Cobalt and its compounds: update on genotoxic and carcinogenic activities

Genomic landscape of cancer in racially and ethnically diverse populations

Cancer incidence and mortality rates can vary widely among different racial and ethnic groups, attributed to a complex interplay of genetic, environmental and social factors. Recently, substantial progress has been made in investigating hereditary genetic risk factors and in characterizing tumour genomes. However, most research has been conducted in individuals of European ancestries and, increasingly, in individuals of Asian ancestries. The study of germline and somatic genetics in cancer across racial and ethnic groups using omics technologies offers opportunities to identify similarities and differences in both heritable traits and the molecular features of cancer genomes. An improved understanding of population-specific cancer genomics, as well as translation of those findings across populations, will help reduce cancer disparities and ensure that personalized medicine and public health approaches are equitable across racial and ethnic groups.

Genotoxicity Assessment of Co(II) and Ni(II) in HepG2 Cells: Insights into Combined Metal Exposure

The usage of cobalt (Co) and nickel (Ni) in numerous commercial, industrial, and military applications causes widespread exposure nowadays, and concerns are rising about adverse impacts on human health. Emphasis is on the respiratory system, with both metals classified as (possibly) carcinogenic upon inhalation by the International Agency for Research on Cancer (IARC), but limited data are available upon oral exposure. Therefore, this study aims to evaluate the in vitro genotoxicity of Co(II) and Ni(II) and their combination in HepG2 cells, since exposure of those environmental pollutants occurs realistically in concert. Here, Co(II) exposure led to the induction of single-strand breaks and oxidative DNA damage detected by the Comet assay as FPG-sensitive sites, while Ni(II) increased the abundance of γ-H2AX, an indicator for double-strand breaks. Notably, combined exposure to Co(II) and Ni(II) resulted in enhanced DNA damage, especially at the chromosomal level, with increased formation of micronuclei as well as polynucleated cells, indicating a stronger effect compared to single exposure. Furthermore, both metals induced the DNA damage response pathway PARylation. As this process involves the consumption of large amounts of cellular NAD+ after DNA damage, the energy state was assessed upon exposure with Co(II) and Ni(II). Current data indicate that especially Co(II) altered the cellular energy state. This study reveals distinct mechanisms of DNA damage exhibited by Co(II) and Ni(II), which were enhanced after a combined treatment. This highlights the need for further research to estimate the genotoxic potential of targeting cells upon oral intake with increasing environmental entry.

Designed Synthesis of Amino-Azo-Quinoline and Their Nickel(II) Complexes: Molecular Structure, Electrochemistry and an Insight Into Their In Vitro Anti-Cancer Activities

Amino-quinolines are potential candidates that may provide some insight into the current chemotherapeutic research due to their demonstrated anti-cancer activity. This led us to synthesize and explore a new amino-azo-quinoline ligand H2L 1 and its square planar nickel(II) complexes [Ni(HL) (OAc)], 2 and [Ni(HL)Cl], 3 and the structures were determined by Single Crystal X-Ray Diffraction. Theoretical investigation of redox orbitals of the complexes discloses that the reduction process is due to ligand reduction whereas both metal and ligand are contributing towards oxidation. The anti-cancer properties of the ligand and one of the nickel(II) complexes have been assessed by 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide assay, cell migration along with the generation of reactive oxygen species using human epithelial cancer cell line cells. The ligand 1 and complex 3 have been found to show effective anti-cancer activity and for the latter, it is more promising. This may be ascribed to the rigid and robust nature of square planar complex 3, which supports stronger binding with DNA than that of free ligands, possibly due to the flexible nature of the latter. This result has also been validated by molecular docking using nine conformers of the ligand and complex 3 via interaction with B-DNA (PDB ID: 1BNA) where the binding affinity with the complex has been found to be stronger.

Organoselenium transition metal complexes as promising candidates in medicine area

The medicinal properties of transition metal complexes are greatly influenced by the nature and physico-chemical features of the ligand present in the complex structure. Due to the unique biological properties of the organoselenium compounds reflected in the variety of pharmacological activities (such as antioxidative, antiviral, antimicrobial and anticancer), the last years have brought increased interest for their use as a ligands compounds in the design and syntheses of range of transition metal-based coordination compounds that have been explored as antitumor and antimicrobial agents. Our aim in this review is to provide the overview of an recent development of the transition metal complexes bearing organoselenium ligands in the structure that could be promising choice for the treatment of various diseases, particularly cancer and infective diseases. For this purpose, the complexes of Co, Ni, Cu, Zn, Ru, Pd, Pt, Au and Sn as the most explored examples will be included and discussed.

Correlation between serum heavy metals and the risk of oral squamous cell carcinoma and oral potentially malignant disorders

Oral squamous cell carcinoma (OSCC) is a serious public health problem in various Asian countries, including Sri Lanka, and a combination of cultural practices, lifestyle factors, and genetic predispositions influences the incidence of these cancers. The examination of the connection between exposure to heavy metals and the probability of developing oral potentially malignant disorders (OPMD) and OSCC has been limited in its scope, and the overall consequences of such exposure remain largely unknown. This study aims to clarify the link between serum levels of heavy metals and the risk of OSCC and OPMD. The concentrations of seven heavy metals-namely, arsenic (As), cadmium (Cd), chromium (Cr), cobalt (Co), copper (Cu), lead (Pb), and zinc (Zn)-were analyzed in serum samples from 60 cases and 15 controls in the Sri Lankan cohort. The Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES) was used for the analysis. Subsequently, the data underwent statistical evaluation via the Kruskal-Wallis H test, using the Statistical Package for Social Sciences (SPSS) version 28 software, with a confidence interval set at 95%. A p-value less than 0.05 was considered statistically significant. The cohort consisted of 48 men and 27 women, with 15 patients each diagnosed with OSCC, OSF, OLK, and OLP, and 15 healthy controls. The study used the Kruskal-Wallis Test to compare metal concentrations across groups, finding significant differences for all metals except As and Pb. Significant associations were observed between age, past medical history, drug history, gender, smoking, alcohol consumption, and betel chewing. The Spearman Correlation test showed significant correlations between the concentrations of Cr, Co, Cu, As, and Zn and the presence of cancer/precancer conditions. The study's findings suggest that heavy metal contamination may be linked to the development of OSCC and precancerous conditions. When comparing OSCC and OPMD cases with controls, the serum concentrations of As and Pb did not differ significantly. However, Cd, Cr, Co, Cu, and Zn exhibited significantly higher concentrations among cases compared to controls (p < 0.05). This study observed significant variations in the levels of these five heavy metals among cancerous (OSCC), premalignant (OPMD), and healthy tissues, suggesting a potential role in the progression of malignancies. These findings underscore the importance of environmental pollution in this specific context.

Prosthetic Metals: Release, Metabolism and Toxicity

The development of metallic joint prostheses has been ongoing for more than a century alongside advancements in hip and knee arthroplasty. Among the materials utilized, the Cobalt-Chromium-Molybdenum (Co-Cr-Mo) and Titanium-Aluminum-Vanadium (Ti-Al-V) alloys are predominant in joint prosthesis construction, predominantly due to their commendable biocompatibility, mechanical strength, and corrosion resistance. Nonetheless, over time, the physical wear, electrochemical corrosion, and inflammation induced by these alloys that occur post-implantation can cause the release of various metallic components. The released metals can then flow and metabolize in vivo, subsequently causing potential local or systemic harm. This review first details joint prosthesis development and acknowledges the release of prosthetic metals. Second, we outline the metallic concentration, biodistribution, and elimination pathways of the released prosthetic metals. Lastly, we discuss the possible organ, cellular, critical biomolecules, and significant signaling pathway toxicities and adverse effects that arise from exposure to these metals.

Emerging activated tungsten dust: Source, environmental behaviors, and health effects

Fusion energy investigation has stepped to a new stage adopting deuterium and tritium as fuels from the previous stage concentrating hydrogen plasma physics. Special radiation safety issues would be introduced during this stage. In addition to industrial and military uses, tungsten is also regarded as the most promising plasma facing material for fusion reactors. During the operation of fusion reactors, tungsten-based plasma facing materials can be activated via neutron nuclear reaction. Meanwhile, activated tungsten dust can be produced when high-energy plasma interacts with the tungsten-based plasma facing materials, namely plasma wall interaction. Activated tungsten dust would be an emerging environmental pollutant with radiation toxicity containing various radionuclides in addition to the chemical toxicity of tungsten itself. Nonetheless, the historical underestimation of its environmental availability has led to limited research on tungsten compared to other environmental contaminants. This paper presents the first systematic review on the safety issue of emerging activated tungsten dust, encompassing source terms, environmental behaviors, and health effects. The key contents are as follows: 1) to detail the source terms of activated tungsten dust from aspects of tungsten basic properties, generation mechanism, physical morphology and chemical component, radioactivity, as well as potential release pathways, 2) to illustrate the environmental behaviors from aspects of atmospheric dispersion and deposition, transformation and migration in soil, as well as plant absorption and distribution, 3) to identify the toxicity and health effects from aspects of toxicity to plants, distribution in human body, as well as health effects by radiation and chemical toxicity, 4) based on the research progress, research and development issues needed are also pointed out to better knowledge of safety issue of activated tungsten dust, which would be beneficial to the area of fusion energy and ecological impact caused by the routine tungsten related industrial and military applications.

Microbial impact to environmental toxicants Ni(II) and Co(II): Joint toxicity and cellular response in Paramecium

Cobalt (Co) and Nickel (Ni) are increasingly found in our environment. We analysed their combined toxicity and uptake mechanisms in the early food chain by studying bacteria and the bacterivorous ciliate Paramecium as a primary consumer. We exposed both species to these metals to measure the toxicity, uptake and transfer of metals from bacteria to Paramecium. We found that Ni is more toxic than Co, and that toxicity increases for both metals when (i) food bacteria are absent and (ii) both metals are applied in combination. The cellular content in bacteria after exposure shows a concentration dependent bias for either Ni or Co. Comparing single treatment and joint exposure, bacteria show increased levels of both metals when these are both exposed. To imitate the basic level of the food chain, we fed these bacteria to paramecia. The cellular content shows a similar ratio of Nickel and Cobalt as in food bacteria. This is different to the direct application of both metals to paramecia, where Cobalt is enriched over Nickel. This indicates that bacteria can selectively pre-accumulate metals for introduction into the food chain. We also analysed the transcriptomic response of Paramecium to sublethal doses of Nickel and Cobalt to gain insight into their toxicity mechanisms. Gene ontology (GO) analysis indicates common deregulated pathways, such as ammonium transmembrane transport and ubiquitine-associated protein degradation. Many redox-related genes also show deregulation of gene expression, indicating cellular adaptation to increased RONS stress. This suggests that both metals may also target the same cellular pathways and this is consistent with the increased toxicity of both metals when used together. Our data reveal complex ecotoxicological pathways for these metals and highlights the different parameters for their fate in the ecosystem, in the food chain and their ecotoxicological risk after environmental contamination.

Silicon-Carbon Dots-Loaded Mesoporous Silica Nanocomposites (mSiO2@SiCDs): An Efficient Dual Inhibitor of Cu2+-Mediated Oxidative Stress and Aβ Aggregation for Alzheimer's Disease

The redox-active metal ions, especially Cu2+, are highly correlated to Alzheimer's disease (AD) by causing metal ion-mediated oxidative stress and toxic metal-bound β-amyloid (Aβ) aggregates. Numerous pieces of evidence have revealed that the regulation of metal homeostasis could be an effective therapeutic strategy for AD. Herein, in virtue of the interaction of both amino-containing silane and ethylenediaminetetraacetic acid disodium salt for Cu2+, the silicon-carbon dots (SiCDs) are deliberately prepared using these two raw materials as the cocarbon source; meanwhile, to realize the local enrichment of SiCDs and further maximize the chelating ability to Cu2+, the SiCDs are feasibly loaded to the biocompatible mesoporous silica nanoparticles (mSiO2) with the interaction between residual silane groups on SiCDs and silanol groups of mSiO2. Thus-obtained nanocomposites (i.e., mSiO2@SiCDs) could serve as an efficient Cu2+ chelator with satisfactory metal selectivity and further modulate the enzymic activity of free Cu2+ and the Aβ42-Cu2+ complex to alleviate the pathological oxidative stress with an anti-inflammatory effect. Besides, mSiO2@SiCDs show an inspiring inhibitory effect on Cu2+-mediated Aβ aggregation and further protect the neural cells against the toxic Aβ42-Cu2+ complex. Moreover, the transgenic Caenorhabditis elegans CL2120 assay demonstrates the protective efficacy of mSiO2@SiCDs on Cu2+-mediated Aβ toxicity in vivo, indicating its potential for AD treatment.

Blood Levels of Environmental Heavy Metals are Associated with Poorer Iron Status in Ugandan Children: A Cross-Sectional Study

BACKGROUND

Iron deficiency (ID) and environmental exposure to metals frequently co-occur among Ugandan children, but little is known about their associations, although iron and other divalent metals share the same intestinal absorption transporter, divalent metal transporter 1 (DMT1).

OBJECTIVES

We examined associations between iron status and blood concentrations of lead, manganese (Mn), cobalt (Co), and cadmium, both singly and as a mixture.

METHODS

We used data on sociodemographic status, iron biomarkers, and blood concentrations of heavy metals collected from a cross-sectional survey of 100 children aged 6-59 mo in Kampala, Uganda. We compared blood concentrations of metals in ID with iron-sufficient children. We examined associations between a metal mixture and iron biomarkers using multiple linear regression and weighted quintile sum regression.

RESULTS

The median (interquartile range) blood Mn (μg/L) was higher in ID children defined by soluble transferrin receptor (sTfR) and ferritin (ID compared with iron-sufficient children): (sTfR [21.3 {15.1, 28.8}, 11.2 {8.6, 18.5}], ferritin [19.5 {15.0, 27.2}, 11.2 {8.8, 19.6}]; P < 0.001 for both). Similarly, the median (interquartile range) blood Co (μg/L) was higher in ID children by ferritin ([0.5 {0.4, 0.9}, 0.4 {0.3, 0.5}], P = 0.05). Based on the multiple linear regression results, higher blood Co and Mn were associated with poorer iron status (defined by all 4 iron indicators for Co and by sTfR for Mn). The weighted quintile sum regression result showed that higher blood concentrations of a metal mixture were associated with poorer iron status represented by sTfR, ferritin, and hepcidin, mainly driven by Co and Mn.

CONCLUSIONS

Our study findings suggest that poorer iron status is associated with overall heavy metal burden, predominantly Co and Mn, among Ugandan children. Further prospective studies should confirm our primary findings and investigate the combined effects of coexposures to neurotoxicants on the neurodevelopment of young children.

Three-Way Cell-Based Screening of Antistress Compounds: Identification, Validation, and Relevance to Old-Age-Related Pathologies

A variety of environmental stress stimuli have been linked to poor quality of life, tissue dysfunctions, and ailments including metabolic disorders, cognitive impairment, and accelerated aging. Oxidative, metal, and hypoxia stresses are largely associated with these phenotypes. Whereas drug development and disease therapeutics have advanced remarkably in last 3 decades, there are still limited options for stress management. Because the latter can effectively decrease the disease burden, we performed cell-based screening of antistress compounds by recruiting 3 chemical models of oxidative (paraquat), metal (cadmium nitrate), or hypoxia (cobalt chloride) stresses. The screening of 70 compounds for their ability to offer protection against oxidative, metal, and hypoxia stresses resulted in the selection of 5 compounds: Withaferin-A (Wi-A), methoxy Withaferin-A (mWi-A), Withanone (Wi-N), triethylene glycol (TEG), and Ashwagandha (Withania somnifera) leaf M2-DMSO extract (M2DM). Molecular assays revealed that whereas stress caused increase in (a) apoptosis, (b) reactive oxygen species accumulation coupled with mitochondrial depolarization, (c) DNA double-strand breaks, and (d) protein aggregation, low nontoxic doses of the selected compounds caused considerable protection. Furthermore, Wi-N, TEG, and their mixture-treated normal human fibroblasts (at young, mature, and senescent stages representing progressively increasing accumulation of stress) showed increase in proliferation. Taken together, these results suggested 3-way (oxidative, metal, and hypoxia) antistress potential of Wi-N and TEG that may be useful for management of environmental and old-age-related pathologies.

The inorganic chemistry of the cobalt corrinoids - an update

The inorganic chemistry of the cobalt corrinoids, derivatives of vitamin B₁₂, is reviewed, with particular emphasis on equilibrium constants for, and kinetics of, their axial ligand substitution reactions. The role the corrin ligand plays in controlling and modifying the properties of the metal ion is emphasised. Other aspects of the chemistry of these compounds, including their structure, corrinoid complexes with metals other than cobalt, the redox chemistry of the cobalt corrinoids and their chemical redox reactions, and their photochemistry are discussed. Their role as catalysts in non-biological reactions and aspects of their organometallic chemistry are briefly mentioned. Particular mention is made of the role that computational methods - and especially DFT calculations - have played in developing our understanding of the inorganic chemistry of these compounds. A brief overview of the biological chemistry of the B₁₂-dependent enzymes is also given for the reader's convenience.

Serum cobalt and chromium concentration following total hip arthroplasty: a Bayesian network meta-analysis

The present systematic review investigated the concentration of chromium (Cr) and cobalt (Co) in serum in patients who have undergone total hip arthroplasty (THA). The first outcome of interest was to investigate the mean concentration in serum of Cr and Co using different material combinations and to verify whether their concentrations change significantly using different patterns of head and liner in THA. The second outcome of interest was to investigate whether the time elapsed from the index surgery to the follow-up, BMI, sex, and side exert an influence on the mean concentration of Cr and Co in serum in patients who have undergone THA. The following material combinations were investigated (head-liner): Ceramic-Co Cr (CoCr), CoCr-CoCr, CoCr-Polyethylene, CoCr high carbide-CoCr high carbide. Data from 2756 procedures were retrieved. The mean length of follow-up was 69.3 ± 47.7 months. The ANOVA test evidenced good comparability in age, length of follow-up, BMI, and sex (P > 0.1). In patients who have undergone THA, the mean concentration in the serum of Co ranged between 0.5 µg/L and 3.5 µg/L, and the mean concentration of Cr from 0.6 to 2.6 µg/L. The difference in the concentration of Co and Cr in serum is strictly related to the implant configuration, with the coupling CoCr-CoCr showing the highest and CoCr-Polyethylene showing the lowest concentration. Patient characteristics, BMI, sex, side and the time elapsed from the index surgery to the last follow-up did not exert a significant influence on the concentration of Co and Cr in serum in patients who have undergone total hip arthroplasty (THA).

Risk assessment of metal(loid)s in tea from seven producing provinces in China

To evaluate metal(loid) contamination in tea leaves and assess health risks of tea drinking in China, metal(loid) concentrations in tea leaves from major tea-producing provinces were determined. Nine metal(loid)s (Al, Cr, Co, Ni, Cu, Zn, As, Cd and Pb) were measured in a total of 217 tea samples representing five tea varieties (black tea, dark tea, green tea, oolong tea and white tea) from seven major tea-producing provinces of China (Fujian, Guangdong, Henan, Hunan, Jiangsu, Yunnan and Zhejiang). The results indicated that tea samples from Hunan Province had the highest metal(loid) concentrations, likely due its high prevalence of heavy industrial activities and soil pollution. The concentrations of As and Pb in dark tea were markedly higher than those in other tea varieties. A strong Spearman correlation coefficient (0.78, P < 0.001) of As and Pb in all the tea varieties has also been found, indicating their similar sources. Human health risk assessment for the nine analyzed metal(loid)s indicated that co-exposure to these metal(loids) may not cause significant health risks (hazard index [HI] > 1 suggests considerable health risks). Among the five tea varieties, metal(loids)s in dark and green tea induced relatively higher health risks, with 90th percentile HI values approached 0.8. Co (53.6 %-84.5 %) and Al (3.33 %-15.8 %) made the highest contributions to the HI of the selected tea commodities. Thus, public and regulatory agencies should reduce excessive Co and Al accumulation in these tea varieties during cultivation and production processes.

Cobalt-mediated oxidative DNA damage and its prevention by polyphenol antioxidants

Although cobalt is a required nutrient, it is toxic due to its ability to generate reactive oxygen species (ROS) and damage DNA. ROS generation by Co²⁺ often has been compared to that of Fe²⁺ or Cu⁺, disregarding the reduction potential differences among these metal ions. In plasmid DNA damage studies, a maximum of 15% DNA damage is observed with Co²⁺/H₂O₂ treatment (up to 50 μM and 400 μM, respectively) significantly lower than the 90% damage observed for Fe²⁺/H₂O₂ or Cu⁺/H₂O₂ treatment. However, when ascorbate is added to the Co²⁺/H₂O₂ system, a synergistic effect results in 90% DNA damage. DNA damage by Fe²⁺/H₂O₂ can be prevented by polyphenol antioxidants, but polyphenols both prevent and promote DNA damage by Cu⁺/H₂O₂. When tested for cobalt-mediated DNA damage affects, eight of ten polyphenols (epicatechin gallate, epigallocatechin gallate, propyl gallate, gallic acid, methyl-3,4,5-trihydroxybenzoate, methyl-4,5-dihydroxybenzoate, protocatechuic acid, and epicatechin) prevent cobalt-mediated DNA damage with IC₅₀ values of 1.3 to 27 μM and two (epigallocatechin and vanillic acid) prevent little to no DNA damage. EPR studies demonstrate cobalt-mediated formation of ^•OH, O₂^•-, and ^•OOH, but not ¹O₂ in the presence of H₂O₂ and ascorbate. Epigallocatechin gallate and methyl-4,5-dihydroxybenzoate significantly reduce ROS generated by Co²⁺/H₂O₂/ascorbate, consistent with their prevention of cobalt-mediated DNA damage. Thus, while cobalt, iron, and copper are all d-block metal ions, cobalt ROS generation and its prevention is significantly different from that of iron and copper.

Determination of some heavy metals levels in the meat of animal species (sheep, beef, turkey, and ostrich) and carcinogenic health risk assessment in Kurdistan province in the west of Iran

Heavy metals accumulation in food products as a result of industrialization is one of the main potential threats to public health. This study was aimed to evaluate the concentrations of heavy metals in the meat of some prevalent farm animal species including sheep, beef, turkeys, and ostriches in Sanandaj (one of the strategic cities in Kurdistan province, Iran). In this study, the contents of some heavy metals (selenium, lead, cadmium, arsenic, cobalt, zinc, nickel, copper, and chromium) were assessed in 170 meat samples collected from meat distribution centers in Sanandaj, Kurdistan province. The ICP-MS method was used to assess the levels of these elements in the meat of beef, sheep, turkey, and ostrich as the main consumed meats in this region. Statistical analysis was performed by ANOVA and one-sample t-test, and the correlation coefficient of the concentrations of metals was also calculated. The results showed that there were no significant differences in the average contents of selenium, nickel, cobalt, and chromium among various meats (P > 0.05). However, the amounts of lead, cadmium, arsenic, zinc, copper, chromium, and nickel were meaningfully different to maximum permissible limits (MPL) (P < 0.05). In addition, a significant negative correlation was found between arsenic and selenium in meats. Except for cobalt, the concentrations of other metals were higher than MPL in the evaluated meats. Despite the target hazard quotient (THQ) for cadmium in sheep and beef meats being higher than their MPL (> 1), its target risk of cancer (TR) was acceptable. It can be concluded that monitoring and elimination of heavy metals pollution are essential because of their high accumulation in the meat of main farm animal species in Sanandaj, Kurdistan province.

The application of existing genotoxicity methodologies for grouping of nanomaterials: towards an integrated approach to testing and assessment

The incorporation of nanomaterials (NMs) in consumer products has proven to be highly valuable in many sectors. Unfortunately, however, the same nano specific physicochemical properties, which make these material attractive, might also contribute to hazards for people exposed to these materials. The physicochemical properties of NMs will impact their interaction with biological surroundings and influence their fate and their potential adverse effects such as genotoxicity. Due to the large and expanding number of NMs produced, their availability in different nanoforms (NFs) and their utilization in various formats, it is impossible for risk assessment to be conducted on an individual NF basis. Alternative methods, such as grouping are needed for streamlining hazard assessment. The GRACIOUS Framework provides a logical and science evidenced approach to group similar NFs, allowing read-across of hazard information from source NFs (or non-NFs) with adequate hazard data to target NFs that lack such data. Here, we propose a simple three-tiered testing strategy to gather evidence to determine whether different NFs are sufficiently similar with respect to their potential to induce genotoxicity, in order to be grouped. The tiered testing strategy includes simple in vitro models as well as a number of alternative more complex multi-cellular in vitro models to allow for a better understanding of secondary NM-induced DNA damage, something that has been more appropriate in vivo until recently.

Processed animal proteins (PAPs) in animal nutrition: Assessment of the chemical risk of essential and non-essential elements

BACKGROUND

Processed animal products (PAPs) could be a great alternative to common protein supplements and represent a good example of recycling and valorization of by-products. Due to the reintroduction of certain types of PAPs in feed, a deeper knowledge of these heterogeneous matrices is needed. Thus, the aim of this study is to evaluate the levels of essential elements and inorganic contaminants in 55 PAPs considered as potential alternatives to common protein supplements.

METHODS

PAPs samples were analysed for essential (cobalt, nickel, chromium, copper, zinc, iron and manganese) and non-essential elements (arsenic, cadmium, lead and mercury) by Inductively Coupled Plasma Mass Spectrometer (ICP-MS), Graphite Furnace Atomization Atomic Absorption Spectrometer (GF-AAS) and dual cell Direct Mercury Analyzer spectrometer (DMA-80).

RESULTS

Essential elements were found with the following decreasing order iron>zinc>copper>manganese>chromium>nickel>cobalt (mg kg-1). Only one sample was found non-compliant to lead concentration according to the European Union Regulation while negligible values of others non-essential elements were found.

CONCLUSIONS

This study suggests that PAPs could be a useful supplement for animal diet due to their natural content of essential elements. A careful monitoring of chemical elements should be required and eventually guidelines have to be drafted for a correct use of PAPs to ensure a safe and sustainable feed production.

Dose-response relationships between urinary cobalt concentrations and obesity, insulin resistance, and metabolic-related disorders in the general population

Excessive cobalt exposure has been shown to induce various adverse health effects in animal and human toxicity studies. However, the relationships between cobalt exposure and obesity, insulin resistance, and metabolic-related disorders are rarely studied in epidemiological studies. This study aimed to explore the dose-response relationships between urinary cobalt concentrations and obesity, insulin resistance, and metabolic-related disorders. Adult participants (≥20 years) from the 2005 to 2018 National Health and Nutrition Examination Survey were included. Restricted cubic splines and the log-binomial regression were adopted. Multivariate adjusted prevalence ratios (95% confidence intervals) comparing extreme quartiles of urinary cobalt concentrations were 1.43 (1.29-1.57) for obesity, 1.43 (1.10-1.86) for insulin resistance, 1.21 (1.09-1.34) for metabolic syndrome, 1.16 (1.10-1.23) for elevated waist circumference, 1.20 (1.09-1.33) for elevated triglycerides, 1.14 (1.01-1.29) for reduced high-density lipoprotein cholesterol (HDL-C), 1.06 (0.98-1.15) for elevated blood pressure, and 0.91 (0.79-1.06) for elevated fasting glucose, respectively. Results from the restricted cubic splines showed that an initial steep increase in risk was followed by a weaker increase in risk or a platform beyond 1.0 µg/L for obesity (prevalence ratio (95% confidence interval): 1.41 (1.29-1.55)), insulin resistance (1.33 (1.07-1.65)), metabolic syndrome (1.18 (1.11-1.31)), elevated waist circumference (1.18 (1.11-1.25)), elevated triglycerides (1.21 (1.11-1.33)), and reduced HDL-C (1.15 (1.01-1.30)), respectively. In conclusion, the prevalence of obesity, insulin resistance, metabolic syndrome, elevated waist circumference, elevated triglycerides, and reduced HDL-C progressively increased with increasing urinary cobalt concentrations. The above associations are non-linear and there is not a "safe threshold" below which there are no toxic effects of cobalt.

Ferrostatin-1 alleviates cytotoxicity of cobalt nanoparticles by inhibiting ferroptosis

Cobalt is the main component of metal prostheses in hip arthroplasty. Studies have shown that metal particles mainly composed of cobalt nanoparticles (CoNPs) can cause systemic and local toxic reactions due to various physical and chemical factors. Therefore, elucidating the underlying mechanisms of metal prosthesis action, coupled with identification of effective detoxification drugs are imperative to minimizing postoperative complications and prolonging the service life of these clinical tools. In this study, we treated Balb/3T3 mouse fibroblast cell line with CoNPs and ferrostatin-1, then measured cell viability via the CCK-8 assay. Next, we determined levels of reactive oxygen species (ROS), malondialdehyde (MDA), glutathione (GSH), cobalt and iron contents, as well as glutathione peroxidase 4 (GPX4), and solute carrier family 7 member 11 (SLC7A11) expression in each group. Finally, we employed transmission electron microscopy (TEM) to detect changes in the ultrastructure of each group of cells. Exposure of cells to CoNPs significantly suppressed their viability, and downregulated expression of GSH, GPX4, and SLC7A11 proteins. Conversely, this treatment mediated a significant increase in ROS, MDA, cobalt, and iron levels in the cells. TEM images revealed a marked increase in density of the mitochondrial membrane of cells in the CoNPs group, while the outer membrane was broken. Notably, treatment with ferroptosis inhibitor Ferrostatin-1 alleviated the cytotoxic response caused by CoNPs. These findings suggest that CoNP-induced cytotoxicity may be closely related to ferroptosis, indicating that inhibition of ferroptosis is a potential therapeutic strategy for reducing CoNP toxicity.

The underlying mode of action for lung tumors in a tiered approach to the assessment of inhaled cobalt compounds

A mode of action (MOA) for cobalt substances based on the "International Programme on Chemical Safety Conceptual Framework for Evaluating a MOA for Chemical Carcinogenesis" is presented. The data recorded therein were generated in a tiered testing program described in the preceding papers of this special issue, as well as data from the public domain. The following parameters were included in the evaluation: solubility of cobalt substances in artificial lung fluids (bioelution), in vitro biomarkers for cytotoxicity, reactive oxygen species and hypoxia mimicry, inhalation toxicity following acute exposure and repeated dose inhalation effects. Two distinct groups of cobalt substances emerged: substances inducing all effects across the MOA form one group, associated with the adverse outcome of lung cancer in rodents upon chronic exposure. Another group of cobalt substances induces no or very limited effects in the in vitro and acute testing. Higher tier testing with a representative of this group, tricobalt tetraoxide, showed a response resembling rat lung overload following exposure to high concentrations of poorly soluble particles. Based on the fundamental differences in the lower tier toxicological profile, cobalt substances with an unknown hazard profile can be assigned to either group based on lower tier testing alone.

A tiered approach to investigate the inhalation toxicity of cobalt substances. Tier 3: Inflammatory response following acute inhalation exposure correlates with lower tier data

In vitro studies have shown that cobalt substances predominantly induce pre-inflammatory biomarkers, resulting in a grouping of substances either predicted to cause inflammation following inhalation, or those with a different reactivity profile (poorly-reactive). There is a lack of data on whole-organ lung responses following inhalation of these substances, especially relating to the poorly-reactive group. It is of interest to generate tissue-specific histopathological correlation to better ascertain the predictive nature of the lower tier tests (i.e. tier 1 - bioelution, tiers 2a and b - in vitro markers and ToxTracker testing), in order to understand the type of effects caused by the poorly-reactive group and to gauge long-term effects. Eight cobalt substances were tested in vivo in a customized four-hour toxicity test; with animals sacrificed up to 14-days post-exposure. Histopathological severity scores were assigned based on inflammatory and pre-carcinogenic markers. A clear pattern emerged, with the reactive substances causing a persistent increase in one or more of the selected markers, and absence of these markers with poorly-reactive substances. Longer-term studies should be conducted to investigate the repeated dose effects of the poorly-reactive substances.

A tiered approach to investigate the inhalation toxicity of cobalt substances. Tier 4: Effects from a 28-day inhalation toxicity study with tricobalt tetraoxide in rats

Lung cancer following inhalation in rodents is a major concern regarding exposure to cobalt substances. However, little information is available on adverse effects and toxicity following long-term inhalation exposure to poorly soluble cobalt substances with low bioavailability. Thus, the present study focused on pulmonary effects of the poorly soluble tricobalt tetraoxide (5, 20, 80 mg/m³) in a 28-day inhalation exposure study. Lung weights increased with increasing exposures. Bronchoalveolar lavage fluid analysis and histopathology revealed lung tissue inflammation at the mid-dose with increasing severity in the high-dose group and post-exposure persistency. Markers for cellular damage and cell proliferation were statistically significantly increased. No increase in 8-OH-dG lesions was observed, indicating an absence of oxidative DNA lesions. The primary effect of inhaled Co₃O₄ particles is inflammation of the respiratory tract strongly resembling responses of inhaled "inert dust" substances, with a NOAEC of 5 mg/m³ under the conditions of this test.

Have you caught that outlier yet? Evaluate the utility of repeat testing in nutritional and toxic element assessment

Repeat testing is routinely required by regulatory bodies as a measure to rule out contamination in trace elements and heavy metal analysis, especially when the initial analysis result is outside the reference interval. However, its clinical utilities in detecting analytical measurement outliers have not been systematically evaluated in different clinical testing scenarios. In this study, we present an extensive evaluation of repeat testing and its comparison with the initial analysis in four serum and plasma trace element assays performed by inductively coupled plasma mass spectrometry. We demonstrate that the patient population distributions for these elements differ significantly from the reference interval established by healthy individuals. Accordingly, a significant proportion of the patient specimens required repeat testing when using reference intervals as the threshold to perform repeat analysis. Crucially, comparison of the first analysis and repeat analysis revealed the limited utility of performing repeat measurements. The relative differences between the first and second measurements are consistent with the observed analytical imprecision of the assay and the likelihood of detecting actual analytical outliers is very low.

A tiered approach to investigate the inhalation toxicity of cobalt substances. Tier 1: Bioaccessibility testing

Bioelution tests measure in vitro the release of metal ion in surrogate physiological conditions (termed "bioaccessibility") and estimate the potential bioavailability relative to that of a known reference metal substance. Bioaccessibility of cobalt ion from twelve cobalt substances was tested in three artificial lung fluids (interstitial, alveolar and lysosomal) to gather information about the substances' fate and potential bioavailability in the respiratory tract after inhalation. The results can be used as one line of evidence to support grouping and read-across for substances lacking in vivo data, and where in vivo testing is not readily justifiable. Strong differences were observed in the dissolution behaviour of the substances in the different fluids, with the cobalt substances generally being less soluble in neutral pH fluids and more soluble in the acidic pH fluid. The resulting database, presented with its strengths and limitations, was used to support the formulation of an initial grouping of these cobalt substances into three categories.

A tiered approach to investigate the inhalation toxicity of cobalt substances. Tier 2 b: Reactive cobalt substances induce oxidative stress in ToxTracker and activate hypoxia target genes

Cobalt metal and cobalt sulfate are carcinogenic in rodents following inhalation exposure. The pre-carcinogenic effects associated with exposure to these cobalt substances include oxidative stress and genotoxicity. Some, but not all, cobalt substances induce in vitro clastogenicity or an increase in micronuclei. As a result, these substances are classified genotoxic carcinogens, having major impacts on their risk assessment, e.g. assumption of a non-thresholded dose response. Here, we investigated the potential of nine cobalt substances to cause genotoxicity and oxidative stress using the ToxTracker assay, with an extension to measure biomarkers of hypoxia. None of the nine tested substances activated the DNA damage markers in ToxTracker, and five substances activated the oxidative stress response reporters. The same five substances also activated the expression of several hypoxia target genes. Consistent with the lower tier of testing found in the preceding paper of this series, these compounds can be grouped based on their ability to release bioavailable cobalt ion and to trigger subsequent key events.

OUP accepted manuscript

Artificial stone (AS) is a composite material that has seen widespread use in construction, particularly for kitchen benchtops. However, fabrication processes with AS have been associated with serious lung disease. Safety data sheets (SDSs) aim to provide important information pertaining to composition and health risks. In the case of a complex mixture, SDSs may be problematic in terms of specific information on overall health risks. To assess this issue, we compared empirically determined mineral, metallic, and organic resin content of 25 individual AS products across six suppliers, with the corresponding SDS information. X-ray diffraction was used to quantitate the mineralogical components of AS samples, and X-ray fluorescence was used to estimate the metallic components. Organic material (resin content) was estimated using weight loss during calcination. Although the resin content for all AS samples was within the SDS-reported ranges, there was considerable variability in the crystalline silica content when comparing with supplier’s SDS. Potentially toxicologically relevant metallic and mineral constituents were not reported. Some supplier SDSs were found to provide more information than others. Only one of the six suppliers provided crystalline mineral content other than silica, and only two suppliers provided any information about metals. There remains a limited understanding of lung pathogenesis from AS, and this study highlights the need for more comprehensive and standardized SDS information for risk assessment and management.

Assessment of physical, chemical, and tribochemical properties of biomedical alloys used in explanted modular hip prostheses

During their service life, modular interfaces experience tribological, and corrosion phenomena that lead to deterioration, which in turn can cause a revision procedure to remove the failed prosthesis. To achieve a clearer understanding of the surface performance of those biomedical alloys and the role of the surface properties in the mechanical and chemical performance, samples were taken from retrieval implants made of Ti6Al4V and Co28Cr6Mo alloys. Polarization resistance and pin-on-disk tests were performed on these samples. Physical properties such as contact angle, roughness, microhardness, and Young's modulus were determined. A correlation between surface energy and evolution of the tribological contact was observed for both biomedical alloys. In tribocorrosion tests, titanium particles seem to remain in the surface, unlike what is observed in CoCr alloys. These metallic or oxidized particles could cause necrosis or adverse tissue reactions.

A perspective review on impact and molecular mechanism of environmental carcinogens on human health

Cancer is one of the leading causes of death all around the world. It is a group of diseases characterized by abnormal and uncontrollable division of cells leading to severe health conditions and fatality if remains undiagnosed till later stages. Cancer can be caused due to mutation or sudden alterations by effect of certain external agents. Agents that can cause sudden alterations in the genetic content of an individual are known as mutagens. Mutations can lead to permanent changes in the genetic constituency of an individual and possibly lead to cancer. Mutagenic agents that possess the capacity to induce cancer in humans are called carcinogens. Carcinogens may be naturally present in the environment or generated by anthropogenic activities. However, with the progress in molecular techniques, genetic and/or epigenetic mechanisms of carcinogenesis of a wide range of carcinogens have been elucidated. Present review aims to discuss different types of environmental carcinogens and their respective mechanisms responsible for inducing cancer in humans.

Cobalt induces neurodegenerative damages through Pin1 inactivation in mice and human neuroglioma cells

Cobalt is a hazardous material that has harmful effects on neurotoxicity. Excessive exposure to cobalt or inactivation of the unique proline isomerase Pin1 contributes to age-dependent neurodegeneration. However, nothing is known about the role of Pin1 in cobalt-induced neurodegeneration. Here we find that out of several hazardous materials, only cobalt dose-dependently decreased Pin1 expression and alterations in its substrates, including cis and trans phosphorylated Tau in human neuronal cells, concomitant with neurotoxicity. Cobalt-induced neurotoxicity was aggravated by Pin1 genetic or chemical inhibition, but rescued by Pin1 upregulation. Furthermore, less than 4 μg/l of blood cobalt induced dose- and age-dependent Pin1 downregulation in murine brains, ensuing neurodegenerative changes. These defects were corroborated by changes in Pin1 substrates, including cis and trans phosphorylated Tau, amyloid precursor protein, β amyloid and GSK3β. Moreover, blood Pin1 was downregulated in human hip replacement patients with median blood cobalt level of 2.514 μg/l, which is significantly less than the safety threshold of 10 μg/l, suggesting an early role Pin1 played in neurodegenerative damages. Thus, Pin1 inactivation by cobalt contributes to age-dependent neurodegeneration, revealing that cobalt is a hazardous material triggering AD-like neurodegenerative damages.

Drp-1-Dependent Mitochondrial Fragmentation Contributes to Cobalt Chloride-Induced Toxicity in Caenorhabditis elegans

Excess cobalt may lead to metallosis, characterized by sensorineural hearing loss, visual, and cognitive impairment, and peripheral neuropathy. In the present study, we sought to address the molecular mechanisms of cobalt-induced neurotoxicity, using Caenorhabditis elegans as an experimental model. Exposure to cobalt chloride for 2 h significantly decreased the survival rate and lifespan in nematodes. Cobalt chloride exposure led to increased oxidative stress and upregulation of glutathione S-transferase 4. Consistently, its upstream regulator skn-1, a mammalian homolog of the nuclear factor erythroid 2-related factor 2, was activated. Among the mRNAs examined by quantitative real-time polymerase chain reactions, apoptotic activator egl-1, proapoptotic gene ced-9, autophagic (bec-1 and lgg-1), and mitochondrial fission regulator drp-1 were significantly upregulated upon cobalt exposure, concomitant with mitochondrial fragmentation, as determined by confocal microscopy. Moreover, drp-1 inhibition suppressed the cobalt chloride-induced reactive oxygen species generation, growth defects, and reduced mitochondrial fragmentation. Our novel findings suggest that the acute toxicity of cobalt is mediated by mitochondrial fragmentation and drp-1 upregulation.

An integrated benefit-risk assessment of cobalt-containing alloys used in medical devices: Implications for regulatory requirements in the European Union

In 2017, the European Union (EU) Committee for Risk Assessment (RAC) recommended the classification of metallic cobalt (Co) as Category 1B with respect to its carcinogenic and reproductive hazard potential and Category 2 for mutagenicity but did not evaluate the relevance of these classifications for patients exposed to Co-containing alloys (CoCA) used in medical devices. CoCA are inherently different materials from Co metal from a toxicological perspective and thus require a separate assessment. CoCA are biocompatible materials with a unique combination of properties including strength, durability, and a long history of safe use that make them uniquely suited for use in a wide-range of medical devices. Assessments were performed on relevant preclinical and clinical carcinogenicity and reproductive toxicity data for Co and CoCA to meet the requirements under the EU Medical Device Regulation triggered by the ECHA re-classification (adopted in October 2019 under the 14th Adaptation to Technical Progress to CLP) and to address their relevance to patient safety. The objective of this review is to present an integrated overview of these assessments, a benefit-risk assessment and an examination of potential alternative materials. The data support the conclusion that the exposure to CoCA in medical devices via clinically relevant routes does not represent a hazard for carcinogenicity or reproductive toxicity. Additionally, the risk for the adverse effects that are known to occur with elevated Co concentrations (e.g., cardiomyopathy) are very low for CoCA implant devices (infrequent reports often reflecting a unique catastrophic failure event out of millions of patients) and negligible for CoCA non-implant devices (not measurable/no case reports). In conclusion, the favorable benefit-risk profile also in relation to possible alternatives presented herein strongly support continued use of CoCA in medical devices.

Research progress on the carcinogenicity of metal nanomaterials

With the rapid development of nanotechnology, new nanomaterials with enormous potentials continue to emerge, especially metal nanomaterials. Metal nanomaterials possess the characteristics of metals and nanomaterials, so they are widely used in many fields. But at the same time, whether the use or release of metal nan4omaterials into the environment is toxic to human beings and animals has now attained widespread attention at home and abroad. Currently, it is an indisputable fact that cancer ranks among the top causes of death among residents worldwide. The properties of causing DNA damage and mutations possessed by these metal nanomaterials make them unpredictable influences in the body, subsequently leading to genotoxicity and carcinogenicity. Due to the increasing evidence of their roles in carcinogenicity, this article reviews the toxicological and carcinogenic effects of metal nanomaterials, including nano-metal elements (nickel nanoparticles, silver nanoparticles, and cobalt nanoparticles) and nano-metal oxides (titanium dioxide nanoparticles, silica nanoparticles, zinc oxide nanoparticles, and alumina nanoparticles). This article provides a reference for the researchers and policymakers to use metal nanomaterials rationally in modern industries and biomedicine.

Determination of protective effect of carob (Ceratonia siliqua L.) extract against cobalt(II) nitrate-induced toxicity

Cobalt (Co) is widely used in many industrial fields such as batteries and paints. Cobalt, a dangerous heavy metal, can be found in high concentrations in natural and human habitats. Although cobalt is an important micronutrient, it is toxic to living organisms when exposed to high amounts. Carob (Ceratonia siliqua L.) is a tree native to The Mediterranean region. Carob bean, which has high nutritional and economic value, is used against cardiovascular and gastrointestinal diseases. In addition, the antioxidant properties of carob are gaining importance in recent years. In this study, the protective effects of carob extract against the toxicity of cobalt on Allium cepa L. were investigated. For this purpose, 150 mg/L and 300 mg/L carob extract solutions and 5.5 mg/kg cobalt solutions were applied to A. cepa L. bulbs. Root emergence, weight gain, root elongation, and mitotic index (MI) decreased, while the frequency of chromosomal abnormalities (CAs) and micronucleus (MN) increased as a result of Co application. Furthermore, Co treatment triggered a noticeable rise in the activities of superoxide dismutase (SOD) and catalase (CAT) enzymes as well as the malondialdehyde (MDA) amount and the abnormalities in the meristematic cells. On the other hand, applications of carob extracts mitigated cobalt-induced damages in a dose-dependent manner in all parameters. Therefore, the current study showed that the strong preventive potential of carob extract against phytotoxicity and genotoxicity is caused by Co in a model plant. The protective effects of carob extract on Co-induced toxicity were demonstrated for the first time in terms of reducing genotoxicity and oxidative stress response.

The mutational signature profile of known and suspected human carcinogens in mice

Epidemiological studies have identified many environmental agents that appear to significantly increase cancer risk in human populations. By analyzing tumor genomes from mice chronically exposed to 1 of 20 known or suspected human carcinogens, we reveal that most agents do not generate distinct mutational signatures or increase mutation burden, with most mutations, including driver mutations, resulting from tissue-specific endogenous processes. We identify signatures resulting from exposure to cobalt and vinylidene chloride and link distinct human signatures (SBS19 and SBS42) with 1,2,3-trichloropropane, a haloalkane and pollutant of drinking water, and find these and other signatures in human tumor genomes. We define the cross-species genomic landscape of tumors induced by an important compendium of agents with relevance to human health.

Statistical Assessment of Toxic and Essential Metals in the Serum of Female Patients with Lung Carcinoma from Pakistan

Lung cancer (LC) is the number one cancer killer of women both in the USA and around the world. Besides cigarette smoking, an important feature in the etiology of LC is its strong association with exposure of toxic metals. The primary objective of the present investigation was to assess the concentrations of toxic/essential elements (Ni, Ca, Se, Zn, Co, K, Cr, As, Cu, Na, Fe, Hg, Cd, Mg, Mn, and Pb) in the serum samples of LC female patients with female controls by atomic absorption spectrometry after wet-acid digestion procedure. Carcinoembryonic antigen (CEA) was also measured in the serum of the patients using immunoradiometric method. Comparative appraisal of the data revealed that concentrations of Cr, Mg, Cd, Pb, Hg, As, and Ni were noted to be high significantly in serum of LC female patients, while the average Fe, Co, Mn, Na, K, Zn, Ca, and Se were observed at higher levels in female controls (p < 0.05). The correlation study revealed significantly different mutual associations among the elements in the both donor groups. Markedly, variations in the elemental levels were also noted for different types (non-small cell lung cancer and small cell lung cancer) and stages (I, II, III, & IV) of LC patients. Multivariate analyses showed substantially diverse apportionment of the metals in the female patients and female controls. Hence, present findings suggest that the toxic and essential metals accumulated in the body may pose a high risk for LC progression in Pakistani females.

Genotoxic properties of materials used for endoprostheses: Experimental and human data

Approximately 2 million endoprostheses are implanted annually and metal ions as well as particles are released into the body from the materials which are used. This review describes the results of studies concerning genotoxic damage caused by artificial joints. DNA damage leads to various adverse long-term health effects in humans including cancer. Experiments with mammalian cells showed that metal ions and particles from orthopedic materials cause DNA damage. Induction of chromosomal aberrations (CA) was found in several in vitro experiments and in studies with rodents with metals from orthopedic materials. Human studies focused mainly on induction of CA (7 studies). Only few investigations (4) concerned sister chromatid exchanges, oxidative DNA damage (2) and micronucleus formation (1). CA are a reliable biomarker for increased cancer risks in humans) and were increased in all studies in patients with artificial joints. No firm conclusion can be drawn at present if the effects in humans are due to oxidative stress and if dissolved metal ions or release particles play a role. Our findings indicate that patients with artificial joints may have increased cancer risks due to damage of the genetic material. Future studies should be performed to identify safe materials and to study the molecular mechanisms in detail.

The Influence of Co Additive on the Sintering, Mechanical Properties, Cytocompatibility, and Digital Light Processing Based Stereolithography of 3Y-TZP-5Al2O3 Ceramics

Nanocrystalline 3 mol% yttria-tetragonal zirconia polycrystal (3Y-TZP) ceramic powder containing 5 wt.% Al₂O₃ with 64 m²/g specific area was synthesized through precipitation method. Different amounts of Co (0-3 mol%) were introduced into synthesized powders, and ceramic materials were obtained by heat treatment in the air for 2 h at 1350-1550 °C. The influence of Co addition on the sintering temperature, phase composition, microstructure, mechanical and biomedical properties of the obtained composite materials, and on the resolution of the digital light processing (DLP) printed and sintered ceramic samples was investigated. The addition of a low amount of Co (0.33 mol%) allows us to decrease the sintering temperature, to improve the mechanical properties of ceramics, to preserve the nanoscale size of grains at 1350-1400 °C. The further increase of Co concentration resulted in the formation of both substitutional and interstitial sites in solid solution and appearance of CoAl₂O₄ confirmed by UV-visible spectroscopy, which stimulates grain growth. Due to the prevention of enlarging grains and to the formation of the dense microstructure in ceramic based on the tetragonal ZrO₂ and Al₂O₃ with 0.33 mol% Co the bending strength of 720 ± 33 MPa was obtained after sintering at 1400 °C. The obtained materials demonstrated the absence of cytotoxicity and good cytocompatibility. The formation of blue CoAl₂O₄ allows us to improve the resolution of DLP based stereolithographic printed green bodies and sintered samples of the ceramics based on ZrO₂-Al₂O₃. The developed materials and technology could be the basis for 3D manufacturing of bioceramic implants for medicine.

Cobalt-induced retrotransposon polymorphism and humic acid protection on maize genome

Retrotransposon activity and genomic template stability (GTS) are one of the most significant rearranging mechanisms in environmental stress. Therefore, in this study, it is aimed to elucidate effecting of Cobalt (Co) on the instability of genomes and Long Terminal Repeat retrotransposon polymorphism in Zea mays and whether humic acid (HA) has any role on these parameters. For this purpose, Retrotransposon-microsatellite amplified polymorphism (REMAP) and Inter-Retrotransposon Amplified Polymorphism (IRAP) markers were applied to evaluate retrotransposon polymorphism and the GTS levels. It was found that IRAP and REMAP primers generate unique polymorphic band structures on maize plants treated with various doses of Co. Retrotransposon polymorphism increased and GTS decreased while increasing Co concentration. On the other hand, there was a reduction in negative effects of Co on retrotransposon GTS and polymorphism after treatment with HA. The results indicate that HA may be used effectively for the protection of maize seedlings from the destructive effects of Co toxicity.

LiCoO2 particles used in Li-ion batteries induce primary mutagenicity in lung cells via their capacity to generate hydroxyl radicals

BACKGROUND

Li-ion batteries (LIB) are used in most portable electronics. Among a wide variety of materials, LiCoO₂ (LCO) is one of the most used for the cathode of LIB. LCO particles induce oxidative stress in mouse lungs due to their Co content, and have a strong inflammatory potential. In this study, we assessed the mutagenic potential of LCO particles in lung cells in comparison to another particulate material used in LIB, LTO (Li₄Ti₅O₁₂), which has a low inflammatory potential compared to LCO particles.

RESULTS

We assessed the mutagenic potential of LCO and LTO particles in vitro by performing a cytokinesis-block micronucleus (MN) assay with rat lung epithelial cells (RLE), as well as in vivo in alveolar type II epithelial (AT-II) cells. LCO particles induced MN in vitro at non-cytotoxic concentrations and in vivo at non-inflammatory doses, indicating a primary genotoxic mechanism. LTO particles did not induce MN. Electron paramagnetic resonance and terephthalate assays showed that LCO particles produce hydroxyl radicals (•OH). Catalase inhibits this •OH production. In an alkaline comet assay with the oxidative DNA damage repair enzyme human 8-oxoguanine DNA glycosylase 1, LCO particles induced DNA strand breaks and oxidative lesions. The addition of catalase reduced the frequency of MN induced by LCO particles in vitro.

CONCLUSIONS

We report the mutagenic activity of LCO particles used in LIB in vitro and in vivo. Our data support the role of Co(II) ions released from these particles in their primary genotoxic activity which includes the formation of •OH by a Fenton-like reaction, oxidative DNA lesions and strand breaks, thus leading to chromosomal breaks and the formation of MN. Documenting the genotoxic potential of the other LIB particles, especially those containing Co and/or Ni, is therefore needed to guarantee a safe and sustainable development of LIB.