Influence of natural organic matter and surface charge on the toxicity and bioaccumulation of functionalized ceria nanoparticles in Caenorhabditis elegans

Size, polyglycerol grafting, and net surface charge of iron oxide nanoparticles determine their interaction and toxicity in Caenorhabditis elegans

The widespread application of engineered nanoparticles (NPs) in environmental remediation has raised public concerns about their toxicity to aquatic organisms. Although appropriate surface modification can mitigate the ecotoxicity of NPs, the lack of polymer coating to inhibit toxicity completely and the insufficient knowledge about charge effect hinder the development of safe nanomaterials. Herein, we explored the potential of polyglycerol (PG) functionalization in alleviating the environmental risks of NPs. Iron oxide NPs (ION) of 20, 100, and 200 nm sizes (IONS, IONM and IONL, respectively) were grafted with PG to afford ION-PG. We examined the interaction of ION and ION-PG with Caenorhabditis elegans (C. elegans) and found that PG suppressed non-specific interaction of ION with C. elegans to reduce their accumulation and to inhibit their translocation. Particularly, IONS-PG was completely excluded from worms of all developmental stages. By covalently introducing sulfate, carboxyl and amino groups onto IONS-PG, we further demonstrated that positively charged IONS-PG-NH3+ induced high intestinal accumulation, cuticle adhesion and distal translocation, whereas the negatively charged IONS-PG-OSO3- and IONS-PG-COO- were excreted out. Consequently, no apparent deleterious effects on brood size and life span were observed in worms treated by IONS-PG and IONS-PG bearing negatively charged groups. This study presents new surface functionalization approaches for developing ecofriendly nanomaterials.

Effects of Mixtures of Engineered Nanoparticles and Cocontaminants on Anaerobic Digestion

The widespread application of nanotechnology inevitably leads to an increased release of engineered nanoparticles (ENPs) into the environment. Due to their specific physicochemical properties, ENPs may interact with other contaminants and exert combined effects on the microbial community and metabolism of anaerobic digestion (AD), an important process for organic waste reduction, stabilization, and bioenergy recovery. However, the complicated interactions between ENPs and other contaminants as well as their combined effects on AD are often overlooked. This review therefore focuses on the co-occurrence of ENPs and cocontaminants in the AD process. The key interactions between ENPs and cocontaminants and their combined influences on AD are summarized from the available literature, including the critical mechanisms and influencing factors. Some sulfides, coagulants, and chelating agents have a dramatic "detoxification" effect on the inhibition effect of ENPs on AD. However, some antibiotics and surfactants increase the inhibition of ENPs on AD. The reasons for these differences may be related to the interactive effects between ENPs and cocontaminants, changes of key enzyme activities, adenosine triphosphate (ATP) levels, reactive oxygen species (ROS) production, and microbial communities. New scientific opportunities for a better understanding of the coexistence in real world situations are converging on the scale of nanoparticles.

Cerium oxide nanoparticles (nCeO2) exert minimal adverse effects on microbial communities in soils with and without biosolids amendment

Increased use of nano-cerium oxide (nCeO₂) in an array of industrial applications has raised environmental concerns due to potential increased loadings to the soil environment. This research investigated the potential adverse effects of nCeO₂ (10-30 nm) on the soil microbial community in two exposure scenarios: direct application to soil, and indirect application to soil through chemical spiking of biosolids, followed by mixing into soil. Total Ce in test soils without, and with biosolids amendment, ranged from 44 to 770, and 73 to 664 mg Ce kg^-1 soil, respectively. In order to help distinguish whether observed effects were elicited by the solid-phase colloids or the activity of dissolved Ce, a soluble Ce salt (Ce (NO₃)₃) treatment was included in select assays. A suite of tests was used to investigate effects on critical processes: microbial growth (heterotrophic plate count), microbial activity (organic matter (OM) decomposition, enzyme activity and, nitrification) and diversity (structural and functional). Although results showed significant inhibition on microbial growth in soil without biosolids amendment at ≥ 156 mg Ce kg^-1 soil by week 5, these results were inconsistent and non-significant thereafter. In general, nCeO₂ showed no evidence of consistent adverse effects on OM decomposition, nitrification, soil enzyme activities and functional diversity. Leucine aminopeptidase showed significant (p< 0.05) stimulatory effects over time at ≥ 44 mg Ce kg^-1 in soils without biosolids, which was not observed in soils with biosolids amendment. The lack of inhibitory effects of nCeO₂ may be attributed to its low solubility; Ce in soil extracts (0.01 M CaCl₂) were all below detection (< 0.003 mg kg^-1) in the nCeO₂-spiked soils, but detectable in the Ce (NO₃)₃ samples. In contrast, soluble Ce at 359 mg Ce kg^-1 showed a significant reduction in OM decomposition and effects on microbial genomic diversity based on the 16S rDNA data in soils with and without biosolids amendment (359 and 690 mg Ce kg^-1). The nCeO₂ behaviour and effects information described herein are expected to help fulfill data gaps for the characterization of this priority nanomaterial.

Impact on Some Soil Physical and Chemical Properties Caused by Metal and Metallic Oxide Engineered Nanoparticles: A Review

In recent years, the release of metal and metallic oxide engineered nanoparticles (ENPs) into the environment has generated an increase in their accumulation in agricultural soils, which is a serious risk to the ecosystem and soil health. Here, we show the impact of ENPs on the physical and chemical properties of soils. A literature search was performed in the Scopus database using the keywords ENPs, plus soil physical properties or soil chemical properties, and elements availability. In general, we found that the presence of metal and metallic oxide ENPs in soils can increase hydraulic conductivity and soil porosity and reduce the distance between soil particles, as well as causing a variation in pH, cation exchange capacity (CEC), electrical conductivity (EC), redox potential (Eh), and soil organic matter (SOM) content. Furthermore, ENPs or the metal cations released from them in soils can interact with nutrients like phosphorus (P) forming complexes or precipitates, decreasing their bioavailability in the soil solution. The results depend on the soil properties and the doses, exposure duration, concentrations, and type of ENPs. Therefore, we suggest that particular attention should be paid to every kind of metal and metallic oxide ENPs deposited into the soil.

Toxicity of ceria nanoparticles to the regeneration of freshwater planarian Dugesia japonica: The role of biotransformation

Cerium oxide nanoparticles (n-CeO₂) have wide applications ranging from industrial to consumer products, which would inevitably lead to their release into the environment. Despite the toxicity of n-CeO₂ on aquatic organisms has been largely reported, research on developing organisms is still lacking. In this study, we investigate the toxic effects of n-CeO₂ on the stem cells, tissue- and neuro-regeneration, using freshwater planarian Dugesia japonica as a model. Effects of bulk sized (μ-) CeO₂ and ionic Ce (Ce³⁺) were compared with that of n-CeO₂ to explore the origin of the toxic effects of n-CeO₂. No overt toxicity was observed in μ-CeO₂ treatment. n-CeO₂ not only impaired the homeostasis of normal planarians, but also inhibited the regeneration processes of regenerated planarians, demonstrated by the inhibited blastema growth, disturbed antioxidant defense system at molecular levels, elevated DNA-damage and decreased stem cell proliferation. Regenerating organisms are more susceptible to n-CeO₂ than the normal ones. Ce³⁺ exhibited significantly higher toxicity than n-CeO₂, even though the total Ce uptake is 0.2 % less in Ce³⁺ than in n-CeO₂ treated in planarian. X-ray absorption near edge spectroscopy (XANES) analysis revealed that 12.8 % of n-CeO₂ (5.95 mg/kg Ce per planarian) was transformed to Ce³⁺ after interaction with planarian, suggesting that biotransformation at the nano-bio interface might play an important role in the observed toxicity. Since the biotransformation of n-CeO₂ is a slow process, it may cause long-term chronic toxicity to planarians due to the slow while sustained release of toxic Ce³⁺ ions.

Bacterial Metabolites and Particle Size Determine Cerium Oxide Nanomaterial Biotransformation

Soil is a major receptor of manufactured nanomaterials (NMs) following unintentional releases or intentional uses. Ceria NMs have been shown to undergo biotransformation in plant and soil organisms with a partial Ce(IV) reduction into Ce(III), but the influence of environmentally widespread soil bacteria is poorly understood. We used high-energy resolution fluorescence-detected X-ray absorption spectroscopy (HERFD-XAS) with an unprecedented detection limit to assess Ce speciation in a model soil bacterium (Pseudomonas brassicacearum) exposed to CeO₂ NMs of different sizes and shapes. The findings revealed that the CeO₂ NM's size drives the biotransformation process. No biotransformation was observed for the 31 nm CeO₂ NMs, contrary to 7 and 4 nm CeO₂ NMs, with a Ce reduction of 64 ± 14% and 70 ± 15%, respectively. This major reduction appeared quickly, from the early exponential bacterial growth phase. Environmentally relevant organic acid metabolites secreted by Pseudomonas, especially in the rhizosphere, were investigated. The 2-keto-gluconic and citric acid metabolites alone were able to induce a significant reduction in 4 nm CeO₂ NMs. The high biotransformation measured for <7 nm NMs would affect the fate of Ce in the soil and biota.

A critical review on the role of abiotic factors on the transformation, environmental identity and toxicity of engineered nanomaterials in aquatic environment

Engineered nanomaterials (ENMs) are at the forefront of many technological breakthroughs in science and engineering. The extensive use of ENMs in several consumer products has resulted in their release to the aquatic environment. ENMs entering the aquatic ecosystem undergo a dynamic transformation as they interact with organic and inorganic constituents present in aquatic environment, specifically abiotic factors such as NOM and clay minerals, and attain an environmental identity. Thus, a greater understanding of ENM-abiotic factors interactions is required for an improved risk assessment and sustainable management of ENMs contamination in the aquatic environment. This review integrates fundamental aspects of ENMs transformation in aquatic environment as impacted by abiotic factors, and delineates the recent advances in bioavailability and ecotoxicity of ENMs in relation to risk assessment for ENMs-contaminated aquatic ecosystem. It specifically discusses the mechanism of transformation of different ENMs (metals, metal oxides and carbon based nanomaterials) following their interaction with the two most common abiotic factors NOM and clay minerals present within the aquatic ecosystem. The review critically discusses the impact of these mechanisms on the altered ecotoxicity of ENMs including the impact of such transformation at the genomic level. Finally, it identifies the gaps in our current understanding of the role of abiotic factors on the transformation of ENMs and paves the way for the future research areas.

Exposure of humic acid-coated goethite colloids to groundwater does not affect their adsorption of metal(loid)s and their impact on Daphnid mobility

Engineered humic acid-coated goethite (HA-Goe) colloids find increasing application in in situ remediation of metal(loid)-polluted groundwater. Once introduced into the subsurface, the colloids interact with groundwater altering their physicochemical properties. In comparison to freshly synthesized, unreacted HA-Goe colloids, such alterations could reduce the adsorption affinity towards metal(loid)s and also result in altered ecotoxicological effects. In our study, HA-Goe colloids were exposed to two groundwaters (low vs. high concentrations of metal(loid)s) from two metal(loid)-contaminated sites for 87 days. We investigated (i) the course of HA-Goe ecotoxicity (Daphnia magna immobilization tests), (ii) HA-Goe adsorption properties (multi-element solutions containing As, Cu, Zn, Ni and Co), and (iii) changes in the chemical composition as well as in the mineral and aggregate properties of HA-Goe. The adsorption affinity of HA-Goe decreased in the order As ≈ Cu ≫ Zn > Ni ≈ Co. The metal(loid) adsorption occurred rapidly after mixing prior to the first sampling, while the duration of ongoing exposition to groundwater had no effect on the adsorption of these metal(loid)s. We neither observed a desorption of humic acids from the goethite surface nor alterations in the mineralogy, crystallinity, and surface properties of HA-Goe. Standardized Daphnia magna immobilization tests showed an increased number of mobile organisms with increasing exposure time of HA-Goe to both groundwaters. The decrease in HA-Goe-mediated immobilization of D. magna was strongest within the first 30 d. We attribute this to a shift to smaller sizes due to the breakdown of large HA-Goe aggregates, particularly within the first 30 d. The breakdown of these μm-sized aggregates may result mainly from the repeated shaking of the HA-Goe suspensions. Our study confirms within this particular setting that the tested HA-Goe colloids are suitable for the long-term immobilization of metal(loid)s, while lethal effects on D. magna were negligible.

Coating with polysaccharides influences the surface charge of cerium oxide nanoparticles and their effects to Mytilus galloprovincialis

This study focused on the effects of surface coating, acquired through the interaction with natural biomolecules, on the behavior and ecotoxicity of nanoparticles (NPs). To this aim, the effects of Cerium Oxide Nanoparticles (CeO₂NPs) naked and coated with chitosan and alginate on the marine mussel Mytilus galloprovincialis were compared. Mussels were exposed for 7 days to 100 μg L^-1 of CeO₂NPs and for 28 days to 1 μg L^-1 of CeO₂NPs. In both experiments CeO₂NPs were used naked and coated with the two polysaccharides. The lowest tested concentration allowed to understand the environmental relevance of this biological process. A set of biomarkers related to oxidative stress/damage and energy metabolism was applied to assess the ecotoxicity of CeO₂NPs. The aggregation and stability in water of CeO₂NPs were measured through dynamic light scattering analysis and the levels of Ce in the exposure media and in mussels soft tissues were determined by inductively coupled plasma-mass spectrometry. Results showed a different hydrodynamic behavior and stability of CeO₂NPs in saltwater related to the different coatings. Despite this, no differences in the bioaccumulation of CeO₂NPs were observed among the experimental groups. Different coatings affected also CeO₂NPs toxicological outcomes in both 7- and 28-days exposures. Coating with chitosan enhanced antioxidant enzyme activities while coating with alginate triggered oxidative damage. Although the oxidant pathways did not differ that much among the exposures, biomarkers of energetic supplies suggested a different strategy of defense in response to CeO₂NP exposure at a lower concentration and for a longer period of time. The obtained results are in line with findings of a previous study on freshwater mussels, suggesting that the coating with biomolecules, which impart negative charge to the NPs, might enhance their biological effects. This study highlighted that interactions of NPs with natural biomolecules largely present in the aquatic environment could affect NPs toxicity altering the interaction towards organisms.

Cytotoxicity of functionalized CeO2 nanoparticles towards Escherichia coli and adaptive response of membrane properties

The cytotoxicity and mechanisms of cerium oxide nanoparticles (CeO₂-NPs) on organisms have attracted great concerns recently, while that of CeO₂-NPs with functional groups remains unclear. This study investigated cytotoxic effects and mechanisms of CeO₂-NPs with hydroxyl, carboxyl, or amino functional groups towards a strain Escherichia coli (E. Coli). Results showed that CeO₂-NPs produced a stronger cytotoxicity in NaCl medium than in PBS medium at the concentrations of 10-400 mg/L. The toxicity followed the order of CeO₂-COOH > CeO₂-NH₂ > CeO₂-OH. Exposing to CeO₂-NPs increased cell membrane permeability and reduced membrane fluidity. The membrane phospholipid fatty acid compositions also varied greatly as a response to the stress of CeO₂-NPs, with the proportion of unsaturated fatty acids increased and saturated fatty acids decreased. Both intracellular reactive oxygen species (ROS) level and malonaldehyde (MDA) level declined, suggesting the oxidative stress from ROS may be not the primary reason for the membrane damage. Other mechanisms such as direct membrane oxidation by Ce⁴⁺ or physical penetration based on a close contact between nanoparticles and microbes might contribute to the membrane damages and cell viability loss. The present study provides a significant insight into the influence of functionalized CeO₂-NPs on a gram-negative bacterium.

Delivery of short hairpin RNA in the neotropical brown stink bug, Euschistus heros, using a composite nanomaterial

The response of insects to orally delivered double-stranded RNA ranges widely among taxa studied to date. Long dsRNA does elicit a response in stink bugs but the dose required to achieve an effect is relatively high compared to other insects such Colorado potato beetle or western corn rootworm. Improving the delivery of dsRNA to stink bugs will improve the likelihood of using RNA-based biocontrols for the management of these economically important pests. Short hairpin RNA (shRNA) is a useful molecule with which to test improvements in the delivery of double stranded RNA in the neotropical brown stink bug, Euschistus heros, since shRNA alone does not elicit a clear effect like that for long dsRNA. Here, we show for the first time the oral delivery of shRNA triggering RNA interference (RNAi) in E. heros using 4 nm cerium oxide nanoparticles (CeO₂ NPs) coated with diethylamioethyl dextran (Dextran-DEAE) as a carrier. We identified particle properties (coating composition and degree of substitution, hydrodynamic diameter, and zeta potential) and shRNA loading rates (Ce:shRNA mass ratio) that resulted in successful transcript reduction or RNAi. When the Z-average diameter of CeO₂ Dextran-DEAE-shRNA NP complex was less than 250 nm and the zeta potential was in the 15-25 mV range (Ce:shRNA mass ratio of 0.7:1), significant mortality attributed to RNAi was observed with a shRNA concentration in feeding solution of 250 ng/μl. The degradation of the targeted troponin transcript by NP-delivered shRNA was equivalent to that observed with long dsRNA, while naked shRNA transcript reduction was not statistically significant. Elemental mapping by synchrotron X-ray fluorescence microprobe confirmed uptake and distribution of Ce throughout the body with the highest concentrations found in gut tissue. Taken together, our results suggest that a nanoparticle delivery system can improve the delivery of RNA-based biocontrols to E. heros, and therefore its attractiveness as an application in the management of this important pest in soybean production.

A Kinetic Approach for Assessing the Uptake of Ag from Pristine and Sulfidized Ag Nanomaterials to Plants

Nanomaterials (NMs) are thermodynamically unstable by nature, and exposure of soil organisms to NMs in the terrestrial environment cannot be assumed constant. Thus, steady-state conditions may not apply to NMs, and bioaccumulation modeling for uptake should follow a dynamic approach. The one-compartment model allows the uptake and elimination of a chemical to be determined, while also permitting changes in exposure and growth to be taken into account. The aim of the present study was to investigate the accumulation of Ag from different Ag NM types (20 nm Ag⁰ NMs, 50 nm Ag⁰ NMs, and 25 nm Ag₂ S NMs) in the crop plant wheat (Triticum aestivum). Seeds were emerged in contaminated soils (3 or 10 mg Ag/kg dry soil, nominal) and plants grown for up to 42 d postemergence. Plant roots and shoots were collected after 1, 7, 14, 21, and 42 d postemergence; and total Ag was measured. Soil porewater Ag concentrations were also measured at each sampling time. Using the plant growth rates in the different treatments and the changing porewater concentrations as parameters, the one-compartment model was used to estimate the uptake and elimination of Ag from the plant tissues. The best fit of the model to the data included growth rate and porewater concentration decline, while showing elimination of Ag to be close to zero. Uptake was highest for Ag⁰ NMs, and size did not influence their uptake rates. Accumulation of Ag from Ag₂ S NMs was lower, as reflected by the lower porewater concentrations. Environ Toxicol Chem 2021;40:1861-1872. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Alginate coating modifies the biological effects of cerium oxide nanoparticles to the freshwater bivalve Dreissena polymorpha

The adsorption of biomacromolecules is a fundamental process that can alter the behaviour and adverse effects of nanoparticles (NPs) in natural systems. While the interaction of NPs with natural molecules present in the environment has been described, their biological impacts are largely unknown. Therefore, this study aims to provide a first evidence of the influence of biomolecules sorption on the toxicity of cerium oxide nanoparticles (CeO₂NPs) towards the freshwater bivalve Dreissena polymorpha. To this aim, we compared naked CeO₂NPs and coated with alginate and chitosan, two polysaccharides abundant in aquatic environments. Mussels were exposed to the three CeO₂NPs (naked, chitosan- and alginate-coated) up to 14 days at 100 μg L^-1, which is a concentration higher than the environmental one predicted for this type of NP. A suite of biomarkers related to oxidative stress and energy metabolism was applied, and metabolomics was also carried out to identify metabolic pathways potentially targeted by CeO₂NPs. Results showed that the coating with chitosan reduced NP aggregation and increased the stability in water. Nonetheless, the Ce accumulation in mussels was similar in all treatments. As for biological effects, all three types of CeO₂NPs reduced significantly the level of reactive oxygen species and the activity of superoxide dismutase, glutathione peroxidase and glutathione-S-transferase. The effect was more pronounced in individuals exposed to CeO₂NPs coated with alginate, which also significantly induced the activity of the electron transport system. Metabolomics analysis of amino acid metabolism showed modulation only in mussels treated with CeO₂NPs coated with alginate. In this group, 25 metabolites belonging to nucleotides, lipids/sterols and organic osmolytes were also modulated, suggesting that the nanoparticles affect energetic metabolism and osmoregulation of mussels. This study highlights the key role of the interaction between nanoparticles and natural molecules as a driver of nanoparticle ecotoxicity.

In silico nanosafety assessment tools and their ecosystem-level integration prospect

Engineered nanomaterials (ENMs) have tremendous potential in many fields, but their applications and commercialization are difficult to widely implement due to their safety concerns. Recently, in silico nanosafety assessment has become an important and necessary tool to realize the safer-by-design strategy of ENMs and at the same time to reduce animal tests and exposure experiments. Here, in silico nanosafety assessment tools are classified into three categories according to their methodologies and objectives, including (i) data-driven prediction for acute toxicity, (ii) fate modeling for environmental pollution, and (iii) nano-biological interaction modeling for long-term biological effects. Released ENMs may cross environmental boundaries and undergo a variety of transformations in biological and environmental media. Therefore, the potential impacts of ENMs must be assessed from a multimedia perspective and with integrated approaches considering environmental and biological effects. Ecosystems with biodiversity and an abiotic environment may be used as an excellent integration platform to assess the community- and ecosystem-level nanosafety. In this review, the advances and challenges of in silico nanosafety assessment tools are carefully discussed. Furthermore, their integration at the ecosystem level may provide more comprehensive and reliable nanosafety assessment by establishing a site-specific interactive system among ENMs, abiotic environment, and biological communities.

What Is on the Outside Matters-Surface Charge and Dissolve Organic Matter Association Affect the Toxicity and Physiological Mode of Action of Polystyrene Nanoplastics to C. elegans

To better understand nanoplastic effects, the potential for surface functionalization and dissolve organic matter eco-corona formation to modify the mechanisms of action and toxicity of different nanoplastics needs to be established. Here, we assess how different surface charges modifying functionalization (postive (+ve) aminated; neutral unfunctionalized; negative (-ve) carboxylated) altered the toxicity of 50 and 60 nm polystyrene nanoplastics to the nematode Caenorhabditis elegans. The potency for effects on survival, growth, and reproduction reduced in the order +ve aminated > neutral unfunctionalized ≫ -ve carboxylated with toxicity >60-fold higher for the +ve than -ve charged forms. Toxicokinetic-toxicodynamic modeling (DEBtox) showed that the charge-related potency was primarily linked to differences in effect thresholds and dose-associated damage parameters, rather than to toxicokinetic parameters. This suggests that surface functionalization may change the nature of nanoplastic interactions with membrane and organelles leading to variations in toxicity. Eco-corona formation reduced the toxicity of all nanoplastics indicating that organic molecule associations may passivate surfaces. Between particles, eco-corona interactions resulting in more equivalent effects; however, even despite these changes, the order of potency of the charged forms was retained. These results have important implications for the development of future grouping approaches.

Xenobiotic metabolism and transport in Caenorhabditis elegans

Caenorhabditis elegans has emerged as a major model in biomedical and environmental toxicology. Numerous papers on toxicology and pharmacology in C. elegans have been published, and this species has now been adopted by investigators in academic toxicology, pharmacology, and drug discovery labs. C. elegans has also attracted the interest of governmental regulatory agencies charged with evaluating the safety of chemicals. However, a major, fundamental aspect of toxicological science remains underdeveloped in C. elegans: xenobiotic metabolism and transport processes that are critical to understanding toxicokinetics and toxicodynamics, and extrapolation to other species. The aim of this review was to initially briefly describe the history and trajectory of the use of C. elegans in toxicological and pharmacological studies. Subsequently, physical barriers to chemical uptake and the role of the worm microbiome in xenobiotic transformation were described. Then a review of what is and is not known regarding the classic Phase I, Phase II, and Phase III processes was performed. In addition, the following were discussed (1) regulation of xenobiotic metabolism; (2) review of published toxicokinetics for specific chemicals; and (3) genetic diversity of these processes in C. elegans. Finally, worm xenobiotic transport and metabolism was placed in an evolutionary context; key areas for future research highlighted; and implications for extrapolating C. elegans toxicity results to other species discussed.

Effect of Nanoparticle Size and Natural Organic Matter Composition on the Bioavailability of Polyvinylpyrrolidone-Coated Platinum Nanoparticles to a Model Freshwater Invertebrate

The bioavailability of dissolved Pt(IV) and polyvinylpyrrolidone-coated platinum nanoparticles (PtNPs) of five different nominal hydrodynamic diameters (20, 30, 50, 75, and 95 nm) was characterized in laboratory experiments using the model freshwater snail Lymnaea stagnalis. Dissolved Pt(IV) and all nanoparticle sizes were bioavailable to L. stagnalis. Platinum bioavailability, inferred from conditional uptake rate constants, was greater for nanoparticulate than dissolved forms and increased with increasing nanoparticle hydrodynamic diameter. The effect of natural organic matter (NOM) composition on PtNP bioavailability was evaluated using six NOM samples at two nanoparticle sizes (20 and 95 nm). NOM suppressed the bioavailability of 95 nm PtNPs in all cases, and DOM reduced sulfur content exhibited a positive correlation with 95 nm PtNP bioavailability. The bioavailability of 20 nm PtNPs was only suppressed by NOM with a low reduced sulfur content. The physiological elimination of Pt accumulated after dissolved Pt(IV) exposure was slow and constant. In contrast, the elimination of Pt accumulated after PtNP exposures exhibited a triphasic pattern likely involving in vivo PtNP dissolution. This work highlights the importance of PtNP size and interfacial interactions with NOM on Pt bioavailability and suggests that in vivo PtNP transformations could yield unexpectedly higher adverse effects to organisms than dissolved exposure alone.

Surface Properties and Environmental Transformations Controlling the Bioaccumulation and Toxicity of Cerium Oxide Nanoparticles: A Critical Review

Increasing production and utilization of cerium oxide nanoparticles (CNPs) in recent years have raised wide concerns about their toxicity. Numerous studies have been conducted to reveal the toxicity of CNPs, but the results are sometimes contradictory. In this review, the most important factors in mediating CNPs toxicity are discussed, including (1) the roles of physicochemical properties (size, morphology, agglomeration condition, surface charge, coating and surface valence state) on CNPs toxicity; (2) the phase transfer and transformation process of CNPs in various aqueous, terrestrial, and airborne environments; and (3) reductive dissolution of CNPs core and their chemical reactions with phosphate, sulfate/S^2-, and ferrous ions. The physicochemical properties play key roles in the interactions of CNPs with organisms and consequently their environmental transformations, reactivity and toxicity assessment. Also, the speciation transformations of CNPs caused by reactions with (in)organic ligands in both environmental and biological systems would further alter their fate, transport, and toxicity potential. Thus, the toxicity mechanisms are proposed based on the physical damage of direct adsorption of CNPs onto the cell membrane and chemical inhibition (including oxidative stress and interaction of CNPs with biomacromolecules). Finally, the current knowledge gaps and further research needs in identifying the toxicological risk factors of CNPs under realistic environmental conditions are highlighted, which might improve predictions about their potential environmental influences. This review aims to provide new insights into cost-effectiveness of control options and management practices to prevent environmental risks from CNPs exposure.

Tradeoff between risks through ingestion of nanoparticle contaminated water or fish: Human health perspective

This study proposed a framework (termed as "nanoHealthRisk" hereafter) for incorporating i) interaction of nanoparticles (NPs) with fishes, ii) availability of NPs to the human digestive system, and iii) estimation of health risk due to fish consumption and inadvertent ingestion of NP-contaminated surface water, for the first time as per the literature review. The framework was applied for estimating health risks due to hypothetical exposures of pristine ZnO, CuO, and TiO₂ NPs (without any surface functionalization) from fish tissues. Values of bio- concentration factors (BCF) of ZnO, CuO, and TiO₂ NPs in fish and model distributions of bio-assimilation factor of ZnO, CuO and TiO₂ NPs in the human digestive system were incorporated explicitly in the risk assessment of NPs for the first time. ZnO NP was observed to be transferred more to the human digestive system from aqueous matrix than the other two NPs. Maximum allowable values of NP posing no risk were found to be 0.115 mg/L, 0.152 mg/L, and 1.77 × 10⁷ mg/L for pristine ZnO, CuO and TiO₂ NP, respectively. At the environmental concentration range, exposures of studied NPs from aquatic environment under the assumptions used did not pose any health risk under the conditions studied in this study. More work is required to (1) Estimate bio-concentration factors of a mixture of NPs with other constituents in fish tissues, (2) Estimate dissolution of NP from fish tissue in human digestive media, (3) Generate new data to develop reference dose of NP for human health risk assessment, and (4) Study effect of NP fate in the water on health risk through fish consumption pathway. Until all above-mentioned aspects are not explicitly incorporated in the risk assessment framework, risk estimates do not represent the risk from environment completely. Thus, continuous monitoring of these NPs in the environment is required to protect health due to chronic exposure of small concentrations of NPs from an aqueous matrix.

Nanomaterial Transformations in the Environment: Effects of Changing Exposure Forms on Bioaccumulation and Toxicity

In the environment, nanomaterials (NMs) are subject to chemical transformations, such as redox reactions, dissolution, coating degradation, and organic matter, protein, and macromolecule binding, and physical transformations including homo or heteroagglomeration. The combination of these reactions can result in NMs with differing characteristics progressing through a functional fate pathway that leads to the formation of transformed NM functional fate groups with shared properties. To establish the nature of such effects of transformation on NMs, four main types of studies are conducted: 1) chemical aging for transformation of pristine NMs; 2) manipulation of test media to change NM surface properties; 3) aging of pristine NMs water, sediment, or soil; 4) NM aging in waste streams and natural environments. From these studies a paradigm of aging effects on NM uptake and toxicity can be developed. Transformation, especially speciation changes, largely results in reduced potency. Further reactions at the surface resulting in processes, such as ecocorona formation and heteroagglomeration may additionally reduce NM potency. When NMs of differing potency transform and enter environments, common transformation reaction occurring in receiving system may act to reduce the variation in hazard between different initial NMs leading to similar actual hazard under realistic exposure conditions.

Tuning Properties of Cerium Dioxide Nanoparticles by Surface Modification with Catecholate-type of Ligands

Cerium dioxide (CeO₂) finds applications in areas such as corrosion protection, solar cells, or catalysis, finding increasing applications in biomedicine. This work reports on surface-modified CeO₂ particles in order to tune their applicability in the biomedical field. Stable aqueous CeO₂ sol, consisting of 3-4 nm in size crystallites, was synthesized using forced hydrolysis. The coordination of catecholate-type of ligands (catechol, caffeic acid, tiron, and dopamine) to the surface-Ce atoms is followed with the appearance of absorption in the visible spectral range as a consequence of interfacial charge-transfer complex formation. The spectroscopic observations are complemented with the density functional theory calculations using a cluster model. The synthesized samples were characterized by X-ray diffraction analysis, transmission electron microscopy, and nitrogen adsorption-desorption isotherms. The ζ-potential measurements indicated that the stability of CeO₂ sol is preserved upon surface modification. The pristine CeO₂ nanoparticles (NPs) are nontoxic against pre-osteoblast cells in the entire studied concentration range (up to 1.5 mM). Hybrid CeO₂ NPs, capped with dopamine or caffeic acid, display toxic behavior for concentrations ≥0.17 and 1.5 mM, respectively. On the other hand, surface-modified CeO₂ NPs with catechol and tiron promote the proliferation of pre-osteoblast cells.

Comparison of Nanomaterials for Delivery of Double-Stranded RNA in Caenorhabditis elegans

RNA interference is a promising crop protection technology that has seen rapid development in the past several years. Here, we investigated polyamino acid biopolymers, inorganic nanomaterials, and hybrid organic-inorganic nanomaterials for delivery of dsRNA and efficacy of gene knockdown using the model nematode Caenorhabditis elegans. Using an oral route of delivery, we are able to approximate how nanomaterials will be delivered in the environment. Of the materials investigated, only Mg-Al layered double-hydroxide nanoparticles were effective at gene knockdown in C. elegans, reducing marker gene expression to 66.8% of that of the control at the lowest tested concentration. In addition, we identified previously unreported injuries to the mouthparts of C. elegans associated with the use of a common cell-penetrating peptide, poly-l-arginine. Our results will allow the pursuit of further research into promising materials for dsRNA delivery and also allow for the exclusion of those with little efficacy or deleterious effects.

Nanoparticle Charge and Size Control Foliar Delivery Efficiency to Plant Cells and Organelles

Fundamental and quantitative understanding of the interactions between nanoparticles and plant leaves is crucial for advancing the field of nanoenabled agriculture. Herein, we systematically investigated and modeled how ζ potential (-52.3 mV to +36.6 mV) and hydrodynamic size (1.7-18 nm) of hydrophilic nanoparticles influence delivery efficiency and pathways to specific leaf cells and organelles. We studied interactions of nanoparticles of agricultural interest including carbon dots (CDs, 0.5 and 5 mg/mL), cerium oxide (CeO₂, 0.5 mg/mL), and silica (SiO₂, 0.5 mg/mL) nanoparticles with leaves of two major crop species having contrasting leaf anatomies: cotton (dicotyledon) and maize (monocotyledon). Biocompatible CDs allowed real-time tracking of nanoparticle translocation and distribution in planta by confocal fluorescence microscopy at high spatial (∼200 nm) and temporal (2-5 min) resolution. Nanoparticle formulations with surfactants (Silwet L-77) that reduced surface tension to 22 mN/m were found to be crucial for enabling rapid uptake (<10 min) of nanoparticles through the leaf stomata and cuticle pathways. Nanoparticle-leaf interaction (NLI) empirical models based on hydrodynamic size and ζ potential indicate that hydrophilic nanoparticles with <20 and 11 nm for cotton and maize, respectively, and positive charge (>15 mV), exhibit the highest foliar delivery efficiencies into guard cells (100%), extracellular space (90.3%), and chloroplasts (55.8%). Systematic assessments of nanoparticle-plant interactions would lead to the development of NLI models that predict the translocation and distribution of nanomaterials in plants based on their chemical and physical properties.

Bioaccumulation kinetics and tissue distribution of silver nanoparticles in zebrafish: The mechanisms and influence of natural organic matter

The wide application of silver nanoparticles (AgNPs) has inevitably led to their release into the natural aquatic environment. Natural organic matter (NOM) is ubiquitous and would influence the fate and effects of these nanoparticles in such aquatic environments. Here we demonstrate that NOM plays an important role in the bioaccumulation kinetics and tissue distribution of AgNPs in zebrafish. In the presence of humic acid and fulvic acid, the uptake rates of AgNPs decreased while the depuration rates of AgNPs increased. As a result, the bioconcentration factor (BCF) of AgNPs in the entire body of the zebrafish was reduced. AgNPs were mainly taken up by the zebrafish via oral ingestion and were greatly accumulated in the liver, intestine and gill. In the intestine, NOM effectively inhibited the AgNPs from penetrating the cell membranes into internal tissues and also suppressed the disintegration and dissolution of AgNPs in gastrointestinal fluid, thereby decreasing the absorption of Ag by zebrafish. This research underlines the significance of incorporating the effects of NOM into predictive models for accurately assessing the toxicity and ecological risks of nanoparticles in natural aquatic environments.

Transformation pathways and fate of engineered nanoparticles (ENPs) in distinct interactive environmental compartments: A review

The ever increasing production and use of nano-enabled commercial products release the massive amount of engineered nanoparticles (ENPs) in the environment. An increasing number of recent studies have shown the toxic effects of ENPs on different organisms, raising concerns over the nano-pollutants behavior and fate in the various environmental compartments. After the release of ENPs in the environment, ENPs interact with various components of the environment and undergoes dynamic transformation processes. This review focus on ENPs transformations in the various environmental compartments. The transformation processes of ENPs are interrelated to multiple environmental aspects. Physical, chemical and biological processes such as the homo- or hetero-agglomeration, dissolution/sedimentation, adsorption, oxidation, reduction, sulfidation, photochemically and biologically mediated reactions mainly occur in the environment consequently changes the mobility and bioavailability of ENPs. Physico-chemical characteristics of ENPs (particle size, surface area, zeta potential/surface charge, colloidal stability, and core-shell composition) and environmental conditions (pH, ionic strength, organic and inorganic colloids, temperature, etc.) are the most important parameters which regulated the ENPs environmental transformations. Meanwhile, in the environment, organisms encountered multiple transformed ENPs rather than the pristine nanomaterials due to their interactions with various environmental materials and other pollutants. Thus it is the utmost importance to study the behavior of transformed ENPs to understand their environmental fate, bioavailability, and mode of toxicity.

Applications of nano-materials in diverse dentistry regimes

Research and development in the applied sciences at the atomic or molecular level is the order of the day under the domain of nanotechnology or nano-science with enormous influence on nearly all areas of human health and activities comprising diverse medical fields such as pharmacological studies, clinical diagnoses, and supplementary immune system. The field of nano-dentistry has emerged due to the assorted dental applications of nano-technology. This review provides a brief introduction to the general nanotechnology field and a comprehensive overview of the synthesis features and dental uses of nano-materials including current innovations and future expectations with general comments on the latest advancements in the mechanisms and the most significant toxicological dimensions.

Exposure to nickel oxide nanoparticles insinuates physiological, ultrastructural and oxidative damage: A life cycle study on Eisenia fetida

Although, health and environmental hazards of Ni are ironclad; however, that of Nickle oxide nanoparticles (NiO-NPs) are still obscure. Therefore, impact of NiO-NPs exposure (0, 5, 50, 200, 500 and 1000 mg kg^-1 soil) on the earthworm (Eisenia fetida) survival (at 28th day), reproduction (at 56th day), histopathology, ultrastructures, antioxidant enzymes and oxidative DNA damage was appraised in full life cycle study. Lower concentrations of NiO-NPs (5, 50 and 200) did not influence the survival, reproduction and growth rate of adult worms significantly. However, reproduction reduced by 40-50% with 500 and 1000 mg kg^-1 exposure, which also induced oxidative stress leading to DNA damage in earthworms. Ultrastructural observation and histology of earthworms exposed to higher NiO-NPs concentrations revealed abnormalities in epithelium layer, microvilli and mitochondria with underlying pathologies of epidermis and muscles, as well as adverse effects on the gut barrier. To the best of our knowledge, this is the first study unveiling the adverse effects of NiO-NPs on a soil invertebrate (Eisenia fetida). Our findings clue towards looking extensively into the risks of NiO-NPs on soil organisms bearing agricultural and environmental significance.

Single-Particle Investigation of Environmental Redox Processes of Arsenic on Cerium Oxide Nanoparticles by Collision Electrochemistry

Quantification of chemical reactions of nanoparticles (NPs) and their interaction with contaminants is a fundamental need to the understanding of chemical reactivity and surface chemistry of NPs released into the environment. Herein, we propose a novel strategy employing single-particle electrochemistry showing that it is possible to measure reactivity, speciation, and loading of As³⁺ on individual NPs, using cerium oxide (CeO₂) as a model system. We demonstrate that redox reactions and adsorption processes can be electrochemically quantified with high sensitivity via the oxidation of As³⁺ to As⁵⁺ at 0.8 V versus Ag/AgCl or the reduction of As³⁺ to As⁰ at -0.3 V (vs Ag/AgCl) generated by collisions of single particles at an ultramicroelectrode. Using collision electrochemistry, As³⁺ concentrations were determined in basic conditions showing a maximum adsorption capacity at pH 8. In acidic environments (pH < 4), a small fraction of As³⁺ was oxidized to As⁵⁺ by surface Ce⁴⁺ and further adsorbed onto the CeO₂ surface as a As⁵⁺ bidentate complex. The frequency of current spikes (oxidative or reductive) was proportional to the concentration of As³⁺ accumulated onto the NPs and was found to be representative of the As³⁺ concentration in solution. Given its sensitivity and speciation capability, the method can find many applications in the analytical, materials, and environmental chemistry fields where there is a need to quantify the reactivity and surface interactions of NPs. This is the first study demonstrating the capability of single-particle collision electrochemistry to monitor the interaction of heavy metal ions with metal oxide NPs. This knowledge is critical to the fundamental understanding of the risks associated with the release of NPs into the environment for their safe implementation and practical use.

Behavior of cerium dioxide nanoparticles in chernozem soils at different exposure scenarios

Nowadays, widespread application of engineered nanoparticles (ENPs) inevitably leads to their release into the environment. Soils are regarded as the ultimate sink for ENPs. The study on mobility of ENPs in soils is important in the assessment of potential risks related to their toxicity. The behavior of ENPs is dependent not only on parameters of soil but also on exposure scenarios, namely, the amount of ENPs trapped in soil. In the present work, the mobility of cerium dioxide nanoparticles (nCeO₂) in soils at different exposure scenarios has been studied. The relationship between mobility of nCeO₂ and their concentration in soil in the range from 1 to 1000 μg g^-1 is evaluated. It is shown that the mobility of nCeO₂ decreases with decreasing their concentration in soil and attains the minimum value at the concentration of nCeO₂ below 10 μg g^-1. In relative terms, only about 0.1-0.2% of nCeO₂ at their concentration in soil 10-1000 μg g^-1 are mobile and can migrate in soil profile under saturated conditions. The major portion of nCeO₂ (about 99.8%) remains immobile in soil. Evidently, the vertical transport of nCeO₂ in soil profile should depend on volume of released suspensions. In the case of small or moderate wet deposition, nanoparticles will accumulate in upper soil horizons, where biological activity is highest, and affect the soil inhabitants (plant roots, earthworms, insects, microorganisms, etc.).

Transport and retention of differently coated CeO2 nanoparticles in saturated sediment columns under laboratory and near-natural conditions

Where surface-functionalized engineered nanoparticles (NP) occur in drinking water catchments, understanding their transport within and between environmental compartments such as surface water and groundwater is crucial for risk assessment of drinking water resources. The transport of NP is mainly controlled by (i) their surface properties, (ii) water chemistry, and (iii) surface properties of the stationary phase. Therefore, functionalization of NP surfaces by organic coatings may change their fate in the environment. In laboratory columns, we compared the mobility of CeO₂ NP coated by the synthetic polymer polyacrylic acid (PAA) with CeO₂ NP coated by natural organic matter (NOM) and humic acid (HA), respectively. The effect of ionic strength on transport in sand columns was investigated using deionized (DI) water and natural surface water with 2.2 mM Ca²⁺ (soft) and 4.5 mM Ca²⁺ (hard), respectively. Furthermore, the relevance of these findings was validated in a near-natural bank filtration experiment using HA-CeO₂ NP. PAA-CeO₂ NP were mobile under all tested water conditions, showing a breakthrough of 60% irrespective of the Ca²⁺ concentration. In contrast, NOM-CeO₂ NP showed a lower mobility with a breakthrough of 27% in DI and < 10% in soft surface water. In hard surface water, NOM-CeO₂ NP were completely retained in the first 2 cm of the column. The transport of HA-CeO₂ NP in laboratory columns in soft surface water was lower compared to NOM-CeO₂ NP with a strong accumulation of CeO₂ NP in the first few centimeters of the column. Natural coatings were generally less stabilizing and more susceptible to increasing Ca²⁺ concentrations than the synthetic coating. The outdoor column experiment confirmed the low mobility of HA-CeO₂ NP under more complex environmental conditions. From our experiments, we conclude that the synthetic polymer is more efficient in facilitating NP transport than natural coatings and hence, CeO₂ NP mobility may vary significantly depending on the surface coating.

In vivo immunomodulatory and antioxidant properties of nanoceria (nCeO2) in the marine mussel Mytilus galloprovincialis

Cerium nanoparticles (nCeO₂) are increasingly utilized in a wide variety of industrial, environmental and biomedical applications, and are therefore expected to be released in the aquatic environment. Due to its peculiar redox properties, nCeO₂ may present unique hazards to environmental and human health. Previous data showed that in the hemocytes of the marine bivalve Mytilus galloprovincialis, in vitro exposure to a particular type of nCeO₂ (9 nm, characterized by negative ζ-potential, high H₂O₂ scavenging capacity and Ce³⁺/Ce⁴⁺ surface ratio) reduced basal ROS production, lysosomal membrane stability and phagocytic activity in the presence of hemolymph serum; the effects observed were partly ascribed to the formation of a SOD-protein corona in the hemolymph. In this work, the in vivo effects of this type of nCeO₂ were investigated in mussels exposed to 100 μg/L nCeO₂ for 96 h; several lysosomal, immune, inflammatory and antioxidant biomarkers were measured at cellular (hemocytes) and tissue (gills, digestive gland) level. Molecular responses were evaluated in hemocytes and digestive gland by determining expression of 11 selected genes related to known biological functions. The results show specific immunomodulatory and antioxidant effects of nCeO₂ at different levels of biological organization in the absence of Cerium tissue accumulation. These data further support the redox mechanisms at the basis of the physiological effects of nCeO₂. Finally, in order to evaluate the possible impact at the whole organism level, the effects of nCeO₂ were evaluated in the 48 h embryotoxicity assay in a wide concentration range. However, nCeO₂ exposure resulted in a small reduction in normal embryo development. Overall, the results demonstrate that in mussels nCeO₂ can selectively modulate different physiological processes at different levels of biological organization.

Caenorhabditis elegans as a complete model organism for biosafety assessments of nanoparticles

The number of biosafety evaluation studies of nanoparticles (NPs) using different biological models is increasing with the rapid development of nanotechnology. Thus far, nematode Caenorhabditis elegans (C. elegans), as a complete model organism, has become an important in vivo alternative assay system to assess the risk of NPs, especially at the environmental level. According to results of qualitative and quantitative analyses, it can be concluded that studies of nanoscientific research using C. elegans is persistently growing. However, the comprehensive conclusion and analysis of toxic effects of NPs in C. elegans are limited and chaotic. This review focused on the effects, especially sublethal ones, induced by NPs in C. elegans, including the development, intestinal function, immune response, neuronal function, and reproduction, as well as the underlying mechanisms of NPs causing these effects, including oxidative stress and alterations of several signaling pathways. Furthermore, we presented some factors that influence the toxic effects of NPs in C. elegans. The advantages and limitations of using nematodes in the nanotoxicology study were also discussed. Finally, we predicted that the application of C. elegans to assess long-term impacts of metal oxide NPs in the ecosystem would become a vital part of the nanoscientific research field, which provided an insight for further study.

Effects of cerium oxide nanoparticles on bacterial growth and behaviors: induction of biofilm formation and stress response

In this paper, the effects of cerium oxide nanoparticles (CeO₂ NPs) on the group bacterial behaviors were elaborated. After 36-h cultivation, the biofilm biomass was enhanced by the sub-lethal concentrations of 0.5 and 2 mg/L CeO₂ NP exposure. Meanwhile, the promoted production of total amino acids in microbes further resulted in the increased surface hydrophobicity and percentage aggregation. To resist the CeO₂ NPs stress, the biofilm exhibited a double-layer microstructure, with the protein (PRO) and living cells occupying the bottom, the polysaccharide (PS), and dead cells dominating the top. The bacterial diversity was highly suppressed and Citrobacter and Pseudomonas from the phylum of γ-Proteobacteria strongly dominated the biofilm, indicating the selective and enriched effects of CeO₂ NPs on resistant bacteria. The stimulated inherent resistance of biofilm was reflected by the reduced adenosine triphosphate (ATP) content after 4 h exposure. The increased levels of reactive oxygen species (ROS) in the treatments of 8 h CeO₂ NP exposure led to the upregulated quorum sensing signals of acylated homoserine lactone (AHL) and autoinducer 2 (AI-2), beneficial to mitigating the environmental disturbance of CeO₂ NPs. These results provide evidences for the accelerating effects of CeO₂ NPs on biofilm formation through oxidative stress, which expand the understanding of the ecological effects of CeO₂ NPs.

Copper and zinc fractionation in soils treated with CuO and ZnO nanoparticles: The effect of soil type and moisture content

Increased use of nano-products results in the release of nano-constituents into various environmental media, including soils. The metal components of inorganic nanoparticles are subject to partitioning during the various soil phases. The aim of the study presented here was to estimate Zn and Cu distribution in different soils after treatment with nano-ZnO and nano-CuO (10 mg kg^-1) under various moisture conditions (30, 50 and 80% of water holding capacity). Samples were incubated for 24 h, 3 and 24 months. In addition, the effect of the form of Cu (nano-CuO, nano-Cu, bulk-CuO and CuCl₂) on Cu partitioning was estimated. The assessment of metal distribution was made using sequential analysis, which allowed to distinguish five fractions: exchangeable (F1), carbonate (F2), bound with Fe-Mn oxides (F3), bound with organic matter (F4), and residual (F5). The results of the analyses revealed that in the treated and untreated soil the percentage of potentially bioavailable metal fractions (F1, F2) was considerably lower than the total content of fractions considered to be stable (F3, F4, F5). Fractionation of Cu and Zn differed, which could have resulted from different rates of solubility as well as from soil properties and moisture content.

Approaches for the quantitative analysis of oxidation state in cerium oxide nanomaterials

Cerium oxide nanomaterials (nanoceria, CNMs) are receiving increased attention from the research community due to their unique chemical properties, most prominent of which is their ability to alternate between the Ce3+ and Ce4+ oxidation states. While many analytical techniques and methods have been employed to characterize the amounts of Ce3+ and Ce4+ present (Ce3+/Ce4+ ratio) within nanoceria materials, to-date no studies have used multiple complementary analytical tools (orthogonal analysis) with technique-independent oxidation state controls for quantitative determinations of the Ce3+/Ce4+ ratio. Here, we describe the development of analytical methods measuring the oxidation states of nanoceria analytes using technique-independent Ce3+ (CeAlO3:Ge) and Ce4+ (CeO2) control materials, with a particular focus on x-ray photoelectron spectroscopy (XPS) and electron energy loss spectroscopy (EELS) approaches. The developed methods were demonstrated in characterizing a suite of commercial nanoceria products, where the two techniques (XPS and EELS) were found to be in good agreement with respect to Ce3+/Ce4+ ratio. Potential sources of artifacts and discrepancies in the measurement results were also identified and discussed, alongside suggestions for interpreting oxidation state results using the different analytical techniques. The results should be applicable towards producing more consistent and reproducible oxidation state analyses of nanoceria materials.

Strategies for robust and accurate experimental approaches to quantify nanomaterial bioaccumulation across a broad range of organisms

One of the key components for environmental risk assessment of engineered nanomaterials (ENMs) is data on bioaccumulation potential. Accurately measuring bioaccumulation can be critical for regulatory decision making regarding material hazard and risk, and for understanding the mechanism of toxicity. This perspective provides expert guidance for performing ENM bioaccumulation measurements across a broad range of test organisms and species. To accomplish this aim, we critically evaluated ENM bioaccumulation within three categories of organisms: single-celled species, multicellular species excluding plants, and multicellular plants. For aqueous exposures of suspended single-celled and small multicellular species, it is critical to perform a robust procedure to separate suspended ENMs and small organisms to avoid overestimating bioaccumulation. For many multicellular organisms, it is essential to differentiate between the ENMs adsorbed to external surfaces or in the digestive tract and the amount absorbed across epithelial tissues. For multicellular plants, key considerations include how exposure route and the role of the rhizosphere may affect the quantitative measurement of uptake, and that the efficiency of washing procedures to remove loosely attached ENMs to the roots is not well understood. Within each organism category, case studies are provided to illustrate key methodological considerations for conducting robust bioaccumulation experiments for different species within each major group. The full scope of ENM bioaccumulation measurements and interpretations are discussed including conducting the organism exposure, separating organisms from the ENMs in the test media after exposure, analytical methods to quantify ENMs in the tissues or cells, and modeling the ENM bioaccumulation results. One key finding to improve bioaccumulation measurements was the critical need for further analytical method development to identify and quantify ENMs in complex matrices. Overall, the discussion, suggestions, and case studies described herein will help improve the robustness of ENM bioaccumulation studies.

Colloidal stabilization of CeO2 nanomaterials with polyacrylic acid, polyvinyl alcohol or natural organic matter

Engineered nanomaterials (ENM) such as nano-sized cerium dioxide (CeO₂) are increasingly applied. Meanwhile, concerns on their environmental fate are rising. Understanding the fate of ENM within and between environmental compartments such as surface water and groundwater is crucial for the protection of drinking water resources. Therefore, the colloidal stability of CeO₂ ENM (2 mg L^-1) was assessed with various surface coatings featuring different physico-chemical properties such as weakly anionic polyvinyl alcohol (PVA), strongly anionic polyacrylic acid (PAA) or complex natural organic matter (NOM) at various water compositions in batch experiments (pH 2-12, ionic strength 0-5 mM KCl or CaCl₂). While uncoated CeO₂ ENM aggregate in the range of pH 4-8 in 1 mM KCl solution, the results show that PAA, PVA and NOM surface coatings stabilize CeO₂-ENM at neutral and alkaline pH in 1 mM KCl solution. Stabilization by PAA and NOM is associated with strongly negative zeta potentials below -20 mV, suggesting electrostatic repulsion as stabilization mechanism. No aggregation was detected up to 5 mM KCl for PAA- and NOM-coated CeO₂ ENM. In contrast, CaCl₂ induced aggregation at >2.2 mM CaCl₂ for PAA and NOM-coated CeO₂ ENM respectively. PVA-coated ENM showed zeta potentials of -15 mV to -5 mV in the presence of 0-5 mM ionic strength, suggesting steric effects as stabilization mechanism. The hydrodynamic diameter of PVA-coated ENM was larger compared to PAA and NOM at low ionic strength, but the size did not increase with ionic strength of the suspensions. The effect of ionic strength and counter ion valency (pH 7) on the colloidal stability of ENM depends on the prevailing stabilization mechanism of the organic coating. NOM can be similarly effective in colloidal stabilization of CeO₂-ENM as PAA. Our results suggest natural Ca-rich waters will lead to ENM agglomeration even of coated CeO₂-ENM.

An assessment of applicability of existing approaches to predicting the bioaccumulation of conventional substances in nanomaterials

The experimental determination of bioaccumulation is challenging, and a number of approaches have been developed for its prediction. It is important to assess the applicability of these predictive approaches to nanomaterials (NMs), which have been shown to bioaccumulate. The octanol/water partition coefficient (K_OW ) may not be applicable to some NMs that are not found in either the octanol or water phases but rather are found at the interface. Thus the K_OW values obtained for certain NMs are shown not to correlate well with the experimentally determined bioaccumulation. Implementation of quantitative structure-activity relationships (QSARs) for NMs is also challenging because the bioaccumulation of NMs depends on nano-specific properties such as shape, size, and surface area. Thus there is a need to develop new QSAR models based on these new nanodescriptors; current efforts appear to focus on digital processing of NM images as well as the conversion of surface chemistry parameters into adsorption indices. Water solubility can be used as a screening tool for the exclusion of NMs with short half-lives. Adaptation of fugacity/aquivalence models, which include physicochemical properties, may give some insights into the bioaccumulation potential of NMs, especially with the addition of a biota component. The use of kinetic models, including physiologically based pharmacokinetic models, appears to be the most suitable approach for predicting bioaccumulation of NMs. Furthermore, because bioaccumulation of NMs depends on a number of biotic and abiotic factors, it is important to take these factors into account when one is modeling bioaccumulation and interpreting bioaccumulation results. Environ Toxicol Chem 2018;37:2972-2988. © 2018 SETAC.

Matricidal hatching can induce multi-generational effects in nematode Caenorhabditis elegans after dietary exposure to nanoparticles

In this study, we investigated multi-generational effects and generation particle transfer in Caenorhabditis elegans following maternal food exposure to core-shell quantum dots. We found that that the Bag of Worms (BOW) phenotype in aged worms induces changes in quantum dot distribution in the parental body, which is related to the inter-generation transfer of these nanoparticles and to their effects in the offspring. To confirm these results we examined a variety of endpoints, namely, survival, reproduction, aging phenotype, oxidative stress, and intestinal fat metabolism. We show that worms born to parents at different times after exposure show different phenotypic effects as a consequence of quantum dot transfer. This evidence of trans-generational transfer and the effects of nanoparticles highlights the complex multi-generational effects and potential safety hazards that can occur under real environmental conditions.

Strategies and relative mechanisms to attenuate the bioaccumulation and biotoxicity of ceria nanoparticles in wastewater biofilms

Inhibitory effects of ceria nanoparticles (CeO₂ NPs) on biofilm were investigated individually and in combination with phosphate (P), ethylene diamine tetraacetic acid (EDTA), humic acid (HA) and citrate (CA) to further explore the toxicity alleviating solutions. Exposure to 20 mg/L CeO₂ NPs significantly decreased the performance of biofilm in nutrients removal. Distribution experiments suggested >98% of the CeO₂ NPs retained in microbial aggregates, leading to 51.26 μg/L Ce ions dissolution. The dissolved Ce^IV and its further being reduced to Ce^III stimulated the formation of O₂^- and OH, which increased lipid peroxidation level to 130.93% in biofilms. However, P/EDTA/CA captured or precipitated Ce ions, whereas EDTA/HA/CA shielded NPs-bacteria direct contacts, both disturbing the NPs adsorption, intercepting the redox transition between Ce^IV and Ce^III, reducing the generation of O₂^- and OH, thus mitigating the toxicity of CeO₂ NPs. These results illustrate the main drivers of CeO₂ NPs biotoxicity and provide safer-by-design strategies.

Influence of soil porewater properties on the fate and toxicity of silver nanoparticles to Caenorhabditis elegans

Engineered nanoparticles (NPs) entering the environment are subject to various transformations that in turn influence how particles are presented to, and taken up by, organisms. To understand the effect of soil properties on the toxicity of nanosilver to Caenorhabditis elegans, toxicity assays were performed in porewater extracts from natural soils with varying organic matter content and pH using 3-8 nm unfunctionalized silver (Ag 3-8Unf), 52-nm polyvinylpyrrolidone (PVP)-coated Ag NPs (Ag 52PVP), and AgNO₃ as ionic Ag. Effects on NP agglomeration and stability were investigated using ultraviolet-visible (UV-vis) spectroscopy and asymmetric flow field-flow fractionation (AF4); Ag⁺ showed greater overall toxicity than nanosilver, with little difference between the NP types. Increasing soil organic matter content significantly decreased the toxicity of Ag 3-8Unf, whereas it increased that of AgNO₃ . The toxicity of all Ag treatments significantly decreased with increasing porewater pH. Dissolution of both NPs in the porewater extracts was too low to have contributed to their observed toxic effects. The UV-vis spectroscopy revealed low levels of agglomeration/aggregation independent of soil properties for Ag 3-8Unf, whereas higher organic matter as well as low pH appeared to stabilize Ag 52PVP. Overall, both soil organic matter content and pH affected NP fate as well as toxicity to C. elegans; however, there appears to be no clear connection between the measured particle characteristics and their effect. Environ Toxicol Chem 2018;37:2609-2618. © 2018 SETAC.

Trophic Transfer and Transformation of CeO2 Nanoparticles along a Terrestrial Food Chain: Influence of Exposure Routes

The trophic transfer and transformation of CeO₂ nanoparticles (NPs) through a simulated terrestrial food chain were investigated using a radiotracer technique and X-ray absorption near edge structure (XANES). Radioactive ¹⁴¹CeO₂ NPs were applied to head lettuce ( Lactuca sativa), treated via root exposure in its potting soil (5.5 or 11 mg/plant) for 30 days or foliar exposure (7.2 mg/plant, with half of the leaves treated and the other half not) for 7 days. Subsequently, two groups of land snails ( Achatina fulica) were exposed to ¹⁴¹Ce via either a direct (i.e., feeding on the lettuce leaves with ¹⁴¹Ce-contaminated surfaces) or an indirect/trophic (i.e., feeding on the lettuce leaves with systemically distributed ¹⁴¹Ce) route. To evaluate the influence of exposure routes, the Ce contents of the lettuce, snail tissues, and feces were determined by radioactivity measurements. The results show that both assimilation efficiencies (AEs) and food ingestion rates of Ce are greater for the trophic (indirect) exposure. The low AEs indicate that the CeO₂ NPs ingested by snails were mostly excreted subsequently, and those that remained in the body were mainly concentrated in the digestive gland. XANES analysis shows that >85% of Ce was reduced to Ce(III) in the digestive gland under direct exposure, whereas Ce in the rest of the food chain (including feces) was largely in its original oxidized (IV) state. This study suggests that CeO₂ NPs present in the environment may be taken up by producers and transferred to consumers along food chains and trophic transfer may affect food safety.

Bioaccumulation of CeO2 Nanoparticles by Earthworms in Biochar-Amended Soil: A Synchrotron Microspectroscopy Study

The interactions of nanoparticles (NPs) with biochar and soil components may substantially influence NP availability and toxicity to biota. In the present study, earthworms ( Eisenia fetida) were exposed for 28 days to a residential or agricultural soil amended with 0-2000 mg of CeO₂ NP/kg and with biochar (produced by the pyrolysis of pecan shells at 350 and 600 °C) at various application rates [0-5% (w/w)]. After 28 days, earthworms were depurated and analyzed for Ce content, moisture content, and lipid peroxidation. The results showed minimal toxicity to the worms; however, biochar (350 or 600 °C) was the dominant factor, accounting for 94 and 84% of the variance for the moisture content and lipid peroxidation, respectively, in the exposed earthworms. For both soils with 1000 mg of CeO₂/kg at 600 °C, biochar significantly decreased the accumulation of Ce in the worm tissues. Amendment with 350 °C biochar had mixed responses on Ce uptake. Analysis by micro X-ray fluorescence (μ-XRF) and micro X-ray absorption near edge structure (μ-XANES) was used to evaluate Ce localization, speciation, and persistence in CeO₂- and biochar-exposed earthworms after depuration for 12, 48, and 72 h. Earthworms from the 500 mg of CeO₂/kg and 0% biochar treatments eliminated most Ce after a 48 h depuration period. However, in the same treatment and with 5% BC-600 (biochar pyrolysis temperature of 600 °C), ingested biochar fragments (∼50 μm) with Ce adsorbed to the surfaces were retained in the gut after 72 h. Additionally, Ce remained in earthworms from the 2000 mg of CeO₂/kg and 5% biochar treatments after depuration for 48 h. Analysis by μ-XANES showed that, within the earthworm tissues, Ce remained predominantly as Ce⁴⁺O₂, with only few regions (2-3 μm²) where it was found in the reduced form (Ce³⁺). The present findings highlight that soil and biochar properties have a significant influence in the internalization of CeO₂ NPs in earthworms; such interactions need to be considered when estimating NP fate and effects in the environment.

Environmental Transformations and Algal Toxicity of Single-Layer Molybdenum Disulfide Regulated by Humic Acid

The environmental transformations of nanomaterials are correlated with their behaviors and ecological risks. The applications of single-layer molybdenum disulfide (SLMoS₂) have rapidly developed in environmental fields, but the potential transformations and biological effects of SLMoS₂ remain largely unknown. This study revealed that humic acid (HA, over 10 mg/L) induced the scrolling of SLMoS₂ with light irradiation over a 56-day incubation. The colloidal stability of SLMoS₂ increased, and the aggregation ratio decreased from 0.59 ± 0.07 to 0.08 ± 0.01 nm/min after HA hybridization. Besides, compared with pristine SLMoS₂, the chemical dissolution rate of SLMoS₂ was up to 4.6-fold faster with HA exposure. These results demonstrate that HA affects the environmental fate and transformations of SLMoS₂. SLMoS₂-HA possessed a significantly widened direct band gap (2.06 eV) compared with that of SLMoS₂ (1.8 eV). SLMoS₂ acted as an electronic acceptor from HA, resulting in the separation of electron-hole pairs. Consequently, SLMoS₂-HA exhibited stronger peroxidase-like catalytic activity, which was approximately 2-fold higher than that of SLMoS₂. Moreover, the morphology and layered structure of SLMoS₂ changed, and the damage SLMoS₂ inflicted on microalgae was significantly reduced. This work provides insights into the behaviors and related biological risks of SLMoS₂ in aqueous environments.

Synthesis and biomedical applications of Cerium oxide nanoparticles - A Review

A cerium oxide nanoparticles (nanoceria) has a wide range of applications in different fields, especially biomedical division. As a matter of concern, it has a major impact on the human health and environment. The aim of this review is to address the different ways of synthesis of nanoceria using chemical and green synthesis methods and characterization and the applications of nanoceria for antioxidant, anticancer, antibacterial activities and toxicological studies including the most recent studies carried out in vivo and in vitro to study the problems. We have exclusively discussed on the toxicology of nanoceria exposed to the general public along with recent advances in the studies of antimicrobial, toxicity and anti-oxidant activity.

Solar Photothermal Disinfection using Broadband-Light Absorbing Gold Nanoparticles and Carbon Black

A simple heat treatment, perhaps the most globally recognized point-of-use water sterilization method, is seemingly effective against all major pathogens of concern, but bulk water boiling is not energy efficient or sustainable. Herein, we present the first application of solar-to-thermal converting nanomaterials for the direct inactivation of bacteria and viruses in drinking water through the application of Au nanorods, carbon black, and Au nanorod-carbon black composite materials as light absorbers. With broad absorption bands spanning the visible and near-infrared wavelengths, at sufficient concentrations, these nanoparticles induce multiple scattering events, increasing photon absorption probability and concentrating the light within a small spatial domain, leading to localized, intense heating that inactivates microorganisms in close proximity. Moving toward practical device design, we have developed a facile silane immobilization approach to fabricate films with densely packed layers of photothermal nanomaterials. Our results suggest that upon irraditaion with simulated solar light, these films can thermally inactivate bacteria and viruses, as demonstrated through the inactivation of surrogate organisms Escherichia coli K-12, and bacteriophages MS2 and PR772.