Synchrony of cell spreading and contraction force as phagocytes engulf large pathogens

Massive field-of-view sub-cellular traction force videography enabled by Single-Pixel Optical Tracers (SPOT)

We report a massive field-of-view and high-speed videography platform for measuring the sub-cellular traction forces of more than 10,000 biological cells over 13 mm2 at 83 frames per second. Our Single-Pixel Optical Tracers (SPOT) tool uses 2-dimensional diffraction gratings embedded into a soft substrate to convert cells' mechanical traction force into optical colors detectable by a video camera. The platform measures the sub-cellular traction forces of diverse cell types, including tightly connected tissue sheets and near isolated cells. We used this platform to explore the mechanical wave propagation in a tightly connected sheet of Neonatal Rat Ventricular Myocytes (NRVMs) and discovered that the activation time of some tissue regions are heterogeneous from the overall spiral wave behavior of the cardiac wave.

Coupled mechanical mapping and interference contrast microscopy reveal viscoelastic and adhesion hallmarks of monocyte differentiation into macrophages

Monocytes activated by pro-inflammatory signals adhere to the vascular endothelium and migrate from the bloodstream to the tissue ultimately differentiating into macrophages. Cell mechanics and adhesion play a crucial role in macrophage functions during this inflammatory process. However, how monocytes change their adhesion and mechanical properties upon differentiation into macrophages is still not well understood. In this work, we used various tools to quantify the morphology, adhesion, and viscoelasticity of monocytes and differentiatted macrophages. Combination of atomic force microscopy (AFM) high resolution viscoelastic mapping with interference contrast microscopy (ICM) at the single-cell level revealed viscoelasticity and adhesion hallmarks during monocyte differentiation into macrophages. Quantitative holographic tomography imaging revealed a dramatic increase in cell volume and surface area during monocyte differentiation and the emergence of round and spread macrophage subpopulations. AFM viscoelastic mapping showed important stiffening (increase of the apparent Young's modulus, E₀) and solidification (decrease of cell fluidity, β) on differentiated cells that correlated with increased adhesion area. These changes were enhanced in macrophages with a spread phenotype. Remarkably, when adhesion was perturbed, differentiated macrophages remained stiffer and more solid-like than monocytes, suggesting a permanent reorganization of the cytoskeleton. We speculate that the stiffer and more solid-like microvilli and lamellipodia might help macrophages to minimize energy dissipation during mechanosensitive activities. Thus, our results revealed viscoelastic and adhesion hallmarks of monocyte differentiation that may be important for biological function.

Perspective: The viscoelastic properties of biofilm infections and mechanical interactions with phagocytic immune cells

Biofilms are viscoelastic materials that are a prominent public health problem and a cause of most chronic bacterial infections, in large part due to their resistance to clearance by the immune system. Viscoelastic materials combine both solid-like and fluid-like mechanics, and the viscoelastic properties of biofilms are an emergent property of the intercellular cohesion characterizing the biofilm state (planktonic bacteria do not have an equivalent property). However, how the mechanical properties of biofilms are related to the recalcitrant disease that they cause, specifically to their resistance to phagocytic clearance by the immune system, remains almost entirely unstudied. We believe this is an important gap that is ripe for a large range of investigations. Here we present an overview of what is known about biofilm infections and their interactions with the immune system, biofilm mechanics and their potential relationship with phagocytosis, and we give an illustrative example of one important biofilm-pathogen (Pseudomonas aeruginosa) which is the most-studied in this context. We hope to inspire investment and growth in this relatively-untapped field of research, which has the potential to reveal mechanical properties of biofilms as targets for therapeutics meant to enhance the efficacy of the immune system.

Engineering physical microenvironments to study innate immune cell biophysics

Innate immunity forms the core of the human body's defense system against infection, injury, and foreign objects. It aims to maintain homeostasis by promoting inflammation and then initiating tissue repair, but it can also lead to disease when dysregulated. Although innate immune cells respond to their physical microenvironment and carry out intrinsically mechanical actions such as migration and phagocytosis, we still do not have a complete biophysical description of innate immunity. Here, we review how engineering tools can be used to study innate immune cell biophysics. We first provide an overview of innate immunity from a biophysical perspective, review the biophysical factors that affect the innate immune system, and then explore innate immune cell biophysics in the context of migration, phagocytosis, and phenotype polarization. Throughout the review, we highlight how physical microenvironments can be designed to probe the innate immune system, discuss how biophysical insight gained from these studies can be used to generate a more comprehensive description of innate immunity, and briefly comment on how this insight could be used to develop mechanical immune biomarkers and immunomodulatory therapies.

Distinct timing of neutrophil spreading and stiffening during phagocytosis

Phagocytic cells form the first line of defense in an organism, engulfing microbial pathogens. Phagocytosis involves cell mechanical changes that are not yet well understood. Understanding these mechanical modifications promises to shed light on the immune processes that trigger pathological complications. Previous studies showed that phagocytes undergo a sequence of spreading events around their target followed by an increase in cell tension. Seemingly in contradiction, other studies observed an increase in cell tension concomitant with membrane expansion. Even though phagocytes are viscoelastic, few studies have quantified viscous changes during phagocytosis. It is also unclear whether cell lines behave mechanically similarly to primary neutrophils. We addressed the question of simultaneous versus sequential spreading and mechanical changes during phagocytosis by using immunoglobulin-G-coated 8- and 20-μm-diameter beads as targets. We used a micropipette-based single-cell rheometer to monitor viscoelastic properties during phagocytosis by both neutrophil-like PLB cells and primary human neutrophils. We show that the faster expansion of PLB cells on larger beads is a geometrical effect reflecting a constant advancing speed of the phagocytic cup. Cells become stiffer on 20- than on 8-μm beads, and the relative timing of spreading and stiffening of PLB cells depends on target size: on larger beads, stiffening starts before maximal spreading area is reached but ends after reaching maximal area. On smaller beads, the stiffness begins to increase after cells have engulfed the bead. Similar to PLB cells, primary cells become stiffer on larger beads but start spreading and stiffen faster, and the stiffening begins before the end of spreading on both bead sizes. Our results show that mechanical changes in phagocytes are not a direct consequence of cell spreading and that models of phagocytosis should be amended to account for causes of cell stiffening other than membrane expansion.

Rapid viscoelastic changes are a hallmark of early leukocyte activation

To accomplish their critical task of removing infected cells and fighting pathogens, leukocytes activate by forming specialized interfaces with other cells. The physics of this key immunological process are poorly understood, but it is important to understand them because leukocytes have been shown to react to their mechanical environment. Using an innovative micropipette rheometer, we show in three different types of leukocytes that, when stimulated by microbeads mimicking target cells, leukocytes become up to 10 times stiffer and more viscous. These mechanical changes start within seconds after contact and evolve rapidly over minutes. Remarkably, leukocyte elastic and viscous properties evolve in parallel, preserving a well-defined ratio that constitutes a mechanical signature specific to each cell type. Our results indicate that simultaneously tracking both elastic and viscous properties during an active cell process provides a new, to our knowledge, way to investigate cell mechanical processes. Our findings also suggest that dynamic immunomechanical measurements can help discriminate between leukocyte subtypes during activation.

High-Throughput Methods in the Discovery and Study of Biomaterials and Materiobiology

The complex interaction of cells with biomaterials (i.e., materiobiology) plays an increasingly pivotal role in the development of novel implants, biomedical devices, and tissue engineering scaffolds to treat diseases, aid in the restoration of bodily functions, construct healthy tissues, or regenerate diseased ones. However, the conventional approaches are incapable of screening the huge amount of potential material parameter combinations to identify the optimal cell responses and involve a combination of serendipity and many series of trial-and-error experiments. For advanced tissue engineering and regenerative medicine, highly efficient and complex bioanalysis platforms are expected to explore the complex interaction of cells with biomaterials using combinatorial approaches that offer desired complex microenvironments during healing, development, and homeostasis. In this review, we first introduce materiobiology and its high-throughput screening (HTS). Then we present an in-depth of the recent progress of 2D/3D HTS platforms (i.e., gradient and microarray) in the principle, preparation, screening for materiobiology, and combination with other advanced technologies. The Compendium for Biomaterial Transcriptomics and high content imaging, computational simulations, and their translation toward commercial and clinical uses are highlighted. In the final section, current challenges and future perspectives are discussed. High-throughput experimentation within the field of materiobiology enables the elucidation of the relationships between biomaterial properties and biological behavior and thereby serves as a potential tool for accelerating the development of high-performance biomaterials.

Enhanced protein phosphorylation in Apostichopus japonicus intestine triggered by tussah immunoreactive substances might be involved in the regulation of immune-related signaling pathways

The sea cucumber Apostichopus japonicus is an economically important species owing to its high nutritive and medicinal value. In order to avoid the pollution resulting from the overuse of antibiotics in A. japonicus aquaculture, various immunostimulants have been used as an alternative to improve the efficiency of A. japonicus farming. Our previous proteomic investigation has shown that several proteins participating in the immune-related physiology of A. japonicus were differentially expressed in the intestinal tissue in response to tussah immunoreactive substances (TIS). This study further explored the immunostimulation mechanism of TIS in A. japonicus. Phosphoproteomics technology was used to investigate the effect of TIS on protein phosphorylation in the intestine of A. japonicus following feeding with a TIS-supplemented diet. A total of 213 unique phosphoproteins were detected from 225 unique phosphopeptides. KEGG pathway analysis showed that majority of the phosphoproteins are involved in endocytosis, carbon metabolism and spliceosome functional group. Sixteen of the phosphoproteins exhibited differential phosphorylation in response to TIS and 12 of these were found to associate with biological functions. Of these 12 phosphoproteins, eight exhibited enhanced phosphorylation while four displayed reduced phosphorylation. These 12 proteins were further analyzed and all were found to play a role in regulating some aspects of the immune system and the growth of sea cucumbers, especially in phagocytosis, energy metabolism and disease resistance. The findings of this study could therefore shed new light on the immune pathways of sea cucumber that are affected by TIS. This could help us to better understand the underlying mechanism linked to the immunoenhancement of A. japonicus in response to TIS, one that is associated with the change in protein phosphorylation.

Force Measurement of Living Professional Phagocytes of the Immune System

In higher organisms, the professional phagocytes of the immune system (dendritic cells, neutrophils, monocytes, and macrophages) are responsible for pathogen clearance, the development of immune responses via cytokine secretion and presentation of antigens derived from internalized material, and the normal turnover and remodelling of tissues and disposal of dead cells. These functions rely on the ability of phagocytes to migrate and adhere to sites of infection, dynamically probe their environments to make contact with phagocytic targets, and perform phagocytosis, a mechanism of internalization of large particles, microorganisms, and cellular debris for intracellular degradation. The cell-generated forces that are necessary for the professional phagocytes to act in their roles as ‘first responders’ of the immune system have been the subject of mechanical studies in recent years. Methods of force measurement such as atomic force microscopy, traction force microscopy, micropipette aspiration, magnetic and optical tweezers, and exciting new variants of these have accompanied classical biological methods to perform mechanical investigations of these highly dynamic immune cells.

Assaying How Phagocytic Success Depends on the Elasticity of a Large Target Structure

Biofilm infections can consist of bacterial aggregates that are an order of magnitude larger than neutrophils, phagocytic immune cells that densely surround aggregates but do not enter them. Because a neutrophil is too small to engulf the entire aggregate, it must be able to detach and engulf a few bacteria at a time if it is to use phagocytosis to clear the infection. Current research techniques do not provide a method for determining how the success of phagocytosis, here defined as the complete engulfment of a piece of foreign material, depends on the mechanical properties of a larger object from which the piece must be removed before being engulfed. This article presents a step toward such a method. By varying polymer concentration or cross-linking density, the elastic moduli of centimeter-sized gels are varied over the range that was previously measured for Pseudomonas aeruginosa biofilms grown from clinical bacterial isolates. Human neutrophils are isolated from blood freshly drawn from healthy adult volunteers, exposed to gel containing embedded beads for 1 h, and removed from the gel. The percentage of collected neutrophils that contain beads that had previously been within the gels is used to measure successful phagocytic engulfment. Both increased polymer concentration in agarose gels and increased cross-linking density in alginate gels are associated with a decreased success of phagocytic engulfment. Upon plotting the percentage of neutrophils showing successful engulfment as a function of the elastic modulus of the gel to which they were applied, it is found that data from both alginate and agarose gels collapse onto the same curve. This suggests that gel mechanics may be impacting the success of phagocytosis and demonstrates that this experiment is a step toward realizing methods for measuring how the mechanics of a large target, or a large structure in which smaller targets are embedded, impact the success of phagocytic engulfment.

Neutrophil Cell Shape Change: Mechanism and Signalling during Cell Spreading and Phagocytosis

Perhaps the most important feature of neutrophils is their ability to rapidly change shape. In the bloodstream, the neutrophils circulate as almost spherical cells, with the ability to deform in order to pass along narrower capillaries. Upon receiving the signal to extravasate, they are able to transform their morphology and flatten onto the endothelium surface. This transition, from a spherical to a flattened morphology, is the first key step which neutrophils undergo before moving out of the blood and into the extravascular tissue space. Once they have migrated through tissues towards sites of infection, neutrophils carry out their primary role-killing infecting microbes by performing phagocytosis and producing toxic reactive oxygen species within the microbe-containing phagosome. Phagocytosis involves the second key morphology change that neutrophils undergo, with the formation of pseudopodia which capture the microbe within an internal vesicle. Both the spherical to flattened stage and the phagocytic capture stage are rapid, each being completed within 100 s. Knowing how these rapid cell shape changes occur in neutrophils is thus fundamental to understanding neutrophil behaviour. This article will discuss advances in our current knowledge of this process, and also identify an important regulated molecular event which may represent an important target for anti-inflammatory therapy.

Membrane-cytoskeletal crosstalk mediated by myosin-I regulates adhesion turnover during phagocytosis

Phagocytosis of invading pathogens or cellular debris requires a dramatic change in cell shape driven by actin polymerization. For antibody-covered targets, phagocytosis is thought to proceed through the sequential engagement of Fc-receptors on the phagocyte with antibodies on the target surface, leading to the extension and closure of the phagocytic cup around the target. We find that two actin-dependent molecular motors, class 1 myosins myosin 1e and myosin 1f, are specifically localized to Fc-receptor adhesions and required for efficient phagocytosis of antibody-opsonized targets. Using primary macrophages lacking both myosin 1e and myosin 1f, we find that without the actin-membrane linkage mediated by these myosins, the organization of individual adhesions is compromised, leading to excessive actin polymerization, slower adhesion turnover, and deficient phagocytic internalization. This work identifies a role for class 1 myosins in coordinated adhesion turnover during phagocytosis and supports a mechanism involving membrane-cytoskeletal crosstalk for phagocytic cup closure.

Elastomeric sensor surfaces for high-throughput single-cell force cytometry

As cells with aberrant force-generating phenotypes can directly lead to disease, cellular force-generation mechanisms are high-value targets for new therapies. Here, we show that single-cell force sensors embedded in elastomers enable single-cell force measurements with ~100-fold improvement in throughput than was previously possible. The microtechnology is scalable and seamlessly integrates with the multi-well plate format, enabling highly parallelized time-course studies. In this regard, we show that airway smooth muscle cells isolated from fatally asthmatic patients have innately greater and faster force-generation capacity in response to stimulation than healthy control cells. By simultaneously tracing agonist-induced calcium flux and contractility in the same cell, we show that the calcium level is ultimately a poor quantitative predictor of cellular force generation. Finally, by quantifying phagocytic forces in thousands of individual human macrophages, we show that force initiation is a digital response (rather than a proportional one) to the proper immunogen. By combining mechanobiology at the single-cell level with high-throughput capabilities, this microtechnology can support drug-discovery efforts for clinical conditions associated with aberrant cellular force generation.

FLECS Technology for High-Throughput Single-Cell Force Biology and Screening

Dr. Ivan Pushkarsky from the Department of Bioengineering at UCLA and Forcyte Biotechnologies, Inc. was awarded The President's Innovation Award at the Annual Society of Biomolecular Imaging and Informatics meeting held in San Diego, September 2017. All cell types produce mechanical forces to serve important physiological roles. Since aberrant force-generating phenotypes directly lead to disease, cellular force-generation mechanisms are high-value targets for new therapies. Despite knowledge of their significance in disease, drug developers have had limited access to force-generating cellular phenotypes, especially in the context of high-throughput screening. To serve this valuable need, we have developed a platform microtechnology called "FLECS" that can acquire robust contractility data from 1000s of uniformly patterned single cells simultaneously and seamlessly integrates with the 96- and 384-well plate formats to facilitate large-scale drug screens. This perspective discusses the challenges facing existing laboratory methods for measuring cellular force in the context of drug discovery. It then provides an overview of the FLECS platform, describes how it was designed to overcome many of these challenges, and discusses some exciting work already accomplished with FLECS. It concludes by highlighting the platform nature of the technology and the potential value that it promises for a myriad of drug development efforts.

Human Astrocytes Transfer Aggregated Alpha-Synuclein via Tunneling Nanotubes

Many lines of evidence suggest that the Parkinson's disease (PD)-related protein α-synuclein (α-SYN) can propagate from cell to cell in a prion-like manner. However, the cellular mechanisms behind the spreading remain elusive. Here, we show that human astrocytes derived from embryonic stem cells actively transfer aggregated α-SYN to nearby astrocytes via direct contact and tunneling nanotubes (TNTs). Failure in the astrocytes' lysosomal digestion of excess α-SYN oligomers results in α-SYN deposits in the trans-Golgi network followed by endoplasmic reticulum swelling and mitochondrial disturbances. The stressed astrocytes respond by conspicuously sending out TNTs, enabling intercellular transfer of α-SYN to healthy astrocytes, which in return deliver mitochondria, indicating a TNT-mediated rescue mechanism. Using a pharmacological approach to inhibit TNT formation, we abolished the transfer of both α-SYN and mitochondria. Together, our results highlight the role of astrocytes in α-SYN cell-to-cell transfer, identifying possible pathophysiological events in the PD brain that could be of therapeutic relevance.

SIGNIFICANCE STATEMENT Astrocytes are the major cell type in the brain, yet their role in Parkinson's disease progression remains elusive. Here, we show that human astrocytes actively transfer aggregated α-synuclein (α-SYN) to healthy astrocytes via direct contact and tunneling nanotubes (TNTs), rather than degrade it. The astrocytes engulf large amounts of oligomeric α-SYN that are subsequently stored in the trans-Golgi network region. The accumulation of α-SYN in the astrocytes affects their lysosomal machinery and induces mitochondrial damage. The stressed astrocytes respond by sending out TNTs, enabling intercellular transfer of α-SYN to healthy astrocytes. Our findings highlight an unexpected role of astrocytes in the propagation of α-SYN pathology via TNTs, revealing astrocytes as a potential target for therapeutic intervention.

Micropipette force probe to quantify single-cell force generation: application to T-cell activation

We describe the micropipette force probe, a novel technique that uses a micropipette as a flexible cantilever that aspirates a coated microbead and brings it into contact with a cell. We apply the technique to quantify mechanical and morphological events occurring during T-cell activation.

In response to engagement of surface molecules, cells generate active forces that regulate many cellular processes. Developing tools that permit gathering mechanical and morphological information on these forces is of the utmost importance. Here we describe a new technique, the micropipette force probe, that uses a micropipette as a flexible cantilever that can aspirate at its tip a bead that is coated with molecules of interest and is brought in contact with the cell. This technique simultaneously allows tracking the resulting changes in cell morphology and mechanics as well as measuring the forces generated by the cell. To illustrate the power of this technique, we applied it to the study of human primary T lymphocytes (T-cells). It allowed the fine monitoring of pushing and pulling forces generated by T-cells in response to various activating antibodies and bending stiffness of the micropipette. We further dissected the sequence of mechanical and morphological events occurring during T-cell activation to model force generation and to reveal heterogeneity in the cell population studied. We also report the first measurement of the changes in Young’s modulus of T-cells during their activation, showing that T-cells stiffen within the first minutes of the activation process.

How Tissue Mechanical Properties Affect Enteric Neural Crest Cell Migration

Neural crest cells (NCCs) are a population of multipotent cells that migrate extensively during vertebrate development. Alterations to neural crest ontogenesis cause several diseases, including cancers and congenital defects, such as Hirschprung disease, which results from incomplete colonization of the colon by enteric NCCs (ENCCs). We investigated the influence of the stiffness and structure of the environment on ENCC migration in vitro and during colonization of the gastrointestinal tract in chicken and mouse embryos. We showed using tensile stretching and atomic force microscopy (AFM) that the mesenchyme of the gut was initially soft but gradually stiffened during the period of ENCC colonization. Second-harmonic generation (SHG) microscopy revealed that this stiffening was associated with a gradual organization and enrichment of collagen fibers in the developing gut. Ex-vivo 2D cell migration assays showed that ENCCs migrated on substrates with very low levels of stiffness. In 3D collagen gels, the speed of the ENCC migratory front decreased with increasing gel stiffness, whereas no correlation was found between porosity and ENCC migration behavior. Metalloprotease inhibition experiments showed that ENCCs actively degraded collagen in order to progress. These results shed light on the role of the mechanical properties of tissues in ENCC migration during development.

Plasma membrane tension orchestrates membrane trafficking, cytoskeletal remodeling, and biochemical signaling during phagocytosis

Phagocytes clear the body of undesirable particles such as infectious agents and debris. To extend pseudopods over the surface of targeted particles during engulfment, cells must change shape through extensive membrane and cytoskeleton remodeling. We observed that pseudopod extension occurred in two phases. In the first phase, pseudopods extended rapidly, with actin polymerization pushing the plasma membrane forward. The second phase occurred once the membrane area from preexisting reservoirs was depleted, leading to increased membrane tension. Increased tension directly altered the small Rho GTPase Rac1, 3'-phosphoinositide, and cytoskeletal organization. Furthermore, it activated exocytosis of vesicles containing GPI-anchored proteins, increasing membrane area and phagocytosis efficiency for large particles. We thus propose that, during phagocytosis, membrane remodeling, cytoskeletal organization, and biochemical signaling are orchestrated by the mechanical signal of membrane tension. These results put a simple mechanical signal at the heart of understanding immunological responses.

A method for time-resolved measurements of the mechanics of phagocytic cups

The internalization of matter by phagocytosis is of key importance in the defence against bacterial pathogens and in the control of cancerous tumour growth. Despite the fact that phagocytosis is an inherently mechanical process, little is known about the forces and energies that a cell requires for internalization. Here, we use functionalized magnetic particles as phagocytic targets and track their motion while actuating them in an oscillating magnetic field, in order to measure the translational and rotational stiffnesses of the phagocytic cup as a function of time. The measured evolution of stiffness reveals a characteristic pattern with a pronounced peak preceding the finalization of uptake. The measured stiffness values and their time dependence can be interpreted with a model that describes the phagocytic cup as a prestressed membrane connected to an elastically deformable actin cortex. In the context of this model, the stiffness peak is a direct manifestation of a previously described mechanical bottleneck, and a comparison of model and data suggests that the membrane advances around the particle at a speed of about 20 nm s(-1). This approach is a novel way of measuring the progression of emerging phagocytic cups and their mechanical properties in situ and in real time.

Contemporaneous cell spreading and phagocytosis: magneto-resistive real-time monitoring of membrane competing processes

Adhesion and spreading of cells strongly depend on the properties of the underlying surface, which has significant consequences in long-term cell behavior adaption. This relationship is important for the understanding of both biological functions and their bioactivity in disease-related applications. Employing our magnetic lab-on-a-chip system, we present magnetoresistive-based real-time and label-free detection of cellular phagocytosis behavior during their spreading process on particle-immobilized sensor surfaces. Cell spreading experiments carried out on particle-free and particle-modified surfaces reveal a delay in spreading rate after an elapsed time of about 2.2h for particle-modified surfaces due to contemporaneous cell membrane loss by particle phagocytosis. Our associated magnetoresistive measurements show a high uptake rate at early stages of cell spreading, which decreases steadily until it reaches saturation after an average elapsed time of about 100 min. The corresponding cellular average uptake rate during the entire cell spreading process accounts for three particles per minute. This result represents a four times higher phagocytosis efficiency compared to uptake experiments carried out for confluently grown cells, in which case cell spreading is already finished and, thus, excluded. Furthermore, other dynamic cell-surface interactions at nano-scale level such as cell migration or the dynamics of cell attachment and detachment are also addressable by our magnetic lab-on-a-chip approach.

Blurred line between chemotactic chase and phagocytic consumption: an immunophysical single-cell perspective

An innate immune cell can sense a pathogen, either from a distance by recognizing chemoattractant stimuli or by direct physical contact. The pathogen is subsequently neutralized, which usually occurs through its phagocytic internalization. By investigating chemotaxis and phagocytosis from an immunophysical single-cell perspective, it now appears that the demarcation between these two processes is less distinct than originally thought. Several lines of evidence support this notion. First, chemotactic stimulation does not cease at the moment of initial contact between the cell and the pathogenic target. Second, even when classical chemotaxis of neutrophils is suppressed, the early cell response to contact with typical chemoattractant targets, such as zymosan, fungal spores or chemokine-coated particles, can still involve morphological attributes of chemotaxis. Recognizing that the changing morphology of motile cells is inextricably linked to physical cell behavior, this Commentary focuses on the mechanical aspects of the early response of innate immune cells to chemotactic and phagocytic stimuli. On the basis of this perspective, we propose that the combined study of chemotaxis and phagocytosis will, potentially, not only advance our grasp of the mechanisms underlying immune-cell motility but also open new lines of research that will promote a deeper understanding of the innate recognition of pathogens.

Actin switches in phagocytosis

Exposure of phagocytes to non-spherical particles has provided evidence for multiple actions of the actin system in force generation. For the uptake of long cylindrical particles, a "motile actin clamp" mechanism is proposed. When a phagocyte is engaged with an hour-glass-shaped particle, it exerts contractile activity alternatively at the far end of the particle or at its concave region. Phagocytes can switch within seconds between these different strategies of taking up a particle. This response switching is based on reprogramming the pattern of actin polymerization and depolymerization. The choice between different strategies of interaction with a particle increases the probability of engulfing the entire particle or at least a portion of it. Finally, a switch to actin disassembly enables a phagocyte to release a particle that turns out to be too big to be enclosed.

Force generation upon T cell receptor engagement

T cells are major players of adaptive immune response in mammals. Recognition of an antigenic peptide in association with the major histocompatibility complex at the surface of an antigen presenting cell (APC) is a specific and sensitive process whose mechanism is not fully understood. The potential contribution of mechanical forces in the T cell activation process is increasingly debated, although these forces are scarcely defined and hold only limited experimental evidence. In this work, we have implemented a biomembrane force probe (BFP) setup and a model APC to explore the nature and the characteristics of the mechanical forces potentially generated upon engagement of the T cell receptor (TCR) and/or lymphocyte function-associated antigen-1 (LFA-1). We show that upon contact with a model APC coated with antibodies towards TCR-CD3, after a short latency, the T cell developed a timed sequence of pushing and pulling forces against its target. These processes were defined by their initial constant growth velocity and loading rate (force increase per unit of time). LFA-1 engagement together with TCR-CD3 reduced the growing speed during the pushing phase without triggering the same mechanical behavior when engaged alone. Intracellular Ca(2+) concentration ([Ca(2+)](i)) was monitored simultaneously to verify the cell commitment in the activation process. [Ca(2+)](i) increased a few tens of seconds after the beginning of the pushing phase although no strong correlation appeared between the two events. The pushing phase was driven by actin polymerization. Tuning the BFP mechanical properties, we could show that the loading rate during the pulling phase increased with the target stiffness. This indicated that a mechanosensing mechanism is implemented in the early steps of the activation process. We provide here the first quantified description of force generation sequence upon local bidimensional engagement of TCR-CD3 and discuss its potential role in a T cell mechanically-regulated activation process.

Curvature recognition and force generation in phagocytosis

BACKGROUND

The uptake of particles by actin-powered invagination of the plasma membrane is common to protozoa and to phagocytes involved in the immune response of higher organisms. The question addressed here is how a phagocyte may use geometric cues to optimize force generation for the uptake of a particle. We survey mechanisms that enable a phagocyte to remodel actin organization in response to particles of complex shape.

RESULTS

Using particles that consist of two lobes separated by a neck, we found that Dictyostelium cells transmit signals concerning the curvature of a surface to the actin system underlying the plasma membrane. Force applied to a concave region can divide a particle in two, allowing engulfment of the portion first encountered. The phagosome membrane that is bent around the concave region is marked by a protein containing an inverse Bin-Amphiphysin-Rvs (I-BAR) domain in combination with an Src homology (SH3) domain, similar to mammalian insulin receptor tyrosine kinase substrate p53. Regulatory proteins enable the phagocyte to switch activities within seconds in response to particle shape. Ras, an inducer of actin polymerization, is activated along the cup surface. Coronin, which limits the lifetime of actin structures, is reversibly recruited to the cup, reflecting a program of actin depolymerization. The various forms of myosin-I are candidate motor proteins for force generation in particle uptake, whereas myosin-II is engaged only in retracting a phagocytic cup after a switch to particle release. Thus, the constriction of a phagocytic cup differs from the contraction of a cleavage furrow in mitosis.

CONCLUSIONS

Phagocytes scan a particle surface for convex and concave regions. By modulating the spatiotemporal pattern of actin organization, they are capable of switching between different modes of interaction with a particle, either arresting at a concave region and applying force in an attempt to sever the particle there, or extending the cup along the particle surface to identify the very end of the object to be ingested. Our data illustrate the flexibility of regulatory mechanisms that are at the phagocyte's disposal in exploring an environment of irregular geometry.

Prestress and adhesion site dynamics control cell sensitivity to extracellular stiffness

This study aims at improving the understanding of mechanisms responsible for cell sensitivity to extracellular environment. We explain how substrate mechanical properties can modulate the force regulation of cell sensitive elements primarily adhesion sites. We present a theoretical and experimental comparison between two radically different approaches of the force regulation of adhesion sites that depends on their either stationary or dynamic behavior. The most classical stationary model fails to predict cell sensitivity to substrate stiffness whereas the dynamic model predicts extracellular stiffness dependence. This is due to a time dependent reaction force in response to actomyosin traction force exerted on cell sensitive elements. We purposely used two cellular models, i.e., alveolar epithelial cells and alveolar macrophages exhibiting respectively stationary and dynamic adhesion sites, and compared their sensitivity to theoretical predictions. Mechanical and structural results show that alveolar epithelial cells exhibit significant prestress supported by evident stress fibers and lacks sensitivity to substrate stiffness. On the other hand, alveolar macrophages exhibit low prestress and exhibit sensitivity to substrate stiffness. Altogether, theory and experiments consistently show that adhesion site dynamics and cytoskeleton prestress control cell sensitivity to extracellular environment with an optimal sensitivity expected in the intermediate range.

Life and times of a cellular bleb

Blebs are spherical cellular protrusions that occur in many physiological situations. Two distinct phases make up the life of a bleb, each of which have their own biology and physics: expansion, which lasts approximately 30 s, and retraction, which lasts approximately 2 min. We investigate these phases using optical microscopy and simple theoretical concepts, seeking information on blebbing itself, and on cytomechanics in general. We show that bleb nucleation depends on pressure, membrane-cortex adhesion energy, and membrane tension, and test this experimentally. Bleb growth occurs through a combination of bulk flow of lipids and delamination from the cell cortex via the formation and propagation of tears. In extreme cases, this can give rise to a traveling wave around the cell periphery, known as "circus movement." When growth stalls, an actin cortex reforms under the bleb membrane, and retraction starts, driven by myosin-II. Using flicker spectroscopy, we find that retracting blebs are fivefold more rigid than expanding blebs, an increase entirely explained by the properties of the newly formed cortical actin mesh. Finally, using artificially nucleated blebs as pressure sensors, we show that cells rounded up in mitosis possess a substantial intracellular pressure.

Leukocyte membrane "expansion": a central mechanism for leukocyte extravasation

The infiltration of inflamed tissues by leukocytes is a key event in the development and progression of inflammation. Although individual cytokines, which coordinate extravasation, have become the targets for therapy, a mechanism that is common to white cell extravasation, regardless of the specific molecular mechanism involved, would represent a more attractive therapeutic target. Such a target may be represented by the events underlying the spreading of leukocytes on the endothelium, which is a necessary prelude to extravasation. This leukocyte "spreading" involves an apparent increase in the cell surface area. The aim of this review is to examine whether the mechanism underlying the apparent expansion of plasma membrane surface area during leukocyte extravasation could be an "Achilles' heel," which is amenable to therapeutic intervention. In this short review, we evaluate the models proposed for the mechanism of membrane "expansion" and discuss recent data, which point to a mechanism of membrane "unwrinkling." The molecular pathway for the unwrinkling of the leukocyte plasma membrane may involve Ca2+ activation of mu-calpain and cleavage of cytoskeletal linkage molecules such as talin and ezrin. This route could be common to all extravasation signals and thus, represents a potential target for anti-inflammatory therapy.

Neutrophil traction stresses are concentrated in the uropod during migration

We find that in contrast to strongly adherent, slow moving cells such as fibroblasts, neutrophils exert contractile stresses largely in the rear of the cell (uropod) relative to the direction of motion. Rather than the leading edge pulling the cell, the rear is both anchoring the cell and the area in which the contractile forces are concentrated. These tractions rapidly reorient themselves during a turn, on a timescale of seconds to minutes, and their repositioning precedes and sets the direction of motion during a turn. We find the total average root mean-squared traction force to be 28+/-10 nN during chemokinesis, and 67+/-10 nN during chemotaxis. We hypothesize that the contraction forces in the back of the neutrophil not only break uropodial adhesive contacts but also create a rearward squeezing contractility, as seen in amoeboid or amoeboidlike cells and the formation of blebs in cells, causing a flow of intracellular material to the fluidlike lamellipod. Our findings suggest an entirely new model of neutrophil locomotion.

Micromechanics of filopodia mediated capture of pathogens by macrophages

The biological function of filopodia has been extensively studied while only little work has been done on their mechanical properties. In the present study, we apply magnetic microbeads to explore the capturing and initial step of phagocytosis of pathogens by macrophages through filopodia. Microbeads were covered by the bacterial coat protein invasin which is known to trigger the invasion of the intestine by the bacteria Yersinia enterocolitica. These mimetics of bacteria were placed in the vicinity of J774 mouse macrophages exhibiting long filopodia. The specific adhesion of beads to the tip of a filopodium induced the retraction of the protrusion resulting in the dragging of the bead towards the cell body. The dynamics of the retraction process was analyzed by following the in-plane motion of the bead. We estimated the minimal force developed by filopodia and compared the results with previous magnetic tweezer studies of mechanical force induced growth of protrusions (Vonna et al. 2003). We show that very thin filopodia can generate astonishingly large retraction forces over large distances (>10 microm) and can act as an efficient mechanical tool to detach pathogens adhering on surfaces.

Membrane mobility and clustering of Integrin Associated Protein (IAP, CD47)--major differences between mouse and man and implications for signaling

Integrin Associated Protein (IAP, CD47) is a ubiquitous integral membrane protein implicated in processes (in mice) that range from inhibiting clearance by phagocytes [Oldenborg et al., Science 2000; Gardai et al., Cell 2005] to neutrophil motility [Lindberg et al., Science 1996]. SIRPalpha is CD47's main receptor on phagocytes plus a number of other cell types, and SIRPalpha-CD47 interactions in clusters are believed to mediate signaling. However, considerable species differences in CD47 sequence as well as differences in CD47 extractability from mouse cells versus man motivate a characterization of mobility, clusterability, and kinetics under force of CD47-SIRPalpha. Despite similar levels of CD47 on red cells from mouse and man, we find an effective avidity of SIRPalpha-CD47 for mouse appears higher than for human. Both mouse and human CD47 show clustering by multivalent SIRPalpha complexes, but only mouse cells aggregate with CD47 concentrating at cell-cell contacts. This proves consistent with fluorescence imaged micro-deformation, which indicates near-complete mobility of CD47 on mouse cells compared to only about 30-40% mobility on normal human cells. To qualify the method, we also show that disrupting cellular F-actin dramatically increases the mobility of integral membrane proteins. Furthermore, atomic force microscopy probing of cell membranes with human SIRPalpha confirms the species-specific interactions and provides evidence of clustering and adhesion on short time scales, but it also shows surprisingly strong forces in detachment for a signaling complex. The results thus highlight major species differences in CD47-SIRPalpha interactions and CD47 integration, suggesting that signaling by CD47 in man may be qualitatively different from mouse.

Mechanics of neutrophil phagocytosis: experiments and quantitative models

To quantitatively characterize the mechanical processes that drive phagocytosis, we observed the FcγR-driven engulfment of antibody-coated beads of diameters 3 μm to 11 μm by initially spherical neutrophils. In particular, the time course of cell morphology, of bead motion and of cortical tension were determined. Here, we introduce a number of mechanistic models for phagocytosis and test their validity by comparing the experimental data with finite element computations for multiple bead sizes. We find that the optimal models involve two key mechanical interactions: a repulsion or pressure between cytoskeleton and free membrane that drives protrusion, and an attraction between cytoskeleton and membrane newly adherent to the bead that flattens the cell into a thin lamella. Other models such as cytoskeletal expansion or swelling appear to be ruled out as main drivers of phagocytosis because of the characteristics of bead motion during engulfment. We finally show that the protrusive force necessary for the engulfment of large beads points towards storage of strain energy in the cytoskeleton over a large distance from the leading edge (∼0.5 μm), and that the flattening force can plausibly be generated by the known concentrations of unconventional myosins at the leading edge.

Prestressed F-actin networks cross-linked by hinged filamins replicate mechanical properties of cells

We show that actin filaments, shortened to physiological lengths by gelsolin and cross-linked with recombinant human filamins (FLNs), exhibit dynamic elastic properties similar to those reported for live cells. To achieve elasticity values of comparable magnitude to those of cells, the in vitro network must be subjected to external prestress, which directly controls network elasticity. A molecular requirement for the strain-related behavior at physiological conditions is a flexible hinge found in FLNa and some FLNb molecules. Basic physical properties of the in vitro filamin-F-actin network replicate the essential mechanical properties of living cells. This physical behavior could accommodate passive deformation and internal organelle trafficking at low strains yet resist externally or internally generated high shear forces.

Tissue cells feel and respond to the stiffness of their substrate

Normal tissue cells are generally not viable when suspended in a fluid and are therefore said to be anchorage dependent. Such cells must adhere to a solid, but a solid can be as rigid as glass or softer than a baby's skin. The behavior of some cells on soft materials is characteristic of important phenotypes; for example, cell growth on soft agar gels is used to identify cancer cells. However, an understanding of how tissue cells-including fibroblasts, myocytes, neurons, and other cell types-sense matrix stiffness is just emerging with quantitative studies of cells adhering to gels (or to other cells) with which elasticity can be tuned to approximate that of tissues. Key roles in molecular pathways are played by adhesion complexes and the actinmyosin cytoskeleton, whose contractile forces are transmitted through transcellular structures. The feedback of local matrix stiffness on cell state likely has important implications for development, differentiation, disease, and regeneration.

Active microrheology of networks composed of semiflexible polymers: computer simulation of magnetic tweezers

We have simulated the motion of a bead subjected to a constant force while embedded in a network of semiflexible polymers which can represent actin filaments. We find that the bead displacement obeys the power law x approximately t(alpha). After the initial stage characterized by the exponent alpha1 approximately 0.75, we find a different regime with alpha2 approximately 0.5. The response in this regime is linear in force and scales with the polymer concentration as c(-1.4). We find that the polymers pile up ahead of the moving bead, while behind it the polymer density is reduced. We show that the force resisting the bead motion is due to steric repulsion exerted by the polymers on the front hemisphere of the bead.

Protrusion force transmission of amoeboid cells crawling on soft biological tissue

We applied a colloidal force microscopy technique to measure the spreading and retraction forces generated by protrusions (pseudopodia) of vegetative amoeboid cells (Dictyostelium discoideum) adhering on soft tissue analogues composed of 2-mm thick hydrogels of hyaluronic acid exhibiting Young's moduli between 10 and 200 Pa. Local shear deformations of the polymer films evoked by magnetic tweezers and by cellular protrusions were determined by analyzing the deflections of colloidal beads randomly deposited on the surface of the polymer cushions, which enabled us to measure forces generated by advancing ("pushing" forces) and retracting ("pulling" forces) protrusions in a direct way. We found that the maximum amplitudes generated by the advancing protrusions (pushes) decrease with increasing stiffness of the HA substrate while the amplitudes of the retractions do not show such a dependence. The maximum forces transmitted by the advancing and retracting protrusions increase with increasing stiffness of the HA films (from 0.02 to 1 nN for the case of pushing). The protrusions spread or retract with constant velocities which are higher for retractions (100 nm s(-1)) than for spreadings (50 nm s(-1)) and are not significantly influenced by the substrate rigidity. We provide evidence that elastic equilibrium during protrusion formation and retraction is maintained by local elastic dipole fields generated at the rim of the protrusions. A model of protrusion force transmission by coupling of growing actin gel in the cytoplasm of the protrusions to cell surface receptors through talin clutches is proposed.

Mechanics of neutrophil phagocytosis: behavior of the cortical tension

The mechanical implementation of phagocytosis requires a well-coordinated deployment of cytoplasm and membrane during the creation of a phagosome. We follow the time course of this process in initially round passive neutrophils presented with antibody-coated beads of radii 1.1 to 5.5 microm. In particular, we monitor the cortical tension as the apparent cellular surface area increases due to cell-driven deformations induced by phagocytosis. The behavior of the tension is then compared with conditions of similar area expansion caused by externally imposed deformations during cell aspiration into a micropipette. Whereas the resting tension remains low for an area expansion of up to only 30% during aspiration, it remains low even after an area expansion of up to 80% in phagocytosis. This is probably the result of membrane insertion from inner stores by exocytosis. We further find that the onset of viscous tension, proportional to the rate of area expansion and caused by the unfurling of plasma membrane wrinkles, is significantly delayed in phagocytosis compared with aspiration. We propose that this is the result of phagocytosis-triggered enzymatic activity that releases spare plasma membrane normally sequestered by velcro-like bonds in a reservoir of surface folds and villi.

Estimating the sensitivity of mechanosensitive ion channels to membrane strain and tension

Bone adapts to its environment by a process in which osteoblasts and osteocytes sense applied mechanical strain. One possible pathway for the detection of strain involves mechanosensitive channels and we sought to determine their sensitivity to membrane strain and tension. We used a combination of experimental and computational modeling techniques to gain new insights into cell mechanics and the regulation of mechanosensitive channels. Using patch-clamp electrophysiology combined with video microscopy, we recorded simultaneously the evolution of membrane extensions into the micropipette, applied pressure, and membrane currents. Nonselective mechanosensitive cation channels with a conductance of 15 pS were observed. Bleb aspiration into the micropipette was simulated using finite element models incorporating the cytoplasm, the actin cortex, the plasma membrane, cellular stiffening in response to strain, and adhesion between the membrane and the micropipette. Using this model, we examine the relative importance of the different cellular components in resisting suction into the pipette and estimate the membrane strains and tensions needed to open mechanosensitive channels. Radial membrane strains of 800% and tensions of 5 10(-4) N.m(-1) were needed to open 50% of mechanosensitive channels. We discuss the relevance of these results in the understanding of cellular reactions to mechanical strain and bone physiology.

Microviscoelasticity of the apical cell surface of human umbilical vein endothelial cells (HUVEC) within confluent monolayers

We studied the local viscoelasticity of the apical membrane of human umbilical vein endothelial cells within confluent layers by magnetic tweezers microrheometry. Magnetic beads are coupled to various integrins by coating with fibronectin or invasin. By analyzing the deflection of beads evoked by various force scenarios we demonstrate that the cell envelope behaves as a linear viscoelastic body if forces up to 2 nN are applied for short times (<20 s) but can respond in an adaptive way if stress pulses are applied longer (>30 s). The time-dependent shear relaxation modulus G(t) exhibits three time regimes: a fast response (t < 0.05 s) where the relaxation modulus G(t) obeys a power law G(t) approximately t(-0.82+/-0.02); a plateau-like behavior (at 0.05 s < t < 0.15 s); and a slow flow-like response which is, however, partially reversible. Strain field mapping experiments with colloidal probes show that local forces induce a strain field exhibiting a range of zeta = 10 +/- 1 microm, but which could only be observed if nonmagnetic beads were coupled to the cell surface by invasin. By application of the theory of elasticity of planar bodies we estimated a surface shear modulus of 2.5 x10(-4) N/m. By assuming a thickness of the actin cortex of approximately 0.5 microm we estimate a Young modulus micro approximately 400 Pa for the apical membrane. The value agrees with a plateau modulus of an entangled or weakly cross-linked actin network of an actin concentration of 100 microM (mesh size 0.2 microm). This result together with our observation of a strong reduction of the shear modulus by the actin destabilizing agent latrunculin A suggests that the shear modulus measured by our technique is determined by the actin cortex. The effect of two ligands inducing actin stress fiber formation and centripetal contraction of cells (associated with the formation of gaps in the confluent cell monolayer) on the viscoelastic responses were studied: histamine and lysophosphatidic acid (LPA). Histamine evoked a dramatic increase of the cell stiffness by >1 order of magnitude within <30 s, which is attributed to a transient rise of the intracellular Ca(2+) level, since DMSO exerted a similar effect. The stiffening is accompanied by a concomitant rounding of the cells as observed by microinterferometry and relaxes partially in the timescale of 5 min, whereas gaps between cells close after approximately 30 min. LPA did not exert a remarkable and reproducible effect other than an occasional very weak transient increase of the shear stiffness, which shows that the gap formation activated by LPA is mediated by a different mechanism than that induced by histamine.

Effects of substrate stiffness on cell morphology, cytoskeletal structure, and adhesion

The morphology and cytoskeletal structure of fibroblasts, endothelial cells, and neutrophils are documented for cells cultured on surfaces with stiffness ranging from 2 to 55,000 Pa that have been laminated with fibronectin or collagen as adhesive ligand. When grown in sparse culture with no cell-cell contacts, fibroblasts and endothelial cells show an abrupt change in spread area that occurs at a stiffness range around 3,000 Pa. No actin stress fibers are seen in fibroblasts on soft surfaces, and the appearance of stress fibers is abrupt and complete at a stiffness range coincident with that at which they spread. Upregulation of alpha5 integrin also occurs in the same stiffness range, but exogenous expression of alpha5 integrin is not sufficient to cause cell spreading on soft surfaces. Neutrophils, in contrast, show no dependence of either resting shape or ability to spread after activation when cultured on surfaces as soft as 2 Pa compared to glass. The shape and cytoskeletal differences evident in single cells on soft compared to hard substrates are eliminated when fibroblasts or endothelial cells make cell-cell contact. These results support the hypothesis that mechanical factors impact different cell types in fundamentally different ways, and can trigger specific changes similar to those stimulated by soluble ligands.

Local force induced conical protrusions of phagocytic cells

Magnetic tweezers were used to study the passive and active response of macrophages to local centripetal nanonewton forces on beta1 integrins. Superparamagnetic beads coated with the beta1-integrin-binding protein invasin were attached to J774 murine macrophages to mimic phagocytosis of bacterial pathogens. Forces exceeding approximately 0.5 nN induce the active formation of trumpet-like protrusions resembling pseudopodia after an initial elastic deflection and a response time of approximately 30 seconds. The speed of advancement of the protrusion is <v>=0.065+/-0.020 micro m second(-1) and is force independent. After saturation (after about 100 seconds) the protrusion stops abruptly and is completely retracted again against forces exceeding 5 nN with an effective relaxation time of approximately 30 seconds. The active protrusion is tentatively attributed to the growth of the actin cortex in the direction of the force, and evidence for the involvement of actin is provided by the finding that Latrunculin A abolishes the activated cone growth. The growth is assumed to be activated by cell signaling mediated by the invasin-specific integrins (exhibiting beta1 chains) and could play a role in phagocytic and protrusive events during immune response by macrophages.

Regulation of cell motility on polymer substrates via "dynamic," cell internalizable, ligand microinterfaces

In vivo, motile epidermal tissues frequently encounter ligand microinterfaces that are dynamic, owing to rapid cell-mediated substrate phagocytosis. In this study, we have examined cell motility phenomena in response to the adhesion ligand, collagen, which was presented on cell-internalizable 400-nm colloidal gold microcarriers. Normal human keratinocytes were seeded onto collagen-adsorbed poly(lactide-co-glycolide) (PLGA) films that were predeposited with varying densities of the ligand-associated microcarriers (LAMs), such that the overall ligand density and the ligand loading per microcarrier were invariant. Cells seeded on LAMs exhibited rapid and distinct cytoskeletal redistribution resulting in numerous filopodial extensions, indicative of activation of cell motility processes. We report that the population-averaged cell migration rate of cells, mu, was increased from 2 microm2/min on collagen substrates lacking the microcarriers, to approximately 50 microm2/min on collagen presenting LAMs. An increase in LAM density to 1.2 LAMs per microm2 was found to maximize mu, as well as the directional persistence and speed of cell migration, whereas very high LAM densities saturated cell internalization and diminished migration rates. The cell-LAM interactions essential to enhanced migration were ligand-activated, as mu; values were reduced 400% on internalizable microcarriers lacking ligands; moreover, cooperative ligand elicitation was possible, for example, when 10 microg/mL soluble fibronectin was introduced as a costimulant of keratinocytes, yielding the highest reported mu values (80 microm2/min) on collagen LAM-PLGA substrates. Notably, cell migration rates were severely repressed when cell internalization processes were challenged through covalent conjugation of ligand carriers to the substrate, indicating that signals from cell-LAM binding alone were inadequate for elevated levels of cell migration. Further analysis indicated that the presence of LAMs did not alter the protease-resistant adhesivity between the cell and the underlying substrate, suggesting that the activation governing ligand interactions likely arose at the cell-LAM interface rather than the cell-substrate interface. This study highlights the novel use of secondary ligand-presenting microscale/nanoscale depots at polymer substrates to elicit, via dynamic cell internalization processes, significantly enhanced levels of cell migration over traditional interfaces with ligand-bearing substrates.

Comparison of filamin A-induced cross-linking and Arp2/3 complex-mediated branching on the mechanics of actin filaments

We compared the effects of human filamin A (FLNa) and the activated human Arp2/3 complex on mechanical properties of actin filaments. As little as 1 FLNa to 800 polymerizing actin monomers induces a sharp concentration-dependent increase in the apparent viscosity of 24 microm actin, a parameter classically defined as a gel point. The activated Arp2/3 complex, at concentrations up to 1:25 actins had no detectable actin gelation activity, even in the presence of phalloidin, to stabilize actin filaments against debranching. Increasing the activated Arp2/3 complex to actin ratio raises the FLNa concentration required to induce actin gelation, an effect ascribable to Arp2/3-mediated actin nucleation resulting in actin filament length diminution. Time lapse video microscopy of microparticles attached to actin filaments or photoactivation of fluorescence revealed actin filament immobilization by FLNa in contrast to diffusion of Arp2/3-branched actin filaments. The experimental results support theories predicting that polymer branching absent cross-linking does not lead to polymer gelation and are consistent with the observation that cells deficient in actin filament cross-linking activity have unstable surfaces. They suggest complementary roles for actin branching and cross-linking in cellular actin mechanics in vivo.

Phagocytosis by Acanthamoeba castellanii: ionic strength dependence of the probability of cell attachment; ingestion and contact seam morphology

The phagocytosis of glutaraldehyde-fixed horse erythrocytes by Acanthamoeba castellanii has been examined in iso-osmolal phosphate buffered saline/sucrose suspending phases of ionic strength, I, ranging from 0.17 to 0.0017. The erythrocytes were exposed, at a ratio of 15:1, to 5x10(6) amoeba in 0.2 ml volumes. The average number of erythrocytes forming a contact with an amoeba over 30 min (T(30)) was well described by T(30)=5.2 exp(-0.112xI(-0.5)). The index of the exponential 'probability of attachment' term may also be expressed in terms of either surface potential (psi(0)) or the Debye length (kappa(-1)). The probability term is formally similar to a Bolzmann factor. Electron microscopy showed that contact spreading of the amoeba over the erythrocyte took place by formation of discrete contacts and that the lateral separation distance between contacts was 0.66, 1.36 and 1.59 &mgr;m for ionic strengths 0.17, 0.052 and 0.0017, respectively. The direction of change in lateral contact separation distance was consistent with published changes in focal contact separation when amoeba move over glass or when human erythrocyte-erythrocyte adhesion occurs in different ionic strength media. The direction was also consistent with interfacial instability theory predictions for the dependence of localised membrane contact formation on interaction potential. The proportion of attached cells that were subsequently ingested correlated more strongly with the number of contacts formed along the cell-cell contact region (seam) than with the seam length at different ionic strengths.

Preparation, stability, and in vitro performance of vesicles made with diblock copolymers

Vesicles made completely from diblock copolymers-polymersomes-can be stably prepared by a wide range of techniques common to liposomes. Processes such as film rehydration, sonication, and extrusion can generate many-micron giants as well as monodisperse, approximately 100 nm vesicles of PEO-PEE (polyethyleneoxide-polyethylethylene) or PEO-PBD (polyethyleneoxide-polybutadiene). These thick-walled vesicles of polymer can encapsulate macromolecules just as liposomes can but, unlike many pure liposome systems, these polymersomes exhibit no in-surface thermal transitions and a subpopulation even survive autoclaving. Suspension in blood plasma has no immediate ill-effect on vesicle stability, and neither adhesion nor stimulation of phagocytes are apparent when giant polymersomes are held in direct, protracted contact. Proliferating cells, in addition, are unaffected when cultured for an extended time with an excess of polymersomes. The effects are consistent with the steric stabilization that PEG-lipid can impart to liposomes, but the present single-component polymersomes are far more stable mechanically and are not limited by PEG-driven micellization. The results potentiate a broad new class of technologically useful, polymer-based vesicles.

Function of Rho family proteins in actin dynamics during phagocytosis and engulfment

Phagocytosis is the uptake of large particles by cells by a mechanism that is based on local rearrangement of the actin microfilament cytoskeleton. In higher organisms, phagocytic cells are essential for host defence against invading pathogens, and phagocytosis contributes to inflammation and the immune response. In addition, engulfment, defined as the phagocytic clearance of cell corpses generated by programmed cell death or apoptosis, has an essential role in tissue homeostasis. Although morphologically distinct phagocytic events can be observed depending on the type of surface receptor engaged, work over the past two years has revealed the essential underlying role of Rho family proteins and their downstream effectors in controlling actin dynamics during phagocytosis.