Organic Bioelectronic Devices for Metabolite Sensing

Iridium nanoparticles supported on polyaniline nanotubes for peroxidase mimicking towards total antioxidant capacity assay of fruits and vegetables

In this study, a straightforward approach is presented for the first time to anchor Ir nanoparticles on the surface of uniform polyaniline (PANi) nanotubes (NTs), which can be used as an efficient peroxidase (POD)-like catalyst. The morphology and chemical structure of the PANi-Ir nanocomposite are characterized by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffractometer (XRD), Raman and X-ray photoelectron spectroscopy (XPS) measurements. Owing to the strong interaction between Ir nanoparticles and PANi, a remarkable catalytic enhancement is achieved compared to the bare Ir black catalyst and individual PANi NTs, dominating withan electron transfer mechanism. Furthermore, an efficient colorimetric sensor for ascorbic acid (AA) is developed with a low detection limit of 1.0 μM (S/N = 3), and a total antioxidant capacity (TAC) sensing platform is also constructed for the rigorous detection and analysis of fruits and vegetables.

Engineering Proteins for PEDOT Dispersions: A New Horizon for Highly Mixed Ionic-Electronic Biocompatible Conducting Materials

Poly (3,4-ethylenedioxythiophene) (PEDOT) doped with polystyrene sulfonate (PSS) is the most used conducting polymer from energy to biomedical applications. Despite its exceptional properties, there is a need for developing new materials that can improve some of its inherent limitations, e.g., biocompatibility. In this context, doping PEDOT is propose with a robust recombinant protein with tunable properties, the consensus tetratricopeptide repeated protein (CTPR). The doping consists of an oxidative polymerization, where the PEDOT chains are stabilized by the negative charges of the CTPR protein. CTPR proteins are evaluated with three different lengths (3, 10, and 20 identical CTPR units) and optimized varied synthetic conditions. These findings revealed higher doping rate and oxidized state of the PEDOT chains when doped with the smallest scaffold (CTPR3). These PEDOT:CTPR hybrids possess ionic and electronic conductivity. Notably, PEDOT:CTPR3 displayed an electronic conductivity of 0.016 S cm-1, higher than any other reported protein-doped PEDOT. This result places PEDOT:CTPR3 at the level of PEDOT-biopolymer hybrids, and brings it closer in performance to PEDOT:PSS gold standard. Furthermore, PEDOT:CTPR3 dispersion is successfully optimized for inkjet printing, preserving its electroactivity properties after printing. This approach opens the door to the use of these novel hybrids for bioelectronics.

Enhancing the Thermoelectric Properties of Conjugated Polymers by Suppressing Dopant-Induced Disorder

Doping is a crucial strategy to enhance the performance of various organic electronic devices. However, in many cases, the random distribution of dopants in conjugated polymers leads to the disruption of the polymer microstructure, severely constraining the achievable performance of electronic devices. Here, it is shown that by ion-exchange doping polythiophene-based P[(3HT)1-x-stat-(T)x] (x = 0 (P1), 0.12 (P2), 0.24 (P3), and 0.36 (P4)), remarkably high electrical conductivity of >400 S cm-1 and power factor of >16 µW m-1 K-2 are achieved for the random copolymer P3, ranking it among highest ever reported for unaligned P3HT-based films, significantly higher than that of P1 (<40 S cm-1, <4 µW m-1 K-2). Although both polymers exhibit comparable field-effect transistor hole mobilities of ≈0.1 cm2 V-1 s-1 in the pristine state, after doping, Hall effect measurements indicate that P3 exhibits a large Hall mobility up to 1.2 cm2 V-1 s-1, significantly outperforming that of P1 (0.06 cm2 V-1 s-1). GIWAXS measurement determines that the in-plane π-π stacking distance of doped P3 is 3.44 Å, distinctly shorter than that of doped P1 (3.68 Å). These findings contribute to resolving the long-standing dopant-induced-disorder issues in P3HT and serve as an example for achieving fast charge transport in highly doped polymers for efficient electronics.

Stable n-Type Perylene Derivative Ladder Polymer with Antiambipolarity for Electrically Reconfigurable Organic Logic Gates

Organic electrochemical transistors (OECTs) are one of the promising building blocks to realize next-generation bioelectronics. To date, however, the performance and signal processing capabilities of these devices remain limited by their stability and speed. Herein, the authors demonstrate stable and fast n-type organic electrochemical transistors based on a side-chain-free ladder polymer, poly(benzimidazoanthradiisoquinolinedione). The device demonstrated fast normalized transient speed of 0.56 ± 0.17 ms um-2 and excellent long-term stability in aqueous electrolytes, with no significant drop in its doping current after 50 000 successive doping/dedoping cycles and 2-month storage at ambient conditions. These unique characteristics make this polymer especially suitable for bioelectronics, such as being used as a pull-down channel in a complementary inverter for long-term stable detection of electrophysiological signals. Moreover, the developed device shows a reversible anti-ambipolar behavior, enabling reconfigurable electronics to be realized using a single material. These results go beyond the conventional OECT and demonstrate the potential of OECTs to exhibit dynamically configurable functionalities for next-generation reconfigurable electronics.

Complementary integration of organic electrochemical transistors for front-end amplifier circuits of flexible neural implants

The ability to amplify, translate, and process small ionic potential fluctuations of neural processes directly at the recording site is essential to improve the performance of neural implants. Organic front-end analog electronics are ideal for this application, allowing for minimally invasive amplifiers owing to their tissue-like mechanical properties. Here, we demonstrate fully organic complementary circuits by pairing depletion- and enhancement-mode p- and n-type organic electrochemical transistors (OECTs). With precise geometry tuning and a vertical device architecture, we achieve overlapping output characteristics and integrate them into amplifiers with single neuronal dimensions (20 micrometers). Amplifiers with combined p- and n-OECTs result in voltage-to-voltage amplification with a gain of >30 decibels. We also leverage depletion and enhancement-mode p-OECTs with matching characteristics to demonstrate a differential recording capability with high common mode rejection rate (>60 decibels). Integrating OECT-based front-end amplifiers into a flexible shank form factor enables single-neuron recording in the mouse cortex with on-site filtering and amplification.

Enzymatic Galvanic Redox Potentiometry for In Vivo Biosensing

Redox potentiometry has emerged as a new platform for in vivo sensing, with improved neuronal compatibility and strong tolerance against sensitivity variation caused by protein fouling. Although enzymes show great possibilities in the fabrication of selective redox potentiometry, the fabrication of an enzyme electrode to output open-circuit voltage (EOC) with fast response remains challenging. Herein, we report a concept of novel enzymatic galvanic redox potentiometry (GRP) with improved time response coupling the merits of the high selectivity of enzyme electrodes with the excellent biocompatibility and reliability of GRP sensors. With a glucose biosensor as an illustration, we use flavin adenine dinucleotide-dependent glucose dehydrogenase as the recognition element and carbon black as the potential relay station to improve the response time. We find that the enzymatic GRP biosensor rapidly responds to glucose with a good linear relationship between EOC and the logarithm of glucose concentration within a range from 100 μM to 2.65 mM. The GRP biosensor shows high selectivity over O2 and coexisting neurochemicals, good reversibility, and sensitivity and can in vivo monitor glucose dynamics in rat brain. We believe that this study will pave a new platform for the in vivo potentiometric biosensing of chemical events with high reliability.

Highly Light-Harvesting MOF-on-MOF Heterostructure: Cascading Functionality to Flexible Photogating of Organic Photoelectrochemical Transistor and Bienzyme Cascade Detection

Recently, organic photoelectrochemical transistor (OPECT) bioanalysis has become a prominent technique for the high-performance detection of biomolecules. However, as a sensitive index of the OPECT, the dynamic regulation transconductance (gm) is still severely deficient. Herein, this work reports a new photosensitive metal-organic framework (MOF-on-MOF) heterostructure for the effective modulation of maximum gm and natural bienzyme interfacing toward choline detection. Specifically, the bidentate ligand MOF (b-MOF) was assembled onto the UiO-66 MOF (u-MOF) by a modular assembly method, which could facilitate the charge separation and generate enhanced photocurrents and offer a biophilic environment for the immobilization of choline oxidase (ChOx) and horseradish peroxidase (HRP) through hydrogen-bonded bridges. The transconductance of the OPECT could be flexibly altered by increased light intensity to maximal value at zero gate bias, and sensitive choline detection was achieved with a detection limit of 0.2 μM. This work reveals the potential of MOF-on-MOF heterostructures for futuristic optobioelectronics.

Healthcare Monitoring Sensors Based on Organic Transistors: Surface/Interface Strategy and Performance

Organic transistors possess inherent advantages such as flexibility, biocompatibility, customizable chemical structures, solution-processability, and amplifying capabilities, making them highly promising for portable healthcare sensor applications. Through convenient and diverse modifications at the material and device surfaces or interfaces, organic transistors allow for a wide range of sensor applications spanning from chemical and biological to physical sensing. In this comprehensive review, the surface and interface engineering aspect associated with four types of typical healthcare sensors is focused. The device operation principles and sensing mechanisms are systematically analyzed and highlighted, and particularly surface/interface functionalization strategies that contribute to the enhancement of sensing performance are focused. An outlook and perspective on the critical issues and challenges in the field of healthcare sensing using organic transistors are provided as well.

Organic Electrochemical Transistors for Biomarker Detections

The improvement of living standards and the advancement of medical technology have led to an increased focus on health among individuals. Detections of biomarkers are feasible approaches to obtaining information about health status, disease progression, and response to treatment of an individual. In recent years, organic electrochemical transistors (OECTs) have demonstrated high electrical performances and effectiveness in detecting various types of biomarkers. This review provides an overview of the working principles of OECTs and their performance in detecting multiple types of biomarkers, with a focus on the recent advances and representative applications of OECTs in wearable and implantable biomarker detections, and provides a perspective for the future development of OECT-based biomarker sensors.

Cleanroom-Free Direct Laser Micropatterning of Polymers for Organic Electrochemical Transistors in Logic Circuits and Glucose Biosensors

Organic electrochemical transistors (OECTs) are promising devices for bioelectronics, such as biosensors. However, current cleanroom-based microfabrication of OECTs hinders fast prototyping and widespread adoption of this technology for low-volume, low-cost applications. To address this limitation, a versatile and scalable approach for ultrafast laser microfabrication of OECTs is herein reported, where a femtosecond laser to pattern insulating polymers (such as parylene C or polyimide) is first used, exposing the underlying metal electrodes serving as transistor terminals (source, drain, or gate). After the first patterning step, conducting polymers, such as poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), or semiconducting polymers, are spin-coated on the device surface. Another femtosecond laser patterning step subsequently defines the active polymer area contributing to the OECT performance by disconnecting the channel and gate from the surrounding spin-coated film. The effective OECT width can be defined with high resolution (down to 2 µm) in less than a second of exposure. Micropatterning the OECT channel area significantly improved the transistor switching performance in the case of PEDOT:PSS-based transistors, speeding up the devices by two orders of magnitude. The utility of this OECT manufacturing approach is demonstrated by fabricating complementary logic (inverters) and glucose biosensors, thereby showing its potential to accelerate OECT research.

Exploring Electrochemistry: A Hydrogen Peroxide Sensor Based on a Screen-Printed Carbon Electrode Modified with Prussian Blue

There is an increasing need for fundamental electrochemistry concepts to be taught in the undergraduate curriculum, given the broad applicability of electrochemical technologies in addressing a wide range of global issues from critical energy shortages to real-time medical diagnostics. However, many electrochemical concepts are often taught in disparate laboratory experiments, spread out through the curriculum, which can be intimidating to students (and instructors). This experiment, which has been tested and optimized in the undergraduate classroom over multiple semesters, covers a wide range of electrochemistry topics in realizing the construction of a hydrogen peroxide (H2O2) sensor that is based on Prussian blue electrochemistry. The experiment introduces the fundamentals of cyclic voltammetry by prompting students to distinguish faradaic and capacitive components of voltammograms and to investigate their relationship with scan rate as per electrochemical theory. Students also evaluate electrocatalysis through electrodeposition of a thin film of Prussian blue on the sensor surface and the effects of this modification on electron transfer and sensor performance. Finally, students combine amperometric measurements with the method of standard additions to determine H2O2 concentrations in an unknown sample. Overall, this experiment offers an integrated and cohesive experience that connects many important electroanalytical concepts that are often taught individually into one 3 h, hands-on laboratory experiment that requires minimal resources.

Solution-Processed Polymer Dielectric Interlayer for Low-Voltage, Unipolar n-Type Organic Field-Effect Transistors

The integration of organic electronic circuits into real-life applications compels the fulfillment of a range of requirements, among which the ideal operation at a low voltage with reduced power consumption is paramount. Moreover, these performance factors should be achieved via solution-based fabrication schemes in order to comply with the promise of cost- and energy-efficient manufacturing offered by an organic, printed electronic technology. Here, we propose a solution-based route for the fabrication of low-voltage organic transistors, encompassing ideal device operation at voltages below 5 V and exhibiting n-type unipolarization. This process is widely applicable to a variety of semiconducting and dielectric materials. We achieved this through the use of a photo-cross-linked, low-k dielectric interlayer, which is used to fabricate multilayer dielectric stacks with areal capacitances of up to 40 nF/cm2 and leakage currents below 1 nA/cm2. Because of the chosen azide-based cross-linker, the dielectric promotes n-type unipolarization of the transistors and demonstrated to be compatible with different classes of semiconductors, from conjugated polymers to carbon nanotubes and low-temperature metal oxides. Our results demonstrate a general applicability of our unipolarizing dielectric, facilitating the implementation of complementary circuitry of emerging technologies with reduced power consumption.

Interface-Engineered Field-Effect Transistor Electronic Devices for Biosensing

Promising advances in molecular medicine have promoted the urgent requirement for reliable and sensitive diagnostic tools. Electronic biosensing devices based on field-effect transistors (FETs) exhibit a wide range of benefits, including rapid and label-free detection, high sensitivity, easy operation, and capability of integration, possessing significant potential for application in disease screening and health monitoring. In this perspective, the tremendous efforts and achievements in the development of high-performance FET biosensors in the past decade are summarized, with emphasis on the interface engineering of FET-based electrical platforms for biomolecule identification. First, an overview of engineering strategies for interface modulation and recognition element design is discussed in detail. For a further step, the applications of FET-based electrical devices for in vitro detection and real-time monitoring in biological systems are comprehensively reviewed. Finally, the key opportunities and challenges of FET-based electronic devices in biosensing are discussed. It is anticipated that a comprehensive understanding of interface engineering strategies in FET biosensors will inspire additional techniques for developing highly sensitive, specific, and stable FET biosensors as well as emerging designs for next-generation biosensing electronics.

Organic Electronics in Biosensing: A Promising Frontier for Medical and Environmental Applications

The promising field of organic electronics has ushered in a new era of biosensing technology, thus offering a promising frontier for applications in both medical diagnostics and environmental monitoring. This review paper provides a comprehensive overview of organic electronics' remarkable progress and potential in biosensing applications. It explores the multifaceted aspects of organic materials and devices, thereby highlighting their unique advantages, such as flexibility, biocompatibility, and low-cost fabrication. The paper delves into the diverse range of biosensors enabled by organic electronics, including electrochemical, optical, piezoelectric, and thermal sensors, thus showcasing their versatility in detecting biomolecules, pathogens, and environmental pollutants. Furthermore, integrating organic biosensors into wearable devices and the Internet of Things (IoT) ecosystem is discussed, wherein they offer real-time, remote, and personalized monitoring solutions. The review also addresses the current challenges and future prospects of organic biosensing, thus emphasizing the potential for breakthroughs in personalized medicine, environmental sustainability, and the advancement of human health and well-being.

Efficient N-Type Organic Electrochemical Transistors and Field-Effect Transistors Based on PNDI-Copolymers Bearing Fluorinated Selenophene-Vinylene-Selenophenes

n-Type organic electrochemical transistors (OECTs) and organic field-effect transistors (OFETs) are less developed than their p-type counterparts. Herein, polynaphthalenediimide (PNDI)-based copolymers bearing novel fluorinated selenophene-vinylene-selenophene (FSVS) units as efficient materials for both n-type OECTs and n-type OFETs are reported. The PNDI polymers with oligo(ethylene glycol) (EG7) side chains P(NDIEG7-FSVS), affords a high µC* of > 0.2 F cm-1  V-1  s-1 , outperforming the benchmark n-type Pg4NDI-T2 and Pg4NDI-gT2 by two orders of magnitude. The deep-lying LUMO of -4.63 eV endows P(NDIEG7-FSVS) with an ultra-low threshold voltage of 0.16 V. Moreover, the conjugated polymer with octyldodecyl (OD) side chains P(NDIOD-FSVS) exhibits a surprisingly low energetic disorder with an Urbach energy of 36 meV and an ultra-low activation energy of 39 meV, resulting in high electron mobility of up to 0.32 cm2  V-1  s-1 in n-type OFETs. These results demonstrate the great potential for simultaneously achieving a lower LUMO and a tighter intermolecular packing for the next-generation efficient n-type organic electronics.

Facile Synthesis of Iron and Nitrogen Co-Doped Carbon Dot Nanozyme as Highly Efficient Peroxidase Mimics for Visualized Detection of Metabolites

Visual detection based on nanozymes has great potential for the rapid detection of metabolites in clinical analysis or home-based health management. In this work, iron and nitrogen co-doped carbon dots (Fe,N-CDs) were conveniently synthesized as a nanozyme for the visual detection of glucose (Glu) or cholesterol (Chol). Using inexpensive and readily available precursors, Fe,N-CDs with peroxidase-like activity were conveniently prepared through a simple hydrothermal method. Co-doping of Fe and N atoms enhanced the catalytic activity of the nanozyme. The nanozyme had a low Michaelis constant (Km) of 0.23 mM when hydrogen peroxide (H2O2) was used as the substrate. Free radical trapping experiments revealed that the reactive oxygen species (ROS) generated in the nanozyme-catalyzed process were superoxide anion radicals (•O2-), which can oxidize colorless 3,3',5,5'-tetramethylbenzidine (TMB) to generate blue oxidation product (ox-TMB) with characteristics absorbance at 652 nm. Based on this mechanism, a colorimetric sensor was constructed to detect H2O2 ranging from 0.1 μM to 200 μM with a detection limit (DL) of 75 nM. In the presence of glucose oxidase (Gox) or Chol oxidase (Chox), Glu or Chol was oxidized, respectively, and generated H2O2. Based on this, indirect detection of Glu and Chol was realized with linear detection ranges of 5-160 μM and 2-200 μM and DLs of 2.8 μM and 0.8 μM, respectively. A paper-based visual detection platform was fabricated using Fe,N-CDs as nanozyme ink to prepare testing paper by inkjet printing. Using a smartphone to record the RGB values of the testing paper after the reaction, visual detection of Glu and Chol can be achieved with linear detection ranges of 5-160 μM (DL of 3.3 μM) and 2-200 μM (DL of 1.0 μM), respectively.

Hybridization Chain Reaction-Enhanced Biocatalytic Precipitation on Flower-like Bi2S3: Toward Organic Photoelectrochemical Transistor Aptasensing with High Transconductance

Organic photoelectrochemical transistor (OPECT) bioanalysis has recently emerged as a promising avenue for biomolecular sensing, providing insight into the next-generation of photoelectrochemical biosensing and organic bioelectronics. Herein, this work validates the direct enzymatic biocatalytic precipitation (BCP) modulation on a flower-like Bi₂S₃ photosensitive gate for high-efficacy OPECT operation with high transconductance (g_m), which is exemplified by a prostate-specific antigen (PSA)-dependent hybridization chain reaction (HCR) and subsequent alkaline phosphatase (ALP)-enabled BCP reaction toward PSA aptasensing. It has been shown that light illumination could ideally achieve the maximized g_m at zero gate bias, and BCP could efficiently modulate the device's interfacial capacitance and charge-transfer resistance, resulting in a significantly changed channel current (I_DS). The as-developed OPECT aptasensor realizes good analysis performance for PSA with a detection limit of 10 fg mL^-1. This work features direct BCP modulation of organic transistors and is expected to stimulate further interest in exploring advanced BCP-interfaced bioelectronics with unknown possibilities.

Preparation and quantitative analysis of multicenter luminescence materials for sensing function

Luminescent sensing materials are attractive for environmental analysis due to their potential for high selectivity, excellent sensitivity and rapid (even instantaneous) response towards targeted analytes in diverse sample matrices. Many types of analytes have been detected in samples of wastewater for environmental protection, reagents and products in industrial production of drugs and pesticides, and biological markers in blood and urine for early diagnosis. It is still challenging, however, to develop appropriate materials with optimal sensing function for a targeted analyte. Here we synthesize metal-organic frameworks (MOFs) bearing multiple luminescent centers, such as metal cations (for example, Eu3+ and Tb3+), organic ligands and guests, which are chosen for optimal selectivity for the analytes of interest, including industrial synthetic intermediates and chiral drugs. Interaction between the metal node, ligand, guest and analyte results in a complex system with different luminescence properties compared with the porous MOF on its own. The operation time for the synthesis is usually less than 4 h; the quick screening for sensitivity and selectivity takes ~0.5 h and includes steps to optimize the energy levels and spectrum parameters. It can be used to accelerate the discovery of advanced sensing materials for practical applications.

Aqueous processing of organic semiconductors enabled by stable nanoparticles with built-in surfactants

The introduction of oligoether side chains onto a polymer backbone can help to stabilise polymeric dispersions in water without the necessity of surfactants or additives when conjugated polymer nanoparticles are prepared. A series of poly(3-hexylthiophene) (P3HT) derivatives with different content of a polar thiophene derivative 3-((2-methoxyethoxy)methyl)thiophene was interrogated to find the effect of the polar chains on the stability of the formed nanoparticles, as well as their structural, optical, electrochemical, and electrical properties. Findings indicated that incorporation of 10-20 percent of the polar side chain led to particles that are stable over a period of 42 days, with constant particle size and polydispersity, however the particles from the polymer with 30 percent polar side chain showed aggregation effects. The polymer dispersions showed a stronger solid-like behaviour in water with decreasing polar side chain content, while thin film deposition from water was found to afford globular morphologies and crystallites with more isotropic orientation compared to conventional solution-processed films. As a proof-of-principle, field-effect transistors were fabricated directly from the aqueous dispersions demonstrating that polymers with hydrophilic moieties can be processed in water without the requirement of surfactants.

Water-soluble conjugated polymers for bioelectronic systems

Bioelectronics is an interdisciplinary field of research that aims to establish a synergy between electronics and biology. Contributing to a deeper understanding of bioelectronic processes and the built bioelectronic systems, a variety of new phenomena, mechanisms and concepts have been derived in the field of biology, medicine, energy, artificial intelligence science, etc. Organic semiconductors can promote the applications of bioelectronics in improving original performance and creating new features for organisms due to their excellent photoelectric and electrical properties. Recently, water-soluble conjugated polymers (WSCPs) have been employed as a class of ideal interface materials to regulate bioelectronic processes between biological systems and electronic systems, relying on their satisfying ionic conductivity, water-solubility, good biocompatibility and the additional mechanical and electrical properties. In this review, we summarize the prominent contributions of WSCPs in the aspect of the regulation of bioelectronic processes and highlight the latest advances in WSCPs for bioelectronic applications, involving biosynthetic systems, photosynthetic systems, biophotovoltaic systems, and bioelectronic devices. The challenges and outlooks of WSCPs in designing high-performance bioelectronic systems are also discussed.

Engineering Multi-Scale Organization for Biotic and Organic Abiotic Electroactive Systems

Multi-scale organization of molecular and living components is one of the most critical parameters that regulate charge transport in electroactive systems-whether abiotic, biotic, or hybrid interfaces. In this article, an overview of the current state-of-the-art for controlling molecular order, nanoscale assembly, microstructure domains, and macroscale architectures of electroactive organic interfaces used for biomedical applications is provided. Discussed herein are the leading strategies and challenges to date for engineering the multi-scale organization of electroactive organic materials, including biomolecule-based materials, synthetic conjugated molecules, polymers, and their biohybrid analogs. Importantly, this review provides a unique discussion on how the dependence of conduction phenomena on structural organization is observed for electroactive organic materials, as well as for their living counterparts in electrogenic tissues and biotic-abiotic interfaces. Expansion of fabrication capabilities that enable higher resolution and throughput for the engineering of ordered, patterned, and architecture electroactive systems will significantly impact the future of bioelectronic technologies for medical devices, bioinspired harvesting platforms, and in vitro models of electroactive tissues. In summary, this article presents how ordering at multiple scales is important for modulating transport in both the electroactive organic, abiotic, and living components of bioelectronic systems.

Interactions of Catalytic Enzymes with n-Type Polymers for High-Performance Metabolite Sensors

The tight regulation of the glucose concentration in the body is crucial for balanced physiological function. We developed an electrochemical transistor comprising an n-type conjugated polymer film in contact with a catalytic enzyme for sensitive and selective glucose detection in bodily fluids. Despite the promise of these sensors, the property of the polymer that led to such high performance has remained unknown, with charge transport being the only characteristic under focus. Here, we studied the impact of the polymer chemical structure on film surface properties and enzyme adsorption behavior using a combination of physiochemical characterization methods and correlated our findings with the resulting sensor performance. We developed five n-type polymers bearing the same backbone with side chains differing in polarity and charge. We found that the nature of the side chains modulated the film surface properties, dictating the extent of interactions between the enzyme and the polymer film. Quartz crystal microbalance with dissipation monitoring studies showed that hydrophobic surfaces retained more enzymes in a densely packed arrangement, while hydrophilic surfaces captured fewer enzymes in a flattened conformation. X-ray photoelectron spectroscopy analysis of the surfaces revealed strong interactions of the enzyme with the glycolated side chains of the polymers, which improved for linear side chains compared to those for branched ones. We probed the alterations in the enzyme structure upon adsorption using circular dichroism, which suggested protein denaturation on hydrophobic surfaces. Our study concludes that a negatively charged, smooth, and hydrophilic film surface provides the best environment for enzyme adsorption with desired mass and conformation, maximizing the sensor performance. This knowledge will guide synthetic work aiming to establish close interactions between proteins and electronic materials, which is crucial for developing high-performance enzymatic metabolite biosensors and biocatalytic charge-conversion devices.

A guide for the characterization of organic electrochemical transistors and channel materials

The organic electrochemical transistor (OECT) is one of the most versatile devices within the bioelectronics toolbox, with its compatibility with aqueous media and the ability to transduce and amplify ionic and biological signals into an electronic output. The OECT operation relies on the mixed (ionic and electronic charge) conduction properties of the material in its channel. With the increased popularity of OECTs in bioelectronics applications and to benchmark mixed conduction properties of channel materials, the characterization methods have broadened somewhat heterogeneously. We intend this review to be a guide for the characterization methods of the OECT and the channel materials used. Our review is composed of two main sections. First, we review techniques to fabricate the OECT, introduce different form factors and configurations, and describe the device operation principle. We then discuss the OECT performance figures of merit and detail the experimental procedures to obtain these characteristics. In the second section, we shed light on the characterization of mixed transport properties of channel materials and describe how to assess films' interactions with aqueous electrolytes. In particular, we introduce experimental methods to monitor ion motion and diffusion, charge carrier mobility, and water uptake in the films. We also discuss a few theoretical models describing ion-polymer interactions. We hope that the guidelines we bring together in this review will help researchers perform a more comprehensive and consistent comparison of new materials and device designs, and they will be used to identify advances and opportunities to improve the device performance, progressing the field of organic bioelectronics.

Quantitative Prediction of Charge Mobilities and Theoretical Insight into the Regulation of Site-Specific Trifluoromethylethynyl Substitution to Electronic and Charge Transport Properties of 9,10-Anthraquinone

Herein, we systematically studied the electronic and conducting properties of 9,10-anthraquinone (AQ) and its derivatives and discussed the substitute-site effects on their organic field-effect transistor (OFET) properties in detail. Our calculation results show the influence of different substitute sites on the ionization potential (IP), electronic affinity (EA), reorganization energy (λ), electronic couplings (V), and anisotropic mobility (μ) of semiconducting materials, which mainly originates from the variations of the frontier molecular orbital charge distributions, the steric hindrance, and the conjugate degree. Combining quantum-chemical calculations with charge transfer theory, we simulated the intermolecular hopping rate in the organic crystals of AQ derivatives and predicted the fluctuation range of three-dimensional (3D) anisotropic charge carrier mobility for the first time. Our calculation results well reproduced the experimental observations and provided evidence for the determination of the optimal OFET conduction plane and channel direction relative to the crystal axis.

"Clickable" Organic Electrochemical Transistors

Interfacing the surface of an organic semiconductor with biological elements is a central quest when it comes to the development of efficient organic bioelectronic devices. Here, we present the first example of "clickable" organic electrochemical transistors (OECTs). The synthesis and characterization of an azide-derivatized EDOT monomer (azidomethyl-EDOT, EDOT-N₃) are reported, as well as its deposition on Au-interdigitated electrodes through electropolymerization to yield PEDOT-N₃-OECTs. The electropolymerization protocol allows for a straightforward and reliable tuning of the characteristics of the OECTs, yielding transistors with lower threshold voltages than PEDOT-based state-of-the-art devices and maximum transconductance voltage values close to 0 V, a key feature for the development of efficient organic bioelectronic devices. Subsequently, the azide moieties are employed to click alkyne-bearing molecules such as redox probes and biorecognition elements. The clicking of an alkyne-modified PEG₄-biotin allows for the use of the avidin-biotin interactions to efficiently generate bioconstructs with proteins and enzymes. In addition, a dibenzocyclooctyne-modified thrombin-specific HD22 aptamer is clicked on the PEDOT-N₃-OECTs, showing the application of the devices toward the development of organic transistors-based biosensors. Finally, the clicked OECTs preserve their electronic features after the different clicking procedures, demonstrating the stability and robustness of the fabricated transistors.

Emerging biotransduction strategies on soft interfaces for biosensing

As a lab-on-soft biochip providing accurate and timely biomarker information, wearable biosensors can satisfy the increasing demand for intelligent e-health services, active disease diagnosis/therapy, and huge bioinformation data. As biomolecules generally could not directly produce detectable signals, biotransducers that specifically convert biomolecules to electrical or optical signals are involved, which determines the pivotal sensing performance including 3S (sensitivity, selectivity, and stability), reversibility, etc. The soft interface poses new requirements for biotransducers, especially equipment-free, facile operation, mechanical tolerance, and high sensing performance. In this review, we discussed the emerging electrochemical and optical biotransduction strategies on wearables from the aspects of the transduction mechanism, amplification strategies, biomaterial selection, and device fabrication procedures. Challenges and perspectives regarding future biotransducers for monitoring trace amounts of biomolecules with high fidelity, sensitivity, and multifunctionality are also discussed. It is expected that through fusion with functional electronics, wearable biosensors can provide possibilities to further decentralize the healthcare system and even build biomolecule-based intelligent cyber-physical systems and new modalities of cyborgs.

Electronically Conductive Hydrogels by in Situ Polymerization of a Water-Soluble EDOT-Derived Monomer

Electronically conductive hydrogels have gained popularity in bioelectronic interfaces because their mechanical properties are similar to biological tissues, potentially preventing scaring in implanted electronics. Hydrogels have low elastic moduli, due to their high water content, which facilitates their integration with biological tissues. To achieve electronically conductive hydrogels, however, requires the integration of conducting polymers or nanoparticles. These “hard” components increase the elastic modulus of the hydrogel, removing their desirable compatibility with biological tissues, or lead to the heterogeneous distribution of the conductive material in the hydrogel scaffold. A general strategy to transform hydrogels into electronically conductive hydrogels without affecting the mechanical properties of the parent hydrogel is still lacking. Herein, a two‐step method is reported for imparting conductivity to a range of different hydrogels by in‐situ polymerization of a water‐soluble and neutral conducting polymer precursor: 3,4–ethylenedioxythiophene diethylene glycol (EDOT‐DEG). The resulting conductive hydrogels are homogenous, have conductivities around 0.3 S m−1, low impedance, and maintain an elastic modulus of 5–15 kPa, which is similar to the preformed hydrogel. The simple preparation and desirable properties of the conductive hydrogels are likely to lead to new materials and applications in tissue engineering, neural interfaces, biosensors, and electrostimulation.

Overview of Biofluids and Flow Sensing Techniques Applied in Clinical Practice

This review summarizes the current knowledge on biofluids and the main flow sensing techniques applied in healthcare today. Since the very beginning of the history of medicine, one of the most important assets for evaluating various human diseases has been the analysis of the conditions of the biofluids within the human body. Hence, extensive research on sensors intended to evaluate the flow of many of these fluids in different tissues and organs has been published and, indeed, continues to be published very frequently. The purpose of this review is to provide researchers interested in venturing into biofluid flow sensing with a concise description of the physiological characteristics of the most important body fluids that are likely to be altered by diverse medical conditions. Similarly, a reported compilation of well-established sensors and techniques currently applied in healthcare regarding flow sensing is aimed at serving as a starting point for understanding the theoretical principles involved in the existing methodologies, allowing researchers to determine the most suitable approach to adopt according to their own objectives in this broad field.

Cyano-Functionalized n-Type Polymer with High Electron Mobility for High-Performance Organic Electrochemical Transistors

n-Type organic mixed ionic-electronic conductors (OMIECs) with high electron mobility are scarce and highly challenging to develop. As a result, the figure-of-merit (µC*) of n-type organic electrochemical transistors (OECTs) lags far behind the p-type analogs, restraining the development of OECT-based low-power complementary circuits and biosensors. Here, two n-type donor-acceptor (D-A) polymers based on fused bithiophene imide dimer f-BTI2 as the acceptor unit and thienylene-vinylene-thienylene (TVT) as the donor co-unit are reported. The cyanation of TVT enables polymer f-BTI2g-TVTCN with simultaneously enhanced ion-uptake ability, film structural order, and charge-transport property. As a result, it is able to obtain a high volumetric capacitance (C*) of 170 ± 22 F cm^-3 and a record OECT electron mobility (μ_e,OECT ) of 0.24 cm² V^-1 s^-1 for f-BTI2g-TVTCN, subsequently achieving a state-of-the-art µC* of 41.3 F cm^-1 V^-1 s^-1 and geometry-normalized transconductance (g_m,norm ) of 12.8 S cm^-1 in n-type accumulation-mode OECTs. In contrast, only a moderate µC* of 1.50 F cm^-1 V^-1 s^-1 is measured for the non-cyanated polymer f-BTI2g-TVT. These remarkable results demonstrate the great power of cyano functionalization of polymer semiconductors in developing n-type OMIECs with substantial electron mobility in aqueous environment for high-performance n-type OECTs.

Nanomaterials-assisted metabolic analysis toward in vitro diagnostics

In vitro diagnostics (IVD) has played an indispensable role in healthcare system by providing necessary information to indicate disease condition and guide therapeutic decision. Metabolic analysis can be the primary choice to facilitate the IVD since it characterizes the downstream metabolites and offers real-time feedback of the human body. Nanomaterials with well-designed composition and nanostructure have been developed for the construction of high-performance detection platforms toward metabolic analysis. Herein, we summarize the recent progress of nanomaterials-assisted metabolic analysis and the related applications in IVD. We first introduce the important role that nanomaterials play in metabolic analysis when coupled with different detection platforms, including electrochemical sensors, optical spectrometry, and mass spectrometry. We further highlight the nanomaterials-assisted metabolic analysis toward IVD applications, from the perspectives of both the targeted biomarker quantitation and untargeted fingerprint extraction. This review provides fundamental insights into the function of nanomaterials in metabolic analysis, thus facilitating the design of next-generation diagnostic devices in clinical practice.