Developmental trend of immunoassays for monitoring hazards in food samples: A review

Development of a nanobody-based immunoassay for the detection of Escherichia coli O157:H7 in food samples

Rapid and accurate detection of foodborne pathogens is crucial for food safety. E. coli O157:H7, a major foodborne pathogen, can cause severe illness even at low concentration, highlighting the necessity for effective detection methods. This study focuses on developing nanobodies specific to E. coli O157:H7, aiming to provide a more efficient, cost-effective, and stable analytical reagents which can be available internationally. An alpaca was immunized and a phage-displayed nanobody library was constructed. Following panning, nanobodies were expressed and characterized for their affinity and specificity. A nanobody-based immunoassay was developed, with a limit of detection of 8.7 × 103 cfu/mL. The matrix effect was evaluated, and the assay successfully detected E. coli O157:H7 in various food samples (with 5 cfu spiked), including ground beef, orange juice, and milk. The study developed a nanobody-based immunoassay for E. coli O157:H7 detection, underscoring the practical applicability of nanobodies for testing food safety monitoring.

Magnetic Prussian blue nanoparticles to enhance dual-readout lateral flow immunoassay for Salmonella typhimurium detection

BACKGROUND

Traditional immunochromatographic assay (ICA) test strips typically utilize colloidal gold nanoparticles as colorimetric signal reporters, but they often suffer from compromised sensitivity and quantitative accuracy, making them inadequate for the stringent demands of trace-level screening. In addition, the heterogeneous nature of food matrices, such as dairy products, meat, and ready-to-eat fruits and vegetables, complicates the accuracy and reliability of ICA for detecting foodborne pathogens. Therefore, enhancing the detection accuracy of ICA is critical to meet the stringent requirements for pathogen detection in complex food samples.

RESULTS

Here, we synthesized a novel Prussian blue-coated Fe3O4 nanoparticle (Fe3O4@PB) via a simple in-situ growth method. The synthesized Fe3O4@PB nanoparticles demonstrate a high magnetization strength and excellent photothermal conversion efficiency, enabling their application as efficient probes in ICA. Leveraging these properties, we developed a dual-readout ICA incorporating both colorimetric and photothermal modalities for the sensitive detection of Salmonella typhimurium in milk and lettuce samples. The detection limit (LOD) for Fe3O4@PB-ICA reached 2.5 × 103 CFU/mL in colorimetric formats and 1.04 × 103 CFU/mL in photothermal formats, representing approximately 4-fold and 10-fold improvements compared to AuNP-ICA (LOD = 1 × 104 CFU/mL). Furthermore, the average recovery rates ranged from 89.1 % to 111.9 %, while the coefficients of variation below 13.7 %, demonstrating excellent accuracy and precision.

SIGNIFICANCE

The proposed Fe3O4@PB serves as effective probe for purifying and enriching target analytes, significantly improving the accuracy and sensitivity of colorimetric and photothermal immunochromatographic analysis applications. By leveraging the magnetic and photothermal capabilities of Fe3O4@PB, the developed Fe3O4@PB-ICA represents a promising rapid diagnostic platform for the sensitive detection of foodborne pathogens and other analytes.

Recent advances in MXene nanozyme-based optical and electrochemical biosensors for food safety analysis

The importance of nanotechnology is increasing every day in different fields and, especially, the application of nanomaterials has attracted considerable attention in food safety. Among different nanomaterials, MXenes, which are two-dimensional (2D) transition metal-based layered materials made of nitrides and carbides, have revolutionized various fields as a cutting-edge scientific discovery in nanotechnology. These materials have been widely used in the structure of biosensors and sensors due to their excellent metallic conductivity, mechanical stability, optical absorbance, good redox capability, and higher heterogeneous electron transfer rate. In particular, the application of MXenes as nanozymes has highlighted their high performance to a great extent in biosensor domains. The growing interest in these nanozymes is attributed to their specific physicochemical features. The key enzymatic features of these materials include activities similar to oxidase, peroxidase, catalase, and superoxide dismutase. In this review, initially, several common synthesis methods of MXenes are presented, emphasizing their significant role as nanozymes in constructing efficient sensors. Subsequently, several common applications of MXene nanozymes in food safety analysis are delved into, including the detection of bacteria, mycotoxins, antibiotic residues, and pesticide residues, along with their applications in different electrochemical and optical biosensors. In addition, the gap, limitation, and future perspective of these novel nanozymes in food safety are highlighted.

Alkaline Phosphatase-Regulated DNAzyme Cleavage Coupled with CRISPR/Cas12a for Quantitative Detection of Deoxynivalenol in Agricultural Crops

Sensitive and simplified detection of a mycotoxin such as deoxynivalenol (DON) is crucial for food safety. In recent years, the CRISPR/Cas technology has demonstrated significant potential in detecting non-nucleic acids. Herein, we present a triple enzyme-assisted fluorescence immunoassay (TEFIA) that integrates alkaline phosphatase (ALP)-regulated DNAzyme cleavage with the CRISPR/Cas12a assay for the accurate detection of mycotoxin. By employing this method for detecting DON, we exhibit a low detection limit of 0.05 ng/mL and a satisfactory linear response between 0.1 and 10 ng/mL. This performance exceeds the conventional sensitivity levels found in traditional methods. TEFIA also demonstrates a good correlation with ic-ELISA for testing DON in real samples. Thus, it offers a robust and efficient detection platform for DON in complex matrices. Furthermore, TEFIA can be employed to identify various targets of interest by merely altering the antibody-antigen pairs, indicating its great potential in a wide range of applications.

Homogeneous fluorescence immunoassay based on AuNPs (AgNPs) quenching multicolor QDs@hydrogel beads for the simultaneous ultra-sensitive determination of aflatoxin B1 and capsaicinoids in food

A capsaicinoids (CPCs) broad spectrum monoclonal antibody with same recognition ability to capsaicin (CPC), dihydrocapsaicin (DCPC), nordihydrocapsaicin (NDCPC), and N-vanillylnonanamide (NV) is prepared. Chitosan (CS) hydrogel is used as the carrier of multicolor quantum dots (QDs) to prepare fluorescence hydrogel beads, CPCs and aflatoxin B1 (AFB1) antibody are coupled with fluorescence hydrogel beads to prepare signal probes. Using AuNPs (or AgNPs) as fluorescence quenching agent to prepare quenching probes followed forming a fluorescence quenching test system. Based on optimal group of signal and quenching probes, a novel, simple, convenient, and ultra-sensitive homogeneous fluorescence immunoassay for the simultaneous detection of CPCs and AFB1 is constructed. The limit of detection (LOD) of assay for AFB1 and CPC is 0.00064 μg L-1 and 0.00049 μg L-1, respectively. This method can realize the simultaneous rapid detection of AFB1 and CPCs in food, which provides a new strategy for the identification of kitchen waste oil.

Pressure Sensor Array Based on Four DNA-Nanoenzymes with Catalase-like Activity for Portable Multiple Detection of Foodborne Pathogens

This study has developed a pressure sensor array based on four functionalized DNA-nanoenzymes with catalase-like activity for multiple detections of foodborne pathogens through a portable pressure manometer. Benefiting from functionalization of 4-mercaptophenylboronic acid and β-mercaptoethylamine, the diversity of nonspecific interactions between four DNA-nanoenzymes and each of the nine bacteria leads to differences in pressure response patterns by catalyzing H2O2 to generate exclusive "fingerprints". As effective statistical tools for processing multivariate data, principal component analysis and hierarchical clustering analysis are employed to identify nine foodborne pathogens by analyzing pressure response patterns. Furthermore, the as-prepared sensor array can discriminate different mixtures of bacteria and achieve quantitative detection, with an average detection limit of 102 and 104 CFU mL-1 for Gram-positive and Gram-negative bacteria, respectively, demonstrating its desirable practicality and satisfactory accuracy for real sample detection. This study expands insights into multiple analyses of foodborne pathogens for food safety monitoring.

Advances in enhancement-type signal tracers and analysis strategies driven Lateral flow immunoassay for guaranteeing the agri-food safety

As a classical and continuously developing on-site sensor, Lateral flow immunoassay (LFIA) exhibits promising potential for advanced point-of-care testing (POCT). Especially given the significance of agri-food in human dietary structure and the ever-increasing agri-food safety concerns, improved analysis performance of LFIA is urgently required. Recently, flourishing enhancement-type signal tracers (STs) and brilliant enhancement-type analysis strategies have been actively pursued in the development of LFIA because these patterns endow immense feasibility in manufacturing target-oriented sensing platforms. To facilitate further advancements in this field, this review comprehensively examines the recent developments in enhancement-type STs (e.g., load-, green-, recognizable-, Janus-, and dyestuffs-type STs) and enhancement-type analysis strategies (e.g. immuno-network, in-situ growth, nanozymes, multi-signal readout, and software-assisted quantitative analytical strategies) that significantly improve precise analysis efficiency. Moreover, by conducting a comprehensive evaluation of the major advancements and aiming to identify future trends in LFIA-based sensor, the objective of this review is to provide recommendations for future research based on the challenges and opportunities of LFIA.

Highly Sensitive Lateral Flow Immunodetection of the Insecticide Imidacloprid in Fruits and Berries Reached by Indirect Antibody-Label Coupling

A highly sensitive lateral flow immunoassay (LFIA) for imidacloprid, a widely used neonicotinoid insecticide, has been developed. The LFIA realizes the indirect coupling of anti-imidacloprid antibodies and gold nanoparticle (GNP) labels directly in the course of the assay. For this purpose, the common GNPs conjugate with anti-imidacloprid antibodies and are changed into a combination of non-modified, anti-imidacloprid antibodies, and the GNPs conjugate with anti-species antibodies. The given approach provides the possibility of selecting independent concentrations of GNPs and anti-imidacloprid antibodies to obtain the influence of minimal imidacloprid concentrations in the samples on the formation of detected, labeled immune complexes. A comparative study of imidacloprid LFIAs with common and indirect antibody-label coupling was implemented. The second variant reduced the limit of detection (LOD) of imidacloprid 20 times, reaching 0.2 ng/mL and 0.002 ng/mL for visual and instrumental detection, respectively, thus surpassing the existing LFIAs for imidacloprid. The developed highly sensitive LFIA was tested for imidacloprid detection in freshly squeezed fruits and berries without any additional sample preparation. The imidacloprids revealed were in the range of 75-97% for grape, 75-85% for orange, and 86-97% for apple samples. The time of the testing was 15 min.

Establishment of Broad-Specificity Monoclonal Antibody-Based Immunoassay for Rapid Detection of Indole-Type and Indazole-Type Synthetic Cannabinoids and Metabolites

Synthetic cannabinoids (SCs) have emerged as one of the most severely abused categories of new psychoactive substances (NPS), exacerbating the global drug problem and posing significant threats to public health. Presently, a class of new amide-type SCs featuring an indazole or indole core has been identified in numerous cases of illegal drug use, but there is still a lack of comprehensive analysis methods of SC detection. Herein, monoclonal antibodies (mAbs) 2E4 and AE6 targeting 36 indole-type and indazole-type SCs and their metabolites with IC50 ranging from 0.14 to 85.28 ng/mL were prepared and the molecular mechanism of antibody recognition was elaborated. We established the indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) and gold immunochromatography assay (GICA) based on mAbs 2E4 and AE6 to detect indazole-type and indole-type SCs in urine and hair samples. Under optimal conditions, the proposed method detected ADB-BUTINACA (an indazole-type SC) with limits of detection (LODs) of 0.11 ng/mL for urine and 0.024 ng/mg for hair by ic-ELISA, and 1.02 ng/mL for urine and 0.046 ng/mg for hair by GICA; the LODs of 4F-MDMB-BUTICA (an indole-type SC) detection was 0.036 ng/mL for urine and 0.012 ng/mg for hair by ic-ELISA, and 0.54 ng/mL for urine and 0.03 ng/mg for hair by GICA. Collectively, our study provides a comprehensive foundation for the rapid screening and quantitation of SC derivatives in biological samples.

Reports of tropane alkaloid poisonings and analytical techniques for their determination in food crops and products from 2013 to 2023

Food safety is crucial to attaining food security and sustainability. Unsafe foods for human and animal consumption lead to product recalls and rejection, negatively impacting the global economy and trade. Similarly, climate change can adversely affect the availability of safe and nutritious food at the table. The changing climatic conditions and global food trade and transport can make the movement of toxic plants possible, resulting in food crops being increasingly invaded by some species of plants that produce toxic secondary metabolites, such as tropane alkaloids (TAs). Datura stramonium from the Solanaceae plant family is an invasive and virulent plant that produces high amounts of two TAs, atropine and scopolamine. Various food poisoning events following accidental or deliberate ingestion of foods contaminated by atropine and scopolamine from seeds of D. stramonium have been recorded in different locations globally. Due to these incidents, regulatory agencies require the development of plant toxin detection methods that can be used in the food chain as early as possible. This systematic review thus focuses on the TA determination techniques in food and feeds published between 2013 and 2023. A particular focus was given to the sample preparation methods, the improvements of each technique claimed, and data to support the performance of each method, especially the ability to measure at or below the maximum level. The review concludes with other technological advancements, including rapid spectroscopy, electrophoresis, and colorimetric methods, as well as the possibility of coupling with smartphones for use in on-farm detection and the challenges in applying them.

Comparison of Conjugates Obtained Using DMSO and DMF as Solvents in the Production of Polyclonal Antibodies and ELISA Development: A Case Study on Bisphenol A

When developing immunochemical test systems, it is necessary to obtain specific antibodies. Their quality depends, among other things, on the immunogen used. When preparing hapten-protein conjugates to obtain antibodies for low-molecular-weight compounds, the key factors are the structure of the hapten itself, the presence of a spacer, the size of the carrier protein and the degree of its modification by hapten molecules. This work shows that one additional factor-the conditions for obtaining the hapten-protein conjugate-is overlooked. In this work, we have synthesized conjugates of bisphenol A derivative 4,4-bis(hydroxyphenyl)valeric acid (BVA), the protein carrier soybean trypsin inhibitor (STI), and bovine serum albumin (BSA) in reaction media combining water with two organic solvents: dimethylformamide (DMF) or dimethyl sulfoxide (DMSO). Namely, BSADMF-BVA, STIDMF-BVA, BSADMSO-BVA and STIDMSO-BVA conjugates were obtained. Rabbit polyclonal antibodies against the BSADMF-BVA conjugate demonstrated basically different interactions in the developed ELISA systems using either STIDMF-BVA or STIDMSO-BVA conjugates. The use of the STIDMF-BVA conjugate demonstrated the absence of competition in combination with antisera obtained from BSADMF-BVA in an ELISA. A competitive interaction was observed only with the use of the STIDMSO-BVA conjugate. Under the selected conditions, the detection limit of bisphenol A was 8.3 ng/mL, and the working range of determined concentrations was 18.5-290.3 ng/mL. The obtained data demonstrate the possibility of achieving sensitive immunoassays by simply varying the reaction media for the hapten-protein conjugation, which could provide an additional tool in the development of immunoassays for other low-molecular-weight compounds.

Bifunctional bovine serum albumin modification driven sensitivity-enhanced lateral flow immunoassay for small molecule hazards monitoring in food

Traditional lateral flow immunoassays (TLFIAs) are valued for their simplicity, speed, and user-friendliness. However, the specificity of conventional test strips often necessitates large quantities of antigen-protein conjugates for target detection, which can be resource-intensive. Here, we present a strategy aimed at enhancing the universality of test strips while reducing the consumption of antigen-protein conjugates, without compromising sensitivity. By coating streptavidin on the test line and employing bifunctional antigen-protein conjugates (competitor to target and immunoprobe linker), the test strip was thus served as a universal module. We developed three universal lateral flow immunoassays (ULFIAs) for the detection of aflatoxin B1 (AFB1), carbendazim (CBZ), and enrofloxacin (ENR). Compared to traditional methods based on the same aggregation-induced emission fluorescent microspheres, the proposed ULFIAs demonstrated a significant increase in sensitivity, with enhancements of 11.0-fold for AFB1, 10.9-fold for CBZ, and 4.1-fold for ENR. Additionally, this approach substantially reduced the consumption of antigen-protein conjugates by 19.1-fold, 40.9-fold, and 23.8-fold, respectively, thereby promoting greener detection methods. This bifunctional antigen conjugate strategy offers a promising pathway for the sensitive detection of small molecule hazards.

Recent Advances in Nanozyme Sensors Based on Metal-Organic Frameworks and Covalent-Organic Frameworks

Nanozymes are nanomaterials that exhibit enzyme-like catalytic activity, which have drawn increasing attention on account of their unique superiorities including very high robustness, low cost, and ease of modification. Metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs) have emerged as promising candidates for nanozymes due to their abundant catalytic activity centers, inherent porosity, and tunable chemical functionalities. In this review, we first compare the enzyme-mimicking activity centers and catalytic mechanisms between MOF and COF nanozymes, and then summarize the recent research on designing and modifying MOF and COF nanozymes with inherent catalytic activity. Moreover, typical examples of sensing applications based on these nanozymes are presented, as well as the translation of enzyme catalytic activity into a visible signal response. At last, a discussion of current challenges is presented, followed by some future prospects to provide guidance for designing nanozyme sensors based on MOFs and COFs for practical applications.

Immunodetection of Poorly Soluble Substances: Limitations and Their Overcoming

Immunoassays based on the specific antigen-antibody interactions are efficient tools to detect various compounds and estimate their content. Usually, these assays are implemented in water-saline media with composition close to physiological conditions. However, many substances are insoluble or cannot be molecularly dispersed in such media, which objectively creates problems when interacting in aquatic environments. Thus, obtaining immunoreactants and implementing immunoassays of these substances need special methodological solutions. Hydrophobicity of antigens as well as their limited ability to functionalization and conjugation are often overlooked when developing immunoassays for these compounds. The main key finding is the possibility to influence the behavior of hydrophobic compounds for immunoassays, which requires specific approaches summarized in the review. Using the examples of two groups of compounds-surfactants (alkyl- and bisphenols) and fullerenes, we systematized the existing knowledge and experience in the development of immunoassays. This review addresses the challenges of immunodetection of poorly soluble substances and proposes solutions such as the use of hydrotropes, other solubilization techniques, and alternative receptors (aptamers and molecularly imprinted polymers).

Antiviral drugs in animal-derived matrices: A review

The ban of antiviral drugs in food-producing animals in several parts of the world, latest by Commission Delegated Regulation (EU) 2022/1644, has increased the need for food control laboratories to develop analytical methods and perform official controls. However, little is known about antiviral drugs, their use, and its analysis in food-producing animals in the EU. This review aims to provide insights into relevant viruses, antiviral drugs, and animal-derived matrices for analytical method development and monitoring purposes to implement in food control laboratories. For years, animal viruses, such as African swine fever and avian influenza, have caused many outbreaks. Besides, they led to large economic losses due to the applied control measures and a lack of available treatments. Considering these losses and the known effectiveness of authorized human antiviral drugs in different organisms, medicines such as amantadine in Chinese poultry have been misused. Various analytical methods, including screening assays and sensors (published 2016-2023), and mass spectrometry methods (published 2012-2023) have been outlined in this review for the monitoring of antiviral drugs in animal-derived matrices. However, pharmacokinetics information on metabolite formation and distribution of these substances in different animal-derived matrices is incomplete. Additionally, apart from a few countries, there is a lack of available data on the potential misuse of different antiviral drugs in animal-derived matrices. Although a handful of important antiviral drugs, such as influenza, broad-spectrum, antiretroviral, and herpes drugs, and animal-derived matrices, such as chicken muscle, are identified, the priority of the scope should be further specified by closing the aforementioned gaps.

Investigation of Antibody Tolerance in Methanol for Analytical Purposes: Methanol Effect Patterns and Molecular Mechanisms

The extraction of targets from biological samples for immunoassays using organic solvents, such as methanol, is often necessary. However, high concentrations of organic solvents in extracts invariably lead to instability of the employed antibody, resulting in poor performance of the immunoassay. Evaluating the tolerance ability and exploring the molecular mechanisms of antibody tolerance in organic solvents are essential for the development of robust immunoassays. In this work, 25 monoclonal antibodies and methanol are utilized as models to address these questions. A novel protocol is initially established to precisely and rapidly determine antibody tolerance in methanol, identifying two distinct methanol effect patterns. Through a detailed investigation of the structural basis, a novel hypothesis regarding methanol effect patterns is proposed, termed "folding-aggregation," which is subsequently validated through molecular dynamics simulations. Furthermore, the investigation of sequence basis reveals significant differences in residue types within the complementarity-determining regions and ligand-binding residues, distinguishing the two antibody methanol effect patterns. Moreover, the methanol effect patterns of the antibodies are defined by germline antibodies. This work represents the first exploration of antibody methanol effect patterns and associated molecular mechanisms, with potential implications for the discovery and engineering of tolerant antibodies for the development of robust immunoassays.

Efficient Photothermal Sensor Based on Coral-Like Hollow Gold Nanospheres for the Sensitive Detection of Sulfonamides

Gold nanoparticles (AuNPs), universally regarded as colorimetric signal reporters, are widely employed in lateral flow immunoassays (LFIAs). However, it is difficult for AuNPs-LFIA to achieve a wide range and sensitive detection. Herein, novel coral-like hollow gold nanospheres (CHGNPs) are synthesized. The growth of gold nanospheres can be regulated to obtain a multibranched and hollow construction. The obtained CHGNPs possess intense broadband absorption across the visible to near-infrared region, exhibiting a high molar extinction coefficient of 14.65 × 1011 M-1 cm-1 and a photothermal conversion efficiency of 79.75%. Thus, the photothermal/colorimetric dual-readout LFIA is developed based on CHGNPs (CHGNPs-PT-LFIA and CHGNPs-CM-LFIA) to effectively improve the detection sensitivity and broaden the detection range in regard to sulfonamides (SAs). The limits of detection of the CHGNPs-PT-LFIA and CHGNPs-CM-LFIA reached 1.9 and 2.8 pg mL-1 for the quantitative detection of sulfaquinoxaline, respectively, which are 6.3-fold and 4.3-fold lower than that of the AuNPs-LFIA. Meanwhile, the CHGNPs-PT-LFIA broadened the detection range to three orders of magnitude, which ranged from 2.5 to 5000 pg mL-1. The synthesized photothermal CHGNPs have been proven effective in improving the performance of the LFIA and provide a potential option for the construction of sensing platforms.

Popcorn-like bimetallic palladium/platinum exhibiting enhanced peroxidase-like activity for signal enhancement in lateral flow immunoassay

BACKGROUND

The lateral flow immunoassay (LFIA) is widely employed as a point-of-care testing (POCT) technique. However, its limited sensitivity hinders its application in detecting biomarkers with low abundance. Recently, the utilization of nanozymes has been implemented to enhance the sensitivity of LFIA by catalyzing the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). The catalytic performance of nanozymes plays a crucial role in influencing the sensitivity of LFIA.

RESULTS

The Cornus officinalis Sieb. et Zucc-Pd@Pt (CO-Pd@Pt) nanozyme with good peroxidase-like activity was synthesized herein through a facile one-pot method employing Cornus officinalis Sieb. et Zucc extract as a reducing agent. The morphology and composition of the CO-Pd@Pt nanozyme were characterized using TEM, SEM, XRD, and XPS. As a proof of concept, the as-synthesized CO-Pd@Pt nanozyme was utilized in LFIA (CO-Pd@Pt-LFIA) for the detection of human chorionic gonadotropin (hCG). Compared to conventional gold nanoparticles-based LFIA (AuNPs-LFIA), CO-Pd@Pt-LFIA demonstrated a significant enhancement in the limit of detection (LOD, 0.08 mIU/mL), which is approximately 160 times lower than that of AuNPs-LFIA. Furthermore, experiments evaluating accuracy, precision, selectivity, interference, and stability have confirmed the practical applicability of CO-Pd@Pt-LFIA for hCG content determination.

SIGNIFICANCE

The present study presents a novel approach for the synthesis of bimetallic nanozymes through environmentally friendly methods, utilizing plant extracts as both protective and reducing agents. Additionally, an easily implementable technique is proposed to enhance signal detection in lateral flow immunoassays.

Harnessing Bioluminescent Bacteria to Develop an Enzymatic-free Enzyme-linked immunosorbent assay for the Detection of Clinically Relevant Biomarkers

Enzyme-linked immunosorbent assay (ELISA) is the gold standard technique for measuring protein biomarkers due to its high sensitivity, specificity, and throughput. Despite its success, continuous advancements in ELISA and immunoassay formats are crucial to meet evolving global challenges and to address new analytical needs in diverse applications. To expand the capabilities and applications of immunoassays, we introduce a novel ELISA-like assay that we call Bioluminescent-bacteria-linked immunosorbent assay (BBLISA). BBLISA is an enzyme-free assay that utilizes the inner filter effect between the bioluminescent bacteriaAllivibrio fischeriand metallic nanoparticles (gold nanoparticles and gold iridium oxide nanoflowers) as molecular absorbers. Functionalizing these nanoparticles with antibodies induces their accumulation in wells upon binding to molecular targets, forming the classical immune-sandwich complex. Thanks to their ability to adsorb the light emitted by the bacteria, the nanoparticles can suppress the bioluminescence signal, allowing the rapid quantification of the target. To demonstrate the bioanalytical properties of the novel immunoassay platform, as a proof of principle, we detected two clinically relevant biomarkers (human immunoglobulin G and SARS-CoV-2 nucleoprotein) in human serum, achieving the same sensitivity and precision as the classic ELISA. We believe that BBLISA can be a promising alternative to the standard ELISA techniques, offering potential advancements in biomarker detection and analysis by combining nanomaterials with a low-cost, portable bioluminescent platform.

CRISPR/Cas12a-Amplified Aptamer Switch Microplate Assay for Small Molecules

The presence of small molecule contaminants such as mycotoxins and heavy metals in foods and the environment causes a serious threat to human health and huge economic losses. The development of simple, rapid, sensitive, and on-site methods for small molecule pollutant detection is highly demanded. Here, combining the advantages of structure-switchable aptamer-mediated signal conversion and CRISPR/Cas12a-based signal amplification, we developed a CRISPR/Cas12a-amplified aptamer switch assay on a microplate for sensitive small molecule detection. In this assay, a short DNA strand complementary to the aptamer (cDNA) is immobilized on a microplate, which can capture the aptamer-linked active DNA probe (Apt-acDNA) in the sample solution when the target is absent. With the addition of the Cas12a reporter system, the captured Apt-acDNA probes activate Cas12a to indiscriminately cleave fluorescent DNA substrates, producing a high fluorescence signal. When the target is present, the Apt-acDNA probe specifically binds to the target rather than hybridizing with cDNA on the microplate, and the fluorescence signal is reduced. The analytical performance of our method was demonstrated by the detection of two highly toxic pollutants, aflatoxin B1 (AFB1) and cadmium ion (Cd2+), as examples. The assay exhibited good selectivity and high sensitivity, with detection limits of 31 pM AFB1 and 3.9 nM Cd2+. It also allowed the detection of targets in the actual sample matrix. With the general signal conversion strategy, this method can be used to detect other targets by simply changing the aptamer and cDNA, showing potential practical applications in broad fields.

Antibody-Bridged DNAzyme Walker for Sensitive Detection of Small Molecules

Sensitive detection of small molecules with biological and environmental interests is important for many applications, such as food safety, disease diagnosis, and environmental monitoring. Herein, we propose a highly selective antibody-bridged DNAzyme walker to sensitively detect small molecules. The antibody-bridged DNAzyme walker consists of a track, small-molecule-labeled DNAzyme walking strand, and antibody against small molecules. The track is built by co-modifying fluorophore-labeled substrates and small-molecule-labeled DNA linkers onto a gold nanoparticle (AuNP). In the absence of the target molecule, the antibody binds small molecule labels at the DNAzyme walking strand and the DNA linker, driving the DNAzyme walking strand on the surface of the AuNP. The attached DNAzyme walking strand moves along the track and cleaves substrates to generate high fluorescence signals to achieve signal amplification. As target molecules exist, they competitively bind with antibody to displace the small-molecule-labeled linker and DNAzyme walking strand, rendering the DNAzyme walker inactive in substrate cleavage and causing weak fluorescence. By using this antibody-bridged DNAzyme walker, we achieved sensitive detection of two biologically important small molecules, digoxin and folic acid. This work provides a new paradigm by combining the signal amplification strategy of a DNA walker and immunorecognition for sensitive and selective detection of small molecules.

A facile fluorescence microplate immunoassay based on an in situ fluorogenic reaction for the detection of two highly toxic anticoagulant rodenticides in food and biological matrix

Bromadiolone and brodifacoum, the most frequently used anticoagulant rodenticides, are highly toxic and pose a threat to public health by causing food poisoning incidents. Here, we developed a fluorescence microplate immunoassay for facile and sensitive detection of bromadiolone and brodifacoum by introducing three commercial chemicals (p-phenylenediamine, polyethyleneimine, H2O2) as a new substrate of horseradish peroxidase and then generating fluorescence signals based on an in situ fluorogenic reaction (detection time within 75 min). This assay exhibited higher efficiency in generating fluorescence signals, thereby exhibiting a 6-fold improvement in sensitivity compared with colorimetric ELISA. The limit of detection was 0.23-0.28 ng/mL (ng/g) for bromadiolone and 0.34-0.61 ng/mL (ng/g) for brodifacoum in corn and human serum, with recovery ratios higher than 82.3 %. These satisfactory results illustrated our proposed assay was a potential tool for food analysis and poisoning diagnosis caused by bromadiolone and brodifacoum.

An automatic and smart platform for rapid detection of cadmium and lead simultaneously in rice using triple-amplified chemiluminescence immunoassay

Rapid detection of trace ions is urgently needed for large-scale screening to ensure food safety. This study developed an innovative and automatic strategy, based on a smart-designed platform for rapid detection of cadmium and lead in rice. As bridge antibody, the antigen was conjugated with goat anti-mouse immunoglobulin G labeled alkaline phosphatase. Meanwhile, a biotin-streptavidin system was introduced to micromagnetic particles, thus providing a triple-amplified chemiluminescence immunoassay with high sensitivity, accuracy and specificity. The limits of detection for cadmium and lead were 0.06 and 1.00 ng mL-1, respectively, within 30 min. The recoveries ranged from 89.81 to 114.92 %, with relative standard deviations less than 9.2 %. The results obtained agreed with those of inductively coupled plasma-mass spectrometry and certified reference materials. Additionally, the auto-operation avoided human errors as well as being convenient, fast, automatic and high-throughput. Therefore, this smart platform can be applied for large-scale Cd2+ and Pb2+ screening.

An Electrochemical Immunosensor Based on Chitosan-Graphene Nanosheets for Aflatoxin B1 Detection in Corn

We reported a highly efficient electrochemical immunosensor utilizing chitosan-graphene nanosheets (CS-GNs) nanocomposites for the detection of aflatoxin B1 (AFB1) in corn samples. The CS-GNs nanocomposites, serving as a modifying layer, provide a significant specific surface area and biocompatibility, thereby enhancing both the electron transfer rate and the efficiency of antibody immobilization. The electrochemical characterization was conducted utilizing both differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). Moreover, the antibody concentration, pH, antibody immobilization time, and immunoreaction time, were optimized. The results showed that the current change (ΔI) before and after the immunoreaction demonstrated a strong linear relationship (R2=0.990) with the AFB1 concentration, as well as good specificity and stability. The linear range extended from 0.05 to 25 ng/mL, with a detection limit of 0.021 ng/mL (S/N=3). The immunosensor exhibited a recovery rate ranging from 97.3% to 101.4% in corn samples, showing a promising performance using an efficient method, and indicating a remarkable prospect for the detection of fungal toxins in grains.

Comprehensive Epitope Analysis of Monoclonal Antibodies Binding to Hen Egg Ovalbumin Using a Peptide Array

Food allergies are a significant health issue worldwide. In many countries, labeling of primary allergens in food products has been made mandatory to ensure consumer safety. In food manufacturing settings, the lateral flow immunoassay (LFI)-based on antigen-antibody reactions-is a rapid and accurate method for allergen testing and is widely used. Peptide arrays are tools that enable the synthesis of peptides of any sequence on a substrate and high-throughput analysis of their interactions with chemicals. This study aimed to investigate a new application of peptide arrays in the field of food technology, particularly in the development of antibodies for food allergen testing. First, monoclonal antibodies against hen egg ovalbumin, a major food allergen, were produced. Then, using a peptide array, the epitope and specificity of the antibodies were comprehensively and precisely analyzed. Finally, an LFI kit incorporating the antibodies demonstrated both high specificity and detection sensitivity for food allergen testing. These findings indicate that peptide arrays are valuable tools in the development of antibodies for food allergen testing, ensuring reliability and accuracy at the molecular level.

Advances and Challenges in Nanomaterial-Based Electrochemical Immunosensors for Small Cell Lung Cancer Biomarker Neuron-Specific Enolase

Early and rapid detection of neuron-specific enolase (NSE) is highly significant, as it is putative biomarker for small-cell lung cancer as well as COVID-19. Electrochemical techniques have attracted substantial attention for the early detection of cancer biomarkers due to the important properties of simplicity, high sensitivity, specificity, low cost, and point-of-care detection. This work reviews the clinically relevant labeled and label-free electrochemical immunosensors developed so far for the analysis of NSE. The prevailing role of nanostructured materials as electrode matrices is thoroughly discussed. Subsequently, the key performances of various immunoassays are critically evaluated in terms of limit of detection, linear ranges, and incubation time for clinical translation. Electrochemical techniques coupled with screen-printed electrodes developing market level commercialization of NSE sensors is also discussed. Finally, the review concludes with the current challenges associated with available methods and provides a future outlook toward commercialization opportunities for easy detection of NSE.

A novel photothermal sensing probe based on violet phosphorus for sensitive immunochromatographic sensing detection

Photothermal immunochromatographic sensor is an emerging detection technology, and it is important to develop new sensing probes with excellent photothermal performance to improve its detection performance. In the present study, a novel photothermal sensing probe based on violet phosphorus nanosheets with satisfactory photothermal conversion efficiency (31.1 %) was reported for the first time. A photothermal immunochromatographic sensor using the above probe was applied for visual and photothermal detection of diethylstilbestrol. The diethylstilbestrol concentration was inversely proportional to photothermal sensing signal and showed a good linear correlation in the range of 0.75 ∼ 50 μg·L-1. After optimizing, the visual and photothermal detection limits were 6 μg·L-1 and 0.56 μg·L-1, respectively. The recovery rates in tap water, milk and pork samples ranged from 82.2 % to 115.2 %, with a coefficient of variation (CV) ranging from 2.0 % to 10.8 %. This work not only structured a new type of photothermal probe, but also expanded the application range of violet phosphorus.

Fluorescence Resonance Energy Transfer (FRET)-Based Sensor for Detection of Foodborne Pathogenic Bacteria: A Review

Sensitive and rapid determination of foodborne pathogenic bacteria is of practical importance for the control and prevention of foodborne illnesses. Nowadays, with the prosperous development of fluorescence assays, fluorescence resonance energy transfer (FRET)-derived diagnostic strategies are extensively employed in quantitative analysis of different pathogenic bacteria in food-related matrices, which displays a rapid, simple, stable, reliable, cost-effective, selective, sensitive, and real-time way. Considering the extensive efforts that have been made in this field so far, we here discuss the up-to-date developments of FRET-based diagnostic approaches for the determination of key foodborne pathogens like Staphylococcus aureus, Escherichia coli, Vibrio parahaemolyticus, Salmonella spp., Campylobacter spp., and Bacillus cereus in complex food-related matrices. Moreover, the principle of this technology, the choosing standards of acceptor-donor pairs, and the fluorescence properties are also profiled. Finally, the current prospects and challenges in this field are also put forward.

Detection of a Thermal Stable-Soluble Protein (TSSP) as a Marker of Peanut Adulteration Using a Highly Sensitive Indirect Enzyme-Linked Immunosorbent Assay based on Monoclonal Antibodies

Food allergy represents a severe problem for many societies, including sensitive populations, academies, health authorities, and the food industry. Peanut allergy occupies a special place in the food allergy spectrum. To prevent consumption by consumers suffering from a peanut allergy, a rapid and sensitive detection method is essential to identify unintended peanut adulteration in processed foods. In this study, we produced four monoclonal antibodies (MAbs; RO 3A1-12, PB 4C12-10, PB 5F9-23, and PB 6G4-30) specific to thermo-stable and soluble proteins (TSSPs) of peanut and developed an enzyme-linked immunosorbent assay (ELISA) based on the MAbs. Among them, PB 5F9-23 MAb was firmly bound to Ara h 1, and other MAbs strongly reacted to Ara h 3 in the Western blot analysis. An antibody cocktail solution of the MAbs was used to enhance the sensitivity of an indirect ELISA, and the limit of detection of the indirect ELISA based on the antibody cocktail solution was 1 ng/ml and improved compared to the indirect ELISA based on the single MAb (11 ng/ml). The cross-reaction analysis revealed the high specificity of developed MAbs to peanut TSSPs without cross-reaction to other food allergens, including nuts. Subsequently, analyzing processed foods by indirect ELISA, all foods labeled as containing peanuts in the product description were confirmed to be positive. The results indicate that the developed antibodies exhibit high specificity and sensitivity to peanuts and can be used as bio-receptors in immunoassays or biosensors to detect intentional or unintentional adulteration of peanuts in processed foods, particularly heat-processed foods.

Sensitive fluorescence ELISA with streptavidin scaffolded DNA tetrads for the detection of Escherichia coli O157:H7

Escherichia coli O157:H7 poses a threat to humans. Traditional ELISA is not a sensitive method for the detection of E. coli O157:H7. Here, an efficient method was designed for improving the load capacity of alkaline phosphatase (ALP) with streptavidin scaffolded DNA tetrad (SS-DNAt). With more ALP, more ascorbic acid 2-phosphate was catalyzed to ascorbic acid that was used to synthesize fluorescence poly adenine-thymine-templated copper nanoclusters. Based on SS-DNAt, fluorescence ELISA was successfully proposed for improving the sensitivity for detection of E. coli O157:H7 in milk samples. The method showed a linear range of 104 to 106 cfu/mL. The limit of detection of fluorescence ELISA was 3.75 × 103 cfu/mL and 6.16-fold better than that of traditional ELISA. The recovery of the fluorescence ELISA was 86.7 to 93.6% with the coefficient of variation of 5.6 to 10.5% in milk. This method could be used to detect hazardous material in food.

Design of an Antigen-Triggered Nanobody-Based Fluorescence Probe for PET Immunoassay to Detect Quinalphos in Food Samples

Photoinduced electron-transfer (PET) immunoassay based on a fluorescence site-specifically labeled nanobody, also called mini Quenchbody (Q-body), exhibits extraordinary sensitivity and saves much time in the homogeneous noncompetitive mode and is therefore regarded as a valuable method. However, limited by the efficiency of both quenching and dequenching of the fluorescence signal before and after antigen binding associated with the PET principle, not all original nanobodies can be used as candidates for mini Q-bodies. Herein, with the anti-quinalphos nanobody 11A (Nb-11A) as the model, we, for the first time, adopt a strategy by combining X-ray structural analysis with site-directed mutagenesis to design and produce a mutant Nb-R29W, and then successfully generate a mini Q-body by labeling with ATTO520 fluorescein. Based on this, a novel PET immunoassay is established, which exhibits a limit of detection of 0.007 μg/mL with a detection time of only 15 min, 25-fold improved sensitivity, and faster by 5-fold compared to the competitive immunoassay. Meanwhile, the recovery test of vegetable samples and validation by the standard ultraperformance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) both demonstrated that the established PET immunoassay is a novel, sensitive, and accurate detection method for quinalphos. Ultimately, the findings of this work will provide valuable insights into the development of triggered PET fluorescence probes by using existing antibody resources.

Ultrasensitive and simultaneous monitoring of multiple small-molecule pollutants on an immunochromatographic strip with multilayered film-like fluorescent tags

A wide variety of small-molecule pollutants is harmful to human health, and their highly sensitive universal and rapid detection in complex environments remains a challenge. Herein, a multiplexed and ultrasensitive immunochromatographic strip (ICS) was developed for the universal analysis of three kinds of different pollutants based on multilayered fluorescent nanofilm-guided signal amplification. Flexible three-dimensional nanofilms (GO-MQD) with large surface areas, high quantum dot (QD) loading, superior luminescence, and good stability were synthesized through the electrostatic adsorption-mediated layer-by-layer assembly of three layers of small QDs onto two-dimensional graphene oxide (GO) nanosheets, modified with specific antibodies, and utilized as enhanced fluorescent tags in the ICS method for quantitative target detection. By combining the GO-MQD nanofilms and multiplexed ICS, the proposed assay can rapidly and sensitively detect aflatoxin B1, clenbuterol, and kanamycin in actual samples/environmental samples (pork extract, milk, river water, and lake water) with low detection limit (0.87, 2.04, and 0.81 pg/mL), fast testing time (15 min), good stability and high reproducibility (RSD < 8.71 %). The GO-MQD-ICS method developed here exhibits great potential to meet the demands of the on-site and practical detection of small-molecule pollutants.

A Quencher-Based Blood-Autofluorescence-Suppression Strategy Enables the Quantification of Trace Analytes in Whole Blood

Precise quantification of trace components in whole blood via fluorescence is of great significance. However, the applicability of current fluorescent probes in whole blood is largely hindered by the strong blood autofluorescence. Here, we proposed a blood autofluorescence-suppressed sensing strategy to develop an activable fluorescent probe for quantification of trace analyte in whole blood. Based on inner filter effect, by screening fluorophores whose absorption overlapped with the emission of blood, a redshift BODIPY quencher with an absorption wavelength ranging from 600-700 nm was selected for its superior quenching efficiency and high brightness. Two 7-nitrobenzo[c] [1,2,5] oxadiazole ether groups were introduced onto the BODIPY skeleton for quenching its fluorescence and the response of H2 S, a gas signal molecule that can hardly be quantified because of its low concentration in whole blood. Such detection system shows a pretty low background signal and high signal-to-back ratio, the probe thus achieved the accurate quantification of endogenous H2 S in 20-fold dilution of whole blood samples, which is the first attempt of quantifying endogenous H2 S in whole blood. Moreover, this autofluorescence-suppressed sensing strategy could be expanded to other trace analytes detection in whole blood, which may accelerate the application of fluorescent probes in clinical blood test.

A Magnetic-Bead-Based Immunoassay with a Newly Developed Monoclonal Antibody for Rapid and Highly Sensitive Detection of Forchlorfenuron

Forchlorfenuron (CPPU) is a widely used plant growth regulator in agriculture, and CPPU residue in food can cause harm to human health. Thus, it is necessary to develop a rapid and sensitive detection method for CPPU monitoring. In this study, a new monoclonal antibody (mAb) against CPPU with high affinity was prepared by a hybridoma technique, and a magnetic bead (MB)-based analytical method was established for the determination of CPPU by a one-step procedure. Under optimized conditions, the detection limit of the MB-based immunoassay was as low as 0.0004 ng/mL, which was five times more sensitive than the traditional indirect competitive ELISA (icELISA). In addition, the detection procedure took less than 35 min, a significant improvement over the 135 min required for icELISA. The selectivity test of the MB-based assay also showed negligible cross-reactivity with five analogues. Furthermore, the accuracy of the developed assay was assessed by the analysis of spiked samples, and the results agreed well with those obtained by HPLC. The excellent analytical performance of the proposed assay suggests its great potential for routine screening of CPPU, and it provides a basis for promoting the application of more immunosensors in the quantitative detection of low concentrations of small organic molecules in food.

CRISPR-based biosensors for pathogenic biosafety

Pathogenic biosafety is a worldwide concern. Tools for analyzing pathogenic biosafety, that are precise, rapid and field-deployable, are highly demanded. Recently developed biotechnological tools, especially those utilizing CRISPR/Cas systems which can couple with nanotechnologies, have enormous potential to achieve point-of-care (POC) testing for pathogen infection. In this review, we first introduce the working principle of class II CRISPR/Cas system for detecting nucleic acid and non-nucleic acid biomarkers, and highlight the molecular assays that leverage CRISPR technologies for POC detection. We summarize the application of CRISPR tools in detecting pathogens, including pathogenic bacteria, viruses, fungi and parasites and their variants, and highlight the profiling of pathogens' genotypes or phenotypes, such as the viability, and drug-resistance. In addition, we discuss the challenges and opportunities of CRISPR-based biosensors in pathogenic biosafety analysis.

A multiple lateral flow immunoassay based on AuNP for the detection of 5 chemical contaminants in milk

Melamine (MEL), enrofloxacin (ENR), sulfamethazine (SMZ), tetracycline (TC), and aflatoxin M₁ (AFM₁) are the main chemical contaminants in milk. It is necessary to detect these miscellaneous chemical contaminants in milk synchronously to ensure the safety of the milk. In this study, a multiple lateral flow immunoassay (LFIA) was developed for the detection of MEL, ENR, SMZ, TC, and AFM₁ in milk. Under optimal experimental conditions, the cutoff values were 25 ng/mL for MEL, 1 ng/mL for ENR, 2.5 ng/mL for SMZ, 2.5 ng/mL for TC, and 0.25 ng/mL for AFM₁ in milk samples. The limits of detection of LFIA were 0.173 ng/mL for MEL, 0.078 ng/mL for ENR, 0.059 ng/mL for SMZ, 0.082 ng/mL for TC, and 0.0064 ng/mL for AFM₁. The recovery rates of LFIA in milk were 83.2-104.4% for MEL, 76.5-127.3% for ENR, 96.8-113.5% for SMZ, 107.1-166.6% for TC, and 93.5-130.3% for AFM₁. The coefficients of variation were all less than 15%. As a whole, the developed multiple lateral flow immunoassay showed potential as a highly reliable and excellent tool for the rapid and sensitive screening of MEL, ENR, SMZ, TC, and AFM₁ in milk.

Oxygen Sensor-Based Respirometry and the Landscape of Microbial Testing Methods as Applicable to Food and Beverage Matrices

The current status of microbiological testing methods for the determination of viable bacteria in complex sample matrices, such as food samples, is the focus of this review. Established methods for the enumeration of microorganisms, particularly, the 'gold standard' agar plating method for the determination of total aerobic viable counts (TVC), bioluminescent detection of total ATP, selective molecular methods (immunoassays, DNA/RNA amplification, sequencing) and instrumental methods (flow cytometry, Raman spectroscopy, mass spectrometry, calorimetry), are analyzed and compared with emerging oxygen sensor-based respirometry techniques. The basic principles of optical O₂ sensing and respirometry and the primary materials, detection modes and assay formats employed are described. The existing platforms for bacterial cell respirometry are then described, and examples of particular assays are provided, including the use of rapid TVC tests of food samples and swabs, the toxicological screening and profiling of cells and antimicrobial sterility testing. Overall, O₂ sensor-based respirometry and TVC assays have high application potential in the food industry and related areas. They detect viable bacteria via their growth and respiration; the assay is fast (time to result is 2-8 h and dependent on TVC load), operates with complex samples (crude homogenates of food samples) in a simple mix-and-measure format, has low set-up and instrumentation costs and is inexpensive and portable.

Cartridge voltage-sensitive micropump immunosensor based on a self-assembled polydopamine coating mediated signal amplification strategy

Current biosensing detection assays were developed to focus on rapid, low-cost, stable detection for clinical diagnosis and food safety monitoring. In this work, a novel portable cartridge voltage-sensitive micropump immunosensor (CVMS) biosensing device based on the integration of the microchannel circuit biosensing principle and polydopamine (PDA) was presented for rapid and sensitive detection of pathogenic factors in real samples at trace levels. The CVMS can sensitively evaluate voltage signal changes caused by clogging effects in the closed-loop circuit when the insulated microspheres pass through the microchannel. The targets could trigger the immune reaction between antibody-antigens that leads to the change in the concentration of horseradish peroxidase (HRP). And the HRP was further employed to catalyze the polymerization of dopamine into PDA, resulting in the rapid formation of the magnetic @PDA nanoparticles (MNP@PDA) with core-shell structures. The abundant functional groups on the MNP@PDA surface can efficiently adsorb polystyrene microspheres, thus causing changes in the number of polystyrene microspheres (PS). The CVMS can accurately monitor the change of PS with a portable device, which weighs less than 0.8 kg and costs only $50. The completion of CVMS takes 90 min to complete. The limit of detection of this immunosensor for procalcitonin and ochratoxin A were 42 pg/mL and 77 pg/mL, respectively, which improved about 15 folds and 38 folds, respectively, than those of enzyme-linked immunosorbent assay.

Lateral Flow Immunoassay for Proteins

Protein biomarkers are useful for disease diagnosis. Identification thereof using in vitro diagnostics such as lateral flow immunoassays (LFIAs) has attracted considerable attention due to their low cost and ease of use especially in the point of care setting. Current challenges, however, do remain with respect to material selection for each component in the device and the synergistic integration of these components to display detectable signals. This review explores the principle of LFIA for protein biomarkers, device components including biomaterials and labeling methods. Medical applications and commercial status are examined as well. This review highlights critical methodologies in the development of new LFIAs and their role in advancing healthcare worldwide.

Affinity-Based Analysis Methods for the Detection of Aminoglycoside Antibiotic Residues in Animal-Derived Foods: A Review

With the increasingly serious problem of aminoglycoside antibiotic residues, it is imperative to develop rapid, sensitive and efficient detection methods. This article reviews the detection methods of aminoglycoside antibiotics in animal-derived foods, including enzyme-linked immunosorbent assay, fluorescent immunoassay, chemical immunoassay, affinity sensing assay, lateral flow immunochromatography and molecular imprinted immunoassay. After evaluating the performance of these methods, the advantages and disadvantages were analyzed and compared. Furthermore, development prospects and research trends were proposed and summarized. This review can serve as a basis for further research and provide helpful references and new insights for the analysis of aminoglycoside residues. Accordingly, the in-depth investigation and analysis will certainly make great contributions to food safety, public hygiene and human health.

Carbon nanomaterial-based molecularly imprinted polymer sensors for detection of hazardous substances in food: recent progress and future trends

The presence of various harmful substances in food is significantly risky to human health. Therefore, simple, rapid, and selective food hazard analysis tools have become a focus of sensing research. At present, molecularly imprinted polymers (MIPs) have attracted more and more attention because of their easy preparation and high selectivity. Due to their simple preparation, low cost, large specific surface area, and high conductivity, carbon nanomaterial can be used as sensing substrate carriers. Therefore, the combination of carbon nanomaterial with MIPs has attracted great attention. This paper summarizes the development, composition, and preparation methods of MIPs, as well as the latest research progress in carbon nanomaterials for the detection of various food hazards using sensors. In addition, the practical applications of carbon nanomaterial-based MIP sensors, their current challenges and future trends, and the ongoing efforts devoted to developing new and efficient carbon nanomaterial-based MIP sensing platforms are also introduced.

Point-of-care community drug checking technologies: an insider look at the scientific principles and practical considerations

Drug checking is increasingly being explored outside of festivals and events to be an ongoing service within communities, frequently integrated within responses to illicit drug overdose. The choice of instrumentation is a common question, and the demands on these chemical analytical instruments can be challenging as illicit substances may be more complex and include highly potent ingredients at trace levels. The answer remains nuanced as the instruments themselves are not directly comparable nor are the local demands on the service, meaning implementation factors heavily influence the assessment and effectiveness of instruments. In this perspective, we provide a technical but accessible introduction to the background of a few common drug checking methods aimed at current and potential drug checking service providers. We discuss the following tools that have been used as part of the Vancouver Island Drug Checking Project in Victoria, Canada: immunoassay test strips, attenuated total reflection IR-absorption spectroscopy, Raman spectroscopy from powder samples, surface-enhanced Raman scattering in a solution of colloidal gold nanoparticles, and gas chromatography-mass spectrometry. Using four different drug mixtures received and tested at the service, we illustrate the strengths, limitations, and capabilities of such instruments, and expose the scientific theory to give further insight into their analytical results. Each case study provides a walk-through-style analysis for a practical comparison between data from several different instruments acquired on the same sample. Ideally, a single instrument would be able to achieve all of the objectives of drug checking. However, there is no clear instrument that ticks every box; low cost, portable, rapid, easy-to-use and provides highly sensitive identification and accurate quantification. Multi-instrument approaches to drug checking may be required to effectively respond to increasingly complex and highly potent substances demanding trace level detection and the potential for quantification.

A Novel Preanalytical Strategy Enabling Application of a Colorimetric Nanoaptasensor for On-Site Detection of AFB1 in Cattle Feed

Aflatoxin contamination of cattle feed is responsible for serious adverse effects on animal and human health. A number of approaches have been reported to determine aflatoxin B1 (AFB1) in a variety of feed samples using aptasensors. However, rapid analysis of AFB1 in these matrices remains to be addressed in light of the complexity of the preanalytical process. Herein we describe an optimization on the preanalytical stage to minimize the sample processing steps required to perform semi-quantitative colorimetric detection of AFB1 in cattle feed using a gold nanoparticle-based aptasensor (nano-aptasensor). The optical behavior of the nano-aptasensor was characterized in different organics solvents, with acetonitrile showing the least interference on the activity of the nan-aptasensor. This solvent was selected as the extractant agent for AFB1-containing feed, allowing for the first time, direct colorimetric detection from the crude extract (detection limit of 5 µg/kg). Overall, these results lend support to the application of this technology for the on-site detection of AFB1 in the dairy sector.

An Origami Paper-Based Biosensor for Allergen Detection by Chemiluminescence Immunoassay on Magnetic Microbeads

Food allergies are adverse health effects that arise from specific immune responses, occurring upon exposure to given foods, even if present in traces. Egg allergy is one of the most common food allergies, mainly caused by egg white proteins, with ovalbumin being the most abundant. As allergens can also be present in foodstuff due to unintended contamination, there is a need for analytical tools that are able to rapidly detect allergens in food products at the point-of-use. Herein, we report an origami paper-based device for detecting ovalbumin in food samples, based on a competitive immunoassay with chemiluminescence detection. In this biosensor, magnetic microbeads have been employed for easy and efficient immobilization of ovalbumin on paper. Immobilized ovalbumin competes with the ovalbumin present in the sample for a limited amount of enzyme-labelled anti-ovalbumin antibody. By exploiting the origami approach, a multistep analytical procedure could be performed using reagents preloaded on paper layers, thus providing a ready-to-use immunosensing platform. The assay provided a limit of detection (LOD) of about 1 ng mL^-1 for ovalbumin and, when tested on ovalbumin-spiked food matrices (chocolate chip cookies), demonstrated good assay specificity and accuracy, as compared with a commercial immunoassay kit.

Universal and ultrasensitive detection of foodborne bacteria on a lateral flow assay strip by using wheat germ agglutinin-modified magnetic SERS nanotags

Rapid, direct and sensitive detection of foodborne bacteria in complex samples is still challenging. Here, we reported a universal surface-enhanced Raman scattering (SERS)-based lateral flow assay (LFA) for highly sensitive detection of foodborne bacteria in food and environmental samples using wheat germ agglutinin (WGA)-modified Fe3O4@Au (Au@MNP-WGA) nanotags. The Au@MNP-WGA tag with numerous intraparticle hotspots was integrated into the LFA system for the first time, which can not only greatly improve the detection sensitivity through the dual amplification effect of magnetic enrichment and SERS enhancement but also achieve the broad-spectrum capture of multiple bacteria. In addition, monoclonal antibodies were separately immobilized onto the test line of different LFA strips to ensure the specific detection of different target pathogens. With this strategy, the proposed assay can achieve the universal and highly sensitive determination of three common foodborne bacteria, namely, Listeria monocytogenes, Campylobacter jejuni, and Staphylococcus aureus, with low detection limit (10 cells mL-1), short testing time (<35 min), and high reproducibility (RSD < 8.14%). Given its good stability and accuracy in complex samples, the Au@MNP-WGA-based SERS-LFA has great potential to be a powerful tool for the universal and on-site detection of different foodborne pathogens.

Facile preparation of uniform-sized covalent organic framework nanoflowers as versatile sample-pretreatment platforms for sensitive and specific determination of hazardous substances

Covalent-organic frameworks (COFs) have lately received extensive interest for their outstanding performance, especially to adsorption of hazards, while easy-preparation of uniform-sized COFs hold a great challenge. This research presented a simple synthesis method of flower-shaped COF (nanoflower) with strong hydrophobic surface at room temperature. Taking advantage of its easy-prepared and uniform-sized features, we proposed a versatile and efficient sample-pretreatment platform by employing the nanoflower COF for affinity adsorption of various hydrophobic biotoxins and further surface imprinting for selective enrichment of specific biotoxin (COF@MIP), respectively. The COF@MIP was integrating COF with molecular imprinting technique to achieve selective identification of sterigmatocystin (ST) with high specificity and sensitivity. They both exhibited well reusability, preserving 81% of initial activity after being used for six cycles. The as-prepared materials coupled with offline solid phase extraction (SPE) and high performance liquid chromatography (HPLC) were successfully applied to five common cereals with good recoveries in the range of 70.3-100.7%. Moreover, the principle of versatile sample pretreatment and detection platform based on the facile-prepared and uniform-sized COF nanoflower would be easily extended to other hazards. It provided a prospective approach for the pretreatment and determination of hazardous substances with low level in complex sample matrix.

Food traceability 4.0 as part of the fourth industrial revolution: key enabling technologies

Food Traceability 4.0 (FT 4.0) is about tracing foods in the era of the fourth industrial revolution (Industry 4.0) with techniques and technologies reflecting this new revolution. Interest in food traceability has gained momentum in response to, among others events, the outbreak of the COVID-19 pandemic, reinforcing the need for digital food traceability that prevents food fraud and provides reliable information about food. This review will briefly summarize the most common conventional methods available to determine food authenticity before highlighting examples of emerging techniques that can be used to combat food fraud and improve food traceability. A particular focus will be on the concept of FT 4.0 and the significant role of digital solutions and other relevant Industry 4.0 innovations in enhancing food traceability. Based on this review, a possible new research topic, namely FT 4.0, is encouraged to take advantage of the rapid digitalization and technological advances occurring in the era of Industry 4.0. The main FT 4.0 enablers are blockchain, the Internet of things, artificial intelligence, and big data. Digital technologies in the age of Industry 4.0 have significant potential to improve the way food is traced, decrease food waste and reduce vulnerability to fraud opening new opportunities to achieve smarter food traceability. Although most of these emerging technologies are still under development, it is anticipated that future research will overcome current limitations making large-scale applications possible.