Activation CuFe2O4 by Hydroxylamine for Oxidation of Antibiotic Sulfamethoxazole

Regular-Hexahedron-Shaped Iron-Copper Bimetallic Oxides Engineered on Plasma-Treated Iron Foam for Enhanced Electrocatalytic Oxygen Evolution in an Alkaline Medium

Designing a highly efficient transition-metal-based electrocatalyst for the oxygen evolution reaction (OER) in an alkaline electrolyte by a green and low-cost protocol is still facing many challenges. Herein, a regular-hexahedron-shaped iron-copper oxide (CuFe2O4-Fe2O3) is engineered on plasma-treated iron foam (PFF) with a one-step hydrothermal process. Benefiting from the formed rich heterointerfaces, the obtained CuFe2O4-Fe2O3/PFF exhibits an outstanding OER activity and stability in the alkaline medium, and the overpotential for delivering a current density of 10 mA cm-2 (j10) is only 190 mV. Meanwhile, thanks to the micronized hexahedron profile, CuFe2O4-Fe2O3/PFF also shows an excellent electrocatalytic stability, and the OER activity decays only 8% after a 90 h OER test under a high current density (j100). Furthermore, the theory calculation (DFT) indicates that Fe sites exposed on the heterointerface of CuFe2O4 and Fe2O3 are the main active centers for O2 evolution in an alkaline medium.

Bicarbonate boosts the anaerobic generation of reactive oxygen species by hydrochar: Surface oxygenated functional groups activation and hexavalent chromium removal

Hydrochar can generate reactive oxygen species (ROS) via activating molecular oxygen under sunlight. However, whether and how hydrochar generates ROS in the dark and anaerobic environments remains unknown. Herein, we found that combining hydrochar with the co-existing bicarbonate could generate superoxide radicals (O2•-) under alkaline conditions, with the maximum concentration reaching 24.7 μmol L-1. Interestingly, the O2•-generation was not affected by eliminating the molecular oxygen but highly depended on the abundance of the oxygenated functional groups (OFGs) on hydrochar surface. The results of electrochemical analysis, density functional theory calculation, and surface characterization elucidated that the bicarbonate first inner-sphere complexed with surface OFGs, followed by the electron transfer from bicarbonate to OFGs. This enabled the activation of oxygen inside OFGs into active oxygen (O*) while bicarbonate was oxidized to carbonate radical (CO3•-). The CO3•- further reacts with O* through an oxygen transfer mechanism, resulting in the generation of O2•-. The generated O2•- was used for the Cr(VI) treatment, which could efficiently reduce over 95 % into Cr(III). The findings provide a novel pathway for developing hydrochar-based advanced oxidation processes and highlight the potential of hydrochar in pollutant transformation mediated by ROS in dark and anaerobic water environments.

Insights into the Restoration of Micropolluted Groundwater by Pyrite: The Contribution of Fe(IV) and Outer-Sphere Electron Transfer

Pyrite has been investigated for its potential to modulate the redox microenvironment of groundwater porous media through self-activation. However, the self-purification process of the contaminants by pyrite after their migration from surface water to groundwater has been neglected. This process is accompanied by a decrease in pollutant concentration with a transition from aerobic to anaerobic environments. Here, we selected sulfamethoxazole (SMX), a micropollutant frequently detected in groundwater, as a modeled micropollutant for the investigation. The findings indicate that pyrite could degrade micropollutants SMX (20 μg/L) by self-activation with nearly 100% degradation efficiency under anaerobic conditions. It was also found that •OH was not the primary reactive oxygen species (ROS), but rather the longer-lived and more stable Fe(IV) generated by •OHad-mediated oxidation of structural Fe(III). Additionally, SMX can be degraded by outer-sphere electron transfer with dissolved Fe3+ in the system. Whereas, the reduction product Fe2+ facilitates the supply of electrons to pyrite and promotes the production of Fe (IV). The contributions of Fe(IV) and outer-sphere electron transfer to SMX degradation were 67.5% and 32.5%, respectively. Furthermore, pyrite self-activation exhibited selective oxidation of electron-rich pollutants under anaerobic conditions. This finding provides a new insight into the self-purification of micropollutants in groundwater environments.

Enhanced sludge dewaterability and confined antibiotics degradation in biochar-mediated chemical conditioning through modulating Fe oxidative states distribution and reaction sites in multiphase

For antibiotic-enriched waste activated sludge, classical iron-based chemical conditioning significantly enhanced sludge dewaterability. Nevertheless, the intricate constituents within sludge rapidly depleted reactive oxygen species (ROS), leading to challenges such as excessive production of iron sludge and inadequate elimination of antibiotics from sludge. Herein, we proposed an innovative strategy integrating biochar with Fe(II) for peroxymonosulfate (PMS) activation, aiming to enhance both sludge dewaterability and antibiotics elimination simultaneously. Compared to classical chemical conditioning of Fe(II)/PMS, the presence of biochar not only reduced bound water content of sludge from 1.36 g/g DS to 0.97 g/g DS, but also enhanced sulfamethoxazole (SMX) degradation rate constant from 0.015 min-1 to 0.042 min-1. Mechanism studies disclosed the essential roles of biochar in modulating Fe oxidative states distribution and reaction sites in multiphase. Initially, biochar elevated Fe(II)/Fe(III) ratio from 0.38 to 0.78 by abundant carbon defects, which significantly promoted the cumulative concentration of predominant ROS, hydroxyl radicals (•OH), from 4.6 mM to 8.1 mM. Subsequently, EPS underwent destruction by •OH, leading to the liberation of antibiotics and negatively charged polysaccharides (PS), proteins (PN). Secondly, biochar enriched hydrophobic PN with an elevated ratio of PN/PS from 0.92 to 1.50, while the charge neutralization occurred between Fe(II)/Fe(III) and PN, PS, leading to sludge particles granulation. Finally, the mesoporous structure of biochar not only achieved SMX enrichment, but also enhanced the mass transfer of Fe(II)/Fe(III) from sludge aqueous phase to its surface, ensuring that the in-situ generated •OH efficiently targets the locally concentrated SMX. Overall, this work provides a new guidance for developing biochar-mediated chemical conditioning, aiming to enhance the generation and utilization of •OH for antibiotics elimination from sludge.

Electrochemical degradation of aromatic organophosphate esters: Mechanisms, toxicity changes, and ecological risk assessment

Aromatic organophosphate esters (AOPEs), including triphenyl phosphate (TPHP), tricresyl phosphate (TCP), and 2-ethylhexyl diphenyl phosphate (EHDPP), pose significant health and ecological risks. Electrochemical advanced oxidation process (EAOP) is effective in removing refractory pollutants. In this study, the degradation performance and detoxication ability of AOPEs by EAOP were investigated. Hydroxylation, oxidation, and bond cleavage products were identified as major degradation products (DPs) due to the reaction with ·OH and O₂·-. Toxicity assessments using ecological structure activity relationship (ECOSAR) model and flow cytometry (FCM) revealed the cytotoxicity and aquatic toxicity for DPs were significantly decreased. 16S rRNA gene sequencing of sediment exposure to AOPEs and DPs were applied to assess ecological toxicity, and results showed reduced bacterial richness and diversity with EHDPP and TCP, while TPHP slightly enhanced richness. AOPEs and DPs altered bacterial genera involved in carbon, nitrogen, sulfur cycling and organic compound degradation. Bacterial community assembly suggested elevated stochastic processes and reduced ecotoxicity, confirming AOPEs can be effectively detoxified by 10-min EAOP treatment. Molecular ecological network analysis indicated increased complexity and stability of bacterial communities with DPs. These findings comprehensively revealed the toxicity of AOPEs and their DPs and provided the first evidence of effective degradation and detoxification by EAOP from ecotoxicological perspective.

Efficient Degradation of Ofloxacin by Magnetic CuFe2O4 Coupled PMS System: Optimization, Degradation Pathways and Toxicity Evaluation

Magnetic CuFe2O4 was prepared with the modified sol-gel method and used for enhanced peroxymonosulfate (PMS) activation and ofloxacin (OFL) degradation. The OFL could almost degrade within 30 min at a catalyst dosage of 0.66 g/L, PMS concentration of 0.38 mM, and initial pH of 6.53 without adjustment, using response surface methodology (RSM) with Box-Behnken design (BBD). In the CuFe2O4/PMS system, the coexisting substances, including CO32-, NO3-, SO42-, Cl- and humic acid, have little effect on the OFL degradation. The system also performs well in actual water, such as tap water and surface water (Mei Lake), indicating the excellent anti-interference ability of the system. The cyclic transformation between Cu(II)/Cu(I) and Fe(III)/Fe(II) triggers the generation of active radicals including SO4•-, •OH, •O2- and 1O2. The OFL degradation pathway, mainly involving the dehydrogenation, deamination, hydroxylation, decarboxylation and carboxylation processes, was proposed using mass spectroscopy. Moreover, the toxicity assessment indicated that the end intermediates are environmentally friendly. This study is about how the CuFe2O4/PMS system performs well in PMS activation for refractory organic matter removal in wastewater.

Mechanism of adsorption and targeted degradation of antimicrobial micropollutant sulfamethoxazole in aquatic environments

FHWSB as an integrated absorptive catalyst, based on Walnut shell biochar (WSB) via hydrochloric acid modification and ferrous chloride impregnation, was prepared, reacted with H2O2 to generate active free radicals •OH and •O2-, which oxidized and degraded about 80% of micro-pollutant sulfamethoxazole (SMX) from water, effectively resolving micro-pollutants' removal being inefficient because of high toxicity, persistence, and bioaccumulation in existed methods. It was clarified the specific degradation pathways and mechanisms of SMX by FHWSB synergistic H2O2 via characterization and analysis assisted DFT calculations. Furthermore, it was found that the toxicity of a series of intermediates produced by SMX degraded continued to decline, consistent with its direction of degradation via toxicological analysis. The work provides a simple and feasible strategy for the effective removal of antibiotic micro-pollutants in aquatic environments.

Intermittent aeration mitigating carbon emission from landfills with gas-water joint regulation

Landfill is a significant source of atmospheric CH4 and CO2 emissions. In this study, four landfill reactor systems were constructed to investigate the effects of different ventilation methods, including continuous aeration (20 h d-1) and intermittent aeration (continuous aeration for 4 h d-1 and 2 h of aeration every 12 h, twice a day), on properties of landfilled waste and emissions of CH4 and CO2, in comparison to a traditional landfill. Compared with continuous aeration, intermittent aeration could reduce the potential global warming effect of the CH4 and CO2 emissions, especially multiple intermittent aeration. The CH4 and CO2 emissions could be predicted by the multiple linear regression model based on the contents of carbon, sulfur and/or pH during landfill stabilization. Both intermittent and continuous aeration could enhance the methane oxidation activity of landfilled waste. The aerobic methane oxidation activity of landfilled waste reached the maximums of 50.77-73.78 μg g-1 h-1 after aeration for 5 or 15 d, which was higher than the anaerobic methane oxidation activity (0.45-1.27 μg g-1 h-1). CO2 was the predominant form of organic carbon loss in the bioreactor landfills. Candidatus Methylomirabilis, Methylobacter, Methylomonas and Crenothrix were the main methane-oxidating microorganisms (MOM) in the landfills. Total, NO2--N, pH and Fe3+ were the main environmental variables influencing the MOM community, among which NO2--N and pH had the significant impact on the MOM community. Partial least squares path modelling indicated that aeration modes mainly influenced the emissions of CH4 and CO2 by affecting the degradation of landfilled waste, environmental variables and microbial activities. The results would be helpful for designing aeration systems to reduce the emissions of CH4 and CO2, and the cost during landfill stabilization.

Boosting the degradation of antibiotics via peroxymonosulfate activation with a Cu-based metal-organic framework

Highly efficient degradation of antibiotics is a huge challenge due to the extremely stable molecules and the potential for biological resistance. However, conventional degradation methods are limited to lower degradation rate, higher energy consumption and secondary pollution. Herein, we report a new Cu-based metal-organic framework (MOF), featuring classical planar trinuclear [Cu3(µ3-O)]4+ clusters within the pores. The presence of the rich open metal sites and the large pore ratio, as well as the high catalytic activity of Cu2+ ions, are conducive to boosting the degradation of various antibiotics (>95%) under the activation of peroxymonosulfate. Remarkably, this is the first MOF to achieve such exceptional catalytic performance under neutral and even alkaline conditions, which exceeds those of most reported materials. Mechanism investigation demonstrates that multiple active species were produced and promoted the degradation synergistically during the advanced oxidation processes.

Were Persulfate-Based Advanced Oxidation Processes Really Understood? Basic Concepts, Cognitive Biases, and Experimental Details

Persulfate (PS)-based advanced oxidation processes (AOPs) for pollutant removal have attracted extensive interest, but some controversies about the identification of reactive species were usually observed. This critical review aims to comprehensively introduce basic concepts and rectify cognitive biases and appeals to pay more attention to experimental details in PS-AOPs, so as to accurately explore reaction mechanisms. The review scientifically summarizes the character, generation, and identification of different reactive species. It then highlights the complexities about the analysis of electron paramagnetic resonance, the uncertainties about the use of probes and scavengers, and the necessities about the determination of scavenger concentration. The importance of the choice of buffer solution, operating mode, terminator, and filter membrane is also emphasized. Finally, we discuss current challenges and future perspectives to alleviate the misinterpretations toward reactive species and reaction mechanisms in PS-AOPs.

Why is HSO5- so effective against bacteria? Insights into the mechanisms of Escherichia coli disinfection by unactivated peroxymonosulfate

This study examined the antimicrobial efficacy of peroxymonosulfate (PMS) against bacteria, using Escherichia coli (E. coli) as a model organism. Our investigation delineates the complex mechanisms exerted by unactivated PMS. Thus, an initial redox reaction between PMS and the target biomolecules of bacteria generates SO4•- as the pivotal reactive species for bacterial inactivation; to a lesser extent, •OH, 1O2, or O2•- may also participate. Damage generated during oxidation was identified using an array of biochemical techniques. Specifically, redox processes are promoted by PMS and SO4•- targets and disrupt various components of bacterial cells, predominantly causing extracellular damage as well as intracellular lesions. Among these, external events are the key to cell death. Finally, by employing gene knockout mutants, we uncovered the role of specific gene responses in the intracellular damage induced by radical pathways. The findings of this study not only expand the understanding of PMS-mediated bacterial inactivation but also explain the ten-fold higher effectiveness of PMS than that reported for H2O2. Hence, we provide clear evidence that unactivated PMS solutions generate SO4•- in the presence of bacteria, and consequently, should be considered an effective disinfection method.

An insight into the role of experimental parameters in advanced oxidation process applied for pharmaceutical degradation

The advanced oxidation process (AOP) is an efficient method to treat recalcitrance pollutants such as pharmaceutical compounds. The essential physicochemical factors in AOP experiments significantly influence the efficiency, speed, cost, and safety of byproducts of the treatment process. In this review, we collected recent articles that investigated the elimination of pharmaceutical compounds by various AOP systems in a water medium, and then we provide an overview of AOP systems, the formation mechanisms of active radicals or reactive oxygen species (ROS), and their detection methods. Then, we discussed the role of the main physicochemical parameters (pH, chemical interference, temperature, catalyst, pollutant concentration, and oxidant concentration) in a critical way. We gained insight into the most frequent scenarios for the proper and improper physicochemical parameters for the degradation of pharmaceutical compounds. Also, we mentioned the main factors that restrict the application of AOP systems in a commercial way. We demonstrated that a proper adjustment of AOP experimental parameters resulted in promoting the treatment performance, decreasing the treatment cost and the treatment operation time, increasing the safeness of the system products, and improving the reaction stoichiometric efficiency. The outcomes of this review will be beneficial for future AOP applicants to improve the pharmaceutical compound treatment by providing a deeper understanding of the role of the parameters. In addition, the proper application of physicochemical parameters in AOP systems acts to track the sustainable development goals (SDGs).

Plastic wastes-derived N-doped carbon nanotubes for efficient removal of sulfamethoxazole in high salinity wastewater via nonradical peroxymonosulfate activation

Peroxymonosulfate (PMS) catalytic activation is effective to eliminate organic pollutants from water, thus the development of low-cost and efficient catalysts is significant in applications. The resource conversion of plastic wastes (PWs) into carbon nanotubes (CNTs) is a promising candidate for PMS-based advanced oxidation processes (AOPs), and also a sustainable strategy to realize plastic management and reutilization. Herein, cost-effective PWs-derived N-doped CNTs (N-pCNTs) were synthesized, which displayed efficient activity for PMS activation through an electron transfer pathway (ETP) for sulfamethoxazole (SMX) degradation in high salinity water. The pyrrolic N induced the positively charged surface of N-pCNTs, favoring the electrostatic adsorption of PMS and subsequent generation of active PMS* . A galvanic oxidation process was developed to prove the electron-shuttle dominated ETP for SMX oxidation. Combined with theoretical calculations, the efficiency of ETP was determined by the potential difference between HOMO of SMX and LUMO of N-pCNTs. Such oxidation produced low-toxicity intermediates and resulted in selective degradation of specific sulfonamide antibiotics. This work reveals the feasibility of low-cost N-pCNTs catalysts from PWs serving as an appealing candidate for PMS-AOPs in water remediation, providing a new solution to alleviate environmental issues caused by PWs and also advances the understanding of ETP during PMS activation.

Highly efficient heterogeneous electro-Fenton reaction for tetracycline degradation by Fe-Ni LDH@ZIF-67 modified carbon cloth cathode: Mechanism and toxicity assessment

In this work, a novel and efficient Fe-Ni LDH@ZIF-67 catalyst modified carbon cloth (CC) cathode was developed for tetracycline (TC) degradation in heterogeneous electro-Fenton (Hetero-EF) process. Compared to Fe-Ni LDH/CC (75.7%), TC degradation rate of Fe-Ni LDH@ZIF-67/CC cathode increased to 95.6% within 60 min. The synergistic effect of hetero-EF and anodic oxidation process accelerated electron transfer, the maximum H2O2 production of Fe-Ni LDH@ZIF-67/CC electrode reached 264 mg/L, improving utilization efficiency of H2O2. The cathode possessing a satisfied TC degradation performance over a wide pH (3-9). Free radical capture experiment revealed the collaboration of ·O2-, ·OH, and 1O2 play a significant role in TC degradation. The 5 cycles experiment and metal ion leaching experiment showed that the proposed Fe-Ni LDH@ZIF-67/CC has good recyclability and stability. In addition, the proposed Fe-Ni LDH@ZIF-67/CC cathode achieved satisfying performance in real water (tap water: 97.3%, lake water: 97.7%), demonstrating the possibility for practical application. TC degradation pathways were proposed by theory analysis and experimental results. The toxicity of TC intermediates was reduced by Hetero-EF degradation according to Toxicity Estimation Software Tool and Escherichia coli growth inhibition experiments. This work provides a novel modified cathode to improve removal efficiency of antibiotics in wastewater.

Mechanism of interaction between ascorbic acid and soil iron-containing minerals for peroxydisulfate activation and organophosphorus flame retardant degradation

Soil constituents may play an important role in peroxydisulfate (PDS)-based oxidation of organic contaminants in soil. Iron-containing minerals (Fe-minerals) have been found to promote PDS activation for organics degradation. Our study found that ascorbic acid (H2A) could enhance PDS activation by soil Fe-minerals for triphenyl phosphate (TPHP) degradation. Determination and characterization analyses of Fe fractions showed that H2A could induce the reductive dissolution of solid Fe-minerals and the increasing of oxygen vacancies/hydroxyl groups content on Fe-minerals surface. The increasing of divalent Fe (Fe(II)) accelerated PDS activation to generate reactive oxygen species (ROS). Electron paramagnetic resonance (EPR) and quenching studies showed that sulfate radicals (SO4•-) and hydroxyl radicals (HO•) contributed significantly to TPHP degradation. The composition and content of Fe-minerals and soil organic matter (SOM) markedly influenced ROS transformations. Surface-bond and structural Fe played the main role in the production of Fe(II) in reaction system. The high-concentration SOM could result in ROS consumption and degradation inhibition. Density functional theory (DFT) studies revealed that H2A is preferentially adsorbed at α-Fe2O3(012) surface through Fe-O-C bridges rather than hydrogen bonds. After absorption, H atoms on H2A may further be migrated to adjacent O atoms on the α-Fe2O3(012) surface. With the transformation of H atoms to the α-Fe2O3(012) surface, the Fe-O-C bridge is broken and one electron is transferred from the O to Fe atom, inducing the reduction of trivalent Fe (Fe(III)) atom. MS/MS2 analysis, HPLC analysis, and toxicity assessment demonstrated that TPHP was transformed to less toxic 4-hydroxyphenyl diphenyl phosphate (OH-TPHP), diphenyl hydrogen phosphate (DPHP), and phenyl phosphate (PHP) through phenol-cleavage and hydroxylation processes, and even be mineralized in reaction system.

Insights into the potential applications of permanganate/peroxymonosulfate systems: enhancement via amorphous MnO2, effects of water matrices, and optimization using response surface methodology

In this study, we developed a novel self-catalytic oxidation system involving peroxymonosulfate (PMS) and permanganate (KMnO4), named as CUPP, to efficiently mineralize sulfamethoxazole (SMX) in groundwater. It was found that amorphous MnO2 derived from the in situ reduction of KMnO4 can directly adsorb HSO5-, a complex hydroxyl group, mediate the internal disproportionation reaction of HSO5- with the manganese complex, and effectively activate PMS, thereby promoting the oxidation of SMX and its degradation intermediates through sulfonate radiation. Furthermore, by using electron spin resonance (EPR), HPLC/MS full scan, and response surface methodology, the coexistence of HO˙, SO4-˙, O2-˙, 1O2, and active chlorine (Cl2, HOCl) in the CUPP system was confirmed. A total of 24 intermediate products were detected, and four possible degradation pathways were identified for SMX. In addition, it was found that the CUPP system has a strong impact resistance to pH variations, groundwater anions, and natural organic matter stress. Undoubtedly, the CUPP system presents an innovative approach for the degradation of various emerging organic pollutants in groundwater.

Enhanced persulfate activation by ethylene glycol-mediated bimetallic sulfide for imidacloprid degradation

CuFeS2 is regarded as a promising catalyst for heterogeneous activation to remove organic contaminants in wastewater. However, effects of solvents in regulating material synthesis and catalytic activity are still not clear. Herein, we reported the role of water, ethanol, ethylene glycol (EG), glycerol, and polyethylene glycol 200 on the synthesis of CuFeS2 micro-flowers and their performance in activating persulfate (PS) to remove imidacloprid (IMI) pesticide. The results showed that the solvent had an effect on the morphology, crystallinity, yields, specific surface areas and unpaired electrons of CuFeS2 micro-flowers. The degradation experiments revealed the efficient catalytic activity of EG-mediated CuFeS2 for heterogeneous PS activation. SO4•- and •OH were identified in EG-CuFeS2/PS system and •OH (90.4%) was the dominant reactive species. Meanwhile, stable 20% of η[PMSO2] (the molar ratio of PMSO2 generation to PMSO consumption) was achieved and demonstrated that Fe(IV) was also involved in the degradation process. Moreover, S2- promoted the cycling of Fe3+/Fe2+ and Cu2+/Cu+, enhancing the synergistic activation and reusability of the catalyst. Density functional theory (DFT) calculations verified that PS was adsorbed by Fe atom and electron transfer occurred on the catalyst surface. Three possible degradation pathways of IMI were proposed by analysis of the degradation intermediates and their toxicities were evaluated by ECOSAR. This study not only provides a theoretical foundation for catalyst design, but also promotes the industrial application of bimetallic sulfide Fenton-like catalysts for water management.

A Novel Z-Scheme Heterostructured Bi2 S3 /Cu-TCPP Nanocomposite with Synergistically Enhanced Therapeutics against Bacterial Biofilm Infections in Periodontitis

Porphyrin-based antibacterial photodynamic therapy (aPDT) has found widespread applications in treating periodontitis. However, its clinical use is limited by poor energy absorption, resulting in limited reactive oxygen species (ROS) generation. To overcome this challenge, a novel Z-scheme heterostructured nanocomposite of Bi2 S3 /Cu-TCPP is developed. This nanocomposite exhibits highly efficient light absorption and effective electron-hole separation, thanks to the presence of heterostructures. The enhanced photocatalytic properties of the nanocomposite facilitate effective biofilm removal. Theoretical calculations confirm that the interface of the Bi2 S3 /Cu-TCPP nanocomposite readily adsorbs oxygen molecules and hydroxyl radicals, thereby improving ROS production rates. Additionally, the photothermal treatment (PTT) using Bi2 S3 nanoparticles promotes the release of Cu2+ ions, enhancing the chemodynamic therapy (CDT) effect and facilitating the eradication of dense biofilms. Furthermore, the released Cu2+ ions deplete glutathione in bacterial cells, weakening their antioxidant defense mechanisms. The synergistic effect of aPDT/PTT/CDT demonstrates potent antibacterial activity against periodontal pathogens, particularly in animal models of periodontitis, resulting in significant therapeutic effects, including inflammation alleviation and bone preservation. Therefore, this design of semiconductor-sensitized energy transfer represents an important advancement in improving aPDT efficacy and the treatment of periodontal inflammation.

Visible-light-driven peroxymonosulfate activation by robust TiO2-base nanoparticles for efficient removal of sulfamethoxazole

In this study, a novel bimetallic Co-Mo-TiO2 nanomaterial was fabricated through a simple two-step method, and applied as photocatalyst to activate peroxymonosulfate (PMS) with high efficiency for sulfamethoxazole (SMX) removal under visible light. Nearly 100% of SMX was degraded within 30 min in Vis/Co-Mo-TiO2/PMS system, and its kinetic reaction rate constant (0.099 min-1) was 24.8 times higher compare with the Vis/TiO2/PMS system (0.014 min-1). Moreover, the quenching experiments and the electronic spin resonance analysis results confirmed that both 1O2 and SO4•- were the dominant active species in the optimal system, and the redox cycles of Co3+/Co2+ and Mo6+/Mo4+ promoted the generation of the radicals during the PMS activation process. Additionally, the Vis/Co-Mo-TiO2/PMS system exhibited a wide working pH range, superior catalytic performance toward different pollutants and excellent stability with 92.8% SMX removal capacity retention after three consecutive cycles. The result of density functional theory (DFT) suggested that Co-Mo-TiO2 exhibited a high affinity for PMS adsorption, as indicated by the length O-O bond from PMS and the Eads of the catalysts. Finally, the possible degradation pathway of SMX in optimal system was proposed through intermediate identification and DFT calculation, and a toxicity assessment of the by-products was also conducted.

Selective activation of peroxymonosulfate to singlet oxygen by engineering oxygen vacancy defects in Ti3CNTx MXene for effective removal of micropollutants in water

Defect engineering is an effective strategy to boost the catalytic activity of MXene towards heterogeneous peroxymonosulfate (PMS) activation for water decontamination. Herein, we developed a facile approach to fine-tune the generation of oxygen vacancies (OVs) on Ti3CNTx crystals by Ce-doping (Ce-Ti3CNTx) with the aim of mediating PMS activation for the degradation of micropollutants in water. By varying the dopant content, the OV concentrations of Ti3CNTx could be varied to enable the activation of PMS to almost 100% singlet oxygen (1O2), and hence the effective degradation of sulfamethoxazole (SMX, a model micropollutant). Various advanced characterization techniques were employed to obtain detailed information on the microstructure, morphology, and defect states of the catalysts. The experimental results showed that SMX removal was proportional to the OVs level. Density functional theory (DFT) models demonstrated that, in contrast to pristine Ti3CNTx, the OVs on 10%Ce-Ti3CNTx could adsorb the terminal O of PMS, which facilitated the formation of SO5 •- as well as the generation of 1O2. We further loaded the optimized catalysts onto a polytetrafluoroethylene microfiltration membrane and also demonstrated the efficient removal of SMX from water using a convection-enhanced mass transport flow-through configuration. This study provides new insights into the effective removal of micropollutants from water by integrating state-of-the-art defect engineering, advanced oxidation, and microfiltration techniques.

Design of amphoteric MOFs-cellulose based composite for wastewater remediation: Adsorption and catalysis

Water pollution remains a serious problem for aquatic organism and human beings. Developing an efficient material which can simultaneously remove and convert pollutants into low or no harmful compounds is an essential issue. Targeting at this goal, a multifunctional and amphoteric wastewater treatment material of Co-MOF and functionalized cellulose-based composite (CMC/SA/PEI/ZIF-67) was designed and prepared. Carboxymethyl cellulose (CMC) and sodium alginate (SA) were selected as support to construct an interpenetrating network structure and made it crosslinked with polyethyleneimine (PEI) for further in situ growth of ZIF-67 with good dispersion. The material was characterized using an appropriate set of spectroscopic and analytical techniques. When applied in the adsorption of heavy metal oxyanions with no adjustment of pH, the adsorbent could completely decontaminate Cr(VI) at both low and high initial concentrations with good reduction rates. The adsorbent maintained good reusability after five cycles. Meanwhile, the cobalt species of CMC/SA/PEI/ZIF-67 can activate peroxymonosulfate to generate high oxidizing substances (such as SO4-· and ·OH- radicals) to degrade cationic rhodamine B dye within 120 min, thus indicating the amphoteric and catalytic nature of our CMC/SA/PEI/ZIF-67 adsorbent. The mechanism of the adsorption and catalytic process was also discussed based with the assistance of different characterization analysis.

Electrochemical CNT filter functionalized with metal-organic framework for one-step antimonite decontamination

Currently, there is a lack of advanced nanotechnology designed to efficiently remove antimony (Sb) from contaminated water systems. Sb most commonly appears as antimonite (Sb(III)) or as the anion antimonate (Sb(V)). Sb(III) is approximately ten times more toxic than Sb(V), and Sb(III) is also harder to eliminate because of its motility and charge neutrality. The work presented here developed an electrochemical filtration technology for the direct elimination of Sb(III) from contaminated water. The primary components of the filtration system are an electroactive carbon nanotube (CNT) membrane that are functionalized with the Sb-specific UiO-66(Zr), an organometallic framework. In an electric field, the UiO-66(Zr)/CNT nanohybrid filter enabled in situ transformation of Sb(III) to less harmful Sb(V). The Sb(V) was then effectively adsorbed by the UiO-66(Zr). The removal efficiency (90.5%) and rate constant (k₁ = 0.0272 min^-1) toward Sb(III) removal was 1.3 and 1.4 times greater than that of CNT filter. The filter's abundance of available adsorption sites, flow-through construction, and electrochemical activity combined to rapidly remove Sb(III) from water. The underlying functioning of the nanohybrid filter was determined with a series of process experiments and structural characterizations. The filter was effective over a broad range of pH values and in a variety of complex aqueous environments. Once loaded with Sb, the UiO-66(Zr)/CNT filter could be washed with a dilute NaOH solution to efficiently refresh its activity. The results of this work offer a direct, efficient strategy that integrates nanotechnology, electrochemistry, and membrane separation to remove antimony and potentially other heavy metals from contaminated water.

Ferrate(VI)/Periodate System: Synergistic and Rapid Oxidation of Micropollutants via Periodate/Iodate-Modulated Fe(IV)/Fe(V) Intermediates

The presence of organic micropollutants in water sources worldwide has created a need for the development of effective and selective oxidation methods in complex water matrices. This study is the first report of the combination of ferrate(VI) (Fe(VI)) and periodate (PI) for synergistic, rapid, and selective elimination of multiple micropollutants. This combined system was found to outperform other Fe(VI)/oxidant systems (e.g., H₂O₂, peroxydisulfate, and peroxymonosulfate) in rapid water decontamination. Scavenging, probing, and electron spin resonance experiments showed that high-valent Fe(IV)/Fe(V) intermediates, rather than hydroxyl radicals, superoxide radicals, singlet oxygen, and iodyl radicals, played a dominant role in the process. Further, the generation of Fe(IV)/Fe(V) was evidenced directly by the ⁵⁷Fe Mössbauer spectroscopic test. Surprisingly, the reactivity of PI toward Fe(VI) is rather low (0.8223 M^-1 s^-1) at pH 8.0, implying that PI was not acting as an activator. Besides, as the only iodine sink of PI, iodate also played an enhanced role in micropollutant abatement by Fe(VI) oxidation. Further experiments proved that PI and/or iodate might function as the Fe(IV)/Fe(V) ligands, causing the utilization efficiency of Fe(IV)/Fe(V) intermediates for pollutant oxidation to outcompete their auto-decomposition. Finally, the oxidized products and plausible transformation pathways of three different micropollutants by single Fe(VI) and Fe(VI)/PI oxidation were characterized and elucidated. Overall, this study proposed a novel selective oxidation strategy (i.e., Fe(VI)/PI system) that could efficiently eliminate water micropollutants and clarified the unexpected interactions between PI/iodate and Fe(VI) for accelerated oxidation.

Non-radical degradation of organic pharmaceuticals by g-C3N4 under visible light irradiation: The overlooked role of excitonic energy transfer

In this work, an excitonic energy transfer (EET) based non-radical mechanism was proposed for the degradation of organic pharmaceuticals by graphitic carbon nitride (g-C₃N₄) under visible light irradiation. Using diclofenac (DCF) as a model molecule, the competition between single electron transfer (SET) and EET was studied through modulating the exciton binding energy of g-C₃N₄. The different mechanisms of SET and EET for DCF degradation were predicted by DFT calculation, and further confirmed by their different degradation pathways. When EET played an important role, the rationality of some very popular radical scavengers, such as p-BQ, TEMPOL and furfuryl alcohol must be reconsidered. In addition, humic acid (HA) had a distinct effect on EET and SET. Specifically, HA enhanced the EET process through photosensitization, but suppressed SET through radical quenching effect. The effect of HA on DCF degradation depended on the contribution ratio of SET and ET.

Abiotic transformations of sulfamethoxazole by hydroxylamine, nitrite and nitric oxide during wastewater treatment: Kinetics, mechanisms and pH effects

Hydroxylamine (NH₂OH), nitrite (NO₂^-) and nitric oxide (NO), intermediates enzymatically formed during biological nitrogen removal processes, can engage in chemical (abiotic) transformations of antibiotics. This study determined the kinetics, mechanisms and pathways of abiotic transformations of the antibiotic sulfamethoxazole (SMX) by NH₂OH, NO₂^- and NO in a series of batch tests under different pH and oxygen conditions. While NH₂OH was not able to directly transform SMX, NO₂^- (with HNO₂ as the actual reactant) and NO can chemically transform SMX primarily through hydroxylation, nitration, deamination, nitrosation, cleavage of S-N, N-C and C-S bonds, and coupling reactions. There were substantial overlaps in transformation product formations during abiotic transformations by HNO₂^- and NO. The second order rate constants of SMX with NO₂^- and NO were determined in the range of 1.5 × 10^-1 - 4.8 × 10³ M^-1 s^-1 and 1.0 × 10² - 3.1 × 10⁴ M^-1 s^-1, respectively, under varying pH (4 - 9) and anoxic or oxic conditions. Acidic pH significantly enhanced abiotic transformation kinetics, and facilitated nitration, nitrosation, and cleavage of S-N and N-C bonds. The findings advance our understanding of the fate of antibiotics during biological nitrogen removal, and highlight the role of enzymatically formed reactive nitrogen species in the antibiotic degradation.

Construction of Ag nanocluster-modified Ag3PO4 containing silver vacancies via in-situ reduction: With enhancing the photocatalytic degradation activity of sulfamethoxazole

Photocatalytic removal of sulfonamide antibiotics is an effective strategy to solve environmental pollution. Ag3PO4 is a promising anode material for photocatalytic material with photocatalytic degradation ability under ultraviolet light or natural light. Unfortunately, due to its instability, Ag+ could be reduced to Ag0 which loaded onto the surface of Ag3PO4 during the photocatalytic process, causing self-photocorrosion and resulting in the reduction of photocatalytic activity and stability. Herein, Ag3PO4 nanoparticles loaded with Ag nanoclusters containing Ag vacancies (Ag/Ag3PO4-VAg) were constructed by an in-situ reduction strategy to achieve effectively photocatalytic degradation behavior. The Ag nanoclusters loaded on the surface of Ag3PO4 can not only effectively inhibit the self-photocorrosion but also affords a localized surface plasmon resonance (LSPR) effect in the photocatalytic process, thus leading to the efficient generation and rapid transfer of photogenerated carriers behavior. In addition, the Ag vacancies in Ag3PO4 are crucial to increasing the adsorption energy of H2O for further enhancing the capture and accumulation of electrons. In detail, according to Zeta potential analysis, the strong adsorption sites of sulfamethoxazole (SMX) molecules are generated at the interface of Ag and Ag3PO4, which promote the activation of SMX molecules. A 100 ml of 20 mg/L SMX could be completely degraded within 15 min with an apparent rate constant (Kapp) of 0.306 min-1, which far exceeds the activity of most of the photocatalysts. This work may provide an attractive strategy to address the activity, stability of Ag3PO4 and and realizing the green remediation of SMX wastewater.

Pauling-type adsorption of O2 induced electrocatalytic singlet oxygen production on N-CuO for organic pollutants degradation

Due to environmentally friendly operation and on-site productivity, electrocatalytic singlet oxygen (¹O₂) production via O₂ gas is of immense interest in environment purification. However, the side-on configuration of O₂ on the catalysts surface will lead to the formation of H₂O, which seriously limits the selectivity and activity of ¹O₂ production. Herein, we show a robust N-doped CuO (N–CuO) with Pauling-type (end-on) adsorption of O₂ at the N–Cu–O₃ sites for the selective generation of ¹O₂ under direct-current electric field. We propose that Pauling-type configuration of O₂ not only lowers the overall activation energy barrier, but also alters the reaction pathway to form ¹O₂ instead of H₂O, which is the key feature determining selectivity for the dissociation of Cu–O bonds rather than the O–O bonds. The proposed N dopant strategy is applicable to a series of transition metal oxides, providing a universal electrocatalysts design scheme for existing high-performance electrocatalytic ¹O₂ production.

Side-on configuration of O₂ on the catalysts conventionally leads to reduction of O₂ to water. Here, the authors propose a nitrogen doping strategy with Pauling-type adsorption of O₂ for selective electrocatalytic singlet oxygen production.

A novel pathway of atmospheric sulfate formation through carbonate radicals

Abstract. Carbon dioxide is considered an inert gas that rarely participates in atmospheric chemical reactions. Nonetheless, we show here that CO2 is involved in some important photo-oxidation reactions in the atmosphere through the formation of carbonate radicals (CO3⚫-). This potentially active intermediate CO3⚫- is routinely overlooked in atmospheric chemistry concerning its effect on sulfate formation. The present work demonstrates that the SO2 uptake coefficient is enhanced by 17 times on mineral dust particles driven by CO3⚫-. Importantly, upon irradiation, mineral dust particles are speculated to produce gas-phase carbonate radical ions when the atmospherically relevant concentration of CO2 presents, thereby potentially promoting external sulfate aerosol formation and oxidative potential in the atmosphere. Employing a suite of laboratory investigations of sulfate formation in the presence of carbonate radicals on the model and authentic dust particles, ground-based field measurements of sulfate and (bi)carbonate ions within ambient PM, together with density functional theory (DFT) calculations for single electron transfer processes in terms of CO3⚫--initiated S(IV) oxidation, a novel role of carbonate radical in atmospheric chemistry is elucidated.

Peracetic acid integrated catalytic ceramic membrane filtration for enhanced membrane fouling control: Performance evaluation and mechanism analysis

Endowing ceramic membrane (CM) catalytic reactivity can enhance membrane fouling control in the aid of in situ oxidation process. Peracetic acid (PAA) oxidant holds great prospect to integrate with CM for membrane fouling control, owing to the prominent advantages of high oxidation efficacy and easy activation. Herein, this study, for the first time, presented a PAA/CM catalytic filtration system achieving highly-efficient protein fouling alleviation. A FeOCl functionalized CM (FeOCl-CM) was synthesized, possessing high hydrophilicity, low surface roughness, and highly-efficient activation towards PAA oxidation. Using bovine serum albumin (BSA) as the model protein foulant, the PAA/FeOCl-CM catalytic filtration notably alleviated fouling occurring in both membrane pores and surface, and halved the flux reduction degree as compared with the conventional CM filtration. The PAA/FeOCl-CM catalytic oxidation allows quick and complete disintegration of BSA particles, via the breakage of the amide I and II bands and the ring opening of the aromatic amino acids (e.g., Tryptophan, Tyrosine). In-depth investigation revealed that the in situ generated ^•OH and ¹O₂ were the key reactive species towards BSA degradation during catalytic filtration, while the organic radical oxidation and the direct electron transfer pathway from BSA to PAA via FeOCl-CM played minor roles. Overall, our findings highlight a new PAA/CM catalytic filtration strategy for achieving highly-efficient membrane fouling control and provide an understanding of the integrated PAA catalytic oxidation - membrane filtration behaviors.

Enhanced ferrate oxidation of organic pollutants in the presence of Cu(II) Ion

In this study, we found that the introduction of Cu(II) (several μM, close to the concentration level of some real water/wastewater) in ferrate (Fe(VI)) oxidation can remarkably accelerate the abatement of various organic pollutants under slightly alkaline conditions. The results show that 5 μM sulfamethoxazole (SMX) can be completely degraded by Fe(VI) (50 μM) in the presence of 20 μM Cu(II) within 10 min at pH 8.0, which was 1.65 times higher than that by Fe(VI) alone. High-valent iron intermediates (i.e. Fe(V), Fe(IV)) and Cu(III) were generated as reactive species in the Cu(II)/Fe(VI) system, all of which contributed to the enhanced oxidation of SMX. Common water components, except for HCO₃^- and humic acid, exhibited no influence on SMX removal. Additionally, the enhanced removal of SMX by Cu(II)/Fe(VI) was also observed in real water with the benefit of total removal of Cu(II) by the ferrate resultant particles. Due to the presence of highly reactive and selective oxidant, the Cu(II)/Fe(VI) system could react readily with organic pollutants containing electron-rich moieties, such as phenol, olefin or amino groups. This study provided a simple, selective, and practical strategy for the abatement of organic pollutants and a simultaneous removal of Cu(II).

In-situ catalytic degradation of sulfamethoxazole with efficient CuCo-O@CNTs/NF cathode in a neutral electro-Fenton-like system

In this paper, a CuCo-O@CNTs/NF electrode was successfully prepared and used for in-situ degradation of sulfamethoxazole (SMX) in an electro-Fenton-like system. Carbon nanotubes (CNTs) and coral-like copper-cobalt oxides were successively loaded on nickel foam (NF). CNTs contributed to improving the dispersibility and stability of copper-cobalt oxides, and the coral-like copper-cobalt oxide catalyst was anchored on CNTs without any adhesive. In the electro-Fenton-like system, dissolved oxygen can be reduced to superoxide anions in a one-electron step, which could be further transformed into hydrogen peroxide and then reacted with the active components on the electrode to generate reactive oxygen species (ROS) to participate in the degradation of SMX. Almost 100% SMX removal was obtained within 60 min in a wide near-neutral pH range (5.6-9.0), and the electrode could still achieve a 90.4% removal rate after ten recycle runs. Radical-quenching results showed that superoxide anions were the main species in the degradation of SMX. In addition, a possible degradation pathway of SMX was proposed. According to the result of toxicological simulations, the toxicity of the pollutant solution during the degradation process exhibited a decreasing trend. This study provides new insights for in-situ catalysis of electrodes with bimetallic active components to generate ROS for high-efficiency degradation of refractory organic pollutants.

Hydroxylamine promoted hydroxyl radical production and organic contaminants degradation in oxygenation of pyrite

The heterogeneous Fenton-like process using pyrite (FeS₂) is increasingly recognized as a promising advanced oxidation process for removal of organic contaminants. However, the slow regeneration of Fe(II) limits the generation of reactive oxygen species for environment implication. To overcome this drawback, hydroxylamine was applied to enhance the reactivity of FeS₂ to degrade organic contaminants under oxic conditions. Results showed that hydroxylamine facilitated the regeneration of Fe(II) on FeS₂ surface to promote reactive oxygen species generation, thereby efficiently degrading different organic contaminants. The underlying mechanism was further elucidated that the presence of hydroxylamine enhanced electron transfer from FeS₂ to O₂ to produce superoxide radicals (O₂^•-), hydrogen peroxide (H₂O₂) and hydroxyl radical (HO^•) via Fenton-like pathways, which induced the rapid degradation of organic contaminants (e.g., sulfamethoxazole (SMX)). The reactivity of FeS₂ for organic contaminant degradation changed negligibly after seven cycles in the presence of hydroxylamine. The effects of pH and inorganic anions on SMX degradation were also clarified in details. The finding of this study would provide a novel strategy to enhance the contaminants degradation by FeS₂-based advanced oxidation technologies for environmental remediation.

Chemoenzymatic Cascade Reaction for Green Cleaning of Polyamide Nanofiltration Membrane

Chemical cleaning is indispensable for the sustainable operation of nanofiltration (NF) in wastewater treatment. However, the common chemical cleaning methods are plagued by low cleaning efficiency, high chemical consumption, and separation performance deterioration. In this work, a chemoenzymatic cascade reaction is proposed for pollutant degradation and polyamide NF membrane cleaning. Glucose oxidase (GOD) enzymatic reaction in this cascade system produces hydrogen peroxide (H₂O₂) and gluconic acid to trigger the oxidation of foulants by Fe₃O₄-catalyzed Fenton reaction. By virtue of the microenvironment (pH and H₂O₂ concentration) engineering and substrate enrichments, this chemoenzymatic cascade reaction (GOD-Fe₃O₄) exhibits a favorable degradation efficiency for bisphenol A and methyl blue (MB). Thanks to the strong oxidizing degradation, the water flux of the NF10 membrane fouled by MB is almost completely recovered (∼95.8%) after a 3-cycle fouling/cleaning experiment. Meanwhile, the chemoenzymatic cascade reaction improves the applicability of the Fenton reaction in polyamide NF membrane cleaning because it prevents the membrane from damaging by high concentration of H₂O₂ and inhibits the secondary fouling caused by ferric hydroxide precipitates. By immobilizing GOD on the aminated Fe₃O₄ nanoparticles, a reusable cleaning agent is prepared for highly efficient membrane cleaning. This chemoenzymatic cascade reaction without the addition of an acid/base/oxidant provides a promising candidate for sustainable and cost-effective cleaning for the polyamide NF membrane.

Efficient inactivation of intracellular bacteria in dormant amoeba spores by FeP

Waterborne pathogens and related diseases are a severe public health threat worldwide. Recent studies suggest that microbial interactions among infectious agents can significantly disrupt the disinfection processes, and current disinfection methods cannot inactivate intracellular pathogens effectively, posing an emerging threat to the safety of drinking water. This study developed a novel strategy, the FeP/persulfate (PS) system, to effectively inactivate intracellular bacteria within the amoeba spore. We found that the sulfate radical (SO₄^•-) produced by the FeP/PS system can be quickly converted into hydroxyl radicals (•OH), and •OH can penetrate the amoeba spores and inactivate the bacteria hidden inside amoeba spores. Therefore, this study proposes a novel technique to overcome the protective effects of microbial interactions and provides a new direction to inactivate intracellular pathogens efficiently.