Recombinant antibodies: a new reagent for biological agent detection

Phage display technology for fabricating a recombinant monoclonal ScFv antibody against tetanus toxin

Tetanus is a specific infectious disease, often associated with lower immunization in developing countries and catastrophic events (such as earthquakes). Millions of people, especially children, die every year from tetanus disease. Therefore, it is necessary to devise a rapid and sensitive detection method for tetanus toxin to ensure an early diagnosis and clinical treatment of tetanus. The current study looks at developing a novel, high specific, low-cost, and sensitive ScFv antibody. It is capable of tetanus detection immunoassays in clinical diagnosis, suspicious foods, and water monitoring. For this regard, a high-quality phage display antibody library (8.7 × 107 PFU/ml) was constructed. Tetanus-specific antibodies with high affinity retrieved from libraries. After phage rescue and four rounds of biopanning, clone screening was performed by phage ELISA. Recombinant antibodies expressed from the AC8 clone showed the highest affinity for tetanus. SDS-PAGE and western blotting confirmed the presence of a high-quality, pure ScFv band at 32 kDa. ELISA was used to determine the affinity value, estimated to be around 10-8 M. The results suggest that the proposed detection method by ScFv antibodies is an alternative diagnostic tool enabling rapid and specific detection of the tetanus toxin.

Biomedical Applications of Microfluidic Devices: A Review

Both passive and active microfluidic chips are used in many biomedical and chemical applications to support fluid mixing, particle manipulations, and signal detection. Passive microfluidic devices are geometry-dependent, and their uses are rather limited. Active microfluidic devices include sensors or detectors that transduce chemical, biological, and physical changes into electrical or optical signals. Also, they are transduction devices that detect biological and chemical changes in biomedical applications, and they are highly versatile microfluidic tools for disease diagnosis and organ modeling. This review provides a comprehensive overview of the significant advances that have been made in the development of microfluidics devices. We will discuss the function of microfluidic devices as micromixers or as sorters of cells and substances (e.g., microfiltration, flow or displacement, and trapping). Microfluidic devices are fabricated using a range of techniques, including molding, etching, three-dimensional printing, and nanofabrication. Their broad utility lies in the detection of diagnostic biomarkers and organ-on-chip approaches that permit disease modeling in cancer, as well as uses in neurological, cardiovascular, hepatic, and pulmonary diseases. Biosensor applications allow for point-of-care testing, using assays based on enzymes, nanozymes, antibodies, or nucleic acids (DNA or RNA). An anticipated development in the field includes the optimization of techniques for the fabrication of microfluidic devices using biocompatible materials. These developments will increase biomedical versatility, reduce diagnostic costs, and accelerate diagnosis time of microfluidics technology.

Rapid, Sensitive, and Selective Quantification of Bacillus cereus Spores Using xMAP Technology

Bacillus cereus is a spore-forming ubiquitous bacterium notable as a food poisoning agent. Detection of B. cereus spores using selective media is laborious and non-specific. Herein, the quantitative detection of B. cereus spores was investigated with commercial antibodies and published aptamer sequences. Several detection reagents were screened for affinity to Bacillus collagen-like protein A (BclA), an abundant exosporium glycoprotein. Sensitivity and selectivity toward B. cereus spores were tested using immunoassays and multi-analyte profiling (xMAP). A recombinant antibody developed in llama against BclA protein showed B. cereus spore selectivity and sensitivity between 10² and 10⁵ spores/mL using xMAP. DNA aptamer sequences demonstrated sensitivity from 10³ to 10⁷ spores/mL and no cross-reaction to B. megaterium and B. subtilis. Selectivity for B. cereus spores was also demonstrated in a mixture of several diverse microorganisms and within a food sample with no compromise of sensitivity. As proof of concept for multiplexed measurement of human pathogens, B. cereus and three other microorganisms, E. coli, P. aeruginosa, and S. cerevisiae, were simultaneously detected using xMAP. These data support the development of a rapid, sensitive, and selective system for quantitation of B. cereus spores and multiplexed monitoring of human pathogens in complex matrices.

New insights for integration of nano particle with microfluidic systems for sensor applications

A biosensor is a compact device, which utilizes biological derived recognition component, immobilized on a transducer to analyze an analyte. Nanoparticles with their unique chemical and physical properties are versatile in their applications to develop as sensors. Different nanoparticles play different roles in the sensing systems like metal and metal oxide nanoparticles. The application of Gold, Silver and Copper nanoparticles will be discussed in brief. The nanoparticles typically function as substrates for immobilization of biomolecules, as catalytic agent, electron transfer agent between electrode surface and the biomolecules, and as reactants. Microfluidic deals with manipulating very small volumes of fluids (micro and nanoliters). This miniaturized platform enhances control of flow conditions and mixing rate of fluids. The microfluidics improves the sensitivity of the analysis, and reduces the volumes of sample and reagent in the analysis. The review specifically aims at representing microfluidics-based sensors and nanoparticle based sensors. This review will also focus on probable merger of these two fields to take advantage of both the fields and this will help in pushing the boundaries of these fields further more.

Moderate stability of a scissor double fluorescent triple helix molecular switch for the ultrasensitive biosensing of crop transgene

Schematic of the ultrasensitive biosensing of special genes. (I: traditional molecular beacon detection method; II: scissor DFTHMS; III: three cases of BHQ-1-TFO).

Strategies for capturing Bacillus thuringiensis spores on surfaces of (001) GaAs-based biosensors

Bacillus thuringiensis (Bt) is used as a bioinsecticide since it effectively kills insect larvae. Bt is also genetically similar to Bacillus cereus (Bc), a well recognized foodborne human pathogen; they are both members of the Bacillus cereus group (BC group). Although approved Bt bioinsecticide products have been confirmed to be non-pathogenic to humans, close monitoring of Bt during dissemination is important for cost considerations and to limit impact on biodiversity towards nontarget organisms. As such, developing rapid, sensitive, and specific tools for quantitative detection of Bt spores during and following spray operations is highly desirable. The goals of this study were to investigate commercially available detection reagents for sensitivity and selectivity in detecting Bt spores, and then functionalize a surface of (001) GaAs used in photonic biosensing. To achieve these goals, we (1) screened commercial antibodies for their capacity to bind recombinant proteins from Bt spores, (2) screened antibodies and aptamers for their sensitivity and selectivity against Bt spores, and (3) tested the efficiency of selected antibodies and aptamers in capturing Bt spores on the surface of functionalized GaAs biochips. Seven genes encoding Bt spore proteins were cloned and expressed in Escherichia coli. The binding of each purified spore antigen was tested by commercially available polyclonal and monoclonal antibodies claimed to exclusively target spores. Of the seven targets, Bacillus collagen-like protein A, was the most abundant protein on Bt spores and demonstrated the strongest binding affinity to all test antibodies. The commercial antibodies (Abs) were also tested for specificity to BC Group versus non-BC Group spores. Three of six commercial antibodies showed selectivity to Bt spores, with recombinant Abs providing the most robust lower range of detection (10² to 6 × 10³ spores/mL). The sensitivity and selectivity of three published DNA aptamer sequences demonstrated a wide range of detection sensitivity for Bt spores. Two of the three test aptamers also showed reasonable selectivity towards Bt spores while the third demonstrated reactivity to non-BC Group B. megaterium and B. subtilis. Of the reagents tested, a thiolated aptamer and llama recombinant Ab showed highest Bt spore capture efficiency as measured by spore coverage of the GaAs surface. These results confirm that the selected aptamer and llama rAb can be considered strong candidates for the development of GaAs-based biosensing devices.

A new single-chain variable fragment (scFv) antibody provides sensitive and specific detection of citrus tristeza virus

Citrus tristeza virus (CTV) is the most economically important virus disease of citrus worldwide. To develop a specific serological assay for CTV, a Tomlinson phage display antibody library of single chain variable fragments (scFv) was screened with a recombinant CTV coat protein (CTV-CP) heterologously expressed in Escherichia coli. The phage clones were checked by ELISA to identify clones with high specificity for CTV-CP. Eight clones were strongly reactive with CTV-CP. Nucleotide sequencing of these clones revealed that all of them contained the same sequence. Thus, the phage-displayed scFv antibody was termed scFvF10. Evaluation of scFvF10 binding to CTV-CP by plate-trapped antigen ELISA (PTA-ELISA) and immunoblotting, showed that it was specific and allowed sensitive detection of CTV-CP. Homology-based molecular modeling and docking analysis confirmed that the interaction between CTV-CP and scFvF10, with a binding energy of -738 kj mol-1, occurred mainly by 12 intermolecular hydrogen bonds. Moreover, triple-antibody sandwich (TAS)-ELISA using scFvF10 as second antibody showed high sensitivity in the detection of CTV infected samples. The CTV detection limit of scFvF10 by PTA-ELISA and TAS-ELISA were 0.05 and 0.01 μg CP/mL, respectively. Our results with different diagnostic assays demonstrated that scFvF10 has the potential to be used as an efficient tool for CTV-infected plant diagnosis.

Isolation of single-chain variable fragment (scFv) antibodies for detection of Chickpea chlorotic dwarf virus (CpCDV) by phage display

Chickpea chlorotic dwarf virus (CpCDV, genus Mastrevirus), has a wide host range and geographic distribution in many parts of the world, and it is one of the most important legume-infecting viruses. Detection of CpCDV-infected plants in the field and evaluation of viral resistance of plant cultivars are possible by conducting serological assays. Here, development and characterization of a specific recombinant monoclonal antibody for CpCDV as a diagnostic tool are described. For this purpose, the coat protein of CpCDV was expressed in Escherichia coli strain Rosetta (DE3) and used to screen a Tomlinson phage display antibody library to select a specific single-chain variable fragment (scFv). In each round of biopanning, the affinity of the phage for CpCDV-CP was tested by enzyme-linked immunosorbent assay (ELISA). The results showed that the specificity of the eluted phages increased after each round of panning. Testing of individual clones by ELISA showed that five clones of the monoclonal phage were more strongly reactive against CpCDV than the other clones. All selected positive clones contained the same sequence. The phage-displayed scFv antibody, which was named CpCDV-scFvB9, did not bind to other tested plant pathogens and showed high sensitivity in the detection of CpCDV. A Western blot assay demonstrated that CpCDV-scFvB9 reacted with the recombinant coat protein of CpCDV. Finally, the interaction CpCDV-scFvB9 and CpCDV-CP was analyzed in a molecular docking experiment. This is the first report on production of an scFv antibody against CpCDV, which could be useful for immunological detection of the virus.

Application of nanotechnology in biosensors for enhancing pathogen detection

Rapid detection and identification of pathogenic microorganisms is fundamental to minimizing the spread of infectious disease, and informing clinicians on patient treatment strategies. This need has led to the development of enhanced biosensors that utilize state of the art nanomaterials and nanotechnology, and represent the next generation of diagnostics. A primer on nanoscale biorecognition elements such as, nucleic acids, antibodies, and their synthetic analogs (molecular imprinted polymers), will be presented first. Next the application of various nanotechnologies for biosensor transduction will be discussed, along with the inherent nanoscale phenomenon that leads to their improved performance and capabilities in biosensor systems. A future outlook on characterization and quality assurance, nanotoxicity, and nanomaterial integration into lab-on-a-chip systems will provide the closing thoughts. This article is categorized under: Diagnostic Tools > Diagnostic Nanodevices Diagnostic Tools > Biosensing.

Sensitive colorimetric assay using insulin G-quadruplex aptamer arrays on DNA nanotubes coupled with magnetic nanoparticles

Described here is a methodology for fabrication of a sensitive colorimetric nanoassay for measurement of insulin using G-quadruplex aptamer arrays on DNA nanotubes (DNTs) coupled with magnetic nanoparticles. The spectroscopic findings (e.g. visible spectra, velocity assay and limit of detection determination) indicated a highly sensitive performance of this new nanoassay in comparison to those results obtained from the insulin assay with non-arrayed aptamers. The clinical performance statistics (i.e. paired sample t-test, Bland-Altman plot and scatter diagram) from the newly developed assay and the enzyme-linked immunosorbent assay suggested its reliable precision and its acceptable repeatability for measurement of insulin in human sera. This is, to our knowledge, the first study for the application of magnetic nanoparticle-coupled DNTs for carrying G-quadruplex aptamers for detection of biomolecules (such as insulin) in human serum.

Multifunctional Nanotechnology-Enabled Sensors for Rapid Capture and Detection of Pathogens

Nanomaterial-based sensing approaches that incorporate different types of nanoparticles (NPs) and nanostructures in conjunction with natural or synthetic receptors as molecular recognition elements provide opportunities for the design of sensitive and selective assays for rapid detection of contaminants. This review summarizes recent advancements over the past ten years in the development of nanotechnology-enabled sensors and systems for capture and detection of pathogens. The most common types of nanostructures and NPs, their modification with receptor molecules and integration to produce viable sensing systems with biorecognition, amplification and signal readout are discussed. Examples of all-in-one systems that combine multifunctional properties for capture, separation, inactivation and detection are also provided. Current trends in the development of low-cost instrumentation for rapid assessment of food contamination are discussed as well as challenges for practical implementation and directions for future research.

Surface plasmon resonance based biosensor: A new platform for rapid diagnosis of livestock diseases

Surface plasmon resonance (SPR) based biosensors are the most advanced and developed optical label-free biosensor technique used for powerful detection with vast applications in environmental protection, biotechnology, medical diagnostics, drug screening, food safety, and security as well in livestock sector. The livestock sector which contributes the largest economy of India, harbors many bacterial, viral, and fungal diseases impacting a great loss to the production and productive potential which is a major concern in both small and large ruminants. Hence, an accurate, sensitive, and rapid diagnosis is required for prevention of these above-mentioned diseases. SPR based biosensor assay may fulfill the above characteristics which lead to a greater platform for rapid diagnosis of different livestock diseases. Hence, this review may give a detail idea about the principle, recent development of SPR based biosensor techniques and its application in livestock sector.

Expression and Functional Properties of an Anti-Triazophos High-Affinity Single-Chain Variable Fragment Antibody with Specific Lambda Light Chain

Triazophos is a widely used organophosphorous insecticide that has potentially adverse effects to organisms. In the present study, a high-affinity single-chain variable fragment (scFv) antibody with specific lambda light chain was developed for residue monitoring. First, the specific variable regions were correctly amplified from a hybridoma cell line 8C10 that secreted monoclonal antibody (mAb) against triazophos. The regions were then assembled as scFv via splicing by overlap extension polymerase chain reaction. Subsequently, the recombinant anti-triazophos scFv-8C10 was successfully expressed in Escherichia coli strain HB2151 in soluble form, purified through immobilized metal ion affinity chromatography, and verified via Western blot and peptide mass fingerprinting analyses. Afterward, an indirect competitive enzyme-linked immunosorbent assay was established based on the purified anti-triazophos scFv-8C10 antibody. The assay exhibited properties similar to those based on the parent mAb, with a high sensitivity (IC50 of 1.73 ng/mL) to triazophos and no cross reaction for other organophosphorus pesticides; it was reliable in detecting triazophos residues in spiked water samples. Moreover, kinetic measurement using a surface plasmon resonance biosensor indicated that the purified scFv-8C10 antibody had a high affinity of 1.8 × 10(-10) M and exhibited good binding stability. Results indicated that the recombinant high-affinity scFv-8C10 antibody was an effective detection material that would be promising for monitoring triazophos residues in environment samples.

Microfluidics Integrated Biosensors: A Leading Technology towards Lab-on-a-Chip and Sensing Applications

A biosensor can be defined as a compact analytical device or unit incorporating a biological or biologically derived sensitive recognition element immobilized on a physicochemical transducer to measure one or more analytes. Microfluidic systems, on the other hand, provide throughput processing, enhance transport for controlling the flow conditions, increase the mixing rate of different reagents, reduce sample and reagents volume (down to nanoliter), increase sensitivity of detection, and utilize the same platform for both sample preparation and detection. In view of these advantages, the integration of microfluidic and biosensor technologies provides the ability to merge chemical and biological components into a single platform and offers new opportunities for future biosensing applications including portability, disposability, real-time detection, unprecedented accuracies, and simultaneous analysis of different analytes in a single device. This review aims at representing advances and achievements in the field of microfluidic-based biosensing. The review also presents examples extracted from the literature to demonstrate the advantages of merging microfluidic and biosensing technologies and illustrate the versatility that such integration promises in the future biosensing for emerging areas of biological engineering, biomedical studies, point-of-care diagnostics, environmental monitoring, and precision agriculture.

Antiproliferative and apoptotic effects of a specific antiprostate stem cell single chain antibody on human prostate cancer cells

Prostate stem cell antigen (PSCA) is a highly glycosylated cell surface protein which is overexpressed in several malignancies including prostate, pancreas, and urinary bladder cancers. Tumor suppression has been reported by anti-PSCA antibody. Small and high affinity single chain antibodies (scFv) have been introduced as effective agents for cancer immunotargeting approaches. In the present study, we used a phage antibody display library of scFv and selected two antibodies against two immunodominant epitopes of PSCA by panning process. The reactivity of the scFvs for the corresponding epitopes was determined by phage ELISA. The binding specificity of antibodies to PSCA-expressing prostate cancer cell line, DU-145, was analyzed by flow cytometry. The antiproliferative and apoptotic induction effects were evaluated by MTT and Annexin-V assays, respectively. Results represented functional scFv C5-II which could bind specifically to DU-145 cells and significantly inhibited the proliferation of these cells (61%) with no effect on PSCA-negative cells. The antibody also induced apoptosis in the PSCA expressing cells. The percentage of the apoptotic cells after 24 hrs of exposure to 500 scFv/cell was 33.80%. These results demonstrate that the functional anti-PSCA scFv C5-II has the potential to be considered as a new agent for targeted therapy of prostate cancer.

Surface plasmon resonance based biosensor technique: a review

Optical Surface plasmon resonance (SPR) biosensors represent the most advanced and developed optical label-free biosensor technology. Optical SPR biosensors are a powerful detection and analysis tool that has vast applications in environmental protection, biotechnology, medical diagnostics, drug screening, food safety and security. This article reviews the recent development of SPR biosensor techniques, including bulk SPR and localized SPR (LSPR) biosensors, for detecting interactions between an analyte of interest in solution and a biomolecular recognition. The concepts of bulk and localized SPs and the working principles of both sensing techniques are introduced. Major sensing advances on biorecognition elements, measurement formats, and sensing platforms are presented. Finally, the discussions on both biosensor techniques as well as comparison of both SPR sensing techniques are made.

Bacteriophage based probes for pathogen detection

Rapid and specific detection of pathogenic bacteria is important for the proper treatment, containment and prevention of human, animal and plant diseases. Identifying unique biological probes to achieve a high degree of specificity and minimize false positives has therefore garnered much interest in recent years. Bacteriophages are obligate intracellular parasites that subvert bacterial cell resources for their own multiplication and production of disseminative new virions, which repeat the cycle by binding specifically to the host surface receptors and injecting genetic material into the bacterial cells. The precision of host recognition in phages is imparted by the receptor binding proteins (RBPs) that are often located in the tail-spike or tail fiber protein assemblies of the virions. Phage host recognition specificity has been traditionally exploited for bacterial typing using laborious and time consuming bacterial growth assays. At the same time this feature makes phage virions or RBPs an excellent choice for the development of probes capable of selectively capturing bacteria on solid surfaces with subsequent quick and automatic detection of the binding event. This review focuses on the description of pathogen detection approaches based on immobilized phage virions as well as pure recombinant RBPs. Specific advantages of RBP-based molecular probes are also discussed.

scFv antibody: principles and clinical application

To date, generation of single-chain fragment variable (scFv) has become an established technique used to produce a completely functional antigen-binding fragment in bacterial systems. The advances in antibody engineering have now facilitated a more efficient and generally applicable method to produce Fv fragments. Basically, scFv antibodies produced from phage display can be genetically fused to the marker proteins, such as fluorescent proteins or alkaline phosphatase. These bifunctional proteins having both antigen-binding capacity and marker activity can be obtained from transformed bacteria and used for one-step immunodetection of biological agents. Alternatively, antibody fragments could also be applied in the construction of immunotoxins, therapeutic gene delivery, and anticancer intrabodies for therapeutic purposes. This paper provides an overview of the current studies on the principle, generation, and application of scFv. The potential of scFv in breast cancer research is also discussed in this paper.

Recombinant antibodies and their use in biosensors

Inexpensive, noninvasive immunoassays can be used to quickly detect disease in humans. Immunoassay sensitivity and specificity are decidedly dependent upon high-affinity, antigen-specific antibodies. Antibodies are produced biologically. As such, antibody quality and suitability for use in immunoassays cannot be readily determined or controlled by human intervention. However, the process through which high-quality antibodies can be obtained has been shortened and streamlined by use of genetic engineering and recombinant antibody techniques. Antibodies that traditionally take several months or more to produce when animals are used can now be developed in a few weeks as recombinant antibodies produced in bacteria, yeast, or other cell types. Typically most immunoassays use two or more antibodies or antibody fragments to detect antigens that are indicators of disease. However, a label-free biosensor, for example, a quartz-crystal microbalance (QCM) needs one antibody only. As such, the cost and time needed to design and develop an immunoassay can be substantially reduced if recombinant antibodies and biosensors are used rather than traditional antibody and assay (e.g. enzyme-linked immunosorbant assay, ELISA) methods. Unlike traditional antibodies, recombinant antibodies can be genetically engineered to self-assemble on biosensor surfaces, at high density, and correctly oriented to enhance antigen-binding activity and to increase assay sensitivity, specificity, and stability. Additionally, biosensor surface chemistry and physical and electronic properties can be modified to further increase immunoassay performance above and beyond that obtained by use of traditional methods. This review describes some of the techniques investigators have used to develop highly specific and sensitive, recombinant antibody-based biosensors for detection of antigens in simple or complex biological samples.

Construction of a single-chain variable-fragment antibody against the superantigen Staphylococcal enterotoxin B

Staphylococcal food poisoning (SFP) is one of the most prevalent causes of food-borne illness throughout the world. SFP is caused by 21 different types of staphylococcal enterotoxins produced by Staphylococcus aureus. Among these, staphylococcal enterotoxin B (SEB) is the most potent toxin and is a listed biological warfare (BW) agent. Therefore, development of immunological reagents for detection of SEB is of the utmost importance. High-affinity and specific monoclonal antibodies are being used for detection of SEB, but hybridoma clones tend to lose their antibody-secreting ability over time. This problem can be overcome by the use of recombinant antibodies produced in a bacterial system. In the present investigation, genes from a hybridoma clone encoding monoclonal antibody against SEB were immortalized using antibody phage display technology. A murine phage display library containing single-chain variable-fragment (ScFv) antibody genes was constructed in a pCANTAB 5E phagemid vector. Phage particles displaying ScFv were rescued by reinfection of helper phage followed by four rounds of biopanning for selection of SEB binding ScFv antibody fragments by using phage enzyme-linked immunosorbent assay (ELISA). Soluble SEB-ScFv antibodies were characterized from one of the clones showing high affinity for SEB. The anti-SEB ScFv antibody was highly specific, and its affinity constant was 3.16 nM as determined by surface plasmon resonance (SPR). These results demonstrate that the recombinant antibody constructed by immortalizing the antibody genes from a hybridoma clone is useful for immunodetection of SEB.

Bioshock: Biotechnology and Bioterrorism

In the recent past, the threat of a global bioterrorist attack has increased dramatically. In addition to the already existing microorganisms and techniques, the recent explosion in biotechnology has considerably added to the arsenal of the bioterrorist. Molecular technologies are now available which can be used by committed bioterrorist groups to manipulate and modify microorganisms so as to make them increasingly infectious, virulent or treatment resistant for causing maximum casualties. Infectious diseases which are likely to be used as bioweapons are Anthrax, Botulism, Plague, Smallpox and Brucella. Molecular techniques like immunoassays and nucleic acid amplification are now available to detect bioattacks. This article discusses the threat of bioterrorism. It also evaluates the molecular diagnostic methods and the future of early containment of a bioterrorist attack using molecular techniques.

Flow Cytometry: A Multipurpose Technology for a Wide Spectrum of Global Biosecurity Applications

Flow cytometry, and its offspring-flow sorting, are extremely useful technologies for biosecurity and public health studies related to infectious disease. Applications range from environmental surveillance of pathogens to diagnosis and the development of vaccines and therapeutics for prevention and control of infectious diseases. Flow cytometers have been developed for laboratory analysis and field deployment. The current state of the art could enjoy more widespread use if instruments and data analysis were made simpler and had more automated functions, and if technology was modified to reduce biosafety concerns related to analysis and sorting of infectious organisms. The full spectrum of possible applications of flow cytometry technology to global biosecurity challenges has not yet been realized.

Development and implementation of a single-chain Fv antibody for specific detection of Bacillus anthracis spores

A single-chain Fv (scFv) antibody was developed and applied for efficient and specific detection of Bacillus anthracis spores. The antibody was isolated from a phage display library prepared from spleens of mice immunized with a water-soluble extract of the outer membrane of the B. anthracis spore (exosporium). The library (7 x 10(6) PFU) was biopanned against live, native B. anthracis ATCC delta14185 spores suspended in solution, resulting in the isolation of a unique soluble scFv antibody. The antibody was affinity purified and its affinity constant (3 x 10(8) +/- 1 x 10(8) M(-1)) determined via flow cytometry (FCM). Preliminary characterization of scFv specificity indicated that the scFv antibody does not cross-react with representatives of some phylogenetically related Bacillus spores. The potential use of scFv antibodies in detection platforms was demonstrated by the successful application of the soluble purified scFv antibody in enzyme-linked immunosorbent assays, immunofluorescence assays, and FCM.

Detection of sulfur mustard adducts in human callus by phage antibodies

As part of a research program to develop novel methods for diagnosis of sulfur mustard exposure in the human skin the suitability of phage display was explored. Phage display is a relative new method that enables researchers to quickly evaluate a huge range of potentially useful antibodies, thereby bypassing the more costly and time-consuming hybridoma technique. The Tomlinson I and J phage libraries were used to select phage antibodies exhibiting affinity for sulfur mustard adducts on keratins, isolated from human callus. Two kinds of phage antibodies were obtained: antibodies recognizing keratin and antibodies recognizing keratin which was exposed to sulfur mustard. These phage antibodies retained activity after repeated culturing and culturing in larger volumes. For the first time antibody phage display was successfully applied for immunodiagnostics of a chemical warfare agent.

Engineering Camel Single-Domain Antibodies and Immobilization Chemistry for Human Prostate-Specific Antigen Sensing

The specificity and affinity characteristics of antibodies make them excellent probes in biosensor applications. Unfortunately, their large size, unstable behavior, and random immobilization properties create numerous problems. The single-domain antigen-binding fragment derived from heavy-chain antibodies of camelids (termed VHH) offers special advantages in terms of size, stability, and ease of generating different antibody constructs. In this study, we show the potential of those VHHs in sensing human prostate-specific antigen (hPSA) by SPR technology. Different VHH constructs were immobilized onto commercial and custom-built sensor surfaces by metal chelation, biotin-streptavidin interaction, or covalent coupling. The detection of subnanogram per milliliter hPSA concentrations could be attained on a covalently coupled three-dimensional dextran surface. Moreover, the ratio of different hPSA isoform concentrations could be assessed via a sandwich assay and resulted in the detection of clinically significant antigen concentrations within 15 min. In addition, for the first time, the intrinsic protein stability is presented as an important probe design factor, since our results reveal that higher intrinsic stability offers higher resistance to harsh regeneration conditions. In conclusion, we present VHHs as a novel class of biosensor probes rivaling conventional antibodies and their derived antibody fragments.

An ELISA for detection of infectious bursal disease virus and differentiation of very virulent strains based on single chain recombinant chicken antibodies

Two chicken single-chain variable antibody fragments (scFv) designated scFv154 and scFv88, previously shown to react with either all or very virulent (vv) infectious bursal disease virus (IBDV) strains, respectively, were evaluated for use in an enzyme-linked immunosorbent assay (ELISA) for differentiation of vvIBDV. Specificity and sensitivity of the vvIBDV ELISA was assessed when scFv154 and scFv88 were expressed as soluble antibodies (sAb), phage antibodies (pAb) or hyper-phage antibodies (hpAb). The highest test sensitivity and specificity was obtained using hpAb154 to detect all IBDV and pAb88 to differentiate vvIBDV strains. Such an ELISA was eight to 16 times more sensitive for IBDV antigen detection than the mouse monoclonal antibody ELISA. Using field samples, the scFv ELISA was able to differentiate between flocks infected with vvIBDV and those infected with classical or variant IBDV. In one instance IBDV was detected in a flock found to be negative by the monoclonal antibody ELISA. The results showed that scFv can be utilized as highly specific and sensitive ELISA reagents for the detection and discrimination of avian pathogens.

Probability of real-time detection versus probability of infection for aerosolized biowarfare agents: a model study

Real-time biosensors are expected to provide significant help in emergency response management should a terrorist attack with the use of biowarfare, BW, agents occur. In spite of recent and spectacular progress in the field of biosensors, several core questions still remain unaddressed. For instance, how sensitive should be a sensor? To what levels of infection would the different sensitivity limits correspond? How the probabilities of identification correspond to the probabilities of infection by an agent? In this paper, an attempt was made to address these questions. A simple probability model was generated for the calculation of risks of infection of humans exposed to different doses of infectious agents and of the probability of their simultaneous real-time detection/identification by a model biosensor and its network. A model biosensor was defined as a single device that included an aerosol sampler and a device for identification by any known (or conceived) method. A network of biosensors was defined as a set of several single biosensors that operated in a similar way and dealt with the same amount of an agent. Neither the particular deployment of sensors within the network, nor the spacious and timely distribution of agent aerosols due to wind, ventilation, humidity, temperature, etc., was considered by the model. Three model biosensors based on PCR-, antibody/antigen-, and MS-technique were used for simulation. A wide range of their metric parameters encompassing those of commercially available and laboratory biosensors, and those of future, theoretically conceivable devices was used for several hundred simulations. Based on the analysis of the obtained results, it is concluded that small concentrations of aerosolized agents that are still able to provide significant risks of infection especially for highly infectious agents (e.g. for small pox those risk are 1, 8, and 37 infected out of 1000 exposed, depending on the viability of the virus preparation) will remain undetected by the present, most advanced, or even future, significantly refined real-time biosensors.

Current and developing technologies for monitoring agents of bioterrorism and biowarfare

Recent events have made public health officials acutely aware of the importance of rapidly and accurately detecting acts of bioterrorism. Because bioterrorism is difficult to predict or prevent, reliable platforms to rapidly detect and identify biothreat agents are important to minimize the spread of these agents and to protect the public health. These platforms must not only be sensitive and specific, but must also be able to accurately detect a variety of pathogens, including modified or previously uncharacterized agents, directly from complex sample matrices. Various commercial tests utilizing biochemical, immunological, nucleic acid, and bioluminescence procedures are currently available to identify biological threat agents. Newer tests have also been developed to identify such agents using aptamers, biochips, evanescent wave biosensors, cantilevers, living cells, and other innovative technologies. This review describes these current and developing technologies and considers challenges to rapid, accurate detection of biothreat agents. Although there is no ideal platform, many of these technologies have proved invaluable for the detection and identification of biothreat agents.

Detection of biological threats. A challenge for directed molecular evolution

The probe technique originated from early attempts of Anton van Leeuwenhoek to contrast microorganisms under the microscope using plant juices, successful staining of tubercle bacilli with synthetic dyes by Paul Ehrlich and discovery of a stain for differentiation of gram-positive and gram-negative bacteria by Hans Christian Gram. The technique relies on the principle that pathogens have unique structural features, which can be recognized by specifically labeled organic molecules. A hundred years of extensive screening efforts led to discovery of a limited assortment of organic probes that are used for identification and differentiation of bacteria. A new challenge--continuous monitoring of biological threats--requires long lasting molecular probes capable of tight specific binding of pathogens in unfavorable conditions. To respond to the challenge, probe technology is being revolutionized by utilizing methods of combinatorial chemistry, phage display and directed molecular evolution. This review describes how molecular evolution methods are applied for development of peptide, antibody and phage probes, and summarizes the author's own data on development of landscape phage probes against Salmonella typhimurium. The performance of the probes in detection of Salmonella is illustrated by a precipitation test, enzyme-linked immunosorbent assay (ELISA), fluorescence-activated cell sorting (FACS) and fluorescent, optical and electron microscopy.

Medical aspects of biologic toxins

Biologic toxins are molecules produced by living organisms that are poisonous to other species, such as humans. Some biologic toxins are so potent and relatively easy to produce that they have been classified as biothreat agents. These include the botulinum neurotoxins, ricin, staphylococcal enterotoxin B, and Clostridium perfringens epsilon toxin. This article focuses on these four biothreat toxins and their medical aspects. The majority of the article is spent on the botulinum neurotoxins, because these are the most poisonous substances known and are the only toxins classified as Category A threat agents-the highest level of threat agent. The remainder of the article is devoted to sections on the other three biothreat toxins: ricin, staphylococcal enterotoxin B, and C perfringens epsilon toxin.

Development of immunofiltration assay by light addressable potentiometric sensor with genetically biotinylated recombinant antibody for rapid identification of Venezuelan equine encephalitis virus

A genetically biotinylated single chain fragment variable antibody (scFv) against Venezuelan equine encephalitis virus (VEE) was applied in a system consisting of an immunofiltration enzyme assay (IFA) with a light addressable potentiometric sensor (LAPS) for the rapid identification of VEE. The IFA involved formation of an immunocomplex sandwich consisting of VEE, biotinylated antibody, fluoresceinated antibody and streptavidin, capture of the sandwich by filtration on biotinylated membrane, and labeling of the sandwich by anti-fluorescein urease conjugate. The concentration ratio of biotinylated to fluoresceinated antibodies was investigated and optimized. By the IFA/LAPS assay, the limit of detection (LOD) of VEE was approximately 30 ng/ml, similar to that achieved when chemically biotinylated monoclonal antibody (mAb) was applied. Total assay variance of the IFA/LAPS assay for both intra- and inter-assay precision was less than 20%. Assay accuracy was measured by comparing VEE concentrations estimated by IFA/LAPS standard curve to those obtained by conventional protein assay. VEE concentrations were found to differ by no more than 10%. The IFA/LAPS assay sensitivity was approximately equal to that of a conventional enzyme-linked immunosorbent assay (ELISA) utilizing polystyrene plates and a chromogenic substrate; however, less time and effort were required for performance of the IFA/LAPS assay. More importantly, use of genetically biotinylated scFv in the IFA/LAPS assay obviates the need for chemical biotinylation of antibody with resultant possible impairment of the antigen-binding site. Furthermore, the potential for batch-to-batch variability resulting from inequality in the number of biotin molecules labeled per antibody molecule is eliminated.

Generating recombinant anti-idiotypic antibodies for the detection of haptens in solution

A new method is described for generating recombinant human and chicken antibody fragments for accurate quantification of haptens in solution. The chemistry of labelling small molecules has always been a problem in the development of immunoassays. Here, we describe a specific panning procedure that enables the selection of recombinant anti-idiotypic phage antibodies that bind to hapten binding molecules (e.g., antibodies) in the absence of the hapten, but are displaced in a highly specific and concentration dependent manner, in the presence of the hapten. The major advantage of such a detection system is that there is no need to label the hapten or to covalently attach it to a solid phase. In this study we demonstrate, using cortisol and aldosterone as model haptens, that the recombinant antibody phage display technology offers great possibilities to generate recombinant anti-idiotypic antibodies. Furthermore, we show that such antibodies can be used successfully to design highly sensitive immunoassays for the quantification of small molecules.

Isolation and expression of recombinant antibody fragments to the biological warfare pathogen Brucella melitensis

Brucella melitensis is a highly infectious animal pathogen able to cause a recurring debilitating disease in humans and is therefore high on the list of biological warfare agents. Immunoglobulin genes from mice immunized with gamma-irradiated B. melitensis strain 16M were used to construct a library that was screened by phage display against similarly prepared bacteria. The selected phage particles afforded a strong enzyme-linked immunosorbent assay (ELISA) signal against gamma-irradiated B. melitensis cells. However, extensive efforts to express the respective single chain antibody variable region fragment (scFv) in soluble form failed due to: (i) poor solubility and (ii) in vivo degradation of the c-myc tag used for the detection of the recombinant antibodies. Both problems could be addressed by: (i) fusing a human kappa light chain constant domain (Ck) chain to the scFv to generate single chain antibody fragment (scAb) antibody fragments and (ii) by co-expression of the periplasmic chaperone Skp. While soluble, functional antibodies could be produced in this manner, phage-displaying scFvs or scAbs were still found to be superior ELISA reagents for immunoassays, due to the large signal amplification afforded by anti-phage antibodies. The isolated phage antibodies were shown to be highly specific to B. melitensis and did not recognize Yersinia pseudotuberculosis in contrast to the existing diagnostic monoclonal YST 9.2.1.

Phage display for detection of biological threat agents

The essential element of any immuno-based detector device is the probe that binds analyte and, as a part of the analytical platform, generates a measurable signal. The present review summarizes the state of the art in development of the probes for detection of the biological threat agents: toxins, bacteria, spores and viruses. Traditionally, the probes are antibodies, which are isolated from sera of immunized animals or culture media of hybridomas. However, the "natural" antibodies may have limited application in the new generation of real-time field detectors and monitoring systems, where stress-resistant and inexpensive long-livers are required. Phage display is a newcomer in the detection area, whose expertise is development of molecular probes for targeting of various biological structures. The probes can be selection from about billion clone libraries of recombinant phages expressing on their surface a vast variety of peptides and proteins, including antigen-binding fragments of antibodies. The selection procedure, like kind of affinity chromatography, allows separating of phage binders, which are propagated in Escherichia coli bacterial cells and purified using inexpensive technology. Although phage display traditionally is focused more on development of medical preparations and studying molecular recognition in biological systems, there are some examples of its successful use for detection, which are presented in the review. To be used as probes for detection, peptides and antibodies identified by phage display are usually chemically synthesized or produced in bacteria. Another interesting aspect is using of the selected phage itself as a probe in detector devices, like sort of substitute antibodies. This idea is illustrated in the review by "detection" of beta-galactosidase from E. coli with "landscape" phage displaying a dense array of peptide binders on the surface.

Detection of Staphylococcus aureus enterotoxin B at femtomolar levels with a miniature integrated two-channel surface plasmon resonance (SPR) sensor

Surface plasmon resonance (SPR) biosensors offer the capability for continuous real-time monitoring. The commercial instruments available have been large in size, expensive, and not amenable to field applications. We report here an SPR sensor system based on a prototype two-channel system similar to the single channel Spreeta devices. This system is an ideal candidate for field use. The two-channel design provides a reference channel to compensate for bulk refractive index (RI), non-specific binding and temperature variations. The SPR software includes a calibration function that normalizes the response from both channels, thus enabling accurate referencing. In addition, a temperature-controlled enclosure utilizing a thermo-electric module based on the Peltier effect provides the temperature stability necessary for accurate measurements of RI. The complete SPR sensor system can be powered by a 12V battery. Pre-functionalized, disposable, gold-coated thin glass slides provide easily renewable sensor elements for the system. Staphylococcus aureus enterotoxin B (SEB), a small protein toxin was directly detectable at sub-nanomolar levels and with amplification at femtomolar levels. A regeneration procedure for the sensor surface allowed for over 60 direct detection cycles in a 1-month period.

Purification of antibodies by affinity chromatography

This review focusses on affinity purification of immunoglobulins, a methodology which is a powerful tool to obtain pure and intact antibodies. Affinity techniques allow antibody purification both in a single step chromatographic procedure as well as in complex purification protocols depending on the intention to use the target antibody. The purification strategies for antibodies by interaction with affinity ligands such as antibodies and Fe receptors or low molecular weight compounds are described.