Thermoelasticity of red blood cell membrane

Modelling lipid rafts formation through chemo-mechanical interplay triggered by receptor-ligand binding

Cell membranes, mediator of many biological mechanisms from adhesion and metabolism up to mutation and infection, are highly dynamic and heterogeneous environments exhibiting a strong coupling between biochemical events and structural re-organisation. This involves conformational changes induced, at lower scales, by lipid order transitions and by the micro-mechanical interplay of lipids with transmembrane proteins and molecular diffusion. Particular attention is focused on lipid rafts, ordered lipid microdomains rich of signalling proteins, that co-localise to enhance substance trafficking and activate different intracellular biochemical pathways. In this framework, the theoretical modelling of the dynamic clustering of lipid rafts implies a full multiphysics coupling between the kinetics of phase changes and the mechanical work performed by transmembrane proteins on lipids, involving the bilayer elasticity. This mechanism produces complex interspecific dynamics in which membrane stresses and chemical potentials do compete by determining different morphological arrangements, alteration in diffusive walkways and coalescence phenomena, with a consequent influence on both signalling potential and intracellular processes. Therefore, after identifying the leading chemo-mechanical interactions, the present work investigates from a modelling perspective the spatio-temporal evolution of raft domains to theoretically explain co-localisation and synergy between proteins' activation and raft formation, by coupling diffusive and mechanical phenomena to observe different morphological patterns and clustering of ordered lipids. This could help to gain new insights into the remodelling of cell membranes and could potentially suggest mechanically based strategies to control their selectivity, by orienting intracellular functions and mechanotransduction.

Mechanotransduction through membrane tension: It's all about propagation?

Over the past 25 years, membrane tension has emerged as a primary mechanical factor influencing cell behavior. Although supporting evidences are accumulating, the integration of this parameter in the lifecycle of cells, organs, and tissues is complex. The plasma membrane is envisioned as a bilayer continuum acting as a 2D fluid. However, it possesses almost infinite combinations of proteins, lipids, and glycans that establish interactions with the extracellular or intracellular environments. This results in a tridimensional composite material with non-trivial dynamics and physics, and the task of integrating membrane mechanics and cellular outcome is a daunting chore for biologists. In light of the most recent discoveries, we aim in this review to provide non-specialist readers some tips on how to solve this conundrum.

Physical mechanisms of red blood cell splenic filtration

The splenic interendothelial slits fulfill the essential function of continuously filtering red blood cells (RBCs) from the bloodstream to eliminate abnormal and aged cells. To date, the process by which 8 [Formula: see text]m RBCs pass through 0.3 [Formula: see text]m-wide slits remains enigmatic. Does the slit caliber increase during RBC passage as sometimes suggested? Here, we elucidated the mechanisms that govern the RBC retention or passage dynamics in slits by combining multiscale modeling, live imaging, and microfluidic experiments on an original device with submicron-wide physiologically calibrated slits. We observed that healthy RBCs pass through 0.28 [Formula: see text]m-wide rigid slits at 37 °C. To achieve this feat, they must meet two requirements. Geometrically, their surface area-to-volume ratio must be compatible with a shape in two tether-connected equal spheres. Mechanically, the cells with a low surface area-to-volume ratio (28% of RBCs in a 0.4 [Formula: see text]m-wide slit) must locally unfold their spectrin cytoskeleton inside the slit. In contrast, activation of the mechanosensitive PIEZO1 channel is not required. The RBC transit time through the slits follows a [Formula: see text]1 and [Formula: see text]3 power law with in-slit pressure drop and slip width, respectively. This law is similar to that of a Newtonian fluid in a two-dimensional Poiseuille flow, showing that the dynamics of RBCs is controlled by their cytoplasmic viscosity. Altogether, our results show that filtration through submicron-wide slits is possible without further slit opening. Furthermore, our approach addresses the critical need for in vitro evaluation of splenic clearance of diseased or engineered RBCs for transfusion and drug delivery.

Dynamic photodamage of red blood cell induced by CisDiMPyP porphyrin

It is well-known that oxidative damage in red blood cell (RBC) usually causes morphological changes and increased membrane rigidity. Although many studies have focused on investigating how RBC responds to a photodynamic stimulus, the intermediate steps between membrane damage and hemolysis are not reported. To give a comprehensive insight into changes of RBC membrane property under different oxidative damage levels, we employed the photoactivation of CisDiMPyP porphyrin that primarily generates singlet oxygen ¹O₂ as oxidant species. We found that there were distinguishable characteristic damages depending on the ¹O₂ flux over the membrane, in a way that each impact of photooxidative damage was categorized under three damage levels: mild (maintaining the membrane morphology and elasticity), moderate (membrane elongation and increased membrane elasticity) and severe (wrinkle-like deformation and hemolysis). When sodium azide (NaN₃) was used as a singlet oxygen quencher, delayed cell membrane alterations and hemolysis were detected. The delay times showed that ¹O₂ indeed plays a key role that causes RBC photooxidation by CisDiMPyP. We suggest that the sequence of morphological changes (RBC discoid area expansion, wrinkle-like patterns, and hemolysis) under photooxidative damage occurs due to damage to the lipid membrane and cytoskeletal network proteins.

PLSCR1 is a cell-autonomous defence factor against SARS-CoV-2 infection

Understanding protective immunity to COVID-19 facilitates preparedness for future pandemics and combats new SARS-CoV-2 variants emerging in the human population. Neutralizing antibodies have been widely studied; however, on the basis of large-scale exome sequencing of protected versus severely ill patients with COVID-19, local cell-autonomous defence is also crucial1-4. Here we identify phospholipid scramblase 1 (PLSCR1) as a potent cell-autonomous restriction factor against live SARS-CoV-2 infection in parallel genome-wide CRISPR-Cas9 screens of human lung epithelia and hepatocytes before and after stimulation with interferon-γ (IFNγ). IFNγ-induced PLSCR1 not only restricted SARS-CoV-2 USA-WA1/2020, but was also effective against the Delta B.1.617.2 and Omicron BA.1 lineages. Its robust activity extended to other highly pathogenic coronaviruses, was functionally conserved in bats and mice, and interfered with the uptake of SARS-CoV-2 in both the endocytic and the TMPRSS2-dependent fusion routes. Whole-cell 4Pi single-molecule switching nanoscopy together with bipartite nano-reporter assays found that PLSCR1 directly targeted SARS-CoV-2-containing vesicles to prevent spike-mediated fusion and viral escape. A PLSCR1 C-terminal β-barrel domain-but not lipid scramblase activity-was essential for this fusogenic blockade. Our mechanistic studies, together with reports that COVID-associated PLSCR1 mutations are found in some susceptible people3,4, identify an anti-coronavirus protein that interferes at a late entry step before viral RNA is released into the host-cell cytosol.

Competition between deformation and free volume quantified by 3D image analysis of red blood cell

Cells in living organisms are subjected to mechanical strains caused by external forces like overcrowding, resulting in strong deformations that affect cell function. We study the interplay between deformation and crowding of red blood cells (RBCs) in dispersions of nonabsorbing rod-like viruses. We identify a sequence of configurational transitions of RBC doublets, including configurations that can only be induced by long-ranged attraction: highly fluctuating T-shaped and face-to-face configurations at low, and doublets approaching a complete spherical configuration at high, rod concentrations. Complementary simulations are used to explore different energy contributions to deformation as well as the stability of RBC doublet configurations. Our advanced analysis of 3D reconstructed confocal images of RBC doublets quantifies the depletion interaction and the resulting deformation energy. Thus, we introduce a noninvasive, high-throughput platform that is generally applicable to investigate the mechanical response of biological cells to external forces and characterize their mechanical properties.

A mathematical model of fibrinogen-mediated erythrocyte-erythrocyte adhesion

Erythrocytes are deformable cells that undergo progressive biophysical and biochemical changes affecting the normal blood flow. Fibrinogen, one of the most abundant plasma proteins, is a primary determinant for changes in haemorheological properties, and a major independent risk factor for cardiovascular diseases. In this study, the adhesion between human erythrocytes is measured by atomic force microscopy (AFM) and its effect observed by micropipette aspiration technique, in the absence and presence of fibrinogen. These experimental data are then used in the development of a mathematical model to examine the biomedical relevant interaction between two erythrocytes. Our designed mathematical model is able to explore the erythrocyte-erythrocyte adhesion forces and changes in erythrocyte morphology. AFM erythrocyte-erythrocyte adhesion data show that the work and detachment force necessary to overcome the adhesion between two erythrocytes increase in the presence of fibrinogen. The changes in erythrocyte morphology, the strong cell-cell adhesion and the slow separation of the two cells are successfully followed in the mathematical simulation. Erythrocyte-erythrocyte adhesion forces and energies are quantified and matched with experimental data. The changes observed on erythrocyte-erythrocyte interactions may give important insights about the pathophysiological relevance of fibrinogen and erythrocyte aggregation in hindering microcirculatory blood flow.

Effect of constitutive law on the erythrocyte membrane response to large strains

Three constitutive laws, that is the Skalak, neo-Hookean and Yeoh laws, commonly employed for describing the erythrocyte membrane mechanics are theoretically analyzed and numerically investigated to assess their accuracy for capturing erythrocyte deformation characteristics and morphology. Particular emphasis is given to the nonlinear deformation regime, where it is known that the discrepancies between constitutive laws are most prominent. Hence, the experiments of optical tweezers and micropipette aspiration are considered here, for which relationships between the individual shear elastic moduli of the constitutive laws can also be established through analysis of the tension-deformation relationship. All constitutive laws were found to adequately predict the axial and transverse deformations of a red blood cell subjected to stretching with optical tweezers for a constant shear elastic modulus value. As opposed to Skalak law, the neo-Hookean and Yeoh laws replicated the erythrocyte membrane folding, that has been experimentally observed, with the trade-off of sustaining significant area variations. For the micropipette aspiration, the suction pressure-aspiration length relationship could be excellently predicted for a fixed shear elastic modulus value only when Yeoh law was considered. Importantly, the neo-Hookean and Yeoh laws reproduced the membrane wrinkling at suction pressures close to those experimentally measured. None of the constitutive laws suffered from membrane area compressibility in the micropipette aspiration case.

Dynamic response of red blood cells in health and disease

The viscoelastic response of the red blood cells (RBCs) affected by hematological disorders become severely impaired by the altered biophysical and morphological properties. These include traits like reduced deformability, increased membrane viscosity, and change in cell shape, causing substantial changes in the overall hemodynamics. RBCs, by virtue of their highly elastic membrane and low bending rigidity, exhibit complex dynamics when exposed to cyclic, transient forces in the microcirculation. Here, we employ mesoscopic numerical simulations based on the dissipative particle dynamics (DPD) framework to explore the dynamics of healthy, schizont stage malaria-infected and type 2 diabetes mellitus affected RBCs subjected to external time-dependent loads. The paper focuses on the imposition and cessation of external forcing on the cells of two different typologies, saw-tooth cyclic wave loading and sudden loads in the form of creep and relaxation phenomena. The effects of varying the rate of stress and the applied stress magnitude were investigated. Our simulations disclosed unique shape transitions of the hysteresis curves at varied loading rates. A careful analysis reveals a critical threshold of half cycle time of the from wherein the deformation of all cells observed, healthy or otherwise, falls under the nearly reversible deformation regime displaying minimal energy dissipation. Finally, we also examined the individual effects of the different constitutive and geometric characteristics attributed to the pathological cells and observed interesting recovery dynamics of spherocytes and cells having high shear moduli. The distinguished deformation behaviour of healthy and diseased cells could establish external force as a valuable initial biomarker.

Numerical investigation of two-microbubble collapse and cell deformation in an ultrasonic field

Two-microbubble collapse near a spherical cell in an ultrasonic field is numerically analyzed by extending a level-set method for compressible multiphase flows with bubble and cell multiple interfaces. Computations performed with different bubble-bubble distances and size ratios demonstrate various bubble-bubble interactions, such as bubble coalescence, bubble repulsion and attraction, jet penetration into the bubble, and jet collision. The interactions between collapsing bubbles are found to produce strong liquid jet formation and result in significant cell deformation compared to single-bubble collapse. The optimal bubble-bubble distance and size ratio for cell deformation are presented via contour maps based on extensive computations. The influences of the ultrasonic amplitude and frequency on cell deformation are further investigated.

Evidence for a transition in the cortical membranes of Paramecium

Ever since the pioneering studies in the 1960s and 70s, the importance of order transitions for cell membrane functions has remained a matter of debate. Recently, it has been proposed that the nonlinear stimulus-response curve of excitable cells, which manifests in all-or-none pulses (action potentials (AP)), is due to a transition in the cell membrane. Indeed, evidence for transitions has accumulated in plant cells and neurons, but studies with other excitable cells are expedient in order to show if this finding is of a general nature. Herein, we investigated intact, motile specimens of the "swimming neuron" Paramecium. The cellular membranes were labelled with the solvatochromic fluorophores LAURDAN or Di-4-ANEPPDHQ. Subsequently, a cell was trapped in a microfluidic channel and investigated by fluorescence spectroscopy. The generalized polarization (GP) of the fluorescence emission from cell cortical membranes (probably plasma and alveolar membranes) was extracted by an edge-finding algorithm. The thermo-optical state diagram, i.e. the dependence of GP on temperature, exhibited clear indications for a reversible transition. This transition had a width of ~10-15 °C and a midpoint that was located ~4 °C below the growth temperature. The state diagrams with LAURDAN and Di-4-ANEPPDHQ had widely identical characteristics. These results suggested that the cortical membranes of Paramecium reside in an order transition regime under physiological growth conditions. Based on these findings, membrane potential fluctuations, spontaneous depolarizing spikes, and thermal excitation of Paramecium was interpreted.

Emerging Diamond Quantum Sensing in Bio-Membranes

Bio-membranes exhibit complex but unique mechanical properties as communicative regulators in various physiological and pathological processes. Exposed to a dynamic micro-environment, bio-membranes can be seen as an intricate and delicate system. The systematical modeling and detection of their local physical properties are often difficult to achieve, both quantitatively and precisely. The recent emerging diamonds hosting quantum defects (i.e., nitrogen-vacancy (NV) center) demonstrate intriguing optical and spin properties, together with their outstanding photostability and biocompatibility, rendering them ideal candidates for biological applications. Notably, the extraordinary spin-based sensing enable the measurements of localized nanoscale physical quantities such as magnetic fields, electrical fields, temperature, and strain. These nanoscale signals can be optically read out precisely by simple optical microscopy systems. Given these exclusive properties, NV-center-based quantum sensors can be widely applied in exploring bio-membrane-related features and the communicative chemical reaction processes. This review mainly focuses on NV-based quantum sensing in bio-membrane fields. The attempts of applying NV-based quantum sensors in bio-membranes to investigate diverse physical and chemical events such as membrane elasticity, phase change, nanoscale bio-physical signals, and free radical formation are fully overviewed. We also discuss the challenges and future directions of this novel technology to be utilized in bio-membranes.

Mechanical role of the submembrane spectrin scaffold in red blood cells and neurons

Spectrins are large, evolutionarily well-conserved proteins that form highly organized scaffolds on the inner surface of eukaryotic cells. Their organization in different cell types or cellular compartments helps cells withstand mechanical challenges with unique strategies depending on the cell type. This Review discusses our understanding of the mechanical properties of spectrins, their very distinct organization in red blood cells and neurons as two examples, and the contribution of the scaffolds they form to the mechanical properties of these cells.

Label-Free Quantification of Molecular Interaction in Live Red Blood Cells by Tracking Nanometer Scale Membrane Fluctuations

Molecular interactions in live cells play an important role in both cellular functions and drug discovery. Current methods for measuring binding kinetics involve extracting the membrane protein and labeling, while the in situ quantification of molecular interaction with surface plasmon resonance (SPR) imaging mainly worked with fixed cells due to the micro-motion related noises of live cells. Here, an optical imaging method is presented to measure the molecular interaction with live red blood cells by tracking the nanometer membrane fluctuations. The membrane fluctuation dynamics are measured by tracking the membrane displacement during glycoprotein interaction. The data are analyzed with a thermodynamic model to determine the elastic properties of the cell observing reduced membrane fluctuations under fixatives, indicating cell fixations affect membrane mechanical properties. The binding kinetics of glycoprotein to several lectins are obtained by tracking the membrane fluctuation amplitude changes on single live cells. The binding kinetics and strength of different lectins are quite different, indicating the glycoproteins expression heterogeneity in single cells. It is anticipated that the method will contribute to the understanding of mechanisms of cell interaction and communication, and have potential applications in the mechanical assessment of cancer or other diseases at the single-cell level, and screening of membrane protein targeting drugs.

The Shape of Human Red Blood Cells Suspended in Autologous Plasma and Serum

(1) Background: In almost all studies of the shape of the human red blood cell (RBC), the suspending medium was a salt solution supplemented with albumin. However, the ratio of thickness across the dimple region to the thickness of the rim (THR) depends on the albumin concentration. Values of the THR in the literature range from 0.27 to 0.627 whereas in the present work it was 0.550 or 0.601 whether measured in plasma or serum. (2) Methods: 9911 RBCs of eight donors were suspended in autologous plasma or serum. Sedimented RBCs were observed under bright field illumination at 416 nm. From the profiles of gray value, the THR was determined. (3) Results: The THR displays a wide distribution within a single blood sample. A direct correlation of THR and spontaneous curvature of the membrane is likely. The variation of the mean THR between different donors is large. The aspect ratio of RBCs viewed face-on ranged on average from 1 to 1.48. In oval RBCs, the rim is thicker along the major axis than along the minor axis, an effect increasing with increasing aspect ratio. Remodeling of the membrane skeleton occurs in vivo with a characteristic time (τ) on the order of 1 h. (4) Conclusions: Consideration of these data in models of RBC behavior might improve the agreement with observations. τ≈1 h suggests a more general type of reference configuration of the membrane skeleton than a stress free shape.

Technologies for measuring red blood cell deformability

Human red blood cells (RBCs) are approximately 8 μm in diameter, but must repeatedly deform through capillaries as small as 2 μm in order to deliver oxygen to all parts of the body. The loss of this capability is associated with the pathology of many diseases, and is therefore a potential biomarker for disease status and treatment efficacy. Measuring RBC deformability is a difficult problem because of the minute forces (∼pN) that must be exerted on these cells, as well as the requirements for throughput and multiplexing. The development of technologies for measuring RBC deformability date back to the 1960s with the development of micropipette aspiration, ektacytometry, and the cell transit analyzer. In the past 10 years, significant progress has been made using microfluidics by leveraging the ability to precisely control fluid flow through microstructures at the size scale of individual RBCs. These technologies have now surpassed traditional methods in terms of sensitivity, throughput, consistency, and ease of use. As a result, these efforts are beginning to move beyond feasibility studies and into applications to enable biomedical discoveries. In this review, we provide an overview of both traditional and microfluidic techniques for measuring RBC deformability. We discuss the capabilities of each technique and compare their sensitivity, throughput, and robustness in measuring bulk and single-cell RBC deformability. Finally, we discuss how these tools could be used to measure changes in RBC deformability in the context of various applications including pathologies caused by malaria and hemoglobinopathies, as well as degradation during storage in blood bags prior to blood transfusions.

Development of Mechanical Stability in Late-Stage Embryonic Erythroid Cells: Insights From Fluorescence Imaged Micro-Deformation Studies

The combined use of fluorescence labeling and micro-manipulation of red blood cells has proven to be a powerful tool for understanding and characterizing fundamental mechanisms underlying the mechanical behavior of cells. Here we used this approach to study the development of the membrane-associated cytoskeleton (MAS) in primary embryonic erythroid cells. Erythropoiesis comes in two forms in the mammalian embryo, primitive and definitive, characterized by intra- and extra-vascular maturation, respectively. Primitive erythroid precursors in the murine embryo first begin to circulate at embryonic day (E) 8.25 and mature as a semi-synchronous cohort before enucleating between E12.5 and E16.5. Previously, we determined that the major components of the MAS become localized to the membrane between E10.5 and E12.5, and that this localization is associated with an increase in membrane mechanical stability over this same period. The change in mechanical stability was reflected in the creation of MAS-free regions of the membrane at the tips of the projections formed when cells were aspirated into micropipettes. The tendency to form MAS-free regions decreases as primitive erythroid cells continue to mature through E14.5, at least 2 days after all detectable cytoskeletal components are localized to the membrane, indicating continued strengthening of membrane cohesion after membrane localization of cytoskeletal components. Here we demonstrate that the formation of MAS-free regions is the result of a mechanical failure within the MAS, and not the detachment of membrane bilayer from the MAS. Once a "hole" is formed in the MAS, the skeletal network contracts laterally along the aspirated projection to form the MAS-free region. In protein 4.1-null primitive erythroid cells, the tendency to form MAS-free regions is markedly enhanced. Of note, similar MAS-free regions were observed in maturing erythroid cells from human marrow, indicating that similar processes occur in definitive erythroid cells. We conclude that localization of cytoskeletal components to the cell membrane of mammalian erythroid cells during maturation is insufficient by itself to produce a mature MAS, but that subsequent processes are additionally required to strengthen intraskeletal interactions.

Ligand Decorated Primaquine Loaded Nanocarriers for Liver Targeting for Triggered Anti-Malarial Activity

OBJECTIVE

The aim of the current research is to formulate a nano delivery system for effective delivery of primaquine for liver targeting to achieve the potential anti-malarial activity. Another objective of current development is to formulate a lactobionic acid conjugated polyphosphazene based nano delivery of primaquine for liver targeting to distinguish anti-malarial activity.

METHOD

The particle size, entrapment efficiency, in-vitro drug release pattern, hepatotoxicity, MTT assay, erythrocyte toxicity assay, histopathology study, HepG2 cell uptake study, anti-- malarial study, and organ-distribution was also carried out to estimate the activity and potential features of a nanoparticle system.

RESULTS

The results obtained from the above analysis justify the efficiency and effectiveness of the system. The NMR studies confirm the conjugation pattern and the TEM represents the spherical morphological features of nanoparticles. The controlled release pattern from the in-vitro release study was observed and found to be 73.25% of drug release in 20 hrs and in the nano-size range (61.6± 1.56 nm) by particle size analysis.SGOT level, SGPT, ALP, and Parasitemia level of optimized drug-loaded PEGylated lactobionic acid conjugated polyphosphazene derivatized nanoparticles (FF) was found to lie in the safe range, showing that the formulation is non-toxic to the liver. Primaquine drug-loaded PEGylated lactobionic acid conjugated polyphosphazene polymeric nanoparticles showed higher cell uptake on HepG2 cell lines as compared to the drug-loaded in PEGylated polyphosphazene polymeric nanoparticles and plain drug.Percentage cell viability of drugloaded PEGylated lactobionic acid conjugated polyphosphazene derivatized nanoparticles was decreased by enhancing the concentration of prepared nanoparticle system accessed by MTT assay.

CONCLUSION

From the studies, it can be concluded that the optimized formulation of drug-loaded PEGylated lactobionic acid conjugated polyphosphazene derivatized nanoparticles showed high liver targeting, least toxicity to the liver, controlled release of the drug, higher anti-malarial activity against hepatocytes at a low dose, more effectiveness, and can be treated as a potential candidate for anti-malarial therapy.

Relationship between Viscosity and Acyl Tail Dynamics in Lipid Bilayers

Membrane viscosity is a fundamental property that controls molecular transport and structural rearrangements in lipid membranes. Given its importance in many cell processes, various experimental and computational methods have been developed to measure the membrane viscosity, yet the estimated values depend highly on the method and vary by orders of magnitude. Here we investigate the molecular origins of membrane viscosity by measuring the nanoscale dynamics of the lipid acyl tails using x-ray and neutron spectroscopy techniques. The results show that the membrane viscosity can be estimated from the structural relaxation times of the lipid tails.

Elucidating Axonal Injuries Through Molecular Modelling of Myelin Sheaths and Nodes of Ranvier

Around half of the traumatic brain injuries are thought to be axonal damage. Disruption of the cellular membranes, or alternatively cytoskeletal damage has been suggested as possible injury trigger. Here, we have used molecular models to have a better insight on the structural and mechanical properties of axon sub-cellular components. We modelled myelin sheath and node of Ranvier as lipid bilayers at a coarse grained level. We built ex-novo a model for the myelin. Lipid composition and lipid saturation were based on the available experimental data. The model contains 17 different types of lipids, distributed asymmetrically between two leaflets. Molecular dynamics simulations were performed to characterize the myelin and node-of-Ranvier bilayers at equilibrium and under deformation and compared to previous axolemma simulations. We found that the myelin bilayer has a slightly higher area compressibility modulus and higher rupture strain than node of Ranvier. Compared to the axolemma in unmyelinated axon, mechanoporation occurs at 50% higher strain in the myelin and at 23% lower strain in the node of Ranvier in myelinated axon. Combining the results with finite element simulations of the axon, we hypothesizes that myelin does not rupture at the thresholds proposed in the literature for axonal injury while rupture may occur at the node of Ranvier. The findings contribute to increases our knowledge of axonal sub-cellular components and help to understand better the mechanism behind axonal brain injury.

Effect of cell geometry in the evaluation of erythrocyte viscoelastic properties

The red blood cell membrane-cytoskeleton is a complex structure mainly responsible for giving the cell rigidity and shape. It also provides the erythrocyte with the ability to pass through narrow capillaries of the vertebrate blood circulatory system. Although the red blood cell viscoelastic properties have been extensively studied, reported experimental data differ by up to three orders of magnitude. This could be attributed to the natural cell variability, to the different techniques employed, and also to the models used for the cell response, which are highly dependent on cell geometry. Here, we use two methodologies based on optical tweezers to investigate the viscoelastic behavior of healthy human red blood cells, one applying small cell deformations (microrheology) and another imposing large deformations (tether extraction). We also establish a defocusing microscopy-based method to characterize the cell geometry and thus the erythrocyte form factor, an essential parameter that allows comparisons among the viscoelastic properties at different conditions. Moreover, for small deformations, a soft glassy rheology model is used to discuss the results, while for large deformations two surface shear moduli and one surface viscosity are determined, together with the surface tension and bending modulus of the erythrocyte membrane lipid component. We also show that F-actin is not detected in tethers, although the erythrocyte membrane has physical properties like those of other adherent cells, known to have tethers containing F-actin inside. Altogether, our results show good agreement with the reported literature and we argue that, to properly compare the viscoelastic properties of red blood cells in different situations, the task of cell geometry characterization must be accomplished. This may be especially important when the influence of agents, like the malaria parasite, induces changes in both the geometry and chemical constituents of the erythrocyte membrane. Together, the new methodologies and procedures used in this study would allow the erythrocyte community to better explore the mechanical behavior of red blood cells and may be useful to characterize erythrocyte viscoelasticity changes in several blood diseases.

Geometrically induced localization of flexural waves on thin warped physical membranes

We consider the propagation of flexural waves across a nearly flat, thin membrane, whose stress-free state is curved. The stress-free configuration is specified by a quenched height field, whose Fourier components are drawn from a Gaussian distribution with power-law variance. Gaussian curvature couples the in-plane stretching to out-of-plane bending. Integrating out the faster stretching modes yields a wave equation for undulations in the presence of an effective random potential, determined purely by geometry. We show that at long times and lengths, the undulation intensity obeys a diffusion equation. The diffusion coefficient is found to be frequency dependent and sensitive to the quenched height field distribution. Finally, we consider the effect of coherent backscattering corrections, yielding a weak localization correction that decreases the diffusion coefficient proportional to the logarithm of the system size, and induces a localization transition at large amplitude of the quenched height field. The localization transition is confirmed via a self-consistent extension to the strong disorder regime.

Molecular rotors as intracellular probes of red blood cell stiffness

The deformability of red blood cells is an essential parameter that controls the rheology of blood as well as its circulation in the body. Characterizing the rigidity of the cells and their heterogeneity in a blood sample is thus a key point in the understanding of occlusive phenomena, particularly in the case of erythrocytic diseases in which healthy cells coexist with pathological cells. However, measuring intracellular rheology in small biological compartments requires the development of specific techniques. We propose a technique based on molecular rotors - viscosity-sensitive fluorescent probes - to evaluate the above key point. DASPI molecular rotor has been identified with spectral fluorescence properties decoupled from those of hemoglobin, the main component of the cytosol. After validation of the rotor as a viscosity probe in model fluids, we showed by confocal microscopy that, in addition to binding to the membrane, the rotor penetrates spontaneously and uniformly into red blood cells. Experiments on red blood cells whose rigidity is varied with temperature, show that molecular rotors can detect variations in their overall rigidity. A simple model allowed us to separate the contribution of the cytosol from that of the membrane, allowing a qualitative determination of the variation of cytosol viscosity with temperature, consistent with independent measurements of the viscosity of hemoglobin solutions. Our experiments show that the rotor can be used to study the intracellular rheology of red blood cells at the cellular level, as well as the heterogeneity of this stiffness in a blood sample. This opens up new possibilities for biomedical applications, diagnosis and disease monitoring.

Numerical Investigation of the Dynamical Behavior of a Fluid-Filled Microparticle Suspended in Human Arteriole

The study of artificial microparticles (capsules and vesicles) has gained a growing interest with the emergence of bio-engineering. One of their promoting applications is their use as therapeutic vectors for drug delivery, when capsules and vesicles release their capacity in a targeted environment. The dynamic behavior of capsules and vesicles in confined or unbounded flows was widely studied in the literature and their mechanical response was truthfully described using constitutive laws with good agreement with experiences. However, in a context of biological application, to our knowledge, none of published studies investigating the mechanical response of deformable microparticle took into account the real physiological conditions: the rheological properties of blood such as carrying fluid and the mechanical properties of blood vessels. In this paper, we consider a hyperelastic microparticle suspended in human arteriole. We investigate the deformation of the microparticle resulting from its interaction with blood flow and the arteriolar wall using various capillary numbers and respecting physiological properties of blood and arterial wall. The influence of the blood viscosity model (Newtonian versus shear thinning) is investigated and a comparison with a rigid microchannel and a muscle-embedded arteriole is carried out. The fluid structure interaction (FSI) problem is solved using arbitrary Lagrangian Eulerian (ALE) method. Our simulations have revealed that the arteriolar wall distensibility deeply influences both the deformation and velocity of the microparticle: the deformation strongly increases while the velocity decreases in comparison to an infinitely rigid wall. In the context of therapeutic procedure of targeted drug-delivery, a particular attention should be addressed to these observations, in particular for their implication in the burst mechanism.

Effects of curvature on the propagation of undulatory waves in lower dimensional elastic materials

The mechanics of lower dimensional elastic structures depends strongly on the geometry of their stress-free state. Elastic deformations separate into in-plane stretching and lower energy out-of-plane bending deformations. For elastic structures with a curved stress-free state, these two elastic modes are coupled within linear elasticity. We investigate the effect of that curvature-induced coupling on wave propagation in lower dimensional elastic structures, focusing on the simplest example-a curved elastic rod in two dimensions. We focus only on the geometry-induced coupling between bending and longitudinal (in-plane) strain that is common to both rods in two dimensions and to elastic shells. We find that the dispersion relation of the waves becomes gapped in the presence of finite curvature; bending modes are absent below a frequency proportional to the curvature of the rod. By studying the scattering of undulatory waves off regions of uniform curvature, we find that undulatory waves with frequencies in the gap associated with the curved region tunnel through that curved region via conversion into compression waves. These results should be directly applicable to the spectrum and spatial distribution of phonon modes in a number of curved rod-like elastic solids, including carbon nanotubes and biopolymer filaments.

Endophilin recruitment drives membrane curvature generation through coincidence detection of GPCR loop interactions and negative lipid charge

Endophilin plays key roles during endocytosis of cellular receptors, including generating membrane curvature to drive internalization. Electrostatic interactions between endophilin's BIN/Amphiphysin/Rvs domain and anionic membrane lipids have been considered the major driving force in curvature generation. However, the SH3 domain of endophilin also interacts with the proline-rich third intracellular loop (TIL) of various G-protein-coupled receptors (GPCRs), and it is unclear whether this interaction has a direct role in generating membrane curvature during endocytosis. To examine this, we designed model membranes with a membrane density of 1400 receptors per μm2 represented by a covalently conjugated TIL region from the β1-adrenergic receptor. We observed that TIL recruits endophilin to membranes composed of 95 mol% of zwitterionic lipids via the SH3 domain. More importantly, endophilin recruited via TIL tubulates vesicles and gets sorted onto highly curved membrane tubules. These observations indicate that the cellular membrane bending and curvature sensing activities of endophilin can be facilitated through detection of the TIL of activated GPCRs in addition to binding to anionic lipids. Furthermore, we show that TIL electrostatically interacts with membranes composed of anionic lipids. Therefore, anionic lipids can modulate TIL/SH3 domain binding. Overall, our findings imply that an interplay between TIL, charged membrane lipids, BAR domain, and SH3 domain could exist in the biological system and that these components may act in coordination to regulate the internalization of cellular receptors.

Constitutive Model of Erythrocyte Membranes with Distributions of Spectrin Orientations and Lengths

We present an analytical hyperelastic constitutive model of the red blood cell (erythrocyte) membrane based on recently improved characterizations of density and microscopic structure of its spectrin network from proteomics and cryo-electron tomography. The model includes distributions of both orientations and natural lengths of spectrin and updated copy numbers of proteins. By applying finite deformation to the spectrin network, we obtain the total free energy and stresses in terms of invariants of shear and area deformation. We generalize an expression of the initial shear modulus, which is independent of the number of molecular orientations within the network and also derive a simplified version of the model. We apply the model and its simplified version to analyze micropipette aspiration computationally and analytically and explore the effect of local cytoskeletal density change. We also explore the discrepancies among shear modulus values measured using different experimental techniques reported in the literature. We find that the model exhibits hardening behavior and can explain many of these discrepancies. Moreover, we find that the distribution of natural lengths plays a crucial role in the hardening behavior when the correct copy numbers of proteins are used. The initial shear modulus values we obtain using our current model (5.9-15.6 pN/μm) are close to the early estimates (6-9 pN/μm). This new, to our knowledge, constitutive model establishes a direct connection between the molecular structure of spectrin networks and constitutive laws and also defines a new picture of a much denser spectrin network than assumed in prior studies.

Cell Softness Prevents Cytolytic T-cell Killing of Tumor-Repopulating Cells

Biomechanics is a fundamental feature of a cell. However, the manner by which actomysin tension affects tumor immune evasion remains unclear. Here we show that although cytotoxic T lymphocytes (CTL) can effectively destroy stiff differentiated tumor cells, they fail to kill soft tumor-repopulating cells (TRC). TRC softness prevented membrane pore formation caused by CTL-released perforin. Perforin interacting with nonmuscle myosin heavy-chain 9 transmitted forces to less F-actins in soft TRC, thus generating an inadequate contractile force for perforin pore formation. Stiffening TRC allowed perforin the ability to drill through the membrane, leading to CTL-mediated killing of TRC. Importantly, overcoming mechanical softness in human TRC also enhanced TRC cell death caused by human CTL, potentiating a mechanics-based immunotherapeutic strategy. These findings reveal a mechanics-mediated tumor immune evasion, thus potentially providing an alternative approach for tumor immunotherapy. SIGNIFICANCE: Tumor-repopulating cells evade CD8⁺ cytolytic T-cell killing through a mechanical softness mechanism, underlying the impediment of perforin pore formation at the immune synapse site.

Cellular Membranes, a Versatile Adaptive Composite Material

Cellular membranes belong to the most vital yet least understood biomaterials of live matter. For instance, its biomechanical requirements substantially vary across species and subcellular sites, raising the question how membranes manage to adjust to such dramatic changes. Central to its adaptability at the cell surface is the interplay between the plasma membrane and the adjacent cell cortex, forming an adaptive composite material that dynamically adjusts its mechanical properties. Using a hypothetical composite material, we identify core challenges, and discuss how cellular membranes solved these tasks. We further muse how pathological changes in material properties affect membrane mechanics and cell function, before closing with open questions and future challenges arising when studying cellular membranes.

Mechanical Tension of Biomembranes Can Be Measured by Super Resolution (STED) Microscopy of Force-Induced Nanotubes

Membrane tension modulates the morphology of plasma-membrane tubular protrusions in cells but is difficult to measure. Here, we propose to use microscopy imaging to assess the membrane tension. We report direct measurement of membrane nanotube diameters with unprecedented resolution using stimulated emission depletion (STED) microscopy. For this purpose, we integrated an optical tweezers setup in a commercial microscope equipped for STED imaging and established micropipette aspiration of giant vesicles. Membrane nanotubes were pulled from the vesicles at specific membrane tension imposed by the aspiration pipet. Tube diameters calculated from the applied tension using the membrane curvature elasticity model are in excellent agreement with data measured directly with STED. Our approach can be extended to cellular membranes and will then allow us to estimate the mechanical membrane tension within the force-induced nanotubes.

Dual shape recovery of red blood cells flowing out of a microfluidic constriction

Micropipette aspiration, optical tweezers, rheometry, or ecktacytometry have been used to study the shape recovery of healthy human Red Blood Cells (RBCs) and measure associated relaxation times of the order of 100-300 ms. These measurements are in good agreement with the Kelvin-Voigt model, which describes the cell as a visco-elastic material, predicting that its relaxation time only depends on cell intrinsic properties. However, such mechanical solicitation techniques are far from being relevant regarding RBC solicitation in vivo. In this paper, we report for the first time the existence of two different behaviors of the RBC shape recovery while flowing out of a microfluidic constricted channel. The calculation of the viscous stress corresponding to the frontier between the two recovery modes confirms that the RBC resistance to shear μ is the elastic property dominating the transition between the two recovery behaviors. We also quantified associated recovery times τ r and report values as low as 4 ms-which is almost two decades smaller than the typical RBC relaxation time-at high viscosity and flow velocity of the carrier fluid. Although we cannot talk about relaxation time because the cell is never at rest, we believe that the measured shape recovery time arises from the coupling of the cell intrinsic deformability and the hydrodynamic stress. Depending on the flow conditions, the cell mechanics becomes dominant and drives the shape recovery process, allowing the measurement of recovery times of the same order of magnitude than relaxation times previously published. Finally, we demonstrated that the measurement of the shape recovery time can be used to distinguish Plasmodium falciparum (causing malaria) infected RBCs from healthy RBCs.

Localized Axolemma Deformations Suggest Mechanoporation as Axonal Injury Trigger

Traumatic brain injuries are a leading cause of morbidity and mortality worldwide. With almost 50% of traumatic brain injuries being related to axonal damage, understanding the nature of cellular level impairment is crucial. Experimental observations have so far led to the formulation of conflicting theories regarding the cellular primary injury mechanism. Disruption of the axolemma, or alternatively cytoskeletal damage has been suggested mainly as injury trigger. However, mechanoporation thresholds of generic membranes seem not to overlap with the axonal injury deformation range and microtubules appear too stiff and too weakly connected to undergo mechanical breaking. Here, we aim to shed a light on the mechanism of primary axonal injury, bridging finite element and molecular dynamics simulations. Despite the necessary level of approximation, our models can accurately describe the mechanical behavior of the unmyelinated axon and its membrane. More importantly, they give access to quantities that would be inaccessible with an experimental approach. We show that in a typical injury scenario, the axonal cortex sustains deformations large enough to entail pore formation in the adjoining lipid bilayer. The observed axonal deformation of 10–12% agree well with the thresholds proposed in the literature for axonal injury and, above all, allow us to provide quantitative evidences that do not exclude pore formation in the membrane as a result of trauma. Our findings bring to an increased knowledge of axonal injury mechanism that will have positive implications for the prevention and treatment of brain injuries.

Active probing of the mechanical properties of biological and synthetic vesicles

BACKGROUND

The interest in mechanics of synthetic and biological vesicles has been continuously growing during the last decades. Liposomes serve as model systems for investigating fundamental membrane processes and properties. More recently, extracellular vesicles (EVs) have been investigated mechanically as well. EVs are widely studied in fundamental and applied sciences, but their material properties remained elusive until recently. Elucidating the mechanical properties of vesicles is essential to unveil the mechanisms behind a variety of biological processes, e.g. budding, vesiculation and cellular uptake mechanisms.

SCOPE OF REVIEW

The importance of mechanobiology for studies of vesicles and membranes is discussed, as well as the different available techniques to probe their mechanical properties. In particular, the mechanics of vesicles and membranes as obtained by nanoindentation, micropipette aspiration, optical tweezers, electrodeformation and electroporation experiments is addressed.

MAJOR CONCLUSIONS

EVs and liposomes possess an astonishing rich, diverse behavior. To better understand their properties, and for optimization of their applications in nanotechnology, an improved understanding of their mechanical properties is needed. Depending on the size of the vesicles and the specific scientific question, different techniques can be chosen for their mechanical characterization.

GENERAL SIGNIFICANCE

Understanding the mechanical properties of vesicles is necessary to gain deeper insight in the fundamental biological mechanisms involved in vesicle generation and cellular uptake. This furthermore facilitates technological applications such as using vesicles as targeted drug delivery vehicles. Liposome studies provide insight into fundamental membrane processes and properties, whereas the role and functioning of EVs in biology and medicine are increasingly elucidated.

Three-Dimensional Shapes and Cell Deformability of Rat Red Blood Cells during and after Asphyxial Cardiac Arrest

Changes in microcirculation are believed to perform an important role after cardiac arrest. In particular, rheological changes in red blood cells (RBCs) have been observed during and after ischemic-reperfusion injury. Employing three-dimensional laser interferometric microscopy, we investigated three-dimensional shapes and deformability of RBCs during and after asphyxial cardiac arrest in rats at the individual cell level. Rat cardiac arrest was induced by asphyxia. Five rats were maintained for 7 min of no-flow time, and then, cardiopulmonary resuscitation (CPR) was started. Blood samples were obtained before cardiac arrest, during CPR, and 60 min after return of spontaneous circulation (ROSC). Quantitative phase imaging (QPI) techniques based on laser interferometry were used to measure the three-dimensional refractive index (RI) tomograms of the RBC, from which structural and biochemical properties were retrieved. Dynamic membrane fluctuations in the cell membrane were also quantitatively and sensitively measured in order to investigate cell deformability. Mean corpuscular hemoglobin, mean cell volume, mean corpuscular hemoglobin concentration, and red blood cell distribution width remained unchanged during CPR and after ROSC compared with those before cardiac arrest. QPI results revealed that RBC membrane fluctuations, sphericity, and surface area did not change significantly during CPR or after ROSC compared with initial values. In conclusion, no three-dimensional shapes and cell deformability changes in RBCs were detected.

Quantitative analysis of three-dimensional morphology and membrane dynamics of red blood cells during temperature elevation

The optimal functionality of red blood cells is closely associated with the surrounding environment. This study was undertaken to analyze the changes in membrane profile, mean corpuscular hemoglobin (MCH), and cell membrane fluctuations (CMF) of healthy red blood cells (RBC) at varying temperatures. The temperature was elevated from 17 °C to 41 °C within a duration of less than one hour, and the holograms were recorded by an off-axis configuration. After hologram reconstruction, we extracted single RBCs and evaluated their morphologically related features (projected surface area and sphericity coefficient), MCH, and CMF. We observed that elevating the temperature results in changes in the three-dimensional (3D) profile. Since CMF amplitude is highly correlated to the bending curvature of RBC membrane, temperature-induced shape changes can alter CMF’s map and amplitude; mainly larger fluctuations appear on dimple area at a higher temperature. Regardless of the shape changes, no alterations in MCH were seen with temperature variation.

Self-Assembly and Biogenesis of the Cellular Membrane are Dictated by Membrane Stretch and Composition

The cell plasma membrane is a highly dynamic organelle governing a wide range of cellular activities including ion transport, secretion, cell division, growth, and development. The fundamental process involved in the addition of new membranes to pre-existing plasma membranes, however, is unclear. Here, we report, using biophysical, morphological, biochemical, and molecular dynamic simulations, the selective incorporation of proteins and lipids from the cytosol into the cell plasma membrane dictated by membrane stretch and composition. Stretching of the cell membrane as a consequence of volume increase following incubation in a hypotonic solution and results in the incorporation of cytosolic proteins and lipids into the existing plasma membrane. Molecular dynamic simulations further confirm that increased membrane stretch results in the rapid insertion of lipids into the existing plasma membrane. Similarly, depletion of cholesterol from the cell plasma membrane selectively alters the incorporation of lipids into the membrane.

Red blood cells as an efficient in vitro model for evaluating the efficacy of metallic nanoparticles

Blood and the linings of blood vessels may be regarded as a fifth tissue type. The human body contains 5 × 10⁹ red blood cells (RBCs) per ml, a total of 2.5 × 10¹³ cells in the 5 l of blood present in the body. With an average lifetime of 125 days, human RBCs are destroyed by leukocytes in the spleen and liver. Nowadays red blood cells are extensively used to study various metabolic functions. Nanoparticles (NP) are being widely accepted for drug delivery system. This review summarizes the red blood cells, NPs and their characteristics on the basis of the RBC components along with drug delivery systems through RBCs. Further, we also discussed that how erythrocytes can be used as an efficient in vitro model for evaluating the efficacy of various nanocomposite materials.

Mechanics and Dynamics of Bacterial Cell Lysis

Membrane lysis, or rupture, is a cell death pathway in bacteria frequently caused by cell wall-targeting antibiotics. Although previous studies have clarified the biochemical mechanisms of antibiotic action, a physical understanding of the processes leading to lysis remains lacking. Here, we analyze the dynamics of membrane bulging and lysis in Escherichia coli, in which the formation of an initial, partially subtended spherical bulge ("bulging") after cell wall digestion occurs on a characteristic timescale of 1 s and the growth of the bulge ("swelling") occurs on a slower characteristic timescale of 100 s. We show that bulging can be energetically favorable due to the relaxation of the entropic and stretching energies of the inner membrane, cell wall, and outer membrane and that the experimentally observed timescales are consistent with model predictions. We then show that swelling is mediated by the enlargement of wall defects, after which cell lysis is consistent with both the inner and outer membranes exceeding characteristic estimates of the yield areal strains of biological membranes. These results contrast biological membrane physics and the physics of thin, rigid shells. They also have implications for cellular morphogenesis and antibiotic discovery across different species of bacteria.

Micro-Surface and -Interfacial Tensions Measured Using the Micropipette Technique: Applications in Ultrasound-Microbubbles, Oil-Recovery, Lung-Surfactants, Nanoprecipitation, and Microfluidics

This review presents a series of measurements of the surface and interfacial tensions we have been able to make using the micropipette technique. These include: equilibrium tensions at the air-water surface and oil-water interface, as well as equilibrium and dynamic adsorption of water-soluble surfactants and water-insoluble and lipids. At its essence, the micropipette technique is one of capillary-action, glass-wetting, and applied pressure. A micropipette, as a parallel or tapered shaft, is mounted horizontally in a microchamber and viewed in an inverted microscope. When filled with air or oil, and inserted into an aqueous-filled chamber, the position of the surface or interface meniscus is controlled by applied micropipette pressure. The position and hence radius of curvature of the meniscus can be moved in a controlled fashion from dimensions associated with the capillary tip (~5–10 μm), to back down the micropipette that can taper out to 450 μm. All measurements are therefore actually made at the microscale. Following the Young–Laplace equation and geometry of the capillary, the surface or interfacial tension value is simply obtained from the radius of the meniscus in the tapered pipette and the applied pressure to keep it there. Motivated by Franklin’s early experiments that demonstrated molecularity and monolayer formation, we also give a brief potted-historical perspective that includes fundamental surfactancy driven by margarine, the first use of a micropipette to circuitously measure bilayer membrane tensions and free energies of formation, and its basis for revolutionising the study and applications of membrane ion-channels in Droplet Interface Bilayers. Finally, we give five examples of where our measurements have had an impact on applications in micro-surfaces and microfluidics, including gas microbubbles for ultrasound contrast; interfacial tensions for micro-oil droplets in oil recovery; surface tensions and tensions-in-the surface for natural and synthetic lung surfactants; interfacial tension in nanoprecipitation; and micro-surface tensions in microfluidics.

Tissue cell differentiation and multicellular evolution via cytoskeletal stiffening in mechanically stressed microenvironments

Evolution of eukaryotes from simple cells to complex multicellular organisms remains a mystery. Our postulate is that cytoskeletal stiffening is a necessary condition for evolution of complex multicellular organisms from early simple eukaryotes. Recent findings show that embryonic stem cells are as soft as primitive eukaryotes-amoebae and that differentiated tissue cells can be two orders of magnitude stiffer than embryonic stem cells. Soft embryonic stem cells become stiff as they differentiate into tissue cells of the complex multicellular organisms to match their microenvironment stiffness. We perhaps see in differentiation of embryonic stem cells (derived from inner cell mass cells) the echo of those early evolutionary events. Early soft unicellular organisms might have evolved to stiffen their cytoskeleton to protect their structural integrity from external mechanical stresses while being able to maintain form, to change shape, and to move.

Effect of spectrin network elasticity on the shapes of erythrocyte doublets

Red blood cell (RBC) aggregates play an important role in determining blood rheology. RBCs in plasma or polymer solution interact attractively to form various shapes of RBC doublets, where the attractive interactions can be varied by changing the solution conditions. A systematic numerical study on RBC doublet formation is performed, which takes into account the shear elasticity of the RBC membrane due to the spectrin cytoskeleton, in addition to the membrane bending rigidity. RBC membranes are modeled by two-dimensional triangular networks of linked vertices, which represent three-dimensional cell shapes. The phase space of RBC doublet shapes in a wide range of adhesion strengths, reduced volumes, and shear elasticities is obtained. The shear elasticity of the RBC membrane changes the doublet phases significantly. Experimental images of RBC doublets in different solutions show similar configurations. Furthermore, we show that rouleau formation is affected by the doublet structure.

In pursuit of the mechanics that shape cell surfaces

Robust and responsive, the surface of a cell is as important as its interior when it comes to mechanically regulating form and function. New techniques are shedding light on this role, and a common language to describe its properties is now needed.

Temperature dependency of whole blood viscosity and red cell properties in desert ungulates: Studies on scimitar-horned oryx and dromedary camel

Background

The dromedary camel and the oryx antelope are exposed to excessive heat and solar radiation in their desert habitat. Desertification of areas with by now little rainfall may occur eventually. Well-adapted large animal species show us what is needed to survive in scorching regions.

Methods

Four scimitar-horned oryx antelopes (Oryx dammah), 10 camels (Camelus dromedarius), nine South African Merino sheep, and 17 Nguni cows were tested for RBC aggregation, RBC elongation, and plasma viscosity. The temperature dependency of blood viscosity was tested in 10 camels and compared to human reference values.

Results

Unlike sheep, Nguni cow, and dromedary camel, oryx RBCs aggregate in native plasma (M0:5.2 (3.3/6.7); M1:18.1 (16.7/27.9); Myrenne MA1). Elongation indices of oryx RBCs were intermediate to low (EImax: 22.6 (19.2/25.3); SS1/2 3.67 (2.52/4.95); Rheodyn SSD). Camel RBCs did not display the typical SS/EI curve by rotational ektacytometry. In-vitro blood viscosity (Physica MCR302) was lower in camels than in human blood at equal hematocrit. A decrease of temperature had only little effect on camel blood. At 10 s−1, blood viscosity in camel increased from 2.18mPa*s (2.01/2.37) at 42◦C to 4.39mPa*s (4.22/4.51) at 12◦C. In human blood, viscosity ranged from 8.21mPa*s (6.95/8.25) at 37◦C to 15.52mPa*s (14.25/16.03) at 12◦C. At 1000 s−1, blood viscosity in camel ranged from 2.00mPa*s (1.95/2.04) at 42◦C to 3.98mPa*s (3.88/4.08) at 12◦C. In human blood, viscosity ranged from 5.35mPa*s (4.96/5.87) at 37◦C to 11.24mPa*s (10.06/11.17) at 12◦C.

Conclusions

Desert ungulates may need RBC membranes, which are fortified to withstand changes in osmolality during dehydration-rehydration cycles. This reduces RBC deformability. Dromedary camel blood does not undergo stark changes in viscosity with changes in temperature. Therefore, blood fluidity could be rather maintained during the day and night cycle. This should reduce the need of the vascularity to rhythmically adapt to changing shear forces when camels experience heterothermy.

Cross-sectional distributions of normal and abnormal red blood cells in capillary tubes determined by a new technique

BACKGROUND

In the microcirculation, red blood cells (RBCs) were observed to be confined to an axial stream surrounded by a marginal RBC depleted layer. This axial accumulation of RBCs is considered to arise from the RBC deformability.

OBJECTIVE

To quantitatively evaluate the effect of RBC deformability on their axial accumulation at a flow condition comparable to that in arterioles by developing a new observation system for accurate measurements of radial RBC positions in the cross section of capillary tubes.

METHODS

The cross-sectional distributions of normal and hardened RBCs as well as softened RBCs suspended in capillary tube flows were measured with high spatial resolution. A new observation system was developed in which enface views of the cross-section of the tube were obtained at small distances upstream of the outlet at various longitudinal positions in the tube.

RESULTS

The radial positions of individual RBCs were detected within 1 μm accuracy. It was found that normal and softened RBCs rapidly migrated away from the wall towards the tube axis, whereas glutaraldehyde-hardened RBCs were dispersed widely over the tube cross-section, depending on the concentration of glutaraldehyde solution.

CONCLUSIONS

The newly devised observation system revealed quantitatively the essential role of RBC deformability in their axial accumulation.

Sonoporation-induced cell membrane permeabilization and cytoskeleton disassembly at varied acoustic and microbubble-cell parameters

Sonoporation mediated by microbubbles has being extensively studied as a promising technique to facilitate gene/drug delivery to cells. Previous studies mainly explored the membrane-level responses to sonoporation. To provide in-depth understanding on this process, various sonoporation-induced cellular responses (e.g., membrane permeabilization and cytoskeleton disassembly) generated at different impact parameters (e.g., acoustic driving pressure and microbubble-cell distances) were systemically investigated in the present work. HeLa cells, whose α-tubulin cytoskeleton was labeled by incorporation of a green fluorescence protein (GFP)-α-tubulin fusion protein, were exposed to a single ultrasound pulse (1 MHz, 20 cycles) in the presence of microbubbles. Intracellular transport via sonoporation was assessed in real time using propidium iodide and the disassembly of α-tubulin cytoskeleton was observed by fluorescence microscope. Meanwhile, the dynamics of an interacting bubble-cell pair was theoretically simulated by boundary element method. Both the experimental observations and numerical simulations showed that, by increasing the acoustic pressure or reducing the bubble-cell distance, intensified deformation could be induced in the cellular membrane, which could result in enhanced intracellular delivery and cytoskeleton disassembly. The current results suggest that more tailored therapeutic strategies could be designed for ultrasound gene/drug delivery by adopting optimal bubble-cell distances and/or better controlling incident acoustic energy.