Impact of engineered nanomaterials on rice (Oryza sativa L.): A critical review of current knowledge

After use, a large number of engineered materials (ENMs) are directly or indirectly released into the environment. This may threaten the agricultural ecosystem, especially with crops under high demand for irrigation water, such as rice (Oryza sativa L.), a crop that feeds nearly half of the world's population. However, consistent and detailed information on the effects of nanoparticles in rice is limited. This review is a systematic exploration of the effects of ENMs on rice, with a critical evaluation of the mechanisms reported in the literature by which different nanomaterials cause toxicity in rice. The physiological and biochemical effects engendered by the nanoparticles are highlighted, focusing on rice growth and development, ENMs uptake and translocation, gene expression changes, enzyme activity modifications, and secondary metabolite alterations.

Copper oxide (CuO) nanoparticles affect yield, nutritional quality, and auxin associated gene expression in weedy and cultivated rice (Oryza sativa L.) grains

Weedy rice grows competitively with cultivated rice and significantly diminishes rice grain production worldwide. The different effects of Cu-based nanomaterials on the production of weedy and cultivated rice, especially the grain qualities are not known. Grains were collected from weedy and cultivated rice grown for four months in field soil amended with nanoscale CuO (nCuO), bulk CuO (bCuO), and copper sulfate (CuSO₄) at 0, 75, 150, 300, and 600 mg Cu/kg soil. Cu translocation, essential element accumulation, yield, sugar, starch, protein content, and the expression of auxin associated genes in grains were determined. The grains of weedy and cultivated rice were differentially impacted by CuO-based compounds. At ≥300 mg/kg, nCuO and bCuO treated rice had no grain production. Treatment at 75 mg/kg significantly decreased grain yield as compared to control with the order: bCuO (by 88.7%) > CuSO₄ (by 47.2%) ~ nCuO (by 38.3% only in cultivated rice); at the same dose, the Cu grain content was: nCuO ~ CuSO₄ > bCuO > control. In weedy grains, K, Mg, Zn, and Ca contents were decreased by 75 and 150 mg/kg nCuO by up to 47.4%, 34.3%, 37.6%, and 60.0%, but no such decreases were noted in cultivated rice, and Fe content was increased by up to 88.6%, and 53.2%. In rice spikes, nCuO increased Mg, Ca, Fe, and Zn levels by up to 118.1%, 202.6%, 133.8%, and 103.9%, respectively. Nanoscale CuO at 75 and 150 mg/kg upregulated the transcription of an auxin associated gene by 5.22- and 1.38-fold, respectively, in grains of weedy and cultivated rice. The biodistribution of Cu-based compounds in harvested grain was determined by two-photon microscopy. These findings demonstrate a cultivar-specific and concentration-dependent response of rice to nCuO. A potential use of nCuO at 75 and 150 mg/kg in cultivar-dependent delivery system was suggested based on enhanced grain nutritional quality, although the yield was compromised. This knowledge, at the physiological and molecular level, provides valuable information for the future use of Cu-based nanomaterials in sustainable agriculture.

Unified Metallic Catalyst Aging Strategy and Implications for Water Treatment

Heterogeneous catalysis holds great promise for oxidizing or reducing a range of pollutants in water. A well-recognized, but understudied, barrier to implement catalytic treatment centers around fouling or aging over time of the catalyst surfaces. To better understand how to study catalyst fouling or aging, we selected a representative bimetallic catalyst (Pd-In supported on Al2O3), which holds promise to reduce nitrate to innocuous nitrogen gas byproducts upon hydrogen addition, and six model solutions (deionized water, sodium hypochlorite, sodium borohydride, acetic acid, sodium sulfide, and tap water). Our novel aging experimental apparatus permitted single passage of each model solution, separately, through a small packed-bed reactor containing replicate bimetallic catalyst "beds" that could be sacrificed weekly for off-line characterization to quantify impacts of fouling or aging. The composition of the model solutions led to the following gradual changes in surface composition, morphology, or catalytic reactivity: (i) formation of passivating species, (ii) decreased catalytic sites due to metal leaching under acid conditions or sulfide poisoning, (iii) dissolution and/or transformation of indium, (iv) formation of new catalytic sites by the introduction of an additional metallic element, and (v) oxidative etching. The model solution water chemistry captured a wide range of conditions likely to be encountered in potable or industrial water treatment. Aging-induced changes altered catalytic activity and provided insights into potential strategies to improve long-term catalyst operations for water treatment.

Influence of Single and Combined Mixtures of Metal Oxide Nanoparticles on Eggplant Growth, Yield, and Verticillium Wilt Severity

Verticillium wilt, caused by Verticillium dahliae, is one of the major diseases of eggplants. Nanoparticles (NPs) of CuO, Mn₂O₃, and ZnO were sprayed alone onto leaves of young eggplants and in different combinations and rates, and then seedlings were transplanted into soil infested with V. dahliae in the greenhouse and field between 2015 and 2018. All combinations of NPs were consistently less effective than CuO NPs applied alone at 500 µg/ml at increasing disease suppression, biomass, and fruit yield. CuO NPs were associated with an increase in fruit yield (17 and 33% increase) and disease suppression (28 and 22% reduction) in 2016 and 2017, respectively, when compared with untreated controls. However, this effect was negated in the greenhouse and field experiments when CuO NPs were combined with Mn₂O₃. Combining NPs of CuO with ZnO resulted in variable effects; amendments increased growth and suppressed disease in greenhouse experiments, but results were mixed in the field. Leaf tissue analyses from the greenhouse experiments showed that Cu concentration in leaves was reduced when CuO NPs were combined with other NPs, even when application rates were the same amount. A simple competition for entry sites may explain why combinations of CuO NPs and Mn₂O₃ NPs reduced efficacy but does not explain the lack of inhibition between Cu and Zn. NPs of CuO performed better than their larger bulk equivalent, and studies on application rate found 500 µg/ml was optimal. No phytotoxicity, as determined, by leaf burning, necrotic spots, or dead apical buds was noted even at the highest combined rates of 1,500 µg/ml.

Influence of Single and Combined Mixtures of Metal Oxide Nanoparticles on Eggplant Growth, Yield, and Verticillium Wilt Severity

Verticillium wilt, caused by Verticillium dahliae, is one of the major diseases of eggplants. Nanoparticles (NPs) of CuO, Mn₂O₃, and ZnO were sprayed alone onto leaves of young eggplants and in different combinations and rates, and then seedlings were transplanted into soil infested with V. dahliae in the greenhouse and field between 2015 and 2018. All combinations of NPs were consistently less effective than CuO NPs applied alone at 500 µg/ml at increasing disease suppression, biomass, and fruit yield. CuO NPs were associated with an increase in fruit yield (17 and 33% increase) and disease suppression (28 and 22% reduction) in 2016 and 2017, respectively, when compared with untreated controls. However, this effect was negated in the greenhouse and field experiments when CuO NPs were combined with Mn₂O₃. Combining NPs of CuO with ZnO resulted in variable effects; amendments increased growth and suppressed disease in greenhouse experiments, but results were mixed in the field. Leaf tissue analyses from the greenhouse experiments showed that Cu concentration in leaves was reduced when CuO NPs were combined with other NPs, even when application rates were the same amount. A simple competition for entry sites may explain why combinations of CuO NPs and Mn₂O₃ NPs reduced efficacy but does not explain the lack of inhibition between Cu and Zn. NPs of CuO performed better than their larger bulk equivalent, and studies on application rate found 500 µg/ml was optimal. No phytotoxicity, as determined, by leaf burning, necrotic spots, or dead apical buds was noted even at the highest combined rates of 1,500 µg/ml.

Bok choy (Brassica rapa) grown in copper oxide nanoparticles-amended soils exhibits toxicity in a phenotype-dependent manner: Translocation, biodistribution and nutritional disturbance

The comparative toxicity of nano/bulk cupric oxide (CuO) and ionic copper (Cu) in Rosie and Green bok choy (Brassica rapa) varieties, with higher and lower anthocyanin contents, respectively, was investigated. Both phenotypes were cultivated for 70 days in natural soil amended with nano CuO (nCuO), bulk CuO (bCuO), and Cu chloride (CuCl₂) at 75, 150, 300, and 600 mg Cu/kg soil. Essential elements in tissues, agronomical parameters, chlorophyll content, and Cu distribution in leaf were determined. In both varieties, nCuO treatments significantly increased Cu uptake in roots, compared with bCuO and CuCl₂ (p ≤ 0.05). At all treatment concentrations, Rosie variety had more Cu than Green. More physiological impairments such as chlorophyll and leaf biomass reduction were observed in treated-Rosie varieties, compared to Green plants. The adverse effects were higher in nCuO-treated plants than their bCuO- or ionic Cu-exposed counterparts. Different distribution patterns of the translocated Cu in leaf midrib and parenchyma depended on particle size and plant phenotype, as demonstrated by two-photon microscopy. The different effects of CuO-based compounds in Rosie and Green varieties may be related to the anthocyanin content. These findings help to understand the factors involved in nanoparticles uptake and translocation to plant edible parts.

Seed Biofortification by Engineered Nanomaterials: A Pathway To Alleviate Malnutrition?

Micronutrient deficiencies in global food chains are a significant cause of ill health around the world, particularly in developing countries. Agriculture is the primary source of nutrients required for sound health, and as the population has continued to grow, the agricultural sector has come under pressure to improve crop production, in terms of both quantity and quality, to meet the global demands for food security. The use of engineered nanomaterial (ENM) has emerged as a promising technology to sustainably improve the efficiency of current agricultural practices as well as overall crop productivity. One promising approach that has begun to receive attention is to use ENM as seed treatments to biofortify agricultural crop production and quality. This review highlights the current state of the science for this approach as well as critical knowledge gaps and research needs that must be overcome to optimize the sustainable application of nano-enabled seed fortification approaches.

Superparamagnetic MOF@GO Ni and Co based hybrid nanocomposites as efficient water pollutant adsorbents

A series of highly efficient adsorbents were developed using Ni₃(BTC)₂ and Co₃(BTC)₂ metal-organic frameworks (MOFs) and Fe₃O₄ magnetic nanoparticles (MNPs) to functionalize graphene oxide (GO). XRD results show high crystallinity of the prepared nanomaterials and the successful decoration of Ni₃(BTC)₂ and Co₃(BTC)₂ MOFs over the GO substrate (BTC = benzene-1,3,5-tricarboxylic acid). SEM and TEM imaging show the successful formation of nanoscale MOFs and Fe₃O₄ MNPs over GO. IR spectroscopy supports the characterization and successful preparation of the Fe₃O₄/MOF@GO hybrid composite nanoadsorbents. The prepared composite nanoadsorbents were used to sorb Methylene Blue (MB) as a model for common organic pollutants in water and common ions (Na⁺, Ca²⁺, Mg²⁺, SO₄^2-, SiO₃^2-) from a brackish water model. The adsorbed concentration at equilibrium of MB of the prepared composite nanoadsorbents increases by an average of 30.52 and 13.75 mg/g for the Co and Ni composite, respectively, when compared to the MOFs parent materials. The adsorbed amount of sulfate ions increases by 92.1 mg/g for the Co composite and 112.1 mg/g for the Ni composite, when compared to graphene oxide. This adsorption enhancement is attributed to suppressed aggregation through increased dispersive forces in the MOFs due to the presence of GO, formation of nanoscale MOFs over the GO platform, and the hindering of stacking of the graphene layers by the MOFs. Leaching tests show that the release of Co and Ni ions to water is reduced from 105.2 and 220 mg/L, respectively, in the parent MOF materials to 0.5 and 16.4 mg/L, respectively, in the composite nanoadsorbents. These findings show that the newly developed composite nanoadsorbents can sorb organic pollutants, and target sulfate and silicate anions, which makes them suitable candidates for water and wastewater treatments.

Long-term assessment of nano and bulk copper compound exposure in sugarcane (Saccharum officinarum)

As interest in the use of copper-based nanomaterials in agriculture continue to increase, research into their exposure effects must expand from short-term, high exposure studies to long-term studies at realistic concentrations. Long-term studies can better elucidate the implications of copper nanomaterial exposure by allowing plants to mature and adapt to higher copper concentrations. In this study, sugarcane plants were grown to maturity in large nursery pots using soils amended with one of the following treatments: Kocide 3000 (Cu(OH)₂), a nano-sized CuO (nCuO), a bulk-sized CuO (bCuO), copper metal nanoparticles (Cu NP), or CuCl₂ at 20, 40, and 60 mg kg^-1. After tissue harvesting, copper content in plant tissues, including pressed cane juice, were determined. Chlorophyll content and the activity of reactive oxygen species (ROS) related enzymes, in root tissues, were measured as an indicator of plant health. Elemental analysis revealed significant changes in root copper concentrations only upon application of the highest levels of Kocide 3000, nCuO, and Cu NP. However, translocation of copper to leaf tissues displayed consistent increases with added copper over controls. Plants treated with Kocide 3000 at 60 mg kg^-1 experienced a significant 31% decrease in cane juice yield; copper concentrations in the pressed juice of plants treated with: Kocide 3000 at 20 and 60 mg kg^-1, nCuO at 20 and 60 mg kg^-1, bCuO at 20 mg kg^-1, CuCl₂ at 40 mg kg^-1, and Cu NP increased by at least 58%. Chlorophyll content remained comparable to controls, and there was a significant 50 to 68% decrease in superoxide dismutase (SOD) activity in plants treated with nCuO, bCuO, Cu NP, and CuCl₂. The results indicate that sugarcane plants exposed to the selected copper-based treatments were not adversely affected.

Development of photocatalytic paint based on TiO2 and photopolymer resin for the degradation of organic pollutants in water

While the use of TiO2 nanoparticles in the form of slurry/suspension requires energy-intensive separation processes, its immobilization in solid support may open new opportunities in the area of sustainable water treatment technologies. In this study, a novel method for the development of photocatalytic paint based on TiO₂ nanoparticles and acrylate-based photopolymer resin is reported. The paint (TiO₂@polymer) was applied on substrates such as plastic petri dish and glass jar, which was polymerized/solidified by ultraviolet light irradiation. The painted petri dish and glass jar were used for the photocatalytic degradation of model organic pollutants viz. methyl orange (MO), methylene blue (MB), and indole in deionized water, simulated fresh drinking water, and tap water matrices. The photocatalytic degradation studies were performed under sunlight and UV-B light were used for. The sunlight-assisted photocatalytic degradation of MO and MB was found to be faster and more efficient than the UV-B light-assisted ones. Under UV-B light irradiation, it took 120 min to degrade about 80% of 6 ppm MB solution, whereas under sunlight irradiation it took 60 min to degrade about 90% of the same MB solution. The photocatalytic paint generated hydroxyl radical (·OH) under the UV-B and sunlight irradiation, which was studied by the terephthalic acid fluorescence tests. Further, the potential release of TiO₂ during the exposure to UV irradiation was studied by single particle ICP-MS analysis.

Biochemical and physiological effects of copper compounds/nanoparticles on sugarcane (Saccharum officinarum)

The widespread use of copper based nanomaterials has been accompanied by an increasing interest in understanding their potential risks. It is essential to understand the effects of these nanoparticles on edible crops by performing long-term experiments at relevant exposure concentrations. Sugarcane is the source of 70% of the world's sugar supply and the widespread use of refined sugar and the consumption of raw sugarcane can provide a route for nanoparticles to enter the food supply. In order to evaluate the biochemical and physiological effects of copper nanoparticle exposure, sugarcane was grown for one year in soil amended with 20, 40, and 60 mg/kg of Kocide 3000 (a copper based fungicide), copper metal nanoparticles, micro-sized CuO, and CuCl₂. The results show that stress indicators such as catalase and ascorbic peroxidase enzymatic activity in the sugarcane plant were activated by all the copper based materials at different concentrations. Sugarcane plants exposed to nearly all copper treatments showed dosage dependent increases in copper concentrations in root tissues. Translocation of copper to aerial tissues was minimal, with copper concentrations not being significantly different from controls. In addition, Chlorophyll A content was higher in plants treated with Kocide 3000 at 20 and 60 mg/kg, μCuO at 20 mg/kg, and CuCl₂ at 20 and 60 mg/kg. To our knowledge, this is the first report on the effects of nano-copper compounds in sugarcane crop.

Low risk posed by engineered and incidental nanoparticles in drinking water

Natural nanoparticles (NNPs) in rivers, lakes, oceans and ground water predate humans, but engineered nanoparticles (ENPs) are emerging as potential pollutants due to increasing regulatory and public perception concerns. This Review contrasts the sources, composition and potential occurrence of NNPs (for example, two-dimensional clays, multifunctional viruses and metal oxides) and ENPs in surface water, after centralized drinking water treatment, and in tap water. While analytical detection challenges exist, ENPs are currently orders of magnitude less common than NNPs in waters that flow into drinking water treatment plants. Because such plants are designed to remove small-sized NNPs, they are also very good at removing ENPs. Consequently, ENP concentrations in tap water are extremely low and pose low risk during ingestion. However, after leaving drinking water treatment plants, corrosion by-products released from distribution pipes or in-home premise plumbing can release incidental nanoparticles into tap water. The occurrence and toxicity of incidental nanoparticles, rather than ENPs, should therefore be the focus of future research.

Bioaccumulation of CeO2 Nanoparticles by Earthworms in Biochar-Amended Soil: A Synchrotron Microspectroscopy Study

The interactions of nanoparticles (NPs) with biochar and soil components may substantially influence NP availability and toxicity to biota. In the present study, earthworms ( Eisenia fetida) were exposed for 28 days to a residential or agricultural soil amended with 0-2000 mg of CeO₂ NP/kg and with biochar (produced by the pyrolysis of pecan shells at 350 and 600 °C) at various application rates [0-5% (w/w)]. After 28 days, earthworms were depurated and analyzed for Ce content, moisture content, and lipid peroxidation. The results showed minimal toxicity to the worms; however, biochar (350 or 600 °C) was the dominant factor, accounting for 94 and 84% of the variance for the moisture content and lipid peroxidation, respectively, in the exposed earthworms. For both soils with 1000 mg of CeO₂/kg at 600 °C, biochar significantly decreased the accumulation of Ce in the worm tissues. Amendment with 350 °C biochar had mixed responses on Ce uptake. Analysis by micro X-ray fluorescence (μ-XRF) and micro X-ray absorption near edge structure (μ-XANES) was used to evaluate Ce localization, speciation, and persistence in CeO₂- and biochar-exposed earthworms after depuration for 12, 48, and 72 h. Earthworms from the 500 mg of CeO₂/kg and 0% biochar treatments eliminated most Ce after a 48 h depuration period. However, in the same treatment and with 5% BC-600 (biochar pyrolysis temperature of 600 °C), ingested biochar fragments (∼50 μm) with Ce adsorbed to the surfaces were retained in the gut after 72 h. Additionally, Ce remained in earthworms from the 2000 mg of CeO₂/kg and 5% biochar treatments after depuration for 48 h. Analysis by μ-XANES showed that, within the earthworm tissues, Ce remained predominantly as Ce⁴⁺O₂, with only few regions (2-3 μm²) where it was found in the reduced form (Ce³⁺). The present findings highlight that soil and biochar properties have a significant influence in the internalization of CeO₂ NPs in earthworms; such interactions need to be considered when estimating NP fate and effects in the environment.

Effect of Metalloid and Metal Oxide Nanoparticles on Fusarium Wilt of Watermelon

This study explored the use of foliar sprays with nanoparticles (NP) of B, CuO, MnO, SiO, TiO, and ZnO to protect watermelon against Fusarium wilt. Leaves of young watermelon plants were sprayed (1 to 2 ml per plant) with NP suspensions (500 to 1,000 µg/ml) and were planted in potting mix infested with Fusarium oxysporum f. sp. niveum. In five of eight greenhouse experiments, CuO NP suppressed disease and, in six of eight experiments, CuO NP increased biomass or yield more than in untreated controls or other tested NP. More root Cu was detected in CuO NP-treated plants than other treatments (P = 0.015). In Griswold, CT, plants treated with CuO NP yielded 39% more fruit than untreated controls. In Hamden, CT, treatment with CuO NP produced 53% more fruit when compared with controls (P = 0.02) and was superior to other Cu fungicides. Gene expression in watermelon roots revealed strong upregulation of polyphenol oxidase (PPO) and PR1 genes when CuO NP and F. oxysporum f. sp. niveum were both present. Enzymatic assays for PPO supported the gene expression results. CuO NP may serve as a highly effective delivery agent for this micronutrient to suppress disease.

Nanoparticle and Ionic Zn Promote Nutrient Loading of Sorghum Grain under Low NPK Fertilization

This study evaluated the effects of ZnO nanoparticles (NP) or Zn salt amendment on sorghum yield, macronutrient use efficiency, and grain Zn-enrichment. Amendments were through soil and foliar pathways, under "low" and "high" levels of nitrogen, phosphorus, and potassium (NPK). In soil and foliar amendments, grain yield was significantly (p ≤ 0.05) increased by both Zn types, albeit insignificantly with soil-applied Zn at low NPK. Across NPK levels and Zn exposure pathways, both Zn types increased N and K accumulation relative to control plants. Compared to N and K, both Zn types had a mixed effect on P accumulation, depending on NPK level and Zn exposure pathway, and permitted greater soil P retention. Both Zn types significantly (p ≤ 0.05) increased grain Zn content, irrespective of exposure pathway. These findings suggest a nanoenabled strategy for enhancing crop productivity, grain nutritional quality, and N use efficiency based on Zn micronutrient amendments, with potential implications for improved human and environmental health.

Considerations of Environmentally Relevant Test Conditions for Improved Evaluation of Ecological Hazards of Engineered Nanomaterials

Engineered nanomaterials (ENMs) are increasingly entering the environment with uncertain consequences including potential ecological effects. Various research communities view differently whether ecotoxicological testing of ENMs should be conducted using environmentally relevant concentrations-where observing outcomes is difficult-versus higher ENM doses, where responses are observable. What exposure conditions are typically used in assessing ENM hazards to populations? What conditions are used to test ecosystem-scale hazards? What is known regarding actual ENMs in the environment, via measurements or modeling simulations? How should exposure conditions, ENM transformation, dose, and body burden be used in interpreting biological and computational findings for assessing risks? These questions were addressed in the context of this critical review. As a result, three main recommendations emerged. First, researchers should improve ecotoxicology of ENMs by choosing test end points, duration, and study conditions-including ENM test concentrations-that align with realistic exposure scenarios. Second, testing should proceed via tiers with iterative feedback that informs experiments at other levels of biological organization. Finally, environmental realism in ENM hazard assessments should involve greater coordination among ENM quantitative analysts, exposure modelers, and ecotoxicologists, across government, industry, and academia.

Aggregation, dissolution, and transformation of copper nanoparticles in natural waters

Time-dependent aggregation, sedimentation, dissolution, and transformation of three copper-based engineered nanomaterials (ENMs) of varied properties were measured in eight natural and artificial waters. Nano-Cu and Cu(OH)2 aggregated rapidly to >10(3) nm while the aggregate size of nano-CuO averaged between 250 and 400 nm. Aggregate size for both nano-Cu and nano-CuO showed a positive correlation with ionic strength with a few exceptions. Aggregate size did not correlate well with sedimentation rate, suggesting sedimentation was influenced by other factors. Controlling factors in sedimentation rates varied by particle: Cu(OH)2 particles remained stable in all waters but groundwater, nano-Cu was generally unstable except in waters with high organic content, and nano-CuO was stabilized by the presence of phosphate, which reversed surface charge polarity at concentrations as low as 0.1 mg PO4(3-) L(-1). Dissolution generally correlated with pH, although in saline waters, dissolved copper formed insoluble complexes. Nano-Cu was rapidly oxidized, resulting in dissolution immediately followed by the formation of precipitates. These results suggest factors including phosphate, carbonate, and ENM oxidation state may be key in determining Cu ENM behavior in natural waters.

Particle-size dependent accumulation and trophic transfer of cerium oxide through a terrestrial food chain

The accumulation and trophic transfer of nanoparticle (NP) or bulk CeO2 through a terrestrial food chain was evaluated. Zucchini (Cucurbita pepo L.) was planted in soil with 0 or 1228 μg/g bulk or NP CeO2. After 28 d, zucchini tissue Ce content was determined by ICP-MS. Leaf tissue from each treatment was used to feed crickets (Acheta domesticus). After 14 d, crickets were analyzed for Ce content or were fed to wolf spiders (family Lycosidae). NP CeO2 significantly suppressed flower mass relative to control and bulk treatments. The Ce content of zucchini was significantly greater when exposure was in the NP form. The flowers, leaves, stems, and roots of zucchini exposed to bulk CeO2 contained 93.3, 707, 331, and 119,000 ng/g, respectively; NP-exposed plants contained 153, 1510, 479, and 567 000 ng/g, respectively. Crickets fed NP CeO2-exposed zucchini leaves contained significantly more Ce (33.6 ng/g) than did control or bulk-exposed insects (15.0-15.2 ng/g). Feces from control, bulk, and NP-exposed crickets contained Ce at 248, 393, and 1010 ng/g, respectively. Spiders that consumed crickets from control or bulk treatments contained nonquantifiable Ce; NP-exposed spiders contained Ce at 5.49 ng/g. These findings show that NP CeO2 accumulates in zucchini at greater levels than equivalent bulk materials and that this greater NP intake results in trophic transfer and possible food chain contamination.

Comprendiendo los mecanismos de hiperacumulación de Cd en S. kali, una planta del desierto

Salsola kali, una planta desértica, ha sido propuesta como un potencial hiperacumulador de Cd. Estudios de espectroscopía de Rayos-X han mostrado que compuestos conteniendo oxígeno y grupos tiol están involucrados en la absorción de Cd en esta planta. Por ello se ha planteado que algunos ácidos orgánicos, pared celular, fitoquelatinas y otros compuestos conteniendo glutatión, pueden estar relacionados con los mecanismos de hiperacumulación de Cd en S. kali. En esta investigación se expusieron plantas silvestres a diferentes concentraciones de Cd para determinar el contenido de este metal en el xilema y floema, así como en fracciones proteínicas. Adicionalmente, extractos de las plantas se analizaron mediante cromatografía líquida a alta presión para identificar y cuantificar ácidos orgánicos. Las plantas se trataron con 0, 20, 200 y 400 mg Cd L-1 por 48 h en hidroponia. La incorporación de Cd se midió por separado en raíces, floema y xilema. Se encontró que en plantas tratadas con concentraciones de Cd por encima de los 200 mg Cd L-1, el contenido de Cd fue mayor en el floema que en el xilema. El perfil proteínico (SDS-PAGE) mostró que en plantas tratadas con Cd se incrementa la presencia de dos péptidos y se expresa uno nuevo. Después de una filtración en gel G25 y codeterminación de Cd, se encontró que es muy probable que dos proteínas (de 29 kDa y 14 kDa) estén asociadas al Cd. El uso de primers degenerados de la familia Brassica permitió la identificación de un posible gen de la fitoquelatin sintasa. Los ácidos cítrico y oxálico fueron identificados en los extractos de las plantas. No se encontraron diferencias significativas entre las concentraciones de ácido cítrico en plantas control y en aquellas tratadas con Cd. Por otro lado, la cantidad de ácido oxálico en plantas expuestas a Cd fue significativamente menor que en las plantas control. Estos datos pueden indicar que el Cd pudo haber precipitado como cristales de oxalato. Los resultados reportados aquí serán útiles para entender a mayor profundidad los mecanismos de hiperacumulación de Cd en S. kali.

Effects of copper sulfate on seedlings of Prosopis pubescens (screwbean mesquite)

Phytoextraction is an established method of removal of heavy metals from contaminated soils worldwide. Phytoextraction is most efficient if local plants are used in the contaminated site. We propose that Prosopis pubescens (Screw bean mesquite) would be a successful phytoextractor of copper in our local soils. In order to determine the feasibility of using Screw bean mesquite, we utilized inductively-coupled plasma-optical emission spectroscopy (ICP-OES) and elemental analysis to observe the uptake of copper and the effects on macro and micro nutrients within laboratory-grown seedlings. We have previously shown that P. pubescens is a hyperaccumulator of copper in soil-grown seedlings. Light and transmission electron microscopy demonstrated death of root cells and ultrastructural changes due to the presence of copper from 50 mg/L - 600 mg/L. Ultrastructural changes included plasmolysis, starch accumulation, increased vacuolation and swollen chloroplasts with disarranged thylakoid membranes in cotyledons. Inductively coupled plasma-optical emission spectroscopy analyses of macro- and micro-nutrients revealed that the presence of copper sulfate in the growth medium of Petri-dish grown Prosopis pubescens seedlings resulted in dramatic decreases of magnesium, potassium and phosphorus. At 500-600 mg/L of copper sulfate, a substantial increase of sulfur was present in roots.

Prosopis pubescens (screw bean mesquite) seedlings are hyperaccumulators of copper

Due to health reasons, toxic metals must be removed from soils contaminated by mine tailings and smelter activities. The phytoremediation potential of Prosopis pubescens (screw bean mesquite) was examined by use of inductively-coupled plasma optical emission spectroscopy. Transmission electron microscopy was used to observe ultrastructural changes of parenchymal cells of leaves in the presence of copper. Elemental analysis was used to localize copper within leaves. A 600-ppm copper sulfate exposure to seedlings for 24 days resulted in 31,000 ppm copper in roots, 17,000 ppm in stems, 11,000 in cotyledons and 20 ppm in the true leaves. For a plant to be considered a hyperaccumulator, the plant must accumulate a leaf-to-root ratio <1. Screw bean mesquite exposed to copper had a leaf-to-root ratio of 0.355 when cotyledons were included. We showed that P. pubescens grown in soil is a hyperaccumulator of copper. We recommend that this plant should be field tested.

Implementation of a multidisciplinary approach to solve complex nano EHS problems by the UC Center for the Environmental Implications of Nanotechnology

UC CEIN was established with funding from the US National Science Foundation and the US Environmental Protection Agency in 2008 with the mission to study the impact of nanotechnology on the environment, including the identification of hazard and exposure scenarios that take into consideration the unique physicochemical properties of engineered nanomaterials (ENMs). Since its inception, the Center has made great progress in assembling a multidisciplinary team to develop the scientific underpinnings, research, knowledge acquisition, education and outreach that is required for assessing the safe implementation of nanotechnology in the environment. In this essay, the development of the infrastructure, protocols, and decision-making tools that are required to effectively integrate complementary scientific disciplines allowing knowledge gathering in a complex study area that goes beyond the traditional safety and risk assessment protocols of the 20th century is outlined. UC CEIN's streamlined approach, premised on predictive hazard and exposure assessment methods, high-throughput discovery platforms and environmental decision-making tools that consider a wide range of nano/bio interfaces in terrestrial and aquatic ecosystems, demonstrates the implementation of a 21st-century approach to the safe implementation of nanotechnology in the environment.

Heavy metal distribution and bioaccumulation in Chihuahuan Desert Rough Harvester ant (Pogonomyrmex rugosus) populations

Heavy metal contamination can negatively impact arid ecosystems; however a thorough examination of bioaccumulation patterns has not been completed. We analyzed the distribution of As, Cd, Cu, Pb and Zn in soils, seeds and ant (Pogonomyrmex rugosus) populations of the Chihuahuan Desert near El Paso, TX, USA. Concentrations of As, Cd, Cu, and Pb in soils, seeds and ants declined as a function of distance from a now inactive Cu and Pb smelter and all five metals bioaccumulated in the granivorous ants. The average bioaccumulation factors for the metals from seeds to ants ranged from 1.04x (As) to 8.12x (Cd). The findings show bioaccumulation trends in linked trophic levels in an arid ecosystem and further investigation should focus on the impacts of heavy metal contamination at the community level.

Evaluación de la exposición a selenio en Los Altos de Jalisco, México

OBJECTIVE

To evaluate the exposure to selenium in drinking water in Los Altos de Jalisco (Jalisco State Heights).

MATERIALS AND METHODS

The concentration of selenium was determined in 125 water wells, and the exposure doses to selenium were estimated for babies, children and adults.

RESULTS

The estimated values of the exposure doses to selenium and total intake of selenium were in the following ranges, respectively: (a) babies: 1.3-6.7 microg/kg/d and 12.6-67.2 microg/d; (b) children: 0.8-4.5 microg/kg/d and 16.8-89.6 microg/d, (c) adults: 0.6-3.0 microg/kg/d and 33.6-179.2 microg/d.

CONCLUSIONS

The estimated exposure levels to selenium were higher than those recommended as optimum by international health organizations, representing a potential health risk. Nevertheless, estimated values are not high enough to produce selenosis.

Using mummichog (Fundulus heteroclitus) arrays to monitor the effectiveness of remediation at a superfund site in Charleston, South Carolina, U.S.A

We previously developed a cDNA array for mummichogs (Fundulus heteroclitus), an estuarine minnow, that is targeted for identifying differentially expressed genes from exposure to polycyclic aromatic hydrocarbons and several metals, including chromium. A chromium-contaminated Superfund site at Shipyard Creek in Charleston, South Carolina, USA, is undergoing remediation, providing us a unique opportunity to study the utility of arrays for monitoring the effectiveness of site remediation. Mummichogs were captured in Shipyard Creek in Charleston prior to remediation (2000) and after remediation began (2003 and 2005). Simultaneously, mummichogs were collected from a reference site at the Winyah Bay National Estuarine Research Reserve (NERR) in Georgetown, South Carolina, USA. The hepatic gene expression pattern of fish captured at Shipyard Creek in 2000 showed wide differences from the fish captured at NERR in 2000. Interestingly, as remediation progressed the gene expression pattern of mummichogs captured at Shipyard Creek became increasingly similar to those captured at NERR. The arrays acted as multidimensional biomarkers as the number of differentially expressed genes dropped from 22 in 2000 to four in 2003, and the magnitude of differential expression dropped from 3.2-fold in 2000 to no gene demonstrating a difference over 1.5-fold in 2003. Furthermore, the arrays indicated changes in the bioavailability of chromium caused by hydraulic dredging in the summer of 2005. This research is, to our knowledge, the first report using arrays as biomarkers for a weight-of-evidence hazard assessment and demonstrates that arrays can be used as multidimensional biomarkers to monitor site mitigation because the gene expression profile is associated with chromium bioavailability and body burden.

Hexavalent chromium reduces larval growth and alters gene expression in mummichog (Fundulus heteroclitus)

Hexavalent chromium [Cr(VI)] is a common bioavailable metal ion that causes oxidative stress, DNA adducts, and perturbs gene expression. Changes in gene expression are useful biomarkers of toxicant exposure that provide information about an organism's health, adaptability, and toxicant-specific effects. Therefore, we developed a cDNA array for the estuarine sentinel species mummichog (Fundulus heteroclitus). Mummichog larvae were exposed to concentrations ranging from 0 to 24 mg/L (462 microM) of Cr(VI) for 30 d, and growth was measured to determine the no-observable-effect concentration (1.5 mg/L) and the lowest-observable-effect concentration (3 mg/L). Body burdens from Cr(VI)-exposed fish showed a dose-dependent increase and were inversely correlated to body weight. Mummichog larvae exposed to Cr(VI) differentially expressed 16 genes in a dose-dependent manner, including GLUT-2, L-FABP, ATPase synthase 8, type II keratin, TBT-binding protein, and complement component C3-2. Many of these genes are involved in energy metabolism or growth, which is consistent with the reduced growth observed. In subsequent experiments, adults were exposed to Cr(VI) for 7 d at 0, 1.5, or 3 mg/L, because adult mummichog are used in monitoring Superfund sites. Hexavalent chromium altered the expression of 10 genes in adult liver, including HGFA, H-FABP, and complement component C3-2. Many of these genes also are involved in energy metabolism. The mummichog arrays provide a potential mechanism for the effects of Cr(VI) on growth. We anticipate using these arrays and the data they provide to monitor effects at polluted sites, to assess the bioavailability of chromium at these sites, and to investigate the efficacy of remediation in chromium-polluted estuaries.

Estimación de la exposición a fluoruros en Los Altos de Jalisco, México

OBJECTIVE

To estimate the level of fluoride exposure and human health risks in Los Altos de Jalisco (Jalisco State Heights) region.

MATERIAL AND METHODS

This study was conducted between May and July 2002. The fluoride concentrations of 105 water wells and six tap water samples were electrochemically measured. Exposure doses to fluoride and total intake of fluoride were estimated for babies (10 kg), children (20 kg), and adults (70 kg).

RESULTS

The fluoride concentration of the water samples ranged from 0.1 to 17.7 mg/l. More than 45% of the water samples exceeded the national guideline value for fluoride of 1.5 mg/l. The estimated values of the exposure doses to fluoride and total intake of fluoride were in the range of 0.04-1.8 mg/kg/d and 0.5-18.4 mg/d, respectively.

CONCLUSIONS

Dental fluorosis, skeletal fluorosis, and bone fractures are some of the potential health risks due to the intake of high doses of fluoride for the population of Los Altos de Jalisco. In order to reduce health risks, fluoridated salt,fluoridated toothpastes, and drinking water containing more than 0.7 mg/l of fluoride should be avoided.

Environmental evaluation of fluoride in drinking water at "Los Altos de Jalisco," in the central Mexico region

Naturally occurring fluoride has been detected and quantified in drinking water in several cities of the "Los Altos de Jalisco" (LAJ) region. LAJ is located in the northeastern part of the state of Jalisco-Mexico, covering an area of 16,410 km2 with a population of 696,318 in 20 municipalities. Drinking water comes mainly from groundwater aquifers, located in the Trans-Mexican Volcanic Belt, which is a volcanic region characterized by hydrothermal activity. Results indicated that water supply from 42% of the municipalities had a fluoride concentration over the Mexican standards of 1.5 mg/L. It is important to notice that there are three cities, Lagos de Moreno (1.66-5.88 mg/L F(-)), Teocaltiche (3.82-18.58 mg/L F(-)), and Encarnación de Díaz (2.58-4.40 mg/L F(-)) where all water samples resulted in fluoride concentration over the maximum contaminant level. The total population from these three cities is over 122,000 inhabitants. Another important city with high levels of fluoride in the water supply was Tepatitlán de Morelos (2 wells with 6.54 and 13.47 mg/L F(-)). In addition to water supply, 30 samples of brand-name bottled water were tested. Surprisingly, 8 samples (27%) demonstrated fluoride level over the standards, mainly Agua de Lagos with 5.27 mg/L. Fluoridated table salt (200-300 mg/kg F(-)) is another important source of fluoride. A large number of people living in the region, mainly school children, might be under adverse health risk because they are consuming contaminated drinking water. It is well known that long-term exposure to water with high levels of fluoride produces severe health problems.

Use of hop (Humulus lupulus) agricultural by-products for the reduction of aqueous lead(II) environmental health hazards

The agricultural by-products of the hop plant (Humulus lupulus L.) were investigated to determine their potential for use in the removal of heavy lead(II) ions from contaminated aqueous solutions. Separate batch laboratory experiments were performed to establish the optimal binding pH, time exposures, and capacity of the metal adsorption for lead(II) ions by dried and ground hop leaves and stems biomass. Results from these studies have shown a pH dependent binding trend from pH 2-6, with optimum binding occurring around pH 5.0. Time dependency experiments showed a rapid adsorption of lead(II) ions within the first 5 min of contact. Binding capacity experiments demonstrated that 74.2mg of lead(II) were bound per gram of leaf biomass. Similarly overall capacity was seen for the leaves and stems. Desorption of 99% of the bound lead(II) ions was achieved by exposing the metal laden biomass to 0.5M sodium citrate. Further experiments were performed with silica-immobilized hop tissues to determine the lead(II) binding ability under flow conditions. Comparison studies were performed with ion-exchange resins to evaluate the binding ability and to gain further insight into the metal binding mechanism. X-ray absorption spectroscopy experiments were also utilized to gain further insight into the possible lead(II) binding mechanism by the hop plant tissue. Results from these studies indicate that carboxyl ligands are involved in the binding of lead(II) from aqueous solution. These findings show that the use of hop agricultural waste products may be a viable alternative, for the removal and recovery of aqueous lead(II) ions from contaminated waters.

Analysis of temporal and spatial dichotomous PM air samples in the El Paso-Cd. Juarez air quality basin

This paper presents and discusses the results obtained from the gravimetric and chemical analyses of the 24-hr average dichotomous samples collected from five sites in the El Paso-Cd. Juarez air quality basin between August 1999 and March 2000. Gravimetric analysis was performed to determine the temporal and spatial variations of PM2.5 (particulate matter less than 2.5 microm in diameter) and PM25-10 (particulate matter less than 10 pm but greater than 2.5 microm in diameter) mass concentrations. The results indicate that approximately 25% of the PM10 (i.e., PM25 + PM25-10) concentration is composed of PM2.5. Concurrent measurements of hourly PM concentrations and wind speed showed strong diurnal patterns of the regional PM pollution. Results of X-ray fluorescence (XRF) elemental analyses were compared to similar but limited studies performed by the Texas Natural Resource Conservation Commission (TNRCC) in 1990 and 1997. Major elements from geologic sources-Al, Si, Ca, Na, K, Fe, and Ti-accounted for 35% of the total mass concentrations in the PM2.5-10 fraction, indicating that geologic sources in the area are the dominant PM sources. Levels of toxic trace elements, mainly considered as products of anthropogenic activities, have decreased significantly from those observed in 1990 and 1997.

Gas chromatography

This review of the fundamental developments in gas chromatography (GC) includes articles published from 1996 and 1997 and an occasional citation prior to 1996. The literature was reviewed principally using CA Selects for Gas Chromatography from Chemical Abstracts Service, and some significant articles from late 1997 may be missing from the review. In addition, the online SciSearch Database (Institute for Scientific Information) capability was used to abstract review articles or books. As with the prior recent reviews, emphasis has been given to the identification and discussion of selected developments, rather than a presentation of a comprehensive literature search, now available widely through computer-based resources. During the last two years, several themes emerged from a review of the literature. Multidimensional gas chromatography has undergone transformation encompassing a broad range of activity, including attempts to establish methods using chromatographic principles rather than a totally empirical approach. Another trend noted was a comparatively large effort in chromatographic theory through modeling efforts; these presumably became resurgent with inexpensive and powerful computing tools. Finally, an impressive level of activity was noted through the themes highlighted in this review, and this was particularly true with detectors and field instruments.