Pb2+, and the better fitting second-order adsorption model implied that Pb2+ was adsorbed by chemisorption. However, the similar Pb2+ contents in the plants treated with Pb2+ only and those treated with the combined PLA-MPs-Pb2+ suggested that the adsorption played no role in the uptake of Pb2+. Low concentrations of PLA-MPs promoted shoot length. At high concentrations of both PLA-MPs and Pb2+, buckwheat growth was inhibited, and leaf peroxidase (POD), superoxide dismutase (SOD) and catalase (CAT) activities and malondialdehyde (MDA) contents were higher than in the control. No significant differences were observed in seedling growth between exposure to Pb2+ only and combined exposure to PLA-MPs with Pb2+, implying that PLA-MPs did not increase the toxicity of Pb2+ at macroscopic level. POD activity was higher and chlorophyll content was lower with PLA-MPs in the low Pb2+ dose treatments, suggesting that PLA-MPs may increase the toxicity of naturally occurring Pb2+. However, the conclusions must be verified in controlled experiments in natural soil conditions over the whole cultivation period of buckwheat.

Toxicological Profile of Polyethylene Terephthalate (PET) Microplastic in Ingested Drosophila melanogaster (Oregon R+) and Its Adverse Effect on Behavior and Development

Microplastics are readily available in the natural environment. Due to the pervasiveness of microplastic pollution, its effects on living organisms necessitate further investigation. The size, time of exposure, and amount of microplastic particles appear to be the most essential factor in determining their toxicological effects, either organismal or sub-organismal. For our research work, we preferred to work on a terrestrial model organism Drosophila melanogaster (Oregon R+). Therefore, in the present study, we characterized 2-100 µm size PET microplastic and confirmed its accumulation in Drosophila, which allowed us to proceed further in our research work. At larger dosages, research on locomotory activities such as climbing, jumping, and crawling indicated a decline in physiological and neuromuscular functions. Our studies also determined retarded development in flies and decreased survival rate in female flies after exposure to the highest concentration of microplastics. These experimental findings provide insight into the possible potential neurotoxic effects of microplastics and their detrimental effects on the development and growth of flies.

Effects of microplastics and cadmium on growth rate, photosynthetic pigment content and antioxidant enzymes of duckweed (Lemma minor)

Cadmium (Cd) and polyethylene (PE) seriously contaminate the aquatic environment and threaten human health. Many studies have reported the toxic effects of Cd and PE on plants, whereas few have reported the combined contamination of these two pollutants. In this study, duckweed (Lemma minor) was used as an indicator to explore the effect of PE microplastics (PE-MPs) at concentrations of 10, 50, 100, 200, and 500 mg/L on tolerance to 1 mg/L Cd. The results showed that different concentrations of PE-MPs inhibited the growth rate and chlorophyll content of duckweed to different degrees, both of which were minimal at 50 mg/L PE-MPs, 0.11 g/d, and 0.32 mg/g, respectively. The highest Cd enrichment (7.77 mg/kg) and bioaccumulation factors (94.22) of duckweed were detected when Cd was co-exposed with 50 mg/L of PE-MPs. Catalase and peroxidase activity first decreased and then increased with increasing PE-MPs concentrations, showing "hormesis effects", with minimum values of 11.47 U/g and 196.00 U/g, respectively. With increasing concentrations of PE-MPs, the effect on superoxide dismutase activity increased and then declined, peaking at 162.05 U/g, and displaying an "inverted V" trend. The amount of malondialdehyde rose with different PE-MPs concentrations. This research lay a foundation for using duckweed to purify water contaminated with MPs and heavy metals.

Microplastic stress in plants: effects on plant growth and their remediations

Microplastic (MP) pollution is becoming a global problem due to the resilience, long-term persistence, and robustness of MPs in different ecosystems. In terrestrial ecosystems, plants are exposed to MP stress, thereby affecting overall plant growth and development. This review article has critically analyzed the effects of MP stress in plants. We found that MP stress-induced reduction in plant physical growth is accompanied by two complementary effects: (i) blockage of pores in seed coat or roots to alter water and nutrient uptake, and (ii) induction of drought due to increased soil cracking effects of MPs. Nonetheless, the reduction in physiological growth under MP stress is accompanied by four complementary effects: (i) excessive production of ROS, (ii) alteration in leaf and root ionome, (iii) impaired hormonal regulation, and (iv) decline in chlorophyll and photosynthesis. Considering that, we suggested that targeting the redox regulatory mechanisms could be beneficial in improving tolerance to MPs in plants; however, antioxidant activities are highly dependent on plant species, plant tissue, MP type, and MP dose. MP stress also indirectly reduces plant growth by altering soil productivity. However, MP-induced negative effects vary due to the presence of different surface functional groups and particle sizes. In the end, we suggested the utilization of agronomic approaches, including the application of growth regulators, biochar, and replacing plastic mulch with crop residues, crop diversification, and biological degradation, to ameliorate the effects of MP stress in plants. The efficiency of these methods is also MP-type-specific and dose-dependent.

Analyzing the impacts of cadmium alone and in co-existence with polypropylene microplastics on wheat growth

Heavy metals typically coexist with microplastics (MPs) in terrestrial ecosystems. Yet, little is known about how the co-existence of heavy metals and MPs affect crops. Therefore, this study aimed to evaluate the impact of cadmium (Cd; 40 mg/L) alone and its co-existence with polypropylene (PP)-MPs (50 and 100 µm) on seed germination, root and shoot growth, seedling dry weight (DW), and antioxidant enzyme activities of wheat. The study demonstrated that the germination rate of wheat did not vary significantly across treatment groups. Yet, the inhibitory impact on wheat seed germination was strengthened under the co-existence of Cd and PP-MPs, as the effect of a single treatment on seed germination was non-significant. The germination index and mean germination time of wheat seeds were not affected by single or combined toxicity of Cd and PP-MPs. In contrast, Cd and PP-MPs showed synergistic effects on germination energy. Wheat root and shoot length were impeded by Cd alone and in combination with PP-MPs treatments. The DW of wheat seedlings showed significant change across treatment groups until the third day, but on the seventh day, marginal differences were observed. For example, on third day, the DW of the Cd treatment group increased by 6.9% compared to CK, whereas the DW of the 100 µm PP-MPs+Cd treatment group decreased by 8.4% compared to CK. The co-occurrence of Cd and PP-MPs indicated that 50 μm PP-MPs+Cd had an antagonistic impact on wheat seedling growth, whereas 100 μm PP-MPs+Cd had a synergistic impact due to the larger size of PP-MPs. The antioxidant enzyme system of wheat seeds and seedlings increased under single Cd pollution, while the activities of superoxide dismutase, catalase, and peroxidase were decreased under combined pollution. Our study found that Cd adversely affects wheat germination and growth, while the co-existence of Cd and PP-MPs have antagonistic and synergistic effects depending on the size of the PP-MPs.

Joint cadmium and polypropylene microparticle action in cadmium tolerant model insect

Microplastic enlisted as a contaminant of emerging concerns in polluted environments interact with "traditional" contaminants such as metals, causing, among others, their increased accumulation in the body. Harmful effects depend on the exposed animals' possible preadaptation and/or cross-tolerance. The project aimed to assess the role of this phenomenon in the limited toxicity of polypropylene fibers (PPf) in 0%, 0.02%, 0.06, 0.18%, 0.54%, and 1.6% of Cd-supplemented food of larvae of Spodoptera exigua multigenerationally selected to cadmium tolerance. The activity of 20 digestive enzymes (API-ZYM test), defensins, and heat shock proteins, HSP70 levels in the exposed groups were used as biomarkers. PPfs caused the increase of Cd accumulation in the body, while intake of polypropylene microfibers did not change the biomarker levels. Moreover, multigenerational Cd pre-exposure, due to increased tolerance of Cd and, possibly, cross-tolerance, prepares the insects for an additional stressor (PPf) alone and in interaction with cadmium.

Specific response of soil properties to microplastics pollution: A review

The soil environment is a critical component of the global ecosystem and is essential for nutrient cycling and energy flow. Various physical, chemical, and biological processes occur in the soil and are affected by environmental factors. Soil is vulnerable to pollutants, especially emerging pollutants, such as microplastics (MPs). MPs pollution has become a significant environmental problem, and its harm to human health and the environment cannot be underestimated. However, most studies on MPs pollution have focused on marine ecosystems, estuaries, lakes, rivers, and other aquatic environments, whereas few considered the effects and hazards of MPs pollution of the soil, especially the responses of different environmental factors to MPs. In addition, when many MPs pollutants produced by agricultural activities (mulching film, organic fertilizer) and atmospheric sedimentation enter the soil environment, it will cause changes in soil pH, organic matter composition, microbial community, enzyme activity, animals and plants and other environmental factors. However, due to the complex and changeable soil environment, the heterogeneity is very strong. The changes of environmental factors may react on the migration, transformation and degradation of MPs, and there are synergistic or antagonistic interactions among different factors. Therefore, it is very important to analyze the specific effects of MPs pollution on soil properties to clarify the environmental behavior and effects of MPs. This review focuses on the source, formation, and influencing factors of MPs pollution in soil and summarizes its effect and influence degree on various soil environmental factors. The results provide research suggestions and theoretical support for preventing or controlling MPs soil pollution.

An unrecognized entry pathway of submicrometre plastics into crop root: The split of hole in protective layer

Threats to food safety caused by the continuous accumulation of plastic particles in the terrestrial environment is currently a worldwide concern. To date, descriptions of how plastic particles pass the external biological barrier of crop root have been vague. Here, we demonstrated that submicrometre polystyrene particles passed unimpededly the external biological barrier of maize through the split of holes in the protective layer. We identified plastic particles induced the apical epidermal cells of root tips become round, thereby expanding the intercellular space. It further pulled apart the protective layer between the epidermal cells, and eventually formed the entry pathway for plastic particles. The enhancement of oxidative stress level induced by plastic particles was the main reason for the deformation of the apical epidermal cells (increased roundness values: 15.5%), comparing to the control. Our findings further indicated that the presence of cadmium was conducive to the "holes" formation. Our results highlighted the critical insights into the fracture mechanisms of plastic particles for the external biological barriers of crop roots, providing a strong incentive to access the risk of plastic particles in agriculture security.

Effect of polyethylene, polyamide, and polylactic acid microplastics on Cr accumulation and toxicity to cucumber (Cucumis sativus L.) in hydroponics

Microplastics (MPs) in farmland soil may affect the environmental fate and toxicity of heavy metals; however, how non-biodegradable and biodegradable MPs change the accumulation and phytotoxicity of Cr(VI) to the plants is still unknown. In this study, we explored the impacts of Cr(VI) concentrations (0, 20, 50, 100, 200, and 500 μmol/L), MP types (polyethylene (PE), polyamide (PA), and polylactic acid (PLA)), sizes (13, 48, and 500 µm), and concentrations (40, 200, and 1000 mg/L) on the Cr accumulation and toxicity to cucumber (Cucumis sativus L.) under hydroponic conditions for 14 days. The results show that the presence of PE-MPs promoted the Cr accumulation in root by 8-39.8%. However, PA-MPs inhibited the Cr accumulation in the whole plant under less than 100 μmol/L Cr(VI). Notably, 1000 mg/L PA-MPs significantly reduced Cr accumulation in root and stem by 44.70% and 48.20%, respectively. Moreover, PE-MPs and PLA-MPs reduced the chlorophyll content and slowed down the growth of seedlings, while PA-MPs were beneficial to the growth of cucumber under 50-500 μmol/L Cr(VI) treatments, increasing the biomass by 20.99-189.99%. Furthermore, PE-MPs enhanced the content of MDA, especially under 500 μmol/L Cr(VI) concentration by 27.39%; however, the addition of PA-MPs and PLA-MPs slightly enhanced the enzyme activities including superoxide dismutase (SOD), peroxidase (POD) and catalase (CAT). Significantly, 1000 mg/L PA-MPs promoted biomass and reduced MDA content compared the control due to their high Cr(VI) adsorption efficiency. Thus, MP type, especially PE-MPs, mainly determined the Cr accumulation and phytotoxicity, which was attributed to the various adsorption capacities of MPs to Cr(VI).

Interactive effects of polystyrene microplastics and Pb on growth and phytochemicals in mung bean (Vigna radiata L.)

Interaction of different pollutants can aggravate hazards to biotic components in agroecosystems. Microplastics (MPs) are especially needed to be focused on because of their increasing use in life around the globe. We investigated the interactive impacts of polystyrene microplastics (PS-MP) and lead (Pb) on mung bean (Vigna radiata L.). Toxicity of MPs and Pb directly impeded V. radiata attributes. In combination i.e., M2P2 (40 µM Pb + 4.0 mg L-1 MPs) predominantly reduced the shoot root fresh and dry weights. \ Pb and PS-MP impaired the Rubisco activity and chlorophyll contents. The dose dependent relationship (M2P2) discomposed indole 3-acetic acid by 59.02%. Individual treatments P2 (40 µM Pb) and M2 (4.0 mg L^-1 MPs) respectively instigated a decline (44.07% and 27.12%) in IBA, while ABA was elevated. M2 significantly enhanced the contents of Alanine (Ala), Arginine (Arg), Proline (Pro), and glycine (Gly) by 64.11%, 63%, and 54% compared to control. Lysine (Lys) and Valine (Val) presented a converse relationship with other amino acids. Except for control, a gradual decline in yield parameters were observed in individual and combined applications of PS-MP. Proximate composition of carbohydrates, lipids and proteins also reflected a clear decrease in these compounds after combined application of Pb and MPs. Although, individual doses caused a decline in these compounds but effect of combined doses Pb and PS-MP was highly significant. Our results demonstrated the toxicity effect of Pb and MP in V. radiata attributes that is mainly linked with cumulative physiological and metabolic perturbations. These collective negative impacts of different doses of MPs and Pb on V. radiata would certainly pose serious implications for humans.

Polyethylene and polypropylene microplastics reduce chemisorption of cadmium in paddy soil and increase its bioaccessibility and bioavailability

Microplastics (MPs) usually coexist with heavy metals (HMs) in soil. MPs can influence HMs mobility and bioavailability, but the underlying mechanisms remain largely unexplored. Here, polyethylene and polypropylene MPs were selected to investigate their effects and mechanisms of sorption-desorption, bioaccessibility and bioavailability of cadmium (Cd) in paddy soil. Batch experiments indicated that MPs significantly reduced the Cd sorption in soil (p < 0.05). Accordingly, soil with the MPs had lower boundary diffusion constant of Cd (C₁= 0.847∼₁.020) and the Freundlich sorption constant (K_F = 0.444-0.616) than that without the MPs (C₁ = 0.894∼₁.035, K_F = 0.500-0.655). X-ray diffraction, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy analyses suggested that the MPs reduced Cd chemisorption, by covering the soil active sites and thus blocking complexation of Cd with active oxygen sites and interrupting the formation of CdCO₃ and Cd₃P₂ precipitates. Such effects of MPs enhanced about 1.2-1.5 times of Cd bioaccessibility and bioavailability in soil. Almost the same effects but different mechanisms of polyethylene and polypropylene MPs on Cd sorption in the soil indicated the complexity and pervasiveness of their effects. The findings provide new insights into impacts of MPs on the fate and risk of HMs in agricultural soil.

Microplastics may increase the environmental risks of Cd via promoting Cd uptake by plants: A meta-analysis

Microplastics (MPs) and cadmium (Cd) are widely distributed in soil ecosystems, posing a potential threat to agricultural production and human health. However, the coupled effects of MPs and Cd in soil-plant systems remain largely unknown, especially on a large scale. In this study, a meta-analysis was conducted to evaluate the influence of MPs on plant growth and Cd accumulation under the Cd contamination conditions. Our results showed that MPs had significantly negative effects on shoot biomass (a decrease of 11.8 %) and root biomass (a decrease of 8.79 %). MPs also significantly increased Cd accumulation in the shoots and roots by 14.6 % and 13.5 %, respectively, revealing that MPs promote plant Cd uptake. Notably, polyethylene displayed a stronger promoting effect (an increase of 29.4 %) on Cd accumulation among these MP types. MPs induced a significantly increase (9.75 %) in concentration of soil available Cd and a slight decrease in soil pH, which may be the main driver promoting plant Cd uptake. MP addition posed physiological toxicity risks to plants by inhibiting photosynthesis and enhancing oxidative damage, directly demonstrating that MPs in combination with Cd can pose synergetic toxicity risks to plants. We further noted that MPs altered microbial diversity, likely influencing Cd bioavailability in soil-plant systems. Overall, our study has important implications for the combined impacts of Cd and MPs on plants and provides new insights into developing guidelines for the sustainable use of MPs in agriculture.

The Minderoo-Monaco Commission on Plastics and Human Health

Background

Plastics have conveyed great benefits to humanity and made possible some of the most significant advances of modern civilization in fields as diverse as medicine, electronics, aerospace, construction, food packaging, and sports. It is now clear, however, that plastics are also responsible for significant harms to human health, the economy, and the earth's environment. These harms occur at every stage of the plastic life cycle, from extraction of the coal, oil, and gas that are its main feedstocks through to ultimate disposal into the environment. The extent of these harms not been systematically assessed, their magnitude not fully quantified, and their economic costs not comprehensively counted.

Goals

The goals of this Minderoo-Monaco Commission on Plastics and Human Health are to comprehensively examine plastics' impacts across their life cycle on: (1) human health and well-being; (2) the global environment, especially the ocean; (3) the economy; and (4) vulnerable populations-the poor, minorities, and the world's children. On the basis of this examination, the Commission offers science-based recommendations designed to support development of a Global Plastics Treaty, protect human health, and save lives.

Report Structure

This Commission report contains seven Sections. Following an Introduction, Section 2 presents a narrative review of the processes involved in plastic production, use, and disposal and notes the hazards to human health and the environment associated with each of these stages. Section 3 describes plastics' impacts on the ocean and notes the potential for plastic in the ocean to enter the marine food web and result in human exposure. Section 4 details plastics' impacts on human health. Section 5 presents a first-order estimate of plastics' health-related economic costs. Section 6 examines the intersection between plastic, social inequity, and environmental injustice. Section 7 presents the Commission's findings and recommendations.

Plastics

Plastics are complex, highly heterogeneous, synthetic chemical materials. Over 98% of plastics are produced from fossil carbon- coal, oil and gas. Plastics are comprised of a carbon-based polymer backbone and thousands of additional chemicals that are incorporated into polymers to convey specific properties such as color, flexibility, stability, water repellence, flame retardation, and ultraviolet resistance. Many of these added chemicals are highly toxic. They include carcinogens, neurotoxicants and endocrine disruptors such as phthalates, bisphenols, per- and poly-fluoroalkyl substances (PFAS), brominated flame retardants, and organophosphate flame retardants. They are integral components of plastic and are responsible for many of plastics' harms to human health and the environment.Global plastic production has increased almost exponentially since World War II, and in this time more than 8,300 megatons (Mt) of plastic have been manufactured. Annual production volume has grown from under 2 Mt in 1950 to 460 Mt in 2019, a 230-fold increase, and is on track to triple by 2060. More than half of all plastic ever made has been produced since 2002. Single-use plastics account for 35-40% of current plastic production and represent the most rapidly growing segment of plastic manufacture.Explosive recent growth in plastics production reflects a deliberate pivot by the integrated multinational fossil-carbon corporations that produce coal, oil and gas and that also manufacture plastics. These corporations are reducing their production of fossil fuels and increasing plastics manufacture. The two principal factors responsible for this pivot are decreasing global demand for carbon-based fuels due to increases in 'green' energy, and massive expansion of oil and gas production due to fracking.Plastic manufacture is energy-intensive and contributes significantly to climate change. At present, plastic production is responsible for an estimated 3.7% of global greenhouse gas emissions, more than the contribution of Brazil. This fraction is projected to increase to 4.5% by 2060 if current trends continue unchecked.

Plastic Life Cycle

The plastic life cycle has three phases: production, use, and disposal. In production, carbon feedstocks-coal, gas, and oil-are transformed through energy-intensive, catalytic processes into a vast array of products. Plastic use occurs in every aspect of modern life and results in widespread human exposure to the chemicals contained in plastic. Single-use plastics constitute the largest portion of current use, followed by synthetic fibers and construction.Plastic disposal is highly inefficient, with recovery and recycling rates below 10% globally. The result is that an estimated 22 Mt of plastic waste enters the environment each year, much of it single-use plastic and are added to the more than 6 gigatons of plastic waste that have accumulated since 1950. Strategies for disposal of plastic waste include controlled and uncontrolled landfilling, open burning, thermal conversion, and export. Vast quantities of plastic waste are exported each year from high-income to low-income countries, where it accumulates in landfills, pollutes air and water, degrades vital ecosystems, befouls beaches and estuaries, and harms human health-environmental injustice on a global scale. Plastic-laden e-waste is particularly problematic.

Environmental Findings

Plastics and plastic-associated chemicals are responsible for widespread pollution. They contaminate aquatic (marine and freshwater), terrestrial, and atmospheric environments globally. The ocean is the ultimate destination for much plastic, and plastics are found throughout the ocean, including coastal regions, the sea surface, the deep sea, and polar sea ice. Many plastics appear to resist breakdown in the ocean and could persist in the global environment for decades. Macro- and micro-plastic particles have been identified in hundreds of marine species in all major taxa, including species consumed by humans. Trophic transfer of microplastic particles and the chemicals within them has been demonstrated. Although microplastic particles themselves (>10 µm) appear not to undergo biomagnification, hydrophobic plastic-associated chemicals bioaccumulate in marine animals and biomagnify in marine food webs. The amounts and fates of smaller microplastic and nanoplastic particles (MNPs <10 µm) in aquatic environments are poorly understood, but the potential for harm is worrying given their mobility in biological systems. Adverse environmental impacts of plastic pollution occur at multiple levels from molecular and biochemical to population and ecosystem. MNP contamination of seafood results in direct, though not well quantified, human exposure to plastics and plastic-associated chemicals. Marine plastic pollution endangers the ocean ecosystems upon which all humanity depends for food, oxygen, livelihood, and well-being.

Human Health Findings

Coal miners, oil workers and gas field workers who extract fossil carbon feedstocks for plastic production suffer increased mortality from traumatic injury, coal workers' pneumoconiosis, silicosis, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer. Plastic production workers are at increased risk of leukemia, lymphoma, hepatic angiosarcoma, brain cancer, breast cancer, mesothelioma, neurotoxic injury, and decreased fertility. Workers producing plastic textiles die of bladder cancer, lung cancer, mesothelioma, and interstitial lung disease at increased rates. Plastic recycling workers have increased rates of cardiovascular disease, toxic metal poisoning, neuropathy, and lung cancer. Residents of "fenceline" communities adjacent to plastic production and waste disposal sites experience increased risks of premature birth, low birth weight, asthma, childhood leukemia, cardiovascular disease, chronic obstructive pulmonary disease, and lung cancer.During use and also in disposal, plastics release toxic chemicals including additives and residual monomers into the environment and into people. National biomonitoring surveys in the USA document population-wide exposures to these chemicals. Plastic additives disrupt endocrine function and increase risk for premature births, neurodevelopmental disorders, male reproductive birth defects, infertility, obesity, cardiovascular disease, renal disease, and cancers. Chemical-laden MNPs formed through the environmental degradation of plastic waste can enter living organisms, including humans. Emerging, albeit still incomplete evidence indicates that MNPs may cause toxicity due to their physical and toxicological effects as well as by acting as vectors that transport toxic chemicals and bacterial pathogens into tissues and cells.Infants in the womb and young children are two populations at particularly high risk of plastic-related health effects. Because of the exquisite sensitivity of early development to hazardous chemicals and children's unique patterns of exposure, plastic-associated exposures are linked to increased risks of prematurity, stillbirth, low birth weight, birth defects of the reproductive organs, neurodevelopmental impairment, impaired lung growth, and childhood cancer. Early-life exposures to plastic-associated chemicals also increase the risk of multiple non-communicable diseases later in life.

Economic Findings

Plastic's harms to human health result in significant economic costs. We estimate that in 2015 the health-related costs of plastic production exceeded $250 billion (2015 Int$) globally, and that in the USA alone the health costs of disease and disability caused by the plastic-associated chemicals PBDE, BPA and DEHP exceeded $920 billion (2015 Int$). Plastic production results in greenhouse gas (GHG) emissions equivalent to 1.96 gigatons of carbon dioxide (CO2e) annually. Using the US Environmental Protection Agency's (EPA) social cost of carbon metric, we estimate the annual costs of these GHG emissions to be $341 billion (2015 Int$).These costs, large as they are, almost certainly underestimate the full economic losses resulting from plastics' negative impacts on human health and the global environment. All of plastics' economic costs-and also its social costs-are externalized by the petrochemical and plastic manufacturing industry and are borne by citizens, taxpayers, and governments in countries around the world without compensation.

Social Justice Findings

The adverse effects of plastics and plastic pollution on human health, the economy and the environment are not evenly distributed. They disproportionately affect poor, disempowered, and marginalized populations such as workers, racial and ethnic minorities, "fenceline" communities, Indigenous groups, women, and children, all of whom had little to do with creating the current plastics crisis and lack the political influence or the resources to address it. Plastics' harmful impacts across its life cycle are most keenly felt in the Global South, in small island states, and in disenfranchised areas in the Global North. Social and environmental justice (SEJ) principles require reversal of these inequitable burdens to ensure that no group bears a disproportionate share of plastics' negative impacts and that those who benefit economically from plastic bear their fair share of its currently externalized costs.

Conclusions

It is now clear that current patterns of plastic production, use, and disposal are not sustainable and are responsible for significant harms to human health, the environment, and the economy as well as for deep societal injustices.The main driver of these worsening harms is an almost exponential and still accelerating increase in global plastic production. Plastics' harms are further magnified by low rates of recovery and recycling and by the long persistence of plastic waste in the environment.The thousands of chemicals in plastics-monomers, additives, processing agents, and non-intentionally added substances-include amongst their number known human carcinogens, endocrine disruptors, neurotoxicants, and persistent organic pollutants. These chemicals are responsible for many of plastics' known harms to human and planetary health. The chemicals leach out of plastics, enter the environment, cause pollution, and result in human exposure and disease. All efforts to reduce plastics' hazards must address the hazards of plastic-associated chemicals.

Recommendations

To protect human and planetary health, especially the health of vulnerable and at-risk populations, and put the world on track to end plastic pollution by 2040, this Commission supports urgent adoption by the world's nations of a strong and comprehensive Global Plastics Treaty in accord with the mandate set forth in the March 2022 resolution of the United Nations Environment Assembly (UNEA).International measures such as a Global Plastics Treaty are needed to curb plastic production and pollution, because the harms to human health and the environment caused by plastics, plastic-associated chemicals and plastic waste transcend national boundaries, are planetary in their scale, and have disproportionate impacts on the health and well-being of people in the world's poorest nations. Effective implementation of the Global Plastics Treaty will require that international action be coordinated and complemented by interventions at the national, regional, and local levels.This Commission urges that a cap on global plastic production with targets, timetables, and national contributions be a central provision of the Global Plastics Treaty. We recommend inclusion of the following additional provisions:The Treaty needs to extend beyond microplastics and marine litter to include all of the many thousands of chemicals incorporated into plastics.The Treaty needs to include a provision banning or severely restricting manufacture and use of unnecessary, avoidable, and problematic plastic items, especially single-use items such as manufactured plastic microbeads.The Treaty needs to include requirements on extended producer responsibility (EPR) that make fossil carbon producers, plastic producers, and the manufacturers of plastic products legally and financially responsible for the safety and end-of-life management of all the materials they produce and sell.The Treaty needs to mandate reductions in the chemical complexity of plastic products; health-protective standards for plastics and plastic additives; a requirement for use of sustainable non-toxic materials; full disclosure of all components; and traceability of components. International cooperation will be essential to implementing and enforcing these standards.The Treaty needs to include SEJ remedies at each stage of the plastic life cycle designed to fill gaps in community knowledge and advance both distributional and procedural equity.This Commission encourages inclusion in the Global Plastic Treaty of a provision calling for exploration of listing at least some plastic polymers as persistent organic pollutants (POPs) under the Stockholm Convention.This Commission encourages a strong interface between the Global Plastics Treaty and the Basel and London Conventions to enhance management of hazardous plastic waste and slow current massive exports of plastic waste into the world's least-developed countries.This Commission recommends the creation of a Permanent Science Policy Advisory Body to guide the Treaty's implementation. The main priorities of this Body would be to guide Member States and other stakeholders in evaluating which solutions are most effective in reducing plastic consumption, enhancing plastic waste recovery and recycling, and curbing the generation of plastic waste. This Body could also assess trade-offs among these solutions and evaluate safer alternatives to current plastics. It could monitor the transnational export of plastic waste. It could coordinate robust oceanic-, land-, and air-based MNP monitoring programs.This Commission recommends urgent investment by national governments in research into solutions to the global plastic crisis. This research will need to determine which solutions are most effective and cost-effective in the context of particular countries and assess the risks and benefits of proposed solutions. Oceanographic and environmental research is needed to better measure concentrations and impacts of plastics <10 µm and understand their distribution and fate in the global environment. Biomedical research is needed to elucidate the human health impacts of plastics, especially MNPs.

Summary

This Commission finds that plastics are both a boon to humanity and a stealth threat to human and planetary health. Plastics convey enormous benefits, but current linear patterns of plastic production, use, and disposal that pay little attention to sustainable design or safe materials and a near absence of recovery, reuse, and recycling are responsible for grave harms to health, widespread environmental damage, great economic costs, and deep societal injustices. These harms are rapidly worsening.While there remain gaps in knowledge about plastics' harms and uncertainties about their full magnitude, the evidence available today demonstrates unequivocally that these impacts are great and that they will increase in severity in the absence of urgent and effective intervention at global scale. Manufacture and use of essential plastics may continue. However, reckless increases in plastic production, and especially increases in the manufacture of an ever-increasing array of unnecessary single-use plastic products, need to be curbed.Global intervention against the plastic crisis is needed now because the costs of failure to act will be immense.

Microplastics (MPs) in marine food chains: Is it a food safety issue?

The enormous usage of plastic over the last seven decades has resulted in a massive quantity of plastic waste, much of it eventually breaking down into microplastic (MP) and nano plastic (NP). The MPs and NPs are regarded as emerging pollutants of serious concern. Both MPs and NPs can have a primary or secondary origin. Their ubiquitous presence and ability to sorb, desorb, and leach chemicals have raised concern over their presence in the aquatic environment and, particularly, the marine food chain. MPs and NPs are also considered vectors for pollutant transfer along with the marine food chain, and people who consume seafood have began significant concerns about the toxicity of seafood. The exact consequences and risk of MP exposure to marine foods are largely unknown and should be a priority research area. Although several studies have documented an effective clearance mechanism by defecation, significant aspect has been less emphasized for MPs and NPs and their capability to translocate in organs and clearance is not well established. The technological limitations to study these ultra-fine MPs are another challenge to be addressed. Therefore, this chapter discusses the recent findings of MPs in different marine food chains, their translocation and accumulations potential, MPs as a critical vector for pollutant transfer, toxicology impact, cycling in the marine environment and seafood safety. Besides, the concerns and challenges that are overshadowed by findings for the significance of MPs were covered.

Remediation plan of nano/microplastic toxicity in food

Microplastic pollution is causing a stir globally due to its persistent and ubiquitous nature. The scientific collaboration is diligently working on improved, effective, sustainable, and cleaner measures to control the nano/microplastic load in the environment especially wrecking the aquatic habitat. This chapter discusses the challenges encountered in nano/microplastic control and improved technologies like density separation, continuous flow centrifugation, oil extraction protocol, electrostatic separation to extract and quantify the same. Although it is still in the early stages of research, biobased control measures, like meal worms and microbes to degrade microplastics in the environment have been proven effective. Besides the control measures, practical alternatives to microplastics can be developed like core-shell powder, mineral powder, and biobased food packaging systems like edible films and coatings developed using various nanotechnological tools. Lastly, the existing and ideal stage of global regulations is compared, and key research areas are pinpointed. This holistic coverage would enable manufacturers and consumers to reconsider their production and purchase decisions for sustainable development goals.

Sources and hotspots of microplastics of the rivers ending to the southern Caspian Sea

The occurrence of microplastics (MPs) in beach sediments of the southern Caspian Sea was well documented, however, there are still many unknowns about the abundances and distributions of MPs in the rivers ending to the Caspian Sea. Here, bank sediments of 26 sites in the thirteen rivers were surveyed in two seasons. However, there was not any significant difference (p > 0.05) between the concentrations of MPs during the two seasons. MPs were detected in all samples with mean concentrations of 214.08 ± 14.35 MPs/kg. The most common size, shape, color, and polymer types of MPs were L < 300 μm, fragment/film, white/transparent, and polystyrene (PS), respectively. In all rivers, positive MP gradients from upstream to downstream were observed. Maximum concentrations of MPs were found in the downstream parts of Chalus, Haraz, and Safarud rivers. Recreational-tourism and fishing activities had significant positive relationships (p < 0.05) with concentration of MPs in the rivers.

Identification of reliable reference genes for gene expression studies in mouse models under microplastics stress

Microplastics (MPs) and nanoplastics (NPs) have been deemed to be newly emerged contaminants interfering with various physiological processes closely related with gene expression alteration. Reverse transcriptase quantitative real-time polymerase chain reaction (RT-qPCR) serves as a powerful tool to assess gene expression, however highly dependent on a reliable reference gene. Therefore, it is necessary to identify stable reference genes for gene expression study under MP or NP stress. We constructed a mouse model postexposure to polypropylene microplastics (PP-MPs) to assess PP-MPs bioaccumulation in kidney, evaluate the kidney pathological changes, and then explore potential reference genes via RT-qPCR. Although the hematoxylin-eosin staining showed no obvious damage in kidney tissues, we observed significant PP-MPs accumulation in kidney using Raman spectra analysis supported by spectral multivariate analysis. The expression of 19 candidate reference genes were examined, including the commonly used ones of β-actin, glyceraldehyde 3-phosphate dehydrogenase (Gapdh), Cytochrome c oxidase subunit 4I1 (Cox4i), Histocompatibility 13 (H13) and ribosomal protein. Their expression stability and reliability were assessed by the combination of four algorithms including geNorm, NormFinder, BestKeeper and Delta Cq. The geNorm analysis revealed that the top three genes with the lowest variability were Cox4il, Rps9 and Gapdh, whereas NormFinder results ranked Rps3, Cox4il and Rps18 as the top three ones. Rpl15, Cox4i1 and Rps3 were the most reliable reference genes in BestKeeper results, and Delta Cq proposed Rps3 and Cox4il as the stable genes. The overall ranking indicated by GMR value gave the five most stable reference genes (Cox4i1, Rps3, Rps9, Rps18 and Gapdh). Three genes associated with different biochemical processes (Atp5f1, Crebbp and Dele1) were chosen to verify the characterized reference genes using the least stable gene as a control, exhibiting different expression profiles and implying the essentiality to select the reliable reference genes. Our results documented the expression fluctuations of acknowledged reference gene (Ubc) and proposed a set of reliable reference genes for future studies of gene expression profiles in MP treated mouse models.

A Systematic Review of Nano- and Microplastic (NMP) Influence on the Bioaccumulation of Environmental Contaminants: Part I-Soil Organisms

Nano- and microplastics (NMPs) are a group of contaminants that cause concern due to their abundance in the environment, high persistence, and interaction with other contaminants. This review aims to understand the role of NMP in the bioaccumulation of environmental contaminants. For that, a comprehensive literature search was conducted to identify publications that compared the uptake of contaminants in the presence and absence of NMP. In this part I, twenty-eight publications of the terrestrial compartment were analyzed. Two main taxonomic groups were studied, namely, earthworms and terrestrial plants. In earthworms, most studies observed an increase in the bioaccumulation of the contaminants, while in plants, most studies observed a decrease in the bioaccumulation. Changes in bioavailable fractions of contaminants due to NMP presence was the main reason pointed out by the authors for their outcomes. Moreover, biological aspects were also found to be important in defining how NMPs affect bioaccumulation. Dermal damage and changes in contaminant-degrading bacteria in the gut of earthworms caused an increase in bioaccumulation, and root pore blockage was a common reason for the decrease in the bioaccumulation of contaminants in plants. Nevertheless, such effects were mainly observed at high, unrealistic NMP concentrations. Finally, knowledge gaps were identified, and the limitations of this systematic review were presented.

Accumulation of Plastics and Trace Elements in the Mangrove Forests of Bima City Bay, Indonesia

Pollution with microplastics (MPs), nanoplastics (NPs) and trace elements (TEs) remains a considerable threat for mangrove biomes due to their capability to capture pollutants suspended in the water. This study investigated the abundance and composition of plastics and TEs contained in the soil and pneumatophores of Avicennia alba sampled in experimental areas (hotel, market, river mouth, port, and rural areas) differentiated in anthropopressure, located in Bima Bay, Indonesia. Polymers were extracted and analyzed with the use of a modified sediment isolation method and Fourier transform infrared spectroscopy. Trace elements were detected by inductively coupled plasma optical emission spectrometry. The lowest and highest quantities of MPs in soil were recorded in rural and hotel areas, respectively. The rural site was characterized by distinct MP composition. The amounts of sediment-trapped MPs in the tested localities should be considered as high, and the recognized polymers partly corresponded with local human activity. Concentrations of seven plastic types found in plant tissues did not entirely reflect sediment pollution with nine types, suggesting a selective accumulation (particularly of polyamides and vinylidene chloride) and substance migration from other areas. Very low concentrations of non-biogenic TEs were observed, both in sediments and pneumatophores. The results highlight the relevance of environmental contamination with plastics.