The airborne lifetime of small speech droplets and their potential importance in SARS-CoV-2 transmission

Evolution Characteristics and Mechanism of Three-Phase Contact Line of a DNA Microdroplet Impacting and Spreading on a Hydrophilic Horizontal Solid Surface

The phenomena and characteristics of droplets impacting and spreading on a horizontal solid surface are key scientific issues in microfluidic technology and surface physics. The movement regularity and mechanism of the three-phase contact line (TCL) of DNA microdroplets spreading on a hydrophilic PMMA smooth surface without splashing or rebounding are investigated by high-speed camera technology. Some significant results are achieved, for example: based on the changes in droplet morphology, the changes of DNA droplet TCL are divided into eight stages, i.e., expanding, pinning, retracting, repinning, microexpanding, micro-oscillating, stabilizing, and retraction drying, which are helpful to understand the deposition of DNA molecules on the substrate surface. Among them, the TCL moves intensely in the stages of expanding and retracting, respectively, following the cubic function and quadratic function; then, TCL remains virtually unchanged since entering the repinning stage until the stabilizing stage, and DNA molecules are deposited on the surface of PMMA, accumulating to form crystals. Furthermore, the relationship between three correlated damped-like oscillations, i.e., droplet top height (htop), TCL position, and dynamic contact angle (DCA) size, is systematically investigated; the htop oscillates first, then the TCL and DCA oscillate after a delay of 5 ms, and the oscillation period increases sequentially, which is 7.55, 7.90, and 8.40 ms, respectively. Finally, the effects of dynamic characteristics and crystallization of DNA molecules on TCL movement and DCA size are expounded. This research provides detailed experimental data and proposes a theoretical model for understanding the dynamic mechanism of DNA droplet spreading on solid surfaces and has been helpful for designing DNA chips and developing micro-/nano-fluidic sensors.

Quanta emission rate during speaking and coughing mediated by indoor temperature and humidity

In epidemiological prospective modelling, assessing the hypothetical infectious quanta emission rate (Eq) is critical for estimating airborne infection risk. Existing Eq models overlook environmental factors such as indoor relative humidity (RH) and temperature (T), despite their importance to droplet evaporation dynamics. Here we include these environmental factors in a prospective Eq model based on the airborne probability functions with emitted droplet distribution for speaking and coughing activities. Our results show relative humidity and temperature have substantial influence on Eq. Drier environments exhibit a notable increase in suspended droplets (cf. moist environments), with Eq having a 10-fold increase when RH decreases from 90 % to 20 % for coughing and a 2-fold increase for speaking at a representative summer indoor environment (T = 25° C). In warmer environments, Eq values are consistently higher (cf. colder), with increases of up to 22 % for coughing and 9 % for speaking. This indicates temperature has a smaller impact than humidity. We demonstrate that indoor environmental conditions are important when quantifying the quanta emission rate using a prospective method. This is essential for assessing airborne infection risk.

Design, synthesis, and antiviral activity of fragmented-lapatinib aminoquinazoline analogs towards SARS-CoV-2 inhibition

The severe impact of COVID-19 on global health and economies highlights the critical need for innovative treatments. Recently, lapatinib, a drug initially used for breast cancer, has been identified as a potential inhibitor of the main protease (Mpro) of SARS-CoV-2, meriting further investigation. Utilizing rational design strategies and guided by MD simulations, we developed novel aminoquinazoline analogs based on fragmented lapatinib's structure. Preliminary computational screenings identified promising candidates, which were synthesized using a concise 3-4 step process. In vitro assays demonstrated notable antiviral efficacy against SARS-CoV-2-infected cells for all analogs, with Bb1 showing an EC50 of 1.10 μM and significantly lower toxicity (13.55 % at 50 μM) compared to lapatinib. Further studies confirmed that these analogs effectively inhibit SARS-CoV-2 Mpro, with Bb7 displaying the highest activity. MD simulations revealed that Bb7 achieves stability within the Mpro binding pocket through interactions with specific residues. These findings indicate that aminoquinazoline analogs hold significant promise as therapeutic candidates for COVID-19.

Recent developments in the field of radiotherapy for the management of lung cancer

Lung cancer has a poor prognosis, and further improvements in outcomes are needed. Radiotherapy plays an important role in the treatment of unresectable lung cancer, and there have been recent developments in the field of radiotherapy for the management of lung cancer. However, to date, there have been few reviews on the improvement in treatment outcomes associated with high precision radiotherapy for lung cancer. Thus, this review aimed to summarize the recent developments in radiotherapy techniques and indicate the future directions in the use of radiotherapy for lung cancer. Stereotactic body radiotherapy (SBRT) for unresectable stage I lung cancer has been reported to improve local control rates without severe adverse events, such as radiation pneumonitis. For locally advanced lung cancer, a combination of chemoradiotherapy and adjuvant immune checkpoint inhibitors dramatically improves treatment outcomes, and intensity-modulated radiotherapy (IMRT) enables safer radiation therapy with less frequent pneumonitis. Particle beam therapy, such as carbon-ion radiotherapy and proton beam therapy, has been administered as advanced medical care for patients with lung cancer. Since 2024, it has been covered under insurance for early stage lung cancer with tumors ≤ 5 cm in size in Japan. In addition to chemotherapy, local ablative radiotherapy improves treatment outcomes in patients with oligometastatic stage IV lung cancer. A particular problem with radiotherapy for lung cancer is that the target location changes with respiratory motion, and various physical methods have been used to control respiratory motion. Recently, coronavirus disease has had a major impact on lung cancer treatment, and cancer treatment during situations, such as the coronavirus pandemic, must be performed carefully. To improve treatment outcomes for lung cancer, it is necessary to fully utilize evolving radiotherapy modalities, and the role of radiotherapy in lung cancer treatment is expected to increase.

Risk assessment of infection of COVID-19 contacts based on scenario simulation

We constructed a rapid infection risk assessment model for contacts of COVID-19. The improved Wells-Riley model was used to estimate the probability of infection for contacts of COVID-19 in the same place and evaluate their risk grades. We used COVID-19 outbreaks that were documented to validate the accuracy of the model. We analyzed the relationship between controllable factors and infection probability and constructed common scenarios to analyze the infection risk of contacts in different scenarios. The model showed the robustness of the fitting (mean relative error = 5.89%, mean absolute error = 2.03%, root mean squared error = 2.03%, R2 = 0.991). We found that improving ventilation from poorly ventilated to naturally ventilated and wearing masks can reduce the probability of infection by about two times. Contacts in places of light activity, loud talking or singing, and heavy exercise, oral breathing (e.g., gyms, KTV, choirs) were at higher risk of infection. The model constructed in this study can quickly and accurately assess the infection risk grades of COVID-19 contacts. Simply opening doors and windows for ventilation can significantly reduce the risk of infection in certain places. The places of light activity, loud talking or singing, and heavy exercise, oral breathing, should pay more attention to prevent and control transmission of the epidemic.

Temperature-Directed Morphology Transformation Method for Precision-Engineered Polymer Nanostructures

With polymer nanoparticles now playing an influential role in biological applications, the synthesis of nanoparticles with precise control over size, shape, and chemical functionality, along with a responsive ability to environmental changes, remains a significant challenge. To address this challenge, innovative polymerization methods must be developed that can incorporate diverse functional groups and stimuli-responsive moieties into polymer nanostructures, which can then be tailored for specific biological applications. By combining the advantages of emulsion polymerization in an environmentally friendly reaction medium, high polymerization rates due to the compartmentalization effect, chemical functionality, and scalability, with the precise control over polymer chain growth achieved through reversible-deactivation radical polymerization, our group developed the temperature-directed morphology transformation (TDMT) method to produce polymer nanoparticles. This method utilized temperature or pH responsive nanoreactors for controlled particle growth and with the added advantages of controlled surface chemical functionality and the ability to produce well-defined asymmetric structures (e.g., tadpoles and kettlebells). This review summarizes the fundamental thermodynamic and kinetic principles that govern particle formation and control using the TDMT method, allowing precision-engineered polymer nanoparticles, offering a versatile and an efficient means to produce 3D nanostructures directly in water with diverse morphologies, high purity, high solids content, and controlled surface and internal functionality. With such control over the nanoparticle features, the TDMT-generated nanostructures could be designed for a wide variety of biological applications, including antiviral coatings effective against SARS-CoV-2 and other pathogens, reversible scaffolds for stem cell expansion and release, and vaccine and drug delivery systems.

3D modelling and simulation of thermal effects and dispersion of particles carrying infectious respiratory agents in a railway transport coach

Even though the COVID-19 pandemic now belongs to the long history of infectious diseases that have struck humanity, pathogenic biological agents continue to pose a recurring threat in private places, but also and mainly in places where the public congregates. In our recent research published in this journal in 2022 and 2023, we considered the illustrative example of a commuter train coach in which a symptomatic or asymptomatic passenger, assumed to be infected with a respiratory disease, sits among other travellers. The passenger emits liquid particles containing, for example, COVID-19 virions or any other pathogen. The size spectrum of particles varies depending on whether they are produced during breathing, speaking, coughing or sneezing. More specifically, droplets associated with breathing are in the range of 1-10 µm in aerodynamic diameter, while at the other end of the spectrum, drops associated with coughing can reach 100-1000 µm. In the first part of our research, we used Computational Fluid Dynamics (CFD) to model and simulate in 3D the transport and dispersion of particles from 1 µm to 1 mm in the turbulent flow generated by the ventilation of the railway coach. We used both the Eulerian approach and the Lagrangian approach and showed that the results were strictly similar and illustrated the very distinct aerodynamics, on one hand, of the aerosol of droplets suspended in the air and, on the other hand, of the drops falling or behaving like projectiles depending on their initial speed. In the second part of our research, we developed a model of filtration through a typical surgical mask and possible leaks around the mask if it is poorly adjusted. We resumed the twin experiment of the railway coach and compared the distribution of droplets depending on whether the passengers (including the infected one) wear masks or not and whether the masks are perfectly fitted or worn loosely. Our method made it possible to quantify the particles suspended in the air of the railway coach depending on whether the infected passenger wore their mask more or less well. In this third article, we specifically explore how thermal effects due to the presence of passengers influence the spatio-temporal distribution in the railway coach of aerosols produced by the breathing infected person. We demonstrate that the influence of thermal effects on aerodynamics is very significant and can be very favourable for air decontamination if the ventilation system is judiciously configured. Beyond its application to a commuter train, our work confirms the value of validated CFD tools for describing the airflow and dispersion of particles in complex spaces that do not always allow experimentation. The models that we have developed are applicable to any other semi-confined, ventilated public place, such as a classroom, a hospital room or a performance hall, and they enable the objective assessment of whether the occupation of these spaces could be critical with regard to infectious contamination and of how to limit this ubiquitous risk.

Debulking influenza and herpes simplex virus strains by a wide-spectrum anti-viral protein formulated in clinical grade chewing gum

Lack of Herpes Simplex Virus (HSV) vaccine, low vaccination rates of Influenza viruses, waning immunity and viral transmission after vaccination underscore the need to reduce viral loads at their transmission sites. Oral virus transmission is several orders of magnitude higher than nasal transmission. Therefore, in this study, we evaluated neutralization of viruses using a natural viral trap protein (FRIL) formulated in clinical-grade chewing gum. FRIL is highly stable in the lablab bean powder (683 days) and in chewing gum (790 days), and fully functional (794 days) when stored at ambient temperature. They passed the bioburden test with no aerobic bacteria, yeasts/molds, with minimal moisture content (1.28-5.9%). Bean gum extracts trapped HSV-1/HSV-2 75-94% in a dose-dependent manner through virus self-aggregation. Mastication simulator released >50% release of FRIL within 15 min of chewing the bean gum. In plaque reduction assays, >95% neutralization of H1N1 and H3N2 required ∼40 mg/mL, HSV-1 160 mg/mL, and HSV-2 74 mg/mL of bean gum for 1,000 copies/mL virus particles. Therefore, a 2000 mg bean gum tablet has more than adequate potency for clinical evaluation and is safe with no detectable levels of glycosides. These observations augur well for evaluating bean gum in human clinical studies to minimize virus infection/transmission.

Relationship between oral health literacy and changes in self-assessment of oral health during COVID-19

Background/purpose

Health literacy is thought to play a major role in implementing health behaviors, such as preventing coronavirus disease 2019 (COVID-19). In this study, we aimed to examine the relationship between oral health literacy (OHL), dietary literacy (DL), and changes in oral health and eating habits during the COVID-19 pandemic.

Materials and methods

The self-assessment questionnaire, including questions on oral and dietary conditions for each period of the COVID-19 pandemic, sources of information, OHL, DL, and frequency of COVID-19 prevention measures, was administered using a web research company. All participants were divided into low- and high-literacy groups based on the median scores: those who scored above the median in the high group and those who scored at or below the median in the low group. Comparisons were conducted between the two groups.

Results

The median OHL and DL scores were 16 and 17 for the 344 participants included in the study (168 males and 176 females); 160 (46.5%) participants had high OHL scores, and 157 (45.6%) had high DL scores. The group with high OHL or DL tended to collect information sent by medical professionals compared to the group with low OHL or DL, had significantly higher scores on self-assessment of oral and dietary conditions, and tended to implement infection control actions more frequently in eating situations.

Conclusion

The high OHL and DL groups gathered information from professionals to have attain oral and dietary conditions regardless of COVID-19 and tended to implement infection prevention measures in oral health and diet.

A review of the role of graphene-based nanomaterials in tackling challenges posed by the COVID-19 pandemic

In 2020, the World Health Organization (WHO) declared a pandemic due to the emergence of the coronavirus disease (COVID-19) which had resulted by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). At present, the emergence of many new variants and mutants were found to be more harmful compared to the previous strains. As a result, research scientists around the world had devoted significant efforts to understand the mechanism, causes and transmission due to COVID-19 along with the treatment to cure these diseases. However, despite achieving several findings, much more was unknown and yet to be explored. Hence, along with these developments, it is also extremely essential to design effective systems by incorporating smart materials to battle the COVID-19. Therefore, several approaches have been implemented to combat against COVID-19. Recently, the graphene-based materials have been explored for the current COVID-19 and future pandemics due to its superior physicochemical properties, providing efficient nanoplatforms for optical and electrochemical sensing and diagnostic applications with high sensitivity and selectivity. Moreover, based on the photothermal effects or reactive oxygen species formation, the carbon-based nanomaterials have shown its potentiality for targeted antiviral drug delivery and the inhibitory effects against pathogenic viruses. Therefore, this review article sheds light on the recent progress and the most promising strategies related to graphene and related materials and its applications for detection, decontamination, diagnosis, and protection against COVID-19. In addition, the key challenges and future directives are discussed in detail for fundamental design and development of technologies based on graphene-based materials along with the demand aspects of graphene-based products and lastly, our personal opinions on the appropriate approaches to improve these technologies respectively.

Characterization of a SARS-CoV-2 Omicron BA.5 direct-contact transmission model in hamsters

As SARS-CoV-2 continues to evolve antigenically to escape vaccine- or infection-induced immunity, suitable animal models are needed to study novel interventions against viral variants. Syrian hamsters are often used because of their high susceptibility to SARS-CoV-2 and associated tissue damage in the respiratory tract. Here, we established a direct-contact transmission model for SARS-CoV-2 Omicron BA.5 in hamsters. First, we determined whether 103 or 104 TCID50 in a low-volume inoculum led to reproducible infection and viral shedding in male and female hamsters. Next, we determined the optimal co-housing timing and duration between donor and recipient hamsters required for consistent direct-contact transmission. Finally, we compared viral loads and histopathological lesions in the respiratory tissues of donor and recipient hamsters. Intranasal inoculation of hamsters with 103 TCID50 and 104 TCID50 Omicron BA.5 in 10 µl per nostril led to reproducible infection. Viral loads in the throat measured by RT-qPCR were comparable between male and female hamsters. Notably, the shedding of infectious virus was significantly higher in male hamsters. Compared to SARS-CoV-2 D614G, Omicron BA.5 infection reached lower viral loads, had a delayed peak of virus replication, and induced limited body weight loss. To ensure consistent direct-contact transmission from inoculated donor hamsters to naïve recipients, a co-housing duration of 24 h starting 20 h post-infection of the donors was optimal. We detected mild inflammation in the respiratory tract of donor and recipient hamsters, and viral loads were higher and peaked earlier in donor hamsters compared to recipient hamsters. Taken together, we developed a robust Omicron BA.5 direct-contact transmission model in hamsters, that provides a valuable tool to study novel interventions.

Experience with flexible bronchoscopy for noncoronavirus disease of 2019 indications in pediatric patients during the coronavirus disease of 2019 pandemic

BACKGROUND AND AIM

Flexible bronchoscopy (FB) poses a risk of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) transmission due to aerosol generation. This study aimed to assess the utilization, indications, outcomes, and safety of FB in pediatric patients for noncoronavirus disease of 2019 (COVID-19) reasons during the pandemic.

MATERIALS AND METHODS

We retrospectively analyzed pediatric patients who underwent FB for non-COVID-19 indications at a tertiary children's hospital's pulmonary clinic during the COVID-19 pandemic. Patients showed no COVID-19 symptoms and tested negative for SARS-CoV-2 by real-time polymerase chain reaction (PCR) of nasopharyngeal and throat swabs within 24 h before the procedure. FBs were conducted in the operating room, with healthcare professionals (HCPs) wearing personal protective equipment, including medical N95 masks, gloves, gowns, and eye protection.

RESULTS

Between March 2020 and April 2022, 167 pediatric patients underwent FB for non-COVID-19 indications. Common indications included foreign body aspiration (22.7%), stridor (10.1%), and atelectasis (8.9%). No COVID-19 symptoms were observed in patients on the 1st and 10th days post-FB. During the 1-month follow-up, 52 patients underwent SARSCoV-2 PCR testing, and one patient tested positive in the third week after the procedure. None of the HCPs in the FB team experienced COVID-19 symptoms or tested positive for SARS-CoV-2.

CONCLUSION

A bronchoscopy protocol with safety precautions minimized the risk of COVID-19 transmission, allowing safe FB performance for non-COVID-19 indications in pediatric patients during the pandemic. The experience gained in FB during COVID-19 is valuable for similar situations in the future.

The Effect of Water Resistance Therapy on the Impulse Dispersion of Aerosols During Sustained Phonation

INTRODUCTION

Group singing has been associated with higher transmission risks via exhaled and spread aerosols in the CoVID19 pandemic. For this reason, many musical activities, such as rehearsals and lessons, but also voice therapy sessions, have been restricted in many countries. Consequently, transmission risks and pathways have been studied, such as aerosol amounts generated by exhalation tasks, convectional flows in rooms, or the impulse dispersion of different kinds of phonation. The use of water resistance exercises such as those utilizing LAX VOX®, are common in voice lessons and as vocal warm-ups. With this context, this study investigates the impulse dispersion characteristics of aerosols during a voiced water resistance exercise in comparison to normal singing.

METHODS

Twelve professional singers (six male, six female) were asked to phonate a stable pitch through a silicone tube into a bottle filled with water, holding the end of the tube 5 cm below the surface. Before performing the tasks, the singers inhaled the vapor consisting of 0.5 L base liquid from an e-cigarette. The exhaled gas cloud coming out of the bottle was recorded in all three spatial directions and the dispersion was measured as a function of time.

RESULTS

At the end of the phonation task, the median distance to the front was 0.55 m and the median of the lateral expansion of the cloud was 0.89 m, the maximum to the front reached 0.88 m, and the maximum of lateral expansion 1.05 m. For the upwards direction of the clouds a median of 1.00 m and a maximum of 1.34 m from the mouth were measured. Three seconds after the end of the task, the medians were declining.

CONCLUSION

The exhaled aerosol cloud can expand despite the obstacle of the water when using LAX VOX® during phonation.

Increased luminal area of large conducting airways in patients with COVID-19 and post-acute sequelae of COVID-19: a retrospective case-control study

Coronavirus disease 2019 (COVID-19) is associated with enlarged luminal areas of large conducting airways. In 10-30% of patients with acute COVID-19 infection, symptoms persist for more than 4 wk (referred to as post-acute sequelae of COVID 19, or PASC), and it is unknown if airway changes are associated with this persistence. Thus, we aim to investigate whether luminal area of large conducting airways is different between patients with PASC and COVID-19 and healthy controls. In this retrospective case-control study, 75 patients with PASC (48 females) were age-, height-, and sex-matched to 75 patients with COVID-19 and 75 healthy controls. Using three-dimensional digital reconstruction from computed tomography imaging, we measured luminal areas of seven conducting airways, including trachea, right and left main bronchi, bronchus intermediate, right and left upper lobe, and left lower lobe bronchi. Kruskal-Wallis H test was used to compare measurements between the three groups, as appropriate. Airway luminal areas between COVID-19 and PASC groups were not different (all, P > 0.66). There were no group differences in airway luminal area (PASC vs. control) for trachea and right main bronchus. However, in the remaining five airways, airway luminal areas were 12-39% larger among patients with PASC than in controls (all, P < 0.05). Patients diagnosed with COVID-19 and PASC have greater airway luminal area in most large conducting airways compared with healthy controls. No differences in luminal area between patients with COVID-19 and PASC suggest persistence of changes or insufficient time for reversal of changes.NEW & NOTEWORTHY Three-dimensional reconstruction of airways has shown increased luminal area in patients with COVID-19 and post-acute sequelae of COVID-19 when compared with healthy controls. These findings suggest the role of large conducting airways in the pathogenesis of post-acute sequelae of COVID 19.

Multi-scenario surveillance of respiratory viruses in aerosols with sub-single-copy spatial resolution

Highly sensitive airborne virus monitoring is critical for preventing and containing epidemics. However, the detection of airborne viruses at ultra-low concentrations remains challenging due to the lack of ultra-sensitive methods and easy-to-deployment equipment. Here, we present an integrated microfluidic cartridge that can accurately detect SARS-COV-2, Influenza A, B, and respiratory syncytial virus with a sensitivity of 10 copies/mL. When integrated with a high-flow aerosol sampler, our microdevice can achieve a sub-single-copy spatial resolution of 0.83 copies/m3 for airborne virus surveillance with an air flow rate of 400 L/min and a sampling time of 30 minutes. We then designed a series of virus-in-aerosols monitoring systems (RIAMs), including versions of a multi-site sampling RIAMs (M-RIAMs), a stationary real-time RIAMs (S-RIAMs), and a roaming real-time RIAMs (R-RIAMs) for different application scenarios. Using M-RIAMs, we performed a comprehensive evaluation of 210 environmental samples from COVID-19 patient wards, including 30 aerosol samples. The highest positive detection rate of aerosol samples (60%) proved the aerosol-based SARS-CoV-2 monitoring represents an effective method for spatial risk assessment. The detection of 78 aerosol samples in real-world settings via S-RIAMs confirmed its reliability for ultra-sensitive and continuous airborne virus monitoring. Therefore, RIAMs shows the potential as an effective solution for mitigating the risk of airborne virus transmission.

The role of viruses in oral mucosal lesions

The mucosa of the oral cavity is exposed to a large number of different microorganisms such as archaea, bacteria, fungi, parasites, and viruses. Among those, viruses cause specific infections, which can easily be transmitted from one person to another. The infectious route may not only include patients and their relatives but also the dental professional team. Thus, a wide knowledge regarding specific viral infections is crucial for the daily routine. Signs and symptoms of oral viral infections can be completely absent or develop into a pronounced clinical picture, so that early detection and information determine the further course of the infection and its influence on other inflammatory diseases, such as periodontitis, as well as the safety of family members and the social environment. As the clinical manifestation of viral infections may be highly variable leading to heterogenous mucosal lesions it is, in most cases, mandatory to differentiate them by specific microbiological tests in addition to clinical examination procedures. This article will give an overview of the role of viruses infecting the oral mucosa, and in addition, describe their clinical manifestation and management.

Droplet Micro-Sensor and Detection of Respiratory Droplet Transmission

Droplet transmission is the primary infection route for respiratory diseases like COVID-19 and influenza, but small and low-cost wearable droplet detection devices are a significant challenge. Herein, a respiratory droplet micro-sensor based on graphene oxide quantum dots (GOQDs) assembled onto SiO2 microspheres by the nebulized natural deposition is presented. Benefiting from the energy dissipation of the microsphere to droplets, the sensor can detect droplets as far as 2 m from coughing. With this sensor, droplet signal variations caused by some factors like distance, speech, angles, and wind directions are explored, and the effectiveness of different protective measures in preventing droplet transmission is evaluated. This droplet detection technology is expected to be utilized for the development of personal detection and protection devices against infectious respiratory diseases.

COVID-19 pandemic in Taiz Governorate, Yemen, between 2020 and 2023

BACKGROUND

The coronavirus disease 2019 (COVID-19) is highly contagious and causes a series of health problems, particularly in Yemen, which has a fragile healthcare system and cannot handle public health emergencies.

AIMS

This analysis aimed to determine the epidemiological status of COVID-19 in the Taiz governorate between April 2020 and December 2023.

METHODS

A retrospective study based on surveillance data from the Taiz governorate was used. The required data were gathered from the Ministry of Health and Population in Aden and analyzed using SPSS.

RESULTS

Out of 5826 suspected of COVID-19 cases, 1933 (33.18%) cases were positive for COVID-19 infection. The high rates of COVID-19 cases were reported at 35.40% in males, 37.80% in people aged 35-44 years, 47.20% in 2020, 72.73% in Dhubab district, and 27.78% in March 2021. The overall incidence rate of cases was reported at 6.2 per 10,000 people in Taiz governorate (8.85 in males and 3.80 in females). In addition, the high incidence rate of COVID-19 was observed among age groups ≥ 65 years, in 2021, and in Al-Mukha districts. In total, the rate of fatality cases was 14.12%, the higher rate of fatality cases was 15.46% among males and 32.23% among individuals aged ≥ 65 years, and 26.97% in 2020.

CONCLUSION

In this finding, the incidence rate of COVID-19 is high. It is necessary to increase the public's awareness of the transmission and prevention methods of COVID-19, as well as implement appropriate strategies to protect populations from infectious diseases.

Effectiveness of a suction device for containment of pathogenic aerosols and droplets

BACKGROUND

As the global community begins recovering from the COVID-19 pandemic, the challenges due to its aftermath remain. This health crisis has highlighted challenges associated with airborne pathogens and their capacity for rapid transmission. While many solutions have emerged to tackle this challenge, very few devices exist that are inexpensive, easy to manufacture, and versatile enough for various settings.

METHODS

This paper presents a novel suction device designed to counteract the spread of aerosols and droplets and be cost-effective and adaptable to diverse environments. We also conducted an experimental study to evaluate the device's effectiveness using an artificial cough generator, a particle counter, and a mannequin in an isolated system. We measured droplet removal rates with simulated single and repeated cough incidents. Also, measurements were taken at four distinct areas to compare its effectiveness on direct plume versus indirect particle removal.

RESULTS

The device reduced airborne disease transmission risk, as evidenced by its capacity to decrease the half-life of aerosol volume from 23.6 minutes to 15.6 minutes, effectively capturing aerosol-sized droplets known for their extended airborne persistence. The suction device lessened the peak total droplet volume from peak counts. At 22 minutes post peak droplet count, the count had dropped 24% without the suction device and 43% with the suction device.

CONCLUSIONS

The experiment's findings confirm the suction device's capability to effectively remove droplets from the environment, making it a vital tool in enhancing indoor air quality. Given the sustained performance of the suction device irrespective of single or multiple cough events, this demonstrates its potential utility in reducing the risk of airborne disease transmission. 3D printing for fabrication opens the possibility of a rapid iterative design process, flexibility for different configurations, and rapid global deployment for future pandemics.

A COVID-19 cluster analysis in an office: Assessing the long-range aerosol and fomite transmissions with infection control measures

Simulated exposure to severe acute respiratory syndrome coronavirus 2 in the environment was demonstrated based on the actual coronavirus disease 2019 cluster occurrence in an office, with a projected risk considering the likely transmission pathways via aerosols and fomites. A total of 35/85 occupants were infected, with the attack rate in the first stage as 0.30. It was inferred that the aerosol transmission at long-range produced the cluster at virus concentration in the saliva of the infected cases on the basis of the simulation, more than 108 PFU mL-1. Additionally, all wearing masks effectiveness was estimated to be 61%-81% and 88%-95% reduction in risk for long-range aerosol transmission in the normal and fit state of the masks, respectively, and a 99.8% or above decline in risk of fomite transmission. The ventilation effectiveness for long-range aerosol transmission was also calculated to be 12%-29% and 36%-66% reductions with increases from one air change per hour (ACH) to two ACH and six ACH, respectively. Furthermore, the virus concentration reduction in the saliva to 1/3 corresponded to the risk reduction for long-range aerosol transmission by 60%-64% and 40%-51% with and without masks, respectively.

The Risk of Aircraft-Acquired SARS-CoV-2 Transmission during Commercial Flights: A Systematic Review

The aircraft-acquired transmission of SARS-CoV-2 poses a public health risk. Following PRISMA guidelines, we conducted a systematic review and analysis of articles, published prior to vaccines being available, from 24 January 2020 to 20 April 2021 to identify factors important for transmission. Articles were included if they mentioned index cases and identifiable flight duration, and excluded if they discussed non-commercial aircraft, airflow or transmission models, cases without flight data, or that were unable to determine in-flight transmission. From the 15 articles selected for in-depth review, 50 total flights were analyzed by flight duration both as a categorical variable-short (<3 h), medium (3-6 h), or long flights (>6 h)-and as a continuous variable with case counts modeled by negative binomial regression. Compared to short flights without masking, medium and long flights without masking were associated with 4.66-fold increase (95% CI: [1.01, 21.52]; p < 0.0001) and 25.93-fold increase in incidence rates (95% CI: [4.1, 164]; p < 0.0001), respectively; long flights with enforced masking had no transmission reported. A 1 h increase in flight duration was associated with 1.53-fold (95% CI: [1.19, 1.66]; p < 0.001) increase in the incidence rate ratio (IRR) of cases. Masking should be considered for long flights.

Reopening the Bavarian State Opera Safely: Hygiene Strategies and Incidence of COVID-19 in Artistic Staff During Theater Season 2020/2021

Due to the drastically rising coronavirus disease (COVID-19) incidence since March 2020, social life was shut down across the globe, and most opera houses were closed. As a result, there are limited data on SARS-CoV-2 infections among artists. The Bavarian State Opera has been reopened in September 2020. This study aimed to identify the incidence of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection among employees in the Bavarian State Opera. In addition, the various hygiene strategies for the work groups within the institution are described. During the study period from September 1, 2020 to July 31, 2021, 10,061 nasopharyngeal swabs were obtained from 1,460 artistic staff members in a rolling system. During the entire study period, 61 individuals tested positive for SARS-CoV-2. None of the patients had a severe disease course. Compared to the seven-day-incidence per 100,000 German inhabitants, the estimated corresponding incidence among employees was lower at 37 weeks and higher or equal at 9 weeks. Among the infected individuals, 58.3% were symptomatic, 23.3% were presymptomatic, and 18.3% were asymptomatic. Forty-five percent of employees reported that they had been infected in their private environment, 41.7% suspected that their colleagues were the main contact, and 13.3% were unsure about the origin of their infection. Twenty-four diseased employees were ballet dancers, eight from the orchestra, seven from the administration, seven from the choir singers, six from the costume department, 10 from technical support, and one guest solo singer. In the 2020/2021 theater season, increased SARS-CoV-2 infections and large disease outbreaks were avoided at the Bavarian State Opera. Hygiene strategies, that existed since the beginning, was specifically designed for various work areas in the opera. Regular, mandatory PCR testing and follow-up of positive cases with the issuance of quarantine were performed. Using this disease management approach, artistic work at and reopening of the Bavarian State Opera was feasible with a well-controlled risk.

The Effect of Coronavirus Disease 2019 on Adverse Events in Health Care: A Retrospective Study in Ground and Helicopter Emergency Medical Services

OBJECTIVE

The coronavirus disease 2019 (COVID-19) pandemic has proven to be a significant hardship for the entire world. Health care systems and their workers have been stretched to their limits. Research regarding whether this increased strain has affected patient safety has not been sufficient, especially in emergency medical services. The aim of this study was to determine if there has been an increased rate of adverse events in ground and helicopter emergency medical services since the onset of the COVID-19 pandemic.

METHODS

A 2-year retrospective review was performed at a Midwest regional critical care transport service. The rate of adverse events for 1-year periods before and after March 13, 2020, was the primary outcome. All adverse events that generated a quality improvement incident report form (QIRF) were included, except those generated for non-clinical-related incidents. Additionally, a smaller time frame between May 1st and August 31st of both years was included containing all flagged adverse events from peer reviewers; not all of these generated a QIRF.

RESULTS

In the time period between March 13, 2019, and March 12, 2020, 5 of 3,154 (0.16%) calls generated a QIRF versus 21 of 3,185 (0.66%) calls between March 13, 2020, and March 12, 2021. There was a significant relationship showing an adverse event was more likely to happen after the onset of COVID-19 compared with before (χ21 [N = 6,339] = 8.643, P ≤ .001). Additionally, from May 1st to August 31st, the total adverse event rates were 16.86% (143/848 calls) and 24.46% (387/1,582 calls) for 2019 and 2020, respectively. Similarly, statistical significance existed for adverse events occurring after onset of the pandemic versus before (χ21 [N = 2,430] = 18.253, P ≤ .001).

CONCLUSION

A higher rate of adverse events for the year after the onset of COVID-19 existed. Additional studies looking at the causes of adverse events and patient outcomes should be undertaken to further understand this increase.

Emerging use of air eDNA and its application to forensic investigations - A review

Biological material is routinely collected at crime scenes and from exhibits and is a key type of evidence during criminal investigations. Improvements in DNA technologies allow collection and profiling of trace samples, comprised of few cells, significantly expanding the types of exhibits targeted for DNA analysis to include touched surfaces. However, success rates from trace and touch DNA samples tend to be poorer compared to other biological materials such as blood. Simultaneously, there have been recent advances in the utility of environmental DNA collection (eDNA) in identification and tracking of different biological organisms and species from bacteria to naked mole rats in different environments, including, soil, ice, snow, air and aquatic. This paper examines the emerging methods and research into eDNA collection, with a special emphasis on the potential forensic applications of human DNA collection from air including challenges and further studies required to progress implementation.

Resolving the Loss of Intermediate-Size Speech Aerosols in Funnel-Guided Particle Counting Measurement

Modeling of airborne virus transmission and protection against it requires knowledge of the amount of biofluid emitted into the atmosphere and its viral load. Whereas viral concentrations in biofluids are readily measured by quantitative PCR, the total volume of fluids aerosolized during speaking, as measured by different researchers using different technologies, differs by several orders of magnitude. We compared collection methods in which the aerosols first enter into a low humidity chamber either by direct injection or via commonly used funnel and tubing arrangements, followed by standard optical particle sizer measurement. This "collect first, measure later" approach sacrifices recording of the temporal correlation between aerosol generation and sound types such as plosives and vowels. However, the direct-injection mode prevents inertia deposition associated with the funnel arrangements and reveals far more intermediate size (5-20 μm diameter) particles that can dominate the total mass of the ejected respiratory aerosol. The larger aerosol mass observed with our method partially reconciles the large discrepancy between the SARS-CoV-2 infectious dose estimated from superspreader event analyses and that from human challenge data. Our results also impact measures to combat airborne virus transmission because they indicate that aerosols that settle faster than good room ventilation rates can dominate this process.

Aerosol Dispersion During Different Phonatory Tasks in Amateur Singers

INTRODUCTION

Due to increased aerosol generation during singing, choir rehearsals were widely prohibited in the course of the CoVID-19 pandemic. Most studies on aerosol generation and dispersion focus on professional singers. However, it has not been clarified if these data are also representative for amateur singers.

METHODS

Nine non-professional singers (four male, five female) were asked to perform five tasks; speaking (T+), singing a text softly (MT-) and loudly (MT+), singing on the vowel [ə] (M+) and singing with a N95 mask (MT+N95). Before performing the tasks, the singers were asked to inhale 0.5 L vapor produced by an e-cigarette consisting of the basic liquid. The spread of the exhaled vapor was recorded in all three dimensions by high-definition cameras and the impulse dispersion was detected as a function of time.

RESULTS

Regarding the median dispersion to the front, all tasks showed comparable distances from 0.69 m to 0.82 m at the end of the tasks. However, the maximum aerosol dispersion showed a larger variety among different subjects or tasks, respectively. Especially in the M+ task a maximum distance of 1.96 m to the front was reached by a single subject. Although singing with a N95 mask resulted in a slightly increased median dispersion to the front, the maximum dispersion was decreased from 1.47 m (MT+) to 1.04 m (MT+N95).

CONCLUSION

The maximum dispersion distance to the front of 1.96 m at the end of the M+ task and 1.47 m at the end of the MT+ task showed higher values in comparison to professional singers. Differences in phonation, articulation and mouth opening could lead to greater impulse dispersion. Singing in loud phonation with a N95 mask reduced the maximum impulse dispersion to the front to 1.04 m. Taking all results into consideration, a slightly larger safety distance should be necessary for non-professional singers.

The airborne transmission of viruses causes tight transmission bottlenecks

The transmission bottleneck describes the number of viral particles that initiate an infection in a new host. Previous studies have used genome sequence data to suggest that transmission bottlenecks for influenza and SARS-CoV-2 involve few viral particles, but the general principles of virus transmission are not fully understood. Here we show that, across a broad range of circumstances, tight transmission bottlenecks are a simple consequence of the physical process of airborne viral transmission. We use mathematical modelling to describe the physical process of the emission and inhalation of infectious particles, deriving the result that that the great majority of transmission bottlenecks involve few viral particles. While exceptions to this rule exist, the circumstances needed to create these exceptions are likely very rare. We thus provide a physical explanation for previous inferences of bottleneck size, while predicting that tight transmission bottlenecks prevail more generally in respiratory virus transmission.

Evaluating infection risks in buses based on passengers' dynamic temporal and typical spatial scenarios: A case study of COVID-19

Conventional buses, as an indispensable part of the urban public transport system, impose cross-infection risks on passengers. To assess differential risks due to dynamic staying durations and locations, this study considered four spatial distributions (i = 1-4) and six temporal scenarios (j = 1-6) of buses. Based on field measurements and a risk assessment approach combining both short-range and room-scale effects, risks are evaluated properly. The results showed that temporal asynchrony between infected and susceptible individuals significantly affects disease transmission rates. The Control Case assumes that infected and susceptible individuals enter and leave synchronously. However, ignoring temporal asynchrony scenarios, i.e., the Control Case, resulted in overestimation (+30.7 % to +99.6 %) or underestimation (-15.2 % to -69.9 %) of the actual risk. Moreover, the relative difference ratios of room-scale risks between the Control Case and five temporal scenarios are impacted by ventilation. Short-range risk exists only if infected and susceptible individuals have temporal overlap on the bus. Considering temporal and spatial asynchrony, a more realistic total reproduction number (R) can be obtained. Subsequently, the total R was assessed under five temporal scenarios. On average, for the Control Case, the total R was estimated to be +27.3 % higher than j = 1, -9.3 % lower than j = 2, +12.8 % higher than j = 3, +33.0 % lower than j = 4, and + 77.6 % higher than j = 5. This implies the need for a combination of active prevention and real-time risk monitoring to enable rigid travel demand and control the spread of the epidemic.

Three dimensional analysis of the exhalation flow in the proximity of the mouth

The human exhalation flow is characterized in this work from the three-dimensional velocimetry results obtained by using the stereo particle image velocimetry (SPIV) measurement technique on the flow emitted from a realistic airway model. For this purpose, the transient exhalation flow through the mouth of a person performing two different breaths corresponding to two metabolic rates, standing relaxed (SR) and walking active (WA), is emulated and studied. To reproduce the flow realistically, a detailed three-dimensional model obtained from computed tomography measurements on real subjects is used. To cope with the variability of the experimental data, a subsequent analysis of the results is performed using the TR-PIV (time resolved particle image velocimetry) technique. Exhalation produces a transient jet that becomes a puff when flow emission ends. Three-dimensional vector fields of the jet velocity are obtained in five equally spaced transverse planes up to a distance of Image 1 from the mouth at equally spaced time instants Image 2 which will be referred to as phases (φ), from the beginning to the end of exhalation. The time evolution during exhalation of the jet area of influence, the velocity field and the jet air entrainment have been characterized for each of the jet cross sections. The importance of the use of realistic airway models for the study of this type of flow and the influence of the metabolic rate on its development are also analyzed. The results obtained contribute to the characterization of the human exhalation as a pathway of the transmission of pathogens such as SARS-CoV-2 virus.

Host and viral determinants of airborne transmission of SARS-CoV-2 in the Syrian hamster

It remains poorly understood how SARS-CoV-2 infection influences the physiological host factors important for aerosol transmission. We assessed breathing pattern, exhaled droplets, and infectious virus after infection with Alpha and Delta variants of concern (VOC) in the Syrian hamster. Both VOCs displayed a confined window of detectable airborne virus (24-48 hr), shorter than compared to oropharyngeal swabs. The loss of airborne shedding was linked to airway constriction resulting in a decrease of fine aerosols (1-10 µm) produced, which are suspected to be the major driver of airborne transmission. Male sex was associated with increased viral replication and virus shedding in the air. Next, we compared the transmission efficiency of both variants and found no significant differences. Transmission efficiency varied mostly among donors, 0-100% (including a superspreading event), and aerosol transmission over multiple chain links was representative of natural heterogeneity of exposure dose and downstream viral kinetics. Co-infection with VOCs only occurred when both viruses were shed by the same donor during an increased exposure timeframe (24-48 hr). This highlights that assessment of host and virus factors resulting in a differential exhaled particle profile is critical for understanding airborne transmission.

Cyclosporine A micellar nasal spray characterization and antiviral action against SARS-CoV-2

The upper airways represent the point of entrance from where Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) infection spreads to the lungs. In the present work, α-tocopheryl-polyethylene-glycol succinate (TPGS) micelles loaded with cyclosporine A (CSA) were developed for nasal administration to prevent or treat the viral infection in the very first phases. The behavior of the micelles in presence of simulated nasal mucus was investigated in terms of stability and mucopenetration rate, evidencing long-term stability and fast diffusion across the glycoproteins matrix. Moreover, the spray characteristics of the micellar formulation and deposition profile in a silicon nasal model were studied using three nasal spray devices. Results allowed to identify the nasal spray pump (BiVax, Aptar) able to provide the wider and uniform deposition of the nasal cavity. The cyclosporine A micelles antiviral activity against SARS-CoV-2 was tested on the Omicron BA.1 variant using Vero E6 cells with protocols simulating treatment before, during and after the infection of the upper airways. Complete viral inactivation was observed for the cyclosporine-loaded micelles while a very low activity was evidenced for the non-formulated drug, suggesting a synergistic activity of the drug and the formulation. In conclusion, this work showed that the developed cyclosporine A-loaded micellar formulations have the potential to be clinically effective against a wide spectrum of coronavirus variants.

Airborne transmission risks of tuberculosis and COVID-19 in schools in South Africa, Switzerland, and Tanzania: Modeling of environmental data

The COVID-19 pandemic renewed interest in airborne transmission of respiratory infections, particularly in congregate indoor settings, such as schools. We modeled transmission risks of tuberculosis (caused by Mycobacterium tuberculosis, Mtb) and COVID-19 (caused by SARS-CoV-2) in South African, Swiss and Tanzanian secondary schools. We estimated the risks of infection with the Wells-Riley equation, expressed as the median with 2.5% and 97.5% quantiles (credible interval [CrI]), based on the ventilation rate and the duration of exposure to infectious doses (so-called quanta). We computed the air change rate (ventilation) using carbon dioxide (CO2) as a tracer gas and modeled the quanta generation rate based on reported estimates from the literature. The share of infectious students in the classroom is determined by country-specific estimates of pulmonary TB. For SARS-CoV-2, the number of infectious students was estimated based on excess mortality to mitigate the bias from country-specific reporting and testing. Average CO2 concentration (parts per million [ppm]) was 1,610 ppm in South Africa, 1,757 ppm in Switzerland, and 648 ppm in Tanzania. The annual risk of infection for Mtb was 22.1% (interquartile range [IQR] 2.7%-89.5%) in South Africa, 0.7% (IQR 0.1%-6.4%) in Switzerland, and 0.5% (IQR 0.0%-3.9%) in Tanzania. For SARS-CoV-2, the monthly risk of infection was 6.8% (IQR 0.8%-43.8%) in South Africa, 1.2% (IQR 0.1%-8.8%) in Switzerland, and 0.9% (IQR 0.1%-6.6%) in Tanzania. The differences in transmission risks primarily reflect a higher incidence of SARS-CoV-2 and particularly prevalence of TB in South Africa, but also higher air change rates due to better natural ventilation of the classrooms in Tanzania. Global comparisons of the modeled risk of infectious disease transmission in classrooms can provide high-level information for policy-making regarding appropriate infection control strategies.

The Effect of Singers' Masks on the Impulse Dispersion of Aerosols During Singing

BACKGROUND

During the Covid-19 pandemic, singing activities were restricted due to several super-spreading events that have been observed during rehearsals and vocal performances. However, it has not been clarified how the aerosol dispersion, which has been assumed to be the leading transmission factor, could be reduced by masks which are specially designed for singers.

MATERIAL AND METHODS

Twelve professional singers (10 of the Bavarian Radio-Chorus and two freelancers, seven females and five males) were asked to sing the melody of the ode of joy of Beethoven's 9th symphony "Freude schöner Götterfunken, Tochter aus Elisium" in D-major without masks and afterwards with five different singers' masks, all distinctive in their material and proportions. Every task was conducted after inhaling the basic liquid from an e-cigarette. The aerosol dispersion was recorded by three high-definition video cameras during and after the task. The cloud was segmented and the dispersion was analyzed for all three spatial dimensions. Further, the subjects were asked to rate the practicability of wearing the tested masks during singing activities using a questionnaire.

RESULTS

Concerning the median distances of dispersion, all masks were able to decrease the impulse dispersion of the aerosols to the front. In contrast, the dispersion to the sides and to the top was increased. The evaluation revealed that most of the subjects would reject performing a concert with any of the masks.

CONCLUSION

Although, the results exhibit that the tested masks could be able to reduce the radius of aerosol expulsion for virus-laden aerosol particles, there are more improvements necessary to enable the practical implementations for professional singing.

Risk Factors Associated with Prolonged Nasopharyngeal Carriage of SARS-CoV-2 and Length of Stay among Patients Admitted to a COVID-19 Referral Center in Manila, Philippines

Objective

Prolonged nasopharyngeal carriage of SARS-CoV-2 has been linked to prolonged hospital stay and delayed radiologic recovery. To determine if clinical risk factors are associated with prolonged nasopharyngeal carriage or longer hospital stay, we performed a descriptive analysis of 169 moderate to severe COVID-19 patients admitted at the Philippine General Hospital from March to June 2020.

Methods

Length of nasopharyngeal RT-PCR positivity and clinical demographic data were extracted from existing patient records. Chi-square test, Mann-Whitney U test, and regression analysis were performed to describe the association of clinical risk factors with prolonged nasopharyngeal carriage and length of hospital stay.

Results

The median duration of carriage was 19 days (IQR 12.0-30.0 days). No comorbidities or inflammatory markers had a statistically significant association with prolonged nasopharyngeal carriage defined as >24 days of nasopharyngeal RT-PCR positivity. Characteristics associated with a statistically significant longer hospital stay included chronic kidney disease stages 3-5, severe disease, and use of empiric antibiotics on admission. Prolonged carriage >24 days, hsCRP, and D-dimer at admission, also had a statistically significant but weak correlation with length of stay.

Conclusion

Among patients with moderate disease, comorbidities and inflammatory markers were not associated with prolonged COVID-19 nasopharyngeal carriage. Prolonged nasopharyngeal carriage >24 days was associated with longer hospital stay, while D-dimer and hsCRP levels at admission, also had statistically significant but small effects on increasing the hospital length of stay.

On-site airborne pathogen detection for infection risk mitigation

Human-infecting pathogens that transmit through the air pose a significant threat to public health. As a prominent instance, the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) that caused the COVID-19 pandemic has affected the world in an unprecedented manner over the past few years. Despite the dissipating pandemic gloom, the lessons we have learned in dealing with pathogen-laden aerosols should be thoroughly reviewed because the airborne transmission risk may have been grossly underestimated. From a bioanalytical chemistry perspective, on-site airborne pathogen detection can be an effective non-pharmaceutic intervention (NPI) strategy, with on-site airborne pathogen detection and early-stage infection risk evaluation reducing the spread of disease and enabling life-saving decisions to be made. In light of this, we summarize the recent advances in highly efficient pathogen-laden aerosol sampling approaches, bioanalytical sensing technologies, and the prospects for airborne pathogen exposure measurement and evidence-based transmission interventions. We also discuss open challenges facing general bioaerosols detection, such as handling complex aerosol samples, improving sensitivity for airborne pathogen quantification, and establishing a risk assessment system with high spatiotemporal resolution for mitigating airborne transmission risks. This review provides a multidisciplinary outlook for future opportunities to improve the on-site airborne pathogen detection techniques, thereby enhancing the preparedness for more on-site bioaerosols measurement scenarios, such as monitoring high-risk pathogens on airplanes, weaponized pathogen aerosols, influenza variants at the workplace, and pollutant correlated with sick building syndromes.

COVID-19 transmission in U.S. transit buses: A scenario-based approach with agent-based simulation modeling (ABSM)

The transit bus environment is considered one of the primary sources of transmission of the COVID-19 (SARS-CoV-2) virus. Modeling disease transmission in public buses remains a challenge, especially with uncertainties in passenger boarding, alighting, and onboard movements. Although there are initial findings on the effectiveness of some of the mitigation policies (such as face-covering and ventilation), evidence is scarce on how these policies could affect the onboard transmission risk under a realistic bus setting considering different headways, boarding and alighting patterns, and seating capacity control. This study examines the specific policy regimes that transit agencies implemented during early phases of the COVID-19 pandemic in USA, in which it brings crucial insights on combating current and future epidemics. We use an agent-based simulation model (ABSM) based on standard design characteristics for urban buses in USA and two different service frequency settings (10-min and 20-min headways). We find that wearing face-coverings (surgical masks) significantly reduces onboard transmission rates, from no mitigation rates of 85% in higher-frequency buses and 75% in lower-frequency buses to 12.5%. The most effective prevention outcome is the combination of KN-95 masks, open window policies, and half-capacity seating control during higher-frequency bus services, with an outcome of nearly 0% onboard infection rate. Our results advance understanding of COVID-19 risks in the urban bus environment and contribute to effective mitigation policy design, which is crucial to ensuring passenger safety. The findings of this study provide important policy implications for operational adjustment and safety protocols as transit agencies seek to plan for future emergencies.

Understanding lifetime and dispersion of cough-emitted droplets in air

To understand the exact transmission routes of SARS-CoV-2 and to explore effects of time, space and indoor environment on the dynamics of droplets and aerosols, rigorous testing and observation must be conducted. In the current work, the spatial and temporal dispersions of aerosol droplets from a simulated cough were comprehensively examined over a long duration (70 min). An artificial cough generator was constructed to generate reliably repeatable respiratory ejecta. The measurements were performed at different locations in front (along the axial direction and off-axis) and behind the source in a sealed experimental enclosure. Aerosols of 0.3-10 µm (around 20% of the maximum nuclei count) were shown to persist for a very long time in a still environment, and this has a substantial implication for airborne disease transmission. The experiments demonstrated that a ventilation system could reduce the total aerosol volume and the droplet lifetime significantly. To explain the experimental observations in more detail and to understand the droplet in-air behaviour at various ambient temperatures and relative humidity, numerical simulations were performed using the Eulerian-Lagrangian approach. The simulations show that many of the small droplets remain suspended in the air over time instead of falling to the ground.

Unequal effects of SARS-CoV-2 infections: model of SARS-CoV-2 dynamics in Cameroon (Sub-Saharan Africa) versus New York State (United States)

Worldwide, the recent SARS-CoV-2 virus disease outbreak has infected more than 691,000,000 people and killed more than 6,900,000. Surprisingly, Sub-Saharan Africa has suffered the least from the SARS-CoV-2 pandemic. Factors that are inherent to developing countries and that contrast with their counterparts in developed countries have been associated with these disease burden differences. In this paper, we developed data-driven COVID-19 mathematical models of two 'extreme': Cameroon, a developing country, and New York State (NYS) located in a developed country. We then identified critical parameters that could be used to explain the lower-than-expected COVID-19 disease burden in Cameroon versus NYS and to help mitigate future major disease outbreaks. Through the introduction of a 'disease burden' function, we found that COVID-19 could have been much more severe in Cameroon than in NYS if the vaccination rate had remained very low in Cameroon and the pandemic had not ended.

SARS-CoV-2 Aerosol and Intranasal Exposure Models in Ferrets

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is the causative agent of the worldwide COVID-19 pandemic. Animal models are extremely helpful for testing vaccines and therapeutics and for dissecting the viral and host factors that contribute to disease severity and transmissibility. Here, we report the assessment and comparison of intranasal and small particle (~3 µm) aerosol SARS-CoV-2 exposure in ferrets. The primary endpoints for analysis were clinical signs of disease, recovery of the virus in the upper respiratory tract, and the severity of damage within the respiratory tract. This work demonstrated that ferrets were productively infected with SARS-CoV-2 following either intranasal or small particle aerosol exposure. SARS-CoV-2 infection of ferrets resulted in an asymptomatic disease course following either intranasal or small particle aerosol exposure, with no clinical signs, significant weight loss, or fever. In both aerosol and intranasal ferret models, SARS-CoV-2 replication, viral genomes, and viral antigens were detected within the upper respiratory tract, with little to no viral material detected in the lungs. The ferrets exhibited a specific IgG immune response to the SARS-CoV-2 full spike protein. Mild pathological findings included inflammation, necrosis, and edema within nasal turbinates, which correlated to positive immunohistochemical staining for the SARS-CoV-2 virus. Environmental sampling was performed following intranasal exposure of ferrets, and SARS-CoV-2 genomic material was detected on the feeders and nesting areas from days 2-10 post-exposure. We conclude that both intranasal and small particle aerosol ferret models displayed measurable parameters that could be utilized for future studies, including transmission studies and testing SARS-CoV-2 vaccines and therapeutics.

Design and testing of a sew-free origami mask for improvised respiratory protection

Respiratory aerosols with diameters smaller than 100μm have been confirmed as important vectors for the spread of diseases such as SARS-CoV-2. While disposable and cloth masks afford some protection, they are typically inefficient at filtering these aerosols and require specialized fabrication devices to produce. We describe a fabrication technique that makes use of a folding procedure (origami) to transform any filtration material into a mask. These origami masks can be fabricated by non-experts at minimal cost and effort, provide adequate filtration efficiencies, and are easily scaled to different facial sizes. Using a mannequin fit test simulator, we demonstrate that these masks can provide filtration efficiencies of over 90% while simultaneously providing greater comfort as demonstrated by pressure drops of <20 Pa. We also quantify mask leakage by measuring the variations in filtration efficiency and pressure drop when masks are sealed to the mannequin face compared to when the mask is unsealed but positioned to achieve the best fit. While leakage generally trended with pressure drop, some of the best performing mask media achieved <10% reduction in filtration efficiency due to leakage. Because this mask can provide high filtration efficiencies at low pressure drop compared to commercial alternatives, it is likely to promote greater mask wearing tolerance and acceptance.

The "new normal" of hygiene measures at the end of the COVID-19 epidemic: a survey among French dentists

OBJECTIVES

The COVID-19 epidemic upset the standards in terms of hygiene and protection in the dental office, bringing additional precautions for dentists. The objective of our study was to draw the "new normal" of hygiene measures at the end of the COVID-19 epidemic.

MATERIALS AND METHODS

A self-administered questionnaire about transitional recommendations for oral care in the context of the COVID-19 epidemic was published online in private groups dedicated to French dentists.

RESULTS

The 246 respondents understood the reasons behind those recommendations, since 10 out of 11 measures reached a mean score greater than 2.5 on a 0 (not at all) to 4 (absolutely) scale when it came to determining whether the measure made the practitioner feel safe and ensured patient safety. Besides, more of the respondents intended to maintain the measures than they were to apply them before the epidemic.

CONCLUSIONS

The COVID-19 epidemic reshaped the relationship to hygiene and protection measures in the context of dental practices. The "new normal" of hygiene measures at the end of the COVID-19 epidemic will probably involve more protective measures than before.

CLINICAL RELEVANCE

These results constitute interesting avenues for public health deliberation, which would make it possible to best adapt future health recommendations in order to define the "new normal" of hygiene measures in dental practices at the end of the COVID-19 epidemic. Therefore, it could have an impact on all practitioners in their clinical activities.

Splatter generated by oral surgery irrigation and its implication for infection control

OBJECTIVES

This study aimed to evaluate the splatter contamination generated by rotary instrumentation and irrigation during simulations of surgical extractions. Specifically, comparisons of the splatters generated were made between traditional assistant-based irrigation and self-irrigating drills and between saline and hydrogen peroxide irrigant.

MATERIALS AND METHODS

A fluorescein solution was infiltrated into the irrigation system of high-speed drills, and the surgical extraction procedures were performed on manikins with the typodont teeth. Filter papers were placed at the predetermined locations around the operatory to absorb the fluorescein splatters; these samples underwent photographic image analysis.

RESULTS

The patient chest showed the largest area of splatters, followed by the assistant's face shield. Procedures using the hydrogen peroxide irrigant generated a larger area of splatter than those using the saline irrigant. There was no difference between the splatters produced by assistant irrigation and self-irrigating drill procedures.

CONCLUSIONS

Clinicians should observe and disinfect the locations contaminated by splatters to prevent the spread of infection, since using alternative irrigant or irrigation methods did not reduce the formation of splatters.

CLINICAL RELEVANCE

Oral surgery drills with irrigation generate aerosols and splatters, which have potential to spread airborne pathogens. It is important to understand the patterns of splatters to mitigate contamination.

Respiratory particle emission rates from children during speaking

The number of respiratory particles emitted during different respiratory activities is one of the main parameters affecting the airborne transmission of respiratory pathogens. Information on respiratory particle emission rates is mostly available for adults (few studies have investigated adolescents and children) and generally involves a limited number of subjects. In the present paper we attempted to reduce this knowledge gap by conducting an extensive experimental campaign to measure the emission of respiratory particles of more than 400 children aged 6 to 12 years while they pronounced a phonetically balanced word list at two different voice intensity levels ("speaking" and "loudly speaking"). Respiratory particle concentrations, particle distributions, and exhaled air flow rates were measured to estimate the respiratory particle emission rate. Sound pressure levels were also simultaneously measured. We found out that median respiratory particle emission rates for speaking and loudly speaking were 26 particles s-1 (range 7.1-93 particles s-1) and 41 particles s-1 (range 10-146 particles s-1), respectively. Children sex was significant for emission rates, with higher emission rates for males during both speaking and loudly speaking. No effect of age on the emission rates was identified. Concerning particle size distributions, for both respiratory activities, a main mode at approximately 0.6 µm and a second minor mode at < 2 µm were observed, and no differences were found between males and females. This information provides important input parameters in predictive models adopted to estimate the transmission risk of airborne pathogens in indoor spaces.

Oral mucosa immunity: ultimate strategy to stop spreading of pandemic viruses

Global pandemics are most likely initiated via zoonotic transmission to humans in which respiratory viruses infect airways with relevance to mucosal systems. Out of the known pandemics, five were initiated by respiratory viruses including current ongoing coronavirus disease 2019 (COVID-19). Striking progress in vaccine development and therapeutics has helped ameliorate the mortality and morbidity by infectious agents. Yet, organism replication and virus spread through mucosal tissues cannot be directly controlled by parenteral vaccines. A novel mitigation strategy is needed to elicit robust mucosal protection and broadly neutralizing activities to hamper virus entry mechanisms and inhibit transmission. This review focuses on the oral mucosa, which is a critical site of viral transmission and promising target to elicit sterile immunity. In addition to reviewing historic pandemics initiated by the zoonotic respiratory RNA viruses and the oral mucosal tissues, we discuss unique features of the oral immune responses. We address barriers and new prospects related to developing novel therapeutics to elicit protective immunity at the mucosal level to ultimately control transmission.

Large Particle Emissions from Human Vocalization and Playing of Wind Instruments

Humans emit large salivary particles when talking, singing, and playing musical instruments, which have implications for respiratory disease transmission. Yet little work has been done to characterize the emission rates and size distributions of such particles. This work characterized large particle (dp > 35 μm in aerodynamic diameter) emissions from 70 volunteers of varying age and sex while vocalizing and playing wind instruments. Mitigation efficacies for face masks (while singing) and bell covers (while playing instruments) were also examined. Geometric mean particle count emission rates varied from 3.8 min-1 (geometric standard deviation [GSD] = 3.1) for brass instruments playing to 95.1 min-1 (GSD = 3.8) for talking. On average, talking produced the highest emission rates for large particles, in terms of both number and mass, followed by singing and then instrument playing. Neither age, sex, CO2 emissions, nor loudness (average dBA) were significant predictors of large particle emissions, contrary to previous findings for smaller particle sizes (i.e., for dp < 35 μm). Size distributions were similar between talking and singing (count median diameter = 53.0 μm, GSD = 1.69). Bell covers did not affect large particle emissions from most wind instruments, but face masks reduced large particle count emissions for singing by 92.5% (95% CI: 97.9%, 73.7%).

Peak risk of SARS-CoV-2 infection within 5 s of face-to-face encounters: an observational/retrospective study

The link between aerosol dynamics and viral exposure risk is not fully understood, particularly during movement and face-to-face interactions. To investigate this, we employed Particle Trace Velocimetry with a laser sheet and a high-speed camera to measure microparticles from a human mannequin's mouth. The average peak time in the non-ventilated condition (expiratory volume, 30 L; passing speed, 5 km/h) was 1.33 s (standard deviation = 0.32 s), while that in the ventilated condition was 1.38 s (standard deviation = 0.35 s). Our results showed that the peak of viral exposure risk was within 5 s during face-to-face encounters under both ventilated and non-ventilated conditions. Moreover, the risk of viral exposure greatly decreased in ventilated conditions compared to non-ventilated conditions. Based on these findings, considering a risk mitigation strategy for the duration of 5 s during face-to-face encounters is expected to significantly reduce the risk of virus exposure in airborne transmission.

Host and viral determinants of airborne transmission of SARS-CoV-2 in the Syrian hamster

It remains poorly understood how SARS-CoV-2 infection influences the physiological host factors important for aerosol transmission. We assessed breathing pattern, exhaled droplets, and infectious virus after infection with Alpha and Delta variants of concern (VOC) in the Syrian hamster. Both VOCs displayed a confined window of detectable airborne virus (24-48 h), shorter than compared to oropharyngeal swabs. The loss of airborne shedding was linked to airway constriction resulting in a decrease of fine aerosols (1-10μm) produced, which are suspected to be the major driver of airborne transmission. Male sex was associated with increased viral replication and virus shedding in the air. Next, we compared the transmission efficiency of both variants and found no significant differences. Transmission efficiency varied mostly among donors, 0-100% (including a superspreading event), and aerosol transmission over multiple chain links was representative of natural heterogeneity of exposure dose and downstream viral kinetics. Co-infection with VOCs only occurred when both viruses were shed by the same donor during an increased exposure timeframe (24-48 h). This highlights that assessment of host and virus factors resulting in a differential exhaled particle profile is critical for understanding airborne transmission.

Generative design for COVID-19 and future pathogens using stochastic multi-agent simulation

We propose a generative design workflow that integrates a stochastic multi-agent simulation with the intent of helping building designers reduce the risk posed by COVID-19 and future pathogens. Our custom simulation randomly generates activities and movements of individual occupants, tracking the amount of virus transmitted through air and surfaces from contagious to susceptible agents. The stochastic nature of the simulation requires that many repetitions be performed to achieve statistically reliable results. Accordingly, a series of initial experiments identified parameter values that balanced the trade-off between computational cost and accuracy. Applying generative design to a case study based on an existing office space reduced the predicted transmission by around 10% to 20% compared with a baseline set of layouts. Additionally, a qualitative examination of the generated layouts revealed design patterns that may reduce transmission. Stochastic multi-agent simulation is a computationally expensive yet plausible way to generate safer building designs.