Tough bonding of hydrogels to diverse non-porous surfaces

Nanoscale Surface Chemical Patterning of Soft Polyacrylamide with Elastic Modulus Similar to Soft Tissue

Nanometer-scale control over surface functionalization of soft gels is important for a variety of applications including controlling interactions with cells for in vitro cell culture and for regenerative medicine. Recently, we have shown that it is possible to transfer a nanometer-thick precision functional polymer layer to the surface of relatively stiff polyacrylamide gels. Here, we develop a fundamental understanding of the way in which the precision polymer backbone participates in the polyacrylamide radical polymerization and cross-linking process, which enables us to generate high-efficiency transfer to much softer hydrogels (down to 5 kPa) with stiffness similar to that of soft tissue. This approach creates hydrogel surfaces with exposed nanostructured functional arrays that open the door to controlled ligand presentation on soft hydrogel surfaces.

A novel hydrogel composite of chitosan-phytic acid complex with PAAm: Characterization and adsorptive properties for UO22+and methylene blue

The composite of a polyelectrolyte combination of chitosan and phytic acid (CsPa) and its entrapped form in polyacrylamide (PAAmCsPa) were synthesized. The composites were characterized by a number of methods including ATR-FTIR, SEM-EDX, XRD and XPS. The adsorptive properties of CsPa and PAAmCsPa were analyzed and modelled for UO22+ and methylene blue (MB+). The results showed that the composites exhibited physico-chemical properties that were both inherited from the components as well as unique to them. The isotherms of UO22+ and MB+ were L-type Giles isotherms. The adsorption kinetics followed the pseudo-second-order model, in contrast to the Langmuir model, which predicts first-order kinetics for both species. According to the Weber-Morris model, the nature of the adsorption process was ion exchange and/or complex formation for both composites and ions. The thermodynamics showed that the adsorption process was endothermic (ΔH > 0), with increasing entropy (ΔS > 0) and spontaneous (ΔG < 0). The reusability tests of the composites for UO22+ adsorption showed that the composites were substantially reusable for 6 cycles. The composites were selective for UO22+ over MB+ ions, and UO22+ adsorption increased significantly when MB+ adsorbed composites were used. Reproducible measurements demonstrating the storability of the composites were obtained over a period of approximately one year.

Sodium alginate-based high conductive, ultra-stretchable hydrogel fibers for electrolytes of flexible solid-state supercapacitors

The flexibility and safety of energy storage systems are crucial, and hydrogels as one of the most promising candidates for solid-state electrolytes. We present a conductive hydrogel based on sodium alginate that exhibits ultra-stretchable (4200 %) and high conductivity (16.3 S m-1). The mechanical properties of the conductive hydrogel are achieved by optimizing the topology of the sodium alginate and harnessing the synergistic effect of non-covalent interaction among different components. And a conductive structure within hydrogels was successfully established through the synergistic combination of ion and metal nanoparticles. The flexible supercapacitor (FSC) with conductive hydrogel as solid electrolytes demonstrated an area-specific capacitance of up to 274.28 mF cm-2 at a current density of 1 mA cm-2. And the energy density of the FSC is as high as 187 μWh cm-2 at a power density of 1.2 mW cm-2. The voltage range of the FSC is also extended to 1.4 V. The FSC also exhibited exceptional flexibility and stability, including insensitivity to bending angles and remarkable cycle durability (82.4 % after 10,000 cycles). The study presents a novel design for the development of solid-state electrolytes, with the aim of creating a new generation of FSC that exhibit superior safety and high energy density.

Research on the osteogenic properties of 3D-printed porous titanium alloy scaffolds loaded with Gelma/PAAM-ZOL composite hydrogels

Although titanium alloy is the most widely used endoplant material in orthopedics, the material is bioinert and good bone integration is difficult to achieve. Zoledronic acid (ZOL) has been shown to locally inhibit osteoclast formation and prevent osteoporosis, but excessive concentrations of ZOL exert an inhibitory effect on osteoblasts; therefore, stable and controlled local release of ZOL may reshape bone balance and promote bone regeneration. To promote the adhesion of osteoblasts to many polar groups, researchers have applied gelatine methacryloyl (Gelma) combined with polyacrylamide hydrogel (PAAM), which significantly increased the hydrogen bonding force between the samples and improved the stability of the coating and drug release. A series of experiments demonstrated that the Gelma/PAAM-ZOL bioactive coating on the surface of the titanium alloy was successfully prepared. The coating can induce osteoclast apoptosis, promote osteoblast proliferation and differentiation, achieve dual regulation of bone regeneration, successfully disrupt the balance of bone remodelling and promote bone tissue regeneration. Additionally, the coating improves the metal biological inertness on the surface of titanium alloys and improves the bone integration of the scaffold, offering a new strategy for bone tissue engineering to promote bone technology.

Multifunctional Conductive Hydrogel Interface for Bioelectronic Recording and Stimulation

The past few decades have witnessed the rapid advancement and broad applications of flexible bioelectronics, in wearable and implantable electronics, brain-computer interfaces, neural science and technology, clinical diagnosis, treatment, etc. It is noteworthy that soft and elastic conductive hydrogels, owing to their multiple similarities with biological tissues in terms of mechanics, electronics, water-rich, and biological functions, have successfully bridged the gap between rigid electronics and soft biology. Multifunctional hydrogel bioelectronics, emerging as a new generation of promising material candidates, have authentically established highly compatible and reliable, high-quality bioelectronic interfaces, particularly in bioelectronic recording and stimulation. This review summarizes the material basis and design principles involved in constructing hydrogel bioelectronic interfaces, and systematically discusses the fundamental mechanism and unique advantages in bioelectrical interfacing with the biological surface. Furthermore, an overview of the state-of-the-art manufacturing strategies for hydrogel bioelectronic interfaces with enhanced biocompatibility and integration with the biological system is presented. This review finally exemplifies the unprecedented advancement and impetus toward bioelectronic recording and stimulation, especially in implantable and integrated hydrogel bioelectronic systems, and concludes with a perspective expectation for hydrogel bioelectronics in clinical and biomedical applications.

Mechanochemistry: Fundamental Principles and Applications

Mechanochemistry is an emerging research field at the interface of physics, mechanics, materials science, and chemistry. Complementary to traditional activation methods in chemistry, such as heat, electricity, and light, mechanochemistry focuses on the activation of chemical reactions by directly or indirectly applying mechanical forces. It has evolved as a powerful tool for controlling chemical reactions in solid state systems, sensing and responding to stresses in polymer materials, regulating interfacial adhesions, and stimulating biological processes. By combining theoretical approaches, simulations and experimental techniques, researchers have gained intricate insights into the mechanisms underlying mechanochemistry. In this review, the physical chemistry principles underpinning mechanochemistry are elucidated and a comprehensive overview of recent significant achievements in the discovery of mechanically responsive chemical processes is provided, with a particular emphasis on their applications in materials science. Additionally, The perspectives and insights into potential future directions for this exciting research field are offered.

Versatile ionic liquid gels formed by dynamic covalent bonding and microphase separated structures

It is challenging for ionic liquid gels to achieve the combination of rapid self-healing with high toughness. Here, ionic liquid gels (DI-PR) were prepared from readily available materials. A dynamic covalently bonded oxime-carbamate was prepared from polycaprolactone diol, isophorone diisocyanate and dimethylethyleneglyoxime, followed by addition of the "rigid-flexible" cross-linking agent rutin to chemically cross-link the polymer chains and afford the ionic liquid gels, DI-PR. The tensile strength, elongation at break and toughness of the DI-PR gels were as high as 16.5 MPa, 1132.6%, and 52.6 MJ m-3, respectively. The toughness is similar to that of natural silkworm silk (70 MJ m-3) and wool (60 MJ m-3). After stretching, the DI-PR can rebound within 1 s, their room temperature self-healing rate is as high as 92%, they remain functional over the temperature range -50 °C to 140 °C and the interface with a steel plate has an adhesion toughness of >2000 J m-2. These properties mean that the DI-PR gels are particularly suitable for use as anticorrosion coatings for submarine and underground gas and oil pipelines. The use of rutin, which combines rigid quercetin-based structural units with flexible glycoside-based structural units, as a cross-linking agent, provides a new method for improving the toughness of soft materials through its synergistic interaction with hard and soft chain fragments of polyurethanes.

Injectable Dual Fenton/Enzymatically Cross-Linked Double-Network Hydrogels Based on Acrylic/Phenolic Polymers with Highly Reinforced and Tunable Mechanical Properties

Injectable hydrogels have been extensively used as promising therapeutic scaffolds for a wide range of biomedical applications, such as tissue regeneration and drug delivery. However, their low fracture toughness and brittleness often limit their scope of application. Double-network (DN) hydrogel, which is composed of independently cross-linked rigid and ductile polymer networks, has been proposed as an alternative technique to compensate for the weak mechanical properties of hydrogels. Nevertheless, some challenges still remain, such as the complicated and time-consuming process for DN formation, and the difficulty in controlling the mechanical properties of DN hydrogels. In this study, we introduce a simple, rapid, and controllable method to prepare in situ cross-linkable injectable DN hydrogels composed of acrylamide (AAm) and 4-arm-PPO-PEO-tyramine (TTA) via dual Fenton- and enzyme-mediated reactions. By varying the concentration of Fenton's reagent, the DN hydrogels were rapidly formed with controllable gelation rate. Importantly, the DN hydrogels showed a 13-fold increase in compressive strength and a 14-fold increase in tensile strength, compared to the single network hydrogels. The mechanical properties, elasticity, and plasticity of DN hydrogels could also be modulated by simply varying the preparation conditions, including the cross-linking density and reagent concentrations. At low cross-linker concentration (<0.05 wt %), the plastic DN hydrogel stretched to over 6,500%, whereas high cross-linker concentration (≥0.05 wt %) induced fully elastic hydrogels, without hysteresis. Besides, DN hydrogels were endowed with rapid self-recovery and highly enhanced adhesion, which can be further applied to wearable devices. Moreover, human dermal fibroblasts treated with DN hydrogels retained viability, demonstrating the biocompatibility of the cross-linking system. Therefore, we expect that the dual Fenton-/enzyme-mediated cross-linkable DN hydrogels offer great potential as advanced biomaterials applied for hard tissue regeneration and replacement.

A Pressure-Sensitive, Repositionable Bioadhesive for Instant, Atraumatic Surgical Application on Internal Organs

Pressure-sensitive adhesives are widely utilized due to their instant and reversible adhesion to various dry substrates. Though offering intuitive and robust attachment of medical devices on skin, currently available clinical pressure-sensitive adhesives do not attach to internal organs, mainly due to the presence of interfacial water on the tissue surface that acts as a barrier to adhesion. In this work, a pressure-sensitive, repositionable bioadhesive (PSB) that adheres to internal organs by synergistically combining the characteristic viscoelastic properties of pressure-sensitive adhesives and the interfacial behavior of hydrogel bioadhesives, is introduced. Composed of a viscoelastic copolymer, the PSB absorbs interfacial water to enable instant adhesion on wet internal organs, such as the heart and lungs, and removal after use without causing any tissue damage. The PSB's capabilities in diverse on-demand surgical and analytical scenarios including tissue stabilization of soft organs and the integration of bioelectronic devices in rat and porcine models, are demonstrated.

Nature-inspired adhesive systems

Many organisms in nature thrive in intricate habitats through their unique bio-adhesive surfaces, facilitating tasks such as capturing prey and reproduction. It's important to note that the remarkable adhesion properties found in these natural biological surfaces primarily arise from their distinct micro- and nanostructures and/or chemical compositions. To create artificial surfaces with superior adhesion capabilities, researchers delve deeper into the underlying mechanisms of these captivating adhesion phenomena to draw inspiration. This article provides a systematic overview of various biological surfaces with different adhesion mechanisms, focusing on surface micro- and nanostructures and/or chemistry, offering design principles for their artificial counterparts. Here, the basic interactions and adhesion models of natural biological surfaces are introduced first. This will be followed by an exploration of research advancements in natural and artificial adhesive surfaces including both dry adhesive surfaces and wet/underwater adhesive surfaces, along with relevant adhesion characterization techniques. Special attention is paid to stimulus-responsive smart artificial adhesive surfaces with tunable adhesive properties. The goal is to spotlight recent advancements, identify common themes, and explore fundamental distinctions to pinpoint the present challenges and prospects in this field.

Composite Hydrogel Sealants for Annulus Fibrosus Repair

Intervertebral disc (IVD) herniation is a leading cause of disability and lower back pain, causing enormous socioeconomic burdens. The standard of care for disc herniation is nucleotomy, which alleviates pain but does not repair the annulus fibrosus (AF) defect nor recover the biomechanical function of the disc. Existing bioadhesives for AF repair are limited by insufficient adhesion and significant mechanical and geometrical mismatch with the AF tissue, resulting in the recurrence of protrusion or detachment of bioadhesives. Here, we report a composite hydrogel sealant constructed from a composite of a three-dimensional (3D)-printed thermoplastic polyurethane (TPU) mesh and tough hydrogel. We tailored the fiber angle and volume fraction of the TPU mesh design to match the angle-ply structure and mechanical properties of native AF. Also, we proposed and tested three types of geometrical design of the composite hydrogel sealant to match the defect shape and size. Our results show that the sealant could mimic native AF in terms of the elastic modulus, flexural modulus, and fracture toughness and form strong adhesion with the human AF tissue. The bovine IVD tests show the effectiveness of the composite hydrogel sealant for AF repair and biomechanics recovery and for preventing herniation with its heightened stiffness and superior adhesion. By harnessing the combined capabilities of 3D printing and bioadhesives, these composite hydrogel sealants demonstrate promising potential for diverse applications in tissue repair and regeneration.

Additive manufacturing of highly entangled polymer networks

Incorporation of polymer chain entanglements within a single network can synergistically improve stiffness and toughness, yet attaining such dense entanglements through vat photopolymerization additive manufacturing [e.g., digital light processing (DLP)] remains elusive. We report a facile strategy that combines light and dark polymerization to allow constituent polymer chains to densely entangle as they form within printed structures. This generalizable approach reaches high monomer conversion at room temperature without the need for additional stimuli, such as light or heat after printing, and enables additive manufacturing of highly entangled hydrogels and elastomers that exhibit fourfold- to sevenfold-higher extension energies in comparison to that of traditional DLP. We used this method to print high-resolution and multimaterial structures with features such as spatially programmed adhesion to wet tissues.

Adhesive Zwitterionic Poly(ionic liquid) with Unprecedented Organic Solvent Resistance

The resistance of adhesives to organic solvents is of paramount importance in diverse industries. Unfortunately, many currently available adhesives exhibit either weak intermolecular chain interactions, resulting in insufficient resistance to organic solvents, or possess a permanent covalent crosslinked network, impeding recyclability. This study introduces an innovative approach to address this challenge by formulating zwitterionic poly(ionic liquid) (ZPIL) derivatives with robust dipole-dipole interactions, incorporating sulfonic anions and imidazolium cations. Due to its unique dynamic and electrostatic self-crosslinking structure, the ZPIL exhibits significant adhesion to various substrates and demonstrates excellent recyclability even after multiple adhesion tests. Significantly, ZPIL exhibits exceptional adhesion stability across diverse nonpolar and polar organic solvents, including ionic liquids, distinguishing itself from nonionic polymers and conventional poly(ionic liquid)s. Its adhesive performance remains minimally affected even after prolonged exposure to soaking conditions. The study presents a promising solution for the design of highly organic solvent-resistant materials for plastics, coatings, and adhesives.

Robust Transient Semi-Glue Tape: Ultrastrong Adhesion Empowered by Water Activation and Self-Locking

In adhesive industry, tapes are renowned for their superior flexibility, repeatability, and ease of storage compared to glues. However, conventional adhesive tapes often suffer from low adhesion strength (<500 kPa). This work introduces an innovative adhesive tape composed of an amphiphilic copolymer and a hydrophobic ionic liquid, achieving an ultrahigh adhesion strength of up to 3.1 MPa on various substrates, making a record-high strength to date for tape-type adhesives. This exceptional adhesion performance is facilitated by water droplets applied at the bonding interface, transforming the adhesive surface into a glue-like property without the need for curing treatments or additional auxiliary equipment. By combining the advantageous features of both glues and tapes, these adhesives are termed as transient semi-glue tapes (TSGT). The mechanism behind such water activation and self-locking process is elucidated, and a general preparation approach is developed. Furthermore, the repeatability and recyclability of TSGT are demonstrated, offering an ingenious solution to this long-standing engineering challenge.

Strong and Thermo-Switchable Gel Adhesion Based on UCST-Type Phase Transition in Deep Eutectic Solvent

It remains a great challenge to achieve strong and reversible hydrogel adhesion. Hydrogel adhesives also suffer from poor environmental stability due to dehydration. To overcome these problems, here reversible adhesive gels are designed using a new switching mechanism and new solvent. For the first time, the study observes UCST (upper critical solution temperature)-type thermosensitive behaviors of poly(benzyl acrylate) (PBnA) polymer and gel in menthol:thymol deep eutectic solvents (DESs). The temperature-induced phase transition allows adjusting cohesive force, and hence adhesion strength of PBnA gels by temperature. To further improve the mechanical and adhesion properties, a peptide crosslinker is used to allow energy dissipation when deforming. The resulting eutectogel exhibits thermal reversible adhesion with a high switching ratio of 14.0. The adhesion strength at attachment state reaches 0.627 MPa, which is much higher than most reversible adhesive hydrogels reported before. The low vapor pressure of DES endows the gel excellent environmental stability. More importantly, the gel can be repeatedly switched between attachment and detachment states. The strong and reversible gel adhesive is successfully used to design soft gripper for the transport of heavy cargos and climbing robot capable of moving on vertical and inverted surface in a manner similar to gecko.

A Near-Infrared Photothermal-Responsive Underwater Adhesive with Tough Adhesion and Antibacterial Properties

Developing tunable underwater adhesives that possess tough adhesion in service and easy detachment when required remains challenging. Herein, a strategy is proposed to design a near infrared (NIR) photothermal-responsive underwater adhesive by incorporating MXene (Ti3C2Tx)-based nanoparticles within isocyanate-modified polydimethylsiloxane (PDMS) polymer chains. The developed adhesive exhibits long-term and tough adhesion with an underwater adhesion strength reaching 5.478 MPa. Such strong adhesion is mainly attributed to the covalent bonds and hydrogen bonds at the adhesive-substrate interface. By making use of the photothermal-response of MXene-based nanoparticles and the thermal response of PDMS-based chains, the adhesive possesses photothermal-responsive performance, exhibiting sharply diminished adhesion under NIR irradiation. Such NIR-triggered tunable adhesion allows for easy and active detachment of the adhesive when needed. Moreover, the underwater adhesive exhibits photothermal antibacterial property, making it highly desirable for underwater applications. This work enhances the understanding of photothermal-responsive underwater adhesion, enabling the design of tunable underwater adhesives for biomedical and engineering applications.

Mechanical-Enhanced and Durable Zwitterionic Hydrogel Coating for Inhibiting Coagulation and Reducing Bacterial Infection

Blood-contact medical devices are indispensable for clinical interventions, yet their susceptibility to thrombosis and bacterial infections poses substantial risks to treatment efficacy and patient well-being. This study introduces a polysulfobetaine/alginate-CuII (SAC) zwitterionic hydrogel coating on polyurethane (PU) surfaces. This approach retains the superhydrophilic and antifouling nature of pSBMA while conferring the antibacterial effects of copper ions. Meanwhile, the copper alginate network intertwines with the polysulfobetaine (pSBMA) network, enhancing its mechanical properties and overcoming inherent weaknesses, thereby improving coating durability. Compared to the substrate, the SAC hydrogel coating significantly reduces thrombus adhesion mass by approximately 81.5% during extracorporeal blood circulation and effectively prevents bacterial biofilm formation even in a high-concentration bacterial milieu over 30 days. Moreover, the results from an isolated blood circulation model in New Zealand white rabbits affirm the impressive anticoagulant efficacy of the SAC hydrogel coating. The findings suggest that this hydrogel coating and its application method hold promise as a solution for blood-contact material surface modification to address thrombosis and bacterial biofilm formation simultaneously.

Cr-Substituted SrCoO3-δ Perovskite with Abundant Oxygen Vacancies for High-Energy and Durable Low-Temperature Antifreezing Flexible Supercapacitor

Developing high-performance electrodes for flexible antifreezing energy storage devices has been a significant challenge with the increasing demand for portable components. In this work, Cr-substituted SrCoO3-δ perovskites were first proposed as potential low-temperature supercapacitor electrode materials. The high-valence Cr6+ ([Ne]3s23p6) substitution favors a high-spin state of Co ions with enhanced electronic repulsion effect, ultimately forming a stable cubic structure with high conductivity. Accordingly, the modification strategies of SrCoO3 through the p6 configuration cation substitution have been improved. As a result, the asymmetric SrCo0.95Cr0.05O3-δ@CC//PPy@CC device exhibited a high energy density of 44.90 Wh kg-1 at 902.01 W kg-1 and maintained a 95.8% specific capacitance after 10,000 cycles, demonstrating an ultralong cyclic stability. The dramatically improved electrochemical performance was attributed to the stabilized crystal structure, increased oxygen vacancy, and accelerated oxygen diffusion rate. Furthermore, a quasi-solid-state supercapacitor with ethylene glycol (EG)-modified KOH/PVA organohydrogel electrolyte was developed through an advance in situ-integrated strategy. After bending at 180° for 1000 cycles, only a 9.7% capacity decay was observed. Even under -40 °C, the supercapacitor has a large energy density of 46.94 μWh cm-2. The present work represents the initial investigation into utilizing perovskite materials for antifreezing energy storage device, thereby confirming their potential application as low-temperature electronic components.

Viscoelastic Adhesive, Super-Conformable, and Semi-Flowable Liquid Metal Eutectogels for High-Fidelity Electrophysiological Monitoring

Integrating gels with human skin through wearables provides unprecedented opportunities for health monitoring technology and artificial intelligence. However, most conductive hydrogels, organogels, and ionogels lack essential environmental stability, biocompatibility, and adhesion for reliable epidermal sensing. In this study, we have developed a liquid metal eutectogel simultaneously possessing superior viscoelasticity, semiflowability, and mechanical rigidity for low interfacial skin impedance, high skin adhesion, and durability. Liquid metal particles (LMPs) are employed to generate free radicals and gallium ions to accelerate the polymerization of acrylic acid monomers in a deep eutectic solvent (DES), obtaining highly viscoelastic polymer networks via physical cross-linking. In particular, graphene oxide (GO) is utilized to encapsulate the LMPs through a sonication-assisted electrostatic assembly to stabilize the LMPs in DES, which also enhances the mechanical toughness and regulates the rheological properties of the eutectogels. Our optimized semi-flowable eutectogel exhibits viscous fluid behavior at low shear rates, facilitating a highly conformable interface with hairy skin. Simultaneously, it demonstrates viscoelastic behavior at high shear rates, allowing for easy peel-off. These distinctive attributes enable the successful applications of on-skin adhesive strain sensing and high-fidelity human electrophysiological (EP) monitoring, showcasing the versatility of these ionically conductive liquid metal eutectogels in advanced personal health monitoring.

Tough Bonding of PVA Hydrogel-on-Textured Titanium Alloy with Varying Texture Densities in Swollen State

Cartilage defects in large joints are a common occurrence in numerous degenerative diseases, especially in osteoarthritis. The hydrogel-on-metal composite has emerged as a potential candidate material, as hydrogels, to some extent, replicate the composition of human articular cartilage consisting of collagen fibers and proteoglycans. However, achieving tough bonding between the hydrogel and titanium alloy remains a significant challenge due to the swelling of the hydrogel in a liquid medium. This swelling results in reduced interfacial toughness between the hydrogel and titanium alloy, limiting its potential clinical applications. Herein, our approach aimed to achieve durable bonding between a hydrogel and a titanium alloy composite in a swollen state by modifying the surface texture of the titanium alloy. Various textures, including circular and triangular patterns, with dimple densities ranging from 10 to 40%, were created on the surface of the titanium alloy. Subsequently, poly(vinyl alcohol) (PVA) hydrogel was deposited onto the textured titanium alloy using a casting-drying method. Our findings revealed that PVA hydrogel on the textured titanium alloy with a 30% texture density exhibited the highest interfacial toughness in the swollen state, measuring at 1300 J m-2 after reaching equilibrium swelling in deionized water, which is a more than 2-fold increase compared to the hydrogel on a smooth substrate. Furthermore, we conducted an analysis of the morphologies of the detached hydrogel from the textured titanium alloy after various swelling durations. The results indicated that interfacial toughness could be enhanced through mechanical interlocking, facilitated by the expanded volume of the hydrogel protrusions as the swelling time increased. Collectively, our study demonstrates the feasibility of achieving tough bonding between a hydrogel and a metal substrate in a liquid environment. This research opens up promising avenues for designing soft/hard heterogeneous materials with strong adhesive properties.

PEG-Based Hydrogel Coatings: Design Tools for Biomedical Applications

Device failure due to undesired biological responses remains a substantial roadblock in the development and translation of new devices into clinical care. Polyethylene glycol (PEG)-based hydrogel coatings can be used to confer antifouling properties to medical devices-enabling minimization of biological responses such as bacterial infection, thrombosis, and foreign body reactions. Application of hydrogel coatings to diverse substrates requires careful consideration of multiple material factors. Herein, we report a systematic investigation of two coating methods: (1) traditional photoinitiated hydrogel coatings; (2) diffusion-mediated, redox-initiated hydrogel coatings. The effects of method, substrate, and compositional variables on the resulting hydrogel coating thickness are presented. To expand the redox-based method to include high molecular weight macromers, a mechanistic investigation of the role of cure rate and macromer viscosity was necessary to balance solution infiltration and gelation. Overall, these structure-property relationships provide users with a toolbox for hydrogel coating design for a broad range of medical devices.

Bioelectronic Neural Interfaces: Improving Neuromodulation Through Organic Conductive Coatings

Integration of bioelectronic devices in clinical practice is expanding rapidly, focusing on conditions ranging from sensory to neurological and mental health disorders. While platinum (Pt) electrodes in neuromodulation devices such as cochlear implants and deep brain stimulators have shown promising results, challenges still affect their long-term performance. Key among these are electrode and device longevity in vivo, and formation of encapsulating fibrous tissue. To overcome these challenges, organic conductors with unique chemical and physical properties are being explored. They hold great promise as coatings for neural interfaces, offering more rapid regulatory pathways and clinical implementation than standalone bioelectronics. This study provides a comprehensive review of the potential benefits of organic coatings in neuromodulation electrodes and the challenges that limit their effective integration into existing devices. It discusses issues related to metallic electrode use and introduces physical, electrical, and biological properties of organic coatings applied in neuromodulation. Furthermore, previously reported challenges related to organic coating stability, durability, manufacturing, and biocompatibility are thoroughly reviewed and proposed coating adhesion mechanisms are summarized. Understanding organic coating properties, modifications, and current challenges of organic coatings in clinical and industrial settings is expected to provide valuable insights for their future development and integration into organic bioelectronics.

Boron nitride microfiber reinforced polyacrylic acid hydrogels with excellent self-adhesion, fast pH response, and strain sensitivity

Hydrogels are widely utilized in the sensor field, but their inadequate adhesion presents a significant obstacle. Herein, a new multifunctional BNMFs/PAA composite hydrogel was prepared via the incorporation of one-dimensional porous boron nitride microfibers (BNMFs) and polyacrylic acid (PAA) hydrogels. BNMFs, as a reinforcing filler, play a very important role in enhancing the properties of the composite hydrogels. In particular, the porous micrometer structure plays a unique role in improving the adhesion properties of PAA hydrogels. The steric hindrance and the rich hydroxyl functional groups coming from BNMFs are key factors for the excellent adhesion of the composite hydrogels. The composite hydrogels show strong adhesion to various substrate materials. For iron plates and biological tissues, the adhesion energy can reach 1377 J m-2 and 317 J m-2, respectively. In addition, the developed BNMFs/PAA composite hydrogels exhibit excellent mechanical properties. The fracture strain of the composite hydrogels is increased by 2.4 times compared to pure PAA hydrogels. The hydrogen bonds formed between BNMFs and PAA are conducive to the mechanical properties of the BNMFs/PAA composite hydrogels. Meanwhile, BNMFs as fillers play a role in carrying and dissipating force. Furthermore, the BNMFs/PAA composite hydrogels have excellent strain and pH response characteristics. This is because the crosslinking network of the composite hydrogels becomes loose after the addition of BNMFs, resulting in rapid ion transport pathways. Therefore, the developed BNMFs/PAA composite hydrogels will have broad application prospects in the fields of motion monitoring, intelligent skin and biological adhesives.

Analysis of the adhesive secreting cells of Arion subfuscus: insights into the role of microgels in a tough, fast-setting hydrogel glue

The slug Arion subfuscus produces a tough, highly adhesive defensive secretion. This secretion is a flexible hydrogel that is toughened by a double network mechanism. While synthetic double network gels typically require extensive time to prepare, this slug creates a tough gel in seconds. To gain insight into how the glue forms a double-network hydrogel so rapidly, the secretory apparatus of this slug was analyzed. The goal was to determine how the major components of the glue were distributed and mixed. Most of the glue comes from two types of large unicellular glands; one secretes polyanionic polysaccharides in small, membrane-bound packets, the other secretes proteins that appear to form a cross-linked network. The latter gland shows distinct regions where cross-linking appears to be occurring. These regions are darker, more homogeneous and appear more solid than the rest of the secretory material. The enzyme catalase is highly abundant in these regions, as are basic proteins. These results suggest that a rapid oxidation event occurs in this protein-containing gland, triggering cross-linking before the glue is released. The cross-linked microgels would then join together after secretion to form a granular hydrogel. The polysaccharide-filled packets would be mixed and interspersed among these microgels and may contribute to joining them together. This is an unexpected and highly effective way to form a tough gel rapidly.

In Situ Structural Densification of Hydrogel Network and Its Interface with Electrodes for High-Performance Multimodal Artificial Skin

The multisensory responsiveness of hydrogels positions them as promising candidates for artificial skin, whereas the mismatch of modulus between soft hydrogels and hard electrodes as well as the poor adhesion and conductance at the interface greatly impairs the stability of electronics devices. Herein, we propose an in situ postprocessing approach utilizing electrochemical reactions between metals (Zn, etc.) and hydrogels to synergistically achieve strong adhesion of the hydrogel-electrode interface, low interfacial impedance, and local strain isolation due to the structural densification of the hydrogel network. The mechanism is that Zn electrochemically oxidizes to Zn2+ and injects into the hydrogel, gradually forming a mechanically interlocked structure, Zn2+-polymer dual-helix structural nodes, and a high-modulus ZnO from the surface to the interior. Compared to untreated samples, the treated sample displays 8.7 times increased interfacial adhesion energy between the hydrogel and electrode (87 J/m2), 95% decreased interfacial impedance (218.8 Ω), and a high-strain isolation efficiency (εtotal/εisolation > 400). Akin to human skin, the prepared sensor demonstrates multimodal sensing capabilities, encompassing highly sensitive strain perception and simultaneous perception of temperature, humidity, and oxygen content unaffected by strain interference. This easy on-chip preparation of hydrogel-based multimodal sensor array shows great potential for health and environment monitoring as artificial skin.

Visual Quantitation of Dopamine-Inspired Fluorescent Adhesion with Orthogonal Phenanthrenequinone Photochemistry

Quantifying adhesion is crucial for understanding adhesion mechanisms and developing advanced dopamine-inspired materials and devices. However, achieving nondestructive and real-time quantitation of adhesion using optical spectra remains challenging. Here, we present a dopamine-inspired orthogonal phenanthrenequinone photochemistry strategy for the one-step adhesion and real-time visual quantitation of fluorescent spectra. This strategy utilizes phenanthrenequinone-mediated photochemistry to facilitate conjoined network formation in the adhesive through simultaneous photoclick cycloaddition and free-radical polymerization. The resulting hydrogel-like adhesive exhibits good mechanical performance, with a Young's modulus of 300 kPa, a toughness of 750 kJ m-3, and a fracture energy of 4500 J m-2. This adhesive, along with polycyclic aromatic phenanthrenequinones, shows strong adhesion (>100 kPa) and interfacial toughness thresholds (250 J m-2) on diverse surfaces─twice to triple as much as typical dopamine-contained adhesives. Importantly, such an adhesive demonstrates excellent fluorescent performance under UV irradiation, closely correlating with its adhesion strengths. Their fluorescence intensities remain constant after continuous stretching/releasing treatment and even in the dried state. Therefore, this dopamine-inspired orthogonal phenanthrenequinone photochemistry is readily available for real-time and nondestructive visual quantitation of adhesion performance under various conditions. Moreover, the adhesive precursor is chemically ultrastable for more than seven months and achieves adhesion on substrates within seconds upon blue light irradiation. As a proof-of-concept, we leverage the rapid and visual quantitation of adhesion and printability to create fluorescent patterns and structures, showcasing applications in information storage, adhesion prediction, and self-reporting properties. This general and straightforward strategy holds promise for rapidly preparing functional adhesive materials and designing high-performance wearable devices.

Rapid, Tough, and Trigger-Detachable Hydrogel Adhesion Enabled by Formation of Nanoparticles In Situ

Integrating hydrogel with other materials is always challenging due to the low mass content of hydrogels and the abundance of water at the interfaces. Adhesion through nanoparticles offers characteristics such as ease of use, reversibility, and universality, but still grapples with challenges like weak bonding. Here, a simple yet powerful strategy using the formation of nanoparticles in situ is reported, establishing strong interfacial adhesion between various hydrogels and substrates including elastomers, plastics, and biological tissue, even under wet conditions. The strong interfacial bonding can be formed in a short time (60 s), and gradually strengthened to 902 J m-2 adhesion energy within an hour. The interfacial layer's construction involves chain entanglement and other non-covalent interactions like coordination and hydrogen bonding. Unlike the permanent bonding seen in most synthetic adhesives, these nanoparticle adhesives can be efficiently triggered for removal by acidic solutions. The simplicity of the precursor diffusion and precipitation process in creating the interfacial layer ensures broad applicability to different substrates and nanoparticle adhesives without compromising robustness. The tough adhesion provided by nanoparticles allows the hydrogel-elastomer hybrid to function as a triboelectric nanogenerator (TENG), facilitating reliable electrical signal generation and output performance due to the robust interface.

A Dynamic Ultrasound Phantom with Tissue-Mimicking Mechanical and Acoustic Properties

Tissue-mimicking phantoms are valuable tools that aid in improving the equipment and training available to medical professionals. However, current phantoms possess limited utility due to their inability to precisely simulate multiple physical properties simultaneously, which is crucial for achieving a system understanding of dynamic human tissues. In this work, novel materials design and fabrication processes to produce various tissue-mimicking materials (TMMs) for skin, adipose, muscle, and soft tissue at a human scale are developed. Target properties (Young's modulus, density, speed of sound, and acoustic attenuation) are first defined for each TMM based on literature. Each TMM recipe is developed, associated mechanical and acoustic properties are characterized, and the TMMs are confirmed to have comparable mechanical and acoustic properties with the corresponding human tissues. Furthermore, a novel sacrificial core to fabricate a hollow, ellipsoid-shaped bladder phantom complete with inlet and outlet tubes, which allow liquids to flow through and expand this phantom, is adopted. This dynamic bladder phantom with realistic mechanical and acoustic properties to human tissues in combination with the developed skin, soft tissue, and subcutaneous adipose tissue TMMs, culminates in a human scale torso tank and electro-mechanical system that can be systematically utilized for characterizing various medical imaging devices.

Structuring and Shaping of Mechanically Robust and Functional Hydrogels toward Wearable and Implantable Applications

Hydrogels possess unique features such as softness, wetness, responsiveness, and biocompatibility, making them highly suitable for biointegrated applications that have close interactions with living organisms. However, conventional man-made hydrogels are usually soft and brittle, making them inferior to the mechanically robust biological hydrogels. To ensure reliable and durable operation of biointegrated wearable and implantable devices, mechanical matching and shape adaptivity of hydrogels to tissues and organs are essential. Recent advances in polymer science and processing technologies have enabled mechanical engineering and shaping of hydrogels for various biointegrated applications. In this review, polymer network structuring strategies at micro/nanoscales for toughening hydrogels are summarized, and representative mechanical functionalities that exist in biological materials but are not easily achieved in synthetic hydrogels are further discussed. Three categories of processing technologies, namely, 3D printing, spinning, and coating for fabrication of tough hydrogel constructs with complex shapes are reviewed, and the corresponding hydrogel toughening strategies are also highlighted. These developments enable adaptive fabrication of mechanically robust and functional hydrogel devices, and promote application of hydrogels in the fields of biomedical engineering, bioelectronics, and soft robotics.

Hydrogel Coatings of Implants for Pathological Bone Repair

Hydrogels are well-suited for biomedical applications due to their numerous advantages, such as excellent bioactivity, versatile physical and chemical properties, and effective drug delivery capabilities. Recently, hydrogel coatings have developed to functionalize bone implants which are biologically inert and cannot withstand the complex bone tissue repair microenvironment. These coatings have shown promise in addressing unique and pressing medical needs. This review begins with the major functionalized performance and interfacial bonding strategy of hydrogel coatings, with a focus on the novel external field response properties of the hydrogel. Recent advances in the fabrication strategies of hydrogel coatings and their use in the treatment of pathologic bone regeneration are highlighted. Finally, challenges and emerging trends in the evolution and application of physiological environment-responsive and external electric field-responsive hydrogel coatings for bone implants are discussed.

Materials and Structural Designs toward Motion Artifact-Free Bioelectronics

Bioelectronics encompassing electronic components and circuits for accessing human information play a vital role in real-time and continuous monitoring of biophysiological signals of electrophysiology, mechanical physiology, and electrochemical physiology. However, mechanical noise, particularly motion artifacts, poses a significant challenge in accurately detecting and analyzing target signals. While software-based "postprocessing" methods and signal filtering techniques have been widely employed, challenges such as signal distortion, major requirement of accurate models for classification, power consumption, and data delay inevitably persist. This review presents an overview of noise reduction strategies in bioelectronics, focusing on reducing motion artifacts and improving the signal-to-noise ratio through hardware-based approaches such as "preprocessing". One of the main stress-avoiding strategies is reducing elastic mechanical energies applied to bioelectronics to prevent stress-induced motion artifacts. Various approaches including strain-compliance, strain-resistance, and stress-damping techniques using unique materials and structures have been explored. Future research should optimize materials and structure designs, establish stable processes and measurement methods, and develop techniques for selectively separating and processing overlapping noises. Ultimately, these advancements will contribute to the development of more reliable and effective bioelectronics for healthcare monitoring and diagnostics.

Silk-based wearable devices for health monitoring and medical treatment

Previous works have focused on enhancing the tensile properties, mechanical flexibility, biocompatibility, and biodegradability of wearable devices for real-time and continuous health management. Silk proteins, including silk fibroin (SF) and sericin, show great advantages in wearable devices due to their natural biodegradability, excellent biocompatibility, and low fabrication cost. Moreover, these silk proteins possess great potential for functionalization and are being explored as promising candidates for multifunctional wearable devices with sensory capabilities and therapeutic purposes. This review introduces current advancements in silk-based constituents used in the assembly of wearable sensors and adhesives for detecting essential physiological indicators, including metabolites in body fluids, body temperature, electrocardiogram (ECG), electromyogram (EMG), pulse, and respiration. SF and sericin play vital roles in addressing issues related to discomfort reduction, signal fidelity improvement, as well as facilitating medical treatment. These developments signify a transition from hospital-centered healthcare toward individual-centered health monitoring and on-demand therapeutic interventions.

Janus hydrogels: merging boundaries in tissue engineering for enhanced biomaterials and regenerative therapies

In recent years, the design and synthesis of Janus hydrogels have witnessed a thriving development, overcoming the limitations of single-performance materials and expanding their potential applications in tissue engineering and regenerative medicine. Janus hydrogels, with their exceptional mechanical properties and excellent biocompatibility, have emerged as promising candidates for various biomedical applications, including tissue engineering and regenerative therapies. In this review, we present the latest progress in the synthesis of Janus hydrogels using commonly employed preparation methods. We elucidate the surface and interface interactions of these hydrogels and discuss the enhanced properties bestowed by the unique "Janus" structure in biomaterials. Additionally, we explore the applications of Janus hydrogels in facilitating regenerative therapies, such as drug delivery, wound healing, tissue engineering, and biosensing. Furthermore, we analyze the challenges and future trends associated with the utilization of Janus hydrogels in biomedical applications.

Innovative Acrylic Resin-Hydrogel Double-Layer Coating: Achieving Dual-Anchoring, Enhanced Adhesion, and Superior Anti-Biofouling Properties for Marine Applications

Traditional anti-corrosion and anti-fouling coatings struggle against the harsh marine environment. Our study tackled this by introducing a novel dual-layer hydrogel (A-H DL) coating system. This system combined a Cu2O-SiO2-acrylic resin primer for anchoring and controlled copper ion release with a dissipative double-network double-anchored hydrogel (DNDAH) boasting superior mechanical strength and anti-biofouling performance. An acrylamide monomer was copolymerized and cross-linked with a coupling agent to form the first irreversible network and first anchoring, providing the DNDAH coating with mechanical strength and structural stability. Alginate gel microspheres (AGMs) grafted with the same coupling agent formed the second reversible network and second anchoring, while coordinating with Cu2+ released from the primer to form a system buffering Cu2+ release, enabling long-term antibacterial protection and self-healing capabilities. FTIR, SEM, TEM, and elemental analyses confirmed the composition, morphology, and copper distribution within the A-H DL coating. A marine simulation experiment demonstrated exceptional stability and anti-fouling efficacy. This unique combination of features makes A-H DL a promising solution for diverse marine applications, from ship hulls to aquaculture equipment.

A grape seed protein-tannic acid powder to transform various non-adhesive hydrogels into adhesive gels

Realizing adhesion between wet materials remains challenging because of the interfacial water. Current strategies depend on complicated surface modifications, resulting in limited functions. Herein, a facile strategy based on the powder of grape seed protein and tannic acid (GSP-TA) was reported to endow various non-adhesive hydrogels adhesion without chemical modifications for both hydrogels and adherents. The GSP-TA powder has the capability to absorb interfacial water, form an adhesive layer on the hydrogel surface, diffusion into the underneath hydrogel matrix, and establish the initial adhesion within 5 s. By forming multiple non-covalent interactions between powders and substrates, the GSP-TA powder served as an efficient surface treating agent, enabling robust adhesion to solid substrates (wood, cardboard, glass, iron, and rubber) and wet tissues (pigskin, muscle, liver and heart). The adhesive strength for wood, cardboard, glass, iron, and rubber was 145.92 ± 5.93, 123.93 ± 15.98, 66.24 ± 7.67, 98.22 ± 4.13, and 80.83 ± 7.48 kPa, respectively. Because of reversible interactions, the adhesion was also repeatable. Due to the merits of grape seed protein and plant polyphenol, it could be completely degraded within 11 days. Bearing several merits, this strategy has promising applications in wound patches, tissue repair, and sensors.

In Situ Polymerization of Hydrogel Electrolyte on Electrodes Enabling the Flexible All-Hydrogel Supercapacitors with Low-Temperature Adaptability

All-hydrogel supercapacitors are emerging as promising power sources for next-generation wearable electronics due to their intrinsic mechanical flexibility, eco-friendliness, and enhanced safety. However, the insufficient interfacial adhesion between the electrode and electrolyte and the frozen hydrogel matrices at subzero temperatures largely limit the practical applications of all-hydrogel supercapacitors. Here, an all-hydrogel supercapacitor is reported with robust interfacial contact and anti-freezing property, fabricated by in situ polymerizing hydrogel electrolyte onto hydrogel electrodes. The robust interfacial adhesion is developed by the synergistic effect of a tough hydrogel matrix and topological entanglements. Meanwhile, the incorporation of zinc chloride (ZnCl2) in the hydrogel electrolyte prevents the freezing of water solvents and endows the all-hydrogel supercapacitor with mechanical flexibility and fatigue resistance across a wide temperature range of 20 °C to -60 °C. Such all-hydrogel supercapacitor demonstrates satisfactory low-temperature electrochemical performance, delivering a high energy density of 11 mWh cm-2 and excellent cycling stability with a capacitance retention of 90% over 10000 cycles at -40 °C. Notably, the fabricated all-hydrogel supercapacitor can endure dynamic deformations and operate well under 2000 tension cycles even at -40 °C, without experiencing delamination and electrochemical failure. This work offers a promising strategy for flexible energy storage devices with low-temperature adaptability.

Anisotropic Liesegang pattern for the nonlinear elastic biomineral-hydrogel complex

The Liesegang pattern is a beautiful natural anisotropic patterning phenomenon observed in rocks and sandstones. This study reveals that the Liesegang pattern can induce nonlinear elasticity. Here, a Liesegang-patterned complex with biomineral-hydrogel repetitive layers is prepared. This Liesegang-patterned complex is obtained only when the biomineralization is performed under the supersaturated conditions. The Liesegang-patterned complex features a nonlinear elastic response, whereas a complex with a single biomineral shell shows a linear behavior, thus demonstrating that the Liesegang pattern is essential in achieving nonlinear elasticity. The stiff biomineral layers have buffered the concentrated energy on behalf of soft hydrogels, thereby exposing the hydrogel components to reduced stress and, in turn, enabling them to perform the elasticity continuously. Moreover, the nonlinear elastic Liesegang-patterned complex exhibits excellent stress relaxation to the external loading, which is the biomechanical characteristic of cartilage. This stress relaxation allows the bundle of fiber-type Liesegang-patterned complex to endure greater deformation.

Thermo-growing ion clusters enabled healing strengthening and tough adhesion for highly reliable skin electronics

Self-healing and self-adhesion capacities are essential for many modern applications such as skin-interfaced electronics for improving longevity and reliability. However, the self-healing efficiency and adhesive toughness of most synthetic polymers are limited to their original network, making reliability under dynamic deformation still challenging. Herein, inspired by the growth of living organisms, a highly stretchable supramolecular elastomer based on thermo-responsive ion clusters and a dynamic polysulfide backbone was developed. Attributed to the synergic growth of ion clusters and dynamic exchange of disulfide bonds, the elastomer exhibited unique healing strengthening (healing efficiency >200%) and thermo-enhanced tough adhesion (interfacial toughness >500 J m-2) performances. To prove its practical application in highly reliable skin electronics, we further composited the elastomer with a zwitterion to prepare a highly conductive ionic elastomer and applied it in wearable strain sensing and long-term electrophysiological detection. This work provides a new avenue to realize high reliability in skin interfaced electronics.

Bioadhesive interface for marine sensors on diverse soft fragile species

Marine animals equipped with sensors provide vital information for understanding their ecophysiology and collect oceanographic data on climate change and for resource management. Existing methods for attaching sensors to marine animals mostly rely on invasive physical anchors, suction cups, and rigid glues. These methods can suffer from limitations, particularly for adhering to soft fragile marine species such as squid and jellyfish, including slow complex operations, unreliable fixation, tissue trauma, and behavior changes of the animals. However, soft fragile marine species constitute a significant portion of ocean biomass (>38.3 teragrams of carbon) and global commercial fisheries. Here we introduce a soft hydrogel-based bioadhesive interface for marine sensors that can provide rapid (time <22 s), robust (interfacial toughness >160 J m-2), and non-invasive adhesion on various marine animals. Reliable and rapid adhesion enables large-scale, multi-animal sensor deployments to study biomechanics, collective behaviors, interspecific interactions, and concurrent multi-species activity. These findings provide a promising method to expand a burgeoning research field of marine bio-sensing from large marine mammals and fishes to small, soft, and fragile marine animals.

Nacre-Mimetic Structure Multifunctional Ion-Conductive Hydrogel Strain Sensors with Ultrastretchability, High Sensitivity, and Excellent Adhesive Properties

Recently, conductive hydrogels have emerged as promising materials for smart, wearable devices. However, limited mechanical properties and low sensitivity greatly restrict their lifespan. Based on the design of biomimetic-layered structure, the conductive hydrogels with nacre-mimetic structure were prepared by using layered acrylic bentonite (AABT) and phytic acid (PA) as multifunctional "brick" and "mortar" units. Among them, the unique rigid cyclic multihydroxyl structure of the "organic mortar" PA preserves both ultrastretchability (4050.02%) and high stress (563.20 kPa) of the hydrogel, which far exceeds most of the reported articles. Because of the synergistic effect of AABT and PA, the hydrogel exhibits an excellent adhesive strength (87.74 kPa). The role of AABT in the adhesive properties of hydrogels is proposed for the first time, and a general strategy for improving the adhesive properties of hydrogels by using AABT is demonstrated. Furthermore, AABT provides ion channels and PA ionizes abundant H+, conferring a high gauge factor (GF = 14.95) and excellent antimicrobial properties to the hydrogel. Also, inspired by fruit batteries, simple self-powered flexible sensors were developed. Consequently, this study provides knowledge for functional bentonite filler modified hydrogel, and the prepared multifunctional ionic conductive hydrogel shows great application potential in the field of intelligent wearable devices.

Robust, Sprayable, and Multifunctional Hydrogel Coating through a Polycation Reinforced (PCR) Surface Bridging Strategy

The sprayable hydrogel coatings that can establish robust adhesion onto diverse materials and devices hold enormous potential; however, a significant challenge persists due to monomer hydration, which impedes even coverage during spraying and induces inadequate adhesion post-gelation. Herein, a polycation-reinforced (PCR) surface bridging strategy is presented to achieve tough and sprayable hydrogel coatings onto diverse materials. The polycations offer superior wettability and instant electrostatic interactions with plasma-treated substrates, facilitating an effective spraying application. This PCR-based hydrogel coatings demonstrate tough adhesion performance to inert PTFE and silicone, including remarkable shear strength (161 ± 49 kPa for PTFE), interfacial toughness (198 ± 27 J m-2 for PTFE), and notable tolerance to cyclic tension (10 000 cycles, 200% strain, silicone). Meanwhile, this method can be applied to various hydrogel formulations, offering diverse functionalities, including underwater adhesion, lubrication, and drug delivery. Furthermore, the PCR concept enables the conformal construction of durable hydrogel coatings onto sophisticated medical devices like cardiovascular stents. Given its simplicity and adaptability, this approach paves an avenue for incorporating hydrogels onto solid surfaces and potentially promotes untapped applications.

Hydrogen Bonds-Pinned Entanglement Blunting the Interfacial Crack of Hydrogel-Elastomer Hybrids

Anchoring a layer of amorphous hydrogel on an antagonistic elastomer holds potential applications in surface aqueous lubrication. However, the interfacial crack propagation usually occurs under continuous loads for amorphous hydrogel, leading to the failure of hydrogel interface. This work presents a universal strategy to passivate the interfacial cracks by designing a hydrogen bonds-pinned entanglement (Hb-En) structure of amorphous hydrogel on engineering elastomers. The unique Hb-En structure is created by pinning well-tailored entanglements via covalent-like hydrogen bonds, which can amplify the delocalization of interfacial stress concentration and elevate the necessary fracture energy barrier within hydrogel interface. Therefore, the interfacial crack propagation can be suppressed under single and cyclic loads, resulting in a high interfacial toughness over 1650 J m-2 and an excellent interfacial fatigue threshold of 423 J m-2. Such a strategy universally works on blunting the interfacial crack between hydrogel coating and various elastomer materials with arbitrary shapes. The superb fatigue-crack insensitivity at the interface allows for durable aqueous lubrication of hydrogel coating with low friction.

Low-impedance tissue-device interface using homogeneously conductive hydrogels chemically bonded to stretchable bioelectronics

Stretchable bioelectronics has notably contributed to the advancement of continuous health monitoring and point-of-care type health care. However, microscale nonconformal contact and locally dehydrated interface limit performance, especially in dynamic environments. Therefore, hydrogels can be a promising interfacial material for the stretchable bioelectronics due to their unique advantages including tissue-like softness, water-rich property, and biocompatibility. However, there are still practical challenges in terms of their electrical performance, material homogeneity, and monolithic integration with stretchable devices. Here, we report the synthesis of a homogeneously conductive polyacrylamide hydrogel with an exceptionally low impedance (~21 ohms) and a reasonably high conductivity (~24 S/cm) by incorporating polyaniline-decorated poly(3,4-ethylenedioxythiophene:polystyrene). We also establish robust adhesion (interfacial toughness: ~296.7 J/m2) and reliable integration between the conductive hydrogel and the stretchable device through on-device polymerization as well as covalent and hydrogen bonding. These strategies enable the fabrication of a stretchable multichannel sensor array for the high-quality on-skin impedance and pH measurements under in vitro and in vivo circumstances.

Stretchable Electronics with Strain-Resistive Performance

Stretchable electronics have attracted tremendous attention amongst academic and industrial communities due to their prospective applications in personal healthcare, human-activity monitoring, artificial skins, wearable displays, human-machine interfaces, etc. Other than mechanical robustness, stable performances under complex strains in these devices that are not for strain sensing are equally important for practical applications. Here, a comprehensive summarization of recent advances in stretchable electronics with strain-resistive performance is presented. First, detailed overviews of intrinsically strain-resistive stretchable materials, including conductors, semiconductors, and insulators, are given. Then, systematic representations of advanced structures, including helical, serpentine, meshy, wrinkled, and kirigami-based structures, for strain-resistive performance are summarized. Next, stretchable arrays and circuits with strain-resistive performance, that integrate multiple functionalities and enable complex behaviors, are introduced. This review presents a detailed overview of recent progress in stretchable electronics with strain-resistive performances and provides a guideline for the future development of stretchable electronics.

Growth of Double-Network Tough Hydrogel Coatings by Surface-Initiated Polymerization

Hydrogel coatings exhibit versatile applications in biomedicine, flexible electronics, and environmental science. However, current coating methods encounter challenges in simultaneously achieving strong interfacial bonding, robust hydrogel coatings, and the ability to coat substrates with controlled thickness. This paper introduces a novel approach to grow a double-network (DN) tough hydrogel coating on various substrates. The process involves initial substrate modification using a silane coupling agent, followed by the deposition of an initiator layer on its surface. Subsequently, the substrate is immersed in a DN hydrogel precursor, where the coating grows under ultraviolet (UV) illumination. Precise control over the coating thickness is achieved by adjusting the UV illumination duration and the initiator quantity. The experimental measurement of adhesion reveals strong bonding between the DN hydrogel coating and diverse substrates, reaching up to 1012.9 J/m2 between the DN hydrogel coating and a glass substrate. The lubricity performance of the DN hydrogel coating is experimentally characterized, which is dependent on the coating thickness, applied pressure, and sliding velocity. The incorporation of 3D printing technology into the current coating method enables the creation of intricate hydrogel coating patterns on a flat substrate. Moreover, the hydrogel coating's versatility is demonstrated through its effective applications in oil-water separation and antifogging glasses, underscoring its wide-ranging potential. The robust DN hydrogel coating method presented here holds promise for advancing hydrogel applications across diverse fields.

Black phosphorus boosts wet-tissue adhesion of composite patches by enhancing water absorption and mechanical properties

Wet-tissue adhesives have long been attractive materials for realizing complicated biomedical functions. However, the hydration film on wet tissues can generate a boundary, forming hydrogen bonds with the adhesives that weaken adhesive strength. Introducing black phosphorus (BP) is believed to enhance the water absorption capacity of tape-type adhesives and effectively eliminate hydration layers between the tissue and adhesive. This study reports a composite patch integrated with BP nanosheets (CPB) for wet-tissue adhesion. The patch's improved water absorption and mechanical properties ensure its immediate and robust adhesion to wet tissues. Various bioapplications of CPB are demonstrated, such as rapid hemostasis (within ~1-2 seconds), monitoring of physical-activity and prevention of tumour-recurrence, all validated via in vivo studies. Given the good practicability, histocompatibility and biodegradability of CPB, the proposed patches hold significant promise for a wide range of biomedical applications.

Stable water splitting using photoelectrodes with a cryogelated overlayer

Hydrogen production techniques based on solar-water splitting have emerged as carbon-free energy systems. Many researchers have developed highly efficient thin-film photoelectrochemical (PEC) devices made of low-cost and earth-abundant materials. However, solar water splitting systems suffer from short lifetimes due to catalyst instability that is attributed to both chemical dissolution and mechanical stress produced by hydrogen bubbles. A recent study found that the nanoporous hydrogel could prevent the structural degradation of the PEC devices. In this study, we investigate the protection mechanism of the hydrogel-based overlayer by engineering its porous structure using the cryogelation technique. Tests for cryogel overlayers with varied pore structures, such as disconnected micropores, interconnected micropores, and surface macropores, reveal that the hydrogen gas trapped in the cryogel protector reduce shear stress at the catalyst surface by providing bubble nucleation sites. The cryogelated overlayer effectively preserves the uniformly distributed platinum catalyst particles on the device surface for over 200 h. Our finding can help establish semi-permanent photoelectrochemical devices to realize a carbon-free society.

A high-current hydrogel generator with engineered mechanoionic asymmetry

Mechanoelectrical energy conversion is a potential solution for the power supply of miniaturized wearable and implantable systems; yet it remains challenging due to limited current output when exploiting low-frequency motions with soft devices. We report a design of a hydrogel generator with mechanoionic current generation amplified by orders of magnitudes with engineered structural and chemical asymmetry. Under compressive loading, relief structures in the hydrogel intensify net ion fluxes induced by deformation gradient, which synergize with asymmetric ion adsorption characteristics of the electrodes and distinct diffusivity of cations and anions in the hydrogel matrix. This engineered mechanoionic process can yield 4 mA (5.5 A m-2) of peak current under cyclic compression of 80 kPa applied at 0.1 Hz, with the transferred charge reaching up to 916 mC m-2 per cycle. The high current output of this miniaturized hydrogel generator is beneficial for the powering of wearable devices, as exemplified by a controlled drug-releasing system for wound healing. The demonstrated mechanisms for amplifying mechanoionic effect will enable further designs for a variety of self-powered biomedical systems.

Inkjet Printing of Nanoscale Functional Patterns on 2D Crystalline Materials and Transfer to Soft Materials

Nanometer-scale control over surface functionality is important in applications ranging from nanoscale electronics to regenerative medicine. However, approaches that provide precise control over surface chemistry at the nanometer scale are often challenging to use with higher throughput and in more heterogeneous environments (e.g., complex solutions, porous interfaces) common for many applications. Here, we demonstrate a scalable inkjet-based method to generate 1 nm-wide functional patterns on 2D materials such as graphite, which can then be transferred to soft materials such as hydrogels. We examine fluid dynamics associated with the inkjet printing process for low-viscosity amphiphile inks designed to maximize ordering with limited residue and show that microscale droplet fluid dynamics influence nanoscale molecular ordering. Additionally, we show that scalable patterns generated in this way can be transferred to hydrogel materials and used to create surface chemical patterns that induce adsorption of charged particles, with effects strong enough to overcome electrostatic repulsion between a charged hydrogel and a like-charged nanoparticle.

A 3D printable tissue adhesive

Tissue adhesives are promising alternatives to sutures and staples for joining tissues, sealing defects, and immobilizing devices. However, existing adhesives mostly take the forms of glues or hydrogels, which offer limited versatility. We report a direct-ink-write 3D printable tissue adhesive which can be used to fabricate bioadhesive patches and devices with programmable architectures, unlocking new potential for application-specific designs. The adhesive is conformable and stretchable, achieves robust adhesion with wet tissues within seconds, and exhibits favorable biocompatibility. In vivo rat trachea and colon defect models demonstrate the fluid-tight tissue sealing capability of the printed patches, which maintained adhesion over 4 weeks. Moreover, incorporation of a blood-repelling hydrophobic matrix enables the printed patches to seal actively bleeding tissues. Beyond wound closure, the 3D printable adhesive has broad applicability across various tissue-interfacing devices, highlighted through representative proof-of-concept designs. Together, this platform offers a promising strategy toward developing advanced tissue adhesive technologies.